| Age | Commit message (Collapse) | Author |
|---|
|
Cortex-M0/M0+, the WCH RISC-V parts and MAX3266x have no usable DWT cycle
counter, so their family.c provides SEGGER_SYSVIEW_X_GetTimestamp() from a
free-running hardware timer: a 32-bit general-purpose timer on ST parts
(sysview_stm32_tim2.h), SysTick-extended sources on the M0 families, the
core's SysTick-equivalent on WCH with the documented ordered read of the
split count registers (sysview_wch_timestamp.h), and a TMR on MAX3266x
(sysview_max32_tmr.h).
max32666fthr's DWT implements only watchpoint comparators (DWT_CTRL.NOCYCCNT=1
read live; UG6971 documents no DWT/trace at all), so SystemView's ARMv7-M
default read 0xE0001004 as a frozen 0 and every duration decoded as zero. The
TMR runs at 48 MHz (f_PCLK = f_SYS_CLK/2; Continuous mode, CMP=0xFFFFFFFF,
prescaler 1 - UG6971 15.2 guarantees TMRn_CNT readable while counting); TMR0
by default - present on every MAX32 part, unused by the examples, FreeRTOS
ticks on SysTick - overridable with -DSYSVIEW_MAX32_TMR=n. The family builds
SystemView with SEGGER_SYSVIEW_CORE_OTHER and sets CFG_TUSB_SYSVIEW_TIMESTAMP_BSP,
a tusb_sysview.c opt-in for ARMv7-M parts without CYCCNT where the BSP also
reports the rate via SEGGER_SYSVIEW_X_GetTimestampFreq(); the fixed-1MHz
microsecond contract is unreachable on a powers-of-two-only prescaler.
SEGGER_SYSVIEW_X_GetInterruptId() gains the ICSR.VECTACTIVE read for
CORE_OTHER builds. MAX32650/32690 use different GCR clock-gate names and stay
unported. Measured on the rig: seven host-timed 1.000 s gaps at
1.00044-1.00091 (median +0.05%).
stm32f0 refuses to configure SYSVIEW for stm32f070xb at CMake time: that
variant has no TIM2 at all, and the alternative was an undefined-reference
link error with no hint.
The shared hw/bsp/sysview_*.h join ci_select rule 16's hw/bsp file list
(cross-family build files, compiled only under -DSYSVIEW which no CI leg
enables), mirrored in the spec's rule table, so master's classification
guard resolves them on both axes.
|
|
* add ek_tm4c123gxl to the hil pool, flashing with lm4flash
|
|
# Conflicts:
# src/common/tusb_types.h
# src/portable/mentor/musb/dcd_musb.c
|
|
|
|
|
|
IAR is only supported with CMake. Remove all IAR-specific references
from the Make build system including toolchain files, SRC_S_IAR,
LD_FILE_IAR variables, and IAR toolchain detection.
Also fix GET_SECTOR_COUNT truncation in msc_file_explorer and
broken formatting in stm32f7 board_uart_write.
Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]>
|
|
|
|
|
|
Signed-off-by: Zixun LI <[email protected]>
|
|
Signed-off-by: HiFiPhile <[email protected]>
|
|
|
|
|
|
move it to family_configure_common()
also move startup and linker from board target to actual exe
|
|
|
|
|
|
|
|
with zephyr
- change tinyusb CMakeLists.txt to function tinyusb_target_add() instead of defining tinyusb lib target
|
|
|
|
|
|
|
|
|
|
|
