3 files changed, 8 insertions, 8 deletions
diff --git a/src/device/usbd.c b/src/device/usbd.c
index d5ebcc66b..a664c2186 100644
--- a/src/device/usbd.c
+++ b/src/device/usbd.c
@@ -1410,7 +1410,7 @@ bool usbd_edpt_release(uint8_t rhport, uint8_t ep_addr) {
   return tu_edpt_release(ep_state, _usbd_mutex);
 }
 
-bool usbd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t total_bytes) {
+bool usbd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t total_bytes, bool is_isr) {
   rhport = _usbd_rhport;
 
   uint8_t const epnum = tu_edpt_number(ep_addr);
@@ -1433,7 +1433,7 @@ bool usbd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t t
   // could return and USBD task can preempt and clear the busy
   _usbd_dev.ep_status[epnum][dir].busy = 1;
 
-  if (dcd_edpt_xfer(rhport, ep_addr, buffer, total_bytes, false)) {
+  if (dcd_edpt_xfer(rhport, ep_addr, buffer, total_bytes, is_isr)) {
     return true;
   } else {
     // DCD error, mark endpoint as ready to allow next transfer
@@ -1449,7 +1449,7 @@ bool usbd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t* buffer, uint16_t t
 // bytes should be written and second to keep the return value free to give back a boolean
 // success message. If total_bytes is too big, the FIFO will copy only what is available
 // into the USB buffer!
-bool usbd_edpt_xfer_fifo(uint8_t rhport, uint8_t ep_addr, tu_fifo_t* ff, uint16_t total_bytes) {
+bool usbd_edpt_xfer_fifo(uint8_t rhport, uint8_t ep_addr, tu_fifo_t* ff, uint16_t total_bytes, bool is_isr) {
   rhport = _usbd_rhport;
 
   uint8_t const epnum = tu_edpt_number(ep_addr);
@@ -1464,7 +1464,7 @@ bool usbd_edpt_xfer_fifo(uint8_t rhport, uint8_t ep_addr, tu_fifo_t* ff, uint16_
   // and usbd task can preempt and clear the busy
   _usbd_dev.ep_status[epnum][dir].busy = 1;
 
-  if (dcd_edpt_xfer_fifo(rhport, ep_addr, ff, total_bytes, false)) {
+  if (dcd_edpt_xfer_fifo(rhport, ep_addr, ff, total_bytes, is_isr)) {
     TU_LOG_USBD("OK\r\n");
     return true;
   } else {
diff --git a/src/device/usbd_control.c b/src/device/usbd_control.c
index c9700fd9d..b75362425 100644
--- a/src/device/usbd_control.c
+++ b/src/device/usbd_control.c
@@ -71,7 +71,7 @@ CFG_TUD_MEM_SECTION static struct {
 static inline bool status_stage_xact(uint8_t rhport, const tusb_control_request_t* request) {
   // Opposite to endpoint in Data Phase
   const uint8_t ep_addr = request->bmRequestType_bit.direction ? EDPT_CTRL_OUT : EDPT_CTRL_IN;
-  return usbd_edpt_xfer(rhport, ep_addr, NULL, 0);
+  return usbd_edpt_xfer(rhport, ep_addr, NULL, 0, false);
 }
 
 // Status phase
@@ -98,7 +98,7 @@ static bool data_stage_xact(uint8_t rhport) {
     }
   }
 
-  return usbd_edpt_xfer(rhport, ep_addr, xact_len ? _ctrl_epbuf.buf : NULL, xact_len);
+  return usbd_edpt_xfer(rhport, ep_addr, xact_len ? _ctrl_epbuf.buf : NULL, xact_len, false);
 }
 
 // Transmit data to/from the control endpoint.
diff --git a/src/device/usbd_pvt.h b/src/device/usbd_pvt.h
index a688cf497..a1c884f12 100644
--- a/src/device/usbd_pvt.h
+++ b/src/device/usbd_pvt.h
@@ -84,10 +84,10 @@ bool usbd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const * desc_ep);
 void usbd_edpt_close(uint8_t rhport, uint8_t ep_addr);
 
 // Submit a usb transfer
-bool usbd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes);
+bool usbd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes, bool is_isr);
 
 // Submit a usb ISO transfer by use of a FIFO (ring buffer) - all bytes in FIFO get transmitted
-bool usbd_edpt_xfer_fifo(uint8_t rhport, uint8_t ep_addr, tu_fifo_t * ff, uint16_t total_bytes);
+bool usbd_edpt_xfer_fifo(uint8_t rhport, uint8_t ep_addr, tu_fifo_t * ff, uint16_t total_bytes, bool is_isr);
 
 // Claim an endpoint before submitting a transfer.
 // If caller does not make any transfer, it must release endpoint for others.