summaryrefslogtreecommitdiff
path: root/hw/bsp/ea4357
AgeCommit message (Collapse)Author
2021-02-24clean uphathach
2020-10-08clean up jlink default interfacehathach
2020-09-03fix vector assignhathach
2020-09-03rename tuh_isr/hcd_isr to tuh_int_handler/hcd_int_handlerhathach
2020-09-03revert to use __USE_LPCOPENhathach
properly init fpu on LPC M4
2020-09-02revert to use float-abihathach
define __USE_CMSIS instead of __USE_LPCOPEN will have startup enable FPU on startup properly. Although it is only relevant to lpx43/40 series, change all to __USE_CMSIS for consistency
2020-09-01add more logging to host stackhathach
tested host with lpc4357, don't use fpu with lpc m4 since it seems to cause hardfault (stack does not make use of fpu anyway).
2020-05-19usb0 host on mcb1800 work with fullspeed mode.hathach
use usbh_edpt_open() to correctly map ep2drv[]
2020-05-04temporarily remove osal_task_delay() from osalhathach
- add hcd_uframe_number() API, update EHCI to return uframe number - get host running on ea4357
2020-05-04clean up things, add makefile for host examplehathach
2020-05-03add uart for mcb1800hathach
2020-04-20add uart for ea4357hathach
2020-04-17mass rename tud/dcd_irq_handler to tud/dcd_init_handlerhathach
2020-04-06mass rename tud_isr to tud_irq_handlerhathach
2020-03-11fix cortex M7, M23, M33 freertos buildhathach
2020-03-11freertos demo use static only for most optmized sramhathach
2020-03-07clean up LD_FILE using $(BOARD)hathach
make it easier to duplicate bsp
2019-11-22rename dcd lpc18_43 to transdimensionhathach
2019-11-22move nxp dcd ehci controller reset and modde into dcdhathach
rt1064 work with cdc msc example
2019-11-21moving irq to bsp for lpc17/40hathach
2019-11-21adding tud_isr/tuh_isr with lpc18/43hathach
2019-11-20move -flto to board.mkhathach
current board that doesn work with flto is spresense and mimxrt10xx (due to xip image_vector_table is optimized out).
2019-11-11update makefile for lpc boardshathach
2019-11-11update makefile for lpc mcuhathach
2019-10-24fix missing board uart read/write()hathach
2019-10-12adding log support with uarthathach
started with pca10056
2019-09-27add -Wextra for more warnings to examplehathach
non-stack warning (probably mcu driver) should be suppressed in the board.mk
2019-09-09clean up lpc makefilehathach
2019-09-09clean uphathach
2019-08-31fix segger embbeded studio compile issuehathach
2019-08-23drop board_* in bsp c filehathach
move hw/cmsis to hw/mcu/nordic since only nrf uses it.
2019-05-15clean uphathach
2019-05-15ea4357 build with makefile, add to travishathach
2019-05-15add button for ea4357hathach
2019-05-14more clean up use inline bit funciton instead of macroshathach
2019-05-14update license year to 2019hathach
2019-04-02rename board_led_control to board_led_writehathach
2019-04-01add board_button_read()hathach
2019-03-24remove tusb_hal_millis() usage, less work for portinghathach
2019-03-23clean up bsp, adde board_millis()hathach
2019-03-23add board_noos_millis() for blinkyhathach
2019-03-22simplify board API, adding stm32f3 discoveryhathach
- remove board header since it is not used
2019-03-20clean board uart read & writehathach
2019-03-20migrate license from BSD 3 clause to MIThathach
2018-12-14rename bit_* helper to tu_bit_*, BIT_* to TU_BIT_* for consistencyhathach
2018-12-07enable all warningshathach
2018-12-06host port plugged isr detect, but control xfer not workhathach
2018-12-05hal clean uphathach
- replace tusb_hal_int_enable/disable to dcd_int_enable/disable, hcd_int_enable/disable - remove tusb_hal_init(), this will be part of dcd_init/hcd_init, anything beyond dcd/hcd should be inited by bsp
2018-12-05lpc move Chip_USB_Init() out of stack to bsphathach
2018-12-04add mcb1800, blink led okhathach
generated by cgit v1.3.1 (git 2.54.0) at 2026-08-27 14:14:32 +0000