| Age | Commit message (Collapse) | Author | |
|---|---|---|---|
| 2026-07-07 | Add SuperSpeed descriptors to all bulk/interrupt class drivers and examples | hathach | |
| Class drivers: skip and account the SS endpoint companion descriptor in every descriptor walk (hid, midi, midi2, ecm_rndis, printer, mtp, usbtmc), via a shared usbd_skip_ss_ep_companion() helper in usbd_pvt.h (cdc/ncm already handled; vendor/dfu naturally tolerant). usbtmc buffer grows to 1024 at SS to satisfy its packet-multiple assert. bth/audio/video are left FS/HS-only (ISO-centric; ISO is unsupported on the CH569 dcd). usbd.h: new SS template macros TUD_HID_SS_DESCRIPTOR(+INOUT), TUD_MIDI_SS_DESCRIPTOR (+ DESC_EP_SS part), TUD_MIDI2_DESC_ALT1_EP_SS, TUD_PRINTER_SS_DESCRIPTOR, TUD_MTP_SS_DESCRIPTOR, TUD_USBTMC_BULK_SS_DESCRIPTORS/INT_SS_DESCRIPTOR, with _SS_DESC_LEN counterparts (bulk endpoints hardcode 1024, companion after every EP). Examples: 17 bulk/interrupt examples gain the full SS descriptor set (EP0 512/64 clamp, SS device descriptor bcdUSB 3.20 mps0=2^9, SS config with companions, BOS caps, speed-switched callbacks): cdc_dual_ports, cdc_msc_freertos, dfu, dfu_runtime, dynamic_configuration, hid_boot_interface, hid_composite(+freertos), hid_generic_inout, hid_multiple_interface, midi_test(+freertos), midi2_device, msc_dual_lun, mtp, printer_to_cdc, usbtmc, webusb_serial. msc_dual_lun is un-skipped for CH569 using read-only flash disks (16KB RAM can't hold two 8KB RAM disks, same as ch32v10x/v20x boards). Validation: full example sweep green for hydrausb3_v1 (SPEED=super, 19 device ELFs) and raspberry_pi_pico; wTotalLength == sizeof() verified for every SS configuration array in the built ELFs; ceedling 65/65; pre-commit clean; code-size delta +0.0% on rp2040 (SS code folds out on non-SS builds). Co-Authored-By: Claude Fable 5 <[email protected]> Claude-Session: https://claude.ai/code/session_019MRGjBT2NBkCoWwyDT4LaE | |||
| 2026-07-03 | fix HID_STACK_SIZE typo | HiFiPhile | |
| Signed-off-by: HiFiPhile <[email protected]> | |||
| 2025-10-30 | Merge pull request #3271 from karlp/pr/examplesd-freertos-stacks | Ha Thach | |
| examples/device/*_freertos: expand stack size when needed | |||
| 2025-10-30 | increase freertos stack size when debug is enabled | hathach | |
| 2025-10-28 | fix Identifiers that start with '__' or '_[A-Z]' are reserved. | hathach | |
| fix compiling with nuc family | |||
| 2025-10-28 | fix descriptor warning when shifting zero | hathach | |
| 2025-10-24 | fix several warnings | hathach | |
| 2025-10-02 | fix typos | hathach | |
| 2025-10-01 | examples/device/*_freertos: expand stack size when needed | Karl Palsson | |
| All four of these examples immediately crashed on stack overflow when connected, at least on a FRDM_K64F board. In 46fd82299040f the default freertos stack size was increased, but _only_ for stm32? Perhaps either all platform examples need the default increased, rather than increasing the problem task stacks as is done here. Signed-off-by: Karl Palsson <[email protected]> | |||
| 2025-09-17 | Fix board_init_after_tusb | HiFiPhile | |
| Signed-off-by: HiFiPhile <[email protected]> | |||
| 2025-07-02 | update esp build, replace TUSB_MCU_VENDOR_ESPRESSIF by ESP_PLATFORM | hathach | |
| 2025-02-11 | update make to use FreeRTOSConfig in family instead of examples | hathach | |
| 2024-11-21 | - move freertos_hooks to board.c | hathach | |
| - add device/midi_test_freertos example - update bth/dfu/midi device for cache line size | |||
| 2024-10-15 | move core init code to dwc2 common. update/correct build for esppressif | hathach | |
| 2024-10-14 | change the tusb_rhport_init_t struct, exclude the rhport to make API more ↵ | hathach | |
| consistent | |||
| 2024-10-11 | change tusb_init(), tusb_rhport_init() to use init struct for expandability | hathach | |
| 2024-10-10 | add new tusb_int_handler(rhport, in_isr) as common irq handler | hathach | |
| update tusb_init() to take rhport and role, defined as macro with optional argument for backward compatible | |||
| 2024-06-27 | Make FreeRTOS config work with Cortex-M33. | HiFiPhile | |
| 2024-04-25 | adding support for esp32 for use with max3421e host | hathach | |
| 2024-04-09 | Renesas RX controllers: Recover the previous state of the system write ↵ | Matthias Schär | |
| protect register in functions that are called within init-code | |||
| 2024-04-09 | Revert "Fixed behavior of the PRCR register. Previous write protection will ↵ | Matthias Schär | |
| be recovered." This reverts commit 4d7296109e31690972d8cf09e6138131938cb0ed. | |||
| 2024-04-09 | Fixed behavior of the PRCR register. Previous write protection will be ↵ | Matthias Schär | |
| recovered. | |||
| 2023-12-18 | update FreeRTOSConfig.h | hathach | |
| - remove configAssert() - configCHECK_HANDLER_INSTALLATION=0 (to prevent unused-parameter error with configAssert(x)=nil | |||
| 2023-08-09 | Merge pull request #2202 from Rocky04/patch-4 | Ha Thach | |
| Invoke unmounted state on configuration reset | |||
| 2023-08-07 | Fixed typo | Rocky04 | |
| 2023-08-07 | Update examples | Rocky04 | |
| 2023-08-04 | update all examples to use unique ID as serial if avaialble | hathach | |
| 2023-08-04 | Merge branch 'master' into enhance-bsp | hathach | |
| 2023-08-03 | Merge pull request #2052 from arduino/renesas_ra_hs_rebased | Ha Thach | |
| Renesas_RA: add support for board with HS USB port | |||
| 2023-08-03 | rename hw/bsp/board.h to board_api.h | hathach | |
| 2023-08-03 | add osal queue name if needed | hathach | |
| also mass change configQUEUE_REGISTRY_SIZE = 4 | |||
| 2023-07-31 | enable USBMC for uno r4, add board_init_after_tusb() API | hathach | |
| add BOARD_UPPERCASE for board detection | |||
| 2023-03-30 | more esp32 cmake clean up | hathach | |
| 2023-03-30 | update all cmake for esp32 build | hathach | |
| 2023-03-17 | fix trailing space and new line | hathach | |
| temporarily disable codespell | |||
| 2023-02-04 | change length in tud_hid_report_complete_cb() from uint8 to uint16 | hathach | |
| 2023-01-30 | hardcoded configPRIO_BITS for IAR build to pass CI | hathach | |
| 2023-01-17 | update freertos example to build with iar | hathach | |
| 2022-12-05 | clean osal_freertos, update freertos examples to work with ↵ | hathach | |
| configSUPPORT_DYNAMIC_ALLOCATION only note: for example to build with configSUPPORT_STATIC_ALLOCATION = 0, one of heap_n.c must be included in makefile/cmake | |||
| 2022-07-17 | temporarily revert len back to uint8_t in tud_hid_report_complete_cb() for ↵ | hathach | |
| up coming release | |||
| 2022-06-27 | Merge branch 'master' into add-more-warnings | hathach | |
| 2022-06-27 | change report len in hid API from uint8_t to uint16_t | hathach | |
| since HS interrupt endpoint can be up to 1024, 8-bit is not enough. affected APIs are: - tud_hid_n_report() / tud_hid_report() - tud_hid_report_complete_cb() | |||
| 2022-06-27 | fix most warnings with rp2040 -wconversion | hathach | |
| 2022-06-06 | more example update | hathach | |
| 2022-06-01 | rename board specific macro for example | hathach | |
| - BOARD_DEVICE/HOST_RHPORT_NUM to BOARD_TUD/H_RHPORT - BOARD_DEVICE/HOST_RHPORT_SPEED to BOARD_TUD/H_MAX_SPEED | |||
| 2022-04-20 | add note for tud_task() behavior in freertos example | hathach | |
| 2022-03-04 | fix build with esp32s2, also use dwc2 for esp example | hathach | |
| 2022-02-25 | auto detect max rhport speed based on mcu | hathach | |
| 2022-02-18 | fix build with latest esp idf | hathach | |
| 2021-11-29 | use 4k stack for example with esp32sx | hathach | |
 |
index : tinyusb.git | |
| Unnamed repository; edit this file 'description' to name the repository. |
| summaryrefslogtreecommitdiff |