| Age | Commit message (Collapse) | Author |
|---|
|
|
|
Set GitHub Sponsors username in FUNDING.yml
|
|
Updated GitHub Sponsors username for funding.
|
|
fix(dcd_ch32_usbfs): fix dropped bulk OUT packets by properly re-arming EP_RX_CTRL state
|
|
Signed-off-by: HiFiPhile <[email protected]>
|
|
Refactor the driver to follow USBFS style for easier maintenance.
Replace the old packet/response helpers with explicit queue and update paths for IN and OUT transfers.
Introduce transfer validity tracking and per-endpoint data toggle state.
Reset toggle state on init, close-all, endpoint close, clear-stall, and bus reset.
Initialize endpoint controls consistently in NAK + TOG_0 mode.
Tighten EP0 setup/status handling and route transfer IRQ processing through the transfer-flag path.
Stop enabling ISO_ACT in INT_EN and clear unhandled interrupt flags explicitly.
Signed-off-by: HiFiPhile <[email protected]>
|
|
Signed-off-by: HiFiPhile <[email protected]>
|
|
It would casue race condition, SETUP packet is always acked.
Signed-off-by: HiFiPhile <[email protected]>
|
|
Signed-off-by: HiFiPhile <[email protected]>
|
|
Signed-off-by: HiFiPhile <[email protected]>
|
|
Signed-off-by: HiFiPhile <[email protected]>
|
|
Signed-off-by: HiFiPhile <[email protected]>
|
|
Signed-off-by: HiFiPhile <[email protected]>
|
|
OUT is still buggy
Signed-off-by: HiFiPhile <[email protected]>
|
|
Signed-off-by: HiFiPhile <[email protected]>
|
|
Signed-off-by: HiFiPhile <[email protected]>
|
|
Signed-off-by: HiFiPhile <[email protected]>
|
|
Signed-off-by: HiFiPhile <[email protected]>
|
|
|
|
feat: Add USB-MIDI 2.0 Device and Host class drivers
|
|
|
|
Signed-off-by: HiFiPhile <[email protected]>
|
|
packet api
Signed-off-by: HiFiPhile <[email protected]>
|
|
|
|
Default RX/TX buffers to EPSIZE for both device and host. Document
drain-in-loop on ump_read; example device callback drains until
empty.
|
|
Match midi2_host pattern. Literal 256 underran HS endpoints (512B).
|
|
Lets each instance return different NUM_GROUPS, NUM_FUNCTION_BLOCKS,
EP_NAME and PRODUCT_ID. Defaults fall back to the macros.
|
|
MT is in byte 3 of the UMP word in LE memory, not byte 0. Buffers
at mps blocked RX xfer re-arm on partial packets.
|
|
Signed-off-by: HiFiPhile <[email protected]>
|
|
Signed-off-by: HiFiPhile <[email protected]>
|
|
Signed-off-by: HiFiPhile <[email protected]>
|
|
|
|
stm32h573i_dk, stm32n657nucleo and stm32n6570dk have the same
pre-existing uninitialized io_ctx.GetTick in their board.h that we
already skip on stm32h7s3nucleo. Trips with Make+LTO; CMake passes.
|
|
arm-clang fails with -Werror=unused-function; arm-gcc was silently
omitting it via LTO. The helper was never called.
|
|
Make build was missing midi2_device.c/midi2_host.c from
src/tinyusb.mk. Skip stm32h7s3nucleo board which exposes a
pre-existing uninitialized warning in its board.h (board_init2)
under Make+LTO.
|
|
Restrict midi2_host build to MCUs with USB host support (cloned from
midi_rx) and skip SAMD11 from midi2_device (ROM overflow on link).
|
|
Drop Feather-specific scaffolding (SSD1306 display, font, PIO-USB pin
override) and rename the directory to midi2_host. The example is now a
single main.c + tusb_config.h pair following the midi_rx pattern, with a
printf-only UMP decoder for Channel Voice messages.
Build-tested on adafruit_feather_rp2040_usb_host, daisyseed (stm32h7),
mimxrt1010_evk, stm32f407disco, raspberry_pi_pico2, b_u585i_iot2a,
portenta_c33, stm32h503nucleo, stlinkv3mini, feather_stm32f405.
Ref #3571
|
|
Remove the rp2040-only guard; the example now follows the audio_test
pattern (only Espressif uses its own build system). Add CMakePresets.json
and generic product strings.
The runtime fallback picks the path that matches the host state, per
message, mirroring the idea behind the UAC examples:
Alt 0 USB-MIDI 1.0 32-bit Event Packets (packet_write)
Alt 1 + MIDI 1.0 negotiated UMP MT 0x2 (ump_write)
Alt 1 + MIDI 2.0 negotiated UMP MT 0x4 (ump_write)
Build-tested on rp2040, rp2350, stm32f0/f1/f2/f3/f4/f7/g0/g4/h5/h7/l0/l4/u0/u5/wb/c0,
samd2x_l2x, samd5x_e5x, same7x, nrf, imxrt, lpc17, lpc55, mcx, ra,
da1469x, efm32.
Ref #3571
|
|
The edpt_stream auto-flush is byte-oriented and could cut an UMP message
in half when the FIFO reached wMaxPacketSize, corrupting the peer's RX
context. Pre-flush whole packets before writing one that would cross the
boundary on both device (tud_midi2_n_ump_write) and host
(tuh_midi2_ump_write) paths. Host write also becomes packet-aware
instead of word-by-word.
Ref #3571
|
|
Alt 0 carries USB-MIDI 1.0 32-bit Event Packets, not UMP words; calling
the UMP API there would misinterpret the stream. Expose MIDI_PROTOCOL_MIDI1
and MIDI_PROTOCOL_MIDI2 in the public header so applications can branch on
the negotiated protocol.
Ref #3571
|
|
rp2040 host: fix SET_REPORT (and any OUT-data control xfer) sending DATA0 instead of DATA1
|
|
instead of DATA1
hcd_edpt_xfer() previously reset ep->next_pid to 1 only when the control
endpoint direction changed between stages. That handled IN-data control
transfers (e.g. GET_REPORT, GET_DESCRIPTOR) where SETUP is OUT and DATA is
IN, but not OUT-data class requests like SET_REPORT, where SETUP and DATA
are both OUT and the direction-change check is false. ep->next_pid was
left at 0 from hcd_edpt_open(), so the DATA stage went on the wire as
DATA0 when the device expected DATA1. Strict devices (observed: Elgato
Stream Deck) treat this as a protocol violation and disconnect.
Key off "endpoint 0" instead of "direction changed", restoring the
previous behavior. Interrupt/bulk endpoints take the ep->interrupt_num > 0
branch above and never reach this code, so they are unaffected.
|
|
Signed-off-by: HiFiPhile <[email protected]>
|
|
Handle cases where a new SETUP arrives before the previous control transfer fully completes by buffering the SETUP and replaying it after status completion. Split EP0 DATA state into DATA_IN/DATA_OUT and finalize pending status-out completion before processing deferred SETUP.
Signed-off-by: HiFiPhile <[email protected]>
|
|
Add GetPartialObject to MTP example
|
|
Added support for GetPartialObject for better compatibility with Linux file explorers.
|
|
dcd/dwc2: fix ISO IN endpoint become disabled after incomplete transfer
|
|
Signed-off-by: HiFiPhile <[email protected]>
|
|
ci: MemBrowse - add libraries mapping support
|
|
Signed-off-by: HiFiPhile <[email protected]>
|
