| Age | Commit message (Collapse) | Author |
|---|
|
console_write() forwards what the attached CDC device sent back to the
board's console, and reached for board_uart_write() directly to stay
non-blocking. On a board whose console is the debug probe there is no UART:
board_uart_write() is a stub returning -1, so everything the device echoed was
dropped, and the do/while loop retried a write that could never make progress
and spun until more data arrived.
Send it through SEGGER_RTT_Write() on LOGGER_RTT builds -- already
non-blocking in the default NO_BLOCK_SKIP mode, which is what the UART path
wanted board_uart_write() for.
The retry is also bounded now. board_uart_write() is only documented to
return the number of bytes sent, and the stubs disagree on how they say "no
console here" -- lpc40 returns -1, apm32f0xx returns 0 -- so the loop cannot
decide from the return value alone when to stop. It gives up after 10 ms
without progress instead, which no draining console ever hits, and keeps the
negative return as a fast path so a stub UART does not cost that wait on
every read.
The RTT header include lives in board_api.h so any example can reach it; the
include path only exists when LOGGER=rtt defines LOGGER_RTT.
host/cdc_msc_hid now passes on ea4088_quickstart, whose probe (LPC-Link2) has
no VCOM: the CDC echo round-trips through a CH340 with TX-RX shorted.
|
|
Removing the obsolete host vendor driver also dropped the `#define CFG_TUH_VENDOR 0`
line from the six example configs that carried it. Put it back: host vendor is
coming, and the configs are where a reader looks for the set of host classes an
example can turn on.
Restored byte-identical to the pre-removal state, each file keeping its own column
alignment. The define is inert today - nothing under src/, hw/ or tools/ reads
CFG_TUH_VENDOR - and it is 0 everywhere, so ci_select still reads the vendor class
as enabled by no example and a change to it still selects nothing.
Note the option's default in src/tusb_option.h is still gone; implementing the
driver will need that back alongside the usbh driver-table entry.
|
|
Nine examples/host/*/only.txt gate on family:samd21, but 2a8811ebb merged the
samd2x and saml2x BSPs into hw/bsp/samd2x_l2x. skip_example takes `family:` from
the directory name, so since that rename every one of these examples has been
skipped on every board of the family, under make as well as cmake - although
hw/bsp/samd2x_l2x/family.cmake wires src/portable/microchip/samd/hcd_samd.c.
107 host firmware images were being compiled nowhere.
The merged family is wider than the old samd21 one, so three boards need an
explicit skip rather than the rename alone:
atsaml21_xpro, saml22_feather, sensorwatch_m0 - not samd21, so hcd_samd.c is
not compiled for them (previous commit); SAML22 has no host controller at all
curiosity_nano - SAMD21 with 16 KB RAM; msc_file_explorer_freertos overflows it
by 3688 bytes (ram 122.51%). Only that one example; the other eight fit.
Verified across the whole family: cmake 11 boards x 9/9 examples + curiosity_nano
8/9, three boards skipped, 0 failures; make 98 OK / 0 failed (was 98/9 before).
Device examples on saml21 and saml22 are unaffected.
|
|
vendor_host.c/.h implemented a CFG_TUH_VENDOR class driver that no example, board
or test ever enabled: usbh's driver table entry was compiled out everywhere, and
the six tusb_config.h files that mentioned the macro all set it to 0. Maintainer
call - dead code, not a shrinking of supported classes.
Removes the sources, the usbh driver-table entry, the CFG_TUH_VENDOR default in
tusb_option.h, the tusb.h include, both build-system source lists, the rp2040
family.cmake entry and the IAR project template rows.
|
|
Complete the khci -> chipidea ci_fs migration that was started for device
(commit d70403f1f "host is not yet"):
- device: switch kinetis_k/kl/k32l (Makefiles + k32l CMake) to dcd_ci_fs.c
- host: add hcd_ci_fs.c (port of hcd_khci.c onto ci_fs_regs_t) and switch all
Kinetis families to it; remove src/portable/nxp/khci entirely
- enable host examples (device_info, cdc_msc_hid) for mcu:KINETIS_K
- README: merge the KL and K32L2 rows into a single "KL, K32L" ci_fs row
hcd_ci_fs.c also fixes two pre-existing host bugs found via HIL on frdm_k64f
(present in the old hcd_khci.c too):
- data toggle was flipped on a NAK in suspend_transfer; a NAK transfers no
data so the toggle must be preserved, else the retried bulk packet is
silently discarded by the device (MSC CBW/CSW hang). See comment in file.
- prepare_packets asserted and dropped a transfer when the single shared BDT
was still owned by an in-flight transfer under concurrent activity; now it
returns busy and resume_transfer defers/retries on the next SOF.
HIL verified on frdm_k64f: device 13/13, host cdc_msc_hid (CDC mount + echo +
MSC mount, through a hub).
Co-Authored-By: Claude Opus 4.8 (1M context) <[email protected]>
Claude-Session: https://claude.ai/code/session_01ExGPLP5eU43LR7o6yYLpNi
|
|
- Order CFG_TUH_DEVICE_MAX before CFG_TUH_HID in the host config snippets
(cdc_msc_hid, hid_controller) so the documented snippet has no forward
macro reference when copied into tusb_config.h.
- Fix stale `examples.rst` references: the generator now writes per-group
`docs/examples/<group>/index.rst` pages, so update the conf.py comment and
the build-doc SKILL.md accordingly.
Co-Authored-By: Claude Opus 4.8 (1M context) <[email protected]>
|
|
Documentation tooling:
- Add the `build-doc` skill and `tools/build_doc.py` wrapper for local
Sphinx builds (clean / -W / open).
- Enable Markdown (MyST) in conf.py and auto-collect
examples/{device,host,dual}/*/README.md into a 3-level Examples nav
(Examples > Device/Host/Dual > example), noting each page's source
location and normalizing headings to a single H1.
- Remove the stale `.claude/commands/build-doc.md`; point the AGENTS.md
Documentation section at the skill.
Example docs:
- Add a README.md for every device/host/dual example: what it does, USB
interface table, notable tusb_config.h settings, generic CMake + Make
build steps, and how to try it.
- Fold each *_freertos variant into its base README, noting the FreeRTOS
source path and any RTOS-specific behavior.
Generated docs/examples/ output is git-ignored. Builds clean with
`sphinx-build -W`.
Co-Authored-By: Claude Opus 4.8 (1M context) <[email protected]>
|
|
# Conflicts:
# README.rst
|
|
The variable is set in mount/umount callbacks but not read elsewhere
in the example (rx_cb already receives idx as a parameter). IAR
treats Pe550 as an error under --warnings_are_errors. Tag it
TU_ATTR_UNUSED so the example still shows the pattern of tracking
the device index without erroring on unused-set.
Co-Authored-By: Claude Opus 4.7 <[email protected]>
|
|
Same fix as midi2_device — IAR rejects the unreachable statement
after the while(1) superloop. Let int main fall off the end.
Co-Authored-By: Claude Opus 4.7 <[email protected]>
|
|
- examples/device/midi2_device/src/main.c: drop the unreachable
`return 0;` after the `while(1)` superloop. IAR with
--warnings_are_errors rejects Pe111 (statement is unreachable);
C99 lets `int main` fall off the end, matching midi_test.
- examples/host/msc_file_explorer_freertos/skip.txt: skip
stm32h7s3nucleo. The board has only 64 KB on-chip FLASH and the
FreeRTOS + FatFS host MSC explorer now overflows by ~248 bytes
after the async control queue refactor.
Co-Authored-By: Claude Opus 4.7 <[email protected]>
|
|
|
|
task is blocking
|
|
|
|
Signed-off-by: HiFiPhile <[email protected]>
|
|
Signed-off-by: HiFiPhile <[email protected]>
|
|
|
|
stm32h573i_dk, stm32n657nucleo and stm32n6570dk have the same
pre-existing uninitialized io_ctx.GetTick in their board.h that we
already skip on stm32h7s3nucleo. Trips with Make+LTO; CMake passes.
|
|
Make build was missing midi2_device.c/midi2_host.c from
src/tinyusb.mk. Skip stm32h7s3nucleo board which exposes a
pre-existing uninitialized warning in its board.h (board_init2)
under Make+LTO.
|
|
Restrict midi2_host build to MCUs with USB host support (cloned from
midi_rx) and skip SAMD11 from midi2_device (ROM overflow on link).
|
|
Drop Feather-specific scaffolding (SSD1306 display, font, PIO-USB pin
override) and rename the directory to midi2_host. The example is now a
single main.c + tusb_config.h pair following the midi_rx pattern, with a
printf-only UMP decoder for Channel Voice messages.
Build-tested on adafruit_feather_rp2040_usb_host, daisyseed (stm32h7),
mimxrt1010_evk, stm32f407disco, raspberry_pi_pico2, b_u585i_iot2a,
portenta_c33, stm32h503nucleo, stlinkv3mini, feather_stm32f405.
Ref #3571
|
|
Remove the Waveshare RP2350-USB-A host example and board definition.
The Feather RP2040 USB Host is the TinyUSB reference board for
PIO-USB host and does not require the CFG_TUSB_DEBUG workaround
needed by the Waveshare (R13 pull-up issue).
One host example is sufficient for the PR. The Feather variant has
an improved display with splash, spinner, and 6-line live view.
|
|
The Makefile was missing the FAMILY=rp2040 guard, causing CI failures
on stm32h7rs and other non-RP2040 targets. Matches the approach used
by midi2_host.
|
|
Board-specific variant of midi2_host targeting the Adafruit Feather
RP2040 with USB Type A Host (product 5723).
Hardware differences from the Waveshare RP2350-USB-A example:
- PIO-USB on GP16/GP17 (vs GP12/GP13)
- I2C1 via STEMMA QT on GP2/GP3 (vs I2C0 GP4/GP5)
- USB Host 5V power enable on GP18
Display uses three phases: splash screen, spinner while waiting for
a device, then live scrolling UMP message view with 6 visible lines.
Tested board-to-board: RP2040 Pico (Device) to Feather RP2040 (Host),
SSD1306 128x64 OLED showing decoded MIDI 2.0 messages in real time.
|
|
- Use UINT32_C(1) instead of 1u for bit shifts >= 16 in
midi2_device.c to avoid shift-count-overflow on 16-bit
platforms (MSP430)
- Add Makefiles for midi2_device and midi2_host examples with
family guard (skip if FAMILY != rp2040). These examples
require Pico SDK and board-specific hardware
- Restrict midi2_device CMakeLists.txt to rp2040 family
(matching midi2_host)
|
|
Host driver (midi2_host.c):
- midih2_open() now returns actual parsed length instead of max_len,
preventing composite device interface conflicts
- Parsers (alt0/alt1) refactored to return const uint8_t* end pointer
following midi_host.c switch/case pattern
- Alt 1 CS Endpoint now parses MIDI 2.0 layout (bNumGrpTrmBlk at
offset 3 with MIDI_CS_ENDPOINT_GENERAL_2_0 subtype check) instead
of reusing MIDI 1.0 struct (bNumEmbMIDIJack)
- midih2_set_config() now issues SET_INTERFACE control request via
tuh_interface_set() before completing configuration. Falls back to
alt 0 if SET_INTERFACE fails
- Extracted midih2_set_config_complete() and midih2_set_interface_cb()
for async SET_INTERFACE handling
Device driver (midi2_device.c):
- midi2d_open() skip loop now checks bInterfaceNumber, stopping at
interfaces that belong to other functions in composite devices
- SET_INTERFACE handler now rejects alt > 1 (returns false/stall)
- Named constants for GTB descriptor types and MIDI protocol values
Descriptor macros (usbd.h):
- TUD_MIDI2_DESC_ALT1_HEAD: iInterface set to 0 (consistent with
Alt 0), wTotalLength now uses TUD_MIDI2_DESC_ALT1_CS_LEN to cover
all Alt 1 class-specific descriptors
- TUD_MIDI2_DESC_ALT1_EP: now accepts GTB ID list via variadic args,
emitting complete CS endpoint descriptor
Host example:
- CMakeLists.txt restricted to rp2040 family (display.c requires
Pico SDK headers)
- display.c: null terminator after strncpy in log scroll
Documentation:
- class_drivers.rst updated to reflect SET_INTERFACE behavior and
auto-select with fallback
Addresses: Codex P1 (#1, #2, #3), Copilot (#4-#9)
|
|
Add Host example that receives UMP from a MIDI 2.0 Device via PIO-USB
and displays received messages on a SSD1306 OLED (I2C, 128x64).
Features:
- Boot checklist on display (PWR, TinyUSB, USB bus, Device, Descriptor,
Alt Setting UMP, Mount, Receiving)
- Decode and display all MIDI 2.0 Channel Voice messages
- PIO-USB Host on rhport 1 (GP12/GP13 for Waveshare RP2350-USB-A)
- SSD1306 display via I2C0 (GP4=SDA, GP5=SCL)
Also add board definition for Waveshare RP2350-USB-A.
Tested: Waveshare RP2350-USB-A (Host) receiving UMP from Raspberry Pi
Pico (Device) via USB cable, notes displayed on SSD1306 OLED
|
|
|
|
Signed-off-by: HiFiPHile <[email protected]>
|
|
Co-authored-by: Copilot Autofix powered by AI <[email protected]>
|
|
Co-authored-by: Copilot <[email protected]>
Signed-off-by: HiFiPhile <[email protected]>
|
|
|
|
WARN_FLAGS to tinyusb sources and examples sources only (skip 3rd party library and mcu vendor)
|
|
|
|
IAR is only supported with CMake. Remove all IAR-specific references
from the Make build system including toolchain files, SRC_S_IAR,
LD_FILE_IAR variables, and IAR toolchain detection.
Also fix GET_SECTOR_COUNT truncation in msc_file_explorer and
broken formatting in stm32f7 board_uart_write.
Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]>
|
|
Update FatFS to R0.16
|
|
|
|
|
|
- Add lib/fatfs to deps_mandatory in get_deps.py, pinned to R0.16
(commit 30ca13c6) from github.com/abbrev/fatfs mirror
- Move TinyUSB custom ffconf.h to examples/host/msc_file_explorer/src/
with project-specific settings: FF_CODE_PAGE=437, FF_USE_LFN=1,
FF_FS_RPATH=2, FF_VOLUMES=4, FF_FS_NORTC=1
- get_deps.py removes stock ffconf.h after clone to avoid conflict
- Remove vendored fatfs source files from git tracking
FatFS R0.16 includes important fixes since R0.15:
- Fixed FAT32 FsInfo regression (forced full FAT scan on f_getfree)
- Fixed f_readdir infinite loop (from R0.15b)
- f_getcwd/.. now works on exFAT
- Added FF_FS_CRTIME support
|
|
|
|
to prevent xfer is ack while stopping.
|
|
|
|
adjust CLI configuration and HIL tests
|
|
|
|
|
|
|
|
Signed-off-by: HiFiPhile <[email protected]>
|
|
Signed-off-by: HiFiPhile <[email protected]>
|
|
|
|
|
