diff options
Diffstat (limited to 'src/tusb_option.h')
| -rw-r--r-- | src/tusb_option.h | 147 |
1 files changed, 129 insertions, 18 deletions
diff --git a/src/tusb_option.h b/src/tusb_option.h index fdc949747..e6f5004b6 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -31,11 +31,11 @@ // Version is release as major.minor.revision eg 1.0.0 #define TUSB_VERSION_MAJOR 0 -#define TUSB_VERSION_MINOR 17 +#define TUSB_VERSION_MINOR 18 #define TUSB_VERSION_REVISION 0 #define TUSB_VERSION_NUMBER (TUSB_VERSION_MAJOR * 10000 + TUSB_VERSION_MINOR * 100 + TUSB_VERSION_REVISION) -#define TUSB_VERSION_STRING TU_STRING(TUSB_VERSION_MAJOR) "." TU_STRING(TUSB_VERSION_MINOR) "." TU_STRING(TUSB_VERSION_REVISION) +#define TUSB_VERSION_STRING TU_XSTRING(TUSB_VERSION_MAJOR) "." TU_XSTRING(TUSB_VERSION_MINOR) "." TU_XSTRING(TUSB_VERSION_REVISION) //--------------------------------------------------------------------+ // Supported MCUs @@ -92,6 +92,9 @@ #define OPT_MCU_STM32L5 314 ///< ST L5 #define OPT_MCU_STM32H5 315 ///< ST H5 #define OPT_MCU_STM32U0 316 ///< ST U0 +#define OPT_MCU_STM32H7RS 317 ///< ST F7RS +#define OPT_MCU_STM32C0 318 ///< ST C0 +#define OPT_MCU_STM32N6 319 ///< ST N6 // Sony #define OPT_MCU_CXD56 400 ///< SONY CXD56 @@ -125,7 +128,8 @@ #define OPT_MCU_ESP32C2 905 ///< Espressif ESP32-C2 #define OPT_MCU_ESP32H2 906 ///< Espressif ESP32-H2 #define OPT_MCU_ESP32P4 907 ///< Espressif ESP32-P4 -#define TUP_MCU_ESPRESSIF (CFG_TUSB_MCU >= 900 && CFG_TUSB_MCU < 1000) // check if Espressif MCU +#define TUSB_MCU_VENDOR_ESPRESSIF (CFG_TUSB_MCU >= 900 && CFG_TUSB_MCU < 1000) // check if Espressif MCU +#define TUP_MCU_ESPRESSIF TUSB_MCU_VENDOR_ESPRESSIF // for backward compatibility // Dialog #define OPT_MCU_DA1469X 1000 ///< Dialog Semiconductor DA1469x @@ -149,7 +153,7 @@ #define OPT_MCU_RX63X 1400 ///< Renesas RX63N/631 #define OPT_MCU_RX65X 1401 ///< Renesas RX65N/RX651 #define OPT_MCU_RX72N 1402 ///< Renesas RX72N -#define OPT_MCU_RAXXX 1403 ///< Renesas RAxxx families +#define OPT_MCU_RAXXX 1403 ///< Renesas RA generic // Mind Motion #define OPT_MCU_MM32F327X 1500 ///< Mind Motion MM32F327 @@ -192,6 +196,7 @@ // Analog Devices #define OPT_MCU_MAX32690 2400 ///< ADI MAX32690 +#define OPT_MCU_MAX32665 2401 ///< ADI MAX32666/5 #define OPT_MCU_MAX32666 2401 ///< ADI MAX32666/5 #define OPT_MCU_MAX32650 2402 ///< ADI MAX32650/1/2 #define OPT_MCU_MAX78002 2403 ///< ADI MAX78002 @@ -212,6 +217,7 @@ #define OPT_OS_PICO 5 ///< Raspberry Pi Pico SDK #define OPT_OS_RTTHREAD 6 ///< RT-Thread #define OPT_OS_RTX4 7 ///< Keil RTX 4 +#define OPT_OS_ZEPHYR 8 ///< Zephyr //--------------------------------------------------------------------+ // Mode and Speed @@ -240,17 +246,54 @@ #include "tusb_config.h" #endif +#include "common/tusb_mcu.h" + //--------------------------------------------------------------------+ // USBIP //--------------------------------------------------------------------+ -// DWC2 controller: use DMA for data transfer -// For processors with data cache enabled, USB endpoint buffer region -// (defined by CFG_TUSB_MEM_SECTION) must be declared as non-cacheable. -// For example, on Cortex-M7 the MPU region can be configured as normal -// non-cacheable, with RASR register value: TEX=1 C=0 B=0 S=0. -#ifndef CFG_TUD_DWC2_DMA - #define CFG_TUD_DWC2_DMA 0 +#ifndef CFG_TUD_DWC2_SLAVE_ENABLE + #ifndef CFG_TUD_DWC2_SLAVE_ENABLE_DEFAULT + #define CFG_TUD_DWC2_SLAVE_ENABLE_DEFAULT 1 + #endif + + #define CFG_TUD_DWC2_SLAVE_ENABLE CFG_TUD_DWC2_SLAVE_ENABLE_DEFAULT +#endif + +// Enable DWC2 DMA for device +#ifndef CFG_TUD_DWC2_DMA_ENABLE + #ifndef CFG_TUD_DWC2_DMA_ENABLE_DEFAULT + #define CFG_TUD_DWC2_DMA_ENABLE_DEFAULT 0 + #endif + + #define CFG_TUD_DWC2_DMA_ENABLE CFG_TUD_DWC2_DMA_ENABLE_DEFAULT +#endif + +// Enable CI_HS VBUS Charge. Set this to 1 if the USB_VBUS pin is not connected to 5V VBUS (note: 3.3V is insufficient). +#ifndef CFG_TUD_CI_HS_VBUS_CHARGE + #ifndef CFG_TUD_CI_HS_VBUS_CHARGE_DEFAULT + #define CFG_TUD_CI_HS_VBUS_CHARGE_DEFAULT 0 + #endif + + #define CFG_TUD_CI_HS_VBUS_CHARGE CFG_TUD_CI_HS_VBUS_CHARGE_DEFAULT +#endif + +// Enable DWC2 Slave mode for host +#ifndef CFG_TUH_DWC2_SLAVE_ENABLE + #ifndef CFG_TUH_DWC2_SLAVE_ENABLE_DEFAULT + #define CFG_TUH_DWC2_SLAVE_ENABLE_DEFAULT 1 + #endif + + #define CFG_TUH_DWC2_SLAVE_ENABLE CFG_TUH_DWC2_SLAVE_ENABLE_DEFAULT +#endif + +// Enable DWC2 DMA for host +#ifndef CFG_TUH_DWC2_DMA_ENABLE + #ifndef CFG_TUH_DWC2_DMA_ENABLE_DEFAULT + #define CFG_TUH_DWC2_DMA_ENABLE_DEFAULT 0 + #endif + + #define CFG_TUH_DWC2_DMA_ENABLE CFG_TUH_DWC2_DMA_ENABLE_DEFAULT #endif // Enable PIO-USB software host controller @@ -267,7 +310,6 @@ #define CFG_TUH_MAX3421 0 #endif -#include "common/tusb_mcu.h" //-------------------------------------------------------------------- // RootHub Mode detection @@ -376,13 +418,25 @@ #define CFG_TUSB_MEM_ALIGN TU_ATTR_ALIGNED(4) #endif +#ifndef CFG_TUSB_MEM_DCACHE_LINE_SIZE + #ifndef CFG_TUSB_MEM_DCACHE_LINE_SIZE_DEFAULT + #define CFG_TUSB_MEM_DCACHE_LINE_SIZE_DEFAULT 1 + #endif + + #define CFG_TUSB_MEM_DCACHE_LINE_SIZE CFG_TUSB_MEM_DCACHE_LINE_SIZE_DEFAULT +#endif + // OS selection #ifndef CFG_TUSB_OS - #define CFG_TUSB_OS OPT_OS_NONE + #define CFG_TUSB_OS OPT_OS_NONE #endif #ifndef CFG_TUSB_OS_INC_PATH - #define CFG_TUSB_OS_INC_PATH + #ifndef CFG_TUSB_OS_INC_PATH_DEFAULT + #define CFG_TUSB_OS_INC_PATH_DEFAULT + #endif + + #define CFG_TUSB_OS_INC_PATH CFG_TUSB_OS_INC_PATH_DEFAULT #endif //-------------------------------------------------------------------- @@ -399,6 +453,18 @@ #define CFG_TUD_MEM_ALIGN CFG_TUSB_MEM_ALIGN #endif +#ifndef CFG_TUD_MEM_DCACHE_ENABLE + #ifndef CFG_TUD_MEM_DCACHE_ENABLE_DEFAULT + #define CFG_TUD_MEM_DCACHE_ENABLE_DEFAULT 0 + #endif + + #define CFG_TUD_MEM_DCACHE_ENABLE CFG_TUD_MEM_DCACHE_ENABLE_DEFAULT +#endif + +#ifndef CFG_TUD_MEM_DCACHE_LINE_SIZE + #define CFG_TUD_MEM_DCACHE_LINE_SIZE CFG_TUSB_MEM_DCACHE_LINE_SIZE +#endif + #ifndef CFG_TUD_ENDPOINT0_SIZE #define CFG_TUD_ENDPOINT0_SIZE 64 #endif @@ -506,6 +572,18 @@ #define CFG_TUH_MEM_ALIGN CFG_TUSB_MEM_ALIGN #endif +#ifndef CFG_TUH_MEM_DCACHE_ENABLE + #ifndef CFG_TUH_MEM_DCACHE_ENABLE_DEFAULT + #define CFG_TUH_MEM_DCACHE_ENABLE_DEFAULT 0 + #endif + + #define CFG_TUH_MEM_DCACHE_ENABLE CFG_TUH_MEM_DCACHE_ENABLE_DEFAULT +#endif + +#ifndef CFG_TUH_MEM_DCACHE_LINE_SIZE + #define CFG_TUH_MEM_DCACHE_LINE_SIZE CFG_TUSB_MEM_DCACHE_LINE_SIZE +#endif + //------------- CLASS -------------// #ifndef CFG_TUH_HUB @@ -524,9 +602,22 @@ // List of product IDs that can use the FTDI CDC driver. 0x0403 is FTDI's VID #ifndef CFG_TUH_CDC_FTDI_VID_PID_LIST #define CFG_TUH_CDC_FTDI_VID_PID_LIST \ - {0x0403, 0x6001}, {0x0403, 0x6006}, {0x0403, 0x6010}, {0x0403, 0x6011}, \ - {0x0403, 0x6014}, {0x0403, 0x6015}, {0x0403, 0x8372}, {0x0403, 0xFBFA}, \ - {0x0403, 0xCD18} + {0x0403, 0x6001}, /* Similar device to SIO above */ \ + {0x0403, 0x6006}, /* FTDI's alternate PID for above */ \ + {0x0403, 0x6010}, /* Dual channel device */ \ + {0x0403, 0x6011}, /* Quad channel hi-speed device */ \ + {0x0403, 0x6014}, /* Single channel hi-speed device */ \ + {0x0403, 0x6015}, /* FT-X series (FT201X, FT230X, FT231X, etc) */ \ + {0x0403, 0x6040}, /* Dual channel hi-speed device with PD */ \ + {0x0403, 0x6041}, /* Quad channel hi-speed device with PD */ \ + {0x0403, 0x6042}, /* Dual channel hi-speed device with PD */ \ + {0x0403, 0x6043}, /* Quad channel hi-speed device with PD */ \ + {0x0403, 0x6044}, /* Dual channel hi-speed device with PD */ \ + {0x0403, 0x6045}, /* Dual channel hi-speed device with PD */ \ + {0x0403, 0x6048}, /* Quad channel automotive grade hi-speed device */ \ + {0x0403, 0x8372}, /* Product Id SIO application of 8U100AX */ \ + {0x0403, 0xFBFA}, /* Product ID for FT232RL */ \ + {0x0403, 0xCD18}, /* ??? */ #endif // CP210X is not part of CDC class, only to re-use CDC driver API @@ -537,7 +628,9 @@ // List of product IDs that can use the CP210X CDC driver. 0x10C4 is Silicon Labs' VID #ifndef CFG_TUH_CDC_CP210X_VID_PID_LIST #define CFG_TUH_CDC_CP210X_VID_PID_LIST \ - {0x10C4, 0xEA60}, {0x10C4, 0xEA70} + { 0x10C4, 0xEA60 }, /* Silicon Labs factory default */ \ + { 0x10C4, 0xEA61 }, /* Silicon Labs factory default */ \ + { 0x10C4, 0xEA70 } /* Silicon Labs Dual Port factory default */ #endif #ifndef CFG_TUH_CDC_CH34X @@ -557,6 +650,24 @@ { 0x9986, 0x7523 } /* overtaken from Linux Kernel driver /drivers/usb/serial/ch341.c */ #endif +#ifndef CFG_TUH_CDC_PL2303 + // PL2303 is not part of CDC class, only to re-use CDC driver API + #define CFG_TUH_CDC_PL2303 0 +#endif + +#ifndef CFG_TUH_CDC_PL2303_VID_PID_QUIRKS_LIST + // List of product IDs that can use the PL2303 CDC driver + #define CFG_TUH_CDC_PL2303_VID_PID_LIST \ + { 0x067b, 0x2303 }, /* initial 2303 */ \ + { 0x067b, 0x2304 }, /* TB */ \ + { 0x067b, 0x23a3 }, /* GC */ \ + { 0x067b, 0x23b3 }, /* GB */ \ + { 0x067b, 0x23c3 }, /* GT */ \ + { 0x067b, 0x23d3 }, /* GL */ \ + { 0x067b, 0x23e3 }, /* GE */ \ + { 0x067b, 0x23f3 } /* GS */ +#endif + #ifndef CFG_TUH_HID #define CFG_TUH_HID 0 #endif |