summaryrefslogtreecommitdiff
path: root/tinyusb/tusb_option.h
AgeCommit message (Collapse)Author
2013-11-11adding support for lpc13uxxhathach
2013-11-08add windows driver for cdchathach
add simple echo cdc serial demo add cdc device send/receive API refractor descriptor refractor cdc.h add usbd driver function - init - bus_reset
2013-11-01implement msc device classhathach
usbd auto stall control for not supported return from class control request usbd implement xfer isr callback mechanism DCD - implement dcd multiple qtd support - dcd dcd_pipe_stall - implement dcd_pipe_queue_xfer - xfer_complete_isr - flush control endpoint if received new setup while previous transfer is not complete change msc_cmd_block_wrapper_t flags field to dir force full speed for easy testing NOTEs: somehow unable to get endpoint IN interrupt with ioc
2013-10-29implementing sw device stackhathach
2013-10-27static assert to check OSAL_QUEUE_DEF's queue_depth parameter < 256hathach
enable HOST_HCD_XFER_INTERRUPT by default (previously only enabled with HID), as it is widely used implement tusbh_cdc_is_busy add compilation switch in usbh enumeration for hub rewrite CDC serial application to address usb-serial race condition
2013-10-24change TUSB_CFG_CONTROLLER0/1_MODE to TUSB_CFG_CONTROLLER_0/1_MODE for clearancehathach
adding configuration docs for tinyusb_config.h document HID mouse & keyboard API
2013-10-02clean up warnings here and therehathach
2013-09-21house keepinghathach
2013-07-03change some license texthathach
2013-07-01fix compilation errorhathach
2013-06-29test refractorhathach
2013-06-08ADDING LPC176X devicehathach
implementing dcd_lpc175x_6x.c add usbd_dcd.h add usbd_isr with TUSB_EVENT_SETUP_RECEIVED & TUSB_EVENT_BUS_RESET event parameterize TUSB_CFG_DEVICE_CONTROL_PACKET_SIZE (replace USB_MAX_PACKET0) --> able to get interrupt and receive setup packet, but SET ADDRESS (expected get device descriptor). uncomment write zero length will cause issue, no more interrupt ?
2013-06-04re-create ngx4330.hhathach
remove some rom driver dependency on upper layer introduce CAP_DEVICE_ROMDRIVER to overwrite TUSB_CFG_DEVICE_USE_ROM_DRIVER within the lib add support for lpc175x_6x - able to build and blink led on lpcxpresso1769 with device (without any class enabled)
2013-06-03add TUSB_CFG_PROUDCT_ID checkhathach
move USB_MAX_EP_NUM to device dependency - lpc43 --> 6 - lpc11/13 --> 5
2013-05-29fix lpcxpresso1347 board_ledshathach
temp change USBD_API to ROM_API add lpc13xx device support fix romdriver pointer able to init rom driver
2013-05-28rename NGX to ngxhathach
add a bunch of stub header for dcd (175x_6x, 13xx, 18xx_43xx) add dcd_nxp_romdriver for handling usb rom driver add BIT_TEST_ in binary.h remove mw_usbd_hid.h include due to lexical conflict
2013-05-23- move CMSIS & driver lib for lpc13u to codebase bsp/lpc13xxhathach
- change descriptor.c/h able to build device example
2013-05-06add stub for msc host & hub driverhathach
2013-04-25add TUSB_CFG_OS_TASK_PRIO to mandatory option for using an RTOShathach
using plain char for error enum character increase freeRTOS configMAX_PRIORITIES to 16 house keeping & clean up compiler warning
2013-04-08move MCU define to tusb_option.h, fix the ATTR with USB RAMhathach
hack: add delay before the very first xfer when enumerating (finalize later after reading USB 2.0 specs)
2013-03-25remove multiple instances per device for hidh keyboard (no needed)hathach
- API retain though
2013-03-25remove obsolete TUSB_CFG_HOST_HID_KEYBOARD_ENDPOINT_SIZEhathach
temporarily ignore test for hid_host.c due to ceedling linking issue with weak symbol implement hidh_open_subtask driver to subclass open rename hidh_keyboard_install to hidh_keyboard_open_subtask
2013-03-25change website from tinyusb.net to tinyusb.orghathach
2013-03-13forget to add test file for ehci isrhathach
2013-03-04refractorhathach
- remove TUSB_CFG_HOST_CONTROLLER_START_INDEX
2013-03-04replace TUSB_CFG_HOST by MODE_HOST_SUPPORTEDhathach
move stuffs around
2013-03-04allow configure host/device by controller basichathach
- make changes to adapt add mcu_capacity.h
2013-03-01rename ehci usb_int usb_sts usb/error fieldhathach
move MCU define to tusb_option.h
2013-02-27house keepinghathach
- correct initialization call sequence - move hcd_init to ehci.c
2013-02-08updating usbh init with class inithathach
2013-02-08add TUSB_CFG_HOST_CONTROLLER_START_INDEXhathach
update usbh_init and test code for TUSB_CFG_HOST_CONTROLLER_START_INDEX clean up some
2013-02-04add TUSB_CFG_HOST_ENUM_BUFFER_SIZEhathach
add enum buffer getting serious with osal_freeRTOS
2013-02-01change osal_timeout_t to uint32_thathach
implement osal_tick_get & osal_tick_tock for osal_none implement timeout for osal_semaphore_wait
2013-02-01add std=gnu99 for test buildhathach
add hcd_init to usbh_init and update test code add TUSB_CFG_OS_TICK_PER_SECOND define for TUSB_OS_NONE change osal_semaphore_wait and osal_queue_receive API to have timeout effectively
2013-01-31add version macroshathach
2013-01-27update license year from 2012 to 2013hathach
2013-01-26add more test code for keyboard hid application APIhathach
refractor, restructure, rename several thing regarding host, keyboard etc ...
2013-01-22start to supporthathach
- usbd host - osal some global define #define TUSB_CFG_HOST_CONTROLLER_NUM #define TUSB_CFG_HOST_DEVICE_MAX #define TUSB_CFG_CONFIGURATION_MAX rename & refractor HID type structure & enum use CException to test asssertion library add test for hid_host_keyboard with usbd configure get & osal queue get stubs update test for assertion library refractor ASSERT_STATUS in assertion library update tusb_error_t values rename usb basic type & enum in tusb_types.h and std_descriptors.h
2013-01-18prepare test project for 43xx host testhathach
2013-01-18add DEVICE_ROM_DRIVER_ADDR macro in hal to point to rom driver addhathach
add TUSB_ATTR_RAM_SECTION in tinyusb_config.h to abtract usb ram placement to application remove power_api.h (mcu dependency)
2013-01-13rename ASSERT_ERROR to ASSERT_STATUShathach
add binary const support @ common/binary.h enhance assert support @ common/assertion.h add test code for assertion.h
2013-01-11add external configure file: tusb_config.hhathach
rename the internal/default configure from tusb_cfg.h to tusb_option.h
generated by cgit v1.3.1 (git 2.54.0) at 2026-09-02 22:22:22 +0000