| Age | Commit message (Collapse) | Author | |
|---|---|---|---|
| 2026-07-24 | ra: TRACE_ETM for ra6m5_ek and ra8m1_ek | hathach | |
| Generic TRCKCR setup gated on DHCSR.C_DEBUGEN (a standalone-boot TRCKCR write wedges the chip un-attachable until power-cycle), two-step write per the hardware manual. ra6m5_ek: div-4 (25 MHz pin) - div-2 is dead on this board at every width/timing; J9 must be closed. ra8m1_ek: chip-max 120 MHz TRCLK / 60 MHz pin via the committed JLinkScript whose empty OnTraceStart defers the trace clock to firmware (J-Link's from-reset enable steps the clock mid-stream at the FSP MOCO-to-PLL switch); ReadIntoTraceCache covers runtime ROM execution. J9 closed on both EKs - open = SWD contention up to apparent bricks. | |||
| 2025-01-22 | - change to use CMAKE_SYSTEM_CPU to prevent CMAKE_SYSTEM_PROCESSOR conflict ↵ | hathach | |
| with zephyr - change tinyusb CMakeLists.txt to function tinyusb_target_add() instead of defining tinyusb lib target | |||
| 2024-12-27 | embed metadata to family.c and board.h to generate supported boards doc | hathach | |
| 2024-12-16 | make sure g_bsp_rom_registers is not dropped by linker in cmake build. | hathach | |
| always reserve 0x100 for option setting in linker to prevent possible bricked mcu | |||
| 2024-12-13 | update build for ra8m1: usbfs work, but usbhs not working just yet. Probably ↵ | hathach | |
| missing configuration or clock setup | |||
| 2024-12-13 | ra8m1_ek led and button works | hathach | |
| 2024-12-12 | used pin generated by rasc | hathach | |
| 2024-12-12 | more migrate to ra smart configurator | hathach | |
| 2024-12-10 | change ra bsp to match fsp generated directory | hathach | |
| 2023-07-26 | refactored multiple ports for hcd rusb2 | hathach | |
| 2023-07-26 | increase stack size for 6 series to 0x1000, 4 series to 0x800 | hathach | |
| 2023-07-26 | updating hcd rusb2 | hathach | |
| - make osal_task_delay() as weak function in usbh - implement osal_task_delay() in hcd rusb2 (may moved to other places) | |||
| 2023-07-07 | add PORT selection for makefile | hathach | |
| 2023-07-07 | fully work with multiple ports without CFG_TUSB_RHPORT0/1 | hathach | |
| 2023-07-07 | correct setting trace clock | hathach | |
| 2023-07-05 | usb hs work with ra 6m5 ek | hathach | |
| 2023-07-04 | update fsp to version 4.5, correct RA BSP. Fix ETM Trace with 6m5 by ↵ | hathach | |
| lowering PLL to 128Mhz. | |||
| 2023-07-03 | add jlinkscript for detect rtt | hathach | |
| 2023-07-03 | board pin data clean up | hathach | |
| 2023-07-03 | move files around | hathach | |
| 2023-07-02 | add etm trace for 6m5 | hathach | |
| 2023-07-01 | initial ra6m5 ek, board_test led + sw works | hathach | |
 |
index : tinyusb.git | |
| Unnamed repository; edit this file 'description' to name the repository. |
| summaryrefslogtreecommitdiff |