summaryrefslogtreecommitdiff
path: root/examples/device/cdc_dual_ports
AgeCommit message (Collapse)Author
2026-04-26max32 change bulk endpoint to EP8,9 (2KB FIFO) and Audio ISO to EP10, 11 ↵hathach
(4KB FIFO)
2026-04-21replace `TUD_ENDPOINT_ONE_DIRECTION_ONLY` with ↵hathach
`CFG_TUD_ENDPOINT_ONE_DIRECTION_ONLY` for improved configuration consistency across examples and core sources
2026-03-12refactor(vendor/cdc): add CFG_TUD_CDC_RX_NEED_ZLP and CFG_TUD_VENDOR_RX_NEED_ZLPhathach
2026-03-12refactor(config): separate endpoint buffer sizes into RX and TX definitions ↵hathach
for clarity and flexibility
2026-02-28replace board_millis() with tusb_time_millis_api()hathach
2026-01-19example: update comment on CDC EP sizeZixun LI
Signed-off-by: Zixun LI <[email protected]>
2025-12-19clean up cmake, remove family_get_project_name()hathach
2025-11-21Also fix bDescriptorTypeHiFiPhile
Signed-off-by: HiFiPhile <[email protected]>
2025-11-21Fix in multiple example codes, wrong descriptor length was taken for ↵Thomas Rubin
tusb_desc_device_qualifier_t. Signed-off-by: Thomas Rubin <[email protected]>
2025-11-05added .clang-formathathach
fix more alerts disable IAR CStat since pvs-studio check is better integrated with clion
2025-10-28fix Identifiers that start with '__' or '_[A-Z]' are reserved.hathach
fix compiling with nuc family
2025-10-28fix descriptor warning when shifting zerohathach
2025-10-24fix several warningshathach
2025-10-14more make refactorhathach
2025-10-14move make.mk to hw/bsp/family_support.mkhathach
2025-09-17Fix board_reset_to_bootloaderHiFiPhile
Signed-off-by: HiFiPhile <[email protected]>
2025-09-17Fix board_init_after_tusbHiFiPhile
Signed-off-by: HiFiPhile <[email protected]>
2025-07-03update cdc_msc/cdc_msc_freertos to also support notificationhathach
2025-07-03make notify API and memory configurable with CFG_TUD_CDC_NOTIFYhathach
add tud_cdc_n_notify_conn_speed_change() add tud_cdc_notify_complete_cb()
2025-07-02Merge branch 'master' into fork/HiFiPhile/dcd_notifhathach
2025-02-09Add CMake presets.HiFiPhile
Signed-off-by: HiFiPhile <[email protected]>
2025-01-21bump up cmake min to 3.20hathach
2024-10-30Merge branch 'master' into dcd_notifHiFiPhile
Signed-off-by: HiFiPhile <[email protected]>
2024-10-14change the tusb_rhport_init_t struct, exclude the rhport to make API more ↵hathach
consistent
2024-10-11change tusb_init(), tusb_rhport_init() to use init struct for expandabilityhathach
2024-10-10add new tusb_int_handler(rhport, in_isr) as common irq handlerhathach
update tusb_init() to take rhport and role, defined as macro with optional argument for backward compatible
2024-10-10remove stm32f769disco since it is not reliablehathach
2024-08-19rename TUD_ENDPOINT_EXCLUSIVE_NUMBER to TUD_ENDPOINT_ONE_DIRECTION_ONLYhathach
2024-08-17define and use TUD_ENDPOINT_EXCLUSIVE_NUMBERhathach
2024-08-14Merge branch 'refs/heads/master' into fork/BrentK-ADI/max32_porthathach
2024-07-25Combined DCD MUSB implementationsBrent Kowal
Combined the new MAX32 MUSB implementation with the existing (TI) implementation to provide generic code base for working the MUSB DCD peripheral. - Added abstraction calls for FIFO setup, EP registers, Ctrl registers and interrupt setup. - Combined TM4C and MSP432E into a single header file. - Created musb_max32.h, and removed the MAX32 specific C implementation. - Updated MAX32 build system to use dcd_musb.c. - Added MAX32 conditions for cdc_dual_ports example descriptors missed during first testing.
2024-07-05add board_reset_to_bootloader(), try to implement that for ch32v203 but not ↵hathach
working yet
2024-04-26Add uart status notif to cdc_dual_ports example.HiFiPhile
2024-03-11add led blinky to cdc_dual_ports examplehathach
2023-11-23move make.mk and rules.mk to build_system/makehathach
2023-08-04update all examples to use unique ID as serial if avaialblehathach
2023-08-04Merge branch 'master' into enhance-bsphathach
2023-08-03rename hw/bsp/board.h to board_api.hhathach
2023-07-31enable USBMC for uno r4, add board_init_after_tusb() APIhathach
add BOARD_UPPERCASE for board detection
2023-06-27rework cmake with rtos support add RTOS to ↵hathach
family_configure_device/host/dual_example()
2023-05-06cmake work well with imxrthathach
2023-04-21update most examples cmake to build with imxrthathach
2023-03-17Merge branch 'master' into portabilityhathach
2023-03-17fix trailing space and new linehathach
temporarily disable codespell
2023-03-06integrate top.mk into make.mkhathach
2022-11-30Add FT9xx for cdc_dual_portsGordon McNab
Fix handling of interrupt endpoints. i.e. no ZLPs. Fix the assignation of endpoint types. Add button support for MM900evx boards. On board support do not block for UART input.
2022-11-29Fix transfers issues with FT9xxGordon McNab
Correct USB FIFO use for setup data phases (OUT transfers). We cannot stop traffic on the control endpoint so we set a flag and pull data from host when tinyUSB requests it from the USB FIFO. Extend this for all endpoints although currently not required. Rename all instances of ft90x which can apply to ft93x as ft9xx. Add support for the cdc_dual_ports example for ft9xx. Add LED pin definition for board LED in a simple to access place on the Bridgetek MM900EVx boards.
2022-11-28Fix issue with the CDC SetLineCoding requestGordon McNab
The SetLineCoding would fail as host would send the SETUP OUT phase before tinyUSB had setup a transaction for it. ft9xx port would ignore the transfer since there was no valid transaction setup for it. One SETUP data phase packet is cached now.
2022-09-13Remove unreachable codeBen Avison
IAR generates warning Pe111 'statement is unreachable'. In a couple of cases, replace return statements with TU_ATTR_FALLTHROUGH; because some compilers apparently can't figure out that the return statements are unreachable but do whinge about an imagined fall-through without them!
2022-07-12RP@040: rework CMake for compiler warningsgraham sanderson
generated by cgit v1.3.1 (git 2.54.0) at 2026-09-04 23:53:13 +0000