| Age | Commit message (Collapse) | Author | |
|---|---|---|---|
| 2023-12-26 | allow rp2040 to use max3421e as host controller | hathach | |
| - fix warnings build hcd max3421 with rp2040 - add tinyusb_host_max3421 target for rp2040 cmake, -DMAX3421_HOST=1 will enable this - add max3421 driver implementation for rp2040 family - update tusb_config for host to allow easy enable host selection for rp2040 (default/pio-usb/max3421) | |||
| 2023-12-21 | dcd_nrf5x: Fix dcd_edpt_open for iso endpoint | Jerzy Kasenberg | |
| When ISO endpoint handling was introduced two lines that clear stall and data toggle bit were left unchanged and they were effective for ISO enadpoint as well. This is incorrect behavior since EPSTALL and DTOGGLE registers have only 3 bits for address. Leaving code that clears toggle bit results in endpoint 0 toggle bit being reset when iso endpoint (8) is opened. Now code that clears stall and toggle bit is applied to non-iso endpoint only as it was done before iso handling was introduced. | |||
| 2023-12-13 | Fix CI & typo. | HiFiPhile | |
| 2023-12-12 | Add Support stm32h5 for stm32h573i based on stm32_fsdev G0 implementation ↵ | henneboi | |
| Tested on Windows with IAR and gcc toolchain ( via cubeide) Tested only with audio examples, but sould be ok for other examples Cmake pacthed : but not tested Linux build : not tested Added a temporary workaround in make file to support H5 HAL repo ( ARMCC_VERSION=0) | |||
| 2023-11-29 | Merge pull request #2346 from IngHK/LogLineEnds | Ha Thach | |
| made log line end consistent \r\n | |||
| 2023-11-24 | made log line end consistent \r\n | IngHK | |
| 2023-11-24 | Merge branch 'master' into feature/ch32f20x | Ha Thach | |
| 2023-11-22 | fix h7 running on fullspeed phy has issue with WFI if not disable ULPI clock | hathach | |
| 2023-11-22 | add spec version to dwc2 info | hathach | |
| 2023-11-20 | add tuh_max3421_reg_read(), tuh_max3421_reg_read() for application usage | hathach | |
| added max3241 for feather m4 and tested | |||
| 2023-11-19 | Fix CI | HiFiPhile | |
| 2023-11-19 | Add dwc2 info of F429. | HiFiPhile | |
| 2023-11-03 | fix race condition when dev0 is removed while enumerating | hathach | |
| 2023-11-02 | skip tuh_max3421_spi_cs_api() in hcd_init() | hathach | |
| only call tuh_max3421_spi_cs_api() in SPI start/end transfer since Arduino port use this to call begin/endTransaction() | |||
| 2023-11-01 | remove legacy driver st/synopsys | hathach | |
| 2023-10-31 | Merge pull request #2300 from hathach/add-u5a5 | Ha Thach | |
| Add support for stm32u5a5 (highspeed with built-in femtoPHY) | |||
| 2023-10-31 | dwc2 flush tx,rx fifo in dcd_init() | hathach | |
| 2023-10-31 | usb on u5a5 hs work well with correct VBVALEXTOEN/VBVALOVAL set | hathach | |
| 2023-10-31 | minor clean up | hathach | |
| 2023-10-30 | minor space format dwc2 driver | hathach | |
| 2023-10-30 | addd dwc2_info.py/md update stm32u5a5 board clock & power configure, able to ↵ | hathach | |
| get passed otg clock reset | |||
| 2023-10-27 | update s3 devkitm with max3421 pin following metro s3, check max3421 version ↵ | hathach | |
| to make sure it is valid | |||
| 2023-10-18 | adding nulceo stm32u5a5, fix clock configure issue | hathach | |
| dwc2 core stuck at reset | |||
| 2023-10-18 | Merge pull request #2265 from bencowperthwaite/master | Ha Thach | |
| STM32U5 HS Support | |||
| 2023-10-06 | feat(ch32f20x): add support of ch32f20x | denis.krasutski | |
| 2023-10-04 | change tuh_max3421_spi_xfer_api() signature | hathach | |
| tested working with sam d21 and d51, not tested with nrf52, seem not working with esp32 | |||
| 2023-09-28 | fix build with new freertos host example | hathach | |
| 2023-09-27 | Merge branch 'master' into add-max3421-esp32 | hathach | |
| 2023-09-27 | change hcd_int_handler(rhport, in_isr) signature: add in_isr | hathach | |
| change tuh_int_handler() to take in_isr as optional parameter (default = true) | |||
| 2023-09-27 | update max3421 to have hcd_int_handler_ext() | hathach | |
| 2023-09-26 | Added support for USB2 HS peripheral (with integrated HS PHY) on STM32U59x chips | bac | |
| 2023-09-25 | adding host/cdc_msc_hid_freertos example | hathach | |
| 2023-09-18 | add default CFG_TUH_MAX3421 = 0, default spi speed for samd21/samd51 to 12Mhz | hathach | |
| 2023-09-12 | Merge pull request #2245 from arduino/fix_msd_extraneus_bytes_on_reading | Ha Thach | |
| Fix msd extraneus bytes on reading | |||
| 2023-09-09 | minor rename | hathach | |
| 2023-09-08 | wait_pipe_fifo_empty() now returns bool (as expected using TU_ASSERT macro) | maidnl | |
| 2023-09-08 | renesas: added wait function for IN transaction | maidnl | |
| This fixes a problem found on MSD class where data read from from disks were sometimes partially overwritten by the status MSD message ("USBS..."). The function introduced wait for the hw fifo pipe to be empty, that prevent that new writing in the fife overwrite data which are not yet be transmitted by hw. | |||
| 2023-09-07 | - wrap up hcd max3421, work well with nrf52840 | hathach | |
| - also add usbh_defer_func() | |||
| 2023-08-31 | vastly improve attach/detach device, still have issue where thing is still ↵ | hathach | |
| hanged occasionally. | |||
| 2023-08-31 | improve connection & disconnection detection. But there is still issue when ↵ | hathach | |
| CONDETIRQ occurs but we are disabled interrupt (for osal queue access). | |||
| 2023-08-30 | use ep buf to keep setup packet, work well with hid device | hathach | |
| 2023-08-30 | call xfer_complete_isr() when result is not successful (stalled or failed) | hathach | |
| 2023-08-29 | - hcd_setup_send() also check for busy flag | hathach | |
| - xact_inout() to support send setup | |||
| 2023-08-29 | - correct tuh_max3421e_int_api() for nrf52 | hathach | |
| - hcd_int_disable/enable is software only to reduce interrupt lag | |||
| 2023-08-28 | - add xfer_complete_isr() | hathach | |
| - merge addr0 ep to pool - add control status to xact in/out - use atomic flag busy to ensure only 1 transfer is active at any time - execute pending transfer after one is complete (or clear busy flag) - change rtt mode to block if full | |||
| 2023-08-27 | more update to transaction | hathach | |
| 2023-08-25 | try next endpoint when received NAK | hathach | |
| 2023-08-25 | add xact_out(), xact_in() to manage transfer | hathach | |
| 2023-08-25 | use endpoint pool for more flexible multiple devices support | hathach | |
| 2023-08-25 | add osal mutex for spi | hathach | |
 |
index : tinyusb.git | |
| Unnamed repository; edit this file 'description' to name the repository. |
| summaryrefslogtreecommitdiff |