| Age | Commit message (Collapse) | Author | |
|---|---|---|---|
| 2014-03-04 | change lpc17xx cmsis file & ohci to be able to build with IAR | hathach | |
| 2014-02-28 | refractor remove tusbh_msc_is_failed | hathach | |
| increase usbh enum task from 150 to 200 due to stack overflow when mounting msc device added task for msc host freeRTOS with stack = 300 (still cannot execute copy command) | |||
| 2014-02-28 | EHCI: immediately reset port when device connected. This proves to help ↵ | hathach | |
| prevent duplication connection event (also with OHCI) increase delay after reset to 100 ms (NXP's EHCI does not work with 50ms) --> fix all duplication connection with OHCI & EHCI | |||
| 2014-02-20 | fix the duplicated plug connection status change with lpc17xx by using ↵ | hathach | |
| immediate reset on isr. However Khanh's G5 mouse is not enumerated !! remove TUSB_CFG_CONFIGURATION_MAX from config file fix some warning | |||
| 2014-02-20 | use hcd_pipe_is_busy instead of hcd_pipe_is_idle | hathach | |
| remove hcd_pipe_is_idle | |||
| 2014-02-19 | re-enable blocking waiting in ehci controller reset (otherwise it wont works) | hathach | |
| 2013-12-19 | remove immediately reset when device plug. | hathach | |
| check to make sure device is still plug after initial delay (200ms) before reset remove blocking waiting when reset in ehci.c | |||
| 2013-12-19 | fix plug & unplug issue by reseting port immediately instead of waiting for ↵ | hathach | |
| usbh enumeration task to do so | |||
| 2013-12-19 | refractor ohci.c | hathach | |
| 2013-12-19 | able to run ohci hid mouse demo | hathach | |
| - an old mouse cause double plug event - an old mouse failed to response the first get 8 byte device descriptor | |||
| 2013-12-18 | implement hcd_pipe_close, able to plug & unplug device from ohci lpc17xx | hathach | |
| 2013-12-18 | able to run MSC host demo on lpc17xx | hathach | |
| implement walk around for halted ED in OHCI | |||
| 2013-12-17 | add in hcd_pipe_open & hcd_pipe_xfer | hathach | |
| 2013-12-16 | implement ohci | hathach | |
| - hcd_port_reset - hcd_port_connect_status - hcd_port_speed_get - hcd_pipe_control_open - hcd_pipe_control_xfer - done_queue_isr for control xfer able to go through enumeration with MSC device | |||
| 2013-12-13 | able to get connect status change interrupt occured | hathach | |
| 2013-12-11 | add structure & define for ohci | hathach | |
| 2013-11-25 | change MCU to TUSB_CFG_MCU | hathach | |
| 2013-11-22 | clean up | hathach | |
| add some doxygen work finalize device disconnection & suspend - suspend & resume & remote wake up is not supported yet | |||
| 2013-11-15 | refractor usbd, first step to make get configuration as sub task | hathach | |
| 2013-11-15 | add usbd_task to handle event task eg setup received | hathach | |
| 2013-11-06 | refractor dcd_controller_reset & hcd_controller_reset to hal_controller_reset | hathach | |
| 2013-11-01 | implement msc device class | hathach | |
| usbd auto stall control for not supported return from class control request usbd implement xfer isr callback mechanism DCD - implement dcd multiple qtd support - dcd dcd_pipe_stall - implement dcd_pipe_queue_xfer - xfer_complete_isr - flush control endpoint if received new setup while previous transfer is not complete change msc_cmd_block_wrapper_t flags field to dir force full speed for easy testing NOTEs: somehow unable to get endpoint IN interrupt with ioc | |||
| 2013-10-29 | implementing sw device stack | hathach | |
| 2013-10-27 | static assert to check OSAL_QUEUE_DEF's queue_depth parameter < 256 | hathach | |
| enable HOST_HCD_XFER_INTERRUPT by default (previously only enabled with HID), as it is widely used implement tusbh_cdc_is_busy add compilation switch in usbh enumeration for hub rewrite CDC serial application to address usb-serial race condition | |||
| 2013-10-26 | more document | hathach | |
| 2013-10-25 | more doxygen work | hathach | |
| 2013-10-24 | document hub | hathach | |
| 2013-10-24 | change TUSB_CFG_CONTROLLER0/1_MODE to TUSB_CFG_CONTROLLER_0/1_MODE for clearance | hathach | |
| adding configuration docs for tinyusb_config.h document HID mouse & keyboard API | |||
| 2013-10-16 | refractor hub api | hathach | |
| fix all test build errors | |||
| 2013-10-02 | clean up warnings here and there | hathach | |
| 2013-10-02 | update freertos project | hathach | |
| temp hack to fix problem with no TD on status endpoint of hub in case of error | |||
| 2013-10-01 | - move disconnection handle to enum task --> move tusbh_xxx_unmount is ↵ | hathach | |
| invoked in non-isr context | |||
| 2013-10-01 | ignore multiple level of hub | hathach | |
| 2013-10-01 | handle unplug the hub itself | hathach | |
| 2013-10-01 | refractor hub | hathach | |
| 2013-10-01 | refractor hub | hathach | |
| 2013-09-30 | hack ehci advance async to handle disconnect via hub | hathach | |
| 2013-09-30 | refractor hub | hathach | |
| 2013-09-30 | refractor hub | hathach | |
| 2013-09-30 | refractor hub | hathach | |
| 2013-09-30 | refractor hub | hathach | |
| 2013-09-30 | refractor hub | hathach | |
| 2013-09-30 | able to mount one device on the hub | hathach | |
| 2013-09-28 | clean up hid host (temp let test failed) | hathach | |
| 2013-09-27 | house keeping | hathach | |
| 2013-09-24 | allow a limited model to deal with stalled pipe/transaction | hathach | |
| added stall clear & able to mount the stupid toshiba thumb drive add HCD pipe API - bool hcd_pipe_is_busy(pipe_handle_t pipe_hdl); - bool hcd_pipe_is_stalled(pipe_handle_t pipe_hdl); - uint8_t hcd_pipe_get_endpoint_addr(pipe_handle_t pipe_hdl); - tusb_error_t hcd_pipe_clear_stall(pipe_handle_t pipe_hdl); remove tusbh_device_mount_failed_cb (not neccessary for user) | |||
| 2013-09-24 | add some tests support for msc host | hathach | |
| refractor msch buffer for getting inital scsi like inquiry, read capacity adding support for resovling stall on control pipe | |||
| 2013-09-23 | refractor hcd API to allow queue xfer without actually transferring data | hathach | |
| 2013-09-22 | added read capacity 10 with hacking code | hathach | |
| 2013-09-22 | fix pingstate for highspeed bulk out transfer | hathach | |
| temp implementation of msc host --> can issue inquiry command | |||
