| Age | Commit message (Collapse) | Author |
|---|
|
Removing the obsolete host vendor driver also dropped the `#define CFG_TUH_VENDOR 0`
line from the six example configs that carried it. Put it back: host vendor is
coming, and the configs are where a reader looks for the set of host classes an
example can turn on.
Restored byte-identical to the pre-removal state, each file keeping its own column
alignment. The define is inert today - nothing under src/, hw/ or tools/ reads
CFG_TUH_VENDOR - and it is 0 everywhere, so ci_select still reads the vendor class
as enabled by no example and a change to it still selects nothing.
Note the option's default in src/tusb_option.h is still gone; implementing the
driver will need that back alongside the usbh driver-table entry.
|
|
Nine examples/host/*/only.txt gate on family:samd21, but 2a8811ebb merged the
samd2x and saml2x BSPs into hw/bsp/samd2x_l2x. skip_example takes `family:` from
the directory name, so since that rename every one of these examples has been
skipped on every board of the family, under make as well as cmake - although
hw/bsp/samd2x_l2x/family.cmake wires src/portable/microchip/samd/hcd_samd.c.
107 host firmware images were being compiled nowhere.
The merged family is wider than the old samd21 one, so three boards need an
explicit skip rather than the rename alone:
atsaml21_xpro, saml22_feather, sensorwatch_m0 - not samd21, so hcd_samd.c is
not compiled for them (previous commit); SAML22 has no host controller at all
curiosity_nano - SAMD21 with 16 KB RAM; msc_file_explorer_freertos overflows it
by 3688 bytes (ram 122.51%). Only that one example; the other eight fit.
Verified across the whole family: cmake 11 boards x 9/9 examples + curiosity_nano
8/9, three boards skipped, 0 failures; make 98 OK / 0 failed (was 98/9 before).
Device examples on saml21 and saml22 are unaffected.
|
|
vendor_host.c/.h implemented a CFG_TUH_VENDOR class driver that no example, board
or test ever enabled: usbh's driver table entry was compiled out everywhere, and
the six tusb_config.h files that mentioned the macro all set it to 0. Maintainer
call - dead code, not a shrinking of supported classes.
Removes the sources, the usbh driver-table entry, the CFG_TUH_VENDOR default in
tusb_option.h, the tusb.h include, both build-system source lists, the rp2040
family.cmake entry and the IAR project template rows.
|
|
- Order CFG_TUH_DEVICE_MAX before CFG_TUH_HID in the host config snippets
(cdc_msc_hid, hid_controller) so the documented snippet has no forward
macro reference when copied into tusb_config.h.
- Fix stale `examples.rst` references: the generator now writes per-group
`docs/examples/<group>/index.rst` pages, so update the conf.py comment and
the build-doc SKILL.md accordingly.
Co-Authored-By: Claude Opus 4.8 (1M context) <[email protected]>
|
|
Documentation tooling:
- Add the `build-doc` skill and `tools/build_doc.py` wrapper for local
Sphinx builds (clean / -W / open).
- Enable Markdown (MyST) in conf.py and auto-collect
examples/{device,host,dual}/*/README.md into a 3-level Examples nav
(Examples > Device/Host/Dual > example), noting each page's source
location and normalizing headings to a single H1.
- Remove the stale `.claude/commands/build-doc.md`; point the AGENTS.md
Documentation section at the skill.
Example docs:
- Add a README.md for every device/host/dual example: what it does, USB
interface table, notable tusb_config.h settings, generic CMake + Make
build steps, and how to try it.
- Fold each *_freertos variant into its base README, noting the FreeRTOS
source path and any RTOS-specific behavior.
Generated docs/examples/ output is git-ignored. Builds clean with
`sphinx-build -W`.
Co-Authored-By: Claude Opus 4.8 (1M context) <[email protected]>
|
|
Signed-off-by: HiFiPhile <[email protected]>
|
|
Signed-off-by: HiFiPhile <[email protected]>
|
|
|
|
|
|
Signed-off-by: HiFiPhile <[email protected]>
|
|
Signed-off-by: Zixun LI <[email protected]>
|
|
Signed-off-by: Zhihong Chen <[email protected]>
|
|
|
|
- Added `rw61x` family support.
- Added `frdm_rw612` board support.
- Update `get_deps.py` to include mcux-sdk for RW61x.
- Add ci_hs_rw61x include to ChipIdea HS driver and enable host examples.
|
|
Signed-off-by: HiFiPhile <[email protected]>
|
|
Signed-off-by: HiFiPhile <[email protected]>
|
|
Signed-off-by: HiFiPhile <[email protected]>
|
|
not defined
|
|
fix compiling with nuc family
|
|
|
|
|
|
|
|
Signed-off-by: HiFiPhile <[email protected]>
|
|
enable host example build for samd21/d51
|
|
|
|
|
|
|
|
Signed-off-by: HiFiPhile <[email protected]>
|
|
|
|
|
|
Signed-off-by: HiFiPhile <[email protected]>
|
|
|
|
|
|
consistent
|
|
|
|
update tusb_init() to take rhport and role, defined as macro with optional argument for backward compatible
|
|
|
|
|
|
- fix warnings build hcd max3421 with rp2040
- add tinyusb_host_max3421 target for rp2040 cmake, -DMAX3421_HOST=1
will enable this
- add max3421 driver implementation for rp2040 family
- update tusb_config for host to allow easy enable host selection for
rp2040 (default/pio-usb/max3421)
|
|
|
|
|
|
|
|
change tuh_int_handler() to take in_isr as optional parameter (default =
true)
|
|
|
|
'MAX3421_HOST=1' must be added as part of make/cmake command
|
|
Fix build issues when building for RP2040 from pico-examples/pico-sdk.
|
|
|
|
|
|
add BOARD_UPPERCASE for board detection
|
|
* include_guard requires GLOBAL as family.cmake is included in multiple non child places
* the following recently added check is suprfluous (family_configure_host_example for rp2040 should do this already),
and breaks if pico_pio_usb is not avaialble, so i have removed
# Add pico-pio-usb for rp2040 since user can choose to run on bit-banging host
if(FAMILY STREQUAL "rp2040")
family_add_pico_pio_usb(${PROJECT})
endif()
* added new familt_example_missing_dependency functino to print missing dependency warning, so
pico-examples can override it to be less in your face, and also more contextual to pico-examples
|
