| Age | Commit message (Collapse) | Author | |
|---|---|---|---|
| 2021-04-15 | minor clean up | hathach | |
| 2021-03-23 | Fix bug in writing to constant src/dst address. | Reinhard Panhuber | |
| Copying has to be conduct in full words (at least for STM32). Renamed copy function to tu_fifo_write_n_const_addr_full_words() | |||
| 2021-03-02 | Change for copy modes in dcd_synopsis.c | Reinhard Panhuber | |
| 2021-03-02 | Rename dcd_edpt_iso_xfer() to dcd_edpt_xfer_fifo() | Reinhard Panhuber | |
| 2021-02-23 | Implement dcd_edpt_iso_xfer() for dcd_da146xx.c BUT WITHOUT DMA SUPPORT | Reinhard Panhuber | |
| 2021-02-14 | Change FIFO use indication to ff == NULL to avoid future errors. | Reinhard Panhuber | |
| This way people don't need to pay attention for the buffer pointer | |||
| 2021-02-12 | Complete redesign of audio driver. | Reinhard Panhuber | |
| 2021-01-31 | Rework audio driver | Reinhard Panhuber | |
| 2021-01-19 | Change names from edpt_ISO_xfer to edpt_iso_xfer | Reinhard Panhuber | |
| 2021-01-18 | Correct include path to #include "common/tusb_fifo.h" | Reinhard Panhuber | |
| 2021-01-18 | Implement dcd_edpt_ISO_xfer() and adapt transmission scheme | Reinhard Panhuber | |
| 2021-01-09 | Merge remote-tracking branch 'upstream/master' into edpt_ISO_xfer | Reinhard Panhuber | |
| 2021-01-08 | fix ci | hathach | |
| 2021-01-08 | use dcd_event_bus_reset() with speed to replace bus_signal | hathach | |
| 2021-01-08 | another rename | hathach | |
| 2021-01-08 | remove inline for update_grxfsiz | hathach | |
| 2021-01-08 | more minor work | hathach | |
| 2021-01-08 | minor clean up following pr581 | hathach | |
| 2021-01-04 | Correct function declaration | Reinhard Panhuber | |
| 2021-01-04 | Minor corrections for PR | Reinhard Panhuber | |
| - externerlize code into functions - correct comments | |||
| 2021-01-04 | Remove too verbose comment | Reinhard Panhuber | |
| 2021-01-04 | Start changes - not yet finished | Reinhard Panhuber | |
| 2021-01-03 | Clean up | Reinhard Panhuber | |
| 2021-01-03 | Rework USB FIFO allocation scheme and allow RX FIFO size reduction | Reinhard Panhuber | |
| 2020-11-27 | fix ci | hathach | |
| 2020-11-27 | add bus suspend & resume support for esp32s2 | hathach | |
| 2020-10-24 | Move into if statement | Jacob Potter | |
| 2020-10-24 | CR feedback: compare CFG_TUSB_RHPORT1_MODE instead of using new macro | Jacob Potter | |
| 2020-10-18 | Allow use of internal FS PHY on OTG_HS interface | Jacob Potter | |
| Some ST parts (like STM32F74xxx / STM32F75xxx) allow the USB_OTG_HS core to be used with either an external high-speed ULPI PHY or an internal full-speed-only (12mbps) PHY. Currently the code assumes than an ULPI PHY is used unless the chip has an internal high-speed PHY (`#if defined(USB_HS_PHYC)`), with no provision to use the internal FS PHY. | |||
| 2020-10-09 | Revert dcd_alloc_mem_for_conf() but keep changes from @kasjer for ISO EP | Reinhard Panhuber | |
| Add tud_audio_set_itf_close_EP_cb() | |||
| 2020-09-28 | Fix minor issue. | Reinhard Panhuber | |
| - Change set_EP0_max_pkt_size() to set_EP0_max_pkt_size(void). | |||
| 2020-09-28 | Cleanup for PR. | Reinhard Panhuber | |
| 2020-09-28 | synopsys: Fix odd/even frame handling for ISO | Jerzy Kasenberg | |
| Current implementation always sets odd/even bit for ISO transactions. This is a good strategy only if interval is 1. For ISO endpoint interval in (micro)frames is computed as 2^(interval-1), which means that odd/frame number should stay same for interval values > 1. With this change only when interval is 1 odd/even bit is modified. | |||
| 2020-09-28 | synopsys: Remove compilation warning in dcd_edpt_close | Jerzy Kasenberg | |
| dcd_edpt_close() no longer modifies FIFO distribution. Code that that was commented out is removed along with variables that are no longer used. FIFO distribution among endpoints is handled upfront and does not need to be modified in open and close endpoint functions. | |||
| 2020-09-28 | synopsys: Fix fifo allocation schema | Jerzy Kasenberg | |
| Recommended FIFO allocation schema includes 2 maximum endpoint sizes. Comment suggested that this is the case while it would work according to this description only in checked endpoints were ascending sizes. Also two same size endpoints would be counted as one. That is fixed by way sz is filled. Calculation used too much modulo operation while single division was enough to account for odd FIFO sizes. Extra space that is evenly distributed between Bulk and control endpoints was incorrectly calculated it could prevent allocation of ISO endpoint FIFO when bulk endpoints existed with smaller endpoint numbers. Minimum endpoint FIFO size is 16 32bit words, FIFO space requirement is now observed. | |||
| 2020-09-06 | Start of sampling works. | Reinhard Panhuber | |
| 2020-09-04 | Merge remote-tracking branch 'upstream/master' into uac2 | Reinhard Panhuber | |
| 2020-08-20 | Fix formatting, get rid of all tabs. | Reinhard Panhuber | |
| 2020-08-19 | Commit before sharing. | Reinhard Panhuber | |
| Setup a test example - UNTESTED! Missing: Start transmitting audio data in set_interface. | |||
| 2020-08-16 | Merge remote-tracking branch 'upstream/master' into uac2 | Reinhard Panhuber | |
| Conflicts: src/device/usbd.c src/device/usbd.h src/portable/st/synopsys/dcd_synopsys.c | |||
| 2020-08-16 | Add EP close. Fix bug in set_interface within audio. | Reinhard Panhuber | |
| 2020-08-14 | Add dcd_edpt_close() to synopsys | Jerzy Kasenberg | |
| Endpoint close was implemented only in one driver so far. This function is needed for interfaces with several alternate settings. The way FIFO is allocated in dcd_edpt_open() allows to correctly close only one IN endpoint (the one that was opened last). | |||
| 2020-08-12 | Fix synopsys fifo flush during stall | Jerzy Kasenberg | |
| Wrong FIFO was flushed in dcd_edpt_stall(). (epnum - 1) should only be used when accessing DIEPTXF registers. For DIEPCTL and GRSTCTL epnum is correct index. | |||
| 2020-08-05 | Merge pull request #476 from kasjer/kasjer/fix-synopsys-fix-iso-frame-bit | Ha Thach | |
| Fix synopsys odd/even frame bit for IN ISO endpoints | |||
| 2020-08-04 | Fix synopsys odd/even frame bit for IN ISO endpoints | Jerzy Kasenberg | |
| For ISO endpoint driver has to specify when data is to be transmitted (odd or even frame). Currently code was not updating this bit resulting in data being sent every other frame. If interval was 1ms full data packed was sent every 2ms, and ZLP was sent in between. | |||
| 2020-08-03 | Implement dynamic FIFO RAM allocation according to configuration desc. | Reinhard Panhuber | |
| 2020-08-01 | enable pull-up in dcd_init() instead of usbd | hathach | |
| 2020-07-31 | Fix synopsys size check for ISO endpoint | Jerzy Kasenberg | |
| Constraint was incorrect for ISO endpoint as stated in TODO. | |||
| 2020-07-29 | fix nested extern declaration of 'SystemCoreClock' [-Werror=nested-externs] | hathach | |
| 2020-07-27 | Implement dynamic reallocation of RX and TX fifos for EP0. | Reinhard Panhuber | |
| Tested with EP0 size 8/16/32/64. | |||
