| Age | Commit message (Collapse) | Author |
|---|
|
The board-specific PHY-reset nets move behind a board.h opt-in
(TRACE_ETM_QUIET_ENET_PHY on same70_xplained and mimxrt1170_evkb) so other
boards of those families cannot inherit a foreign GPIO write; the
chip-level trace pin muxes stay family-wide by design (same pattern as
stm32h7). same70 reference: width 1 is the validated default until the
J403.16 rework, and the hooks now wait (bounded) for PCKRDY3 before Ozone
arms trace. ra8m1 reference caches the boot ROM in AfterTargetConnect so
--attach sessions decode ROM execution too. etm_capture rejects an
unexpanded CMake JLINK_DEVICE with a clear error; PIO-USB + TRACE_ETM on
RP2350 is now a compile error (48 MHz trace clock is too slow for PIO-USB
and a runtime switch would desync the stream); etm_profile keeps
same-named statics from different modules as distinct rows.
Build-verified: same70_xplained, mimxrt1170_evkb, raspberry_pi_pico2.
|
|
J403 (bottom-side Cortex Debug+ETM footprint, header required):
TRACECLK=PD8 peripheral D, TRACED0-3=PD4-7 peripheral C. TRACE_ETM builds
hold the KSZ8081 PHY in reset (PD4-7 are its RMII receive outputs and it
drives against the trace stream), clock the TPIU from PCK3 (MCK/2) and
mux the pins; the ozone reference starts PCK3 in the post-reset/download
hooks - TPIU programming while PCK3 is stopped is silently lost. Width-1
validated at the stock 300 MHz core; width 4 blocked on a dead D1 line
(suspect probe channel, h743eval crosscheck pending).
|
|
- and add unique ID
- add freertos
|
|
Signed-off-by: HiFiPhile <[email protected]>
|
|
Signed-off-by: HiFiPhile <[email protected]>
|
|
move it to family_configure_common()
also move startup and linker from board target to actual exe
|
|
Co-authored-by: Copilot <[email protected]>
|
|
|
