diff options
Diffstat (limited to 'src/host')
| -rw-r--r-- | src/host/hcd.h | 5 | ||||
| -rw-r--r-- | src/host/hub.c | 8 | ||||
| -rw-r--r-- | src/host/hub.h | 13 | ||||
| -rw-r--r-- | src/host/usbh.c | 876 | ||||
| -rw-r--r-- | src/host/usbh.h | 18 | ||||
| -rw-r--r-- | src/host/usbh_pvt.h | 6 |
6 files changed, 464 insertions, 462 deletions
diff --git a/src/host/hcd.h b/src/host/hcd.h index 2bde289df..5547c7cc5 100644 --- a/src/host/hcd.h +++ b/src/host/hcd.h @@ -125,11 +125,14 @@ bool hcd_dcache_clean_invalidate(void const* addr, uint32_t data_size) TU_ATTR_W //--------------------------------------------------------------------+ // optional hcd configuration, called by tuh_configure() -bool hcd_configure(uint8_t rhport, uint32_t cfg_id, const void* cfg_param) TU_ATTR_WEAK; +bool hcd_configure(uint8_t rhport, uint32_t cfg_id, const void* cfg_param); // Initialize controller to host mode bool hcd_init(uint8_t rhport); +// De-initialize controller +bool hcd_deinit(uint8_t rhport); + // Interrupt Handler void hcd_int_handler(uint8_t rhport, bool in_isr); diff --git a/src/host/hub.c b/src/host/hub.c index 3bac18698..e97014443 100644 --- a/src/host/hub.c +++ b/src/host/hub.c @@ -182,9 +182,13 @@ bool hub_port_get_status(uint8_t hub_addr, uint8_t hub_port, void* resp, //--------------------------------------------------------------------+ // CLASS-USBH API (don't require to verify parameters) //--------------------------------------------------------------------+ -void hub_init(void) -{ +bool hub_init(void) { tu_memclr(hub_data, sizeof(hub_data)); + return true; +} + +bool hub_deinit(void) { + return true; } bool hub_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_interface_t const *itf_desc, uint16_t max_len) diff --git a/src/host/hub.h b/src/host/hub.h index 390740e1f..385efe6b2 100644 --- a/src/host/hub.h +++ b/src/host/hub.h @@ -187,16 +187,14 @@ bool hub_port_get_status (uint8_t hub_addr, uint8_t hub_port, void* resp, bool hub_edpt_status_xfer(uint8_t dev_addr); // Reset a port -static inline bool hub_port_reset(uint8_t hub_addr, uint8_t hub_port, - tuh_xfer_cb_t complete_cb, uintptr_t user_data) -{ +TU_ATTR_ALWAYS_INLINE static inline +bool hub_port_reset(uint8_t hub_addr, uint8_t hub_port, tuh_xfer_cb_t complete_cb, uintptr_t user_data) { return hub_port_set_feature(hub_addr, hub_port, HUB_FEATURE_PORT_RESET, complete_cb, user_data); } // Clear Reset Change -static inline bool hub_port_clear_reset_change(uint8_t hub_addr, uint8_t hub_port, - tuh_xfer_cb_t complete_cb, uintptr_t user_data) -{ +TU_ATTR_ALWAYS_INLINE static inline +bool hub_port_clear_reset_change(uint8_t hub_addr, uint8_t hub_port, tuh_xfer_cb_t complete_cb, uintptr_t user_data) { return hub_port_clear_feature(hub_addr, hub_port, HUB_FEATURE_PORT_RESET_CHANGE, complete_cb, user_data); } @@ -204,7 +202,8 @@ static inline bool hub_port_clear_reset_change(uint8_t hub_addr, uint8_t hub_por //--------------------------------------------------------------------+ // Internal Class Driver API //--------------------------------------------------------------------+ -void hub_init (void); +bool hub_init (void); +bool hub_deinit (void); bool hub_open (uint8_t rhport, uint8_t dev_addr, tusb_desc_interface_t const *itf_desc, uint16_t max_len); bool hub_set_config (uint8_t dev_addr, uint8_t itf_num); bool hub_xfer_cb (uint8_t dev_addr, uint8_t ep_addr, xfer_result_t event, uint32_t xferred_bytes); diff --git a/src/host/usbh.c b/src/host/usbh.c index dfe6ddb42..aa0603d47 100644 --- a/src/host/usbh.c +++ b/src/host/usbh.c @@ -45,8 +45,20 @@ #endif //--------------------------------------------------------------------+ -// Callback weak stubs (called if application does not provide) +// Weak stubs: invoked if no strong implementation is available //--------------------------------------------------------------------+ +TU_ATTR_WEAK bool hcd_deinit(uint8_t rhport) { + (void) rhport; + return false; +} + +TU_ATTR_WEAK bool hcd_configure(uint8_t rhport, uint32_t cfg_id, const void* cfg_param) { + (void) rhport; + (void) cfg_id; + (void) cfg_param; + return false; +} + TU_ATTR_WEAK void tuh_event_hook_cb(uint8_t rhport, uint32_t eventid, bool in_isr) { (void) rhport; (void) eventid; @@ -119,16 +131,17 @@ typedef struct { // MACRO CONSTANT TYPEDEF //--------------------------------------------------------------------+ #if CFG_TUSB_DEBUG >= CFG_TUH_LOG_LEVEL - #define DRIVER_NAME(_name) .name = _name, + #define DRIVER_NAME(_name) _name #else - #define DRIVER_NAME(_name) + #define DRIVER_NAME(_name) NULL #endif static usbh_class_driver_t const usbh_class_drivers[] = { #if CFG_TUH_CDC { - DRIVER_NAME("CDC") + .name = DRIVER_NAME("CDC"), .init = cdch_init, + .deinit = cdch_deinit, .open = cdch_open, .set_config = cdch_set_config, .xfer_cb = cdch_xfer_cb, @@ -138,8 +151,9 @@ static usbh_class_driver_t const usbh_class_drivers[] = { #if CFG_TUH_MSC { - DRIVER_NAME("MSC") + .name = DRIVER_NAME("MSC"), .init = msch_init, + .deinit = msch_deinit, .open = msch_open, .set_config = msch_set_config, .xfer_cb = msch_xfer_cb, @@ -149,8 +163,9 @@ static usbh_class_driver_t const usbh_class_drivers[] = { #if CFG_TUH_HID { - DRIVER_NAME("HID") + .name = DRIVER_NAME("HID"), .init = hidh_init, + .deinit = hidh_deinit, .open = hidh_open, .set_config = hidh_set_config, .xfer_cb = hidh_xfer_cb, @@ -160,8 +175,9 @@ static usbh_class_driver_t const usbh_class_drivers[] = { #if CFG_TUH_HUB { - DRIVER_NAME("HUB") + .name = DRIVER_NAME("HUB"), .init = hub_init, + .deinit = hub_deinit, .open = hub_open, .set_config = hub_set_config, .xfer_cb = hub_xfer_cb, @@ -171,9 +187,11 @@ static usbh_class_driver_t const usbh_class_drivers[] = { #if CFG_TUH_VENDOR { - DRIVER_NAME("VENDOR") + .name = DRIVER_NAME("VENDOR"), .init = cush_init, - .open = cush_open_subtask, + .deinit = cush_deinit, + .open = cush_open, + .set_config = cush_set_config, .xfer_cb = cush_isr, .close = cush_close } @@ -321,11 +339,7 @@ bool tuh_rhport_reset_bus(uint8_t rhport, bool active) { //--------------------------------------------------------------------+ bool tuh_configure(uint8_t rhport, uint32_t cfg_id, const void *cfg_param) { - if ( hcd_configure ) { - return hcd_configure(rhport, cfg_id, cfg_param); - } else { - return false; - } + return hcd_configure(rhport, cfg_id, cfg_param); } static void clear_device(usbh_device_t* dev) { @@ -338,55 +352,94 @@ bool tuh_inited(void) { return _usbh_controller != TUSB_INDEX_INVALID_8; } -bool tuh_init(uint8_t controller_id) { +bool tuh_init(uint8_t rhport) { // skip if already initialized - if ( tuh_inited() ) return true; + if (tuh_rhport_is_active(rhport)) return true; - TU_LOG_USBH("USBH init on controller %u\r\n", controller_id); - TU_LOG_INT(CFG_TUH_LOG_LEVEL, sizeof(usbh_device_t)); - TU_LOG_INT(CFG_TUH_LOG_LEVEL, sizeof(hcd_event_t)); - TU_LOG_INT(CFG_TUH_LOG_LEVEL, sizeof(_ctrl_xfer)); - TU_LOG_INT(CFG_TUH_LOG_LEVEL, sizeof(tuh_xfer_t)); - TU_LOG_INT(CFG_TUH_LOG_LEVEL, sizeof(tu_fifo_t)); - TU_LOG_INT(CFG_TUH_LOG_LEVEL, sizeof(tu_edpt_stream_t)); + TU_LOG_USBH("USBH init on controller %u\r\n", rhport); - // Event queue - _usbh_q = osal_queue_create( &_usbh_qdef ); - TU_ASSERT(_usbh_q != NULL); + // Init host stack if not already + if (!tuh_inited()) { + TU_LOG_INT_USBH(sizeof(usbh_device_t)); + TU_LOG_INT_USBH(sizeof(hcd_event_t)); + TU_LOG_INT_USBH(sizeof(_ctrl_xfer)); + TU_LOG_INT_USBH(sizeof(tuh_xfer_t)); + TU_LOG_INT_USBH(sizeof(tu_fifo_t)); + TU_LOG_INT_USBH(sizeof(tu_edpt_stream_t)); + + // Event queue + _usbh_q = osal_queue_create(&_usbh_qdef); + TU_ASSERT(_usbh_q != NULL); #if OSAL_MUTEX_REQUIRED - // Init mutex - _usbh_mutex = osal_mutex_create(&_usbh_mutexdef); - TU_ASSERT(_usbh_mutex); + // Init mutex + _usbh_mutex = osal_mutex_create(&_usbh_mutexdef); + TU_ASSERT(_usbh_mutex); #endif - // Get application driver if available - if ( usbh_app_driver_get_cb ) { - _app_driver = usbh_app_driver_get_cb(&_app_driver_count); - } + // Get application driver if available + if (usbh_app_driver_get_cb) { + _app_driver = usbh_app_driver_get_cb(&_app_driver_count); + } - // Device - tu_memclr(&_dev0, sizeof(_dev0)); - tu_memclr(_usbh_devices, sizeof(_usbh_devices)); - tu_memclr(&_ctrl_xfer, sizeof(_ctrl_xfer)); + // Device + tu_memclr(&_dev0, sizeof(_dev0)); + tu_memclr(_usbh_devices, sizeof(_usbh_devices)); + tu_memclr(&_ctrl_xfer, sizeof(_ctrl_xfer)); - for(uint8_t i=0; i<TOTAL_DEVICES; i++) { - clear_device(&_usbh_devices[i]); - } + for (uint8_t i = 0; i < TOTAL_DEVICES; i++) { + clear_device(&_usbh_devices[i]); + } - // Class drivers - for (uint8_t drv_id = 0; drv_id < TOTAL_DRIVER_COUNT; drv_id++) { - usbh_class_driver_t const* driver = get_driver(drv_id); - if (driver) { - TU_LOG_USBH("%s init\r\n", driver->name); - driver->init(); + // Class drivers + for (uint8_t drv_id = 0; drv_id < TOTAL_DRIVER_COUNT; drv_id++) { + usbh_class_driver_t const* driver = get_driver(drv_id); + if (driver) { + TU_LOG_USBH("%s init\r\n", driver->name); + driver->init(); + } } } - _usbh_controller = controller_id;; + // Init host controller + _usbh_controller = rhport;; + TU_ASSERT(hcd_init(rhport)); + hcd_int_enable(rhport); + + return true; +} + +bool tuh_deinit(uint8_t rhport) { + if (!tuh_rhport_is_active(rhport)) return true; + + // deinit host controller + hcd_int_disable(rhport); + hcd_deinit(rhport); + _usbh_controller = TUSB_INDEX_INVALID_8; - TU_ASSERT(hcd_init(controller_id)); - hcd_int_enable(controller_id); + // "unplug" all devices on this rhport (hub_addr = 0, hub_port = 0) + process_removing_device(rhport, 0, 0); + + // deinit host stack if no controller is active + if (!tuh_inited()) { + // Class drivers + for (uint8_t drv_id = 0; drv_id < TOTAL_DRIVER_COUNT; drv_id++) { + usbh_class_driver_t const* driver = get_driver(drv_id); + if (driver) { + TU_LOG_USBH("%s deinit\r\n", driver->name); + driver->deinit(); + } + } + + osal_queue_delete(_usbh_q); + _usbh_q = NULL; + + #if OSAL_MUTEX_REQUIRED + // TODO make sure there is no task waiting on this mutex + osal_mutex_delete(_usbh_mutex); + _usbh_mutex = NULL; + #endif + } return true; } @@ -420,20 +473,18 @@ void tuh_task_ext(uint32_t timeout_ms, bool in_isr) { (void) in_isr; // not implemented yet // Skip if stack is not initialized - if ( !tuh_inited() ) return; + if (!tuh_inited()) return; // Loop until there is no more events in the queue - while (1) - { + while (1) { hcd_event_t event; - if ( !osal_queue_receive(_usbh_q, &event, timeout_ms) ) return; + if (!osal_queue_receive(_usbh_q, &event, timeout_ms)) return; - switch (event.event_id) - { + switch (event.event_id) { case HCD_EVENT_DEVICE_ATTACH: // due to the shared _usbh_ctrl_buf, we must complete enumerating one device before enumerating another one. // TODO better to have an separated queue for newly attached devices - if ( _dev0.enumerating ) { + if (_dev0.enumerating) { TU_LOG_USBH("[%u:] USBH Defer Attach until current enumeration complete\r\n", event.rhport); bool is_empty = osal_queue_empty(_usbh_q); @@ -443,12 +494,12 @@ void tuh_task_ext(uint32_t timeout_ms, bool in_isr) { // Exit if this is the only event in the queue, otherwise we may loop forever return; } - }else { + } else { TU_LOG_USBH("[%u:] USBH DEVICE ATTACH\r\n", event.rhport); _dev0.enumerating = 1; enum_new_device(&event); } - break; + break; case HCD_EVENT_DEVICE_REMOVE: TU_LOG_USBH("[%u:%u:%u] USBH DEVICE REMOVED\r\n", event.rhport, event.connection.hub_addr, event.connection.hub_port); @@ -456,37 +507,34 @@ void tuh_task_ext(uint32_t timeout_ms, bool in_isr) { #if CFG_TUH_HUB // TODO remove - if ( event.connection.hub_addr != 0 && event.connection.hub_port != 0) { + if (event.connection.hub_addr != 0 && event.connection.hub_port != 0) { // done with hub, waiting for next data on status pipe - (void) hub_edpt_status_xfer( event.connection.hub_addr ); + (void) hub_edpt_status_xfer(event.connection.hub_addr); } #endif - break; + break; - case HCD_EVENT_XFER_COMPLETE: - { + case HCD_EVENT_XFER_COMPLETE: { uint8_t const ep_addr = event.xfer_complete.ep_addr; - uint8_t const epnum = tu_edpt_number(ep_addr); - uint8_t const ep_dir = tu_edpt_dir(ep_addr); + uint8_t const epnum = tu_edpt_number(ep_addr); + uint8_t const ep_dir = (uint8_t) tu_edpt_dir(ep_addr); - TU_LOG_USBH("on EP %02X with %u bytes: %s\r\n", ep_addr, (unsigned int) event.xfer_complete.len, - tu_str_xfer_result[event.xfer_complete.result]); + TU_LOG_USBH("on EP %02X with %u bytes: %s\r\n", ep_addr, (unsigned int) event.xfer_complete.len, tu_str_xfer_result[event.xfer_complete.result]); if (event.dev_addr == 0) { // device 0 only has control endpoint - TU_ASSERT(epnum == 0, ); + TU_ASSERT(epnum == 0,); usbh_control_xfer_cb(event.dev_addr, ep_addr, (xfer_result_t) event.xfer_complete.result, event.xfer_complete.len); } else { usbh_device_t* dev = get_device(event.dev_addr); - TU_VERIFY(dev && dev->connected, ); + TU_VERIFY(dev && dev->connected,); - dev->ep_status[epnum][ep_dir].busy = 0; + dev->ep_status[epnum][ep_dir].busy = 0; dev->ep_status[epnum][ep_dir].claimed = 0; - if ( 0 == epnum ) { - usbh_control_xfer_cb(event.dev_addr, ep_addr, (xfer_result_t) event.xfer_complete.result, - event.xfer_complete.len); - }else { + if (0 == epnum) { + usbh_control_xfer_cb(event.dev_addr, ep_addr, (xfer_result_t) event.xfer_complete.result, event.xfer_complete.len); + } else { // Prefer application callback over built-in one if available. This occurs when tuh_edpt_xfer() is used // with enabled driver e.g HID endpoint #if CFG_TUH_API_EDPT_XFER @@ -503,35 +551,32 @@ void tuh_task_ext(uint32_t timeout_ms, bool in_isr) { .complete_cb = complete_cb, .user_data = dev->ep_callback[epnum][ep_dir].user_data }; - complete_cb(&xfer); }else #endif { uint8_t drv_id = dev->ep2drv[epnum][ep_dir]; - usbh_class_driver_t const * driver = get_driver(drv_id); - if ( driver ) - { + usbh_class_driver_t const* driver = get_driver(drv_id); + if (driver) { TU_LOG_USBH("%s xfer callback\r\n", driver->name); driver->xfer_cb(event.dev_addr, ep_addr, (xfer_result_t) event.xfer_complete.result, event.xfer_complete.len); - } - else - { + } else { // no driver/callback responsible for this transfer TU_ASSERT(false,); } } } } + break; } - break; case USBH_EVENT_FUNC_CALL: - if ( event.func_call.func ) event.func_call.func(event.func_call.param); - break; + if (event.func_call.func) event.func_call.func(event.func_call.param); + break; - default: break; + default: + break; } #if CFG_TUSB_OS != OPT_OS_NONE && CFG_TUSB_OS != OPT_OS_PICO @@ -588,8 +633,7 @@ bool tuh_control_xfer (tuh_xfer_t* xfer) { TU_LOG_USBH("[%u:%u] %s: ", rhport, daddr, (xfer->setup->bmRequestType_bit.type == TUSB_REQ_TYPE_STANDARD && xfer->setup->bRequest <= TUSB_REQ_SYNCH_FRAME) ? tu_str_std_request[xfer->setup->bRequest] : "Class Request"); - TU_LOG_BUF(CFG_TUH_LOG_LEVEL, xfer->setup, 8); - TU_LOG_USBH("\r\n"); + TU_LOG_BUF_USBH(xfer->setup, 8); if (xfer->complete_cb) { TU_ASSERT( hcd_setup_send(rhport, daddr, (uint8_t const*) &_ctrl_xfer.request) ); @@ -630,7 +674,7 @@ TU_ATTR_ALWAYS_INLINE static inline void _set_control_xfer_stage(uint8_t stage) (void) osal_mutex_unlock(_usbh_mutex); } -static void _xfer_complete(uint8_t daddr, xfer_result_t result) { +static void _control_xfer_complete(uint8_t daddr, xfer_result_t result) { TU_LOG_USBH("\r\n"); // duplicate xfer since user can execute control transfer within callback @@ -653,46 +697,56 @@ static void _xfer_complete(uint8_t daddr, xfer_result_t result) { } } -static bool usbh_control_xfer_cb (uint8_t dev_addr, uint8_t ep_addr, xfer_result_t result, uint32_t xferred_bytes) { +static bool usbh_control_xfer_cb (uint8_t daddr, uint8_t ep_addr, xfer_result_t result, uint32_t xferred_bytes) { (void) ep_addr; - const uint8_t rhport = usbh_get_rhport(dev_addr); + const uint8_t rhport = usbh_get_rhport(daddr); tusb_control_request_t const * request = &_ctrl_xfer.request; if (XFER_RESULT_SUCCESS != result) { - TU_LOG1("[%u:%u] Control %s, xferred_bytes = %lu\r\n", rhport, dev_addr, result == XFER_RESULT_STALLED ? "STALLED" : "FAILED", xferred_bytes); - TU_LOG1_BUF(request, 8); - TU_LOG1("\r\n"); + TU_LOG_USBH("[%u:%u] Control %s, xferred_bytes = %lu\r\n", rhport, daddr, result == XFER_RESULT_STALLED ? "STALLED" : "FAILED", xferred_bytes); + TU_LOG_BUF_USBH(request, 8); // terminate transfer if any stage failed - _xfer_complete(dev_addr, result); + _control_xfer_complete(daddr, result); }else { switch(_ctrl_xfer.stage) { case CONTROL_STAGE_SETUP: if (request->wLength) { // DATA stage: initial data toggle is always 1 _set_control_xfer_stage(CONTROL_STAGE_DATA); - TU_ASSERT( hcd_edpt_xfer(rhport, dev_addr, tu_edpt_addr(0, request->bmRequestType_bit.direction), _ctrl_xfer.buffer, request->wLength) ); + TU_ASSERT( hcd_edpt_xfer(rhport, daddr, tu_edpt_addr(0, request->bmRequestType_bit.direction), _ctrl_xfer.buffer, request->wLength) ); return true; } TU_ATTR_FALLTHROUGH; case CONTROL_STAGE_DATA: if (request->wLength) { - TU_LOG_USBH("[%u:%u] Control data:\r\n", rhport, dev_addr); - TU_LOG_MEM(CFG_TUH_LOG_LEVEL, _ctrl_xfer.buffer, xferred_bytes, 2); + TU_LOG_USBH("[%u:%u] Control data:\r\n", rhport, daddr); + TU_LOG_MEM_USBH(_ctrl_xfer.buffer, xferred_bytes, 2); } _ctrl_xfer.actual_len = (uint16_t) xferred_bytes; // ACK stage: toggle is always 1 _set_control_xfer_stage(CONTROL_STAGE_ACK); - TU_ASSERT( hcd_edpt_xfer(rhport, dev_addr, tu_edpt_addr(0, 1-request->bmRequestType_bit.direction), NULL, 0) ); - break; + TU_ASSERT( hcd_edpt_xfer(rhport, daddr, tu_edpt_addr(0, 1 - request->bmRequestType_bit.direction), NULL, 0) ); + break; - case CONTROL_STAGE_ACK: - _xfer_complete(dev_addr, result); - break; + case CONTROL_STAGE_ACK: { + // Abort all pending transfers if SET_CONFIGURATION request + // NOTE: should we force closing all non-control endpoints in the future? + if (request->bRequest == TUSB_REQ_SET_CONFIGURATION && request->bmRequestType == 0x00) { + for(uint8_t epnum=1; epnum<CFG_TUH_ENDPOINT_MAX; epnum++) { + for(uint8_t dir=0; dir<2; dir++) { + tuh_edpt_abort_xfer(daddr, tu_edpt_addr(epnum, dir)); + } + } + } + + _control_xfer_complete(daddr, result); + break; + } default: return false; } @@ -710,7 +764,6 @@ bool tuh_edpt_xfer(tuh_xfer_t* xfer) { uint8_t const ep_addr = xfer->ep_addr; TU_VERIFY(daddr && ep_addr); - TU_VERIFY(usbh_edpt_claim(daddr, ep_addr)); if (!usbh_edpt_xfer_with_callback(daddr, ep_addr, xfer->buffer, (uint16_t) xfer->buflen, @@ -743,7 +796,7 @@ bool tuh_edpt_abort_xfer(uint8_t daddr, uint8_t ep_addr) { TU_VERIFY(hcd_edpt_abort_xfer(dev->rhport, daddr, ep_addr)); // mark as ready and release endpoint if transfer is aborted dev->ep_status[epnum][dir].busy = false; - usbh_edpt_release(daddr, ep_addr); + tu_edpt_release(&dev->ep_status[epnum][dir], _usbh_mutex); } return true; @@ -785,14 +838,13 @@ void usbh_defer_func(osal_task_func_t func, void *param, bool in_isr) { //--------------------------------------------------------------------+ // Claim an endpoint for transfer -bool usbh_edpt_claim(uint8_t dev_addr, uint8_t ep_addr) -{ +bool usbh_edpt_claim(uint8_t dev_addr, uint8_t ep_addr) { // Note: addr0 only use tuh_control_xfer usbh_device_t* dev = get_device(dev_addr); TU_ASSERT(dev && dev->connected); uint8_t const epnum = tu_edpt_number(ep_addr); - uint8_t const dir = tu_edpt_dir(ep_addr); + uint8_t const dir = tu_edpt_dir(ep_addr); TU_VERIFY(tu_edpt_claim(&dev->ep_status[epnum][dir], _usbh_mutex)); TU_LOG_USBH("[%u] Claimed EP 0x%02x\r\n", dev_addr, ep_addr); @@ -801,14 +853,13 @@ bool usbh_edpt_claim(uint8_t dev_addr, uint8_t ep_addr) } // Release an claimed endpoint due to failed transfer attempt -bool usbh_edpt_release(uint8_t dev_addr, uint8_t ep_addr) -{ +bool usbh_edpt_release(uint8_t dev_addr, uint8_t ep_addr) { // Note: addr0 only use tuh_control_xfer usbh_device_t* dev = get_device(dev_addr); TU_VERIFY(dev && dev->connected); uint8_t const epnum = tu_edpt_number(ep_addr); - uint8_t const dir = tu_edpt_dir(ep_addr); + uint8_t const dir = tu_edpt_dir(ep_addr); TU_VERIFY(tu_edpt_release(&dev->ep_status[epnum][dir], _usbh_mutex)); TU_LOG_USBH("[%u] Released EP 0x%02x\r\n", dev_addr, ep_addr); @@ -818,9 +869,8 @@ bool usbh_edpt_release(uint8_t dev_addr, uint8_t ep_addr) // Submit an transfer // TODO call usbh_edpt_release if failed -bool usbh_edpt_xfer_with_callback(uint8_t dev_addr, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes, - tuh_xfer_cb_t complete_cb, uintptr_t user_data) -{ +bool usbh_edpt_xfer_with_callback(uint8_t dev_addr, uint8_t ep_addr, uint8_t* buffer, uint16_t total_bytes, + tuh_xfer_cb_t complete_cb, uintptr_t user_data) { (void) complete_cb; (void) user_data; @@ -828,7 +878,7 @@ bool usbh_edpt_xfer_with_callback(uint8_t dev_addr, uint8_t ep_addr, uint8_t * b TU_VERIFY(dev); uint8_t const epnum = tu_edpt_number(ep_addr); - uint8_t const dir = tu_edpt_dir(ep_addr); + uint8_t const dir = tu_edpt_dir(ep_addr); tu_edpt_state_t* ep_state = &dev->ep_status[epnum][dir]; TU_LOG_USBH(" Queue EP %02X with %u bytes ... \r\n", ep_addr, total_bytes); @@ -845,14 +895,12 @@ bool usbh_edpt_xfer_with_callback(uint8_t dev_addr, uint8_t ep_addr, uint8_t * b dev->ep_callback[epnum][dir].user_data = user_data; #endif - if ( hcd_edpt_xfer(dev->rhport, dev_addr, ep_addr, buffer, total_bytes) ) - { + if (hcd_edpt_xfer(dev->rhport, dev_addr, ep_addr, buffer, total_bytes)) { TU_LOG_USBH("OK\r\n"); return true; - }else - { + } else { // HCD error, mark endpoint as ready to allow next transfer - ep_state->busy = 0; + ep_state->busy = 0; ep_state->claimed = 0; TU_LOG1("Failed\r\n"); // TU_BREAKPOINT(); @@ -860,12 +908,9 @@ bool usbh_edpt_xfer_with_callback(uint8_t dev_addr, uint8_t ep_addr, uint8_t * b } } -static bool usbh_edpt_control_open(uint8_t dev_addr, uint8_t max_packet_size) -{ +static bool usbh_edpt_control_open(uint8_t dev_addr, uint8_t max_packet_size) { TU_LOG_USBH("[%u:%u] Open EP0 with Size = %u\r\n", usbh_get_rhport(dev_addr), dev_addr, max_packet_size); - - tusb_desc_endpoint_t ep0_desc = - { + tusb_desc_endpoint_t ep0_desc = { .bLength = sizeof(tusb_desc_endpoint_t), .bDescriptorType = TUSB_DESC_ENDPOINT, .bEndpointAddress = 0, @@ -877,10 +922,8 @@ static bool usbh_edpt_control_open(uint8_t dev_addr, uint8_t max_packet_size) return hcd_edpt_open(usbh_get_rhport(dev_addr), dev_addr, &ep0_desc); } -bool tuh_edpt_open(uint8_t dev_addr, tusb_desc_endpoint_t const * desc_ep) -{ - TU_ASSERT( tu_edpt_validate(desc_ep, tuh_speed_get(dev_addr)) ); - +bool tuh_edpt_open(uint8_t dev_addr, tusb_desc_endpoint_t const* desc_ep) { + TU_ASSERT(tu_edpt_validate(desc_ep, tuh_speed_get(dev_addr))); return hcd_edpt_open(usbh_get_rhport(dev_addr), dev_addr, desc_ep); } @@ -889,7 +932,7 @@ bool usbh_edpt_busy(uint8_t dev_addr, uint8_t ep_addr) { TU_VERIFY(dev); uint8_t const epnum = tu_edpt_number(ep_addr); - uint8_t const dir = tu_edpt_dir(ep_addr); + uint8_t const dir = tu_edpt_dir(ep_addr); return dev->ep_status[epnum][dir].busy; } @@ -898,22 +941,18 @@ bool usbh_edpt_busy(uint8_t dev_addr, uint8_t ep_addr) { // HCD Event Handler //--------------------------------------------------------------------+ -void hcd_devtree_get_info(uint8_t dev_addr, hcd_devtree_info_t* devtree_info) -{ +void hcd_devtree_get_info(uint8_t dev_addr, hcd_devtree_info_t* devtree_info) { usbh_device_t const* dev = get_device(dev_addr); - - if (dev) - { - devtree_info->rhport = dev->rhport; + if (dev) { + devtree_info->rhport = dev->rhport; devtree_info->hub_addr = dev->hub_addr; devtree_info->hub_port = dev->hub_port; - devtree_info->speed = dev->speed; - }else - { - devtree_info->rhport = _dev0.rhport; + devtree_info->speed = dev->speed; + } else { + devtree_info->rhport = _dev0.rhport; devtree_info->hub_addr = _dev0.hub_addr; devtree_info->hub_port = _dev0.hub_port; - devtree_info->speed = _dev0.speed; + devtree_info->speed = _dev0.speed; } } @@ -943,12 +982,9 @@ TU_ATTR_FAST_FUNC void hcd_event_handler(hcd_event_t const* event, bool in_isr) // generic helper to get a descriptor // if blocking, user_data is pointed to xfer_result static bool _get_descriptor(uint8_t daddr, uint8_t type, uint8_t index, uint16_t language_id, void* buffer, uint16_t len, - tuh_xfer_cb_t complete_cb, uintptr_t user_data) -{ - tusb_control_request_t const request = - { - .bmRequestType_bit = - { + tuh_xfer_cb_t complete_cb, uintptr_t user_data) { + tusb_control_request_t const request = { + .bmRequestType_bit = { .recipient = TUSB_REQ_RCPT_DEVICE, .type = TUSB_REQ_TYPE_STANDARD, .direction = TUSB_DIR_IN @@ -958,9 +994,7 @@ static bool _get_descriptor(uint8_t daddr, uint8_t type, uint8_t index, uint16_t .wIndex = tu_htole16(language_id), .wLength = tu_htole16(len) }; - - tuh_xfer_t xfer = - { + tuh_xfer_t xfer = { .daddr = daddr, .ep_addr = 0, .setup = &request, @@ -973,29 +1007,25 @@ static bool _get_descriptor(uint8_t daddr, uint8_t type, uint8_t index, uint16_t } bool tuh_descriptor_get(uint8_t daddr, uint8_t type, uint8_t index, void* buffer, uint16_t len, - tuh_xfer_cb_t complete_cb, uintptr_t user_data) -{ + tuh_xfer_cb_t complete_cb, uintptr_t user_data) { return _get_descriptor(daddr, type, index, 0x0000, buffer, len, complete_cb, user_data); } bool tuh_descriptor_get_device(uint8_t daddr, void* buffer, uint16_t len, - tuh_xfer_cb_t complete_cb, uintptr_t user_data) -{ + tuh_xfer_cb_t complete_cb, uintptr_t user_data) { len = tu_min16(len, sizeof(tusb_desc_device_t)); return tuh_descriptor_get(daddr, TUSB_DESC_DEVICE, 0, buffer, len, complete_cb, user_data); } bool tuh_descriptor_get_configuration(uint8_t daddr, uint8_t index, void* buffer, uint16_t len, - tuh_xfer_cb_t complete_cb, uintptr_t user_data) -{ + tuh_xfer_cb_t complete_cb, uintptr_t user_data) { return tuh_descriptor_get(daddr, TUSB_DESC_CONFIGURATION, index, buffer, len, complete_cb, user_data); } //------------- String Descriptor -------------// bool tuh_descriptor_get_string(uint8_t daddr, uint8_t index, uint16_t language_id, void* buffer, uint16_t len, - tuh_xfer_cb_t complete_cb, uintptr_t user_data) -{ + tuh_xfer_cb_t complete_cb, uintptr_t user_data) { return _get_descriptor(daddr, TUSB_DESC_STRING, index, language_id, buffer, len, complete_cb, user_data); } @@ -1010,8 +1040,7 @@ bool tuh_descriptor_get_manufacturer_string(uint8_t daddr, uint16_t language_id, // Get product string descriptor bool tuh_descriptor_get_product_string(uint8_t daddr, uint16_t language_id, void* buffer, uint16_t len, - tuh_xfer_cb_t complete_cb, uintptr_t user_data) -{ + tuh_xfer_cb_t complete_cb, uintptr_t user_data) { usbh_device_t const* dev = get_device(daddr); TU_VERIFY(dev && dev->i_product); return tuh_descriptor_get_string(daddr, dev->i_product, language_id, buffer, len, complete_cb, user_data); @@ -1019,8 +1048,7 @@ bool tuh_descriptor_get_product_string(uint8_t daddr, uint16_t language_id, void // Get serial string descriptor bool tuh_descriptor_get_serial_string(uint8_t daddr, uint16_t language_id, void* buffer, uint16_t len, - tuh_xfer_cb_t complete_cb, uintptr_t user_data) -{ + tuh_xfer_cb_t complete_cb, uintptr_t user_data) { usbh_device_t const* dev = get_device(daddr); TU_VERIFY(dev && dev->i_serial); return tuh_descriptor_get_string(daddr, dev->i_serial, language_id, buffer, len, complete_cb, user_data); @@ -1029,95 +1057,78 @@ bool tuh_descriptor_get_serial_string(uint8_t daddr, uint16_t language_id, void* // Get HID report descriptor // if blocking, user_data is pointed to xfer_result bool tuh_descriptor_get_hid_report(uint8_t daddr, uint8_t itf_num, uint8_t desc_type, uint8_t index, void* buffer, uint16_t len, - tuh_xfer_cb_t complete_cb, uintptr_t user_data) -{ + tuh_xfer_cb_t complete_cb, uintptr_t user_data) { TU_LOG_USBH("HID Get Report Descriptor\r\n"); - tusb_control_request_t const request = - { - .bmRequestType_bit = - { - .recipient = TUSB_REQ_RCPT_INTERFACE, - .type = TUSB_REQ_TYPE_STANDARD, - .direction = TUSB_DIR_IN - }, - .bRequest = TUSB_REQ_GET_DESCRIPTOR, - .wValue = tu_htole16(TU_U16(desc_type, index)), - .wIndex = tu_htole16((uint16_t) itf_num), - .wLength = len + tusb_control_request_t const request = { + .bmRequestType_bit = { + .recipient = TUSB_REQ_RCPT_INTERFACE, + .type = TUSB_REQ_TYPE_STANDARD, + .direction = TUSB_DIR_IN + }, + .bRequest = TUSB_REQ_GET_DESCRIPTOR, + .wValue = tu_htole16(TU_U16(desc_type, index)), + .wIndex = tu_htole16((uint16_t) itf_num), + .wLength = len }; - - tuh_xfer_t xfer = - { - .daddr = daddr, - .ep_addr = 0, - .setup = &request, - .buffer = buffer, - .complete_cb = complete_cb, - .user_data = user_data + tuh_xfer_t xfer = { + .daddr = daddr, + .ep_addr = 0, + .setup = &request, + .buffer = buffer, + .complete_cb = complete_cb, + .user_data = user_data }; return tuh_control_xfer(&xfer); } bool tuh_configuration_set(uint8_t daddr, uint8_t config_num, - tuh_xfer_cb_t complete_cb, uintptr_t user_data) -{ + tuh_xfer_cb_t complete_cb, uintptr_t user_data) { TU_LOG_USBH("Set Configuration = %d\r\n", config_num); - - tusb_control_request_t const request = - { - .bmRequestType_bit = - { - .recipient = TUSB_REQ_RCPT_DEVICE, - .type = TUSB_REQ_TYPE_STANDARD, - .direction = TUSB_DIR_OUT - }, - .bRequest = TUSB_REQ_SET_CONFIGURATION, - .wValue = tu_htole16(config_num), - .wIndex = 0, - .wLength = 0 + tusb_control_request_t const request = { + .bmRequestType_bit = { + .recipient = TUSB_REQ_RCPT_DEVICE, + .type = TUSB_REQ_TYPE_STANDARD, + .direction = TUSB_DIR_OUT + }, + .bRequest = TUSB_REQ_SET_CONFIGURATION, + .wValue = tu_htole16(config_num), + .wIndex = 0, + .wLength = 0 }; - - tuh_xfer_t xfer = - { - .daddr = daddr, - .ep_addr = 0, - .setup = &request, - .buffer = NULL, - .complete_cb = complete_cb, - .user_data = user_data + tuh_xfer_t xfer = { + .daddr = daddr, + .ep_addr = 0, + .setup = &request, + .buffer = NULL, + .complete_cb = complete_cb, + .user_data = user_data }; return tuh_control_xfer(&xfer); } bool tuh_interface_set(uint8_t daddr, uint8_t itf_num, uint8_t itf_alt, - tuh_xfer_cb_t complete_cb, uintptr_t user_data) -{ + tuh_xfer_cb_t complete_cb, uintptr_t user_data) { TU_LOG_USBH("Set Interface %u Alternate %u\r\n", itf_num, itf_alt); - - tusb_control_request_t const request = - { - .bmRequestType_bit = - { - .recipient = TUSB_REQ_RCPT_DEVICE, - .type = TUSB_REQ_TYPE_STANDARD, - .direction = TUSB_DIR_OUT - }, - .bRequest = TUSB_REQ_SET_INTERFACE, - .wValue = tu_htole16(itf_alt), - .wIndex = tu_htole16(itf_num), - .wLength = 0 + tusb_control_request_t const request = { + .bmRequestType_bit = { + .recipient = TUSB_REQ_RCPT_DEVICE, + .type = TUSB_REQ_TYPE_STANDARD, + .direction = TUSB_DIR_OUT + }, + .bRequest = TUSB_REQ_SET_INTERFACE, + .wValue = tu_htole16(itf_alt), + .wIndex = tu_htole16(itf_num), + .wLength = 0 }; - - tuh_xfer_t xfer = - { - .daddr = daddr, - .ep_addr = 0, - .setup = &request, - .buffer = NULL, - .complete_cb = complete_cb, - .user_data = user_data + tuh_xfer_t xfer = { + .daddr = daddr, + .ep_addr = 0, + .setup = &request, + .buffer = NULL, + .complete_cb = complete_cb, + .user_data = user_data }; return tuh_control_xfer(&xfer); @@ -1132,43 +1143,42 @@ bool tuh_interface_set(uint8_t daddr, uint8_t itf_num, uint8_t itf_alt, TU_VERIFY(_async_func(__VA_ARGS__, NULL, (uintptr_t) &result), XFER_RESULT_TIMEOUT); \ return (uint8_t) result -uint8_t tuh_descriptor_get_sync(uint8_t daddr, uint8_t type, uint8_t index, void* buffer, uint16_t len) -{ +uint8_t tuh_descriptor_get_sync(uint8_t daddr, uint8_t type, uint8_t index, + void* buffer, uint16_t len) { _CONTROL_SYNC_API(tuh_descriptor_get, daddr, type, index, buffer, len); } -uint8_t tuh_descriptor_get_device_sync(uint8_t daddr, void* buffer, uint16_t len) -{ +uint8_t tuh_descriptor_get_device_sync(uint8_t daddr, void* buffer, uint16_t len) { _CONTROL_SYNC_API(tuh_descriptor_get_device, daddr, buffer, len); } -uint8_t tuh_descriptor_get_configuration_sync(uint8_t daddr, uint8_t index, void* buffer, uint16_t len) -{ +uint8_t tuh_descriptor_get_configuration_sync(uint8_t daddr, uint8_t index, + void* buffer, uint16_t len) { _CONTROL_SYNC_API(tuh_descriptor_get_configuration, daddr, index, buffer, len); } -uint8_t tuh_descriptor_get_hid_report_sync(uint8_t daddr, uint8_t itf_num, uint8_t desc_type, uint8_t index, void* buffer, uint16_t len) -{ +uint8_t tuh_descriptor_get_hid_report_sync(uint8_t daddr, uint8_t itf_num, uint8_t desc_type, uint8_t index, + void* buffer, uint16_t len) { _CONTROL_SYNC_API(tuh_descriptor_get_hid_report, daddr, itf_num, desc_type, index, buffer, len); } -uint8_t tuh_descriptor_get_string_sync(uint8_t daddr, uint8_t index, uint16_t language_id, void* buffer, uint16_t len) -{ +uint8_t tuh_descriptor_get_string_sync(uint8_t daddr, uint8_t index, uint16_t language_id, + void* buffer, uint16_t len) { _CONTROL_SYNC_API(tuh_descriptor_get_string, daddr, index, language_id, buffer, len); } -uint8_t tuh_descriptor_get_manufacturer_string_sync(uint8_t daddr, uint16_t language_id, void* buffer, uint16_t len) -{ +uint8_t tuh_descriptor_get_manufacturer_string_sync(uint8_t daddr, uint16_t language_id, + void* buffer, uint16_t len) { _CONTROL_SYNC_API(tuh_descriptor_get_manufacturer_string, daddr, language_id, buffer, len); } -uint8_t tuh_descriptor_get_product_string_sync(uint8_t daddr, uint16_t language_id, void* buffer, uint16_t len) -{ +uint8_t tuh_descriptor_get_product_string_sync(uint8_t daddr, uint16_t language_id, + void* buffer, uint16_t len) { _CONTROL_SYNC_API(tuh_descriptor_get_product_string, daddr, language_id, buffer, len); } -uint8_t tuh_descriptor_get_serial_string_sync(uint8_t daddr, uint16_t language_id, void* buffer, uint16_t len) -{ +uint8_t tuh_descriptor_get_serial_string_sync(uint8_t daddr, uint16_t language_id, + void* buffer, uint16_t len) { _CONTROL_SYNC_API(tuh_descriptor_get_serial_string, daddr, language_id, buffer, len); } @@ -1176,9 +1186,7 @@ uint8_t tuh_descriptor_get_serial_string_sync(uint8_t daddr, uint16_t language_i // Detaching //--------------------------------------------------------------------+ -TU_ATTR_ALWAYS_INLINE -static inline bool is_hub_addr(uint8_t daddr) -{ +TU_ATTR_ALWAYS_INLINE static inline bool is_hub_addr(uint8_t daddr) { return (CFG_TUH_HUB > 0) && (daddr > CFG_TUH_DEVICE_MAX); } @@ -1203,62 +1211,63 @@ static inline bool is_hub_addr(uint8_t daddr) //} // a device unplugged from rhport:hub_addr:hub_port -static void process_removing_device(uint8_t rhport, uint8_t hub_addr, uint8_t hub_port) -{ +static void process_removing_device(uint8_t rhport, uint8_t hub_addr, uint8_t hub_port) { //------------- find the all devices (star-network) under port that is unplugged -------------// // TODO mark as disconnected in ISR, also handle dev0 + uint32_t removing_hubs = 0; + do { + for (uint8_t dev_id = 0; dev_id < TOTAL_DEVICES; dev_id++) { + usbh_device_t* dev = &_usbh_devices[dev_id]; + uint8_t const daddr = dev_id + 1; -#if 0 - // index as hub addr, value is hub port (0xFF for invalid) - uint8_t removing_hubs[CFG_TUH_HUB]; - memset(removing_hubs, TUSB_INDEX_INVALID_8, sizeof(removing_hubs)); - - removing_hubs[hub_addr-CFG_TUH_DEVICE_MAX] = hub_port; + // hub_addr = 0 means roothub, hub_port = 0 means all devices of downstream hub + if (dev->rhport == rhport && dev->connected && + (hub_addr == 0 || dev->hub_addr == hub_addr) && + (hub_port == 0 || dev->hub_port == hub_port)) { + TU_LOG_USBH("[%u:%u:%u] unplugged address = %u\r\n", rhport, hub_addr, hub_port, daddr); - // consecutive non-removing hub - uint8_t nop_count = 0; -#endif + if (is_hub_addr(daddr)) { + TU_LOG_USBH(" is a HUB device %u\r\n", daddr); + removing_hubs |= TU_BIT(dev_id - CFG_TUH_DEVICE_MAX); + } else { + // Invoke callback before closing driver (maybe call it later ?) + if (tuh_umount_cb) tuh_umount_cb(daddr); + } - for (uint8_t dev_id = 0; dev_id < TOTAL_DEVICES; dev_id++) - { - usbh_device_t *dev = &_usbh_devices[dev_id]; - uint8_t const daddr = dev_id + 1; + // Close class driver + for (uint8_t drv_id = 0; drv_id < TOTAL_DRIVER_COUNT; drv_id++) { + usbh_class_driver_t const* driver = get_driver(drv_id); + if (driver) driver->close(daddr); + } - // hub_addr = 0 means roothub, hub_port = 0 means all devices of downstream hub - if (dev->rhport == rhport && dev->connected && - (hub_addr == 0 || dev->hub_addr == hub_addr) && - (hub_port == 0 || dev->hub_port == hub_port)) { - TU_LOG_USBH("Device unplugged address = %u\r\n", daddr); + hcd_device_close(rhport, daddr); + clear_device(dev); - if (is_hub_addr(daddr)) { - TU_LOG_USBH(" is a HUB device %u\r\n", daddr); + // abort on-going control xfer on this device if any + if (_ctrl_xfer.daddr == daddr) _set_control_xfer_stage(CONTROL_STAGE_IDLE); + } + } - // Submit removed event If the device itself is a hub (un-rolled recursive) - // TODO a better to unroll recursrive is using array of removing_hubs and mark it here - hcd_event_t event; - event.rhport = rhport; - event.event_id = HCD_EVENT_DEVICE_REMOVE; - event.connection.hub_addr = daddr; - event.connection.hub_port = 0; + // if removing a hub, we need to remove its downstream devices + #if CFG_TUH_HUB + if (removing_hubs == 0) break; - hcd_event_handler(&event, false); - } else { - // Invoke callback before closing driver (maybe call it later ?) - if (tuh_umount_cb) tuh_umount_cb(daddr); - } + // find a marked hub to process + for (uint8_t h_id = 0; h_id < CFG_TUH_HUB; h_id++) { + if (tu_bit_test(removing_hubs, h_id)) { + removing_hubs &= ~TU_BIT(h_id); - // Close class driver - for (uint8_t drv_id = 0; drv_id < TOTAL_DRIVER_COUNT; drv_id++) { - usbh_class_driver_t const * driver = get_driver(drv_id); - if ( driver ) driver->close(daddr); + // update hub_addr and hub_port for next loop + hub_addr = h_id + 1 + CFG_TUH_DEVICE_MAX; + hub_port = 0; + break; } - - hcd_device_close(rhport, daddr); - clear_device(dev); - // abort on-going control xfer if any - if (_ctrl_xfer.daddr == daddr) _set_control_xfer_stage(CONTROL_STAGE_IDLE); } - } + #else + (void) removing_hubs; + break; + #endif + } while(1); } //--------------------------------------------------------------------+ @@ -1327,227 +1336,221 @@ static void process_enumeration(tuh_xfer_t* xfer) { uint8_t const daddr = xfer->daddr; uintptr_t const state = xfer->user_data; - switch(state) - { -#if CFG_TUH_HUB + switch (state) { + #if CFG_TUH_HUB //case ENUM_HUB_GET_STATUS_1: break; - case ENUM_HUB_CLEAR_RESET_1: - { + case ENUM_HUB_CLEAR_RESET_1: { hub_port_status_response_t port_status; memcpy(&port_status, _usbh_ctrl_buf, sizeof(hub_port_status_response_t)); - if ( !port_status.status.connection ) - { + if (!port_status.status.connection) { // device unplugged while delaying, nothing else to do enum_full_complete(); return; } _dev0.speed = (port_status.status.high_speed) ? TUSB_SPEED_HIGH : - (port_status.status.low_speed ) ? TUSB_SPEED_LOW : TUSB_SPEED_FULL; + (port_status.status.low_speed) ? TUSB_SPEED_LOW : TUSB_SPEED_FULL; // Acknowledge Port Reset Change - if (port_status.change.reset) - { - hub_port_clear_reset_change(_dev0.hub_addr, _dev0.hub_port, process_enumeration, ENUM_ADDR0_DEVICE_DESC); + if (port_status.change.reset) { + hub_port_clear_reset_change(_dev0.hub_addr, _dev0.hub_port, + process_enumeration, ENUM_ADDR0_DEVICE_DESC); } + break; } - break; case ENUM_HUB_GET_STATUS_2: osal_task_delay(ENUM_RESET_DELAY); - TU_ASSERT( hub_port_get_status(_dev0.hub_addr, _dev0.hub_port, _usbh_ctrl_buf, process_enumeration, ENUM_HUB_CLEAR_RESET_2), ); - break; + TU_ASSERT(hub_port_get_status(_dev0.hub_addr, _dev0.hub_port, _usbh_ctrl_buf, + process_enumeration, ENUM_HUB_CLEAR_RESET_2),); + break; - case ENUM_HUB_CLEAR_RESET_2: - { + case ENUM_HUB_CLEAR_RESET_2: { hub_port_status_response_t port_status; memcpy(&port_status, _usbh_ctrl_buf, sizeof(hub_port_status_response_t)); // Acknowledge Port Reset Change if Reset Successful - if (port_status.change.reset) - { - TU_ASSERT( hub_port_clear_reset_change(_dev0.hub_addr, _dev0.hub_port, process_enumeration, ENUM_SET_ADDR), ); + if (port_status.change.reset) { + TU_ASSERT(hub_port_clear_reset_change(_dev0.hub_addr, _dev0.hub_port, + process_enumeration, ENUM_SET_ADDR),); } + break; } - break; -#endif + #endif - case ENUM_ADDR0_DEVICE_DESC: - { + case ENUM_ADDR0_DEVICE_DESC: { // TODO probably doesn't need to open/close each enumeration uint8_t const addr0 = 0; - TU_ASSERT( usbh_edpt_control_open(addr0, 8), ); + TU_ASSERT(usbh_edpt_control_open(addr0, 8),); // Get first 8 bytes of device descriptor for Control Endpoint size TU_LOG_USBH("Get 8 byte of Device Descriptor\r\n"); - TU_ASSERT(tuh_descriptor_get_device(addr0, _usbh_ctrl_buf, 8, process_enumeration, ENUM_SET_ADDR), ); + TU_ASSERT(tuh_descriptor_get_device(addr0, _usbh_ctrl_buf, 8, + process_enumeration, ENUM_SET_ADDR),); + break; } - break; #if 0 - case ENUM_RESET_2: - // TODO not used by now, but may be needed for some devices !? - // Reset device again before Set Address - TU_LOG_USBH("Port reset2 \r\n"); - if (_dev0.hub_addr == 0) - { - // connected directly to roothub - hcd_port_reset( _dev0.rhport ); - osal_task_delay(RESET_DELAY); // TODO may not work for no-OS on MCU that require reset_end() since - // sof of controller may not running while resetting - hcd_port_reset_end(_dev0.rhport); - // TODO: fall through to SET ADDRESS, refactor later - } - #if CFG_TUH_HUB - else - { - // after RESET_DELAY the hub_port_reset() already complete - TU_ASSERT( hub_port_reset(_dev0.hub_addr, _dev0.hub_port, process_enumeration, ENUM_HUB_GET_STATUS_2), ); - break; - } - #endif - TU_ATTR_FALLTHROUGH; + case ENUM_RESET_2: + // TODO not used by now, but may be needed for some devices !? + // Reset device again before Set Address + TU_LOG_USBH("Port reset2 \r\n"); + if (_dev0.hub_addr == 0) { + // connected directly to roothub + hcd_port_reset( _dev0.rhport ); + osal_task_delay(RESET_DELAY); // TODO may not work for no-OS on MCU that require reset_end() since + // sof of controller may not running while resetting + hcd_port_reset_end(_dev0.rhport); + // TODO: fall through to SET ADDRESS, refactor later + } +#if CFG_TUH_HUB + else { + // after RESET_DELAY the hub_port_reset() already complete + TU_ASSERT( hub_port_reset(_dev0.hub_addr, _dev0.hub_port, + process_enumeration, ENUM_HUB_GET_STATUS_2), ); + break; + } +#endif + TU_ATTR_FALLTHROUGH; #endif case ENUM_SET_ADDR: enum_request_set_addr(); - break; + break; - case ENUM_GET_DEVICE_DESC: - { + case ENUM_GET_DEVICE_DESC: { uint8_t const new_addr = (uint8_t) tu_le16toh(xfer->setup->wValue); usbh_device_t* new_dev = get_device(new_addr); - TU_ASSERT(new_dev, ); + TU_ASSERT(new_dev,); new_dev->addressed = 1; // Close device 0 hcd_device_close(_dev0.rhport, 0); // open control pipe for new address - TU_ASSERT( usbh_edpt_control_open(new_addr, new_dev->ep0_size), ); + TU_ASSERT(usbh_edpt_control_open(new_addr, new_dev->ep0_size),); // Get full device descriptor TU_LOG_USBH("Get Device Descriptor\r\n"); - TU_ASSERT(tuh_descriptor_get_device(new_addr, _usbh_ctrl_buf, sizeof(tusb_desc_device_t), process_enumeration, ENUM_GET_9BYTE_CONFIG_DESC), ); + TU_ASSERT(tuh_descriptor_get_device(new_addr, _usbh_ctrl_buf, sizeof(tusb_desc_device_t), + process_enumeration, ENUM_GET_9BYTE_CONFIG_DESC),); + break; } - break; - case ENUM_GET_9BYTE_CONFIG_DESC: - { - tusb_desc_device_t const * desc_device = (tusb_desc_device_t const*) _usbh_ctrl_buf; + case ENUM_GET_9BYTE_CONFIG_DESC: { + tusb_desc_device_t const* desc_device = (tusb_desc_device_t const*) _usbh_ctrl_buf; usbh_device_t* dev = get_device(daddr); - TU_ASSERT(dev, ); + TU_ASSERT(dev,); - dev->vid = desc_device->idVendor; - dev->pid = desc_device->idProduct; + dev->vid = desc_device->idVendor; + dev->pid = desc_device->idProduct; dev->i_manufacturer = desc_device->iManufacturer; - dev->i_product = desc_device->iProduct; - dev->i_serial = desc_device->iSerialNumber; + dev->i_product = desc_device->iProduct; + dev->i_serial = desc_device->iSerialNumber; - // if (tuh_attach_cb) tuh_attach_cb((tusb_desc_device_t*) _usbh_ctrl_buf); + // if (tuh_attach_cb) tuh_attach_cb((tusb_desc_device_t*) _usbh_ctrl_buf); // Get 9-byte for total length uint8_t const config_idx = CONFIG_NUM - 1; TU_LOG_USBH("Get Configuration[0] Descriptor (9 bytes)\r\n"); - TU_ASSERT( tuh_descriptor_get_configuration(daddr, config_idx, _usbh_ctrl_buf, 9, process_enumeration, ENUM_GET_FULL_CONFIG_DESC), ); + TU_ASSERT(tuh_descriptor_get_configuration(daddr, config_idx, _usbh_ctrl_buf, 9, + process_enumeration, ENUM_GET_FULL_CONFIG_DESC),); + break; } - break; - case ENUM_GET_FULL_CONFIG_DESC: - { - uint8_t const * desc_config = _usbh_ctrl_buf; + case ENUM_GET_FULL_CONFIG_DESC: { + uint8_t const* desc_config = _usbh_ctrl_buf; // Use offsetof to avoid pointer to the odd/misaligned address - uint16_t const total_len = tu_le16toh( tu_unaligned_read16(desc_config + offsetof(tusb_desc_configuration_t, wTotalLength)) ); + uint16_t const total_len = tu_le16toh( + tu_unaligned_read16(desc_config + offsetof(tusb_desc_configuration_t, wTotalLength))); // TODO not enough buffer to hold configuration descriptor - TU_ASSERT(total_len <= CFG_TUH_ENUMERATION_BUFSIZE, ); + TU_ASSERT(total_len <= CFG_TUH_ENUMERATION_BUFSIZE,); // Get full configuration descriptor uint8_t const config_idx = CONFIG_NUM - 1; TU_LOG_USBH("Get Configuration[0] Descriptor\r\n"); - TU_ASSERT( tuh_descriptor_get_configuration(daddr, config_idx, _usbh_ctrl_buf, total_len, process_enumeration, ENUM_SET_CONFIG), ); + TU_ASSERT(tuh_descriptor_get_configuration(daddr, config_idx, _usbh_ctrl_buf, total_len, + process_enumeration, ENUM_SET_CONFIG),); + break; } - break; case ENUM_SET_CONFIG: - // Parse configuration & set up drivers - // Driver open aren't allowed to make any usb transfer yet - TU_ASSERT( _parse_configuration_descriptor(daddr, (tusb_desc_configuration_t*) _usbh_ctrl_buf), ); - - TU_ASSERT( tuh_configuration_set(daddr, CONFIG_NUM, process_enumeration, ENUM_CONFIG_DRIVER), ); - break; + TU_ASSERT(tuh_configuration_set(daddr, CONFIG_NUM, process_enumeration, ENUM_CONFIG_DRIVER),); + break; - case ENUM_CONFIG_DRIVER: - { + case ENUM_CONFIG_DRIVER: { TU_LOG_USBH("Device configured\r\n"); usbh_device_t* dev = get_device(daddr); - TU_ASSERT(dev, ); + TU_ASSERT(dev,); dev->configured = 1; + // Parse configuration & set up drivers + // driver_open() must not make any usb transfer + TU_ASSERT(_parse_configuration_descriptor(daddr, (tusb_desc_configuration_t*) _usbh_ctrl_buf),); + // Start the Set Configuration process for interfaces (itf = TUSB_INDEX_INVALID_8) // Since driver can perform control transfer within its set_config, this is done asynchronously. // The process continue with next interface when class driver complete its sequence with usbh_driver_set_config_complete() // TODO use separated API instead of using TUSB_INDEX_INVALID_8 usbh_driver_set_config_complete(daddr, TUSB_INDEX_INVALID_8); + break; } - break; default: // stop enumeration if unknown state enum_full_complete(); - break; + break; } } -static bool enum_new_device(hcd_event_t* event) -{ - _dev0.rhport = event->rhport; +static bool enum_new_device(hcd_event_t* event) { + _dev0.rhport = event->rhport; _dev0.hub_addr = event->connection.hub_addr; _dev0.hub_port = event->connection.hub_port; - if (_dev0.hub_addr == 0) - { + if (_dev0.hub_addr == 0) { // connected/disconnected directly with roothub hcd_port_reset(_dev0.rhport); osal_task_delay(ENUM_RESET_DELAY); // TODO may not work for no-OS on MCU that require reset_end() since - // sof of controller may not running while resetting - hcd_port_reset_end( _dev0.rhport); + // sof of controller may not running while resetting + hcd_port_reset_end(_dev0.rhport); // wait until device connection is stable TODO non blocking osal_task_delay(ENUM_CONTACT_DEBOUNCING_DELAY); // device unplugged while delaying - if ( !hcd_port_connect_status(_dev0.rhport) ) { + if (!hcd_port_connect_status(_dev0.rhport)) { enum_full_complete(); return true; } - _dev0.speed = hcd_port_speed_get(_dev0.rhport ); + _dev0.speed = hcd_port_speed_get(_dev0.rhport); TU_LOG_USBH("%s Speed\r\n", tu_str_speed[_dev0.speed]); // fake transfer to kick-off the enumeration process tuh_xfer_t xfer; - xfer.daddr = 0; - xfer.result = XFER_RESULT_SUCCESS; + xfer.daddr = 0; + xfer.result = XFER_RESULT_SUCCESS; xfer.user_data = ENUM_ADDR0_DEVICE_DESC; process_enumeration(&xfer); } #if CFG_TUH_HUB - else - { + else { // connected/disconnected via external hub // wait until device connection is stable TODO non blocking osal_task_delay(ENUM_CONTACT_DEBOUNCING_DELAY); // ENUM_HUB_GET_STATUS //TU_ASSERT( hub_port_get_status(_dev0.hub_addr, _dev0.hub_port, _usbh_ctrl_buf, enum_hub_get_status0_complete, 0) ); - TU_ASSERT( hub_port_get_status(_dev0.hub_addr, _dev0.hub_port, _usbh_ctrl_buf, process_enumeration, ENUM_HUB_CLEAR_RESET_1) ); + TU_ASSERT(hub_port_get_status(_dev0.hub_addr, _dev0.hub_port, _usbh_ctrl_buf, + process_enumeration, ENUM_HUB_CLEAR_RESET_1)); } #endif // hub @@ -1573,58 +1576,48 @@ static uint8_t get_new_address(bool is_hub) { return 0; // invalid address } -static bool enum_request_set_addr(void) -{ - tusb_desc_device_t const * desc_device = (tusb_desc_device_t const*) _usbh_ctrl_buf; +static bool enum_request_set_addr(void) { + tusb_desc_device_t const* desc_device = (tusb_desc_device_t const*) _usbh_ctrl_buf; // Get new address uint8_t const new_addr = get_new_address(desc_device->bDeviceClass == TUSB_CLASS_HUB); TU_ASSERT(new_addr != 0); - TU_LOG_USBH("Set Address = %d\r\n", new_addr); usbh_device_t* new_dev = get_device(new_addr); - - new_dev->rhport = _dev0.rhport; - new_dev->hub_addr = _dev0.hub_addr; - new_dev->hub_port = _dev0.hub_port; - new_dev->speed = _dev0.speed; + new_dev->rhport = _dev0.rhport; + new_dev->hub_addr = _dev0.hub_addr; + new_dev->hub_port = _dev0.hub_port; + new_dev->speed = _dev0.speed; new_dev->connected = 1; - new_dev->ep0_size = desc_device->bMaxPacketSize0; + new_dev->ep0_size = desc_device->bMaxPacketSize0; - tusb_control_request_t const request = - { - .bmRequestType_bit = - { - .recipient = TUSB_REQ_RCPT_DEVICE, - .type = TUSB_REQ_TYPE_STANDARD, - .direction = TUSB_DIR_OUT - }, - .bRequest = TUSB_REQ_SET_ADDRESS, - .wValue = tu_htole16(new_addr), - .wIndex = 0, - .wLength = 0 + tusb_control_request_t const request = { + .bmRequestType_bit = { + .recipient = TUSB_REQ_RCPT_DEVICE, + .type = TUSB_REQ_TYPE_STANDARD, + .direction = TUSB_DIR_OUT + }, + .bRequest = TUSB_REQ_SET_ADDRESS, + .wValue = tu_htole16(new_addr), + .wIndex = 0, + .wLength = 0 }; - - tuh_xfer_t xfer = - { - .daddr = 0, // dev0 - .ep_addr = 0, - .setup = &request, - .buffer = NULL, - .complete_cb = process_enumeration, - .user_data = ENUM_GET_DEVICE_DESC + tuh_xfer_t xfer = { + .daddr = 0, // dev0 + .ep_addr = 0, + .setup = &request, + .buffer = NULL, + .complete_cb = process_enumeration, + .user_data = ENUM_GET_DEVICE_DESC }; - TU_ASSERT( tuh_control_xfer(&xfer) ); - + TU_ASSERT(tuh_control_xfer(&xfer)); return true; } -static bool _parse_configuration_descriptor(uint8_t dev_addr, tusb_desc_configuration_t const* desc_cfg) -{ +static bool _parse_configuration_descriptor(uint8_t dev_addr, tusb_desc_configuration_t const* desc_cfg) { usbh_device_t* dev = get_device(dev_addr); - uint16_t const total_len = tu_le16toh(desc_cfg->wTotalLength); uint8_t const* desc_end = ((uint8_t const*) desc_cfg) + total_len; uint8_t const* p_desc = tu_desc_next(desc_cfg); @@ -1632,13 +1625,11 @@ static bool _parse_configuration_descriptor(uint8_t dev_addr, tusb_desc_configur TU_LOG_USBH("Parsing Configuration descriptor (wTotalLength = %u)\r\n", total_len); // parse each interfaces - while( p_desc < desc_end ) - { + while( p_desc < desc_end ) { uint8_t assoc_itf_count = 1; // Class will always starts with Interface Association (if any) and then Interface descriptor - if ( TUSB_DESC_INTERFACE_ASSOCIATION == tu_desc_type(p_desc) ) - { + if ( TUSB_DESC_INTERFACE_ASSOCIATION == tu_desc_type(p_desc) ) { tusb_desc_interface_assoc_t const * desc_iad = (tusb_desc_interface_assoc_t const *) p_desc; assoc_itf_count = desc_iad->bInterfaceCount; @@ -1658,8 +1649,7 @@ static bool _parse_configuration_descriptor(uint8_t dev_addr, tusb_desc_configur if (1 == assoc_itf_count && TUSB_CLASS_AUDIO == desc_itf->bInterfaceClass && AUDIO_SUBCLASS_CONTROL == desc_itf->bInterfaceSubClass && - AUDIO_FUNC_PROTOCOL_CODE_UNDEF == desc_itf->bInterfaceProtocol) - { + AUDIO_FUNC_PROTOCOL_CODE_UNDEF == desc_itf->bInterfaceProtocol) { assoc_itf_count = 2; } #endif @@ -1669,8 +1659,7 @@ static bool _parse_configuration_descriptor(uint8_t dev_addr, tusb_desc_configur // manually force associated count = 2 if (1 == assoc_itf_count && TUSB_CLASS_CDC == desc_itf->bInterfaceClass && - CDC_COMM_SUBCLASS_ABSTRACT_CONTROL_MODEL == desc_itf->bInterfaceSubClass) - { + CDC_COMM_SUBCLASS_ABSTRACT_CONTROL_MODEL == desc_itf->bInterfaceSubClass) { assoc_itf_count = 2; } #endif @@ -1679,18 +1668,14 @@ static bool _parse_configuration_descriptor(uint8_t dev_addr, tusb_desc_configur TU_ASSERT(drv_len >= sizeof(tusb_desc_interface_t)); // Find driver for this interface - for (uint8_t drv_id = 0; drv_id < TOTAL_DRIVER_COUNT; drv_id++) - { + for (uint8_t drv_id = 0; drv_id < TOTAL_DRIVER_COUNT; drv_id++) { usbh_class_driver_t const * driver = get_driver(drv_id); - - if (driver && driver->open(dev->rhport, dev_addr, desc_itf, drv_len) ) - { + if (driver && driver->open(dev->rhport, dev_addr, desc_itf, drv_len) ) { // open successfully TU_LOG_USBH(" %s opened\r\n", driver->name); // bind (associated) interfaces to found driver - for(uint8_t i=0; i<assoc_itf_count; i++) - { + for(uint8_t i=0; i<assoc_itf_count; i++) { uint8_t const itf_num = desc_itf->bInterfaceNumber+i; // Interface number must not be used already @@ -1704,8 +1689,7 @@ static bool _parse_configuration_descriptor(uint8_t dev_addr, tusb_desc_configur break; // exit driver find loop } - if ( drv_id == TOTAL_DRIVER_COUNT - 1 ) - { + if ( drv_id == TOTAL_DRIVER_COUNT - 1 ) { TU_LOG_USBH("[%u:%u] Interface %u: class = %u subclass = %u protocol = %u is not supported\r\n", dev->rhport, dev_addr, desc_itf->bInterfaceNumber, desc_itf->bInterfaceClass, desc_itf->bInterfaceSubClass, desc_itf->bInterfaceProtocol); } diff --git a/src/host/usbh.h b/src/host/usbh.h index 9ff118543..57362c778 100644 --- a/src/host/usbh.h +++ b/src/host/usbh.h @@ -73,11 +73,21 @@ typedef struct { tusb_desc_interface_t desc; } tuh_itf_info_t; -// ConfigID for tuh_config() +// ConfigID for tuh_configure() enum { - TUH_CFGID_RPI_PIO_USB_CONFIGURATION = OPT_MCU_RP2040 << 8 // cfg_param: pio_usb_configuration_t + TUH_CFGID_INVALID = 0, + TUH_CFGID_RPI_PIO_USB_CONFIGURATION = 100, // cfg_param: pio_usb_configuration_t + TUH_CFGID_MAX3421 = 200, }; +typedef union { + // For TUH_CFGID_RPI_PIO_USB_CONFIGURATION use pio_usb_configuration_t + + struct { + uint8_t max_nak; + } max3421; +} tuh_configure_param_t; + //--------------------------------------------------------------------+ // APPLICATION CALLBACK //--------------------------------------------------------------------+ @@ -109,7 +119,11 @@ bool tuh_configure(uint8_t rhport, uint32_t cfg_id, const void* cfg_param); // Init host stack bool tuh_init(uint8_t rhport); +// Deinit host stack on rhport +bool tuh_deinit(uint8_t rhport); + // Check if host stack is already initialized with any roothub ports +// To check if an rhport is initialized, use tuh_rhport_is_active() bool tuh_inited(void); // Task function should be called in main/rtos loop, extended version of tuh_task() diff --git a/src/host/usbh_pvt.h b/src/host/usbh_pvt.h index 4a97a1c18..46d13a907 100644 --- a/src/host/usbh_pvt.h +++ b/src/host/usbh_pvt.h @@ -46,11 +46,9 @@ enum { //--------------------------------------------------------------------+ typedef struct { - #if CFG_TUSB_DEBUG >= CFG_TUH_LOG_LEVEL char const* name; - #endif - - void (* const init )(void); + bool (* const init )(void); + bool (* const deinit )(void); bool (* const open )(uint8_t rhport, uint8_t dev_addr, tusb_desc_interface_t const * itf_desc, uint16_t max_len); bool (* const set_config )(uint8_t dev_addr, uint8_t itf_num); bool (* const xfer_cb )(uint8_t dev_addr, uint8_t ep_addr, xfer_result_t result, uint32_t xferred_bytes); |