summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-11-25add the most important file of the project: CONTRIBUTORS.mdhathach
2019-11-24Merge pull request #225 from xobs/fomu-offset-fixHa Thach
bsp: fomu: fix rom address for example programs
2019-11-24bsp: fomu: fix rom address for example programsSean Cross
During development, the ROM address was at offset 0x2001a000 (due to the fact that the test program was located immediately following the bitstream). In normal Fomus, the ROM address is at offset 0x20040000, in order to take into account additional bitstreams and bootloaders. Correct the address to the offset in order to get examples working with existing Fomus. Signed-off-by: Sean Cross <[email protected]>
2019-11-24Merge branch 'develop'hathach
2019-11-24more dochathach
2019-11-23update doc, RT1011 verified to work, thanks to @arturo182hathach
2019-11-23Merge pull request #224 from hathach/developHa Thach
added rt1010 board support
2019-11-23added rt1010 board supporthathach
not tested on the actual hardware board though.
2019-11-23Merge pull request #223 from hathach/developHa Thach
Added board RT1050 EVKB, RT1020 EVK, RT1015 EVK
2019-11-23doc updatehathach
2019-11-23added rt1015 evk boardhathach
2019-11-23doc updatehathach
2019-11-23fix rt1010 rt1020 only has 1 usb controller, rt1050 rt1060 has 2hathach
2019-11-23added MIMX RT1052 Evaluation Kithathach
2019-11-22Merge pull request #222 from hathach/developHa Thach
add RT1060 evk board support
2019-11-22update doc for RT1060 evkhathach
2019-11-22rename OPT_MCU_IMXRT10XX to OPT_MCU_MIMXRT10XXhathach
2019-11-22added iMX RT1060 EVK board supporthathach
board_text, cdc_msc, hid_composite all work
2019-11-22rename OPT_MCU_RT10XX to OPT_MCU_IMXRT10XXhathach
2019-11-22Merge pull request #221 from hathach/developHa Thach
doc update
2019-11-22doc updatehathach
2019-11-22Merge pull request #220 from hathach/developHa Thach
Port NXP iMX RT10XX
2019-11-22rename dcd lpc18_43 to transdimensionhathach
2019-11-22rename dcd_lpc18_43 to dcd_transdimensionhathach
2019-11-22move nxp dcd ehci controller reset and modde into dcdhathach
rt1064 work with cdc msc example
2019-11-22config clean uphathach
2019-11-22clean uphathach
2019-11-22able to compile dcd 18/43 with rt1064hathach
2019-11-22more clean uphathach
2019-11-22more clean uphathach
2019-11-22more constant rename clean uphathach
2019-11-22refactor dcd_lpc18_43, making it capatible with rt10xxhathach
2019-11-22clean up dcd lpc18_43hathach
drop supporting both device mode on both ports.
2019-11-22move dcd_lpc18_43.h into .c filehathach
2019-11-22adding irq to rt1064evkhathach
2019-11-22fix segger host examplehathach
2019-11-21moving irq to bsp for lpc17/40hathach
2019-11-21adding tud_isr/tuh_isr with lpc18/43hathach
2019-11-21update build all script to build a specifichathach
2019-11-21rename lpc 17/18 irq to dcd_isr/hcd_isrhathach
2019-11-20Merge pull request #219 from xobs/fix-eptri-ep-clearhathach
eptri: clear proper endpoint when opening IN port
2019-11-20rt1064evk led, button, uart all workhathach
2019-11-20eptri: clear proper endpoint when opening IN portSean Cross
When opening a USB port, we ensure the buffer is NULL and has a length of 0. Due to a mistake in specifying the endpoint type, we never actually cleared the value when opening an IN endpoint. This patch fixes the comparison when opening an IN endpoint. This fixes issue #218. Signed-off-by: Sean Cross <[email protected]>
2019-11-20move -flto to board.mkhathach
current board that doesn work with flto is spresense and mimxrt10xx (due to xip image_vector_table is optimized out).
2019-11-20adding support for NXP rt1064 evk board, boad test led + sw8 work.hathach
LTO is temporary disabled
2019-11-18Merge pull request #217 from xobs/valentyusb-eptrihathach
WIP: Add Valentyusb eptri
2019-11-14Merge pull request #208 from hathach/fix-issue-207hathach
Fix issue 207
2019-11-13fomu: bsp: don't call usb isr when usb is disabledSean Cross
When compiled without usb support, we don't want to call the USB ISR. Signed-off-by: Sean Cross <[email protected]>
2019-11-13fomu: bsp: remove unused messible functionsSean Cross
These functions are unused in the current implementation. Signed-off-by: Sean Cross <[email protected]>
2019-11-13examples: make: specify CROSS_COMPILE for fomuSean Cross
When BOARD=fomu, use the riscv cross-compiler. Otherwise, use the default arm compiler. This can be overridden by passing CROSS_COMIPLE on the command line. Note that there are now three common risc-v prefixes: - riscv32-unknown-elf- : Common for users who compile their own - riscv64-unknown-elf- : Upstream multiarch toolchain from SiFive - riscv-none-embed- : xPack embedded version of SiFive toolchain Here we assume users are using the `riscv-none-embed-` toolchain from xPack, because it appears to be growing more common. Additionally, there is much confusion surrounding `riscv64-unknown-elf-`, which actually includes both 32- and 64-bit runtimes and can generate software for both. Signed-off-by: Sean Cross <[email protected]>
generated by cgit v1.3.1 (git 2.54.0) at 2026-09-02 03:15:23 +0000