| Age | Commit message (Collapse) | Author |
|---|
|
Nine examples/host/*/only.txt gate on family:samd21, but 2a8811ebb merged the
samd2x and saml2x BSPs into hw/bsp/samd2x_l2x. skip_example takes `family:` from
the directory name, so since that rename every one of these examples has been
skipped on every board of the family, under make as well as cmake - although
hw/bsp/samd2x_l2x/family.cmake wires src/portable/microchip/samd/hcd_samd.c.
107 host firmware images were being compiled nowhere.
The merged family is wider than the old samd21 one, so three boards need an
explicit skip rather than the rename alone:
atsaml21_xpro, saml22_feather, sensorwatch_m0 - not samd21, so hcd_samd.c is
not compiled for them (previous commit); SAML22 has no host controller at all
curiosity_nano - SAMD21 with 16 KB RAM; msc_file_explorer_freertos overflows it
by 3688 bytes (ram 122.51%). Only that one example; the other eight fit.
Verified across the whole family: cmake 11 boards x 9/9 examples + curiosity_nano
8/9, three boards skipped, 0 failures; make 98 OK / 0 failed (was 98/9 before).
Device examples on saml21 and saml22 are unaffected.
|
|
Complete the khci -> chipidea ci_fs migration that was started for device
(commit d70403f1f "host is not yet"):
- device: switch kinetis_k/kl/k32l (Makefiles + k32l CMake) to dcd_ci_fs.c
- host: add hcd_ci_fs.c (port of hcd_khci.c onto ci_fs_regs_t) and switch all
Kinetis families to it; remove src/portable/nxp/khci entirely
- enable host examples (device_info, cdc_msc_hid) for mcu:KINETIS_K
- README: merge the KL and K32L2 rows into a single "KL, K32L" ci_fs row
hcd_ci_fs.c also fixes two pre-existing host bugs found via HIL on frdm_k64f
(present in the old hcd_khci.c too):
- data toggle was flipped on a NAK in suspend_transfer; a NAK transfers no
data so the toggle must be preserved, else the retried bulk packet is
silently discarded by the device (MSC CBW/CSW hang). See comment in file.
- prepare_packets asserted and dropped a transfer when the single shared BDT
was still owned by an in-flight transfer under concurrent activity; now it
returns busy and resume_transfer defers/retries on the next SOF.
HIL verified on frdm_k64f: device 13/13, host cdc_msc_hid (CDC mount + echo +
MSC mount, through a hub).
Co-Authored-By: Claude Opus 4.8 (1M context) <[email protected]>
Claude-Session: https://claude.ai/code/session_01ExGPLP5eU43LR7o6yYLpNi
|
|
Signed-off-by: HiFiPHile <[email protected]>
|
|
Signed-off-by: HiFiPhile <[email protected]>
|
|
Signed-off-by: HiFiPhile <[email protected]>
|
|
Signed-off-by: Zixun LI <[email protected]>
|
|
Signed-off-by: Zhihong Chen <[email protected]>
|
|
|
|
- Added `rw61x` family support.
- Added `frdm_rw612` board support.
- Update `get_deps.py` to include mcux-sdk for RW61x.
- Add ci_hs_rw61x include to ChipIdea HS driver and enable host examples.
|
|
Signed-off-by: HiFiPhile <[email protected]>
|
|
Signed-off-by: HiFiPhile <[email protected]>
|
|
Signed-off-by: HiFiPhile <[email protected]>
|
|
Signed-off-by: HiFiPhile <[email protected]>
|
|
enable host example build for samd21/d51
|
|
|
|
|
|
|
|
Signed-off-by: HiFiPhile <[email protected]>
|
|
|
|
|
|
|
|
change tuh_int_handler() to take in_isr as optional parameter (default =
true)
|
|
'MAX3421_HOST=1' must be added as part of make/cmake command
|
|
|
|
fix build util with makefile
|
|
|
|
|
|
update comment for unit not ready 3a-00 additional sense
|
|
And switch to a single file that can include mcu, family or board.
|
