| Age | Commit message (Collapse) | Author |
|---|
|
Removing the obsolete host vendor driver also dropped the `#define CFG_TUH_VENDOR 0`
line from the six example configs that carried it. Put it back: host vendor is
coming, and the configs are where a reader looks for the set of host classes an
example can turn on.
Restored byte-identical to the pre-removal state, each file keeping its own column
alignment. The define is inert today - nothing under src/, hw/ or tools/ reads
CFG_TUH_VENDOR - and it is 0 everywhere, so ci_select still reads the vendor class
as enabled by no example and a change to it still selects nothing.
Note the option's default in src/tusb_option.h is still gone; implementing the
driver will need that back alongside the usbh driver-table entry.
|
|
Nine examples/host/*/only.txt gate on family:samd21, but 2a8811ebb merged the
samd2x and saml2x BSPs into hw/bsp/samd2x_l2x. skip_example takes `family:` from
the directory name, so since that rename every one of these examples has been
skipped on every board of the family, under make as well as cmake - although
hw/bsp/samd2x_l2x/family.cmake wires src/portable/microchip/samd/hcd_samd.c.
107 host firmware images were being compiled nowhere.
The merged family is wider than the old samd21 one, so three boards need an
explicit skip rather than the rename alone:
atsaml21_xpro, saml22_feather, sensorwatch_m0 - not samd21, so hcd_samd.c is
not compiled for them (previous commit); SAML22 has no host controller at all
curiosity_nano - SAMD21 with 16 KB RAM; msc_file_explorer_freertos overflows it
by 3688 bytes (ram 122.51%). Only that one example; the other eight fit.
Verified across the whole family: cmake 11 boards x 9/9 examples + curiosity_nano
8/9, three boards skipped, 0 failures; make 98 OK / 0 failed (was 98/9 before).
Device examples on saml21 and saml22 are unaffected.
|
|
vendor_host.c/.h implemented a CFG_TUH_VENDOR class driver that no example, board
or test ever enabled: usbh's driver table entry was compiled out everywhere, and
the six tusb_config.h files that mentioned the macro all set it to 0. Maintainer
call - dead code, not a shrinking of supported classes.
Removes the sources, the usbh driver-table entry, the CFG_TUH_VENDOR default in
tusb_option.h, the tusb.h include, both build-system source lists, the rp2040
family.cmake entry and the IAR project template rows.
|
|
Documentation tooling:
- Add the `build-doc` skill and `tools/build_doc.py` wrapper for local
Sphinx builds (clean / -W / open).
- Enable Markdown (MyST) in conf.py and auto-collect
examples/{device,host,dual}/*/README.md into a 3-level Examples nav
(Examples > Device/Host/Dual > example), noting each page's source
location and normalizing headings to a single H1.
- Remove the stale `.claude/commands/build-doc.md`; point the AGENTS.md
Documentation section at the skill.
Example docs:
- Add a README.md for every device/host/dual example: what it does, USB
interface table, notable tusb_config.h settings, generic CMake + Make
build steps, and how to try it.
- Fold each *_freertos variant into its base README, noting the FreeRTOS
source path and any RTOS-specific behavior.
Generated docs/examples/ output is git-ignored. Builds clean with
`sphinx-build -W`.
Co-Authored-By: Claude Opus 4.8 (1M context) <[email protected]>
|
|
Signed-off-by: HiFiPHile <[email protected]>
|
|
|
|
WARN_FLAGS to tinyusb sources and examples sources only (skip 3rd party library and mcu vendor)
|
|
IAR is only supported with CMake. Remove all IAR-specific references
from the Make build system including toolchain files, SRC_S_IAR,
LD_FILE_IAR variables, and IAR toolchain detection.
Also fix GET_SECTOR_COUNT truncation in msc_file_explorer and
broken formatting in stm32f7 board_uart_write.
Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]>
|
|
Update FatFS to R0.16
|
|
|
|
- Add lib/fatfs to deps_mandatory in get_deps.py, pinned to R0.16
(commit 30ca13c6) from github.com/abbrev/fatfs mirror
- Move TinyUSB custom ffconf.h to examples/host/msc_file_explorer/src/
with project-specific settings: FF_CODE_PAGE=437, FF_USE_LFN=1,
FF_FS_RPATH=2, FF_VOLUMES=4, FF_FS_NORTC=1
- get_deps.py removes stock ffconf.h after clone to avoid conflict
- Remove vendored fatfs source files from git tracking
FatFS R0.16 includes important fixes since R0.15:
- Fixed FAT32 FsInfo regression (forced full FAT scan on f_getfree)
- Fixed f_readdir infinite loop (from R0.15b)
- f_getcwd/.. now works on exFAT
- Added FF_FS_CRTIME support
|
|
|
|
|
|
adjust CLI configuration and HIL tests
|
|
|
|
Signed-off-by: HiFiPhile <[email protected]>
|
|
Signed-off-by: HiFiPhile <[email protected]>
|
|
|
|
|
|
|
|
Signed-off-by: HiFiPhile <[email protected]>
|
|
Signed-off-by: Zixun LI <[email protected]>
|
|
Signed-off-by: Zhihong Chen <[email protected]>
|
|
|
|
- Added `rw61x` family support.
- Added `frdm_rw612` board support.
- Update `get_deps.py` to include mcux-sdk for RW61x.
- Add ci_hs_rw61x include to ChipIdea HS driver and enable host examples.
|
|
Signed-off-by: HiFiPhile <[email protected]>
|
|
Signed-off-by: HiFiPhile <[email protected]>
|
|
Signed-off-by: HiFiPhile <[email protected]>
|
|
Signed-off-by: HiFiPhile <[email protected]>
|
|
Signed-off-by: HiFiPhile <[email protected]>
|
|
not defined
|
|
fix compiling with nuc family
|
|
|
|
|
|
|
|
|
|
Signed-off-by: HiFiPhile <[email protected]>
|
|
enable host example build for samd21/d51
|
|
|
|
|
|
|
|
|
|
Signed-off-by: HiFiPhile <[email protected]>
|
|
|
|
|
|
|
|
Signed-off-by: HiFiPhile <[email protected]>
|
|
|
|
|
|
|
