diff options
Diffstat (limited to 'src')
| -rw-r--r-- | src/portable/espressif/esp32s2/dcd_esp32s2.c | 18 |
1 files changed, 9 insertions, 9 deletions
diff --git a/src/portable/espressif/esp32s2/dcd_esp32s2.c b/src/portable/espressif/esp32s2/dcd_esp32s2.c index 3361bde36..df4cbf445 100644 --- a/src/portable/espressif/esp32s2/dcd_esp32s2.c +++ b/src/portable/espressif/esp32s2/dcd_esp32s2.c @@ -136,7 +136,7 @@ static void bus_reset(void) static void enum_done_processing(void) { - ESP_EARLY_LOGV(TAG, "dcd_int_handler - Speed enumeration done! Sending DCD_EVENT_BUS_RESET then"); + ESP_EARLY_LOGV(TAG, "dcd_irq_handler - Speed enumeration done! Sending DCD_EVENT_BUS_RESET then"); // On current silicon on the Full Speed core, speed is fixed to Full Speed. // However, keep for debugging and in case Low Speed is ever supported. uint32_t enum_spd = (USB0.dsts >> USB_ENUMSPD_S) & (USB_ENUMSPD_V); @@ -662,25 +662,25 @@ static void handle_epin_ints(void) } -static void dcd_int_handler(void) +void dcd_irq_handler(void) { const uint32_t int_status = USB0.gintsts; const uint32_t int_msk = USB0.gintmsk; if (int_status & USB_DISCONNINT_M) { - ESP_EARLY_LOGV(TAG, "dcd_int_handler - disconnected"); + ESP_EARLY_LOGV(TAG, "dcd_irq_handler - disconnected"); USB0.gintsts = USB_DISCONNINT_M; } if (int_status & USB_USBRST_M) { - ESP_EARLY_LOGV(TAG, "dcd_int_handler - reset"); + ESP_EARLY_LOGV(TAG, "dcd_irq_handler - reset"); USB0.gintsts = USB_USBRST_M; bus_reset(); } if (int_status & USB_RESETDET_M) { - ESP_EARLY_LOGV(TAG, "dcd_int_handler - reset while suspend"); + ESP_EARLY_LOGV(TAG, "dcd_irq_handler - reset while suspend"); USB0.gintsts = USB_RESETDET_M; bus_reset(); } @@ -700,19 +700,19 @@ static void dcd_int_handler(void) } if ((int_status & USB_RXFLVI_M) & (int_msk & USB_RXFLVIMSK_M)) { - ESP_EARLY_LOGV(TAG, "dcd_int_handler - rx!"); + ESP_EARLY_LOGV(TAG, "dcd_irq_handler - rx!"); read_rx_fifo(); } // OUT endpoint interrupt handling. if (int_status & USB_OEPINT_M) { - ESP_EARLY_LOGV(TAG, "dcd_int_handler - OUT endpoint!"); + ESP_EARLY_LOGV(TAG, "dcd_irq_handler - OUT endpoint!"); handle_epout_ints(); } // IN endpoint interrupt handling. if (int_status & USB_IEPINT_M) { - ESP_EARLY_LOGV(TAG, "dcd_int_handler - IN endpoint!"); + ESP_EARLY_LOGV(TAG, "dcd_irq_handler - IN endpoint!"); handle_epin_ints(); } @@ -737,7 +737,7 @@ static void dcd_int_handler(void) void dcd_int_enable(uint8_t rhport) { (void)rhport; - esp_intr_alloc(ETS_USB_INTR_SOURCE, ESP_INTR_FLAG_LOWMED, (intr_handler_t)dcd_int_handler, NULL, &usb_ih); + esp_intr_alloc(ETS_USB_INTR_SOURCE, ESP_INTR_FLAG_LOWMED, (intr_handler_t)dcd_irq_handler, NULL, &usb_ih); } void dcd_int_disable(uint8_t rhport) |