diff options
Diffstat (limited to 'src/host')
| -rw-r--r-- | src/host/hcd.h | 22 | ||||
| -rw-r--r-- | src/host/hub.c | 9 | ||||
| -rw-r--r-- | src/host/usbh.c | 307 | ||||
| -rw-r--r-- | src/host/usbh.h | 16 | ||||
| -rw-r--r-- | src/host/usbh_pvt.h | 17 |
5 files changed, 181 insertions, 190 deletions
diff --git a/src/host/hcd.h b/src/host/hcd.h index 9bcc1c6df..2bde289df 100644 --- a/src/host/hcd.h +++ b/src/host/hcd.h @@ -39,7 +39,7 @@ // Configuration //--------------------------------------------------------------------+ -// Max number of endpoints per device +// Max number of endpoints pair per device // TODO optimize memory usage #ifndef CFG_TUH_ENDPOINT_MAX #define CFG_TUH_ENDPOINT_MAX 16 @@ -131,7 +131,7 @@ bool hcd_configure(uint8_t rhport, uint32_t cfg_id, const void* cfg_param) TU_AT bool hcd_init(uint8_t rhport); // Interrupt Handler -void hcd_int_handler(uint8_t rhport); +void hcd_int_handler(uint8_t rhport, bool in_isr); // Enable USB interrupt void hcd_int_enable (uint8_t rhport); @@ -167,17 +167,17 @@ void hcd_device_close(uint8_t rhport, uint8_t dev_addr); //--------------------------------------------------------------------+ // Open an endpoint -bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const * ep_desc); +bool hcd_edpt_open(uint8_t rhport, uint8_t daddr, tusb_desc_endpoint_t const * ep_desc); // Submit a transfer, when complete hcd_event_xfer_complete() must be invoked -bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t * buffer, uint16_t buflen); +bool hcd_edpt_xfer(uint8_t rhport, uint8_t daddr, uint8_t ep_addr, uint8_t * buffer, uint16_t buflen); // Abort a queued transfer. Note: it can only abort transfer that has not been started // Return true if a queued transfer is aborted, false if there is no transfer to abort bool hcd_edpt_abort_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr); // Submit a special transfer to send 8-byte Setup Packet, when complete hcd_event_xfer_complete() must be invoked -bool hcd_setup_send(uint8_t rhport, uint8_t dev_addr, uint8_t const setup_packet[8]); +bool hcd_setup_send(uint8_t rhport, uint8_t daddr, uint8_t const setup_packet[8]); // clear stall, data toggle is also reset to DATA0 bool hcd_edpt_clear_stall(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr); @@ -198,8 +198,7 @@ extern void hcd_event_handler(hcd_event_t const* event, bool in_isr); // Helper to send device attach event TU_ATTR_ALWAYS_INLINE static inline -void hcd_event_device_attach(uint8_t rhport, bool in_isr) -{ +void hcd_event_device_attach(uint8_t rhport, bool in_isr) { hcd_event_t event; event.rhport = rhport; event.event_id = HCD_EVENT_DEVICE_ATTACH; @@ -211,8 +210,7 @@ void hcd_event_device_attach(uint8_t rhport, bool in_isr) // Helper to send device removal event TU_ATTR_ALWAYS_INLINE static inline -void hcd_event_device_remove(uint8_t rhport, bool in_isr) -{ +void hcd_event_device_remove(uint8_t rhport, bool in_isr) { hcd_event_t event; event.rhport = rhport; event.event_id = HCD_EVENT_DEVICE_REMOVE; @@ -224,10 +222,8 @@ void hcd_event_device_remove(uint8_t rhport, bool in_isr) // Helper to send USB transfer event TU_ATTR_ALWAYS_INLINE static inline -void hcd_event_xfer_complete(uint8_t dev_addr, uint8_t ep_addr, uint32_t xferred_bytes, xfer_result_t result, bool in_isr) -{ - hcd_event_t event = - { +void hcd_event_xfer_complete(uint8_t dev_addr, uint8_t ep_addr, uint32_t xferred_bytes, xfer_result_t result, bool in_isr) { + hcd_event_t event = { .rhport = 0, // TODO correct rhport .event_id = HCD_EVENT_XFER_COMPLETE, .dev_addr = dev_addr, diff --git a/src/host/hub.c b/src/host/hub.c index 32f5e0ac7..3bac18698 100644 --- a/src/host/hub.c +++ b/src/host/hub.c @@ -435,9 +435,12 @@ static void hub_port_get_status_complete (tuh_xfer_t* xfer) // Other changes are: L1 state // TODO clear change - // prepare for next hub status - // TODO continue with status_change, or maybe we can do it again with status - hub_edpt_status_xfer(daddr); + else + { + // prepare for next hub status + // TODO continue with status_change, or maybe we can do it again with status + hub_edpt_status_xfer(daddr); + } } } diff --git a/src/host/usbh.c b/src/host/usbh.c index 5423df669..dfe6ddb42 100644 --- a/src/host/usbh.c +++ b/src/host/usbh.c @@ -36,7 +36,6 @@ //--------------------------------------------------------------------+ // USBH Configuration //--------------------------------------------------------------------+ - #ifndef CFG_TUH_TASK_QUEUE_SZ #define CFG_TUH_TASK_QUEUE_SZ 16 #endif @@ -46,25 +45,28 @@ #endif //--------------------------------------------------------------------+ -// USBH-HCD common data structure +// Callback weak stubs (called if application does not provide) //--------------------------------------------------------------------+ +TU_ATTR_WEAK void tuh_event_hook_cb(uint8_t rhport, uint32_t eventid, bool in_isr) { + (void) rhport; + (void) eventid; + (void) in_isr; +} -typedef struct -{ +//--------------------------------------------------------------------+ +// USBH-HCD common data structure +//--------------------------------------------------------------------+ +typedef struct { // port uint8_t rhport; uint8_t hub_addr; uint8_t hub_port; - uint8_t speed; - // enumeration is in progress, done when all interfaces are configured - volatile uint8_t enumerating; - -// struct TU_ATTR_PACKED { -// uint8_t speed : 4; // packed speed to save footprint -// volatile uint8_t enumerating : 1; -// uint8_t TU_RESERVED : 3; -// }; + struct TU_ATTR_PACKED { + uint8_t speed : 4; // packed speed to save footprint + volatile uint8_t enumerating : 1; // enumeration is in progress, false if not connected or all interfaces are configured + uint8_t TU_RESERVED : 3; + }; } usbh_dev0_t; typedef struct { @@ -116,60 +118,58 @@ typedef struct { //--------------------------------------------------------------------+ // MACRO CONSTANT TYPEDEF //--------------------------------------------------------------------+ - -#if CFG_TUSB_DEBUG >= 2 +#if CFG_TUSB_DEBUG >= CFG_TUH_LOG_LEVEL #define DRIVER_NAME(_name) .name = _name, #else #define DRIVER_NAME(_name) #endif -static usbh_class_driver_t const usbh_class_drivers[] = -{ - #if CFG_TUH_CDC +static usbh_class_driver_t const usbh_class_drivers[] = { + #if CFG_TUH_CDC { - DRIVER_NAME("CDC") - .init = cdch_init, - .open = cdch_open, - .set_config = cdch_set_config, - .xfer_cb = cdch_xfer_cb, - .close = cdch_close + DRIVER_NAME("CDC") + .init = cdch_init, + .open = cdch_open, + .set_config = cdch_set_config, + .xfer_cb = cdch_xfer_cb, + .close = cdch_close }, - #endif + #endif - #if CFG_TUH_MSC + #if CFG_TUH_MSC { - DRIVER_NAME("MSC") - .init = msch_init, - .open = msch_open, - .set_config = msch_set_config, - .xfer_cb = msch_xfer_cb, - .close = msch_close + DRIVER_NAME("MSC") + .init = msch_init, + .open = msch_open, + .set_config = msch_set_config, + .xfer_cb = msch_xfer_cb, + .close = msch_close }, - #endif + #endif - #if CFG_TUH_HID + #if CFG_TUH_HID { - DRIVER_NAME("HID") - .init = hidh_init, - .open = hidh_open, - .set_config = hidh_set_config, - .xfer_cb = hidh_xfer_cb, - .close = hidh_close + DRIVER_NAME("HID") + .init = hidh_init, + .open = hidh_open, + .set_config = hidh_set_config, + .xfer_cb = hidh_xfer_cb, + .close = hidh_close }, - #endif + #endif - #if CFG_TUH_HUB + #if CFG_TUH_HUB { - DRIVER_NAME("HUB") - .init = hub_init, - .open = hub_open, - .set_config = hub_set_config, - .xfer_cb = hub_xfer_cb, - .close = hub_close + DRIVER_NAME("HUB") + .init = hub_init, + .open = hub_open, + .set_config = hub_set_config, + .xfer_cb = hub_xfer_cb, + .close = hub_close }, - #endif + #endif - #if CFG_TUH_VENDOR + #if CFG_TUH_VENDOR { DRIVER_NAME("VENDOR") .init = cush_init, @@ -177,7 +177,7 @@ static usbh_class_driver_t const usbh_class_drivers[] = .xfer_cb = cush_isr, .close = cush_close } - #endif + #endif }; enum { BUILTIN_DRIVER_COUNT = TU_ARRAY_SIZE(usbh_class_drivers) }; @@ -237,8 +237,7 @@ static uint8_t _usbh_ctrl_buf[CFG_TUH_ENUMERATION_BUFSIZE]; // Control transfers: since most controllers do not support multiple control transfers // on multiple devices concurrently and control transfers are not used much except for // enumeration, we will only execute control transfers one at a time. -CFG_TUH_MEM_SECTION struct -{ +CFG_TUH_MEM_SECTION struct { CFG_TUH_MEM_ALIGN tusb_control_request_t request; uint8_t* buffer; tuh_xfer_cb_t complete_cb; @@ -251,9 +250,7 @@ CFG_TUH_MEM_SECTION struct //------------- Helper Function -------------// -TU_ATTR_ALWAYS_INLINE -static inline usbh_device_t* get_device(uint8_t dev_addr) -{ +TU_ATTR_ALWAYS_INLINE static inline usbh_device_t* get_device(uint8_t dev_addr) { TU_VERIFY(dev_addr > 0 && dev_addr <= TOTAL_DEVICES, NULL); return &_usbh_devices[dev_addr-1]; } @@ -272,6 +269,12 @@ TU_ATTR_WEAK void osal_task_delay(uint32_t msec) { } #endif +TU_ATTR_ALWAYS_INLINE static inline bool queue_event(hcd_event_t const * event, bool in_isr) { + bool ret = osal_queue_send(_usbh_q, event, in_isr); + tuh_event_hook_cb(event->rhport, event->event_id, in_isr); + return ret; +} + //--------------------------------------------------------------------+ // Device API //--------------------------------------------------------------------+ @@ -367,17 +370,14 @@ bool tuh_init(uint8_t controller_id) { tu_memclr(_usbh_devices, sizeof(_usbh_devices)); tu_memclr(&_ctrl_xfer, sizeof(_ctrl_xfer)); - for(uint8_t i=0; i<TOTAL_DEVICES; i++) - { + for(uint8_t i=0; i<TOTAL_DEVICES; i++) { clear_device(&_usbh_devices[i]); } // Class drivers - for (uint8_t drv_id = 0; drv_id < TOTAL_DRIVER_COUNT; drv_id++) - { - usbh_class_driver_t const * driver = get_driver(drv_id); - if ( driver ) - { + for (uint8_t drv_id = 0; drv_id < TOTAL_DRIVER_COUNT; drv_id++) { + usbh_class_driver_t const* driver = get_driver(drv_id); + if (driver) { TU_LOG_USBH("%s init\r\n", driver->name); driver->init(); } @@ -431,13 +431,13 @@ void tuh_task_ext(uint32_t timeout_ms, bool in_isr) { switch (event.event_id) { case HCD_EVENT_DEVICE_ATTACH: - // due to the shared _usbh_ctrl_buf, we must complete enumerating - // one device before enumerating another one. + // due to the shared _usbh_ctrl_buf, we must complete enumerating one device before enumerating another one. + // TODO better to have an separated queue for newly attached devices if ( _dev0.enumerating ) { TU_LOG_USBH("[%u:] USBH Defer Attach until current enumeration complete\r\n", event.rhport); bool is_empty = osal_queue_empty(_usbh_q); - osal_queue_send(_usbh_q, &event, in_isr); + queue_event(&event, in_isr); if (is_empty) { // Exit if this is the only event in the queue, otherwise we may loop forever @@ -456,7 +456,7 @@ void tuh_task_ext(uint32_t timeout_ms, bool in_isr) { #if CFG_TUH_HUB // TODO remove - if ( event.connection.hub_addr != 0) { + if ( event.connection.hub_addr != 0 && event.connection.hub_port != 0) { // done with hub, waiting for next data on status pipe (void) hub_edpt_status_xfer( event.connection.hub_addr ); } @@ -545,28 +545,31 @@ void tuh_task_ext(uint32_t timeout_ms, bool in_isr) { // Control transfer //--------------------------------------------------------------------+ -static void _control_blocking_complete_cb(tuh_xfer_t* xfer) -{ +static void _control_blocking_complete_cb(tuh_xfer_t* xfer) { // update result *((xfer_result_t*) xfer->user_data) = xfer->result; } // TODO timeout_ms is not supported yet -bool tuh_control_xfer (tuh_xfer_t* xfer) -{ +bool tuh_control_xfer (tuh_xfer_t* xfer) { // EP0 with setup packet TU_VERIFY(xfer->ep_addr == 0 && xfer->setup); - // pre-check to help reducing mutex lock - TU_VERIFY(_ctrl_xfer.stage == CONTROL_STAGE_IDLE); - + // Check if device is still connected (enumerating for dev0) uint8_t const daddr = xfer->daddr; + if ( daddr == 0 ) { + if (!_dev0.enumerating) return false; + } else { + usbh_device_t const* dev = get_device(daddr); + if (dev && dev->connected == 0) return false; + } + // pre-check to help reducing mutex lock + TU_VERIFY(_ctrl_xfer.stage == CONTROL_STAGE_IDLE); (void) osal_mutex_lock(_usbh_mutex, OSAL_TIMEOUT_WAIT_FOREVER); bool const is_idle = (_ctrl_xfer.stage == CONTROL_STAGE_IDLE); - if (is_idle) - { + if (is_idle) { _ctrl_xfer.stage = CONTROL_STAGE_SETUP; _ctrl_xfer.daddr = daddr; _ctrl_xfer.actual_len = 0; @@ -585,14 +588,12 @@ bool tuh_control_xfer (tuh_xfer_t* xfer) TU_LOG_USBH("[%u:%u] %s: ", rhport, daddr, (xfer->setup->bmRequestType_bit.type == TUSB_REQ_TYPE_STANDARD && xfer->setup->bRequest <= TUSB_REQ_SYNCH_FRAME) ? tu_str_std_request[xfer->setup->bRequest] : "Class Request"); - TU_LOG_PTR(CFG_TUH_LOG_LEVEL, xfer->setup); + TU_LOG_BUF(CFG_TUH_LOG_LEVEL, xfer->setup, 8); TU_LOG_USBH("\r\n"); - if (xfer->complete_cb) - { + if (xfer->complete_cb) { TU_ASSERT( hcd_setup_send(rhport, daddr, (uint8_t const*) &_ctrl_xfer.request) ); - }else - { + }else { // blocking if complete callback is not provided // change callback to internal blocking, and result as user argument volatile xfer_result_t result = XFER_RESULT_INVALID; @@ -623,21 +624,18 @@ bool tuh_control_xfer (tuh_xfer_t* xfer) return true; } -TU_ATTR_ALWAYS_INLINE static inline void _set_control_xfer_stage(uint8_t stage) -{ +TU_ATTR_ALWAYS_INLINE static inline void _set_control_xfer_stage(uint8_t stage) { (void) osal_mutex_lock(_usbh_mutex, OSAL_TIMEOUT_WAIT_FOREVER); _ctrl_xfer.stage = stage; (void) osal_mutex_unlock(_usbh_mutex); } -static void _xfer_complete(uint8_t daddr, xfer_result_t result) -{ +static void _xfer_complete(uint8_t daddr, xfer_result_t result) { TU_LOG_USBH("\r\n"); // duplicate xfer since user can execute control transfer within callback tusb_control_request_t const request = _ctrl_xfer.request; - tuh_xfer_t xfer_temp = - { + tuh_xfer_t xfer_temp = { .daddr = daddr, .ep_addr = 0, .result = result, @@ -650,36 +648,28 @@ static void _xfer_complete(uint8_t daddr, xfer_result_t result) _set_control_xfer_stage(CONTROL_STAGE_IDLE); - if (xfer_temp.complete_cb) - { + if (xfer_temp.complete_cb) { xfer_temp.complete_cb(&xfer_temp); } } -static bool usbh_control_xfer_cb (uint8_t dev_addr, uint8_t ep_addr, xfer_result_t result, uint32_t xferred_bytes) -{ +static bool usbh_control_xfer_cb (uint8_t dev_addr, uint8_t ep_addr, xfer_result_t result, uint32_t xferred_bytes) { (void) ep_addr; const uint8_t rhport = usbh_get_rhport(dev_addr); tusb_control_request_t const * request = &_ctrl_xfer.request; - if (XFER_RESULT_SUCCESS != result) - { + if (XFER_RESULT_SUCCESS != result) { TU_LOG1("[%u:%u] Control %s, xferred_bytes = %lu\r\n", rhport, dev_addr, result == XFER_RESULT_STALLED ? "STALLED" : "FAILED", xferred_bytes); - #if CFG_TUSB_DEBUG == 1 - TU_LOG1_PTR(request); + TU_LOG1_BUF(request, 8); TU_LOG1("\r\n"); - #endif // terminate transfer if any stage failed _xfer_complete(dev_addr, result); - }else - { - switch(_ctrl_xfer.stage) - { + }else { + switch(_ctrl_xfer.stage) { case CONTROL_STAGE_SETUP: - if (request->wLength) - { + if (request->wLength) { // DATA stage: initial data toggle is always 1 _set_control_xfer_stage(CONTROL_STAGE_DATA); TU_ASSERT( hcd_edpt_xfer(rhport, dev_addr, tu_edpt_addr(0, request->bmRequestType_bit.direction), _ctrl_xfer.buffer, request->wLength) ); @@ -688,8 +678,7 @@ static bool usbh_control_xfer_cb (uint8_t dev_addr, uint8_t ep_addr, xfer_result TU_ATTR_FALLTHROUGH; case CONTROL_STAGE_DATA: - if (request->wLength) - { + if (request->wLength) { TU_LOG_USBH("[%u:%u] Control data:\r\n", rhport, dev_addr); TU_LOG_MEM(CFG_TUH_LOG_LEVEL, _ctrl_xfer.buffer, xferred_bytes, 2); } @@ -716,17 +705,16 @@ static bool usbh_control_xfer_cb (uint8_t dev_addr, uint8_t ep_addr, xfer_result // //--------------------------------------------------------------------+ -bool tuh_edpt_xfer(tuh_xfer_t* xfer) -{ - uint8_t const daddr = xfer->daddr; +bool tuh_edpt_xfer(tuh_xfer_t* xfer) { + uint8_t const daddr = xfer->daddr; uint8_t const ep_addr = xfer->ep_addr; TU_VERIFY(daddr && ep_addr); TU_VERIFY(usbh_edpt_claim(daddr, ep_addr)); - if ( !usbh_edpt_xfer_with_callback(daddr, ep_addr, xfer->buffer, (uint16_t) xfer->buflen, xfer->complete_cb, xfer->user_data) ) - { + if (!usbh_edpt_xfer_with_callback(daddr, ep_addr, xfer->buffer, (uint16_t) xfer->buflen, + xfer->complete_cb, xfer->user_data)) { usbh_edpt_release(daddr, ep_addr); return false; } @@ -765,29 +753,33 @@ bool tuh_edpt_abort_xfer(uint8_t daddr, uint8_t ep_addr) { // USBH API For Class Driver //--------------------------------------------------------------------+ -uint8_t usbh_get_rhport(uint8_t dev_addr) -{ - usbh_device_t* dev = get_device(dev_addr); +uint8_t usbh_get_rhport(uint8_t dev_addr) { + usbh_device_t *dev = get_device(dev_addr); return dev ? dev->rhport : _dev0.rhport; } -uint8_t* usbh_get_enum_buf(void) -{ +uint8_t *usbh_get_enum_buf(void) { return _usbh_ctrl_buf; } -void usbh_int_set(bool enabled) -{ +void usbh_int_set(bool enabled) { // TODO all host controller if multiple are used since they shared the same event queue - if (enabled) - { + if (enabled) { hcd_int_enable(_usbh_controller); - }else - { + } else { hcd_int_disable(_usbh_controller); } } +void usbh_defer_func(osal_task_func_t func, void *param, bool in_isr) { + hcd_event_t event = { 0 }; + event.event_id = USBH_EVENT_FUNC_CALL; + event.func_call.func = func; + event.func_call.param = param; + + queue_event(&event, in_isr); +} + //--------------------------------------------------------------------+ // Endpoint API //--------------------------------------------------------------------+ @@ -825,6 +817,7 @@ bool usbh_edpt_release(uint8_t dev_addr, uint8_t ep_addr) } // Submit an transfer +// TODO call usbh_edpt_release if failed bool usbh_edpt_xfer_with_callback(uint8_t dev_addr, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes, tuh_xfer_cb_t complete_cb, uintptr_t user_data) { @@ -862,7 +855,7 @@ bool usbh_edpt_xfer_with_callback(uint8_t dev_addr, uint8_t ep_addr, uint8_t * b ep_state->busy = 0; ep_state->claimed = 0; TU_LOG1("Failed\r\n"); - TU_BREAKPOINT(); +// TU_BREAKPOINT(); return false; } } @@ -924,18 +917,23 @@ void hcd_devtree_get_info(uint8_t dev_addr, hcd_devtree_info_t* devtree_info) } } -TU_ATTR_FAST_FUNC void hcd_event_handler(hcd_event_t const* event, bool in_isr) -{ - switch (event->event_id) - { -// case HCD_EVENT_DEVICE_REMOVE: -// // mark device as removing to prevent further xfer before the event is processed in usbh task -// break; +TU_ATTR_FAST_FUNC void hcd_event_handler(hcd_event_t const* event, bool in_isr) { + switch (event->event_id) { + case HCD_EVENT_DEVICE_REMOVE: + // FIXME device remove from a hub need an HCD API for hcd to free up endpoint + // mark device as removing to prevent further xfer before the event is processed in usbh task - default: - osal_queue_send(_usbh_q, event, in_isr); - break; + // Check if dev0 is removed + if ((event->rhport == _dev0.rhport) && (event->connection.hub_addr == _dev0.hub_addr) && + (event->connection.hub_port == _dev0.hub_port)) { + _dev0.enumerating = 0; + } + break; + + default: break; } + + queue_event(event, in_isr); } //--------------------------------------------------------------------+ @@ -1233,7 +1231,7 @@ static void process_removing_device(uint8_t rhport, uint8_t hub_addr, uint8_t hu TU_LOG_USBH("Device unplugged address = %u\r\n", daddr); if (is_hub_addr(daddr)) { - TU_LOG(CFG_TUH_LOG_LEVEL, " is a HUB device %u\r\n", daddr); + TU_LOG_USBH(" is a HUB device %u\r\n", daddr); // Submit removed event If the device itself is a hub (un-rolled recursive) // TODO a better to unroll recursrive is using array of removing_hubs and mark it here @@ -1300,8 +1298,7 @@ static bool _parse_configuration_descriptor (uint8_t dev_addr, tusb_desc_configu static void enum_full_complete(void); // process device enumeration -static void process_enumeration(tuh_xfer_t* xfer) -{ +static void process_enumeration(tuh_xfer_t* xfer) { // Retry a few times with transfers in enumeration since device can be unstable when starting up enum { ATTEMPT_COUNT_MAX = 3, @@ -1309,19 +1306,20 @@ static void process_enumeration(tuh_xfer_t* xfer) }; static uint8_t failed_count = 0; - if (XFER_RESULT_SUCCESS != xfer->result) - { + if (XFER_RESULT_SUCCESS != xfer->result) { // retry if not reaching max attempt - if ( failed_count < ATTEMPT_COUNT_MAX ) - { + bool retry = _dev0.enumerating && (failed_count < ATTEMPT_COUNT_MAX); + if ( retry ) { failed_count++; osal_task_delay(ATTEMPT_DELAY_MS); // delay a bit TU_LOG1("Enumeration attempt %u\r\n", failed_count); - TU_ASSERT(tuh_control_xfer(xfer), ); - }else - { + retry = tuh_control_xfer(xfer); + } + + if (!retry) { enum_full_complete(); } + return; } failed_count = 0; @@ -1538,9 +1536,7 @@ static bool enum_new_device(hcd_event_t* event) xfer.result = XFER_RESULT_SUCCESS; xfer.user_data = ENUM_ADDR0_DEVICE_DESC; - process_enumeration(&xfer); - } #if CFG_TUH_HUB else @@ -1710,7 +1706,7 @@ static bool _parse_configuration_descriptor(uint8_t dev_addr, tusb_desc_configur if ( drv_id == TOTAL_DRIVER_COUNT - 1 ) { - TU_LOG(CFG_TUH_LOG_LEVEL, "[%u:%u] Interface %u: class = %u subclass = %u protocol = %u is not supported\r\n", + TU_LOG_USBH("[%u:%u] Interface %u: class = %u subclass = %u protocol = %u is not supported\r\n", dev->rhport, dev_addr, desc_itf->bInterfaceNumber, desc_itf->bInterfaceClass, desc_itf->bInterfaceSubClass, desc_itf->bInterfaceProtocol); } } @@ -1722,19 +1718,16 @@ static bool _parse_configuration_descriptor(uint8_t dev_addr, tusb_desc_configur return true; } -void usbh_driver_set_config_complete(uint8_t dev_addr, uint8_t itf_num) -{ +void usbh_driver_set_config_complete(uint8_t dev_addr, uint8_t itf_num) { usbh_device_t* dev = get_device(dev_addr); - for(itf_num++; itf_num < CFG_TUH_INTERFACE_MAX; itf_num++) - { + for(itf_num++; itf_num < CFG_TUH_INTERFACE_MAX; itf_num++) { // continue with next valid interface // IAD binding interface such as CDCs should return itf_num + 1 when complete // with usbh_driver_set_config_complete() uint8_t const drv_id = dev->itf2drv[itf_num]; usbh_class_driver_t const * driver = get_driver(drv_id); - if (driver) - { + if (driver) { TU_LOG_USBH("%s set config: itf = %u\r\n", driver->name, itf_num); driver->set_config(dev_addr, itf_num); break; @@ -1742,23 +1735,19 @@ void usbh_driver_set_config_complete(uint8_t dev_addr, uint8_t itf_num) } // all interface are configured - if (itf_num == CFG_TUH_INTERFACE_MAX) - { + if (itf_num == CFG_TUH_INTERFACE_MAX) { enum_full_complete(); - if (is_hub_addr(dev_addr)) - { - TU_LOG(CFG_TUH_LOG_LEVEL, "HUB address = %u is mounted\r\n", dev_addr); - }else - { + if (is_hub_addr(dev_addr)) { + TU_LOG_USBH("HUB address = %u is mounted\r\n", dev_addr); + }else { // Invoke callback if available if (tuh_mount_cb) tuh_mount_cb(dev_addr); } } } -static void enum_full_complete(void) -{ +static void enum_full_complete(void) { // mark enumeration as complete _dev0.enumerating = 0; diff --git a/src/host/usbh.h b/src/host/usbh.h index 684e8240e..9ff118543 100644 --- a/src/host/usbh.h +++ b/src/host/usbh.h @@ -90,9 +90,12 @@ TU_ATTR_WEAK void tuh_mount_cb (uint8_t daddr); // Invoked when a device failed to mount during enumeration process // TU_ATTR_WEAK void tuh_mount_failed_cb (uint8_t daddr); -/// Invoked when a device is unmounted (detached) +// Invoked when a device is unmounted (detached) TU_ATTR_WEAK void tuh_umount_cb(uint8_t daddr); +// Invoked when there is a new usb event, which need to be processed by tuh_task()/tuh_task_ext() +void tuh_event_hook_cb(uint8_t rhport, uint32_t eventid, bool in_isr); + //--------------------------------------------------------------------+ // APPLICATION API //--------------------------------------------------------------------+ @@ -124,11 +127,16 @@ void tuh_task(void) { bool tuh_task_event_ready(void); #ifndef _TUSB_HCD_H_ -extern void hcd_int_handler(uint8_t rhport); +extern void hcd_int_handler(uint8_t rhport, bool in_isr); #endif -// Interrupt handler, name alias to HCD -#define tuh_int_handler hcd_int_handler +// Interrupt handler alias to HCD with in_isr as optional parameter +// - tuh_int_handler(rhport) --> hcd_int_handler(rhport, true) +// - tuh_int_handler(rhport, in_isr) --> hcd_int_handler(rhport, in_isr) +// Note: this is similar to TU_VERIFY(), _GET_3RD_ARG() is defined in tusb_verify.h +#define _tuh_int_handler_1arg(_rhport) hcd_int_handler(_rhport, true) +#define _tuh_int_hanlder_2arg(_rhport, _in_isr) hcd_int_handler(_rhport, _in_isr) +#define tuh_int_handler(...) _GET_3RD_ARG(__VA_ARGS__, _tuh_int_hanlder_2arg, _tuh_int_handler_1arg, _dummy)(__VA_ARGS__) // Check if roothub port is initialized and active as a host bool tuh_rhport_is_active(uint8_t rhport); diff --git a/src/host/usbh_pvt.h b/src/host/usbh_pvt.h index 0b58a91bc..4a97a1c18 100644 --- a/src/host/usbh_pvt.h +++ b/src/host/usbh_pvt.h @@ -24,8 +24,8 @@ * This file is part of the TinyUSB stack. */ -#ifndef _TUSB_USBH_CLASSDRIVER_H_ -#define _TUSB_USBH_CLASSDRIVER_H_ +#ifndef _TUSB_USBH_PVT_H_ +#define _TUSB_USBH_PVT_H_ #include "osal/osal.h" #include "common/tusb_fifo.h" @@ -35,11 +35,6 @@ extern "C" { #endif -// Level where CFG_TUSB_DEBUG must be at least for USBH is logged -#ifndef CFG_TUH_LOG_LEVEL - #define CFG_TUH_LOG_LEVEL 2 -#endif - #define TU_LOG_USBH(...) TU_LOG(CFG_TUH_LOG_LEVEL, __VA_ARGS__) enum { @@ -51,7 +46,7 @@ enum { //--------------------------------------------------------------------+ typedef struct { - #if CFG_TUSB_DEBUG >= 2 + #if CFG_TUSB_DEBUG >= CFG_TUH_LOG_LEVEL char const* name; #endif @@ -76,6 +71,8 @@ uint8_t* usbh_get_enum_buf(void); void usbh_int_set(bool enabled); +void usbh_defer_func(osal_task_func_t func, void *param, bool in_isr); + //--------------------------------------------------------------------+ // USBH Endpoint API //--------------------------------------------------------------------+ @@ -85,12 +82,10 @@ bool usbh_edpt_xfer_with_callback(uint8_t dev_addr, uint8_t ep_addr, uint8_t * b tuh_xfer_cb_t complete_cb, uintptr_t user_data); TU_ATTR_ALWAYS_INLINE -static inline bool usbh_edpt_xfer(uint8_t dev_addr, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes) -{ +static inline bool usbh_edpt_xfer(uint8_t dev_addr, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes) { return usbh_edpt_xfer_with_callback(dev_addr, ep_addr, buffer, total_bytes, NULL, 0); } - // Claim an endpoint before submitting a transfer. // If caller does not make any transfer, it must release endpoint for others. bool usbh_edpt_claim(uint8_t dev_addr, uint8_t ep_addr); |