summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-10-08add flash-pyocd supporthathach
2020-10-08clean up jlink default interfacehathach
2020-10-08Merge pull request #528 from jgressmann/port-atsame51-to-tinyusbHa Thach
Adds files for the open source D5035-01 hardware
2020-10-07fix variable names. add itf n callbacks to multihidZachery Littell
2020-10-07mimxrt1010_evk: double stack size to allow net_lwip_webserver to runPeter Lawrence
2020-10-07D5035-01 bsp: fix typoJean Gressmann
2020-10-07Address various issues raised by TinyUSB maintainersJean Gressmann
- remove OPT_MCU_SAME51 in favor of OPT_MCU_SAME5X and working around differences in the Atmel bsp locally in the D5035-01 bsp. - rename board folder to d5035_01 for consistency with other boards
2020-10-07Merge pull request #530 from hathach/fix-idf-latestHa Thach
fix usb pin config with idf latest
2020-10-07fix usb pin config with idf latesthathach
2020-10-07Remove CFG_TUD_AUDIO_TX_DMA_RINGBUFFER_SIZE which is not needed any moreReinhard Panhuber
2020-10-07Merge pull request #3 from hathach/PanRe-uac2-fix-buildPanRe
Pan re uac2 fix build
2020-10-07Merge pull request #529 from gh2o/stm32-raceHa Thach
stm32 fsdev: fix ISTR and CTR_RX/TX race conditions
2020-10-07tab -> spaceshathach
2020-10-07fix audio_test buildhathach
2020-10-06stm32: fix ISTR and CTR_RX/TX race conditionsGavin Li
2020-10-06D5035-01: more natural Makefile variable useJean Gressmann
2020-10-06Adds D5035-01 to the list of supported boardsJean Gressmann
2020-10-06Merge branch 'uac2' of https://github.com/PanRe/tinyusb into PanRe-uac2hathach
2020-10-05D5035-01 bsp: fix paths, default to hw rev 1 (automated build)Jean Gressmann
2020-10-05Update Microchip submodule commitJean Gressmann
2020-10-06Merge pull request #516 from PanRe/tusb_fifo_unmaksed_pointersHa Thach
Tusb fifo unmaksed pointers
2020-10-05Adds files for the open source D5035-01 hardwareJean Gressmann
The board's files are here: https://github.com/RudolphRiedel/USB_CAN-FD
2020-10-03Change CFG_TUSB_CONFIG_FILE mechanism to improve header file scanningNiklas Hauser
2020-10-03Allow overwriting TU_ASSERT etc macrosNiklas Hauser
2020-10-03Use tu_printf instead of printfNiklas Hauser
2020-10-03Use C++11 static_assert when availableNiklas Hauser
2020-10-03Revert #define CFG_TUSB_DEBUG 2 to #define CFG_TUSB_DEBUG 0Reinhard Panhuber
Change 1 << 31 to 0x100000000 in audio.h
2020-10-02fix simple pull request comments. Implement descriptor index hack.Zachery Littell
2020-10-02Merge pull request #518 from kasjer/kasjer/nrf5x-iso-supportHa Thach
nrf5x iso support
2020-10-01Add pipeline task for exampleZachery Littell
2020-10-01create hid multiple interface exampleZachery Littell
2020-10-01add index to report descriptor callback. this is breaking and needs to be ↵Zachery Littell
reviewed
2020-10-01create N functions and inlines for multi hid interfacesZachery Littell
2020-10-01Change AUDIO_CS_INTERFACE_HEADER to AUDIO_CS_AC_INTERFACE_HEADERReinhard Panhuber
2020-10-01nrf5x: Add support for ISO endpointsJerzy Kasenberg
ISO endpoints were not covered so far by the driver code. This adds support for ISO IN and OUT endpoint handling. Registers for ISO IN(OUT) endpoints are placed just after normal IN(OUT) so in some cases common code could be used for handling all type of transfers. Generally code synchronizes ISO endpoint handling to SOF interrupt. This code does not change the way of how non-ISO endpoints are treated. Code uses strategy outlined in nRF52840 Produce Specification v1.0 sections 6.35.11.1 and 6.35.11.2.
2020-10-01nrf5x: Increase size of mps to 16 bitsJerzy Kasenberg
msp stores max packet size. For ISO endpoints 8 bits is not enough so it's changed to 16 bits.
2020-10-01nrf5x: Add dcd_edpt_closeJerzy Kasenberg
Closing endpoints can be important when there are alternate instances. This adds functionality of closing endpoints similar to what exists in other drivers.
2020-10-01device: Make number of endpoints configurableJerzy Kasenberg
Currently number of endpoints was hard coded to 8. NRF52 has 9 IN and 9 OUT endpoints. ISO endpoints are 0x08 and 0x88 and without this change those two ISO endpoint could not be used.
2020-09-29Change AUDIO_FUNC_PROTOCOL_CODE_UNDEF for midi in usbd.hReinhard Panhuber
2020-09-28Change AUDIO_PROTOCOL_V1 to AUDIO_FUNC_PROTOCOL_CODE_UNDEF in midi.c.Reinhard Panhuber
The USB specification does not define any AUDIO_PROTOCOL_V1!
2020-09-28Fix minor issue.Reinhard Panhuber
- Change set_EP0_max_pkt_size() to set_EP0_max_pkt_size(void).
2020-09-28Cleanup for PR.Reinhard Panhuber
2020-09-28Merge remote-tracking branch 'upstream/master' into uac2Reinhard Panhuber
2020-09-28Merge pull request #2 from kasjer/kasjer/uac2PanRe
UAC2 pre-master
2020-09-28audio: Add descriptor for mono speakerJerzy Kasenberg
This provides descriptor for mono speaker with explicit feedback.
2020-09-28synopsys: Fix odd/even frame handling for ISOJerzy Kasenberg
Current implementation always sets odd/even bit for ISO transactions. This is a good strategy only if interval is 1. For ISO endpoint interval in (micro)frames is computed as 2^(interval-1), which means that odd/frame number should stay same for interval values > 1. With this change only when interval is 1 odd/even bit is modified.
2020-09-28audio_device: Update explicit feedback supportJerzy Kasenberg
Feedback can be specified by the user code and will be sent at feedback endpoint specified interval.
2020-09-28synopsys: Remove compilation warning in dcd_edpt_closeJerzy Kasenberg
dcd_edpt_close() no longer modifies FIFO distribution. Code that that was commented out is removed along with variables that are no longer used. FIFO distribution among endpoints is handled upfront and does not need to be modified in open and close endpoint functions.
2020-09-28audio_device: Allow one FIFO for N channelsJerzy Kasenberg
This allow to build with single FIFO for devices with multiple channels. Having just one FIFO greatly reduces time needed to feed endpoint. This change also allows to have one FIFO with 24 bit samples that is not rounded up to 32 bit elements. CFG_TUD_AUDIO_RX_ITEMSIZE and CFG_TUD_AUDIO_TX_ITEMSIZE can be manually defined. This allows to use FIFO more efficiently when 24 bits samples are already using 3 bytes, in this case there is no need to put them into FIFO one by one. For 8, 16, 32 bits samples size efficient FIFO access is always used when single FIFO is selected. This also changes FIFO element size to 1, FIFO usage was confusing in some place it treated content as byte base in other it looked like ITEM size is to be used. Also bufsize that in most (maybe all) cases was really meaning item count. bufsize now mean buffer size in bytes so there is no confusion.
2020-09-28audio_device: Fix tud_audio_n_read_flush TU_VERIFY usageJerzy Kasenberg
void function used TU_VERIFY in a way that returned bool value. It would not compile.
generated by cgit v1.3.1 (git 2.54.0) at 2026-09-07 23:59:57 +0000