summaryrefslogtreecommitdiff
path: root/demos/device/keyboard
AgeCommit message (Collapse)Author
2013-11-01rename device projecthathach
2013-11-01rename device projecthathach
2013-11-01implement msc device classhathach
usbd auto stall control for not supported return from class control request usbd implement xfer isr callback mechanism DCD - implement dcd multiple qtd support - dcd dcd_pipe_stall - implement dcd_pipe_queue_xfer - xfer_complete_isr - flush control endpoint if received new setup while previous transfer is not complete change msc_cmd_block_wrapper_t flags field to dir force full speed for easy testing NOTEs: somehow unable to get endpoint IN interrupt with ioc
2013-10-30fix dcd_data declared with TUSB_CFG_ATTR_USBRAMhathach
fix lpc43xx UM: non-control unused endpoint type should be set to different than control in ENDPTCTRL add hid mouse device fix mouse descriptor with vertical wheel support
2013-10-29able to enumerate mouse + keyboard (missing timing at set configured though)hathach
2013-10-29change device driver init to open (when configured)hathach
fix HID_REQUEST_CONTROL_SET_REPORT handle
2013-10-29temporarily implementation of dcd_pipe_is_busyhathach
2013-10-29able to fully enumerated with keyboardhathach
2013-10-29implementing sw device stackhathach
2013-10-27make device keyboard buildable & runnable with ea4357hathach
2013-10-25more doxygen workhathach
rename tusb_mouse_report_t (keyboard) to hid_mouse_report_t (keyboard)
2013-10-24change TUSB_CFG_CONTROLLER0/1_MODE to TUSB_CFG_CONTROLLER_0/1_MODE for clearancehathach
adding configuration docs for tinyusb_config.h document HID mouse & keyboard API
2013-06-29test refractorhathach
2013-06-21[host lpc43xx] adding support for host custom classhathach
refractor usbh class driver indexing opt out periodic list code in EHCI (need to refractor/group later) [device lpc176x] rename dcd_endpoint_configure to dcd_pipe_open add usbd_pipe_open to manage pipe
2013-06-12add coreid to hidd_inithathach
temporarily implement hidd_init using dcd from lpc17xx add more test for dcd lp176x implement dcd_endpoint_configure
2013-06-12clean uphathach
2013-06-08ADDING LPC176X devicehathach
implementing dcd_lpc175x_6x.c add usbd_dcd.h add usbd_isr with TUSB_EVENT_SETUP_RECEIVED & TUSB_EVENT_BUS_RESET event parameterize TUSB_CFG_DEVICE_CONTROL_PACKET_SIZE (replace USB_MAX_PACKET0) --> able to get interrupt and receive setup packet, but SET ADDRESS (expected get device descriptor). uncomment write zero length will cause issue, no more interrupt ?
2013-06-04re-create ngx4330.hhathach
remove some rom driver dependency on upper layer introduce CAP_DEVICE_ROMDRIVER to overwrite TUSB_CFG_DEVICE_USE_ROM_DRIVER within the lib add support for lpc175x_6x - able to build and blink led on lpcxpresso1769 with device (without any class enabled)
2013-06-04add LPC175x_6x cmiss (got from xpresso example)hathach
add LPC175x_6x driver lib (got from http://git.lpcware.com//lpc175x_6x.git
2013-06-04rename tusb_device_is_configuredhathach
remove dcd_lpc18xx_lpc43xx.h and dcd_lpc11uxx_lpc13xx move define to hal
2013-06-03house keepinghathach
2013-06-03add TUSB_CFG_PROUDCT_ID checkhathach
move USB_MAX_EP_NUM to device dependency - lpc43 --> 6 - lpc11/13 --> 5
2013-06-03refractor device mouse main.c & tusbd_hid_mouse_send_reporthathach
2013-06-03refractor tusb_descriptorshathach
usbd device_class_driver added & tested HID mouse for device (work together with hid keyboard) rename DEVICE_ROM_REG_BASE, DEVICE_ROM_DRIVER_ADDR
2013-05-31refractor change tusbd_hid_keyboard_send_report APIhathach
2013-05-31refractor string descriptors, allow one-stop configure descriptor forhathach
- manufacturer, product etc ... (only english now)
2013-05-31refractor & beautify string descriptorshathach
2013-05-31clean up device main.c demo codehathach
2013-05-31rename descriptor variableshathach
2013-05-31change at86rf to 1ghznodehathach
rom device runs ok with lpc11uxx
2013-05-29keyboard example works with lpc1347 xpressohathach
2013-05-29fix lpcxpresso1347 board_ledshathach
temp change USBD_API to ROM_API add lpc13xx device support fix romdriver pointer able to init rom driver
2013-05-28rename NGX to ngxhathach
add a bunch of stub header for dcd (175x_6x, 13xx, 18xx_43xx) add dcd_nxp_romdriver for handling usb rom driver add BIT_TEST_ in binary.h remove mw_usbd_hid.h include due to lexical conflict
2013-05-25rename descriptor type, hid descriptor typehathach
2013-05-25add stub function to able to build device with EA4357hathach
- dcd_controller_reset - dcd_controller_connect
2013-05-23- move CMSIS & driver lib for lpc13u to codebase bsp/lpc13xxhathach
- change descriptor.c/h able to build device example
2013-05-06change format of file header & license spacinghathach
2013-03-25change website from tinyusb.net to tinyusb.orghathach
2013-02-05remove TUSB prefix for class enum definitionshathach
add most of HID USAGE TABLE and definitions etc ...
2013-01-26add more test code for keyboard hid application APIhathach
refractor, restructure, rename several thing regarding host, keyboard etc ...
2013-01-22start to supporthathach
- usbd host - osal some global define #define TUSB_CFG_HOST_CONTROLLER_NUM #define TUSB_CFG_HOST_DEVICE_MAX #define TUSB_CFG_CONFIGURATION_MAX rename & refractor HID type structure & enum use CException to test asssertion library add test for hid_host_keyboard with usbd configure get & osal queue get stubs update test for assertion library refractor ASSERT_STATUS in assertion library update tusb_error_t values rename usb basic type & enum in tusb_types.h and std_descriptors.h
2013-01-19change error type to lower case for more consistencyhathach
change Error Enum to TUSB prefix for more consistency start to add check for OS configure
2013-01-18add ASSERT POINTER supporthathach
add hid host and separate hid host & device update host project setting with EA4357 board add para checking test for hid host
2013-01-18add DEVICE_ROM_DRIVER_ADDR macro in hal to point to rom driver addhathach
add TUSB_ATTR_RAM_SECTION in tinyusb_config.h to abtract usb ram placement to application remove power_api.h (mcu dependency)
2013-01-17add UART support for ea4357 (tested)hathach
2013-01-17start to add bsp and build configuration for embedded artist 4357hathach
2013-01-17refractor board and start to add support for SWO retargethathach
2013-01-16add uart for lpc11uxx and retarget successfullyhathach
2013-01-15update project setting to have most warning option enable with simple switch ↵hathach
on/off (off for faster compiling time)
2013-01-11tested keyboard device with lpcXpresso1347 boardhathach
generated by cgit v1.3.1 (git 2.54.0) at 2026-08-28 00:32:04 +0000