summaryrefslogtreecommitdiff
path: root/src/common/tusb_mcu.h
AgeCommit message (Collapse)Author
2025-10-13get cmake build with 54h20 not tested on actual hw, probably not runninghathach
2025-10-10try to enable ohci for lpc55 but not working, probably clock issuehathach
2025-09-17use existing overloadable Pico SDK section macro instead of creating a ↵Peter Lawrence
custom one
2025-09-16Add ESP32-H4 as a supported MCU in TinyUSB and wire it into build/runtime:igor.masar
- tusb_option.h: define OPT_MCU_ESP32H4 - tusb_mcu.h: enable DWC2 USBIP for H4 - dcd_dwc2.c: add H4 USB_WRAP field aliases (wrap_* → legacy names) - dwc2_esp32.h: add H4 controller entry (FS base/IRQ, ep caps) - family.c: include H4 in USB init/PHY setup
2025-09-10Initial STM32WBARI eval supportDalton Caron
Clean up includes definitions Remove wait that is not required Remove redundant settings Clean up clock configuration to look like other modules Remove MSP_Init that is not required Clean up driver code dhcp: Fix DHCP_OFFER/DHCP_ACK destinaton. In RFC 2131, the destination of DHCP OFFER/ACK is defined in Section 4.1. Fix the destination error by following the rule of RFC 2131. TODO: We implement all rule but the last one. ARP table is required to associate client's macaddr. Currently, fallback to broadcast. Signed-off-by: Elwin Huang <[email protected]> Fix compile error. Fix goto indentation Co-authored-by: Copilot <[email protected]> Fix osal_spin_unlock for mynewt Mynewt version for osal_spin_unlock() called OS_ENTER_CRITICAL instead of OS_EXIT_CRITICAL. Signed-off-by: Jerzy Kasenberg <[email protected]> Add ESP32-C5 and ESP32-C61 definitions fix(dcd/dwc2): Fix reset procedure for versions >=4.20a Fix STM32L4 GPIOD clock enable for variants without GPIOD Add weact blackpill support Add to boards.rst file Fix file Small cleanups. Insert small delay for LowSpeed device Improve retry operation at NAK response. Remove dynamic memory allocation use tusb_time_millis_api() instead of board_millis() make loopdelay() always inline update at32f405 dwc2 info and phy width selection add at32f415 dwc2 info add some consumer page configs remove duplicated enum Initial plan Fix obsolete cnt assignment in _tu_fifo_peek() overflow check Co-authored-by: hathach <[email protected]> Initial plan Update STM32 CMSIS dependencies to fix HSITRIM register bug Co-authored-by: hathach <[email protected]> Remove accidentally committed dependency directories Co-authored-by: hathach <[email protected]> Update all STM32 HAL driver dependencies to latest versions Co-authored-by: hathach <[email protected]> fix linker h745 issue with clang fix linker h745 issue with clang Update all STM32 CMSIS device dependencies to latest versions Co-authored-by: hathach <[email protected]> update pio-usb Create comprehensive GitHub Copilot instructions and fix pre-commit configuration for TinyUSB (#3234) * Initial plan * Create comprehensive GitHub Copilot instructions for TinyUSB Co-authored-by: hathach <[email protected]> * Remove accidentally committed dependencies, use tools/get_deps.py instead Co-authored-by: hathach <[email protected]> * Fix .gitignore: ignore vendor/ directory not ceedling script Co-authored-by: hathach <[email protected]> * Revert .gitignore changes and add README_processed.rst Co-authored-by: hathach <[email protected]> * Remove README_processed.rst and revert ceedling file permissions Co-authored-by: hathach <[email protected]> * Changes before error encountered Co-authored-by: hathach <[email protected]> * Remove redundant manual validation step, keep only pre-commit and build validation Co-authored-by: hathach <[email protected]> * fix pre-commit --------- Co-authored-by: copilot-swe-agent[bot] <[email protected]> Co-authored-by: hathach <[email protected]> modified the bsp files of at32 to make them work better the family name error of at32 has been corrected fix pre-commit STM32N6570-DK board is added. Build with DEBUG=1 (make BOARD=stm32n6570dk DEBUG=1 all), otherwise it does not work for now. Tested with examples/device/cdc_dual_ports
2025-08-15Add ESP32-C5 and ESP32-C61 definitionsScott Shawcroft
2025-08-05Fix AT32F405xx missing USB HS definitionpeppapighs
2025-08-01Merge pull request #3191 from hathach/at32Ha Thach
support at32 mcu (2)
2025-07-07Merge pull request #2963 from HiFiPhile/stm32_cacheHa Thach
Add DWC2 cache maintenance routines for STM32
2025-07-07change CFG_TUSB_MEM_DCACHE_LINE_SIZE_DEFAULT (not defined) to 1hathach
use stock iar linker
2025-07-07support at32 mcuzhiqiang
2025-07-05Use DMA enable for DCache conditionHiFiPhile
Signed-off-by: HiFiPhile <[email protected]>
2025-07-05always define CFG_TUH_WCH_USBIP_USBFS=1 for ch32v20x since only port1 ↵hathach
support host mode reformat hcd usbfs add uart rx for ch32v20x bsp
2025-06-13Add STM32 DWC2 cache supportHiFiPhile
Signed-off-by: HiFiPhile <[email protected]>
2025-06-12merge n6 and h7rs (same config)hathach
2025-06-04chore: squash previous commits from other branchesJames Sandison
2025-05-19dwc2 only enter critical in isr with multiple core CPUshathach
2024-12-17enable CFG_TUD/THU_MEM_DCACHE_ENABLE for imxrt with M7 by defaulthathach
2024-11-28Merge branch 'master' into fork/pschatzmann/rp2040-isohathach
2024-11-27Add support for the STM32C0 and the NUCLEO-C071RB.David (Pololu)
2024-11-27default CFG_TUH_DWC2_DMA_ENABLE to 0hathach
2024-11-27update device_info example to work with p4 dcachehathach
2024-11-25change dcd_dcache_*() API return type from void to boolhathach
2024-11-22TUD_EPBUF_TYPE_DEF ncm_devicehathach
2024-11-21- move freertos_hooks to board.chathach
- add device/midi_test_freertos example - update bth/dfu/midi device for cache line size
2024-11-20add CFG_TUD_MEM_DCACHE_ENABLE, CFG_TUD_MEM_DCACHE_LINE_SIZE optionhathach
2024-11-19Merge pull request #2881 from hathach/enhance-dwc2-dcdHa Thach
2024-11-16Make HS USB default for STM32H7RSChintalagiri Shashank
2024-11-16Add support for STM32H7RSxxChintalagiri Shashank
2024-11-14rename CFG_TUD_DWC2_DMA to CFG_TUD_DWC2_DMA_ENABLEhathach
2024-11-08get hcd work esp32p4 but only in slave mode. In DMA channel's HCDMA is ↵hathach
increased but data transfer over USB is not correct.
2024-10-15RP2040 New ISO APIpschatzmann
2024-10-02Merge branch 'master' into fork/Maerdl/masterhathach
2024-10-01support stm32U0 deviceHaefner, Martin
2024-09-30added p4, seems to work well and enumeratedhathach
2024-09-30try to add esp32 p4 and esp-idf v5.3 supporthathach
2024-09-24add CFG_TUD_DWC2_DMA, make it compile time optionhathach
2024-09-04dwc2: for esp32 force disconnect/connect using USB_WRAP otg pad override ↵hathach
(DM=DP=0) in addition to dwc2's dctrl
2024-08-19rename TUD_ENDPOINT_EXCLUSIVE_NUMBER to TUD_ENDPOINT_ONE_DIRECTION_ONLYhathach
2024-08-19implement dcd_edpt_iso_alloc/dcd_edpt_iso_activate for musb. video_capture ↵hathach
example with iso kind of work but not smoothly. audio example does not seems to work as expected
2024-08-17define and use TUD_ENDPOINT_EXCLUSIVE_NUMBERhathach
2024-08-17more refactor to simplify musb driverhathach
2024-08-15add TUP_USBIP_MUSB macro, minor renamehathach
2024-08-14Merge branch 'refs/heads/master' into fork/BrentK-ADI/max32_porthathach
2024-08-08Fix ESPs without device supportScott Shawcroft
The newer tusb_option.h assumes that there is a number of device endpoints to check against.
2024-07-12simplify dwc2 test modehathach
- all dwc2 ip seems to support test mode in both fs/hs -> remove TUP_USBIP_DWC2_TEST_MODE - remove dcd_check_test_mode_support(), all should be supported - move enum tusb_feature_test_mode_t to tusb_types.h
2024-07-01Add MAX78002 SupportBrent Kowal
-Added support for MAX78002, MAX78002EVKIT -Added provisions for remaining MAX32 USB parts
2024-06-28Initial Commit for MAX32 SupportBrent Kowal
Initial commit for the port of TUSB to MAX32xxx parts, staring with MAX32690 - Added dcd_max32.c (based on dcd_musb.c) for interfacing with the peripheral - Added MAX32690 part family support - Added max32690evkit board support - Updated examples for unique EP number requirement - Updated get_deps.py to fetch the MSDK Known Issues / Additional Testing Required - msc_dual_lun only shown 1 volume on Windows - USBTMC does not have a valid Windowsdriver - DFU does not have a valid Windows driver - WebUSB is "Device not Recognized" - Need to test build scripts with IAR and Clang
2024-06-15Merge pull request #2672 from tinic/masterHa Thach
Add support for STM32U535xx/STM32U545xx
2024-06-14add ch32v103 bsp support, compile but does not run, probably due to ↵hathach
compile/linker issue
generated by cgit v1.3.1 (git 2.54.0) at 2026-08-28 21:48:19 +0000