tinyusb.git - Unnamed repository; edit this file 'description' to name the repository.

Age	Commit message (Collapse)	Author
2014-03-12	fix IAR alignment OHCI hcca will occupies the whole 256 (instead of just 252 ↵	hathach
	like the specs)
2014-03-12	change dcd 176x alignment placement to work with IAR	hathach

2014-03-12	clean up IAR ending warning	hathach

2014-03-12	able to build lpc11u with IAR	hathach
	clean ending warming with IAR
2014-03-12	a fix to IAR's incapability to force struct's member on specified alignment	hathach

2014-03-12	IAR line ending warning	hathach

2014-03-12	fix iar warning	hathach

2014-03-12	added scatter file for lpc11u & lpc13u for it to run with keil	hathach

2014-03-10	try to port lpc11uxx device demo with IAR	hathach

2014-03-10	cannot get IAR work with lpc1769 device demo	hathach

2014-03-10	change desc_str_table to array of pointer of uint8_t* to be compatible with ↵	hathach
	IAR (lack of support for VLA initialization) IAR device os none works with ea4357
2014-03-10	change IAR TUSB_CFG_ATTR_USBRAM to _Pragma("location=\".ahb_sram1\"") ↵	hathach
	instead of @ .ahb_sram1 so that we can place it before the variable for a cleaner code change pipe xfer API buffer from void* to uint8_t* change FIFO_DEF to have a separated buffer to be compatible with IAR\ refractor IAR data alignment pragma
2014-03-10	clean up dcd_lpc175x_6x.c	hathach

2014-03-10	refractor dcd_lpc175x_6x	hathach
	- remove dd allocation table and use fixed 2 dd for each endpoints - change dd::used to dd::int_on_complete --> fixed all the bugs with lpc175x_6x with MSC device & CDC device
2014-03-09	rename tusbd_msc_scsi_received_isr to tusbd_msc_scsi_cb	hathach
	fix the status phase true --> false ASSERT_STATUS( dcd_pipe_xfer( p_msc->edpt_in , p_csw, sizeof(msc_cmd_status_wrapper_t), false) ); board ea4357 added P9_5 pull down for device connect
2014-03-06	refractor app_os_prio.h	hathach

2014-03-05	IAR host os none work well with ea4357	hathach

2014-03-04	added support for IAR retarget but not yet succeeded. lpc17xx have problem ↵	hathach
	connect with jlink
2014-03-04	change lpc17xx cmsis file & ohci to be able to build with IAR	hathach

2014-02-28	refractor remove tusbh_msc_is_failed	hathach
	increase usbh enum task from 150 to 200 due to stack overflow when mounting msc device added task for msc host freeRTOS with stack = 300 (still cannot execute copy command)
2014-02-28	EHCI: immediately reset port when device connected. This proves to help ↵	hathach
	prevent duplication connection event (also with OHCI) increase delay after reset to 100 ms (NXP's EHCI does not work with 50ms) --> fix all duplication connection with OHCI & EHCI
2014-02-28	merge common define in osal/osal_cmsis_rtx.h & osal/osal_freeRTOS.h	hathach

2014-02-20	fix the duplicated plug connection status change with lpc17xx by using ↵	hathach
	immediate reset on isr. However Khanh's G5 mouse is not enumerated !! remove TUSB_CFG_CONFIGURATION_MAX from config file fix some warning
2014-02-20	use hcd_pipe_is_busy instead of hcd_pipe_is_idle	hathach
	remove hcd_pipe_is_idle
2014-02-19	re-enable blocking waiting in ehci controller reset (otherwise it wont works)	hathach

2014-02-19	some code clean up	hathach
	NOTE: host on ea4357 does not work anymore
2014-01-24	clean up warnings	hathach

2014-01-24	refractor __n2be_16	hathach

2013-12-27	add device_os_none keil project for all boards	hathach

2013-12-19	remove immediately reset when device plug.	hathach
	check to make sure device is still plug after initial delay (200ms) before reset remove blocking waiting when reset in ehci.c
2013-12-19	fix plug & unplug issue by reseting port immediately instead of waiting for ↵	hathach
	usbh enumeration task to do so
2013-12-19	refractor ohci.c	hathach

2013-12-19	able to run ohci hid mouse demo	hathach
	- an old mouse cause double plug event - an old mouse failed to response the first get 8 byte device descriptor
2013-12-18	implement hcd_pipe_close, able to plug & unplug device from ohci lpc17xx	hathach

2013-12-18	able to run MSC host demo on lpc17xx	hathach
	implement walk around for halted ED in OHCI
2013-12-17	add in hcd_pipe_open & hcd_pipe_xfer	hathach

2013-12-16	implement ohci	hathach
	- hcd_port_reset - hcd_port_connect_status - hcd_port_speed_get - hcd_pipe_control_open - hcd_pipe_control_xfer - done_queue_isr for control xfer able to go through enumeration with MSC device
2013-12-13	using PINSEL_ConfigPin for setting pinsel	hathach

2013-12-13	able to get connect status change interrupt occured	hathach

2013-12-12	implement inline bit manipulation function	hathach

2013-12-11	add structure & define for ohci	hathach

2013-12-11	fix error in dcd_lpc175x_6x (still has problem with control transfer)	hathach
	fix build error for host start to add keil support for device opt out pca9532.c when ea4357 is not the selected board
2013-12-10	add some doxygen	hathach

2013-12-09	complete dcd 17xx control xfer with soft DMA	hathach
	keyboard LED set report run ok with lpc17xx there is problem with cdc set line encoding
2013-12-09	house keeping, lpc43xx works okie	hathach

2013-12-09	refractor dcd lpc43xx control xfer (with int on complete)	hathach

2013-12-09	minor refractor	hathach

2013-12-09	add keyboard led mask	hathach
	make usbd control request to subtask add get/set report via control pipe to hidd enforce soft DMA to control pipe for lpc11u (lpc17xx not yet) temp add led_blinking_set_interval to change led blinking interval refractor dcd_pipe_control_xfer to have interrupt on complete option add get/set report support of moused_app and keyboardd_app, keyboard LED will make LED blink faster
2013-12-02	refractor hid device driver	hathach

2013-12-02	add board lpclink2, able to run device stack without any problems	hathach