summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2020-10-18Allow use of internal FS PHY on OTG_HS interfaceJacob Potter
Some ST parts (like STM32F74xxx / STM32F75xxx) allow the USB_OTG_HS core to be used with either an external high-speed ULPI PHY or an internal full-speed-only (12mbps) PHY. Currently the code assumes than an ULPI PHY is used unless the chip has an internal high-speed PHY (`#if defined(USB_HS_PHYC)`), with no provision to use the internal FS PHY.
2020-10-15audio: Add two channel feature unit descriptorJerzy Kasenberg
Feature unit descriptor size depends on number of channels. So far only single channel feature unit was present. This change adds feature unit descriptor for two channels.
2020-10-13osal_none: Fix queue definitionJerzy Kasenberg
OSAL_QUEUE_DEF was not updated while FIFO was changed to use unmasked pointers. Two fields that are crucial to new functionality were left uninitialized resulting in FIFO slowing down in time.
2020-10-13more clean uphathach
2020-10-13clean uphathach
2020-10-13implement tuh_msc_scsi_inquiry() / tuh_msc_read_capacity() / ↵hathach
tuh_msc_get_maxlun()
2020-10-13rework msc hosthathach
- msc host enum is now async - implement async tuh_msc_scsi_command() / tuh_msc_request_sense() / tuh_msc_test_unit_ready()
2020-10-12add usbh_edpt_claim/releasehathach
implement USBH_EVENT_FUNC_CALL
2020-10-11Merge branch 'master' into host-async-controlhathach
2020-10-11Merge pull request #525 from kasjer/kasjer/da1469x-isoHa Thach
da1469x iso support
2020-10-11Merge pull request #520 from salkinium/feature/misc_enhancementsHa Thach
STM32F3 IRQ remap option and some minor improvements
2020-10-10Merge pull request #521 from PanRe/uac2Ha Thach
Uac2
2020-10-10Dynamically check STM32F3 IRQ remap optionNiklas Hauser
2020-10-09Revert dcd_alloc_mem_for_conf() but keep changes from @kasjer for ISO EPReinhard Panhuber
Add tud_audio_set_itf_close_EP_cb()
2020-10-09update tud_hid_boot_mode_cb/tud_hid_set_idle_cb support mul interfaceshathach
also clean up code
2020-10-09rename multiple hid callbackhathach
2020-10-09Merge pull request #524 from zlittell/f_MultipleHIDInterfacesHa Thach
Feature multiple hid interfaces
2020-10-08Fix tu_verify argsZachery Littell
2020-10-08Cleanup per review on PRZachery Littell
2020-10-08DA146xx: Allow transmitting of packets larger then 64 bytesJerzy Kasenberg
FIFO is limited to 64 bytes yet MCU is capable of transmitting larger packets provided that FIFO will be filled on the fly and USB_USB_TXCx_REG_USB_LAST_Msk bit is set after FIFO is filled with all the data that should be transmitted. This change allows to use FIFO level warning interrupt to fill FIFO. When DMA is available it will be used instead of interrupts. Some function names were changed to better reflect what each function does.
2020-10-08DA146xx: Add support for ISO endpointsJerzy Kasenberg
Few changes were needed to have working ISO endpoints.
2020-10-08DA146xx: Add dcd_edpt_closeJerzy Kasenberg
Closing endpoints can be important when there are alternate instances. This adds functionality of closing endpoints similar to what exists in other drivers.
2020-10-08DA146xx: Allow receiving of packets larger then 64 bytesJerzy Kasenberg
Internal FIFO for each endpoint is limited to 64 bytes. It is possible to have longer packets if respective FIFO is read during actual packet transmission. This change updates receive data path to allow packets (and endpoint size) larger then 64 bytes. If DMA is not used yet DMA is setup for reception of big packets. If DMA is already assigned to some transfer, code enables FIFO level warning interrupts and tries to read data before FIFO is filled up.
2020-10-07fix variable names. add itf n callbacks to multihidZachery Littell
2020-10-07Remove CFG_TUD_AUDIO_TX_DMA_RINGBUFFER_SIZE which is not needed any moreReinhard Panhuber
2020-10-07Merge pull request #529 from gh2o/stm32-raceHa Thach
stm32 fsdev: fix ISTR and CTR_RX/TX race conditions
2020-10-07tab -> spaceshathach
2020-10-07fix audio_test buildhathach
2020-10-06stm32: fix ISTR and CTR_RX/TX race conditionsGavin Li
2020-10-06Merge branch 'uac2' of https://github.com/PanRe/tinyusb into PanRe-uac2hathach
2020-10-06Merge pull request #516 from PanRe/tusb_fifo_unmaksed_pointersHa Thach
Tusb fifo unmaksed pointers
2020-10-03Change CFG_TUSB_CONFIG_FILE mechanism to improve header file scanningNiklas Hauser
2020-10-03Allow overwriting TU_ASSERT etc macrosNiklas Hauser
2020-10-03Use tu_printf instead of printfNiklas Hauser
2020-10-03Use C++11 static_assert when availableNiklas Hauser
2020-10-03Revert #define CFG_TUSB_DEBUG 2 to #define CFG_TUSB_DEBUG 0Reinhard Panhuber
Change 1 << 31 to 0x100000000 in audio.h
2020-10-02fix simple pull request comments. Implement descriptor index hack.Zachery Littell
2020-10-02Merge pull request #518 from kasjer/kasjer/nrf5x-iso-supportHa Thach
nrf5x iso support
2020-10-01add index to report descriptor callback. this is breaking and needs to be ↵Zachery Littell
reviewed
2020-10-01create N functions and inlines for multi hid interfacesZachery Littell
2020-10-01Change AUDIO_CS_INTERFACE_HEADER to AUDIO_CS_AC_INTERFACE_HEADERReinhard Panhuber
2020-10-01nrf5x: Add support for ISO endpointsJerzy Kasenberg
ISO endpoints were not covered so far by the driver code. This adds support for ISO IN and OUT endpoint handling. Registers for ISO IN(OUT) endpoints are placed just after normal IN(OUT) so in some cases common code could be used for handling all type of transfers. Generally code synchronizes ISO endpoint handling to SOF interrupt. This code does not change the way of how non-ISO endpoints are treated. Code uses strategy outlined in nRF52840 Produce Specification v1.0 sections 6.35.11.1 and 6.35.11.2.
2020-10-01nrf5x: Increase size of mps to 16 bitsJerzy Kasenberg
msp stores max packet size. For ISO endpoints 8 bits is not enough so it's changed to 16 bits.
2020-10-01nrf5x: Add dcd_edpt_closeJerzy Kasenberg
Closing endpoints can be important when there are alternate instances. This adds functionality of closing endpoints similar to what exists in other drivers.
2020-10-01device: Make number of endpoints configurableJerzy Kasenberg
Currently number of endpoints was hard coded to 8. NRF52 has 9 IN and 9 OUT endpoints. ISO endpoints are 0x08 and 0x88 and without this change those two ISO endpoint could not be used.
2020-09-29Change AUDIO_FUNC_PROTOCOL_CODE_UNDEF for midi in usbd.hReinhard Panhuber
2020-09-28Change AUDIO_PROTOCOL_V1 to AUDIO_FUNC_PROTOCOL_CODE_UNDEF in midi.c.Reinhard Panhuber
The USB specification does not define any AUDIO_PROTOCOL_V1!
2020-09-28Fix minor issue.Reinhard Panhuber
- Change set_EP0_max_pkt_size() to set_EP0_max_pkt_size(void).
2020-09-28Cleanup for PR.Reinhard Panhuber
2020-09-28Merge remote-tracking branch 'upstream/master' into uac2Reinhard Panhuber
generated by cgit v1.3.1 (git 2.54.0) at 2026-08-29 12:45:05 +0000