| Age | Commit message (Collapse) | Author |
|---|
|
Class drivers: skip and account the SS endpoint companion descriptor in
every descriptor walk (hid, midi, midi2, ecm_rndis, printer, mtp, usbtmc),
via a shared usbd_skip_ss_ep_companion() helper in usbd_pvt.h (cdc/ncm
already handled; vendor/dfu naturally tolerant). usbtmc buffer grows to
1024 at SS to satisfy its packet-multiple assert. bth/audio/video are left
FS/HS-only (ISO-centric; ISO is unsupported on the CH569 dcd).
usbd.h: new SS template macros TUD_HID_SS_DESCRIPTOR(+INOUT),
TUD_MIDI_SS_DESCRIPTOR (+ DESC_EP_SS part), TUD_MIDI2_DESC_ALT1_EP_SS,
TUD_PRINTER_SS_DESCRIPTOR, TUD_MTP_SS_DESCRIPTOR,
TUD_USBTMC_BULK_SS_DESCRIPTORS/INT_SS_DESCRIPTOR, with _SS_DESC_LEN
counterparts (bulk endpoints hardcode 1024, companion after every EP).
Examples: 17 bulk/interrupt examples gain the full SS descriptor set
(EP0 512/64 clamp, SS device descriptor bcdUSB 3.20 mps0=2^9, SS config
with companions, BOS caps, speed-switched callbacks): cdc_dual_ports,
cdc_msc_freertos, dfu, dfu_runtime, dynamic_configuration,
hid_boot_interface, hid_composite(+freertos), hid_generic_inout,
hid_multiple_interface, midi_test(+freertos), midi2_device, msc_dual_lun,
mtp, printer_to_cdc, usbtmc, webusb_serial. msc_dual_lun is un-skipped for
CH569 using read-only flash disks (16KB RAM can't hold two 8KB RAM disks,
same as ch32v10x/v20x boards).
Validation: full example sweep green for hydrausb3_v1 (SPEED=super, 19
device ELFs) and raspberry_pi_pico; wTotalLength == sizeof() verified for
every SS configuration array in the built ELFs; ceedling 65/65;
pre-commit clean; code-size delta +0.0% on rp2040 (SS code folds out on
non-SS builds).
Co-Authored-By: Claude Fable 5 <[email protected]>
Claude-Session: https://claude.ai/code/session_019MRGjBT2NBkCoWwyDT4LaE
|
|
* license: use SPDX identifiers for src/ headers
Replace the full ~20-line MIT license boilerplate on every src/ file with a
two-line SPDX tag (SPDX-FileCopyrightText + SPDX-License-Identifier), following
the REUSE convention used by CircuitPython and the Linux kernel. Removes ~3500
lines of duplicated boilerplate.
|
|
- Added bool is_isr parameter to usbd_edpt_xfer() and usbd_edpt_xfer_fifo() wrapper functions
- These are called by class drivers to queue USB transfers
- Updated all callers to pass false by default (non-ISR context)
- Updated audiod_rx_xfer_isr() and audiod_tx_xfer_isr() to pass true (ISR context)
- All 21 unit tests pass
Co-authored-by: HiFiPhile <[email protected]>
|
|
this works with android, for bypassing that absmouse does not support android.
note that, to hide cursor on android for every touch signal, find cursor option in android settings menu.
references:
1. https://stackoverflow.com/questions/28536602/hid-digitizer-descriptor-doesnt-perform-well-with-landscape-orientation
2. https://github.com/jonathanedgecombe/absmouse/blob/master/src/AbsMouse.cpp
|
|
|
|
msc,cdc,hid
HIL enable device DMA for p4
|
|
the functions don't modifies the value
|
|
|
|
- rename tud_hid_report_fail_cb() to tud_hid_report_failed_cb() and change its signature
- use default implementation for hid callbacks to be compatible with keil compiler
- code format
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Implements deinit functions for host/device mode switch
|
|
|
|
HID Mouse with absolute positioning
|
|
|
|
|
|
|
|
CFG_TUD_MEM_SECTION is default to CFG_TUSB_MEM_SECTION
|
|
|
|
fix: Replace device calls to memcpy with tu_memcpy_s
|
|
|
|
|
|
fix: Change all static variables to thread when fuzzing
|
|
|
|
|
|
|
|
Introduces a new function tu_memcpy_s, which is effectively
a backport of memcpy_s. The change also refactors calls
to memcpy over to the more secure tu_memcpy_s.
|
|
up coming release
|
|
|
|
since HS interrupt endpoint can be up to 1024, 8-bit is not enough.
affected APIs are:
- tud_hid_n_report() / tud_hid_report()
- tud_hid_report_complete_cb()
|
|
|
|
remove the usage of TUD_OPT_RHPORT in class driver
|
|
TUSB_OPT_DEVICE_ENABLED still usable for backward compatible
|
|
|
|
|
|
|
|
|
|
add caplock detection for hid_composite
|
|
|
|
|
|
|
|
|
|
|
|
|
|
- add tud_hid_n_interface_protocol()
- rename tud_hid_n_boot_mode() to tud_hid_n_get_protocol()
- rename tud_hid_boot_mode_cb() to tud_hid_set_protocol_cb()
- add HID_PROTOCOL_BOOT/REPORT to avoid magic number 0,1
- rename HID_PROTOCOL_NONE/KEYBOARD/MOUSE to HID_ITF_PROTOCOL_ to avoid
confusion
|
|
following API signature is changed:
- tud_hid_descriptor_report_cb()
- tud_hid_get_report_cb()
- tud_hid_set_report_cb()
- tud_hid_boot_mode_cb()
- tud_hid_set_idle_cb()
|
