tinyusb.git - Unnamed repository; edit this file 'description' to name the repository.

Age	Commit message (Collapse)	Author
2013-12-01	correct stall & clear stall behavior for non-control pipe	hathach
	fix data_residue when read10, write10 return 0 (no need for BE conversion)
2013-12-01	change class_ixr to class_cb	hathach
	use IAD whenever enable CDC to make sure windows driver can detect change keyboard, mouse send report to int_on_complete = true
2013-12-01	add some document for msc_device API	hathach

2013-12-01	tested with lpc13u	hathach

2013-11-30	code clean up	hathach

2013-11-30	completely change the dcd for lpc11u & lpc13u to overcome the fact that ↵	hathach
	lpc11u dma cannot transfer more than 64 bytes each buffer. This implement an soft DMA for lpc11u & lpc13u (previously 1023 max) queued transfer
2013-11-26	house keeping	hathach

2013-11-26	complete msc demo with lpc13uxx with readonly flash	hathach

2013-11-26	change endian conversion to native to be & be to native	hathach
	completely deferred xfer isr event to usbd task complete read10, write10 sequence for large data transfer
2013-11-25	refractor usbd task	hathach
	move control request data into task event adding tusbd_msc_read10_cb, tusbd_msc_write10_cb (not fully supported)
2013-11-25	change MCU to TUSB_CFG_MCU	hathach

2013-11-22	temp fix for dcd 43xx suspend detection (disconnection does not generate ↵	hathach
	interrupt)
2013-11-22	clean up	hathach
	add some doxygen work finalize device disconnection & suspend - suspend & resume & remote wake up is not supported yet
2013-11-21	fixed lpc11u/13u VBUS (P0_3) with pulldown resistor for USB_VBUS_DEBOUNCED ↵	hathach
	is correct added disconnect callback for lpc11u/13u
2013-11-21	add class mounted callback for hid mouse/keyboard & refractor mouse/keyboard app	hathach

2013-11-21	clean up	hathach

2013-11-21	refractor usbd-dcd callback, add bus event isr	hathach

2013-11-20	fixed dcd lpc17xx queue transfer & IOC handling	hathach
	able to run MSC demo
2013-11-20	refractor descriptor	hathach

2013-11-20	house keeping	hathach

2013-11-20	add sw int_on_complete support for dcd lpc17xx	hathach

2013-11-19	complete dcd for lpc175x_6x	hathach
	cdc device demo can work but there is hardfault with dma descriptor with fast typing
2013-11-18	get lpc17xx running through enumeration (with control data < 64)	hathach

2013-11-16	fix dcd_pipe_control_xfer for dcd43xx	hathach
	refractor tusb_descriptors.h
2013-11-15	IAD support	hathach

2013-11-15	add semaphore for control xfer for > 64 support for some mcu such as ↵	hathach
	lpc11u/lpc17xx
2013-11-15	refractor usbd's get descriptor	hathach

2013-11-15	separate data & status from dcd_pipe_control_xfer	hathach

2013-11-15	refractor usbd, first step to make get configuration as sub task	hathach

2013-11-15	add usbd_task to handle event task eg setup received	hathach

2013-11-15	fix build error with device 43xx	hathach
	refractor mscd ramdisk demo
2013-11-14	complete double buffering for queueing xfer for lpc11u/13u requried by msc ↵	hathach
	device
2013-11-13	fix potential issue with stall endpoints	hathach
	NOTE: cannot able to STALL control OUT endpoints --> unsupported with data out request may got to an issue. clean up configure, add max string descriptor configure as windows sometimes ask for string @ index 238 !!!
2013-11-13	able to build and run cdc device demo on lpc11uxx	hathach

2013-11-11	technically, mouse + keyboard device demo also work on lpc13uxx	hathach

2013-11-11	remove xfer_type in endpoint_handle_t	hathach
	cdc device demo runs on lpc13uxx
2013-11-11	adding support for lpc13uxx	hathach

2013-11-08	add tusbd_cdc_is_busy	hathach
	enhance cdc serial device demo refractor fifo.c
2013-11-08	add windows driver for cdc	hathach
	add simple echo cdc serial demo add cdc device send/receive API refractor descriptor refractor cdc.h add usbd driver function - init - bus_reset
2013-11-07	clean up tusb_descriptors	hathach

2013-11-06	added hid device hidd_isr callback	hathach
	refractor keyboard dev demo app
2013-11-06	fix a bug with USB1, but still cannot get interrupt occurred on USB1	hathach

2013-11-06	refractor for device able to work on usb1 of lpc43xx. But could not get it ↵	hathach
	work on EA4357
2013-11-06	refractor dcd_controller_reset & hcd_controller_reset to hal_controller_reset	hathach

2013-11-05	msc add support	hathach
	- SCSI_CMD_MODE_SELECT_6 - SCSI_CMD_MODE_SENSE_6 - SCSI_CMD_PREVENT_ALLOW_MEDIUM_REMOVAL fix msc device bug with no data unsupported command complete msc device demo with ram disk of 8KB
2013-11-01	added support for	hathach
	- sense data scsi_sense_fixed_data_t - read format capacity scsi_read_format_capacity_data_t change msc device callback to support actual response fix dcd_pipe_clear_stall also reset toggle
2013-11-01	add dcd pipe clear stall	hathach
	- tusb_error_t dcd_pipe_clear_stall(uint8_t coreid, uint8_t edpt_addr) but does not take endpoint_handle_t as input complete msc device driver add usbd clear stall endpoint
2013-11-01	implement msc device class	hathach
	usbd auto stall control for not supported return from class control request usbd implement xfer isr callback mechanism DCD - implement dcd multiple qtd support - dcd dcd_pipe_stall - implement dcd_pipe_queue_xfer - xfer_complete_isr - flush control endpoint if received new setup while previous transfer is not complete change msc_cmd_block_wrapper_t flags field to dir force full speed for easy testing NOTEs: somehow unable to get endpoint IN interrupt with ioc
2013-10-30	clean up	hathach

2013-10-30	refractor hid device	hathach
	add check dcd_pipe_open if endpoint is already used refractor usbd : parse and auto open class driver