| Age | Commit message (Collapse) | Author |
|---|
|
Groundwork for TinyUSB's first SuperSpeed port (WCH CH569):
- TUSB_SPEED_SUPER, OPT_MODE_SUPER_SPEED, TUD_OPT_SUPER_SPEED and
TUP_RHPORT_SUPERSPEED capability plumbing
- Allow CFG_TUD_ENDPOINT0_SIZE 512 on SS builds; EP0 control transfers
chunk at the runtime link speed (512 at SS, 64 on USB2 fallback)
- Handle SET_SEL, SET_ISOCH_DELAY and U1/U2_ENABLE feature requests
- Tolerate SS endpoint companion descriptors in usbd_open_edpt_pair,
cdcd_open and mscd_open interface parsing
- SS descriptor types/structs and template macros: endpoint companion,
BOS USB2-extension + SuperSpeed capability, SS config and
CDC/MSC/vendor SS variants (bulk fixed at 1024)
- cdc_msc example: SS device/config/BOS descriptors, speed-aware sizes
- Unit tests: SS endpoint validation, companion-tolerant endpoint pair
open, SET_SEL, SET_ISOCH_DELAY
All SS paths compile out when disabled: verified 0-byte code-size delta
on stm32f407disco (MinSizeRel) vs master; 65/65 unit tests pass.
Co-Authored-By: Claude Fable 5 <[email protected]>
|
|
* device: clamp EP0 OUT data copy to the control transfer buffer
usbd_control_xfer_cb() copied xferred_bytes from the EP0 bounce buffer
into the requester's buffer with no bound. A non-compliant host that
sends an OUT data packet larger than the control transfer's data_len
(= min(len, wLength), the buffer capacity) would overflow that buffer
and over-count total_xferred. Clamp xferred_bytes to the remaining
buffer space before the memcpy and accounting.
|
|
Brings the MIDI 2.0 device driver into full conformance with USB
Device Class Definition for MIDI Devices v2.0 (USB-IF, May 2020).
- Alt 1 MS Interface Header wTotalLength now reports 0x0007 per
Table 5-2 ("set to match bLength"), replacing the prior 0x0011
carried over from USB-MIDI 1.0 conventions.
- GET_DESCRIPTOR class request now validates bmRequestType direction,
type and recipient plus wIndex and wValue high byte per Section 6.
- iBlockItem in the default Group Terminal Block is driven by
CFG_TUD_MIDI2_BLOCK_STRIDX so applications can attach a UI string
descriptor to the block per Table 5-6.
- UMP word byte order assumption (little-endian host per Section
3.2.2) is documented inline so future big-endian ports know where
to wrap access with tu_htole32 / tu_le32toh.
Validated on RP2040 and ESP32-P4 under Linux kernel 6.17: lsusb -v
reports wTotalLength = 0x0007 on Alt 1 MS Header (raw bytes
07 24 01 00 02 07 00). amidi -l enumerates Group Terminals exposed
via the class-specific GET_DESCRIPTOR response.
|
|
Add unit tests for MIDI 2.0 drivers:
- Device: UMP word count (all 16 message types), descriptor macro
validation (length, byte layout, alt settings, endpoints),
CS endpoint subtypes, traversal integrity
- Host: UMP word count, callback struct validation, CS endpoint
subtypes
Also add Sphinx documentation for MIDI 2.0 class drivers (Device
and Host API reference, lifecycle, configuration, examples).
Tests: 60/60 PASS (FIFO 26/26, USBD 5/5, MIDI2 Device 18/18,
MIDI2 Host 6/6, USBD internal 5/5)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
copilot/fix-dcd-edpt-xfer-issue
Signed-off-by: HiFiPhile <[email protected]>
|
|
fix compiling with nuc family
|
|
Co-authored-by: HiFiPhile <[email protected]>
|
|
|
|
|
|
* fixed unit test with ceedling 1.0.0
|
|
is required for host and some device without RTOS.
|
|
|
|
consistent
|
|
|
|
|
|
update tusb_init() to take rhport and role, defined as macro with optional argument for backward compatible
|
|
|
|
|
|
- switch unit test back to gcc, since path to clang conflict on local setup (x86 and arm)
|
|
- fix ceedling with ruby 3.1
- allow overwrite CMAKE_C_COMPILER/CMAKE_CXX_COMPILER from command line
|
|
|
|
|
|
temporarily disable codespell
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
