diff options
Diffstat (limited to 'src')
28 files changed, 1468 insertions, 523 deletions
diff --git a/src/class/audio/audio_device.c b/src/class/audio/audio_device.c index 1a7ce7870..5d3772a9d 100644 --- a/src/class/audio/audio_device.c +++ b/src/class/audio/audio_device.c @@ -631,73 +631,55 @@ static bool audiod_rx_done_cb(uint8_t rhport, audiod_function_t* audio, uint16_t // Decoding according to 2.3.1.5 Audio Streams // Helper function -static inline uint8_t * audiod_interleaved_copy_bytes_fast_decode(uint16_t const nBytesToCopy, void * dst, uint8_t * dst_end, uint8_t * src, uint8_t const n_ff_used) +static inline void * audiod_interleaved_copy_bytes_fast_decode(uint16_t const nBytesPerSample, void * dst, const void * dst_end, void * src, uint8_t const n_ff_used) { + // Due to one FIFO contains 2 channels, data always aligned to (nBytesPerSample * 2) + uint16_t * dst16 = dst; + uint16_t * src16 = src; + const uint16_t * dst_end16 = dst_end; + uint32_t * dst32 = dst; + uint32_t * src32 = src; + const uint32_t * dst_end32 = dst_end; - // This function is an optimized version of - // while((uint8_t *)dst < dst_end) - // { - // memcpy(dst, src, nBytesToCopy); - // dst = (uint8_t *)dst + nBytesToCopy; - // src += nBytesToCopy * n_ff_used; - // } - - // Optimize for fast half word copies - typedef struct{ - uint16_t val; - } __attribute((__packed__)) unaligned_uint16_t; - - // Optimize for fast word copies - typedef struct{ - uint32_t val; - } __attribute((__packed__)) unaligned_uint32_t; - - switch (nBytesToCopy) + if (nBytesPerSample == 1) { - case 1: - while((uint8_t *)dst < dst_end) - { - *(uint8_t *)dst++ = *src; - src += n_ff_used; - } - break; - - case 2: - while((uint8_t *)dst < dst_end) - { - *(unaligned_uint16_t*)dst = *(unaligned_uint16_t*)src; - dst += 2; - src += 2 * n_ff_used; - } - break; - - case 3: - while((uint8_t *)dst < dst_end) - { - // memcpy(dst, src, 3); - // dst = (uint8_t *)dst + 3; - // src += 3 * n_ff_used; - - // TODO: Is there a faster way to copy 3 bytes? - *(uint8_t *)dst++ = *src++; - *(uint8_t *)dst++ = *src++; - *(uint8_t *)dst++ = *src++; - - src += 3 * (n_ff_used - 1); - } - break; - - case 4: - while((uint8_t *)dst < dst_end) - { - *(unaligned_uint32_t*)dst = *(unaligned_uint32_t*)src; - dst += 4; - src += 4 * n_ff_used; - } - break; + while(dst16 < dst_end16) + { + *dst16++ = *src16++; + src16 += n_ff_used - 1; + } + return src16; + } + else if (nBytesPerSample == 2) + { + while(dst32 < dst_end32) + { + *dst32++ = *src32++; + src32 += n_ff_used - 1; + } + return src32; + } + else if (nBytesPerSample == 3) + { + while(dst16 < dst_end16) + { + *dst16++ = *src16++; + *dst16++ = *src16++; + *dst16++ = *src16++; + src16 += 3 * (n_ff_used - 1); + } + return src16; + } + else // nBytesPerSample == 4 + { + while(dst32 < dst_end32) + { + *dst32++ = *src32++; + *dst32++ = *src32++; + src32 += 2 * (n_ff_used - 1); + } + return src32; } - - return src; } static bool audiod_decode_type_I_pcm(uint8_t rhport, audiod_function_t* audio, uint16_t n_bytes_received) @@ -944,64 +926,55 @@ range [-1, +1) * */ // Helper function -static inline uint8_t * audiod_interleaved_copy_bytes_fast_encode(uint16_t const nBytesToCopy, uint8_t * src, uint8_t * src_end, uint8_t * dst, uint8_t const n_ff_used) +static inline void * audiod_interleaved_copy_bytes_fast_encode(uint16_t const nBytesPerSample, void * src, const void * src_end, void * dst, uint8_t const n_ff_used) { - // Optimize for fast half word copies - typedef struct{ - uint16_t val; - } __attribute((__packed__)) unaligned_uint16_t; - - // Optimize for fast word copies - typedef struct{ - uint32_t val; - } __attribute((__packed__)) unaligned_uint32_t; + // Due to one FIFO contains 2 channels, data always aligned to (nBytesPerSample * 2) + uint16_t * dst16 = dst; + uint16_t * src16 = src; + const uint16_t * src_end16 = src_end; + uint32_t * dst32 = dst; + uint32_t * src32 = src; + const uint32_t * src_end32 = src_end; - switch (nBytesToCopy) + if (nBytesPerSample == 1) { - case 1: - while(src < src_end) - { - *dst = *src++; - dst += n_ff_used; - } - break; - - case 2: - while(src < src_end) - { - *(unaligned_uint16_t*)dst = *(unaligned_uint16_t*)src; - src += 2; - dst += 2 * n_ff_used; - } - break; - - case 3: - while(src < src_end) - { - // memcpy(dst, src, 3); - // src = (uint8_t *)src + 3; - // dst += 3 * n_ff_used; - - // TODO: Is there a faster way to copy 3 bytes? - *dst++ = *src++; - *dst++ = *src++; - *dst++ = *src++; - - dst += 3 * (n_ff_used - 1); - } - break; - - case 4: - while(src < src_end) - { - *(unaligned_uint32_t*)dst = *(unaligned_uint32_t*)src; - src += 4; - dst += 4 * n_ff_used; - } - break; + while(src16 < src_end16) + { + *dst16++ = *src16++; + dst16 += n_ff_used - 1; + } + return dst16; + } + else if (nBytesPerSample == 2) + { + while(src32 < src_end32) + { + *dst32++ = *src32++; + dst32 += n_ff_used - 1; + } + return dst32; + } + else if (nBytesPerSample == 3) + { + while(src16 < src_end16) + { + *dst16++ = *src16++; + *dst16++ = *src16++; + *dst16++ = *src16++; + dst16 += 3 * (n_ff_used - 1); + } + return dst16; + } + else // nBytesPerSample == 4 + { + while(src32 < src_end32) + { + *dst32++ = *src32++; + *dst32++ = *src32++; + dst32 += 2 * (n_ff_used - 1); + } + return dst32; } - - return dst; } static uint16_t audiod_encode_type_I_pcm(uint8_t rhport, audiod_function_t* audio) diff --git a/src/class/msc/msc_host.c b/src/class/msc/msc_host.c index da264142c..39f2d9f1c 100644 --- a/src/class/msc/msc_host.c +++ b/src/class/msc/msc_host.c @@ -43,16 +43,14 @@ //--------------------------------------------------------------------+ // MACRO CONSTANT TYPEDEF //--------------------------------------------------------------------+ -enum -{ +enum { MSC_STAGE_IDLE = 0, MSC_STAGE_CMD, MSC_STAGE_DATA, MSC_STAGE_STATUS, }; -typedef struct -{ +typedef struct { uint8_t itf_num; uint8_t ep_in; uint8_t ep_out; @@ -69,13 +67,13 @@ typedef struct //------------- SCSI -------------// uint8_t stage; - void* buffer; + void* buffer; tuh_msc_complete_cb_t complete_cb; uintptr_t complete_arg; CFG_TUH_MEM_ALIGN msc_cbw_t cbw; CFG_TUH_MEM_ALIGN msc_csw_t csw; -}msch_interface_t; +} msch_interface_t; CFG_TUH_MEM_SECTION static msch_interface_t _msch_itf[CFG_TUH_DEVICE_MAX]; @@ -86,40 +84,34 @@ static uint8_t _msch_buffer[sizeof(scsi_inquiry_resp_t)]; // FIXME potential nul reference TU_ATTR_ALWAYS_INLINE -static inline msch_interface_t* get_itf(uint8_t dev_addr) -{ - return &_msch_itf[dev_addr-1]; +static inline msch_interface_t* get_itf(uint8_t dev_addr) { + return &_msch_itf[dev_addr - 1]; } //--------------------------------------------------------------------+ // PUBLIC API //--------------------------------------------------------------------+ -uint8_t tuh_msc_get_maxlun(uint8_t dev_addr) -{ +uint8_t tuh_msc_get_maxlun(uint8_t dev_addr) { msch_interface_t* p_msc = get_itf(dev_addr); return p_msc->max_lun; } -uint32_t tuh_msc_get_block_count(uint8_t dev_addr, uint8_t lun) -{ +uint32_t tuh_msc_get_block_count(uint8_t dev_addr, uint8_t lun) { msch_interface_t* p_msc = get_itf(dev_addr); return p_msc->capacity[lun].block_count; } -uint32_t tuh_msc_get_block_size(uint8_t dev_addr, uint8_t lun) -{ +uint32_t tuh_msc_get_block_size(uint8_t dev_addr, uint8_t lun) { msch_interface_t* p_msc = get_itf(dev_addr); return p_msc->capacity[lun].block_size; } -bool tuh_msc_mounted(uint8_t dev_addr) -{ +bool tuh_msc_mounted(uint8_t dev_addr) { msch_interface_t* p_msc = get_itf(dev_addr); return p_msc->mounted; } -bool tuh_msc_ready(uint8_t dev_addr) -{ +bool tuh_msc_ready(uint8_t dev_addr) { msch_interface_t* p_msc = get_itf(dev_addr); return p_msc->mounted && !usbh_edpt_busy(dev_addr, p_msc->ep_in) && !usbh_edpt_busy(dev_addr, p_msc->ep_out); } @@ -127,20 +119,20 @@ bool tuh_msc_ready(uint8_t dev_addr) //--------------------------------------------------------------------+ // PUBLIC API: SCSI COMMAND //--------------------------------------------------------------------+ -static inline void cbw_init(msc_cbw_t *cbw, uint8_t lun) -{ +static inline void cbw_init(msc_cbw_t* cbw, uint8_t lun) { tu_memclr(cbw, sizeof(msc_cbw_t)); cbw->signature = MSC_CBW_SIGNATURE; cbw->tag = 0x54555342; // TUSB cbw->lun = lun; } -bool tuh_msc_scsi_command(uint8_t dev_addr, msc_cbw_t const* cbw, void* data, tuh_msc_complete_cb_t complete_cb, uintptr_t arg) -{ - msch_interface_t* p_msc = get_itf(dev_addr); +bool tuh_msc_scsi_command(uint8_t daddr, msc_cbw_t const* cbw, void* data, + tuh_msc_complete_cb_t complete_cb, uintptr_t arg) { + msch_interface_t* p_msc = get_itf(daddr); TU_VERIFY(p_msc->configured); - // TODO claim endpoint + // claim endpoint + TU_VERIFY(usbh_edpt_claim(daddr, p_msc->ep_out)); p_msc->cbw = *cbw; p_msc->stage = MSC_STAGE_CMD; @@ -148,15 +140,18 @@ bool tuh_msc_scsi_command(uint8_t dev_addr, msc_cbw_t const* cbw, void* data, tu p_msc->complete_cb = complete_cb; p_msc->complete_arg = arg; - TU_ASSERT(usbh_edpt_xfer(dev_addr, p_msc->ep_out, (uint8_t*) &p_msc->cbw, sizeof(msc_cbw_t))); + if (!usbh_edpt_xfer(daddr, p_msc->ep_out, (uint8_t*) &p_msc->cbw, sizeof(msc_cbw_t))) { + usbh_edpt_release(daddr, p_msc->ep_out); + return false; + } return true; } -bool tuh_msc_read_capacity(uint8_t dev_addr, uint8_t lun, scsi_read_capacity10_resp_t* response, tuh_msc_complete_cb_t complete_cb, uintptr_t arg) -{ - msch_interface_t* p_msc = get_itf(dev_addr); - TU_VERIFY(p_msc->configured); +bool tuh_msc_read_capacity(uint8_t dev_addr, uint8_t lun, scsi_read_capacity10_resp_t* response, + tuh_msc_complete_cb_t complete_cb, uintptr_t arg) { + msch_interface_t* p_msc = get_itf(dev_addr); + TU_VERIFY(p_msc->configured); msc_cbw_t cbw; cbw_init(&cbw, lun); @@ -169,8 +164,8 @@ bool tuh_msc_read_capacity(uint8_t dev_addr, uint8_t lun, scsi_read_capacity10_r return tuh_msc_scsi_command(dev_addr, &cbw, response, complete_cb, arg); } -bool tuh_msc_inquiry(uint8_t dev_addr, uint8_t lun, scsi_inquiry_resp_t* response, tuh_msc_complete_cb_t complete_cb, uintptr_t arg) -{ +bool tuh_msc_inquiry(uint8_t dev_addr, uint8_t lun, scsi_inquiry_resp_t* response, + tuh_msc_complete_cb_t complete_cb, uintptr_t arg) { msch_interface_t* p_msc = get_itf(dev_addr); TU_VERIFY(p_msc->mounted); @@ -181,18 +176,16 @@ bool tuh_msc_inquiry(uint8_t dev_addr, uint8_t lun, scsi_inquiry_resp_t* respons cbw.dir = TUSB_DIR_IN_MASK; cbw.cmd_len = sizeof(scsi_inquiry_t); - scsi_inquiry_t const cmd_inquiry = - { - .cmd_code = SCSI_CMD_INQUIRY, - .alloc_length = sizeof(scsi_inquiry_resp_t) + scsi_inquiry_t const cmd_inquiry = { + .cmd_code = SCSI_CMD_INQUIRY, + .alloc_length = sizeof(scsi_inquiry_resp_t) }; memcpy(cbw.command, &cmd_inquiry, cbw.cmd_len); return tuh_msc_scsi_command(dev_addr, &cbw, response, complete_cb, arg); } -bool tuh_msc_test_unit_ready(uint8_t dev_addr, uint8_t lun, tuh_msc_complete_cb_t complete_cb, uintptr_t arg) -{ +bool tuh_msc_test_unit_ready(uint8_t dev_addr, uint8_t lun, tuh_msc_complete_cb_t complete_cb, uintptr_t arg) { msch_interface_t* p_msc = get_itf(dev_addr); TU_VERIFY(p_msc->configured); @@ -200,16 +193,16 @@ bool tuh_msc_test_unit_ready(uint8_t dev_addr, uint8_t lun, tuh_msc_complete_cb_ cbw_init(&cbw, lun); cbw.total_bytes = 0; - cbw.dir = TUSB_DIR_OUT; - cbw.cmd_len = sizeof(scsi_test_unit_ready_t); - cbw.command[0] = SCSI_CMD_TEST_UNIT_READY; - cbw.command[1] = lun; // according to wiki TODO need verification + cbw.dir = TUSB_DIR_OUT; + cbw.cmd_len = sizeof(scsi_test_unit_ready_t); + cbw.command[0] = SCSI_CMD_TEST_UNIT_READY; + cbw.command[1] = lun; // according to wiki TODO need verification return tuh_msc_scsi_command(dev_addr, &cbw, NULL, complete_cb, arg); } -bool tuh_msc_request_sense(uint8_t dev_addr, uint8_t lun, void *response, tuh_msc_complete_cb_t complete_cb, uintptr_t arg) -{ +bool tuh_msc_request_sense(uint8_t dev_addr, uint8_t lun, void* response, + tuh_msc_complete_cb_t complete_cb, uintptr_t arg) { msc_cbw_t cbw; cbw_init(&cbw, lun); @@ -217,73 +210,64 @@ bool tuh_msc_request_sense(uint8_t dev_addr, uint8_t lun, void *response, tuh_ms cbw.dir = TUSB_DIR_IN_MASK; cbw.cmd_len = sizeof(scsi_request_sense_t); - scsi_request_sense_t const cmd_request_sense = - { - .cmd_code = SCSI_CMD_REQUEST_SENSE, - .alloc_length = 18 + scsi_request_sense_t const cmd_request_sense = { + .cmd_code = SCSI_CMD_REQUEST_SENSE, + .alloc_length = 18 }; - memcpy(cbw.command, &cmd_request_sense, cbw.cmd_len); return tuh_msc_scsi_command(dev_addr, &cbw, response, complete_cb, arg); } -bool tuh_msc_read10(uint8_t dev_addr, uint8_t lun, void * buffer, uint32_t lba, uint16_t block_count, tuh_msc_complete_cb_t complete_cb, uintptr_t arg) -{ +bool tuh_msc_read10(uint8_t dev_addr, uint8_t lun, void* buffer, uint32_t lba, uint16_t block_count, + tuh_msc_complete_cb_t complete_cb, uintptr_t arg) { msch_interface_t* p_msc = get_itf(dev_addr); TU_VERIFY(p_msc->mounted); msc_cbw_t cbw; cbw_init(&cbw, lun); - cbw.total_bytes = block_count*p_msc->capacity[lun].block_size; - cbw.dir = TUSB_DIR_IN_MASK; - cbw.cmd_len = sizeof(scsi_read10_t); + cbw.total_bytes = block_count * p_msc->capacity[lun].block_size; + cbw.dir = TUSB_DIR_IN_MASK; + cbw.cmd_len = sizeof(scsi_read10_t); - scsi_read10_t const cmd_read10 = - { - .cmd_code = SCSI_CMD_READ_10, - .lba = tu_htonl(lba), - .block_count = tu_htons(block_count) + scsi_read10_t const cmd_read10 = { + .cmd_code = SCSI_CMD_READ_10, + .lba = tu_htonl(lba), + .block_count = tu_htons(block_count) }; - memcpy(cbw.command, &cmd_read10, cbw.cmd_len); return tuh_msc_scsi_command(dev_addr, &cbw, buffer, complete_cb, arg); } -bool tuh_msc_write10(uint8_t dev_addr, uint8_t lun, void const * buffer, uint32_t lba, uint16_t block_count, tuh_msc_complete_cb_t complete_cb, uintptr_t arg) -{ +bool tuh_msc_write10(uint8_t dev_addr, uint8_t lun, void const* buffer, uint32_t lba, uint16_t block_count, + tuh_msc_complete_cb_t complete_cb, uintptr_t arg) { msch_interface_t* p_msc = get_itf(dev_addr); TU_VERIFY(p_msc->mounted); msc_cbw_t cbw; cbw_init(&cbw, lun); - cbw.total_bytes = block_count*p_msc->capacity[lun].block_size; + cbw.total_bytes = block_count * p_msc->capacity[lun].block_size; cbw.dir = TUSB_DIR_OUT; cbw.cmd_len = sizeof(scsi_write10_t); - scsi_write10_t const cmd_write10 = - { - .cmd_code = SCSI_CMD_WRITE_10, - .lba = tu_htonl(lba), - .block_count = tu_htons(block_count) + scsi_write10_t const cmd_write10 = { + .cmd_code = SCSI_CMD_WRITE_10, + .lba = tu_htonl(lba), + .block_count = tu_htons(block_count) }; - memcpy(cbw.command, &cmd_write10, cbw.cmd_len); - return tuh_msc_scsi_command(dev_addr, &cbw, (void*)(uintptr_t) buffer, complete_cb, arg); + return tuh_msc_scsi_command(dev_addr, &cbw, (void*) (uintptr_t) buffer, complete_cb, arg); } #if 0 // MSC interface Reset (not used now) -bool tuh_msc_reset(uint8_t dev_addr) -{ - tusb_control_request_t const new_request = - { - .bmRequestType_bit = - { +bool tuh_msc_reset(uint8_t dev_addr) { + tusb_control_request_t const new_request = { + .bmRequestType_bit = { .recipient = TUSB_REQ_RCPT_INTERFACE, .type = TUSB_REQ_TYPE_CLASS, .direction = TUSB_DIR_OUT @@ -300,79 +284,71 @@ bool tuh_msc_reset(uint8_t dev_addr) //--------------------------------------------------------------------+ // CLASS-USBH API //--------------------------------------------------------------------+ -void msch_init(void) -{ +void msch_init(void) { tu_memclr(_msch_itf, sizeof(_msch_itf)); } -void msch_close(uint8_t dev_addr) -{ - TU_VERIFY(dev_addr <= CFG_TUH_DEVICE_MAX, ); +void msch_close(uint8_t dev_addr) { + TU_VERIFY(dev_addr <= CFG_TUH_DEVICE_MAX,); msch_interface_t* p_msc = get_itf(dev_addr); - TU_VERIFY(p_msc->configured, ); + TU_VERIFY(p_msc->configured,); TU_LOG_DRV(" MSCh close addr = %d\r\n", dev_addr); // invoke Application Callback if (p_msc->mounted) { - if(tuh_msc_umount_cb) tuh_msc_umount_cb(dev_addr); + if (tuh_msc_umount_cb) tuh_msc_umount_cb(dev_addr); } tu_memclr(p_msc, sizeof(msch_interface_t)); } -bool msch_xfer_cb(uint8_t dev_addr, uint8_t ep_addr, xfer_result_t event, uint32_t xferred_bytes) -{ +bool msch_xfer_cb(uint8_t dev_addr, uint8_t ep_addr, xfer_result_t event, uint32_t xferred_bytes) { msch_interface_t* p_msc = get_itf(dev_addr); msc_cbw_t const * cbw = &p_msc->cbw; msc_csw_t * csw = &p_msc->csw; - switch (p_msc->stage) - { + switch (p_msc->stage) { case MSC_STAGE_CMD: // Must be Command Block - TU_ASSERT(ep_addr == p_msc->ep_out && event == XFER_RESULT_SUCCESS && xferred_bytes == sizeof(msc_cbw_t)); + TU_ASSERT(ep_addr == p_msc->ep_out && event == XFER_RESULT_SUCCESS && xferred_bytes == sizeof(msc_cbw_t)); - if ( cbw->total_bytes && p_msc->buffer ) - { + if (cbw->total_bytes && p_msc->buffer) { // Data stage if any p_msc->stage = MSC_STAGE_DATA; - uint8_t const ep_data = (cbw->dir & TUSB_DIR_IN_MASK) ? p_msc->ep_in : p_msc->ep_out; TU_ASSERT(usbh_edpt_xfer(dev_addr, ep_data, p_msc->buffer, (uint16_t) cbw->total_bytes)); - }else - { + } else { // Status stage p_msc->stage = MSC_STAGE_STATUS; TU_ASSERT(usbh_edpt_xfer(dev_addr, p_msc->ep_in, (uint8_t*) &p_msc->csw, (uint16_t) sizeof(msc_csw_t))); } - break; + break; case MSC_STAGE_DATA: // Status stage p_msc->stage = MSC_STAGE_STATUS; TU_ASSERT(usbh_edpt_xfer(dev_addr, p_msc->ep_in, (uint8_t*) &p_msc->csw, (uint16_t) sizeof(msc_csw_t))); - break; + break; case MSC_STAGE_STATUS: // SCSI op is complete p_msc->stage = MSC_STAGE_IDLE; - if (p_msc->complete_cb) - { - tuh_msc_complete_data_t const cb_data = - { - .cbw = cbw, - .csw = csw, - .scsi_data = p_msc->buffer, - .user_arg = p_msc->complete_arg + if (p_msc->complete_cb) { + tuh_msc_complete_data_t const cb_data = { + .cbw = cbw, + .csw = csw, + .scsi_data = p_msc->buffer, + .user_arg = p_msc->complete_arg }; p_msc->complete_cb(dev_addr, &cb_data); } - break; + break; - // unknown state - default: break; + // unknown state + default: + break; } return true; @@ -381,39 +357,35 @@ bool msch_xfer_cb(uint8_t dev_addr, uint8_t ep_addr, xfer_result_t event, uint32 //--------------------------------------------------------------------+ // MSC Enumeration //--------------------------------------------------------------------+ - -static void config_get_maxlun_complete (tuh_xfer_t* xfer); -static bool config_test_unit_ready_complete(uint8_t dev_addr, tuh_msc_complete_data_t const * cb_data); +static void config_get_maxlun_complete(tuh_xfer_t* xfer); +static bool config_test_unit_ready_complete(uint8_t dev_addr, tuh_msc_complete_data_t const* cb_data); static bool config_request_sense_complete(uint8_t dev_addr, tuh_msc_complete_data_t const* cb_data); static bool config_read_capacity_complete(uint8_t dev_addr, tuh_msc_complete_data_t const* cb_data); -bool msch_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_interface_t const *desc_itf, uint16_t max_len) -{ +bool msch_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_interface_t const* desc_itf, uint16_t max_len) { (void) rhport; TU_VERIFY (MSC_SUBCLASS_SCSI == desc_itf->bInterfaceSubClass && - MSC_PROTOCOL_BOT == desc_itf->bInterfaceProtocol); + MSC_PROTOCOL_BOT == desc_itf->bInterfaceProtocol); // msc driver length is fixed - uint16_t const drv_len = (uint16_t) (sizeof(tusb_desc_interface_t) + desc_itf->bNumEndpoints * sizeof(tusb_desc_endpoint_t)); + uint16_t const drv_len = (uint16_t) (sizeof(tusb_desc_interface_t) + + desc_itf->bNumEndpoints * sizeof(tusb_desc_endpoint_t)); TU_ASSERT(drv_len <= max_len); msch_interface_t* p_msc = get_itf(dev_addr); - tusb_desc_endpoint_t const * ep_desc = (tusb_desc_endpoint_t const *) tu_desc_next(desc_itf); + tusb_desc_endpoint_t const* ep_desc = (tusb_desc_endpoint_t const*) tu_desc_next(desc_itf); - for(uint32_t i=0; i<2; i++) - { + for (uint32_t i = 0; i < 2; i++) { TU_ASSERT(TUSB_DESC_ENDPOINT == ep_desc->bDescriptorType && TUSB_XFER_BULK == ep_desc->bmAttributes.xfer); TU_ASSERT(tuh_edpt_open(dev_addr, ep_desc)); - if ( tu_edpt_dir(ep_desc->bEndpointAddress) == TUSB_DIR_IN ) - { + if (TUSB_DIR_IN == tu_edpt_dir(ep_desc->bEndpointAddress)) { p_msc->ep_in = ep_desc->bEndpointAddress; - }else - { + } else { p_msc->ep_out = ep_desc->bEndpointAddress; } - ep_desc = (tusb_desc_endpoint_t const *) tu_desc_next(ep_desc); + ep_desc = (tusb_desc_endpoint_t const*) tu_desc_next(ep_desc); } p_msc->itf_num = desc_itf->bInterfaceNumber; @@ -430,32 +402,31 @@ bool msch_set_config(uint8_t dev_addr, uint8_t itf_num) { //------------- Get Max Lun -------------// TU_LOG_DRV("MSC Get Max Lun\r\n"); tusb_control_request_t const request = { - .bmRequestType_bit = { - .recipient = TUSB_REQ_RCPT_INTERFACE, - .type = TUSB_REQ_TYPE_CLASS, - .direction = TUSB_DIR_IN - }, - .bRequest = MSC_REQ_GET_MAX_LUN, - .wValue = 0, - .wIndex = itf_num, - .wLength = 1 + .bmRequestType_bit = { + .recipient = TUSB_REQ_RCPT_INTERFACE, + .type = TUSB_REQ_TYPE_CLASS, + .direction = TUSB_DIR_IN + }, + .bRequest = MSC_REQ_GET_MAX_LUN, + .wValue = 0, + .wIndex = itf_num, + .wLength = 1 }; tuh_xfer_t xfer = { - .daddr = dev_addr, - .ep_addr = 0, - .setup = &request, - .buffer = _msch_buffer, - .complete_cb = config_get_maxlun_complete, - .user_data = 0 + .daddr = dev_addr, + .ep_addr = 0, + .setup = &request, + .buffer = _msch_buffer, + .complete_cb = config_get_maxlun_complete, + .user_data = 0 }; TU_ASSERT(tuh_control_xfer(&xfer)); return true; } -static void config_get_maxlun_complete (tuh_xfer_t* xfer) -{ +static void config_get_maxlun_complete(tuh_xfer_t* xfer) { uint8_t const daddr = xfer->daddr; msch_interface_t* p_msc = get_itf(daddr); @@ -471,18 +442,16 @@ static void config_get_maxlun_complete (tuh_xfer_t* xfer) tuh_msc_test_unit_ready(daddr, lun, config_test_unit_ready_complete, 0); } -static bool config_test_unit_ready_complete(uint8_t dev_addr, tuh_msc_complete_data_t const * cb_data) -{ +static bool config_test_unit_ready_complete(uint8_t dev_addr, tuh_msc_complete_data_t const* cb_data) { msc_cbw_t const* cbw = cb_data->cbw; msc_csw_t const* csw = cb_data->csw; - if (csw->status == 0) - { + if (csw->status == 0) { // Unit is ready, read its capacity TU_LOG_DRV("SCSI Read Capacity\r\n"); - tuh_msc_read_capacity(dev_addr, cbw->lun, (scsi_read_capacity10_resp_t*) ((void*) _msch_buffer), config_read_capacity_complete, 0); - }else - { + tuh_msc_read_capacity(dev_addr, cbw->lun, (scsi_read_capacity10_resp_t*) ((void*) _msch_buffer), + config_read_capacity_complete, 0); + } else { // Note: During enumeration, some device fails Test Unit Ready and require a few retries // with Request Sense to start working !! // TODO limit number of retries @@ -493,8 +462,7 @@ static bool config_test_unit_ready_complete(uint8_t dev_addr, tuh_msc_complete_d return true; } -static bool config_request_sense_complete(uint8_t dev_addr, tuh_msc_complete_data_t const * cb_data) -{ +static bool config_request_sense_complete(uint8_t dev_addr, tuh_msc_complete_data_t const* cb_data) { msc_cbw_t const* cbw = cb_data->cbw; msc_csw_t const* csw = cb_data->csw; @@ -503,8 +471,7 @@ static bool config_request_sense_complete(uint8_t dev_addr, tuh_msc_complete_dat return true; } -static bool config_read_capacity_complete(uint8_t dev_addr, tuh_msc_complete_data_t const * cb_data) -{ +static bool config_read_capacity_complete(uint8_t dev_addr, tuh_msc_complete_data_t const* cb_data) { msc_cbw_t const* cbw = cb_data->cbw; msc_csw_t const* csw = cb_data->csw; diff --git a/src/class/msc/msc_host.h b/src/class/msc/msc_host.h index 6c0e5c9dd..9ca1b4703 100644 --- a/src/class/msc/msc_host.h +++ b/src/class/msc/msc_host.h @@ -24,8 +24,8 @@ * This file is part of the TinyUSB stack. */ -#ifndef _TUSB_MSC_HOST_H_ -#define _TUSB_MSC_HOST_H_ +#ifndef TUSB_MSC_HOST_H_ +#define TUSB_MSC_HOST_H_ #include "msc.h" @@ -73,7 +73,7 @@ uint32_t tuh_msc_get_block_size(uint8_t dev_addr, uint8_t lun); // Perform a full SCSI command (cbw, data, csw) in non-blocking manner. // Complete callback is invoked when SCSI op is complete. // return true if success, false if there is already pending operation. -bool tuh_msc_scsi_command(uint8_t dev_addr, msc_cbw_t const* cbw, void* data, tuh_msc_complete_cb_t complete_cb, uintptr_t arg); +bool tuh_msc_scsi_command(uint8_t daddr, msc_cbw_t const* cbw, void* data, tuh_msc_complete_cb_t complete_cb, uintptr_t arg); // Perform SCSI Inquiry command // Complete callback is invoked when SCSI op is complete. @@ -123,4 +123,4 @@ bool msch_xfer_cb (uint8_t dev_addr, uint8_t ep_addr, xfer_result_t event, ui } #endif -#endif /* _TUSB_MSC_HOST_H_ */ +#endif diff --git a/src/common/tusb_common.h b/src/common/tusb_common.h index c303c6eaf..caeb5f2ef 100644 --- a/src/common/tusb_common.h +++ b/src/common/tusb_common.h @@ -75,8 +75,6 @@ #include "tusb_types.h" #include "tusb_debug.h" -#include "tusb_timeout.h" // TODO remove - //--------------------------------------------------------------------+ // Optional API implemented by application if needed // TODO move to a more ovious place/file @@ -122,13 +120,11 @@ TU_ATTR_ALWAYS_INLINE static inline int tu_memcpy_s(void *dest, size_t destsz, c //------------- Bytes -------------// -TU_ATTR_ALWAYS_INLINE static inline uint32_t tu_u32(uint8_t b3, uint8_t b2, uint8_t b1, uint8_t b0) -{ +TU_ATTR_ALWAYS_INLINE static inline uint32_t tu_u32(uint8_t b3, uint8_t b2, uint8_t b1, uint8_t b0) { return ( ((uint32_t) b3) << 24) | ( ((uint32_t) b2) << 16) | ( ((uint32_t) b1) << 8) | b0; } -TU_ATTR_ALWAYS_INLINE static inline uint16_t tu_u16(uint8_t high, uint8_t low) -{ +TU_ATTR_ALWAYS_INLINE static inline uint16_t tu_u16(uint8_t high, uint8_t low) { return (uint16_t) ((((uint16_t) high) << 8) | low); } diff --git a/src/common/tusb_debug.h b/src/common/tusb_debug.h index 36507041f..99176c02a 100644 --- a/src/common/tusb_debug.h +++ b/src/common/tusb_debug.h @@ -58,16 +58,14 @@ void tu_print_mem(void const *buf, uint32_t count, uint8_t indent); #define tu_printf printf #endif -static inline void tu_print_arr(uint8_t const* buf, uint32_t bufsize) -{ +static inline void tu_print_buf(uint8_t const* buf, uint32_t bufsize) { for(uint32_t i=0; i<bufsize; i++) tu_printf("%02X ", buf[i]); } // Log with Level #define TU_LOG(n, ...) TU_XSTRCAT(TU_LOG, n)(__VA_ARGS__) #define TU_LOG_MEM(n, ...) TU_XSTRCAT3(TU_LOG, n, _MEM)(__VA_ARGS__) -#define TU_LOG_ARR(n, ...) TU_XSTRCAT3(TU_LOG, n, _ARR)(__VA_ARGS__) -#define TU_LOG_PTR(n, ...) TU_XSTRCAT3(TU_LOG, n, _PTR)(__VA_ARGS__) +#define TU_LOG_BUF(n, ...) TU_XSTRCAT3(TU_LOG, n, _BUF)(__VA_ARGS__) #define TU_LOG_INT(n, ...) TU_XSTRCAT3(TU_LOG, n, _INT)(__VA_ARGS__) #define TU_LOG_HEX(n, ...) TU_XSTRCAT3(TU_LOG, n, _HEX)(__VA_ARGS__) #define TU_LOG_LOCATION() tu_printf("%s: %d:\r\n", __PRETTY_FUNCTION__, __LINE__) @@ -76,8 +74,7 @@ static inline void tu_print_arr(uint8_t const* buf, uint32_t bufsize) // Log Level 1: Error #define TU_LOG1 tu_printf #define TU_LOG1_MEM tu_print_mem -#define TU_LOG1_ARR(_x, _n) tu_print_arr((uint8_t const*)(_x), _n) -#define TU_LOG1_PTR(_x) tu_print_arr((uint8_t const*)(_x), sizeof(*(_x))) +#define TU_LOG1_BUF(_x, _n) tu_print_buf((uint8_t const*)(_x), _n) #define TU_LOG1_INT(_x) tu_printf(#_x " = %ld\r\n", (unsigned long) (_x) ) #define TU_LOG1_HEX(_x) tu_printf(#_x " = %lX\r\n", (unsigned long) (_x) ) @@ -85,8 +82,7 @@ static inline void tu_print_arr(uint8_t const* buf, uint32_t bufsize) #if CFG_TUSB_DEBUG >= 2 #define TU_LOG2 TU_LOG1 #define TU_LOG2_MEM TU_LOG1_MEM - #define TU_LOG2_ARR TU_LOG1_ARR - #define TU_LOG2_PTR TU_LOG1_PTR + #define TU_LOG2_BUF TU_LOG1_BUF #define TU_LOG2_INT TU_LOG1_INT #define TU_LOG2_HEX TU_LOG1_HEX #endif @@ -95,30 +91,25 @@ static inline void tu_print_arr(uint8_t const* buf, uint32_t bufsize) #if CFG_TUSB_DEBUG >= 3 #define TU_LOG3 TU_LOG1 #define TU_LOG3_MEM TU_LOG1_MEM - #define TU_LOG3_ARR TU_LOG1_ARR - #define TU_LOG3_PTR TU_LOG1_PTR + #define TU_LOG3_BUF TU_LOG1_BUF #define TU_LOG3_INT TU_LOG1_INT #define TU_LOG3_HEX TU_LOG1_HEX #endif -typedef struct -{ +typedef struct { uint32_t key; const char* data; } tu_lookup_entry_t; -typedef struct -{ +typedef struct { uint16_t count; tu_lookup_entry_t const* items; } tu_lookup_table_t; -static inline const char* tu_lookup_find(tu_lookup_table_t const* p_table, uint32_t key) -{ +static inline const char* tu_lookup_find(tu_lookup_table_t const* p_table, uint32_t key) { tu_static char not_found[11]; - for(uint16_t i=0; i<p_table->count; i++) - { + for(uint16_t i=0; i<p_table->count; i++) { if (p_table->items[i].key == key) return p_table->items[i].data; } @@ -133,7 +124,7 @@ static inline const char* tu_lookup_find(tu_lookup_table_t const* p_table, uint3 #ifndef TU_LOG #define TU_LOG(n, ...) #define TU_LOG_MEM(n, ...) - #define TU_LOG_PTR(n, ...) + #define TU_LOG_BUF(n, ...) #define TU_LOG_INT(n, ...) #define TU_LOG_HEX(n, ...) #define TU_LOG_LOCATION() @@ -144,14 +135,14 @@ static inline const char* tu_lookup_find(tu_lookup_table_t const* p_table, uint3 #define TU_LOG0(...) #define TU_LOG0_MEM(...) -#define TU_LOG0_PTR(...) +#define TU_LOG0_BUF(...) #define TU_LOG0_INT(...) #define TU_LOG0_HEX(...) #ifndef TU_LOG1 #define TU_LOG1(...) #define TU_LOG1_MEM(...) - #define TU_LOG1_PTR(...) + #define TU_LOG1_BUF(...) #define TU_LOG1_INT(...) #define TU_LOG1_HEX(...) #endif @@ -159,7 +150,7 @@ static inline const char* tu_lookup_find(tu_lookup_table_t const* p_table, uint3 #ifndef TU_LOG2 #define TU_LOG2(...) #define TU_LOG2_MEM(...) - #define TU_LOG2_PTR(...) + #define TU_LOG2_BUF(...) #define TU_LOG2_INT(...) #define TU_LOG2_HEX(...) #endif @@ -167,7 +158,7 @@ static inline const char* tu_lookup_find(tu_lookup_table_t const* p_table, uint3 #ifndef TU_LOG3 #define TU_LOG3(...) #define TU_LOG3_MEM(...) - #define TU_LOG3_PTR(...) + #define TU_LOG3_BUF(...) #define TU_LOG3_INT(...) #define TU_LOG3_HEX(...) #endif diff --git a/src/common/tusb_mcu.h b/src/common/tusb_mcu.h index 35f94efbc..8807ff8aa 100644 --- a/src/common/tusb_mcu.h +++ b/src/common/tusb_mcu.h @@ -385,6 +385,18 @@ #define TUP_RHPORT_HIGHSPEED 1 #endif + +//--------------------------------------------------------------------+ +// External USB controller +//--------------------------------------------------------------------+ + +#if defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421 + #ifndef CFG_TUH_MAX3421_ENDPOINT_TOTAL + #define CFG_TUH_MAX3421_ENDPOINT_TOTAL (8 + 4*(CFG_TUH_DEVICE_MAX-1)) + #endif +#endif + + //--------------------------------------------------------------------+ // Default Values //--------------------------------------------------------------------+ diff --git a/src/common/tusb_timeout.h b/src/common/tusb_timeout.h deleted file mode 100644 index 533e67ab8..000000000 --- a/src/common/tusb_timeout.h +++ /dev/null @@ -1,80 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -/** \ingroup Group_Common Common Files - * \defgroup Group_TimeoutTimer timeout timer - * @{ */ - -#ifndef _TUSB_TIMEOUT_H_ -#define _TUSB_TIMEOUT_H_ - -#include <stdbool.h> -#include <stdint.h> - -#ifdef __cplusplus -extern "C" { -#endif - -typedef struct { - uint32_t start; - uint32_t interval; -}tu_timeout_t; - -#if 0 - -extern uint32_t tusb_hal_millis(void); - -static inline void tu_timeout_set(tu_timeout_t* tt, uint32_t msec) -{ - tt->interval = msec; - tt->start = tusb_hal_millis(); -} - -static inline bool tu_timeout_expired(tu_timeout_t* tt) -{ - return ( tusb_hal_millis() - tt->start ) >= tt->interval; -} - -// For used with periodic event to prevent drift -static inline void tu_timeout_reset(tu_timeout_t* tt) -{ - tt->start += tt->interval; -} - -static inline void tu_timeout_restart(tu_timeout_t* tt) -{ - tt->start = tusb_hal_millis(); -} - -#endif - -#ifdef __cplusplus - } -#endif - -#endif /* _TUSB_TIMEOUT_H_ */ - -/** @} */ diff --git a/src/common/tusb_verify.h b/src/common/tusb_verify.h index 12355e8be..1b5f53dfc 100644 --- a/src/common/tusb_verify.h +++ b/src/common/tusb_verify.h @@ -56,12 +56,8 @@ * #define TU_VERIFY(cond) if(cond) return false; * #define TU_VERIFY(cond,ret) if(cond) return ret; * - * #define TU_VERIFY_HDLR(cond,handler) if(cond) {handler; return false;} - * #define TU_VERIFY_HDLR(cond,ret,handler) if(cond) {handler; return ret;} - * * #define TU_ASSERT(cond) if(cond) {_MESS_FAILED(); TU_BREAKPOINT(), return false;} * #define TU_ASSERT(cond,ret) if(cond) {_MESS_FAILED(); TU_BREAKPOINT(), return ret;} - * *------------------------------------------------------------------*/ #ifdef __cplusplus @@ -97,40 +93,23 @@ #define TU_BREAKPOINT() do {} while (0) #endif -/*------------------------------------------------------------------*/ -/* Macro Generator - *------------------------------------------------------------------*/ - // Helper to implement optional parameter for TU_VERIFY Macro family #define _GET_3RD_ARG(arg1, arg2, arg3, ...) arg3 -#define _GET_4TH_ARG(arg1, arg2, arg3, arg4, ...) arg4 - -/*------------- Generator for TU_VERIFY and TU_VERIFY_HDLR -------------*/ -#define TU_VERIFY_DEFINE(_cond, _handler, _ret) do \ -{ \ - if ( !(_cond) ) { _handler; return _ret; } \ -} while(0) /*------------------------------------------------------------------*/ /* TU_VERIFY * - TU_VERIFY_1ARGS : return false if failed * - TU_VERIFY_2ARGS : return provided value if failed *------------------------------------------------------------------*/ -#define TU_VERIFY_1ARGS(_cond) TU_VERIFY_DEFINE(_cond, , false) -#define TU_VERIFY_2ARGS(_cond, _ret) TU_VERIFY_DEFINE(_cond, , _ret) +#define TU_VERIFY_DEFINE(_cond, _ret) \ + do { \ + if ( !(_cond) ) { return _ret; } \ + } while(0) -#define TU_VERIFY(...) _GET_3RD_ARG(__VA_ARGS__, TU_VERIFY_2ARGS, TU_VERIFY_1ARGS, UNUSED)(__VA_ARGS__) +#define TU_VERIFY_1ARGS(_cond) TU_VERIFY_DEFINE(_cond, false) +#define TU_VERIFY_2ARGS(_cond, _ret) TU_VERIFY_DEFINE(_cond, _ret) - -/*------------------------------------------------------------------*/ -/* TU_VERIFY WITH HANDLER - * - TU_VERIFY_HDLR_2ARGS : execute handler, return false if failed - * - TU_VERIFY_HDLR_3ARGS : execute handler, return provided error if failed - *------------------------------------------------------------------*/ -#define TU_VERIFY_HDLR_2ARGS(_cond, _handler) TU_VERIFY_DEFINE(_cond, _handler, false) -#define TU_VERIFY_HDLR_3ARGS(_cond, _handler, _ret) TU_VERIFY_DEFINE(_cond, _handler, _ret) - -#define TU_VERIFY_HDLR(...) _GET_4TH_ARG(__VA_ARGS__, TU_VERIFY_HDLR_3ARGS, TU_VERIFY_HDLR_2ARGS,UNUSED)(__VA_ARGS__) +#define TU_VERIFY(...) _GET_3RD_ARG(__VA_ARGS__, TU_VERIFY_2ARGS, TU_VERIFY_1ARGS, _dummy)(__VA_ARGS__) /*------------------------------------------------------------------*/ /* ASSERT @@ -138,19 +117,20 @@ * - 1 arg : return false if failed * - 2 arg : return error if failed *------------------------------------------------------------------*/ -#define ASSERT_1ARGS(_cond) TU_VERIFY_DEFINE(_cond, _MESS_FAILED(); TU_BREAKPOINT(), false) -#define ASSERT_2ARGS(_cond, _ret) TU_VERIFY_DEFINE(_cond, _MESS_FAILED(); TU_BREAKPOINT(), _ret) +#define TU_ASSERT_DEFINE(_cond, _ret) \ + do { \ + if ( !(_cond) ) { _MESS_FAILED(); TU_BREAKPOINT(); return _ret; } \ + } while(0) + +#define TU_ASSERT_1ARGS(_cond) TU_ASSERT_DEFINE(_cond, false) +#define TU_ASSERT_2ARGS(_cond, _ret) TU_ASSERT_DEFINE(_cond, _ret) #ifndef TU_ASSERT -#define TU_ASSERT(...) _GET_3RD_ARG(__VA_ARGS__, ASSERT_2ARGS, ASSERT_1ARGS,UNUSED)(__VA_ARGS__) +#define TU_ASSERT(...) _GET_3RD_ARG(__VA_ARGS__, TU_ASSERT_2ARGS, TU_ASSERT_1ARGS, _dummy)(__VA_ARGS__) #endif -/*------------------------------------------------------------------*/ -/* ASSERT HDLR - *------------------------------------------------------------------*/ - #ifdef __cplusplus } #endif -#endif /* TUSB_VERIFY_H_ */ +#endif diff --git a/src/device/usbd.c b/src/device/usbd.c index f0d9fba52..50941c46f 100644 --- a/src/device/usbd.c +++ b/src/device/usbd.c @@ -506,7 +506,7 @@ void tud_task_ext(uint32_t timeout_ms, bool in_isr) break; case DCD_EVENT_SETUP_RECEIVED: - TU_LOG_PTR(CFG_TUD_LOG_LEVEL, &event.setup_received); + TU_LOG_BUF(CFG_TUD_LOG_LEVEL, &event.setup_received, 8); TU_LOG_USBD("\r\n"); // Mark as connected after receiving 1st setup packet. diff --git a/src/device/usbd.h b/src/device/usbd.h index b11c1a09d..782f538fd 100644 --- a/src/device/usbd.h +++ b/src/device/usbd.h @@ -50,8 +50,7 @@ void tud_task_ext(uint32_t timeout_ms, bool in_isr); // Task function should be called in main/rtos loop TU_ATTR_ALWAYS_INLINE static inline -void tud_task (void) -{ +void tud_task (void) { tud_task_ext(UINT32_MAX, false); } @@ -80,8 +79,7 @@ bool tud_suspended(void); // Check if device is ready to transfer TU_ATTR_ALWAYS_INLINE static inline -bool tud_ready(void) -{ +bool tud_ready(void) { return tud_mounted() && !tud_suspended(); } diff --git a/src/device/usbd_pvt.h b/src/device/usbd_pvt.h index 16585167f..153be7cee 100644 --- a/src/device/usbd_pvt.h +++ b/src/device/usbd_pvt.h @@ -23,8 +23,8 @@ * * This file is part of the TinyUSB stack. */ -#ifndef USBD_PVT_H_ -#define USBD_PVT_H_ +#ifndef _TUSB_USBD_PVT_H_ +#define _TUSB_USBD_PVT_H_ #include "osal/osal.h" #include "common/tusb_fifo.h" @@ -44,8 +44,7 @@ // Class Driver API //--------------------------------------------------------------------+ -typedef struct -{ +typedef struct { #if CFG_TUSB_DEBUG >= CFG_TUD_LOG_LEVEL char const* name; #endif @@ -111,8 +110,7 @@ bool usbd_edpt_iso_activate(uint8_t rhport, tusb_desc_endpoint_t const * p_endp // Check if endpoint is ready (not busy and not stalled) TU_ATTR_ALWAYS_INLINE static inline -bool usbd_edpt_ready(uint8_t rhport, uint8_t ep_addr) -{ +bool usbd_edpt_ready(uint8_t rhport, uint8_t ep_addr) { return !usbd_edpt_busy(rhport, ep_addr) && !usbd_edpt_stalled(rhport, ep_addr); } @@ -124,11 +122,10 @@ void usbd_sof_enable(uint8_t rhport, bool en); *------------------------------------------------------------------*/ bool usbd_open_edpt_pair(uint8_t rhport, uint8_t const* p_desc, uint8_t ep_count, uint8_t xfer_type, uint8_t* ep_out, uint8_t* ep_in); -void usbd_defer_func( osal_task_func_t func, void* param, bool in_isr ); - +void usbd_defer_func(osal_task_func_t func, void *param, bool in_isr); #ifdef __cplusplus } #endif -#endif /* USBD_PVT_H_ */ +#endif diff --git a/src/host/hcd.h b/src/host/hcd.h index 9bcc1c6df..2bde289df 100644 --- a/src/host/hcd.h +++ b/src/host/hcd.h @@ -39,7 +39,7 @@ // Configuration //--------------------------------------------------------------------+ -// Max number of endpoints per device +// Max number of endpoints pair per device // TODO optimize memory usage #ifndef CFG_TUH_ENDPOINT_MAX #define CFG_TUH_ENDPOINT_MAX 16 @@ -131,7 +131,7 @@ bool hcd_configure(uint8_t rhport, uint32_t cfg_id, const void* cfg_param) TU_AT bool hcd_init(uint8_t rhport); // Interrupt Handler -void hcd_int_handler(uint8_t rhport); +void hcd_int_handler(uint8_t rhport, bool in_isr); // Enable USB interrupt void hcd_int_enable (uint8_t rhport); @@ -167,17 +167,17 @@ void hcd_device_close(uint8_t rhport, uint8_t dev_addr); //--------------------------------------------------------------------+ // Open an endpoint -bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const * ep_desc); +bool hcd_edpt_open(uint8_t rhport, uint8_t daddr, tusb_desc_endpoint_t const * ep_desc); // Submit a transfer, when complete hcd_event_xfer_complete() must be invoked -bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t * buffer, uint16_t buflen); +bool hcd_edpt_xfer(uint8_t rhport, uint8_t daddr, uint8_t ep_addr, uint8_t * buffer, uint16_t buflen); // Abort a queued transfer. Note: it can only abort transfer that has not been started // Return true if a queued transfer is aborted, false if there is no transfer to abort bool hcd_edpt_abort_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr); // Submit a special transfer to send 8-byte Setup Packet, when complete hcd_event_xfer_complete() must be invoked -bool hcd_setup_send(uint8_t rhport, uint8_t dev_addr, uint8_t const setup_packet[8]); +bool hcd_setup_send(uint8_t rhport, uint8_t daddr, uint8_t const setup_packet[8]); // clear stall, data toggle is also reset to DATA0 bool hcd_edpt_clear_stall(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr); @@ -198,8 +198,7 @@ extern void hcd_event_handler(hcd_event_t const* event, bool in_isr); // Helper to send device attach event TU_ATTR_ALWAYS_INLINE static inline -void hcd_event_device_attach(uint8_t rhport, bool in_isr) -{ +void hcd_event_device_attach(uint8_t rhport, bool in_isr) { hcd_event_t event; event.rhport = rhport; event.event_id = HCD_EVENT_DEVICE_ATTACH; @@ -211,8 +210,7 @@ void hcd_event_device_attach(uint8_t rhport, bool in_isr) // Helper to send device removal event TU_ATTR_ALWAYS_INLINE static inline -void hcd_event_device_remove(uint8_t rhport, bool in_isr) -{ +void hcd_event_device_remove(uint8_t rhport, bool in_isr) { hcd_event_t event; event.rhport = rhport; event.event_id = HCD_EVENT_DEVICE_REMOVE; @@ -224,10 +222,8 @@ void hcd_event_device_remove(uint8_t rhport, bool in_isr) // Helper to send USB transfer event TU_ATTR_ALWAYS_INLINE static inline -void hcd_event_xfer_complete(uint8_t dev_addr, uint8_t ep_addr, uint32_t xferred_bytes, xfer_result_t result, bool in_isr) -{ - hcd_event_t event = - { +void hcd_event_xfer_complete(uint8_t dev_addr, uint8_t ep_addr, uint32_t xferred_bytes, xfer_result_t result, bool in_isr) { + hcd_event_t event = { .rhport = 0, // TODO correct rhport .event_id = HCD_EVENT_XFER_COMPLETE, .dev_addr = dev_addr, diff --git a/src/host/usbh.c b/src/host/usbh.c index 5423df669..8d75c9726 100644 --- a/src/host/usbh.c +++ b/src/host/usbh.c @@ -552,8 +552,7 @@ static void _control_blocking_complete_cb(tuh_xfer_t* xfer) } // TODO timeout_ms is not supported yet -bool tuh_control_xfer (tuh_xfer_t* xfer) -{ +bool tuh_control_xfer (tuh_xfer_t* xfer) { // EP0 with setup packet TU_VERIFY(xfer->ep_addr == 0 && xfer->setup); @@ -565,8 +564,7 @@ bool tuh_control_xfer (tuh_xfer_t* xfer) (void) osal_mutex_lock(_usbh_mutex, OSAL_TIMEOUT_WAIT_FOREVER); bool const is_idle = (_ctrl_xfer.stage == CONTROL_STAGE_IDLE); - if (is_idle) - { + if (is_idle) { _ctrl_xfer.stage = CONTROL_STAGE_SETUP; _ctrl_xfer.daddr = daddr; _ctrl_xfer.actual_len = 0; @@ -585,14 +583,12 @@ bool tuh_control_xfer (tuh_xfer_t* xfer) TU_LOG_USBH("[%u:%u] %s: ", rhport, daddr, (xfer->setup->bmRequestType_bit.type == TUSB_REQ_TYPE_STANDARD && xfer->setup->bRequest <= TUSB_REQ_SYNCH_FRAME) ? tu_str_std_request[xfer->setup->bRequest] : "Class Request"); - TU_LOG_PTR(CFG_TUH_LOG_LEVEL, xfer->setup); + TU_LOG_BUF(CFG_TUH_LOG_LEVEL, xfer->setup, 8); TU_LOG_USBH("\r\n"); - if (xfer->complete_cb) - { + if (xfer->complete_cb) { TU_ASSERT( hcd_setup_send(rhport, daddr, (uint8_t const*) &_ctrl_xfer.request) ); - }else - { + }else { // blocking if complete callback is not provided // change callback to internal blocking, and result as user argument volatile xfer_result_t result = XFER_RESULT_INVALID; @@ -656,30 +652,23 @@ static void _xfer_complete(uint8_t daddr, xfer_result_t result) } } -static bool usbh_control_xfer_cb (uint8_t dev_addr, uint8_t ep_addr, xfer_result_t result, uint32_t xferred_bytes) -{ +static bool usbh_control_xfer_cb (uint8_t dev_addr, uint8_t ep_addr, xfer_result_t result, uint32_t xferred_bytes) { (void) ep_addr; const uint8_t rhport = usbh_get_rhport(dev_addr); tusb_control_request_t const * request = &_ctrl_xfer.request; - if (XFER_RESULT_SUCCESS != result) - { + if (XFER_RESULT_SUCCESS != result) { TU_LOG1("[%u:%u] Control %s, xferred_bytes = %lu\r\n", rhport, dev_addr, result == XFER_RESULT_STALLED ? "STALLED" : "FAILED", xferred_bytes); - #if CFG_TUSB_DEBUG == 1 - TU_LOG1_PTR(request); + TU_LOG1_BUF(request, 8); TU_LOG1("\r\n"); - #endif // terminate transfer if any stage failed _xfer_complete(dev_addr, result); - }else - { - switch(_ctrl_xfer.stage) - { + }else { + switch(_ctrl_xfer.stage) { case CONTROL_STAGE_SETUP: - if (request->wLength) - { + if (request->wLength) { // DATA stage: initial data toggle is always 1 _set_control_xfer_stage(CONTROL_STAGE_DATA); TU_ASSERT( hcd_edpt_xfer(rhport, dev_addr, tu_edpt_addr(0, request->bmRequestType_bit.direction), _ctrl_xfer.buffer, request->wLength) ); @@ -688,8 +677,7 @@ static bool usbh_control_xfer_cb (uint8_t dev_addr, uint8_t ep_addr, xfer_result TU_ATTR_FALLTHROUGH; case CONTROL_STAGE_DATA: - if (request->wLength) - { + if (request->wLength) { TU_LOG_USBH("[%u:%u] Control data:\r\n", rhport, dev_addr); TU_LOG_MEM(CFG_TUH_LOG_LEVEL, _ctrl_xfer.buffer, xferred_bytes, 2); } @@ -765,29 +753,33 @@ bool tuh_edpt_abort_xfer(uint8_t daddr, uint8_t ep_addr) { // USBH API For Class Driver //--------------------------------------------------------------------+ -uint8_t usbh_get_rhport(uint8_t dev_addr) -{ - usbh_device_t* dev = get_device(dev_addr); +uint8_t usbh_get_rhport(uint8_t dev_addr) { + usbh_device_t *dev = get_device(dev_addr); return dev ? dev->rhport : _dev0.rhport; } -uint8_t* usbh_get_enum_buf(void) -{ +uint8_t *usbh_get_enum_buf(void) { return _usbh_ctrl_buf; } -void usbh_int_set(bool enabled) -{ +void usbh_int_set(bool enabled) { // TODO all host controller if multiple are used since they shared the same event queue - if (enabled) - { + if (enabled) { hcd_int_enable(_usbh_controller); - }else - { + } else { hcd_int_disable(_usbh_controller); } } +void usbh_defer_func(osal_task_func_t func, void *param, bool in_isr) { + hcd_event_t event = { 0 }; + event.event_id = USBH_EVENT_FUNC_CALL; + event.func_call.func = func; + event.func_call.param = param; + + osal_queue_send(_usbh_q, &event, in_isr); +} + //--------------------------------------------------------------------+ // Endpoint API //--------------------------------------------------------------------+ @@ -825,6 +817,7 @@ bool usbh_edpt_release(uint8_t dev_addr, uint8_t ep_addr) } // Submit an transfer +// TODO call usbh_edpt_release if failed bool usbh_edpt_xfer_with_callback(uint8_t dev_addr, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes, tuh_xfer_cb_t complete_cb, uintptr_t user_data) { @@ -862,7 +855,7 @@ bool usbh_edpt_xfer_with_callback(uint8_t dev_addr, uint8_t ep_addr, uint8_t * b ep_state->busy = 0; ep_state->claimed = 0; TU_LOG1("Failed\r\n"); - TU_BREAKPOINT(); +// TU_BREAKPOINT(); return false; } } @@ -929,6 +922,7 @@ TU_ATTR_FAST_FUNC void hcd_event_handler(hcd_event_t const* event, bool in_isr) switch (event->event_id) { // case HCD_EVENT_DEVICE_REMOVE: +// // FIXME device remove from a hub need an HCD API for hcd to free up endpoint // // mark device as removing to prevent further xfer before the event is processed in usbh task // break; @@ -1538,9 +1532,7 @@ static bool enum_new_device(hcd_event_t* event) xfer.result = XFER_RESULT_SUCCESS; xfer.user_data = ENUM_ADDR0_DEVICE_DESC; - process_enumeration(&xfer); - } #if CFG_TUH_HUB else @@ -1722,19 +1714,16 @@ static bool _parse_configuration_descriptor(uint8_t dev_addr, tusb_desc_configur return true; } -void usbh_driver_set_config_complete(uint8_t dev_addr, uint8_t itf_num) -{ +void usbh_driver_set_config_complete(uint8_t dev_addr, uint8_t itf_num) { usbh_device_t* dev = get_device(dev_addr); - for(itf_num++; itf_num < CFG_TUH_INTERFACE_MAX; itf_num++) - { + for(itf_num++; itf_num < CFG_TUH_INTERFACE_MAX; itf_num++) { // continue with next valid interface // IAD binding interface such as CDCs should return itf_num + 1 when complete // with usbh_driver_set_config_complete() uint8_t const drv_id = dev->itf2drv[itf_num]; usbh_class_driver_t const * driver = get_driver(drv_id); - if (driver) - { + if (driver) { TU_LOG_USBH("%s set config: itf = %u\r\n", driver->name, itf_num); driver->set_config(dev_addr, itf_num); break; @@ -1742,23 +1731,19 @@ void usbh_driver_set_config_complete(uint8_t dev_addr, uint8_t itf_num) } // all interface are configured - if (itf_num == CFG_TUH_INTERFACE_MAX) - { + if (itf_num == CFG_TUH_INTERFACE_MAX) { enum_full_complete(); - if (is_hub_addr(dev_addr)) - { + if (is_hub_addr(dev_addr)) { TU_LOG(CFG_TUH_LOG_LEVEL, "HUB address = %u is mounted\r\n", dev_addr); - }else - { + }else { // Invoke callback if available if (tuh_mount_cb) tuh_mount_cb(dev_addr); } } } -static void enum_full_complete(void) -{ +static void enum_full_complete(void) { // mark enumeration as complete _dev0.enumerating = 0; diff --git a/src/host/usbh.h b/src/host/usbh.h index 684e8240e..770d70dfe 100644 --- a/src/host/usbh.h +++ b/src/host/usbh.h @@ -124,11 +124,16 @@ void tuh_task(void) { bool tuh_task_event_ready(void); #ifndef _TUSB_HCD_H_ -extern void hcd_int_handler(uint8_t rhport); +extern void hcd_int_handler(uint8_t rhport, bool in_isr); #endif -// Interrupt handler, name alias to HCD -#define tuh_int_handler hcd_int_handler +// Interrupt handler alias to HCD with in_isr as optional parameter +// - tuh_int_handler(rhport) --> hcd_int_handler(rhport, true) +// - tuh_int_handler(rhport, in_isr) --> hcd_int_handler(rhport, in_isr) +// Note: this is similar to TU_VERIFY(), _GET_3RD_ARG() is defined in tusb_verify.h +#define _tuh_int_handler_1arg(_rhport) hcd_int_handler(_rhport, true) +#define _tuh_int_hanlder_2arg(_rhport, _in_isr) hcd_int_handler(_rhport, _in_isr) +#define tuh_int_handler(...) _GET_3RD_ARG(__VA_ARGS__, _tuh_int_hanlder_2arg, _tuh_int_handler_1arg, _dummy)(__VA_ARGS__) // Check if roothub port is initialized and active as a host bool tuh_rhport_is_active(uint8_t rhport); diff --git a/src/host/usbh_pvt.h b/src/host/usbh_pvt.h index 0b58a91bc..2b61a77db 100644 --- a/src/host/usbh_pvt.h +++ b/src/host/usbh_pvt.h @@ -24,8 +24,8 @@ * This file is part of the TinyUSB stack. */ -#ifndef _TUSB_USBH_CLASSDRIVER_H_ -#define _TUSB_USBH_CLASSDRIVER_H_ +#ifndef _TUSB_USBH_PVT_H_ +#define _TUSB_USBH_PVT_H_ #include "osal/osal.h" #include "common/tusb_fifo.h" @@ -76,6 +76,8 @@ uint8_t* usbh_get_enum_buf(void); void usbh_int_set(bool enabled); +void usbh_defer_func(osal_task_func_t func, void *param, bool in_isr); + //--------------------------------------------------------------------+ // USBH Endpoint API //--------------------------------------------------------------------+ @@ -85,12 +87,10 @@ bool usbh_edpt_xfer_with_callback(uint8_t dev_addr, uint8_t ep_addr, uint8_t * b tuh_xfer_cb_t complete_cb, uintptr_t user_data); TU_ATTR_ALWAYS_INLINE -static inline bool usbh_edpt_xfer(uint8_t dev_addr, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes) -{ +static inline bool usbh_edpt_xfer(uint8_t dev_addr, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes) { return usbh_edpt_xfer_with_callback(dev_addr, ep_addr, buffer, total_bytes, NULL, 0); } - // Claim an endpoint before submitting a transfer. // If caller does not make any transfer, it must release endpoint for others. bool usbh_edpt_claim(uint8_t dev_addr, uint8_t ep_addr); diff --git a/src/portable/analog/max3421/hcd_max3421.c b/src/portable/analog/max3421/hcd_max3421.c new file mode 100644 index 000000000..787c1e511 --- /dev/null +++ b/src/portable/analog/max3421/hcd_max3421.c @@ -0,0 +1,924 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2023 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "tusb_option.h" + +#if CFG_TUH_ENABLED && defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421 + +#include <stdatomic.h> +#include "host/hcd.h" + +//--------------------------------------------------------------------+ +// +//--------------------------------------------------------------------+ + +// Command format is +// Reg [7:3] | 0 [2] | Dir [1] | Ack [0] + +enum { + CMDBYTE_WRITE = 0x02, +}; + +enum { + RCVVFIFO_ADDR = 1u << 3, // 0x08 + SNDFIFO_ADDR = 2u << 3, // 0x10 + SUDFIFO_ADDR = 4u << 3, // 0x20 + RCVBC_ADDR = 6u << 3, // 0x30 + SNDBC_ADDR = 7u << 3, // 0x38 + USBIRQ_ADDR = 13u << 3, // 0x68 + USBIEN_ADDR = 14u << 3, // 0x70 + USBCTL_ADDR = 15u << 3, // 0x78 + CPUCTL_ADDR = 16u << 3, // 0x80 + PINCTL_ADDR = 17u << 3, // 0x88 + REVISION_ADDR = 18u << 3, // 0x90 + HIRQ_ADDR = 25u << 3, // 0xC8 + HIEN_ADDR = 26u << 3, // 0xD0 + MODE_ADDR = 27u << 3, // 0xD8 + PERADDR_ADDR = 28u << 3, // 0xE0 + HCTL_ADDR = 29u << 3, // 0xE8 + HXFR_ADDR = 30u << 3, // 0xF0 + HRSL_ADDR = 31u << 3, // 0xF8 +}; + +enum { + USBIRQ_OSCOK_IRQ = 1u << 0, + USBIRQ_NOVBUS_IRQ = 1u << 5, + USBIRQ_VBUS_IRQ = 1u << 6, +}; + +enum { + USBCTL_PWRDOWN = 1u << 4, + USBCTL_CHIPRES = 1u << 5, +}; + +enum { + CPUCTL_IE = 1u << 0, + CPUCTL_PULSEWID0 = 1u << 6, + CPUCTL_PULSEWID1 = 1u << 7, +}; + +enum { + PINCTL_GPXA = 1u << 0, + PINCTL_GPXB = 1u << 1, + PINCTL_POSINT = 1u << 2, + PINCTL_INTLEVEL = 1u << 3, + PINCTL_FDUPSPI = 1u << 4, +}; + +enum { + HIRQ_BUSEVENT_IRQ = 1u << 0, + HIRQ_RWU_IRQ = 1u << 1, + HIRQ_RCVDAV_IRQ = 1u << 2, + HIRQ_SNDBAV_IRQ = 1u << 3, + HIRQ_SUSDN_IRQ = 1u << 4, + HIRQ_CONDET_IRQ = 1u << 5, + HIRQ_FRAME_IRQ = 1u << 6, + HIRQ_HXFRDN_IRQ = 1u << 7, +}; + +enum { + MODE_HOST = 1u << 0, + MODE_LOWSPEED = 1u << 1, + MODE_HUBPRE = 1u << 2, + MODE_SOFKAENAB = 1u << 3, + MODE_SEPIRQ = 1u << 4, + MODE_DELAYISO = 1u << 5, + MODE_DMPULLDN = 1u << 6, + MODE_DPPULLDN = 1u << 7, +}; + +enum { + HCTL_BUSRST = 1u << 0, + HCTL_FRMRST = 1u << 1, + HCTL_SAMPLEBUS = 1u << 2, + HCTL_SIGRSM = 1u << 3, + HCTL_RCVTOG0 = 1u << 4, + HCTL_RCVTOG1 = 1u << 5, + HCTL_SNDTOG0 = 1u << 6, + HCTL_SNDTOG1 = 1u << 7, +}; + +enum { + HXFR_EPNUM_MASK = 0x0f, + HXFR_SETUP = 1u << 4, + HXFR_OUT_NIN = 1u << 5, + HXFR_ISO = 1u << 6, + HXFR_HS = 1u << 7, +}; + +enum { + HRSL_RESULT_MASK = 0x0f, + HRSL_RCVTOGRD = 1u << 4, + HRSL_SNDTOGRD = 1u << 5, + HRSL_KSTATUS = 1u << 6, + HRSL_JSTATUS = 1u << 7, +}; + +enum { + HRSL_SUCCESS = 0, + HRSL_BUSY, + HRSL_BAD_REQ, + HRSL_UNDEF, + HRSL_NAK, + HRSL_STALL, + HRSL_TOG_ERR, + HRSL_WRONG_PID, + HRSL_BAD_BYTECOUNT, + HRSL_PID_ERR, + HRSL_PKT_ERR, + HRSL_CRC_ERR, + HRSL_K_ERR, + HRSL_J_ERR, + HRSL_TIMEOUT, + HRSL_BABBLE, +}; + +enum { + DEFAULT_HIEN = HIRQ_CONDET_IRQ | HIRQ_FRAME_IRQ | HIRQ_HXFRDN_IRQ | HIRQ_RCVDAV_IRQ +}; + +//--------------------------------------------------------------------+ +// +//--------------------------------------------------------------------+ + +typedef struct { + struct TU_ATTR_PACKED { + uint8_t ep_dir : 1; + uint8_t is_iso : 1; + uint8_t is_setup : 1; + uint8_t data_toggle : 1; + uint8_t xfer_pending : 1; + uint8_t xfer_complete : 1; + }; + struct TU_ATTR_PACKED { + uint8_t daddr : 4; + uint8_t ep_num : 4; + }; + + uint16_t packet_size; + uint16_t total_len; + uint16_t xferred_len; + uint8_t* buf; +} max3421_ep_t; + +typedef struct { + // cached register + uint8_t sndbc; + uint8_t hirq; + uint8_t hien; + uint8_t mode; + uint8_t peraddr; + uint8_t hxfr; + + atomic_flag busy; // busy transferring + volatile uint16_t frame_count; + + max3421_ep_t ep[CFG_TUH_MAX3421_ENDPOINT_TOTAL]; // [0] is reserved for addr0 + + OSAL_MUTEX_DEF(spi_mutexdef); +#if OSAL_MUTEX_REQUIRED + osal_mutex_t spi_mutex; +#endif +} max3421_data_t; + +static max3421_data_t _hcd_data; + +//--------------------------------------------------------------------+ +// API: SPI transfer with MAX3421E, must be implemented by application +//--------------------------------------------------------------------+ + +// API to control MAX3421 SPI CS +extern void tuh_max3421_spi_cs_api(uint8_t rhport, bool active); + +// API to transfer data with MAX3421 SPI +// Either tx_buf or rx_buf can be NULL, which means transfer is write or read only +extern bool tuh_max3421_spi_xfer_api(uint8_t rhport, uint8_t const* tx_buf, uint8_t* rx_buf, size_t xfer_bytes); + +// API to enable/disable MAX3421 INTR pin interrupt +extern void tuh_max3421_int_api(uint8_t rhport, bool enabled); + +//--------------------------------------------------------------------+ +// SPI Helper +//--------------------------------------------------------------------+ +static void handle_connect_irq(uint8_t rhport, bool in_isr); +static inline void hirq_write(uint8_t rhport, uint8_t data, bool in_isr); + +static void max3421_spi_lock(uint8_t rhport, bool in_isr) { + // disable interrupt and mutex lock (for pre-emptive RTOS) if not in_isr + if (!in_isr) { + (void) osal_mutex_lock(_hcd_data.spi_mutex, OSAL_TIMEOUT_WAIT_FOREVER); + tuh_max3421_int_api(rhport, false); + } + + // assert CS + tuh_max3421_spi_cs_api(rhport, true); +} + +static void max3421_spi_unlock(uint8_t rhport, bool in_isr) { + // de-assert CS + tuh_max3421_spi_cs_api(rhport, false); + + // mutex unlock and re-enable interrupt + if (!in_isr) { + tuh_max3421_int_api(rhport, true); + (void) osal_mutex_unlock(_hcd_data.spi_mutex); + } +} + +static void fifo_write(uint8_t rhport, uint8_t reg, uint8_t const * buffer, uint16_t len, bool in_isr) { + uint8_t hirq; + reg |= CMDBYTE_WRITE; + + max3421_spi_lock(rhport, in_isr); + + tuh_max3421_spi_xfer_api(rhport, ®, &hirq, 1); + _hcd_data.hirq = hirq; + tuh_max3421_spi_xfer_api(rhport, buffer, NULL, len); + + max3421_spi_unlock(rhport, in_isr); + +} + +static void fifo_read(uint8_t rhport, uint8_t * buffer, uint16_t len, bool in_isr) { + uint8_t hirq; + uint8_t const reg = RCVVFIFO_ADDR; + + max3421_spi_lock(rhport, in_isr); + + tuh_max3421_spi_xfer_api(rhport, ®, &hirq, 1); + _hcd_data.hirq = hirq; + tuh_max3421_spi_xfer_api(rhport, NULL, buffer, len); + + max3421_spi_unlock(rhport, in_isr); +} + +static void reg_write(uint8_t rhport, uint8_t reg, uint8_t data, bool in_isr) { + uint8_t tx_buf[2] = {reg | CMDBYTE_WRITE, data}; + uint8_t rx_buf[2] = {0, 0}; + + max3421_spi_lock(rhport, in_isr); + + tuh_max3421_spi_xfer_api(rhport, tx_buf, rx_buf, 2); + + max3421_spi_unlock(rhport, in_isr); + + // HIRQ register since we are in full-duplex mode + _hcd_data.hirq = rx_buf[0]; +} + +static uint8_t reg_read(uint8_t rhport, uint8_t reg, bool in_isr) { + uint8_t tx_buf[2] = {reg, 0}; + uint8_t rx_buf[2] = {0, 0}; + + max3421_spi_lock(rhport, in_isr); + + bool ret = tuh_max3421_spi_xfer_api(rhport, tx_buf, rx_buf, 2); + + max3421_spi_unlock(rhport, in_isr); + + _hcd_data.hirq = rx_buf[0]; + return ret ? rx_buf[1] : 0; +} + +static inline void hirq_write(uint8_t rhport, uint8_t data, bool in_isr) { + reg_write(rhport, HIRQ_ADDR, data, in_isr); + // HIRQ write 1 is clear + _hcd_data.hirq &= ~data; +} + +static inline void hien_write(uint8_t rhport, uint8_t data, bool in_isr) { + _hcd_data.hien = data; + reg_write(rhport, HIEN_ADDR, data, in_isr); +} + +static inline void mode_write(uint8_t rhport, uint8_t data, bool in_isr) { + _hcd_data.mode = data; + reg_write(rhport, MODE_ADDR, data, in_isr); +} + +static inline void peraddr_write(uint8_t rhport, uint8_t data, bool in_isr) { + if ( _hcd_data.peraddr == data ) return; // no need to change address + + _hcd_data.peraddr = data; + reg_write(rhport, PERADDR_ADDR, data, in_isr); +} + +static inline void hxfr_write(uint8_t rhport, uint8_t data, bool in_isr) { + _hcd_data.hxfr = data; + reg_write(rhport, HXFR_ADDR, data, in_isr); +} + +static inline void sndbc_write(uint8_t rhport, uint8_t data, bool in_isr) { + _hcd_data.sndbc = data; + reg_write(rhport, SNDBC_ADDR, data, in_isr); +} + +//--------------------------------------------------------------------+ +// Endpoint helper +//--------------------------------------------------------------------+ + +static max3421_ep_t* find_ep_not_addr0(uint8_t daddr, uint8_t ep_num, uint8_t ep_dir) { + for(size_t i=1; i<CFG_TUH_MAX3421_ENDPOINT_TOTAL; i++) { + max3421_ep_t* ep = &_hcd_data.ep[i]; + // for control endpoint, skip direction check + if (daddr == ep->daddr && ep_num == ep->ep_num && (ep_dir == ep->ep_dir || ep_num == 0)) { + return ep; + } + } + + return NULL; +} + +// daddr = 0 and ep_num = 0 means find a free (allocate) endpoint +TU_ATTR_ALWAYS_INLINE static inline max3421_ep_t * allocate_ep(void) { + return find_ep_not_addr0(0, 0, 0); +} + +TU_ATTR_ALWAYS_INLINE static inline max3421_ep_t * find_opened_ep(uint8_t daddr, uint8_t ep_num, uint8_t ep_dir) { + if (daddr == 0 && ep_num == 0) { + return &_hcd_data.ep[0]; + }else{ + return find_ep_not_addr0(daddr, ep_num, ep_dir); + } +} + +// free all endpoints belong to device address +static void free_ep(uint8_t daddr) { + for (size_t i=1; i<CFG_TUH_MAX3421_ENDPOINT_TOTAL; i++) { + max3421_ep_t* ep = &_hcd_data.ep[i]; + if (ep->daddr == daddr) { + tu_memclr(ep, sizeof(max3421_ep_t)); + } + } +} + +static max3421_ep_t * find_next_pending_ep(max3421_ep_t * cur_ep) { + size_t const idx = cur_ep - _hcd_data.ep; + + // starting from next endpoint + for (size_t i = idx + 1; i < CFG_TUH_MAX3421_ENDPOINT_TOTAL; i++) { + max3421_ep_t* ep = &_hcd_data.ep[i]; + if (ep->xfer_pending && ep->packet_size) { +// TU_LOG3("next pending i = %u\n", i); + return ep; + } + } + + // wrap around including current endpoint + for (size_t i = 0; i <= idx; i++) { + max3421_ep_t* ep = &_hcd_data.ep[i]; + if (ep->xfer_pending && ep->packet_size) { +// TU_LOG3("next pending i = %u\n", i); + return ep; + } + } + + return NULL; +} + +//--------------------------------------------------------------------+ +// Controller API +//--------------------------------------------------------------------+ + +// optional hcd configuration, called by tuh_configure() +bool hcd_configure(uint8_t rhport, uint32_t cfg_id, const void* cfg_param) { + (void) rhport; + (void) cfg_id; + (void) cfg_param; + + return false; +} + +// Initialize controller to host mode +bool hcd_init(uint8_t rhport) { + (void) rhport; + + tuh_max3421_int_api(rhport, false); + tuh_max3421_spi_cs_api(rhport, false); + + TU_LOG2_INT(sizeof(max3421_ep_t)); + TU_LOG2_INT(sizeof(max3421_data_t)); + + tu_memclr(&_hcd_data, sizeof(_hcd_data)); + _hcd_data.peraddr = 0xff; // invalid + +#if OSAL_MUTEX_REQUIRED + _hcd_data.spi_mutex = osal_mutex_create(&_hcd_data.spi_mutexdef); +#endif + + // full duplex, interrupt negative edge + reg_write(rhport, PINCTL_ADDR, PINCTL_FDUPSPI, false); + + // V1 is 0x01, V2 is 0x12, V3 is 0x13 +// uint8_t const revision = reg_read(rhport, REVISION_ADDR, false); +// TU_LOG2_HEX(revision); + + // reset + reg_write(rhport, USBCTL_ADDR, USBCTL_CHIPRES, false); + reg_write(rhport, USBCTL_ADDR, 0, false); + while( !(reg_read(rhport, USBIRQ_ADDR, false) & USBIRQ_OSCOK_IRQ) ) { + // wait for oscillator to stabilize + } + + // Mode: Host and DP/DM pull down + mode_write(rhport, MODE_DPPULLDN | MODE_DMPULLDN | MODE_HOST, false); + + // frame reset & bus reset, this will trigger CONDET IRQ if device is already connected + reg_write(rhport, HCTL_ADDR, HCTL_BUSRST | HCTL_FRMRST, false); + + // clear all previously pending IRQ + hirq_write(rhport, 0xff, false); + + // Enable IRQ + hien_write(rhport, DEFAULT_HIEN, false); + + tuh_max3421_int_api(rhport, true); + + // Enable Interrupt pin + reg_write(rhport, CPUCTL_ADDR, CPUCTL_IE, false); + + return true; +} + +// Enable USB interrupt +// Not actually enable GPIO interrupt, just set variable to prevent handler to process +void hcd_int_enable (uint8_t rhport) { + tuh_max3421_int_api(rhport, true); +} + +// Disable USB interrupt +// Not actually disable GPIO interrupt, just set variable to prevent handler to process +void hcd_int_disable(uint8_t rhport) { + tuh_max3421_int_api(rhport, false); +} + +// Get frame number (1ms) +uint32_t hcd_frame_number(uint8_t rhport) { + (void) rhport; + return (uint32_t ) _hcd_data.frame_count; +} + +//--------------------------------------------------------------------+ +// Port API +//--------------------------------------------------------------------+ + +// Get the current connect status of roothub port +bool hcd_port_connect_status(uint8_t rhport) { + (void) rhport; + return (_hcd_data.mode & MODE_SOFKAENAB) ? true : false; +} + +// Reset USB bus on the port. Return immediately, bus reset sequence may not be complete. +// Some port would require hcd_port_reset_end() to be invoked after 10ms to complete the reset sequence. +void hcd_port_reset(uint8_t rhport) { + reg_write(rhport, HCTL_ADDR, HCTL_BUSRST, false); +} + +// Complete bus reset sequence, may be required by some controllers +void hcd_port_reset_end(uint8_t rhport) { + reg_write(rhport, HCTL_ADDR, 0, false); +} + +// Get port link speed +tusb_speed_t hcd_port_speed_get(uint8_t rhport) { + (void) rhport; + return (_hcd_data.mode & MODE_LOWSPEED) ? TUSB_SPEED_LOW : TUSB_SPEED_FULL; +} + +// HCD closes all opened endpoints belong to this device +void hcd_device_close(uint8_t rhport, uint8_t dev_addr) { + (void) rhport; + (void) dev_addr; +} + +//--------------------------------------------------------------------+ +// Endpoints API +//--------------------------------------------------------------------+ + +// Open an endpoint +bool hcd_edpt_open(uint8_t rhport, uint8_t daddr, tusb_desc_endpoint_t const * ep_desc) { + (void) rhport; + (void) daddr; + + uint8_t ep_num = tu_edpt_number(ep_desc->bEndpointAddress); + uint8_t ep_dir = tu_edpt_dir(ep_desc->bEndpointAddress); + + max3421_ep_t * ep; + if (daddr == 0 && ep_num == 0) { + ep = &_hcd_data.ep[0]; + }else { + ep = allocate_ep(); + TU_ASSERT(ep); + ep->daddr = daddr; + ep->ep_num = ep_num; + ep->ep_dir = ep_dir; + } + + if ( TUSB_XFER_ISOCHRONOUS == ep_desc->bmAttributes.xfer ) { + ep->is_iso = 1; + } + + ep->packet_size = tu_edpt_packet_size(ep_desc); + + return true; +} + +void xact_out(uint8_t rhport, max3421_ep_t *ep, bool switch_ep, bool in_isr) { + // Page 12: Programming BULK-OUT Transfers + // TODO double buffered + if (switch_ep) { + peraddr_write(rhport, ep->daddr, in_isr); + + uint8_t const hctl = (ep->data_toggle ? HCTL_SNDTOG1 : HCTL_SNDTOG0); + reg_write(rhport, HCTL_ADDR, hctl, in_isr); + } + + uint8_t const xact_len = (uint8_t) tu_min16(ep->total_len - ep->xferred_len, ep->packet_size); + TU_ASSERT(_hcd_data.hirq & HIRQ_SNDBAV_IRQ,); + if (xact_len) { + fifo_write(rhport, SNDFIFO_ADDR, ep->buf, xact_len, in_isr); + } + sndbc_write(rhport, xact_len, in_isr); + + uint8_t hxfr = ep->ep_num | HXFR_OUT_NIN | (ep->is_iso ? HXFR_ISO : 0); + hxfr_write(rhport, hxfr, in_isr); +} + +void xact_in(uint8_t rhport, max3421_ep_t *ep, bool switch_ep, bool in_isr) { + // Page 13: Programming BULK-IN Transfers + if (switch_ep) { + peraddr_write(rhport, ep->daddr, in_isr); + + uint8_t const hctl = (ep->data_toggle ? HCTL_RCVTOG1 : HCTL_RCVTOG0); + reg_write(rhport, HCTL_ADDR, hctl, in_isr); + } + + uint8_t hxfr = ep->ep_num | (ep->is_iso ? HXFR_ISO : 0); + hxfr_write(rhport, hxfr, in_isr); +} + +TU_ATTR_ALWAYS_INLINE static inline void xact_inout(uint8_t rhport, max3421_ep_t *ep, bool switch_ep, bool in_isr) { + if (ep->ep_num == 0 ) { + // setup + if (ep->is_setup) { + peraddr_write(rhport, ep->daddr, in_isr); + fifo_write(rhport, SUDFIFO_ADDR, ep->buf, 8, in_isr); + hxfr_write(rhport, HXFR_SETUP, in_isr); + return; + } + + // status + if (ep->buf == NULL || ep->total_len == 0) { + uint8_t const hxfr = HXFR_HS | (ep->ep_dir ? 0 : HXFR_OUT_NIN); + peraddr_write(rhport, ep->daddr, in_isr); + hxfr_write(rhport, hxfr, in_isr); + return; + } + } + + if (ep->ep_dir) { + xact_in(rhport, ep, switch_ep, in_isr); + }else { + xact_out(rhport, ep, switch_ep, in_isr); + } +} + +// Submit a transfer, when complete hcd_event_xfer_complete() must be invoked +bool hcd_edpt_xfer(uint8_t rhport, uint8_t daddr, uint8_t ep_addr, uint8_t * buffer, uint16_t buflen) { + uint8_t const ep_num = tu_edpt_number(ep_addr); + uint8_t const ep_dir = tu_edpt_dir(ep_addr); + + max3421_ep_t* ep = find_opened_ep(daddr, ep_num, ep_dir); + TU_VERIFY(ep); + + // control transfer can switch direction + ep->ep_dir = ep_dir; + + ep->buf = buffer; + ep->total_len = buflen; + ep->xferred_len = 0; + ep->xfer_complete = 0; + ep->xfer_pending = 1; + + if ( ep_num == 0 ) { + ep->is_setup = 0; + ep->data_toggle = 1; + } + + // carry out transfer if not busy + if ( !atomic_flag_test_and_set(&_hcd_data.busy) ) { + xact_inout(rhport, ep, true, false); + } else { + return true; + } + + return true; +} + +// Abort a queued transfer. Note: it can only abort transfer that has not been started +// Return true if a queued transfer is aborted, false if there is no transfer to abort +bool hcd_edpt_abort_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { + (void) rhport; + (void) dev_addr; + (void) ep_addr; + + return false; +} + +// Submit a special transfer to send 8-byte Setup Packet, when complete hcd_event_xfer_complete() must be invoked +bool hcd_setup_send(uint8_t rhport, uint8_t daddr, uint8_t const setup_packet[8]) { + (void) rhport; + + max3421_ep_t* ep = find_opened_ep(daddr, 0, 0); + TU_ASSERT(ep); + + ep->ep_dir = 0; + ep->is_setup = 1; + ep->buf = (uint8_t*)(uintptr_t) setup_packet; + ep->total_len = 8; + ep->xferred_len = 0; + ep->xfer_complete = 0; + ep->xfer_pending = 1; + + // carry out transfer if not busy + if ( !atomic_flag_test_and_set(&_hcd_data.busy) ) { + xact_inout(rhport, ep, true, false); + } + + return true; +} + +// clear stall, data toggle is also reset to DATA0 +bool hcd_edpt_clear_stall(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { + (void) rhport; + (void) dev_addr; + (void) ep_addr; + + return false; +} + +//--------------------------------------------------------------------+ +// Interrupt Handler +//--------------------------------------------------------------------+ + +static void handle_connect_irq(uint8_t rhport, bool in_isr) { + uint8_t const hrsl = reg_read(rhport, HRSL_ADDR, in_isr); + uint8_t const jk = hrsl & (HRSL_JSTATUS | HRSL_KSTATUS); + + uint8_t new_mode = MODE_DPPULLDN | MODE_DMPULLDN | MODE_HOST; + TU_LOG2_HEX(jk); + + switch(jk) { + case 0x00: // SEO is disconnected + case (HRSL_JSTATUS | HRSL_KSTATUS): // SE1 is illegal + mode_write(rhport, new_mode, in_isr); + + // port reset anyway, this will help to stable bus signal for next connection + reg_write(rhport, HCTL_ADDR, HCTL_BUSRST, in_isr); + hcd_event_device_remove(rhport, in_isr); + reg_write(rhport, HCTL_ADDR, 0, in_isr); + break; + + default: { + // Bus Reset also cause CONDET IRQ, skip if we are already connected and doing bus reset + if ((_hcd_data.hirq & HIRQ_BUSEVENT_IRQ) && (_hcd_data.mode & MODE_SOFKAENAB)) { + break; + } + + // Low speed if (LS = 1 and J-state) or (LS = 0 and K-State) + // However, since we are always in full speed mode, we can just check J-state + if (jk == HRSL_KSTATUS) { + new_mode |= MODE_LOWSPEED; + TU_LOG3("Low speed\n"); + }else { + TU_LOG3("Full speed\n"); + } + new_mode |= MODE_SOFKAENAB; + mode_write(rhport, new_mode, in_isr); + + // FIXME multiple MAX3421 rootdevice address is not 1 + uint8_t const daddr = 1; + free_ep(daddr); + + hcd_event_device_attach(rhport, in_isr); + break; + } + } +} + +static void xfer_complete_isr(uint8_t rhport, max3421_ep_t *ep, xfer_result_t result, uint8_t hrsl, bool in_isr) { + uint8_t const ep_addr = tu_edpt_addr(ep->ep_num, ep->ep_dir); + + // save data toggle + if (ep->ep_dir) { + ep->data_toggle = (hrsl & HRSL_RCVTOGRD) ? 1 : 0; + }else { + ep->data_toggle = (hrsl & HRSL_SNDTOGRD) ? 1 : 0; + } + + ep->xfer_pending = 0; + hcd_event_xfer_complete(ep->daddr, ep_addr, ep->xferred_len, result, in_isr); + + // Find next pending endpoint + max3421_ep_t *next_ep = find_next_pending_ep(ep); + if (next_ep) { + xact_inout(rhport, next_ep, true, in_isr); + }else { + // no more pending + atomic_flag_clear(&_hcd_data.busy); + } +} + +static void handle_xfer_done(uint8_t rhport, bool in_isr) { + uint8_t const hrsl = reg_read(rhport, HRSL_ADDR, in_isr); + uint8_t const hresult = hrsl & HRSL_RESULT_MASK; + + uint8_t const ep_num = _hcd_data.hxfr & HXFR_EPNUM_MASK; + uint8_t const hxfr_type = _hcd_data.hxfr & 0xf0; + uint8_t const ep_dir = ((hxfr_type & HXFR_SETUP) || (hxfr_type & HXFR_OUT_NIN)) ? 0 : 1; + + max3421_ep_t *ep = find_opened_ep(_hcd_data.peraddr, ep_num, ep_dir); + TU_VERIFY(ep, ); + + xfer_result_t xfer_result; + switch(hresult) { + case HRSL_SUCCESS: + xfer_result = XFER_RESULT_SUCCESS; + break; + + case HRSL_STALL: + xfer_result = XFER_RESULT_STALLED; + break; + + case HRSL_NAK: + if (ep_num == 0) { + // NAK on control, retry immediately + hxfr_write(rhport, _hcd_data.hxfr, in_isr); + }else { + // NAK on non-control, find next pending to switch + max3421_ep_t *next_ep = find_next_pending_ep(ep); + + if (ep == next_ep) { + // this endpoint is only one pending, retry immediately + hxfr_write(rhport, _hcd_data.hxfr, in_isr); + }else if (next_ep) { + // switch to next pending TODO could have issue with double buffered if not clear previously out data + xact_inout(rhport, next_ep, true, in_isr); + }else { + TU_ASSERT(false,); + } + } + return; + + case HRSL_BAD_REQ: + // occurred when initialized without any pending transfer. Skip for now + return; + + default: + TU_LOG3("HRSL: %02X\r\n", hrsl); + xfer_result = XFER_RESULT_FAILED; + break; + } + + if (xfer_result != XFER_RESULT_SUCCESS) { + xfer_complete_isr(rhport, ep, xfer_result, hrsl, in_isr); + return; + } + + if (ep_dir) { + // IN transfer: fifo data is already received in RCVDAV IRQ + if ( hxfr_type & HXFR_HS ) { + ep->xfer_complete = 1; + } + + // short packet or all bytes transferred + if ( ep->xfer_complete ) { + xfer_complete_isr(rhport, ep, xfer_result, hrsl, in_isr); + }else { + // more to transfer + hxfr_write(rhport, _hcd_data.hxfr, in_isr); + } + } else { + // SETUP or OUT transfer + uint8_t xact_len; + + if (hxfr_type & HXFR_SETUP) { + xact_len = 8; + } else if (hxfr_type & HXFR_HS) { + xact_len = 0; + } else { + xact_len = _hcd_data.sndbc; + } + + ep->xferred_len += xact_len; + ep->buf += xact_len; + + if (xact_len < ep->packet_size || ep->xferred_len >= ep->total_len) { + xfer_complete_isr(rhport, ep, xfer_result, hrsl, in_isr); + } else { + // more to transfer + xact_out(rhport, ep, false, in_isr); + } + } +} + +#if CFG_TUSB_DEBUG >= 3 +void print_hirq(uint8_t hirq) { + TU_LOG3_HEX(hirq); + + if (hirq & HIRQ_HXFRDN_IRQ) TU_LOG3(" HXFRDN"); + if (hirq & HIRQ_FRAME_IRQ) TU_LOG3(" FRAME"); + if (hirq & HIRQ_CONDET_IRQ) TU_LOG3(" CONDET"); + if (hirq & HIRQ_SUSDN_IRQ) TU_LOG3(" SUSDN"); + if (hirq & HIRQ_SNDBAV_IRQ) TU_LOG3(" SNDBAV"); + if (hirq & HIRQ_RCVDAV_IRQ) TU_LOG3(" RCVDAV"); + if (hirq & HIRQ_RWU_IRQ) TU_LOG3(" RWU"); + if (hirq & HIRQ_BUSEVENT_IRQ) TU_LOG3(" BUSEVENT"); + + TU_LOG3("\r\n"); +} +#else + #define print_hirq(hirq) +#endif + +// Interrupt handler +void hcd_int_handler(uint8_t rhport, bool in_isr) { + uint8_t hirq = reg_read(rhport, HIRQ_ADDR, in_isr) & _hcd_data.hien; + if (!hirq) return; +// print_hirq(hirq); + + if (hirq & HIRQ_FRAME_IRQ) { + _hcd_data.frame_count++; + } + + if (hirq & HIRQ_CONDET_IRQ) { + handle_connect_irq(rhport, in_isr); + } + + // queue more transfer in handle_xfer_done() can cause hirq to be set again while external IRQ may not catch and/or + // not call this handler again. So we need to loop until all IRQ are cleared + while ( hirq & (HIRQ_RCVDAV_IRQ | HIRQ_HXFRDN_IRQ) ) { + if ( hirq & HIRQ_RCVDAV_IRQ ) { + uint8_t const ep_num = _hcd_data.hxfr & HXFR_EPNUM_MASK; + max3421_ep_t *ep = find_opened_ep(_hcd_data.peraddr, ep_num, 1); + uint8_t xact_len = 0; + + // RCVDAV_IRQ can trigger 2 times (dual buffered) + while ( hirq & HIRQ_RCVDAV_IRQ ) { + uint8_t rcvbc = reg_read(rhport, RCVBC_ADDR, in_isr); + xact_len = (uint8_t) tu_min16(rcvbc, ep->total_len - ep->xferred_len); + if ( xact_len ) { + fifo_read(rhport, ep->buf, xact_len, in_isr); + ep->buf += xact_len; + ep->xferred_len += xact_len; + } + + // ack RCVDVAV IRQ + hirq_write(rhport, HIRQ_RCVDAV_IRQ, in_isr); + hirq = reg_read(rhport, HIRQ_ADDR, in_isr); + } + + if ( xact_len < ep->packet_size || ep->xferred_len >= ep->total_len ) { + ep->xfer_complete = 1; + } + } + + if ( hirq & HIRQ_HXFRDN_IRQ ) { + hirq_write(rhport, HIRQ_HXFRDN_IRQ, in_isr); + handle_xfer_done(rhport, in_isr); + } + + hirq = reg_read(rhport, HIRQ_ADDR, in_isr); + } + + // clear all interrupt except SNDBAV_IRQ (never clear by us). Note RCVDAV_IRQ, HXFRDN_IRQ already clear while processing + hirq &= ~HIRQ_SNDBAV_IRQ; + if ( hirq ) { + hirq_write(rhport, hirq, in_isr); + } +} + +#endif diff --git a/src/portable/ehci/ehci.c b/src/portable/ehci/ehci.c index c93c33fc0..572b9826c 100644 --- a/src/portable/ehci/ehci.c +++ b/src/portable/ehci/ehci.c @@ -656,8 +656,8 @@ void process_period_xfer_isr(uint8_t rhport, uint32_t interval_ms) } //------------- Host Controller Driver's Interrupt Handler -------------// -void hcd_int_handler(uint8_t rhport) -{ +void hcd_int_handler(uint8_t rhport, bool in_isr) { + (void) in_isr; ehci_registers_t* regs = ehci_data.regs; uint32_t const int_status = regs->status; diff --git a/src/portable/mentor/musb/hcd_musb.c b/src/portable/mentor/musb/hcd_musb.c index 02090df85..5312c2812 100644 --- a/src/portable/mentor/musb/hcd_musb.c +++ b/src/portable/mentor/musb/hcd_musb.c @@ -847,8 +847,10 @@ bool hcd_edpt_clear_stall(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { /*------------------------------------------------------------------- * ISR *-------------------------------------------------------------------*/ -void hcd_int_handler(uint8_t rhport) +void hcd_int_handler(uint8_t rhport, bool in_isr) { + (void) in_isr; + uint_fast8_t is, txis, rxis; is = USB0->IS; /* read and clear interrupt status */ diff --git a/src/portable/nxp/khci/hcd_khci.c b/src/portable/nxp/khci/hcd_khci.c index 55327e02d..57684b259 100644 --- a/src/portable/nxp/khci/hcd_khci.c +++ b/src/portable/nxp/khci/hcd_khci.c @@ -447,6 +447,10 @@ void hcd_port_reset(uint8_t rhport) _hcd.need_reset = false; } +void hcd_port_reset_end(uint8_t rhport) { + (void) rhport; +} + tusb_speed_t hcd_port_speed_get(uint8_t rhport) { (void)rhport; @@ -583,8 +587,9 @@ bool hcd_edpt_clear_stall(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { /*--------------------------------------------------------------------+ * ISR *--------------------------------------------------------------------+*/ -void hcd_int_handler(uint8_t rhport) +void hcd_int_handler(uint8_t rhport, bool in_isr) { + (void) in_isr; uint32_t is = KHCI->ISTAT; uint32_t msk = KHCI->INTEN; diff --git a/src/portable/ohci/ohci.c b/src/portable/ohci/ohci.c index 413e72037..f978b0965 100644 --- a/src/portable/ohci/ohci.c +++ b/src/portable/ohci/ohci.c @@ -667,8 +667,9 @@ static void done_queue_isr(uint8_t hostid) } } -void hcd_int_handler(uint8_t hostid) -{ +void hcd_int_handler(uint8_t hostid, bool in_isr) { + (void) in_isr; + uint32_t const int_en = OHCI_REG->interrupt_enable; uint32_t const int_status = OHCI_REG->interrupt_status & int_en; diff --git a/src/portable/raspberrypi/rp2040/hcd_rp2040.c b/src/portable/raspberrypi/rp2040/hcd_rp2040.c index 21dc3f67d..4ed6d36bb 100644 --- a/src/portable/raspberrypi/rp2040/hcd_rp2040.c +++ b/src/portable/raspberrypi/rp2040/hcd_rp2040.c @@ -252,9 +252,9 @@ static void __tusb_irq_path_func(hcd_rp2040_irq)(void) } } -void __tusb_irq_path_func(hcd_int_handler)(uint8_t rhport) -{ +void __tusb_irq_path_func(hcd_int_handler)(uint8_t rhport, bool in_isr) { (void) rhport; + (void) in_isr; hcd_rp2040_irq(); } diff --git a/src/portable/renesas/rusb2/dcd_rusb2.c b/src/portable/renesas/rusb2/dcd_rusb2.c index 3ec1b70b5..24edc30e7 100644 --- a/src/portable/renesas/rusb2/dcd_rusb2.c +++ b/src/portable/renesas/rusb2/dcd_rusb2.c @@ -266,6 +266,14 @@ static void pipe_read_packet_ff(rusb2_reg_t * rusb, tu_fifo_t *f, volatile void tu_fifo_advance_write_pointer(f, count); } + +static bool wait_pipe_fifo_empty(rusb2_reg_t* rusb, uint8_t num) { + TU_ASSERT(num); + while( (rusb->PIPE_CTR[num-1] & RUSB2_PIPE_CTR_INBUFM_Msk) > 0 ) {} + return true; +} + + //--------------------------------------------------------------------+ // Pipe Transfer //--------------------------------------------------------------------+ @@ -339,6 +347,7 @@ static bool pipe_xfer_in(rusb2_reg_t* rusb, unsigned num) const unsigned rem = pipe->remaining; if (!rem) { + wait_pipe_fifo_empty(rusb, num); pipe->buf = NULL; return true; } diff --git a/src/portable/renesas/rusb2/hcd_rusb2.c b/src/portable/renesas/rusb2/hcd_rusb2.c index 790cd6b32..bf95be707 100644 --- a/src/portable/renesas/rusb2/hcd_rusb2.c +++ b/src/portable/renesas/rusb2/hcd_rusb2.c @@ -771,8 +771,9 @@ bool hcd_edpt_clear_stall(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { //--------------------------------------------------------------------+ // ISR //--------------------------------------------------------------------+ -void hcd_int_handler(uint8_t rhport) -{ +void hcd_int_handler(uint8_t rhport, bool in_isr) { + (void) in_isr; + rusb2_reg_t* rusb = RUSB2_REG(rhport); unsigned is0 = rusb->INTSTS0; unsigned is1 = rusb->INTSTS1; diff --git a/src/portable/template/dcd_template.c b/src/portable/template/dcd_template.c index 590dd9fcf..12d610bd6 100644 --- a/src/portable/template/dcd_template.c +++ b/src/portable/template/dcd_template.c @@ -26,7 +26,7 @@ #include "tusb_option.h" -#if CFG_TUSB_MCU == OPT_MCU_NONE +#if CFG_TUD_ENABLED && CFG_TUSB_MCU == OPT_MCU_NONE #include "device/dcd.h" @@ -141,4 +141,6 @@ void dcd_edpt_clear_stall (uint8_t rhport, uint8_t ep_addr) (void) ep_addr; } + + #endif diff --git a/src/portable/template/hcd_template.c b/src/portable/template/hcd_template.c new file mode 100644 index 000000000..b073d6057 --- /dev/null +++ b/src/portable/template/hcd_template.c @@ -0,0 +1,163 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2023 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "tusb_option.h" + +#if CFG_TUH_ENABLED && CFG_TUSB_MCU == OPT_MCU_NONE + +#include "host/hcd.h" + +//--------------------------------------------------------------------+ +// Controller API +//--------------------------------------------------------------------+ + +// optional hcd configuration, called by tuh_configure() +bool hcd_configure(uint8_t rhport, uint32_t cfg_id, const void* cfg_param) { + (void) rhport; + (void) cfg_id; + (void) cfg_param; + + return false; +} + +// Initialize controller to host mode +bool hcd_init(uint8_t rhport) { + (void) rhport; + + return false; +} + +// Interrupt Handler +void hcd_int_handler(uint8_t rhport, bool in_isr) { + (void) rhport; + (void) in_isr; +} + +// Enable USB interrupt +void hcd_int_enable (uint8_t rhport) { + (void) rhport; +} + +// Disable USB interrupt +void hcd_int_disable(uint8_t rhport) { + (void) rhport; +} + +// Get frame number (1ms) +uint32_t hcd_frame_number(uint8_t rhport) { + (void) rhport; + + return 0; +} + +//--------------------------------------------------------------------+ +// Port API +//--------------------------------------------------------------------+ + +// Get the current connect status of roothub port +bool hcd_port_connect_status(uint8_t rhport) { + (void) rhport; + + return false; +} + +// Reset USB bus on the port. Return immediately, bus reset sequence may not be complete. +// Some port would require hcd_port_reset_end() to be invoked after 10ms to complete the reset sequence. +void hcd_port_reset(uint8_t rhport) { + (void) rhport; +} + +// Complete bus reset sequence, may be required by some controllers +void hcd_port_reset_end(uint8_t rhport) { + (void) rhport; +} + +// Get port link speed +tusb_speed_t hcd_port_speed_get(uint8_t rhport) { + (void) rhport; + + return TUSB_SPEED_FULL; +} + +// HCD closes all opened endpoints belong to this device +void hcd_device_close(uint8_t rhport, uint8_t dev_addr) { + (void) rhport; + (void) dev_addr; +} + +//--------------------------------------------------------------------+ +// Endpoints API +//--------------------------------------------------------------------+ + +// Open an endpoint +bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const * ep_desc) { + (void) rhport; + (void) dev_addr; + (void) ep_desc; + + return false; +} + +// Submit a transfer, when complete hcd_event_xfer_complete() must be invoked +bool hcd_edpt_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr, uint8_t * buffer, uint16_t buflen) { + (void) rhport; + (void) dev_addr; + (void) ep_addr; + (void) buffer; + (void) buflen; + + return false; +} + +// Abort a queued transfer. Note: it can only abort transfer that has not been started +// Return true if a queued transfer is aborted, false if there is no transfer to abort +bool hcd_edpt_abort_xfer(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { + (void) rhport; + (void) dev_addr; + (void) ep_addr; + + return false; +} + +// Submit a special transfer to send 8-byte Setup Packet, when complete hcd_event_xfer_complete() must be invoked +bool hcd_setup_send(uint8_t rhport, uint8_t dev_addr, uint8_t const setup_packet[8]) { + (void) rhport; + (void) dev_addr; + (void) setup_packet; + + return false; +} + +// clear stall, data toggle is also reset to DATA0 +bool hcd_edpt_clear_stall(uint8_t rhport, uint8_t dev_addr, uint8_t ep_addr) { + (void) rhport; + (void) dev_addr; + (void) ep_addr; + + return false; +} + +#endif diff --git a/src/tinyusb.mk b/src/tinyusb.mk index 85052f90f..89ea0212c 100644 --- a/src/tinyusb.mk +++ b/src/tinyusb.mk @@ -17,3 +17,10 @@ TINYUSB_SRC_C += \ src/class/usbtmc/usbtmc_device.c \ src/class/video/video_device.c \ src/class/vendor/vendor_device.c \ + src/host/usbh.c \ + src/host/hub.c \ + src/class/cdc/cdc_host.c \ + src/class/hid/hid_host.c \ + src/class/msc/msc_host.c \ + src/class/vendor/vendor_host.c \ + src/typec/usbc.c \ diff --git a/src/tusb.h b/src/tusb.h index 37a521fa8..c9d56d3c3 100644 --- a/src/tusb.h +++ b/src/tusb.h @@ -64,7 +64,10 @@ #if CFG_TUH_VENDOR #include "class/vendor/vendor_host.h" #endif - +#else + #ifndef tuh_int_handler + #define tuh_int_handler(...) + #endif #endif //------------- DEVICE -------------// @@ -118,6 +121,10 @@ #if CFG_TUD_BTH #include "class/bth/bth_device.h" #endif +#else + #ifndef tud_int_handler + #define tud_int_handler(...) + #endif #endif diff --git a/src/tusb_option.h b/src/tusb_option.h index c72117850..a41f5a07e 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -424,11 +424,11 @@ //------------- CLASS -------------// #ifndef CFG_TUH_HUB -#define CFG_TUH_HUB 0 + #define CFG_TUH_HUB 0 #endif #ifndef CFG_TUH_CDC -#define CFG_TUH_CDC 0 + #define CFG_TUH_CDC 0 #endif #ifndef CFG_TUH_CDC_FTDI @@ -442,34 +442,38 @@ #endif #ifndef CFG_TUH_HID -#define CFG_TUH_HID 0 + #define CFG_TUH_HID 0 #endif #ifndef CFG_TUH_MIDI -#define CFG_TUH_MIDI 0 + #define CFG_TUH_MIDI 0 #endif #ifndef CFG_TUH_MSC -#define CFG_TUH_MSC 0 + #define CFG_TUH_MSC 0 #endif #ifndef CFG_TUH_VENDOR -#define CFG_TUH_VENDOR 0 + #define CFG_TUH_VENDOR 0 #endif #ifndef CFG_TUH_API_EDPT_XFER -#define CFG_TUH_API_EDPT_XFER 0 + #define CFG_TUH_API_EDPT_XFER 0 #endif // Enable PIO-USB software host controller #ifndef CFG_TUH_RPI_PIO_USB -#define CFG_TUH_RPI_PIO_USB 0 + #define CFG_TUH_RPI_PIO_USB 0 #endif #ifndef CFG_TUD_RPI_PIO_USB -#define CFG_TUD_RPI_PIO_USB 0 + #define CFG_TUD_RPI_PIO_USB 0 #endif +// MAX3421 Host controller option +#ifndef CFG_TUH_MAX3421 + #define CFG_TUH_MAX3421 0 +#endif //--------------------------------------------------------------------+ // TypeC Options (Default) |