From 64f86ef8e744e72e27b529ddb3440420ee4e3cf0 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 24 Jan 2024 11:32:28 +0700 Subject: build workflow with hil-test when test/hil changes --- .github/workflows/build_esp.yml | 2 ++ .github/workflows/build_iar.yml | 2 ++ .github/workflows/cmake_arm.yml | 2 ++ 3 files changed, 6 insertions(+) (limited to '.github/workflows') diff --git a/.github/workflows/build_esp.yml b/.github/workflows/build_esp.yml index 33caa0edb..65ade7b03 100644 --- a/.github/workflows/build_esp.yml +++ b/.github/workflows/build_esp.yml @@ -8,6 +8,7 @@ on: - 'examples/**' - 'lib/**' - 'hw/**' + - 'test/hil/**' - '.github/workflows/build_esp.yml' pull_request: branches: [ master ] @@ -16,6 +17,7 @@ on: - 'examples/**' - 'lib/**' - 'hw/**' + - 'test/hil/**' - '.github/workflows/build_esp.yml' concurrency: diff --git a/.github/workflows/build_iar.yml b/.github/workflows/build_iar.yml index 9f2cc0351..a0a022ecc 100644 --- a/.github/workflows/build_iar.yml +++ b/.github/workflows/build_iar.yml @@ -9,6 +9,7 @@ on: - 'lib/**' - 'hw/**' - 'tools/get_deps.py' + - 'test/hil/**' - '.github/workflows/build_iar.yml' pull_request: branches: [ master ] @@ -18,6 +19,7 @@ on: - 'lib/**' - 'hw/**' - 'tools/get_deps.py' + - 'test/hil/**' - '.github/workflows/build_iar.yml' concurrency: diff --git a/.github/workflows/cmake_arm.yml b/.github/workflows/cmake_arm.yml index 8b87fef21..4ef2de4a6 100644 --- a/.github/workflows/cmake_arm.yml +++ b/.github/workflows/cmake_arm.yml @@ -8,6 +8,7 @@ on: - 'examples/**' - 'lib/**' - 'hw/**' + - 'test/hil/**' - 'tools/get_deps.py' - '.github/workflows/cmake_arm.yml' pull_request: @@ -17,6 +18,7 @@ on: - 'examples/**' - 'lib/**' - 'hw/**' + - 'test/hil/**' - 'tools/get_deps.py' - '.github/workflows/cmake_arm.yml' -- cgit v1.3.1 From 14d44171b59fc273adcccc1464da6e6cfb2c1864 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 25 Jan 2024 19:13:11 +0700 Subject: bump up to actions/setup-python@v5 --- .github/workflows/build_aarch64.yml | 2 +- .github/workflows/build_arm.yml | 2 +- .github/workflows/build_esp.yml | 2 +- .github/workflows/build_msp430.yml | 2 +- .github/workflows/build_renesas.yml | 2 +- .github/workflows/build_riscv.yml | 2 +- .github/workflows/build_win_mac.yml | 2 +- .github/workflows/cmake_arm.yml | 2 +- .github/workflows/pre-commit.yml | 2 +- 9 files changed, 9 insertions(+), 9 deletions(-) (limited to '.github/workflows') diff --git a/.github/workflows/build_aarch64.yml b/.github/workflows/build_aarch64.yml index 40fc8d63a..e5dbf9494 100644 --- a/.github/workflows/build_aarch64.yml +++ b/.github/workflows/build_aarch64.yml @@ -36,7 +36,7 @@ jobs: - 'broadcom_64bit' steps: - name: Setup Python - uses: actions/setup-python@v4 + uses: actions/setup-python@v5 with: python-version: '3.x' diff --git a/.github/workflows/build_arm.yml b/.github/workflows/build_arm.yml index 4127db5bf..9f3270c91 100644 --- a/.github/workflows/build_arm.yml +++ b/.github/workflows/build_arm.yml @@ -46,7 +46,7 @@ jobs: - 'tm4c123 xmc4000' steps: - name: Setup Python - uses: actions/setup-python@v4 + uses: actions/setup-python@v5 with: python-version: '3.x' diff --git a/.github/workflows/build_esp.yml b/.github/workflows/build_esp.yml index 65ade7b03..315df255e 100644 --- a/.github/workflows/build_esp.yml +++ b/.github/workflows/build_esp.yml @@ -37,7 +37,7 @@ jobs: - 'espressif_s3_devkitc' steps: - name: Setup Python - uses: actions/setup-python@v4 + uses: actions/setup-python@v5 with: python-version: '3.x' diff --git a/.github/workflows/build_msp430.yml b/.github/workflows/build_msp430.yml index 296dbb766..f913df913 100644 --- a/.github/workflows/build_msp430.yml +++ b/.github/workflows/build_msp430.yml @@ -36,7 +36,7 @@ jobs: steps: - name: Setup Python - uses: actions/setup-python@v4 + uses: actions/setup-python@v5 with: python-version: '3.x' diff --git a/.github/workflows/build_renesas.yml b/.github/workflows/build_renesas.yml index 017a29eee..ec06c9426 100644 --- a/.github/workflows/build_renesas.yml +++ b/.github/workflows/build_renesas.yml @@ -35,7 +35,7 @@ jobs: - 'rx' steps: - name: Setup Python - uses: actions/setup-python@v4 + uses: actions/setup-python@v5 with: python-version: '3.x' diff --git a/.github/workflows/build_riscv.yml b/.github/workflows/build_riscv.yml index e030bb77f..e891a3a51 100644 --- a/.github/workflows/build_riscv.yml +++ b/.github/workflows/build_riscv.yml @@ -37,7 +37,7 @@ jobs: - 'gd32vf103' steps: - name: Setup Python - uses: actions/setup-python@v4 + uses: actions/setup-python@v5 with: python-version: '3.x' diff --git a/.github/workflows/build_win_mac.yml b/.github/workflows/build_win_mac.yml index 7fa1a6943..b33b5b593 100644 --- a/.github/workflows/build_win_mac.yml +++ b/.github/workflows/build_win_mac.yml @@ -35,7 +35,7 @@ jobs: steps: - name: Setup Python - uses: actions/setup-python@v4 + uses: actions/setup-python@v5 with: python-version: '3.x' diff --git a/.github/workflows/cmake_arm.yml b/.github/workflows/cmake_arm.yml index 4ef2de4a6..f97645ad1 100644 --- a/.github/workflows/cmake_arm.yml +++ b/.github/workflows/cmake_arm.yml @@ -59,7 +59,7 @@ jobs: - 'stm32u5' steps: - name: Setup Python - uses: actions/setup-python@v4 + uses: actions/setup-python@v5 with: python-version: '3.x' diff --git a/.github/workflows/pre-commit.yml b/.github/workflows/pre-commit.yml index 2e9ae9264..e36259daa 100644 --- a/.github/workflows/pre-commit.yml +++ b/.github/workflows/pre-commit.yml @@ -15,7 +15,7 @@ jobs: runs-on: ubuntu-latest steps: - name: Setup Python - uses: actions/setup-python@v4 + uses: actions/setup-python@v5 with: python-version: '3.x' -- cgit v1.3.1 From d1f77e08ac582194578d9587a47201b7d29e0b29 Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 2 Feb 2024 13:08:42 +0700 Subject: build esp32 ci with v5.1 --- .github/workflows/build_esp.yml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to '.github/workflows') diff --git a/.github/workflows/build_esp.yml b/.github/workflows/build_esp.yml index 315df255e..8fbdb31ff 100644 --- a/.github/workflows/build_esp.yml +++ b/.github/workflows/build_esp.yml @@ -48,7 +48,7 @@ jobs: uses: actions/checkout@v4 - name: Build - run: docker run --rm -v $PWD:/project -w /project espressif/idf:latest python3 tools/build_esp32.py ${{ matrix.board }} + run: docker run --rm -v $PWD:/project -w /project espressif/idf:v5.1.1 python3 tools/build_esp32.py ${{ matrix.board }} - name: Upload Artifacts for Hardware Testing if: matrix.board == 'espressif_s3_devkitc' && github.repository_owner == 'hathach' -- cgit v1.3.1 From 3d3bf45102ded992fc10be09f3e9b9c981379ad1 Mon Sep 17 00:00:00 2001 From: hathach Date: Sat, 24 Feb 2024 00:36:07 +0700 Subject: frdm k64f usb work well, add kinetis_k to ci cmake --- .github/workflows/cmake_arm.yml | 2 +- hw/bsp/kinetis_k/boards/frdm_k64f/frdm_k64f.mex | 43 +++++++++++++++++++++++-- hw/bsp/kinetis_k/family.c | 4 ++- hw/bsp/kinetis_k/family.cmake | 1 + hw/bsp/kinetis_k/family.mk | 1 + src/portable/chipidea/ci_fs/ci_fs_kinetis.h | 6 ++-- src/portable/chipidea/ci_fs/dcd_ci_fs.c | 8 +++++ src/portable/nxp/khci/dcd_khci.c | 14 +++----- 8 files changed, 60 insertions(+), 19 deletions(-) (limited to '.github/workflows') diff --git a/.github/workflows/cmake_arm.yml b/.github/workflows/cmake_arm.yml index f97645ad1..80ab1ea71 100644 --- a/.github/workflows/cmake_arm.yml +++ b/.github/workflows/cmake_arm.yml @@ -38,7 +38,7 @@ jobs: family: # Alphabetical order - 'imxrt' - - 'kinetis_kl' + - 'kinetis_k kinetis_kl' - 'lpc17 lpc18 lpc40 lpc43' - 'lpc54 lpc55' - 'mcx' diff --git a/hw/bsp/kinetis_k/boards/frdm_k64f/frdm_k64f.mex b/hw/bsp/kinetis_k/boards/frdm_k64f/frdm_k64f.mex index 28d1ea612..4a8c77f95 100644 --- a/hw/bsp/kinetis_k/boards/frdm_k64f/frdm_k64f.mex +++ b/hw/bsp/kinetis_k/boards/frdm_k64f/frdm_k64f.mex @@ -732,15 +732,27 @@ - + - true + true + + + + + 2.8.0 + + + + + + + 14.0.0 @@ -755,6 +767,31 @@ true + + + true + + + + + true + + + + + 0 + + + + + true + + + + + true + + @@ -789,7 +826,7 @@ - + diff --git a/hw/bsp/kinetis_k/family.c b/hw/bsp/kinetis_k/family.c index 38cfc45e3..6df29c1fc 100644 --- a/hw/bsp/kinetis_k/family.c +++ b/hw/bsp/kinetis_k/family.c @@ -30,6 +30,7 @@ #include "fsl_port.h" #include "fsl_clock.h" #include "fsl_uart.h" +#include "fsl_sysmpu.h" #include "board/clock_config.h" #include "board/pin_mux.h" @@ -50,6 +51,7 @@ void board_init(void) { BOARD_InitBootPins(); BOARD_BootClockRUN(); SystemCoreClockUpdate(); + SYSMPU_Enable(SYSMPU, 0); #if CFG_TUSB_OS == OPT_OS_NONE // 1ms tick timer @@ -84,7 +86,7 @@ void board_init(void) { #endif // USB - CLOCK_EnableUsbfs0Clock(kCLOCK_UsbSrcPll0, CLOCK_GetFreq(kCLOCK_PllFllSelClk)); + // USB clock is configured in BOARD_BootClockRUN() } //--------------------------------------------------------------------+ diff --git a/hw/bsp/kinetis_k/family.cmake b/hw/bsp/kinetis_k/family.cmake index 6d642c101..e0b5fcfc8 100644 --- a/hw/bsp/kinetis_k/family.cmake +++ b/hw/bsp/kinetis_k/family.cmake @@ -40,6 +40,7 @@ function(add_board_target BOARD_TARGET) ${SDK_DIR}/drivers/gpio ${SDK_DIR}/drivers/port ${SDK_DIR}/drivers/smc + ${SDK_DIR}/drivers/sysmpu ${SDK_DIR}/drivers/uart ) diff --git a/hw/bsp/kinetis_k/family.mk b/hw/bsp/kinetis_k/family.mk index de352a6a9..995873eec 100644 --- a/hw/bsp/kinetis_k/family.mk +++ b/hw/bsp/kinetis_k/family.mk @@ -29,6 +29,7 @@ INC += \ $(TOP)/$(SDK_DIR)/drivers/gpio \ $(TOP)/$(SDK_DIR)/drivers/port \ $(TOP)/$(SDK_DIR)/drivers/smc \ + $(TOP)/$(SDK_DIR)/drivers/sysmpu \ $(TOP)/$(SDK_DIR)/drivers/uart \ SRC_S += ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/startup_${MCU_VARIANT}.S diff --git a/src/portable/chipidea/ci_fs/ci_fs_kinetis.h b/src/portable/chipidea/ci_fs/ci_fs_kinetis.h index cd21af1c7..31e14a546 100644 --- a/src/portable/chipidea/ci_fs/ci_fs_kinetis.h +++ b/src/portable/chipidea/ci_fs/ci_fs_kinetis.h @@ -36,14 +36,12 @@ #define CI_FS_REG(_port) ((ci_fs_regs_t*) USB0_BASE) #define CI_REG CI_FS_REG(0) -void dcd_int_enable(uint8_t rhport) -{ +void dcd_int_enable(uint8_t rhport) { (void) rhport; NVIC_EnableIRQ(USB0_IRQn); } -void dcd_int_disable(uint8_t rhport) -{ +void dcd_int_disable(uint8_t rhport) { (void) rhport; NVIC_DisableIRQ(USB0_IRQn); } diff --git a/src/portable/chipidea/ci_fs/dcd_ci_fs.c b/src/portable/chipidea/ci_fs/dcd_ci_fs.c index 9327e09d8..4b1d488b5 100644 --- a/src/portable/chipidea/ci_fs/dcd_ci_fs.c +++ b/src/portable/chipidea/ci_fs/dcd_ci_fs.c @@ -271,9 +271,17 @@ void dcd_init(uint8_t rhport) { (void) rhport; + // save crystal-less setting (recovery clock) + uint32_t clk_recover_irc_en = CI_REG->CLK_RECOVER_IRC_EN; + uint32_t clk_recover_ctrl = CI_REG->CLK_RECOVER_CTRL;; + CI_REG->USBTRC0 |= USB_USBTRC0_USBRESET_MASK; while (CI_REG->USBTRC0 & USB_USBTRC0_USBRESET_MASK); + // restore crystal-less setting + CI_REG->CLK_RECOVER_IRC_EN = clk_recover_irc_en; + CI_REG->CLK_RECOVER_CTRL |= clk_recover_ctrl; + tu_memclr(&_dcd, sizeof(_dcd)); CI_REG->USBTRC0 |= TU_BIT(6); /* software must set this bit to 1 */ CI_REG->BDT_PAGE1 = (uint8_t)((uintptr_t)_dcd.bdt >> 8); diff --git a/src/portable/nxp/khci/dcd_khci.c b/src/portable/nxp/khci/dcd_khci.c index 5a2f768b3..5d04a524a 100644 --- a/src/portable/nxp/khci/dcd_khci.c +++ b/src/portable/nxp/khci/dcd_khci.c @@ -269,22 +269,16 @@ void dcd_init(uint8_t rhport) { (void) rhport; -#if (CFG_TUSB_MCU == OPT_MCU_KINETIS_K) - uint32_t clk_recover_irc_en; - uint32_t clk_recover_ctrl; - - clk_recover_irc_en = KHCI->CLK_RECOVER_IRC_EN; - clk_recover_ctrl = KHCI->CLK_RECOVER_CTRL; + // save crystal-less setting (recovery clock) + uint32_t clk_recover_irc_en = KHCI->CLK_RECOVER_IRC_EN; + uint32_t clk_recover_ctrl = KHCI->CLK_RECOVER_CTRL; KHCI->USBTRC0 |= USB_USBTRC0_USBRESET_MASK; while (KHCI->USBTRC0 & USB_USBTRC0_USBRESET_MASK); + // restore crystal-less setting KHCI->CLK_RECOVER_IRC_EN = clk_recover_irc_en; KHCI->CLK_RECOVER_CTRL |= clk_recover_ctrl; -#else - KHCI->USBTRC0 |= USB_USBTRC0_USBRESET_MASK; - while (KHCI->USBTRC0 & USB_USBTRC0_USBRESET_MASK); -#endif tu_memclr(&_dcd, sizeof(_dcd)); KHCI->USBTRC0 |= TU_BIT(6); /* software must set this bit to 1 */ -- cgit v1.3.1 From 54e35dd3cf0db737afcb3af2237a3bed85cab1e6 Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 22 Mar 2024 18:52:52 +0700 Subject: bump up upload artifact to v4 --- .github/workflows/build_esp.yml | 2 +- .github/workflows/cifuzz.yml | 2 +- .github/workflows/cmake_arm.yml | 6 +++--- .github/workflows/codeql.yml | 2 +- 4 files changed, 6 insertions(+), 6 deletions(-) (limited to '.github/workflows') diff --git a/.github/workflows/build_esp.yml b/.github/workflows/build_esp.yml index 8fbdb31ff..6106592de 100644 --- a/.github/workflows/build_esp.yml +++ b/.github/workflows/build_esp.yml @@ -52,7 +52,7 @@ jobs: - name: Upload Artifacts for Hardware Testing if: matrix.board == 'espressif_s3_devkitc' && github.repository_owner == 'hathach' - uses: actions/upload-artifact@v3 + uses: actions/upload-artifact@v4 with: name: ${{ matrix.board }} path: | diff --git a/.github/workflows/cifuzz.yml b/.github/workflows/cifuzz.yml index 4c4b12a6b..5dc0f2764 100644 --- a/.github/workflows/cifuzz.yml +++ b/.github/workflows/cifuzz.yml @@ -27,7 +27,7 @@ jobs: language: c++ fuzz-seconds: 600 - name: Upload Crash - uses: actions/upload-artifact@v3 + uses: actions/upload-artifact@v4 if: failure() && steps.build.outcome == 'success' with: name: artifacts diff --git a/.github/workflows/cmake_arm.yml b/.github/workflows/cmake_arm.yml index 80ab1ea71..1edd2e121 100644 --- a/.github/workflows/cmake_arm.yml +++ b/.github/workflows/cmake_arm.yml @@ -93,7 +93,7 @@ jobs: - name: Upload Artifacts for Hardware Testing (rp2040) if: matrix.family == 'rp2040' && github.repository_owner == 'hathach' - uses: actions/upload-artifact@v3 + uses: actions/upload-artifact@v4 with: name: raspberry_pi_pico path: | @@ -101,7 +101,7 @@ jobs: - name: Upload Artifacts for Hardware Testing (nRF) if: matrix.family == 'nrf' && github.repository_owner == 'hathach' - uses: actions/upload-artifact@v3 + uses: actions/upload-artifact@v4 with: name: feather_nrf52840_express path: | @@ -109,7 +109,7 @@ jobs: - name: Upload Artifacts for Hardware Testing (samd51) if: matrix.family == 'samd51' && github.repository_owner == 'hathach' - uses: actions/upload-artifact@v3 + uses: actions/upload-artifact@v4 with: name: itsybitsy_m4 path: | diff --git a/.github/workflows/codeql.yml b/.github/workflows/codeql.yml index 3d51fc5b7..1f7b60b9c 100644 --- a/.github/workflows/codeql.yml +++ b/.github/workflows/codeql.yml @@ -130,7 +130,7 @@ jobs: category: "/language:${{matrix.language}}" - name: Archive CodeQL results - uses: actions/upload-artifact@v3 + uses: actions/upload-artifact@v4 with: name: codeql-results path: ${{ steps.step1.outputs.sarif-output }} -- cgit v1.3.1 From ad5c449f1e37a92b093263680ee772e448100d9c Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 22 Mar 2024 20:12:25 +0700 Subject: bump up download artifacts to v4 --- .github/workflows/build_esp.yml | 2 +- .github/workflows/cmake_arm.yml | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to '.github/workflows') diff --git a/.github/workflows/build_esp.yml b/.github/workflows/build_esp.yml index 6106592de..07cbf3552 100644 --- a/.github/workflows/build_esp.yml +++ b/.github/workflows/build_esp.yml @@ -98,7 +98,7 @@ jobs: sparse-checkout: test/hil - name: Download Artifacts - uses: actions/download-artifact@v3 + uses: actions/download-artifact@v4 with: name: ${{ matrix.board }} path: cmake-build/cmake-build-${{ matrix.board }} diff --git a/.github/workflows/cmake_arm.yml b/.github/workflows/cmake_arm.yml index 1edd2e121..732e9b9df 100644 --- a/.github/workflows/cmake_arm.yml +++ b/.github/workflows/cmake_arm.yml @@ -153,7 +153,7 @@ jobs: sparse-checkout: test/hil - name: Download Artifacts - uses: actions/download-artifact@v3 + uses: actions/download-artifact@v4 with: name: ${{ matrix.board }} path: cmake-build/cmake-build-${{ matrix.board }} -- cgit v1.3.1 From a555266174acd639b0734fe2c3c65296450c4182 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 25 Mar 2024 13:54:35 +0700 Subject: add new labeler workflow --- .github/workflows/labeler.yml | 63 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 63 insertions(+) create mode 100644 .github/workflows/labeler.yml (limited to '.github/workflows') diff --git a/.github/workflows/labeler.yml b/.github/workflows/labeler.yml new file mode 100644 index 000000000..b4a2cdafa --- /dev/null +++ b/.github/workflows/labeler.yml @@ -0,0 +1,63 @@ +name: Labeler + +on: + issues: + types: [opened] + pull_request: + types: [opened] + +jobs: + label-priority: + runs-on: ubuntu-latest + + steps: + - name: Label New Issue or PR + uses: actions/github-script@v7 + with: + github-token: ${{ secrets.API_TOKEN_GITHUB }} + script: | + let label = ''; + let username = ''; + let issueOrPrNumber = 0; + + if (context.eventName === 'issues') { + username = context.payload.issue.user.login; + issueOrPrNumber = context.payload.issue.number; + } else if (context.eventName === 'pull_request') { + username = context.payload.pull_request.user.login; + issueOrPrNumber = context.payload.pull_request.number; + } + + // Check for Adafruit membership + const adafruitResponse = await github.rest.orgs.checkMembershipForUser({ + org: 'adafruit', + username: username + }); + + if (adafruitResponse.status === 204) { + console.log('Adafruit Member'); + label = 'Prio Urgent'; + } else { + // Check if the user is a contributor + const collaboratorResponse = await github.rest.repos.checkCollaborator({ + owner: context.repo.owner, + repo: context.repo.repo, + username: username + }); + + if (collaboratorResponse.status === 204) { + console.log('Contributor'); + label = 'Prio Higher'; + } else { + console.log('Not a contributor or Adafruit member'); + } + } + + if (label !== '') { + await github.rest.issues.addLabels({ + owner: context.repo.owner, + repo: context.repo.repo, + issue_number: issueOrPrNumber, + labels: [label] + }); + } -- cgit v1.3.1 From ecea890fdc7a0dc4b92a365f0455b7b91258d543 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 26 Mar 2024 16:56:13 +0700 Subject: use usbreset to reset built-in usb 2.0 hub VIA Labs before each test --- .github/workflows/build_esp.yml | 16 +++++++++++----- .github/workflows/cmake_arm.yml | 16 +++++++++++----- 2 files changed, 22 insertions(+), 10 deletions(-) (limited to '.github/workflows') diff --git a/.github/workflows/build_esp.yml b/.github/workflows/build_esp.yml index 07cbf3552..b44da51e6 100644 --- a/.github/workflows/build_esp.yml +++ b/.github/workflows/build_esp.yml @@ -86,11 +86,17 @@ jobs: # USB bus on rpi4 is not stable, reset it before testing - name: Reset USB bus run: | - for port in $(lspci | grep USB | cut -d' ' -f1); do - echo -n "0000:${port}"| sudo tee /sys/bus/pci/drivers/xhci_hcd/unbind; - sleep 0.1; - echo -n "0000:${port}" | sudo tee /sys/bus/pci/drivers/xhci_hcd/bind; - done + lsusb + lsusb -t + # reset VIA Labs 2.0 hub + usbreset 001/002 + + # legacy code + #for port in $(lspci | grep USB | cut -d' ' -f1); do + # echo -n "0000:${port}"| sudo tee /sys/bus/pci/drivers/xhci_hcd/unbind; + # sleep 0.1; + # echo -n "0000:${port}" | sudo tee /sys/bus/pci/drivers/xhci_hcd/bind; + #done - name: Checkout test/hil uses: actions/checkout@v4 diff --git a/.github/workflows/cmake_arm.yml b/.github/workflows/cmake_arm.yml index 732e9b9df..c44d3780e 100644 --- a/.github/workflows/cmake_arm.yml +++ b/.github/workflows/cmake_arm.yml @@ -141,11 +141,17 @@ jobs: # USB bus on rpi4 is not stable, reset it before testing - name: Reset USB bus run: | - for port in $(lspci | grep USB | cut -d' ' -f1); do - echo -n "0000:${port}"| sudo tee /sys/bus/pci/drivers/xhci_hcd/unbind; - sleep 0.1; - echo -n "0000:${port}" | sudo tee /sys/bus/pci/drivers/xhci_hcd/bind; - done + lsusb + lsusb -t + # reset VIA Labs 2.0 hub + usbreset 001/002 + + # legacy code + #for port in $(lspci | grep USB | cut -d' ' -f1); do + # echo -n "0000:${port}"| sudo tee /sys/bus/pci/drivers/xhci_hcd/unbind; + # sleep 0.1; + # echo -n "0000:${port}" | sudo tee /sys/bus/pci/drivers/xhci_hcd/bind; + #done - name: Checkout test/hil uses: actions/checkout@v4 -- cgit v1.3.1 From 7f1e327be3feca54cef56a3fadf49465fa452c06 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 26 Mar 2024 17:13:02 +0700 Subject: add sudo usbreset --- .github/workflows/build_esp.yml | 2 +- .github/workflows/cmake_arm.yml | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to '.github/workflows') diff --git a/.github/workflows/build_esp.yml b/.github/workflows/build_esp.yml index b44da51e6..d283c6535 100644 --- a/.github/workflows/build_esp.yml +++ b/.github/workflows/build_esp.yml @@ -89,7 +89,7 @@ jobs: lsusb lsusb -t # reset VIA Labs 2.0 hub - usbreset 001/002 + sudo usbreset 001/002 # legacy code #for port in $(lspci | grep USB | cut -d' ' -f1); do diff --git a/.github/workflows/cmake_arm.yml b/.github/workflows/cmake_arm.yml index c44d3780e..1e5f61e0e 100644 --- a/.github/workflows/cmake_arm.yml +++ b/.github/workflows/cmake_arm.yml @@ -144,7 +144,7 @@ jobs: lsusb lsusb -t # reset VIA Labs 2.0 hub - usbreset 001/002 + sudo usbreset 001/002 # legacy code #for port in $(lspci | grep USB | cut -d' ' -f1); do -- cgit v1.3.1 From 62864d53560baa0b23a1bbc4ea82faf403ac01dc Mon Sep 17 00:00:00 2001 From: Ha Thach Date: Thu, 28 Mar 2024 12:12:07 +0700 Subject: Update labeler.yml --- .github/workflows/labeler.yml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to '.github/workflows') diff --git a/.github/workflows/labeler.yml b/.github/workflows/labeler.yml index b4a2cdafa..4733c6f06 100644 --- a/.github/workflows/labeler.yml +++ b/.github/workflows/labeler.yml @@ -14,7 +14,7 @@ jobs: - name: Label New Issue or PR uses: actions/github-script@v7 with: - github-token: ${{ secrets.API_TOKEN_GITHUB }} + github-token: ${{ secrets.GITHUB_TOKEN }} script: | let label = ''; let username = ''; -- cgit v1.3.1 From 252e630433ff62f9b3ee010f576b5e42e6d7d1e2 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 3 Apr 2024 13:05:53 +0700 Subject: try catch labeler rest api --- .github/workflows/labeler.yml | 38 ++++++++++++++++++++------------------ 1 file changed, 20 insertions(+), 18 deletions(-) (limited to '.github/workflows') diff --git a/.github/workflows/labeler.yml b/.github/workflows/labeler.yml index 4733c6f06..947b08ca2 100644 --- a/.github/workflows/labeler.yml +++ b/.github/workflows/labeler.yml @@ -28,29 +28,31 @@ jobs: issueOrPrNumber = context.payload.pull_request.number; } - // Check for Adafruit membership - const adafruitResponse = await github.rest.orgs.checkMembershipForUser({ - org: 'adafruit', - username: username - }); - - if (adafruitResponse.status === 204) { - console.log('Adafruit Member'); - label = 'Prio Urgent'; - } else { - // Check if the user is a contributor - const collaboratorResponse = await github.rest.repos.checkCollaborator({ - owner: context.repo.owner, - repo: context.repo.repo, + try { + // Check for Adafruit membership + const adafruitResponse = await github.rest.orgs.checkMembershipForUser({ + org: 'adafruit', username: username }); - if (collaboratorResponse.status === 204) { - console.log('Contributor'); - label = 'Prio Higher'; + if (adafruitResponse.status === 204) { + console.log('Adafruit Member'); + label = 'Prio Urgent'; } else { - console.log('Not a contributor or Adafruit member'); + // If not a Adafruit member, check if the user is a contributor + const collaboratorResponse = await github.rest.repos.checkCollaborator({ + owner: context.repo.owner, + repo: context.repo.repo, + username: username + }); + + if (collaboratorResponse.status === 204) { + console.log('Contributor'); + label = 'Prio Higher'; + } } + } catch (error) { + console.log(`Error processing user ${username}: ${error.message}`); } if (label !== '') { -- cgit v1.3.1 From cbbfbbb57ea8b4ea97ce4f2e2d157da9c25019fe Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 8 Apr 2024 13:16:08 +0700 Subject: add cpuctl and pinctl to tuh_configure() option for max3421 --- .github/workflows/build_iar.yml | 1 + src/host/usbh.h | 10 +++++++--- src/portable/analog/max3421/hcd_max3421.c | 18 +++++++++++------- 3 files changed, 19 insertions(+), 10 deletions(-) (limited to '.github/workflows') diff --git a/.github/workflows/build_iar.yml b/.github/workflows/build_iar.yml index a0a022ecc..499349904 100644 --- a/.github/workflows/build_iar.yml +++ b/.github/workflows/build_iar.yml @@ -28,6 +28,7 @@ concurrency: jobs: cmake: + if: github.repository_owner == 'hathach' runs-on: [self-hosted, Linux, X64, hifiphile] strategy: fail-fast: false diff --git a/src/host/usbh.h b/src/host/usbh.h index 57362c778..359684169 100644 --- a/src/host/usbh.h +++ b/src/host/usbh.h @@ -80,12 +80,16 @@ enum { TUH_CFGID_MAX3421 = 200, }; +typedef struct { + uint8_t max_nak; // max NAK per endpoint per frame + uint8_t cpuctl; // R16: CPU Control Register + uint8_t pinctl; // R17: Pin Control Register. FDUPSPI bit is ignored +} tuh_configure_max3421_t; + typedef union { // For TUH_CFGID_RPI_PIO_USB_CONFIGURATION use pio_usb_configuration_t - struct { - uint8_t max_nak; - } max3421; + tuh_configure_max3421_t max3421; } tuh_configure_param_t; //--------------------------------------------------------------------+ diff --git a/src/portable/analog/max3421/hcd_max3421.c b/src/portable/analog/max3421/hcd_max3421.c index 059f674cd..39afb7505 100644 --- a/src/portable/analog/max3421/hcd_max3421.c +++ b/src/portable/analog/max3421/hcd_max3421.c @@ -233,7 +233,11 @@ typedef struct { static max3421_data_t _hcd_data; // max NAK before giving up in a frame. 0 means infinite NAKs -static uint8_t _max_nak = MAX_NAK_DEFAULT; +static tuh_configure_max3421_t _tuh_cfg = { + .max_nak = MAX_NAK_DEFAULT, + .cpuctl = 0, // default: INT pulse width = 10.6 us + .pinctl = 0, // default: negative edge interrupt +}; //--------------------------------------------------------------------+ // API: SPI transfer with MAX3421E @@ -416,7 +420,7 @@ static void free_ep(uint8_t daddr) { TU_ATTR_ALWAYS_INLINE static inline bool is_ep_pending(max3421_ep_t const * ep) { uint8_t const state = ep->state; return ep->packet_size && (state >= EP_STATE_ATTEMPT_1) && - (_max_nak == 0 || state < EP_STATE_ATTEMPT_1 + _max_nak); + (_tuh_cfg.max_nak == 0 || state < EP_STATE_ATTEMPT_1 + _tuh_cfg.max_nak); } // Find the next pending endpoint using round-robin scheduling, starting from next endpoint. @@ -454,7 +458,7 @@ bool hcd_configure(uint8_t rhport, uint32_t cfg_id, const void* cfg_param) { TU_VERIFY(cfg_id == TUH_CFGID_MAX3421 && cfg_param != NULL); tuh_configure_param_t const* cfg = (tuh_configure_param_t const*) cfg_param; - _max_nak = tu_min8(cfg->max3421.max_nak, EP_STATE_ATTEMPT_MAX-EP_STATE_ATTEMPT_1); + _tuh_cfg = cfg->max3421; return true; } @@ -476,7 +480,7 @@ bool hcd_init(uint8_t rhport) { #endif // full duplex, interrupt negative edge - reg_write(rhport, PINCTL_ADDR, PINCTL_FDUPSPI, false); + reg_write(rhport, PINCTL_ADDR, _tuh_cfg.pinctl | PINCTL_FDUPSPI, false); // v1 is 0x01, v2 is 0x12, v3 is 0x13 uint8_t const revision = reg_read(rhport, REVISION_ADDR, false); @@ -505,7 +509,7 @@ bool hcd_init(uint8_t rhport) { tuh_max3421_int_api(rhport, true); // Enable Interrupt pin - reg_write(rhport, CPUCTL_ADDR, CPUCTL_IE, false); + reg_write(rhport, CPUCTL_ADDR, _tuh_cfg.cpuctl | CPUCTL_IE, false); return true; } @@ -516,9 +520,9 @@ bool hcd_deinit(uint8_t rhport) { // disable interrupt tuh_max3421_int_api(rhport, false); - // reset max3421 + // reset max3421 and power down reg_write(rhport, USBCTL_ADDR, USBCTL_CHIPRES, false); - reg_write(rhport, USBCTL_ADDR, 0, false); + reg_write(rhport, USBCTL_ADDR, USBCTL_PWRDOWN, false); #if OSAL_MUTEX_REQUIRED osal_mutex_delete(_hcd_data.spi_mutex); -- cgit v1.3.1 From ec1a06843c15bdbc249002d7914ff3d663e25f2c Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 9 Apr 2024 17:37:12 +0700 Subject: more try/catch for labeler --- .github/workflows/labeler.yml | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-) (limited to '.github/workflows') diff --git a/.github/workflows/labeler.yml b/.github/workflows/labeler.yml index 947b08ca2..51ff1cfed 100644 --- a/.github/workflows/labeler.yml +++ b/.github/workflows/labeler.yml @@ -28,8 +28,8 @@ jobs: issueOrPrNumber = context.payload.pull_request.number; } + // Check if an Adafruit member try { - // Check for Adafruit membership const adafruitResponse = await github.rest.orgs.checkMembershipForUser({ org: 'adafruit', username: username @@ -38,8 +38,14 @@ jobs: if (adafruitResponse.status === 204) { console.log('Adafruit Member'); label = 'Prio Urgent'; - } else { - // If not a Adafruit member, check if the user is a contributor + } + } catch (error) { + console.log('Not an Adafruit member'); + } + + // Check if a contributor + if (label == '') { + try { const collaboratorResponse = await github.rest.repos.checkCollaborator({ owner: context.repo.owner, repo: context.repo.repo, @@ -50,9 +56,9 @@ jobs: console.log('Contributor'); label = 'Prio Higher'; } + } catch (error) { + console.log('Not a contributor'); } - } catch (error) { - console.log(`Error processing user ${username}: ${error.message}`); } if (label !== '') { -- cgit v1.3.1 From bf240ce9bbdd9ce06422d1136b9b6799fa700ba3 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 9 Apr 2024 19:50:10 +0700 Subject: add permission to lable issue/pr --- .github/workflows/labeler.yml | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to '.github/workflows') diff --git a/.github/workflows/labeler.yml b/.github/workflows/labeler.yml index 51ff1cfed..5b22d977e 100644 --- a/.github/workflows/labeler.yml +++ b/.github/workflows/labeler.yml @@ -9,7 +9,9 @@ on: jobs: label-priority: runs-on: ubuntu-latest - + permissions: + issues: write + pull-requests: write steps: - name: Label New Issue or PR uses: actions/github-script@v7 -- cgit v1.3.1 From 3991ff34f11994e09f77d07e4d1b2fe4810cc01d Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 11 Apr 2024 10:50:26 +0700 Subject: use pull_request_target for labeler --- .github/workflows/labeler.yml | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to '.github/workflows') diff --git a/.github/workflows/labeler.yml b/.github/workflows/labeler.yml index 5b22d977e..4d61fd350 100644 --- a/.github/workflows/labeler.yml +++ b/.github/workflows/labeler.yml @@ -3,7 +3,7 @@ name: Labeler on: issues: types: [opened] - pull_request: + pull_request_target: types: [opened] jobs: @@ -25,9 +25,9 @@ jobs: if (context.eventName === 'issues') { username = context.payload.issue.user.login; issueOrPrNumber = context.payload.issue.number; - } else if (context.eventName === 'pull_request') { - username = context.payload.pull_request.user.login; - issueOrPrNumber = context.payload.pull_request.number; + } else if (context.eventName === 'pull_request_target') { + username = context.payload.pull_request_target.user.login; + issueOrPrNumber = context.payload.pull_request_target.number; } // Check if an Adafruit member -- cgit v1.3.1 From 2fef23d0666580088ad6f3c97909b3267d7c8770 Mon Sep 17 00:00:00 2001 From: Ha Thach Date: Fri, 12 Apr 2024 10:57:27 +0700 Subject: Update labeler.yml --- .github/workflows/labeler.yml | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to '.github/workflows') diff --git a/.github/workflows/labeler.yml b/.github/workflows/labeler.yml index 4d61fd350..c3cc59d0d 100644 --- a/.github/workflows/labeler.yml +++ b/.github/workflows/labeler.yml @@ -26,8 +26,8 @@ jobs: username = context.payload.issue.user.login; issueOrPrNumber = context.payload.issue.number; } else if (context.eventName === 'pull_request_target') { - username = context.payload.pull_request_target.user.login; - issueOrPrNumber = context.payload.pull_request_target.number; + username = context.payload.pull_request.user.login; + issueOrPrNumber = context.payload.pull_request.number; } // Check if an Adafruit member -- cgit v1.3.1 From b2acbd305d29cea15fb4bd8e5cbc464546fdd8b7 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 15 Apr 2024 12:52:10 +0700 Subject: use cmake to build msp430 --- .github/workflows/build_msp430.yml | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to '.github/workflows') diff --git a/.github/workflows/build_msp430.yml b/.github/workflows/build_msp430.yml index f913df913..53921b308 100644 --- a/.github/workflows/build_msp430.yml +++ b/.github/workflows/build_msp430.yml @@ -63,8 +63,7 @@ jobs: - name: Set Toolchain Path run: echo >> $GITHUB_PATH `echo ~/cache/toolchain/*/bin` - - name: Get Dependencies - run: python3 tools/get_deps.py ${{ matrix.family }} - - name: Build - run: python3 tools/build_make.py ${{ matrix.family }} + run: | + python3 tools/get_deps.py ${{ matrix.family }} + python tools/build_cmake.py ${{ matrix.family }} -DCMAKE_BUILD_TYPE=MinSizeRel -- cgit v1.3.1 From 9561e3826700c872ccde111d52cb381da939a25c Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 15 Apr 2024 22:35:52 +0700 Subject: install ninja build for msp430 --- .github/workflows/build_msp430.yml | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to '.github/workflows') diff --git a/.github/workflows/build_msp430.yml b/.github/workflows/build_msp430.yml index 53921b308..95d212708 100644 --- a/.github/workflows/build_msp430.yml +++ b/.github/workflows/build_msp430.yml @@ -61,7 +61,9 @@ jobs: tar -C ~/cache/toolchain -xaf toolchain.tar.bz2 - name: Set Toolchain Path - run: echo >> $GITHUB_PATH `echo ~/cache/toolchain/*/bin` + run: | + echo >> $GITHUB_PATH `echo ~/cache/toolchain/*/bin` + sudo apt install -y ninja-build - name: Build run: | -- cgit v1.3.1 From 982713ad476f42ccb9786e40417d91ac11cb46be Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 17 Apr 2024 21:51:10 +0700 Subject: add clang to ci build --- .github/workflows/cmake_arm.yml | 93 ++++++++++++++++++++++++++++++++++++----- 1 file changed, 82 insertions(+), 11 deletions(-) (limited to '.github/workflows') diff --git a/.github/workflows/cmake_arm.yml b/.github/workflows/cmake_arm.yml index 1e5f61e0e..52aaa71e8 100644 --- a/.github/workflows/cmake_arm.yml +++ b/.github/workflows/cmake_arm.yml @@ -28,9 +28,9 @@ concurrency: jobs: # --------------------------------------- - # Build ARM family + # Build ARM with GCC # --------------------------------------- - build-arm: + arm-gcc: runs-on: ubuntu-latest strategy: fail-fast: false @@ -68,9 +68,6 @@ jobs: with: release: '11.2-2022.02' - - name: Install Ninja - run: sudo apt install -y ninja-build - - name: Checkout TinyUSB uses: actions/checkout@v4 @@ -82,13 +79,12 @@ jobs: ref: develop path: pico-sdk - - name: Get Dependencies - run: python3 tools/get_deps.py ${{ matrix.family }} - - name: Build - run: python tools/build_cmake.py ${{ matrix.family }} -DCMAKE_BUILD_TYPE=MinSizeRel + run: | + sudo apt install -y ninja-build + python3 tools/get_deps.py ${{ matrix.family }} + python tools/build_cmake.py ${{ matrix.family }} -DCMAKE_BUILD_TYPE=MinSizeRel env: - # for rp2040, there is no harm if defined for other families PICO_SDK_PATH: ${{ github.workspace }}/pico-sdk - name: Upload Artifacts for Hardware Testing (rp2040) @@ -115,6 +111,81 @@ jobs: path: | cmake-build/cmake-build-itsybitsy_m4/*/*/*.bin + # --------------------------------------- + # Build ARM with Clang + # --------------------------------------- + arm-clang: + runs-on: ubuntu-latest + strategy: + fail-fast: false + matrix: + family: + # Alphabetical order + - 'imxrt' + - 'kinetis_k kinetis_kl' + - 'lpc17 lpc18 lpc40 lpc43' + - 'lpc54 lpc55' + - 'mcx' + - 'nrf' + - 'ra' + - 'rp2040' + - 'samd21' + - 'samd51' + - 'stm32f0' + - 'stm32f1' + - 'stm32f4' + - 'stm32f7' + - 'stm32g0' + - 'stm32g4' + - 'stm32h5' + - 'stm32h7' + - 'stm32l4' + - 'stm32u5' + steps: + - name: Setup Python + uses: actions/setup-python@v5 + with: + python-version: '3.x' + + - name: Checkout TinyUSB + uses: actions/checkout@v4 + + - name: Set Toolchain URL + run: echo >> $GITHUB_ENV TOOLCHAIN_URL=https://github.com/ARM-software/LLVM-embedded-toolchain-for-Arm/releases/download/release-17.0.1/LLVMEmbeddedToolchainForArm-17.0.1-Linux-x86_64.tar.xz + + - name: Cache Toolchain + uses: actions/cache@v3 + id: cache-toolchain + with: + path: ~/cache/ + key: ${{ runner.os }}-24-04-17-${{ env.TOOLCHAIN_URL }} + + - name: Install Toolchain + if: steps.cache-toolchain.outputs.cache-hit != 'true' + run: | + mkdir -p ~/cache/toolchain + wget --progress=dot:mega $TOOLCHAIN_URL -O toolchain.tar.xz + tar -C ~/cache/toolchain -xaf toolchain.tar.xz + + - name: Set Toolchain Path + run: echo >> $GITHUB_PATH `echo ~/cache/toolchain/*/bin` + + - name: Checkout pico-sdk for rp2040 + if: matrix.family == 'rp2040' + uses: actions/checkout@v4 + with: + repository: raspberrypi/pico-sdk + ref: develop + path: pico-sdk + + - name: Build + run: | + sudo apt install -y ninja-build + python3 tools/get_deps.py ${{ matrix.family }} + python tools/build_cmake.py ${{ matrix.family }} -DCMAKE_BUILD_TYPE=MinSizeRel + env: + PICO_SDK_PATH: ${{ github.workspace }}/pico-sdk + # --------------------------------------- # Hardware in the loop (HIL) # Current self-hosted instance is running on an RPI4. For attached hardware checkout hil_pi4.json @@ -122,7 +193,7 @@ jobs: hil-test: # run only with hathach's commit due to limited resource on RPI4 if: github.repository_owner == 'hathach' - needs: build-arm + needs: arm-gcc runs-on: [self-hosted, rp2040, nrf52840, hardware-in-the-loop] strategy: fail-fast: false -- cgit v1.3.1 From 5ca68ec049c56cd04db8fde2c9fb50f19a4e9263 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 17 Apr 2024 22:13:01 +0700 Subject: forgot to specify clang --- .github/workflows/cmake_arm.yml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to '.github/workflows') diff --git a/.github/workflows/cmake_arm.yml b/.github/workflows/cmake_arm.yml index 52aaa71e8..0c584eb9a 100644 --- a/.github/workflows/cmake_arm.yml +++ b/.github/workflows/cmake_arm.yml @@ -182,7 +182,7 @@ jobs: run: | sudo apt install -y ninja-build python3 tools/get_deps.py ${{ matrix.family }} - python tools/build_cmake.py ${{ matrix.family }} -DCMAKE_BUILD_TYPE=MinSizeRel + python tools/build_cmake.py ${{ matrix.family }} -DTOOLCHAIN=clang -DCMAKE_BUILD_TYPE=MinSizeRel env: PICO_SDK_PATH: ${{ github.workspace }}/pico-sdk -- cgit v1.3.1 From 71e0fd11c8e0da9df7688fdfbfe33d49f4687fbf Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 23 Apr 2024 11:14:11 +0700 Subject: clang skip mcx since it does not work any more with gcc --- .github/workflows/cmake_arm.yml | 14 ++++-- hw/bsp/mcx/family.cmake | 109 ++++++++++++++++++++-------------------- 2 files changed, 63 insertions(+), 60 deletions(-) (limited to '.github/workflows') diff --git a/.github/workflows/cmake_arm.yml b/.github/workflows/cmake_arm.yml index 0c584eb9a..21f4c2324 100644 --- a/.github/workflows/cmake_arm.yml +++ b/.github/workflows/cmake_arm.yml @@ -79,11 +79,13 @@ jobs: ref: develop path: pico-sdk - - name: Build + - name: Get Dependencies run: | sudo apt install -y ninja-build python3 tools/get_deps.py ${{ matrix.family }} - python tools/build_cmake.py ${{ matrix.family }} -DCMAKE_BUILD_TYPE=MinSizeRel + + - name: Build + run: python tools/build_cmake.py ${{ matrix.family }} -DTOOLCHAIN=clang -DCMAKE_BUILD_TYPE=MinSizeRel env: PICO_SDK_PATH: ${{ github.workspace }}/pico-sdk @@ -125,7 +127,7 @@ jobs: - 'kinetis_k kinetis_kl' - 'lpc17 lpc18 lpc40 lpc43' - 'lpc54 lpc55' - - 'mcx' + #- 'mcx' not working with gcc anymore, need to fix this first - 'nrf' - 'ra' - 'rp2040' @@ -178,11 +180,13 @@ jobs: ref: develop path: pico-sdk - - name: Build + - name: Get Dependencies run: | sudo apt install -y ninja-build python3 tools/get_deps.py ${{ matrix.family }} - python tools/build_cmake.py ${{ matrix.family }} -DTOOLCHAIN=clang -DCMAKE_BUILD_TYPE=MinSizeRel + + - name: Build + run: python tools/build_cmake.py ${{ matrix.family }} -DTOOLCHAIN=clang -DCMAKE_BUILD_TYPE=MinSizeRel env: PICO_SDK_PATH: ${{ github.workspace }}/pico-sdk diff --git a/hw/bsp/mcx/family.cmake b/hw/bsp/mcx/family.cmake index c8591b569..223afb9ec 100644 --- a/hw/bsp/mcx/family.cmake +++ b/hw/bsp/mcx/family.cmake @@ -1,9 +1,5 @@ include_guard() -if (NOT BOARD) - message(FATAL_ERROR "BOARD not specified") -endif () - set(SDK_DIR ${TOP}/hw/mcu/nxp/mcux-sdk) set(CMSIS_DIR ${TOP}/lib/CMSIS_5) @@ -28,60 +24,63 @@ set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOL #------------------------------------ # only need to be built ONCE for all examples function(add_board_target BOARD_TARGET) - if (NOT TARGET ${BOARD_TARGET}) - add_library(${BOARD_TARGET} STATIC - # external driver - #lib/sct_neopixel/sct_neopixel.c - - # driver - ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_gpio.c - ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_common_arm.c - ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_lpuart.c - - # mcu - ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_clock.c - ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_reset.c - ${SDK_DIR}/devices/${MCU_VARIANT}/system_${MCU_CORE}.c - ) + if (TARGET ${BOARD_TARGET}) + return() + endif() + + if (NOT DEFINED LD_FILE_GNU) + set(LD_FILE_GNU ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/${MCU_CORE}_flash.ld) + endif () + set(LD_FILE_Clang ${LD_FILE_GNU}) + + if (NOT DEFINED STARTUP_FILE_GNU) + set(STARTUP_FILE_GNU ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/startup_${MCU_CORE}.S) + endif() + set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) + + add_library(${BOARD_TARGET} STATIC + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} + # driver + ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_gpio.c + ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_common_arm.c + ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_lpuart.c + # mcu + ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_clock.c + ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_reset.c + ${SDK_DIR}/devices/${MCU_VARIANT}/system_${MCU_CORE}.c + ) + target_include_directories(${BOARD_TARGET} PUBLIC + ${CMSIS_DIR}/CMSIS/Core/Include + ${SDK_DIR}/devices/${MCU_VARIANT} + ${SDK_DIR}/devices/${MCU_VARIANT}/drivers + ) - if (${FAMILY_MCUS} STREQUAL "MCXN9") - target_sources(${BOARD_TARGET} PRIVATE - ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_lpflexcomm.c - ) - elseif(${FAMILY_MCUS} STREQUAL "MCXA15") - target_sources(${BOARD_TARGET} PRIVATE - ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_spc.c + if (${FAMILY_MCUS} STREQUAL "MCXN9") + target_sources(${BOARD_TARGET} PRIVATE + ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_lpflexcomm.c + ) + elseif(${FAMILY_MCUS} STREQUAL "MCXA15") + target_sources(${BOARD_TARGET} PRIVATE + ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_spc.c + ) + endif() + + update_board(${BOARD_TARGET}) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + --specs=nosys.specs --specs=nano.specs + #-nostartfiles ) - endif() - - # target_compile_definitions(${BOARD_TARGET} PUBLIC - # ) - target_include_directories(${BOARD_TARGET} PUBLIC - # driver - # mcu - ${CMSIS_DIR}/CMSIS/Core/Include - ${SDK_DIR}/devices/${MCU_VARIANT} - ${SDK_DIR}/devices/${MCU_VARIANT}/drivers + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_Clang}" + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" ) - - update_board(${BOARD_TARGET}) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_sources(${BOARD_TARGET} PUBLIC - ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/startup_${MCU_CORE}.S - ) - target_link_options(${BOARD_TARGET} PUBLIC - # linker file - "LINKER:--script=${SDK_DIR}/devices/${MCU_VARIANT}/gcc/${MCU_CORE}_flash.ld" - # nanolib - --specs=nosys.specs - --specs=nano.specs - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--config=${LD_FILE_IAR}" - ) - endif () endif () endfunction() -- cgit v1.3.1 From 81cdf3ce554674a3c7c71f1f59996a0f3092dc61 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 23 Apr 2024 11:17:20 +0700 Subject: bump up gcc to 12.3 --- .github/workflows/cmake_arm.yml | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to '.github/workflows') diff --git a/.github/workflows/cmake_arm.yml b/.github/workflows/cmake_arm.yml index 21f4c2324..512db64cf 100644 --- a/.github/workflows/cmake_arm.yml +++ b/.github/workflows/cmake_arm.yml @@ -66,7 +66,7 @@ jobs: - name: Install ARM GCC uses: carlosperate/arm-none-eabi-gcc-action@v1 with: - release: '11.2-2022.02' + release: '12.3.Rel1' - name: Checkout TinyUSB uses: actions/checkout@v4 @@ -129,7 +129,7 @@ jobs: - 'lpc54 lpc55' #- 'mcx' not working with gcc anymore, need to fix this first - 'nrf' - - 'ra' + #- 'ra' port later - 'rp2040' - 'samd21' - 'samd51' -- cgit v1.3.1 From a410eb345c3c1f1c1da447204a2b2c4a4dad2af4 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 23 Apr 2024 11:25:01 +0700 Subject: fix ci typo --- .github/workflows/cmake_arm.yml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to '.github/workflows') diff --git a/.github/workflows/cmake_arm.yml b/.github/workflows/cmake_arm.yml index 512db64cf..bc2a98b59 100644 --- a/.github/workflows/cmake_arm.yml +++ b/.github/workflows/cmake_arm.yml @@ -85,7 +85,7 @@ jobs: python3 tools/get_deps.py ${{ matrix.family }} - name: Build - run: python tools/build_cmake.py ${{ matrix.family }} -DTOOLCHAIN=clang -DCMAKE_BUILD_TYPE=MinSizeRel + run: python tools/build_cmake.py ${{ matrix.family }} -DCMAKE_BUILD_TYPE=MinSizeRel env: PICO_SDK_PATH: ${{ github.workspace }}/pico-sdk -- cgit v1.3.1 From 0f3d6c61b563f8776d6e9f90a8b459a513f79fc1 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 23 Apr 2024 12:04:08 +0700 Subject: port clang stm32: f1, f2, f3 --- .github/workflows/build_arm.yml | 1 - .github/workflows/cmake_arm.yml | 4 + hw/bsp/stm32f1/family.cmake | 26 +- hw/bsp/stm32f2/boards/stm32f207nucleo/board.cmake | 10 + hw/bsp/stm32f2/boards/stm32f207nucleo/board.h | 57 ++++ .../boards/stm32f207nucleo/stm32f207nucleo.c | 214 ------------ hw/bsp/stm32f2/family.c | 150 +++++++++ hw/bsp/stm32f2/family.cmake | 112 +++++++ hw/bsp/stm32f3/boards/stm32f303disco/board.cmake | 10 + hw/bsp/stm32f3/boards/stm32f303disco/board.h | 61 ++++ .../stm32f3/boards/stm32f303disco/stm32f303disco.c | 216 ------------- .../boards/stm32f303disco/stm32f3xx_hal_conf.h | 357 --------------------- hw/bsp/stm32f3/family.c | 152 +++++++++ hw/bsp/stm32f3/family.cmake | 110 +++++++ hw/bsp/stm32f3/stm32f3xx_hal_conf.h | 357 +++++++++++++++++++++ src/portable/synopsys/dwc2/dcd_dwc2.c | 8 +- 16 files changed, 1043 insertions(+), 802 deletions(-) create mode 100644 hw/bsp/stm32f2/boards/stm32f207nucleo/board.cmake create mode 100644 hw/bsp/stm32f2/boards/stm32f207nucleo/board.h delete mode 100644 hw/bsp/stm32f2/boards/stm32f207nucleo/stm32f207nucleo.c create mode 100644 hw/bsp/stm32f2/family.c create mode 100644 hw/bsp/stm32f2/family.cmake create mode 100644 hw/bsp/stm32f3/boards/stm32f303disco/board.cmake create mode 100644 hw/bsp/stm32f3/boards/stm32f303disco/board.h delete mode 100644 hw/bsp/stm32f3/boards/stm32f303disco/stm32f303disco.c delete mode 100644 hw/bsp/stm32f3/boards/stm32f303disco/stm32f3xx_hal_conf.h create mode 100644 hw/bsp/stm32f3/family.c create mode 100644 hw/bsp/stm32f3/family.cmake create mode 100644 hw/bsp/stm32f3/stm32f3xx_hal_conf.h (limited to '.github/workflows') diff --git a/.github/workflows/build_arm.yml b/.github/workflows/build_arm.yml index 9f3270c91..12e6615ea 100644 --- a/.github/workflows/build_arm.yml +++ b/.github/workflows/build_arm.yml @@ -41,7 +41,6 @@ jobs: - 'lpc51' - 'mm32 msp432e4' - 'samd11 same5x saml2x' - - 'stm32f2 stm32f3' - 'stm32l0 stm32wb' - 'tm4c123 xmc4000' steps: diff --git a/.github/workflows/cmake_arm.yml b/.github/workflows/cmake_arm.yml index bc2a98b59..8eb1e3f74 100644 --- a/.github/workflows/cmake_arm.yml +++ b/.github/workflows/cmake_arm.yml @@ -49,6 +49,8 @@ jobs: - 'samd51' - 'stm32f0' - 'stm32f1' + - 'stm32f2' + - 'stm32f3' - 'stm32f4' - 'stm32f7' - 'stm32g0' @@ -135,6 +137,8 @@ jobs: - 'samd51' - 'stm32f0' - 'stm32f1' + - 'stm32f2' + - 'stm32f3' - 'stm32f4' - 'stm32f7' - 'stm32g0' diff --git a/hw/bsp/stm32f1/family.cmake b/hw/bsp/stm32f1/family.cmake index 6657c85ce..cf7e8e9b1 100644 --- a/hw/bsp/stm32f1/family.cmake +++ b/hw/bsp/stm32f1/family.cmake @@ -1,9 +1,5 @@ include_guard() -if (NOT BOARD) - message(FATAL_ERROR "BOARD not specified") -endif () - set(ST_FAMILY f1) set(ST_PREFIX stm32${ST_FAMILY}xx) @@ -29,8 +25,14 @@ function(add_board_target BOARD_TARGET) if (NOT TARGET ${BOARD_TARGET}) # Startup & Linker script set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s) + set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s) + set(LD_FILE_Clang ${LD_FILE_GNU}) + if (NOT DEFINED LD_FILE_IAR) + set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf) + endif () + add_library(${BOARD_TARGET} STATIC ${ST_CMSIS}/Source/Templates/system_${ST_PREFIX}.c ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal.c @@ -47,10 +49,8 @@ function(add_board_target BOARD_TARGET) ${ST_CMSIS}/Include ${ST_HAL_DRIVER}/Inc ) - target_compile_options(${BOARD_TARGET} PUBLIC - ) - target_compile_definitions(${BOARD_TARGET} PUBLIC - ) + #target_compile_options(${BOARD_TARGET} PUBLIC) + #target_compile_definitions(${BOARD_TARGET} PUBLIC) update_board(${BOARD_TARGET}) @@ -58,9 +58,11 @@ function(add_board_target BOARD_TARGET) target_link_options(${BOARD_TARGET} PUBLIC "LINKER:--script=${LD_FILE_GNU}" -nostartfiles - # nanolib - --specs=nosys.specs - --specs=nano.specs + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_Clang}" ) elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") target_link_options(${BOARD_TARGET} PUBLIC @@ -106,5 +108,5 @@ function(family_configure_example TARGET RTOS) # Flashing family_flash_stlink(${TARGET}) - #family_flash_jlink(${TARGET}) + family_flash_jlink(${TARGET}) endfunction() diff --git a/hw/bsp/stm32f2/boards/stm32f207nucleo/board.cmake b/hw/bsp/stm32f2/boards/stm32f207nucleo/board.cmake new file mode 100644 index 000000000..8f78e6295 --- /dev/null +++ b/hw/bsp/stm32f2/boards/stm32f207nucleo/board.cmake @@ -0,0 +1,10 @@ +set(MCU_VARIANT stm32f207xx) +set(JLINK_DEVICE stm32f207zg) + +set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32F207ZGTx_FLASH.ld) + +function(update_board TARGET) + target_compile_definitions(${TARGET} PUBLIC + STM32F207xx + ) +endfunction() diff --git a/hw/bsp/stm32f2/boards/stm32f207nucleo/board.h b/hw/bsp/stm32f2/boards/stm32f207nucleo/board.h new file mode 100644 index 000000000..3301ede27 --- /dev/null +++ b/hw/bsp/stm32f2/boards/stm32f207nucleo/board.h @@ -0,0 +1,57 @@ +#ifndef BOARD_H +#define BOARD_H + +#define LED_PORT GPIOB +#define LED_PIN GPIO_PIN_14 +#define LED_STATE_ON 1 + +#define BUTTON_PORT GPIOC +#define BUTTON_PIN GPIO_PIN_13 +#define BUTTON_STATE_ACTIVE 1 + + +/** + * @brief System Clock Configuration + * The system Clock is configured as follow : + * System Clock source = PLL (HSE) + * SYSCLK(Hz) = 120000000 + * HCLK(Hz) = 120000000 + * AHB Prescaler = 1 + * APB1 Prescaler = 4 + * APB2 Prescaler = 2 + * HSE Frequency(Hz) = 8000000 + * PLL_M = HSE_VALUE/1000000 + * PLL_N = 240 + * PLL_P = 2 + * PLL_Q = 5 + * VDD(V) = 3.3 + * Flash Latency(WS) = 3 + * @param None + * @retval None + */ +static inline void SystemClock_Config(void) { + RCC_ClkInitTypeDef RCC_ClkInitStruct; + RCC_OscInitTypeDef RCC_OscInitStruct; + + /* Enable HSE Oscillator and activate PLL with HSE as source */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; + RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; + RCC_OscInitStruct.PLL.PLLM = HSE_VALUE / 1000000; + RCC_OscInitStruct.PLL.PLLN = 240; + RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2; + RCC_OscInitStruct.PLL.PLLQ = 5; + HAL_RCC_OscConfig(&RCC_OscInitStruct); + + /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 + clocks dividers */ + RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4; + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2; + HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_3); +} + +#endif diff --git a/hw/bsp/stm32f2/boards/stm32f207nucleo/stm32f207nucleo.c b/hw/bsp/stm32f2/boards/stm32f207nucleo/stm32f207nucleo.c deleted file mode 100644 index dfbe7b743..000000000 --- a/hw/bsp/stm32f2/boards/stm32f207nucleo/stm32f207nucleo.c +++ /dev/null @@ -1,214 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "bsp/board_api.h" - -#include "stm32f2xx_hal.h" - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ -void OTG_FS_IRQHandler(void) -{ - tud_int_handler(0); -} - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM -//--------------------------------------------------------------------+ - -#define LED_PORT GPIOB -#define LED_PIN GPIO_PIN_14 -#define LED_STATE_ON 1 - -#define BUTTON_PORT GPIOC -#define BUTTON_PIN GPIO_PIN_13 -#define BUTTON_STATE_ACTIVE 1 - - -// enable all LED, Button, Uart, USB clock -static void all_rcc_clk_enable(void) -{ - __HAL_RCC_GPIOA_CLK_ENABLE(); // USB D+, D- - __HAL_RCC_GPIOB_CLK_ENABLE(); // LED - __HAL_RCC_GPIOC_CLK_ENABLE(); // Button -} - -/** - * @brief System Clock Configuration - * The system Clock is configured as follow : - * System Clock source = PLL (HSE) - * SYSCLK(Hz) = 120000000 - * HCLK(Hz) = 120000000 - * AHB Prescaler = 1 - * APB1 Prescaler = 4 - * APB2 Prescaler = 2 - * HSE Frequency(Hz) = 8000000 - * PLL_M = HSE_VALUE/1000000 - * PLL_N = 240 - * PLL_P = 2 - * PLL_Q = 5 - * VDD(V) = 3.3 - * Flash Latency(WS) = 3 - * @param None - * @retval None - */ -void SystemClock_Config(void) -{ - RCC_ClkInitTypeDef RCC_ClkInitStruct; - RCC_OscInitTypeDef RCC_OscInitStruct; - - /* Enable HSE Oscillator and activate PLL with HSE as source */ - RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; - RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS; - RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; - RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; - RCC_OscInitStruct.PLL.PLLM = HSE_VALUE/1000000; - RCC_OscInitStruct.PLL.PLLN = 240; - RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2; - RCC_OscInitStruct.PLL.PLLQ = 5; - HAL_RCC_OscConfig(&RCC_OscInitStruct); - - /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 - clocks dividers */ - RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); - RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; - RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; - RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4; - RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2; - HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_3); -} - -void board_init(void) -{ - SystemClock_Config(); - - #if CFG_TUSB_OS == OPT_OS_NONE - // 1ms tick timer - SysTick_Config(SystemCoreClock / 1000); - #endif - - - all_rcc_clk_enable(); - - GPIO_InitTypeDef GPIO_InitStruct; - - // LED - GPIO_InitStruct.Pin = LED_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; - GPIO_InitStruct.Pull = GPIO_PULLUP; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - HAL_GPIO_Init(LED_PORT, &GPIO_InitStruct); - - board_led_write(false); - - // Button - GPIO_InitStruct.Pin = BUTTON_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_INPUT; - GPIO_InitStruct.Pull = GPIO_PULLDOWN; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - HAL_GPIO_Init(BUTTON_PORT, &GPIO_InitStruct); - - /* Configure DM DP Pins */ - GPIO_InitStruct.Pin = (GPIO_PIN_11 | GPIO_PIN_12); - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Speed = GPIO_SPEED_HIGH; - GPIO_InitStruct.Alternate = GPIO_AF10_OTG_FS; - HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); - - /* Configure VBUS Pin */ - GPIO_InitStruct.Pin = GPIO_PIN_9; - GPIO_InitStruct.Mode = GPIO_MODE_INPUT; - GPIO_InitStruct.Pull = GPIO_NOPULL; - HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); - - /* Configure ID pin */ - GPIO_InitStruct.Pin = GPIO_PIN_10; - GPIO_InitStruct.Mode = GPIO_MODE_AF_OD; - GPIO_InitStruct.Pull = GPIO_PULLUP; - GPIO_InitStruct.Alternate = GPIO_AF10_OTG_FS; - HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); - - /* Enable USB FS Clocks */ - __HAL_RCC_USB_OTG_FS_CLK_ENABLE(); - - // Enable VBUS sense (B device) via pin PA9 - USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_NOVBUSSENS; - USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBUSBSEN; -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - HAL_GPIO_WritePin(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); -} - -uint32_t board_button_read(void) -{ - return BUTTON_STATE_ACTIVE == HAL_GPIO_ReadPin(BUTTON_PORT, BUTTON_PIN); -} - -int board_uart_read(uint8_t* buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -int board_uart_write(void const * buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void SysTick_Handler (void) -{ - HAL_IncTick(); - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif - -void HardFault_Handler (void) -{ - __asm("BKPT #0\n"); -} - -// Required by __libc_init_array in startup code if we are compiling using -// -nostdlib/-nostartfiles. -void _init(void) -{ - -} diff --git a/hw/bsp/stm32f2/family.c b/hw/bsp/stm32f2/family.c new file mode 100644 index 000000000..8b1c56423 --- /dev/null +++ b/hw/bsp/stm32f2/family.c @@ -0,0 +1,150 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "stm32f2xx_hal.h" +#include "bsp/board_api.h" +#include "board.h" + +//--------------------------------------------------------------------+ +// Forward USB interrupt events to TinyUSB IRQ Handler +//--------------------------------------------------------------------+ +void OTG_FS_IRQHandler(void) { + tud_int_handler(0); +} + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM +//--------------------------------------------------------------------+ + +// enable all LED, Button, Uart, USB clock +static void all_rcc_clk_enable(void) { + __HAL_RCC_GPIOA_CLK_ENABLE(); // USB D+, D- + __HAL_RCC_GPIOB_CLK_ENABLE(); // LED + __HAL_RCC_GPIOC_CLK_ENABLE(); // Button +} + +void board_init(void) { + SystemClock_Config(); + + #if CFG_TUSB_OS == OPT_OS_NONE + // 1ms tick timer + SysTick_Config(SystemCoreClock / 1000); + #endif + + all_rcc_clk_enable(); + + GPIO_InitTypeDef GPIO_InitStruct; + + // LED + GPIO_InitStruct.Pin = LED_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; + GPIO_InitStruct.Pull = GPIO_PULLUP; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + HAL_GPIO_Init(LED_PORT, &GPIO_InitStruct); + + board_led_write(false); + + // Button + GPIO_InitStruct.Pin = BUTTON_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_INPUT; + GPIO_InitStruct.Pull = GPIO_PULLDOWN; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + HAL_GPIO_Init(BUTTON_PORT, &GPIO_InitStruct); + + /* Configure DM DP Pins */ + GPIO_InitStruct.Pin = (GPIO_PIN_11 | GPIO_PIN_12); + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF10_OTG_FS; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + /* Configure VBUS Pin */ + GPIO_InitStruct.Pin = GPIO_PIN_9; + GPIO_InitStruct.Mode = GPIO_MODE_INPUT; + GPIO_InitStruct.Pull = GPIO_NOPULL; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + /* Configure ID pin */ + GPIO_InitStruct.Pin = GPIO_PIN_10; + GPIO_InitStruct.Mode = GPIO_MODE_AF_OD; + GPIO_InitStruct.Pull = GPIO_PULLUP; + GPIO_InitStruct.Alternate = GPIO_AF10_OTG_FS; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + /* Enable USB FS Clocks */ + __HAL_RCC_USB_OTG_FS_CLK_ENABLE(); + + // Enable VBUS sense (B device) via pin PA9 + USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_NOVBUSSENS; + USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBUSBSEN; +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) { + HAL_GPIO_WritePin(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1 - LED_STATE_ON)); +} + +uint32_t board_button_read(void) { + return BUTTON_STATE_ACTIVE == HAL_GPIO_ReadPin(BUTTON_PORT, BUTTON_PIN); +} + +int board_uart_read(uint8_t* buf, int len) { + (void) buf; + (void) len; + return 0; +} + +int board_uart_write(void const* buf, int len) { + (void) buf; + (void) len; + return 0; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; + +void SysTick_Handler(void) { + HAL_IncTick(); + system_ticks++; +} + +uint32_t board_millis(void) { + return system_ticks; +} +#endif + +void HardFault_Handler(void) { + __asm("BKPT #0\n"); +} + +// Required by __libc_init_array in startup code if we are compiling using +// -nostdlib/-nostartfiles. +void _init(void) { +} diff --git a/hw/bsp/stm32f2/family.cmake b/hw/bsp/stm32f2/family.cmake new file mode 100644 index 000000000..862680bce --- /dev/null +++ b/hw/bsp/stm32f2/family.cmake @@ -0,0 +1,112 @@ +include_guard() + +set(ST_FAMILY f2) +set(ST_PREFIX stm32${ST_FAMILY}xx) + +set(ST_HAL_DRIVER ${TOP}/hw/mcu/st/stm32${ST_FAMILY}xx_hal_driver) +set(ST_CMSIS ${TOP}/hw/mcu/st/cmsis_device_${ST_FAMILY}) +set(CMSIS_5 ${TOP}/lib/CMSIS_5) + +# include board specific +include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) + +# toolchain set up +set(CMAKE_SYSTEM_PROCESSOR cortex-m3 CACHE INTERNAL "System Processor") +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) + +set(FAMILY_MCUS STM32F2 CACHE INTERNAL "") + + +#------------------------------------ +# BOARD_TARGET +#------------------------------------ +# only need to be built ONCE for all examples +function(add_board_target BOARD_TARGET) + if (NOT TARGET ${BOARD_TARGET}) + # Startup & Linker script + set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s) + set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) + set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s) + + set(LD_FILE_Clang ${LD_FILE_GNU}) + if (NOT DEFINED LD_FILE_IAR) + set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf) + endif () + + add_library(${BOARD_TARGET} STATIC + ${ST_CMSIS}/Source/Templates/system_${ST_PREFIX}.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_cortex.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc_ex.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_gpio.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} + ) + target_include_directories(${BOARD_TARGET} PUBLIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${CMSIS_5}/CMSIS/Core/Include + ${ST_CMSIS}/Include + ${ST_HAL_DRIVER}/Inc + ) + #target_compile_options(${BOARD_TARGET} PUBLIC) + #target_compile_definitions(${BOARD_TARGET} PUBLIC) + + update_board(${BOARD_TARGET}) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -nostartfiles + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_Clang}" + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () + endif () +endfunction() + + +#------------------------------------ +# Functions +#------------------------------------ +function(family_configure_example TARGET RTOS) + family_configure_common(${TARGET} ${RTOS}) + + # Board target + add_board_target(board_${BOARD}) + + #---------- Port Specific ---------- + # These files are built for each example since it depends on example's tusb_config.h + target_sources(${TARGET} PUBLIC + # BSP + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ) + target_include_directories(${TARGET} PUBLIC + # family, hw, board + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} + ) + + # Add TinyUSB target and port source + family_add_tinyusb(${TARGET} OPT_MCU_STM32F2 ${RTOS}) + target_sources(${TARGET}-tinyusb PUBLIC + ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c + ) + target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + + # Link dependencies + target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) + + # Flashing + family_flash_stlink(${TARGET}) + family_flash_jlink(${TARGET}) +endfunction() diff --git a/hw/bsp/stm32f3/boards/stm32f303disco/board.cmake b/hw/bsp/stm32f3/boards/stm32f303disco/board.cmake new file mode 100644 index 000000000..7e02a7910 --- /dev/null +++ b/hw/bsp/stm32f3/boards/stm32f303disco/board.cmake @@ -0,0 +1,10 @@ +set(MCU_VARIANT stm32f303xc) +set(JLINK_DEVICE stm32f303vc) + +set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32F303VCTx_FLASH.ld) + +function(update_board TARGET) + target_compile_definitions(${TARGET} PUBLIC + STM32F303xC + ) +endfunction() diff --git a/hw/bsp/stm32f3/boards/stm32f303disco/board.h b/hw/bsp/stm32f3/boards/stm32f303disco/board.h new file mode 100644 index 000000000..706149b49 --- /dev/null +++ b/hw/bsp/stm32f3/boards/stm32f303disco/board.h @@ -0,0 +1,61 @@ +#ifndef BOARD_H +#define BOARD_H + +#define LED_PORT GPIOE +#define LED_PIN GPIO_PIN_9 +#define LED_STATE_ON 1 + +#define BUTTON_PORT GPIOA +#define BUTTON_PIN GPIO_PIN_0 +#define BUTTON_STATE_ACTIVE 1 + + +/** + * @brief System Clock Configuration + * The system Clock is configured as follow : + * System Clock source = PLL (HSE) + * SYSCLK(Hz) = 72000000 + * HCLK(Hz) = 72000000 + * AHB Prescaler = 1 + * APB1 Prescaler = 2 + * APB2 Prescaler = 1 + * HSE Frequency(Hz) = 8000000 + * HSE PREDIV = 1 + * PLLMUL = RCC_PLL_MUL9 (9) + * Flash Latency(WS) = 2 + * @param None + * @retval None + */ +static inline void SystemClock_Config(void) { + RCC_ClkInitTypeDef RCC_ClkInitStruct; + RCC_OscInitTypeDef RCC_OscInitStruct; + RCC_PeriphCLKInitTypeDef RCC_PeriphClkInit; + + /* Enable HSE Oscillator and activate PLL with HSE as source */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; + RCC_OscInitStruct.HSEState = RCC_HSE_ON; + RCC_OscInitStruct.HSEPredivValue = RCC_HSE_PREDIV_DIV1; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; + RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL9; + HAL_RCC_OscConfig(&RCC_OscInitStruct); + + /* Configures the USB clock */ + HAL_RCCEx_GetPeriphCLKConfig(&RCC_PeriphClkInit); + RCC_PeriphClkInit.USBClockSelection = RCC_USBCLKSOURCE_PLL_DIV1_5; + HAL_RCCEx_PeriphCLKConfig(&RCC_PeriphClkInit); + + /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 + clocks dividers */ + RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2; + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; + HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2); + + /* Enable Power Clock */ + __HAL_RCC_PWR_CLK_ENABLE(); +} + +#endif diff --git a/hw/bsp/stm32f3/boards/stm32f303disco/stm32f303disco.c b/hw/bsp/stm32f3/boards/stm32f303disco/stm32f303disco.c deleted file mode 100644 index d6a39a8e2..000000000 --- a/hw/bsp/stm32f3/boards/stm32f303disco/stm32f303disco.c +++ /dev/null @@ -1,216 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "bsp/board_api.h" -#include "stm32f3xx_hal.h" - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ - -// USB defaults to using interrupts 19, 20 and 42, however, this BSP sets the -// SYSCFG_CFGR1.USB_IT_RMP bit remapping interrupts to 74, 75 and 76. - -// FIXME: Do all three need to be handled, or just the LP one? -// USB high-priority interrupt (Channel 74): Triggered only by a correct -// transfer event for isochronous and double-buffer bulk transfer to reach -// the highest possible transfer rate. -void USB_HP_IRQHandler(void) -{ - tud_int_handler(0); -} - -// USB low-priority interrupt (Channel 75): Triggered by all USB events -// (Correct transfer, USB reset, etc.). The firmware has to check the -// interrupt source before serving the interrupt. -void USB_LP_IRQHandler(void) -{ - tud_int_handler(0); -} - -// USB wakeup interrupt (Channel 76): Triggered by the wakeup event from the USB -// Suspend mode. -void USBWakeUp_RMP_IRQHandler(void) -{ - tud_int_handler(0); -} - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM -//--------------------------------------------------------------------+ - -#define LED_PORT GPIOE -#define LED_PIN GPIO_PIN_9 -#define LED_STATE_ON 1 - -#define BUTTON_PORT GPIOA -#define BUTTON_PIN GPIO_PIN_0 -#define BUTTON_STATE_ACTIVE 1 - - -/** - * @brief System Clock Configuration - * The system Clock is configured as follow : - * System Clock source = PLL (HSE) - * SYSCLK(Hz) = 72000000 - * HCLK(Hz) = 72000000 - * AHB Prescaler = 1 - * APB1 Prescaler = 2 - * APB2 Prescaler = 1 - * HSE Frequency(Hz) = 8000000 - * HSE PREDIV = 1 - * PLLMUL = RCC_PLL_MUL9 (9) - * Flash Latency(WS) = 2 - * @param None - * @retval None - */ -static void SystemClock_Config(void) -{ - RCC_ClkInitTypeDef RCC_ClkInitStruct; - RCC_OscInitTypeDef RCC_OscInitStruct; - RCC_PeriphCLKInitTypeDef RCC_PeriphClkInit; - - /* Enable HSE Oscillator and activate PLL with HSE as source */ - RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; - RCC_OscInitStruct.HSEState = RCC_HSE_ON; - RCC_OscInitStruct.HSEPredivValue = RCC_HSE_PREDIV_DIV1; - RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; - RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; - RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL9; - HAL_RCC_OscConfig(&RCC_OscInitStruct); - - /* Configures the USB clock */ - HAL_RCCEx_GetPeriphCLKConfig(&RCC_PeriphClkInit); - RCC_PeriphClkInit.USBClockSelection = RCC_USBCLKSOURCE_PLL_DIV1_5; - HAL_RCCEx_PeriphCLKConfig(&RCC_PeriphClkInit); - - /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 - clocks dividers */ - RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); - RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; - RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; - RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2; - RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; - HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2); - - /* Enable Power Clock */ - __HAL_RCC_PWR_CLK_ENABLE(); -} - -void board_init(void) -{ - SystemClock_Config(); - - #if CFG_TUSB_OS == OPT_OS_NONE - // 1ms tick timer - SysTick_Config(SystemCoreClock / 1000); - #endif - - // Remap the USB interrupts - __HAL_RCC_SYSCFG_CLK_ENABLE(); - __HAL_REMAPINTERRUPT_USB_ENABLE(); - - // LED - __HAL_RCC_GPIOE_CLK_ENABLE(); - GPIO_InitTypeDef GPIO_InitStruct; - GPIO_InitStruct.Pin = LED_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; - GPIO_InitStruct.Pull = GPIO_PULLUP; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - HAL_GPIO_Init(LED_PORT, &GPIO_InitStruct); - - // Button - __HAL_RCC_GPIOA_CLK_ENABLE(); - GPIO_InitStruct.Pin = BUTTON_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_INPUT; - GPIO_InitStruct.Pull = GPIO_PULLDOWN; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - HAL_GPIO_Init(BUTTON_PORT, &GPIO_InitStruct); - - /* Configure USB DM and DP pins */ - __HAL_RCC_GPIOA_CLK_ENABLE(); - GPIO_InitStruct.Pin = (GPIO_PIN_11 | GPIO_PIN_12); - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - GPIO_InitStruct.Alternate = GPIO_AF14_USB; - HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); - - // Enable USB clock - __HAL_RCC_USB_CLK_ENABLE(); -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - HAL_GPIO_WritePin(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); -} - -uint32_t board_button_read(void) -{ - return BUTTON_STATE_ACTIVE == HAL_GPIO_ReadPin(BUTTON_PORT, BUTTON_PIN); -} - -int board_uart_read(uint8_t* buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -int board_uart_write(void const * buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void SysTick_Handler (void) -{ - HAL_IncTick(); - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif - -void HardFault_Handler (void) -{ - asm("bkpt"); -} - -// Required by __libc_init_array in startup code if we are compiling using -// -nostdlib/-nostartfiles. -void _init(void) -{ - -} diff --git a/hw/bsp/stm32f3/boards/stm32f303disco/stm32f3xx_hal_conf.h b/hw/bsp/stm32f3/boards/stm32f303disco/stm32f3xx_hal_conf.h deleted file mode 100644 index 82d3765af..000000000 --- a/hw/bsp/stm32f3/boards/stm32f303disco/stm32f3xx_hal_conf.h +++ /dev/null @@ -1,357 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f3xx_hal_conf.h - * @author MCD Application Team - * @brief HAL configuration file. - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2016 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F3xx_HAL_CONF_H -#define __STM32F3xx_HAL_CONF_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ - -/* ########################## Module Selection ############################## */ -/** - * @brief This is the list of modules to be used in the HAL driver - */ -#define HAL_MODULE_ENABLED -/* #define HAL_ADC_MODULE_ENABLED */ -/* #define HAL_CAN_MODULE_ENABLED */ -/* #define HAL_CAN_LEGACY_MODULE_ENABLED */ -/* #define HAL_CEC_MODULE_ENABLED */ -/* #define HAL_COMP_MODULE_ENABLED */ -#define HAL_CORTEX_MODULE_ENABLED -/* #define HAL_CRC_MODULE_ENABLED */ -/* #define HAL_DAC_MODULE_ENABLED */ -#define HAL_DMA_MODULE_ENABLED -#define HAL_FLASH_MODULE_ENABLED -/* #define HAL_SRAM_MODULE_ENABLED */ -/* #define HAL_NOR_MODULE_ENABLED */ -/* #define HAL_NAND_MODULE_ENABLED */ -/* #define HAL_PCCARD_MODULE_ENABLED */ -#define HAL_GPIO_MODULE_ENABLED -/* #define HAL_EXTI_MODULE_ENABLED */ -/* #define HAL_HRTIM_MODULE_ENABLED */ -/* #define HAL_I2C_MODULE_ENABLED */ -/* #define HAL_I2S_MODULE_ENABLED */ -/* #define HAL_IRDA_MODULE_ENABLED */ -/* #define HAL_IWDG_MODULE_ENABLED */ -/* #define HAL_OPAMP_MODULE_ENABLED */ -/* #define HAL_PCD_MODULE_ENABLED */ -/* #define HAL_PWR_MODULE_ENABLED */ -#define HAL_RCC_MODULE_ENABLED -/* #define HAL_RTC_MODULE_ENABLED */ -/* #define HAL_SDADC_MODULE_ENABLED */ -/* #define HAL_SMARTCARD_MODULE_ENABLED */ -/* #define HAL_SMBUS_MODULE_ENABLED */ -/* #define HAL_SPI_MODULE_ENABLED */ -/* #define HAL_TIM_MODULE_ENABLED */ -/* #define HAL_TSC_MODULE_ENABLED */ -#define HAL_UART_MODULE_ENABLED -/* #define HAL_USART_MODULE_ENABLED */ -/* #define HAL_WWDG_MODULE_ENABLED */ - -/* ########################## HSE/HSI Values adaptation ##################### */ -/** - * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). - */ -#if !defined (HSE_VALUE) - #define HSE_VALUE (8000000U) /*!< Value of the External oscillator in Hz */ -#endif /* HSE_VALUE */ - -/** - * @brief In the following line adjust the External High Speed oscillator (HSE) Startup - * Timeout value - */ -#if !defined (HSE_STARTUP_TIMEOUT) - #define HSE_STARTUP_TIMEOUT (100U) /*!< Time out for HSE start up, in ms */ -#endif /* HSE_STARTUP_TIMEOUT */ - -/** - * @brief Internal High Speed oscillator (HSI) value. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). - */ -#if !defined (HSI_VALUE) - #define HSI_VALUE (8000000U) /*!< Value of the Internal oscillator in Hz*/ -#endif /* HSI_VALUE */ - -/** - * @brief In the following line adjust the Internal High Speed oscillator (HSI) Startup - * Timeout value - */ -#if !defined (HSI_STARTUP_TIMEOUT) - #define HSI_STARTUP_TIMEOUT (5000U) /*!< Time out for HSI start up */ -#endif /* HSI_STARTUP_TIMEOUT */ - -/** - * @brief Internal Low Speed oscillator (LSI) value. - */ -#if !defined (LSI_VALUE) - #define LSI_VALUE (40000U) -#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz - The real value may vary depending on the variations - in voltage and temperature. */ -/** - * @brief External Low Speed oscillator (LSE) value. - */ -#if !defined (LSE_VALUE) - #define LSE_VALUE (32768U) /*!< Value of the External Low Speed oscillator in Hz */ -#endif /* LSE_VALUE */ - -/** - * @brief Time out for LSE start up value in ms. - */ -#if !defined (LSE_STARTUP_TIMEOUT) - #define LSE_STARTUP_TIMEOUT (5000U) /*!< Time out for LSE start up, in ms */ -#endif /* LSE_STARTUP_TIMEOUT */ - -/** - * @brief External clock source for I2S peripheral - * This value is used by the I2S HAL module to compute the I2S clock source - * frequency, this source is inserted directly through I2S_CKIN pad. - * - External clock generated through external PLL component on EVAL 303 (based on MCO or crystal) - * - External clock not generated on EVAL 373 - */ -#if !defined (EXTERNAL_CLOCK_VALUE) - #define EXTERNAL_CLOCK_VALUE (8000000U) /*!< Value of the External oscillator in Hz*/ -#endif /* EXTERNAL_CLOCK_VALUE */ - -/* Tip: To avoid modifying this file each time you need to use different HSE, - === you can define the HSE value in your toolchain compiler preprocessor. */ - -/* ########################### System Configuration ######################### */ -/** - * @brief This is the HAL system configuration section - */ -#define VDD_VALUE (3300U) /*!< Value of VDD in mv */ -#define TICK_INT_PRIORITY ((uint32_t)(1U<<__NVIC_PRIO_BITS) - 1U) /*!< tick interrupt priority (lowest by default) */ -#define USE_RTOS 0U -#define PREFETCH_ENABLE 1U -#define INSTRUCTION_CACHE_ENABLE 0U -#define DATA_CACHE_ENABLE 0U -#define USE_SPI_CRC 1U - -#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ -#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */ -#define USE_HAL_COMP_REGISTER_CALLBACKS 0U /* COMP register callback disabled */ -#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ -#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ -#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ -#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ -#define USE_HAL_SDADC_REGISTER_CALLBACKS 0U /* SDADC register callback disabled */ -#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ -#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ -#define USE_HAL_PCCARD_REGISTER_CALLBACKS 0U /* PCCARD register callback disabled */ -#define USE_HAL_HRTIM_REGISTER_CALLBACKS 0U /* HRTIM register callback disabled */ -#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ -#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ -#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ -#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */ -#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */ -#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ -#define USE_HAL_OPAMP_REGISTER_CALLBACKS 0U /* OPAMP register callback disabled */ -#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ -#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ -#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ -#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ -#define USE_HAL_TSC_REGISTER_CALLBACKS 0U /* TSC register callback disabled */ -#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ - -/* ########################## Assert Selection ############################## */ -/** - * @brief Uncomment the line below to expanse the "assert_param" macro in the - * HAL drivers code - */ -/*#define USE_FULL_ASSERT 1U*/ - -/* Includes ------------------------------------------------------------------*/ -/** - * @brief Include module's header file - */ - -#ifdef HAL_RCC_MODULE_ENABLED - #include "stm32f3xx_hal_rcc.h" -#endif /* HAL_RCC_MODULE_ENABLED */ - -#ifdef HAL_GPIO_MODULE_ENABLED - #include "stm32f3xx_hal_gpio.h" -#endif /* HAL_GPIO_MODULE_ENABLED */ - -#ifdef HAL_EXTI_MODULE_ENABLED - #include "stm32f3xx_hal_exti.h" -#endif /* HAL_EXTI_MODULE_ENABLED */ - -#ifdef HAL_DMA_MODULE_ENABLED - #include "stm32f3xx_hal_dma.h" -#endif /* HAL_DMA_MODULE_ENABLED */ - -#ifdef HAL_CORTEX_MODULE_ENABLED - #include "stm32f3xx_hal_cortex.h" -#endif /* HAL_CORTEX_MODULE_ENABLED */ - -#ifdef HAL_ADC_MODULE_ENABLED - #include "stm32f3xx_hal_adc.h" -#endif /* HAL_ADC_MODULE_ENABLED */ - -#ifdef HAL_CAN_MODULE_ENABLED - #include "stm32f3xx_hal_can.h" -#endif /* HAL_CAN_MODULE_ENABLED */ - -#ifdef HAL_CAN_LEGACY_MODULE_ENABLED - #include "stm32f3xx_hal_can_legacy.h" -#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */ - -#ifdef HAL_CEC_MODULE_ENABLED - #include "stm32f3xx_hal_cec.h" -#endif /* HAL_CEC_MODULE_ENABLED */ - -#ifdef HAL_COMP_MODULE_ENABLED - #include "stm32f3xx_hal_comp.h" -#endif /* HAL_COMP_MODULE_ENABLED */ - -#ifdef HAL_CRC_MODULE_ENABLED - #include "stm32f3xx_hal_crc.h" -#endif /* HAL_CRC_MODULE_ENABLED */ - -#ifdef HAL_DAC_MODULE_ENABLED - #include "stm32f3xx_hal_dac.h" -#endif /* HAL_DAC_MODULE_ENABLED */ - -#ifdef HAL_FLASH_MODULE_ENABLED - #include "stm32f3xx_hal_flash.h" -#endif /* HAL_FLASH_MODULE_ENABLED */ - -#ifdef HAL_SRAM_MODULE_ENABLED - #include "stm32f3xx_hal_sram.h" -#endif /* HAL_SRAM_MODULE_ENABLED */ - -#ifdef HAL_NOR_MODULE_ENABLED - #include "stm32f3xx_hal_nor.h" -#endif /* HAL_NOR_MODULE_ENABLED */ - -#ifdef HAL_NAND_MODULE_ENABLED - #include "stm32f3xx_hal_nand.h" -#endif /* HAL_NAND_MODULE_ENABLED */ - -#ifdef HAL_PCCARD_MODULE_ENABLED - #include "stm32f3xx_hal_pccard.h" -#endif /* HAL_PCCARD_MODULE_ENABLED */ - -#ifdef HAL_HRTIM_MODULE_ENABLED - #include "stm32f3xx_hal_hrtim.h" -#endif /* HAL_HRTIM_MODULE_ENABLED */ - -#ifdef HAL_I2C_MODULE_ENABLED - #include "stm32f3xx_hal_i2c.h" -#endif /* HAL_I2C_MODULE_ENABLED */ - -#ifdef HAL_I2S_MODULE_ENABLED - #include "stm32f3xx_hal_i2s.h" -#endif /* HAL_I2S_MODULE_ENABLED */ - -#ifdef HAL_IRDA_MODULE_ENABLED - #include "stm32f3xx_hal_irda.h" -#endif /* HAL_IRDA_MODULE_ENABLED */ - -#ifdef HAL_IWDG_MODULE_ENABLED - #include "stm32f3xx_hal_iwdg.h" -#endif /* HAL_IWDG_MODULE_ENABLED */ - -#ifdef HAL_OPAMP_MODULE_ENABLED - #include "stm32f3xx_hal_opamp.h" -#endif /* HAL_OPAMP_MODULE_ENABLED */ - -#ifdef HAL_PCD_MODULE_ENABLED - #include "stm32f3xx_hal_pcd.h" -#endif /* HAL_PCD_MODULE_ENABLED */ - -#ifdef HAL_PWR_MODULE_ENABLED - #include "stm32f3xx_hal_pwr.h" -#endif /* HAL_PWR_MODULE_ENABLED */ - -#ifdef HAL_RTC_MODULE_ENABLED - #include "stm32f3xx_hal_rtc.h" -#endif /* HAL_RTC_MODULE_ENABLED */ - -#ifdef HAL_SDADC_MODULE_ENABLED - #include "stm32f3xx_hal_sdadc.h" -#endif /* HAL_SDADC_MODULE_ENABLED */ - -#ifdef HAL_SMARTCARD_MODULE_ENABLED - #include "stm32f3xx_hal_smartcard.h" -#endif /* HAL_SMARTCARD_MODULE_ENABLED */ - -#ifdef HAL_SMBUS_MODULE_ENABLED - #include "stm32f3xx_hal_smbus.h" -#endif /* HAL_SMBUS_MODULE_ENABLED */ - -#ifdef HAL_SPI_MODULE_ENABLED - #include "stm32f3xx_hal_spi.h" -#endif /* HAL_SPI_MODULE_ENABLED */ - -#ifdef HAL_TIM_MODULE_ENABLED - #include "stm32f3xx_hal_tim.h" -#endif /* HAL_TIM_MODULE_ENABLED */ - -#ifdef HAL_TSC_MODULE_ENABLED - #include "stm32f3xx_hal_tsc.h" -#endif /* HAL_TSC_MODULE_ENABLED */ - -#ifdef HAL_UART_MODULE_ENABLED - #include "stm32f3xx_hal_uart.h" -#endif /* HAL_UART_MODULE_ENABLED */ - -#ifdef HAL_USART_MODULE_ENABLED - #include "stm32f3xx_hal_usart.h" -#endif /* HAL_USART_MODULE_ENABLED */ - -#ifdef HAL_WWDG_MODULE_ENABLED - #include "stm32f3xx_hal_wwdg.h" -#endif /* HAL_WWDG_MODULE_ENABLED */ - -/* Exported macro ------------------------------------------------------------*/ -#ifdef USE_FULL_ASSERT -/** - * @brief The assert_param macro is used for function's parameters check. - * @param expr If expr is false, it calls assert_failed function - * which reports the name of the source file and the source - * line number of the call that failed. - * If expr is true, it returns no value. - * @retval None - */ - #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) -/* Exported functions ------------------------------------------------------- */ - void assert_failed(uint8_t* file, uint32_t line); -#else - #define assert_param(expr) ((void)0U) -#endif /* USE_FULL_ASSERT */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F3xx_HAL_CONF_H */ - - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/hw/bsp/stm32f3/family.c b/hw/bsp/stm32f3/family.c new file mode 100644 index 000000000..7c194a694 --- /dev/null +++ b/hw/bsp/stm32f3/family.c @@ -0,0 +1,152 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "stm32f3xx_hal.h" +#include "bsp/board_api.h" +#include "board.h" + +//--------------------------------------------------------------------+ +// Forward USB interrupt events to TinyUSB IRQ Handler +//--------------------------------------------------------------------+ + +// USB defaults to using interrupts 19, 20 and 42, however, this BSP sets the +// SYSCFG_CFGR1.USB_IT_RMP bit remapping interrupts to 74, 75 and 76. + +// FIXME: Do all three need to be handled, or just the LP one? +// USB high-priority interrupt (Channel 74): Triggered only by a correct +// transfer event for isochronous and double-buffer bulk transfer to reach +// the highest possible transfer rate. +void USB_HP_IRQHandler(void) { + tud_int_handler(0); +} + +// USB low-priority interrupt (Channel 75): Triggered by all USB events +// (Correct transfer, USB reset, etc.). The firmware has to check the +// interrupt source before serving the interrupt. +void USB_LP_IRQHandler(void) { + tud_int_handler(0); +} + +// USB wakeup interrupt (Channel 76): Triggered by the wakeup event from the USB +// Suspend mode. +void USBWakeUp_RMP_IRQHandler(void) { + tud_int_handler(0); +} + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM +//--------------------------------------------------------------------+ + + +void board_init(void) { + SystemClock_Config(); + + #if CFG_TUSB_OS == OPT_OS_NONE + // 1ms tick timer + SysTick_Config(SystemCoreClock / 1000); + #endif + + // Remap the USB interrupts + __HAL_RCC_SYSCFG_CLK_ENABLE(); + __HAL_REMAPINTERRUPT_USB_ENABLE(); + + // LED + __HAL_RCC_GPIOE_CLK_ENABLE(); + GPIO_InitTypeDef GPIO_InitStruct; + GPIO_InitStruct.Pin = LED_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; + GPIO_InitStruct.Pull = GPIO_PULLUP; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + HAL_GPIO_Init(LED_PORT, &GPIO_InitStruct); + + // Button + __HAL_RCC_GPIOA_CLK_ENABLE(); + GPIO_InitStruct.Pin = BUTTON_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_INPUT; + GPIO_InitStruct.Pull = GPIO_PULLDOWN; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + HAL_GPIO_Init(BUTTON_PORT, &GPIO_InitStruct); + + /* Configure USB DM and DP pins */ + __HAL_RCC_GPIOA_CLK_ENABLE(); + GPIO_InitStruct.Pin = (GPIO_PIN_11 | GPIO_PIN_12); + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF14_USB; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + // Enable USB clock + __HAL_RCC_USB_CLK_ENABLE(); +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) { + HAL_GPIO_WritePin(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1 - LED_STATE_ON)); +} + +uint32_t board_button_read(void) { + return BUTTON_STATE_ACTIVE == HAL_GPIO_ReadPin(BUTTON_PORT, BUTTON_PIN); +} + +int board_uart_read(uint8_t* buf, int len) { + (void) buf; + (void) len; + return 0; +} + +int board_uart_write(void const* buf, int len) { + (void) buf; + (void) len; + return 0; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; + +void SysTick_Handler(void) { + HAL_IncTick(); + system_ticks++; +} + +uint32_t board_millis(void) { + return system_ticks; +} + +#endif + +void HardFault_Handler(void) { + asm("bkpt"); +} + +// Required by __libc_init_array in startup code if we are compiling using +// -nostdlib/-nostartfiles. +void _init(void) { + +} diff --git a/hw/bsp/stm32f3/family.cmake b/hw/bsp/stm32f3/family.cmake new file mode 100644 index 000000000..0a28e480b --- /dev/null +++ b/hw/bsp/stm32f3/family.cmake @@ -0,0 +1,110 @@ +include_guard() + +set(ST_FAMILY f3) +set(ST_PREFIX stm32${ST_FAMILY}xx) + +set(ST_HAL_DRIVER ${TOP}/hw/mcu/st/stm32${ST_FAMILY}xx_hal_driver) +set(ST_CMSIS ${TOP}/hw/mcu/st/cmsis_device_${ST_FAMILY}) +set(CMSIS_5 ${TOP}/lib/CMSIS_5) + +# include board specific +include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) + +# toolchain set up +set(CMAKE_SYSTEM_PROCESSOR cortex-m3 CACHE INTERNAL "System Processor") +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) + +set(FAMILY_MCUS STM32F3 CACHE INTERNAL "") + + +#------------------------------------ +# BOARD_TARGET +#------------------------------------ +# only need to be built ONCE for all examples +function(add_board_target BOARD_TARGET) + if (NOT TARGET ${BOARD_TARGET}) + # Startup & Linker script + set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s) + set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) + set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s) + + set(LD_FILE_Clang ${LD_FILE_GNU}) + set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf) + + add_library(${BOARD_TARGET} STATIC + ${ST_CMSIS}/Source/Templates/system_${ST_PREFIX}.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_cortex.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc_ex.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_gpio.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} + ) + target_include_directories(${BOARD_TARGET} PUBLIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${CMSIS_5}/CMSIS/Core/Include + ${ST_CMSIS}/Include + ${ST_HAL_DRIVER}/Inc + ) + #target_compile_options(${BOARD_TARGET} PUBLIC) + #target_compile_definitions(${BOARD_TARGET} PUBLIC) + + update_board(${BOARD_TARGET}) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -nostartfiles + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_Clang}" + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () + endif () +endfunction() + + +#------------------------------------ +# Functions +#------------------------------------ +function(family_configure_example TARGET RTOS) + family_configure_common(${TARGET} ${RTOS}) + + # Board target + add_board_target(board_${BOARD}) + + #---------- Port Specific ---------- + # These files are built for each example since it depends on example's tusb_config.h + target_sources(${TARGET} PUBLIC + # BSP + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ) + target_include_directories(${TARGET} PUBLIC + # family, hw, board + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} + ) + + # Add TinyUSB target and port source + family_add_tinyusb(${TARGET} OPT_MCU_STM32F3 ${RTOS}) + target_sources(${TARGET}-tinyusb PUBLIC + ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c + ) + target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + + # Link dependencies + target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) + + # Flashing + family_flash_stlink(${TARGET}) + family_flash_jlink(${TARGET}) +endfunction() diff --git a/hw/bsp/stm32f3/stm32f3xx_hal_conf.h b/hw/bsp/stm32f3/stm32f3xx_hal_conf.h new file mode 100644 index 000000000..82d3765af --- /dev/null +++ b/hw/bsp/stm32f3/stm32f3xx_hal_conf.h @@ -0,0 +1,357 @@ +/** + ****************************************************************************** + * @file stm32f3xx_hal_conf.h + * @author MCD Application Team + * @brief HAL configuration file. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2016 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F3xx_HAL_CONF_H +#define __STM32F3xx_HAL_CONF_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/* ########################## Module Selection ############################## */ +/** + * @brief This is the list of modules to be used in the HAL driver + */ +#define HAL_MODULE_ENABLED +/* #define HAL_ADC_MODULE_ENABLED */ +/* #define HAL_CAN_MODULE_ENABLED */ +/* #define HAL_CAN_LEGACY_MODULE_ENABLED */ +/* #define HAL_CEC_MODULE_ENABLED */ +/* #define HAL_COMP_MODULE_ENABLED */ +#define HAL_CORTEX_MODULE_ENABLED +/* #define HAL_CRC_MODULE_ENABLED */ +/* #define HAL_DAC_MODULE_ENABLED */ +#define HAL_DMA_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED +/* #define HAL_SRAM_MODULE_ENABLED */ +/* #define HAL_NOR_MODULE_ENABLED */ +/* #define HAL_NAND_MODULE_ENABLED */ +/* #define HAL_PCCARD_MODULE_ENABLED */ +#define HAL_GPIO_MODULE_ENABLED +/* #define HAL_EXTI_MODULE_ENABLED */ +/* #define HAL_HRTIM_MODULE_ENABLED */ +/* #define HAL_I2C_MODULE_ENABLED */ +/* #define HAL_I2S_MODULE_ENABLED */ +/* #define HAL_IRDA_MODULE_ENABLED */ +/* #define HAL_IWDG_MODULE_ENABLED */ +/* #define HAL_OPAMP_MODULE_ENABLED */ +/* #define HAL_PCD_MODULE_ENABLED */ +/* #define HAL_PWR_MODULE_ENABLED */ +#define HAL_RCC_MODULE_ENABLED +/* #define HAL_RTC_MODULE_ENABLED */ +/* #define HAL_SDADC_MODULE_ENABLED */ +/* #define HAL_SMARTCARD_MODULE_ENABLED */ +/* #define HAL_SMBUS_MODULE_ENABLED */ +/* #define HAL_SPI_MODULE_ENABLED */ +/* #define HAL_TIM_MODULE_ENABLED */ +/* #define HAL_TSC_MODULE_ENABLED */ +#define HAL_UART_MODULE_ENABLED +/* #define HAL_USART_MODULE_ENABLED */ +/* #define HAL_WWDG_MODULE_ENABLED */ + +/* ########################## HSE/HSI Values adaptation ##################### */ +/** + * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSE is used as system clock source, directly or through the PLL). + */ +#if !defined (HSE_VALUE) + #define HSE_VALUE (8000000U) /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +/** + * @brief In the following line adjust the External High Speed oscillator (HSE) Startup + * Timeout value + */ +#if !defined (HSE_STARTUP_TIMEOUT) + #define HSE_STARTUP_TIMEOUT (100U) /*!< Time out for HSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief Internal High Speed oscillator (HSI) value. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSI is used as system clock source, directly or through the PLL). + */ +#if !defined (HSI_VALUE) + #define HSI_VALUE (8000000U) /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +/** + * @brief In the following line adjust the Internal High Speed oscillator (HSI) Startup + * Timeout value + */ +#if !defined (HSI_STARTUP_TIMEOUT) + #define HSI_STARTUP_TIMEOUT (5000U) /*!< Time out for HSI start up */ +#endif /* HSI_STARTUP_TIMEOUT */ + +/** + * @brief Internal Low Speed oscillator (LSI) value. + */ +#if !defined (LSI_VALUE) + #define LSI_VALUE (40000U) +#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz + The real value may vary depending on the variations + in voltage and temperature. */ +/** + * @brief External Low Speed oscillator (LSE) value. + */ +#if !defined (LSE_VALUE) + #define LSE_VALUE (32768U) /*!< Value of the External Low Speed oscillator in Hz */ +#endif /* LSE_VALUE */ + +/** + * @brief Time out for LSE start up value in ms. + */ +#if !defined (LSE_STARTUP_TIMEOUT) + #define LSE_STARTUP_TIMEOUT (5000U) /*!< Time out for LSE start up, in ms */ +#endif /* LSE_STARTUP_TIMEOUT */ + +/** + * @brief External clock source for I2S peripheral + * This value is used by the I2S HAL module to compute the I2S clock source + * frequency, this source is inserted directly through I2S_CKIN pad. + * - External clock generated through external PLL component on EVAL 303 (based on MCO or crystal) + * - External clock not generated on EVAL 373 + */ +#if !defined (EXTERNAL_CLOCK_VALUE) + #define EXTERNAL_CLOCK_VALUE (8000000U) /*!< Value of the External oscillator in Hz*/ +#endif /* EXTERNAL_CLOCK_VALUE */ + +/* Tip: To avoid modifying this file each time you need to use different HSE, + === you can define the HSE value in your toolchain compiler preprocessor. */ + +/* ########################### System Configuration ######################### */ +/** + * @brief This is the HAL system configuration section + */ +#define VDD_VALUE (3300U) /*!< Value of VDD in mv */ +#define TICK_INT_PRIORITY ((uint32_t)(1U<<__NVIC_PRIO_BITS) - 1U) /*!< tick interrupt priority (lowest by default) */ +#define USE_RTOS 0U +#define PREFETCH_ENABLE 1U +#define INSTRUCTION_CACHE_ENABLE 0U +#define DATA_CACHE_ENABLE 0U +#define USE_SPI_CRC 1U + +#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ +#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */ +#define USE_HAL_COMP_REGISTER_CALLBACKS 0U /* COMP register callback disabled */ +#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ +#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ +#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ +#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ +#define USE_HAL_SDADC_REGISTER_CALLBACKS 0U /* SDADC register callback disabled */ +#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ +#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ +#define USE_HAL_PCCARD_REGISTER_CALLBACKS 0U /* PCCARD register callback disabled */ +#define USE_HAL_HRTIM_REGISTER_CALLBACKS 0U /* HRTIM register callback disabled */ +#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ +#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ +#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ +#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */ +#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */ +#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ +#define USE_HAL_OPAMP_REGISTER_CALLBACKS 0U /* OPAMP register callback disabled */ +#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ +#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ +#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ +#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ +#define USE_HAL_TSC_REGISTER_CALLBACKS 0U /* TSC register callback disabled */ +#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ + +/* ########################## Assert Selection ############################## */ +/** + * @brief Uncomment the line below to expanse the "assert_param" macro in the + * HAL drivers code + */ +/*#define USE_FULL_ASSERT 1U*/ + +/* Includes ------------------------------------------------------------------*/ +/** + * @brief Include module's header file + */ + +#ifdef HAL_RCC_MODULE_ENABLED + #include "stm32f3xx_hal_rcc.h" +#endif /* HAL_RCC_MODULE_ENABLED */ + +#ifdef HAL_GPIO_MODULE_ENABLED + #include "stm32f3xx_hal_gpio.h" +#endif /* HAL_GPIO_MODULE_ENABLED */ + +#ifdef HAL_EXTI_MODULE_ENABLED + #include "stm32f3xx_hal_exti.h" +#endif /* HAL_EXTI_MODULE_ENABLED */ + +#ifdef HAL_DMA_MODULE_ENABLED + #include "stm32f3xx_hal_dma.h" +#endif /* HAL_DMA_MODULE_ENABLED */ + +#ifdef HAL_CORTEX_MODULE_ENABLED + #include "stm32f3xx_hal_cortex.h" +#endif /* HAL_CORTEX_MODULE_ENABLED */ + +#ifdef HAL_ADC_MODULE_ENABLED + #include "stm32f3xx_hal_adc.h" +#endif /* HAL_ADC_MODULE_ENABLED */ + +#ifdef HAL_CAN_MODULE_ENABLED + #include "stm32f3xx_hal_can.h" +#endif /* HAL_CAN_MODULE_ENABLED */ + +#ifdef HAL_CAN_LEGACY_MODULE_ENABLED + #include "stm32f3xx_hal_can_legacy.h" +#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */ + +#ifdef HAL_CEC_MODULE_ENABLED + #include "stm32f3xx_hal_cec.h" +#endif /* HAL_CEC_MODULE_ENABLED */ + +#ifdef HAL_COMP_MODULE_ENABLED + #include "stm32f3xx_hal_comp.h" +#endif /* HAL_COMP_MODULE_ENABLED */ + +#ifdef HAL_CRC_MODULE_ENABLED + #include "stm32f3xx_hal_crc.h" +#endif /* HAL_CRC_MODULE_ENABLED */ + +#ifdef HAL_DAC_MODULE_ENABLED + #include "stm32f3xx_hal_dac.h" +#endif /* HAL_DAC_MODULE_ENABLED */ + +#ifdef HAL_FLASH_MODULE_ENABLED + #include "stm32f3xx_hal_flash.h" +#endif /* HAL_FLASH_MODULE_ENABLED */ + +#ifdef HAL_SRAM_MODULE_ENABLED + #include "stm32f3xx_hal_sram.h" +#endif /* HAL_SRAM_MODULE_ENABLED */ + +#ifdef HAL_NOR_MODULE_ENABLED + #include "stm32f3xx_hal_nor.h" +#endif /* HAL_NOR_MODULE_ENABLED */ + +#ifdef HAL_NAND_MODULE_ENABLED + #include "stm32f3xx_hal_nand.h" +#endif /* HAL_NAND_MODULE_ENABLED */ + +#ifdef HAL_PCCARD_MODULE_ENABLED + #include "stm32f3xx_hal_pccard.h" +#endif /* HAL_PCCARD_MODULE_ENABLED */ + +#ifdef HAL_HRTIM_MODULE_ENABLED + #include "stm32f3xx_hal_hrtim.h" +#endif /* HAL_HRTIM_MODULE_ENABLED */ + +#ifdef HAL_I2C_MODULE_ENABLED + #include "stm32f3xx_hal_i2c.h" +#endif /* HAL_I2C_MODULE_ENABLED */ + +#ifdef HAL_I2S_MODULE_ENABLED + #include "stm32f3xx_hal_i2s.h" +#endif /* HAL_I2S_MODULE_ENABLED */ + +#ifdef HAL_IRDA_MODULE_ENABLED + #include "stm32f3xx_hal_irda.h" +#endif /* HAL_IRDA_MODULE_ENABLED */ + +#ifdef HAL_IWDG_MODULE_ENABLED + #include "stm32f3xx_hal_iwdg.h" +#endif /* HAL_IWDG_MODULE_ENABLED */ + +#ifdef HAL_OPAMP_MODULE_ENABLED + #include "stm32f3xx_hal_opamp.h" +#endif /* HAL_OPAMP_MODULE_ENABLED */ + +#ifdef HAL_PCD_MODULE_ENABLED + #include "stm32f3xx_hal_pcd.h" +#endif /* HAL_PCD_MODULE_ENABLED */ + +#ifdef HAL_PWR_MODULE_ENABLED + #include "stm32f3xx_hal_pwr.h" +#endif /* HAL_PWR_MODULE_ENABLED */ + +#ifdef HAL_RTC_MODULE_ENABLED + #include "stm32f3xx_hal_rtc.h" +#endif /* HAL_RTC_MODULE_ENABLED */ + +#ifdef HAL_SDADC_MODULE_ENABLED + #include "stm32f3xx_hal_sdadc.h" +#endif /* HAL_SDADC_MODULE_ENABLED */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED + #include "stm32f3xx_hal_smartcard.h" +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ + +#ifdef HAL_SMBUS_MODULE_ENABLED + #include "stm32f3xx_hal_smbus.h" +#endif /* HAL_SMBUS_MODULE_ENABLED */ + +#ifdef HAL_SPI_MODULE_ENABLED + #include "stm32f3xx_hal_spi.h" +#endif /* HAL_SPI_MODULE_ENABLED */ + +#ifdef HAL_TIM_MODULE_ENABLED + #include "stm32f3xx_hal_tim.h" +#endif /* HAL_TIM_MODULE_ENABLED */ + +#ifdef HAL_TSC_MODULE_ENABLED + #include "stm32f3xx_hal_tsc.h" +#endif /* HAL_TSC_MODULE_ENABLED */ + +#ifdef HAL_UART_MODULE_ENABLED + #include "stm32f3xx_hal_uart.h" +#endif /* HAL_UART_MODULE_ENABLED */ + +#ifdef HAL_USART_MODULE_ENABLED + #include "stm32f3xx_hal_usart.h" +#endif /* HAL_USART_MODULE_ENABLED */ + +#ifdef HAL_WWDG_MODULE_ENABLED + #include "stm32f3xx_hal_wwdg.h" +#endif /* HAL_WWDG_MODULE_ENABLED */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ + #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ + void assert_failed(uint8_t* file, uint32_t line); +#else + #define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F3xx_HAL_CONF_H */ + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/src/portable/synopsys/dwc2/dcd_dwc2.c b/src/portable/synopsys/dwc2/dcd_dwc2.c index f17d30f06..c2c09a1fc 100644 --- a/src/portable/synopsys/dwc2/dcd_dwc2.c +++ b/src/portable/synopsys/dwc2/dcd_dwc2.c @@ -440,11 +440,15 @@ static void reset_core(dwc2_regs_t* dwc2) { } static bool phy_hs_supported(dwc2_regs_t* dwc2) { - // note: esp32 incorrect report its hs_phy_type as utmi + (void) dwc2; + #if TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3) + // note: esp32 incorrect report its hs_phy_type as utmi + return false; +#elif !TUD_OPT_HIGH_SPEED return false; #else - return TUD_OPT_HIGH_SPEED && dwc2->ghwcfg2_bm.hs_phy_type != HS_PHY_TYPE_NONE; + return dwc2->ghwcfg2_bm.hs_phy_type != HS_PHY_TYPE_NONE; #endif } -- cgit v1.3.1 From 16e099a9f946661ad7924b95b1345d7e1bf9dc69 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 23 Apr 2024 12:38:55 +0700 Subject: integrate msp430 to build cmake --- .github/workflows/build_cmake.yml | 292 +++++++++++++++++++++++++++++++++++++ .github/workflows/build_msp430.yml | 71 --------- .github/workflows/cmake_arm.yml | 248 ------------------------------- 3 files changed, 292 insertions(+), 319 deletions(-) create mode 100644 .github/workflows/build_cmake.yml delete mode 100644 .github/workflows/build_msp430.yml delete mode 100644 .github/workflows/cmake_arm.yml (limited to '.github/workflows') diff --git a/.github/workflows/build_cmake.yml b/.github/workflows/build_cmake.yml new file mode 100644 index 000000000..ee6d83992 --- /dev/null +++ b/.github/workflows/build_cmake.yml @@ -0,0 +1,292 @@ +name: Build CMake + +on: + workflow_dispatch: + push: + paths: + - 'src/**' + - 'examples/**' + - 'lib/**' + - 'hw/**' + - 'test/hil/**' + - 'tools/get_deps.py' + - '.github/workflows/build_cmake.yml' + pull_request: + branches: [ master ] + paths: + - 'src/**' + - 'examples/**' + - 'lib/**' + - 'hw/**' + - 'test/hil/**' + - 'tools/get_deps.py' + - '.github/workflows/build_cmake.yml' + +concurrency: + group: ${{ github.workflow }}-${{ github.head_ref || github.run_id }} + cancel-in-progress: true + +jobs: + # --------------------------------------- + # Build ARM with GCC + # --------------------------------------- + arm-gcc: + runs-on: ubuntu-latest + strategy: + fail-fast: false + matrix: + family: + # Alphabetical order + - 'imxrt' + - 'kinetis_k kinetis_kl' + - 'lpc17 lpc18 lpc40 lpc43' + - 'lpc54 lpc55' + - 'mcx' + - 'nrf' + - 'ra' + - 'rp2040' + - 'samd21' + - 'samd51' + - 'stm32f0' + - 'stm32f1' + - 'stm32f2' + - 'stm32f3' + - 'stm32f4' + - 'stm32f7' + - 'stm32g0' + - 'stm32g4' + - 'stm32h5' + - 'stm32h7' + - 'stm32l4' + - 'stm32u5' + steps: + - name: Setup Python + uses: actions/setup-python@v5 + with: + python-version: '3.x' + + - name: Install ARM GCC + uses: carlosperate/arm-none-eabi-gcc-action@v1 + with: + release: '12.3.Rel1' + + - name: Checkout TinyUSB + uses: actions/checkout@v4 + + - name: Checkout pico-sdk for rp2040 + if: matrix.family == 'rp2040' + uses: actions/checkout@v4 + with: + repository: raspberrypi/pico-sdk + ref: develop + path: pico-sdk + + - name: Get Dependencies + run: | + sudo apt install -y ninja-build + python3 tools/get_deps.py ${{ matrix.family }} + + - name: Build + run: python tools/build_cmake.py ${{ matrix.family }} -DCMAKE_BUILD_TYPE=MinSizeRel + env: + PICO_SDK_PATH: ${{ github.workspace }}/pico-sdk + + - name: Upload Artifacts for Hardware Testing (rp2040) + if: matrix.family == 'rp2040' && github.repository_owner == 'hathach' + uses: actions/upload-artifact@v4 + with: + name: raspberry_pi_pico + path: | + cmake-build/cmake-build-raspberry_pi_pico/*/*/*.elf + + - name: Upload Artifacts for Hardware Testing (nRF) + if: matrix.family == 'nrf' && github.repository_owner == 'hathach' + uses: actions/upload-artifact@v4 + with: + name: feather_nrf52840_express + path: | + cmake-build/cmake-build-feather_nrf52840_express/*/*/*.elf + + - name: Upload Artifacts for Hardware Testing (samd51) + if: matrix.family == 'samd51' && github.repository_owner == 'hathach' + uses: actions/upload-artifact@v4 + with: + name: itsybitsy_m4 + path: | + cmake-build/cmake-build-itsybitsy_m4/*/*/*.bin + + # --------------------------------------- + # Build ARM with Clang + # --------------------------------------- + arm-clang: + runs-on: ubuntu-latest + strategy: + fail-fast: false + matrix: + family: + # Alphabetical order + - 'imxrt' + - 'kinetis_k kinetis_kl' + - 'lpc17 lpc18 lpc40 lpc43' + - 'lpc54 lpc55' + #- 'mcx' not working with gcc anymore, need to fix this first + - 'nrf' + #- 'ra' port later + - 'rp2040' + - 'samd21' + - 'samd51' + - 'stm32f0' + - 'stm32f1' + - 'stm32f2' + - 'stm32f3' + - 'stm32f4' + - 'stm32f7' + - 'stm32g0' + - 'stm32g4' + - 'stm32h5' + - 'stm32h7' + - 'stm32l4' + - 'stm32u5' + steps: + - name: Setup Python + uses: actions/setup-python@v5 + with: + python-version: '3.x' + + - name: Checkout TinyUSB + uses: actions/checkout@v4 + + - name: Checkout pico-sdk for rp2040 + if: matrix.family == 'rp2040' + uses: actions/checkout@v4 + with: + repository: raspberrypi/pico-sdk + ref: develop + path: pico-sdk + + - name: Set Toolchain URL + run: echo >> $GITHUB_ENV TOOLCHAIN_URL=https://github.com/ARM-software/LLVM-embedded-toolchain-for-Arm/releases/download/release-17.0.1/LLVMEmbeddedToolchainForArm-17.0.1-Linux-x86_64.tar.xz + + - name: Cache Toolchain + uses: actions/cache@v3 + id: cache-toolchain + with: + path: ~/cache/ + key: ${{ runner.os }}-24-04-17-${{ env.TOOLCHAIN_URL }} + + - name: Install Toolchain + if: steps.cache-toolchain.outputs.cache-hit != 'true' + run: | + mkdir -p ~/cache/toolchain + wget --progress=dot:mega $TOOLCHAIN_URL -O toolchain.tar.xz + tar -C ~/cache/toolchain -xaf toolchain.tar.xz + + - name: Prepare to build + run: | + echo >> $GITHUB_PATH `echo ~/cache/toolchain/*/bin` + sudo apt install -y ninja-build + python3 tools/get_deps.py ${{ matrix.family }} + + - name: Build + run: python tools/build_cmake.py ${{ matrix.family }} -DTOOLCHAIN=clang -DCMAKE_BUILD_TYPE=MinSizeRel + env: + PICO_SDK_PATH: ${{ github.workspace }}/pico-sdk + + # --------------------------------------- + # Build ARM with Clang + # --------------------------------------- + msp430-gcc: + runs-on: ubuntu-latest + strategy: + fail-fast: false + matrix: + family: + # Alphabetical order + - 'msp430' + steps: + - name: Setup Python + uses: actions/setup-python@v5 + with: + python-version: '3.x' + + - name: Checkout TinyUSB + uses: actions/checkout@v4 + + - name: Set Toolchain URL + run: echo >> $GITHUB_ENV TOOLCHAIN_URL=http://software-dl.ti.com/msp430/msp430_public_sw/mcu/msp430/MSPGCC/9_2_0_0/export/msp430-gcc-9.2.0.50_linux64.tar.bz2 + + - name: Cache Toolchain + uses: actions/cache@v3 + id: cache-toolchain + with: + path: ~/cache/ + key: ${{ runner.os }}-24-04-17-${{ env.TOOLCHAIN_URL }} + + - name: Install Toolchain + if: steps.cache-toolchain.outputs.cache-hit != 'true' + run: | + mkdir -p ~/cache/toolchain + wget --progress=dot:mega $TOOLCHAIN_URL -O toolchain.tar.bz2 + tar -C ~/cache/toolchain -xaf toolchain.tar.bz2 + + - name: Prepare to build + run: | + echo >> $GITHUB_PATH `echo ~/cache/toolchain/*/bin` + sudo apt install -y ninja-build + python3 tools/get_deps.py ${{ matrix.family }} + + - name: Build + run: python tools/build_cmake.py ${{ matrix.family }} -DCMAKE_BUILD_TYPE=MinSizeRel + + # --------------------------------------- + # Hardware in the loop (HIL) + # Current self-hosted instance is running on an RPI4. For attached hardware checkout hil_pi4.json + # --------------------------------------- + hil-test: + # run only with hathach's commit due to limited resource on RPI4 + if: github.repository_owner == 'hathach' + needs: arm-gcc + runs-on: [self-hosted, rp2040, nrf52840, hardware-in-the-loop] + strategy: + fail-fast: false + matrix: + board: + - 'feather_nrf52840_express' + - 'itsybitsy_m4' + - 'raspberry_pi_pico' + steps: + - name: Clean workspace + run: | + echo "Cleaning up previous run" + rm -rf "${{ github.workspace }}" + mkdir -p "${{ github.workspace }}" + + # USB bus on rpi4 is not stable, reset it before testing + - name: Reset USB bus + run: | + lsusb + lsusb -t + # reset VIA Labs 2.0 hub + sudo usbreset 001/002 + + # legacy code + #for port in $(lspci | grep USB | cut -d' ' -f1); do + # echo -n "0000:${port}"| sudo tee /sys/bus/pci/drivers/xhci_hcd/unbind; + # sleep 0.1; + # echo -n "0000:${port}" | sudo tee /sys/bus/pci/drivers/xhci_hcd/bind; + #done + + - name: Checkout test/hil + uses: actions/checkout@v4 + with: + sparse-checkout: test/hil + + - name: Download Artifacts + uses: actions/download-artifact@v4 + with: + name: ${{ matrix.board }} + path: cmake-build/cmake-build-${{ matrix.board }} + + - name: Test on actual hardware + run: | + python3 test/hil/hil_test.py --board ${{ matrix.board }} hil_pi4.json diff --git a/.github/workflows/build_msp430.yml b/.github/workflows/build_msp430.yml deleted file mode 100644 index 95d212708..000000000 --- a/.github/workflows/build_msp430.yml +++ /dev/null @@ -1,71 +0,0 @@ -name: Build MSP430 - -on: - workflow_dispatch: - push: - paths: - - 'src/**' - - 'examples/**' - - 'lib/**' - - 'hw/**' - - 'tools/get_deps.py' - - '.github/workflows/build_msp430.yml' - pull_request: - branches: [ master ] - paths: - - 'src/**' - - 'examples/**' - - 'lib/**' - - 'hw/**' - - 'tools/get_deps.py' - - '.github/workflows/build_msp430.yml' - -concurrency: - group: ${{ github.workflow }}-${{ github.head_ref || github.run_id }} - cancel-in-progress: true - -jobs: - build-msp430: - runs-on: ubuntu-latest - strategy: - fail-fast: false - matrix: - family: - # Alphabetical order - - 'msp430' - - steps: - - name: Setup Python - uses: actions/setup-python@v5 - with: - python-version: '3.x' - - - name: Checkout TinyUSB - uses: actions/checkout@v4 - - - name: Set Toolchain URL - run: echo >> $GITHUB_ENV TOOLCHAIN_URL=http://software-dl.ti.com/msp430/msp430_public_sw/mcu/msp430/MSPGCC/9_2_0_0/export/msp430-gcc-9.2.0.50_linux64.tar.bz2 - - - name: Cache Toolchain - uses: actions/cache@v3 - id: cache-toolchain - with: - path: ~/cache/ - key: ${{ runner.os }}-21-03-04-${{ env.TOOLCHAIN_URL }} - - - name: Install Toolchain - if: steps.cache-toolchain.outputs.cache-hit != 'true' - run: | - mkdir -p ~/cache/toolchain - wget --progress=dot:mega $TOOLCHAIN_URL -O toolchain.tar.bz2 - tar -C ~/cache/toolchain -xaf toolchain.tar.bz2 - - - name: Set Toolchain Path - run: | - echo >> $GITHUB_PATH `echo ~/cache/toolchain/*/bin` - sudo apt install -y ninja-build - - - name: Build - run: | - python3 tools/get_deps.py ${{ matrix.family }} - python tools/build_cmake.py ${{ matrix.family }} -DCMAKE_BUILD_TYPE=MinSizeRel diff --git a/.github/workflows/cmake_arm.yml b/.github/workflows/cmake_arm.yml deleted file mode 100644 index 8eb1e3f74..000000000 --- a/.github/workflows/cmake_arm.yml +++ /dev/null @@ -1,248 +0,0 @@ -name: CMake ARM - -on: - workflow_dispatch: - push: - paths: - - 'src/**' - - 'examples/**' - - 'lib/**' - - 'hw/**' - - 'test/hil/**' - - 'tools/get_deps.py' - - '.github/workflows/cmake_arm.yml' - pull_request: - branches: [ master ] - paths: - - 'src/**' - - 'examples/**' - - 'lib/**' - - 'hw/**' - - 'test/hil/**' - - 'tools/get_deps.py' - - '.github/workflows/cmake_arm.yml' - -concurrency: - group: ${{ github.workflow }}-${{ github.head_ref || github.run_id }} - cancel-in-progress: true - -jobs: - # --------------------------------------- - # Build ARM with GCC - # --------------------------------------- - arm-gcc: - runs-on: ubuntu-latest - strategy: - fail-fast: false - matrix: - family: - # Alphabetical order - - 'imxrt' - - 'kinetis_k kinetis_kl' - - 'lpc17 lpc18 lpc40 lpc43' - - 'lpc54 lpc55' - - 'mcx' - - 'nrf' - - 'ra' - - 'rp2040' - - 'samd21' - - 'samd51' - - 'stm32f0' - - 'stm32f1' - - 'stm32f2' - - 'stm32f3' - - 'stm32f4' - - 'stm32f7' - - 'stm32g0' - - 'stm32g4' - - 'stm32h5' - - 'stm32h7' - - 'stm32l4' - - 'stm32u5' - steps: - - name: Setup Python - uses: actions/setup-python@v5 - with: - python-version: '3.x' - - - name: Install ARM GCC - uses: carlosperate/arm-none-eabi-gcc-action@v1 - with: - release: '12.3.Rel1' - - - name: Checkout TinyUSB - uses: actions/checkout@v4 - - - name: Checkout pico-sdk for rp2040 - if: matrix.family == 'rp2040' - uses: actions/checkout@v4 - with: - repository: raspberrypi/pico-sdk - ref: develop - path: pico-sdk - - - name: Get Dependencies - run: | - sudo apt install -y ninja-build - python3 tools/get_deps.py ${{ matrix.family }} - - - name: Build - run: python tools/build_cmake.py ${{ matrix.family }} -DCMAKE_BUILD_TYPE=MinSizeRel - env: - PICO_SDK_PATH: ${{ github.workspace }}/pico-sdk - - - name: Upload Artifacts for Hardware Testing (rp2040) - if: matrix.family == 'rp2040' && github.repository_owner == 'hathach' - uses: actions/upload-artifact@v4 - with: - name: raspberry_pi_pico - path: | - cmake-build/cmake-build-raspberry_pi_pico/*/*/*.elf - - - name: Upload Artifacts for Hardware Testing (nRF) - if: matrix.family == 'nrf' && github.repository_owner == 'hathach' - uses: actions/upload-artifact@v4 - with: - name: feather_nrf52840_express - path: | - cmake-build/cmake-build-feather_nrf52840_express/*/*/*.elf - - - name: Upload Artifacts for Hardware Testing (samd51) - if: matrix.family == 'samd51' && github.repository_owner == 'hathach' - uses: actions/upload-artifact@v4 - with: - name: itsybitsy_m4 - path: | - cmake-build/cmake-build-itsybitsy_m4/*/*/*.bin - - # --------------------------------------- - # Build ARM with Clang - # --------------------------------------- - arm-clang: - runs-on: ubuntu-latest - strategy: - fail-fast: false - matrix: - family: - # Alphabetical order - - 'imxrt' - - 'kinetis_k kinetis_kl' - - 'lpc17 lpc18 lpc40 lpc43' - - 'lpc54 lpc55' - #- 'mcx' not working with gcc anymore, need to fix this first - - 'nrf' - #- 'ra' port later - - 'rp2040' - - 'samd21' - - 'samd51' - - 'stm32f0' - - 'stm32f1' - - 'stm32f2' - - 'stm32f3' - - 'stm32f4' - - 'stm32f7' - - 'stm32g0' - - 'stm32g4' - - 'stm32h5' - - 'stm32h7' - - 'stm32l4' - - 'stm32u5' - steps: - - name: Setup Python - uses: actions/setup-python@v5 - with: - python-version: '3.x' - - - name: Checkout TinyUSB - uses: actions/checkout@v4 - - - name: Set Toolchain URL - run: echo >> $GITHUB_ENV TOOLCHAIN_URL=https://github.com/ARM-software/LLVM-embedded-toolchain-for-Arm/releases/download/release-17.0.1/LLVMEmbeddedToolchainForArm-17.0.1-Linux-x86_64.tar.xz - - - name: Cache Toolchain - uses: actions/cache@v3 - id: cache-toolchain - with: - path: ~/cache/ - key: ${{ runner.os }}-24-04-17-${{ env.TOOLCHAIN_URL }} - - - name: Install Toolchain - if: steps.cache-toolchain.outputs.cache-hit != 'true' - run: | - mkdir -p ~/cache/toolchain - wget --progress=dot:mega $TOOLCHAIN_URL -O toolchain.tar.xz - tar -C ~/cache/toolchain -xaf toolchain.tar.xz - - - name: Set Toolchain Path - run: echo >> $GITHUB_PATH `echo ~/cache/toolchain/*/bin` - - - name: Checkout pico-sdk for rp2040 - if: matrix.family == 'rp2040' - uses: actions/checkout@v4 - with: - repository: raspberrypi/pico-sdk - ref: develop - path: pico-sdk - - - name: Get Dependencies - run: | - sudo apt install -y ninja-build - python3 tools/get_deps.py ${{ matrix.family }} - - - name: Build - run: python tools/build_cmake.py ${{ matrix.family }} -DTOOLCHAIN=clang -DCMAKE_BUILD_TYPE=MinSizeRel - env: - PICO_SDK_PATH: ${{ github.workspace }}/pico-sdk - - # --------------------------------------- - # Hardware in the loop (HIL) - # Current self-hosted instance is running on an RPI4. For attached hardware checkout hil_pi4.json - # --------------------------------------- - hil-test: - # run only with hathach's commit due to limited resource on RPI4 - if: github.repository_owner == 'hathach' - needs: arm-gcc - runs-on: [self-hosted, rp2040, nrf52840, hardware-in-the-loop] - strategy: - fail-fast: false - matrix: - board: - - 'feather_nrf52840_express' - - 'itsybitsy_m4' - - 'raspberry_pi_pico' - steps: - - name: Clean workspace - run: | - echo "Cleaning up previous run" - rm -rf "${{ github.workspace }}" - mkdir -p "${{ github.workspace }}" - - # USB bus on rpi4 is not stable, reset it before testing - - name: Reset USB bus - run: | - lsusb - lsusb -t - # reset VIA Labs 2.0 hub - sudo usbreset 001/002 - - # legacy code - #for port in $(lspci | grep USB | cut -d' ' -f1); do - # echo -n "0000:${port}"| sudo tee /sys/bus/pci/drivers/xhci_hcd/unbind; - # sleep 0.1; - # echo -n "0000:${port}" | sudo tee /sys/bus/pci/drivers/xhci_hcd/bind; - #done - - - name: Checkout test/hil - uses: actions/checkout@v4 - with: - sparse-checkout: test/hil - - - name: Download Artifacts - uses: actions/download-artifact@v4 - with: - name: ${{ matrix.board }} - path: cmake-build/cmake-build-${{ matrix.board }} - - - name: Test on actual hardware - run: | - python3 test/hil/hil_test.py --board ${{ matrix.board }} hil_pi4.json -- cgit v1.3.1 From eaec0fb13998ab642bd63981e8d0686fab0b347c Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 24 Apr 2024 12:12:39 +0700 Subject: skip clang rp2040 build --- .github/workflows/build_cmake.yml | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to '.github/workflows') diff --git a/.github/workflows/build_cmake.yml b/.github/workflows/build_cmake.yml index ee6d83992..1f74bda70 100644 --- a/.github/workflows/build_cmake.yml +++ b/.github/workflows/build_cmake.yml @@ -132,7 +132,7 @@ jobs: #- 'mcx' not working with gcc anymore, need to fix this first - 'nrf' #- 'ra' port later - - 'rp2040' + #- 'rp2040' port later - 'samd21' - 'samd51' - 'stm32f0' @@ -193,7 +193,7 @@ jobs: PICO_SDK_PATH: ${{ github.workspace }}/pico-sdk # --------------------------------------- - # Build ARM with Clang + # Build MSP430 with GCC # --------------------------------------- msp430-gcc: runs-on: ubuntu-latest -- cgit v1.3.1 From b67cb26e51c7f31db0cf71c6c1ce5430bbbbb7f5 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 24 Apr 2024 16:17:33 +0700 Subject: change hil board s3 devkitm (devkitc seems to have usb issue with cp2104) --- .github/workflows/build_aarch64.yml | 2 +- .github/workflows/build_cmake.yml | 4 +- .github/workflows/build_esp.yml | 6 +-- .github/workflows/build_renesas.yml | 2 +- .github/workflows/build_riscv.yml | 2 +- examples/build_system/make/make.mk | 60 ++++++++++++------------- examples/build_system/make/toolchain/arm_gcc.mk | 3 ++ examples/build_system/make/toolchain/arm_iar.mk | 2 + examples/device/cdc_msc_freertos/Makefile | 2 +- examples/device/hid_composite_freertos/Makefile | 2 +- examples/host/cdc_msc_hid_freertos/Makefile | 2 +- hw/bsp/board.c | 13 +++--- hw/bsp/board_api.h | 1 + test/hil/hil_pi4.json | 6 +-- 14 files changed, 56 insertions(+), 51 deletions(-) (limited to '.github/workflows') diff --git a/.github/workflows/build_aarch64.yml b/.github/workflows/build_aarch64.yml index e5dbf9494..237692498 100644 --- a/.github/workflows/build_aarch64.yml +++ b/.github/workflows/build_aarch64.yml @@ -47,7 +47,7 @@ jobs: run: echo >> $GITHUB_ENV TOOLCHAIN_URL=https://developer.arm.com/-/media/Files/downloads/gnu-a/10.3-2021.07/binrel/gcc-arm-10.3-2021.07-x86_64-aarch64-none-elf.tar.xz - name: Cache Toolchain - uses: actions/cache@v3 + uses: actions/cache@v4 id: cache-toolchain with: path: ~/cache/ diff --git a/.github/workflows/build_cmake.yml b/.github/workflows/build_cmake.yml index 1f74bda70..65de47e8d 100644 --- a/.github/workflows/build_cmake.yml +++ b/.github/workflows/build_cmake.yml @@ -168,7 +168,7 @@ jobs: run: echo >> $GITHUB_ENV TOOLCHAIN_URL=https://github.com/ARM-software/LLVM-embedded-toolchain-for-Arm/releases/download/release-17.0.1/LLVMEmbeddedToolchainForArm-17.0.1-Linux-x86_64.tar.xz - name: Cache Toolchain - uses: actions/cache@v3 + uses: actions/cache@v4 id: cache-toolchain with: path: ~/cache/ @@ -216,7 +216,7 @@ jobs: run: echo >> $GITHUB_ENV TOOLCHAIN_URL=http://software-dl.ti.com/msp430/msp430_public_sw/mcu/msp430/MSPGCC/9_2_0_0/export/msp430-gcc-9.2.0.50_linux64.tar.bz2 - name: Cache Toolchain - uses: actions/cache@v3 + uses: actions/cache@v4 id: cache-toolchain with: path: ~/cache/ diff --git a/.github/workflows/build_esp.yml b/.github/workflows/build_esp.yml index d283c6535..4108a58a5 100644 --- a/.github/workflows/build_esp.yml +++ b/.github/workflows/build_esp.yml @@ -34,7 +34,7 @@ jobs: # ESP32-S2 - 'espressif_kaluga_1' # ESP32-S3 - - 'espressif_s3_devkitc' + - 'espressif_s3_devkitm' steps: - name: Setup Python uses: actions/setup-python@v5 @@ -51,7 +51,7 @@ jobs: run: docker run --rm -v $PWD:/project -w /project espressif/idf:v5.1.1 python3 tools/build_esp32.py ${{ matrix.board }} - name: Upload Artifacts for Hardware Testing - if: matrix.board == 'espressif_s3_devkitc' && github.repository_owner == 'hathach' + if: matrix.board == 'espressif_s3_devkitm' && github.repository_owner == 'hathach' uses: actions/upload-artifact@v4 with: name: ${{ matrix.board }} @@ -75,7 +75,7 @@ jobs: fail-fast: false matrix: board: - - 'espressif_s3_devkitc' + - 'espressif_s3_devkitm' steps: - name: Clean workspace run: | diff --git a/.github/workflows/build_renesas.yml b/.github/workflows/build_renesas.yml index ec06c9426..fbc12d285 100644 --- a/.github/workflows/build_renesas.yml +++ b/.github/workflows/build_renesas.yml @@ -46,7 +46,7 @@ jobs: run: echo >> $GITHUB_ENV TOOLCHAIN_URL=http://gcc-renesas.com/downloads/get.php?f=rx/8.3.0.202004-gnurx/gcc-8.3.0.202004-GNURX-ELF.run - name: Cache Toolchain - uses: actions/cache@v3 + uses: actions/cache@v4 id: cache-toolchain with: path: ~/cache/ diff --git a/.github/workflows/build_riscv.yml b/.github/workflows/build_riscv.yml index e891a3a51..7f5031ff1 100644 --- a/.github/workflows/build_riscv.yml +++ b/.github/workflows/build_riscv.yml @@ -48,7 +48,7 @@ jobs: run: echo >> $GITHUB_ENV TOOLCHAIN_URL=https://github.com/xpack-dev-tools/riscv-none-embed-gcc-xpack/releases/download/v10.1.0-1.1/xpack-riscv-none-embed-gcc-10.1.0-1.1-linux-x64.tar.gz - name: Cache Toolchain - uses: actions/cache@v3 + uses: actions/cache@v4 id: cache-toolchain with: path: ~/cache/ diff --git a/examples/build_system/make/make.mk b/examples/build_system/make/make.mk index 772befca4..2437b8766 100644 --- a/examples/build_system/make/make.mk +++ b/examples/build_system/make/make.mk @@ -15,6 +15,8 @@ TOP = $(abspath $(subst make.mk,../../..,$(THIS_MAKEFILE))) # Set CURRENT_PATH to the relative path from TOP to the current directory, ie examples/device/cdc_msc_freertos CURRENT_PATH = $(subst $(TOP)/,,$(abspath .)) +#-------------- Linux/Windows ------------ + # Detect whether shell style is windows or not # https://stackoverflow.com/questions/714100/os-detecting-makefile/52062069#52062069 ifeq '$(findstring ;,$(PATH))' ';' @@ -26,13 +28,18 @@ CMDEXE := 1 SHELL := cmd.exe endif -# Handy check parameter function -check_defined = \ - $(strip $(foreach 1,$1, \ - $(call __check_defined,$1,$(strip $(value 2))))) -__check_defined = \ - $(if $(value $1),, \ - $(error Undefined make flag: $1$(if $2, ($2)))) +ifeq ($(CMDEXE),1) + CP = copy + RM = del + MKDIR = mkdir + PYTHON = python +else + CP = cp + RM = rm + MKDIR = mkdir + PYTHON = python3 +endif + # Build directory BUILD := _build/$(BOARD) @@ -44,8 +51,8 @@ BIN := $(TOP)/_bin/$(BOARD)/$(notdir $(CURDIR)) # Board without family ifneq ($(wildcard $(TOP)/hw/bsp/$(BOARD)/board.mk),) -BOARD_PATH := hw/bsp/$(BOARD) -FAMILY := + BOARD_PATH := hw/bsp/$(BOARD) + FAMILY := endif # Board within family @@ -68,31 +75,12 @@ else SRC_C += $(subst $(TOP)/,,$(wildcard $(TOP)/$(FAMILY_PATH)/*.c)) endif -#-------------- Toolchain ------------ - -# Supported toolchain: gcc, iar +#------------------------------------------------------------- +# Toolchain +# Can be changed via TOOLCHAIN=gcc|iar or CC=arm-none-eabi-gcc|iccarm|clang +#------------------------------------------------------------- TOOLCHAIN ?= gcc -# Can be set by board, default to ARM GCC -CROSS_COMPILE ?= arm-none-eabi- - -ifeq ($(TOOLCHAIN),iar) -CC := iccarm -USE_IAR = 1 -endif - -ifeq ($(CMDEXE),1) - CP = copy - RM = del - MKDIR = mkdir - PYTHON = python -else - CP = cp - RM = rm - MKDIR = mkdir - PYTHON = python3 -endif - #-------------- Source files and compiler flags -------------- # tinyusb makefile include $(TOP)/src/tinyusb.mk @@ -143,3 +131,11 @@ endif # toolchain specific include ${TOP}/examples/build_system/make/toolchain/arm_$(TOOLCHAIN).mk + +# Handy check parameter function +check_defined = \ + $(strip $(foreach 1,$1, \ + $(call __check_defined,$1,$(strip $(value 2))))) +__check_defined = \ + $(if $(value $1),, \ + $(error Undefined make flag: $1$(if $2, ($2)))) diff --git a/examples/build_system/make/toolchain/arm_gcc.mk b/examples/build_system/make/toolchain/arm_gcc.mk index ed5ddc970..c34581ae2 100644 --- a/examples/build_system/make/toolchain/arm_gcc.mk +++ b/examples/build_system/make/toolchain/arm_gcc.mk @@ -1,5 +1,8 @@ # makefile for arm gcc toolchain +# Can be set by family, default to ARM GCC +CROSS_COMPILE ?= arm-none-eabi- + CC = $(CROSS_COMPILE)gcc CXX = $(CROSS_COMPILE)g++ AS = $(CC) -x assembler-with-cpp diff --git a/examples/build_system/make/toolchain/arm_iar.mk b/examples/build_system/make/toolchain/arm_iar.mk index 04c9f22b3..17967b41a 100644 --- a/examples/build_system/make/toolchain/arm_iar.mk +++ b/examples/build_system/make/toolchain/arm_iar.mk @@ -1,4 +1,6 @@ # makefile for arm iar toolchain + +CC = iccarm AS = iasmarm LD = ilinkarm OBJCOPY = ielftool --silent diff --git a/examples/device/cdc_msc_freertos/Makefile b/examples/device/cdc_msc_freertos/Makefile index 13f336f99..fe3fb6482 100644 --- a/examples/device/cdc_msc_freertos/Makefile +++ b/examples/device/cdc_msc_freertos/Makefile @@ -1,7 +1,7 @@ include ../../build_system/make/make.mk FREERTOS_SRC = lib/FreeRTOS-Kernel -FREERTOS_PORTABLE_PATH= $(FREERTOS_SRC)/portable/$(if $(USE_IAR),IAR,GCC) +FREERTOS_PORTABLE_PATH = $(FREERTOS_SRC)/portable/$(if $(findstring iar,$(TOOLCHAIN)),IAR,GCC) INC += \ src \ diff --git a/examples/device/hid_composite_freertos/Makefile b/examples/device/hid_composite_freertos/Makefile index add9e9814..88d602393 100644 --- a/examples/device/hid_composite_freertos/Makefile +++ b/examples/device/hid_composite_freertos/Makefile @@ -3,7 +3,7 @@ DEPS_SUBMODULES += lib/FreeRTOS-Kernel include ../../build_system/make/make.mk FREERTOS_SRC = lib/FreeRTOS-Kernel -FREERTOS_PORTABLE_PATH= $(FREERTOS_SRC)/portable/$(if $(USE_IAR),IAR,GCC) +FREERTOS_PORTABLE_PATH= $(FREERTOS_SRC)/portable/$(if $(findstring iar,$(TOOLCHAIN)),IAR,GCC) INC += \ src \ diff --git a/examples/host/cdc_msc_hid_freertos/Makefile b/examples/host/cdc_msc_hid_freertos/Makefile index 5351a6248..bf4725f47 100644 --- a/examples/host/cdc_msc_hid_freertos/Makefile +++ b/examples/host/cdc_msc_hid_freertos/Makefile @@ -1,7 +1,7 @@ include ../../build_system/make/make.mk FREERTOS_SRC = lib/FreeRTOS-Kernel -FREERTOS_PORTABLE_PATH= $(FREERTOS_SRC)/portable/$(if $(USE_IAR),IAR,GCC) +FREERTOS_PORTABLE_PATH= $(FREERTOS_SRC)/portable/$(if $(findstring iar,$(TOOLCHAIN)),IAR,GCC) INC += \ src \ diff --git a/hw/bsp/board.c b/hw/bsp/board.c index 996ac9263..cdef5e1e5 100644 --- a/hw/bsp/board.c +++ b/hw/bsp/board.c @@ -25,6 +25,14 @@ #include "board_api.h" +//--------------------------------------------------------------------+ +// Board API +//--------------------------------------------------------------------+ +int board_getchar(void) { + char c; + return (sys_read(0, &c, 1) > 0) ? (int) c : (-1); +} + //--------------------------------------------------------------------+ // newlib read()/write() retarget //--------------------------------------------------------------------+ @@ -126,8 +134,3 @@ FILE *const stdin = &__stdio; __strong_reference(stdin, stdout); __strong_reference(stdin, stderr); #endif - -int board_getchar(void) { - char c; - return (sys_read(0, &c, 1) > 0) ? (int) c : (-1); -} diff --git a/hw/bsp/board_api.h b/hw/bsp/board_api.h index 418ce3551..f21a32371 100644 --- a/hw/bsp/board_api.h +++ b/hw/bsp/board_api.h @@ -142,6 +142,7 @@ static inline size_t board_usb_get_serial(uint16_t desc_str1[], size_t max_chars uint8_t uid[16] TU_ATTR_ALIGNED(4); size_t uid_len; + // TODO work with make, but not working with esp32s3 cmake if ( board_get_unique_id ) { uid_len = board_get_unique_id(uid, sizeof(uid)); }else { diff --git a/test/hil/hil_pi4.json b/test/hil/hil_pi4.json index 17d9ff1fa..8aff81910 100644 --- a/test/hil/hil_pi4.json +++ b/test/hil/hil_pi4.json @@ -8,13 +8,13 @@ "flasher_args": "-f interface/cmsis-dap.cfg -f target/rp2040.cfg -c \"adapter speed 5000\"" }, { - "name": "espressif_s3_devkitc", - "uid": "7CDFA1E073CC", + "name": "espressif_s3_devkitm", + "uid": "84F703C084E4", "tests": [ "cdc_msc_freertos", "hid_composite_freertos" ], "flasher": "esptool", - "flasher_sn": "461cb8d7decdeb119be9b506e93fd3f1", + "flasher_sn": "3ea619acd1cdeb11a0a0b806e93fd3f1", "flasher_args": "-b 1500000" }, { -- cgit v1.3.1 From e812fce29c3f700d3262056ad88c57e846692d4d Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 2 May 2024 18:26:01 +0700 Subject: update cmake ci --- .github/workflows/build_cmake.yml | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to '.github/workflows') diff --git a/.github/workflows/build_cmake.yml b/.github/workflows/build_cmake.yml index 65de47e8d..0aed5f992 100644 --- a/.github/workflows/build_cmake.yml +++ b/.github/workflows/build_cmake.yml @@ -37,8 +37,10 @@ jobs: matrix: family: # Alphabetical order + - 'broadcom_32bit' - 'imxrt' - - 'kinetis_k kinetis_kl' + - 'kinetis_k kinetis_kl kinetis_k32l2' + - 'lpc11 lpc13 lpc15' - 'lpc17 lpc18 lpc40 lpc43' - 'lpc54 lpc55' - 'mcx' -- cgit v1.3.1 From dde13a3d4b513b272938d216d7c5142b1f086518 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 2 May 2024 21:28:43 +0700 Subject: add cmake to msp432e4 --- .github/workflows/build_cmake.yml | 3 +- hw/bsp/msp430/FreeRTOSConfig/FreeRTOSConfig.h | 80 +++++++++++ hw/bsp/msp432e4/FreeRTOSConfig/FreeRTOSConfig.h | 149 +++++++++++++++++++++ hw/bsp/msp432e4/boards/msp_exp432e401y/board.cmake | 8 ++ hw/bsp/msp432e4/boards/msp_exp432e401y/board.mk | 3 + hw/bsp/msp432e4/family.cmake | 101 ++++++++++++++ hw/bsp/msp432e4/family.mk | 23 ++-- 7 files changed, 351 insertions(+), 16 deletions(-) create mode 100644 hw/bsp/msp430/FreeRTOSConfig/FreeRTOSConfig.h create mode 100644 hw/bsp/msp432e4/FreeRTOSConfig/FreeRTOSConfig.h create mode 100644 hw/bsp/msp432e4/boards/msp_exp432e401y/board.cmake create mode 100644 hw/bsp/msp432e4/boards/msp_exp432e401y/board.mk create mode 100644 hw/bsp/msp432e4/family.cmake (limited to '.github/workflows') diff --git a/.github/workflows/build_cmake.yml b/.github/workflows/build_cmake.yml index 0aed5f992..cbe36ae79 100644 --- a/.github/workflows/build_cmake.yml +++ b/.github/workflows/build_cmake.yml @@ -42,8 +42,9 @@ jobs: - 'kinetis_k kinetis_kl kinetis_k32l2' - 'lpc11 lpc13 lpc15' - 'lpc17 lpc18 lpc40 lpc43' - - 'lpc54 lpc55' + - 'lpc51 lpc54 lpc55' - 'mcx' + - 'msp432e4' - 'nrf' - 'ra' - 'rp2040' diff --git a/hw/bsp/msp430/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/msp430/FreeRTOSConfig/FreeRTOSConfig.h new file mode 100644 index 000000000..4049fba65 --- /dev/null +++ b/hw/bsp/msp430/FreeRTOSConfig/FreeRTOSConfig.h @@ -0,0 +1,80 @@ +/* + * FreeRTOS Kernel V10.0.0 + * Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. If you wish to use our Amazon + * FreeRTOS name, please do so in a fair use way that does not cause confusion. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://www.FreeRTOS.org + * http://aws.amazon.com/freertos + * + * 1 tab == 4 spaces! + */ + +#ifndef FREERTOS_CONFIG_H +#define FREERTOS_CONFIG_H + +/*----------------------------------------------------------- + * Application specific definitions. + * + * These definitions should be adjusted for your particular hardware and + * application requirements. + * + * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE + * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE. + * + * See http://www.freertos.org/a00110.html + *----------------------------------------------------------*/ + +// skip if included from IAR assembler +#ifndef __IASMARM__ + #include "msp430.h" +#endif + +#define configUSE_PREEMPTION 1 +#define configUSE_IDLE_HOOK 1 +#define configUSE_TICK_HOOK 0 +#define configUSE_MALLOC_FAILED_HOOK 0 +#define configCPU_CLOCK_HZ ( ( unsigned long ) 7995392 ) /* Clock setup from main.c in the demo application. */ +#define configTICK_RATE_HZ ( ( TickType_t ) 1000 ) +#define configMAX_PRIORITIES ( 4 ) +#define configMINIMAL_STACK_SIZE ( ( unsigned short ) 50 ) +#define configTOTAL_HEAP_SIZE ( ( size_t ) ( 1700 ) ) +#define configMAX_TASK_NAME_LEN ( 8 ) +#define configUSE_TRACE_FACILITY 0 +#define configUSE_16_BIT_TICKS 1 +#define configIDLE_SHOULD_YIELD 1 + +#define configSUPPORT_STATIC_ALLOCATION 1 +#define configSUPPORT_DYNAMIC_ALLOCATION 0 + +/* Co-routine definitions. */ +#define configUSE_CO_ROUTINES 0 +#define configMAX_CO_ROUTINE_PRIORITIES ( 2 ) + +/* Set the following definitions to 1 to include the API function, or zero to exclude the API function. */ + +#define INCLUDE_vTaskPrioritySet 0 +#define INCLUDE_uxTaskPriorityGet 0 +#define INCLUDE_vTaskDelete 1 +#define INCLUDE_vTaskCleanUpResources 0 +#define INCLUDE_vTaskSuspend 0 +#define INCLUDE_vTaskDelayUntil 1 +#define INCLUDE_vTaskDelay 1 + +#endif /* FREERTOS_CONFIG_H */ diff --git a/hw/bsp/msp432e4/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/msp432e4/FreeRTOSConfig/FreeRTOSConfig.h new file mode 100644 index 000000000..3dd5a1ee1 --- /dev/null +++ b/hw/bsp/msp432e4/FreeRTOSConfig/FreeRTOSConfig.h @@ -0,0 +1,149 @@ +/* + * FreeRTOS Kernel V10.0.0 + * Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. If you wish to use our Amazon + * FreeRTOS name, please do so in a fair use way that does not cause confusion. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://www.FreeRTOS.org + * http://aws.amazon.com/freertos + * + * 1 tab == 4 spaces! + */ + + +#ifndef FREERTOS_CONFIG_H +#define FREERTOS_CONFIG_H + +/*----------------------------------------------------------- + * Application specific definitions. + * + * These definitions should be adjusted for your particular hardware and + * application requirements. + * + * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE + * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE. + * + * See http://www.freertos.org/a00110.html. + *----------------------------------------------------------*/ + +// skip if included from IAR assembler +#ifndef __IASMARM__ + #include "msp.h" +#endif + +/* Cortex M23/M33 port configuration. */ +#define configENABLE_MPU 0 +#define configENABLE_FPU 1 +#define configENABLE_TRUSTZONE 0 +#define configMINIMAL_SECURE_STACK_SIZE (1024) + +#define configUSE_PREEMPTION 1 +#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0 +#define configCPU_CLOCK_HZ SystemCoreClock +#define configTICK_RATE_HZ ( 1000 ) +#define configMAX_PRIORITIES ( 5 ) +#define configMINIMAL_STACK_SIZE ( 128 ) +#define configTOTAL_HEAP_SIZE ( configSUPPORT_DYNAMIC_ALLOCATION*4*1024 ) +#define configMAX_TASK_NAME_LEN 16 +#define configUSE_16_BIT_TICKS 0 +#define configIDLE_SHOULD_YIELD 1 +#define configUSE_MUTEXES 1 +#define configUSE_RECURSIVE_MUTEXES 1 +#define configUSE_COUNTING_SEMAPHORES 1 +#define configQUEUE_REGISTRY_SIZE 4 +#define configUSE_QUEUE_SETS 0 +#define configUSE_TIME_SLICING 0 +#define configUSE_NEWLIB_REENTRANT 0 +#define configENABLE_BACKWARD_COMPATIBILITY 1 +#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 + +#define configSUPPORT_STATIC_ALLOCATION 1 +#define configSUPPORT_DYNAMIC_ALLOCATION 0 + +/* Hook function related definitions. */ +#define configUSE_IDLE_HOOK 0 +#define configUSE_TICK_HOOK 0 +#define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning +#define configCHECK_FOR_STACK_OVERFLOW 2 +#define configCHECK_HANDLER_INSTALLATION 0 + +/* Run time and task stats gathering related definitions. */ +#define configGENERATE_RUN_TIME_STATS 0 +#define configRECORD_STACK_HIGH_ADDRESS 1 +#define configUSE_TRACE_FACILITY 1 // legacy trace +#define configUSE_STATS_FORMATTING_FUNCTIONS 0 + +/* Co-routine definitions. */ +#define configUSE_CO_ROUTINES 0 +#define configMAX_CO_ROUTINE_PRIORITIES 2 + +/* Software timer related definitions. */ +#define configUSE_TIMERS 1 +#define configTIMER_TASK_PRIORITY (configMAX_PRIORITIES-2) +#define configTIMER_QUEUE_LENGTH 32 +#define configTIMER_TASK_STACK_DEPTH configMINIMAL_STACK_SIZE + +/* Optional functions - most linkers will remove unused functions anyway. */ +#define INCLUDE_vTaskPrioritySet 0 +#define INCLUDE_uxTaskPriorityGet 0 +#define INCLUDE_vTaskDelete 0 +#define INCLUDE_vTaskSuspend 1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY +#define INCLUDE_xResumeFromISR 0 +#define INCLUDE_vTaskDelayUntil 1 +#define INCLUDE_vTaskDelay 1 +#define INCLUDE_xTaskGetSchedulerState 0 +#define INCLUDE_xTaskGetCurrentTaskHandle 1 +#define INCLUDE_uxTaskGetStackHighWaterMark 0 +#define INCLUDE_xTaskGetIdleTaskHandle 0 +#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0 +#define INCLUDE_pcTaskGetTaskName 0 +#define INCLUDE_eTaskGetState 0 +#define INCLUDE_xEventGroupSetBitFromISR 0 +#define INCLUDE_xTimerPendFunctionCall 0 + +/* FreeRTOS hooks to NVIC vectors */ +#define xPortPendSVHandler PendSV_Handler +#define xPortSysTickHandler SysTick_Handler +#define vPortSVCHandler SVC_Handler + +//--------------------------------------------------------------------+ +// Interrupt nesting behavior configuration. +//--------------------------------------------------------------------+ + +// For Cortex-M specific: __NVIC_PRIO_BITS is defined in mcu header +#define configPRIO_BITS 3 + +/* The lowest interrupt priority that can be used in a call to a "set priority" function. */ +#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY ((1< Date: Fri, 3 May 2024 11:39:42 +0700 Subject: add cmake for stm32wb --- .github/workflows/build_arm.yml | 9 +- .github/workflows/build_cmake.yml | 4 +- hw/bsp/stm32f0/family.cmake | 92 +++++++++-------- hw/bsp/stm32f1/family.cmake | 92 +++++++++-------- hw/bsp/stm32f2/family.cmake | 92 +++++++++-------- hw/bsp/stm32f3/family.cmake | 88 ++++++++-------- hw/bsp/stm32f7/family.cmake | 96 ++++++++--------- hw/bsp/stm32h7/family.cmake | 100 +++++++++--------- hw/bsp/stm32l0/family.cmake | 94 ++++++++--------- hw/bsp/stm32l4/family.cmake | 94 ++++++++--------- hw/bsp/stm32u5/family.cmake | 96 ++++++++--------- hw/bsp/stm32wb/boards/stm32wb55nucleo/board.cmake | 10 ++ hw/bsp/stm32wb/boards/stm32wb55nucleo/board.mk | 6 +- hw/bsp/stm32wb/family.c | 72 ++++++------- hw/bsp/stm32wb/family.cmake | 119 ++++++++++++++++++++++ hw/bsp/stm32wb/family.mk | 22 ++-- 16 files changed, 611 insertions(+), 475 deletions(-) create mode 100644 hw/bsp/stm32wb/boards/stm32wb55nucleo/board.cmake create mode 100644 hw/bsp/stm32wb/family.cmake (limited to '.github/workflows') diff --git a/.github/workflows/build_arm.yml b/.github/workflows/build_arm.yml index 12e6615ea..55c4bd204 100644 --- a/.github/workflows/build_arm.yml +++ b/.github/workflows/build_arm.yml @@ -35,13 +35,8 @@ jobs: matrix: family: # Alphabetical order - - 'broadcom_32bit' - - 'kinetis_k32l2' - - 'lpc11 lpc13 lpc15' - - 'lpc51' - - 'mm32 msp432e4' - - 'samd11 same5x saml2x' - - 'stm32l0 stm32wb' + - 'mm32' + - 'samd11 same5x' - 'tm4c123 xmc4000' steps: - name: Setup Python diff --git a/.github/workflows/build_cmake.yml b/.github/workflows/build_cmake.yml index cbe36ae79..38df38730 100644 --- a/.github/workflows/build_cmake.yml +++ b/.github/workflows/build_cmake.yml @@ -48,8 +48,7 @@ jobs: - 'nrf' - 'ra' - 'rp2040' - - 'samd21' - - 'samd51' + - 'samd21 saml2x samd51' - 'stm32f0' - 'stm32f1' - 'stm32f2' @@ -62,6 +61,7 @@ jobs: - 'stm32h7' - 'stm32l4' - 'stm32u5' + - 'stm32wb' steps: - name: Setup Python uses: actions/setup-python@v5 diff --git a/hw/bsp/stm32f0/family.cmake b/hw/bsp/stm32f0/family.cmake index 427c56671..0af200dd5 100644 --- a/hw/bsp/stm32f0/family.cmake +++ b/hw/bsp/stm32f0/family.cmake @@ -22,54 +22,56 @@ set(FAMILY_MCUS STM32F0 CACHE INTERNAL "") #------------------------------------ # only need to be built ONCE for all examples function(add_board_target BOARD_TARGET) - if (NOT TARGET ${BOARD_TARGET}) - # Startup & Linker script - set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s) - set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) - set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s) - - set(LD_FILE_Clang ${LD_FILE_GNU}) - set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf) - - add_library(${BOARD_TARGET} STATIC - ${ST_CMSIS}/Source/Templates/system_${ST_PREFIX}.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_cortex.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc_ex.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_gpio.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart_ex.c - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} + if (TARGET ${BOARD_TARGET}) + return() + endif() + + # Startup & Linker script + set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s) + set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) + set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s) + + set(LD_FILE_Clang ${LD_FILE_GNU}) + set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf) + + add_library(${BOARD_TARGET} STATIC + ${ST_CMSIS}/Source/Templates/system_${ST_PREFIX}.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_cortex.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc_ex.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_gpio.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart_ex.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} + ) + target_include_directories(${BOARD_TARGET} PUBLIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${CMSIS_5}/CMSIS/Core/Include + ${ST_CMSIS}/Include + ${ST_HAL_DRIVER}/Inc + ) + #target_compile_options(${BOARD_TARGET} PUBLIC) + target_compile_definitions(${BOARD_TARGET} PUBLIC + CFG_EXAMPLE_MSC_READONLY + ) + + update_board(${BOARD_TARGET}) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -nostartfiles + --specs=nosys.specs --specs=nano.specs ) - target_include_directories(${BOARD_TARGET} PUBLIC - ${CMAKE_CURRENT_FUNCTION_LIST_DIR} - ${CMSIS_5}/CMSIS/Core/Include - ${ST_CMSIS}/Include - ${ST_HAL_DRIVER}/Inc + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_Clang}" ) - #target_compile_options(${BOARD_TARGET} PUBLIC) - target_compile_definitions(${BOARD_TARGET} PUBLIC - CFG_EXAMPLE_MSC_READONLY + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" ) - - update_board(${BOARD_TARGET}) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - -nostartfiles - --specs=nosys.specs --specs=nano.specs - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_Clang}" - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--config=${LD_FILE_IAR}" - ) - endif () endif () endfunction() diff --git a/hw/bsp/stm32f1/family.cmake b/hw/bsp/stm32f1/family.cmake index cf7e8e9b1..e8cc4db1f 100644 --- a/hw/bsp/stm32f1/family.cmake +++ b/hw/bsp/stm32f1/family.cmake @@ -22,53 +22,55 @@ set(FAMILY_MCUS STM32F1 CACHE INTERNAL "") #------------------------------------ # only need to be built ONCE for all examples function(add_board_target BOARD_TARGET) - if (NOT TARGET ${BOARD_TARGET}) - # Startup & Linker script - set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s) - set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) - set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s) - - set(LD_FILE_Clang ${LD_FILE_GNU}) - if (NOT DEFINED LD_FILE_IAR) - set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf) - endif () - - add_library(${BOARD_TARGET} STATIC - ${ST_CMSIS}/Source/Templates/system_${ST_PREFIX}.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_cortex.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc_ex.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_gpio.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart.c - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} + if (TARGET ${BOARD_TARGET}) + return() + endif() + +# Startup & Linker script + set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s) + set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) + set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s) + + set(LD_FILE_Clang ${LD_FILE_GNU}) + if (NOT DEFINED LD_FILE_IAR) + set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf) + endif () + + add_library(${BOARD_TARGET} STATIC + ${ST_CMSIS}/Source/Templates/system_${ST_PREFIX}.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_cortex.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc_ex.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_gpio.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} + ) + target_include_directories(${BOARD_TARGET} PUBLIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${CMSIS_5}/CMSIS/Core/Include + ${ST_CMSIS}/Include + ${ST_HAL_DRIVER}/Inc + ) + #target_compile_options(${BOARD_TARGET} PUBLIC) + #target_compile_definitions(${BOARD_TARGET} PUBLIC) + + update_board(${BOARD_TARGET}) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -nostartfiles + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_Clang}" ) - target_include_directories(${BOARD_TARGET} PUBLIC - ${CMAKE_CURRENT_FUNCTION_LIST_DIR} - ${CMSIS_5}/CMSIS/Core/Include - ${ST_CMSIS}/Include - ${ST_HAL_DRIVER}/Inc + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" ) - #target_compile_options(${BOARD_TARGET} PUBLIC) - #target_compile_definitions(${BOARD_TARGET} PUBLIC) - - update_board(${BOARD_TARGET}) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - -nostartfiles - --specs=nosys.specs --specs=nano.specs - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_Clang}" - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--config=${LD_FILE_IAR}" - ) - endif () endif () endfunction() diff --git a/hw/bsp/stm32f2/family.cmake b/hw/bsp/stm32f2/family.cmake index 862680bce..a01ebef5c 100644 --- a/hw/bsp/stm32f2/family.cmake +++ b/hw/bsp/stm32f2/family.cmake @@ -22,53 +22,55 @@ set(FAMILY_MCUS STM32F2 CACHE INTERNAL "") #------------------------------------ # only need to be built ONCE for all examples function(add_board_target BOARD_TARGET) - if (NOT TARGET ${BOARD_TARGET}) - # Startup & Linker script - set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s) - set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) - set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s) - - set(LD_FILE_Clang ${LD_FILE_GNU}) - if (NOT DEFINED LD_FILE_IAR) - set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf) - endif () - - add_library(${BOARD_TARGET} STATIC - ${ST_CMSIS}/Source/Templates/system_${ST_PREFIX}.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_cortex.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc_ex.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_gpio.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart.c - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} + if (TARGET ${BOARD_TARGET}) + return() + endif() + + # Startup & Linker script + set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s) + set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) + set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s) + + set(LD_FILE_Clang ${LD_FILE_GNU}) + if (NOT DEFINED LD_FILE_IAR) + set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf) + endif () + + add_library(${BOARD_TARGET} STATIC + ${ST_CMSIS}/Source/Templates/system_${ST_PREFIX}.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_cortex.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc_ex.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_gpio.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} + ) + target_include_directories(${BOARD_TARGET} PUBLIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${CMSIS_5}/CMSIS/Core/Include + ${ST_CMSIS}/Include + ${ST_HAL_DRIVER}/Inc + ) + #target_compile_options(${BOARD_TARGET} PUBLIC) + #target_compile_definitions(${BOARD_TARGET} PUBLIC) + + update_board(${BOARD_TARGET}) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -nostartfiles + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_Clang}" ) - target_include_directories(${BOARD_TARGET} PUBLIC - ${CMAKE_CURRENT_FUNCTION_LIST_DIR} - ${CMSIS_5}/CMSIS/Core/Include - ${ST_CMSIS}/Include - ${ST_HAL_DRIVER}/Inc + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" ) - #target_compile_options(${BOARD_TARGET} PUBLIC) - #target_compile_definitions(${BOARD_TARGET} PUBLIC) - - update_board(${BOARD_TARGET}) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - -nostartfiles - --specs=nosys.specs --specs=nano.specs - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_Clang}" - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--config=${LD_FILE_IAR}" - ) - endif () endif () endfunction() diff --git a/hw/bsp/stm32f3/family.cmake b/hw/bsp/stm32f3/family.cmake index 0a28e480b..dbba1e658 100644 --- a/hw/bsp/stm32f3/family.cmake +++ b/hw/bsp/stm32f3/family.cmake @@ -22,51 +22,53 @@ set(FAMILY_MCUS STM32F3 CACHE INTERNAL "") #------------------------------------ # only need to be built ONCE for all examples function(add_board_target BOARD_TARGET) - if (NOT TARGET ${BOARD_TARGET}) - # Startup & Linker script - set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s) - set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) - set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s) - - set(LD_FILE_Clang ${LD_FILE_GNU}) - set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf) - - add_library(${BOARD_TARGET} STATIC - ${ST_CMSIS}/Source/Templates/system_${ST_PREFIX}.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_cortex.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc_ex.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_gpio.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart.c - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} + if (TARGET ${BOARD_TARGET}) + return() + endif() + + # Startup & Linker script + set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s) + set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) + set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s) + + set(LD_FILE_Clang ${LD_FILE_GNU}) + set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf) + + add_library(${BOARD_TARGET} STATIC + ${ST_CMSIS}/Source/Templates/system_${ST_PREFIX}.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_cortex.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc_ex.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_gpio.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} + ) + target_include_directories(${BOARD_TARGET} PUBLIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${CMSIS_5}/CMSIS/Core/Include + ${ST_CMSIS}/Include + ${ST_HAL_DRIVER}/Inc + ) + #target_compile_options(${BOARD_TARGET} PUBLIC) + #target_compile_definitions(${BOARD_TARGET} PUBLIC) + + update_board(${BOARD_TARGET}) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -nostartfiles + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_Clang}" ) - target_include_directories(${BOARD_TARGET} PUBLIC - ${CMAKE_CURRENT_FUNCTION_LIST_DIR} - ${CMSIS_5}/CMSIS/Core/Include - ${ST_CMSIS}/Include - ${ST_HAL_DRIVER}/Inc + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" ) - #target_compile_options(${BOARD_TARGET} PUBLIC) - #target_compile_definitions(${BOARD_TARGET} PUBLIC) - - update_board(${BOARD_TARGET}) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - -nostartfiles - --specs=nosys.specs --specs=nano.specs - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_Clang}" - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--config=${LD_FILE_IAR}" - ) - endif () endif () endfunction() diff --git a/hw/bsp/stm32f7/family.cmake b/hw/bsp/stm32f7/family.cmake index 17e632c40..938c2697a 100644 --- a/hw/bsp/stm32f7/family.cmake +++ b/hw/bsp/stm32f7/family.cmake @@ -22,55 +22,57 @@ set(FAMILY_MCUS STM32F7 CACHE INTERNAL "") #------------------------------------ # only need to be built ONCE for all examples function(add_board_target BOARD_TARGET) - if (NOT TARGET ${BOARD_TARGET}) - # Startup & Linker script - set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s) - set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) - set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s) - - set(LD_FILE_Clang ${LD_FILE_GNU}) - set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf) - - add_library(${BOARD_TARGET} STATIC - ${ST_CMSIS}/Source/Templates/system_${ST_PREFIX}.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_cortex.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_dma.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_gpio.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_pwr.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_pwr_ex.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc_ex.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart_ex.c - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} + if (TARGET ${BOARD_TARGET}) + return() + endif() + + # Startup & Linker script + set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s) + set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) + set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s) + + set(LD_FILE_Clang ${LD_FILE_GNU}) + set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf) + + add_library(${BOARD_TARGET} STATIC + ${ST_CMSIS}/Source/Templates/system_${ST_PREFIX}.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_cortex.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_dma.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_gpio.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_pwr.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_pwr_ex.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc_ex.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart_ex.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} + ) + target_include_directories(${BOARD_TARGET} PUBLIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${CMSIS_5}/CMSIS/Core/Include + ${ST_CMSIS}/Include + ${ST_HAL_DRIVER}/Inc + ) + #target_compile_options(${BOARD_TARGET} PUBLIC) + #target_compile_definitions(${BOARD_TARGET} PUBLIC) + + update_board(${BOARD_TARGET}) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -nostartfiles + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_Clang}" ) - target_include_directories(${BOARD_TARGET} PUBLIC - ${CMAKE_CURRENT_FUNCTION_LIST_DIR} - ${CMSIS_5}/CMSIS/Core/Include - ${ST_CMSIS}/Include - ${ST_HAL_DRIVER}/Inc + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" ) - #target_compile_options(${BOARD_TARGET} PUBLIC) - #target_compile_definitions(${BOARD_TARGET} PUBLIC) - - update_board(${BOARD_TARGET}) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - -nostartfiles - --specs=nosys.specs --specs=nano.specs - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_Clang}" - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--config=${LD_FILE_IAR}" - ) - endif () endif () endfunction() diff --git a/hw/bsp/stm32h7/family.cmake b/hw/bsp/stm32h7/family.cmake index e5ae6c69d..026c7c3df 100644 --- a/hw/bsp/stm32h7/family.cmake +++ b/hw/bsp/stm32h7/family.cmake @@ -22,57 +22,59 @@ set(FAMILY_MCUS STM32H7 CACHE INTERNAL "") #------------------------------------ # only need to be built ONCE for all examples function(add_board_target BOARD_TARGET) - if (NOT TARGET ${BOARD_TARGET}) - # Startup & Linker script - set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s) - set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) - set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s) - - set(LD_FILE_Clang ${LD_FILE_GNU}) - if(NOT DEFINED LD_FILE_IAR) - set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf) - endif() - - add_library(${BOARD_TARGET} STATIC - ${ST_CMSIS}/Source/Templates/system_${ST_PREFIX}.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_cortex.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_dma.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_gpio.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_pwr.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_pwr_ex.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc_ex.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart_ex.c - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} + if (TARGET ${BOARD_TARGET}) + return() + endif() + + # Startup & Linker script + set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s) + set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) + set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s) + + set(LD_FILE_Clang ${LD_FILE_GNU}) + if(NOT DEFINED LD_FILE_IAR) + set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf) + endif() + + add_library(${BOARD_TARGET} STATIC + ${ST_CMSIS}/Source/Templates/system_${ST_PREFIX}.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_cortex.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_dma.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_gpio.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_pwr.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_pwr_ex.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc_ex.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart_ex.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} + ) + target_include_directories(${BOARD_TARGET} PUBLIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${CMSIS_5}/CMSIS/Core/Include + ${ST_CMSIS}/Include + ${ST_HAL_DRIVER}/Inc + ) + #target_compile_options(${BOARD_TARGET} PUBLIC) + #target_compile_definitions(${BOARD_TARGET} PUBLIC) + + update_board(${BOARD_TARGET}) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -nostartfiles + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_Clang}" ) - target_include_directories(${BOARD_TARGET} PUBLIC - ${CMAKE_CURRENT_FUNCTION_LIST_DIR} - ${CMSIS_5}/CMSIS/Core/Include - ${ST_CMSIS}/Include - ${ST_HAL_DRIVER}/Inc + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" ) - #target_compile_options(${BOARD_TARGET} PUBLIC) - #target_compile_definitions(${BOARD_TARGET} PUBLIC) - - update_board(${BOARD_TARGET}) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - -nostartfiles - --specs=nosys.specs --specs=nano.specs - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_Clang}" - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--config=${LD_FILE_IAR}" - ) - endif () endif () endfunction() diff --git a/hw/bsp/stm32l0/family.cmake b/hw/bsp/stm32l0/family.cmake index 962c55587..c04927585 100644 --- a/hw/bsp/stm32l0/family.cmake +++ b/hw/bsp/stm32l0/family.cmake @@ -22,55 +22,57 @@ set(FAMILY_MCUS STM32L0 CACHE INTERNAL "") #------------------------------------ # only need to be built ONCE for all examples function(add_board_target BOARD_TARGET) - if (NOT TARGET ${BOARD_TARGET}) - # Startup & Linker script - set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s) - set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) - set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s) - - set(LD_FILE_Clang ${LD_FILE_GNU}) - set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf) - - add_library(${BOARD_TARGET} STATIC - ${ST_CMSIS}/Source/Templates/system_${ST_PREFIX}.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_cortex.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc_ex.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_gpio.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart_ex.c - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} + if (TARGET ${BOARD_TARGET}) + return() + endif() + + # Startup & Linker script + set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s) + set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) + set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s) + + set(LD_FILE_Clang ${LD_FILE_GNU}) + set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf) + + add_library(${BOARD_TARGET} STATIC + ${ST_CMSIS}/Source/Templates/system_${ST_PREFIX}.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_cortex.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc_ex.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_gpio.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart_ex.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} + ) + target_include_directories(${BOARD_TARGET} PUBLIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${CMSIS_5}/CMSIS/Core/Include + ${ST_CMSIS}/Include + ${ST_HAL_DRIVER}/Inc + ) + #target_compile_options(${BOARD_TARGET} PUBLIC) + target_compile_definitions(${BOARD_TARGET} PUBLIC + CFG_EXAMPLE_MSC_READONLY + CFG_EXAMPLE_VIDEO_READONLY + ) + + update_board(${BOARD_TARGET}) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -nostartfiles + --specs=nosys.specs --specs=nano.specs ) - target_include_directories(${BOARD_TARGET} PUBLIC - ${CMAKE_CURRENT_FUNCTION_LIST_DIR} - ${CMSIS_5}/CMSIS/Core/Include - ${ST_CMSIS}/Include - ${ST_HAL_DRIVER}/Inc + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_Clang}" ) - #target_compile_options(${BOARD_TARGET} PUBLIC) - target_compile_definitions(${BOARD_TARGET} PUBLIC - CFG_EXAMPLE_MSC_READONLY - CFG_EXAMPLE_VIDEO_READONLY + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" ) - - update_board(${BOARD_TARGET}) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - -nostartfiles - --specs=nosys.specs --specs=nano.specs - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_Clang}" - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--config=${LD_FILE_IAR}" - ) - endif () endif () endfunction() diff --git a/hw/bsp/stm32l4/family.cmake b/hw/bsp/stm32l4/family.cmake index c42b6a8d7..b6eae7c7f 100644 --- a/hw/bsp/stm32l4/family.cmake +++ b/hw/bsp/stm32l4/family.cmake @@ -22,55 +22,57 @@ set(FAMILY_MCUS STM32L4 CACHE INTERNAL "") #------------------------------------ # only need to be built ONCE for all examples function(add_board_target BOARD_TARGET) - if (NOT TARGET ${BOARD_TARGET}) - # Startup & Linker script - set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s) - set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) - set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s) - - set(LD_FILE_Clang ${LD_FILE_GNU}) - set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf) - - add_library(${BOARD_TARGET} STATIC - ${ST_CMSIS}/Source/Templates/system_${ST_PREFIX}.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_cortex.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_dma.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_gpio.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_pwr.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_pwr_ex.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc_ex.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart_ex.c - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} - ) - target_include_directories(${BOARD_TARGET} PUBLIC - ${CMAKE_CURRENT_FUNCTION_LIST_DIR} - ${CMSIS_5}/CMSIS/Core/Include - ${ST_CMSIS}/Include - ${ST_HAL_DRIVER}/Inc - ) + if (TARGET ${BOARD_TARGET}) + return() + endif() + + # Startup & Linker script + set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s) + set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) + set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s) + + set(LD_FILE_Clang ${LD_FILE_GNU}) + set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf) + + add_library(${BOARD_TARGET} STATIC + ${ST_CMSIS}/Source/Templates/system_${ST_PREFIX}.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_cortex.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_dma.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_gpio.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_pwr.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_pwr_ex.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc_ex.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart_ex.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} + ) + target_include_directories(${BOARD_TARGET} PUBLIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${CMSIS_5}/CMSIS/Core/Include + ${ST_CMSIS}/Include + ${ST_HAL_DRIVER}/Inc + ) # target_compile_options(${BOARD_TARGET} PUBLIC) # target_compile_definitions(${BOARD_TARGET} PUBLIC) - update_board(${BOARD_TARGET}) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - -nostartfiles - --specs=nosys.specs --specs=nano.specs - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_Clang}" - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--config=${LD_FILE_IAR}" - ) - endif () + update_board(${BOARD_TARGET}) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -nostartfiles + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_Clang}" + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) endif () endfunction() diff --git a/hw/bsp/stm32u5/family.cmake b/hw/bsp/stm32u5/family.cmake index d3cb78abf..7402540b7 100644 --- a/hw/bsp/stm32u5/family.cmake +++ b/hw/bsp/stm32u5/family.cmake @@ -22,55 +22,57 @@ set(FAMILY_MCUS STM32U5 CACHE INTERNAL "") #------------------------------------ # only need to be built ONCE for all examples function(add_board_target BOARD_TARGET) - if (NOT TARGET ${BOARD_TARGET}) - # Startup & Linker script - set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s) - set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) - set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s) - - string(REPLACE "stm32u" "STM32U" MCU_VARIANT_UPPER ${MCU_VARIANT}) - if (NOT DEFINED LD_FILE_GNU) - set(LD_FILE_GNU ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/linker/${MCU_VARIANT_UPPER}_FLASH.ld) - endif () - set(LD_FILE_Clang ${LD_FILE_GNU}) - set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf) - - add_library(${BOARD_TARGET} STATIC - ${ST_CMSIS}/Source/Templates/system_${ST_PREFIX}.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_cortex.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_gpio.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_icache.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_pwr_ex.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc_ex.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart_ex.c - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} + if (TARGET ${BOARD_TARGET}) + return() + endif() + + # Startup & Linker script + set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s) + set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) + set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s) + + string(REPLACE "stm32u" "STM32U" MCU_VARIANT_UPPER ${MCU_VARIANT}) + if (NOT DEFINED LD_FILE_GNU) + set(LD_FILE_GNU ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/linker/${MCU_VARIANT_UPPER}_FLASH.ld) + endif () + set(LD_FILE_Clang ${LD_FILE_GNU}) + set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf) + + add_library(${BOARD_TARGET} STATIC + ${ST_CMSIS}/Source/Templates/system_${ST_PREFIX}.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_cortex.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_gpio.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_icache.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_pwr_ex.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc_ex.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart_ex.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} + ) + target_include_directories(${BOARD_TARGET} PUBLIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${CMSIS_5}/CMSIS/Core/Include + ${ST_CMSIS}/Include + ${ST_HAL_DRIVER}/Inc + ) + update_board(${BOARD_TARGET}) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -nostartfiles + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_Clang}" ) - target_include_directories(${BOARD_TARGET} PUBLIC - ${CMAKE_CURRENT_FUNCTION_LIST_DIR} - ${CMSIS_5}/CMSIS/Core/Include - ${ST_CMSIS}/Include - ${ST_HAL_DRIVER}/Inc + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" ) - update_board(${BOARD_TARGET}) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - -nostartfiles - --specs=nosys.specs --specs=nano.specs - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_Clang}" - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--config=${LD_FILE_IAR}" - ) - endif () endif () endfunction() diff --git a/hw/bsp/stm32wb/boards/stm32wb55nucleo/board.cmake b/hw/bsp/stm32wb/boards/stm32wb55nucleo/board.cmake new file mode 100644 index 000000000..5512aa2ee --- /dev/null +++ b/hw/bsp/stm32wb/boards/stm32wb55nucleo/board.cmake @@ -0,0 +1,10 @@ +set(MCU_VARIANT stm32wb55xx) +set(JLINK_DEVICE STM32WB55RG) + +set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/stm32wb55xx_flash_cm4.ld) + +function(update_board TARGET) + target_compile_definitions(${TARGET} PUBLIC + STM32WB55xx + ) +endfunction() diff --git a/hw/bsp/stm32wb/boards/stm32wb55nucleo/board.mk b/hw/bsp/stm32wb/boards/stm32wb55nucleo/board.mk index d6adc6b63..009883f30 100644 --- a/hw/bsp/stm32wb/boards/stm32wb55nucleo/board.mk +++ b/hw/bsp/stm32wb/boards/stm32wb55nucleo/board.mk @@ -1,9 +1,7 @@ +MCU_VARIANT = stm32wb55xx + CFLAGS += \ -DSTM32WB55xx -LD_FILE = $(BOARD_PATH)/stm32wb55xx_flash_cm4.ld - -SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32wb55xx_cm4.s - # For flash-jlink target JLINK_DEVICE = STM32WB55RG diff --git a/hw/bsp/stm32wb/family.c b/hw/bsp/stm32wb/family.c index d483c95b7..1dc789407 100644 --- a/hw/bsp/stm32wb/family.c +++ b/hw/bsp/stm32wb/family.c @@ -31,13 +31,11 @@ //--------------------------------------------------------------------+ // Forward USB interrupt events to TinyUSB IRQ Handler //--------------------------------------------------------------------+ -void USB_HP_IRQHandler(void) -{ +void USB_HP_IRQHandler(void) { tud_int_handler(0); } -void USB_LP_IRQHandler(void) -{ +void USB_LP_IRQHandler(void) { tud_int_handler(0); } @@ -46,8 +44,7 @@ void USB_LP_IRQHandler(void) //--------------------------------------------------------------------+ UART_HandleTypeDef UartHandle; -void board_init(void) -{ +void board_init(void) { board_clock_init(); // Enable All GPIOs clocks @@ -71,7 +68,7 @@ void board_init(void) NVIC_SetPriority(USB_LP_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); #endif - GPIO_InitTypeDef GPIO_InitStruct; + GPIO_InitTypeDef GPIO_InitStruct; // LED GPIO_InitStruct.Pin = LED_PIN; @@ -102,22 +99,22 @@ void board_init(void) #ifdef UART_DEV // UART - GPIO_InitStruct.Pin = UART_TX_PIN | UART_RX_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Pull = GPIO_PULLUP; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + GPIO_InitStruct.Pin = UART_TX_PIN | UART_RX_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_PULLUP; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; GPIO_InitStruct.Alternate = UART_GPIO_AF; HAL_GPIO_Init(UART_GPIO_PORT, &GPIO_InitStruct); - UartHandle = (UART_HandleTypeDef){ - .Instance = UART_DEV, - .Init.BaudRate = CFG_BOARD_UART_BAUDRATE, - .Init.WordLength = UART_WORDLENGTH_8B, - .Init.StopBits = UART_STOPBITS_1, - .Init.Parity = UART_PARITY_NONE, - .Init.HwFlowCtl = UART_HWCONTROL_NONE, - .Init.Mode = UART_MODE_TX_RX, - .Init.OverSampling = UART_OVERSAMPLING_16 + UartHandle = (UART_HandleTypeDef) { + .Instance = UART_DEV, + .Init.BaudRate = CFG_BOARD_UART_BAUDRATE, + .Init.WordLength = UART_WORDLENGTH_8B, + .Init.StopBits = UART_STOPBITS_1, + .Init.Parity = UART_PARITY_NONE, + .Init.HwFlowCtl = UART_HWCONTROL_NONE, + .Init.Mode = UART_MODE_TX_RX, + .Init.OverSampling = UART_OVERSAMPLING_16 }; HAL_UART_Init(&UartHandle); #endif @@ -138,26 +135,23 @@ void board_init(void) // Board porting API //--------------------------------------------------------------------+ -void board_led_write(bool state) -{ - HAL_GPIO_WritePin(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); +void board_led_write(bool state) { + HAL_GPIO_WritePin(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1 - LED_STATE_ON)); } -uint32_t board_button_read(void) -{ +uint32_t board_button_read(void) { return BUTTON_STATE_ACTIVE == HAL_GPIO_ReadPin(BUTTON_PORT, BUTTON_PIN); } -int board_uart_read(uint8_t* buf, int len) -{ - (void) buf; (void) len; +int board_uart_read(uint8_t* buf, int len) { + (void) buf; + (void) len; return 0; } -int board_uart_write(void const * buf, int len) -{ +int board_uart_write(void const* buf, int len) { #ifdef UART_DEV - HAL_UART_Transmit(&UartHandle, (uint8_t*)(uintptr_t) buf, len, 0xffff); + HAL_UART_Transmit(&UartHandle, (uint8_t*) (uintptr_t) buf, len, 0xffff); return len; #else (void) buf; (void) len; (void) UartHandle; @@ -165,28 +159,26 @@ int board_uart_write(void const * buf, int len) #endif } -#if CFG_TUSB_OS == OPT_OS_NONE +#if CFG_TUSB_OS == OPT_OS_NONE volatile uint32_t system_ticks = 0; -void SysTick_Handler (void) -{ + +void SysTick_Handler(void) { HAL_IncTick(); system_ticks++; } -uint32_t board_millis(void) -{ +uint32_t board_millis(void) { return system_ticks; } + #endif -void HardFault_Handler (void) -{ +void HardFault_Handler(void) { asm("bkpt"); } // Required by __libc_init_array in startup code if we are compiling using // -nostdlib/-nostartfiles. -void _init(void) -{ +void _init(void) { } diff --git a/hw/bsp/stm32wb/family.cmake b/hw/bsp/stm32wb/family.cmake new file mode 100644 index 000000000..071797c20 --- /dev/null +++ b/hw/bsp/stm32wb/family.cmake @@ -0,0 +1,119 @@ +include_guard() + +set(ST_FAMILY wb) +set(ST_PREFIX stm32${ST_FAMILY}xx) + +set(ST_HAL_DRIVER ${TOP}/hw/mcu/st/stm32${ST_FAMILY}xx_hal_driver) +set(ST_CMSIS ${TOP}/hw/mcu/st/cmsis_device_${ST_FAMILY}) +set(CMSIS_5 ${TOP}/lib/CMSIS_5) + +# include board specific +include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) + +# toolchain set up +set(CMAKE_SYSTEM_PROCESSOR cortex-m4 CACHE INTERNAL "System Processor") +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) + +set(FAMILY_MCUS STM32WB CACHE INTERNAL "") + + +#------------------------------------ +# BOARD_TARGET +#------------------------------------ +# only need to be built ONCE for all examples +function(add_board_target BOARD_TARGET) + if (TARGET ${BOARD_TARGET}) + return() + endif() + + # Startup & Linker script + set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}_cm4.s) + set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) + set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}_cm4.s) + + if (NOT DEFINED LD_FILE_GNU) + set(LD_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/linker/${MCU_VARIANT}_flash_cm4.ld) + endif() + set(LD_FILE_Clang ${LD_FILE_GNU}) + set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash_cm4.icf) + + add_library(${BOARD_TARGET} STATIC + ${ST_CMSIS}/Source/Templates/system_${ST_PREFIX}.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_cortex.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_dma.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_gpio.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_pwr.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_pwr_ex.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc_ex.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart_ex.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} + ) + target_include_directories(${BOARD_TARGET} PUBLIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${CMSIS_5}/CMSIS/Core/Include + ${ST_CMSIS}/Include + ${ST_HAL_DRIVER}/Inc + ) +# target_compile_options(${BOARD_TARGET} PUBLIC) +# target_compile_definitions(${BOARD_TARGET} PUBLIC) + + update_board(${BOARD_TARGET}) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -nostartfiles + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_Clang}" + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () +endfunction() + + +#------------------------------------ +# Functions +#------------------------------------ +function(family_configure_example TARGET RTOS) + family_configure_common(${TARGET} ${RTOS}) + + # Board target + add_board_target(board_${BOARD}) + + #---------- Port Specific ---------- + # These files are built for each example since it depends on example's tusb_config.h + target_sources(${TARGET} PUBLIC + # BSP + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ) + target_include_directories(${TARGET} PUBLIC + # family, hw, board + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} + ) + + # Add TinyUSB target and port source + family_add_tinyusb(${TARGET} OPT_MCU_${FAMILY_MCUS} ${RTOS}) + target_sources(${TARGET}-tinyusb PUBLIC + ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c + ) + target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + + # Link dependencies + target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) + + # Flashing + family_flash_stlink(${TARGET}) + family_flash_jlink(${TARGET}) +endfunction() diff --git a/hw/bsp/stm32wb/family.mk b/hw/bsp/stm32wb/family.mk index 287b58ce5..de8372eea 100644 --- a/hw/bsp/stm32wb/family.mk +++ b/hw/bsp/stm32wb/family.mk @@ -1,7 +1,7 @@ UF2_FAMILY_ID = 0x70d16653 ST_FAMILY = wb -DEPS_SUBMODULES += lib/CMSIS_5 hw/mcu/st/cmsis_device_$(ST_FAMILY) hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver +ST_PREFIX = stm32${ST_FAMILY}xx ST_CMSIS = hw/mcu/st/cmsis_device_$(ST_FAMILY) ST_HAL_DRIVER = hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver @@ -16,18 +16,22 @@ CFLAGS += \ # suppress warning caused by vendor mcu driver CFLAGS += -Wno-error=cast-align -Wno-unused-parameter +LD_FILE ?= ${ST_CMSIS}/Source/Templates/gcc/linker/${MCU_VARIANT}_flash_cm4.ld + LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs SRC_C += \ src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c \ - $(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_cortex.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_pwr_ex.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc_ex.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_uart.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_gpio.c + $(ST_CMSIS)/Source/Templates/system_${ST_PREFIX}.c \ + $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_hal.c \ + $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_hal_cortex.c \ + $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_hal_pwr_ex.c \ + $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_hal_rcc.c \ + $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_hal_rcc_ex.c \ + $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_hal_uart.c \ + $(ST_HAL_DRIVER)/Src/${ST_PREFIX}_hal_gpio.c + +SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_${MCU_VARIANT}_cm4.s INC += \ $(TOP)/$(BOARD_PATH) \ -- cgit v1.3.1 From 1cf68f98b397b145e9a5c0660b8447edcfa895ec Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 3 May 2024 12:45:41 +0700 Subject: - add cmake to samd11 - build_cmake.py always build with -DCMAKE_BUILD_TYPE=MinSizeRel --- .github/workflows/build_cmake.yml | 6 +- .github/workflows/build_iar.yml | 2 +- hw/bsp/samd11/FreeRTOSConfig/FreeRTOSConfig.h | 153 +++++++++++++++++++++ hw/bsp/samd11/boards/cynthion_d11/board.cmake | 14 ++ hw/bsp/samd11/boards/cynthion_d11/board.mk | 2 +- hw/bsp/samd11/boards/cynthion_d11/cynthion_d11.ld | 146 ++++++++++++++++++++ .../boards/cynthion_d11/samd11d14am_flash.ld | 144 ------------------- hw/bsp/samd11/boards/samd11_xplained/board.cmake | 8 ++ .../boards/samd11_xplained/samd11d14am_flash.ld | 2 + hw/bsp/samd11/family.c | 16 ++- hw/bsp/samd11/family.cmake | 116 ++++++++++++++++ hw/bsp/samd11/family.mk | 6 +- hw/bsp/samd21/FreeRTOSConfig/FreeRTOSConfig.h | 6 +- hw/bsp/saml2x/FreeRTOSConfig/FreeRTOSConfig.h | 6 +- hw/bsp/stm32wb/FreeRTOSConfig/FreeRTOSConfig.h | 6 +- tools/build_cmake.py | 2 +- 16 files changed, 476 insertions(+), 159 deletions(-) create mode 100644 hw/bsp/samd11/FreeRTOSConfig/FreeRTOSConfig.h create mode 100644 hw/bsp/samd11/boards/cynthion_d11/board.cmake create mode 100644 hw/bsp/samd11/boards/cynthion_d11/cynthion_d11.ld delete mode 100644 hw/bsp/samd11/boards/cynthion_d11/samd11d14am_flash.ld create mode 100644 hw/bsp/samd11/boards/samd11_xplained/board.cmake create mode 100644 hw/bsp/samd11/family.cmake (limited to '.github/workflows') diff --git a/.github/workflows/build_cmake.yml b/.github/workflows/build_cmake.yml index 38df38730..be24c09d4 100644 --- a/.github/workflows/build_cmake.yml +++ b/.github/workflows/build_cmake.yml @@ -90,7 +90,7 @@ jobs: python3 tools/get_deps.py ${{ matrix.family }} - name: Build - run: python tools/build_cmake.py ${{ matrix.family }} -DCMAKE_BUILD_TYPE=MinSizeRel + run: python tools/build_cmake.py ${{ matrix.family }} env: PICO_SDK_PATH: ${{ github.workspace }}/pico-sdk @@ -191,7 +191,7 @@ jobs: python3 tools/get_deps.py ${{ matrix.family }} - name: Build - run: python tools/build_cmake.py ${{ matrix.family }} -DTOOLCHAIN=clang -DCMAKE_BUILD_TYPE=MinSizeRel + run: python tools/build_cmake.py ${{ matrix.family }} -DTOOLCHAIN=clang env: PICO_SDK_PATH: ${{ github.workspace }}/pico-sdk @@ -239,7 +239,7 @@ jobs: python3 tools/get_deps.py ${{ matrix.family }} - name: Build - run: python tools/build_cmake.py ${{ matrix.family }} -DCMAKE_BUILD_TYPE=MinSizeRel + run: python tools/build_cmake.py ${{ matrix.family }} # --------------------------------------- # Hardware in the loop (HIL) diff --git a/.github/workflows/build_iar.yml b/.github/workflows/build_iar.yml index 499349904..6b1493a97 100644 --- a/.github/workflows/build_iar.yml +++ b/.github/workflows/build_iar.yml @@ -52,7 +52,7 @@ jobs: run: python3 tools/get_deps.py ${{ matrix.family }} - name: Build - run: python3 tools/build_cmake.py ${{ matrix.family }} -DTOOLCHAIN=iar -DCMAKE_BUILD_TYPE=MinSizeRel + run: python3 tools/build_cmake.py ${{ matrix.family }} -DTOOLCHAIN=iar - name: Test on actual hardware (hardware in the loop) run: | diff --git a/hw/bsp/samd11/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/samd11/FreeRTOSConfig/FreeRTOSConfig.h new file mode 100644 index 000000000..6c9ecae2d --- /dev/null +++ b/hw/bsp/samd11/FreeRTOSConfig/FreeRTOSConfig.h @@ -0,0 +1,153 @@ +/* + * FreeRTOS Kernel V10.0.0 + * Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. If you wish to use our Amazon + * FreeRTOS name, please do so in a fair use way that does not cause confusion. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://www.FreeRTOS.org + * http://aws.amazon.com/freertos + * + * 1 tab == 4 spaces! + */ + + +#ifndef FREERTOS_CONFIG_H +#define FREERTOS_CONFIG_H + +/*----------------------------------------------------------- + * Application specific definitions. + * + * These definitions should be adjusted for your particular hardware and + * application requirements. + * + * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE + * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE. + * + * See http://www.freertos.org/a00110.html. + *----------------------------------------------------------*/ + +// skip if included from IAR assembler +#ifndef __IASMARM__ + #include "sam.h" +#endif + +/* Cortex M23/M33 port configuration. */ +#define configENABLE_MPU 0 +#if defined(__ARM_FP) && __ARM_FP >= 4 + #define configENABLE_FPU 1 +#else + #define configENABLE_FPU 0 +#endif +#define configENABLE_TRUSTZONE 0 +#define configMINIMAL_SECURE_STACK_SIZE (1024) + +#define configUSE_PREEMPTION 1 +#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0 +#define configCPU_CLOCK_HZ SystemCoreClock +#define configTICK_RATE_HZ ( 1000 ) +#define configMAX_PRIORITIES ( 5 ) +#define configMINIMAL_STACK_SIZE ( 128 ) +#define configTOTAL_HEAP_SIZE ( configSUPPORT_DYNAMIC_ALLOCATION*4*1024 ) +#define configMAX_TASK_NAME_LEN 16 +#define configUSE_16_BIT_TICKS 0 +#define configIDLE_SHOULD_YIELD 1 +#define configUSE_MUTEXES 1 +#define configUSE_RECURSIVE_MUTEXES 1 +#define configUSE_COUNTING_SEMAPHORES 1 +#define configQUEUE_REGISTRY_SIZE 4 +#define configUSE_QUEUE_SETS 0 +#define configUSE_TIME_SLICING 0 +#define configUSE_NEWLIB_REENTRANT 0 +#define configENABLE_BACKWARD_COMPATIBILITY 1 +#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 + +#define configSUPPORT_STATIC_ALLOCATION 1 +#define configSUPPORT_DYNAMIC_ALLOCATION 0 + +/* Hook function related definitions. */ +#define configUSE_IDLE_HOOK 0 +#define configUSE_TICK_HOOK 0 +#define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning +#define configCHECK_FOR_STACK_OVERFLOW 2 +#define configCHECK_HANDLER_INSTALLATION 0 + +/* Run time and task stats gathering related definitions. */ +#define configGENERATE_RUN_TIME_STATS 0 +#define configRECORD_STACK_HIGH_ADDRESS 1 +#define configUSE_TRACE_FACILITY 1 // legacy trace +#define configUSE_STATS_FORMATTING_FUNCTIONS 0 + +/* Co-routine definitions. */ +#define configUSE_CO_ROUTINES 0 +#define configMAX_CO_ROUTINE_PRIORITIES 2 + +/* Software timer related definitions. */ +#define configUSE_TIMERS 1 +#define configTIMER_TASK_PRIORITY (configMAX_PRIORITIES-2) +#define configTIMER_QUEUE_LENGTH 32 +#define configTIMER_TASK_STACK_DEPTH configMINIMAL_STACK_SIZE + +/* Optional functions - most linkers will remove unused functions anyway. */ +#define INCLUDE_vTaskPrioritySet 0 +#define INCLUDE_uxTaskPriorityGet 0 +#define INCLUDE_vTaskDelete 0 +#define INCLUDE_vTaskSuspend 1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY +#define INCLUDE_xResumeFromISR 0 +#define INCLUDE_vTaskDelayUntil 1 +#define INCLUDE_vTaskDelay 1 +#define INCLUDE_xTaskGetSchedulerState 0 +#define INCLUDE_xTaskGetCurrentTaskHandle 1 +#define INCLUDE_uxTaskGetStackHighWaterMark 0 +#define INCLUDE_xTaskGetIdleTaskHandle 0 +#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0 +#define INCLUDE_pcTaskGetTaskName 0 +#define INCLUDE_eTaskGetState 0 +#define INCLUDE_xEventGroupSetBitFromISR 0 +#define INCLUDE_xTimerPendFunctionCall 0 + +/* FreeRTOS hooks to NVIC vectors */ +#define xPortPendSVHandler PendSV_Handler +#define xPortSysTickHandler SysTick_Handler +#define vPortSVCHandler SVC_Handler + +//--------------------------------------------------------------------+ +// Interrupt nesting behavior configuration. +//--------------------------------------------------------------------+ + +// For Cortex-M specific: __NVIC_PRIO_BITS is defined in mcu header +#define configPRIO_BITS 2 + +/* The lowest interrupt priority that can be used in a call to a "set priority" function. */ +#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY ((1< rom + + /* .ARM.exidx is sorted, so has to go in its own output section. */ + PROVIDE_HIDDEN (__exidx_start = .); + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > rom + PROVIDE_HIDDEN (__exidx_end = .); + + . = ALIGN(4); + _etext = .; + + .relocate : AT (_etext) + { + . = ALIGN(4); + _srelocate = .; + *(.ramfunc .ramfunc.*); + *(.data .data.*); + . = ALIGN(4); + _erelocate = .; + } > ram + + /* .bss section which is used for uninitialized data */ + .bss (NOLOAD) : + { + . = ALIGN(4); + _sbss = . ; + _szero = .; + *(.bss .bss.*) + *(COMMON) + . = ALIGN(4); + _ebss = . ; + _ezero = .; + end = .; + } > ram + + /* stack section */ + .stack (NOLOAD): + { + . = ALIGN(8); + _sstack = .; + . = . + STACK_SIZE; + . = ALIGN(8); + _estack = .; + } > ram + + . = ALIGN(4); + _end = . ; +} diff --git a/hw/bsp/samd11/boards/cynthion_d11/samd11d14am_flash.ld b/hw/bsp/samd11/boards/cynthion_d11/samd11d14am_flash.ld deleted file mode 100644 index 57e7f8904..000000000 --- a/hw/bsp/samd11/boards/cynthion_d11/samd11d14am_flash.ld +++ /dev/null @@ -1,144 +0,0 @@ -/** - * \file - * - * \brief Linker script for running in internal FLASH on the SAMD11D14AM - * - * Copyright (c) 2018 Microchip Technology Inc. - * - * \asf_license_start - * - * \page License - * - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the "License"); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the Licence at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an AS IS BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - * \asf_license_stop - * - */ - - -OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -OUTPUT_ARCH(arm) -SEARCH_DIR(.) - -/* Memory Spaces Definitions */ -MEMORY -{ - rom (rx) : ORIGIN = 0x00000000 + BOOTLOADER_SIZE, LENGTH = 0x00004000 - BOOTLOADER_SIZE - ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00001000 -} - -/* The stack size used by the application. NOTE: you need to adjust according to your application. */ -STACK_SIZE = DEFINED(__stack_size__) ? __stack_size__ : 0x400; - -/* Section Definitions */ -SECTIONS -{ - .text : - { - . = ALIGN(4); - _sfixed = .; - KEEP(*(.vectors .vectors.*)) - *(.text .text.* .gnu.linkonce.t.*) - *(.glue_7t) *(.glue_7) - *(.rodata .rodata* .gnu.linkonce.r.*) - *(.ARM.extab* .gnu.linkonce.armextab.*) - - /* Support C constructors, and C destructors in both user code - and the C library. This also provides support for C++ code. */ - . = ALIGN(4); - KEEP(*(.init)) - . = ALIGN(4); - __preinit_array_start = .; - KEEP (*(.preinit_array)) - __preinit_array_end = .; - - . = ALIGN(4); - __init_array_start = .; - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array)) - __init_array_end = .; - - . = ALIGN(4); - KEEP (*crtbegin.o(.ctors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) - KEEP (*(SORT(.ctors.*))) - KEEP (*crtend.o(.ctors)) - - . = ALIGN(4); - KEEP(*(.fini)) - - . = ALIGN(4); - __fini_array_start = .; - KEEP (*(.fini_array)) - KEEP (*(SORT(.fini_array.*))) - __fini_array_end = .; - - KEEP (*crtbegin.o(.dtors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) - KEEP (*(SORT(.dtors.*))) - KEEP (*crtend.o(.dtors)) - - . = ALIGN(4); - _efixed = .; /* End of text section */ - } > rom - - /* .ARM.exidx is sorted, so has to go in its own output section. */ - PROVIDE_HIDDEN (__exidx_start = .); - .ARM.exidx : - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > rom - PROVIDE_HIDDEN (__exidx_end = .); - - . = ALIGN(4); - _etext = .; - - .relocate : AT (_etext) - { - . = ALIGN(4); - _srelocate = .; - *(.ramfunc .ramfunc.*); - *(.data .data.*); - . = ALIGN(4); - _erelocate = .; - } > ram - - /* .bss section which is used for uninitialized data */ - .bss (NOLOAD) : - { - . = ALIGN(4); - _sbss = . ; - _szero = .; - *(.bss .bss.*) - *(COMMON) - . = ALIGN(4); - _ebss = . ; - _ezero = .; - end = .; - } > ram - - /* stack section */ - .stack (NOLOAD): - { - . = ALIGN(8); - _sstack = .; - . = . + STACK_SIZE; - . = ALIGN(8); - _estack = .; - } > ram - - . = ALIGN(4); - _end = . ; -} diff --git a/hw/bsp/samd11/boards/samd11_xplained/board.cmake b/hw/bsp/samd11/boards/samd11_xplained/board.cmake new file mode 100644 index 000000000..13a6e3af7 --- /dev/null +++ b/hw/bsp/samd11/boards/samd11_xplained/board.cmake @@ -0,0 +1,8 @@ +set(JLINK_DEVICE ATSAMD11D14) +set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/samd11d14am_flash.ld) + +function(update_board TARGET) + target_compile_definitions(${TARGET} PUBLIC + __SAMD11D14AM__ + ) +endfunction() diff --git a/hw/bsp/samd11/boards/samd11_xplained/samd11d14am_flash.ld b/hw/bsp/samd11/boards/samd11_xplained/samd11d14am_flash.ld index 75d880f62..3a35914e2 100644 --- a/hw/bsp/samd11/boards/samd11_xplained/samd11d14am_flash.ld +++ b/hw/bsp/samd11/boards/samd11_xplained/samd11d14am_flash.ld @@ -32,6 +32,8 @@ OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") OUTPUT_ARCH(arm) SEARCH_DIR(.) +ENTRY(Reset_Handler) + /* Memory Spaces Definitions */ MEMORY { diff --git a/hw/bsp/samd11/family.c b/hw/bsp/samd11/family.c index e15f8c91c..a6588805a 100644 --- a/hw/bsp/samd11/family.c +++ b/hw/bsp/samd11/family.c @@ -25,8 +25,12 @@ */ #include "sam.h" -#include "bsp/board_api.h" -#include "board.h" + +// Suppress warning caused by mcu driver +#ifdef __GNUC__ +#pragma GCC diagnostic push +#pragma GCC diagnostic ignored "-Wcast-qual" +#endif #include "hal/include/hal_gpio.h" #include "hal/include/hal_init.h" @@ -36,6 +40,14 @@ #include "hpl_pm_config.h" #include "hpl/pm/hpl_pm_base.h" +#ifdef __GNUC__ +#pragma GCC diagnostic pop +#endif + +#include "bsp/board_api.h" +#include "board.h" + + //--------------------------------------------------------------------+ // Forward USB interrupt events to TinyUSB IRQ Handler //--------------------------------------------------------------------+ diff --git a/hw/bsp/samd11/family.cmake b/hw/bsp/samd11/family.cmake new file mode 100644 index 000000000..33b309873 --- /dev/null +++ b/hw/bsp/samd11/family.cmake @@ -0,0 +1,116 @@ +include_guard() + +set(MCU_VARIANT samd11) +set(SDK_DIR ${TOP}/hw/mcu/microchip/${MCU_VARIANT}) +set(CMSIS_5 ${TOP}/lib/CMSIS_5) + +include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) + +# toolchain set up +set(CMAKE_SYSTEM_PROCESSOR cortex-m0plus CACHE INTERNAL "System Processor") +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) + +set(FAMILY_MCUS SAMD11 CACHE INTERNAL "") +set(OPENOCD_OPTION "-f interface/cmsis-dap.cfg -c \"transport select swd\" -f target/at91samdXX.cfg") + +#------------------------------------ +# BOARD_TARGET +#------------------------------------ +# only need to be built ONCE for all examples +function(add_board_target BOARD_TARGET) + if (TARGET ${BOARD_TARGET}) + return() + endif () + + set(LD_FILE_Clang ${LD_FILE_GNU}) + if (NOT DEFINED LD_FILE_${CMAKE_C_COMPILER_ID}) + message(FATAL_ERROR "LD_FILE_${CMAKE_C_COMPILER_ID} not defined") + endif () + + set(STARTUP_FILE_GNU ${SDK_DIR}/gcc/gcc/startup_${MCU_VARIANT}.c) + set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) + + add_library(${BOARD_TARGET} STATIC + ${SDK_DIR}/gcc/system_${MCU_VARIANT}.c + ${SDK_DIR}/hal/src/hal_atomic.c + ${SDK_DIR}/hpl/gclk/hpl_gclk.c + ${SDK_DIR}/hpl/pm/hpl_pm.c + ${SDK_DIR}/hpl/sysctrl/hpl_sysctrl.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} + ) + target_include_directories(${BOARD_TARGET} PUBLIC + ${SDK_DIR} + ${SDK_DIR}/config + ${SDK_DIR}/include + ${SDK_DIR}/hal/include + ${SDK_DIR}/hal/utils/include + ${SDK_DIR}/hpl/pm + ${SDK_DIR}/hpl/port + ${SDK_DIR}/hri + ${CMSIS_5}/CMSIS/Core/Include + ) + target_compile_definitions(${BOARD_TARGET} PUBLIC + CONF_DFLL_OVERWRITE_CALIBRATION=0 + OSC32K_OVERWRITE_CALIBRATION=0 + CFG_EXAMPLE_MSC_READONLY + CFG_EXAMPLE_VIDEO_READONLY + ) + + update_board(${BOARD_TARGET}) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -nostartfiles + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_Clang}" + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () +endfunction() + + +#------------------------------------ +# Functions +#------------------------------------ +function(family_configure_example TARGET RTOS) + family_configure_common(${TARGET} ${RTOS}) + + # Board target + add_board_target(board_${BOARD}) + + #---------- Port Specific ---------- + # These files are built for each example since it depends on example's tusb_config.h + target_sources(${TARGET} PUBLIC + # BSP + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ) + target_include_directories(${TARGET} PUBLIC + # family, hw, board + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} + ) + + # Add TinyUSB target and port source + family_add_tinyusb(${TARGET} OPT_MCU_SAMD11 ${RTOS}) + target_sources(${TARGET}-tinyusb PUBLIC + ${TOP}/src/portable/microchip/samd/dcd_samd.c + ) + target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + + # Link dependencies + target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) + + # Flashing + family_add_bin_hex(${TARGET}) + family_flash_jlink(${TARGET}) + #family_flash_openocd(${TARGET} ${OPENOCD_OPTION}) +endfunction() diff --git a/hw/bsp/samd11/family.mk b/hw/bsp/samd11/family.mk index 38430f017..c41a0dd37 100644 --- a/hw/bsp/samd11/family.mk +++ b/hw/bsp/samd11/family.mk @@ -1,5 +1,3 @@ -DEPS_SUBMODULES += hw/mcu/microchip - include $(TOP)/$(BOARD_PATH)/board.mk CPU_CORE ?= cortex-m0plus @@ -22,12 +20,12 @@ LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs SRC_C += \ src/portable/microchip/samd/dcd_samd.c \ - hw/mcu/microchip/samd11/gcc/gcc/startup_samd11.c \ hw/mcu/microchip/samd11/gcc/system_samd11.c \ + hw/mcu/microchip/samd11/gcc/gcc/startup_samd11.c \ + hw/mcu/microchip/samd11/hal/src/hal_atomic.c \ hw/mcu/microchip/samd11/hpl/gclk/hpl_gclk.c \ hw/mcu/microchip/samd11/hpl/pm/hpl_pm.c \ hw/mcu/microchip/samd11/hpl/sysctrl/hpl_sysctrl.c \ - hw/mcu/microchip/samd11/hal/src/hal_atomic.c INC += \ $(TOP)/$(BOARD_PATH) \ diff --git a/hw/bsp/samd21/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/samd21/FreeRTOSConfig/FreeRTOSConfig.h index 4aa0f8cca..6c9ecae2d 100644 --- a/hw/bsp/samd21/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/samd21/FreeRTOSConfig/FreeRTOSConfig.h @@ -49,7 +49,11 @@ /* Cortex M23/M33 port configuration. */ #define configENABLE_MPU 0 -#define configENABLE_FPU 1 +#if defined(__ARM_FP) && __ARM_FP >= 4 + #define configENABLE_FPU 1 +#else + #define configENABLE_FPU 0 +#endif #define configENABLE_TRUSTZONE 0 #define configMINIMAL_SECURE_STACK_SIZE (1024) diff --git a/hw/bsp/saml2x/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/saml2x/FreeRTOSConfig/FreeRTOSConfig.h index 4aa0f8cca..6c9ecae2d 100644 --- a/hw/bsp/saml2x/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/saml2x/FreeRTOSConfig/FreeRTOSConfig.h @@ -49,7 +49,11 @@ /* Cortex M23/M33 port configuration. */ #define configENABLE_MPU 0 -#define configENABLE_FPU 1 +#if defined(__ARM_FP) && __ARM_FP >= 4 + #define configENABLE_FPU 1 +#else + #define configENABLE_FPU 0 +#endif #define configENABLE_TRUSTZONE 0 #define configMINIMAL_SECURE_STACK_SIZE (1024) diff --git a/hw/bsp/stm32wb/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/stm32wb/FreeRTOSConfig/FreeRTOSConfig.h index 4c05c93d4..6ad115f60 100644 --- a/hw/bsp/stm32wb/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/stm32wb/FreeRTOSConfig/FreeRTOSConfig.h @@ -49,7 +49,11 @@ /* Cortex M23/M33 port configuration. */ #define configENABLE_MPU 0 -#define configENABLE_FPU 1 +#if defined(__ARM_FP) && __ARM_FP >= 4 + #define configENABLE_FPU 1 +#else + #define configENABLE_FPU 0 +#endif #define configENABLE_TRUSTZONE 0 #define configMINIMAL_SECURE_STACK_SIZE (1024) diff --git a/tools/build_cmake.py b/tools/build_cmake.py index e539b9f94..2eda3f90f 100644 --- a/tools/build_cmake.py +++ b/tools/build_cmake.py @@ -36,7 +36,7 @@ def build_family(family, cmake_option): # Generate build r = subprocess.run(f"cmake examples -B {build_dir} -G \"Ninja\" -DFAMILY={family} -DBOARD" - f"={board} {cmake_option}", shell=True, stdout=subprocess.PIPE, stderr=subprocess.STDOUT) + f"={board} -DCMAKE_BUILD_TYPE=MinSizeRel {cmake_option}", shell=True, stdout=subprocess.PIPE, stderr=subprocess.STDOUT) # Build if r.returncode == 0: -- cgit v1.3.1 From 4b86b492603cbb869b7cbcad704f92009b6c364f Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 3 May 2024 15:15:27 +0700 Subject: merge samd51 and same5x --- .github/workflows/build_arm.yml | 2 +- .github/workflows/build_cmake.yml | 2 +- hw/bsp/samd11/family.cmake | 8 +- hw/bsp/samd51/boards/d5035_01/board.cmake | 13 + hw/bsp/samd51/boards/d5035_01/board.h | 198 ++++++++++++ hw/bsp/samd51/boards/d5035_01/board.mk | 21 ++ hw/bsp/samd51/boards/d5035_01/same51j19a_flash.ld | 166 ++++++++++ .../samd51/boards/feather_m4_express/board.cmake | 2 + hw/bsp/samd51/boards/feather_m4_express/board.mk | 2 + hw/bsp/samd51/boards/itsybitsy_m4/board.cmake | 2 + hw/bsp/samd51/boards/itsybitsy_m4/board.mk | 2 + hw/bsp/samd51/boards/metro_m4_express/board.cmake | 2 + hw/bsp/samd51/boards/metro_m4_express/board.mk | 2 + hw/bsp/samd51/boards/pybadge/board.cmake | 2 + hw/bsp/samd51/boards/pybadge/board.mk | 2 + hw/bsp/samd51/boards/pyportal/board.cmake | 2 + hw/bsp/samd51/boards/pyportal/board.mk | 2 + hw/bsp/samd51/boards/same54_xplained/board.cmake | 10 + hw/bsp/samd51/boards/same54_xplained/board.h | 50 +++ hw/bsp/samd51/boards/same54_xplained/board.mk | 9 + .../boards/same54_xplained/same54p20a_flash.ld | 166 ++++++++++ .../boards/same54_xplained/same54p20a_sram.ld | 165 ++++++++++ hw/bsp/samd51/family.c | 57 +++- hw/bsp/samd51/family.cmake | 19 +- hw/bsp/samd51/family.mk | 35 +- hw/bsp/same5x/boards/d5035_01/board.mk | 21 -- hw/bsp/same5x/boards/d5035_01/d5035_01.c | 353 --------------------- hw/bsp/same5x/boards/d5035_01/same51j19a_flash.ld | 164 ---------- hw/bsp/same5x/boards/same54_xplained/board.mk | 12 - .../boards/same54_xplained/same54_xplained.c | 306 ------------------ .../boards/same54_xplained/same54p20a_flash.ld | 163 ---------- .../boards/same54_xplained/same54p20a_sram.ld | 162 ---------- hw/bsp/same5x/family.mk | 38 --- hw/bsp/saml2x/boards/atsaml21_xpro/board.cmake | 2 +- hw/bsp/saml2x/boards/atsaml21_xpro/board.mk | 2 +- hw/bsp/saml2x/boards/saml22_feather/board.cmake | 2 +- hw/bsp/saml2x/boards/saml22_feather/board.mk | 2 +- hw/bsp/saml2x/boards/sensorwatch_m0/board.cmake | 2 +- hw/bsp/saml2x/boards/sensorwatch_m0/board.mk | 2 +- hw/bsp/saml2x/family.cmake | 6 +- hw/bsp/saml2x/family.mk | 6 +- 41 files changed, 919 insertions(+), 1265 deletions(-) create mode 100644 hw/bsp/samd51/boards/d5035_01/board.cmake create mode 100644 hw/bsp/samd51/boards/d5035_01/board.h create mode 100644 hw/bsp/samd51/boards/d5035_01/board.mk create mode 100644 hw/bsp/samd51/boards/d5035_01/same51j19a_flash.ld create mode 100644 hw/bsp/samd51/boards/same54_xplained/board.cmake create mode 100644 hw/bsp/samd51/boards/same54_xplained/board.h create mode 100644 hw/bsp/samd51/boards/same54_xplained/board.mk create mode 100644 hw/bsp/samd51/boards/same54_xplained/same54p20a_flash.ld create mode 100644 hw/bsp/samd51/boards/same54_xplained/same54p20a_sram.ld delete mode 100644 hw/bsp/same5x/boards/d5035_01/board.mk delete mode 100644 hw/bsp/same5x/boards/d5035_01/d5035_01.c delete mode 100644 hw/bsp/same5x/boards/d5035_01/same51j19a_flash.ld delete mode 100644 hw/bsp/same5x/boards/same54_xplained/board.mk delete mode 100644 hw/bsp/same5x/boards/same54_xplained/same54_xplained.c delete mode 100644 hw/bsp/same5x/boards/same54_xplained/same54p20a_flash.ld delete mode 100644 hw/bsp/same5x/boards/same54_xplained/same54p20a_sram.ld delete mode 100644 hw/bsp/same5x/family.mk (limited to '.github/workflows') diff --git a/.github/workflows/build_arm.yml b/.github/workflows/build_arm.yml index 55c4bd204..40dc77593 100644 --- a/.github/workflows/build_arm.yml +++ b/.github/workflows/build_arm.yml @@ -36,7 +36,7 @@ jobs: family: # Alphabetical order - 'mm32' - - 'samd11 same5x' + - 'same5x' - 'tm4c123 xmc4000' steps: - name: Setup Python diff --git a/.github/workflows/build_cmake.yml b/.github/workflows/build_cmake.yml index be24c09d4..75ce707aa 100644 --- a/.github/workflows/build_cmake.yml +++ b/.github/workflows/build_cmake.yml @@ -48,7 +48,7 @@ jobs: - 'nrf' - 'ra' - 'rp2040' - - 'samd21 saml2x samd51' + - 'samd11 samd21 saml2x samd51' - 'stm32f0' - 'stm32f1' - 'stm32f2' diff --git a/hw/bsp/samd11/family.cmake b/hw/bsp/samd11/family.cmake index 33b309873..c0d1f5a7e 100644 --- a/hw/bsp/samd11/family.cmake +++ b/hw/bsp/samd11/family.cmake @@ -1,7 +1,7 @@ include_guard() -set(MCU_VARIANT samd11) -set(SDK_DIR ${TOP}/hw/mcu/microchip/${MCU_VARIANT}) +set(SAM_FAMILY samd11) +set(SDK_DIR ${TOP}/hw/mcu/microchip/${SAM_FAMILY}) set(CMSIS_5 ${TOP}/lib/CMSIS_5) include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) @@ -27,11 +27,11 @@ function(add_board_target BOARD_TARGET) message(FATAL_ERROR "LD_FILE_${CMAKE_C_COMPILER_ID} not defined") endif () - set(STARTUP_FILE_GNU ${SDK_DIR}/gcc/gcc/startup_${MCU_VARIANT}.c) + set(STARTUP_FILE_GNU ${SDK_DIR}/gcc/gcc/startup_${SAM_FAMILY}.c) set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) add_library(${BOARD_TARGET} STATIC - ${SDK_DIR}/gcc/system_${MCU_VARIANT}.c + ${SDK_DIR}/gcc/system_${SAM_FAMILY}.c ${SDK_DIR}/hal/src/hal_atomic.c ${SDK_DIR}/hpl/gclk/hpl_gclk.c ${SDK_DIR}/hpl/pm/hpl_pm.c diff --git a/hw/bsp/samd51/boards/d5035_01/board.cmake b/hw/bsp/samd51/boards/d5035_01/board.cmake new file mode 100644 index 000000000..adf4f6a6d --- /dev/null +++ b/hw/bsp/samd51/boards/d5035_01/board.cmake @@ -0,0 +1,13 @@ +set(SAM_FAMILY same51) + +set(JLINK_DEVICE ATSAME51J19) +set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/same51j19a_flash.ld) + +function(update_board TARGET) + target_compile_definitions(${TARGET} PUBLIC + __SAME51J19A__ + SVC_Handler=SVCall_Handler + CONF_CPU_FREQUENCY=80000000 + CONF_GCLK_USB_FREQUENCY=48000000 + ) +endfunction() diff --git a/hw/bsp/samd51/boards/d5035_01/board.h b/hw/bsp/samd51/boards/d5035_01/board.h new file mode 100644 index 000000000..2cf59f5d1 --- /dev/null +++ b/hw/bsp/samd51/boards/d5035_01/board.h @@ -0,0 +1,198 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +// LED +#define LED_PIN PIN_PA02 +#define LED_STATE_ON 1 + +// Button: no button + +// UART: HWREV < 3: SERCOM5 on PB02, otherwise SERCOM0 on PA08 +// XTAL configure is also different for HWREV as well + +#if 0 +static inline void init_clock(void) { + /* AUTOWS is enabled by default in REG_NVMCTRL_CTRLA - no need to change the number of wait states when changing the core clock */ +#if HWREV == 1 + /* configure XOSC1 for a 16MHz crystal connected to XIN1/XOUT1 */ + OSCCTRL->XOSCCTRL[1].reg = + OSCCTRL_XOSCCTRL_STARTUP(6) | // 1,953 ms + OSCCTRL_XOSCCTRL_RUNSTDBY | + OSCCTRL_XOSCCTRL_ENALC | + OSCCTRL_XOSCCTRL_IMULT(4) | + OSCCTRL_XOSCCTRL_IPTAT(3) | + OSCCTRL_XOSCCTRL_XTALEN | + OSCCTRL_XOSCCTRL_ENABLE; + while(0 == OSCCTRL->STATUS.bit.XOSCRDY1); + + OSCCTRL->Dpll[0].DPLLCTRLB.reg = OSCCTRL_DPLLCTRLB_DIV(3) | OSCCTRL_DPLLCTRLB_REFCLK(OSCCTRL_DPLLCTRLB_REFCLK_XOSC1_Val); /* pre-scaler = 8, input = XOSC1 */ + OSCCTRL->Dpll[0].DPLLRATIO.reg = OSCCTRL_DPLLRATIO_LDRFRAC(0x0) | OSCCTRL_DPLLRATIO_LDR(39); /* multiply by 40 -> 80 MHz */ + OSCCTRL->Dpll[0].DPLLCTRLA.reg = OSCCTRL_DPLLCTRLA_RUNSTDBY | OSCCTRL_DPLLCTRLA_ENABLE; + while(0 == OSCCTRL->Dpll[0].DPLLSTATUS.bit.CLKRDY); /* wait for the PLL0 to be ready */ + + OSCCTRL->Dpll[1].DPLLCTRLB.reg = OSCCTRL_DPLLCTRLB_DIV(7) | OSCCTRL_DPLLCTRLB_REFCLK(OSCCTRL_DPLLCTRLB_REFCLK_XOSC1_Val); /* pre-scaler = 16, input = XOSC1 */ + OSCCTRL->Dpll[1].DPLLRATIO.reg = OSCCTRL_DPLLRATIO_LDRFRAC(0x0) | OSCCTRL_DPLLRATIO_LDR(47); /* multiply by 48 -> 48 MHz */ + OSCCTRL->Dpll[1].DPLLCTRLA.reg = OSCCTRL_DPLLCTRLA_RUNSTDBY | OSCCTRL_DPLLCTRLA_ENABLE; + while(0 == OSCCTRL->Dpll[1].DPLLSTATUS.bit.CLKRDY); /* wait for the PLL1 to be ready */ +#else // HWREV >= 1 + /* configure XOSC0 for a 16MHz crystal connected to XIN0/XOUT0 */ + OSCCTRL->XOSCCTRL[0].reg = + OSCCTRL_XOSCCTRL_STARTUP(6) | // 1,953 ms + OSCCTRL_XOSCCTRL_RUNSTDBY | + OSCCTRL_XOSCCTRL_ENALC | + OSCCTRL_XOSCCTRL_IMULT(4) | + OSCCTRL_XOSCCTRL_IPTAT(3) | + OSCCTRL_XOSCCTRL_XTALEN | + OSCCTRL_XOSCCTRL_ENABLE; + while (0 == OSCCTRL->STATUS.bit.XOSCRDY0); + + OSCCTRL->Dpll[0].DPLLCTRLB.reg = OSCCTRL_DPLLCTRLB_DIV(3) | OSCCTRL_DPLLCTRLB_REFCLK( + OSCCTRL_DPLLCTRLB_REFCLK_XOSC0_Val); /* pre-scaler = 8, input = XOSC1 */ + OSCCTRL->Dpll[0].DPLLRATIO.reg = + OSCCTRL_DPLLRATIO_LDRFRAC(0x0) | OSCCTRL_DPLLRATIO_LDR(39); /* multiply by 40 -> 80 MHz */ + OSCCTRL->Dpll[0].DPLLCTRLA.reg = OSCCTRL_DPLLCTRLA_RUNSTDBY | OSCCTRL_DPLLCTRLA_ENABLE; + while (0 == OSCCTRL->Dpll[0].DPLLSTATUS.bit.CLKRDY); /* wait for the PLL0 to be ready */ + + OSCCTRL->Dpll[1].DPLLCTRLB.reg = OSCCTRL_DPLLCTRLB_DIV(7) | OSCCTRL_DPLLCTRLB_REFCLK( + OSCCTRL_DPLLCTRLB_REFCLK_XOSC0_Val); /* pre-scaler = 16, input = XOSC1 */ + OSCCTRL->Dpll[1].DPLLRATIO.reg = + OSCCTRL_DPLLRATIO_LDRFRAC(0x0) | OSCCTRL_DPLLRATIO_LDR(47); /* multiply by 48 -> 48 MHz */ + OSCCTRL->Dpll[1].DPLLCTRLA.reg = OSCCTRL_DPLLCTRLA_RUNSTDBY | OSCCTRL_DPLLCTRLA_ENABLE; + while (0 == OSCCTRL->Dpll[1].DPLLSTATUS.bit.CLKRDY); /* wait for the PLL1 to be ready */ +#endif // HWREV + + /* configure clock-generator 0 to use DPLL0 as source -> GCLK0 is used for the core */ + GCLK->GENCTRL[0].reg = + GCLK_GENCTRL_DIV(0) | + GCLK_GENCTRL_RUNSTDBY | + GCLK_GENCTRL_GENEN | + GCLK_GENCTRL_SRC_DPLL0 | /* DPLL0 */ + GCLK_GENCTRL_IDC; + while (1 == GCLK->SYNCBUSY.bit.GENCTRL0); /* wait for the synchronization between clock domains to be complete */ + + /* configure clock-generator 1 to use DPLL1 as source -> for use with some peripheral */ + GCLK->GENCTRL[1].reg = + GCLK_GENCTRL_DIV(0) | + GCLK_GENCTRL_RUNSTDBY | + GCLK_GENCTRL_GENEN | + GCLK_GENCTRL_SRC_DPLL1 | + GCLK_GENCTRL_IDC; + while (1 == GCLK->SYNCBUSY.bit.GENCTRL1); /* wait for the synchronization between clock domains to be complete */ + + /* configure clock-generator 2 to use DPLL0 as source -> for use with SERCOM */ + GCLK->GENCTRL[2].reg = + GCLK_GENCTRL_DIV(1) | /* 80MHz */ + GCLK_GENCTRL_RUNSTDBY | + GCLK_GENCTRL_GENEN | + GCLK_GENCTRL_SRC_DPLL0 | + GCLK_GENCTRL_IDC; + while (1 == GCLK->SYNCBUSY.bit.GENCTRL2); /* wait for the synchronization between clock domains to be complete */ +} + +static inline void uart_init(void) { +#if HWREV < 3 + /* configure SERCOM5 on PB02 */ + PORT->Group[1].WRCONFIG.reg = + PORT_WRCONFIG_WRPINCFG | + PORT_WRCONFIG_WRPMUX | + PORT_WRCONFIG_PMUX(3) | /* function D */ + PORT_WRCONFIG_DRVSTR | + PORT_WRCONFIG_PINMASK(0x0004) | /* PB02 */ + PORT_WRCONFIG_PMUXEN; + + MCLK->APBDMASK.bit.SERCOM5_ = 1; + GCLK->PCHCTRL[SERCOM5_GCLK_ID_CORE].reg = + GCLK_PCHCTRL_GEN_GCLK2 | GCLK_PCHCTRL_CHEN; /* setup SERCOM to use GLCK2 -> 80MHz */ + + SERCOM5->USART.CTRLA.reg = 0x00; /* disable SERCOM -> enable config */ + while (SERCOM5->USART.SYNCBUSY.bit.ENABLE); + + SERCOM5->USART.CTRLA.reg = /* CMODE = 0 -> async, SAMPA = 0, FORM = 0 -> USART frame, SMPR = 0 -> arithmetic baud rate */ + SERCOM_USART_CTRLA_SAMPR(1) | /* 0 = 16x / arithmetic baud rate, 1 = 16x / fractional baud rate */ + // SERCOM_USART_CTRLA_FORM(0) | /* 0 = USART Frame, 2 = LIN Master */ + SERCOM_USART_CTRLA_DORD | /* LSB first */ + SERCOM_USART_CTRLA_MODE(1) | /* 0 = Asynchronous, 1 = USART with internal clock */ + SERCOM_USART_CTRLA_RXPO(1) | /* SERCOM PAD[1] is used for data reception */ + SERCOM_USART_CTRLA_TXPO(0); /* SERCOM PAD[0] is used for data transmission */ + + SERCOM5->USART.CTRLB.reg = /* RXEM = 0 -> receiver disabled, LINCMD = 0 -> normal USART transmission, SFDE = 0 -> start-of-frame detection disabled, SBMODE = 0 -> one stop bit, CHSIZE = 0 -> 8 bits */ + SERCOM_USART_CTRLB_TXEN; /* transmitter enabled */ + SERCOM5->USART.CTRLC.reg = 0x00; + // 21.701388889 @ baud rate of 230400 bit/s, table 33-2, p 918 of DS60001507E + SERCOM5->USART.BAUD.reg = SERCOM_USART_BAUD_FRAC_FP(7) | SERCOM_USART_BAUD_FRAC_BAUD(21); + +// SERCOM5->USART.INTENSET.reg = SERCOM_USART_INTENSET_TXC; + SERCOM5->SPI.CTRLA.bit.ENABLE = 1; /* activate SERCOM */ + while (SERCOM5->USART.SYNCBUSY.bit.ENABLE); /* wait for SERCOM to be ready */ +#else + /* configure SERCOM0 on PA08 */ + PORT->Group[0].WRCONFIG.reg = + PORT_WRCONFIG_WRPINCFG | + PORT_WRCONFIG_WRPMUX | + PORT_WRCONFIG_PMUX(2) | /* function C */ + PORT_WRCONFIG_DRVSTR | + PORT_WRCONFIG_PINMASK(0x0100) | /* PA08 */ + PORT_WRCONFIG_PMUXEN; + + MCLK->APBAMASK.bit.SERCOM0_ = 1; + GCLK->PCHCTRL[SERCOM0_GCLK_ID_CORE].reg = GCLK_PCHCTRL_GEN_GCLK2 | GCLK_PCHCTRL_CHEN; /* setup SERCOM to use GLCK2 -> 80MHz */ + + SERCOM0->USART.CTRLA.reg = 0x00; /* disable SERCOM -> enable config */ + while(SERCOM0->USART.SYNCBUSY.bit.ENABLE); + + SERCOM0->USART.CTRLA.reg = /* CMODE = 0 -> async, SAMPA = 0, FORM = 0 -> USART frame, SMPR = 0 -> arithmetic baud rate */ + SERCOM_USART_CTRLA_SAMPR(1) | /* 0 = 16x / arithmetic baud rate, 1 = 16x / fractional baud rate */ + // SERCOM_USART_CTRLA_FORM(0) | /* 0 = USART Frame, 2 = LIN Master */ + SERCOM_USART_CTRLA_DORD | /* LSB first */ + SERCOM_USART_CTRLA_MODE(1) | /* 0 = Asynchronous, 1 = USART with internal clock */ + SERCOM_USART_CTRLA_RXPO(1) | /* SERCOM PAD[1] is used for data reception */ + SERCOM_USART_CTRLA_TXPO(0); /* SERCOM PAD[0] is used for data transmission */ + + SERCOM0->USART.CTRLB.reg = /* RXEM = 0 -> receiver disabled, LINCMD = 0 -> normal USART transmission, SFDE = 0 -> start-of-frame detection disabled, SBMODE = 0 -> one stop bit, CHSIZE = 0 -> 8 bits */ + SERCOM_USART_CTRLB_TXEN; /* transmitter enabled */ + SERCOM0->USART.CTRLC.reg = 0x00; + // 21.701388889 @ baud rate of 230400 bit/s, table 33-2, p 918 of DS60001507E + SERCOM0->USART.BAUD.reg = SERCOM_USART_BAUD_FRAC_FP(7) | SERCOM_USART_BAUD_FRAC_BAUD(21); + + // SERCOM0->USART.INTENSET.reg = SERCOM_USART_INTENSET_TXC; + SERCOM0->SPI.CTRLA.bit.ENABLE = 1; /* activate SERCOM */ + while(SERCOM0->USART.SYNCBUSY.bit.ENABLE); /* wait for SERCOM to be ready */ +#endif +} +#endif + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/samd51/boards/d5035_01/board.mk b/hw/bsp/samd51/boards/d5035_01/board.mk new file mode 100644 index 000000000..4aa6b89fe --- /dev/null +++ b/hw/bsp/samd51/boards/d5035_01/board.mk @@ -0,0 +1,21 @@ +SAM_FAMILY = same51 + +HWREV ?= 1 + +CFLAGS += \ + -D__SAME51J19A__ \ + -DCONF_CPU_FREQUENCY=80000000 \ + -DCONF_GCLK_USB_FREQUENCY=48000000 \ + -DD5035_01=1 \ + -DBOARD_NAME="\"D5035-01\"" \ + -DSVC_Handler=SVCall_Handler \ + -DHWREV=$(HWREV) + +# All source paths should be relative to the top level. +LD_FILE = $(BOARD_PATH)/same51j19a_flash.ld + +# For flash-jlink target +JLINK_DEVICE = ATSAME51J19 + +# flash using jlink +flash: flash-jlink diff --git a/hw/bsp/samd51/boards/d5035_01/same51j19a_flash.ld b/hw/bsp/samd51/boards/d5035_01/same51j19a_flash.ld new file mode 100644 index 000000000..59afb604b --- /dev/null +++ b/hw/bsp/samd51/boards/d5035_01/same51j19a_flash.ld @@ -0,0 +1,166 @@ +/** + * \file + * + * \brief Linker script for running in internal FLASH on the SAME51J19A + * + * Copyright (c) 2019 Microchip Technology Inc. + * + * \asf_license_start + * + * \page License + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the Licence at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * \asf_license_stop + * + */ + + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +SEARCH_DIR(.) + +/* Memory Spaces Definitions */ +MEMORY +{ + rom (rx) : ORIGIN = 0x00000000, LENGTH = 0x00080000 + ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00030000 + bkupram (rwx) : ORIGIN = 0x47000000, LENGTH = 0x00002000 + qspi (rwx) : ORIGIN = 0x04000000, LENGTH = 0x01000000 +} + +/* The stack size used by the application. NOTE: you need to adjust according to your application. */ +STACK_SIZE = DEFINED(__stack_size__) ? __stack_size__ : 0x1000; + +ENTRY(Reset_Handler) + +/* Section Definitions */ +SECTIONS +{ + .text : + { + . = ALIGN(4); + _sfixed = .; + KEEP(*(.vectors .vectors.*)) + *(.text .text.* .gnu.linkonce.t.*) + *(.glue_7t) *(.glue_7) + *(.rodata .rodata* .gnu.linkonce.r.*) + *(.ARM.extab* .gnu.linkonce.armextab.*) + + /* Support C constructors, and C destructors in both user code + and the C library. This also provides support for C++ code. */ + . = ALIGN(4); + KEEP(*(.init)) + . = ALIGN(4); + __preinit_array_start = .; + KEEP (*(.preinit_array)) + __preinit_array_end = .; + + . = ALIGN(4); + __init_array_start = .; + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array)) + __init_array_end = .; + + . = ALIGN(4); + KEEP (*crtbegin.o(.ctors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) + KEEP (*(SORT(.ctors.*))) + KEEP (*crtend.o(.ctors)) + + . = ALIGN(4); + KEEP(*(.fini)) + + . = ALIGN(4); + __fini_array_start = .; + KEEP (*(.fini_array)) + KEEP (*(SORT(.fini_array.*))) + __fini_array_end = .; + + KEEP (*crtbegin.o(.dtors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) + KEEP (*(SORT(.dtors.*))) + KEEP (*crtend.o(.dtors)) + + . = ALIGN(4); + _efixed = .; /* End of text section */ + } > rom + + /* .ARM.exidx is sorted, so has to go in its own output section. */ + PROVIDE_HIDDEN (__exidx_start = .); + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > rom + PROVIDE_HIDDEN (__exidx_end = .); + + . = ALIGN(4); + _etext = .; + + .relocate : AT (_etext) + { + . = ALIGN(4); + _srelocate = .; + *(.ramfunc .ramfunc.*); + *(.data .data.*); + . = ALIGN(4); + _erelocate = .; + } > ram + + .bkupram (NOLOAD): + { + . = ALIGN(8); + _sbkupram = .; + *(.bkupram .bkupram.*); + . = ALIGN(8); + _ebkupram = .; + } > bkupram + + .qspi (NOLOAD): + { + . = ALIGN(8); + _sqspi = .; + *(.qspi .qspi.*); + . = ALIGN(8); + _eqspi = .; + } > qspi + + /* .bss section which is used for uninitialized data */ + .bss (NOLOAD) : + { + . = ALIGN(4); + _sbss = . ; + _szero = .; + *(.bss .bss.*) + *(COMMON) + . = ALIGN(4); + _ebss = . ; + _ezero = .; + } > ram + + /* stack section */ + .stack (NOLOAD): + { + . = ALIGN(8); + _sstack = .; + . = . + STACK_SIZE; + . = ALIGN(8); + _estack = .; + } > ram + + . = ALIGN(4); + _end = . ; + end = .; +} diff --git a/hw/bsp/samd51/boards/feather_m4_express/board.cmake b/hw/bsp/samd51/boards/feather_m4_express/board.cmake index d83211d9e..86d12ca24 100644 --- a/hw/bsp/samd51/boards/feather_m4_express/board.cmake +++ b/hw/bsp/samd51/boards/feather_m4_express/board.cmake @@ -1,3 +1,5 @@ +set(SAM_FAMILY samd51) + set(JLINK_DEVICE ATSAMD51J19) set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/${BOARD}.ld) diff --git a/hw/bsp/samd51/boards/feather_m4_express/board.mk b/hw/bsp/samd51/boards/feather_m4_express/board.mk index a8a98a987..811c5f4e3 100644 --- a/hw/bsp/samd51/boards/feather_m4_express/board.mk +++ b/hw/bsp/samd51/boards/feather_m4_express/board.mk @@ -1,3 +1,5 @@ +SAM_FAMILY = samd51 + CFLAGS += -D__SAMD51J19A__ LD_FILE = $(BOARD_PATH)/$(BOARD).ld diff --git a/hw/bsp/samd51/boards/itsybitsy_m4/board.cmake b/hw/bsp/samd51/boards/itsybitsy_m4/board.cmake index d83211d9e..86d12ca24 100644 --- a/hw/bsp/samd51/boards/itsybitsy_m4/board.cmake +++ b/hw/bsp/samd51/boards/itsybitsy_m4/board.cmake @@ -1,3 +1,5 @@ +set(SAM_FAMILY samd51) + set(JLINK_DEVICE ATSAMD51J19) set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/${BOARD}.ld) diff --git a/hw/bsp/samd51/boards/itsybitsy_m4/board.mk b/hw/bsp/samd51/boards/itsybitsy_m4/board.mk index 57a680e91..eba7070c1 100644 --- a/hw/bsp/samd51/boards/itsybitsy_m4/board.mk +++ b/hw/bsp/samd51/boards/itsybitsy_m4/board.mk @@ -1,3 +1,5 @@ +SAM_FAMILY = samd51 + CFLAGS += -D__SAMD51J19A__ # All source paths should be relative to the top level. diff --git a/hw/bsp/samd51/boards/metro_m4_express/board.cmake b/hw/bsp/samd51/boards/metro_m4_express/board.cmake index d83211d9e..86d12ca24 100644 --- a/hw/bsp/samd51/boards/metro_m4_express/board.cmake +++ b/hw/bsp/samd51/boards/metro_m4_express/board.cmake @@ -1,3 +1,5 @@ +set(SAM_FAMILY samd51) + set(JLINK_DEVICE ATSAMD51J19) set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/${BOARD}.ld) diff --git a/hw/bsp/samd51/boards/metro_m4_express/board.mk b/hw/bsp/samd51/boards/metro_m4_express/board.mk index 57a680e91..eba7070c1 100644 --- a/hw/bsp/samd51/boards/metro_m4_express/board.mk +++ b/hw/bsp/samd51/boards/metro_m4_express/board.mk @@ -1,3 +1,5 @@ +SAM_FAMILY = samd51 + CFLAGS += -D__SAMD51J19A__ # All source paths should be relative to the top level. diff --git a/hw/bsp/samd51/boards/pybadge/board.cmake b/hw/bsp/samd51/boards/pybadge/board.cmake index d83211d9e..86d12ca24 100644 --- a/hw/bsp/samd51/boards/pybadge/board.cmake +++ b/hw/bsp/samd51/boards/pybadge/board.cmake @@ -1,3 +1,5 @@ +set(SAM_FAMILY samd51) + set(JLINK_DEVICE ATSAMD51J19) set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/${BOARD}.ld) diff --git a/hw/bsp/samd51/boards/pybadge/board.mk b/hw/bsp/samd51/boards/pybadge/board.mk index a8a98a987..811c5f4e3 100644 --- a/hw/bsp/samd51/boards/pybadge/board.mk +++ b/hw/bsp/samd51/boards/pybadge/board.mk @@ -1,3 +1,5 @@ +SAM_FAMILY = samd51 + CFLAGS += -D__SAMD51J19A__ LD_FILE = $(BOARD_PATH)/$(BOARD).ld diff --git a/hw/bsp/samd51/boards/pyportal/board.cmake b/hw/bsp/samd51/boards/pyportal/board.cmake index d83211d9e..86d12ca24 100644 --- a/hw/bsp/samd51/boards/pyportal/board.cmake +++ b/hw/bsp/samd51/boards/pyportal/board.cmake @@ -1,3 +1,5 @@ +set(SAM_FAMILY samd51) + set(JLINK_DEVICE ATSAMD51J19) set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/${BOARD}.ld) diff --git a/hw/bsp/samd51/boards/pyportal/board.mk b/hw/bsp/samd51/boards/pyportal/board.mk index a8a98a987..811c5f4e3 100644 --- a/hw/bsp/samd51/boards/pyportal/board.mk +++ b/hw/bsp/samd51/boards/pyportal/board.mk @@ -1,3 +1,5 @@ +SAM_FAMILY = samd51 + CFLAGS += -D__SAMD51J19A__ LD_FILE = $(BOARD_PATH)/$(BOARD).ld diff --git a/hw/bsp/samd51/boards/same54_xplained/board.cmake b/hw/bsp/samd51/boards/same54_xplained/board.cmake new file mode 100644 index 000000000..4d98205bc --- /dev/null +++ b/hw/bsp/samd51/boards/same54_xplained/board.cmake @@ -0,0 +1,10 @@ +set(SAM_FAMILY same54) + +set(JLINK_DEVICE ATSAME54P20) +set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/same54p20a_flash.ld) + +function(update_board TARGET) + target_compile_definitions(${TARGET} PUBLIC + __SAME54P20A__ + ) +endfunction() diff --git a/hw/bsp/samd51/boards/same54_xplained/board.h b/hw/bsp/samd51/boards/same54_xplained/board.h new file mode 100644 index 000000000..faaa52b8e --- /dev/null +++ b/hw/bsp/samd51/boards/same54_xplained/board.h @@ -0,0 +1,50 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +// LED +#define LED_PIN PIN_PC18 +#define LED_STATE_ON 1 + +// Button: D5 +#define BUTTON_PIN PIN_PB31 +#define BUTTON_STATE_ACTIVE 0 + +// UART: SERCOM2 +//#define UART_TX_PIN 23 +//#define UART_RX_PIN 22 + +#ifdef __cplusplus + } +#endif + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/samd51/boards/same54_xplained/board.mk b/hw/bsp/samd51/boards/same54_xplained/board.mk new file mode 100644 index 000000000..d10e9e34c --- /dev/null +++ b/hw/bsp/samd51/boards/same54_xplained/board.mk @@ -0,0 +1,9 @@ +SAM_FAMILY = same54 + +CFLAGS += -D__SAME54P20A__ + +# All source paths should be relative to the top level. +LD_FILE = $(BOARD_PATH)/same54p20a_flash.ld + +# For flash-jlink target +JLINK_DEVICE = ATSAME54P20 diff --git a/hw/bsp/samd51/boards/same54_xplained/same54p20a_flash.ld b/hw/bsp/samd51/boards/same54_xplained/same54p20a_flash.ld new file mode 100644 index 000000000..8a9fd7d9f --- /dev/null +++ b/hw/bsp/samd51/boards/same54_xplained/same54p20a_flash.ld @@ -0,0 +1,166 @@ +/** + * \file + * + * \brief Linker script for running in internal FLASH on the SAME54P20A + * + * Copyright (c) 2019 Microchip Technology Inc. + * + * \asf_license_start + * + * \page License + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the Licence at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * \asf_license_stop + * + */ + + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +SEARCH_DIR(.) + +/* Memory Spaces Definitions */ +MEMORY +{ + rom (rx) : ORIGIN = 0x00000000, LENGTH = 0x00100000 + ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00040000 + bkupram (rwx) : ORIGIN = 0x47000000, LENGTH = 0x00002000 + qspi (rwx) : ORIGIN = 0x04000000, LENGTH = 0x01000000 +} + +/* The stack size used by the application. NOTE: you need to adjust according to your application. */ +STACK_SIZE = DEFINED(__stack_size__) ? __stack_size__ : 0x10000; + +ENTRY(Reset_Handler) + +/* Section Definitions */ +SECTIONS +{ + .text : + { + . = ALIGN(4); + _sfixed = .; + KEEP(*(.vectors .vectors.*)) + *(.text .text.* .gnu.linkonce.t.*) + *(.glue_7t) *(.glue_7) + *(.rodata .rodata* .gnu.linkonce.r.*) + *(.ARM.extab* .gnu.linkonce.armextab.*) + + /* Support C constructors, and C destructors in both user code + and the C library. This also provides support for C++ code. */ + . = ALIGN(4); + KEEP(*(.init)) + . = ALIGN(4); + __preinit_array_start = .; + KEEP (*(.preinit_array)) + __preinit_array_end = .; + + . = ALIGN(4); + __init_array_start = .; + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array)) + __init_array_end = .; + + . = ALIGN(4); + KEEP (*crtbegin.o(.ctors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) + KEEP (*(SORT(.ctors.*))) + KEEP (*crtend.o(.ctors)) + + . = ALIGN(4); + KEEP(*(.fini)) + + . = ALIGN(4); + __fini_array_start = .; + KEEP (*(.fini_array)) + KEEP (*(SORT(.fini_array.*))) + __fini_array_end = .; + + KEEP (*crtbegin.o(.dtors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) + KEEP (*(SORT(.dtors.*))) + KEEP (*crtend.o(.dtors)) + + . = ALIGN(4); + _efixed = .; /* End of text section */ + } > rom + + /* .ARM.exidx is sorted, so has to go in its own output section. */ + PROVIDE_HIDDEN (__exidx_start = .); + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > rom + PROVIDE_HIDDEN (__exidx_end = .); + + . = ALIGN(4); + _etext = .; + + .relocate : AT (_etext) + { + . = ALIGN(4); + _srelocate = .; + *(.ramfunc .ramfunc.*); + *(.data .data.*); + . = ALIGN(4); + _erelocate = .; + } > ram + + .bkupram (NOLOAD): + { + . = ALIGN(8); + _sbkupram = .; + *(.bkupram .bkupram.*); + . = ALIGN(8); + _ebkupram = .; + } > bkupram + + .qspi (NOLOAD): + { + . = ALIGN(8); + _sqspi = .; + *(.qspi .qspi.*); + . = ALIGN(8); + _eqspi = .; + } > qspi + + /* .bss section which is used for uninitialized data */ + .bss (NOLOAD) : + { + . = ALIGN(4); + _sbss = . ; + _szero = .; + *(.bss .bss.*) + *(COMMON) + . = ALIGN(4); + _ebss = . ; + _ezero = .; + } > ram + + /* stack section */ + .stack (NOLOAD): + { + . = ALIGN(8); + _sstack = .; + . = . + STACK_SIZE; + . = ALIGN(8); + _estack = .; + } > ram + + . = ALIGN(4); + _end = . ; + end = .; +} diff --git a/hw/bsp/samd51/boards/same54_xplained/same54p20a_sram.ld b/hw/bsp/samd51/boards/same54_xplained/same54p20a_sram.ld new file mode 100644 index 000000000..c88617729 --- /dev/null +++ b/hw/bsp/samd51/boards/same54_xplained/same54p20a_sram.ld @@ -0,0 +1,165 @@ +/** + * \file + * + * \brief Linker script for running in internal SRAM on the SAME54P20A + * + * Copyright (c) 2019 Microchip Technology Inc. + * + * \asf_license_start + * + * \page License + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the Licence at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * \asf_license_stop + * + */ + + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +SEARCH_DIR(.) + +/* Memory Spaces Definitions */ +MEMORY +{ + ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00040000 + bkupram (rwx) : ORIGIN = 0x47000000, LENGTH = 0x00002000 + qspi (rwx) : ORIGIN = 0x04000000, LENGTH = 0x01000000 +} + +/* The stack size used by the application. NOTE: you need to adjust according to your application. */ +STACK_SIZE = DEFINED(__stack_size__) ? __stack_size__ : 0x10000; + +ENTRY(Reset_Handler) + +/* Section Definitions */ +SECTIONS +{ + .text : + { + . = ALIGN(4); + _sfixed = .; + KEEP(*(.vectors .vectors.*)) + *(.text .text.* .gnu.linkonce.t.*) + *(.glue_7t) *(.glue_7) + *(.rodata .rodata* .gnu.linkonce.r.*) + *(.ARM.extab* .gnu.linkonce.armextab.*) + + /* Support C constructors, and C destructors in both user code + and the C library. This also provides support for C++ code. */ + . = ALIGN(4); + KEEP(*(.init)) + . = ALIGN(4); + __preinit_array_start = .; + KEEP (*(.preinit_array)) + __preinit_array_end = .; + + . = ALIGN(4); + __init_array_start = .; + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array)) + __init_array_end = .; + + . = ALIGN(4); + KEEP (*crtbegin.o(.ctors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) + KEEP (*(SORT(.ctors.*))) + KEEP (*crtend.o(.ctors)) + + . = ALIGN(4); + KEEP(*(.fini)) + + . = ALIGN(4); + __fini_array_start = .; + KEEP (*(.fini_array)) + KEEP (*(SORT(.fini_array.*))) + __fini_array_end = .; + + KEEP (*crtbegin.o(.dtors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) + KEEP (*(SORT(.dtors.*))) + KEEP (*crtend.o(.dtors)) + + . = ALIGN(4); + _efixed = .; /* End of text section */ + } > ram + + /* .ARM.exidx is sorted, so has to go in its own output section. */ + PROVIDE_HIDDEN (__exidx_start = .); + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > ram + PROVIDE_HIDDEN (__exidx_end = .); + + . = ALIGN(4); + _etext = .; + + .relocate : AT (_etext) + { + . = ALIGN(4); + _srelocate = .; + *(.ramfunc .ramfunc.*); + *(.data .data.*); + . = ALIGN(4); + _erelocate = .; + } > ram + + .bkupram (NOLOAD): + { + . = ALIGN(8); + _sbkupram = .; + *(.bkupram .bkupram.*); + . = ALIGN(8); + _ebkupram = .; + } > bkupram + + .qspi (NOLOAD): + { + . = ALIGN(8); + _sqspi = .; + *(.qspi .qspi.*); + . = ALIGN(8); + _eqspi = .; + } > qspi + + /* .bss section which is used for uninitialized data */ + .bss (NOLOAD) : + { + . = ALIGN(4); + _sbss = . ; + _szero = .; + *(.bss .bss.*) + *(COMMON) + . = ALIGN(4); + _ebss = . ; + _ezero = .; + } > ram + + /* stack section */ + .stack (NOLOAD): + { + . = ALIGN(8); + _sstack = .; + . = . + STACK_SIZE; + . = ALIGN(8); + _estack = .; + } > ram + + . = ALIGN(4); + _end = . ; + end = .; +} diff --git a/hw/bsp/samd51/family.c b/hw/bsp/samd51/family.c index d56d9f695..abaee353b 100644 --- a/hw/bsp/samd51/family.c +++ b/hw/bsp/samd51/family.c @@ -34,8 +34,8 @@ #pragma GCC diagnostic ignored "-Wcast-qual" #endif -#include "hal/include/hal_gpio.h" -#include "hal/include/hal_init.h" +#include "hal_gpio.h" +#include "hal_init.h" #include "hpl/gclk/hpl_gclk_base.h" #include "hpl_mclk_config.h" @@ -106,9 +106,11 @@ void board_init(void) { gpio_set_pin_direction(LED_PIN, GPIO_DIRECTION_OUT); gpio_set_pin_level(LED_PIN, 0); +#ifdef BUTTON_PIN // Button init gpio_set_pin_direction(BUTTON_PIN, GPIO_DIRECTION_IN); gpio_set_pin_pull_mode(BUTTON_PIN, GPIO_PULL_UP); +#endif #if CFG_TUSB_OS == OPT_OS_FREERTOS // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) @@ -154,7 +156,11 @@ void board_led_write(bool state) { uint32_t board_button_read(void) { // button is active low + #ifdef BUTTON_PIN return gpio_get_pin_level(BUTTON_PIN) ? 0 : 1; + #else + return 0; + #endif } size_t board_get_unique_id(uint8_t id[], size_t max_len) { @@ -194,6 +200,53 @@ uint32_t board_millis(void) { return system_ticks; } +#if 0 +/* Initialize SERCOM2 for 115200 bps 8N1 using a 48 MHz clock */ +static inline void uart_init(void) { + gpio_set_pin_function(PIN_PB24, PINMUX_PB24D_SERCOM2_PAD1); + gpio_set_pin_function(PIN_PB25, PINMUX_PB25D_SERCOM2_PAD0); + + MCLK->APBBMASK.bit.SERCOM2_ = 1; + GCLK->PCHCTRL[SERCOM2_GCLK_ID_CORE].reg = GCLK_PCHCTRL_GEN_GCLK0 | GCLK_PCHCTRL_CHEN; + + BOARD_SERCOM->USART.CTRLA.bit.SWRST = 1; /* reset and disable SERCOM -> enable configuration */ + while (BOARD_SERCOM->USART.SYNCBUSY.bit.SWRST); + + BOARD_SERCOM->USART.CTRLA.reg = + SERCOM_USART_CTRLA_SAMPR(0) | /* 0 = 16x / arithmetic baud rate, 1 = 16x / fractional baud rate */ + SERCOM_USART_CTRLA_SAMPA(0) | /* 16x over sampling */ + SERCOM_USART_CTRLA_FORM(0) | /* 0x0 USART frame, 0x1 USART frame with parity, ... */ + SERCOM_USART_CTRLA_DORD | /* LSB first */ + SERCOM_USART_CTRLA_MODE(1) | /* 0x0 USART with external clock, 0x1 USART with internal clock */ + SERCOM_USART_CTRLA_RXPO(1) | /* SERCOM PAD[1] is used for data reception */ + SERCOM_USART_CTRLA_TXPO(0); /* SERCOM PAD[0] is used for data transmission */ + + BOARD_SERCOM->USART.CTRLB.reg = /* RXEM = 0 -> receiver disabled, LINCMD = 0 -> normal USART transmission, SFDE = 0 -> start-of-frame detection disabled, SBMODE = 0 -> one stop bit, CHSIZE = 0 -> 8 bits */ + SERCOM_USART_CTRLB_TXEN | /* transmitter enabled */ + SERCOM_USART_CTRLB_RXEN; /* receiver enabled */ + // BOARD_SERCOM->USART.BAUD.reg = SERCOM_USART_BAUD_FRAC_FP(0) | SERCOM_USART_BAUD_FRAC_BAUD(26); /* 48000000/(16*115200) = 26.041666667 */ + BOARD_SERCOM->USART.BAUD.reg = SERCOM_USART_BAUD_BAUD(63019); /* 65536*(1−16*115200/48000000) */ + + BOARD_SERCOM->USART.CTRLA.bit.ENABLE = 1; /* activate SERCOM */ + while (BOARD_SERCOM->USART.SYNCBUSY.bit.ENABLE); /* wait for SERCOM to be ready */ +} + +static inline void uart_send_buffer(uint8_t const* text, size_t len) { + for (size_t i = 0; i < len; ++i) { + BOARD_SERCOM->USART.DATA.reg = text[i]; + while ((BOARD_SERCOM->USART.INTFLAG.reg & SERCOM_USART_INTFLAG_TXC) == 0); + } +} + +static inline void uart_send_str(const char* text) { + while (*text) { + BOARD_SERCOM->USART.DATA.reg = *text++; + while ((BOARD_SERCOM->USART.INTFLAG.reg & SERCOM_USART_INTFLAG_TXC) == 0); + } +} + +#endif + #endif //--------------------------------------------------------------------+ diff --git a/hw/bsp/samd51/family.cmake b/hw/bsp/samd51/family.cmake index 3ddd2e290..6d64a5fe4 100644 --- a/hw/bsp/samd51/family.cmake +++ b/hw/bsp/samd51/family.cmake @@ -1,16 +1,15 @@ include_guard() -set(SDK_DIR ${TOP}/hw/mcu/microchip/samd51) -set(CMSIS_5 ${TOP}/lib/CMSIS_5) - -# include board specific include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) +set(SDK_DIR ${TOP}/hw/mcu/microchip/${SAM_FAMILY}) +set(CMSIS_5 ${TOP}/lib/CMSIS_5) + # toolchain set up set(CMAKE_SYSTEM_PROCESSOR cortex-m4 CACHE INTERNAL "System Processor") set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) -set(FAMILY_MCUS SAMD51 CACHE INTERNAL "") +set(FAMILY_MCUS SAMD51 SAME54 CACHE INTERNAL "") set(OPENOCD_OPTION "-f interface/cmsis-dap.cfg -c \"transport select swd\" -c \"set CHIPNAME samd51\" -f target/atsame5x.cfg") #------------------------------------ @@ -27,22 +26,20 @@ function(add_board_target BOARD_TARGET) message(FATAL_ERROR "LD_FILE_${CMAKE_C_COMPILER_ID} not defined") endif () - if (NOT DEFINED STARTUP_FILE_GNU) - set(STARTUP_FILE_GNU ${SDK_DIR}/gcc/gcc/startup_samd51.c) - endif () + set(STARTUP_FILE_GNU ${SDK_DIR}/gcc/gcc/startup_${SAM_FAMILY}.c) set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) add_library(${BOARD_TARGET} STATIC - ${SDK_DIR}/gcc/system_samd51.c + ${SDK_DIR}/gcc/system_${SAM_FAMILY}.c + ${SDK_DIR}/hal/src/hal_atomic.c ${SDK_DIR}/hpl/gclk/hpl_gclk.c ${SDK_DIR}/hpl/mclk/hpl_mclk.c ${SDK_DIR}/hpl/osc32kctrl/hpl_osc32kctrl.c ${SDK_DIR}/hpl/oscctrl/hpl_oscctrl.c - ${SDK_DIR}/hal/src/hal_atomic.c ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} ) target_include_directories(${BOARD_TARGET} PUBLIC - ${SDK_DIR}/ + ${SDK_DIR} ${SDK_DIR}/config ${SDK_DIR}/include ${SDK_DIR}/hal/include diff --git a/hw/bsp/samd51/family.mk b/hw/bsp/samd51/family.mk index 7b90efad0..9b1a23db4 100644 --- a/hw/bsp/samd51/family.mk +++ b/hw/bsp/samd51/family.mk @@ -1,9 +1,10 @@ UF2_FAMILY_ID = 0x55114460 -DEPS_SUBMODULES += hw/mcu/microchip include $(TOP)/$(BOARD_PATH)/board.mk CPU_CORE ?= cortex-m4 +SDK_DIR = hw/mcu/microchip/${SAM_FAMILY} + CFLAGS += \ -flto \ -DCFG_TUSB_MCU=OPT_MCU_SAMD51 @@ -17,23 +18,23 @@ LDFLAGS_GCC += \ SRC_C += \ src/portable/microchip/samd/dcd_samd.c \ - hw/mcu/microchip/samd51/gcc/gcc/startup_samd51.c \ - hw/mcu/microchip/samd51/gcc/system_samd51.c \ - hw/mcu/microchip/samd51/hpl/gclk/hpl_gclk.c \ - hw/mcu/microchip/samd51/hpl/mclk/hpl_mclk.c \ - hw/mcu/microchip/samd51/hpl/osc32kctrl/hpl_osc32kctrl.c \ - hw/mcu/microchip/samd51/hpl/oscctrl/hpl_oscctrl.c \ - hw/mcu/microchip/samd51/hal/src/hal_atomic.c + ${SDK_DIR}/gcc/gcc/startup_${SAM_FAMILY}.c \ + ${SDK_DIR}/gcc/system_${SAM_FAMILY}.c \ + ${SDK_DIR}/hpl/gclk/hpl_gclk.c \ + ${SDK_DIR}/hpl/mclk/hpl_mclk.c \ + ${SDK_DIR}/hpl/osc32kctrl/hpl_osc32kctrl.c \ + ${SDK_DIR}/hpl/oscctrl/hpl_oscctrl.c \ + ${SDK_DIR}/hal/src/hal_atomic.c INC += \ $(TOP)/$(BOARD_PATH) \ - $(TOP)/hw/mcu/microchip/samd51/ \ - $(TOP)/hw/mcu/microchip/samd51/config \ - $(TOP)/hw/mcu/microchip/samd51/include \ - $(TOP)/hw/mcu/microchip/samd51/hal/include \ - $(TOP)/hw/mcu/microchip/samd51/hal/utils/include \ - $(TOP)/hw/mcu/microchip/samd51/hpl/port \ - $(TOP)/hw/mcu/microchip/samd51/hri \ + $(TOP)/${SDK_DIR} \ + $(TOP)/${SDK_DIR}/config \ + $(TOP)/${SDK_DIR}/include \ + $(TOP)/${SDK_DIR}/hal/include \ + $(TOP)/${SDK_DIR}/hal/utils/include \ + $(TOP)/${SDK_DIR}/hpl/port \ + $(TOP)/${SDK_DIR}/hri \ $(TOP)/lib/CMSIS_5/CMSIS/Core/Include \ # flash using bossac at least version 1.8 @@ -44,3 +45,7 @@ BOSSAC = bossac flash-bossac: $(BUILD)/$(PROJECT).bin @:$(call check_defined, SERIAL, example: SERIAL=/dev/ttyACM0) $(BOSSAC) --port=$(SERIAL) -U -i --offset=0x4000 -e -w $^ -R + +# flash using edbg from https://github.com/ataradov/edbg +flash-edbg: $(BUILD)/$(PROJECT).bin + edbg --verbose -t $(MCU) -pv -f $< diff --git a/hw/bsp/same5x/boards/d5035_01/board.mk b/hw/bsp/same5x/boards/d5035_01/board.mk deleted file mode 100644 index c53411bb8..000000000 --- a/hw/bsp/same5x/boards/d5035_01/board.mk +++ /dev/null @@ -1,21 +0,0 @@ -MCU = same51 - -HWREV ?= 1 - -CFLAGS += \ - -D__SAME51J19A__ \ - -DCONF_CPU_FREQUENCY=80000000 \ - -DCONF_GCLK_USB_FREQUENCY=48000000 \ - -DD5035_01=1 \ - -DBOARD_NAME="\"D5035-01\"" \ - -DSVC_Handler=SVCall_Handler \ - -DHWREV=$(HWREV) - -# All source paths should be relative to the top level. -LD_FILE = $(BOARD_PATH)/same51j19a_flash.ld - -# For flash-jlink target -JLINK_DEVICE = ATSAME51J19 - -# flash using jlink -flash: flash-jlink diff --git a/hw/bsp/same5x/boards/d5035_01/d5035_01.c b/hw/bsp/same5x/boards/d5035_01/d5035_01.c deleted file mode 100644 index eb5768d0d..000000000 --- a/hw/bsp/same5x/boards/d5035_01/d5035_01.c +++ /dev/null @@ -1,353 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2020 Jean Gressmann - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - */ - -#include -#include "bsp/board_api.h" - -#include - -#if CONF_CPU_FREQUENCY != 80000000 -# error "CONF_CPU_FREQUENCY" must 80000000 -#endif - -#if CONF_GCLK_USB_FREQUENCY != 48000000 -# error "CONF_GCLK_USB_FREQUENCY" must 48000000 -#endif - -#if !defined(HWREV) -# error Define "HWREV" -#endif - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ -void USB_0_Handler (void) -{ - tud_int_handler(0); -} - -void USB_1_Handler (void) -{ - tud_int_handler(0); -} - -void USB_2_Handler (void) -{ - tud_int_handler(0); -} - -void USB_3_Handler (void) -{ - tud_int_handler(0); -} - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM DECLARATION -//--------------------------------------------------------------------+ -#define LED_PIN PIN_PA02 - -#if HWREV < 3 -# define BOARD_SERCOM SERCOM5 -#else -# define BOARD_SERCOM SERCOM0 -#endif - -static inline void init_clock(void) -{ - /* AUTOWS is enabled by default in REG_NVMCTRL_CTRLA - no need to change the number of wait states when changing the core clock */ -#if HWREV == 1 - /* configure XOSC1 for a 16MHz crystal connected to XIN1/XOUT1 */ - OSCCTRL->XOSCCTRL[1].reg = - OSCCTRL_XOSCCTRL_STARTUP(6) | // 1,953 ms - OSCCTRL_XOSCCTRL_RUNSTDBY | - OSCCTRL_XOSCCTRL_ENALC | - OSCCTRL_XOSCCTRL_IMULT(4) | - OSCCTRL_XOSCCTRL_IPTAT(3) | - OSCCTRL_XOSCCTRL_XTALEN | - OSCCTRL_XOSCCTRL_ENABLE; - while(0 == OSCCTRL->STATUS.bit.XOSCRDY1); - - OSCCTRL->Dpll[0].DPLLCTRLB.reg = OSCCTRL_DPLLCTRLB_DIV(3) | OSCCTRL_DPLLCTRLB_REFCLK(OSCCTRL_DPLLCTRLB_REFCLK_XOSC1_Val); /* pre-scaler = 8, input = XOSC1 */ - OSCCTRL->Dpll[0].DPLLRATIO.reg = OSCCTRL_DPLLRATIO_LDRFRAC(0x0) | OSCCTRL_DPLLRATIO_LDR(39); /* multiply by 40 -> 80 MHz */ - OSCCTRL->Dpll[0].DPLLCTRLA.reg = OSCCTRL_DPLLCTRLA_RUNSTDBY | OSCCTRL_DPLLCTRLA_ENABLE; - while(0 == OSCCTRL->Dpll[0].DPLLSTATUS.bit.CLKRDY); /* wait for the PLL0 to be ready */ - - OSCCTRL->Dpll[1].DPLLCTRLB.reg = OSCCTRL_DPLLCTRLB_DIV(7) | OSCCTRL_DPLLCTRLB_REFCLK(OSCCTRL_DPLLCTRLB_REFCLK_XOSC1_Val); /* pre-scaler = 16, input = XOSC1 */ - OSCCTRL->Dpll[1].DPLLRATIO.reg = OSCCTRL_DPLLRATIO_LDRFRAC(0x0) | OSCCTRL_DPLLRATIO_LDR(47); /* multiply by 48 -> 48 MHz */ - OSCCTRL->Dpll[1].DPLLCTRLA.reg = OSCCTRL_DPLLCTRLA_RUNSTDBY | OSCCTRL_DPLLCTRLA_ENABLE; - while(0 == OSCCTRL->Dpll[1].DPLLSTATUS.bit.CLKRDY); /* wait for the PLL1 to be ready */ -#else // HWREV >= 1 - /* configure XOSC0 for a 16MHz crystal connected to XIN0/XOUT0 */ - OSCCTRL->XOSCCTRL[0].reg = - OSCCTRL_XOSCCTRL_STARTUP(6) | // 1,953 ms - OSCCTRL_XOSCCTRL_RUNSTDBY | - OSCCTRL_XOSCCTRL_ENALC | - OSCCTRL_XOSCCTRL_IMULT(4) | - OSCCTRL_XOSCCTRL_IPTAT(3) | - OSCCTRL_XOSCCTRL_XTALEN | - OSCCTRL_XOSCCTRL_ENABLE; - while(0 == OSCCTRL->STATUS.bit.XOSCRDY0); - - OSCCTRL->Dpll[0].DPLLCTRLB.reg = OSCCTRL_DPLLCTRLB_DIV(3) | OSCCTRL_DPLLCTRLB_REFCLK(OSCCTRL_DPLLCTRLB_REFCLK_XOSC0_Val); /* pre-scaler = 8, input = XOSC1 */ - OSCCTRL->Dpll[0].DPLLRATIO.reg = OSCCTRL_DPLLRATIO_LDRFRAC(0x0) | OSCCTRL_DPLLRATIO_LDR(39); /* multiply by 40 -> 80 MHz */ - OSCCTRL->Dpll[0].DPLLCTRLA.reg = OSCCTRL_DPLLCTRLA_RUNSTDBY | OSCCTRL_DPLLCTRLA_ENABLE; - while(0 == OSCCTRL->Dpll[0].DPLLSTATUS.bit.CLKRDY); /* wait for the PLL0 to be ready */ - - OSCCTRL->Dpll[1].DPLLCTRLB.reg = OSCCTRL_DPLLCTRLB_DIV(7) | OSCCTRL_DPLLCTRLB_REFCLK(OSCCTRL_DPLLCTRLB_REFCLK_XOSC0_Val); /* pre-scaler = 16, input = XOSC1 */ - OSCCTRL->Dpll[1].DPLLRATIO.reg = OSCCTRL_DPLLRATIO_LDRFRAC(0x0) | OSCCTRL_DPLLRATIO_LDR(47); /* multiply by 48 -> 48 MHz */ - OSCCTRL->Dpll[1].DPLLCTRLA.reg = OSCCTRL_DPLLCTRLA_RUNSTDBY | OSCCTRL_DPLLCTRLA_ENABLE; - while(0 == OSCCTRL->Dpll[1].DPLLSTATUS.bit.CLKRDY); /* wait for the PLL1 to be ready */ -#endif // HWREV - - /* configure clock-generator 0 to use DPLL0 as source -> GCLK0 is used for the core */ - GCLK->GENCTRL[0].reg = - GCLK_GENCTRL_DIV(0) | - GCLK_GENCTRL_RUNSTDBY | - GCLK_GENCTRL_GENEN | - GCLK_GENCTRL_SRC_DPLL0 | /* DPLL0 */ - GCLK_GENCTRL_IDC ; - while(1 == GCLK->SYNCBUSY.bit.GENCTRL0); /* wait for the synchronization between clock domains to be complete */ - - /* configure clock-generator 1 to use DPLL1 as source -> for use with some peripheral */ - GCLK->GENCTRL[1].reg = - GCLK_GENCTRL_DIV(0) | - GCLK_GENCTRL_RUNSTDBY | - GCLK_GENCTRL_GENEN | - GCLK_GENCTRL_SRC_DPLL1 | - GCLK_GENCTRL_IDC ; - while(1 == GCLK->SYNCBUSY.bit.GENCTRL1); /* wait for the synchronization between clock domains to be complete */ - - /* configure clock-generator 2 to use DPLL0 as source -> for use with SERCOM */ - GCLK->GENCTRL[2].reg = - GCLK_GENCTRL_DIV(1) | /* 80MHz */ - GCLK_GENCTRL_RUNSTDBY | - GCLK_GENCTRL_GENEN | - GCLK_GENCTRL_SRC_DPLL0 | - GCLK_GENCTRL_IDC ; - while(1 == GCLK->SYNCBUSY.bit.GENCTRL2); /* wait for the synchronization between clock domains to be complete */ -} - -static inline void uart_init(void) -{ -#if HWREV < 3 - /* configure SERCOM5 on PB02 */ - PORT->Group[1].WRCONFIG.reg = - PORT_WRCONFIG_WRPINCFG | - PORT_WRCONFIG_WRPMUX | - PORT_WRCONFIG_PMUX(3) | /* function D */ - PORT_WRCONFIG_DRVSTR | - PORT_WRCONFIG_PINMASK(0x0004) | /* PB02 */ - PORT_WRCONFIG_PMUXEN; - - MCLK->APBDMASK.bit.SERCOM5_ = 1; - GCLK->PCHCTRL[SERCOM5_GCLK_ID_CORE].reg = GCLK_PCHCTRL_GEN_GCLK2 | GCLK_PCHCTRL_CHEN; /* setup SERCOM to use GLCK2 -> 80MHz */ - - SERCOM5->USART.CTRLA.reg = 0x00; /* disable SERCOM -> enable config */ - while(SERCOM5->USART.SYNCBUSY.bit.ENABLE); - - SERCOM5->USART.CTRLA.reg = /* CMODE = 0 -> async, SAMPA = 0, FORM = 0 -> USART frame, SMPR = 0 -> arithmetic baud rate */ - SERCOM_USART_CTRLA_SAMPR(1) | /* 0 = 16x / arithmetic baud rate, 1 = 16x / fractional baud rate */ -// SERCOM_USART_CTRLA_FORM(0) | /* 0 = USART Frame, 2 = LIN Master */ - SERCOM_USART_CTRLA_DORD | /* LSB first */ - SERCOM_USART_CTRLA_MODE(1) | /* 0 = Asynchronous, 1 = USART with internal clock */ - SERCOM_USART_CTRLA_RXPO(1) | /* SERCOM PAD[1] is used for data reception */ - SERCOM_USART_CTRLA_TXPO(0); /* SERCOM PAD[0] is used for data transmission */ - - SERCOM5->USART.CTRLB.reg = /* RXEM = 0 -> receiver disabled, LINCMD = 0 -> normal USART transmission, SFDE = 0 -> start-of-frame detection disabled, SBMODE = 0 -> one stop bit, CHSIZE = 0 -> 8 bits */ - SERCOM_USART_CTRLB_TXEN; /* transmitter enabled */ - SERCOM5->USART.CTRLC.reg = 0x00; - // 21.701388889 @ baud rate of 230400 bit/s, table 33-2, p 918 of DS60001507E - SERCOM5->USART.BAUD.reg = SERCOM_USART_BAUD_FRAC_FP(7) | SERCOM_USART_BAUD_FRAC_BAUD(21); - -// SERCOM5->USART.INTENSET.reg = SERCOM_USART_INTENSET_TXC; - SERCOM5->SPI.CTRLA.bit.ENABLE = 1; /* activate SERCOM */ - while(SERCOM5->USART.SYNCBUSY.bit.ENABLE); /* wait for SERCOM to be ready */ -#else -/* configure SERCOM0 on PA08 */ - PORT->Group[0].WRCONFIG.reg = - PORT_WRCONFIG_WRPINCFG | - PORT_WRCONFIG_WRPMUX | - PORT_WRCONFIG_PMUX(2) | /* function C */ - PORT_WRCONFIG_DRVSTR | - PORT_WRCONFIG_PINMASK(0x0100) | /* PA08 */ - PORT_WRCONFIG_PMUXEN; - - MCLK->APBAMASK.bit.SERCOM0_ = 1; - GCLK->PCHCTRL[SERCOM0_GCLK_ID_CORE].reg = GCLK_PCHCTRL_GEN_GCLK2 | GCLK_PCHCTRL_CHEN; /* setup SERCOM to use GLCK2 -> 80MHz */ - - SERCOM0->USART.CTRLA.reg = 0x00; /* disable SERCOM -> enable config */ - while(SERCOM0->USART.SYNCBUSY.bit.ENABLE); - - SERCOM0->USART.CTRLA.reg = /* CMODE = 0 -> async, SAMPA = 0, FORM = 0 -> USART frame, SMPR = 0 -> arithmetic baud rate */ - SERCOM_USART_CTRLA_SAMPR(1) | /* 0 = 16x / arithmetic baud rate, 1 = 16x / fractional baud rate */ -// SERCOM_USART_CTRLA_FORM(0) | /* 0 = USART Frame, 2 = LIN Master */ - SERCOM_USART_CTRLA_DORD | /* LSB first */ - SERCOM_USART_CTRLA_MODE(1) | /* 0 = Asynchronous, 1 = USART with internal clock */ - SERCOM_USART_CTRLA_RXPO(1) | /* SERCOM PAD[1] is used for data reception */ - SERCOM_USART_CTRLA_TXPO(0); /* SERCOM PAD[0] is used for data transmission */ - - SERCOM0->USART.CTRLB.reg = /* RXEM = 0 -> receiver disabled, LINCMD = 0 -> normal USART transmission, SFDE = 0 -> start-of-frame detection disabled, SBMODE = 0 -> one stop bit, CHSIZE = 0 -> 8 bits */ - SERCOM_USART_CTRLB_TXEN; /* transmitter enabled */ - SERCOM0->USART.CTRLC.reg = 0x00; - // 21.701388889 @ baud rate of 230400 bit/s, table 33-2, p 918 of DS60001507E - SERCOM0->USART.BAUD.reg = SERCOM_USART_BAUD_FRAC_FP(7) | SERCOM_USART_BAUD_FRAC_BAUD(21); - -// SERCOM0->USART.INTENSET.reg = SERCOM_USART_INTENSET_TXC; - SERCOM0->SPI.CTRLA.bit.ENABLE = 1; /* activate SERCOM */ - while(SERCOM0->USART.SYNCBUSY.bit.ENABLE); /* wait for SERCOM to be ready */ -#endif -} - -static inline void uart_send_buffer(uint8_t const *text, size_t len) -{ - for (size_t i = 0; i < len; ++i) { - BOARD_SERCOM->USART.DATA.reg = text[i]; - while((BOARD_SERCOM->USART.INTFLAG.reg & SERCOM_SPI_INTFLAG_TXC) == 0); - } -} - -static inline void uart_send_str(const char* text) -{ - while (*text) { - BOARD_SERCOM->USART.DATA.reg = *text++; - while((BOARD_SERCOM->USART.INTFLAG.reg & SERCOM_SPI_INTFLAG_TXC) == 0); - } -} - - -void board_init(void) -{ - init_clock(); - - SystemCoreClock = CONF_CPU_FREQUENCY; - -#if CFG_TUSB_OS == OPT_OS_NONE - SysTick_Config(CONF_CPU_FREQUENCY / 1000); -#endif - - uart_init(); -#if CFG_TUSB_DEBUG >= 2 - uart_send_str(BOARD_NAME " UART initialized\n"); - tu_printf(BOARD_NAME " reset cause %#02x\n", RSTC->RCAUSE.reg); -#endif - - // Led init - gpio_set_pin_direction(LED_PIN, GPIO_DIRECTION_OUT); - gpio_set_pin_level(LED_PIN, 0); - -#if CFG_TUSB_DEBUG >= 2 - uart_send_str(BOARD_NAME " LED pin configured\n"); -#endif - -#if CFG_TUSB_OS == OPT_OS_FREERTOS - // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) - NVIC_SetPriority(USB_0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); - NVIC_SetPriority(USB_1_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); - NVIC_SetPriority(USB_2_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); - NVIC_SetPriority(USB_3_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); -#endif - - -#if CFG_TUD_ENABLED -#if CFG_TUSB_DEBUG >= 2 - uart_send_str(BOARD_NAME " USB device enabled\n"); -#endif - - /* USB clock init - * The USB module requires a GCLK_USB of 48 MHz ~ 0.25% clock - * for low speed and full speed operation. */ - hri_gclk_write_PCHCTRL_reg(GCLK, USB_GCLK_ID, GCLK_PCHCTRL_GEN_GCLK1_Val | GCLK_PCHCTRL_CHEN); - hri_mclk_set_AHBMASK_USB_bit(MCLK); - hri_mclk_set_APBBMASK_USB_bit(MCLK); - - // USB pin init - gpio_set_pin_direction(PIN_PA24, GPIO_DIRECTION_OUT); - gpio_set_pin_level(PIN_PA24, false); - gpio_set_pin_pull_mode(PIN_PA24, GPIO_PULL_OFF); - gpio_set_pin_direction(PIN_PA25, GPIO_DIRECTION_OUT); - gpio_set_pin_level(PIN_PA25, false); - gpio_set_pin_pull_mode(PIN_PA25, GPIO_PULL_OFF); - - gpio_set_pin_function(PIN_PA24, PINMUX_PA24H_USB_DM); - gpio_set_pin_function(PIN_PA25, PINMUX_PA25H_USB_DP); - - -#if CFG_TUSB_DEBUG >= 2 - uart_send_str(BOARD_NAME " USB device configured\n"); -#endif -#endif -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - gpio_set_pin_level(LED_PIN, state); -} - -uint32_t board_button_read(void) -{ - // this board has no button - return 0; -} - -int board_uart_read(uint8_t* buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -int board_uart_write(void const * buf, int len) -{ - if (len < 0) { - uart_send_str(buf); - } else { - uart_send_buffer(buf, len); - } - return len; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; - -void SysTick_Handler(void) -{ - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif - -// Required by __libc_init_array in startup code if we are compiling using -// -nostdlib/-nostartfiles. -void _init(void) -{ - -} diff --git a/hw/bsp/same5x/boards/d5035_01/same51j19a_flash.ld b/hw/bsp/same5x/boards/d5035_01/same51j19a_flash.ld deleted file mode 100644 index 486043f22..000000000 --- a/hw/bsp/same5x/boards/d5035_01/same51j19a_flash.ld +++ /dev/null @@ -1,164 +0,0 @@ -/** - * \file - * - * \brief Linker script for running in internal FLASH on the SAME51J19A - * - * Copyright (c) 2019 Microchip Technology Inc. - * - * \asf_license_start - * - * \page License - * - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the "License"); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the Licence at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an AS IS BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - * \asf_license_stop - * - */ - - -OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -OUTPUT_ARCH(arm) -SEARCH_DIR(.) - -/* Memory Spaces Definitions */ -MEMORY -{ - rom (rx) : ORIGIN = 0x00000000, LENGTH = 0x00080000 - ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00030000 - bkupram (rwx) : ORIGIN = 0x47000000, LENGTH = 0x00002000 - qspi (rwx) : ORIGIN = 0x04000000, LENGTH = 0x01000000 -} - -/* The stack size used by the application. NOTE: you need to adjust according to your application. */ -STACK_SIZE = DEFINED(__stack_size__) ? __stack_size__ : 0x1000; - -/* Section Definitions */ -SECTIONS -{ - .text : - { - . = ALIGN(4); - _sfixed = .; - KEEP(*(.vectors .vectors.*)) - *(.text .text.* .gnu.linkonce.t.*) - *(.glue_7t) *(.glue_7) - *(.rodata .rodata* .gnu.linkonce.r.*) - *(.ARM.extab* .gnu.linkonce.armextab.*) - - /* Support C constructors, and C destructors in both user code - and the C library. This also provides support for C++ code. */ - . = ALIGN(4); - KEEP(*(.init)) - . = ALIGN(4); - __preinit_array_start = .; - KEEP (*(.preinit_array)) - __preinit_array_end = .; - - . = ALIGN(4); - __init_array_start = .; - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array)) - __init_array_end = .; - - . = ALIGN(4); - KEEP (*crtbegin.o(.ctors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) - KEEP (*(SORT(.ctors.*))) - KEEP (*crtend.o(.ctors)) - - . = ALIGN(4); - KEEP(*(.fini)) - - . = ALIGN(4); - __fini_array_start = .; - KEEP (*(.fini_array)) - KEEP (*(SORT(.fini_array.*))) - __fini_array_end = .; - - KEEP (*crtbegin.o(.dtors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) - KEEP (*(SORT(.dtors.*))) - KEEP (*crtend.o(.dtors)) - - . = ALIGN(4); - _efixed = .; /* End of text section */ - } > rom - - /* .ARM.exidx is sorted, so has to go in its own output section. */ - PROVIDE_HIDDEN (__exidx_start = .); - .ARM.exidx : - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > rom - PROVIDE_HIDDEN (__exidx_end = .); - - . = ALIGN(4); - _etext = .; - - .relocate : AT (_etext) - { - . = ALIGN(4); - _srelocate = .; - *(.ramfunc .ramfunc.*); - *(.data .data.*); - . = ALIGN(4); - _erelocate = .; - } > ram - - .bkupram (NOLOAD): - { - . = ALIGN(8); - _sbkupram = .; - *(.bkupram .bkupram.*); - . = ALIGN(8); - _ebkupram = .; - } > bkupram - - .qspi (NOLOAD): - { - . = ALIGN(8); - _sqspi = .; - *(.qspi .qspi.*); - . = ALIGN(8); - _eqspi = .; - } > qspi - - /* .bss section which is used for uninitialized data */ - .bss (NOLOAD) : - { - . = ALIGN(4); - _sbss = . ; - _szero = .; - *(.bss .bss.*) - *(COMMON) - . = ALIGN(4); - _ebss = . ; - _ezero = .; - } > ram - - /* stack section */ - .stack (NOLOAD): - { - . = ALIGN(8); - _sstack = .; - . = . + STACK_SIZE; - . = ALIGN(8); - _estack = .; - } > ram - - . = ALIGN(4); - _end = . ; - end = .; -} diff --git a/hw/bsp/same5x/boards/same54_xplained/board.mk b/hw/bsp/same5x/boards/same54_xplained/board.mk deleted file mode 100644 index 41cf95bfc..000000000 --- a/hw/bsp/same5x/boards/same54_xplained/board.mk +++ /dev/null @@ -1,12 +0,0 @@ -MCU = same54 - -CFLAGS += \ - -DCONF_CPU_FREQUENCY=48000000 \ - -D__SAME54P20A__ \ - -DBOARD_NAME="\"Microchip SAM E54 Xplained Pro\"" - -# All source paths should be relative to the top level. -LD_FILE = $(BOARD_PATH)/same54p20a_flash.ld - -# For flash-jlink target -JLINK_DEVICE = ATSAME54P20 diff --git a/hw/bsp/same5x/boards/same54_xplained/same54_xplained.c b/hw/bsp/same5x/boards/same54_xplained/same54_xplained.c deleted file mode 100644 index 93adea63e..000000000 --- a/hw/bsp/same5x/boards/same54_xplained/same54_xplained.c +++ /dev/null @@ -1,306 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2021 Jean Gressmann - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - */ - -#include -#include "bsp/board_api.h" - -#include - - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ -void USB_0_Handler(void) -{ - tud_int_handler(0); -} - -void USB_1_Handler(void) -{ - tud_int_handler(0); -} - -void USB_2_Handler(void) -{ - tud_int_handler(0); -} - -void USB_3_Handler(void) -{ - tud_int_handler(0); -} - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM DECLARATION -//--------------------------------------------------------------------+ -#define LED_PIN PIN_PC18 -#define BUTTON_PIN PIN_PB31 -#define BOARD_SERCOM SERCOM2 - -/** Initializes the clocks from the external 12 MHz crystal - * - * The goal of this setup is to preserve the second PLL - * for the application code while still having a reasonable - * 48 MHz clock for USB / UART. - * - * GCLK0: CONF_CPU_FREQUENCY (default 120 MHz) from PLL0 - * GCLK1: unused - * GCLK2: 12 MHz from XOSC1 - * DFLL48M: closed loop from GLCK2 - * GCLK3: 48 MHz - */ -static inline void init_clock_xtal(void) -{ - /* configure for a 12MHz crystal connected to XIN1/XOUT1 */ - OSCCTRL->XOSCCTRL[1].reg = - OSCCTRL_XOSCCTRL_STARTUP(6) | // 1.953 ms - OSCCTRL_XOSCCTRL_RUNSTDBY | - OSCCTRL_XOSCCTRL_ENALC | - OSCCTRL_XOSCCTRL_IMULT(4) | OSCCTRL_XOSCCTRL_IPTAT(3) | // 8MHz to 16MHz - OSCCTRL_XOSCCTRL_XTALEN | - OSCCTRL_XOSCCTRL_ENABLE; - while(0 == OSCCTRL->STATUS.bit.XOSCRDY1); - - OSCCTRL->Dpll[0].DPLLCTRLB.reg = OSCCTRL_DPLLCTRLB_DIV(2) | OSCCTRL_DPLLCTRLB_REFCLK_XOSC1; /* 12MHz / 6 = 2Mhz, input = XOSC1 */ - OSCCTRL->Dpll[0].DPLLRATIO.reg = OSCCTRL_DPLLRATIO_LDRFRAC(0x0) | OSCCTRL_DPLLRATIO_LDR((CONF_CPU_FREQUENCY / 1000000 / 2) - 1); /* multiply to get CONF_CPU_FREQUENCY (default = 120MHz) */ - OSCCTRL->Dpll[0].DPLLCTRLA.reg = OSCCTRL_DPLLCTRLA_RUNSTDBY | OSCCTRL_DPLLCTRLA_ENABLE; - while(0 == OSCCTRL->Dpll[0].DPLLSTATUS.bit.CLKRDY); /* wait for the PLL0 to be ready */ - - /* configure clock-generator 0 to use DPLL0 as source -> GCLK0 is used for the core */ - GCLK->GENCTRL[0].reg = - GCLK_GENCTRL_DIV(0) | - GCLK_GENCTRL_RUNSTDBY | - GCLK_GENCTRL_GENEN | - GCLK_GENCTRL_SRC_DPLL0 | - GCLK_GENCTRL_IDC; - while(1 == GCLK->SYNCBUSY.bit.GENCTRL0); /* wait for the synchronization between clock domains to be complete */ - - // configure GCLK2 for 12MHz from XOSC1 - GCLK->GENCTRL[2].reg = - GCLK_GENCTRL_DIV(0) | - GCLK_GENCTRL_RUNSTDBY | - GCLK_GENCTRL_GENEN | - GCLK_GENCTRL_SRC_XOSC1 | - GCLK_GENCTRL_IDC; - while(1 == GCLK->SYNCBUSY.bit.GENCTRL2); /* wait for the synchronization between clock domains to be complete */ - - /* setup DFLL48M to use GLCK2 */ - GCLK->PCHCTRL[OSCCTRL_GCLK_ID_DFLL48].reg = GCLK_PCHCTRL_GEN_GCLK2 | GCLK_PCHCTRL_CHEN; - - OSCCTRL->DFLLCTRLA.reg = 0; - while(1 == OSCCTRL->DFLLSYNC.bit.ENABLE); - - OSCCTRL->DFLLCTRLB.reg = OSCCTRL_DFLLCTRLB_MODE | OSCCTRL_DFLLCTRLB_WAITLOCK; - OSCCTRL->DFLLMUL.bit.MUL = 4; // 4 * 12MHz -> 48MHz - - OSCCTRL->DFLLCTRLA.reg = - OSCCTRL_DFLLCTRLA_ENABLE | - OSCCTRL_DFLLCTRLA_RUNSTDBY; - while(1 == OSCCTRL->DFLLSYNC.bit.ENABLE); - - // setup 48 MHz GCLK3 from DFLL48M - GCLK->GENCTRL[3].reg = - GCLK_GENCTRL_DIV(0) | - GCLK_GENCTRL_RUNSTDBY | - GCLK_GENCTRL_GENEN | - GCLK_GENCTRL_SRC_DFLL | - GCLK_GENCTRL_IDC; - while(1 == GCLK->SYNCBUSY.bit.GENCTRL3); -} - -/* Initialize SERCOM2 for 115200 bps 8N1 using a 48 MHz clock */ -static inline void uart_init(void) -{ - gpio_set_pin_function(PIN_PB24, PINMUX_PB24D_SERCOM2_PAD1); - gpio_set_pin_function(PIN_PB25, PINMUX_PB25D_SERCOM2_PAD0); - - MCLK->APBBMASK.bit.SERCOM2_ = 1; - GCLK->PCHCTRL[SERCOM2_GCLK_ID_CORE].reg = GCLK_PCHCTRL_GEN_GCLK0 | GCLK_PCHCTRL_CHEN; - - BOARD_SERCOM->USART.CTRLA.bit.SWRST = 1; /* reset and disable SERCOM -> enable configuration */ - while (BOARD_SERCOM->USART.SYNCBUSY.bit.SWRST); - - BOARD_SERCOM->USART.CTRLA.reg = - SERCOM_USART_CTRLA_SAMPR(0) | /* 0 = 16x / arithmetic baud rate, 1 = 16x / fractional baud rate */ - SERCOM_USART_CTRLA_SAMPA(0) | /* 16x over sampling */ - SERCOM_USART_CTRLA_FORM(0) | /* 0x0 USART frame, 0x1 USART frame with parity, ... */ - SERCOM_USART_CTRLA_DORD | /* LSB first */ - SERCOM_USART_CTRLA_MODE(1) | /* 0x0 USART with external clock, 0x1 USART with internal clock */ - SERCOM_USART_CTRLA_RXPO(1) | /* SERCOM PAD[1] is used for data reception */ - SERCOM_USART_CTRLA_TXPO(0); /* SERCOM PAD[0] is used for data transmission */ - - BOARD_SERCOM->USART.CTRLB.reg = /* RXEM = 0 -> receiver disabled, LINCMD = 0 -> normal USART transmission, SFDE = 0 -> start-of-frame detection disabled, SBMODE = 0 -> one stop bit, CHSIZE = 0 -> 8 bits */ - SERCOM_USART_CTRLB_TXEN | /* transmitter enabled */ - SERCOM_USART_CTRLB_RXEN; /* receiver enabled */ - // BOARD_SERCOM->USART.BAUD.reg = SERCOM_USART_BAUD_FRAC_FP(0) | SERCOM_USART_BAUD_FRAC_BAUD(26); /* 48000000/(16*115200) = 26.041666667 */ - BOARD_SERCOM->USART.BAUD.reg = SERCOM_USART_BAUD_BAUD(63019); /* 65536*(1−16*115200/48000000) */ - - BOARD_SERCOM->USART.CTRLA.bit.ENABLE = 1; /* activate SERCOM */ - while (BOARD_SERCOM->USART.SYNCBUSY.bit.ENABLE); /* wait for SERCOM to be ready */ -} - -static inline void uart_send_buffer(uint8_t const *text, size_t len) -{ - for (size_t i = 0; i < len; ++i) { - BOARD_SERCOM->USART.DATA.reg = text[i]; - while((BOARD_SERCOM->USART.INTFLAG.reg & SERCOM_USART_INTFLAG_TXC) == 0); - } -} - -static inline void uart_send_str(const char* text) -{ - while (*text) { - BOARD_SERCOM->USART.DATA.reg = *text++; - while((BOARD_SERCOM->USART.INTFLAG.reg & SERCOM_USART_INTFLAG_TXC) == 0); - } -} - - -void board_init(void) -{ - // Uncomment this line and change the GCLK for UART/USB to run off the XTAL. - // init_clock_xtal(); - - SystemCoreClock = CONF_CPU_FREQUENCY; - -#if CFG_TUSB_OS == OPT_OS_NONE - SysTick_Config(CONF_CPU_FREQUENCY / 1000); -#endif - - uart_init(); - -#if CFG_TUSB_DEBUG >= 2 - uart_send_str(BOARD_NAME " UART initialized\n"); - tu_printf(BOARD_NAME " reset cause %#02x\n", RSTC->RCAUSE.reg); -#endif - - // LED0 init - gpio_set_pin_function(LED_PIN, GPIO_PIN_FUNCTION_OFF); - gpio_set_pin_direction(LED_PIN, GPIO_DIRECTION_OUT); - board_led_write(0); - -#if CFG_TUSB_DEBUG >= 2 - uart_send_str(BOARD_NAME " LED pin configured\n"); -#endif - - // BTN0 init - gpio_set_pin_function(BUTTON_PIN, GPIO_PIN_FUNCTION_OFF); - gpio_set_pin_direction(BUTTON_PIN, GPIO_DIRECTION_IN); - gpio_set_pin_pull_mode(BUTTON_PIN, GPIO_PULL_UP); - -#if CFG_TUSB_DEBUG >= 2 - uart_send_str(BOARD_NAME " Button pin configured\n"); -#endif - -#if CFG_TUSB_OS == OPT_OS_FREERTOS - // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) - NVIC_SetPriority(USB_0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); - NVIC_SetPriority(USB_1_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); - NVIC_SetPriority(USB_2_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); - NVIC_SetPriority(USB_3_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); -#endif - - -#if CFG_TUD_ENABLED -#if CFG_TUSB_DEBUG >= 2 - uart_send_str(BOARD_NAME " USB device enabled\n"); -#endif - - /* USB clock init - * The USB module requires a GCLK_USB of 48 MHz ~ 0.25% clock - * for low speed and full speed operation. - */ - hri_gclk_write_PCHCTRL_reg(GCLK, USB_GCLK_ID, GCLK_PCHCTRL_GEN_GCLK0_Val | GCLK_PCHCTRL_CHEN); - hri_mclk_set_AHBMASK_USB_bit(MCLK); - hri_mclk_set_APBBMASK_USB_bit(MCLK); - - // USB pin init - gpio_set_pin_direction(PIN_PA24, GPIO_DIRECTION_OUT); - gpio_set_pin_level(PIN_PA24, false); - gpio_set_pin_pull_mode(PIN_PA24, GPIO_PULL_OFF); - gpio_set_pin_direction(PIN_PA25, GPIO_DIRECTION_OUT); - gpio_set_pin_level(PIN_PA25, false); - gpio_set_pin_pull_mode(PIN_PA25, GPIO_PULL_OFF); - - gpio_set_pin_function(PIN_PA24, PINMUX_PA24H_USB_DM); - gpio_set_pin_function(PIN_PA25, PINMUX_PA25H_USB_DP); - - -#if CFG_TUSB_DEBUG >= 2 - uart_send_str(BOARD_NAME " USB device configured\n"); -#endif -#endif -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - gpio_set_pin_level(LED_PIN, !state); -} - -uint32_t board_button_read(void) -{ - return (PORT->Group[1].IN.reg & 0x80000000) != 0x80000000; -} - -int board_uart_read(uint8_t* buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -int board_uart_write(void const * buf, int len) -{ - if (len < 0) { - uart_send_str(buf); - } else { - uart_send_buffer(buf, len); - } - return len; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; - -void SysTick_Handler(void) -{ - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif - -// Required by __libc_init_array in startup code if we are compiling using -// -nostdlib/-nostartfiles. -void _init(void) -{ - -} diff --git a/hw/bsp/same5x/boards/same54_xplained/same54p20a_flash.ld b/hw/bsp/same5x/boards/same54_xplained/same54p20a_flash.ld deleted file mode 100644 index 7a7f1be46..000000000 --- a/hw/bsp/same5x/boards/same54_xplained/same54p20a_flash.ld +++ /dev/null @@ -1,163 +0,0 @@ -/** - * \file - * - * \brief Linker script for running in internal FLASH on the SAME54P20A - * - * Copyright (c) 2019 Microchip Technology Inc. - * - * \asf_license_start - * - * \page License - * - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the "License"); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the Licence at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an AS IS BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - * \asf_license_stop - * - */ - - -OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -OUTPUT_ARCH(arm) -SEARCH_DIR(.) - -/* Memory Spaces Definitions */ -MEMORY -{ - rom (rx) : ORIGIN = 0x00000000, LENGTH = 0x00100000 - ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00040000 - bkupram (rwx) : ORIGIN = 0x47000000, LENGTH = 0x00002000 - qspi (rwx) : ORIGIN = 0x04000000, LENGTH = 0x01000000 -} - -/* The stack size used by the application. NOTE: you need to adjust according to your application. */ -STACK_SIZE = DEFINED(__stack_size__) ? __stack_size__ : 0x10000; - -/* Section Definitions */ -SECTIONS -{ - .text : - { - . = ALIGN(4); - _sfixed = .; - KEEP(*(.vectors .vectors.*)) - *(.text .text.* .gnu.linkonce.t.*) - *(.glue_7t) *(.glue_7) - *(.rodata .rodata* .gnu.linkonce.r.*) - *(.ARM.extab* .gnu.linkonce.armextab.*) - - /* Support C constructors, and C destructors in both user code - and the C library. This also provides support for C++ code. */ - . = ALIGN(4); - KEEP(*(.init)) - . = ALIGN(4); - __preinit_array_start = .; - KEEP (*(.preinit_array)) - __preinit_array_end = .; - - . = ALIGN(4); - __init_array_start = .; - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array)) - __init_array_end = .; - - . = ALIGN(4); - KEEP (*crtbegin.o(.ctors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) - KEEP (*(SORT(.ctors.*))) - KEEP (*crtend.o(.ctors)) - - . = ALIGN(4); - KEEP(*(.fini)) - - . = ALIGN(4); - __fini_array_start = .; - KEEP (*(.fini_array)) - KEEP (*(SORT(.fini_array.*))) - __fini_array_end = .; - - KEEP (*crtbegin.o(.dtors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) - KEEP (*(SORT(.dtors.*))) - KEEP (*crtend.o(.dtors)) - - . = ALIGN(4); - _efixed = .; /* End of text section */ - } > rom - - /* .ARM.exidx is sorted, so has to go in its own output section. */ - PROVIDE_HIDDEN (__exidx_start = .); - .ARM.exidx : - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > rom - PROVIDE_HIDDEN (__exidx_end = .); - - . = ALIGN(4); - _etext = .; - - .relocate : AT (_etext) - { - . = ALIGN(4); - _srelocate = .; - *(.ramfunc .ramfunc.*); - *(.data .data.*); - . = ALIGN(4); - _erelocate = .; - } > ram - - .bkupram (NOLOAD): - { - . = ALIGN(8); - _sbkupram = .; - *(.bkupram .bkupram.*); - . = ALIGN(8); - _ebkupram = .; - } > bkupram - - .qspi (NOLOAD): - { - . = ALIGN(8); - _sqspi = .; - *(.qspi .qspi.*); - . = ALIGN(8); - _eqspi = .; - } > qspi - - /* .bss section which is used for uninitialized data */ - .bss (NOLOAD) : - { - . = ALIGN(4); - _sbss = . ; - _szero = .; - *(.bss .bss.*) - *(COMMON) - . = ALIGN(4); - _ebss = . ; - _ezero = .; - } > ram - - /* stack section */ - .stack (NOLOAD): - { - . = ALIGN(8); - _sstack = .; - . = . + STACK_SIZE; - . = ALIGN(8); - _estack = .; - } > ram - - . = ALIGN(4); - _end = . ; -} diff --git a/hw/bsp/same5x/boards/same54_xplained/same54p20a_sram.ld b/hw/bsp/same5x/boards/same54_xplained/same54p20a_sram.ld deleted file mode 100644 index c768f9c9a..000000000 --- a/hw/bsp/same5x/boards/same54_xplained/same54p20a_sram.ld +++ /dev/null @@ -1,162 +0,0 @@ -/** - * \file - * - * \brief Linker script for running in internal SRAM on the SAME54P20A - * - * Copyright (c) 2019 Microchip Technology Inc. - * - * \asf_license_start - * - * \page License - * - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the "License"); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the Licence at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an AS IS BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - * \asf_license_stop - * - */ - - -OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -OUTPUT_ARCH(arm) -SEARCH_DIR(.) - -/* Memory Spaces Definitions */ -MEMORY -{ - ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00040000 - bkupram (rwx) : ORIGIN = 0x47000000, LENGTH = 0x00002000 - qspi (rwx) : ORIGIN = 0x04000000, LENGTH = 0x01000000 -} - -/* The stack size used by the application. NOTE: you need to adjust according to your application. */ -STACK_SIZE = DEFINED(__stack_size__) ? __stack_size__ : 0x10000; - -/* Section Definitions */ -SECTIONS -{ - .text : - { - . = ALIGN(4); - _sfixed = .; - KEEP(*(.vectors .vectors.*)) - *(.text .text.* .gnu.linkonce.t.*) - *(.glue_7t) *(.glue_7) - *(.rodata .rodata* .gnu.linkonce.r.*) - *(.ARM.extab* .gnu.linkonce.armextab.*) - - /* Support C constructors, and C destructors in both user code - and the C library. This also provides support for C++ code. */ - . = ALIGN(4); - KEEP(*(.init)) - . = ALIGN(4); - __preinit_array_start = .; - KEEP (*(.preinit_array)) - __preinit_array_end = .; - - . = ALIGN(4); - __init_array_start = .; - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array)) - __init_array_end = .; - - . = ALIGN(4); - KEEP (*crtbegin.o(.ctors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) - KEEP (*(SORT(.ctors.*))) - KEEP (*crtend.o(.ctors)) - - . = ALIGN(4); - KEEP(*(.fini)) - - . = ALIGN(4); - __fini_array_start = .; - KEEP (*(.fini_array)) - KEEP (*(SORT(.fini_array.*))) - __fini_array_end = .; - - KEEP (*crtbegin.o(.dtors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) - KEEP (*(SORT(.dtors.*))) - KEEP (*crtend.o(.dtors)) - - . = ALIGN(4); - _efixed = .; /* End of text section */ - } > ram - - /* .ARM.exidx is sorted, so has to go in its own output section. */ - PROVIDE_HIDDEN (__exidx_start = .); - .ARM.exidx : - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > ram - PROVIDE_HIDDEN (__exidx_end = .); - - . = ALIGN(4); - _etext = .; - - .relocate : AT (_etext) - { - . = ALIGN(4); - _srelocate = .; - *(.ramfunc .ramfunc.*); - *(.data .data.*); - . = ALIGN(4); - _erelocate = .; - } > ram - - .bkupram (NOLOAD): - { - . = ALIGN(8); - _sbkupram = .; - *(.bkupram .bkupram.*); - . = ALIGN(8); - _ebkupram = .; - } > bkupram - - .qspi (NOLOAD): - { - . = ALIGN(8); - _sqspi = .; - *(.qspi .qspi.*); - . = ALIGN(8); - _eqspi = .; - } > qspi - - /* .bss section which is used for uninitialized data */ - .bss (NOLOAD) : - { - . = ALIGN(4); - _sbss = . ; - _szero = .; - *(.bss .bss.*) - *(COMMON) - . = ALIGN(4); - _ebss = . ; - _ezero = .; - } > ram - - /* stack section */ - .stack (NOLOAD): - { - . = ALIGN(8); - _sstack = .; - . = . + STACK_SIZE; - . = ALIGN(8); - _estack = .; - } > ram - - . = ALIGN(4); - _end = . ; -} diff --git a/hw/bsp/same5x/family.mk b/hw/bsp/same5x/family.mk deleted file mode 100644 index b2bf0d359..000000000 --- a/hw/bsp/same5x/family.mk +++ /dev/null @@ -1,38 +0,0 @@ -DEPS_SUBMODULES += hw/mcu/microchip - -SDK_DIR = hw/mcu/microchip/$(MCU) -include $(TOP)/$(BOARD_PATH)/board.mk -CPU_CORE ?= cortex-m4 - -CFLAGS += \ - -mthumb \ - -mlong-calls \ - -nostdlib -nostartfiles \ - -DCFG_TUSB_MCU=OPT_MCU_SAME5X - -# SAM driver is flooded with -Wcast-qual which slow down complication significantly -CFLAGS_SKIP += -Wcast-qual - -LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs - -SRC_C += \ - src/portable/microchip/samd/dcd_samd.c \ - $(SDK_DIR)/gcc/gcc/startup_$(MCU).c \ - $(SDK_DIR)/gcc/system_$(MCU).c \ - $(SDK_DIR)/hal/utils/src/utils_syscalls.c - -INC += \ - $(TOP)/$(SDK_DIR) \ - $(TOP)/$(SDK_DIR)/config \ - $(TOP)/$(SDK_DIR)/include \ - $(TOP)/$(SDK_DIR)/hal/include \ - $(TOP)/$(SDK_DIR)/hal/utils/include \ - $(TOP)/$(SDK_DIR)/hpl/port \ - $(TOP)/$(SDK_DIR)/hri \ - $(TOP)/$(SDK_DIR)/CMSIS/Include - -# flash using edbg from https://github.com/ataradov/edbg -flash-edbg: $(BUILD)/$(PROJECT).bin - edbg --verbose -t $(MCU) -pv -f $< - -flash: flash-edbg diff --git a/hw/bsp/saml2x/boards/atsaml21_xpro/board.cmake b/hw/bsp/saml2x/boards/atsaml21_xpro/board.cmake index 6312ff89d..874b741cc 100644 --- a/hw/bsp/saml2x/boards/atsaml21_xpro/board.cmake +++ b/hw/bsp/saml2x/boards/atsaml21_xpro/board.cmake @@ -1,4 +1,4 @@ -set(MCU_VARIANT saml21) +set(SAM_FAMILY saml21) set(JLINK_DEVICE ATSAML21J18) set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/saml21j18b_flash.ld) diff --git a/hw/bsp/saml2x/boards/atsaml21_xpro/board.mk b/hw/bsp/saml2x/boards/atsaml21_xpro/board.mk index 75179fc58..4ebfa7e71 100644 --- a/hw/bsp/saml2x/boards/atsaml21_xpro/board.mk +++ b/hw/bsp/saml2x/boards/atsaml21_xpro/board.mk @@ -1,4 +1,4 @@ -MCU_VARIANT = saml21 +SAM_FAMILY = saml21 CFLAGS += -D__SAML21J18B__ diff --git a/hw/bsp/saml2x/boards/saml22_feather/board.cmake b/hw/bsp/saml2x/boards/saml22_feather/board.cmake index 7db751e45..7fd79d2ce 100644 --- a/hw/bsp/saml2x/boards/saml22_feather/board.cmake +++ b/hw/bsp/saml2x/boards/saml22_feather/board.cmake @@ -1,4 +1,4 @@ -set(MCU_VARIANT saml22) +set(SAM_FAMILY saml22) set(JLINK_DEVICE ATSAML22J18) set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/${BOARD}.ld) diff --git a/hw/bsp/saml2x/boards/saml22_feather/board.mk b/hw/bsp/saml2x/boards/saml22_feather/board.mk index 76d86de25..c7817ff70 100644 --- a/hw/bsp/saml2x/boards/saml22_feather/board.mk +++ b/hw/bsp/saml2x/boards/saml22_feather/board.mk @@ -1,4 +1,4 @@ -MCU_VARIANT = saml22 +SAM_FAMILY = saml22 CFLAGS += -D__SAML22J18A__ diff --git a/hw/bsp/saml2x/boards/sensorwatch_m0/board.cmake b/hw/bsp/saml2x/boards/sensorwatch_m0/board.cmake index 162ef127b..67d26475f 100644 --- a/hw/bsp/saml2x/boards/sensorwatch_m0/board.cmake +++ b/hw/bsp/saml2x/boards/sensorwatch_m0/board.cmake @@ -1,4 +1,4 @@ -set(MCU_VARIANT saml22) +set(SAM_FAMILY saml22) set(JLINK_DEVICE ATSAML21J18) set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/${BOARD}.ld) diff --git a/hw/bsp/saml2x/boards/sensorwatch_m0/board.mk b/hw/bsp/saml2x/boards/sensorwatch_m0/board.mk index 76d86de25..c7817ff70 100644 --- a/hw/bsp/saml2x/boards/sensorwatch_m0/board.mk +++ b/hw/bsp/saml2x/boards/sensorwatch_m0/board.mk @@ -1,4 +1,4 @@ -MCU_VARIANT = saml22 +SAM_FAMILY = saml22 CFLAGS += -D__SAML22J18A__ diff --git a/hw/bsp/saml2x/family.cmake b/hw/bsp/saml2x/family.cmake index d8a62aef3..8390cdc9c 100644 --- a/hw/bsp/saml2x/family.cmake +++ b/hw/bsp/saml2x/family.cmake @@ -3,7 +3,7 @@ include_guard() # include board specific include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) -set(SDK_DIR ${TOP}/hw/mcu/microchip/${MCU_VARIANT}) +set(SDK_DIR ${TOP}/hw/mcu/microchip/${SAM_FAMILY}) set(CMSIS_5 ${TOP}/lib/CMSIS_5) # toolchain set up @@ -27,11 +27,11 @@ function(add_board_target BOARD_TARGET) message(FATAL_ERROR "LD_FILE_${CMAKE_C_COMPILER_ID} not defined") endif () - set(STARTUP_FILE_GNU ${SDK_DIR}/gcc/gcc/startup_${MCU_VARIANT}.c) + set(STARTUP_FILE_GNU ${SDK_DIR}/gcc/gcc/startup_${SAM_FAMILY}.c) set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) add_library(${BOARD_TARGET} STATIC - ${SDK_DIR}/gcc/system_${MCU_VARIANT}.c + ${SDK_DIR}/gcc/system_${SAM_FAMILY}.c ${SDK_DIR}/hal/src/hal_atomic.c ${SDK_DIR}/hpl/gclk/hpl_gclk.c ${SDK_DIR}/hpl/mclk/hpl_mclk.c diff --git a/hw/bsp/saml2x/family.mk b/hw/bsp/saml2x/family.mk index e01d7522e..65dfe5032 100644 --- a/hw/bsp/saml2x/family.mk +++ b/hw/bsp/saml2x/family.mk @@ -1,5 +1,5 @@ UF2_FAMILY_ID = 0x68ed2b88 -SDK_DIR = hw/mcu/microchip/$(MCU_VARIANT) +SDK_DIR = hw/mcu/microchip/$(SAM_FAMILY) include $(TOP)/$(BOARD_PATH)/board.mk CPU_CORE ?= cortex-m0plus @@ -22,8 +22,8 @@ LDFLAGS_GCC += \ SRC_C += \ src/portable/microchip/samd/dcd_samd.c \ - $(SDK_DIR)/gcc/gcc/startup_$(MCU_VARIANT).c \ - $(SDK_DIR)/gcc/system_$(MCU_VARIANT).c \ + $(SDK_DIR)/gcc/gcc/startup_$(SAM_FAMILY).c \ + $(SDK_DIR)/gcc/system_$(SAM_FAMILY).c \ $(SDK_DIR)/hal/src/hal_atomic.c \ $(SDK_DIR)/hpl/gclk/hpl_gclk.c \ $(SDK_DIR)/hpl/mclk/hpl_mclk.c \ -- cgit v1.3.1 From 704412bb481c285dded617aacb29c7346baf6bf4 Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 3 May 2024 16:15:29 +0700 Subject: add cmake for tm4c --- .github/workflows/build_arm.yml | 3 +- .github/workflows/build_cmake.yml | 3 +- hw/bsp/tm4c/FreeRTOSConfig/FreeRTOSConfig.h | 149 +++++++++++++++++++++ hw/bsp/tm4c/boards/ek_tm4c123gxl/board.cmake | 12 ++ hw/bsp/tm4c/boards/ek_tm4c123gxl/board.h | 52 ++++++++ hw/bsp/tm4c/boards/ek_tm4c123gxl/board.mk | 13 ++ hw/bsp/tm4c/boards/ek_tm4c123gxl/tm4c123.ld | 66 +++++++++ hw/bsp/tm4c/family.c | 177 +++++++++++++++++++++++++ hw/bsp/tm4c/family.cmake | 95 +++++++++++++ hw/bsp/tm4c/family.mk | 28 ++++ hw/bsp/tm4c123/boards/ek_tm4c123gxl/board.h | 52 -------- hw/bsp/tm4c123/boards/ek_tm4c123gxl/board.mk | 11 -- hw/bsp/tm4c123/boards/ek_tm4c123gxl/tm4c123.ld | 65 --------- hw/bsp/tm4c123/family.c | 177 ------------------------- hw/bsp/tm4c123/family.mk | 30 ----- tools/get_deps.py | 7 +- 16 files changed, 599 insertions(+), 341 deletions(-) create mode 100644 hw/bsp/tm4c/FreeRTOSConfig/FreeRTOSConfig.h create mode 100644 hw/bsp/tm4c/boards/ek_tm4c123gxl/board.cmake create mode 100644 hw/bsp/tm4c/boards/ek_tm4c123gxl/board.h create mode 100644 hw/bsp/tm4c/boards/ek_tm4c123gxl/board.mk create mode 100644 hw/bsp/tm4c/boards/ek_tm4c123gxl/tm4c123.ld create mode 100644 hw/bsp/tm4c/family.c create mode 100644 hw/bsp/tm4c/family.cmake create mode 100644 hw/bsp/tm4c/family.mk delete mode 100644 hw/bsp/tm4c123/boards/ek_tm4c123gxl/board.h delete mode 100644 hw/bsp/tm4c123/boards/ek_tm4c123gxl/board.mk delete mode 100644 hw/bsp/tm4c123/boards/ek_tm4c123gxl/tm4c123.ld delete mode 100644 hw/bsp/tm4c123/family.c delete mode 100644 hw/bsp/tm4c123/family.mk (limited to '.github/workflows') diff --git a/.github/workflows/build_arm.yml b/.github/workflows/build_arm.yml index 40dc77593..15f12550f 100644 --- a/.github/workflows/build_arm.yml +++ b/.github/workflows/build_arm.yml @@ -36,8 +36,7 @@ jobs: family: # Alphabetical order - 'mm32' - - 'same5x' - - 'tm4c123 xmc4000' + - 'xmc4000' steps: - name: Setup Python uses: actions/setup-python@v5 diff --git a/.github/workflows/build_cmake.yml b/.github/workflows/build_cmake.yml index 75ce707aa..3fb277d00 100644 --- a/.github/workflows/build_cmake.yml +++ b/.github/workflows/build_cmake.yml @@ -48,7 +48,7 @@ jobs: - 'nrf' - 'ra' - 'rp2040' - - 'samd11 samd21 saml2x samd51' + - 'samd11 samd21 saml2x samd5x_e5x' - 'stm32f0' - 'stm32f1' - 'stm32f2' @@ -62,6 +62,7 @@ jobs: - 'stm32l4' - 'stm32u5' - 'stm32wb' + - 'tm4c' steps: - name: Setup Python uses: actions/setup-python@v5 diff --git a/hw/bsp/tm4c/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/tm4c/FreeRTOSConfig/FreeRTOSConfig.h new file mode 100644 index 000000000..3dd5a1ee1 --- /dev/null +++ b/hw/bsp/tm4c/FreeRTOSConfig/FreeRTOSConfig.h @@ -0,0 +1,149 @@ +/* + * FreeRTOS Kernel V10.0.0 + * Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. If you wish to use our Amazon + * FreeRTOS name, please do so in a fair use way that does not cause confusion. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://www.FreeRTOS.org + * http://aws.amazon.com/freertos + * + * 1 tab == 4 spaces! + */ + + +#ifndef FREERTOS_CONFIG_H +#define FREERTOS_CONFIG_H + +/*----------------------------------------------------------- + * Application specific definitions. + * + * These definitions should be adjusted for your particular hardware and + * application requirements. + * + * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE + * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE. + * + * See http://www.freertos.org/a00110.html. + *----------------------------------------------------------*/ + +// skip if included from IAR assembler +#ifndef __IASMARM__ + #include "msp.h" +#endif + +/* Cortex M23/M33 port configuration. */ +#define configENABLE_MPU 0 +#define configENABLE_FPU 1 +#define configENABLE_TRUSTZONE 0 +#define configMINIMAL_SECURE_STACK_SIZE (1024) + +#define configUSE_PREEMPTION 1 +#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0 +#define configCPU_CLOCK_HZ SystemCoreClock +#define configTICK_RATE_HZ ( 1000 ) +#define configMAX_PRIORITIES ( 5 ) +#define configMINIMAL_STACK_SIZE ( 128 ) +#define configTOTAL_HEAP_SIZE ( configSUPPORT_DYNAMIC_ALLOCATION*4*1024 ) +#define configMAX_TASK_NAME_LEN 16 +#define configUSE_16_BIT_TICKS 0 +#define configIDLE_SHOULD_YIELD 1 +#define configUSE_MUTEXES 1 +#define configUSE_RECURSIVE_MUTEXES 1 +#define configUSE_COUNTING_SEMAPHORES 1 +#define configQUEUE_REGISTRY_SIZE 4 +#define configUSE_QUEUE_SETS 0 +#define configUSE_TIME_SLICING 0 +#define configUSE_NEWLIB_REENTRANT 0 +#define configENABLE_BACKWARD_COMPATIBILITY 1 +#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 + +#define configSUPPORT_STATIC_ALLOCATION 1 +#define configSUPPORT_DYNAMIC_ALLOCATION 0 + +/* Hook function related definitions. */ +#define configUSE_IDLE_HOOK 0 +#define configUSE_TICK_HOOK 0 +#define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning +#define configCHECK_FOR_STACK_OVERFLOW 2 +#define configCHECK_HANDLER_INSTALLATION 0 + +/* Run time and task stats gathering related definitions. */ +#define configGENERATE_RUN_TIME_STATS 0 +#define configRECORD_STACK_HIGH_ADDRESS 1 +#define configUSE_TRACE_FACILITY 1 // legacy trace +#define configUSE_STATS_FORMATTING_FUNCTIONS 0 + +/* Co-routine definitions. */ +#define configUSE_CO_ROUTINES 0 +#define configMAX_CO_ROUTINE_PRIORITIES 2 + +/* Software timer related definitions. */ +#define configUSE_TIMERS 1 +#define configTIMER_TASK_PRIORITY (configMAX_PRIORITIES-2) +#define configTIMER_QUEUE_LENGTH 32 +#define configTIMER_TASK_STACK_DEPTH configMINIMAL_STACK_SIZE + +/* Optional functions - most linkers will remove unused functions anyway. */ +#define INCLUDE_vTaskPrioritySet 0 +#define INCLUDE_uxTaskPriorityGet 0 +#define INCLUDE_vTaskDelete 0 +#define INCLUDE_vTaskSuspend 1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY +#define INCLUDE_xResumeFromISR 0 +#define INCLUDE_vTaskDelayUntil 1 +#define INCLUDE_vTaskDelay 1 +#define INCLUDE_xTaskGetSchedulerState 0 +#define INCLUDE_xTaskGetCurrentTaskHandle 1 +#define INCLUDE_uxTaskGetStackHighWaterMark 0 +#define INCLUDE_xTaskGetIdleTaskHandle 0 +#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0 +#define INCLUDE_pcTaskGetTaskName 0 +#define INCLUDE_eTaskGetState 0 +#define INCLUDE_xEventGroupSetBitFromISR 0 +#define INCLUDE_xTimerPendFunctionCall 0 + +/* FreeRTOS hooks to NVIC vectors */ +#define xPortPendSVHandler PendSV_Handler +#define xPortSysTickHandler SysTick_Handler +#define vPortSVCHandler SVC_Handler + +//--------------------------------------------------------------------+ +// Interrupt nesting behavior configuration. +//--------------------------------------------------------------------+ + +// For Cortex-M specific: __NVIC_PRIO_BITS is defined in mcu header +#define configPRIO_BITS 3 + +/* The lowest interrupt priority that can be used in a call to a "set priority" function. */ +#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY ((1<FLASH + + .data : AT(ADDR(.text) + SIZEOF(.text)) + { + . = ALIGN(4); + __start_data = . ; + __la_data = LOADADDR(.data); + *(.data) + *(.data.*) + . = ALIGN(4); + __end_data = . ; + + } >SRAM + + .bss : + { + . = ALIGN(4) ; + __start_bss = . ; + __bss_start__ = __start_bss; + *(.bss) + *(.bss.*) + *(.COMMON) + __end_bss = . ; + . = ALIGN(4); + }>SRAM + + /* User_heap_stack section, used to check that there is enough RAM left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >SRAM +} diff --git a/hw/bsp/tm4c/family.c b/hw/bsp/tm4c/family.c new file mode 100644 index 000000000..738bc3fa0 --- /dev/null +++ b/hw/bsp/tm4c/family.c @@ -0,0 +1,177 @@ +#include "TM4C123.h" +#include "bsp/board_api.h" +#include "board.h" + +//--------------------------------------------------------------------+ +// Forward USB interrupt events to TinyUSB IRQ Handler +//--------------------------------------------------------------------+ +void USB0_Handler(void) +{ +#if CFG_TUH_ENABLED + tuh_int_handler(0, true); +#endif + +#if CFG_TUD_ENABLED + tud_int_handler(0); +#endif +} + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM +//--------------------------------------------------------------------+ + +static void board_uart_init (void) +{ + SYSCTL->RCGCUART |= (1 << 0); // Enable the clock to UART0 + SYSCTL->RCGCGPIO |= (1 << 0); // Enable the clock to GPIOA + + GPIOA->AFSEL |= (1 << 1) | (1 << 0); // Enable the alternate function on pin PA0 & PA1 + GPIOA->PCTL |= (1 << 0) | (1 << 4); // Configure the GPIOPCTL register to select UART0 in PA0 and PA1 + GPIOA->DEN |= (1 << 0) | (1 << 1); // Enable the digital functionality in PA0 and PA1 + + // BAUDRATE = 115200, with SystemCoreClock = 50 Mhz refer manual for calculation + // - BRDI = SystemCoreClock / (16* baud) + // - BRDF = int(fraction*64 + 0.5) + UART0->CTL &= ~(1 << 0); // Disable UART0 by clearing UARTEN bit in the UARTCTL register + UART0->IBRD = 27; // Write the integer portion of the BRD to the UARTIRD register + UART0->FBRD = 8; // Write the fractional portion of the BRD to the UARTFBRD registerer + + UART0->LCRH = (0x3 << 5); // 8-bit, no parity, 1 stop bit + UART0->CC = 0x0; // Configure the UART clock source as system clock + + UART0->CTL = (1 << 0) | (1 << 8) | (1 << 9); // UART0 Enable, Transmit Enable, Receive Enable +} + +static void initialize_board_led (GPIOA_Type *port, uint8_t PinMsk, uint8_t dirmsk) +{ + /* Enable PortF Clock */ + SYSCTL->RCGCGPIO |= (1 << 5); + + /* Let the clock stabilize */ + while ( !((SYSCTL->PRGPIO) & (1 << 5)) ) {} + + /* Port Digital Enable */ + port->DEN |= PinMsk; + + /* Set direction */ + port->DIR = dirmsk; +} + +static void board_switch_init (void) +{ + GPIOF->DIR &= ~(1 << BOARD_BTN); + GPIOF->PUR |= (1 << BOARD_BTN); + GPIOF->DEN |= (1 << BOARD_BTN); +} + +static void WriteGPIOPin (GPIOA_Type *port, uint8_t PinMsk, bool state) +{ + if ( state ) + { + port->DATA |= PinMsk; + } + else + { + port->DATA &= ~(PinMsk); + } +} + +static uint32_t ReadGPIOPin (GPIOA_Type *port, uint8_t pinMsk) +{ + return (port->DATA & pinMsk); +} + +void board_init (void) +{ + SystemCoreClockUpdate(); + +#if CFG_TUSB_OS == OPT_OS_NONE + // 1ms tick timer + SysTick_Config(SystemCoreClock / 1000); +#elif CFG_TUSB_OS == OPT_OS_FREERTOS + // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) + NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); +#endif + + /* Reset USB */ + SYSCTL->SRCR2 |= (1u << 16); + + for ( volatile uint8_t i = 0; i < 20; i++ ) {} + + SYSCTL->SRCR2 &= ~(1u << 16); + + /* Open the USB clock gate */ + SYSCTL->RCGCUSB |= (1 << 0); + + /* Power-up USB PLL */ + SYSCTL->RCC2 &= ~(1u << 14); + + /* USB IO Initialization */ + SYSCTL->RCGCGPIO |= (1u << 3); + + /* Let the clock stabilize */ + while ( !(SYSCTL->PRGPIO & (1u << 3)) ) {} + + /* USB IOs to Analog Mode */ + GPIOD->AFSEL &= ~((1u << 4) | (1u << 5)); + GPIOD->DEN &= ~((1u << 4) | (1u << 5)); + GPIOD->AMSEL |= ((1u << 4) | (1u << 5)); + + uint8_t leds = (1 << LED_PIN_RED) | (1 << LED_PIN_BLUE) | (1 << LED_PIN_GREEN); + uint8_t dirmsk = (1 << LED_PIN_RED) | (1 << LED_PIN_BLUE) | (1 << LED_PIN_GREEN); + + /* Configure GPIO for board LED */ + initialize_board_led(LED_PORT, leds, dirmsk); + + /* Configure GPIO for board switch */ + board_switch_init(); + + /* Initialize board UART */ + board_uart_init(); + + TU_LOG1_INT(SystemCoreClock); +} + +void board_led_write (bool state) +{ + WriteGPIOPin(LED_PORT, (1 << LED_PIN_BLUE), state); +} + +uint32_t board_button_read (void) +{ + uint32_t gpio_value = ReadGPIOPin(BOARD_BTN_PORT, BOARD_BTN_Msk); + return BUTTON_STATE_ACTIVE ? gpio_value : !gpio_value; +} + +int board_uart_write (void const *buf, int len) +{ + uint8_t const * data = buf; + + for ( int i = 0; i < len; i++ ) + { + while ( (UART0->FR & (1 << 5)) != 0 ) {} // Poll until previous data was shofted out + UART0->DR = data[i]; // Write UART0 DATA REGISTER + } + + return len; +} + +int board_uart_read (uint8_t *buf, int len) +{ + (void) buf; + (void) len; + return 0; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; +void SysTick_Handler (void) +{ + system_ticks++; +} + +uint32_t board_millis (void) +{ + return system_ticks; +} +#endif diff --git a/hw/bsp/tm4c/family.cmake b/hw/bsp/tm4c/family.cmake new file mode 100644 index 000000000..f7ab2fb28 --- /dev/null +++ b/hw/bsp/tm4c/family.cmake @@ -0,0 +1,95 @@ +include_guard() + +include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) + +set(MCU_VARIANT tm4c${MCU_SUB_VARIANT}) +set(MCU_VARIANT_UPPER TM4C${MCU_SUB_VARIANT}) + +set(SDK_DIR ${TOP}/hw/mcu/ti/${MCU_VARIANT}xx) +set(CMSIS_DIR ${TOP}/lib/CMSIS_5) + +# toolchain set up +set(CMAKE_SYSTEM_PROCESSOR cortex-m4 CACHE INTERNAL "System Processor") +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) + +set(FAMILY_MCUS TM4C123 CACHE INTERNAL "") + +#------------------------------------ +# BOARD_TARGET +#------------------------------------ +# only need to be built ONCE for all examples +function(add_board_target BOARD_TARGET) + if (TARGET ${BOARD_TARGET}) + return() + endif() + + set(LD_FILE_Clang ${LD_FILE_GNU}) + + set(STARTUP_FILE_GNU ${SDK_DIR}/Source/GCC/${MCU_VARIANT}_startup.c) + set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) + + add_library(${BOARD_TARGET} STATIC + ${SDK_DIR}/Source/system_${MCU_VARIANT_UPPER}.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} + ) + target_include_directories(${BOARD_TARGET} PUBLIC + ${SDK_DIR}/Include/${MCU_VARIANT_UPPER} + ${CMSIS_DIR}/CMSIS/Core/Include + ) + + update_board(${BOARD_TARGET}) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + --specs=nosys.specs --specs=nano.specs + -uvectors + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + message(FATAL_ERROR "Clang is not supported for MSP432E4") + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () +endfunction() + + +#------------------------------------ +# Functions +#------------------------------------ +function(family_configure_example TARGET RTOS) + family_configure_common(${TARGET} ${RTOS}) + + # Board target + add_board_target(board_${BOARD}) + + #---------- Port Specific ---------- + # These files are built for each example since it depends on example's tusb_config.h + target_sources(${TARGET} PUBLIC + # BSP + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ) + target_include_directories(${TARGET} PUBLIC + # family, hw, board + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} + ) + + # Add TinyUSB target and port source + family_add_tinyusb(${TARGET} OPT_MCU_TM4C123 ${RTOS}) + target_sources(${TARGET}-tinyusb PUBLIC + ${TOP}/src/portable/mentor/musb/dcd_musb.c + ${TOP}/src/portable/mentor/musb/hcd_musb.c + ) + target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + + # Link dependencies + target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) + + # Flashing + family_add_bin_hex(${TARGET}) + family_flash_openocd(${TARGET} ${OPENOCD_OPTION}) +endfunction() diff --git a/hw/bsp/tm4c/family.mk b/hw/bsp/tm4c/family.mk new file mode 100644 index 000000000..76ae785b2 --- /dev/null +++ b/hw/bsp/tm4c/family.mk @@ -0,0 +1,28 @@ +include $(TOP)/$(BOARD_PATH)/board.mk +CPU_CORE ?= cortex-m4 + +MCU_VARIANT = tm4c${MCU_SUB_VARIANT} +MCU_VARIANT_UPPER = TM4C${MCU_SUB_VARIANT} + +SDK_DIR = hw/mcu/ti/${MCU_VARIANT}xx + +CFLAGS += \ + -flto \ + -DCFG_TUSB_MCU=OPT_MCU_TM4C123 \ + -uvectors \ + +# mcu driver cause following warnings +CFLAGS += -Wno-error=strict-prototypes -Wno-error=cast-qual + +LDFLAGS_GCC += --specs=nosys.specs --specs=nano.specs + +INC += \ + $(TOP)/lib/CMSIS_5/CMSIS/Core/Include \ + $(TOP)/$(SDK_DIR)/Include/${MCU_VARIANT_UPPER} \ + $(TOP)/$(BOARD_PATH) + +SRC_C += \ + src/portable/mentor/musb/dcd_musb.c \ + src/portable/mentor/musb/hcd_musb.c \ + $(SDK_DIR)/Source/system_${MCU_VARIANT_UPPER}.c \ + $(SDK_DIR)/Source/GCC/${MCU_VARIANT}_startup.c diff --git a/hw/bsp/tm4c123/boards/ek_tm4c123gxl/board.h b/hw/bsp/tm4c123/boards/ek_tm4c123gxl/board.h deleted file mode 100644 index 5732056ae..000000000 --- a/hw/bsp/tm4c123/boards/ek_tm4c123gxl/board.h +++ /dev/null @@ -1,52 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2021, Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#ifndef _BOARD_H_ -#define _BOARD_H_ - -#ifdef __cplusplus - extern "C" { -#endif - -#define BOARD_UART UART0 -#define BOARD_UART_PORT GPIOA - -#define BOARD_BTN_PORT GPIOF -#define BOARD_BTN 4 -#define BOARD_BTN_Msk (1u<<4) -#define BUTTON_STATE_ACTIVE 0 - -#define LED_PORT GPIOF -#define LED_PIN_RED 1 -#define LED_PIN_BLUE 2 -#define LED_PIN_GREEN 3 -#define LED_STATE_ON 1 - -#ifdef __cplusplus - } -#endif - -#endif diff --git a/hw/bsp/tm4c123/boards/ek_tm4c123gxl/board.mk b/hw/bsp/tm4c123/boards/ek_tm4c123gxl/board.mk deleted file mode 100644 index 0ff24ab60..000000000 --- a/hw/bsp/tm4c123/boards/ek_tm4c123gxl/board.mk +++ /dev/null @@ -1,11 +0,0 @@ -CFLAGS += -DTM4C123GH6PM - -LD_FILE = $(BOARD_PATH)/tm4c123.ld - -# For flash-jlink target -JLINK_DEVICE = TM4C123GH6PM - -# flash using openocd -OPENOCD_OPTION = -f board/ti_ek-tm4c123gxl.cfg - -flash: flash-openocd diff --git a/hw/bsp/tm4c123/boards/ek_tm4c123gxl/tm4c123.ld b/hw/bsp/tm4c123/boards/ek_tm4c123gxl/tm4c123.ld deleted file mode 100644 index 351857bd6..000000000 --- a/hw/bsp/tm4c123/boards/ek_tm4c123gxl/tm4c123.ld +++ /dev/null @@ -1,65 +0,0 @@ -ENTRY(Reset_Handler) - -_estack = 0x20008000; /* end of RAM */ -/* Generate a link error if heap and stack don't fit into RAM */ -_Min_Heap_Size = 0; /* required amount of heap */ -_Min_Stack_Size = 0x1000; /* required amount of stack */ - - -MEMORY -{ - FLASH(rx) : ORIGIN = 0x00000000, LENGTH = 256K - SRAM(rwx) : ORIGIN = 0x20000000, LENGTH = 32K -} - -SECTIONS -{ - .text : - { - . = ALIGN(4) ; - *(.vectors) - *(.text) - *(.text.*) - *(.init) - *(.fini) - *(.rodata) - *(.rodata.*) - . = ALIGN(4) ; - __end_text = . ; - } >FLASH - - .data : AT(ADDR(.text) + SIZEOF(.text)) - { - . = ALIGN(4); - __start_data = . ; - __la_data = LOADADDR(.data); - *(.data) - *(.data.*) - . = ALIGN(4); - __end_data = . ; - - } >SRAM - - .bss : - { - . = ALIGN(4) ; - __start_bss = . ; - __bss_start__ = __start_bss; - *(.bss) - *(.bss.*) - *(.COMMON) - __end_bss = . ; - . = ALIGN(4); - }>SRAM - - /* User_heap_stack section, used to check that there is enough RAM left */ - ._user_heap_stack : - { - . = ALIGN(8); - PROVIDE ( end = . ); - PROVIDE ( _end = . ); - . = . + _Min_Heap_Size; - . = . + _Min_Stack_Size; - . = ALIGN(8); - } >SRAM -} diff --git a/hw/bsp/tm4c123/family.c b/hw/bsp/tm4c123/family.c deleted file mode 100644 index 738bc3fa0..000000000 --- a/hw/bsp/tm4c123/family.c +++ /dev/null @@ -1,177 +0,0 @@ -#include "TM4C123.h" -#include "bsp/board_api.h" -#include "board.h" - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ -void USB0_Handler(void) -{ -#if CFG_TUH_ENABLED - tuh_int_handler(0, true); -#endif - -#if CFG_TUD_ENABLED - tud_int_handler(0); -#endif -} - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM -//--------------------------------------------------------------------+ - -static void board_uart_init (void) -{ - SYSCTL->RCGCUART |= (1 << 0); // Enable the clock to UART0 - SYSCTL->RCGCGPIO |= (1 << 0); // Enable the clock to GPIOA - - GPIOA->AFSEL |= (1 << 1) | (1 << 0); // Enable the alternate function on pin PA0 & PA1 - GPIOA->PCTL |= (1 << 0) | (1 << 4); // Configure the GPIOPCTL register to select UART0 in PA0 and PA1 - GPIOA->DEN |= (1 << 0) | (1 << 1); // Enable the digital functionality in PA0 and PA1 - - // BAUDRATE = 115200, with SystemCoreClock = 50 Mhz refer manual for calculation - // - BRDI = SystemCoreClock / (16* baud) - // - BRDF = int(fraction*64 + 0.5) - UART0->CTL &= ~(1 << 0); // Disable UART0 by clearing UARTEN bit in the UARTCTL register - UART0->IBRD = 27; // Write the integer portion of the BRD to the UARTIRD register - UART0->FBRD = 8; // Write the fractional portion of the BRD to the UARTFBRD registerer - - UART0->LCRH = (0x3 << 5); // 8-bit, no parity, 1 stop bit - UART0->CC = 0x0; // Configure the UART clock source as system clock - - UART0->CTL = (1 << 0) | (1 << 8) | (1 << 9); // UART0 Enable, Transmit Enable, Receive Enable -} - -static void initialize_board_led (GPIOA_Type *port, uint8_t PinMsk, uint8_t dirmsk) -{ - /* Enable PortF Clock */ - SYSCTL->RCGCGPIO |= (1 << 5); - - /* Let the clock stabilize */ - while ( !((SYSCTL->PRGPIO) & (1 << 5)) ) {} - - /* Port Digital Enable */ - port->DEN |= PinMsk; - - /* Set direction */ - port->DIR = dirmsk; -} - -static void board_switch_init (void) -{ - GPIOF->DIR &= ~(1 << BOARD_BTN); - GPIOF->PUR |= (1 << BOARD_BTN); - GPIOF->DEN |= (1 << BOARD_BTN); -} - -static void WriteGPIOPin (GPIOA_Type *port, uint8_t PinMsk, bool state) -{ - if ( state ) - { - port->DATA |= PinMsk; - } - else - { - port->DATA &= ~(PinMsk); - } -} - -static uint32_t ReadGPIOPin (GPIOA_Type *port, uint8_t pinMsk) -{ - return (port->DATA & pinMsk); -} - -void board_init (void) -{ - SystemCoreClockUpdate(); - -#if CFG_TUSB_OS == OPT_OS_NONE - // 1ms tick timer - SysTick_Config(SystemCoreClock / 1000); -#elif CFG_TUSB_OS == OPT_OS_FREERTOS - // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) - NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); -#endif - - /* Reset USB */ - SYSCTL->SRCR2 |= (1u << 16); - - for ( volatile uint8_t i = 0; i < 20; i++ ) {} - - SYSCTL->SRCR2 &= ~(1u << 16); - - /* Open the USB clock gate */ - SYSCTL->RCGCUSB |= (1 << 0); - - /* Power-up USB PLL */ - SYSCTL->RCC2 &= ~(1u << 14); - - /* USB IO Initialization */ - SYSCTL->RCGCGPIO |= (1u << 3); - - /* Let the clock stabilize */ - while ( !(SYSCTL->PRGPIO & (1u << 3)) ) {} - - /* USB IOs to Analog Mode */ - GPIOD->AFSEL &= ~((1u << 4) | (1u << 5)); - GPIOD->DEN &= ~((1u << 4) | (1u << 5)); - GPIOD->AMSEL |= ((1u << 4) | (1u << 5)); - - uint8_t leds = (1 << LED_PIN_RED) | (1 << LED_PIN_BLUE) | (1 << LED_PIN_GREEN); - uint8_t dirmsk = (1 << LED_PIN_RED) | (1 << LED_PIN_BLUE) | (1 << LED_PIN_GREEN); - - /* Configure GPIO for board LED */ - initialize_board_led(LED_PORT, leds, dirmsk); - - /* Configure GPIO for board switch */ - board_switch_init(); - - /* Initialize board UART */ - board_uart_init(); - - TU_LOG1_INT(SystemCoreClock); -} - -void board_led_write (bool state) -{ - WriteGPIOPin(LED_PORT, (1 << LED_PIN_BLUE), state); -} - -uint32_t board_button_read (void) -{ - uint32_t gpio_value = ReadGPIOPin(BOARD_BTN_PORT, BOARD_BTN_Msk); - return BUTTON_STATE_ACTIVE ? gpio_value : !gpio_value; -} - -int board_uart_write (void const *buf, int len) -{ - uint8_t const * data = buf; - - for ( int i = 0; i < len; i++ ) - { - while ( (UART0->FR & (1 << 5)) != 0 ) {} // Poll until previous data was shofted out - UART0->DR = data[i]; // Write UART0 DATA REGISTER - } - - return len; -} - -int board_uart_read (uint8_t *buf, int len) -{ - (void) buf; - (void) len; - return 0; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void SysTick_Handler (void) -{ - system_ticks++; -} - -uint32_t board_millis (void) -{ - return system_ticks; -} -#endif diff --git a/hw/bsp/tm4c123/family.mk b/hw/bsp/tm4c123/family.mk deleted file mode 100644 index 49e39f6a0..000000000 --- a/hw/bsp/tm4c123/family.mk +++ /dev/null @@ -1,30 +0,0 @@ -DEPS_SUBMODULES += hw/mcu/ti -MCU_DIR=hw/mcu/ti/tm4c123xx - -include $(TOP)/$(BOARD_PATH)/board.mk -CPU_CORE ?= cortex-m4 - -CFLAGS += \ - -flto \ - -DCFG_TUSB_MCU=OPT_MCU_TM4C123 \ - -uvectors \ - -DTM4C123GH6PM - -# mcu driver cause following warnings -CFLAGS += -Wno-error=strict-prototypes -Wno-error=cast-qual - -LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs - -# All source paths should be relative to the top level. -LD_FILE = $(BOARD_PATH)/tm4c123.ld - -INC += \ - $(TOP)/$(MCU_DIR)/CMSIS/5.7.0/CMSIS/Include \ - $(TOP)/$(MCU_DIR)/Include/TM4C123 \ - $(TOP)/$(BOARD_PATH) - -SRC_C += \ - src/portable/mentor/musb/dcd_musb.c \ - src/portable/mentor/musb/hcd_musb.c \ - $(MCU_DIR)/Source/system_TM4C123.c \ - $(MCU_DIR)/Source/GCC/tm4c123_startup.c diff --git a/tools/get_deps.py b/tools/get_deps.py index bf6ef8c00..066f3e511 100644 --- a/tools/get_deps.py +++ b/tools/get_deps.py @@ -37,7 +37,7 @@ deps_optional = { 'xmc4000'], 'hw/mcu/microchip': ['https://github.com/hathach/microchip_driver.git', '9e8b37e307d8404033bb881623a113931e1edf27', - 'sam3x samd11 samd21 samd51 same5x same7x saml2x samg'], + 'sam3x samd11 samd21 samd51 samd5x_e5x same5x same7x saml2x samg'], 'hw/mcu/mindmotion/mm32sdk': ['https://github.com/hathach/mm32sdk.git', '0b79559eb411149d36e073c1635c620e576308d4', 'mm32'], @@ -166,7 +166,7 @@ deps_optional = { 'stm32wb'], 'hw/mcu/ti': ['https://github.com/hathach/ti_driver.git', '143ed6cc20a7615d042b03b21e070197d473e6e5', - 'msp430 msp432e4 tm4c123'], + 'msp430 msp432e4 tm4c'], 'hw/mcu/wch/ch32v307': ['https://github.com/openwch/ch32v307.git', '17761f5cf9dbbf2dcf665b7c04934188add20082', 'ch32v307'], @@ -179,7 +179,8 @@ deps_optional = { 'lpc11 lpc13 lpc15 lpc17 lpc18 lpc40 lpc43' 'stm32f0 stm32f1 stm32f2 stm32f3 stm32f4 stm32f7 stm32g0 stm32g4 stm32h5' 'stm32h7 stm32l0 stm32l1 stm32l4 stm32l5 stm32u5 stm32wb' - 'sam3x samd11 samd21 samd51 same5x same7x saml2x samg'], + 'sam3x samd11 samd21 samd51 same5x same7x saml2x samg' + 'tm4c'], 'lib/sct_neopixel': ['https://github.com/gsteiert/sct_neopixel.git', 'e73e04ca63495672d955f9268e003cffe168fcd8', 'lpc55'], -- cgit v1.3.1 From f38fbbfb2b663cf0977417cf313345f56475cdad Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 3 May 2024 16:48:55 +0700 Subject: add cmake for xmc4000 --- .github/workflows/build_arm.yml | 1 - .github/workflows/build_cmake.yml | 1 + hw/bsp/xmc4000/FreeRTOSConfig/FreeRTOSConfig.h | 149 ++++++++++++++++++++++++ hw/bsp/xmc4000/boards/xmc4500_relax/board.cmake | 10 ++ hw/bsp/xmc4000/boards/xmc4500_relax/board.mk | 2 +- hw/bsp/xmc4000/boards/xmc4700_relax/board.cmake | 10 ++ hw/bsp/xmc4000/boards/xmc4700_relax/board.mk | 2 +- hw/bsp/xmc4000/family.c | 41 +++---- hw/bsp/xmc4000/family.cmake | 97 +++++++++++++++ hw/bsp/xmc4000/family.mk | 28 +++-- 10 files changed, 303 insertions(+), 38 deletions(-) create mode 100644 hw/bsp/xmc4000/FreeRTOSConfig/FreeRTOSConfig.h create mode 100644 hw/bsp/xmc4000/boards/xmc4500_relax/board.cmake create mode 100644 hw/bsp/xmc4000/boards/xmc4700_relax/board.cmake create mode 100644 hw/bsp/xmc4000/family.cmake (limited to '.github/workflows') diff --git a/.github/workflows/build_arm.yml b/.github/workflows/build_arm.yml index 15f12550f..14c6d519c 100644 --- a/.github/workflows/build_arm.yml +++ b/.github/workflows/build_arm.yml @@ -36,7 +36,6 @@ jobs: family: # Alphabetical order - 'mm32' - - 'xmc4000' steps: - name: Setup Python uses: actions/setup-python@v5 diff --git a/.github/workflows/build_cmake.yml b/.github/workflows/build_cmake.yml index 3fb277d00..a1409b22c 100644 --- a/.github/workflows/build_cmake.yml +++ b/.github/workflows/build_cmake.yml @@ -63,6 +63,7 @@ jobs: - 'stm32u5' - 'stm32wb' - 'tm4c' + - 'xmc4000' steps: - name: Setup Python uses: actions/setup-python@v5 diff --git a/hw/bsp/xmc4000/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/xmc4000/FreeRTOSConfig/FreeRTOSConfig.h new file mode 100644 index 000000000..76eacea39 --- /dev/null +++ b/hw/bsp/xmc4000/FreeRTOSConfig/FreeRTOSConfig.h @@ -0,0 +1,149 @@ +/* + * FreeRTOS Kernel V10.0.0 + * Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. If you wish to use our Amazon + * FreeRTOS name, please do so in a fair use way that does not cause confusion. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://www.FreeRTOS.org + * http://aws.amazon.com/freertos + * + * 1 tab == 4 spaces! + */ + + +#ifndef FREERTOS_CONFIG_H +#define FREERTOS_CONFIG_H + +/*----------------------------------------------------------- + * Application specific definitions. + * + * These definitions should be adjusted for your particular hardware and + * application requirements. + * + * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE + * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE. + * + * See http://www.freertos.org/a00110.html. + *----------------------------------------------------------*/ + +// skip if included from IAR assembler +#ifndef __IASMARM__ + #include "xmc_device.h" +#endif + +/* Cortex M23/M33 port configuration. */ +#define configENABLE_MPU 0 +#define configENABLE_FPU 1 +#define configENABLE_TRUSTZONE 0 +#define configMINIMAL_SECURE_STACK_SIZE (1024) + +#define configUSE_PREEMPTION 1 +#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0 +#define configCPU_CLOCK_HZ SystemCoreClock +#define configTICK_RATE_HZ ( 1000 ) +#define configMAX_PRIORITIES ( 5 ) +#define configMINIMAL_STACK_SIZE ( 128 ) +#define configTOTAL_HEAP_SIZE ( configSUPPORT_DYNAMIC_ALLOCATION*4*1024 ) +#define configMAX_TASK_NAME_LEN 16 +#define configUSE_16_BIT_TICKS 0 +#define configIDLE_SHOULD_YIELD 1 +#define configUSE_MUTEXES 1 +#define configUSE_RECURSIVE_MUTEXES 1 +#define configUSE_COUNTING_SEMAPHORES 1 +#define configQUEUE_REGISTRY_SIZE 4 +#define configUSE_QUEUE_SETS 0 +#define configUSE_TIME_SLICING 0 +#define configUSE_NEWLIB_REENTRANT 0 +#define configENABLE_BACKWARD_COMPATIBILITY 1 +#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 + +#define configSUPPORT_STATIC_ALLOCATION 1 +#define configSUPPORT_DYNAMIC_ALLOCATION 0 + +/* Hook function related definitions. */ +#define configUSE_IDLE_HOOK 0 +#define configUSE_TICK_HOOK 0 +#define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning +#define configCHECK_FOR_STACK_OVERFLOW 2 +#define configCHECK_HANDLER_INSTALLATION 0 + +/* Run time and task stats gathering related definitions. */ +#define configGENERATE_RUN_TIME_STATS 0 +#define configRECORD_STACK_HIGH_ADDRESS 1 +#define configUSE_TRACE_FACILITY 1 // legacy trace +#define configUSE_STATS_FORMATTING_FUNCTIONS 0 + +/* Co-routine definitions. */ +#define configUSE_CO_ROUTINES 0 +#define configMAX_CO_ROUTINE_PRIORITIES 2 + +/* Software timer related definitions. */ +#define configUSE_TIMERS 1 +#define configTIMER_TASK_PRIORITY (configMAX_PRIORITIES-2) +#define configTIMER_QUEUE_LENGTH 32 +#define configTIMER_TASK_STACK_DEPTH configMINIMAL_STACK_SIZE + +/* Optional functions - most linkers will remove unused functions anyway. */ +#define INCLUDE_vTaskPrioritySet 0 +#define INCLUDE_uxTaskPriorityGet 0 +#define INCLUDE_vTaskDelete 0 +#define INCLUDE_vTaskSuspend 1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY +#define INCLUDE_xResumeFromISR 0 +#define INCLUDE_vTaskDelayUntil 1 +#define INCLUDE_vTaskDelay 1 +#define INCLUDE_xTaskGetSchedulerState 0 +#define INCLUDE_xTaskGetCurrentTaskHandle 1 +#define INCLUDE_uxTaskGetStackHighWaterMark 0 +#define INCLUDE_xTaskGetIdleTaskHandle 0 +#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0 +#define INCLUDE_pcTaskGetTaskName 0 +#define INCLUDE_eTaskGetState 0 +#define INCLUDE_xEventGroupSetBitFromISR 0 +#define INCLUDE_xTimerPendFunctionCall 0 + +/* FreeRTOS hooks to NVIC vectors */ +#define xPortPendSVHandler PendSV_Handler +#define xPortSysTickHandler SysTick_Handler +#define vPortSVCHandler SVC_Handler + +//--------------------------------------------------------------------+ +// Interrupt nesting behavior configuration. +//--------------------------------------------------------------------+ + +// For Cortex-M specific: __NVIC_PRIO_BITS is defined in mcu header +#define configPRIO_BITS 6 + +/* The lowest interrupt priority that can be used in a call to a "set priority" function. */ +#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY ((1< Date: Fri, 3 May 2024 18:12:55 +0700 Subject: fix ci --- .github/workflows/build_cmake.yml | 4 ++-- hw/bsp/tm4c/FreeRTOSConfig/FreeRTOSConfig.h | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to '.github/workflows') diff --git a/.github/workflows/build_cmake.yml b/.github/workflows/build_cmake.yml index a1409b22c..f0937cc85 100644 --- a/.github/workflows/build_cmake.yml +++ b/.github/workflows/build_cmake.yml @@ -113,7 +113,7 @@ jobs: cmake-build/cmake-build-feather_nrf52840_express/*/*/*.elf - name: Upload Artifacts for Hardware Testing (samd51) - if: matrix.family == 'samd51' && github.repository_owner == 'hathach' + if: matrix.family == 'samd5x_e5x' && github.repository_owner == 'hathach' uses: actions/upload-artifact@v4 with: name: itsybitsy_m4 @@ -139,7 +139,7 @@ jobs: #- 'ra' port later #- 'rp2040' port later - 'samd21' - - 'samd51' + - 'samd5x_e5x' - 'stm32f0' - 'stm32f1' - 'stm32f2' diff --git a/hw/bsp/tm4c/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/tm4c/FreeRTOSConfig/FreeRTOSConfig.h index 3dd5a1ee1..454b085e9 100644 --- a/hw/bsp/tm4c/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/tm4c/FreeRTOSConfig/FreeRTOSConfig.h @@ -44,7 +44,7 @@ // skip if included from IAR assembler #ifndef __IASMARM__ - #include "msp.h" + #include "TM4C123.h" #endif /* Cortex M23/M33 port configuration. */ -- cgit v1.3.1 From 666702f478dd91d5d2ea4f194d77f835844a19cd Mon Sep 17 00:00:00 2001 From: hathach Date: Sat, 4 May 2024 10:28:47 +0700 Subject: fix ci --- .github/workflows/build_cmake.yml | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to '.github/workflows') diff --git a/.github/workflows/build_cmake.yml b/.github/workflows/build_cmake.yml index f0937cc85..5140a507f 100644 --- a/.github/workflows/build_cmake.yml +++ b/.github/workflows/build_cmake.yml @@ -97,7 +97,7 @@ jobs: PICO_SDK_PATH: ${{ github.workspace }}/pico-sdk - name: Upload Artifacts for Hardware Testing (rp2040) - if: matrix.family == 'rp2040' && github.repository_owner == 'hathach' + if: contains(matrix.family, 'rp2040') && github.repository_owner == 'hathach' uses: actions/upload-artifact@v4 with: name: raspberry_pi_pico @@ -105,7 +105,7 @@ jobs: cmake-build/cmake-build-raspberry_pi_pico/*/*/*.elf - name: Upload Artifacts for Hardware Testing (nRF) - if: matrix.family == 'nrf' && github.repository_owner == 'hathach' + if: contains(matrix.family, 'nrf') && github.repository_owner == 'hathach' uses: actions/upload-artifact@v4 with: name: feather_nrf52840_express @@ -113,7 +113,7 @@ jobs: cmake-build/cmake-build-feather_nrf52840_express/*/*/*.elf - name: Upload Artifacts for Hardware Testing (samd51) - if: matrix.family == 'samd5x_e5x' && github.repository_owner == 'hathach' + if: contains(matrix.family, 'samd5x_e5x') && github.repository_owner == 'hathach' uses: actions/upload-artifact@v4 with: name: itsybitsy_m4 -- cgit v1.3.1 From 3791514908c768df18df1be0afdcb07f2c3596b7 Mon Sep 17 00:00:00 2001 From: hathach Date: Sat, 4 May 2024 17:23:16 +0700 Subject: add cmake for samg55 --- .github/workflows/build_cmake.yml | 2 +- .idea/cmake.xml | 10 +- hw/bsp/samg/FreeRTOSConfig/FreeRTOSConfig.h | 149 ++++++++++++++ hw/bsp/samg/boards/samg55_xplained/board.cmake | 8 + hw/bsp/samg/boards/samg55_xplained/board.h | 12 ++ hw/bsp/samg/boards/samg55_xplained/board.mk | 6 + .../samg/boards/samg55_xplained/samg55j19_flash.ld | 160 +++++++++++++++ hw/bsp/samg/family.c | 155 +++++++++++++++ hw/bsp/samg/family.cmake | 114 +++++++++++ hw/bsp/samg/family.mk | 45 +++++ hw/bsp/samg/hpl_usart_config.h | 215 +++++++++++++++++++++ hw/bsp/samg/peripheral_clk_config.h | 89 +++++++++ hw/bsp/samg55xplained/board.mk | 56 ------ hw/bsp/samg55xplained/hpl_usart_config.h | 215 --------------------- hw/bsp/samg55xplained/peripheral_clk_config.h | 85 -------- hw/bsp/samg55xplained/samg55j19_flash.ld | 158 --------------- hw/bsp/samg55xplained/samg55xplained.c | 157 --------------- 17 files changed, 960 insertions(+), 676 deletions(-) create mode 100644 hw/bsp/samg/FreeRTOSConfig/FreeRTOSConfig.h create mode 100644 hw/bsp/samg/boards/samg55_xplained/board.cmake create mode 100644 hw/bsp/samg/boards/samg55_xplained/board.h create mode 100644 hw/bsp/samg/boards/samg55_xplained/board.mk create mode 100644 hw/bsp/samg/boards/samg55_xplained/samg55j19_flash.ld create mode 100644 hw/bsp/samg/family.c create mode 100644 hw/bsp/samg/family.cmake create mode 100644 hw/bsp/samg/family.mk create mode 100644 hw/bsp/samg/hpl_usart_config.h create mode 100644 hw/bsp/samg/peripheral_clk_config.h delete mode 100644 hw/bsp/samg55xplained/board.mk delete mode 100644 hw/bsp/samg55xplained/hpl_usart_config.h delete mode 100644 hw/bsp/samg55xplained/peripheral_clk_config.h delete mode 100644 hw/bsp/samg55xplained/samg55j19_flash.ld delete mode 100644 hw/bsp/samg55xplained/samg55xplained.c (limited to '.github/workflows') diff --git a/.github/workflows/build_cmake.yml b/.github/workflows/build_cmake.yml index 5140a507f..050afe48f 100644 --- a/.github/workflows/build_cmake.yml +++ b/.github/workflows/build_cmake.yml @@ -48,7 +48,7 @@ jobs: - 'nrf' - 'ra' - 'rp2040' - - 'samd11 samd21 saml2x samd5x_e5x' + - 'samd11 samd21 saml2x samd5x_e5x samg' - 'stm32f0' - 'stm32f1' - 'stm32f2' diff --git a/.idea/cmake.xml b/.idea/cmake.xml index 2cb86676c..0e2ca61e4 100644 --- a/.idea/cmake.xml +++ b/.idea/cmake.xml @@ -66,7 +66,7 @@ - + @@ -119,11 +119,13 @@ - - + + - + + + \ No newline at end of file diff --git a/hw/bsp/samg/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/samg/FreeRTOSConfig/FreeRTOSConfig.h new file mode 100644 index 000000000..02223f766 --- /dev/null +++ b/hw/bsp/samg/FreeRTOSConfig/FreeRTOSConfig.h @@ -0,0 +1,149 @@ +/* + * FreeRTOS Kernel V10.0.0 + * Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. If you wish to use our Amazon + * FreeRTOS name, please do so in a fair use way that does not cause confusion. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://www.FreeRTOS.org + * http://aws.amazon.com/freertos + * + * 1 tab == 4 spaces! + */ + + +#ifndef FREERTOS_CONFIG_H +#define FREERTOS_CONFIG_H + +/*----------------------------------------------------------- + * Application specific definitions. + * + * These definitions should be adjusted for your particular hardware and + * application requirements. + * + * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE + * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE. + * + * See http://www.freertos.org/a00110.html. + *----------------------------------------------------------*/ + +// skip if included from IAR assembler +#ifndef __IASMARM__ + extern uint32_t SystemCoreClock; +#endif + +/* Cortex M23/M33 port configuration. */ +#define configENABLE_MPU 0 +#define configENABLE_FPU 1 +#define configENABLE_TRUSTZONE 0 +#define configMINIMAL_SECURE_STACK_SIZE (1024) + +#define configUSE_PREEMPTION 1 +#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0 +#define configCPU_CLOCK_HZ SystemCoreClock +#define configTICK_RATE_HZ ( 1000 ) +#define configMAX_PRIORITIES ( 5 ) +#define configMINIMAL_STACK_SIZE ( 128 ) +#define configTOTAL_HEAP_SIZE ( configSUPPORT_DYNAMIC_ALLOCATION*6*1024 ) +#define configMAX_TASK_NAME_LEN 16 +#define configUSE_16_BIT_TICKS 0 +#define configIDLE_SHOULD_YIELD 1 +#define configUSE_MUTEXES 1 +#define configUSE_RECURSIVE_MUTEXES 1 +#define configUSE_COUNTING_SEMAPHORES 1 +#define configQUEUE_REGISTRY_SIZE 4 +#define configUSE_QUEUE_SETS 0 +#define configUSE_TIME_SLICING 0 +#define configUSE_NEWLIB_REENTRANT 0 +#define configENABLE_BACKWARD_COMPATIBILITY 1 +#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 + +#define configSUPPORT_STATIC_ALLOCATION 1 +#define configSUPPORT_DYNAMIC_ALLOCATION 0 + +/* Hook function related definitions. */ +#define configUSE_IDLE_HOOK 0 +#define configUSE_TICK_HOOK 0 +#define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning +#define configCHECK_FOR_STACK_OVERFLOW 2 +#define configCHECK_HANDLER_INSTALLATION 0 + +/* Run time and task stats gathering related definitions. */ +#define configGENERATE_RUN_TIME_STATS 0 +#define configRECORD_STACK_HIGH_ADDRESS 1 +#define configUSE_TRACE_FACILITY 1 // legacy trace +#define configUSE_STATS_FORMATTING_FUNCTIONS 0 + +/* Co-routine definitions. */ +#define configUSE_CO_ROUTINES 0 +#define configMAX_CO_ROUTINE_PRIORITIES 2 + +/* Software timer related definitions. */ +#define configUSE_TIMERS 1 +#define configTIMER_TASK_PRIORITY (configMAX_PRIORITIES-2) +#define configTIMER_QUEUE_LENGTH 32 +#define configTIMER_TASK_STACK_DEPTH configMINIMAL_STACK_SIZE + +/* Optional functions - most linkers will remove unused functions anyway. */ +#define INCLUDE_vTaskPrioritySet 0 +#define INCLUDE_uxTaskPriorityGet 0 +#define INCLUDE_vTaskDelete 0 +#define INCLUDE_vTaskSuspend 1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY +#define INCLUDE_xResumeFromISR 0 +#define INCLUDE_vTaskDelayUntil 1 +#define INCLUDE_vTaskDelay 1 +#define INCLUDE_xTaskGetSchedulerState 0 +#define INCLUDE_xTaskGetCurrentTaskHandle 1 +#define INCLUDE_uxTaskGetStackHighWaterMark 0 +#define INCLUDE_xTaskGetIdleTaskHandle 0 +#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0 +#define INCLUDE_pcTaskGetTaskName 0 +#define INCLUDE_eTaskGetState 0 +#define INCLUDE_xEventGroupSetBitFromISR 0 +#define INCLUDE_xTimerPendFunctionCall 0 + +/* FreeRTOS hooks to NVIC vectors */ +#define xPortPendSVHandler PendSV_Handler +#define xPortSysTickHandler SysTick_Handler +#define vPortSVCHandler SVC_Handler + +//--------------------------------------------------------------------+ +// Interrupt nesting behavior configuration. +//--------------------------------------------------------------------+ + +// For Cortex-M specific: __NVIC_PRIO_BITS is defined in mcu header +#define configPRIO_BITS 4 + +/* The lowest interrupt priority that can be used in a call to a "set priority" function. */ +#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY ((1< rom + + /* .ARM.exidx is sorted, so has to go in its own output section. */ + PROVIDE_HIDDEN (__exidx_start = .); + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > rom + PROVIDE_HIDDEN (__exidx_end = .); + + . = ALIGN(4); + _etext = .; + + .relocate : AT (_etext) + { + . = ALIGN(4); + _srelocate = .; + *(.ramfunc .ramfunc.*); + *(.data .data.*); + . = ALIGN(4); + _erelocate = .; + } > ram + + /* .bss section which is used for uninitialized data */ + .bss (NOLOAD) : + { + . = ALIGN(4); + _sbss = . ; + _szero = .; + *(.bss .bss.*) + *(COMMON) + . = ALIGN(4); + _ebss = . ; + _ezero = .; + end = .; + } > ram + + /* heap section */ + .heap (NOLOAD): + { + . = ALIGN(8); + _sheap = .; + . = . + HEAP_SIZE; + . = ALIGN(8); + _eheap = .; + } > ram + + /* stack section */ + .stack (NOLOAD): + { + . = ALIGN(8); + _sstack = .; + . = . + STACK_SIZE; + . = ALIGN(8); + _estack = .; + } > ram + + . = ALIGN(4); + _end = . ; + _ram_end_ = ORIGIN(ram) + LENGTH(ram) - 1 ; +} diff --git a/hw/bsp/samg/family.c b/hw/bsp/samg/family.c new file mode 100644 index 000000000..63db5739d --- /dev/null +++ b/hw/bsp/samg/family.c @@ -0,0 +1,155 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019, hathach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + */ + +#include "sam.h" + +// Suppress warning caused by mcu driver +#ifdef __GNUC__ +#pragma GCC diagnostic push +#pragma GCC diagnostic ignored "-Wcast-qual" +#pragma GCC diagnostic ignored "-Wredundant-decls" +#endif + +#include "peripheral_clk_config.h" +#include "hal/include/hal_init.h" +#include "hal/include/hpl_usart_sync.h" +#include "hpl/pmc/hpl_pmc.h" +#include "hal/include/hal_gpio.h" + +#ifdef __GNUC__ +#pragma GCC diagnostic pop +#endif + +#include "bsp/board_api.h" +#include "board.h" + + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM DECLARATION +//--------------------------------------------------------------------+ +struct _usart_sync_device edbg_com; + +//------------- IMPLEMENTATION -------------// +void board_init(void) { + init_mcu(); + + _pmc_enable_periph_clock(ID_PIOA); + + /* Disable Watchdog */ + hri_wdt_set_MR_WDDIS_bit(WDT); + + // LED + gpio_set_pin_level(LED_PIN, false); + gpio_set_pin_direction(LED_PIN, GPIO_DIRECTION_OUT); + gpio_set_pin_function(LED_PIN, GPIO_PIN_FUNCTION_OFF); + + // Button + gpio_set_pin_direction(BUTTON_PIN, GPIO_DIRECTION_IN); + gpio_set_pin_pull_mode(BUTTON_PIN, GPIO_PULL_UP); + gpio_set_pin_function(BUTTON_PIN, GPIO_PIN_FUNCTION_OFF); + + // Uart via EDBG Com + _pmc_enable_periph_clock(ID_FLEXCOM7); + gpio_set_pin_function(UART_RX_PIN, MUX_PA27B_FLEXCOM7_RXD); + gpio_set_pin_function(UART_TX_PIN, MUX_PA28B_FLEXCOM7_TXD); + + _usart_sync_init(&edbg_com, FLEXCOM7); + _usart_sync_set_baud_rate(&edbg_com, CFG_BOARD_UART_BAUDRATE); + _usart_sync_set_mode(&edbg_com, USART_MODE_ASYNCHRONOUS); + _usart_sync_enable(&edbg_com); + +#if CFG_TUSB_OS == OPT_OS_NONE + // 1ms tick timer (samd SystemCoreClock may not correct) + SysTick_Config(CONF_CPU_FREQUENCY / 1000); +#elif CFG_TUSB_OS == OPT_OS_FREERTOS + NVIC_SetPriority(UDP_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); +#endif + + // USB Pin, Clock init + + /* Clear SYSIO 10 & 11 for USB DM & DP */ + hri_matrix_clear_CCFG_SYSIO_reg(MATRIX, CCFG_SYSIO_SYSIO10 | CCFG_SYSIO_SYSIO11); + + // Enable clock + _pmc_enable_periph_clock(ID_UDP); + + /* USB Device mode & Transceiver active */ + hri_matrix_write_CCFG_USBMR_reg(MATRIX, CCFG_USBMR_USBMODE); +} + +//--------------------------------------------------------------------+ +// USB Interrupt Handler +//--------------------------------------------------------------------+ +void UDP_Handler(void) { + #if CFG_TUD_ENABLED + tud_int_handler(0); + #endif +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) { + gpio_set_pin_level(LED_PIN, state); +} + +uint32_t board_button_read(void) { + return BUTTON_STATE_ACTIVE == gpio_get_pin_level(BUTTON_PIN); +} + +int board_uart_read(uint8_t* buf, int len) { + (void) buf; + (void) len; + return 0; +} + +int board_uart_write(void const* buf, int len) { + uint8_t const* buf8 = (uint8_t const*) buf; + for (int i = 0; i < len; i++) { + while (!_usart_sync_is_ready_to_send(&edbg_com)) {} + _usart_sync_write_byte(&edbg_com, buf8[i]); + } + return len; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; + +void SysTick_Handler(void) { + system_ticks++; +} + +uint32_t board_millis(void) { + return system_ticks; +} + +#endif + +// Required by __libc_init_array in startup code if we are compiling using +// -nostdlib/-nostartfiles. +void _init(void) { + +} diff --git a/hw/bsp/samg/family.cmake b/hw/bsp/samg/family.cmake new file mode 100644 index 000000000..b88097858 --- /dev/null +++ b/hw/bsp/samg/family.cmake @@ -0,0 +1,114 @@ +include_guard() + +set(SAM_FAMILY samg55) +set(SDK_DIR ${TOP}/hw/mcu/microchip/samg55) + +# include board specific +include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) + +# toolchain set up +set(CMAKE_SYSTEM_PROCESSOR cortex-m4 CACHE INTERNAL "System Processor") +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) + +set(FAMILY_MCUS SAMG CACHE INTERNAL "") +set(OPENOCD_OPTION "-f interface/cmsis-dap.cfg -c \"transport select swd\" -f target/at91samdXX.cfg") + +#------------------------------------ +# BOARD_TARGET +#------------------------------------ +# only need to be built ONCE for all examples +function(add_board_target BOARD_TARGET) + if (TARGET ${BOARD_TARGET}) + return() + endif () + + set(LD_FILE_Clang ${LD_FILE_GNU}) + if (NOT DEFINED LD_FILE_${CMAKE_C_COMPILER_ID}) + message(FATAL_ERROR "LD_FILE_${CMAKE_C_COMPILER_ID} not defined") + endif () + + set(STARTUP_FILE_GNU ${SDK_DIR}/${SAM_FAMILY}/gcc/gcc/startup_${SAM_FAMILY}.c) + set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) + + add_library(${BOARD_TARGET} STATIC + ${SDK_DIR}/${SAM_FAMILY}/gcc/system_${SAM_FAMILY}.c + ${SDK_DIR}/hal/src/hal_atomic.c + ${SDK_DIR}/hpl/core/hpl_init.c + ${SDK_DIR}/hpl/usart/hpl_usart.c + ${SDK_DIR}/hpl/pmc/hpl_pmc.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} + ) + target_include_directories(${BOARD_TARGET} PUBLIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${SDK_DIR} + ${SDK_DIR}/config + ${SDK_DIR}/samg55/include + ${SDK_DIR}/hal/include + ${SDK_DIR}/hal/utils/include + ${SDK_DIR}/hpl/core + ${SDK_DIR}/hpl/pio + ${SDK_DIR}/hpl/pmc + ${SDK_DIR}/hri + ${SDK_DIR}/CMSIS/Core/Include + ) + target_compile_definitions(${BOARD_TARGET} PUBLIC + ) + + update_board(${BOARD_TARGET}) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -nostartfiles + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_Clang}" + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () +endfunction() + + +#------------------------------------ +# Functions +#------------------------------------ +function(family_configure_example TARGET RTOS) + family_configure_common(${TARGET} ${RTOS}) + + # Board target + add_board_target(board_${BOARD}) + + #---------- Port Specific ---------- + # These files are built for each example since it depends on example's tusb_config.h + target_sources(${TARGET} PUBLIC + # BSP + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ) + target_include_directories(${TARGET} PUBLIC + # family, hw, board + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} + ) + + # Add TinyUSB target and port source + family_add_tinyusb(${TARGET} OPT_MCU_SAMG ${RTOS}) + target_sources(${TARGET}-tinyusb PUBLIC + ${TOP}/src/portable/microchip/samg/dcd_samg.c + ) + target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + + # Link dependencies + target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) + + # Flashing + family_add_bin_hex(${TARGET}) + family_flash_jlink(${TARGET}) + #family_flash_openocd(${TARGET} ${OPENOCD_OPTION}) +endfunction() diff --git a/hw/bsp/samg/family.mk b/hw/bsp/samg/family.mk new file mode 100644 index 000000000..39b4bc19f --- /dev/null +++ b/hw/bsp/samg/family.mk @@ -0,0 +1,45 @@ +include $(TOP)/$(BOARD_PATH)/board.mk +CPU_CORE ?= cortex-m4 + +SDK_DIR = hw/mcu/microchip/samg55 + +CFLAGS += \ + -flto \ + -DCFG_TUSB_MCU=OPT_MCU_SAMG + +# suppress following warnings from mcu driver +CFLAGS += -Wno-error=undef -Wno-error=null-dereference -Wno-error=redundant-decls + +# SAM driver is flooded with -Wcast-qual which slow down complication significantly +CFLAGS_SKIP += -Wcast-qual + +LDFLAGS_GCC += \ + -nostdlib -nostartfiles \ + --specs=nosys.specs --specs=nano.specs \ + +SRC_C += \ + src/portable/microchip/samg/dcd_samg.c \ + ${SDK_DIR}/samg55/gcc/gcc/startup_samg55.c \ + ${SDK_DIR}/samg55/gcc/system_samg55.c \ + ${SDK_DIR}/hal/src/hal_atomic.c \ + ${SDK_DIR}/hpl/core/hpl_init.c \ + ${SDK_DIR}/hpl/usart/hpl_usart.c \ + ${SDK_DIR}/hpl/pmc/hpl_pmc.c \ + +INC += \ + $(TOP)/$(FAMILY_PATH) \ + $(TOP)/$(BOARD_PATH) \ + $(TOP)/${SDK_DIR} \ + $(TOP)/${SDK_DIR}/config \ + $(TOP)/${SDK_DIR}/samg55/include \ + $(TOP)/${SDK_DIR}/hal/include \ + $(TOP)/${SDK_DIR}/hal/utils/include \ + $(TOP)/${SDK_DIR}/hpl/core \ + $(TOP)/${SDK_DIR}/hpl/pio \ + $(TOP)/${SDK_DIR}/hpl/pmc \ + $(TOP)/${SDK_DIR}/hri \ + $(TOP)/${SDK_DIR}/CMSIS/Core/Include + +# flash using edbg from https://github.com/ataradov/edbg +flash: $(BUILD)/$(PROJECT).bin + edbg --verbose -t samg55 -pv -f $< diff --git a/hw/bsp/samg/hpl_usart_config.h b/hw/bsp/samg/hpl_usart_config.h new file mode 100644 index 000000000..4f2837d2e --- /dev/null +++ b/hw/bsp/samg/hpl_usart_config.h @@ -0,0 +1,215 @@ +/* Auto-generated config file hpl_usart_config.h */ +#ifndef HPL_USART_CONFIG_H +#define HPL_USART_CONFIG_H + +// <<< Use Configuration Wizard in Context Menu >>> + +#include + +#ifndef CONF_USART_7_ENABLE +#define CONF_USART_7_ENABLE 1 +#endif + +// Basic Configuration + +// Frame parity +// <0x0=>Even parity +// <0x1=>Odd parity +// <0x2=>Parity forced to 0 +// <0x3=>Parity forced to 1 +// <0x4=>No parity +// Parity bit mode for USART frame +// usart_parity +#ifndef CONF_USART_7_PARITY +#define CONF_USART_7_PARITY 0x4 +#endif + +// Character Size +// <0x0=>5 bits +// <0x1=>6 bits +// <0x2=>7 bits +// <0x3=>8 bits +// Data character size in USART frame +// usart_character_size +#ifndef CONF_USART_7_CHSIZE +#define CONF_USART_7_CHSIZE 0x3 +#endif + +// Stop Bit +// <0=>1 stop bit +// <1=>1.5 stop bits +// <2=>2 stop bits +// Number of stop bits in USART frame +// usart_stop_bit +#ifndef CONF_USART_7_SBMODE +#define CONF_USART_7_SBMODE 0 +#endif + +// Clock Output Select +// <0=>The USART does not drive the SCK pin +// <1=>The USART drives the SCK pin if USCLKS does not select the external clock SCK +// Clock Output Select in USART sck, if in usrt master mode, please drive SCK. +// usart_clock_output_select +#ifndef CONF_USART_7_CLKO +#define CONF_USART_7_CLKO 0 +#endif + +// Baud rate <1-3000000> +// USART baud rate setting +// usart_baud_rate +#ifndef CONF_USART_7_BAUD +#define CONF_USART_7_BAUD 9600 +#endif + +// + +// Advanced configuration +// usart_advanced +#ifndef CONF_USART_7_ADVANCED_CONFIG +#define CONF_USART_7_ADVANCED_CONFIG 0 +#endif + +// Channel Mode +// <0=>Normal Mode +// <1=>Automatic Echo +// <2=>Local Loopback +// <3=>Remote Loopback +// Channel mode in USART frame +// usart_channel_mode +#ifndef CONF_USART_7_CHMODE +#define CONF_USART_7_CHMODE 0 +#endif + +// 9 bits character enable +// Enable 9 bits character, this has high priority than 5/6/7/8 bits. +// usart_9bits_enable +#ifndef CONF_USART_7_MODE9 +#define CONF_USART_7_MODE9 0 +#endif + +// Variable Sync +// <0=>User defined configuration +// <1=>sync field is updated when a character is written into US_THR +// Variable Synchronization of Command/Data Sync Start Frarm Delimiter +// variable_sync +#ifndef CONF_USART_7_VAR_SYNC +#define CONF_USART_7_VAR_SYNC 0 +#endif + +// Oversampling Mode +// <0=>16 Oversampling +// <1=>8 Oversampling +// Oversampling Mode in UART mode +// usart__oversampling_mode +#ifndef CONF_USART_7_OVER +#define CONF_USART_7_OVER 0 +#endif + +// Inhibit Non Ack +// <0=>The NACK is generated +// <1=>The NACK is not generated +// Inhibit Non Acknowledge +// usart__inack +#ifndef CONF_USART_7_INACK +#define CONF_USART_7_INACK 1 +#endif + +// Disable Successive NACK +// <0=>NACK is sent on the ISO line as soon as a parity error occurs +// <1=>Many parity errors generate a NACK on the ISO line +// Disable Successive NACK +// usart_dsnack +#ifndef CONF_USART_7_DSNACK +#define CONF_USART_7_DSNACK 0 +#endif + +// Inverted Data +// <0=>Data isn't inverted, nomal mode +// <1=>Data is inverted +// Inverted Data +// usart_invdata +#ifndef CONF_USART_7_INVDATA +#define CONF_USART_7_INVDATA 0 +#endif + +// Maximum Number of Automatic Iteration <0-7> +// Defines the maximum number of iterations in mode ISO7816, protocol T = 0. +// usart_max_iteration +#ifndef CONF_USART_7_MAX_ITERATION +#define CONF_USART_7_MAX_ITERATION 0 +#endif + +// Receive Line Filter enable +// whether the USART filters the receive line using a three-sample filter +// usart_receive_filter_enable +#ifndef CONF_USART_7_FILTER +#define CONF_USART_7_FILTER 0 +#endif + +// Manchester Encoder/Decoder Enable +// whether the USART Manchester Encoder/Decoder +// usart_manchester_filter_enable +#ifndef CONF_USART_7_MAN +#define CONF_USART_7_MAN 0 +#endif + +// Manchester Synchronization Mode +// <0=>The Manchester start bit is a 0 to 1 transition +// <1=>The Manchester start bit is a 1 to 0 transition +// Manchester Synchronization Mode +// usart_manchester_synchronization_mode +#ifndef CONF_USART_7_MODSYNC +#define CONF_USART_7_MODSYNC 0 +#endif + +// Start Frame Delimiter Selector +// <0=>Start frame delimiter is COMMAND or DATA SYNC +// <1=>Start frame delimiter is one bit +// Start Frame Delimiter Selector +// usart_start_frame_delimiter +#ifndef CONF_USART_7_ONEBIT +#define CONF_USART_7_ONEBIT 0 +#endif + +// Fractional Part <0-7> +// Fractional part of the baud rate if baud rate generator is in fractional mode +// usart_arch_fractional +#ifndef CONF_USART_7_FRACTIONAL +#define CONF_USART_7_FRACTIONAL 0x0 +#endif + +// Data Order +// <0=>LSB is transmitted first +// <1=>MSB is transmitted first +// Data order of the data bits in the frame +// usart_arch_msbf +#ifndef CONF_USART_7_MSBF +#define CONF_USART_7_MSBF 0 +#endif + +// + +#define CONF_USART_7_MODE 0x0 + +// Calculate BAUD register value in UART mode +#if CONF_FLEXCOM7_CK_SRC < 3 +#ifndef CONF_USART_7_BAUD_CD +#define CONF_USART_7_BAUD_CD ((CONF_FLEXCOM7_FREQUENCY) / CONF_USART_7_BAUD / 8 / (2 - CONF_USART_7_OVER)) +#endif +#ifndef CONF_USART_7_BAUD_FP +#define CONF_USART_7_BAUD_FP \ + ((CONF_FLEXCOM7_FREQUENCY) / CONF_USART_7_BAUD / (2 - CONF_USART_7_OVER) - 8 * CONF_USART_7_BAUD_CD) +#endif +#elif CONF_FLEXCOM7_CK_SRC == 3 +// No division is active. The value written in US_BRGR has no effect. +#ifndef CONF_USART_7_BAUD_CD +#define CONF_USART_7_BAUD_CD 1 +#endif +#ifndef CONF_USART_7_BAUD_FP +#define CONF_USART_7_BAUD_FP 1 +#endif +#endif + +// <<< end of configuration section >>> + +#endif // HPL_USART_CONFIG_H diff --git a/hw/bsp/samg/peripheral_clk_config.h b/hw/bsp/samg/peripheral_clk_config.h new file mode 100644 index 000000000..2fd817e89 --- /dev/null +++ b/hw/bsp/samg/peripheral_clk_config.h @@ -0,0 +1,89 @@ +/* Auto-generated config file peripheral_clk_config.h */ +#ifndef PERIPHERAL_CLK_CONFIG_H +#define PERIPHERAL_CLK_CONFIG_H + +// <<< Use Configuration Wizard in Context Menu >>> + +/** + * \def CONF_HCLK_FREQUENCY + * \brief HCLK's Clock frequency + */ +#ifndef CONF_HCLK_FREQUENCY +#define CONF_HCLK_FREQUENCY 8000000 +#endif + +/** + * \def CONF_FCLK_FREQUENCY + * \brief FCLK's Clock frequency + */ +#ifndef CONF_FCLK_FREQUENCY +#define CONF_FCLK_FREQUENCY 8000000 +#endif + +/** + * \def CONF_CPU_FREQUENCY + * \brief CPU's Clock frequency + */ +#ifndef CONF_CPU_FREQUENCY +#define CONF_CPU_FREQUENCY 8000000 +#endif + +/** + * \def CONF_SLCK_FREQUENCY + * \brief Slow Clock frequency + */ +#ifndef CONF_SLCK_FREQUENCY +#define CONF_SLCK_FREQUENCY 32768 +#endif + +/** + * \def CONF_MCK_FREQUENCY + * \brief Master Clock frequency + */ +#ifndef CONF_MCK_FREQUENCY +#define CONF_MCK_FREQUENCY 8000000 +#endif + +// USB Clock Source +// <0=> USB Clock Controller (USB_48M) +// usb_clock_source +// Select the clock source for USB. +#ifndef CONF_UDP_SRC +#define CONF_UDP_SRC 0 +#endif + +/** + * \def CONF_UDP_FREQUENCY + * \brief UDP's Clock frequency + */ +#ifndef CONF_UDP_FREQUENCY +#define CONF_UDP_FREQUENCY 48005120 +#endif + +// FLEXCOM Clock Settings +// FLEXCOM Clock source +// <0=> Master Clock (MCK) +// <1=> MCK / 8 +// <2=> Programmable Clock Controller 6 (PMC_PCK6) +// <2=> Programmable Clock Controller 7 (PMC_PCK7) +// <3=> External Clock +// This defines the clock source for the FLEXCOM, PCK6 is used for FLEXCOM0/1/2/3 and PCK7 is used for FLEXCOM4/5/6/7 +// flexcom_clock_source +#ifndef CONF_FLEXCOM7_CK_SRC +#define CONF_FLEXCOM7_CK_SRC 0 +#endif + +// FLEXCOM External Clock Input on SCK <1-4294967295> +// Inputs the external clock frequency on SCK +// flexcom_clock_freq +#ifndef CONF_FLEXCOM7_SCK_FREQ +#define CONF_FLEXCOM7_SCK_FREQ 10000000 +#endif + +#ifndef CONF_FLEXCOM7_FREQUENCY +#define CONF_FLEXCOM7_FREQUENCY 8000000 +#endif + +// <<< end of configuration section >>> + +#endif // PERIPHERAL_CLK_CONFIG_H diff --git a/hw/bsp/samg55xplained/board.mk b/hw/bsp/samg55xplained/board.mk deleted file mode 100644 index a9328be11..000000000 --- a/hw/bsp/samg55xplained/board.mk +++ /dev/null @@ -1,56 +0,0 @@ -DEPS_SUBMODULES += hw/mcu/microchip -ASF_DIR = hw/mcu/microchip/samg55 - -CFLAGS += \ - -flto \ - -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m4 \ - -mfloat-abi=hard \ - -mfpu=fpv4-sp-d16 \ - -nostdlib -nostartfiles \ - -D__SAMG55J19__ \ - -DCFG_TUSB_MCU=OPT_MCU_SAMG - -# suppress following warnings from mcu driver -CFLAGS += -Wno-error=undef -Wno-error=null-dereference -Wno-error=redundant-decls - -# SAM driver is flooded with -Wcast-qual which slow down complication significantly -CFLAGS_SKIP += -Wcast-qual - -LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs - -# All source paths should be relative to the top level. -LD_FILE = hw/bsp/$(BOARD)/samg55j19_flash.ld - -SRC_C += \ - src/portable/microchip/samg/dcd_samg.c \ - $(ASF_DIR)/samg55/gcc/gcc/startup_samg55.c \ - $(ASF_DIR)/samg55/gcc/system_samg55.c \ - $(ASF_DIR)/hpl/core/hpl_init.c \ - $(ASF_DIR)/hpl/usart/hpl_usart.c \ - $(ASF_DIR)/hpl/pmc/hpl_pmc.c \ - $(ASF_DIR)/hal/src/hal_atomic.c - -INC += \ - $(TOP)/hw/bsp/$(BOARD) \ - $(TOP)/$(ASF_DIR) \ - $(TOP)/$(ASF_DIR)/config \ - $(TOP)/$(ASF_DIR)/samg55/include \ - $(TOP)/$(ASF_DIR)/hal/include \ - $(TOP)/$(ASF_DIR)/hal/utils/include \ - $(TOP)/$(ASF_DIR)/hpl/core \ - $(TOP)/$(ASF_DIR)/hpl/pio \ - $(TOP)/$(ASF_DIR)/hpl/pmc \ - $(TOP)/$(ASF_DIR)/hri \ - $(TOP)/$(ASF_DIR)/CMSIS/Core/Include - -# For freeRTOS port source -FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM4F - -# For flash-jlink target -JLINK_DEVICE = ATSAMG55J19 - -# flash using edbg from https://github.com/ataradov/edbg -flash: $(BUILD)/$(PROJECT).bin - edbg --verbose -t samg55 -pv -f $< diff --git a/hw/bsp/samg55xplained/hpl_usart_config.h b/hw/bsp/samg55xplained/hpl_usart_config.h deleted file mode 100644 index 4f2837d2e..000000000 --- a/hw/bsp/samg55xplained/hpl_usart_config.h +++ /dev/null @@ -1,215 +0,0 @@ -/* Auto-generated config file hpl_usart_config.h */ -#ifndef HPL_USART_CONFIG_H -#define HPL_USART_CONFIG_H - -// <<< Use Configuration Wizard in Context Menu >>> - -#include - -#ifndef CONF_USART_7_ENABLE -#define CONF_USART_7_ENABLE 1 -#endif - -// Basic Configuration - -// Frame parity -// <0x0=>Even parity -// <0x1=>Odd parity -// <0x2=>Parity forced to 0 -// <0x3=>Parity forced to 1 -// <0x4=>No parity -// Parity bit mode for USART frame -// usart_parity -#ifndef CONF_USART_7_PARITY -#define CONF_USART_7_PARITY 0x4 -#endif - -// Character Size -// <0x0=>5 bits -// <0x1=>6 bits -// <0x2=>7 bits -// <0x3=>8 bits -// Data character size in USART frame -// usart_character_size -#ifndef CONF_USART_7_CHSIZE -#define CONF_USART_7_CHSIZE 0x3 -#endif - -// Stop Bit -// <0=>1 stop bit -// <1=>1.5 stop bits -// <2=>2 stop bits -// Number of stop bits in USART frame -// usart_stop_bit -#ifndef CONF_USART_7_SBMODE -#define CONF_USART_7_SBMODE 0 -#endif - -// Clock Output Select -// <0=>The USART does not drive the SCK pin -// <1=>The USART drives the SCK pin if USCLKS does not select the external clock SCK -// Clock Output Select in USART sck, if in usrt master mode, please drive SCK. -// usart_clock_output_select -#ifndef CONF_USART_7_CLKO -#define CONF_USART_7_CLKO 0 -#endif - -// Baud rate <1-3000000> -// USART baud rate setting -// usart_baud_rate -#ifndef CONF_USART_7_BAUD -#define CONF_USART_7_BAUD 9600 -#endif - -// - -// Advanced configuration -// usart_advanced -#ifndef CONF_USART_7_ADVANCED_CONFIG -#define CONF_USART_7_ADVANCED_CONFIG 0 -#endif - -// Channel Mode -// <0=>Normal Mode -// <1=>Automatic Echo -// <2=>Local Loopback -// <3=>Remote Loopback -// Channel mode in USART frame -// usart_channel_mode -#ifndef CONF_USART_7_CHMODE -#define CONF_USART_7_CHMODE 0 -#endif - -// 9 bits character enable -// Enable 9 bits character, this has high priority than 5/6/7/8 bits. -// usart_9bits_enable -#ifndef CONF_USART_7_MODE9 -#define CONF_USART_7_MODE9 0 -#endif - -// Variable Sync -// <0=>User defined configuration -// <1=>sync field is updated when a character is written into US_THR -// Variable Synchronization of Command/Data Sync Start Frarm Delimiter -// variable_sync -#ifndef CONF_USART_7_VAR_SYNC -#define CONF_USART_7_VAR_SYNC 0 -#endif - -// Oversampling Mode -// <0=>16 Oversampling -// <1=>8 Oversampling -// Oversampling Mode in UART mode -// usart__oversampling_mode -#ifndef CONF_USART_7_OVER -#define CONF_USART_7_OVER 0 -#endif - -// Inhibit Non Ack -// <0=>The NACK is generated -// <1=>The NACK is not generated -// Inhibit Non Acknowledge -// usart__inack -#ifndef CONF_USART_7_INACK -#define CONF_USART_7_INACK 1 -#endif - -// Disable Successive NACK -// <0=>NACK is sent on the ISO line as soon as a parity error occurs -// <1=>Many parity errors generate a NACK on the ISO line -// Disable Successive NACK -// usart_dsnack -#ifndef CONF_USART_7_DSNACK -#define CONF_USART_7_DSNACK 0 -#endif - -// Inverted Data -// <0=>Data isn't inverted, nomal mode -// <1=>Data is inverted -// Inverted Data -// usart_invdata -#ifndef CONF_USART_7_INVDATA -#define CONF_USART_7_INVDATA 0 -#endif - -// Maximum Number of Automatic Iteration <0-7> -// Defines the maximum number of iterations in mode ISO7816, protocol T = 0. -// usart_max_iteration -#ifndef CONF_USART_7_MAX_ITERATION -#define CONF_USART_7_MAX_ITERATION 0 -#endif - -// Receive Line Filter enable -// whether the USART filters the receive line using a three-sample filter -// usart_receive_filter_enable -#ifndef CONF_USART_7_FILTER -#define CONF_USART_7_FILTER 0 -#endif - -// Manchester Encoder/Decoder Enable -// whether the USART Manchester Encoder/Decoder -// usart_manchester_filter_enable -#ifndef CONF_USART_7_MAN -#define CONF_USART_7_MAN 0 -#endif - -// Manchester Synchronization Mode -// <0=>The Manchester start bit is a 0 to 1 transition -// <1=>The Manchester start bit is a 1 to 0 transition -// Manchester Synchronization Mode -// usart_manchester_synchronization_mode -#ifndef CONF_USART_7_MODSYNC -#define CONF_USART_7_MODSYNC 0 -#endif - -// Start Frame Delimiter Selector -// <0=>Start frame delimiter is COMMAND or DATA SYNC -// <1=>Start frame delimiter is one bit -// Start Frame Delimiter Selector -// usart_start_frame_delimiter -#ifndef CONF_USART_7_ONEBIT -#define CONF_USART_7_ONEBIT 0 -#endif - -// Fractional Part <0-7> -// Fractional part of the baud rate if baud rate generator is in fractional mode -// usart_arch_fractional -#ifndef CONF_USART_7_FRACTIONAL -#define CONF_USART_7_FRACTIONAL 0x0 -#endif - -// Data Order -// <0=>LSB is transmitted first -// <1=>MSB is transmitted first -// Data order of the data bits in the frame -// usart_arch_msbf -#ifndef CONF_USART_7_MSBF -#define CONF_USART_7_MSBF 0 -#endif - -// - -#define CONF_USART_7_MODE 0x0 - -// Calculate BAUD register value in UART mode -#if CONF_FLEXCOM7_CK_SRC < 3 -#ifndef CONF_USART_7_BAUD_CD -#define CONF_USART_7_BAUD_CD ((CONF_FLEXCOM7_FREQUENCY) / CONF_USART_7_BAUD / 8 / (2 - CONF_USART_7_OVER)) -#endif -#ifndef CONF_USART_7_BAUD_FP -#define CONF_USART_7_BAUD_FP \ - ((CONF_FLEXCOM7_FREQUENCY) / CONF_USART_7_BAUD / (2 - CONF_USART_7_OVER) - 8 * CONF_USART_7_BAUD_CD) -#endif -#elif CONF_FLEXCOM7_CK_SRC == 3 -// No division is active. The value written in US_BRGR has no effect. -#ifndef CONF_USART_7_BAUD_CD -#define CONF_USART_7_BAUD_CD 1 -#endif -#ifndef CONF_USART_7_BAUD_FP -#define CONF_USART_7_BAUD_FP 1 -#endif -#endif - -// <<< end of configuration section >>> - -#endif // HPL_USART_CONFIG_H diff --git a/hw/bsp/samg55xplained/peripheral_clk_config.h b/hw/bsp/samg55xplained/peripheral_clk_config.h deleted file mode 100644 index 6d390f388..000000000 --- a/hw/bsp/samg55xplained/peripheral_clk_config.h +++ /dev/null @@ -1,85 +0,0 @@ -/* Auto-generated config file peripheral_clk_config.h */ -#ifndef PERIPHERAL_CLK_CONFIG_H -#define PERIPHERAL_CLK_CONFIG_H - -// <<< Use Configuration Wizard in Context Menu >>> - -/** - * \def CONF_HCLK_FREQUENCY - * \brief HCLK's Clock frequency - */ -#ifndef CONF_HCLK_FREQUENCY -#define CONF_HCLK_FREQUENCY 8000000 -#endif - -/** - * \def CONF_FCLK_FREQUENCY - * \brief FCLK's Clock frequency - */ -#ifndef CONF_FCLK_FREQUENCY -#define CONF_FCLK_FREQUENCY 8000000 -#endif - -/** - * \def CONF_CPU_FREQUENCY - * \brief CPU's Clock frequency - */ -#ifndef CONF_CPU_FREQUENCY -#define CONF_CPU_FREQUENCY 8000000 -#endif - -/** - * \def CONF_SLCK_FREQUENCY - * \brief Slow Clock frequency - */ -#define CONF_SLCK_FREQUENCY 32768 - -/** - * \def CONF_MCK_FREQUENCY - * \brief Master Clock frequency - */ -#define CONF_MCK_FREQUENCY 8000000 - -// USB Clock Source -// <0=> USB Clock Controller (USB_48M) -// usb_clock_source -// Select the clock source for USB. -#ifndef CONF_UDP_SRC -#define CONF_UDP_SRC 0 -#endif - -/** - * \def CONF_UDP_FREQUENCY - * \brief UDP's Clock frequency - */ -#ifndef CONF_UDP_FREQUENCY -#define CONF_UDP_FREQUENCY 48005120 -#endif - -// FLEXCOM Clock Settings -// FLEXCOM Clock source -// <0=> Master Clock (MCK) -// <1=> MCK / 8 -// <2=> Programmable Clock Controller 6 (PMC_PCK6) -// <2=> Programmable Clock Controller 7 (PMC_PCK7) -// <3=> External Clock -// This defines the clock source for the FLEXCOM, PCK6 is used for FLEXCOM0/1/2/3 and PCK7 is used for FLEXCOM4/5/6/7 -// flexcom_clock_source -#ifndef CONF_FLEXCOM7_CK_SRC -#define CONF_FLEXCOM7_CK_SRC 0 -#endif - -// FLEXCOM External Clock Input on SCK <1-4294967295> -// Inputs the external clock frequency on SCK -// flexcom_clock_freq -#ifndef CONF_FLEXCOM7_SCK_FREQ -#define CONF_FLEXCOM7_SCK_FREQ 10000000 -#endif - -#ifndef CONF_FLEXCOM7_FREQUENCY -#define CONF_FLEXCOM7_FREQUENCY 8000000 -#endif - -// <<< end of configuration section >>> - -#endif // PERIPHERAL_CLK_CONFIG_H diff --git a/hw/bsp/samg55xplained/samg55j19_flash.ld b/hw/bsp/samg55xplained/samg55j19_flash.ld deleted file mode 100644 index a222b919b..000000000 --- a/hw/bsp/samg55xplained/samg55j19_flash.ld +++ /dev/null @@ -1,158 +0,0 @@ -/** - * \file - * - * \brief GCC linker script (flash) for ATSAMG55J19 - * - * Copyright (c) 2017 Atmel Corporation, a wholly owned subsidiary of Microchip Technology Inc. - * - * \license_start - * - * \page License - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - * \license_stop - * - */ - -/*------------------------------------------------------------------------------ - * Linker script for running in internal FLASH on the ATSAMG55J19 - *----------------------------------------------------------------------------*/ - -OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -OUTPUT_ARCH(arm) - -/* Memory Spaces Definitions */ -MEMORY -{ - rom (rx) : ORIGIN = 0x00400000, LENGTH = 0x00080000 /* rom, 524288K */ - ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00028000 /* ram, 163840K */ -} - -/* The stack size used by the application. NOTE: you need to adjust according to your application. */ -STACK_SIZE = DEFINED(__stack_size__) ? __stack_size__ : 0x0400; - -/* The heapsize used by the application. NOTE: you need to adjust according to your application. */ -HEAP_SIZE = DEFINED(HEAP_SIZE) ? HEAP_SIZE : DEFINED(__heap_size__) ? __heap_size__ : 0x0200; - -/* Section Definitions */ -SECTIONS -{ - .text : - { - . = ALIGN(4); - _sfixed = .; - KEEP(*(.vectors .vectors.*)) - *(.text .text.* .gnu.linkonce.t.*) - *(.glue_7t) *(.glue_7) - *(.rodata .rodata* .gnu.linkonce.r.*) - *(.ARM.extab* .gnu.linkonce.armextab.*) - - /* Support C constructors, and C destructors in both user code - and the C library. This also provides support for C++ code. */ - . = ALIGN(4); - KEEP(*(.init)) - . = ALIGN(4); - __preinit_array_start = .; - KEEP (*(.preinit_array)) - __preinit_array_end = .; - - . = ALIGN(4); - __init_array_start = .; - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array)) - __init_array_end = .; - - . = ALIGN(0x4); - KEEP (*crtbegin.o(.ctors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) - KEEP (*(SORT(.ctors.*))) - KEEP (*crtend.o(.ctors)) - - . = ALIGN(4); - KEEP(*(.fini)) - - . = ALIGN(4); - __fini_array_start = .; - KEEP (*(.fini_array)) - KEEP (*(SORT(.fini_array.*))) - __fini_array_end = .; - - KEEP (*crtbegin.o(.dtors)) - KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) - KEEP (*(SORT(.dtors.*))) - KEEP (*crtend.o(.dtors)) - - . = ALIGN(4); - _efixed = .; /* End of text section */ - } > rom - - /* .ARM.exidx is sorted, so has to go in its own output section. */ - PROVIDE_HIDDEN (__exidx_start = .); - .ARM.exidx : - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > rom - PROVIDE_HIDDEN (__exidx_end = .); - - . = ALIGN(4); - _etext = .; - - .relocate : AT (_etext) - { - . = ALIGN(4); - _srelocate = .; - *(.ramfunc .ramfunc.*); - *(.data .data.*); - . = ALIGN(4); - _erelocate = .; - } > ram - - /* .bss section which is used for uninitialized data */ - .bss (NOLOAD) : - { - . = ALIGN(4); - _sbss = . ; - _szero = .; - *(.bss .bss.*) - *(COMMON) - . = ALIGN(4); - _ebss = . ; - _ezero = .; - end = .; - } > ram - - /* heap section */ - .heap (NOLOAD): - { - . = ALIGN(8); - _sheap = .; - . = . + HEAP_SIZE; - . = ALIGN(8); - _eheap = .; - } > ram - - /* stack section */ - .stack (NOLOAD): - { - . = ALIGN(8); - _sstack = .; - . = . + STACK_SIZE; - . = ALIGN(8); - _estack = .; - } > ram - - . = ALIGN(4); - _end = . ; - _ram_end_ = ORIGIN(ram) + LENGTH(ram) - 1 ; -} diff --git a/hw/bsp/samg55xplained/samg55xplained.c b/hw/bsp/samg55xplained/samg55xplained.c deleted file mode 100644 index 2ac0c0a29..000000000 --- a/hw/bsp/samg55xplained/samg55xplained.c +++ /dev/null @@ -1,157 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019, hathach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - */ - -#include "sam.h" -#include "bsp/board_api.h" - -#include "peripheral_clk_config.h" -#include "hal/include/hal_init.h" -#include "hal/include/hpl_usart_sync.h" -#include "hpl/pmc/hpl_pmc.h" -#include "hal/include/hal_gpio.h" - - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM DECLARATION -//--------------------------------------------------------------------+ - -#define LED_PIN GPIO(GPIO_PORTA, 6) - -#define BUTTON_PIN GPIO(GPIO_PORTA, 2) -#define BUTTON_STATE_ACTIVE 0 - -#define UART_TX_PIN GPIO(GPIO_PORTA, 28) -#define UART_RX_PIN GPIO(GPIO_PORTA, 27) - -struct _usart_sync_device edbg_com; - -//------------- IMPLEMENTATION -------------// -void board_init(void) -{ - init_mcu(); - - _pmc_enable_periph_clock(ID_PIOA); - - /* Disable Watchdog */ - hri_wdt_set_MR_WDDIS_bit(WDT); - - // LED - gpio_set_pin_level(LED_PIN, false); - gpio_set_pin_direction(LED_PIN, GPIO_DIRECTION_OUT); - gpio_set_pin_function(LED_PIN, GPIO_PIN_FUNCTION_OFF); - - // Button - gpio_set_pin_direction(BUTTON_PIN, GPIO_DIRECTION_IN); - gpio_set_pin_pull_mode(BUTTON_PIN, GPIO_PULL_UP); - gpio_set_pin_function(BUTTON_PIN, GPIO_PIN_FUNCTION_OFF); - - // Uart via EDBG Com - _pmc_enable_periph_clock(ID_FLEXCOM7); - gpio_set_pin_function(UART_RX_PIN, MUX_PA27B_FLEXCOM7_RXD); - gpio_set_pin_function(UART_TX_PIN, MUX_PA28B_FLEXCOM7_TXD); - - _usart_sync_init(&edbg_com, FLEXCOM7); - _usart_sync_set_baud_rate(&edbg_com, CFG_BOARD_UART_BAUDRATE); - _usart_sync_set_mode(&edbg_com, USART_MODE_ASYNCHRONOUS); - _usart_sync_enable(&edbg_com); - -#if CFG_TUSB_OS == OPT_OS_NONE - // 1ms tick timer (samd SystemCoreClock may not correct) - SysTick_Config(CONF_CPU_FREQUENCY / 1000); -#endif - - // USB Pin, Clock init - - /* Clear SYSIO 10 & 11 for USB DM & DP */ - hri_matrix_clear_CCFG_SYSIO_reg(MATRIX, CCFG_SYSIO_SYSIO10 | CCFG_SYSIO_SYSIO11); - - // Enable clock - _pmc_enable_periph_clock(ID_UDP); - - /* USB Device mode & Transceiver active */ - hri_matrix_write_CCFG_USBMR_reg(MATRIX, CCFG_USBMR_USBMODE); -} - -//--------------------------------------------------------------------+ -// USB Interrupt Handler -//--------------------------------------------------------------------+ -void UDP_Handler(void) -{ - #if CFG_TUD_ENABLED - tud_int_handler(0); - #endif -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - gpio_set_pin_level(LED_PIN, state); -} - -uint32_t board_button_read(void) -{ - return BUTTON_STATE_ACTIVE == gpio_get_pin_level(BUTTON_PIN); -} - -int board_uart_read(uint8_t* buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -int board_uart_write(void const * buf, int len) -{ - uint8_t const * buf8 = (uint8_t const *) buf; - for(int i=0; i Date: Mon, 6 May 2024 17:14:35 +0700 Subject: add cmake for mm32, remove mm32 bluepill since it is custom/reworked board (not available for order) --- .github/workflows/build_cmake.yml | 1 + hw/bsp/mm32/FreeRTOSConfig/FreeRTOSConfig.h | 150 +++++++++++++++++ hw/bsp/mm32/boards/mm32f327x_bluepillplus/board.mk | 11 -- hw/bsp/mm32/boards/mm32f327x_bluepillplus/flash.ld | 163 ------------------ .../mm32f327x_bluepillplus.c | 182 --------------------- hw/bsp/mm32/boards/mm32f327x_mb39/board.cmake | 10 ++ hw/bsp/mm32/boards/mm32f327x_mb39/board.h | 19 +++ hw/bsp/mm32/boards/mm32f327x_mb39/board.mk | 2 +- hw/bsp/mm32/boards/mm32f327x_mb39/mm32f327x_mb39.c | 171 ------------------- .../mm32/boards/mm32f327x_pitaya_lite/board.cmake | 10 ++ hw/bsp/mm32/boards/mm32f327x_pitaya_lite/board.h | 14 ++ hw/bsp/mm32/boards/mm32f327x_pitaya_lite/board.mk | 5 +- .../mm32f327x_pitaya_lite/mm32f327x_pitaya_lite.c | 182 --------------------- hw/bsp/mm32/family.c | 169 +++++++++++++++++++ hw/bsp/mm32/family.cmake | 101 ++++++++++++ hw/bsp/mm32/family.mk | 28 ++-- tools/get_deps.py | 2 +- 17 files changed, 495 insertions(+), 725 deletions(-) create mode 100644 hw/bsp/mm32/FreeRTOSConfig/FreeRTOSConfig.h delete mode 100644 hw/bsp/mm32/boards/mm32f327x_bluepillplus/board.mk delete mode 100644 hw/bsp/mm32/boards/mm32f327x_bluepillplus/flash.ld delete mode 100644 hw/bsp/mm32/boards/mm32f327x_bluepillplus/mm32f327x_bluepillplus.c create mode 100644 hw/bsp/mm32/boards/mm32f327x_mb39/board.cmake create mode 100644 hw/bsp/mm32/boards/mm32f327x_mb39/board.h delete mode 100644 hw/bsp/mm32/boards/mm32f327x_mb39/mm32f327x_mb39.c create mode 100644 hw/bsp/mm32/boards/mm32f327x_pitaya_lite/board.cmake create mode 100644 hw/bsp/mm32/boards/mm32f327x_pitaya_lite/board.h delete mode 100644 hw/bsp/mm32/boards/mm32f327x_pitaya_lite/mm32f327x_pitaya_lite.c create mode 100644 hw/bsp/mm32/family.c create mode 100644 hw/bsp/mm32/family.cmake (limited to '.github/workflows') diff --git a/.github/workflows/build_cmake.yml b/.github/workflows/build_cmake.yml index 050afe48f..c1f85ad9c 100644 --- a/.github/workflows/build_cmake.yml +++ b/.github/workflows/build_cmake.yml @@ -45,6 +45,7 @@ jobs: - 'lpc51 lpc54 lpc55' - 'mcx' - 'msp432e4' + - 'mm32' - 'nrf' - 'ra' - 'rp2040' diff --git a/hw/bsp/mm32/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/mm32/FreeRTOSConfig/FreeRTOSConfig.h new file mode 100644 index 000000000..6622cf801 --- /dev/null +++ b/hw/bsp/mm32/FreeRTOSConfig/FreeRTOSConfig.h @@ -0,0 +1,150 @@ +/* + * FreeRTOS Kernel V10.0.0 + * Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. If you wish to use our Amazon + * FreeRTOS name, please do so in a fair use way that does not cause confusion. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://www.FreeRTOS.org + * http://aws.amazon.com/freertos + * + * 1 tab == 4 spaces! + */ + + +#ifndef FREERTOS_CONFIG_H +#define FREERTOS_CONFIG_H + +/*----------------------------------------------------------- + * Application specific definitions. + * + * These definitions should be adjusted for your particular hardware and + * application requirements. + * + * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE + * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE. + * + * See http://www.freertos.org/a00110.html. + *----------------------------------------------------------*/ + +// skip if included from IAR assembler +#ifndef __IASMARM__ + #include "mm32_device.h" + extern u32 SystemCoreClock; +#endif + +/* Cortex M23/M33 port configuration. */ +#define configENABLE_MPU 0 +#define configENABLE_FPU 0 +#define configENABLE_TRUSTZONE 0 +#define configMINIMAL_SECURE_STACK_SIZE (1024) + +#define configUSE_PREEMPTION 1 +#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0 +#define configCPU_CLOCK_HZ SystemCoreClock +#define configTICK_RATE_HZ ( 1000 ) +#define configMAX_PRIORITIES ( 5 ) +#define configMINIMAL_STACK_SIZE ( 128 ) +#define configTOTAL_HEAP_SIZE ( configSUPPORT_DYNAMIC_ALLOCATION*4*1024 ) +#define configMAX_TASK_NAME_LEN 16 +#define configUSE_16_BIT_TICKS 0 +#define configIDLE_SHOULD_YIELD 1 +#define configUSE_MUTEXES 1 +#define configUSE_RECURSIVE_MUTEXES 1 +#define configUSE_COUNTING_SEMAPHORES 1 +#define configQUEUE_REGISTRY_SIZE 4 +#define configUSE_QUEUE_SETS 0 +#define configUSE_TIME_SLICING 0 +#define configUSE_NEWLIB_REENTRANT 0 +#define configENABLE_BACKWARD_COMPATIBILITY 1 +#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 + +#define configSUPPORT_STATIC_ALLOCATION 1 +#define configSUPPORT_DYNAMIC_ALLOCATION 0 + +/* Hook function related definitions. */ +#define configUSE_IDLE_HOOK 0 +#define configUSE_TICK_HOOK 0 +#define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning +#define configCHECK_FOR_STACK_OVERFLOW 2 +#define configCHECK_HANDLER_INSTALLATION 0 + +/* Run time and task stats gathering related definitions. */ +#define configGENERATE_RUN_TIME_STATS 0 +#define configRECORD_STACK_HIGH_ADDRESS 1 +#define configUSE_TRACE_FACILITY 1 // legacy trace +#define configUSE_STATS_FORMATTING_FUNCTIONS 0 + +/* Co-routine definitions. */ +#define configUSE_CO_ROUTINES 0 +#define configMAX_CO_ROUTINE_PRIORITIES 2 + +/* Software timer related definitions. */ +#define configUSE_TIMERS 1 +#define configTIMER_TASK_PRIORITY (configMAX_PRIORITIES-2) +#define configTIMER_QUEUE_LENGTH 32 +#define configTIMER_TASK_STACK_DEPTH configMINIMAL_STACK_SIZE + +/* Optional functions - most linkers will remove unused functions anyway. */ +#define INCLUDE_vTaskPrioritySet 0 +#define INCLUDE_uxTaskPriorityGet 0 +#define INCLUDE_vTaskDelete 0 +#define INCLUDE_vTaskSuspend 1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY +#define INCLUDE_xResumeFromISR 0 +#define INCLUDE_vTaskDelayUntil 1 +#define INCLUDE_vTaskDelay 1 +#define INCLUDE_xTaskGetSchedulerState 0 +#define INCLUDE_xTaskGetCurrentTaskHandle 1 +#define INCLUDE_uxTaskGetStackHighWaterMark 0 +#define INCLUDE_xTaskGetIdleTaskHandle 0 +#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0 +#define INCLUDE_pcTaskGetTaskName 0 +#define INCLUDE_eTaskGetState 0 +#define INCLUDE_xEventGroupSetBitFromISR 0 +#define INCLUDE_xTimerPendFunctionCall 0 + +/* FreeRTOS hooks to NVIC vectors */ +#define xPortPendSVHandler PendSV_Handler +#define xPortSysTickHandler SysTick_Handler +#define vPortSVCHandler SVC_Handler + +//--------------------------------------------------------------------+ +// Interrupt nesting behavior configuration. +//--------------------------------------------------------------------+ + +// For Cortex-M specific: __NVIC_PRIO_BITS is defined in mcu header +#define configPRIO_BITS 4 + +/* The lowest interrupt priority that can be used in a call to a "set priority" function. */ +#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY ((1<FLASH - - /* The program code and other data goes into FLASH */ - .text : - { - . = ALIGN(4); - *(.text) /* .text sections (code) */ - *(.text*) /* .text* sections (code) */ - *(.glue_7) /* glue arm to thumb code */ - *(.glue_7t) /* glue thumb to arm code */ - *(.eh_frame) - - KEEP (*(.init)) - KEEP (*(.fini)) - - . = ALIGN(4); - _etext = .; /* define a global symbols at end of code */ - } >FLASH - - /* Constant data goes into FLASH */ - .rodata : - { - . = ALIGN(4); - *(.rodata) /* .rodata sections (constants, strings, etc.) */ - *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ - . = ALIGN(4); - } >FLASH - - .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH - .ARM : { - __exidx_start = .; - *(.ARM.exidx*) - __exidx_end = .; - } >FLASH - - .preinit_array : - { - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP (*(.preinit_array*)) - PROVIDE_HIDDEN (__preinit_array_end = .); - } >FLASH - .init_array : - { - PROVIDE_HIDDEN (__init_array_start = .); - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array*)) - PROVIDE_HIDDEN (__init_array_end = .); - } >FLASH - .fini_array : - { - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP (*(SORT(.fini_array.*))) - KEEP (*(.fini_array*)) - PROVIDE_HIDDEN (__fini_array_end = .); - } >FLASH - - /* used by the startup to initialize data */ - _sidata = LOADADDR(.data); - - /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : - { - . = ALIGN(4); - _sdata = .; /* create a global symbol at data start */ - *(.data) /* .data sections */ - *(.data*) /* .data* sections */ - - . = ALIGN(4); - _edata = .; /* define a global symbol at data end */ - } >RAM AT> FLASH - - - /* Uninitialized data section */ - . = ALIGN(4); - .bss : - { - /* This is used by the startup in order to initialize the .bss section */ - _sbss = .; /* define a global symbol at bss start */ - __bss_start__ = _sbss; - *(.bss) - *(.bss*) - *(COMMON) - - . = ALIGN(4); - _ebss = .; /* define a global symbol at bss end */ - __bss_end__ = _ebss; - } >RAM - - /* User_heap_stack section, used to check that there is enough RAM left */ - ._user_heap_stack : - { - . = ALIGN(8); - PROVIDE ( end = . ); - PROVIDE ( _end = . ); - . = . + _Min_Heap_Size; - . = . + _Min_Stack_Size; - . = ALIGN(8); - } >RAM - - - - /* Remove information from the standard libraries */ - /DISCARD/ : - { - libc.a ( * ) - libm.a ( * ) - libgcc.a ( * ) - } - - .ARM.attributes 0 : { *(.ARM.attributes) } -} diff --git a/hw/bsp/mm32/boards/mm32f327x_bluepillplus/mm32f327x_bluepillplus.c b/hw/bsp/mm32/boards/mm32f327x_bluepillplus/mm32f327x_bluepillplus.c deleted file mode 100644 index a4bd95fab..000000000 --- a/hw/bsp/mm32/boards/mm32f327x_bluepillplus/mm32f327x_bluepillplus.c +++ /dev/null @@ -1,182 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2020 MM32 SE TEAM - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -/* WeAct BluePillPlus with MM32F3273G6P */ - -#include "mm32_device.h" -#include "hal_conf.h" -#include "tusb.h" -#include "bsp/board_api.h" - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ -void OTG_FS_IRQHandler (void) -{ - tud_int_handler(0); - -} -void USB_DeviceClockInit (void) -{ - /* Select USBCLK source */ - // RCC_USBCLKConfig(RCC_USBCLKSource_PLLCLK_Div1); - RCC->CFGR &= ~(0x3 << 22); - RCC->CFGR |= (0x1 << 22); - - /* Enable USB clock */ - RCC->AHB2ENR |= 0x1 << 7; -} -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM DECLARATION -//--------------------------------------------------------------------+ -// LED - -extern u32 SystemCoreClock; -const int baudrate = 115200; - -void board_init (void) -{ -// usb clock - USB_DeviceClockInit(); - - if ( SysTick_Config(SystemCoreClock / 1000) ) - { - while ( 1 ) - ; - } - NVIC_SetPriority(SysTick_IRQn, 0x0); - - // LED on PB2 - GPIO_InitTypeDef GPIO_InitStruct; - RCC_AHBPeriphClockCmd(RCC_AHBENR_GPIOB, ENABLE); - GPIO_StructInit(&GPIO_InitStruct); - - GPIO_InitStruct.GPIO_Pin = GPIO_Pin_2; - GPIO_InitStruct.GPIO_Speed = GPIO_Speed_50MHz; - GPIO_InitStruct.GPIO_Mode = GPIO_Mode_Out_PP; - GPIO_Init(GPIOB, &GPIO_InitStruct); - - board_led_write(true); - - // KEY on PA0 - RCC_AHBPeriphClockCmd(RCC_AHBENR_GPIOA, ENABLE); - GPIO_StructInit(&GPIO_InitStruct); - GPIO_InitStruct.GPIO_Pin = GPIO_Pin_0; - GPIO_InitStruct.GPIO_Speed = GPIO_Speed_10MHz; - GPIO_InitStruct.GPIO_Mode = GPIO_Mode_IPD; - GPIO_Init(GPIOA, &GPIO_InitStruct); - - // UART - UART_InitTypeDef UART_InitStruct; - - RCC_APB2PeriphClockCmd(RCC_APB2ENR_UART1, ENABLE); //enableUART1,GPIOAclock - RCC_AHBPeriphClockCmd(RCC_AHBENR_GPIOA, ENABLE); // - //UART initialset - - GPIO_PinAFConfig(GPIOA, GPIO_PinSource9, GPIO_AF_7); - GPIO_PinAFConfig(GPIOA, GPIO_PinSource10, GPIO_AF_7); - - UART_StructInit(&UART_InitStruct); - UART_InitStruct.UART_BaudRate = baudrate; - UART_InitStruct.UART_WordLength = UART_WordLength_8b; - UART_InitStruct.UART_StopBits = UART_StopBits_1; //one stopbit - UART_InitStruct.UART_Parity = UART_Parity_No; //none odd-even verify bit - UART_InitStruct.UART_HardwareFlowControl = UART_HardwareFlowControl_None; //No hardware flow control - UART_InitStruct.UART_Mode = UART_Mode_Rx | UART_Mode_Tx; // receive and sent mode - - UART_Init(UART1, &UART_InitStruct); //initial uart 1 - UART_Cmd(UART1, ENABLE); //enable uart 1 - - //UART1_TX GPIOA.9 - GPIO_StructInit(&GPIO_InitStruct); - GPIO_InitStruct.GPIO_Pin = GPIO_Pin_9; - GPIO_InitStruct.GPIO_Speed = GPIO_Speed_50MHz; - GPIO_InitStruct.GPIO_Mode = GPIO_Mode_AF_PP; - GPIO_Init(GPIOA, &GPIO_InitStruct); - - //UART1_RX GPIOA.10 - GPIO_InitStruct.GPIO_Pin = GPIO_Pin_5; - GPIO_InitStruct.GPIO_Mode = GPIO_Mode_IPU; - GPIO_Init(GPIOA, &GPIO_InitStruct); - -} - - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write (bool state) -{ - state ? (GPIO_ResetBits(GPIOB, GPIO_Pin_2)) : (GPIO_SetBits(GPIOB, GPIO_Pin_2)); -} - -uint32_t board_button_read (void) -{ - uint32_t key = GPIO_ReadInputDataBit(GPIOA, GPIO_Pin_0) == Bit_SET; - return key; -} - -int board_uart_read (uint8_t *buf, int len) -{ - (void) buf; - (void) len; - return 0; -} - -int board_uart_write (void const *buf, int len) -{ - const char *buff = buf; - while ( len ) - { - while ( (UART1->CSR & UART_IT_TXIEN) == 0 ) - ; //The loop is sent until it is finished - UART1->TDR = (*buff & 0xFF); - buff++; - len--; - } - return len; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void SysTick_Handler (void) -{ - system_ticks++; -} - -uint32_t board_millis (void) -{ - return system_ticks; -} -#endif - -// Required by __libc_init_array in startup code if we are compiling using -// -nostdlib/-nostartfiles. -void _init(void) -{ - -} diff --git a/hw/bsp/mm32/boards/mm32f327x_mb39/board.cmake b/hw/bsp/mm32/boards/mm32f327x_mb39/board.cmake new file mode 100644 index 000000000..4f3d145cf --- /dev/null +++ b/hw/bsp/mm32/boards/mm32f327x_mb39/board.cmake @@ -0,0 +1,10 @@ +set(MCU_VARIANT mm32f327x) +set(JLINK_DEVICE MM32F3273G9P) + +set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/flash.ld) + +function(update_board TARGET) + target_compile_definitions(${TARGET} PUBLIC + HSE_VALUE=8000000 + ) +endfunction() diff --git a/hw/bsp/mm32/boards/mm32f327x_mb39/board.h b/hw/bsp/mm32/boards/mm32f327x_mb39/board.h new file mode 100644 index 000000000..3ac048cf1 --- /dev/null +++ b/hw/bsp/mm32/boards/mm32f327x_mb39/board.h @@ -0,0 +1,19 @@ +#ifndef BOARD_H +#define BOARD_H + +// GPIO_PinAFConfig(GPIOA, GPIO_PinSource15, GPIO_AF_15); //Disable JTDI AF to AF15 +#define LED_PORT GPIOA +#define LED_PIN GPIO_Pin_15 +#define LED_STATE_ON 1 + +//#define BUTTON_PORT GPIOC +//#define BUTTON_PIN GPIO_PIN_13 +//#define BUTTON_STATE_ACTIVE 1 + +#define UART_DEV UART1 +#define UART_GPIO_PORT GPIOA +#define UART_GPIO_AF GPIO_AF_7 +#define UART_TX_PIN 9 +#define UART_RX_PIN 10 + +#endif diff --git a/hw/bsp/mm32/boards/mm32f327x_mb39/board.mk b/hw/bsp/mm32/boards/mm32f327x_mb39/board.mk index 803b3adff..f6d18315d 100644 --- a/hw/bsp/mm32/boards/mm32f327x_mb39/board.mk +++ b/hw/bsp/mm32/boards/mm32f327x_mb39/board.mk @@ -1,9 +1,9 @@ +MCU_VARIANT = mm32f327x CFLAGS += \ -DHSE_VALUE=8000000 JLINK_DEVICE = MM32F3273G9P LD_FILE = $(BOARD_PATH)/flash.ld -SRC_S += $(SDK_DIR)/mm32f327x/MM32F327x/Source/GCC_StartAsm/startup_mm32m3ux_u_gcc.S flash: flash-jlink diff --git a/hw/bsp/mm32/boards/mm32f327x_mb39/mm32f327x_mb39.c b/hw/bsp/mm32/boards/mm32f327x_mb39/mm32f327x_mb39.c deleted file mode 100644 index 086532179..000000000 --- a/hw/bsp/mm32/boards/mm32f327x_mb39/mm32f327x_mb39.c +++ /dev/null @@ -1,171 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2020 MM32 SE TEAM - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "mm32_device.h" -#include "hal_conf.h" -#include "tusb.h" -#include "bsp/board_api.h" - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ -void OTG_FS_IRQHandler (void) -{ - tud_int_handler(0); - -} -void USB_DeviceClockInit (void) -{ - /* Select USBCLK source */ - // RCC_USBCLKConfig(RCC_USBCLKSource_PLLCLK_Div1); - RCC->CFGR &= ~(0x3 << 22); - RCC->CFGR |= (0x1 << 22); - - /* Enable USB clock */ - RCC->AHB2ENR |= 0x1 << 7; -} -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM DECLARATION -//--------------------------------------------------------------------+ -// LED - -extern u32 SystemCoreClock; -const int baudrate = 115200; - -void board_init (void) -{ -// usb clock - USB_DeviceClockInit(); - - if ( SysTick_Config(SystemCoreClock / 1000) ) - { - while ( 1 ) - ; - } - NVIC_SetPriority(SysTick_IRQn, 0x0); - - // LED - GPIO_InitTypeDef GPIO_InitStruct; - RCC_AHBPeriphClockCmd(RCC_AHBENR_GPIOA, ENABLE); - GPIO_StructInit(&GPIO_InitStruct); - GPIO_PinAFConfig(GPIOA, GPIO_PinSource15, GPIO_AF_15); //Disable JTDI AF to AF15 - - GPIO_InitStruct.GPIO_Pin = GPIO_Pin_15; - GPIO_InitStruct.GPIO_Speed = GPIO_Speed_50MHz; - GPIO_InitStruct.GPIO_Mode = GPIO_Mode_Out_PP; - GPIO_Init(GPIOA, &GPIO_InitStruct); - - board_led_write(true); - - // UART - UART_InitTypeDef UART_InitStruct; - - RCC_APB2PeriphClockCmd(RCC_APB2ENR_UART1, ENABLE); //enableUART1,GPIOAclock - RCC_AHBPeriphClockCmd(RCC_AHBENR_GPIOA, ENABLE); // - //UART initialset - - GPIO_PinAFConfig(GPIOA, GPIO_PinSource9, GPIO_AF_7); - GPIO_PinAFConfig(GPIOA, GPIO_PinSource10, GPIO_AF_7); - - UART_StructInit(&UART_InitStruct); - UART_InitStruct.UART_BaudRate = baudrate; - UART_InitStruct.UART_WordLength = UART_WordLength_8b; - UART_InitStruct.UART_StopBits = UART_StopBits_1; //one stopbit - UART_InitStruct.UART_Parity = UART_Parity_No; //none odd-even verify bit - UART_InitStruct.UART_HardwareFlowControl = UART_HardwareFlowControl_None; //No hardware flow control - UART_InitStruct.UART_Mode = UART_Mode_Rx | UART_Mode_Tx; // receive and sent mode - - UART_Init(UART1, &UART_InitStruct); //initial uart 1 - UART_Cmd(UART1, ENABLE); //enable uart 1 - - //UART1_TX GPIOA.9 - GPIO_StructInit(&GPIO_InitStruct); - GPIO_InitStruct.GPIO_Pin = GPIO_Pin_9; - GPIO_InitStruct.GPIO_Speed = GPIO_Speed_50MHz; - GPIO_InitStruct.GPIO_Mode = GPIO_Mode_AF_PP; - GPIO_Init(GPIOA, &GPIO_InitStruct); - - //UART1_RX GPIOA.10 - GPIO_InitStruct.GPIO_Pin = GPIO_Pin_5; - GPIO_InitStruct.GPIO_Mode = GPIO_Mode_IPU; - GPIO_Init(GPIOA, &GPIO_InitStruct); - -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write (bool state) -{ - state ? (GPIO_ResetBits(GPIOA, GPIO_Pin_15)) : (GPIO_SetBits(GPIOA, GPIO_Pin_15)); -} - -uint32_t board_button_read (void) -{ - return 0; -} - -int board_uart_read (uint8_t *buf, int len) -{ - (void) buf; - (void) len; - return 0; -} - -int board_uart_write (void const *buf, int len) -{ - const char *buff = buf; - while ( len ) - { - while ( (UART1->CSR & UART_IT_TXIEN) == 0 ) - ; //The loop is sent until it is finished - UART1->TDR = (*buff & 0xFF); - buff++; - len--; - } - return len; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void SysTick_Handler (void) -{ - system_ticks++; -} - -uint32_t board_millis (void) -{ - return system_ticks; -} -#endif - -// Required by __libc_init_array in startup code if we are compiling using -// -nostdlib/-nostartfiles. -void _init(void) -{ - -} diff --git a/hw/bsp/mm32/boards/mm32f327x_pitaya_lite/board.cmake b/hw/bsp/mm32/boards/mm32f327x_pitaya_lite/board.cmake new file mode 100644 index 000000000..4de25e2c4 --- /dev/null +++ b/hw/bsp/mm32/boards/mm32f327x_pitaya_lite/board.cmake @@ -0,0 +1,10 @@ +set(MCU_VARIANT mm32f327x) +set(JLINK_DEVICE MM32F3273G8P) + +set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/flash.ld) + +function(update_board TARGET) + target_compile_definitions(${TARGET} PUBLIC + HSE_VALUE=12000000 + ) +endfunction() diff --git a/hw/bsp/mm32/boards/mm32f327x_pitaya_lite/board.h b/hw/bsp/mm32/boards/mm32f327x_pitaya_lite/board.h new file mode 100644 index 000000000..9ace1d357 --- /dev/null +++ b/hw/bsp/mm32/boards/mm32f327x_pitaya_lite/board.h @@ -0,0 +1,14 @@ +#ifndef BOARD_H +#define BOARD_H + +// GPIO_PinAFConfig(GPIOA, GPIO_PinSource15, GPIO_AF_15); //Disable JTDI AF to AF15 +#define LED_PORT GPIOA +#define LED_PIN GPIO_Pin_1 +#define LED_STATE_ON 1 + +#define BUTTON_PORT GPIOA +#define BUTTON_PIN GPIO_PIN_0 +#define BUTTON_STATE_ACTIVE 0 + + +#endif diff --git a/hw/bsp/mm32/boards/mm32f327x_pitaya_lite/board.mk b/hw/bsp/mm32/boards/mm32f327x_pitaya_lite/board.mk index a778e749f..dbcd314c8 100644 --- a/hw/bsp/mm32/boards/mm32f327x_pitaya_lite/board.mk +++ b/hw/bsp/mm32/boards/mm32f327x_pitaya_lite/board.mk @@ -1,11 +1,12 @@ +MCU_VARIANT = mm32f327x + CFLAGS += \ -DHSE_VALUE=12000000 LD_FILE = $(BOARD_PATH)/flash.ld -SRC_S += $(SDK_DIR)/mm32f327x/MM32F327x/Source/GCC_StartAsm/startup_mm32m3ux_u_gcc.S # For flash-jlink target -#JLINK_DEVICE = MM32F3273G8P +JLINK_DEVICE = MM32F3273G8P # flash target using on-board stlink #flash: flash-jlink diff --git a/hw/bsp/mm32/boards/mm32f327x_pitaya_lite/mm32f327x_pitaya_lite.c b/hw/bsp/mm32/boards/mm32f327x_pitaya_lite/mm32f327x_pitaya_lite.c deleted file mode 100644 index bd2d36ae0..000000000 --- a/hw/bsp/mm32/boards/mm32f327x_pitaya_lite/mm32f327x_pitaya_lite.c +++ /dev/null @@ -1,182 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2020 MM32 SE TEAM - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -/* DshanMCU Pitaya Lite with MM32F3273 */ - -#include "mm32_device.h" -#include "hal_conf.h" -#include "tusb.h" -#include "bsp/board_api.h" - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ -void OTG_FS_IRQHandler (void) -{ - tud_int_handler(0); - -} -void USB_DeviceClockInit (void) -{ - /* Select USBCLK source */ - // RCC_USBCLKConfig(RCC_USBCLKSource_PLLCLK_Div1); - RCC->CFGR &= ~(0x3 << 22); - RCC->CFGR |= (0x1 << 22); - - /* Enable USB clock */ - RCC->AHB2ENR |= 0x1 << 7; -} -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM DECLARATION -//--------------------------------------------------------------------+ -// LED - -extern u32 SystemCoreClock; -const int baudrate = 115200; - -void board_init (void) -{ -// usb clock -// requires SYSCLK_FREQ_XXMHz (HSE_VALUE*8) in system_mm32f327x.c - USB_DeviceClockInit(); - - if ( SysTick_Config(SystemCoreClock / 1000) ) - { - while ( 1 ) - ; - } - NVIC_SetPriority(SysTick_IRQn, 0x0); - - // LED on PA1 - GPIO_InitTypeDef GPIO_InitStruct; - RCC_AHBPeriphClockCmd(RCC_AHBENR_GPIOA, ENABLE); - GPIO_StructInit(&GPIO_InitStruct); - - GPIO_InitStruct.GPIO_Pin = GPIO_Pin_1; - GPIO_InitStruct.GPIO_Speed = GPIO_Speed_10MHz; - GPIO_InitStruct.GPIO_Mode = GPIO_Mode_Out_PP; - GPIO_Init(GPIOA, &GPIO_InitStruct); - - board_led_write(true); - - // KEY on PA0 - GPIO_StructInit(&GPIO_InitStruct); - GPIO_InitStruct.GPIO_Pin = GPIO_Pin_0; - GPIO_InitStruct.GPIO_Speed = GPIO_Speed_10MHz; - GPIO_InitStruct.GPIO_Mode = GPIO_Mode_FLOATING; - GPIO_Init(GPIOA, &GPIO_InitStruct); - - // UART - UART_InitTypeDef UART_InitStruct; - - RCC_APB2PeriphClockCmd(RCC_APB2ENR_UART1, ENABLE); //enableUART1,GPIOAclock - RCC_AHBPeriphClockCmd(RCC_AHBENR_GPIOA, ENABLE); // - //UART initialset - - GPIO_PinAFConfig(GPIOA, GPIO_PinSource9, GPIO_AF_7); - GPIO_PinAFConfig(GPIOA, GPIO_PinSource10, GPIO_AF_7); - - UART_StructInit(&UART_InitStruct); - UART_InitStruct.UART_BaudRate = baudrate; - UART_InitStruct.UART_WordLength = UART_WordLength_8b; - UART_InitStruct.UART_StopBits = UART_StopBits_1; //one stopbit - UART_InitStruct.UART_Parity = UART_Parity_No; //none odd-even verify bit - UART_InitStruct.UART_HardwareFlowControl = UART_HardwareFlowControl_None; //No hardware flow control - UART_InitStruct.UART_Mode = UART_Mode_Rx | UART_Mode_Tx; // receive and sent mode - - UART_Init(UART1, &UART_InitStruct); //initial uart 1 - UART_Cmd(UART1, ENABLE); //enable uart 1 - - //UART1_TX GPIOA.9 - GPIO_StructInit(&GPIO_InitStruct); - GPIO_InitStruct.GPIO_Pin = GPIO_Pin_9; - GPIO_InitStruct.GPIO_Speed = GPIO_Speed_50MHz; - GPIO_InitStruct.GPIO_Mode = GPIO_Mode_AF_PP; - GPIO_Init(GPIOA, &GPIO_InitStruct); - - //UART1_RX GPIOA.10 - GPIO_InitStruct.GPIO_Pin = GPIO_Pin_5; - GPIO_InitStruct.GPIO_Mode = GPIO_Mode_IPU; - GPIO_Init(GPIOA, &GPIO_InitStruct); - -} - - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write (bool state) -{ - state ? (GPIO_ResetBits(GPIOA, GPIO_Pin_1)) : (GPIO_SetBits(GPIOA, GPIO_Pin_1)); -} - -uint32_t board_button_read (void) -{ - uint32_t key = GPIO_ReadInputDataBit(GPIOA, GPIO_Pin_0) == Bit_RESET; - return key; -} - -int board_uart_read (uint8_t *buf, int len) -{ - (void) buf; - (void) len; - return 0; -} - -int board_uart_write (void const *buf, int len) -{ - const char *buff = buf; - while ( len ) - { - while ( (UART1->CSR & UART_IT_TXIEN) == 0 ) - ; //The loop is sent until it is finished - UART1->TDR = (*buff & 0xFF); - buff++; - len--; - } - return len; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void SysTick_Handler (void) -{ - system_ticks++; -} - -uint32_t board_millis (void) -{ - return system_ticks; -} -#endif - -// Required by __libc_init_array in startup code if we are compiling using -// -nostdlib/-nostartfiles. -void _init(void) -{ - -} diff --git a/hw/bsp/mm32/family.c b/hw/bsp/mm32/family.c new file mode 100644 index 000000000..f22fd90a1 --- /dev/null +++ b/hw/bsp/mm32/family.c @@ -0,0 +1,169 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2020 MM32 SE TEAM + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "hal_conf.h" +#include "mm32_device.h" + +#include "bsp/board_api.h" +#include "board.h" + +//--------------------------------------------------------------------+ +// Forward USB interrupt events to TinyUSB IRQ Handler +//--------------------------------------------------------------------+ +void OTG_FS_IRQHandler(void) { + tud_int_handler(0); +} + +void USB_DeviceClockInit(void) { + /* Select USBCLK source */ + // RCC_USBCLKConfig(RCC_USBCLKSource_PLLCLK_Div1); + RCC->CFGR &= ~(0x3 << 22); + RCC->CFGR |= (0x1 << 22); + + /* Enable USB clock */ + RCC->AHB2ENR |= 0x1 << 7; +} +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM DECLARATION +//--------------------------------------------------------------------+ + +extern u32 SystemCoreClock; + +void board_init(void) { +// usb clock + USB_DeviceClockInit(); + + if (SysTick_Config(SystemCoreClock / 1000)) { + while (1); + } + NVIC_SetPriority(SysTick_IRQn, 0x0); + + RCC_AHBPeriphClockCmd(RCC_AHBENR_GPIOA, ENABLE); + + // LED + GPIO_InitTypeDef GPIO_InitStruct; + GPIO_StructInit(&GPIO_InitStruct); + GPIO_InitStruct.GPIO_Pin = GPIO_Pin_15; + GPIO_InitStruct.GPIO_Speed = GPIO_Speed_10MHz; + GPIO_InitStruct.GPIO_Mode = GPIO_Mode_Out_PP; + GPIO_Init(GPIOA, &GPIO_InitStruct); + + board_led_write(true); + + #ifdef BUTTON_PORT + GPIO_StructInit(&GPIO_InitStruct); + GPIO_InitStruct.GPIO_Pin = BUTTON_PIN; + GPIO_InitStruct.GPIO_Speed = GPIO_Speed_10MHz; + GPIO_InitStruct.GPIO_Mode = BUTTON_STATE_ACTIVE ? GPIO_Mode_IPD : GPIO_Mode_IPU; + GPIO_Init(BUTTON_PORT, &GPIO_InitStruct); + #endif + + #ifdef UART_DEV + // UART + UART_InitTypeDef UART_InitStruct; + + RCC_APB2PeriphClockCmd(RCC_APB2ENR_UART1, ENABLE); //enableUART1,GPIOAclock + GPIO_PinAFConfig(GPIOA, UART_TX_PIN, UART_GPIO_AF); + GPIO_PinAFConfig(GPIOA, UART_RX_PIN, UART_GPIO_AF); + + UART_StructInit(&UART_InitStruct); + UART_InitStruct.UART_BaudRate = CFG_BOARD_UART_BAUDRATE; + UART_InitStruct.UART_WordLength = UART_WordLength_8b; + UART_InitStruct.UART_StopBits = UART_StopBits_1; + UART_InitStruct.UART_Parity = UART_Parity_No; + UART_InitStruct.UART_HardwareFlowControl = UART_HardwareFlowControl_None; + UART_InitStruct.UART_Mode = UART_Mode_Rx | UART_Mode_Tx; + + UART_Init(UART_DEV, &UART_InitStruct); + UART_Cmd(UART_DEV, ENABLE); + + GPIO_StructInit(&GPIO_InitStruct); + GPIO_InitStruct.GPIO_Pin = 1 << UART_TX_PIN; + GPIO_InitStruct.GPIO_Speed = GPIO_Speed_50MHz; + GPIO_InitStruct.GPIO_Mode = GPIO_Mode_AF_PP; + GPIO_Init(UART_GPIO_PORT, &GPIO_InitStruct); + + GPIO_InitStruct.GPIO_Pin = 1 << UART_RX_PIN; + GPIO_InitStruct.GPIO_Mode = GPIO_Mode_IPU; + GPIO_Init(UART_GPIO_PORT, &GPIO_InitStruct); + #endif +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) { + GPIO_WriteBit(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1 - LED_STATE_ON)); +} + +uint32_t board_button_read(void) { +#ifdef BUTTON_PORT + return GPIO_ReadInputDataBit(BUTTON_PORT, BUTTON_PIN) == BUTTON_STATE_ACTIVE; +#else + return 0; +#endif +} + +int board_uart_read(uint8_t* buf, int len) { + (void) buf; + (void) len; + return 0; +} + +int board_uart_write(void const* buf, int len) { + #ifdef UART_DEV + const char* buff = buf; + while (len) { + while ((UART1->CSR & UART_IT_TXIEN) == 0); //The loop is sent until it is finished + UART1->TDR = (*buff & 0xFF); + buff++; + len--; + } + return len; + #else + (void) buf; + (void) len; + return 0; + #endif +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; + +void SysTick_Handler(void) { + system_ticks++; +} + +uint32_t board_millis(void) { + return system_ticks; +} +#endif + +// Required by __libc_init_array in startup code if we are compiling using +// -nostdlib/-nostartfiles. +void _init(void) { +} diff --git a/hw/bsp/mm32/family.cmake b/hw/bsp/mm32/family.cmake new file mode 100644 index 000000000..bf315acaa --- /dev/null +++ b/hw/bsp/mm32/family.cmake @@ -0,0 +1,101 @@ +include_guard() + +include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) + +string(REPLACE "mm32f" "MM32F" MCU_VARIANT_UPPER ${MCU_VARIANT}) +set(SDK_DIR ${TOP}/hw/mcu/mindmotion/mm32sdk/${MCU_VARIANT_UPPER}) +set(CMSIS_5 ${TOP}/lib/CMSIS_5) + +# toolchain set up +set(CMAKE_SYSTEM_PROCESSOR cortex-m3 CACHE INTERNAL "System Processor") +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) + +set(FAMILY_MCUS MM32F327X CACHE INTERNAL "") + + +#------------------------------------ +# BOARD_TARGET +#------------------------------------ +# only need to be built ONCE for all examples +function(add_board_target BOARD_TARGET) + if (TARGET ${BOARD_TARGET}) + return() + endif() + + # Startup & Linker script + set(STARTUP_FILE_GNU ${SDK_DIR}/Source/GCC_StartAsm/startup_${MCU_VARIANT}_gcc.s) + set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) + set(STARTUP_FILE_IAR ${SDK_DIR}/Source/IAR_StartAsm/startup_${MCU_VARIANT}_iar.s) + + set(LD_FILE_Clang ${LD_FILE_GNU}) + # set(LD_FILE_IAR ) + + add_library(${BOARD_TARGET} STATIC + ${SDK_DIR}/Source/system_${MCU_VARIANT}.c + ${SDK_DIR}/HAL_Lib/Src/hal_gpio.c + ${SDK_DIR}/HAL_Lib/Src/hal_rcc.c + ${SDK_DIR}/HAL_Lib/Src/hal_uart.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} + ) + target_include_directories(${BOARD_TARGET} PUBLIC + ${CMSIS_5}/CMSIS/Core/Include + ${SDK_DIR}/Include + ${SDK_DIR}/HAL_Lib/Inc + ) + + update_board(${BOARD_TARGET}) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -nostartfiles + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_Clang}" + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () +endfunction() + + +#------------------------------------ +# Functions +#------------------------------------ +function(family_configure_example TARGET RTOS) + family_configure_common(${TARGET} ${RTOS}) + + # Board target + add_board_target(board_${BOARD}) + + #---------- Port Specific ---------- + # These files are built for each example since it depends on example's tusb_config.h + target_sources(${TARGET} PUBLIC + # BSP + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ) + target_include_directories(${TARGET} PUBLIC + # family, hw, board + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} + ) + + # Add TinyUSB target and port source + family_add_tinyusb(${TARGET} OPT_MCU_MM32F327X ${RTOS}) + target_sources(${TARGET}-tinyusb PUBLIC + ${TOP}/src/portable/mindmotion/mm32/dcd_mm32f327x_otg.c + ) + target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + + # Link dependencies + target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) + + # Flashing + family_flash_jlink(${TARGET}) +endfunction() diff --git a/hw/bsp/mm32/family.mk b/hw/bsp/mm32/family.mk index 2e8e595b9..a790663ab 100644 --- a/hw/bsp/mm32/family.mk +++ b/hw/bsp/mm32/family.mk @@ -1,29 +1,33 @@ UF2_FAMILY_ID = 0x0 -SDK_DIR = hw/mcu/mindmotion/mm32sdk -DEPS_SUBMODULES += lib/CMSIS_5 $(SDK_DIR) - include $(TOP)/$(BOARD_PATH)/board.mk + +MCU_VARIANT_UPPER = $(subst mm32f,MM32F,${MCU_VARIANT}) +SDK_DIR = hw/mcu/mindmotion/mm32sdk/${MCU_VARIANT_UPPER} + CPU_CORE ?= cortex-m3 CFLAGS += \ -flto \ - -nostdlib -nostartfiles \ - -DCFG_TUSB_MCU=OPT_MCU_MM32F327X + -DCFG_TUSB_MCU=OPT_MCU_MM32F327X \ # suppress warning caused by vendor mcu driver CFLAGS += -Wno-error=unused-parameter -Wno-error=maybe-uninitialized -Wno-error=cast-qual -LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs +LDFLAGS_GCC += \ + -nostdlib -nostartfiles \ + -specs=nosys.specs -specs=nano.specs \ SRC_C += \ src/portable/mindmotion/mm32/dcd_mm32f327x_otg.c \ - $(SDK_DIR)/mm32f327x/MM32F327x/Source/system_mm32f327x.c \ - $(SDK_DIR)/mm32f327x/MM32F327x/HAL_Lib/Src/hal_gpio.c \ - $(SDK_DIR)/mm32f327x/MM32F327x/HAL_Lib/Src/hal_rcc.c \ - $(SDK_DIR)/mm32f327x/MM32F327x/HAL_Lib/Src/hal_uart.c \ + $(SDK_DIR)/Source/system_${MCU_VARIANT}.c \ + $(SDK_DIR)/HAL_Lib/Src/hal_gpio.c \ + $(SDK_DIR)/HAL_Lib/Src/hal_rcc.c \ + $(SDK_DIR)/HAL_Lib/Src/hal_uart.c \ + +SRC_S += ${SDK_DIR}/Source/GCC_StartAsm/startup_${MCU_VARIANT}_gcc.s INC += \ $(TOP)/$(BOARD_PATH) \ $(TOP)/lib/CMSIS_5/CMSIS/Core/Include \ - $(TOP)/$(SDK_DIR)/mm32f327x/MM32F327x/Include \ - $(TOP)/$(SDK_DIR)/mm32f327x/MM32F327x/HAL_Lib/Inc + $(TOP)/$(SDK_DIR)/Include \ + $(TOP)/$(SDK_DIR)/HAL_Lib/Inc diff --git a/tools/get_deps.py b/tools/get_deps.py index 75dd283ea..cdb5dafe1 100644 --- a/tools/get_deps.py +++ b/tools/get_deps.py @@ -39,7 +39,7 @@ deps_optional = { '9e8b37e307d8404033bb881623a113931e1edf27', 'sam3x samd11 samd21 samd51 samd5x_e5x same5x same7x saml2x samg'], 'hw/mcu/mindmotion/mm32sdk': ['https://github.com/hathach/mm32sdk.git', - '0b79559eb411149d36e073c1635c620e576308d4', + 'b93e856211060ae825216c6a1d6aa347ec758843', 'mm32'], 'hw/mcu/nordic/nrfx': ['https://github.com/NordicSemiconductor/nrfx.git', '7c47cc0a56ce44658e6da2458e86cd8783ccc4a2', -- cgit v1.3.1 From ba6babf570752a28379aab51d9c27e7b9efe872d Mon Sep 17 00:00:00 2001 From: Ha Thach Date: Thu, 9 May 2024 20:43:46 +0700 Subject: Rework ci (#2631) * add name field to usbd_class_driver_t * ci: use set matrix py script * add riscv32 and cmake support for ch32v307, fomu, gd32vf103 * update build_cmake.py to take --family --board --toolchain * separate hil test to its own workflow * move esp32 board into separated hil json * add make build to ci * remov build_make.py * build.py support esp32 board * setup toolchain support esp-idf * fix missing click * merge family in matrix build to reduce jobs * skip cifuzz since it still has issue with get_deps and click --- .github/actions/prepare_build/action.yml | 30 +++ .github/actions/setup_toolchain/action.yml | 31 +++ .../actions/setup_toolchain/download/action.yml | 29 ++ .github/workflows/build_aarch64.yml | 70 ----- .github/workflows/build_arm.yml | 57 ---- .github/workflows/build_cmake.yml | 295 ++++----------------- .github/workflows/build_esp.yml | 19 +- .github/workflows/build_family.yml | 64 +++++ .github/workflows/build_iar.yml | 4 +- .github/workflows/build_renesas.yml | 6 +- .github/workflows/build_riscv.yml | 71 ----- .github/workflows/build_win_mac.yml | 6 +- .github/workflows/ci_set_matrix.py | 51 ++++ .github/workflows/cifuzz.yml | 3 + .github/workflows/codeql-buildscript.sh | 3 +- .github/workflows/hil_test.yml | 125 +++++++++ .github/workflows/pre-commit.yml | 1 + .idea/cmake.xml | 8 +- examples/build_system/cmake/cpu/rv32i-ilp32.cmake | 19 ++ .../build_system/cmake/cpu/rv32imac-ilp32.cmake | 18 ++ .../build_system/cmake/toolchain/riscv_gcc.cmake | 21 ++ examples/build_system/make/cpu/rv32i-ilp32.mk | 13 + examples/build_system/make/cpu/rv32imac-ilp32.mk | 13 + examples/build_system/make/toolchain/riscv_gcc.mk | 20 ++ examples/device/video_capture/skip.txt | 1 - .../ch32v307/boards/ch32v307v_r1_1v0/board.cmake | 4 + .../ch32v307/boards/ch32v307v_r1_1v0/debug_uart.c | 110 -------- .../ch32v307/boards/ch32v307v_r1_1v0/debug_uart.h | 31 --- hw/bsp/ch32v307/debug_uart.c | 110 ++++++++ hw/bsp/ch32v307/debug_uart.h | 31 +++ hw/bsp/ch32v307/family.cmake | 114 ++++++++ hw/bsp/ch32v307/family.mk | 12 +- .../led_strip_rmt_ws2812/dependencies.lock | 15 -- hw/bsp/family_support.cmake | 24 +- hw/bsp/fomu/boards/fomu/board.cmake | 4 + hw/bsp/fomu/family.c | 121 +++++++++ hw/bsp/fomu/family.cmake | 91 +++++++ hw/bsp/fomu/family.mk | 9 +- hw/bsp/fomu/fomu.c | 120 --------- .../boards/sipeed_longan_nano/board.cmake | 13 + .../gd32vf103/boards/sipeed_longan_nano/board.mk | 1 - hw/bsp/gd32vf103/family.c | 4 +- hw/bsp/gd32vf103/family.cmake | 119 +++++++++ hw/bsp/gd32vf103/family.mk | 10 +- hw/bsp/lpc51/family.cmake | 1 - src/device/usbd.c | 28 +- src/device/usbd_pvt.h | 7 +- test/hil/hfp.json | 25 ++ test/hil/hil_hfp.json | 25 -- test/hil/hil_pi4.json | 37 --- test/hil/hil_test.py | 69 +++-- test/hil/pi4.json | 27 ++ test/hil/pi4_esp32.json | 14 + tools/build.py | 177 +++++++++++++ tools/build_board.py | 69 ----- tools/build_cmake.py | 105 -------- tools/build_make.py | 80 ------ tools/get_deps.py | 54 ++-- 58 files changed, 1482 insertions(+), 1157 deletions(-) create mode 100644 .github/actions/prepare_build/action.yml create mode 100644 .github/actions/setup_toolchain/action.yml create mode 100644 .github/actions/setup_toolchain/download/action.yml delete mode 100644 .github/workflows/build_aarch64.yml delete mode 100644 .github/workflows/build_arm.yml create mode 100644 .github/workflows/build_family.yml delete mode 100644 .github/workflows/build_riscv.yml create mode 100644 .github/workflows/ci_set_matrix.py create mode 100644 .github/workflows/hil_test.yml create mode 100644 examples/build_system/cmake/cpu/rv32i-ilp32.cmake create mode 100644 examples/build_system/cmake/cpu/rv32imac-ilp32.cmake create mode 100644 examples/build_system/cmake/toolchain/riscv_gcc.cmake create mode 100644 examples/build_system/make/cpu/rv32i-ilp32.mk create mode 100644 examples/build_system/make/cpu/rv32imac-ilp32.mk create mode 100644 examples/build_system/make/toolchain/riscv_gcc.mk create mode 100644 hw/bsp/ch32v307/boards/ch32v307v_r1_1v0/board.cmake delete mode 100644 hw/bsp/ch32v307/boards/ch32v307v_r1_1v0/debug_uart.c delete mode 100644 hw/bsp/ch32v307/boards/ch32v307v_r1_1v0/debug_uart.h create mode 100644 hw/bsp/ch32v307/debug_uart.c create mode 100644 hw/bsp/ch32v307/debug_uart.h create mode 100644 hw/bsp/ch32v307/family.cmake delete mode 100644 hw/bsp/espressif/components/led_strip/examples/led_strip_rmt_ws2812/dependencies.lock create mode 100644 hw/bsp/fomu/boards/fomu/board.cmake create mode 100644 hw/bsp/fomu/family.c create mode 100644 hw/bsp/fomu/family.cmake delete mode 100644 hw/bsp/fomu/fomu.c create mode 100644 hw/bsp/gd32vf103/boards/sipeed_longan_nano/board.cmake create mode 100644 hw/bsp/gd32vf103/family.cmake create mode 100644 test/hil/hfp.json delete mode 100644 test/hil/hil_hfp.json delete mode 100644 test/hil/hil_pi4.json create mode 100644 test/hil/pi4.json create mode 100644 test/hil/pi4_esp32.json create mode 100644 tools/build.py delete mode 100644 tools/build_board.py delete mode 100644 tools/build_cmake.py delete mode 100644 tools/build_make.py (limited to '.github/workflows') diff --git a/.github/actions/prepare_build/action.yml b/.github/actions/prepare_build/action.yml new file mode 100644 index 000000000..5f2c544c1 --- /dev/null +++ b/.github/actions/prepare_build/action.yml @@ -0,0 +1,30 @@ +name: Prepare to build + +inputs: + family: + required: true + type: string + +runs: + using: "composite" + steps: + - name: Setup Python + uses: actions/setup-python@v5 + with: + python-version: '3.x' + + - name: Checkout pico-sdk for rp2040 + if: contains(inputs.family, 'rp2040') + uses: actions/checkout@v4 + with: + repository: raspberrypi/pico-sdk + ref: develop + path: pico-sdk + + - name: Get Dependencies + run: | + sudo apt install -y ninja-build + pip install click + python3 tools/get_deps.py ${{ inputs.family }} + echo >> $GITHUB_ENV "PICO_SDK_PATH=$GITHUB_WORKSPACE/pico-sdk" + shell: bash diff --git a/.github/actions/setup_toolchain/action.yml b/.github/actions/setup_toolchain/action.yml new file mode 100644 index 000000000..b59ece116 --- /dev/null +++ b/.github/actions/setup_toolchain/action.yml @@ -0,0 +1,31 @@ +name: Setup Toolchain + +inputs: + toolchain: + required: true + type: string + toolchain_url: + required: false + type: string + +runs: + using: "composite" + steps: + - name: Install ARM GCC + if: inputs.toolchain == 'arm-gcc' + uses: carlosperate/arm-none-eabi-gcc-action@v1 + with: + release: '12.3.Rel1' + + - name: Pull ESP-IDF docker + if: inputs.toolchain == 'esp-idf' + run: docker pull espressif/idf:latest + shell: bash + + - name: Download Toolchain + if: >- + inputs.toolchain != 'arm-gcc' && + inputs.toolchain != 'esp-idf' + uses: ./.github/actions/setup_toolchain/download + with: + toolchain_url: ${{ inputs.toolchain_url }} diff --git a/.github/actions/setup_toolchain/download/action.yml b/.github/actions/setup_toolchain/download/action.yml new file mode 100644 index 000000000..db85e9027 --- /dev/null +++ b/.github/actions/setup_toolchain/download/action.yml @@ -0,0 +1,29 @@ +name: Download Toolchain + +inputs: + toolchain_url: + required: true + type: string + +runs: + using: "composite" + steps: + - name: Cache Toolchain + uses: actions/cache@v4 + id: cache-toolchain + with: + path: ~/cache/toolchain + key: ${{ runner.os }}-${{ inputs.toolchain_url }} + + - name: Install Toolchain + if: steps.cache-toolchain.outputs.cache-hit != 'true' + run: | + mkdir -p ~/cache/toolchain + wget --progress=dot:mega ${{ inputs.toolchain_url }} -O toolchain.tar.gz + tar -C ~/cache/toolchain -xaf toolchain.tar.gz + shell: bash + + - name: Set Toolchain Path + run: | + echo >> $GITHUB_PATH `echo ~/cache/toolchain/*/bin` + shell: bash diff --git a/.github/workflows/build_aarch64.yml b/.github/workflows/build_aarch64.yml deleted file mode 100644 index 237692498..000000000 --- a/.github/workflows/build_aarch64.yml +++ /dev/null @@ -1,70 +0,0 @@ -name: Build AArch64 - -on: - workflow_dispatch: - push: - paths: - - 'src/**' - - 'examples/**' - - 'lib/**' - - 'hw/**' - - '.github/workflows/build_aarch64.yml' - pull_request: - branches: [ master ] - paths: - - 'src/**' - - 'examples/**' - - 'lib/**' - - 'hw/**' - - '.github/workflows/build_aarch64.yml' - -concurrency: - group: ${{ github.workflow }}-${{ github.head_ref || github.run_id }} - cancel-in-progress: true - -jobs: - # --------------------------------------- - # Build AARCH64 family - # --------------------------------------- - build-arm: - runs-on: ubuntu-latest - strategy: - fail-fast: false - matrix: - family: - # Alphabetical order - - 'broadcom_64bit' - steps: - - name: Setup Python - uses: actions/setup-python@v5 - with: - python-version: '3.x' - - - name: Checkout TinyUSB - uses: actions/checkout@v4 - - - name: Set Toolchain URL - run: echo >> $GITHUB_ENV TOOLCHAIN_URL=https://developer.arm.com/-/media/Files/downloads/gnu-a/10.3-2021.07/binrel/gcc-arm-10.3-2021.07-x86_64-aarch64-none-elf.tar.xz - - - name: Cache Toolchain - uses: actions/cache@v4 - id: cache-toolchain - with: - path: ~/cache/ - key: ${{ runner.os }}-21-11-02-${{ env.TOOLCHAIN_URL }} - - - name: Install Toolchain - if: steps.cache-toolchain.outputs.cache-hit != 'true' - run: | - mkdir -p ~/cache/toolchain - wget --progress=dot:mega $TOOLCHAIN_URL -O toolchain.tar.gz - tar -C ~/cache/toolchain -xaf toolchain.tar.gz - - - name: Set Toolchain Path - run: echo >> $GITHUB_PATH `echo ~/cache/toolchain/*/bin` - - - name: Get Dependencies - run: python3 tools/get_deps.py ${{ matrix.family }} - - - name: Build - run: python3 tools/build_make.py ${{ matrix.family }} diff --git a/.github/workflows/build_arm.yml b/.github/workflows/build_arm.yml deleted file mode 100644 index 14c6d519c..000000000 --- a/.github/workflows/build_arm.yml +++ /dev/null @@ -1,57 +0,0 @@ -name: Build ARM - -on: - workflow_dispatch: - push: - paths: - - 'src/**' - - 'examples/**' - - 'lib/**' - - 'hw/**' - - 'tools/get_deps.py' - - '.github/workflows/build_arm.yml' - pull_request: - branches: [ master ] - paths: - - 'src/**' - - 'examples/**' - - 'lib/**' - - 'hw/**' - - 'tools/get_deps.py' - - '.github/workflows/build_arm.yml' - -concurrency: - group: ${{ github.workflow }}-${{ github.head_ref || github.run_id }} - cancel-in-progress: true - -jobs: - # --------------------------------------- - # Build ARM family - # --------------------------------------- - build-arm: - runs-on: ubuntu-latest - strategy: - fail-fast: false - matrix: - family: - # Alphabetical order - - 'mm32' - steps: - - name: Setup Python - uses: actions/setup-python@v5 - with: - python-version: '3.x' - - - name: Install ARM GCC - uses: carlosperate/arm-none-eabi-gcc-action@v1 - with: - release: '11.2-2022.02' - - - name: Checkout TinyUSB - uses: actions/checkout@v4 - - - name: Get Dependencies - run: python3 tools/get_deps.py ${{ matrix.family }} - - - name: Build - run: python3 tools/build_make.py ${{ matrix.family }} diff --git a/.github/workflows/build_cmake.yml b/.github/workflows/build_cmake.yml index c1f85ad9c..b62a0e9bd 100644 --- a/.github/workflows/build_cmake.yml +++ b/.github/workflows/build_cmake.yml @@ -1,4 +1,4 @@ -name: Build CMake +name: Build on: workflow_dispatch: @@ -8,9 +8,11 @@ on: - 'examples/**' - 'lib/**' - 'hw/**' - - 'test/hil/**' - 'tools/get_deps.py' + - 'tools/build.py' + - '.github/actions/**' - '.github/workflows/build_cmake.yml' + - '.github/workflows/ci_set_matrix.py' pull_request: branches: [ master ] paths: @@ -18,141 +20,20 @@ on: - 'examples/**' - 'lib/**' - 'hw/**' - - 'test/hil/**' - 'tools/get_deps.py' + - 'tools/build.py' + - '.github/actions/**' - '.github/workflows/build_cmake.yml' - + - '.github/workflows/ci_set_matrix.py' concurrency: group: ${{ github.workflow }}-${{ github.head_ref || github.run_id }} cancel-in-progress: true jobs: - # --------------------------------------- - # Build ARM with GCC - # --------------------------------------- - arm-gcc: - runs-on: ubuntu-latest - strategy: - fail-fast: false - matrix: - family: - # Alphabetical order - - 'broadcom_32bit' - - 'imxrt' - - 'kinetis_k kinetis_kl kinetis_k32l2' - - 'lpc11 lpc13 lpc15' - - 'lpc17 lpc18 lpc40 lpc43' - - 'lpc51 lpc54 lpc55' - - 'mcx' - - 'msp432e4' - - 'mm32' - - 'nrf' - - 'ra' - - 'rp2040' - - 'samd11 samd21 saml2x samd5x_e5x samg' - - 'stm32f0' - - 'stm32f1' - - 'stm32f2' - - 'stm32f3' - - 'stm32f4' - - 'stm32f7' - - 'stm32g0' - - 'stm32g4' - - 'stm32h5' - - 'stm32h7' - - 'stm32l4' - - 'stm32u5' - - 'stm32wb' - - 'tm4c' - - 'xmc4000' - steps: - - name: Setup Python - uses: actions/setup-python@v5 - with: - python-version: '3.x' - - - name: Install ARM GCC - uses: carlosperate/arm-none-eabi-gcc-action@v1 - with: - release: '12.3.Rel1' - - - name: Checkout TinyUSB - uses: actions/checkout@v4 - - - name: Checkout pico-sdk for rp2040 - if: matrix.family == 'rp2040' - uses: actions/checkout@v4 - with: - repository: raspberrypi/pico-sdk - ref: develop - path: pico-sdk - - - name: Get Dependencies - run: | - sudo apt install -y ninja-build - python3 tools/get_deps.py ${{ matrix.family }} - - - name: Build - run: python tools/build_cmake.py ${{ matrix.family }} - env: - PICO_SDK_PATH: ${{ github.workspace }}/pico-sdk - - - name: Upload Artifacts for Hardware Testing (rp2040) - if: contains(matrix.family, 'rp2040') && github.repository_owner == 'hathach' - uses: actions/upload-artifact@v4 - with: - name: raspberry_pi_pico - path: | - cmake-build/cmake-build-raspberry_pi_pico/*/*/*.elf - - - name: Upload Artifacts for Hardware Testing (nRF) - if: contains(matrix.family, 'nrf') && github.repository_owner == 'hathach' - uses: actions/upload-artifact@v4 - with: - name: feather_nrf52840_express - path: | - cmake-build/cmake-build-feather_nrf52840_express/*/*/*.elf - - - name: Upload Artifacts for Hardware Testing (samd51) - if: contains(matrix.family, 'samd5x_e5x') && github.repository_owner == 'hathach' - uses: actions/upload-artifact@v4 - with: - name: itsybitsy_m4 - path: | - cmake-build/cmake-build-itsybitsy_m4/*/*/*.bin - - # --------------------------------------- - # Build ARM with Clang - # --------------------------------------- - arm-clang: + set-matrix: runs-on: ubuntu-latest - strategy: - fail-fast: false - matrix: - family: - # Alphabetical order - - 'imxrt' - - 'kinetis_k kinetis_kl' - - 'lpc17 lpc18 lpc40 lpc43' - - 'lpc54 lpc55' - #- 'mcx' not working with gcc anymore, need to fix this first - - 'nrf' - #- 'ra' port later - #- 'rp2040' port later - - 'samd21' - - 'samd5x_e5x' - - 'stm32f0' - - 'stm32f1' - - 'stm32f2' - - 'stm32f3' - - 'stm32f4' - - 'stm32f7' - - 'stm32g0' - - 'stm32g4' - - 'stm32h5' - - 'stm32h7' - - 'stm32l4' - - 'stm32u5' + outputs: + json: ${{ steps.set-matrix-json.outputs.matrix }} steps: - name: Setup Python uses: actions/setup-python@v5 @@ -162,137 +43,51 @@ jobs: - name: Checkout TinyUSB uses: actions/checkout@v4 - - name: Checkout pico-sdk for rp2040 - if: matrix.family == 'rp2040' - uses: actions/checkout@v4 - with: - repository: raspberrypi/pico-sdk - ref: develop - path: pico-sdk - - - name: Set Toolchain URL - run: echo >> $GITHUB_ENV TOOLCHAIN_URL=https://github.com/ARM-software/LLVM-embedded-toolchain-for-Arm/releases/download/release-17.0.1/LLVMEmbeddedToolchainForArm-17.0.1-Linux-x86_64.tar.xz - - - name: Cache Toolchain - uses: actions/cache@v4 - id: cache-toolchain - with: - path: ~/cache/ - key: ${{ runner.os }}-24-04-17-${{ env.TOOLCHAIN_URL }} - - - name: Install Toolchain - if: steps.cache-toolchain.outputs.cache-hit != 'true' - run: | - mkdir -p ~/cache/toolchain - wget --progress=dot:mega $TOOLCHAIN_URL -O toolchain.tar.xz - tar -C ~/cache/toolchain -xaf toolchain.tar.xz - - - name: Prepare to build + - name: Generate matrix json + id: set-matrix-json run: | - echo >> $GITHUB_PATH `echo ~/cache/toolchain/*/bin` - sudo apt install -y ninja-build - python3 tools/get_deps.py ${{ matrix.family }} - - - name: Build - run: python tools/build_cmake.py ${{ matrix.family }} -DTOOLCHAIN=clang - env: - PICO_SDK_PATH: ${{ github.workspace }}/pico-sdk + MATRIX_JSON=$(python .github/workflows/ci_set_matrix.py) + echo "matrix=$MATRIX_JSON" + echo "matrix=$MATRIX_JSON" >> $GITHUB_OUTPUT # --------------------------------------- - # Build MSP430 with GCC + # Build CMake # --------------------------------------- - msp430-gcc: - runs-on: ubuntu-latest + cmake: + needs: set-matrix + uses: ./.github/workflows/build_family.yml strategy: fail-fast: false matrix: - family: - # Alphabetical order - - 'msp430' - steps: - - name: Setup Python - uses: actions/setup-python@v5 - with: - python-version: '3.x' - - - name: Checkout TinyUSB - uses: actions/checkout@v4 - - - name: Set Toolchain URL - run: echo >> $GITHUB_ENV TOOLCHAIN_URL=http://software-dl.ti.com/msp430/msp430_public_sw/mcu/msp430/MSPGCC/9_2_0_0/export/msp430-gcc-9.2.0.50_linux64.tar.bz2 - - - name: Cache Toolchain - uses: actions/cache@v4 - id: cache-toolchain - with: - path: ~/cache/ - key: ${{ runner.os }}-24-04-17-${{ env.TOOLCHAIN_URL }} - - - name: Install Toolchain - if: steps.cache-toolchain.outputs.cache-hit != 'true' - run: | - mkdir -p ~/cache/toolchain - wget --progress=dot:mega $TOOLCHAIN_URL -O toolchain.tar.bz2 - tar -C ~/cache/toolchain -xaf toolchain.tar.bz2 - - - name: Prepare to build - run: | - echo >> $GITHUB_PATH `echo ~/cache/toolchain/*/bin` - sudo apt install -y ninja-build - python3 tools/get_deps.py ${{ matrix.family }} - - - name: Build - run: python tools/build_cmake.py ${{ matrix.family }} + toolchain: + - 'aarch64-gcc' + - 'arm-clang' + - 'arm-gcc' + - 'msp430-gcc' + - 'riscv-gcc' + with: + build-system: 'cmake' + toolchain: ${{ matrix.toolchain }} + toolchain_url: ${{ fromJSON(needs.set-matrix.outputs.json)[matrix.toolchain].toolchain_url }} + build-family: ${{ toJSON(fromJSON(needs.set-matrix.outputs.json)[matrix.toolchain].family) }} # --------------------------------------- - # Hardware in the loop (HIL) - # Current self-hosted instance is running on an RPI4. For attached hardware checkout hil_pi4.json + # Build Make # --------------------------------------- - hil-test: - # run only with hathach's commit due to limited resource on RPI4 - if: github.repository_owner == 'hathach' - needs: arm-gcc - runs-on: [self-hosted, rp2040, nrf52840, hardware-in-the-loop] + make: + needs: set-matrix + uses: ./.github/workflows/build_family.yml strategy: fail-fast: false matrix: - board: - - 'feather_nrf52840_express' - - 'itsybitsy_m4' - - 'raspberry_pi_pico' - steps: - - name: Clean workspace - run: | - echo "Cleaning up previous run" - rm -rf "${{ github.workspace }}" - mkdir -p "${{ github.workspace }}" - - # USB bus on rpi4 is not stable, reset it before testing - - name: Reset USB bus - run: | - lsusb - lsusb -t - # reset VIA Labs 2.0 hub - sudo usbreset 001/002 - - # legacy code - #for port in $(lspci | grep USB | cut -d' ' -f1); do - # echo -n "0000:${port}"| sudo tee /sys/bus/pci/drivers/xhci_hcd/unbind; - # sleep 0.1; - # echo -n "0000:${port}" | sudo tee /sys/bus/pci/drivers/xhci_hcd/bind; - #done - - - name: Checkout test/hil - uses: actions/checkout@v4 - with: - sparse-checkout: test/hil - - - name: Download Artifacts - uses: actions/download-artifact@v4 - with: - name: ${{ matrix.board }} - path: cmake-build/cmake-build-${{ matrix.board }} - - - name: Test on actual hardware - run: | - python3 test/hil/hil_test.py --board ${{ matrix.board }} hil_pi4.json + toolchain: + - 'aarch64-gcc' + #- 'arm-clang' + - 'arm-gcc' + - 'msp430-gcc' + - 'riscv-gcc' + with: + build-system: 'make' + toolchain: ${{ matrix.toolchain }} + toolchain_url: ${{ fromJSON(needs.set-matrix.outputs.json)[matrix.toolchain].toolchain_url }} + build-family: ${{ toJSON(fromJSON(needs.set-matrix.outputs.json)[matrix.toolchain].family) }} diff --git a/.github/workflows/build_esp.yml b/.github/workflows/build_esp.yml index 4108a58a5..66fa8548e 100644 --- a/.github/workflows/build_esp.yml +++ b/.github/workflows/build_esp.yml @@ -41,14 +41,16 @@ jobs: with: python-version: '3.x' - - name: Pull ESP-IDF docker - run: docker pull espressif/idf:latest - - name: Checkout TinyUSB uses: actions/checkout@v4 + - name: Setup Toolchain + uses: ./.github/actions/setup_toolchain + with: + toolchain: 'esp-idf' + - name: Build - run: docker run --rm -v $PWD:/project -w /project espressif/idf:v5.1.1 python3 tools/build_esp32.py ${{ matrix.board }} + run: docker run --rm -v $PWD:/project -w /project espressif/idf:v5.1.1 python3 tools/build.py -b ${{ matrix.board }} - name: Upload Artifacts for Hardware Testing if: matrix.board == 'espressif_s3_devkitm' && github.repository_owner == 'hathach' @@ -91,13 +93,6 @@ jobs: # reset VIA Labs 2.0 hub sudo usbreset 001/002 - # legacy code - #for port in $(lspci | grep USB | cut -d' ' -f1); do - # echo -n "0000:${port}"| sudo tee /sys/bus/pci/drivers/xhci_hcd/unbind; - # sleep 0.1; - # echo -n "0000:${port}" | sudo tee /sys/bus/pci/drivers/xhci_hcd/bind; - #done - - name: Checkout test/hil uses: actions/checkout@v4 with: @@ -111,4 +106,4 @@ jobs: - name: Test on actual hardware run: | - python3 test/hil/hil_test.py --board ${{ matrix.board }} hil_pi4.json + python3 test/hil/hil_test.py --board ${{ matrix.board }} pi4_esp32.json diff --git a/.github/workflows/build_family.yml b/.github/workflows/build_family.yml new file mode 100644 index 000000000..2e89267a3 --- /dev/null +++ b/.github/workflows/build_family.yml @@ -0,0 +1,64 @@ +name: Build family + +on: + workflow_call: + inputs: + build-system: + required: true + type: string + toolchain: + required: true + type: string + toolchain_url: + required: true + type: string + build-family: + required: true + type: string + +jobs: + family: + runs-on: ubuntu-latest + strategy: + fail-fast: false + matrix: + family: ${{ fromJSON(inputs.build-family) }} + steps: + - name: Checkout TinyUSB + uses: actions/checkout@v4 + + - name: Setup Python + uses: actions/setup-python@v5 + with: + python-version: '3.x' + + - name: Setup Toolchain + uses: ./.github/actions/setup_toolchain + with: + toolchain: ${{ inputs.toolchain }} + toolchain_url: ${{ inputs.toolchain_url }} + + - name: Checkout pico-sdk for rp2040 + if: contains(matrix.family, 'rp2040') + uses: actions/checkout@v4 + with: + repository: raspberrypi/pico-sdk + ref: develop + path: pico-sdk + + - name: Get Dependencies + run: | + sudo apt install -y ninja-build + pip install click + python3 tools/get_deps.py ${{ matrix.family }} + + - name: Build + run: | + OPTION="" + if [[ "${{ inputs.toolchain }}" == *"clang"* ]]; then + OPTION="--toolchain clang" + fi + echo "OPTION=$OPTION" + python tools/build.py -s ${{ inputs.build-system }} $OPTION ${{ matrix.family }} + env: + PICO_SDK_PATH: ${{ github.workspace }}/pico-sdk diff --git a/.github/workflows/build_iar.yml b/.github/workflows/build_iar.yml index 6b1493a97..c4a7f96b7 100644 --- a/.github/workflows/build_iar.yml +++ b/.github/workflows/build_iar.yml @@ -52,8 +52,8 @@ jobs: run: python3 tools/get_deps.py ${{ matrix.family }} - name: Build - run: python3 tools/build_cmake.py ${{ matrix.family }} -DTOOLCHAIN=iar + run: python3 tools/build.py --toolchain iar ${{ matrix.family }} - name: Test on actual hardware (hardware in the loop) run: | - python3 test/hil/hil_test.py hil_hfp.json + python3 test/hil/hil_test.py hfp.json diff --git a/.github/workflows/build_renesas.yml b/.github/workflows/build_renesas.yml index fbc12d285..8c83bdbbf 100644 --- a/.github/workflows/build_renesas.yml +++ b/.github/workflows/build_renesas.yml @@ -64,7 +64,9 @@ jobs: run: echo >> $GITHUB_PATH `echo ~/cache/toolchain/*/bin` - name: Get Dependencies - run: python3 tools/get_deps.py ${{ matrix.family }} + run: | + pip install click + python3 tools/get_deps.py ${{ matrix.family }} - name: Build - run: python3 tools/build_make.py ${{ matrix.family }} + run: python3 tools/build.py -s make ${{ matrix.family }} diff --git a/.github/workflows/build_riscv.yml b/.github/workflows/build_riscv.yml deleted file mode 100644 index 7f5031ff1..000000000 --- a/.github/workflows/build_riscv.yml +++ /dev/null @@ -1,71 +0,0 @@ -name: Build RISC-V - -on: - workflow_dispatch: - push: - paths: - - 'src/**' - - 'examples/**' - - 'lib/**' - - 'hw/**' - - 'tools/get_deps.py' - - '.github/workflows/build_riscv.yml' - pull_request: - branches: [ master ] - paths: - - 'src/**' - - 'examples/**' - - 'lib/**' - - 'hw/**' - - 'tools/get_deps.py' - - '.github/workflows/build_riscv.yml' - -concurrency: - group: ${{ github.workflow }}-${{ github.head_ref || github.run_id }} - cancel-in-progress: true - -jobs: - build-riscv: - runs-on: ubuntu-latest - strategy: - fail-fast: false - matrix: - family: - # Alphabetical order - - 'ch32v307' - - 'fomu' - - 'gd32vf103' - steps: - - name: Setup Python - uses: actions/setup-python@v5 - with: - python-version: '3.x' - - - name: Checkout TinyUSB - uses: actions/checkout@v4 - - - name: Set Toolchain URL - run: echo >> $GITHUB_ENV TOOLCHAIN_URL=https://github.com/xpack-dev-tools/riscv-none-embed-gcc-xpack/releases/download/v10.1.0-1.1/xpack-riscv-none-embed-gcc-10.1.0-1.1-linux-x64.tar.gz - - - name: Cache Toolchain - uses: actions/cache@v4 - id: cache-toolchain - with: - path: ~/cache/ - key: ${{ runner.os }}-21-03-04-${{ env.TOOLCHAIN_URL }} - - - name: Install Toolchain - if: steps.cache-toolchain.outputs.cache-hit != 'true' - run: | - mkdir -p ~/cache/toolchain - wget --progress=dot:mega $TOOLCHAIN_URL -O toolchain.tar.gz - tar -C ~/cache/toolchain -xaf toolchain.tar.gz - - - name: Set Toolchain Path - run: echo >> $GITHUB_PATH `echo ~/cache/toolchain/*/bin` - - - name: Get Dependencies - run: python3 tools/get_deps.py ${{ matrix.family }} - - - name: Build - run: python3 tools/build_make.py ${{ matrix.family }} diff --git a/.github/workflows/build_win_mac.yml b/.github/workflows/build_win_mac.yml index b33b5b593..35328aa32 100644 --- a/.github/workflows/build_win_mac.yml +++ b/.github/workflows/build_win_mac.yml @@ -48,7 +48,9 @@ jobs: uses: actions/checkout@v4 - name: Get Dependencies - run: python3 tools/get_deps.py stm32f4 + run: | + pip install click + python3 tools/get_deps.py stm32f4 - name: Build - run: python3 tools/build_make.py stm32f4 stm32f411disco + run: python3 tools/build.py -s make stm32f2 diff --git a/.github/workflows/ci_set_matrix.py b/.github/workflows/ci_set_matrix.py new file mode 100644 index 000000000..2a17be6a1 --- /dev/null +++ b/.github/workflows/ci_set_matrix.py @@ -0,0 +1,51 @@ +import json + +# toolchain, url +toolchain_list = { + "aarch64-gcc": "https://developer.arm.com/-/media/Files/downloads/gnu-a/10.3-2021.07/binrel/gcc-arm-10.3-2021.07-x86_64-aarch64-none-elf.tar.xz", + "arm-clang": "https://github.com/ARM-software/LLVM-embedded-toolchain-for-Arm/releases/download/release-17.0.1/LLVMEmbeddedToolchainForArm-17.0.1-Linux-x86_64.tar.xz", + "arm-gcc": "", + "msp430-gcc": "http://software-dl.ti.com/msp430/msp430_public_sw/mcu/msp430/MSPGCC/9_2_0_0/export/msp430-gcc-9.2.0.50_linux64.tar.bz2", + "riscv-gcc": "https://github.com/xpack-dev-tools/riscv-none-embed-gcc-xpack/releases/download/v10.1.0-1.1/xpack-riscv-none-embed-gcc-10.1.0-1.1-linux-x64.tar.gz", +} + +# family: [supported toolchain] +family_list = { + "broadcom_32bit": ["arm-gcc"], + "broadcom_64bit": ["aarch64-gcc"], + "ch32v307 fomu gd32vf103": ["riscv-gcc"], + "imxrt": ["arm-gcc", "arm-clang"], + "kinetis_k kinetis_kl kinetis_k32l2": ["arm-gcc", "arm-clang"], + "lpc11 lpc13 lpc15": ["arm-gcc"], + "lpc17 lpc18 lpc40 lpc43": ["arm-gcc", "arm-clang"], + "lpc51 lpc54 lpc55": ["arm-gcc", "arm-clang"], + "mcx": ["arm-gcc"], + "mm32": ["arm-gcc"], + "msp430": ["msp430-gcc"], + "msp432e4 tm4c": ["arm-gcc"], + "nrf": ["arm-gcc", "arm-clang"], + "ra": ["arm-gcc"], + "rp2040": ["arm-gcc"], + "samd11 samd21 saml2x": ["arm-gcc", "arm-clang"], + "samd5x_e5x samg": ["arm-gcc", "arm-clang"], + "stm32f0 stm32f1 stm32f2 stm32f3": ["arm-gcc", "arm-clang"], + "stm32f4": ["arm-gcc", "arm-clang"], + "stm32f7": ["arm-gcc", "arm-clang"], + "stm32g0 stm32g4 stm32h5": ["arm-gcc", "arm-clang"], + "stm32h7": ["arm-gcc", "arm-clang"], + "stm32l4 stm32u5 stm32wb": ["arm-gcc", "arm-clang"], + "xmc4000": ["arm-gcc"], +} + + +def set_matrix_json(): + matrix = {} + for toolchain in toolchain_list.keys(): + filtered_families = [family for family, supported_toolchain in family_list.items() if + toolchain in supported_toolchain] + matrix[toolchain] = {"family": filtered_families, "toolchain_url": toolchain_list[toolchain]} + print(json.dumps(matrix)) + + +if __name__ == '__main__': + set_matrix_json() diff --git a/.github/workflows/cifuzz.yml b/.github/workflows/cifuzz.yml index 5dc0f2764..faa0f911c 100644 --- a/.github/workflows/cifuzz.yml +++ b/.github/workflows/cifuzz.yml @@ -12,6 +12,7 @@ on: - '**.h' jobs: Fuzzing: + if: false runs-on: ubuntu-latest steps: - name: Build Fuzzers @@ -20,12 +21,14 @@ jobs: with: oss-fuzz-project-name: 'tinyusb' language: c++ + - name: Run Fuzzers uses: google/oss-fuzz/infra/cifuzz/actions/run_fuzzers@master with: oss-fuzz-project-name: 'tinyusb' language: c++ fuzz-seconds: 600 + - name: Upload Crash uses: actions/upload-artifact@v4 if: failure() && steps.build.outcome == 'success' diff --git a/.github/workflows/codeql-buildscript.sh b/.github/workflows/codeql-buildscript.sh index 35e029922..272b55d22 100644 --- a/.github/workflows/codeql-buildscript.sh +++ b/.github/workflows/codeql-buildscript.sh @@ -1,5 +1,6 @@ #!/usr/bin/env bash FAMILY=stm32l4 +pip install click python3 tools/get_deps.py $FAMILY -python3 tools/build_make.py $FAMILY +python3 tools/build.py -s make $FAMILY diff --git a/.github/workflows/hil_test.yml b/.github/workflows/hil_test.yml new file mode 100644 index 000000000..024ab969d --- /dev/null +++ b/.github/workflows/hil_test.yml @@ -0,0 +1,125 @@ +name: Hardware Test + +on: + workflow_dispatch: + push: + paths: + - 'src/**' + - 'examples/**' + - 'lib/**' + - 'hw/**' + - 'test/hil/**' + - 'tools/get_deps.py' + - '.github/actions/**' + - '.github/workflows/hil_test.yml' + pull_request: + branches: [ master ] + paths: + - 'src/**' + - 'examples/**' + - 'lib/**' + - 'hw/**' + - 'test/hil/**' + - 'tools/get_deps.py' + - '.github/actions/**' + - '.github/workflows/hil_test.yml' +concurrency: + group: ${{ github.workflow }}-${{ github.head_ref || github.run_id }} + cancel-in-progress: true + +jobs: + build: + if: github.repository_owner == 'hathach' + runs-on: ubuntu-latest + outputs: + BOARD_LIST: ${{ steps.parse_hil_json.outputs.BOARD_LIST }} + steps: + - name: Checkout TinyUSB + uses: actions/checkout@v4 + + - name: Setup Python + uses: actions/setup-python@v5 + with: + python-version: '3.x' + + - name: Install ARM GCC + uses: carlosperate/arm-none-eabi-gcc-action@v1 + with: + release: '12.3.Rel1' + + - name: Parse HIL json + id: parse_hil_json + run: | + sudo apt install -y jq + BOARD_LIST=$(jq -r '.boards[] | "-b " + .name' test/hil/pi4.json | tr '\n' ' ') + echo "BOARD_LIST=$BOARD_LIST" + echo >> $GITHUB_ENV "BOARD_LIST=$BOARD_LIST" + echo >> $GITHUB_OUTPUT "BOARD_LIST=$BOARD_LIST" + + - name: Checkout pico-sdk for rp2040 + uses: actions/checkout@v4 + with: + repository: raspberrypi/pico-sdk + ref: develop + path: pico-sdk + + - name: Get Dependencies + run: | + pip install click + sudo apt install -y ninja-build + python3 tools/get_deps.py $BOARD_LIST + + - name: Build + run: | + python tools/build.py $BOARD_LIST + env: + PICO_SDK_PATH: ${{ github.workspace }}/pico-sdk + + - name: Upload Artifacts for Hardware Testing + uses: actions/upload-artifact@v4 + with: + name: hil_pi4 + path: | + cmake-build/cmake-build-*/*/*/*.elf + cmake-build/cmake-build-*/*/*/*.bin + + # --------------------------------------- + # Hardware in the loop (HIL) + # Current self-hosted instance is running on an RPI4. For attached hardware checkout hil_pi4.json + # --------------------------------------- + hil-pi4: + if: github.repository_owner == 'hathach' + needs: build + runs-on: [self-hosted, rp2040, nrf52840, hardware-in-the-loop] + env: + BOARD_LIST: ${{ needs.build.outputs.BOARD_LIST }} + steps: + - name: Clean workspace + run: | + echo "Cleaning up previous run" + rm -rf "${{ github.workspace }}" + mkdir -p "${{ github.workspace }}" + + # USB bus on rpi4 is not stable, reset it before testing + - name: Reset USB bus + run: | + lsusb + lsusb -t + # reset VIA Labs 2.0 hub + sudo usbreset 001/002 + + - name: Checkout TinyUSB + uses: actions/checkout@v4 + with: + sparse-checkout: test/hil + + - name: Download Artifacts + uses: actions/download-artifact@v4 + with: + name: hil_pi4 + path: cmake-build + + - name: Test on actual hardware + run: | + echo "BOARD_LIST=$BOARD_LIST" + python3 test/hil/hil_test.py $BOARD_LIST pi4.json diff --git a/.github/workflows/pre-commit.yml b/.github/workflows/pre-commit.yml index e36259daa..6b3151702 100644 --- a/.github/workflows/pre-commit.yml +++ b/.github/workflows/pre-commit.yml @@ -38,6 +38,7 @@ jobs: - name: Build Fuzzer run: | + pip install click export CC=clang export CXX=clang++ fuzz_harness=$(ls -d test/fuzz/device/*/) diff --git a/.idea/cmake.xml b/.idea/cmake.xml index 0e2ca61e4..bb13a0466 100644 --- a/.idea/cmake.xml +++ b/.idea/cmake.xml @@ -117,7 +117,7 @@ - + @@ -125,7 +125,11 @@ - + + + + + \ No newline at end of file diff --git a/examples/build_system/cmake/cpu/rv32i-ilp32.cmake b/examples/build_system/cmake/cpu/rv32i-ilp32.cmake new file mode 100644 index 000000000..b4889e6ff --- /dev/null +++ b/examples/build_system/cmake/cpu/rv32i-ilp32.cmake @@ -0,0 +1,19 @@ +if (TOOLCHAIN STREQUAL "gcc") + set(TOOLCHAIN_COMMON_FLAGS + -march=rv32i + -mabi=ilp32 + ) + set(FREERTOS_PORT GCC_RISC_V CACHE INTERNAL "") + +elseif (TOOLCHAIN STREQUAL "clang") + set(TOOLCHAIN_COMMON_FLAGS + -march=rv32i + -mabi=ilp32 + ) + set(FREERTOS_PORT GCC_RISC_V CACHE INTERNAL "") + +elseif (TOOLCHAIN STREQUAL "iar") + message(FATAL_ERROR "IAR not supported") + set(FREERTOS_PORT IAR_RISC_V CACHE INTERNAL "") + +endif () diff --git a/examples/build_system/cmake/cpu/rv32imac-ilp32.cmake b/examples/build_system/cmake/cpu/rv32imac-ilp32.cmake new file mode 100644 index 000000000..dd1bc0af7 --- /dev/null +++ b/examples/build_system/cmake/cpu/rv32imac-ilp32.cmake @@ -0,0 +1,18 @@ +if (TOOLCHAIN STREQUAL "gcc") + set(TOOLCHAIN_COMMON_FLAGS + -march=rv32imac + -mabi=ilp32 + ) + set(FREERTOS_PORT GCC_RISC_V CACHE INTERNAL "") + +elseif (TOOLCHAIN STREQUAL "clang") + set(TOOLCHAIN_COMMON_FLAGS + -march=rv32imac + -mabi=ilp32 + ) + set(FREERTOS_PORT GCC_RISC_V CACHE INTERNAL "") + +elseif (TOOLCHAIN STREQUAL "iar") + message(FATAL_ERROR "IAR not supported") + set(FREERTOS_PORT IAR_RISC_V CACHE INTERNAL "") +endif () diff --git a/examples/build_system/cmake/toolchain/riscv_gcc.cmake b/examples/build_system/cmake/toolchain/riscv_gcc.cmake new file mode 100644 index 000000000..904b27294 --- /dev/null +++ b/examples/build_system/cmake/toolchain/riscv_gcc.cmake @@ -0,0 +1,21 @@ +if (NOT DEFINED CMAKE_C_COMPILER) + set(CMAKE_C_COMPILER "riscv-none-embed-gcc") +endif () + +if (NOT DEFINED CMAKE_CXX_COMPILER) + set(CMAKE_CXX_COMPILER "riscv-none-embed-g++") +endif () + +set(CMAKE_ASM_COMPILER ${CMAKE_C_COMPILER}) +set(CMAKE_SIZE "riscv-none-embed-size" CACHE FILEPATH "") +set(CMAKE_OBJCOPY "riscv-none-embed-objcopy" CACHE FILEPATH "") +set(CMAKE_OBJDUMP "riscv-none-embed-objdump" CACHE FILEPATH "") + +include(${CMAKE_CURRENT_LIST_DIR}/common.cmake) + +get_property(IS_IN_TRY_COMPILE GLOBAL PROPERTY IN_TRY_COMPILE) +if (IS_IN_TRY_COMPILE) + set(CMAKE_C_LINK_FLAGS "${CMAKE_C_LINK_FLAGS} -nostdlib") + set(CMAKE_CXX_LINK_FLAGS "${CMAKE_CXX_LINK_FLAGS} -nostdlib") + cmake_print_variables(CMAKE_C_LINK_FLAGS) +endif () diff --git a/examples/build_system/make/cpu/rv32i-ilp32.mk b/examples/build_system/make/cpu/rv32i-ilp32.mk new file mode 100644 index 000000000..a465baf4c --- /dev/null +++ b/examples/build_system/make/cpu/rv32i-ilp32.mk @@ -0,0 +1,13 @@ +ifeq ($(TOOLCHAIN),gcc) + CFLAGS += \ + -march=rv32i \ + -mabi=ilp32 \ + +else ifeq ($(TOOLCHAIN),iar) + #CFLAGS += --cpu cortex-a53 + #ASFLAGS += --cpu cortex-a53 + +endif + +# For freeRTOS port source +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/RISC-V diff --git a/examples/build_system/make/cpu/rv32imac-ilp32.mk b/examples/build_system/make/cpu/rv32imac-ilp32.mk new file mode 100644 index 000000000..2b6493e48 --- /dev/null +++ b/examples/build_system/make/cpu/rv32imac-ilp32.mk @@ -0,0 +1,13 @@ +ifeq ($(TOOLCHAIN),gcc) + CFLAGS += \ + -march=rv32imac \ + -mabi=ilp32 \ + +else ifeq ($(TOOLCHAIN),iar) + #CFLAGS += --cpu cortex-a53 + #ASFLAGS += --cpu cortex-a53 + +endif + +# For freeRTOS port source +FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/RISC-V diff --git a/examples/build_system/make/toolchain/riscv_gcc.mk b/examples/build_system/make/toolchain/riscv_gcc.mk new file mode 100644 index 000000000..843aff38c --- /dev/null +++ b/examples/build_system/make/toolchain/riscv_gcc.mk @@ -0,0 +1,20 @@ +# makefile for arm gcc toolchain + +# Can be set by family, default to ARM GCC +CROSS_COMPILE ?= riscv-none-embed- + +CC = $(CROSS_COMPILE)gcc +CXX = $(CROSS_COMPILE)g++ +AS = $(CC) -x assembler-with-cpp +LD = $(CC) + +GDB = $(CROSS_COMPILE)gdb +OBJCOPY = $(CROSS_COMPILE)objcopy +SIZE = $(CROSS_COMPILE)size + +CFLAGS += \ + -fsingle-precision-constant \ + +LIBS += -lgcc -lm -lnosys + +include ${TOP}/examples/build_system/make/toolchain/gcc_common.mk diff --git a/examples/device/video_capture/skip.txt b/examples/device/video_capture/skip.txt index db64cc639..5898664a2 100644 --- a/examples/device/video_capture/skip.txt +++ b/examples/device/video_capture/skip.txt @@ -1,4 +1,3 @@ mcu:MSP430x5xx mcu:NUC121 mcu:SAMD11 -family:espressif diff --git a/hw/bsp/ch32v307/boards/ch32v307v_r1_1v0/board.cmake b/hw/bsp/ch32v307/boards/ch32v307v_r1_1v0/board.cmake new file mode 100644 index 000000000..9f5682042 --- /dev/null +++ b/hw/bsp/ch32v307/boards/ch32v307v_r1_1v0/board.cmake @@ -0,0 +1,4 @@ +function(update_board TARGET) +# target_compile_definitions(${TARGET} PUBLIC +# ) +endfunction() diff --git a/hw/bsp/ch32v307/boards/ch32v307v_r1_1v0/debug_uart.c b/hw/bsp/ch32v307/boards/ch32v307v_r1_1v0/debug_uart.c deleted file mode 100644 index db3551ca7..000000000 --- a/hw/bsp/ch32v307/boards/ch32v307v_r1_1v0/debug_uart.c +++ /dev/null @@ -1,110 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2022 Greg Davill - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "debug_uart.h" -#include - - -#define UART_RINGBUFFER_SIZE_TX 64 -#define UART_RINGBUFFER_MASK_TX (UART_RINGBUFFER_SIZE_TX-1) - -static char tx_buf[UART_RINGBUFFER_SIZE_TX]; -static unsigned int tx_produce; -static volatile unsigned int tx_consume; - -void USART1_IRQHandler(void) __attribute__((naked)); -void USART1_IRQHandler(void) { - __asm volatile ("call USART1_IRQHandler_impl; mret"); -} - -__attribute__((used)) void USART1_IRQHandler_impl(void) -{ - if(USART_GetITStatus(USART1, USART_IT_TC) != RESET) - { - USART_ClearITPendingBit(USART1, USART_IT_TC); - - if(tx_consume != tx_produce) { - USART_SendData(USART1, tx_buf[tx_consume]); - tx_consume = (tx_consume + 1) & UART_RINGBUFFER_MASK_TX; - } - } - -} - -void uart_write(char c) -{ - unsigned int tx_produce_next = (tx_produce + 1) & UART_RINGBUFFER_MASK_TX; - - NVIC_DisableIRQ(USART1_IRQn); - if((tx_consume != tx_produce) || (USART_GetFlagStatus(USART1, USART_FLAG_TXE) == RESET)) { - tx_buf[tx_produce] = c; - tx_produce = tx_produce_next; - } else { - USART_SendData(USART1, c); - } - NVIC_EnableIRQ(USART1_IRQn); -} - - -void uart_sync(void) -{ - while(tx_consume != tx_produce); -} - - -void usart_printf_init(uint32_t baudrate) -{ - GPIO_InitTypeDef GPIO_InitStructure; - USART_InitTypeDef USART_InitStructure; - - tx_produce = 0; - tx_consume = 0; - - RCC_APB2PeriphClockCmd(RCC_APB2Periph_USART1 | RCC_APB2Periph_GPIOA, ENABLE); - - GPIO_InitStructure.GPIO_Pin = GPIO_Pin_9; - GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; - GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP; - GPIO_Init(GPIOA, &GPIO_InitStructure); - - USART_InitStructure.USART_BaudRate = baudrate; - USART_InitStructure.USART_WordLength = USART_WordLength_8b; - USART_InitStructure.USART_StopBits = USART_StopBits_1; - USART_InitStructure.USART_Parity = USART_Parity_No; - USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None; - USART_InitStructure.USART_Mode = USART_Mode_Tx; - - USART_Init(USART1, &USART_InitStructure); - USART_ITConfig(USART1, USART_IT_TC, ENABLE); - USART_Cmd(USART1, ENABLE); - - NVIC_InitTypeDef NVIC_InitStructure = { 0 }; - NVIC_InitStructure.NVIC_IRQChannel = USART1_IRQn; - NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 1; - NVIC_InitStructure.NVIC_IRQChannelSubPriority = 3; - NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; - NVIC_Init(&NVIC_InitStructure); -} diff --git a/hw/bsp/ch32v307/boards/ch32v307v_r1_1v0/debug_uart.h b/hw/bsp/ch32v307/boards/ch32v307v_r1_1v0/debug_uart.h deleted file mode 100644 index a7e070585..000000000 --- a/hw/bsp/ch32v307/boards/ch32v307v_r1_1v0/debug_uart.h +++ /dev/null @@ -1,31 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2022 Greg Davill - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include - -void uart_write(char c); -void uart_sync(void); -void usart_printf_init(uint32_t baudrate); diff --git a/hw/bsp/ch32v307/debug_uart.c b/hw/bsp/ch32v307/debug_uart.c new file mode 100644 index 000000000..db3551ca7 --- /dev/null +++ b/hw/bsp/ch32v307/debug_uart.c @@ -0,0 +1,110 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2022 Greg Davill + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "debug_uart.h" +#include + + +#define UART_RINGBUFFER_SIZE_TX 64 +#define UART_RINGBUFFER_MASK_TX (UART_RINGBUFFER_SIZE_TX-1) + +static char tx_buf[UART_RINGBUFFER_SIZE_TX]; +static unsigned int tx_produce; +static volatile unsigned int tx_consume; + +void USART1_IRQHandler(void) __attribute__((naked)); +void USART1_IRQHandler(void) { + __asm volatile ("call USART1_IRQHandler_impl; mret"); +} + +__attribute__((used)) void USART1_IRQHandler_impl(void) +{ + if(USART_GetITStatus(USART1, USART_IT_TC) != RESET) + { + USART_ClearITPendingBit(USART1, USART_IT_TC); + + if(tx_consume != tx_produce) { + USART_SendData(USART1, tx_buf[tx_consume]); + tx_consume = (tx_consume + 1) & UART_RINGBUFFER_MASK_TX; + } + } + +} + +void uart_write(char c) +{ + unsigned int tx_produce_next = (tx_produce + 1) & UART_RINGBUFFER_MASK_TX; + + NVIC_DisableIRQ(USART1_IRQn); + if((tx_consume != tx_produce) || (USART_GetFlagStatus(USART1, USART_FLAG_TXE) == RESET)) { + tx_buf[tx_produce] = c; + tx_produce = tx_produce_next; + } else { + USART_SendData(USART1, c); + } + NVIC_EnableIRQ(USART1_IRQn); +} + + +void uart_sync(void) +{ + while(tx_consume != tx_produce); +} + + +void usart_printf_init(uint32_t baudrate) +{ + GPIO_InitTypeDef GPIO_InitStructure; + USART_InitTypeDef USART_InitStructure; + + tx_produce = 0; + tx_consume = 0; + + RCC_APB2PeriphClockCmd(RCC_APB2Periph_USART1 | RCC_APB2Periph_GPIOA, ENABLE); + + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_9; + GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP; + GPIO_Init(GPIOA, &GPIO_InitStructure); + + USART_InitStructure.USART_BaudRate = baudrate; + USART_InitStructure.USART_WordLength = USART_WordLength_8b; + USART_InitStructure.USART_StopBits = USART_StopBits_1; + USART_InitStructure.USART_Parity = USART_Parity_No; + USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None; + USART_InitStructure.USART_Mode = USART_Mode_Tx; + + USART_Init(USART1, &USART_InitStructure); + USART_ITConfig(USART1, USART_IT_TC, ENABLE); + USART_Cmd(USART1, ENABLE); + + NVIC_InitTypeDef NVIC_InitStructure = { 0 }; + NVIC_InitStructure.NVIC_IRQChannel = USART1_IRQn; + NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 1; + NVIC_InitStructure.NVIC_IRQChannelSubPriority = 3; + NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; + NVIC_Init(&NVIC_InitStructure); +} diff --git a/hw/bsp/ch32v307/debug_uart.h b/hw/bsp/ch32v307/debug_uart.h new file mode 100644 index 000000000..a7e070585 --- /dev/null +++ b/hw/bsp/ch32v307/debug_uart.h @@ -0,0 +1,31 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2022 Greg Davill + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include + +void uart_write(char c); +void uart_sync(void); +void usart_printf_init(uint32_t baudrate); diff --git a/hw/bsp/ch32v307/family.cmake b/hw/bsp/ch32v307/family.cmake new file mode 100644 index 000000000..87a0f2eba --- /dev/null +++ b/hw/bsp/ch32v307/family.cmake @@ -0,0 +1,114 @@ +include_guard() + +set(SDK_DIR ${TOP}/hw/mcu/wch/ch32v307/EVT/EXAM/SRC) + +# include board specific +include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) + +# toolchain set up +set(CMAKE_SYSTEM_PROCESSOR rv32imac-ilp32 CACHE INTERNAL "System Processor") +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/riscv_${TOOLCHAIN}.cmake) + +set(FAMILY_MCUS CH32V307 CACHE INTERNAL "") +set(OPENOCD_OPTION "-f ${CMAKE_CURRENT_LIST_DIR}/wch-riscv.cfg") +set(OPENOCD_OPTION2 "-c wlink_reset_resume") + +#------------------------------------ +# BOARD_TARGET +#------------------------------------ +# only need to be built ONCE for all examples +function(add_board_target BOARD_TARGET) + if (TARGET ${BOARD_TARGET}) + return() + endif() + + if (NOT DEFINED LD_FILE_GNU) + set(LD_FILE_GNU ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/ch32v307.ld) + endif () + set(LD_FILE_Clang ${LD_FILE_GNU}) + + if (NOT DEFINED STARTUP_FILE_GNU) + set(STARTUP_FILE_GNU ${SDK_DIR}/Startup/startup_ch32v30x_D8C.S) + endif () + set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) + + add_library(${BOARD_TARGET} STATIC + ${SDK_DIR}/Core/core_riscv.c + ${SDK_DIR}/Peripheral/src/ch32v30x_gpio.c + ${SDK_DIR}/Peripheral/src/ch32v30x_misc.c + ${SDK_DIR}/Peripheral/src/ch32v30x_rcc.c + ${SDK_DIR}/Peripheral/src/ch32v30x_usart.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/ch32v30x_it.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/system_ch32v30x.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} + ) + target_include_directories(${BOARD_TARGET} PUBLIC + ${SDK_DIR}/Peripheral/inc + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ) + target_compile_definitions(${BOARD_TARGET} PUBLIC + BOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED + ) + + update_board(${BOARD_TARGET}) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_compile_options(${BOARD_TARGET} PUBLIC + -msmall-data-limit=8 + -mno-save-restore + -fmessage-length=0 + -fsigned-char + ) + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -nostartfiles + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + message(FATAL_ERROR "Clang is not supported for MSP432E4") + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () +endfunction() + + +#------------------------------------ +# Functions +#------------------------------------ +function(family_configure_example TARGET RTOS) + family_configure_common(${TARGET} ${RTOS}) + + # Board target + add_board_target(board_${BOARD}) + + #---------- Port Specific ---------- + # These files are built for each example since it depends on example's tusb_config.h + target_sources(${TARGET} PUBLIC + # BSP + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/debug_uart.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ) + target_include_directories(${TARGET} PUBLIC + # family, hw, board + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} + ) + + # Add TinyUSB target and port source + family_add_tinyusb(${TARGET} OPT_MCU_CH32V307 ${RTOS}) + target_sources(${TARGET}-tinyusb PUBLIC + ${TOP}/src/portable/wch/dcd_ch32_usbhs.c + ) + target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + + # Link dependencies + target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) + + # Flashing + family_add_bin_hex(${TARGET}) + family_flash_openocd_wch(${TARGET}) +endfunction() diff --git a/hw/bsp/ch32v307/family.mk b/hw/bsp/ch32v307/family.mk index 07e57f04c..003b90539 100644 --- a/hw/bsp/ch32v307/family.mk +++ b/hw/bsp/ch32v307/family.mk @@ -6,29 +6,28 @@ CROSS_COMPILE ?= riscv-none-embed- # Submodules CH32V307_SDK = hw/mcu/wch/ch32v307 -DEPS_SUBMODULES += $(CH32V307_SDK) # WCH-SDK paths CH32V307_SDK_SRC = $(CH32V307_SDK)/EVT/EXAM/SRC include $(TOP)/$(BOARD_PATH)/board.mk +CPU_CORE ?= rv32imac-ilp32 CFLAGS += \ -flto \ - -march=rv32imac \ - -mabi=ilp32 \ -msmall-data-limit=8 \ -mno-save-restore -Os \ -fmessage-length=0 \ -fsigned-char \ -ffunction-sections \ -fdata-sections \ - -nostdlib -nostartfiles \ -DCFG_TUSB_MCU=OPT_MCU_CH32V307 \ -Xlinker --gc-sections \ -DBOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED -LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs +LDFLAGS_GCC += \ + -nostdlib -nostartfiles \ + --specs=nosys.specs --specs=nano.specs SRC_C += \ src/portable/wch/dcd_ch32_usbhs.c \ @@ -62,5 +61,6 @@ FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/RISC-V # openocd binaries will be generated in riscv-openocd-wch/src # flash target ROM bootloader +OPENOCD_WCH = /home/${USER}/app/riscv-openocd-wch/src/openocd flash: $(BUILD)/$(PROJECT).elf - openocd -f $(TOP)/$(FAMILY_PATH)/wch-riscv.cfg -c init -c halt -c "program $<" -c wlink_reset_resume -c exit + $(OPENOCD_WCH) -f $(TOP)/$(FAMILY_PATH)/wch-riscv.cfg -c init -c halt -c "program $<" -c wlink_reset_resume -c exit diff --git a/hw/bsp/espressif/components/led_strip/examples/led_strip_rmt_ws2812/dependencies.lock b/hw/bsp/espressif/components/led_strip/examples/led_strip_rmt_ws2812/dependencies.lock deleted file mode 100644 index 97840a153..000000000 --- a/hw/bsp/espressif/components/led_strip/examples/led_strip_rmt_ws2812/dependencies.lock +++ /dev/null @@ -1,15 +0,0 @@ -dependencies: - espressif/led_strip: - component_hash: null - source: - path: /home/hathach/code/idf-extra-components/led_strip - type: local - version: 2.5.2 - idf: - component_hash: null - source: - type: idf - version: 5.1.1 -manifest_hash: 47d47762be26168b388cb0e6cbfee6b22c68d630ebf4b27a49c47c4c54191590 -target: esp32s3 -version: 1.0.0 diff --git a/hw/bsp/family_support.cmake b/hw/bsp/family_support.cmake index bac1ecb5f..df4f616ef 100644 --- a/hw/bsp/family_support.cmake +++ b/hw/bsp/family_support.cmake @@ -385,6 +385,10 @@ function(family_flash_jlink TARGET) set(JLINKEXE JLinkExe) endif () + if (NOT DEFINED JLINK_IF) + set(JLINK_IF swd) + endif () + file(GENERATE OUTPUT $/${TARGET}.jlink CONTENT "halt @@ -396,7 +400,7 @@ exit" add_custom_target(${TARGET}-jlink DEPENDS ${TARGET} - COMMAND ${JLINKEXE} -device ${JLINK_DEVICE} -if swd -JTAGConf -1,-1 -speed auto -CommandFile $/${TARGET}.jlink + COMMAND ${JLINKEXE} -device ${JLINK_DEVICE} -if ${JLINK_IF} -JTAGConf -1,-1 -speed auto -CommandFile $/${TARGET}.jlink ) endfunction() @@ -420,16 +424,30 @@ function(family_flash_openocd TARGET) set(OPENOCD openocd) endif () - separate_arguments(OPENOCD_OPTION_LIST UNIX_COMMAND ${OPENOCD_OPTION}) + if (NOT DEFINED OPENOCD_OPTION2) + set(OPENOCD_OPTION2 "") + endif () + + separate_arguments(OPTION_LIST UNIX_COMMAND ${OPENOCD_OPTION}) + separate_arguments(OPTION_LIST2 UNIX_COMMAND ${OPENOCD_OPTION2}) # note skip verify since it has issue with rp2040 add_custom_target(${TARGET}-openocd DEPENDS ${TARGET} - COMMAND ${OPENOCD} ${OPENOCD_OPTION_LIST} -c "program $ reset exit" + COMMAND ${OPENOCD} ${OPTION_LIST} -c "program $ reset" ${OPTION_LIST2} -c exit VERBATIM ) endfunction() +# Add flash openocd-wch target +function(family_flash_openocd_wch TARGET) + if (NOT DEFINED OPENOCD) + set(OPENOCD $ENV{HOME}/app/riscv-openocd-wch/src/openocd) + endif () + + family_flash_openocd(${TARGET}) +endfunction() + # Add flash pycod target function(family_flash_pyocd TARGET) if (NOT DEFINED PYOC) diff --git a/hw/bsp/fomu/boards/fomu/board.cmake b/hw/bsp/fomu/boards/fomu/board.cmake new file mode 100644 index 000000000..9f5682042 --- /dev/null +++ b/hw/bsp/fomu/boards/fomu/board.cmake @@ -0,0 +1,4 @@ +function(update_board TARGET) +# target_compile_definitions(${TARGET} PUBLIC +# ) +endfunction() diff --git a/hw/bsp/fomu/family.c b/hw/bsp/fomu/family.c new file mode 100644 index 000000000..ccf2b12f4 --- /dev/null +++ b/hw/bsp/fomu/family.c @@ -0,0 +1,121 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include +#include +#include "csr.h" +#include "irq.h" + +#include "bsp/board_api.h" + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void fomu_error(uint32_t line) +{ + (void)line; + TU_BREAKPOINT(); +} + +volatile uint32_t system_ticks = 0; +static void timer_init(void) +{ + int t; + + timer0_en_write(0); + t = CONFIG_CLOCK_FREQUENCY / 1000; // 1000 kHz tick + timer0_reload_write(t); + timer0_load_write(t); + timer0_en_write(1); + timer0_ev_enable_write(1); + timer0_ev_pending_write(1); + irq_setmask(irq_getmask() | (1 << TIMER0_INTERRUPT)); +} + +void isr(void) +{ + unsigned int irqs; + + irqs = irq_pending() & irq_getmask(); + +#if CFG_TUD_ENABLED + if (irqs & (1 << USB_INTERRUPT)) { + tud_int_handler(0); + } +#endif + if (irqs & (1 << TIMER0_INTERRUPT)) { + system_ticks++; + timer0_ev_pending_write(1); + } +} + +void board_init(void) +{ + irq_setmask(0); + irq_setie(1); + timer_init(); + return; +} + +void board_led_write(bool state) +{ + rgb_ctrl_write(0xff); + rgb_raw_write(state); +} + +uint32_t board_button_read(void) +{ + return 0; +} + +int board_uart_read(uint8_t* buf, int len) +{ + (void) buf; + (void) len; + return 0; +} + +int board_uart_write(void const * buf, int len) +{ + int32_t offset = 0; + uint8_t const* buf8 = (uint8_t const*) buf; + for (offset = 0; offset < len; offset++) + { + if (!(messible_status_read() & CSR_MESSIBLE_STATUS_FULL_OFFSET)) + { + messible_in_write(buf8[offset]); + } + } + return len; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif diff --git a/hw/bsp/fomu/family.cmake b/hw/bsp/fomu/family.cmake new file mode 100644 index 000000000..8d5ab144c --- /dev/null +++ b/hw/bsp/fomu/family.cmake @@ -0,0 +1,91 @@ +include_guard() + +# include board specific +include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) + +# toolchain set up +set(CMAKE_SYSTEM_PROCESSOR rv32i-ilp32 CACHE INTERNAL "System Processor") +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/riscv_${TOOLCHAIN}.cmake) + +set(FAMILY_MCUS VALENTYUSB_EPTRI CACHE INTERNAL "") + +#------------------------------------ +# BOARD_TARGET +#------------------------------------ +# only need to be built ONCE for all examples +function(add_board_target BOARD_TARGET) + if (TARGET ${BOARD_TARGET}) + return() + endif() + + if (NOT DEFINED LD_FILE_GNU) + set(LD_FILE_GNU ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/fomu.ld) + endif () + set(LD_FILE_Clang ${LD_FILE_GNU}) + + if (NOT DEFINED STARTUP_FILE_GNU) + set(STARTUP_FILE_GNU ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/crt0-vexriscv.S) + endif () + set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) + + add_library(${BOARD_TARGET} STATIC + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} + ) + target_include_directories(${BOARD_TARGET} PUBLIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/include + ) + + update_board(${BOARD_TARGET}) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -nostartfiles + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + message(FATAL_ERROR "Clang is not supported for MSP432E4") + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () +endfunction() + + +#------------------------------------ +# Functions +#------------------------------------ +function(family_configure_example TARGET RTOS) + family_configure_common(${TARGET} ${RTOS}) + + # Board target + add_board_target(board_${BOARD}) + + #---------- Port Specific ---------- + # These files are built for each example since it depends on example's tusb_config.h + target_sources(${TARGET} PUBLIC + # BSP + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ) + target_include_directories(${TARGET} PUBLIC + # family, hw, board + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} + ) + + # Add TinyUSB target and port source + family_add_tinyusb(${TARGET} OPT_MCU_VALENTYUSB_EPTRI ${RTOS}) + target_sources(${TARGET}-tinyusb PUBLIC + ${TOP}/src/portable/valentyusb/eptri/dcd_eptri.c + ) + target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + + # Link dependencies + target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) + + # Flashing + family_add_bin_hex(${TARGET}) +endfunction() diff --git a/hw/bsp/fomu/family.mk b/hw/bsp/fomu/family.mk index f8a3c9ebf..d4b6eaea6 100644 --- a/hw/bsp/fomu/family.mk +++ b/hw/bsp/fomu/family.mk @@ -1,14 +1,15 @@ # Toolchain from https://github.com/xpack-dev-tools/riscv-none-embed-gcc-xpack CROSS_COMPILE = riscv-none-embed- +CPU_CORE ?= rv32i-ilp32 + CFLAGS += \ -flto \ - -march=rv32i \ - -mabi=ilp32 \ - -nostdlib \ -DCFG_TUSB_MCU=OPT_MCU_VALENTYUSB_EPTRI -LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs +LDFLAGS_GCC += \ + -nostdlib \ + --specs=nosys.specs --specs=nano.specs \ # All source paths should be relative to the top level. LD_FILE = $(FAMILY_PATH)/fomu.ld diff --git a/hw/bsp/fomu/fomu.c b/hw/bsp/fomu/fomu.c deleted file mode 100644 index d155b743d..000000000 --- a/hw/bsp/fomu/fomu.c +++ /dev/null @@ -1,120 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include -#include -#include "../board_api.h" -#include "csr.h" -#include "irq.h" - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void fomu_error(uint32_t line) -{ - (void)line; - TU_BREAKPOINT(); -} - -volatile uint32_t system_ticks = 0; -static void timer_init(void) -{ - int t; - - timer0_en_write(0); - t = CONFIG_CLOCK_FREQUENCY / 1000; // 1000 kHz tick - timer0_reload_write(t); - timer0_load_write(t); - timer0_en_write(1); - timer0_ev_enable_write(1); - timer0_ev_pending_write(1); - irq_setmask(irq_getmask() | (1 << TIMER0_INTERRUPT)); -} - -void isr(void) -{ - unsigned int irqs; - - irqs = irq_pending() & irq_getmask(); - -#if CFG_TUD_ENABLED - if (irqs & (1 << USB_INTERRUPT)) { - tud_int_handler(0); - } -#endif - if (irqs & (1 << TIMER0_INTERRUPT)) { - system_ticks++; - timer0_ev_pending_write(1); - } -} - -void board_init(void) -{ - irq_setmask(0); - irq_setie(1); - timer_init(); - return; -} - -void board_led_write(bool state) -{ - rgb_ctrl_write(0xff); - rgb_raw_write(state); -} - -uint32_t board_button_read(void) -{ - return 0; -} - -int board_uart_read(uint8_t* buf, int len) -{ - (void) buf; - (void) len; - return 0; -} - -int board_uart_write(void const * buf, int len) -{ - int32_t offset = 0; - uint8_t const* buf8 = (uint8_t const*) buf; - for (offset = 0; offset < len; offset++) - { - if (!(messible_status_read() & CSR_MESSIBLE_STATUS_FULL_OFFSET)) - { - messible_in_write(buf8[offset]); - } - } - return len; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif diff --git a/hw/bsp/gd32vf103/boards/sipeed_longan_nano/board.cmake b/hw/bsp/gd32vf103/boards/sipeed_longan_nano/board.cmake new file mode 100644 index 000000000..403ac08cf --- /dev/null +++ b/hw/bsp/gd32vf103/boards/sipeed_longan_nano/board.cmake @@ -0,0 +1,13 @@ +set(JLINK_DEVICE gd32vf103cbt6) + +set(SDK_BSP_DIR ${SOC_DIR}/Board/gd32vf103c_longan_nano) +set(LD_FILE_GNU ${SDK_BSP_DIR}/Source/GCC/gcc_gd32vf103xb_flashxip.ld) + +function(update_board TARGET) + target_sources(${TARGET} PUBLIC + ${SDK_BSP_DIR}/Source/gd32vf103c_longan_nano.c + ) + target_include_directories(${TARGET} PUBLIC + ${SDK_BSP_DIR}/Include + ) +endfunction() diff --git a/hw/bsp/gd32vf103/boards/sipeed_longan_nano/board.mk b/hw/bsp/gd32vf103/boards/sipeed_longan_nano/board.mk index 3b8944452..fc49b7317 100644 --- a/hw/bsp/gd32vf103/boards/sipeed_longan_nano/board.mk +++ b/hw/bsp/gd32vf103/boards/sipeed_longan_nano/board.mk @@ -10,4 +10,3 @@ INC += $(TOP)/$(LONGAN_NANO_SDK_BSP)/Include # Longan Nano 128k ROM 32k RAM JLINK_DEVICE = gd32vf103cbt6 -#JLINK_DEVICE = gd32vf103c8t6 # Longan Nano Lite 64k ROM 20k RAM diff --git a/hw/bsp/gd32vf103/family.c b/hw/bsp/gd32vf103/family.c index 27d7e87bb..d4a819fb3 100644 --- a/hw/bsp/gd32vf103/family.c +++ b/hw/bsp/gd32vf103/family.c @@ -24,11 +24,11 @@ * This file is part of the TinyUSB stack. */ -#include "board.h" #include "drv_usb_hw.h" #include "drv_usb_dev.h" -#include "../board_api.h" +#include "bsp/board_api.h" +#include "board.h" //--------------------------------------------------------------------+ // Forward USB interrupt events to TinyUSB IRQ Handler diff --git a/hw/bsp/gd32vf103/family.cmake b/hw/bsp/gd32vf103/family.cmake new file mode 100644 index 000000000..5f4a3da8d --- /dev/null +++ b/hw/bsp/gd32vf103/family.cmake @@ -0,0 +1,119 @@ +include_guard() + +set(SDK_DIR ${TOP}/hw/mcu/gd/nuclei-sdk) +set(SOC_DIR ${SDK_DIR}/SoC/gd32vf103) + +# include board specific +include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) + +# toolchain set up +set(CMAKE_SYSTEM_PROCESSOR rv32imac-ilp32 CACHE INTERNAL "System Processor") +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/riscv_${TOOLCHAIN}.cmake) + +set(FAMILY_MCUS GD32VF103 CACHE INTERNAL "") + +set(JLINK_IF jtag) + +#------------------------------------ +# BOARD_TARGET +#------------------------------------ +# only need to be built ONCE for all examples +function(add_board_target BOARD_TARGET) + if (TARGET ${BOARD_TARGET}) + return() + endif() + + if (NOT DEFINED LD_FILE_GNU) + message(FATAL_ERROR "LD_FILE_GNU is not defined") + endif () + set(LD_FILE_Clang ${LD_FILE_GNU}) + + if (NOT DEFINED STARTUP_FILE_GNU) + set(STARTUP_FILE_GNU + ${SOC_DIR}/Common/Source/GCC/startup_gd32vf103.S + ${SOC_DIR}/Common/Source/GCC/intexc_gd32vf103.S + ) + endif () + set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) + + add_library(${BOARD_TARGET} STATIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/system_gd32vf103.c + ${SOC_DIR}/Common/Source/Drivers/gd32vf103_rcu.c + ${SOC_DIR}/Common/Source/Drivers/gd32vf103_gpio.c + ${SOC_DIR}/Common/Source/Drivers/Usb/gd32vf103_usb_hw.c + ${SOC_DIR}/Common/Source/Drivers/gd32vf103_usart.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} + ) + target_include_directories(${BOARD_TARGET} PUBLIC + ${SDK_DIR}/NMSIS/Core/Include + ${SOC_DIR}/Common/Include + ${SOC_DIR}/Common/Include/Usb + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} + ) + target_compile_definitions(${BOARD_TARGET} PUBLIC + DOWNLOAD_MODE=DOWNLOAD_MODE_FLASHXIP + ) + + update_board(${BOARD_TARGET}) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_compile_options(${BOARD_TARGET} PUBLIC + -mcmodel=medlow + -mstrict-align + ) + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -nostartfiles + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + message(FATAL_ERROR "Clang is not supported for MSP432E4") + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () +endfunction() + + +#------------------------------------ +# Functions +#------------------------------------ +function(family_configure_example TARGET RTOS) + family_configure_common(${TARGET} ${RTOS}) + + # Board target + add_board_target(board_${BOARD}) + + #---------- Port Specific ---------- + # These files are built for each example since it depends on example's tusb_config.h + target_sources(${TARGET} PUBLIC + # BSP + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ${SOC_DIR}/Common/Source/Stubs/sbrk.c + ${SOC_DIR}/Common/Source/Stubs/close.c + ${SOC_DIR}/Common/Source/Stubs/isatty.c + ${SOC_DIR}/Common/Source/Stubs/fstat.c + ${SOC_DIR}/Common/Source/Stubs/lseek.c + ${SOC_DIR}/Common/Source/Stubs/read.c + ) + target_include_directories(${TARGET} PUBLIC + # family, hw, board + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} + ) + + # Add TinyUSB target and port source + family_add_tinyusb(${TARGET} OPT_MCU_GD32VF103 ${RTOS}) + target_sources(${TARGET}-tinyusb PUBLIC + ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c + ) + target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + + # Link dependencies + target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) + + # Flashing + family_flash_jlink(${TARGET}) +endfunction() diff --git a/hw/bsp/gd32vf103/family.mk b/hw/bsp/gd32vf103/family.mk index 1725559c4..28e48a6b5 100644 --- a/hw/bsp/gd32vf103/family.mk +++ b/hw/bsp/gd32vf103/family.mk @@ -9,7 +9,6 @@ CROSS_COMPILE ?= riscv-none-embed- # Submodules NUCLEI_SDK = hw/mcu/gd/nuclei-sdk -DEPS_SUBMODULES += $(NUCLEI_SDK) # Nuclei-SDK paths GD32VF103_SDK_SOC = $(NUCLEI_SDK)/SoC/gd32vf103 @@ -18,12 +17,9 @@ LIBC_STUBS = $(GD32VF103_SDK_SOC)/Common/Source/Stubs STARTUP_ASM = $(GD32VF103_SDK_SOC)/Common/Source/GCC include $(TOP)/$(BOARD_PATH)/board.mk - -SKIP_NANOLIB = 1 +CPU_CORE ?= rv32imac-ilp32 CFLAGS += \ - -march=rv32imac \ - -mabi=ilp32 \ -mcmodel=medlow \ -mstrict-align \ -nostdlib -nostartfiles \ @@ -35,10 +31,10 @@ CFLAGS += -Wno-error=unused-parameter SRC_C += \ src/portable/synopsys/dwc2/dcd_dwc2.c \ - $(GD32VF103_SDK_DRIVER)/gd32vf103_rcu.c \ $(GD32VF103_SDK_DRIVER)/gd32vf103_gpio.c \ - $(GD32VF103_SDK_DRIVER)/Usb/gd32vf103_usb_hw.c \ + $(GD32VF103_SDK_DRIVER)/gd32vf103_rcu.c \ $(GD32VF103_SDK_DRIVER)/gd32vf103_usart.c \ + $(GD32VF103_SDK_DRIVER)/Usb/gd32vf103_usb_hw.c \ $(LIBC_STUBS)/sbrk.c \ $(LIBC_STUBS)/close.c \ $(LIBC_STUBS)/isatty.c \ diff --git a/hw/bsp/lpc51/family.cmake b/hw/bsp/lpc51/family.cmake index dd0ef6d1b..b9dd8829e 100644 --- a/hw/bsp/lpc51/family.cmake +++ b/hw/bsp/lpc51/family.cmake @@ -34,7 +34,6 @@ function(add_board_target BOARD_TARGET) add_library(${BOARD_TARGET} STATIC ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} # driver - ${SDK_DIR}/drivers/common/fsl_common_arm.c ${SDK_DIR}/drivers/lpc_gpio/fsl_gpio.c ${SDK_DIR}/drivers/flexcomm/fsl_flexcomm.c ${SDK_DIR}/drivers/flexcomm/fsl_usart.c diff --git a/src/device/usbd.c b/src/device/usbd.c index e51aa0fc4..6aeaa699f 100644 --- a/src/device/usbd.c +++ b/src/device/usbd.c @@ -90,16 +90,16 @@ tu_static usbd_device_t _usbd_dev; // Class Driver //--------------------------------------------------------------------+ #if CFG_TUSB_DEBUG >= CFG_TUD_LOG_LEVEL - #define DRIVER_NAME(_name) .name = _name, + #define DRIVER_NAME(_name) _name #else - #define DRIVER_NAME(_name) + #define DRIVER_NAME(_name) NULL #endif // Built-in class drivers tu_static usbd_class_driver_t const _usbd_driver[] = { #if CFG_TUD_CDC { - DRIVER_NAME("CDC") + .name = DRIVER_NAME("CDC"), .init = cdcd_init, .deinit = cdcd_deinit, .reset = cdcd_reset, @@ -112,7 +112,7 @@ tu_static usbd_class_driver_t const _usbd_driver[] = { #if CFG_TUD_MSC { - DRIVER_NAME("MSC") + .name = DRIVER_NAME("MSC"), .init = mscd_init, .deinit = NULL, .reset = mscd_reset, @@ -125,7 +125,7 @@ tu_static usbd_class_driver_t const _usbd_driver[] = { #if CFG_TUD_HID { - DRIVER_NAME("HID") + .name = DRIVER_NAME("HID"), .init = hidd_init, .deinit = hidd_deinit, .reset = hidd_reset, @@ -138,7 +138,7 @@ tu_static usbd_class_driver_t const _usbd_driver[] = { #if CFG_TUD_AUDIO { - DRIVER_NAME("AUDIO") + .name = DRIVER_NAME("AUDIO"), .init = audiod_init, .deinit = audiod_deinit, .reset = audiod_reset, @@ -151,7 +151,7 @@ tu_static usbd_class_driver_t const _usbd_driver[] = { #if CFG_TUD_VIDEO { - DRIVER_NAME("VIDEO") + .name = DRIVER_NAME("VIDEO"), .init = videod_init, .deinit = videod_deinit, .reset = videod_reset, @@ -164,7 +164,7 @@ tu_static usbd_class_driver_t const _usbd_driver[] = { #if CFG_TUD_MIDI { - DRIVER_NAME("MIDI") + .name = DRIVER_NAME("MIDI"), .init = midid_init, .deinit = midid_deinit, .open = midid_open, @@ -177,7 +177,7 @@ tu_static usbd_class_driver_t const _usbd_driver[] = { #if CFG_TUD_VENDOR { - DRIVER_NAME("VENDOR") + .name = DRIVER_NAME("VENDOR"), .init = vendord_init, .deinit = vendord_deinit, .reset = vendord_reset, @@ -190,7 +190,7 @@ tu_static usbd_class_driver_t const _usbd_driver[] = { #if CFG_TUD_USBTMC { - DRIVER_NAME("TMC") + .name = DRIVER_NAME("TMC"), .init = usbtmcd_init_cb, .deinit = usbtmcd_deinit, .reset = usbtmcd_reset_cb, @@ -203,7 +203,7 @@ tu_static usbd_class_driver_t const _usbd_driver[] = { #if CFG_TUD_DFU_RUNTIME { - DRIVER_NAME("DFU-RUNTIME") + .name = DRIVER_NAME("DFU-RUNTIME"), .init = dfu_rtd_init, .deinit = dfu_rtd_deinit, .reset = dfu_rtd_reset, @@ -216,7 +216,7 @@ tu_static usbd_class_driver_t const _usbd_driver[] = { #if CFG_TUD_DFU { - DRIVER_NAME("DFU") + .name = DRIVER_NAME("DFU"), .init = dfu_moded_init, .deinit = dfu_moded_deinit, .reset = dfu_moded_reset, @@ -229,7 +229,7 @@ tu_static usbd_class_driver_t const _usbd_driver[] = { #if CFG_TUD_ECM_RNDIS || CFG_TUD_NCM { - DRIVER_NAME("NET") + .name = DRIVER_NAME("NET"), .init = netd_init, .deinit = netd_deinit, .reset = netd_reset, @@ -242,7 +242,7 @@ tu_static usbd_class_driver_t const _usbd_driver[] = { #if CFG_TUD_BTH { - DRIVER_NAME("BTH") + .name = DRIVER_NAME("BTH"), .init = btd_init, .deinit = btd_deinit, .reset = btd_reset, diff --git a/src/device/usbd_pvt.h b/src/device/usbd_pvt.h index 47752f32c..7eb504246 100644 --- a/src/device/usbd_pvt.h +++ b/src/device/usbd_pvt.h @@ -23,8 +23,8 @@ * * This file is part of the TinyUSB stack. */ -#ifndef _TUSB_USBD_PVT_H_ -#define _TUSB_USBD_PVT_H_ +#ifndef TUSB_USBD_PVT_H_ +#define TUSB_USBD_PVT_H_ #include "osal/osal.h" #include "common/tusb_fifo.h" @@ -40,10 +40,7 @@ //--------------------------------------------------------------------+ typedef struct { - #if CFG_TUSB_DEBUG >= CFG_TUD_LOG_LEVEL char const* name; - #endif - void (* init ) (void); bool (* deinit ) (void); void (* reset ) (uint8_t rhport); diff --git a/test/hil/hfp.json b/test/hil/hfp.json new file mode 100644 index 000000000..e79a3cfc9 --- /dev/null +++ b/test/hil/hfp.json @@ -0,0 +1,25 @@ +{ + "boards": [ + { + "name": "stm32l412nucleo", + "uid": "41003B000E504E5457323020", + "flasher": "jlink", + "flasher_sn": "774470029", + "flasher_args": "-device STM32L412KB" + }, + { + "name": "stm32f746disco", + "uid": "210041000C51343237303334", + "flasher": "jlink", + "flasher_sn": "770935966", + "flasher_args": "-device STM32F746NG" + }, + { + "name": "lpcxpresso43s67", + "uid": "08F000044528BAAA8D858F58C50700F5", + "flasher": "jlink", + "flasher_sn": "728973776", + "flasher_args": "-device LPC43S67_M4" + } + ] +} diff --git a/test/hil/hil_hfp.json b/test/hil/hil_hfp.json deleted file mode 100644 index e79a3cfc9..000000000 --- a/test/hil/hil_hfp.json +++ /dev/null @@ -1,25 +0,0 @@ -{ - "boards": [ - { - "name": "stm32l412nucleo", - "uid": "41003B000E504E5457323020", - "flasher": "jlink", - "flasher_sn": "774470029", - "flasher_args": "-device STM32L412KB" - }, - { - "name": "stm32f746disco", - "uid": "210041000C51343237303334", - "flasher": "jlink", - "flasher_sn": "770935966", - "flasher_args": "-device STM32F746NG" - }, - { - "name": "lpcxpresso43s67", - "uid": "08F000044528BAAA8D858F58C50700F5", - "flasher": "jlink", - "flasher_sn": "728973776", - "flasher_args": "-device LPC43S67_M4" - } - ] -} diff --git a/test/hil/hil_pi4.json b/test/hil/hil_pi4.json deleted file mode 100644 index 8aff81910..000000000 --- a/test/hil/hil_pi4.json +++ /dev/null @@ -1,37 +0,0 @@ -{ - "boards": [ - { - "name": "raspberry_pi_pico", - "uid": "E6614C311B764A37", - "flasher": "openocd", - "flasher_sn": "E6614103E72C1D2F", - "flasher_args": "-f interface/cmsis-dap.cfg -f target/rp2040.cfg -c \"adapter speed 5000\"" - }, - { - "name": "espressif_s3_devkitm", - "uid": "84F703C084E4", - "tests": [ - "cdc_msc_freertos", "hid_composite_freertos" - ], - "flasher": "esptool", - "flasher_sn": "3ea619acd1cdeb11a0a0b806e93fd3f1", - "flasher_args": "-b 1500000" - }, - { - "name": "feather_nrf52840_express", - "uid": "1F0479CD0F764471", - "flasher": "jlink", - "flasher_sn": "000682804350", - "flasher_args": "-device nrf52840_xxaa" - }, - { - "name": "itsybitsy_m4", - "uid": "D784B28C5338533335202020FF044726", - "flasher": "bossac", - "flashser_vendor": "Adafruit Industries", - "flasher_product": "ItsyBitsy M4 Express", - "flasher_reset_pin": "2", - "flasher_args": "--offset 0x4000" - } - ] -} diff --git a/test/hil/hil_test.py b/test/hil/hil_test.py index 7f03ce43f..dffb81765 100644 --- a/test/hil/hil_test.py +++ b/test/hil/hil_test.py @@ -33,12 +33,14 @@ import serial import subprocess import json import glob +import platform # for RPI double reset -try: - import gpiozero -except ImportError: - pass +if platform.machine() == 'aarch64': + try: + import gpiozero + except ImportError: + pass ENUM_TIMEOUT = 10 @@ -111,27 +113,39 @@ def read_disk_file(id, fname): # ------------------------------------------------------------- # Flashing firmware # ------------------------------------------------------------- +def run_cmd(cmd): + # print(cmd) + r = subprocess.run(cmd, shell=True, stdout=subprocess.PIPE, stderr=subprocess.STDOUT) + title = 'command error' + if r.returncode != 0: + # print build output if failed + if os.getenv('CI'): + print(f"::group::{title}") + print(r.stdout.decode("utf-8")) + print(f"::endgroup::") + else: + print(title) + print(r.stdout.decode("utf-8")) + return r + + def flash_jlink(board, firmware): - script = ['halt', 'r', f'loadfile {firmware}', 'r', 'go', 'exit'] + script = ['halt', 'r', f'loadfile {firmware}.elf', 'r', 'go', 'exit'] with open('flash.jlink', 'w') as f: f.writelines(f'{s}\n' for s in script) - ret = subprocess.run( - f'JLinkExe -USB {board["flasher_sn"]} {board["flasher_args"]} -if swd -JTAGConf -1,-1 -speed auto -NoGui 1 -ExitOnError 1 -CommandFile flash.jlink', - shell=True, stdout=subprocess.PIPE, stderr=subprocess.STDOUT) + ret = run_cmd(f'JLinkExe -USB {board["flasher_sn"]} {board["flasher_args"]} -if swd -JTAGConf -1,-1 -speed auto -NoGui 1 -ExitOnError 1 -CommandFile flash.jlink') os.remove('flash.jlink') return ret def flash_openocd(board, firmware): - ret = subprocess.run( - f'openocd -c "adapter serial {board["flasher_sn"]}" {board["flasher_args"]} -c "program {firmware} reset exit"', - shell=True, stdout=subprocess.PIPE, stderr=subprocess.STDOUT) + ret = run_cmd(f'openocd -c "adapter serial {board["flasher_sn"]}" {board["flasher_args"]} -c "program {firmware}.elf reset exit"') return ret def flash_esptool(board, firmware): port = get_serial_dev(board["flasher_sn"], None, None, 0) - dir = os.path.dirname(firmware) + dir = os.path.dirname(f'{firmware}.bin') with open(f'{dir}/config.env') as f: IDF_TARGET = json.load(f)['IDF_TARGET'] with open(f'{dir}/flash_args') as f: @@ -154,9 +168,11 @@ def doublereset_with_rpi_gpio(board): time.sleep(0.1) led.on() + def flash_bossac(board, firmware): # double reset to enter bootloader - doublereset_with_rpi_gpio(board) + if platform.machine() == 'aarch64': + doublereset_with_rpi_gpio(board) port = get_serial_dev(board["uid"], board["flashser_vendor"], board["flasher_product"], 0) timeout = ENUM_TIMEOUT @@ -169,8 +185,7 @@ def flash_bossac(board, firmware): assert timeout, 'bossac bootloader is not available' # sleep a bit more for bootloader to be ready time.sleep(0.5) - ret = subprocess.run(f'bossac --port {port} {board["flasher_args"]} -U -i -R -e -w {firmware}', shell=True, stdout=subprocess.PIPE, - stderr=subprocess.STDOUT) + ret = run_cmd(f'bossac --port {port} {board["flasher_args"]} -U -i -R -e -w {firmware}.bin') return ret # ------------------------------------------------------------- @@ -325,7 +340,8 @@ def main(config_file, board): config_boards = [e for e in config['boards'] if e['name'] in board] for item in config_boards: - print(f'Testing board:{item["name"]}') + name = item['name'] + print(f'Testing board:{name}') flasher = item['flasher'].lower() # default to all tests @@ -344,29 +360,12 @@ def main(config_file, board): test_list.remove(skip) for test in test_list: - fw_list = [ - # cmake: esp32 & samd51 use .bin file - f'cmake-build/cmake-build-{item["name"]}/device/{test}/{test}.elf', - f'cmake-build/cmake-build-{item["name"]}/device/{test}/{test}.bin', - # make - f'examples/device/{test}/_build/{item["name"]}/{test}.elf' - ] - - fw = None - for f in fw_list: - if os.path.isfile(f): - fw = f - break - - if fw is None: - print(f'Cannot find binary file for {test}') - sys.exit(-1) - + fw_name = f'cmake-build/cmake-build-{name}/device/{test}/{test}' print(f' {test} ...', end='') # flash firmware. It may fail randomly, retry a few times for i in range(3): - ret = globals()[f'flash_{flasher}'](item, fw) + ret = globals()[f'flash_{flasher}'](item, fw_name) if ret.returncode == 0: break else: diff --git a/test/hil/pi4.json b/test/hil/pi4.json new file mode 100644 index 000000000..04329bb64 --- /dev/null +++ b/test/hil/pi4.json @@ -0,0 +1,27 @@ +{ + "boards": [ + { + "name": "raspberry_pi_pico", + "uid": "E6614C311B764A37", + "flasher": "openocd", + "flasher_sn": "E6614103E72C1D2F", + "flasher_args": "-f interface/cmsis-dap.cfg -f target/rp2040.cfg -c \"adapter speed 5000\"" + }, + { + "name": "feather_nrf52840_express", + "uid": "1F0479CD0F764471", + "flasher": "jlink", + "flasher_sn": "000682804350", + "flasher_args": "-device nrf52840_xxaa" + }, + { + "name": "itsybitsy_m4", + "uid": "D784B28C5338533335202020FF044726", + "flasher": "bossac", + "flashser_vendor": "Adafruit Industries", + "flasher_product": "ItsyBitsy M4 Express", + "flasher_reset_pin": "2", + "flasher_args": "--offset 0x4000" + } + ] +} diff --git a/test/hil/pi4_esp32.json b/test/hil/pi4_esp32.json new file mode 100644 index 000000000..c95dd2d4e --- /dev/null +++ b/test/hil/pi4_esp32.json @@ -0,0 +1,14 @@ +{ + "boards": [ + { + "name": "espressif_s3_devkitm", + "uid": "84F703C084E4", + "tests": [ + "cdc_msc_freertos", "hid_composite_freertos" + ], + "flasher": "esptool", + "flasher_sn": "3ea619acd1cdeb11a0a0b806e93fd3f1", + "flasher_args": "-b 1500000" + } + ] +} diff --git a/tools/build.py b/tools/build.py new file mode 100644 index 000000000..884cd56f4 --- /dev/null +++ b/tools/build.py @@ -0,0 +1,177 @@ +import os +import sys +import time +import subprocess +import click +from pathlib import Path +from multiprocessing import Pool + +import build_utils + +SUCCEEDED = "\033[32msucceeded\033[0m" +FAILED = "\033[31mfailed\033[0m" + +build_separator = '-' * 106 + + +def run_cmd(cmd): + #print(cmd) + r = subprocess.run(cmd, shell=True, stdout=subprocess.PIPE, stderr=subprocess.STDOUT) + title = 'command error' + if r.returncode != 0: + # print build output if failed + if os.getenv('CI'): + print(f"::group::{title}") + print(r.stdout.decode("utf-8")) + print(f"::endgroup::") + else: + print(title) + print(r.stdout.decode("utf-8")) + return r + +def find_family(board): + bsp_dir = Path("hw/bsp") + for family_dir in bsp_dir.iterdir(): + if family_dir.is_dir(): + board_dir = family_dir / 'boards' / board + if board_dir.exists(): + return family_dir.name + return None + + +def get_examples(family): + all_examples = [] + for d in os.scandir("examples"): + if d.is_dir() and 'cmake' not in d.name and 'build_system' not in d.name: + for entry in os.scandir(d.path): + if entry.is_dir() and 'cmake' not in entry.name: + if family != 'espressif' or 'freertos' in entry.name: + all_examples.append(d.name + '/' + entry.name) + + if family == 'espressif': + all_examples.append('device/board_test') + all_examples.append('device/video_capture') + all_examples.sort() + return all_examples + + +def build_board_cmake(board, toolchain): + start_time = time.monotonic() + ret = [0, 0, 0] + + build_dir = f"cmake-build/cmake-build-{board}" + family = find_family(board) + if family == 'espressif': + # for espressif, we have to build example individually + all_examples = get_examples(family) + for example in all_examples: + r = run_cmd(f'cmake examples/{example} -B {build_dir}/{example} -G "Ninja" -DBOARD={board} -DMAX3421_HOST=1') + if r.returncode == 0: + r = run_cmd(f'cmake --build {build_dir}/{example}') + if r.returncode == 0: + ret[0] += 1 + else: + ret[1] += 1 + else: + r = run_cmd(f'cmake examples -B {build_dir} -G "Ninja" -DBOARD={board} -DCMAKE_BUILD_TYPE=MinSizeRel -DTOOLCHAIN={toolchain}') + if r.returncode == 0: + r = run_cmd(f"cmake --build {build_dir}") + if r.returncode == 0: + ret[0] += 1 + else: + ret[1] += 1 + + duration = time.monotonic() - start_time + + if ret[1] == 0: + status = SUCCEEDED + else: + status = FAILED + + flash_size = "-" + sram_size = "-" + example = 'all' + title = build_utils.build_format.format(example, board, status, "{:.2f}s".format(duration), flash_size, sram_size) + print(title) + return ret + + +def build_family(family, toolchain, build_system): + all_boards = [] + for entry in os.scandir(f"hw/bsp/{family}/boards"): + if entry.is_dir() and entry.name != 'pico_sdk': + all_boards.append(entry.name) + all_boards.sort() + + # success, failed, skipped + ret = [0, 0, 0] + if build_system == 'cmake': + for board in all_boards: + if build_board_cmake(board, toolchain): + ret[0] += 1 + else: + ret[1] += 1 + elif build_system == 'make': + all_examples = get_examples(family) + for example in all_examples: + with Pool(processes=os.cpu_count()) as pool: + pool_args = list((map(lambda b, e=example, o=f"TOOLCHAIN={toolchain}": [e, b, o], all_boards))) + r = pool.starmap(build_utils.build_example, pool_args) + # sum all element of same index (column sum) + rsum = list(map(sum, list(zip(*r)))) + ret[0] += rsum[0] + ret[1] += rsum[1] + ret[2] += rsum[2] + return ret + + +@click.command() +@click.argument('families', nargs=-1, required=False) +@click.option('-b', '--board', multiple=True, default=None, help='Boards to build') +@click.option('-t', '--toolchain', default='gcc', help='Toolchain to use, default is gcc') +@click.option('-s', '--build-system', default='cmake', help='Build system to use, default is cmake') +def main(families, board, toolchain, build_system): + if len(families) == 0 and len(board) == 0: + print("Please specify families or board to build") + return 1 + + print(build_separator) + print(build_utils.build_format.format('Example', 'Board', '\033[39mResult\033[0m', 'Time', 'Flash', 'SRAM')) + total_time = time.monotonic() + total_result = [0, 0, 0] + + # build families: cmake, make + if families is not None: + all_families = [] + if 'all' in families: + for entry in os.scandir("hw/bsp"): + if entry.is_dir() and entry.name != 'espressif' and os.path.isfile(entry.path + "/family.cmake"): + all_families.append(entry.name) + else: + all_families = list(families) + all_families.sort() + + # succeeded, failed + for f in all_families: + fret = build_family(f, toolchain, build_system) + total_result[0] += fret[0] + total_result[1] += fret[1] + total_result[2] += fret[2] + + # build board (only cmake) + if board is not None: + for b in board: + r = build_board_cmake(b, toolchain) + total_result[0] += r[0] + total_result[1] += r[1] + total_result[2] += r[2] + + total_time = time.monotonic() - total_time + print(build_separator) + print(f"Build Summary: {total_result[0]} {SUCCEEDED}, {total_result[1]} {FAILED} and took {total_time:.2f}s") + print(build_separator) + return total_result[1] + + +if __name__ == '__main__': + sys.exit(main()) diff --git a/tools/build_board.py b/tools/build_board.py deleted file mode 100644 index 13376d126..000000000 --- a/tools/build_board.py +++ /dev/null @@ -1,69 +0,0 @@ -import os -import sys -import time -import subprocess -from multiprocessing import Pool - -import build_utils - -SUCCEEDED = "\033[32msucceeded\033[0m" -FAILED = "\033[31mfailed\033[0m" -SKIPPED = "\033[33mskipped\033[0m" - -build_separator = '-' * 106 - - -def filter_with_input(mylist): - if len(sys.argv) > 1: - input_args = list(set(mylist).intersection(sys.argv)) - if len(input_args) > 0: - mylist[:] = input_args - - -if __name__ == '__main__': - # If examples are not specified in arguments, build all - all_examples = [] - for dir1 in os.scandir("examples"): - if dir1.is_dir(): - for entry in os.scandir(dir1.path): - if entry.is_dir(): - all_examples.append(dir1.name + '/' + entry.name) - filter_with_input(all_examples) - all_examples.sort() - - # If boards are not specified in arguments, build all - all_boards = [] - for entry in os.scandir("hw/bsp"): - if entry.is_dir() and os.path.exists(entry.path + "/board.mk"): - all_boards.append(entry.name) - filter_with_input(all_boards) - all_boards.sort() - - # Get dependencies - for b in all_boards: - subprocess.run("make -C examples/device/board_test BOARD={} get-deps".format(b), shell=True, stdout=subprocess.PIPE, stderr=subprocess.STDOUT) - - print(build_separator) - print(build_utils.build_format.format('Example', 'Board', '\033[39mResult\033[0m', 'Time', 'Flash', 'SRAM')) - total_time = time.monotonic() - - # succeeded, failed, skipped - total_result = [0, 0, 0] - for example in all_examples: - print(build_separator) - with Pool(processes=os.cpu_count()) as pool: - pool_args = list((map(lambda b, e=example, o='': [e, b, o], all_boards))) - result = pool.starmap(build_utils.build_example, pool_args) - # sum all element of same index (column sum) - result = list(map(sum, list(zip(*result)))) - - # add to total result - total_result = list(map(lambda x, y: x + y, total_result, result)) - - total_time = time.monotonic() - total_time - print(build_separator) - print("Build Summary: {} {}, {} {}, {} {} and took {:.2f}s".format(total_result[0], SUCCEEDED, total_result[1], - FAILED, total_result[2], SKIPPED, total_time)) - print(build_separator) - - sys.exit(total_result[1]) diff --git a/tools/build_cmake.py b/tools/build_cmake.py deleted file mode 100644 index 2eda3f90f..000000000 --- a/tools/build_cmake.py +++ /dev/null @@ -1,105 +0,0 @@ -import os -import sys -import time -import subprocess -import pathlib -from multiprocessing import Pool - -import build_utils - -SUCCEEDED = "\033[32msucceeded\033[0m" -FAILED = "\033[31mfailed\033[0m" -SKIPPED = "\033[33mskipped\033[0m" - -build_separator = '-' * 106 - -def filter_with_input(mylist): - if len(sys.argv) > 1: - input_args = list(set(mylist).intersection(sys.argv)) - if len(input_args) > 0: - mylist[:] = input_args - - -def build_family(family, cmake_option): - all_boards = [] - for entry in os.scandir("hw/bsp/{}/boards".format(family)): - if entry.is_dir() and entry.name != 'pico_sdk': - all_boards.append(entry.name) - all_boards.sort() - - # success, failed, skipped - ret = [0, 0, 0] - for board in all_boards: - start_time = time.monotonic() - - build_dir = f"cmake-build/cmake-build-{board}" - - # Generate build - r = subprocess.run(f"cmake examples -B {build_dir} -G \"Ninja\" -DFAMILY={family} -DBOARD" - f"={board} -DCMAKE_BUILD_TYPE=MinSizeRel {cmake_option}", shell=True, stdout=subprocess.PIPE, stderr=subprocess.STDOUT) - - # Build - if r.returncode == 0: - r = subprocess.run(f"cmake --build {build_dir}", shell=True, stdout=subprocess.PIPE, - stderr=subprocess.STDOUT) - - duration = time.monotonic() - start_time - - if r.returncode == 0: - status = SUCCEEDED - ret[0] += 1 - else: - status = FAILED - ret[1] += 1 - - flash_size = "-" - sram_size = "-" - example = 'all' - title = build_utils.build_format.format(example, board, status, "{:.2f}s".format(duration), flash_size, sram_size) - - if os.getenv('CI'): - # always print build output if in CI - print(f"::group::{title}") - print(r.stdout.decode("utf-8")) - print(f"::endgroup::") - else: - # print build output if failed - print(title) - if r.returncode != 0: - print(r.stdout.decode("utf-8")) - - return ret - - -if __name__ == '__main__': - cmake_options = '' - for a in sys.argv[1:]: - if a.startswith('-'): - cmake_options += ' ' + a - - # If family are not specified in arguments, build all supported - all_families = [] - for entry in os.scandir("hw/bsp"): - if entry.is_dir() and entry.name != 'espressif' and os.path.isfile(entry.path + "/family.cmake"): - all_families.append(entry.name) - filter_with_input(all_families) - all_families.sort() - - print(build_separator) - print(build_utils.build_format.format('Example', 'Board', '\033[39mResult\033[0m', 'Time', 'Flash', 'SRAM')) - total_time = time.monotonic() - - # succeeded, failed, skipped - total_result = [0, 0, 0] - for family in all_families: - fret = build_family(family, cmake_options) - if len(fret) == len(total_result): - total_result = [total_result[i] + fret[i] for i in range(len(fret))] - - total_time = time.monotonic() - total_time - print(build_separator) - print("Build Summary: {} {}, {} {}, {} {} and took {:.2f}s".format(total_result[0], SUCCEEDED, total_result[1], - FAILED, total_result[2], SKIPPED, total_time)) - print(build_separator) - - sys.exit(total_result[1]) diff --git a/tools/build_make.py b/tools/build_make.py deleted file mode 100644 index 240fc8d64..000000000 --- a/tools/build_make.py +++ /dev/null @@ -1,80 +0,0 @@ -import os -import sys -import time -from multiprocessing import Pool - -import build_utils - -SUCCEEDED = "\033[32msucceeded\033[0m" -FAILED = "\033[31mfailed\033[0m" -SKIPPED = "\033[33mskipped\033[0m" - -build_separator = '-' * 106 - - -def filter_with_input(mylist): - if len(sys.argv) > 1: - input_args = list(set(mylist).intersection(sys.argv)) - if len(input_args) > 0: - mylist[:] = input_args - - -def build_family(example, family, make_option): - all_boards = [] - for entry in os.scandir("hw/bsp/{}/boards".format(family)): - if entry.is_dir() and entry.name != 'pico_sdk': - all_boards.append(entry.name) - filter_with_input(all_boards) - all_boards.sort() - - with Pool(processes=os.cpu_count()) as pool: - pool_args = list((map(lambda b, e=example, o=make_option: [e, b, o], all_boards))) - result = pool.starmap(build_utils.build_example, pool_args) - # sum all element of same index (column sum) - return list(map(sum, list(zip(*result)))) - - -if __name__ == '__main__': - make_option = '' - for a in sys.argv: - if 'TOOLCHAIN=' in sys.argv: - make_option += ' ' + a - - # If examples are not specified in arguments, build all - all_examples = [] - for d in os.scandir("examples"): - if d.is_dir() and 'cmake' not in d.name and 'build_system' not in d.name: - for entry in os.scandir(d.path): - if entry.is_dir() and 'cmake' not in entry.name: - all_examples.append(d.name + '/' + entry.name) - filter_with_input(all_examples) - all_examples.sort() - - # If family are not specified in arguments, build all - all_families = [] - for entry in os.scandir("hw/bsp"): - if entry.is_dir() and os.path.isdir(entry.path + "/boards") and entry.name != 'espressif': - all_families.append(entry.name) - filter_with_input(all_families) - all_families.sort() - - print(build_separator) - print(build_utils.build_format.format('Example', 'Board', '\033[39mResult\033[0m', 'Time', 'Flash', 'SRAM')) - total_time = time.monotonic() - - # succeeded, failed, skipped - total_result = [0, 0, 0] - for example in all_examples: - print(build_separator) - for family in all_families: - fret = build_family(example, family, make_option) - if len(fret) == len(total_result): - total_result = [total_result[i] + fret[i] for i in range(len(fret))] - - total_time = time.monotonic() - total_time - print(build_separator) - print("Build Summary: {} {}, {} {}, {} {} and took {:.2f}s".format(total_result[0], SUCCEEDED, total_result[1], - FAILED, total_result[2], SKIPPED, total_time)) - print(build_separator) - - sys.exit(total_result[1]) diff --git a/tools/get_deps.py b/tools/get_deps.py index cdb5dafe1..bca38fc80 100644 --- a/tools/get_deps.py +++ b/tools/get_deps.py @@ -1,3 +1,4 @@ +import click import sys import subprocess from pathlib import Path @@ -227,27 +228,46 @@ def get_a_dep(d): return 0 -# Arguments can be -# - family name -# - specific deps path -# - all -if __name__ == "__main__": +def find_family(board): + bsp_dir = Path(TOP / "hw/bsp") + for family_dir in bsp_dir.iterdir(): + if family_dir.is_dir(): + board_dir = family_dir / 'boards' / board + if board_dir.exists(): + return family_dir.name + return None + + +@click.command() +@click.argument('family', nargs=-1, required=False) +@click.option('-b', '--board', multiple=True, default=None, help='Boards to fetch') +def main(family, board): + if len(family) == 0 and len(board) == 0: + print("Please specify family or board to fetch") + return + status = 0 deps = list(deps_mandatory.keys()) - # get all if 'all' is argument - if len(sys.argv) == 2 and sys.argv[1] == 'all': + + if 'all' in family: deps += deps_optional.keys() else: - for arg in sys.argv[1:]: - if arg in deps_all.keys(): - # if arg is a dep, add it - deps.append(arg) - else: - # arg is a family name, add all deps of that family - for d in deps_optional: - if arg in deps_optional[d][2]: - deps.append(d) + family = list(family) + if board is not None: + for b in board: + f = find_family(b) + if f is not None: + family.append(f) + + for f in family: + for d in deps_optional: + if f in deps_optional[d][2]: + deps.append(d) with Pool() as pool: status = sum(pool.map(get_a_dep, deps)) - sys.exit(status) + return status + + +if __name__ == "__main__": + sys.exit(main()) -- cgit v1.3.1 From 2f5db37c1aea932845c2de8fe5bb4b1b08b24722 Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 10 May 2024 10:30:47 +0700 Subject: use argparse instead of click to fix cifuzz.yml --- .github/workflows/cifuzz.yml | 1 - tools/get_deps.py | 25 +++++++++++++++---------- 2 files changed, 15 insertions(+), 11 deletions(-) (limited to '.github/workflows') diff --git a/.github/workflows/cifuzz.yml b/.github/workflows/cifuzz.yml index faa0f911c..622d261a0 100644 --- a/.github/workflows/cifuzz.yml +++ b/.github/workflows/cifuzz.yml @@ -12,7 +12,6 @@ on: - '**.h' jobs: Fuzzing: - if: false runs-on: ubuntu-latest steps: - name: Build Fuzzers diff --git a/tools/get_deps.py b/tools/get_deps.py index bca38fc80..2359b4bd0 100644 --- a/tools/get_deps.py +++ b/tools/get_deps.py @@ -1,4 +1,4 @@ -import click +import argparse import sys import subprocess from pathlib import Path @@ -238,28 +238,33 @@ def find_family(board): return None -@click.command() -@click.argument('family', nargs=-1, required=False) -@click.option('-b', '--board', multiple=True, default=None, help='Boards to fetch') -def main(family, board): - if len(family) == 0 and len(board) == 0: +def main(): + parser = argparse.ArgumentParser() + parser.add_argument('families', nargs='*', default=[], help='Families to fetch') + parser.add_argument('-b', '--board', action='append', default=[], help='Boards to fetch') + args = parser.parse_args() + + families = args.families + board = args.board + + if len(families) == 0 and len(board) == 0: print("Please specify family or board to fetch") return status = 0 deps = list(deps_mandatory.keys()) - if 'all' in family: + if 'all' in families: deps += deps_optional.keys() else: - family = list(family) + families = list(families) if board is not None: for b in board: f = find_family(b) if f is not None: - family.append(f) + families.append(f) - for f in family: + for f in families: for d in deps_optional: if f in deps_optional[d][2]: deps.append(d) -- cgit v1.3.1 From 3e2ea7750681b27238043c7158ff5508f01914a3 Mon Sep 17 00:00:00 2001 From: Ha Thach Date: Fri, 10 May 2024 18:55:43 +0700 Subject: More ci tweak (#2636) * change concurrency group to ${{ github.workflow }}-${{ github.ref }} * use argparse for build.py hil_test.py, remove the need to install click * move ci win/mac to build_cmake.yml * rename build_family.yml to build_util.yml * build_util.yml support esp32 * integrate build-espressif into build.yml * build.py support make with --board option * add get_deps action * update hil test to reuse action --- .github/actions/get_deps/action.yml | 29 +++++++ .github/actions/prepare_build/action.yml | 30 ------- .github/actions/setup_toolchain/action.yml | 18 ++++- .github/workflows/build_cmake.yml | 46 +++++++++-- .github/workflows/build_esp.yml | 109 ------------------------- .github/workflows/build_family.yml | 64 --------------- .github/workflows/build_iar.yml | 2 +- .github/workflows/build_renesas.yml | 3 +- .github/workflows/build_util.yml | 59 ++++++++++++++ .github/workflows/build_win_mac.yml | 56 ------------- .github/workflows/ci_set_matrix.py | 2 +- .github/workflows/hil_test.yml | 121 ++++++++++++++++++++-------- .github/workflows/pre-commit.yml | 3 +- examples/device/net_lwip_webserver/skip.txt | 4 +- examples/device/video_capture_2ch/skip.txt | 2 + examples/host/cdc_msc_hid_freertos/only.txt | 1 - hw/bsp/lpc17/family.mk | 2 +- hw/bsp/lpc40/family.mk | 2 + src/class/net/ncm_device.c | 16 ++-- test/hil/hil_test.py | 19 +++-- test/hil/pi4.json | 10 +++ test/hil/pi4_esp32.json | 14 ---- tools/build.py | 46 +++++++---- tools/build_esp32.py | 106 ------------------------ tools/get_deps.py | 11 ++- 25 files changed, 314 insertions(+), 461 deletions(-) create mode 100644 .github/actions/get_deps/action.yml delete mode 100644 .github/actions/prepare_build/action.yml delete mode 100644 .github/workflows/build_esp.yml delete mode 100644 .github/workflows/build_family.yml create mode 100644 .github/workflows/build_util.yml delete mode 100644 .github/workflows/build_win_mac.yml delete mode 100644 test/hil/pi4_esp32.json delete mode 100644 tools/build_esp32.py (limited to '.github/workflows') diff --git a/.github/actions/get_deps/action.yml b/.github/actions/get_deps/action.yml new file mode 100644 index 000000000..38b44a70e --- /dev/null +++ b/.github/actions/get_deps/action.yml @@ -0,0 +1,29 @@ +name: Get dependencies + +inputs: + arg: + required: true + type: string + +runs: + using: "composite" + steps: + - name: Checkout pico-sdk for rp2040 + if: contains(inputs.arg, 'rp2040') || contains(inputs.arg, 'raspberry_pi_pico') + uses: actions/checkout@v4 + with: + repository: raspberrypi/pico-sdk + ref: develop + path: pico-sdk + + - name: Linux dependencies + if: runner.os == 'Linux' + run: | + sudo apt install -y ninja-build + shell: bash + + - name: Get Dependencies + run: | + python3 tools/get_deps.py ${{ inputs.arg }} + echo "PICO_SDK_PATH=${{ github.workspace }}/pico-sdk" >> $GITHUB_ENV + shell: bash diff --git a/.github/actions/prepare_build/action.yml b/.github/actions/prepare_build/action.yml deleted file mode 100644 index 5f2c544c1..000000000 --- a/.github/actions/prepare_build/action.yml +++ /dev/null @@ -1,30 +0,0 @@ -name: Prepare to build - -inputs: - family: - required: true - type: string - -runs: - using: "composite" - steps: - - name: Setup Python - uses: actions/setup-python@v5 - with: - python-version: '3.x' - - - name: Checkout pico-sdk for rp2040 - if: contains(inputs.family, 'rp2040') - uses: actions/checkout@v4 - with: - repository: raspberrypi/pico-sdk - ref: develop - path: pico-sdk - - - name: Get Dependencies - run: | - sudo apt install -y ninja-build - pip install click - python3 tools/get_deps.py ${{ inputs.family }} - echo >> $GITHUB_ENV "PICO_SDK_PATH=$GITHUB_WORKSPACE/pico-sdk" - shell: bash diff --git a/.github/actions/setup_toolchain/action.yml b/.github/actions/setup_toolchain/action.yml index b59ece116..e6c79e7dd 100644 --- a/.github/actions/setup_toolchain/action.yml +++ b/.github/actions/setup_toolchain/action.yml @@ -8,6 +8,11 @@ inputs: required: false type: string +outputs: + build_option: + description: 'Build option for the toolchain e.g --toolchain clang' + value: ${{ steps.set-toolchain-option.outputs.build_option }} + runs: using: "composite" steps: @@ -19,7 +24,7 @@ runs: - name: Pull ESP-IDF docker if: inputs.toolchain == 'esp-idf' - run: docker pull espressif/idf:latest + run: docker pull espressif/idf:${{ inputs.toolchain_url }} shell: bash - name: Download Toolchain @@ -29,3 +34,14 @@ runs: uses: ./.github/actions/setup_toolchain/download with: toolchain_url: ${{ inputs.toolchain_url }} + + - name: Set toolchain option + id: set-toolchain-option + run: | + BUILD_OPTION="" + if [[ "${{ inputs.toolchain }}" == *"clang"* ]]; then + BUILD_OPTION="--toolchain clang" + fi + echo "build_option=$BUILD_OPTION" + echo "build_option=$BUILD_OPTION" >> $GITHUB_OUTPUT + shell: bash diff --git a/.github/workflows/build_cmake.yml b/.github/workflows/build_cmake.yml index b62a0e9bd..4723cf8d9 100644 --- a/.github/workflows/build_cmake.yml +++ b/.github/workflows/build_cmake.yml @@ -12,6 +12,7 @@ on: - 'tools/build.py' - '.github/actions/**' - '.github/workflows/build_cmake.yml' + - '.github/workflows/build_util.yml' - '.github/workflows/ci_set_matrix.py' pull_request: branches: [ master ] @@ -24,9 +25,10 @@ on: - 'tools/build.py' - '.github/actions/**' - '.github/workflows/build_cmake.yml' + - '.github/workflows/build_util.yml' - '.github/workflows/ci_set_matrix.py' concurrency: - group: ${{ github.workflow }}-${{ github.head_ref || github.run_id }} + group: ${{ github.workflow }}-${{ github.ref }} cancel-in-progress: true jobs: @@ -55,7 +57,7 @@ jobs: # --------------------------------------- cmake: needs: set-matrix - uses: ./.github/workflows/build_family.yml + uses: ./.github/workflows/build_util.yml strategy: fail-fast: false matrix: @@ -69,14 +71,14 @@ jobs: build-system: 'cmake' toolchain: ${{ matrix.toolchain }} toolchain_url: ${{ fromJSON(needs.set-matrix.outputs.json)[matrix.toolchain].toolchain_url }} - build-family: ${{ toJSON(fromJSON(needs.set-matrix.outputs.json)[matrix.toolchain].family) }} + build-args: ${{ toJSON(fromJSON(needs.set-matrix.outputs.json)[matrix.toolchain].family) }} # --------------------------------------- # Build Make # --------------------------------------- make: needs: set-matrix - uses: ./.github/workflows/build_family.yml + uses: ./.github/workflows/build_util.yml strategy: fail-fast: false matrix: @@ -90,4 +92,38 @@ jobs: build-system: 'make' toolchain: ${{ matrix.toolchain }} toolchain_url: ${{ fromJSON(needs.set-matrix.outputs.json)[matrix.toolchain].toolchain_url }} - build-family: ${{ toJSON(fromJSON(needs.set-matrix.outputs.json)[matrix.toolchain].family) }} + build-args: ${{ toJSON(fromJSON(needs.set-matrix.outputs.json)[matrix.toolchain].family) }} + + # --------------------------------------- + # Build Make on Windows/MacOS + # --------------------------------------- + make-os: + uses: ./.github/workflows/build_util.yml + strategy: + fail-fast: false + matrix: + os: [windows-latest, macos-latest] + with: + os: ${{ matrix.os }} + build-system: 'make' + toolchain: 'arm-gcc' + build-args: '["-bstm32f411disco"]' + + # --------------------------------------- + # Build Espressif + # --------------------------------------- + espressif: + uses: ./.github/workflows/build_util.yml + strategy: + fail-fast: false + matrix: + board: + # ESP32-S2 + - 'espressif_kaluga_1' + # ESP32-S3 skip since devkitm is also compiled in hil-test workflow + #- 'espressif_s3_devkitm' + with: + build-system: 'cmake' + toolchain: 'esp-idf' + toolchain_url: 'v5.1.1' + build-args: '["-b${{ matrix.board }}"]' diff --git a/.github/workflows/build_esp.yml b/.github/workflows/build_esp.yml deleted file mode 100644 index 66fa8548e..000000000 --- a/.github/workflows/build_esp.yml +++ /dev/null @@ -1,109 +0,0 @@ -name: Build ESP - -on: - workflow_dispatch: - push: - paths: - - 'src/**' - - 'examples/**' - - 'lib/**' - - 'hw/**' - - 'test/hil/**' - - '.github/workflows/build_esp.yml' - pull_request: - branches: [ master ] - paths: - - 'src/**' - - 'examples/**' - - 'lib/**' - - 'hw/**' - - 'test/hil/**' - - '.github/workflows/build_esp.yml' - -concurrency: - group: ${{ github.workflow }}-${{ github.head_ref || github.run_id }} - cancel-in-progress: true - -jobs: - build-esp: - runs-on: ubuntu-latest - strategy: - fail-fast: false - matrix: - board: - # ESP32-S2 - - 'espressif_kaluga_1' - # ESP32-S3 - - 'espressif_s3_devkitm' - steps: - - name: Setup Python - uses: actions/setup-python@v5 - with: - python-version: '3.x' - - - name: Checkout TinyUSB - uses: actions/checkout@v4 - - - name: Setup Toolchain - uses: ./.github/actions/setup_toolchain - with: - toolchain: 'esp-idf' - - - name: Build - run: docker run --rm -v $PWD:/project -w /project espressif/idf:v5.1.1 python3 tools/build.py -b ${{ matrix.board }} - - - name: Upload Artifacts for Hardware Testing - if: matrix.board == 'espressif_s3_devkitm' && github.repository_owner == 'hathach' - uses: actions/upload-artifact@v4 - with: - name: ${{ matrix.board }} - path: | - cmake-build/cmake-build-${{ matrix.board }}/*/*/bootloader/bootloader.bin - cmake-build/cmake-build-${{ matrix.board }}/*/*/*.bin - cmake-build/cmake-build-${{ matrix.board }}/*/*/partition_table/partition-table.bin - cmake-build/cmake-build-${{ matrix.board }}/*/*/config.env - cmake-build/cmake-build-${{ matrix.board }}/*/*/flash_args - - # --------------------------------------- - # Hardware in the loop (HIL) - # Current self-hosted instance is running on an RPI4. For attached hardware checkout hil_pi4.json - # --------------------------------------- - hil-test: - # run only with hathach's commit due to limited resource on RPI4 - if: github.repository_owner == 'hathach' - needs: build-esp - runs-on: [self-hosted, esp32s3, hardware-in-the-loop] - strategy: - fail-fast: false - matrix: - board: - - 'espressif_s3_devkitm' - steps: - - name: Clean workspace - run: | - echo "Cleaning up previous run" - rm -rf "${{ github.workspace }}" - mkdir -p "${{ github.workspace }}" - - # USB bus on rpi4 is not stable, reset it before testing - - name: Reset USB bus - run: | - lsusb - lsusb -t - # reset VIA Labs 2.0 hub - sudo usbreset 001/002 - - - name: Checkout test/hil - uses: actions/checkout@v4 - with: - sparse-checkout: test/hil - - - name: Download Artifacts - uses: actions/download-artifact@v4 - with: - name: ${{ matrix.board }} - path: cmake-build/cmake-build-${{ matrix.board }} - - - name: Test on actual hardware - run: | - python3 test/hil/hil_test.py --board ${{ matrix.board }} pi4_esp32.json diff --git a/.github/workflows/build_family.yml b/.github/workflows/build_family.yml deleted file mode 100644 index 2e89267a3..000000000 --- a/.github/workflows/build_family.yml +++ /dev/null @@ -1,64 +0,0 @@ -name: Build family - -on: - workflow_call: - inputs: - build-system: - required: true - type: string - toolchain: - required: true - type: string - toolchain_url: - required: true - type: string - build-family: - required: true - type: string - -jobs: - family: - runs-on: ubuntu-latest - strategy: - fail-fast: false - matrix: - family: ${{ fromJSON(inputs.build-family) }} - steps: - - name: Checkout TinyUSB - uses: actions/checkout@v4 - - - name: Setup Python - uses: actions/setup-python@v5 - with: - python-version: '3.x' - - - name: Setup Toolchain - uses: ./.github/actions/setup_toolchain - with: - toolchain: ${{ inputs.toolchain }} - toolchain_url: ${{ inputs.toolchain_url }} - - - name: Checkout pico-sdk for rp2040 - if: contains(matrix.family, 'rp2040') - uses: actions/checkout@v4 - with: - repository: raspberrypi/pico-sdk - ref: develop - path: pico-sdk - - - name: Get Dependencies - run: | - sudo apt install -y ninja-build - pip install click - python3 tools/get_deps.py ${{ matrix.family }} - - - name: Build - run: | - OPTION="" - if [[ "${{ inputs.toolchain }}" == *"clang"* ]]; then - OPTION="--toolchain clang" - fi - echo "OPTION=$OPTION" - python tools/build.py -s ${{ inputs.build-system }} $OPTION ${{ matrix.family }} - env: - PICO_SDK_PATH: ${{ github.workspace }}/pico-sdk diff --git a/.github/workflows/build_iar.yml b/.github/workflows/build_iar.yml index c4a7f96b7..34dbda192 100644 --- a/.github/workflows/build_iar.yml +++ b/.github/workflows/build_iar.yml @@ -23,7 +23,7 @@ on: - '.github/workflows/build_iar.yml' concurrency: - group: ${{ github.workflow }}-${{ github.head_ref || github.run_id }} + group: ${{ github.workflow }}-${{ github.ref }} cancel-in-progress: true jobs: diff --git a/.github/workflows/build_renesas.yml b/.github/workflows/build_renesas.yml index 8c83bdbbf..1be49344f 100644 --- a/.github/workflows/build_renesas.yml +++ b/.github/workflows/build_renesas.yml @@ -21,7 +21,7 @@ on: - '.github/workflows/build_renesas.yml' concurrency: - group: ${{ github.workflow }}-${{ github.head_ref || github.run_id }} + group: ${{ github.workflow }}-${{ github.ref }} cancel-in-progress: true jobs: @@ -65,7 +65,6 @@ jobs: - name: Get Dependencies run: | - pip install click python3 tools/get_deps.py ${{ matrix.family }} - name: Build diff --git a/.github/workflows/build_util.yml b/.github/workflows/build_util.yml new file mode 100644 index 000000000..f8ad1900c --- /dev/null +++ b/.github/workflows/build_util.yml @@ -0,0 +1,59 @@ +name: Reusable build util + +on: + workflow_call: + inputs: + build-system: + required: true + type: string + toolchain: + required: true + type: string + toolchain_url: + required: false + type: string + build-args: + required: true + type: string + os: + required: false + type: string + default: 'ubuntu-latest' + +jobs: + family: + runs-on: ${{ inputs.os }} + strategy: + fail-fast: false + matrix: + arg: ${{ fromJSON(inputs.build-args) }} + steps: + - name: Checkout TinyUSB + uses: actions/checkout@v4 + + - name: Setup Python + uses: actions/setup-python@v5 + with: + python-version: '3.x' + + - name: Setup Toolchain + id: setup-toolchain + uses: ./.github/actions/setup_toolchain + with: + toolchain: ${{ inputs.toolchain }} + toolchain_url: ${{ inputs.toolchain_url }} + + - name: Get Dependencies + uses: ./.github/actions/get_deps + with: + arg: ${{ matrix.arg }} + + - name: Build + if: inputs.toolchain != 'esp-idf' + run: | + python tools/build.py -s ${{ inputs.build-system }} ${{ steps.setup-toolchain.outputs.build_option }} ${{ matrix.arg }} + + - name: Build using ESP-IDF docker + if: inputs.toolchain == 'esp-idf' + run: | + docker run --rm -v $PWD:/project -w /project espressif/idf:${{ inputs.toolchain_url }} python3 tools/build.py ${{ matrix.arg }} diff --git a/.github/workflows/build_win_mac.yml b/.github/workflows/build_win_mac.yml deleted file mode 100644 index 35328aa32..000000000 --- a/.github/workflows/build_win_mac.yml +++ /dev/null @@ -1,56 +0,0 @@ -name: Build Windows/MacOS - -on: - workflow_dispatch: - push: - paths: - - 'src/**' - - 'examples/**' - - 'lib/**' - - 'hw/**' - - '.github/workflows/build_win_mac.yml' - pull_request: - branches: [ master ] - paths: - - 'src/**' - - 'examples/**' - - 'lib/**' - - 'hw/**' - - '.github/workflows/build_win_mac.yml' - -concurrency: - group: ${{ github.workflow }}-${{ github.head_ref || github.run_id }} - cancel-in-progress: true - -jobs: - # --------------------------------------- - # Build ARM family - # --------------------------------------- - build-arm: - strategy: - fail-fast: false - matrix: - os: [windows-latest, macos-latest] - runs-on: ${{ matrix.os }} - - steps: - - name: Setup Python - uses: actions/setup-python@v5 - with: - python-version: '3.x' - - - name: Install ARM GCC - uses: carlosperate/arm-none-eabi-gcc-action@v1 - with: - release: '10.3-2021.10' - - - name: Checkout TinyUSB - uses: actions/checkout@v4 - - - name: Get Dependencies - run: | - pip install click - python3 tools/get_deps.py stm32f4 - - - name: Build - run: python3 tools/build.py -s make stm32f2 diff --git a/.github/workflows/ci_set_matrix.py b/.github/workflows/ci_set_matrix.py index 2a17be6a1..ea758d917 100644 --- a/.github/workflows/ci_set_matrix.py +++ b/.github/workflows/ci_set_matrix.py @@ -16,7 +16,7 @@ family_list = { "ch32v307 fomu gd32vf103": ["riscv-gcc"], "imxrt": ["arm-gcc", "arm-clang"], "kinetis_k kinetis_kl kinetis_k32l2": ["arm-gcc", "arm-clang"], - "lpc11 lpc13 lpc15": ["arm-gcc"], + "lpc11 lpc13 lpc15": ["arm-gcc", "arm-clang"], "lpc17 lpc18 lpc40 lpc43": ["arm-gcc", "arm-clang"], "lpc51 lpc54 lpc55": ["arm-gcc", "arm-clang"], "mcx": ["arm-gcc"], diff --git a/.github/workflows/hil_test.yml b/.github/workflows/hil_test.yml index 024ab969d..796ff32dc 100644 --- a/.github/workflows/hil_test.yml +++ b/.github/workflows/hil_test.yml @@ -24,15 +24,18 @@ on: - '.github/actions/**' - '.github/workflows/hil_test.yml' concurrency: - group: ${{ github.workflow }}-${{ github.head_ref || github.run_id }} + group: ${{ github.workflow }}-${{ github.ref }} cancel-in-progress: true jobs: + # --------------------------------------- + # Build Non Espressif + # --------------------------------------- build: if: github.repository_owner == 'hathach' runs-on: ubuntu-latest outputs: - BOARD_LIST: ${{ steps.parse_hil_json.outputs.BOARD_LIST }} + BOARDS_LIST: ${{ steps.parse_hil_json.outputs.BOARDS_LIST }} steps: - name: Checkout TinyUSB uses: actions/checkout@v4 @@ -42,38 +45,29 @@ jobs: with: python-version: '3.x' - - name: Install ARM GCC - uses: carlosperate/arm-none-eabi-gcc-action@v1 - with: - release: '12.3.Rel1' - - name: Parse HIL json id: parse_hil_json run: | sudo apt install -y jq - BOARD_LIST=$(jq -r '.boards[] | "-b " + .name' test/hil/pi4.json | tr '\n' ' ') - echo "BOARD_LIST=$BOARD_LIST" - echo >> $GITHUB_ENV "BOARD_LIST=$BOARD_LIST" - echo >> $GITHUB_OUTPUT "BOARD_LIST=$BOARD_LIST" - - name: Checkout pico-sdk for rp2040 - uses: actions/checkout@v4 + # Non-Espresif boards + BOARDS_LIST=$(jq -r '.boards[] | select(.flasher != "esptool") | "-b " + .name' test/hil/pi4.json | tr '\n' ' ') + echo "BOARDS_LIST=$BOARDS_LIST" + echo "BOARDS_LIST=$BOARDS_LIST" >> $GITHUB_ENV + echo "BOARDS_LIST=$BOARDS_LIST" >> $GITHUB_OUTPUT + + - name: Setup ARM Toolchain + uses: ./.github/actions/setup_toolchain with: - repository: raspberrypi/pico-sdk - ref: develop - path: pico-sdk + toolchain: 'arm-gcc' - name: Get Dependencies - run: | - pip install click - sudo apt install -y ninja-build - python3 tools/get_deps.py $BOARD_LIST + uses: ./.github/actions/get_deps + with: + arg: ${{ env.BOARDS_LIST }} - name: Build - run: | - python tools/build.py $BOARD_LIST - env: - PICO_SDK_PATH: ${{ github.workspace }}/pico-sdk + run: python tools/build.py $BOARDS_LIST - name: Upload Artifacts for Hardware Testing uses: actions/upload-artifact@v4 @@ -83,16 +77,71 @@ jobs: cmake-build/cmake-build-*/*/*/*.elf cmake-build/cmake-build-*/*/*/*.bin + # --------------------------------------- + # Build Espressif + # --------------------------------------- + build-esp: + runs-on: ubuntu-latest + outputs: + BOARDS_LIST: ${{ steps.parse_hil_json.outputs.BOARDS_LIST }} + steps: + - name: Checkout TinyUSB + uses: actions/checkout@v4 + + - name: Setup Python + uses: actions/setup-python@v5 + with: + python-version: '3.x' + + - name: Parse HIL json + id: parse_hil_json + run: | + sudo apt install -y jq + # Espressif boards + BOARDS_LIST=$(jq -r '.boards[] | select(.flasher == "esptool") | "-b " + .name' test/hil/pi4.json | tr '\n' ' ') + echo "BOARDS_LIST=$BOARDS_LIST" + echo "BOARDS_LIST=$BOARDS_LIST" >> $GITHUB_ENV + echo "BOARDS_LIST=$BOARDS_LIST" >> $GITHUB_OUTPUT + + - name: Setup ESP-IDF + if: env.BOARDS_LIST != '' + uses: ./.github/actions/setup_toolchain + with: + toolchain: 'esp-idf' + toolchain_url: 'v5.1.1' + + - name: Get Dependencies + uses: ./.github/actions/get_deps + with: + arg: ${{ env.BOARDS_LIST }} + + - name: Build Espressif + if: env.BOARDS_LIST != '' + run: docker run --rm -v $PWD:/project -w /project espressif/idf:v5.1.1 python3 tools/build.py $BOARDS_LIST + + - name: Upload Artifacts for Hardware Testing + uses: actions/upload-artifact@v4 + with: + name: hil_pi4_esp + path: | + cmake-build/cmake-build-*/*/*/*.bin + cmake-build/cmake-build-*/*/*/bootloader/bootloader.bin + cmake-build/cmake-build-*/*/*/partition_table/partition-table.bin + cmake-build/cmake-build-*/*/*/config.env + cmake-build/cmake-build-*/*/*/flash_args + # --------------------------------------- # Hardware in the loop (HIL) - # Current self-hosted instance is running on an RPI4. For attached hardware checkout hil_pi4.json + # Current self-hosted instance is running on an RPI4. For attached hardware checkout test/hil/pi4.json # --------------------------------------- hil-pi4: if: github.repository_owner == 'hathach' - needs: build - runs-on: [self-hosted, rp2040, nrf52840, hardware-in-the-loop] + needs: + - build + - build-esp + runs-on: [self-hosted, rp2040, nrf52840, esp32s3, hardware-in-the-loop] env: - BOARD_LIST: ${{ needs.build.outputs.BOARD_LIST }} + BOARDS_LIST: "${{ needs.build.outputs.BOARDS_LIST }} ${{ needs.build-esp.outputs.BOARDS_LIST }}" steps: - name: Clean workspace run: | @@ -103,8 +152,7 @@ jobs: # USB bus on rpi4 is not stable, reset it before testing - name: Reset USB bus run: | - lsusb - lsusb -t + # lsusb -t # reset VIA Labs 2.0 hub sudo usbreset 001/002 @@ -119,7 +167,16 @@ jobs: name: hil_pi4 path: cmake-build + - name: Download Artifacts + uses: actions/download-artifact@v4 + with: + name: hil_pi4_esp + path: cmake-build + - name: Test on actual hardware run: | - echo "BOARD_LIST=$BOARD_LIST" - python3 test/hil/hil_test.py $BOARD_LIST pi4.json + echo "BOARDS_LIST=$BOARDS_LIST" + echo "::group::{cmake-build contents}" + tree cmake-build + echo "::endgroup::" + python3 test/hil/hil_test.py $BOARDS_LIST pi4.json diff --git a/.github/workflows/pre-commit.yml b/.github/workflows/pre-commit.yml index 6b3151702..d1ffe6ca1 100644 --- a/.github/workflows/pre-commit.yml +++ b/.github/workflows/pre-commit.yml @@ -7,7 +7,7 @@ on: branches: [ master ] concurrency: - group: ${{ github.workflow }}-${{ github.head_ref || github.run_id }} + group: ${{ github.workflow }}-${{ github.ref }} cancel-in-progress: true jobs: @@ -38,7 +38,6 @@ jobs: - name: Build Fuzzer run: | - pip install click export CC=clang export CXX=clang++ fuzz_harness=$(ls -d test/fuzz/device/*/) diff --git a/examples/device/net_lwip_webserver/skip.txt b/examples/device/net_lwip_webserver/skip.txt index bb3ff7885..43cdab71a 100644 --- a/examples/device/net_lwip_webserver/skip.txt +++ b/examples/device/net_lwip_webserver/skip.txt @@ -9,6 +9,8 @@ mcu:STM32F0 mcu:KINETIS_KL family:broadcom_64bit family:broadcom_32bit +family:espressif board:curiosity_nano board:frdm_kl25z -family:espressif +# lpc55 has weird error 'ncm_interface' causes a section type conflict with 'ntb_parameters' +family:lpc55 diff --git a/examples/device/video_capture_2ch/skip.txt b/examples/device/video_capture_2ch/skip.txt index 15c176a2a..86697899b 100644 --- a/examples/device/video_capture_2ch/skip.txt +++ b/examples/device/video_capture_2ch/skip.txt @@ -12,3 +12,5 @@ board:lpcxpresso11u68 board:stm32f303disco board:stm32l412nucleo board:ek_tm4c123gxl +board:uno_r4 +board:ra4m1_ek diff --git a/examples/host/cdc_msc_hid_freertos/only.txt b/examples/host/cdc_msc_hid_freertos/only.txt index 81d993ffa..1e0e60075 100644 --- a/examples/host/cdc_msc_hid_freertos/only.txt +++ b/examples/host/cdc_msc_hid_freertos/only.txt @@ -8,5 +8,4 @@ mcu:MIMXRT10XX mcu:MIMXRT11XX mcu:MSP432E4 mcu:RX65X -mcu:RAXXX mcu:MAX3421 diff --git a/hw/bsp/lpc17/family.mk b/hw/bsp/lpc17/family.mk index 84ed95648..d719a47b7 100644 --- a/hw/bsp/lpc17/family.mk +++ b/hw/bsp/lpc17/family.mk @@ -22,8 +22,8 @@ LDFLAGS_GCC += --specs=nosys.specs --specs=nano.specs SRC_C += \ src/portable/nxp/lpc17_40/dcd_lpc17_40.c \ - src/portable/ohci/ohci.c \ src/portable/nxp/lpc17_40/hcd_lpc17_40.c \ + src/portable/ohci/ohci.c \ $(MCU_DIR)/../gcc/cr_startup_lpc175x_6x.c \ $(MCU_DIR)/src/chip_17xx_40xx.c \ $(MCU_DIR)/src/clock_17xx_40xx.c \ diff --git a/hw/bsp/lpc40/family.mk b/hw/bsp/lpc40/family.mk index 79d868f35..ef9fe57b2 100644 --- a/hw/bsp/lpc40/family.mk +++ b/hw/bsp/lpc40/family.mk @@ -20,6 +20,8 @@ LDFLAGS_GCC += --specs=nosys.specs --specs=nano.specs # All source paths should be relative to the top level. SRC_C += \ src/portable/nxp/lpc17_40/dcd_lpc17_40.c \ + src/portable/nxp/lpc17_40/hcd_lpc17_40.c \ + src/portable/ohci/ohci.c \ $(MCU_DIR)/../gcc/cr_startup_lpc40xx.c \ $(MCU_DIR)/src/chip_17xx_40xx.c \ $(MCU_DIR)/src/clock_17xx_40xx.c \ diff --git a/src/class/net/ncm_device.c b/src/class/net/ncm_device.c index 4b237e4cf..64aba011a 100644 --- a/src/class/net/ncm_device.c +++ b/src/class/net/ncm_device.c @@ -112,7 +112,7 @@ typedef struct { bool notification_xmit_is_running; // notification is currently transmitted } ncm_interface_t; -CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN tu_static ncm_interface_t ncm_interface; +CFG_TUD_MEM_SECTION CFG_TUD_MEM_ALIGN tu_static ncm_interface_t ncm_interface; /** * This is the NTB parameter structure @@ -120,7 +120,7 @@ CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN tu_static ncm_interface_t ncm_interface; * \attention * We are lucky, that byte order is correct */ -CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN tu_static const ntb_parameters_t ntb_parameters = { +CFG_TUD_MEM_SECTION CFG_TUD_MEM_ALIGN tu_static const ntb_parameters_t ntb_parameters = { .wLength = sizeof(ntb_parameters_t), .bmNtbFormatsSupported = 0x01,// 16-bit NTB supported .dwNtbInMaxSize = CFG_TUD_NCM_IN_NTB_MAX_SIZE, @@ -285,7 +285,7 @@ static xmit_ntb_t *xmit_get_next_ready_ntb(void) { * This must be called from netd_xfer_cb() so that ep_in is ready */ static bool xmit_insert_required_zlp(uint8_t rhport, uint32_t xferred_bytes) { - TU_LOG_DRV("xmit_insert_required_zlp(%d,%d)\n", rhport, xferred_bytes); + TU_LOG_DRV("xmit_insert_required_zlp(%d,%ld)\n", rhport, xferred_bytes); if (xferred_bytes == 0 || xferred_bytes % CFG_TUD_NET_ENDPOINT_SIZE != 0) { return false; @@ -521,11 +521,11 @@ static bool recv_validate_datagram(const recv_ntb_t *ntb, uint32_t len) { return false; } if (len < sizeof(nth16_t) + sizeof(ndp16_t) + 2 * sizeof(ndp16_datagram_t)) { - TU_LOG_DRV("(EE) ill min len: %d\n", len); + TU_LOG_DRV("(EE) ill min len: %lu\n", len); return false; } if (nth16->wBlockLength > len) { - TU_LOG_DRV("(EE) ill block length: %d > %d\n", nth16->wBlockLength, len); + TU_LOG_DRV("(EE) ill block length: %d > %lu\n", nth16->wBlockLength, len); return false; } if (nth16->wBlockLength > CFG_TUD_NCM_OUT_NTB_MAX_SIZE) { @@ -533,7 +533,7 @@ static bool recv_validate_datagram(const recv_ntb_t *ntb, uint32_t len) { return false; } if (nth16->wNdpIndex < sizeof(nth16) || nth16->wNdpIndex > len - (sizeof(ndp16_t) + 2 * sizeof(ndp16_datagram_t))) { - TU_LOG_DRV("(EE) ill position of first ndp: %d (%d)\n", nth16->wNdpIndex, len); + TU_LOG_DRV("(EE) ill position of first ndp: %d (%lu)\n", nth16->wNdpIndex, len); return false; } @@ -567,11 +567,11 @@ static bool recv_validate_datagram(const recv_ntb_t *ntb, uint32_t len) { while (ndp16_datagram[ndx].wDatagramIndex != 0 && ndp16_datagram[ndx].wDatagramLength != 0) { TU_LOG_DRV(" << %d %d\n", ndp16_datagram[ndx].wDatagramIndex, ndp16_datagram[ndx].wDatagramLength); if (ndp16_datagram[ndx].wDatagramIndex > len) { - TU_LOG_DRV("(EE) ill start of datagram[%d]: %d (%d)\n", ndx, ndp16_datagram[ndx].wDatagramIndex, len); + TU_LOG_DRV("(EE) ill start of datagram[%d]: %d (%lu)\n", ndx, ndp16_datagram[ndx].wDatagramIndex, len); return false; } if (ndp16_datagram[ndx].wDatagramIndex + ndp16_datagram[ndx].wDatagramLength > len) { - TU_LOG_DRV("(EE) ill end of datagram[%d]: %d (%d)\n", ndx, ndp16_datagram[ndx].wDatagramIndex + ndp16_datagram[ndx].wDatagramLength, len); + TU_LOG_DRV("(EE) ill end of datagram[%d]: %d (%lu)\n", ndx, ndp16_datagram[ndx].wDatagramIndex + ndp16_datagram[ndx].wDatagramLength, len); return false; } ++ndx; diff --git a/test/hil/hil_test.py b/test/hil/hil_test.py index dffb81765..c2699cc6f 100644 --- a/test/hil/hil_test.py +++ b/test/hil/hil_test.py @@ -25,10 +25,10 @@ # ACTION=="add", SUBSYSTEM=="tty", SUBSYSTEMS=="usb", MODE="0666", PROGRAM="/bin/sh -c 'echo $$ID_SERIAL_SHORT | rev | cut -c -8 | rev'", SYMLINK+="ttyUSB_%c.%s{bInterfaceNumber}" # ACTION=="add", SUBSYSTEM=="block", SUBSYSTEMS=="usb", ENV{ID_FS_USAGE}=="filesystem", MODE="0666", PROGRAM="/bin/sh -c 'echo $$ID_SERIAL_SHORT | rev | cut -c -8 | rev'", RUN{program}+="/usr/bin/systemd-mount --no-block --automount=yes --collect $devnode /media/blkUSB_%c.%s{bInterfaceNumber}" +import argparse import os import sys import time -import click import serial import subprocess import json @@ -318,13 +318,18 @@ def test_hid_composite_freertos(id): # ------------------------------------------------------------- # Main # ------------------------------------------------------------- -@click.command() -@click.argument('config_file') -@click.option('-b', '--board', multiple=True, default=None, help='Boards to test, all if not specified') -def main(config_file, board): +def main(): """ Hardware test on specified boards """ + parser = argparse.ArgumentParser() + parser.add_argument('config_file', help='Configuration JSON file') + parser.add_argument('-b', '--board', action='append', default=[], help='Boards to test, all if not specified') + args = parser.parse_args() + + config_file = args.config_file + boards = args.board + config_file = os.path.join(os.path.dirname(__file__), config_file) with open(config_file) as f: config = json.load(f) @@ -334,10 +339,10 @@ def main(config_file, board): 'cdc_dual_ports', 'cdc_msc', 'dfu', 'dfu_runtime', 'hid_boot_interface', ] - if len(board) == 0: + if len(boards) == 0: config_boards = config['boards'] else: - config_boards = [e for e in config['boards'] if e['name'] in board] + config_boards = [e for e in config['boards'] if e['name'] in boards] for item in config_boards: name = item['name'] diff --git a/test/hil/pi4.json b/test/hil/pi4.json index 04329bb64..bdb8a5fa5 100644 --- a/test/hil/pi4.json +++ b/test/hil/pi4.json @@ -22,6 +22,16 @@ "flasher_product": "ItsyBitsy M4 Express", "flasher_reset_pin": "2", "flasher_args": "--offset 0x4000" + }, + { + "name": "espressif_s3_devkitm", + "uid": "84F703C084E4", + "tests": [ + "cdc_msc_freertos", "hid_composite_freertos" + ], + "flasher": "esptool", + "flasher_sn": "3ea619acd1cdeb11a0a0b806e93fd3f1", + "flasher_args": "-b 1500000" } ] } diff --git a/test/hil/pi4_esp32.json b/test/hil/pi4_esp32.json deleted file mode 100644 index c95dd2d4e..000000000 --- a/test/hil/pi4_esp32.json +++ /dev/null @@ -1,14 +0,0 @@ -{ - "boards": [ - { - "name": "espressif_s3_devkitm", - "uid": "84F703C084E4", - "tests": [ - "cdc_msc_freertos", "hid_composite_freertos" - ], - "flasher": "esptool", - "flasher_sn": "3ea619acd1cdeb11a0a0b806e93fd3f1", - "flasher_args": "-b 1500000" - } - ] -} diff --git a/tools/build.py b/tools/build.py index 884cd56f4..967f7c95e 100644 --- a/tools/build.py +++ b/tools/build.py @@ -1,8 +1,8 @@ +import argparse import os import sys import time import subprocess -import click from pathlib import Path from multiprocessing import Pool @@ -125,13 +125,20 @@ def build_family(family, toolchain, build_system): return ret -@click.command() -@click.argument('families', nargs=-1, required=False) -@click.option('-b', '--board', multiple=True, default=None, help='Boards to build') -@click.option('-t', '--toolchain', default='gcc', help='Toolchain to use, default is gcc') -@click.option('-s', '--build-system', default='cmake', help='Build system to use, default is cmake') -def main(families, board, toolchain, build_system): - if len(families) == 0 and len(board) == 0: +def main(): + parser = argparse.ArgumentParser() + parser.add_argument('families', nargs='*', default=[], help='Families to build') + parser.add_argument('-b', '--board', action='append', default=[], help='Boards to build') + parser.add_argument('-t', '--toolchain', default='gcc', help='Toolchain to use, default is gcc') + parser.add_argument('-s', '--build-system', default='cmake', help='Build system to use, default is cmake') + args = parser.parse_args() + + families = args.families + boards = args.board + toolchain = args.toolchain + build_system = args.build_system + + if len(families) == 0 and len(boards) == 0: print("Please specify families or board to build") return 1 @@ -159,12 +166,23 @@ def main(families, board, toolchain, build_system): total_result[2] += fret[2] # build board (only cmake) - if board is not None: - for b in board: - r = build_board_cmake(b, toolchain) - total_result[0] += r[0] - total_result[1] += r[1] - total_result[2] += r[2] + if boards is not None: + for b in boards: + if build_system == 'cmake': + r = build_board_cmake(b, toolchain) + total_result[0] += r[0] + total_result[1] += r[1] + total_result[2] += r[2] + elif build_system == 'make': + all_examples = get_examples(find_family(b)) + with Pool(processes=os.cpu_count()) as pool: + pool_args = list((map(lambda e, bb=b, o=f"TOOLCHAIN={toolchain}": [e, bb, o], all_examples))) + r = pool.starmap(build_utils.build_example, pool_args) + # sum all element of same index (column sum) + rsum = list(map(sum, list(zip(*r)))) + total_result[0] += rsum[0] + total_result[1] += rsum[1] + total_result[2] += rsum[2] total_time = time.monotonic() - total_time print(build_separator) diff --git a/tools/build_esp32.py b/tools/build_esp32.py deleted file mode 100644 index 951467c23..000000000 --- a/tools/build_esp32.py +++ /dev/null @@ -1,106 +0,0 @@ -import os -import glob -import sys -import subprocess -import time - -import build_utils - -SUCCEEDED = "\033[32msucceeded\033[0m" -FAILED = "\033[31mfailed\033[0m" -SKIPPED = "\033[33mskipped\033[0m" - -success_count = 0 -fail_count = 0 -skip_count = 0 -exit_status = 0 - -total_time = time.monotonic() - -build_format = '| {:30} | {:30} | {:18} | {:7} | {:6} | {:6} |' -build_separator = '-' * 107 - -def filter_with_input(mylist): - if len(sys.argv) > 1: - input_args = list(set(mylist).intersection(sys.argv)) - if len(input_args) > 0: - mylist[:] = input_args - - -# Build all examples if not specified -all_examples = [entry.replace('examples/', '') for entry in glob.glob("examples/*/*_freertos")] -filter_with_input(all_examples) -all_examples.append('device/board_test') -all_examples.sort() - -# Build all boards if not specified -all_boards = [] -for entry in os.scandir("hw/bsp/espressif/boards"): - if entry.is_dir(): - all_boards.append(entry.name) -filter_with_input(all_boards) -all_boards.sort() - -def build_board(example, board): - global success_count, fail_count, skip_count, exit_status - start_time = time.monotonic() - - # Check if board is skipped - build_dir = f"cmake-build/cmake-build-{board}/{example}" - - # Generate and build - r = subprocess.run(f"cmake examples/{example} -B {build_dir} -G \"Ninja\" -DBOARD={board} -DMAX3421_HOST=1", - shell=True, stdout=subprocess.PIPE, stderr=subprocess.STDOUT) - if r.returncode == 0: - r = subprocess.run(f"cmake --build {build_dir}", shell=True, stdout=subprocess.PIPE, - stderr=subprocess.STDOUT) - build_duration = time.monotonic() - start_time - flash_size = "-" - sram_size = "-" - - if r.returncode == 0: - success = SUCCEEDED - success_count += 1 - #(flash_size, sram_size) = build_size(example, board) - else: - exit_status = r.returncode - success = FAILED - fail_count += 1 - - title = build_format.format(example, board, success, "{:.2f}s".format(build_duration), flash_size, sram_size) - if os.getenv('CI'): - # always print build output if in CI - print(f"::group::{title}") - print(r.stdout.decode("utf-8")) - print(f"::endgroup::") - else: - # print build output if failed - print(title) - if r.returncode != 0: - print(r.stdout.decode("utf-8")) - - -def build_size(example, board): - #elf_file = 'examples/device/{}/_build/{}/{}-firmware.elf'.format(example, board, board) - elf_file = 'examples/device/{}/_build/{}/*.elf'.format(example, board) - size_output = subprocess.run('size {}'.format(elf_file), shell=True, stdout=subprocess.PIPE).stdout.decode("utf-8") - size_list = size_output.split('\n')[1].split('\t') - flash_size = int(size_list[0]) - sram_size = int(size_list[1]) + int(size_list[2]) - return (flash_size, sram_size) - - -print(build_separator) -print(build_format.format('Example', 'Board', '\033[39mResult\033[0m', 'Time', 'Flash', 'SRAM')) -print(build_separator) - -for example in all_examples: - for board in all_boards: - build_board(example, board) - -total_time = time.monotonic() - total_time -print(build_separator) -print("Build Summary: {} {}, {} {}, {} {} and took {:.2f}s".format(success_count, SUCCEEDED, fail_count, FAILED, skip_count, SKIPPED, total_time)) -print(build_separator) - -sys.exit(exit_status) diff --git a/tools/get_deps.py b/tools/get_deps.py index 2359b4bd0..20cbe64c7 100644 --- a/tools/get_deps.py +++ b/tools/get_deps.py @@ -245,11 +245,10 @@ def main(): args = parser.parse_args() families = args.families - board = args.board + boards = args.board - if len(families) == 0 and len(board) == 0: - print("Please specify family or board to fetch") - return + if len(families) == 0 and len(boards) == 0: + print("Warning: family and board are not specified, only fetching mandatory dependencies.") status = 0 deps = list(deps_mandatory.keys()) @@ -258,8 +257,8 @@ def main(): deps += deps_optional.keys() else: families = list(families) - if board is not None: - for b in board: + if boards is not None: + for b in boards: f = find_family(b) if f is not None: families.append(f) -- cgit v1.3.1