| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
Port stm32u5xx
|
|
Add support for MJPEG on UVC
|
|
Allow more endpoint packet sizes for SAMD
|
|
On ESP32-S2/S3 ISO transfers must be configured for even or odd frame.
Closes https://github.com/hathach/tinyusb/issues/1382
|
|
|
|
|
|
|
|
audio_device: prototype added for function referenced before use
|
|
|
|
|
|
|
|
|
|
accidental writes
|
|
Initial PIC32MM/MX & PIC24 support
|
|
|
|
|
|
|
|
|
|
|
|
IAR generates warning Pe161 'unrecognized #pragma'.
|
|
IAR generates warning Pa167 'the "fallthrough" attribute is not supported'.
It doesn't generate warnings when one switch case falls through to another,
so simply make TU_ATTR_FALLTHROUGH expand to an empty string.
Also replace one instance of __attribute__ with the macro.
|
|
IAR generates warning Pe546 'transfer of control bypasses initialization of
variable "invInvTag"'.
|
|
This affects struct rspMsg in usbtmc_app.c (unconditionally) and uint8_t
termChar in usbtmc_device.c (when NDEBUG is defined). IAR generates warning
Pe550 'variable was set but never used'.
|
|
IAR generates warning Pa089 'enumerated type mixed with another enumerated
type'.
|
|
IAR generates warning Pe188 'enumerated type mixed with another type'.
|
|
IAR generates warning Pe111 'statement is unreachable'. In a couple of
cases, replace return statements with TU_ATTR_FALLTHROUGH; because some
compilers apparently can't figure out that the return statements are
unreachable but do whinge about an imagined fall-through without them!
|
|
This is a GCC extension, illegal in ISO C. IAR generates errors Pa152
'these operand types cannot be used here' and Pe852 'expression must be a
pointer to a complete object type'.
Replace with uint8_t*.
|
|
|
|
|
|
Fix bug #1628 by preventing shared irq slots for filling up
|
|
ISO packet size is up to 1023 for full speed device.
Upon completion of ISO reception, reported length of incoming packet
was truncated to one byte only.
This results in incorrect data stream for higher bit rates
48 samples * 4 bytes per sample * 2 channels = 384 bytes of data
and 128 was reported.
There is no change in logic extending xact_len to uint16_t fixes the issue.
|
|
|
|
Some compilers don't support the GNU extension `typeof` so their definitions
of `hw_set_alias` can't inherit their type from their argument, and the best
we can do is have `hw_set_alias` act the same as `hw_set_alias_untyped`.
This requires an explicit cast when the macro is used instead, otherwise
IAR generates error Pe132 'expression must have pointer-to-struct-or-union
type but it has type "void *"'.
The same goes for `hw_clear_alias`.
|
|
IAR generates error Pe118 'a void function may not return a value'.
|
|
|
|
|
|
Field started (regardind transfer) was only cleaed when transfer
was finished.
For audio devices set interface is called many times.
When there is no audio (silence) set interface requests zero
lenght bandwithd that in turn calls dcd_edpt_close().
When endpoint is closed due to set interface request transfer
should not longer be started since it will block next start transfer
with assert.
This just sets 'started' to false when endpoint is closed.
|
|
increase version to 0.14.0 for release
|
|
Host hub clear port and device interrupts
|
|
|
|
|
|
nrf5x: Fix DMA access
|
|
|
|
|
|
dfu_moded_open() only works correct when its called on DFU interface
descriptor. It means that DFU is the only one interface in configuration
or driver is called after all others interface drivers were tried and
gave up.
If other interface is supported and but driver for DFU is called first
(this is the case for BTH and RNDIS).
Code after while loop (that was not entered) has an TU_ASSERT that will
make set_configuration to fail.
Now TU_VERIFY is called first to make sure open code is called for DFU
only and not other interface descriptors like in other drivers.
|
|
|
|
Fix typo in audiod_rx_done_cb in audio_device.c
|
|
along with minor doc update
|
