summaryrefslogtreecommitdiff
path: root/src/portable/st/synopsys
AgeCommit message (Collapse)Author
2021-09-08fix build with gd32vf103hathach
2021-09-08implement remote wakeup for stm synopsyshathach
2021-09-07make synopsys usbcv compliancehathach
- implement dcd_edpt_close_all() - reset dtoggle when open endpoint - correct dev interrupt mask on bus reset
2021-08-26add dcd_edpt_close_all() for clear existing configured statehathach
correctly responded to TD 9.13 Set Configuration Test
2021-08-15Merge pull request #959 from KarlK90/gd32vf103-support-tiny-usbHa Thach
[PORT] Add GD32VF103 support and Sipeed Longan Nano Board support
2021-08-15move gd32vf103 to its own familyhathach
2021-08-14synopsys clear DAD on bus_resethathach
2021-08-13Fix dcd_set_address bug when called more than once with differentTobias Ringström
addresses (e.g. after plugging the device into a different port).
2021-08-07Remove unnecessary define guardStefan Kerkmann
The GD32VF103 family only has USB-OTG peripherals.
2021-08-07Remove dependencies to external libraries for the dcd driverStefan Kerkmann
The core of tinyusb must be as independent as possible, we previously relied on nuclei-sdk or the GD32VF103 firmware library for the synopsys driver to work with the GD32VF103. Fortunatly we needed very few parts from them so we implement them here.
2021-08-03Add stm32 license headerStefan Kerkmann
2021-08-03Add hacky GD32VF103 supportStefan Kerkmann
2021-07-19Fix for dcd_synopsys driver integer overflow in HS mode (issue #968).Ben Evans
2021-05-27clean up tusb_fifo.h includehathach
2021-05-10minor clean uphathach
2021-04-15minor clean uphathach
2021-03-23Fix bug in writing to constant src/dst address.Reinhard Panhuber
Copying has to be conduct in full words (at least for STM32). Renamed copy function to tu_fifo_write_n_const_addr_full_words()
2021-03-02Change for copy modes in dcd_synopsis.cReinhard Panhuber
2021-03-02Rename dcd_edpt_iso_xfer() to dcd_edpt_xfer_fifo()Reinhard Panhuber
2021-02-23Implement dcd_edpt_iso_xfer() for dcd_da146xx.c BUT WITHOUT DMA SUPPORTReinhard Panhuber
2021-02-14Change FIFO use indication to ff == NULL to avoid future errors.Reinhard Panhuber
This way people don't need to pay attention for the buffer pointer
2021-02-12Complete redesign of audio driver.Reinhard Panhuber
2021-01-31Rework audio driverReinhard Panhuber
2021-01-19Change names from edpt_ISO_xfer to edpt_iso_xferReinhard Panhuber
2021-01-18Correct include path to #include "common/tusb_fifo.h"Reinhard Panhuber
2021-01-18Implement dcd_edpt_ISO_xfer() and adapt transmission schemeReinhard Panhuber
2021-01-09Merge remote-tracking branch 'upstream/master' into edpt_ISO_xferReinhard Panhuber
2021-01-08fix cihathach
2021-01-08use dcd_event_bus_reset() with speed to replace bus_signalhathach
2021-01-08another renamehathach
2021-01-08remove inline for update_grxfsizhathach
2021-01-08more minor workhathach
2021-01-08minor clean up following pr581hathach
2021-01-04Correct function declarationReinhard Panhuber
2021-01-04Minor corrections for PRReinhard Panhuber
- externerlize code into functions - correct comments
2021-01-04Remove too verbose commentReinhard Panhuber
2021-01-04Start changes - not yet finishedReinhard Panhuber
2021-01-03Clean upReinhard Panhuber
2021-01-03Rework USB FIFO allocation scheme and allow RX FIFO size reductionReinhard Panhuber
2020-11-27fix cihathach
2020-11-27add bus suspend & resume support for esp32s2hathach
2020-10-24Move into if statementJacob Potter
2020-10-24CR feedback: compare CFG_TUSB_RHPORT1_MODE instead of using new macroJacob Potter
2020-10-18Allow use of internal FS PHY on OTG_HS interfaceJacob Potter
Some ST parts (like STM32F74xxx / STM32F75xxx) allow the USB_OTG_HS core to be used with either an external high-speed ULPI PHY or an internal full-speed-only (12mbps) PHY. Currently the code assumes than an ULPI PHY is used unless the chip has an internal high-speed PHY (`#if defined(USB_HS_PHYC)`), with no provision to use the internal FS PHY.
2020-10-09Revert dcd_alloc_mem_for_conf() but keep changes from @kasjer for ISO EPReinhard Panhuber
Add tud_audio_set_itf_close_EP_cb()
2020-09-28Fix minor issue.Reinhard Panhuber
- Change set_EP0_max_pkt_size() to set_EP0_max_pkt_size(void).
2020-09-28Cleanup for PR.Reinhard Panhuber
2020-09-28synopsys: Fix odd/even frame handling for ISOJerzy Kasenberg
Current implementation always sets odd/even bit for ISO transactions. This is a good strategy only if interval is 1. For ISO endpoint interval in (micro)frames is computed as 2^(interval-1), which means that odd/frame number should stay same for interval values > 1. With this change only when interval is 1 odd/even bit is modified.
2020-09-28synopsys: Remove compilation warning in dcd_edpt_closeJerzy Kasenberg
dcd_edpt_close() no longer modifies FIFO distribution. Code that that was commented out is removed along with variables that are no longer used. FIFO distribution among endpoints is handled upfront and does not need to be modified in open and close endpoint functions.
2020-09-28synopsys: Fix fifo allocation schemaJerzy Kasenberg
Recommended FIFO allocation schema includes 2 maximum endpoint sizes. Comment suggested that this is the case while it would work according to this description only in checked endpoints were ascending sizes. Also two same size endpoints would be counted as one. That is fixed by way sz is filled. Calculation used too much modulo operation while single division was enough to account for odd FIFO sizes. Extra space that is evenly distributed between Bulk and control endpoints was incorrectly calculated it could prevent allocation of ISO endpoint FIFO when bulk endpoints existed with smaller endpoint numbers. Minimum endpoint FIFO size is 16 32bit words, FIFO space requirement is now observed.
generated by cgit v1.3.1 (git 2.54.0) at 2026-09-02 15:40:33 +0000