| Age | Commit message (Collapse) | Author |
|---|
|
Groundwork for TinyUSB's first SuperSpeed port (WCH CH569):
- TUSB_SPEED_SUPER, OPT_MODE_SUPER_SPEED, TUD_OPT_SUPER_SPEED and
TUP_RHPORT_SUPERSPEED capability plumbing
- Allow CFG_TUD_ENDPOINT0_SIZE 512 on SS builds; EP0 control transfers
chunk at the runtime link speed (512 at SS, 64 on USB2 fallback)
- Handle SET_SEL, SET_ISOCH_DELAY and U1/U2_ENABLE feature requests
- Tolerate SS endpoint companion descriptors in usbd_open_edpt_pair,
cdcd_open and mscd_open interface parsing
- SS descriptor types/structs and template macros: endpoint companion,
BOS USB2-extension + SuperSpeed capability, SS config and
CDC/MSC/vendor SS variants (bulk fixed at 1024)
- cdc_msc example: SS device/config/BOS descriptors, speed-aware sizes
- Unit tests: SS endpoint validation, companion-tolerant endpoint pair
open, SET_SEL, SET_ISOCH_DELAY
All SS paths compile out when disabled: verified 0-byte code-size delta
on stm32f407disco (MinSizeRel) vs master; 65/65 unit tests pass.
Co-Authored-By: Claude Fable 5 <[email protected]>
|
|
* license: use SPDX identifiers for src/ headers
Replace the full ~20-line MIT license boilerplate on every src/ file with a
two-line SPDX tag (SPDX-FileCopyrightText + SPDX-License-Identifier), following
the REUSE convention used by CircuitPython and the Linux kernel. Removes ~3500
lines of duplicated boilerplate.
|
|
- src/tusb.c: extend tu_str_xfer_result[] with "ABORTED" and "INVALID"
to match the new enum size. Not reachable today (no HCD posts those
values through hcd_event_xfer_complete), but keeps the enum/table
invariant intact so future HCDs that surface ABORTED don't index OOB.
- examples/dual/dynamic_switch/src/main.c: apply the same while(1)
hoist already done for cdc_task / print_devinfo_task to
led_blinking_task. On OS_NONE the loop returned mid-iteration, which
on first call could fire multiple back-to-back toggles while
start_ms (initially 0) caught up to uptime.
Co-Authored-By: Claude Opus 4.7 <[email protected]>
|
|
endpoint state handling methods and accesses
|
|
|
|
|
|
|
|
|
|
implement tusb_time_millis_api() with osal_time_millis() when OS is not NONE
|
|
Signed-off-by: HiFiPhile <[email protected]>
|
|
Signed-off-by: HiFiPhile <[email protected]>
|
|
Signed-off-by: HiFiPhile <[email protected]>
|
|
Signed-off-by: HiFiPhile <[email protected]>
|
|
update vendor_device.c for direct usbd xfer when either RX/TX BUFSIZE is 0 i.e CFG_TUD_VENDOR_TXRX_BUFFERED = 0
|
|
limit fifo read size to ep_bufsize regardless ep_buf is used or not
|
|
|
|
Signed-off-by: HiFiPhile <[email protected]>
|
|
Signed-off-by: HiFiPhile <[email protected]>
|
|
|
|
|
|
of bool. help to simplify parsing configuration
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Signed-off-by: Zixun LI <[email protected]>
|
|
CFG_TUSB_EDPT_STREAM_NO_FIFO_ENABLED
|
|
vendor_write_flush() and write_available() only available when CFG_TUD_VENDOR_TX_BUFSIZE > 0
|
|
CFG_TUD_VENDOR_RX_BUFSIZE = 0
update vendor device to omit ep buf when dedicated hwfifo is supported
|
|
|
|
|
|
cdc device omit ep buffer when hwfifo is supported
|
|
copilot/fix-dcd-edpt-xfer-issue
Signed-off-by: HiFiPhile <[email protected]>
|
|
|
|
tu_edpt_stream_open() does not clear fifo, allow for persistent stream when disconnect/reconnect
|
|
also add tud_midi_n_packet_write/read_n()
|
|
copilot/fix-dcd-edpt-xfer-issue
Signed-off-by: HiFiPhile <[email protected]>
|
|
|
|
fix more alerts
disable IAR CStat since pvs-studio check is better integrated with clion
|
|
copilot/fix-dcd-edpt-xfer-issue
Signed-off-by: HiFiPhile <[email protected]>
|
|
|
|
- Added bool is_isr parameter to usbd_edpt_xfer() and usbd_edpt_xfer_fifo() wrapper functions
- These are called by class drivers to queue USB transfers
- Updated all callers to pass false by default (non-ISR context)
- Updated audiod_rx_xfer_isr() and audiod_tx_xfer_isr() to pass true (ISR context)
- All 21 unit tests pass
Co-authored-by: HiFiPhile <[email protected]>
|
|
Signed-off-by: HiFiPhile <[email protected]>
|
|
|
|
|
|
512 bytes for bulk in fullspeed mode.
|
|
|
