| Age | Commit message (Collapse) | Author |
|---|
|
|
|
Merge paired host FreeRTOS/no-OS examples into their base directories.
|
|
Merge paired FreeRTOS/no-OS device examples into their base directories.
|
|
Default Espressif builds to FreeRTOS, discover ESP-IDF examples from component metadata, and make skip filtering RTOS-aware.
|
|
- Order CFG_TUH_DEVICE_MAX before CFG_TUH_HID in the host config snippets
(cdc_msc_hid, hid_controller) so the documented snippet has no forward
macro reference when copied into tusb_config.h.
- Fix stale `examples.rst` references: the generator now writes per-group
`docs/examples/<group>/index.rst` pages, so update the conf.py comment and
the build-doc SKILL.md accordingly.
Co-Authored-By: Claude Opus 4.8 (1M context) <[email protected]>
|
|
Documentation tooling:
- Add the `build-doc` skill and `tools/build_doc.py` wrapper for local
Sphinx builds (clean / -W / open).
- Enable Markdown (MyST) in conf.py and auto-collect
examples/{device,host,dual}/*/README.md into a 3-level Examples nav
(Examples > Device/Host/Dual > example), noting each page's source
location and normalizing headings to a single H1.
- Remove the stale `.claude/commands/build-doc.md`; point the AGENTS.md
Documentation section at the skill.
Example docs:
- Add a README.md for every device/host/dual example: what it does, USB
interface table, notable tusb_config.h settings, generic CMake + Make
build steps, and how to try it.
- Fold each *_freertos variant into its base README, noting the FreeRTOS
source path and any RTOS-specific behavior.
Generated docs/examples/ output is git-ignored. Builds clean with
`sphinx-build -W`.
Co-Authored-By: Claude Opus 4.8 (1M context) <[email protected]>
|
|
Signed-off-by: HiFiPhile <[email protected]>
|
|
Signed-off-by: HiFiPhile <[email protected]>
|
|
Signed-off-by: HiFiPhile <[email protected]>
|
|
Signed-off-by: HiFiPhile <[email protected]>
|
|
|
|
The BSP family and MCU option were named "ch58x"/"CH58X", but the supported part is
the CH583/CH582 (and the SDK repo is openwch/ch583); CH585 is a separate MCU family,
so the CH58x umbrella was misleading. Rename to the specific family:
- hw/bsp/ch58x -> hw/bsp/ch583 (dir), and the BSP-local files ch58x_it.* ->
ch583_it.*, system_ch58x.* -> system_ch583.* (include guards/refs updated). The
vendor SDK files (CH58x_common.h, CH58x_*.c in hw/mcu/wch/ch583) keep their names.
- OPT_MCU_CH58X -> OPT_MCU_CH583 in tusb_option.h, tusb_mcu.h, and the shared WCH
USBFS driver (ch32_usbfs_reg.h, dcd_ch32_usbfs.c). OPT_MCU_CH582 is kept as an
alias (same value), so either name selects the same code.
- FAMILY_MCUS CH58X -> CH583, CFG_TUSB_MCU=OPT_MCU_CH583, mcu:CH58X -> mcu:CH583 in
the example skip lists, the CI build matrix (ci_set_matrix.py), the get_deps family
tag, and docs/reference/boards.rst.
Board names (ch582m_evt, yd-ch582m) are unchanged. Verified: make + cmake build for
ch582m_evt, and ci.lan HIL (all device examples pass).
Co-Authored-By: Claude Opus 4.8 (1M context) <[email protected]>
|
|
CH58x has no isochronous support (dcd_edpt_iso_alloc() returns false), but the
audio class ignores that result and the endpoints fall back to capped 64-byte
non-iso transfers, producing non-functional audio firmware. video_capture and the
FreeRTOS audio examples already carry mcu:CH58X; add it to the remaining iso
examples (audio_test, audio_4_channel_mic, audio_test_multi_rate, cdc_uac2,
uac2_headset, uac2_speaker_fb) so they are not built for CH58x.
Found by Codex review. Verified via build_utils.skip_example() that all six now
skip on ch582m_evt while control examples (e.g. cdc_msc) still build.
Co-Authored-By: Claude Opus 4.8 (1M context) <[email protected]>
|
|
Fix one direction endpoint examples
|
|
fix: BE bitfield guards for audio structs and endian-safe wValue/wIndex extraction in UAC2 examples
|
|
Enabling the audio test fleet-wide surfaced failures on esp32-p4/s3 and
metro_m4_express: the UAC mic enumerates but arecord fails the iso IN read
with EIO, while 18 other boards pass strict=1.000.
esp32: root cause is the FreeRTOS tick rate. ESP-IDF defaults
CONFIG_FREERTOS_HZ to 100, so the audio task wakes only every 10 ms and
can't service the 1 ms UAC iso frames -> underrun -> arecord EIO. (The same
dwc2 driver passes on STM32, whose FreeRTOSConfig is 1000 Hz.) Set
CONFIG_FREERTOS_HZ=1000 in the example sdkconfig.defaults; the example
defaults are honored in the generated sdkconfig alongside the BSP's, so this
takes effect.
metro_m4_express (samd51): not tick-rate -- its FreeRTOSConfig is already
1000 Hz like the passing boards -- so it's a separate iso-IN issue, skipped
for now.
Co-Authored-By: Claude Opus 4.8 (1M context) <[email protected]>
|
|
The audio20 get/set entity dispatchers already extract entity_id from
wIndex and route to the matching clock / feature-unit helper, so each
helper's own entity_id re-derivation and TU_ASSERT(entity_id == ...) was
dead: the helper is only ever reached for its one entity. Unknown
entities are still rejected by the dispatcher's "not handled" path.
Remove the redundant local, the dead assert, and the constant "entity"
field from each helper's not-supported log (the message text already
identifies the entity). The local is dropped entirely rather than kept
for the log, since TU_LOG1 compiles out in release and would leave it
unused.
Co-Authored-By: Claude Opus 4.8 (1M context) <[email protected]>
|
|
|
|
|
|
|
|
# Conflicts:
# README.rst
|
|
* test/hil: replace build.flags_on with named variant schema
Boards declare build variants as `variant: [{name, flags}]` instead of
`build.flags_on`. The variant `name` is the build dir (cmake-build-<name>) and
the HIL report row; `flags` is the raw CFLAGS string (-D...=1) injected via
CFLAGS_CLI. No `variant` => a single build named after the board.
- build.py: --build-name <name> (dir) + --cflag=<token> (raw CFLAGS, repeatable,
=form survives the matrix's shell word-splitting); drop -f1/CFLAGS wrapping.
- hil_ci_set_matrix.py: emit one build arg per variant.
- hil_test.py: iterate variants; report row + build dir = variant name.
- hil_ci.sh: copy all cmake-build-<board>* dirs for -b runs.
- get_deps.py: accept (ignore) --build-name/--cflag from matrix args.
- tinyusb.json: migrate all 6 flags_on boards to variant.
* board_test: park CI build with busy spin instead of wfe
|
|
hil: park boards with idle board_test instead of erasing flash
|
|
Add control transfer fifo for host stack
|
|
- src/tusb.c: extend tu_str_xfer_result[] with "ABORTED" and "INVALID"
to match the new enum size. Not reachable today (no HCD posts those
values through hcd_event_xfer_complete), but keeps the enum/table
invariant intact so future HCDs that surface ABORTED don't index OOB.
- examples/dual/dynamic_switch/src/main.c: apply the same while(1)
hoist already done for cdc_task / print_devinfo_task to
led_blinking_task. On OS_NONE the loop returned mid-iteration, which
on first call could fire multiple back-to-back toggles while
start_ms (initially 0) caught up to uptime.
Co-Authored-By: Claude Opus 4.7 <[email protected]>
|
|
Signed-off-by: HiFiPhile <[email protected]>
|
|
Sonar flagged the loop body as executing only once on OS_NONE because
the OS_NONE branch returns inside the first iteration (main() drives
the task again). Make the while(1) conditional on RTOS so the OS_NONE
build is a straight-line function with no misleading loop.
Co-Authored-By: Claude Opus 4.7 <[email protected]>
|
|
The variable is set in mount/umount callbacks but not read elsewhere
in the example (rx_cb already receives idx as a parameter). IAR
treats Pe550 as an error under --warnings_are_errors. Tag it
TU_ATTR_UNUSED so the example still shows the pattern of tracking
the device index without erroring on unused-set.
Co-Authored-By: Claude Opus 4.7 <[email protected]>
|
|
Same fix as midi2_device — IAR rejects the unreachable statement
after the while(1) superloop. Let int main fall off the end.
Co-Authored-By: Claude Opus 4.7 <[email protected]>
|
|
- examples/device/midi2_device/src/main.c: drop the unreachable
`return 0;` after the `while(1)` superloop. IAR with
--warnings_are_errors rejects Pe111 (statement is unreachable);
C99 lets `int main` fall off the end, matching midi_test.
- examples/host/msc_file_explorer_freertos/skip.txt: skip
stm32h7s3nucleo. The board has only 64 KB on-chip FLASH and the
FreeRTOS + FatFS host MSC explorer now overflows by ~248 bytes
after the async control queue refactor.
Co-Authored-By: Claude Opus 4.7 <[email protected]>
|
|
iccarm rejects -Wno-type-limits, breaking the hil-hfp-iar CI matrix
(stm32l412nucleo, stm32f746disco, lpcxpresso43s67). Apply the same
CMAKE_C_COMPILER_ID guard used in hw/bsp/family_support.cmake so IAR
builds skip the flag without losing the GCC warning suppression.
Co-Authored-By: Claude Opus 4.7 <[email protected]>
|
|
|
|
checks
|
|
task is blocking
|
|
|
|
|
|
Co-authored-by: HiFiPhile <[email protected]>
|
|
Signed-off-by: HiFiPhile <[email protected]>
|
|
Signed-off-by: HiFiPhile <[email protected]>
|
|
Signed-off-by: HiFiPhile <[email protected]>
|
|
feat: Add USB-MIDI 2.0 Device and Host class drivers
|
|
Signed-off-by: HiFiPhile <[email protected]>
|
|
Default RX/TX buffers to EPSIZE for both device and host. Document
drain-in-loop on ump_read; example device callback drains until
empty.
|
|
Signed-off-by: HiFiPhile <[email protected]>
|
|
|
|
stm32h573i_dk, stm32n657nucleo and stm32n6570dk have the same
pre-existing uninitialized io_ctx.GetTick in their board.h that we
already skip on stm32h7s3nucleo. Trips with Make+LTO; CMake passes.
|
|
arm-clang fails with -Werror=unused-function; arm-gcc was silently
omitting it via LTO. The helper was never called.
|
|
Make build was missing midi2_device.c/midi2_host.c from
src/tinyusb.mk. Skip stm32h7s3nucleo board which exposes a
pre-existing uninitialized warning in its board.h (board_init2)
under Make+LTO.
|
|
Restrict midi2_host build to MCUs with USB host support (cloned from
midi_rx) and skip SAMD11 from midi2_device (ROM overflow on link).
|
|
Drop Feather-specific scaffolding (SSD1306 display, font, PIO-USB pin
override) and rename the directory to midi2_host. The example is now a
single main.c + tusb_config.h pair following the midi_rx pattern, with a
printf-only UMP decoder for Channel Voice messages.
Build-tested on adafruit_feather_rp2040_usb_host, daisyseed (stm32h7),
mimxrt1010_evk, stm32f407disco, raspberry_pi_pico2, b_u585i_iot2a,
portenta_c33, stm32h503nucleo, stlinkv3mini, feather_stm32f405.
Ref #3571
|
