| Age | Commit message (Collapse) | Author |
|---|
|
This allow to build with single FIFO for devices with multiple channels.
Having just one FIFO greatly reduces time needed to feed endpoint.
This change also allows to have one FIFO with 24 bit samples that
is not rounded up to 32 bit elements.
CFG_TUD_AUDIO_RX_ITEMSIZE and CFG_TUD_AUDIO_TX_ITEMSIZE can be manually
defined. This allows to use FIFO more efficiently when 24 bits samples
are already using 3 bytes, in this case there is no need to put them
into FIFO one by one.
For 8, 16, 32 bits samples size efficient FIFO access is always used
when single FIFO is selected.
This also changes FIFO element size to 1, FIFO usage was confusing
in some place it treated content as byte base in other it looked like
ITEM size is to be used. Also bufsize that in most (maybe all) cases
was really meaning item count.
bufsize now mean buffer size in bytes so there is no confusion.
|
|
void function used TU_VERIFY in a way that returned bool value.
It would not compile.
|
|
Function was not checking buffer size correctly due missing parenthesis.
|
|
Function prototype did not have return type specified by mistake.
|
|
Some API uses interface number as argument, some wants to have
rhport.
To accommodate need of rhport for functions that don't have it
rhport can be extracted from interface data.
|
|
Explicit feedback attribute was missing.
No synchronization now also has definition.
|
|
Having just inline keyword for function specified in header
may not be enough to generate code for function.
Adding static solves this problem.
static inline is used in all other inline functions in TinyUSB.
|
|
Recommended FIFO allocation schema includes 2 maximum endpoint sizes.
Comment suggested that this is the case while it would work according
to this description only in checked endpoints were ascending sizes.
Also two same size endpoints would be counted as one.
That is fixed by way sz is filled.
Calculation used too much modulo operation while single division was enough
to account for odd FIFO sizes.
Extra space that is evenly distributed between Bulk and control endpoints
was incorrectly calculated it could prevent allocation of ISO endpoint FIFO
when bulk endpoints existed with smaller endpoint numbers.
Minimum endpoint FIFO size is 16 32bit words, FIFO space requirement is
now observed.
|
|
|
|
|
|
|
|
Update host
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
properly init fpu on LPC M4
|
|
|
|
|
|
define __USE_CMSIS instead of __USE_LPCOPEN will have startup enable FPU
on startup properly. Although it is only relevant to lpx43/40 series,
change all to __USE_CMSIS for consistency
|
|
|
|
tested host with lpc4357, don't use fpu with lpc m4 since it seems to
cause hardfault (stack does not make use of fpu anyway).
|
|
|
|
This is helpful if you have already encoded audio data and want an
efficient way to send it. However, this approach is NOT THREADSAFE so
far and works realiably ONLY IF tud_audio_n_write_ep_in_buffer() is NOT
called form an interrupt!
|
|
|
|
|
|
|
|
|
|
audio_device: Fix small issues here and there
|
|
Improve midi
|
|
add itsybitsy nrf52840 board support
|
|
|
|
CFG_TUD_AUDIO_TX_BUFSIZE seems to be used only in 3 preprocessor
condition while in other places CFG_TUD_AUDIO_TX_FIFO_SIZE is used.
|
|
b_bytes_copied was pointer with NULL value instead of
plain variable.
NULL pointer was passed to audio_tx_done_cb() and dereference
as well.
Now variable is not a pointer.
|
|
Buffer for TX and RX FIFO was not taking into account
size of element leading to out of bound access.
audio_tx_done_type_I_pcm_ff_cb() reported copied bytes was not returning
correct value number if channels was omitted in computation.
Transfer size calculation uses simpler arithmetic.
|
|
|
|
- fix #436 tud_midi_rx_cb() not invoked
- fix xfer_cb() not handle ep in
- add ZLP if needed
|
|
In several place p_desc_end calculation was not taking into account
that starting pointer (_audiod_itf[idxDriver].p_desc) was pointing
past interface association descriptor.
It would result in accessing random memory.
|
|
Add dcd_edpt_close() to synopsys
|
|
|
|
add OPT_MCU_SAMD11
|
|
skip ci build for example that need more ROM/RAM could fit into SAMD11
|
|
add support for SAMD11 devices / add samd11_xplained board
|
|
|
|
fix samg55 ci build
|
