| Age | Commit message (Collapse) | Author |
|---|
|
Class drivers: skip and account the SS endpoint companion descriptor in
every descriptor walk (hid, midi, midi2, ecm_rndis, printer, mtp, usbtmc),
via a shared usbd_skip_ss_ep_companion() helper in usbd_pvt.h (cdc/ncm
already handled; vendor/dfu naturally tolerant). usbtmc buffer grows to
1024 at SS to satisfy its packet-multiple assert. bth/audio/video are left
FS/HS-only (ISO-centric; ISO is unsupported on the CH569 dcd).
usbd.h: new SS template macros TUD_HID_SS_DESCRIPTOR(+INOUT),
TUD_MIDI_SS_DESCRIPTOR (+ DESC_EP_SS part), TUD_MIDI2_DESC_ALT1_EP_SS,
TUD_PRINTER_SS_DESCRIPTOR, TUD_MTP_SS_DESCRIPTOR,
TUD_USBTMC_BULK_SS_DESCRIPTORS/INT_SS_DESCRIPTOR, with _SS_DESC_LEN
counterparts (bulk endpoints hardcode 1024, companion after every EP).
Examples: 17 bulk/interrupt examples gain the full SS descriptor set
(EP0 512/64 clamp, SS device descriptor bcdUSB 3.20 mps0=2^9, SS config
with companions, BOS caps, speed-switched callbacks): cdc_dual_ports,
cdc_msc_freertos, dfu, dfu_runtime, dynamic_configuration,
hid_boot_interface, hid_composite(+freertos), hid_generic_inout,
hid_multiple_interface, midi_test(+freertos), midi2_device, msc_dual_lun,
mtp, printer_to_cdc, usbtmc, webusb_serial. msc_dual_lun is un-skipped for
CH569 using read-only flash disks (16KB RAM can't hold two 8KB RAM disks,
same as ch32v10x/v20x boards).
Validation: full example sweep green for hydrausb3_v1 (SPEED=super, 19
device ELFs) and raspberry_pi_pico; wTotalLength == sizeof() verified for
every SS configuration array in the built ELFs; ceedling 65/65;
pre-commit clean; code-size delta +0.0% on rp2040 (SS code folds out on
non-SS builds).
Co-Authored-By: Claude Fable 5 <[email protected]>
Claude-Session: https://claude.ai/code/session_019MRGjBT2NBkCoWwyDT4LaE
|
|
Documentation tooling:
- Add the `build-doc` skill and `tools/build_doc.py` wrapper for local
Sphinx builds (clean / -W / open).
- Enable Markdown (MyST) in conf.py and auto-collect
examples/{device,host,dual}/*/README.md into a 3-level Examples nav
(Examples > Device/Host/Dual > example), noting each page's source
location and normalizing headings to a single H1.
- Remove the stale `.claude/commands/build-doc.md`; point the AGENTS.md
Documentation section at the skill.
Example docs:
- Add a README.md for every device/host/dual example: what it does, USB
interface table, notable tusb_config.h settings, generic CMake + Make
build steps, and how to try it.
- Fold each *_freertos variant into its base README, noting the FreeRTOS
source path and any RTOS-specific behavior.
Generated docs/examples/ output is git-ignored. Builds clean with
`sphinx-build -W`.
Co-Authored-By: Claude Opus 4.8 (1M context) <[email protected]>
|
|
`CFG_TUD_ENDPOINT_ONE_DIRECTION_ONLY` for improved configuration consistency across examples and core sources
|
|
|
|
|
|
|
|
fix more alerts
disable IAR CStat since pvs-studio check is better integrated with clion
|
|
fix compiling with nuc family
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Signed-off-by: HiFiPhile <[email protected]>
|
|
|
|
|
|
Signed-off-by: HiFiPhile <[email protected]>
|
|
|
|
consistent
|
|
|
|
update tusb_init() to take rhport and role, defined as macro with optional argument for backward compatible
|
|
|
|
|
|
|
|
-Added support for MAX78002, MAX78002EVKIT
-Added provisions for remaining MAX32 USB parts
|
|
Initial commit for the port of TUSB to MAX32xxx parts, staring with MAX32690
- Added dcd_max32.c (based on dcd_musb.c) for interfacing with the peripheral
- Added MAX32690 part family support
- Added max32690evkit board support
- Updated examples for unique EP number requirement
- Updated get_deps.py to fetch the MSDK
Known Issues / Additional Testing Required
- msc_dual_lun only shown 1 volume on Windows
- USBTMC does not have a valid Windowsdriver
- DFU does not have a valid Windows driver
- WebUSB is "Device not Recognized"
- Need to test build scripts with IAR and Clang
|
|
|
|
test run locally well
|
|
|
|
Invoke unmounted state on configuration reset
|
|
|
|
|
|
|
|
|
|
add BOARD_UPPERCASE for board detection
|
|
family_configure_device/host/dual_example()
|
|
|
|
|
|
|
|
temporarily disable codespell
|
|
|
|
|
|
IAR generates warning Pe111 'statement is unreachable'. In a couple of
cases, replace return statements with TU_ATTR_FALLTHROUGH; because some
compilers apparently can't figure out that the return statements are
unreachable but do whinge about an imagined fall-through without them!
|
|
|
|
|
|
exmaples
|
|
|
|
- BOARD_DEVICE/HOST_RHPORT_NUM to BOARD_TUD/H_RHPORT
- BOARD_DEVICE/HOST_RHPORT_SPEED to BOARD_TUD/H_MAX_SPEED
|
|
|
