2 files changed, 167 insertions, 2 deletions
diff --git a/src/portable/template/dcd_template.c b/src/portable/template/dcd_template.c
index 26b5dce9d..12d610bd6 100644
--- a/src/portable/template/dcd_template.c
+++ b/src/portable/template/dcd_template.c
@@ -1,4 +1,4 @@
-/* 
+/*
  * The MIT License (MIT)
  *
  * Copyright (c) 2018, hathach (tinyusb.org)
@@ -26,7 +26,7 @@
 
 #include "tusb_option.h"
 
-#if CFG_TUSB_MCU == OPT_MCU_NONE
+#if CFG_TUD_ENABLED && CFG_TUSB_MCU == OPT_MCU_NONE
 
 #include "device/dcd.h"
 
@@ -141,4 +141,6 @@ void dcd_edpt_clear_stall (uint8_t rhport, uint8_t ep_addr)
   (void) ep_addr;
 }
 
+
+
 #endif
diff --git a/src/portable/template/hcd_template.c b/src/portable/template/hcd_template.c
new file mode 100644
index 000000000..b073d6057
--- /dev/null
+++ b/src/portable/template/hcd_template.c
@@ -0,0 +1,163 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2023 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+#include "tusb_option.h"
+
+#if CFG_TUH_ENABLED && CFG_TUSB_MCU == OPT_MCU_NONE
+
+#include "host/hcd.h"
+
+//--------------------------------------------------------------------+
+// Controller API
+//--------------------------------------------------------------------+
+
+// optional hcd configuration, called by tuh_configure()
+bool hcd_configure(uint8_t rhport, uint32_t cfg_id, const void* cfg_param) {
+  (void) rhport;
+  (void) cfg_id;
+  (void) cfg_param;
+
+  return false;
+}
+
+// Initialize controller to host mode
+bool hcd_init(uint8_t rhport) {
+  (void) rhport;
+
+  return false;
+}
+
+// Interrupt Handler
+void hcd_int_handler(uint8_t rhport, bool in_isr) {
+  (void) rhport;
+  (void) in_isr;
+}
+
+// Enable USB interrupt
+void hcd_int_enable (uint8_t rhport) {
+  (void) rhport;
+}
+
+// Disable USB interrupt
+void hcd_int_disable(uint8_t rhport) {
+  (void) rhport;
+}
+
+// Get frame number (1ms)
+uint32_t hcd_frame_number(uint8_t rhport) {
+  (void) rhport;
+
+  return 0;
+}
+
+//--------------------------------------------------------------------+
+// Port API
+//--------------------------------------------------------------------+
+
+// Get the current connect status of roothub port
+bool hcd_port_connect_status(uint8_t rhport) {
+  (void) rhport;
+
+  return false;
+}
+
+// Reset USB bus on the port. Return immediately, bus reset sequence may not be complete.
+// Some port would require hcd_port_reset_end() to be invoked after 10ms to complete the reset sequence.
+void hcd_port_reset(uint8_t rhport) {
+  (void) rhport;
+}
+
+// Complete bus reset sequence, may be required by some controllers
+void hcd_port_reset_end(uint8_t rhport) {
+  (void) rhport;
+}
+
+// Get port link speed
+tusb_speed_t hcd_port_speed_get(uint8_t rhport) {
+  (void) rhport;
+
+  return TUSB_SPEED_FULL;
+}
+
+// HCD closes all opened endpoints belong to this device
+void hcd_device_close(uint8_t rhport, uint8_t dev_addr) {
+  (void) rhport;
+  (void) dev_addr;
+}
+
+//--------------------------------------------------------------------+
+// Endpoints API
+//--------------------------------------------------------------------+
+
+// Open an endpoint
+bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const * ep_desc) {
+  (void) rhport;
+  (void) dev_addr;
+  (void) ep_desc;
+
+  return false;
+}
+
+// Submit a transfer, when complete hcd_event_xfer_complete() must be invoked
+bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t * buffer, uint16_t buflen) {
+  (void) rhport;
+  (void) dev_addr;
+  (void) ep_addr;
+  (void) buffer;
+  (void) buflen;
+
+  return false;
+}
+
+// Abort a queued transfer. Note: it can only abort transfer that has not been started
+// Return true if a queued transfer is aborted, false if there is no transfer to abort
+bool hcd_edpt_abort_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) {
+  (void) rhport;
+  (void) dev_addr;
+  (void) ep_addr;
+
+  return false;
+}
+
+// Submit a special transfer to send 8-byte Setup Packet, when complete hcd_event_xfer_complete() must be invoked
+bool hcd_setup_send(uint8_t rhport, uint8_t dev_addr, uint8_t const setup_packet[8]) {
+  (void) rhport;
+  (void) dev_addr;
+  (void) setup_packet;
+
+  return false;
+}
+
+// clear stall, data toggle is also reset to DATA0
+bool hcd_edpt_clear_stall(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) {
+  (void) rhport;
+  (void) dev_addr;
+  (void) ep_addr;
+
+  return false;
+}
+
+#endif