summaryrefslogtreecommitdiff
path: root/src/portable
AgeCommit message (Collapse)Author
2023-01-31Merge pull request #1779 from P33M/rp2040_device_babble_fixHa Thach
rp2040: avoid device-mode state machine hang
2023-01-31fix typoshathach
2023-01-31move errata to end of c filehathach
2023-01-31add e15 prefix or walkaround related functions, also minor refactorhathach
2023-01-31minor clean uphathach
2023-01-30fix typohathach
2023-01-30Merge branch 'master' into port-ft90xHa Thach
2023-01-24rp2040: shuffle hw_endpoint membersJonathan Bell
Ordering by element size prevents alignment holes, and as a consequence the host mode version of the struct is the same size as device, as pad bytes at the end are used instead.
2023-01-24rp2040: avoid device-mode state machine hangJonathan Bell
Don't mark IN buffers as available during the last 200us of a full-speed frame. This avoids a situation seen with the USB2.0 hub on a Raspberry Pi 4 where a late IN token before the next full-speed SOF can cause port babble and a corrupt ACK packet. The nature of the data corruption has a chance to cause device lockup. Use the next SOF to mark delayed buffers as available. This reduces available Bulk IN bandwidth by approximately 20%, and requires that the SOF interrupt is enabled while these transfers are ongoing. Inherit the top-level enable from the corresponding Pico-SDK flag. Applications that will not use the device in a situation where it could be plugged into a Pi 4 or Pi 400 (for example, when directly connected to a commodity hub or other host) can turn off the flag in the SDK. v2: use a field in hw_endpoint to mark pending. v3: Partial rewrite following review comments - Stub functions out if the workaround is not required - Only force-enable SOF while any vulnerable endpoints are active - Respect dcd_sof_enable() functionality - Get rid of all but necessary ifdef hackery - Fix a bug where the "endpoint lock" was used with an uninitialised pointer.
2023-01-23rp2040: export hw_endpoint_start_next_buffer() and hw_endpoint_lock_update()Jonathan Bell
The next change to the driver requires the export of these functions. Leave the lock unimplemented for now. Also move hw_set and hw_clear aliases into the top-level header file.
2023-01-18Merge pull request #1847 from HiFiPhile/dwc2_iarHa Thach
dwc2: fix iar warnings
2023-01-12Merge pull request #1405 from gregdavill/ch32v307Ha Thach
Add WCH CH32V307 port
2023-01-12add dcd_remote_wakeup() stubhathach
2023-01-12rename driver with dcd_ to be consitent with other portshathach
2023-01-12add note for openocd with wch, also add wch-riscv.cfghathach
2023-01-11dwc2: fix IAR warnings.MasterPhi
2023-01-09Merge pull request #1843 from HiFiPhile/ip3511Ha Thach
ip3511 : Fix IAR build.
2023-01-08ip3511 : Fix IAR build.MasterPhi
2023-01-07Merge branch 'master' into ch32v307Ha Thach
2023-01-05Add fix to dcd_edpt_iso_activate()Mengsk
2023-01-05Fixed bug where with some devices, the TU_ASSERT inserted with this commit ↵Simon Kueppers
gets triggered for ISOCHRONOUS endpoints. It is necessary for those endpoints to set the NUM_BLOCK and BLSIZE for the receiving buffer in both, USB_COUNTn_TX and USB_COUNTn_RX. Despite the datasheet showing those fields only for the USB_COUNTn_RX register
2023-01-03Fix typo in audio.h. Specifiy _ctrl_xfer struct in CFG_TUSB_MEM_SECTIONpete-pjb
Add NULL check to loop in list_remove_qhd_by_addr() function in ehci.c
2023-01-02Remove tu_stm32_sof_cbMengsk
2023-01-02Clean up.Mengsk
2022-12-30Fix buffer allocation overflow.Mengsk
2022-12-30Add ISO buffer allocation.Mengsk
2022-12-29Do not set USB_EP_RX_NAK for ISO EP.Mengsk
2022-12-29Fix CI.Mengsk
2022-12-29Add dcd_edpt_iso_alloc() / dcd_edpt_iso_activate() for ISO EP buffer management.Mengsk
2022-12-29Generally enable ISO xfer.Mengsk
2022-12-29Add hardware endpoint allocator.Mengsk
2022-12-29dcd_stm32_fsdev : Implement FIFO transfer correctly.Mengsk
2022-12-29dcd_stm32_fsdev : Fix index out of bound in dcd_write_packet_memory()Mengsk
If src is odd then src[wNBytes] is accessed.
2022-12-29Added improvements with regards to SOF timing jitterSimon Kueppers
2022-12-29Added TU_ATTR_ALWAYS_INLINE to all static inline functionsSimon Kueppers
2022-12-29Fixed various small problems and inaccuracies regarding ISOCHRONOUS endpointSimon Kueppers
2022-12-29SHA-1: 5cb3ed518301e2237ee4e468e97e51ece0ba3838Mengsk
* Correct handling of SOF interrupt
2022-12-29Merge branch 'master' of https://github.com/hathach/tinyusb into stm32_fsdevMengsk
2022-12-29Fixed problem where the transmit byte count was written into the wrong ↵Simon Kueppers
register on ISOCHRONOUS endpoints
2022-12-29Renamed pcd_set_ep_rx_cnt because it actually sets the maximum buffer sizeSimon Kueppers
2022-12-29Changed comments, added define to fail if ISOCHRONOUS endpoint is not ↵Simon Kueppers
available but requested
2022-12-29Fixed non-aligned allocated memory sizesSimon Kueppers
2022-12-29Changed indirection from actual endpoint address to hardware endpoint ↵Simon Kueppers
through lookup table. Allocation of endpoint is now only performed in dcd_edpt_open
2022-12-29Fixed wrongly enabling RX and TX status simultaneously on ISOCHRONOUS endpointsSimon Kueppers
2022-12-29Implemented an optional callback function that is used instead of ↵Simon Kueppers
tu_edpt_number in the stm32 device driver as a crude tool to control mapping of the endpoint address to actual endpoint register
2022-12-29Implemented very rudimentary support for isochronous transfer buffer handlingSimon Kueppers
2022-12-04more typoshathach
2022-12-04Fix typosBastien Nocera
2022-11-30Merge branch 'hathach:master' into port-ft90xGordon McNab
2022-11-30more clean uphathach
generated by cgit v1.3.1 (git 2.54.0) at 2026-08-21 00:28:30 +0000