diff options
Diffstat (limited to 'src/device/dcd.h')
| -rw-r--r-- | src/device/dcd.h | 14 |
1 files changed, 13 insertions, 1 deletions
diff --git a/src/device/dcd.h b/src/device/dcd.h index 66767c1fe..c042cc708 100644 --- a/src/device/dcd.h +++ b/src/device/dcd.h @@ -106,7 +106,14 @@ typedef struct TU_ATTR_ALIGNED(4) void dcd_init (uint8_t rhport); // Interrupt Handler +#if __GNUC__ +#pragma GCC diagnostic push +#pragma GCC diagnostic ignored "-Wredundant-decls" +#endif void dcd_int_handler(uint8_t rhport); +#if __GNUC__ +#pragma GCC diagnostic pop +#endif // Enable device interrupt void dcd_int_enable (uint8_t rhport); @@ -137,6 +144,11 @@ void dcd_edpt0_status_complete(uint8_t rhport, tusb_control_request_t const * re // Configure endpoint's registers according to descriptor bool dcd_edpt_open (uint8_t rhport, tusb_desc_endpoint_t const * desc_ep); +// Close all non-control endpoints, cancel all pending transfers if any. +// Invoked when switching from a non-zero Configuration by SET_CONFIGURE therefore +// required for multiple configuration support. +void dcd_edpt_close_all (uint8_t rhport); + // Close an endpoint. // Since it is weak, caller must TU_ASSERT this function's existence before calling it. void dcd_edpt_close (uint8_t rhport, uint8_t ep_addr) TU_ATTR_WEAK; @@ -148,7 +160,7 @@ bool dcd_edpt_xfer (uint8_t rhport, uint8_t ep_addr, uint8_t * buffer // This API is optional, may be useful for register-based for transferring data. bool dcd_edpt_xfer_fifo (uint8_t rhport, uint8_t ep_addr, tu_fifo_t * ff, uint16_t total_bytes) TU_ATTR_WEAK; -// Stall endpoint +// Stall endpoint, any queuing transfer should be removed from endpoint void dcd_edpt_stall (uint8_t rhport, uint8_t ep_addr); // clear stall, data toggle is also reset to DATA0 |