tinyusb.git - Unnamed repository; edit this file 'description' to name the repository.

Age	Commit message (Collapse)	Author
2014-02-19	some code clean up	hathach
	NOTE: host on ea4357 does not work anymore
2014-01-24	clean up warnings	hathach

2013-12-11	fix error in dcd_lpc175x_6x (still has problem with control transfer)	hathach
	fix build error for host start to add keil support for device opt out pca9532.c when ea4357 is not the selected board
2013-12-09	complete dcd 17xx control xfer with soft DMA	hathach
	keyboard LED set report run ok with lpc17xx there is problem with cdc set line encoding
2013-12-09	house keeping, lpc43xx works okie	hathach

2013-12-09	refractor dcd lpc43xx control xfer (with int on complete)	hathach

2013-12-09	minor refractor	hathach

2013-12-09	add keyboard led mask	hathach
	make usbd control request to subtask add get/set report via control pipe to hidd enforce soft DMA to control pipe for lpc11u (lpc17xx not yet) temp add led_blinking_set_interval to change led blinking interval refractor dcd_pipe_control_xfer to have interrupt on complete option add get/set report support of moused_app and keyboardd_app, keyboard LED will make LED blink faster
2013-12-02	add board lpclink2, able to run device stack without any problems	hathach

2013-12-01	adjust packet per TD for lpc13u is 1023, 11u is 64	hathach

2013-12-01	correct stall & clear stall behavior for non-control pipe	hathach
	fix data_residue when read10, write10 return 0 (no need for BE conversion)
2013-12-01	change class_ixr to class_cb	hathach
	use IAD whenever enable CDC to make sure windows driver can detect change keyboard, mouse send report to int_on_complete = true
2013-12-01	tested with lpc13u	hathach

2013-11-30	code clean up	hathach

2013-11-30	completely change the dcd for lpc11u & lpc13u to overcome the fact that ↵	hathach
	lpc11u dma cannot transfer more than 64 bytes each buffer. This implement an soft DMA for lpc11u & lpc13u (previously 1023 max) queued transfer
2013-11-26	house keeping	hathach

2013-11-26	change endian conversion to native to be & be to native	hathach
	completely deferred xfer isr event to usbd task complete read10, write10 sequence for large data transfer
2013-11-25	refractor usbd task	hathach
	move control request data into task event adding tusbd_msc_read10_cb, tusbd_msc_write10_cb (not fully supported)
2013-11-25	change MCU to TUSB_CFG_MCU	hathach

2013-11-22	temp fix for dcd 43xx suspend detection (disconnection does not generate ↵	hathach
	interrupt)
2013-11-22	clean up	hathach
	add some doxygen work finalize device disconnection & suspend - suspend & resume & remote wake up is not supported yet
2013-11-21	fixed lpc11u/13u VBUS (P0_3) with pulldown resistor for USB_VBUS_DEBOUNCED ↵	hathach
	is correct added disconnect callback for lpc11u/13u
2013-11-21	add class mounted callback for hid mouse/keyboard & refractor mouse/keyboard app	hathach

2013-11-21	refractor usbd-dcd callback, add bus event isr	hathach

2013-11-20	fixed dcd lpc17xx queue transfer & IOC handling	hathach
	able to run MSC demo
2013-11-20	refractor descriptor	hathach

2013-11-20	house keeping	hathach

2013-11-20	add sw int_on_complete support for dcd lpc17xx	hathach

2013-11-19	complete dcd for lpc175x_6x	hathach
	cdc device demo can work but there is hardfault with dma descriptor with fast typing
2013-11-18	get lpc17xx running through enumeration (with control data < 64)	hathach

2013-11-16	fix dcd_pipe_control_xfer for dcd43xx	hathach
	refractor tusb_descriptors.h
2013-11-15	IAD support	hathach

2013-11-15	add semaphore for control xfer for > 64 support for some mcu such as ↵	hathach
	lpc11u/lpc17xx
2013-11-15	refractor usbd's get descriptor	hathach

2013-11-15	separate data & status from dcd_pipe_control_xfer	hathach

2013-11-15	refractor usbd, first step to make get configuration as sub task	hathach

2013-11-15	add usbd_task to handle event task eg setup received	hathach

2013-11-15	fix build error with device 43xx	hathach
	refractor mscd ramdisk demo
2013-11-14	complete double buffering for queueing xfer for lpc11u/13u requried by msc ↵	hathach
	device
2013-11-13	fix potential issue with stall endpoints	hathach
	NOTE: cannot able to STALL control OUT endpoints --> unsupported with data out request may got to an issue. clean up configure, add max string descriptor configure as windows sometimes ask for string @ index 238 !!!
2013-11-13	able to build and run cdc device demo on lpc11uxx	hathach

2013-11-11	technically, mouse + keyboard device demo also work on lpc13uxx	hathach

2013-11-11	remove xfer_type in endpoint_handle_t	hathach
	cdc device demo runs on lpc13uxx
2013-11-11	adding support for lpc13uxx	hathach

2013-11-08	add windows driver for cdc	hathach
	add simple echo cdc serial demo add cdc device send/receive API refractor descriptor refractor cdc.h add usbd driver function - init - bus_reset
2013-11-07	clean up tusb_descriptors	hathach

2013-11-06	fix a bug with USB1, but still cannot get interrupt occurred on USB1	hathach

2013-11-06	refractor for device able to work on usb1 of lpc43xx. But could not get it ↵	hathach
	work on EA4357
2013-11-06	refractor dcd_controller_reset & hcd_controller_reset to hal_controller_reset	hathach

2013-11-01	added support for	hathach
	- sense data scsi_sense_fixed_data_t - read format capacity scsi_read_format_capacity_data_t change msc device callback to support actual response fix dcd_pipe_clear_stall also reset toggle