| Age | Commit message (Collapse) | Author |
|---|
|
Removing the obsolete host vendor driver also dropped the `#define CFG_TUH_VENDOR 0`
line from the six example configs that carried it. Put it back: host vendor is
coming, and the configs are where a reader looks for the set of host classes an
example can turn on.
Restored byte-identical to the pre-removal state, each file keeping its own column
alignment. The define is inert today - nothing under src/, hw/ or tools/ reads
CFG_TUH_VENDOR - and it is 0 everywhere, so ci_select still reads the vendor class
as enabled by no example and a change to it still selects nothing.
Note the option's default in src/tusb_option.h is still gone; implementing the
driver will need that back alongside the usbh driver-table entry.
|
|
Nine examples/host/*/only.txt gate on family:samd21, but 2a8811ebb merged the
samd2x and saml2x BSPs into hw/bsp/samd2x_l2x. skip_example takes `family:` from
the directory name, so since that rename every one of these examples has been
skipped on every board of the family, under make as well as cmake - although
hw/bsp/samd2x_l2x/family.cmake wires src/portable/microchip/samd/hcd_samd.c.
107 host firmware images were being compiled nowhere.
The merged family is wider than the old samd21 one, so three boards need an
explicit skip rather than the rename alone:
atsaml21_xpro, saml22_feather, sensorwatch_m0 - not samd21, so hcd_samd.c is
not compiled for them (previous commit); SAML22 has no host controller at all
curiosity_nano - SAMD21 with 16 KB RAM; msc_file_explorer_freertos overflows it
by 3688 bytes (ram 122.51%). Only that one example; the other eight fit.
Verified across the whole family: cmake 11 boards x 9/9 examples + curiosity_nano
8/9, three boards skipped, 0 failures; make 98 OK / 0 failed (was 98/9 before).
Device examples on saml21 and saml22 are unaffected.
|
|
vendor_host.c/.h implemented a CFG_TUH_VENDOR class driver that no example, board
or test ever enabled: usbh's driver table entry was compiled out everywhere, and
the six tusb_config.h files that mentioned the macro all set it to 0. Maintainer
call - dead code, not a shrinking of supported classes.
Removes the sources, the usbh driver-table entry, the CFG_TUH_VENDOR default in
tusb_option.h, the tusb.h include, both build-system source lists, the rp2040
family.cmake entry and the IAR project template rows.
|
|
Complete the khci -> chipidea ci_fs migration that was started for device
(commit d70403f1f "host is not yet"):
- device: switch kinetis_k/kl/k32l (Makefiles + k32l CMake) to dcd_ci_fs.c
- host: add hcd_ci_fs.c (port of hcd_khci.c onto ci_fs_regs_t) and switch all
Kinetis families to it; remove src/portable/nxp/khci entirely
- enable host examples (device_info, cdc_msc_hid) for mcu:KINETIS_K
- README: merge the KL and K32L2 rows into a single "KL, K32L" ci_fs row
hcd_ci_fs.c also fixes two pre-existing host bugs found via HIL on frdm_k64f
(present in the old hcd_khci.c too):
- data toggle was flipped on a NAK in suspend_transfer; a NAK transfers no
data so the toggle must be preserved, else the retried bulk packet is
silently discarded by the device (MSC CBW/CSW hang). See comment in file.
- prepare_packets asserted and dropped a transfer when the single shared BDT
was still owned by an in-flight transfer under concurrent activity; now it
returns busy and resume_transfer defers/retries on the next SOF.
HIL verified on frdm_k64f: device 13/13, host cdc_msc_hid (CDC mount + echo +
MSC mount, through a hub).
Co-Authored-By: Claude Opus 4.8 (1M context) <[email protected]>
Claude-Session: https://claude.ai/code/session_01ExGPLP5eU43LR7o6yYLpNi
|
|
- Order CFG_TUH_DEVICE_MAX before CFG_TUH_HID in the host config snippets
(cdc_msc_hid, hid_controller) so the documented snippet has no forward
macro reference when copied into tusb_config.h.
- Fix stale `examples.rst` references: the generator now writes per-group
`docs/examples/<group>/index.rst` pages, so update the conf.py comment and
the build-doc SKILL.md accordingly.
Co-Authored-By: Claude Opus 4.8 (1M context) <[email protected]>
|
|
Documentation tooling:
- Add the `build-doc` skill and `tools/build_doc.py` wrapper for local
Sphinx builds (clean / -W / open).
- Enable Markdown (MyST) in conf.py and auto-collect
examples/{device,host,dual}/*/README.md into a 3-level Examples nav
(Examples > Device/Host/Dual > example), noting each page's source
location and normalizing headings to a single H1.
- Remove the stale `.claude/commands/build-doc.md`; point the AGENTS.md
Documentation section at the skill.
Example docs:
- Add a README.md for every device/host/dual example: what it does, USB
interface table, notable tusb_config.h settings, generic CMake + Make
build steps, and how to try it.
- Fold each *_freertos variant into its base README, noting the FreeRTOS
source path and any RTOS-specific behavior.
Generated docs/examples/ output is git-ignored. Builds clean with
`sphinx-build -W`.
Co-Authored-By: Claude Opus 4.8 (1M context) <[email protected]>
|
|
# Conflicts:
# README.rst
|
|
task is blocking
|
|
Signed-off-by: HiFiPHile <[email protected]>
|
|
|
|
|
|
to prevent xfer is ack while stopping.
|
|
|
|
Signed-off-by: HiFiPhile <[email protected]>
|
|
Signed-off-by: HiFiPhile <[email protected]>
|
|
|
|
|
|
Signed-off-by: HiFiPhile <[email protected]>
|
|
Signed-off-by: Zixun LI <[email protected]>
|
|
Signed-off-by: Zhihong Chen <[email protected]>
|
|
|
|
- Added `rw61x` family support.
- Added `frdm_rw612` board support.
- Update `get_deps.py` to include mcux-sdk for RW61x.
- Add ci_hs_rw61x include to ChipIdea HS driver and enable host examples.
|
|
Signed-off-by: HiFiPhile <[email protected]>
|
|
Signed-off-by: HiFiPhile <[email protected]>
|
|
Signed-off-by: HiFiPhile <[email protected]>
|
|
Signed-off-by: HiFiPhile <[email protected]>
|
|
|
|
not defined
|
|
fix compiling with nuc family
|
|
|
|
|
|
|
|
Signed-off-by: HiFiPhile <[email protected]>
|
|
enable host example build for samd21/d51
|
|
|
|
|
|
|
|
|
|
|
|
failed.
driver_process_set_config() also pass drv index with user_data
|
|
# Conflicts:
# README.rst
# docs/reference/index.rst
# src/class/cdc/cdc_device.c
# src/class/cdc/cdc_host.c
|
|
|
|
|
|
|
|
|
|
hcd_bus_info_get
streamline bus info to usbh_devies, also replace dev0 (renamed to dev0_bus)
|
|
Signed-off-by: HiFiPhile <[email protected]>
|
|
|
|
RP2040 MIDI Host
|
|
|
