| Age | Commit message (Collapse) | Author |
|---|
|
Coverage rows now resolve the de-collided module-qualified key introduced
for same-named statics. RA boards: document that --attach requires a
debugger-booted target - the C_DEBUGEN gate exists because an unguarded
TRCKCR write bricks standalone boots (hardware-proven), so the limitation
is documented rather than the guard weakened; a debugger-side TRCKCR hook
can lift it later once re-verified on hardware. The stm32n6 board-gating
suggestion is not taken: N6 trace pins are AF0-fixed chip-level, the same
family-wide pattern as stm32h7.
|
|
The board-specific PHY-reset nets move behind a board.h opt-in
(TRACE_ETM_QUIET_ENET_PHY on same70_xplained and mimxrt1170_evkb) so other
boards of those families cannot inherit a foreign GPIO write; the
chip-level trace pin muxes stay family-wide by design (same pattern as
stm32h7). same70 reference: width 1 is the validated default until the
J403.16 rework, and the hooks now wait (bounded) for PCKRDY3 before Ozone
arms trace. ra8m1 reference caches the boot ROM in AfterTargetConnect so
--attach sessions decode ROM execution too. etm_capture rejects an
unexpanded CMake JLINK_DEVICE with a clear error; PIO-USB + TRACE_ETM on
RP2350 is now a compile error (48 MHz trace clock is too slow for PIO-USB
and a runtime switch would desync the stream); etm_profile keeps
same-named statics from different modules as distinct rows.
Build-verified: same70_xplained, mimxrt1170_evkb, raspberry_pi_pico2.
|
|
Bot findings (Copilot/Codex): no-op board_trace_pinmux stubs for
lpcxpresso18s37/43s67 (TRACE_ETM otherwise broke their build), SAME70
ID_PIOD clock enable, capture-script duplicate BeforeTargetConnect on the
RA references, profile-script support for --no-timestamps itraces.
Deep review (whole branch): same70_xplained board row + caveat restored,
stale pico2 72 MHz claim corrected to the shipped 48, explicit
SetTracePortWidth(4) in the three references that relied on Ozone's
default, coverage-cell guard, median-based SysTick calibration, dead
session flag removed, stale RA8M1 divider comment fixed (0x02 = /4 is the
validated chip max) and the debugger guard indented.
EVKB bench findings: only R1884/D3 remains open (D1/D2 meter-verified);
RT1176 trace width is 1 or 4 only - J-Link arms the CSSYS TPIU and its
own sampler at 4-bit for any width>=2 request; a powered MCU-Link USB
breaks the external probe even with JP4 shorted.
|
|
Headless instruction-trace capture on any TRACE_ETM-capable board via
Ozone's automation socket (port 19201, xvfb): etm_capture.py generates a
throwaway project from the board's committed ozone reference (device, TIF,
width, timing, hooks, JLinkScript inheritance), drives the session, and
exports profile/coverage; etm_profile.py renders hot functions, coverage,
per-line/instruction counters and ISR timing from the itrace stream.
SKILL.md carries rig discipline, capture recipes, a new-board bring-up
ladder and troubleshooting; boards.md is the per-board reference (config
table + caveats) for all validated boards.
|
