summaryrefslogtreecommitdiff
path: root/tinyusb/host/ehci/ehci.c
AgeCommit message (Collapse)Author
2018-03-06remove tusb_isr(), rename hal_hcd_isr() and hal_dcd_isr()hathach
2018-03-02clean up compilerhathach
2014-04-29fix/correct the max_loop (upper bound for EHCI & OHCI) endpoint list. This ↵hathach
causes multiple devices hub mounting problems previously
2014-04-18move osal_queue_send of osal_none to osal_none.chathach
2014-04-17clean up STATIC_VARhathach
2014-04-13merge EHCI_MAX_QHD/QTD and OHCI_MAX_QHD/QTD to HCD_MAX_ENDPOINT/XFER and ↵hathach
scale with number of enabled classes. default config to support up to 5 device (hub + 4 others)
2014-03-13remove legacy code of msc_device.c read10 & write10hathach
clean up some warnings
2014-03-13fix some warningshathach
2014-03-10change IAR TUSB_CFG_ATTR_USBRAM to _Pragma("location=\".ahb_sram1\"") ↵hathach
instead of @ .ahb_sram1 so that we can place it before the variable for a cleaner code change pipe xfer API buffer from void* to uint8_t* change FIFO_DEF to have a separated buffer to be compatible with IAR\ refractor IAR data alignment pragma
2014-02-28EHCI: immediately reset port when device connected. This proves to help ↵hathach
prevent duplication connection event (also with OHCI) increase delay after reset to 100 ms (NXP's EHCI does not work with 50ms) --> fix all duplication connection with OHCI & EHCI
2014-02-20use hcd_pipe_is_busy instead of hcd_pipe_is_idlehathach
remove hcd_pipe_is_idle
2014-02-19re-enable blocking waiting in ehci controller reset (otherwise it wont works)hathach
2013-12-19remove immediately reset when device plug.hathach
check to make sure device is still plug after initial delay (200ms) before reset remove blocking waiting when reset in ehci.c
2013-12-18able to run MSC host demo on lpc17xxhathach
implement walk around for halted ED in OHCI
2013-12-16implement ohcihathach
- hcd_port_reset - hcd_port_connect_status - hcd_port_speed_get - hcd_pipe_control_open - hcd_pipe_control_xfer - done_queue_isr for control xfer able to go through enumeration with MSC device
2013-12-11add structure & define for ohcihathach
2013-11-25change MCU to TUSB_CFG_MCUhathach
2013-11-06refractor dcd_controller_reset & hcd_controller_reset to hal_controller_resethathach
2013-11-01implement msc device classhathach
usbd auto stall control for not supported return from class control request usbd implement xfer isr callback mechanism DCD - implement dcd multiple qtd support - dcd dcd_pipe_stall - implement dcd_pipe_queue_xfer - xfer_complete_isr - flush control endpoint if received new setup while previous transfer is not complete change msc_cmd_block_wrapper_t flags field to dir force full speed for easy testing NOTEs: somehow unable to get endpoint IN interrupt with ioc
2013-10-29implementing sw device stackhathach
2013-10-24change TUSB_CFG_CONTROLLER0/1_MODE to TUSB_CFG_CONTROLLER_0/1_MODE for clearancehathach
adding configuration docs for tinyusb_config.h document HID mouse & keyboard API
2013-10-16refractor hub apihathach
fix all test build errors
2013-10-02clean up warnings here and therehathach
2013-10-01- move disconnection handle to enum task --> move tusbh_xxx_unmount is ↵hathach
invoked in non-isr context
2013-10-01refractor hubhathach
2013-09-30hack ehci advance async to handle disconnect via hubhathach
2013-09-30able to mount one device on the hubhathach
2013-09-27house keepinghathach
2013-09-24allow a limited model to deal with stalled pipe/transactionhathach
added stall clear & able to mount the stupid toshiba thumb drive add HCD pipe API - bool hcd_pipe_is_busy(pipe_handle_t pipe_hdl); - bool hcd_pipe_is_stalled(pipe_handle_t pipe_hdl); - uint8_t hcd_pipe_get_endpoint_addr(pipe_handle_t pipe_hdl); - tusb_error_t hcd_pipe_clear_stall(pipe_handle_t pipe_hdl); remove tusbh_device_mount_failed_cb (not neccessary for user)
2013-09-24add some tests support for msc hosthathach
refractor msch buffer for getting inital scsi like inquiry, read capacity adding support for resovling stall on control pipe
2013-09-23refractor hcd API to allow queue xfer without actually transferring datahathach
2013-09-22fix pingstate for highspeed bulk out transferhathach
temp implementation of msc host --> can issue inquiry command
2013-09-21house keeping, clean up warningshathach
2013-09-21house keepinghathach
2013-09-20start to add msc host, fix dangerous problem with unstable device when ↵hathach
plugged --> 200 ms delay. 50ms delay after each port reset
2013-09-19starting to add support for IAR workbenchhathach
2013-09-13integrate & able to run cmsis-rtx with current code basehathach
2013-07-06refractor qhd_xfer_error_isr (omit xfer_type para)hathach
add accumulated total xferred byte for an endpoint until transfer with IOC set - control xfer will have length of data phase in usbh_xfer_isr callback
2013-07-06refractor ehci.c adding qhd_get_xfer_typehathach
2013-07-05change usbh_control_xfer_subtask to use flat API instead of passing ↵hathach
tusb_control_request_t struct
2013-07-04no big deal, only rename tusb_std_request_t to tusb_control_request_thathach
2013-07-02update usbh_xfer_isr to take actual byte transferred and correct testshathach
2013-07-02add way to calculate the actual byte transferred with ehcihathach
add come callback for cdch add code for cdc serial demo
2013-07-02add tusbh_cdc_serial_is_mounted APIhathach
test for cdch close driver
2013-07-02extract qhd_xfer_error_isrhathach
add support for period list in xfer_error_isr pass period TUSB_EVENT_XFER_ERROR & TUSB_EVENT_XFER_STALLED tests
2013-07-02refractor extract list_nexthathach
add support for TUSB_EVENT_XFER_STALL add test for error/stall in periodic list
2013-07-01refractor codehathach
2013-07-01add cdc host driver close cdch_closehathach
refractor - add helper function in ehci qhd_next & qtd_next - extract function qhd_create_pipe_handle rename tusb_transfer_type_t to tusb_xfer_type_t add some handling for stall
2013-07-01change control xfer check in usbh_xfer_isrhathach
rename - async_list_process_isr to async_list_xfer_complete_isr - period_list_process_isr to period_list_xfer_complete_isr extract function void qhd_xfer_complete_isr(ehci_qhd_t * p_qhd, tusb_transfer_type_t xfer_type)
2013-07-01rename usbh_isr to usbh_xfer_isrhathach
generated by cgit v1.3.1 (git 2.54.0) at 2026-08-31 18:35:09 +0000