From a268e0b7a31a9b459913e29d04c7f576633f9078 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 24 Jul 2023 15:18:41 +0700 Subject: add lpc40 to cmake --- .github/workflows/cmake_arm.yml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to '.github') diff --git a/.github/workflows/cmake_arm.yml b/.github/workflows/cmake_arm.yml index 4d8cd5591..276360650 100644 --- a/.github/workflows/cmake_arm.yml +++ b/.github/workflows/cmake_arm.yml @@ -35,7 +35,7 @@ jobs: # Alphabetical order - 'imxrt' - 'kinetis_kl' - - 'lpc18' + - 'lpc18 lpc40' - 'lpc55' - 'mcx' - 'ra' -- cgit v1.3.1 From 40833b585b2c4ea38dec034c18aacff35c6bcea6 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 1 Aug 2023 15:33:15 +0700 Subject: enable flto for ra makefile - remove ra from ci make build since it is already in cmake ci --- .github/workflows/build_arm.yml | 1 - .idea/cmake.xml | 6 ++++-- .idea/runConfigurations/uno_r4.xml | 10 ++++++++++ hw/bsp/ra/family.mk | 2 ++ 4 files changed, 16 insertions(+), 3 deletions(-) create mode 100644 .idea/runConfigurations/uno_r4.xml (limited to '.github') diff --git a/.github/workflows/build_arm.yml b/.github/workflows/build_arm.yml index 72ddf164b..44a5e7363 100644 --- a/.github/workflows/build_arm.yml +++ b/.github/workflows/build_arm.yml @@ -39,7 +39,6 @@ jobs: - 'lpc51 lpc54' - 'mm32 msp432e4' - 'nrf' - - 'ra' - 'samd11 samd21' - 'samd51 same5x' - 'saml2x' diff --git a/.idea/cmake.xml b/.idea/cmake.xml index 519623b71..4147bba59 100644 --- a/.idea/cmake.xml +++ b/.idea/cmake.xml @@ -44,8 +44,10 @@ - - + + + + \ No newline at end of file diff --git a/.idea/runConfigurations/uno_r4.xml b/.idea/runConfigurations/uno_r4.xml new file mode 100644 index 000000000..9982f4039 --- /dev/null +++ b/.idea/runConfigurations/uno_r4.xml @@ -0,0 +1,10 @@ + + + + + + + + + \ No newline at end of file diff --git a/hw/bsp/ra/family.mk b/hw/bsp/ra/family.mk index cf8e5d9e9..901808958 100644 --- a/hw/bsp/ra/family.mk +++ b/hw/bsp/ra/family.mk @@ -3,12 +3,14 @@ DEPS_SUBMODULES += hw/mcu/renesas/fsp lib/CMSIS_5 FSP_RA = hw/mcu/renesas/fsp/ra/fsp include $(TOP)/$(BOARD_PATH)/board.mk +# Don't include options setting in .bin file since it create unnecessary large file due to padding OBJCOPY_BIN_OPTION = --only-section .text --only-section .data --only-section .rodata --only-section .bss # Default to port 0 fullspeed, board with port 1 highspeed should override this in board.mk PORT ?= 0 CFLAGS += \ + -flto \ -DCFG_TUSB_MCU=OPT_MCU_RAXXX \ -DBOARD_TUD_RHPORT=$(PORT) \ -Wno-error=undef \ -- cgit v1.3.1 From a160da1f2b941741234f429417798b8df5c33294 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 3 Aug 2023 17:19:47 +0700 Subject: add lpc43 family --- .github/workflows/cmake_arm.yml | 2 +- examples/device/hid_boot_interface/src/main.c | 2 +- examples/typec/power_delivery/src/main.c | 2 +- hw/bsp/board_api.h | 6 +- hw/bsp/ea4357/board.mk | 48 ---- hw/bsp/ea4357/ea4357.c | 301 ---------------------- hw/bsp/ea4357/lpc4357.ld | 324 ------------------------ hw/bsp/ea4357/pca9532.c | 352 -------------------------- hw/bsp/ea4357/pca9532.h | 94 ------- hw/bsp/lpc43/FreeRTOSConfig/FreeRTOSConfig.h | 165 ++++++++++++ hw/bsp/lpc43/boards/ea4357/board.cmake | 16 ++ hw/bsp/lpc43/boards/ea4357/board.h | 40 +++ hw/bsp/lpc43/boards/ea4357/board.mk | 11 + hw/bsp/lpc43/boards/ea4357/lpc4357.ld | 324 ++++++++++++++++++++++++ hw/bsp/lpc43/boards/ea4357/pca9532.c | 352 ++++++++++++++++++++++++++ hw/bsp/lpc43/boards/ea4357/pca9532.h | 94 +++++++ hw/bsp/lpc43/family.c | 312 +++++++++++++++++++++++ hw/bsp/lpc43/family.cmake | 97 +++++++ hw/bsp/lpc43/family.mk | 34 +++ src/portable/chipidea/ci_hs/ci_hs_lpc18_43.h | 9 + 20 files changed, 1462 insertions(+), 1123 deletions(-) delete mode 100644 hw/bsp/ea4357/board.mk delete mode 100644 hw/bsp/ea4357/ea4357.c delete mode 100644 hw/bsp/ea4357/lpc4357.ld delete mode 100644 hw/bsp/ea4357/pca9532.c delete mode 100644 hw/bsp/ea4357/pca9532.h create mode 100644 hw/bsp/lpc43/FreeRTOSConfig/FreeRTOSConfig.h create mode 100644 hw/bsp/lpc43/boards/ea4357/board.cmake create mode 100644 hw/bsp/lpc43/boards/ea4357/board.h create mode 100644 hw/bsp/lpc43/boards/ea4357/board.mk create mode 100644 hw/bsp/lpc43/boards/ea4357/lpc4357.ld create mode 100644 hw/bsp/lpc43/boards/ea4357/pca9532.c create mode 100644 hw/bsp/lpc43/boards/ea4357/pca9532.h create mode 100644 hw/bsp/lpc43/family.c create mode 100644 hw/bsp/lpc43/family.cmake create mode 100644 hw/bsp/lpc43/family.mk (limited to '.github') diff --git a/.github/workflows/cmake_arm.yml b/.github/workflows/cmake_arm.yml index 276360650..5203337ec 100644 --- a/.github/workflows/cmake_arm.yml +++ b/.github/workflows/cmake_arm.yml @@ -35,7 +35,7 @@ jobs: # Alphabetical order - 'imxrt' - 'kinetis_kl' - - 'lpc18 lpc40' + - 'lpc18 lpc40 lpc43' - 'lpc55' - 'mcx' - 'ra' diff --git a/examples/device/hid_boot_interface/src/main.c b/examples/device/hid_boot_interface/src/main.c index 1a155996a..18f301ff0 100644 --- a/examples/device/hid_boot_interface/src/main.c +++ b/examples/device/hid_boot_interface/src/main.c @@ -27,7 +27,7 @@ #include #include -#include "bsp/board.h" +#include "bsp/board_api.h" #include "tusb.h" #include "usb_descriptors.h" diff --git a/examples/typec/power_delivery/src/main.c b/examples/typec/power_delivery/src/main.c index 08590aa74..489d01aa1 100644 --- a/examples/typec/power_delivery/src/main.c +++ b/examples/typec/power_delivery/src/main.c @@ -27,7 +27,7 @@ #include #include -#include "bsp/board.h" +#include "bsp/board_api.h" #include "tusb.h" //--------------------------------------------------------------------+ diff --git a/hw/bsp/board_api.h b/hw/bsp/board_api.h index a7f3826d1..7249f618d 100644 --- a/hw/bsp/board_api.h +++ b/hw/bsp/board_api.h @@ -112,10 +112,14 @@ static inline void board_led_off(void) { static inline void board_delay(uint32_t ms) { uint32_t start_ms = board_millis(); while ( board_millis() - start_ms < ms ) { - #if CFG_TUD_ENABLED // take chance to run usb background + #if CFG_TUD_ENABLED tud_task(); #endif + + #if CFG_TUH_ENABLED + tuh_task(); + #endif } } diff --git a/hw/bsp/ea4357/board.mk b/hw/bsp/ea4357/board.mk deleted file mode 100644 index 6fd229166..000000000 --- a/hw/bsp/ea4357/board.mk +++ /dev/null @@ -1,48 +0,0 @@ -DEPS_SUBMODULES += hw/mcu/nxp/lpcopen - -CFLAGS += \ - -flto \ - -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m4 \ - -mfloat-abi=hard \ - -mfpu=fpv4-sp-d16 \ - -nostdlib \ - -DCORE_M4 \ - -D__USE_LPCOPEN \ - -DCFG_TUSB_MCU=OPT_MCU_LPC43XX - -# mcu driver cause following warnings -CFLAGS += -Wno-error=unused-parameter -Wno-error=strict-prototypes -Wno-error=cast-qual - -MCU_DIR = hw/mcu/nxp/lpcopen/lpc43xx/lpc_chip_43xx - -# All source paths should be relative to the top level. -LD_FILE = hw/bsp/$(BOARD)/lpc4357.ld - -SRC_C += \ - src/portable/chipidea/ci_hs/dcd_ci_hs.c \ - src/portable/chipidea/ci_hs/hcd_ci_hs.c \ - src/portable/ehci/ehci.c \ - $(MCU_DIR)/../gcc/cr_startup_lpc43xx.c \ - $(MCU_DIR)/src/chip_18xx_43xx.c \ - $(MCU_DIR)/src/clock_18xx_43xx.c \ - $(MCU_DIR)/src/gpio_18xx_43xx.c \ - $(MCU_DIR)/src/sysinit_18xx_43xx.c \ - $(MCU_DIR)/src/i2c_18xx_43xx.c \ - $(MCU_DIR)/src/i2cm_18xx_43xx.c \ - $(MCU_DIR)/src/uart_18xx_43xx.c \ - $(MCU_DIR)/src/fpu_init.c - -INC += \ - $(TOP)/$(MCU_DIR)/inc \ - $(TOP)/$(MCU_DIR)/inc/config_43xx - -# For freeRTOS port source -FREERTOS_PORTABLE_SRC = $(FREERTOS_PORTABLE_PATH)/ARM_CM4F - -# For flash-jlink target -JLINK_DEVICE = LPC4357_M4 - -# flash using jlink -flash: flash-jlink diff --git a/hw/bsp/ea4357/ea4357.c b/hw/bsp/ea4357/ea4357.c deleted file mode 100644 index 06975b8cc..000000000 --- a/hw/bsp/ea4357/ea4357.c +++ /dev/null @@ -1,301 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "chip.h" -#include "../board_api.h" -#include "pca9532.h" - -#define UART_DEV LPC_USART0 -#define UART_PORT 0x0f -#define UART_PIN_TX 10 -#define UART_PIN_RX 11 - -// P9_1 joystick down -#define BUTTON_PORT 4 -#define BUTTON_PIN 13 - -//static const struct { -// uint8_t mux_port; -// uint8_t mux_pin; -// -// uint8_t gpio_port; -// uint8_t gpio_pin; -//}buttons[] = -//{ -// {0x0a, 3, 4, 10 }, // Joystick up -// {0x09, 1, 4, 13 }, // Joystick down -// {0x0a, 2, 4, 9 }, // Joystick left -// {0x09, 0, 4, 12 }, // Joystick right -// {0x0a, 1, 4, 8 }, // Joystick press -// {0x02, 7, 0, 7 }, // SW6 -//}; - -#ifdef BOARD_TUD_RHPORT - #define PORT_SUPPORT_DEVICE(_n) (BOARD_TUD_RHPORT == _n) -#else - #define PORT_SUPPORT_DEVICE(_n) 0 -#endif - -#ifdef BOARD_TUH_RHPORT - #define PORT_SUPPORT_HOST(_n) (BOARD_TUH_RHPORT == _n) -#else - #define PORT_SUPPORT_HOST(_n) 0 -#endif - -/*------------------------------------------------------------------*/ -/* BOARD API - *------------------------------------------------------------------*/ - -/* System configuration variables used by chip driver */ -const uint32_t OscRateIn = 12000000; -const uint32_t ExtRateIn = 0; - -static const PINMUX_GRP_T pinmuxing[] = -{ - // Button ( Joystick down ) - {0x9, 1, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC0 | SCU_MODE_PULLUP)}, - - // UART - {UART_PORT, UART_PIN_TX, SCU_MODE_PULLDOWN | SCU_MODE_FUNC1}, - {UART_PORT, UART_PIN_RX, SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_FUNC1}, - - // USB -}; - -/* Pin clock mux values, re-used structure, value in first index is meaningless */ -static const PINMUX_GRP_T pinclockmuxing[] = -{ - {0, 0, (SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_HIGHSPEEDSLEW_EN | SCU_MODE_FUNC0)}, - {0, 1, (SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_HIGHSPEEDSLEW_EN | SCU_MODE_FUNC0)}, - {0, 2, (SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_HIGHSPEEDSLEW_EN | SCU_MODE_FUNC0)}, - {0, 3, (SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_HIGHSPEEDSLEW_EN | SCU_MODE_FUNC0)}, -}; - -// Invoked by startup code -void SystemInit(void) -{ -#ifdef __USE_LPCOPEN - extern void (* const g_pfnVectors[])(void); - unsigned int *pSCB_VTOR = (unsigned int *) 0xE000ED08; - *pSCB_VTOR = (unsigned int) g_pfnVectors; - -#if __FPU_USED == 1 - fpuInit(); -#endif -#endif // __USE_LPCOPEN - - /* Setup system level pin muxing */ - Chip_SCU_SetPinMuxing(pinmuxing, sizeof(pinmuxing) / sizeof(PINMUX_GRP_T)); - - /* Clock pins only, group field not used */ - for (int i = 0; i <(int) (sizeof(pinclockmuxing) / sizeof(pinclockmuxing[0])); i++) - { - Chip_SCU_ClockPinMuxSet(pinclockmuxing[i].pinnum, pinclockmuxing[i].modefunc); - } - - Chip_SetupXtalClocking(); -} - -void board_init(void) -{ - SystemCoreClockUpdate(); - -#if CFG_TUSB_OS == OPT_OS_NONE - // 1ms tick timer - SysTick_Config(SystemCoreClock / 1000); -#elif CFG_TUSB_OS == OPT_OS_FREERTOS - // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) - NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); -#endif - - Chip_GPIO_Init(LPC_GPIO_PORT); - - // LED via pca9532 I2C - Chip_SCU_I2C0PinConfig(I2C0_STANDARD_FAST_MODE); - Chip_I2C_Init(I2C0); - Chip_I2C_SetClockRate(I2C0, 100000); - Chip_I2C_SetMasterEventHandler(I2C0, Chip_I2C_EventHandlerPolling); - - pca9532_init(); - - // Button - Chip_GPIO_SetPinDIRInput(LPC_GPIO_PORT, BUTTON_PORT, BUTTON_PIN); - - //------------- UART -------------// - Chip_UART_Init(UART_DEV); - Chip_UART_SetBaud(UART_DEV, CFG_BOARD_UART_BAUDRATE); - Chip_UART_ConfigData(UART_DEV, UART_LCR_WLEN8 | UART_LCR_SBS_1BIT | UART_LCR_PARITY_DIS); - Chip_UART_TXEnable(UART_DEV); - - //------------- USB -------------// - enum { - USBMODE_DEVICE = 2, - USBMODE_HOST = 3 - }; - - enum { - USBMODE_VBUS_LOW = 0, - USBMODE_VBUS_HIGH = 1 - }; - - /* From EA4357 user manual - * - * USB0 Device operation: - * - Insert jumpers in position 1-2 in JP17/JP18/JP19. - * - GPIO28 controls USB connect functionality - * - LED32 lights when the USB Device is connected. SJ4 has pads 1-2 shorted by default. - * - LED33 is controlled by GPIO27 and signals USB-up state. GPIO54 is used for VBUS - * sensing. - * - * USB0 Host operation: - * - insert jumpers in position 2-3 in JP17/JP18/JP19. - * - USB Host power is controlled via distribution switch U20 (found in schematic page 11). - * - Signal GPIO26 is active low and enables +5V on VBUS2. - * - LED35 light whenever +5V is present on VBUS2. - * - GPIO55 is connected to status feedback from the distribution switch. - * - GPIO54 is used for VBUS sensing. 15Kohm pull-down resistors are always active - * - * Note: - * - Insert jumpers in position 2-3 in JP17/JP18/JP19 - * - Insert jumpers in JP31 (OTG) - */ -#if PORT_SUPPORT_DEVICE(0) || PORT_SUPPORT_HOST(0) - Chip_USB0_Init(); -#endif - - /* From EA4357 user manual - * - * For USB1 Device: - * - a 1.5Kohm pull-up resistor is needed on the USB DP data signal. There are two methods to create this. - * JP15 is inserted and the pull-up resistor is always enabled. Alternatively, the pull-up resistor is activated - * inside the USB OTG chip (U31), and this has to be done via the I2C interface of GPIO52/GPIO53. In the latter case, - * JP15 shall not be inserted. - * - J19 is the connector to use when USB Device is used. Normally it should be a USB-B connector for - * creating a USB Device interface, but the mini-AB connector can also be used in this case. The status - * of VBUS can be read via U31. - * - JP16 shall not be inserted. - * - * For USB1 Host: - * - 15Kohm pull-down resistors are needed on the USB data signals. These are activated inside the USB OTG chip (U31), - * and this has to be done via the I2C interface of GPIO52/GPIO53. - * - J20 is the connector to use when USB Host is used. In order to provide +5V to the external USB - * device connected to this connector (J20), channel A of U20 must be enabled. It is enabled by default - * since SJ5 is normally connected between pin 1-2. - * - LED34 lights green when +5V is available on J20. - * - JP15 shall not be inserted. JP16 has no effect - */ -#if PORT_SUPPORT_DEVICE(1) || PORT_SUPPORT_HOST(1) - Chip_USB1_Init(); -#endif - - // USB0 Vbus Power: P2_3 on EA4357 channel B U20 GPIO26 active low (base board) - Chip_SCU_PinMuxSet(2, 3, SCU_MODE_PULLUP | SCU_MODE_INBUFF_EN | SCU_MODE_FUNC7); - - #if PORT_SUPPORT_DEVICE(0) - // P9_5 (GPIO5[18]) (GPIO28 on oem base) as USB connect, active low. - Chip_SCU_PinMuxSet(9, 5, SCU_MODE_PULLDOWN | SCU_MODE_FUNC4); - Chip_GPIO_SetPinDIROutput(LPC_GPIO_PORT, 5, 18); - #endif - - // USB1 Power: EA4357 channel A U20 is enabled by SJ5 connected to pad 1-2, no more action required - // TODO Remove R170, R171, solder a pair of 15K to USB1 D+/D- to test with USB1 Host -} - -//--------------------------------------------------------------------+ -// USB Interrupt Handler -//--------------------------------------------------------------------+ -void USB0_IRQHandler(void) -{ - #if PORT_SUPPORT_DEVICE(0) - tud_int_handler(0); - #endif - - #if PORT_SUPPORT_HOST(0) - tuh_int_handler(0); - #endif -} - -void USB1_IRQHandler(void) -{ - #if PORT_SUPPORT_DEVICE(1) - tud_int_handler(1); - #endif - - #if PORT_SUPPORT_HOST(1) - tuh_int_handler(1); - #endif -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - if (state) - { - pca9532_setLeds( LED1, 0 ); - }else - { - pca9532_setLeds( 0, LED1); - } -} - -uint32_t board_button_read(void) -{ - // active low - return Chip_GPIO_GetPinState(LPC_GPIO_PORT, BUTTON_PORT, BUTTON_PIN) ? 0 : 1; -} - -int board_uart_read(uint8_t* buf, int len) -{ - return Chip_UART_Read(UART_DEV, buf, len); -} - -int board_uart_write(void const * buf, int len) -{ - uint8_t const* buf8 = (uint8_t const*) buf; - for(int i=0; i MFlashB512 - - /* MAIN TEXT SECTION */ - .text : ALIGN(4) - { - FILL(0xff) - __vectors_start__ = ABSOLUTE(.) ; - KEEP(*(.isr_vector)) - /* Global Section Table */ - . = ALIGN(4) ; - __section_table_start = .; - __data_section_table = .; - LONG(LOADADDR(.data)); - LONG( ADDR(.data)); - LONG( SIZEOF(.data)); - LONG(LOADADDR(.data_RAM2)); - LONG( ADDR(.data_RAM2)); - LONG( SIZEOF(.data_RAM2)); - LONG(LOADADDR(.data_RAM3)); - LONG( ADDR(.data_RAM3)); - LONG( SIZEOF(.data_RAM3)); - LONG(LOADADDR(.data_RAM4)); - LONG( ADDR(.data_RAM4)); - LONG( SIZEOF(.data_RAM4)); - LONG(LOADADDR(.data_RAM5)); - LONG( ADDR(.data_RAM5)); - LONG( SIZEOF(.data_RAM5)); - __data_section_table_end = .; - __bss_section_table = .; - LONG( ADDR(.bss)); - LONG( SIZEOF(.bss)); - LONG( ADDR(.bss_RAM2)); - LONG( SIZEOF(.bss_RAM2)); - LONG( ADDR(.bss_RAM3)); - LONG( SIZEOF(.bss_RAM3)); - LONG( ADDR(.bss_RAM4)); - LONG( SIZEOF(.bss_RAM4)); - LONG( ADDR(.bss_RAM5)); - LONG( SIZEOF(.bss_RAM5)); - __bss_section_table_end = .; - __section_table_end = . ; - /* End of Global Section Table */ - - *(.after_vectors*) - - } > MFlashA512 - - .text : ALIGN(4) - { - *(.text*) - *(.rodata .rodata.* .constdata .constdata.*) - . = ALIGN(4); - } > MFlashA512 - /* - * for exception handling/unwind - some Newlib functions (in common - * with C++ and STDC++) use this. - */ - .ARM.extab : ALIGN(4) - { - *(.ARM.extab* .gnu.linkonce.armextab.*) - } > MFlashA512 - - __exidx_start = .; - - .ARM.exidx : ALIGN(4) - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > MFlashA512 - __exidx_end = .; - - _etext = .; - - /* DATA section for RamLoc40 */ - - .data_RAM2 : ALIGN(4) - { - FILL(0xff) - PROVIDE(__start_data_RAM2 = .) ; - *(.ramfunc.$RAM2) - *(.ramfunc.$RamLoc40) - *(.data.$RAM2*) - *(.data.$RamLoc40*) - . = ALIGN(4) ; - PROVIDE(__end_data_RAM2 = .) ; - } > RamLoc40 AT>MFlashA512 - /* DATA section for RamAHB32 */ - - .data_RAM3 : ALIGN(4) - { - FILL(0xff) - PROVIDE(__start_data_RAM3 = .) ; - *(.ramfunc.$RAM3) - *(.ramfunc.$RamAHB32) - *(.data.$RAM3*) - *(.data.$RamAHB32*) - . = ALIGN(4) ; - PROVIDE(__end_data_RAM3 = .) ; - } > RamAHB32 AT>MFlashA512 - /* DATA section for RamAHB16 */ - - .data_RAM4 : ALIGN(4) - { - FILL(0xff) - PROVIDE(__start_data_RAM4 = .) ; - *(.ramfunc.$RAM4) - *(.ramfunc.$RamAHB16) - *(.data.$RAM4*) - *(.data.$RamAHB16*) - . = ALIGN(4) ; - PROVIDE(__end_data_RAM4 = .) ; - } > RamAHB16 AT>MFlashA512 - /* DATA section for RamAHB_ETB16 */ - - .data_RAM5 : ALIGN(4) - { - FILL(0xff) - PROVIDE(__start_data_RAM5 = .) ; - *(.ramfunc.$RAM5) - *(.ramfunc.$RamAHB_ETB16) - *(.data.$RAM5*) - *(.data.$RamAHB_ETB16*) - . = ALIGN(4) ; - PROVIDE(__end_data_RAM5 = .) ; - } > RamAHB_ETB16 AT>MFlashA512 - /* MAIN DATA SECTION */ - .uninit_RESERVED : ALIGN(4) - { - KEEP(*(.bss.$RESERVED*)) - . = ALIGN(4) ; - _end_uninit_RESERVED = .; - } > RamLoc32 - - /* Main DATA section (RamLoc32) */ - .data : ALIGN(4) - { - FILL(0xff) - _data = . ; - *(vtable) - *(.ramfunc*) - *(.data*) - . = ALIGN(4) ; - _edata = . ; - } > RamLoc32 AT>MFlashA512 - - /* BSS section for RamLoc40 */ - .bss_RAM2 : ALIGN(4) - { - PROVIDE(__start_bss_RAM2 = .) ; - *(.bss.$RAM2*) - *(.bss.$RamLoc40*) - . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ - PROVIDE(__end_bss_RAM2 = .) ; - } > RamLoc40 - - /* BSS section for RamAHB32 */ - .bss_RAM3 : ALIGN(4) - { - PROVIDE(__start_bss_RAM3 = .) ; - *(.bss.$RAM3*) - *(.bss.$RamAHB32*) - . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ - PROVIDE(__end_bss_RAM3 = .) ; - } > RamAHB32 - - /* BSS section for RamAHB16 */ - .bss_RAM4 : ALIGN(4) - { - PROVIDE(__start_bss_RAM4 = .) ; - *(.bss.$RAM4*) - *(.bss.$RamAHB16*) - . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ - PROVIDE(__end_bss_RAM4 = .) ; - } > RamAHB16 - - /* BSS section for RamAHB_ETB16 */ - .bss_RAM5 : ALIGN(4) - { - PROVIDE(__start_bss_RAM5 = .) ; - *(.bss.$RAM5*) - *(.bss.$RamAHB_ETB16*) - . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ - PROVIDE(__end_bss_RAM5 = .) ; - } > RamAHB_ETB16 - - /* MAIN BSS SECTION */ - .bss : ALIGN(4) - { - _bss = .; - *(.bss*) - *(COMMON) - . = ALIGN(4) ; - _ebss = .; - PROVIDE(end = .); - } > RamLoc32 - - /* NOINIT section for RamLoc40 */ - .noinit_RAM2 (NOLOAD) : ALIGN(4) - { - *(.noinit.$RAM2*) - *(.noinit.$RamLoc40*) - . = ALIGN(4) ; - } > RamLoc40 - - /* NOINIT section for RamAHB32 */ - .noinit_RAM3 (NOLOAD) : ALIGN(4) - { - *(.noinit.$RAM3*) - *(.noinit.$RamAHB32*) - . = ALIGN(4) ; - } > RamAHB32 - - /* NOINIT section for RamAHB16 */ - .noinit_RAM4 (NOLOAD) : ALIGN(4) - { - *(.noinit.$RAM4*) - *(.noinit.$RamAHB16*) - . = ALIGN(4) ; - } > RamAHB16 - - /* NOINIT section for RamAHB_ETB16 */ - .noinit_RAM5 (NOLOAD) : ALIGN(4) - { - *(.noinit.$RAM5*) - *(.noinit.$RamAHB_ETB16*) - . = ALIGN(4) ; - } > RamAHB_ETB16 - - /* DEFAULT NOINIT SECTION */ - .noinit (NOLOAD): ALIGN(4) - { - _noinit = .; - *(.noinit*) - . = ALIGN(4) ; - _end_noinit = .; - } > RamLoc32 - PROVIDE(_pvHeapStart = DEFINED(__user_heap_base) ? __user_heap_base : .); - PROVIDE(_vStackTop = DEFINED(__user_stack_top) ? __user_stack_top : __top_RamLoc32 - 0); - - /* ## Create checksum value (used in startup) ## */ - PROVIDE(__valid_user_code_checksum = 0 - - (_vStackTop - + (ResetISR + 1) - + (NMI_Handler + 1) - + (HardFault_Handler + 1) - + (( DEFINED(MemManage_Handler) ? MemManage_Handler : 0 ) + 1) /* MemManage_Handler may not be defined */ - + (( DEFINED(BusFault_Handler) ? BusFault_Handler : 0 ) + 1) /* BusFault_Handler may not be defined */ - + (( DEFINED(UsageFault_Handler) ? UsageFault_Handler : 0 ) + 1) /* UsageFault_Handler may not be defined */ - ) ); - - /* Provide basic symbols giving location and size of main text - * block, including initial values of RW data sections. Note that - * these will need extending to give a complete picture with - * complex images (e.g multiple Flash banks). - */ - _image_start = LOADADDR(.text); - _image_end = LOADADDR(.data) + SIZEOF(.data); - _image_size = _image_end - _image_start; -} diff --git a/hw/bsp/ea4357/pca9532.c b/hw/bsp/ea4357/pca9532.c deleted file mode 100644 index 150167cde..000000000 --- a/hw/bsp/ea4357/pca9532.c +++ /dev/null @@ -1,352 +0,0 @@ -/***************************************************************************** - * - * Copyright(C) 2011, Embedded Artists AB - * All rights reserved. - * - ****************************************************************************** - * Software that is described herein is for illustrative purposes only - * which provides customers with programming information regarding the - * products. This software is supplied "AS IS" without any warranties. - * Embedded Artists AB assumes no responsibility or liability for the - * use of the software, conveys no license or title under any patent, - * copyright, or mask work right to the product. Embedded Artists AB - * reserves the right to make changes in the software without - * notification. Embedded Artists AB also make no representation or - * warranty that such application will be suitable for the specified - * use without further testing or modification. - *****************************************************************************/ - -/* - * NOTE: I2C must have been initialized before calling any functions in this - * file. - */ - -/****************************************************************************** - * Includes - *****************************************************************************/ - -//#include "board.h" -#include "chip.h" - -#include "pca9532.h" - -/****************************************************************************** - * Defines and typedefs - *****************************************************************************/ - -#define I2C_PORT (LPC_I2C0) - -#define LS_MODE_ON 0x01 -#define LS_MODE_BLINK0 0x02 -#define LS_MODE_BLINK1 0x03 - -/****************************************************************************** - * External global variables - *****************************************************************************/ - - -/****************************************************************************** - * Local variables - *****************************************************************************/ - -static uint16_t blink0Shadow = 0; -static uint16_t blink1Shadow = 0; -static uint16_t ledStateShadow = 0; - -/****************************************************************************** - * Local Functions - *****************************************************************************/ - -static Status I2CWrite(uint32_t addr, uint8_t* buf, uint32_t len) -{ - I2CM_XFER_T i2cData; - - i2cData.slaveAddr = addr; - i2cData.options = 0; - i2cData.status = 0; - i2cData.txBuff = buf; - i2cData.txSz = len; - i2cData.rxBuff = NULL; - i2cData.rxSz = 0; - - if (Chip_I2CM_XferBlocking(LPC_I2C0, &i2cData) == 0) { - return ERROR; - } - return SUCCESS; -} - -static Status I2CRead(uint32_t addr, uint8_t* buf, uint32_t len) -{ - I2CM_XFER_T i2cData; - - i2cData.slaveAddr = addr; - i2cData.options = 0; - i2cData.status = 0; - i2cData.txBuff = NULL; - i2cData.txSz = 0; - i2cData.rxBuff = buf; - i2cData.rxSz = len; - - if (Chip_I2CM_XferBlocking(LPC_I2C0, &i2cData) == 0) { - return ERROR; - } - return SUCCESS; -} - -static void setLsStates(uint16_t states, uint8_t* ls, uint8_t mode) -{ -#define IS_LED_SET(bit, x) ( ( ((x) & (bit)) != 0 ) ? 1 : 0 ) - - int i = 0; - - for (i = 0; i < 4; i++) { - - ls[i] |= ( (IS_LED_SET(0x0001, states)*mode << 0) - | (IS_LED_SET(0x0002, states)*mode << 2) - | (IS_LED_SET(0x0004, states)*mode << 4) - | (IS_LED_SET(0x0008, states)*mode << 6) ); - - states >>= 4; - } -} - -static void setLeds(void) -{ - uint8_t buf[5]; - uint8_t ls[4] = {0,0,0,0}; - uint16_t states = ledStateShadow; - - /* LEDs in On/Off state */ - setLsStates(states, ls, LS_MODE_ON); - - /* set the LEDs that should blink */ - setLsStates(blink0Shadow, ls, LS_MODE_BLINK0); - setLsStates(blink1Shadow, ls, LS_MODE_BLINK1); - - - buf[0] = PCA9532_LS0 | PCA9532_AUTO_INC; - buf[1] = ls[0]; - buf[2] = ls[1]; - buf[3] = ls[2]; - buf[4] = ls[3]; - I2CWrite(PCA9532_I2C_ADDR, buf, 5); -} - -/****************************************************************************** - * Public Functions - *****************************************************************************/ - -/****************************************************************************** - * - * Description: - * Initialize the PCA9532 Device - * - *****************************************************************************/ -void pca9532_init (void) -{ - /* nothing to initialize */ -} - -/****************************************************************************** - * - * Description: - * Get the LED states - * - * Params: - * [in] shadow - TRUE if the states should be retrieved from the shadow - * variables. The shadow variable are updated when any - * of setLeds, setBlink0Leds and/or setBlink1Leds are - * called. - * - * FALSE if the state should be retrieved from the PCA9532 - * device. A blinkin LED may be reported as on or off - * depending on the state when calling the function. - * - * Returns: - * A mask where a 1 indicates that a LED is on (or blinking). - * - *****************************************************************************/ -uint16_t pca9532_getLedState (uint32_t shadow) -{ - uint8_t buf[2]; - uint16_t ret = 0; - - if (shadow) { - /* a blink LED is reported as on*/ - ret = (ledStateShadow | blink0Shadow | blink1Shadow); - } - else { - - /* - * A blinking LED may be reported as on or off depending on - * its state when reading the Input register. - */ - - buf[0] = PCA9532_INPUT0; - I2CWrite(PCA9532_I2C_ADDR, buf, 1); - - I2CRead(PCA9532_I2C_ADDR, buf, 1); - ret = buf[0]; - - - buf[0] = PCA9532_INPUT1; - I2CWrite(PCA9532_I2C_ADDR, buf, 1); - - I2CRead(PCA9532_I2C_ADDR, buf, 1); - ret |= (buf[0] << 8); - - - /* invert since LEDs are active low */ - ret = ((~ret) & 0xFFFF); - } - - return (ret & ~PCA9532_NOT_USED); -} - - -/****************************************************************************** - * - * Description: - * Set LED states (on or off). - * - * Params: - * [in] ledOnMask - The LEDs that should be turned on. This mask has - * priority over ledOffMask - * [in] ledOffMask - The LEDs that should be turned off. - * - *****************************************************************************/ -void pca9532_setLeds (uint16_t ledOnMask, uint16_t ledOffMask) -{ - /* turn off leds */ - ledStateShadow &= (~(ledOffMask) & 0xffff); - - /* ledOnMask has priority over ledOffMask */ - ledStateShadow |= ledOnMask; - - /* turn off blinking */ - blink0Shadow &= (~(ledOffMask) & 0xffff); - blink1Shadow &= (~(ledOffMask) & 0xffff); - - setLeds(); -} - -/****************************************************************************** - * - * Description: - * Set the blink period for PWM0. Valid values are 0 - 255 where 0 - * means 152 Hz and 255 means 0.59 Hz. A value of 151 means 1 Hz. - * - * Params: - * [in] period - the period for pwm0 - * - *****************************************************************************/ -void pca9532_setBlink0Period(uint8_t period) -{ - uint8_t buf[2]; - - buf[0] = PCA9532_PSC0; - buf[1] = period; - I2CWrite(PCA9532_I2C_ADDR, buf, 2); -} - -/****************************************************************************** - * - * Description: - * Set the duty cycle for PWM0. Valid values are 0 - 100. 25 means the LED - * is on 25% of the period. - * - * Params: - * [in] duty - duty cycle - * - *****************************************************************************/ -void pca9532_setBlink0Duty(uint8_t duty) -{ - uint8_t buf[2]; - uint32_t tmp = duty; - if (tmp > 100) { - tmp = 100; - } - - tmp = (256 * tmp)/100; - - buf[0] = PCA9532_PWM0; - buf[1] = tmp; - I2CWrite(PCA9532_I2C_ADDR, buf, 2); -} - -/****************************************************************************** - * - * Description: - * Set the LEDs that should blink with rate and duty cycle from PWM0. - * Blinking is turned off with pca9532_setLeds. - * - * Params: - * [in] ledMask - LEDs that should blink. - * - *****************************************************************************/ -void pca9532_setBlink0Leds(uint16_t ledMask) -{ - blink0Shadow |= ledMask; - setLeds(); -} - -/****************************************************************************** - * - * Description: - * Set the blink period for PWM1. Valid values are 0 - 255 where 0 - * means 152 Hz and 255 means 0.59 Hz. A value of 151 means 1 Hz. - * - * Params: - * [in] period - The period for PWM1 - * - *****************************************************************************/ -void pca9532_setBlink1Period(uint8_t period) -{ - uint8_t buf[2]; - - buf[0] = PCA9532_PSC1; - buf[1] = period; - I2CWrite(PCA9532_I2C_ADDR, buf, 2); -} - -/****************************************************************************** - * - * Description: - * Set the duty cycle for PWM1. Valid values are 0 - 100. 25 means the LED - * is on 25% of the period. - * - * Params: - * [in] duty - duty cycle. - * - *****************************************************************************/ -void pca9532_setBlink1Duty(uint8_t duty) -{ - uint8_t buf[2]; - - uint32_t tmp = duty; - if (tmp > 100) { - tmp = 100; - } - - tmp = (256 * tmp)/100; - - buf[0] = PCA9532_PWM1; - buf[1] = tmp; - I2CWrite(PCA9532_I2C_ADDR, buf, 2); -} - -/****************************************************************************** - * - * Description: - * Set the LEDs that should blink with rate and duty cycle from PWM1. - * Blinking is turned off with pca9532_setLeds. - * - * Params: - * [in] ledMask - LEDs that should blink. - * - *****************************************************************************/ -void pca9532_setBlink1Leds(uint16_t ledMask) -{ - blink1Shadow |= ledMask; - setLeds(); -} diff --git a/hw/bsp/ea4357/pca9532.h b/hw/bsp/ea4357/pca9532.h deleted file mode 100644 index f21c1ff09..000000000 --- a/hw/bsp/ea4357/pca9532.h +++ /dev/null @@ -1,94 +0,0 @@ -/***************************************************************************** - * - * Copyright(C) 2011, Embedded Artists AB - * All rights reserved. - * - ****************************************************************************** - * Software that is described herein is for illustrative purposes only - * which provides customers with programming information regarding the - * products. This software is supplied "AS IS" without any warranties. - * Embedded Artists AB assumes no responsibility or liability for the - * use of the software, conveys no license or title under any patent, - * copyright, or mask work right to the product. Embedded Artists AB - * reserves the right to make changes in the software without - * notification. Embedded Artists AB also make no representation or - * warranty that such application will be suitable for the specified - * use without further testing or modification. - *****************************************************************************/ -#ifndef __PCA9532C_H -#define __PCA9532C_H - - -#define PCA9532_I2C_ADDR (0xC0>>1) - -#define PCA9532_INPUT0 0x00 -#define PCA9532_INPUT1 0x01 -#define PCA9532_PSC0 0x02 -#define PCA9532_PWM0 0x03 -#define PCA9532_PSC1 0x04 -#define PCA9532_PWM1 0x05 -#define PCA9532_LS0 0x06 -#define PCA9532_LS1 0x07 -#define PCA9532_LS2 0x08 -#define PCA9532_LS3 0x09 - -#define PCA9532_AUTO_INC 0x10 - - -/* - * The Keys on the base board are mapped to LED0 -> LED3 on - * the PCA9532. - */ - -#define KEY1 0x0001 -#define KEY2 0x0002 -#define KEY3 0x0004 -#define KEY4 0x0008 - -#define KEY_MASK 0x000F - -/* - * MMC Card Detect and MMC Write Protect are mapped to LED4 - * and LED5 on the PCA9532. Please note that WP is active low. - */ - -#define MMC_CD 0x0010 -#define MMC_WP 0x0020 - -#define MMC_MASK 0x30 - -/* NOTE: LED6 and LED7 on PCA9532 are not connected to anything */ -#define PCA9532_NOT_USED 0xC0 - -/* - * Below are the LED constants to use when enabling/disabling a LED. - * The LED names are the names printed on the base board and not - * the names from the PCA9532 device. base_LED1 -> LED8 on PCA9532, - * base_LED2 -> LED9, and so on. - */ - -#define LED1 0x0100 -#define LED2 0x0200 -#define LED3 0x0400 -#define LED4 0x0800 -#define LED5 0x1000 -#define LED6 0x2000 -#define LED7 0x4000 -#define LED8 0x8000 - -#define LED_MASK 0xFF00 - -void pca9532_init (void); -uint16_t pca9532_getLedState (uint32_t shadow); -void pca9532_setLeds (uint16_t ledOnMask, uint16_t ledOffMask); -void pca9532_setBlink0Period(uint8_t period); -void pca9532_setBlink0Duty(uint8_t duty); -void pca9532_setBlink0Leds(uint16_t ledMask); -void pca9532_setBlink1Period(uint8_t period); -void pca9532_setBlink1Duty(uint8_t duty); -void pca9532_setBlink1Leds(uint16_t ledMask); - -#endif /* end __PCA9532C_H */ -/**************************************************************************** -** End Of File -*****************************************************************************/ diff --git a/hw/bsp/lpc43/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/lpc43/FreeRTOSConfig/FreeRTOSConfig.h new file mode 100644 index 000000000..6f80413c0 --- /dev/null +++ b/hw/bsp/lpc43/FreeRTOSConfig/FreeRTOSConfig.h @@ -0,0 +1,165 @@ +/* + * FreeRTOS Kernel V10.0.0 + * Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. If you wish to use our Amazon + * FreeRTOS name, please do so in a fair use way that does not cause confusion. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://www.FreeRTOS.org + * http://aws.amazon.com/freertos + * + * 1 tab == 4 spaces! + */ + + +#ifndef FREERTOS_CONFIG_H +#define FREERTOS_CONFIG_H + +/*----------------------------------------------------------- + * Application specific definitions. + * + * These definitions should be adjusted for your particular hardware and + * application requirements. + * + * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE + * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE. + * + * See http://www.freertos.org/a00110.html. + *----------------------------------------------------------*/ + +// skip if included from IAR assembler +#ifndef __IASMARM__ + #include "chip.h" +#endif + +/* Cortex M23/M33 port configuration. */ +#define configENABLE_MPU 0 +#define configENABLE_FPU 1 +#define configENABLE_TRUSTZONE 0 +#define configMINIMAL_SECURE_STACK_SIZE (1024) + +#define configUSE_PREEMPTION 1 +#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0 +#define configCPU_CLOCK_HZ SystemCoreClock +#define configTICK_RATE_HZ ( 1000 ) +#define configMAX_PRIORITIES ( 5 ) +#define configMINIMAL_STACK_SIZE ( 128 ) +#define configTOTAL_HEAP_SIZE ( configSUPPORT_DYNAMIC_ALLOCATION*4*1024 ) +#define configMAX_TASK_NAME_LEN 16 +#define configUSE_16_BIT_TICKS 0 +#define configIDLE_SHOULD_YIELD 1 +#define configUSE_MUTEXES 1 +#define configUSE_RECURSIVE_MUTEXES 1 +#define configUSE_COUNTING_SEMAPHORES 1 +#define configQUEUE_REGISTRY_SIZE 4 +#define configUSE_QUEUE_SETS 0 +#define configUSE_TIME_SLICING 0 +#define configUSE_NEWLIB_REENTRANT 0 +#define configENABLE_BACKWARD_COMPATIBILITY 1 +#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 + +#define configSUPPORT_STATIC_ALLOCATION 0 +#define configSUPPORT_DYNAMIC_ALLOCATION 1 + +/* Hook function related definitions. */ +#define configUSE_IDLE_HOOK 0 +#define configUSE_TICK_HOOK 0 +#define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning +#define configCHECK_FOR_STACK_OVERFLOW 2 + +/* Run time and task stats gathering related definitions. */ +#define configGENERATE_RUN_TIME_STATS 0 +#define configRECORD_STACK_HIGH_ADDRESS 1 +#define configUSE_TRACE_FACILITY 1 // legacy trace +#define configUSE_STATS_FORMATTING_FUNCTIONS 0 + +/* Co-routine definitions. */ +#define configUSE_CO_ROUTINES 0 +#define configMAX_CO_ROUTINE_PRIORITIES 2 + +/* Software timer related definitions. */ +#define configUSE_TIMERS 1 +#define configTIMER_TASK_PRIORITY (configMAX_PRIORITIES-2) +#define configTIMER_QUEUE_LENGTH 32 +#define configTIMER_TASK_STACK_DEPTH configMINIMAL_STACK_SIZE + +/* Optional functions - most linkers will remove unused functions anyway. */ +#define INCLUDE_vTaskPrioritySet 0 +#define INCLUDE_uxTaskPriorityGet 0 +#define INCLUDE_vTaskDelete 0 +#define INCLUDE_vTaskSuspend 1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY +#define INCLUDE_xResumeFromISR 0 +#define INCLUDE_vTaskDelayUntil 1 +#define INCLUDE_vTaskDelay 1 +#define INCLUDE_xTaskGetSchedulerState 0 +#define INCLUDE_xTaskGetCurrentTaskHandle 1 +#define INCLUDE_uxTaskGetStackHighWaterMark 0 +#define INCLUDE_xTaskGetIdleTaskHandle 0 +#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0 +#define INCLUDE_pcTaskGetTaskName 0 +#define INCLUDE_eTaskGetState 0 +#define INCLUDE_xEventGroupSetBitFromISR 0 +#define INCLUDE_xTimerPendFunctionCall 0 + +/* Define to trap errors during development. */ +// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7 +#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__) + #define configASSERT(_exp) \ + do {\ + if ( !(_exp) ) { \ + volatile uint32_t* ARM_CM_DHCSR = ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \ + if ( (*ARM_CM_DHCSR) & 1UL ) { /* Only halt mcu if debugger is attached */ \ + taskDISABLE_INTERRUPTS(); \ + __asm("BKPT #0\n"); \ + }\ + }\ + } while(0) +#else + #define configASSERT( x ) +#endif + +/* FreeRTOS hooks to NVIC vectors */ +#define xPortPendSVHandler PendSV_Handler +#define xPortSysTickHandler SysTick_Handler +#define vPortSVCHandler SVC_Handler + +//--------------------------------------------------------------------+ +// Interrupt nesting behavior configuration. +//--------------------------------------------------------------------+ + +// For Cortex-M specific: __NVIC_PRIO_BITS is defined in mcu header +#define configPRIO_BITS 3 + +/* The lowest interrupt priority that can be used in a call to a "set priority" function. */ +#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY ((1< MFlashB512 + + /* MAIN TEXT SECTION */ + .text : ALIGN(4) + { + FILL(0xff) + __vectors_start__ = ABSOLUTE(.) ; + KEEP(*(.isr_vector)) + /* Global Section Table */ + . = ALIGN(4) ; + __section_table_start = .; + __data_section_table = .; + LONG(LOADADDR(.data)); + LONG( ADDR(.data)); + LONG( SIZEOF(.data)); + LONG(LOADADDR(.data_RAM2)); + LONG( ADDR(.data_RAM2)); + LONG( SIZEOF(.data_RAM2)); + LONG(LOADADDR(.data_RAM3)); + LONG( ADDR(.data_RAM3)); + LONG( SIZEOF(.data_RAM3)); + LONG(LOADADDR(.data_RAM4)); + LONG( ADDR(.data_RAM4)); + LONG( SIZEOF(.data_RAM4)); + LONG(LOADADDR(.data_RAM5)); + LONG( ADDR(.data_RAM5)); + LONG( SIZEOF(.data_RAM5)); + __data_section_table_end = .; + __bss_section_table = .; + LONG( ADDR(.bss)); + LONG( SIZEOF(.bss)); + LONG( ADDR(.bss_RAM2)); + LONG( SIZEOF(.bss_RAM2)); + LONG( ADDR(.bss_RAM3)); + LONG( SIZEOF(.bss_RAM3)); + LONG( ADDR(.bss_RAM4)); + LONG( SIZEOF(.bss_RAM4)); + LONG( ADDR(.bss_RAM5)); + LONG( SIZEOF(.bss_RAM5)); + __bss_section_table_end = .; + __section_table_end = . ; + /* End of Global Section Table */ + + *(.after_vectors*) + + } > MFlashA512 + + .text : ALIGN(4) + { + *(.text*) + *(.rodata .rodata.* .constdata .constdata.*) + . = ALIGN(4); + } > MFlashA512 + /* + * for exception handling/unwind - some Newlib functions (in common + * with C++ and STDC++) use this. + */ + .ARM.extab : ALIGN(4) + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } > MFlashA512 + + __exidx_start = .; + + .ARM.exidx : ALIGN(4) + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > MFlashA512 + __exidx_end = .; + + _etext = .; + + /* DATA section for RamLoc40 */ + + .data_RAM2 : ALIGN(4) + { + FILL(0xff) + PROVIDE(__start_data_RAM2 = .) ; + *(.ramfunc.$RAM2) + *(.ramfunc.$RamLoc40) + *(.data.$RAM2*) + *(.data.$RamLoc40*) + . = ALIGN(4) ; + PROVIDE(__end_data_RAM2 = .) ; + } > RamLoc40 AT>MFlashA512 + /* DATA section for RamAHB32 */ + + .data_RAM3 : ALIGN(4) + { + FILL(0xff) + PROVIDE(__start_data_RAM3 = .) ; + *(.ramfunc.$RAM3) + *(.ramfunc.$RamAHB32) + *(.data.$RAM3*) + *(.data.$RamAHB32*) + . = ALIGN(4) ; + PROVIDE(__end_data_RAM3 = .) ; + } > RamAHB32 AT>MFlashA512 + /* DATA section for RamAHB16 */ + + .data_RAM4 : ALIGN(4) + { + FILL(0xff) + PROVIDE(__start_data_RAM4 = .) ; + *(.ramfunc.$RAM4) + *(.ramfunc.$RamAHB16) + *(.data.$RAM4*) + *(.data.$RamAHB16*) + . = ALIGN(4) ; + PROVIDE(__end_data_RAM4 = .) ; + } > RamAHB16 AT>MFlashA512 + /* DATA section for RamAHB_ETB16 */ + + .data_RAM5 : ALIGN(4) + { + FILL(0xff) + PROVIDE(__start_data_RAM5 = .) ; + *(.ramfunc.$RAM5) + *(.ramfunc.$RamAHB_ETB16) + *(.data.$RAM5*) + *(.data.$RamAHB_ETB16*) + . = ALIGN(4) ; + PROVIDE(__end_data_RAM5 = .) ; + } > RamAHB_ETB16 AT>MFlashA512 + /* MAIN DATA SECTION */ + .uninit_RESERVED : ALIGN(4) + { + KEEP(*(.bss.$RESERVED*)) + . = ALIGN(4) ; + _end_uninit_RESERVED = .; + } > RamLoc32 + + /* Main DATA section (RamLoc32) */ + .data : ALIGN(4) + { + FILL(0xff) + _data = . ; + *(vtable) + *(.ramfunc*) + *(.data*) + . = ALIGN(4) ; + _edata = . ; + } > RamLoc32 AT>MFlashA512 + + /* BSS section for RamLoc40 */ + .bss_RAM2 : ALIGN(4) + { + PROVIDE(__start_bss_RAM2 = .) ; + *(.bss.$RAM2*) + *(.bss.$RamLoc40*) + . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ + PROVIDE(__end_bss_RAM2 = .) ; + } > RamLoc40 + + /* BSS section for RamAHB32 */ + .bss_RAM3 : ALIGN(4) + { + PROVIDE(__start_bss_RAM3 = .) ; + *(.bss.$RAM3*) + *(.bss.$RamAHB32*) + . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ + PROVIDE(__end_bss_RAM3 = .) ; + } > RamAHB32 + + /* BSS section for RamAHB16 */ + .bss_RAM4 : ALIGN(4) + { + PROVIDE(__start_bss_RAM4 = .) ; + *(.bss.$RAM4*) + *(.bss.$RamAHB16*) + . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ + PROVIDE(__end_bss_RAM4 = .) ; + } > RamAHB16 + + /* BSS section for RamAHB_ETB16 */ + .bss_RAM5 : ALIGN(4) + { + PROVIDE(__start_bss_RAM5 = .) ; + *(.bss.$RAM5*) + *(.bss.$RamAHB_ETB16*) + . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ + PROVIDE(__end_bss_RAM5 = .) ; + } > RamAHB_ETB16 + + /* MAIN BSS SECTION */ + .bss : ALIGN(4) + { + _bss = .; + *(.bss*) + *(COMMON) + . = ALIGN(4) ; + _ebss = .; + PROVIDE(end = .); + } > RamLoc32 + + /* NOINIT section for RamLoc40 */ + .noinit_RAM2 (NOLOAD) : ALIGN(4) + { + *(.noinit.$RAM2*) + *(.noinit.$RamLoc40*) + . = ALIGN(4) ; + } > RamLoc40 + + /* NOINIT section for RamAHB32 */ + .noinit_RAM3 (NOLOAD) : ALIGN(4) + { + *(.noinit.$RAM3*) + *(.noinit.$RamAHB32*) + . = ALIGN(4) ; + } > RamAHB32 + + /* NOINIT section for RamAHB16 */ + .noinit_RAM4 (NOLOAD) : ALIGN(4) + { + *(.noinit.$RAM4*) + *(.noinit.$RamAHB16*) + . = ALIGN(4) ; + } > RamAHB16 + + /* NOINIT section for RamAHB_ETB16 */ + .noinit_RAM5 (NOLOAD) : ALIGN(4) + { + *(.noinit.$RAM5*) + *(.noinit.$RamAHB_ETB16*) + . = ALIGN(4) ; + } > RamAHB_ETB16 + + /* DEFAULT NOINIT SECTION */ + .noinit (NOLOAD): ALIGN(4) + { + _noinit = .; + *(.noinit*) + . = ALIGN(4) ; + _end_noinit = .; + } > RamLoc32 + PROVIDE(_pvHeapStart = DEFINED(__user_heap_base) ? __user_heap_base : .); + PROVIDE(_vStackTop = DEFINED(__user_stack_top) ? __user_stack_top : __top_RamLoc32 - 0); + + /* ## Create checksum value (used in startup) ## */ + PROVIDE(__valid_user_code_checksum = 0 - + (_vStackTop + + (ResetISR + 1) + + (NMI_Handler + 1) + + (HardFault_Handler + 1) + + (( DEFINED(MemManage_Handler) ? MemManage_Handler : 0 ) + 1) /* MemManage_Handler may not be defined */ + + (( DEFINED(BusFault_Handler) ? BusFault_Handler : 0 ) + 1) /* BusFault_Handler may not be defined */ + + (( DEFINED(UsageFault_Handler) ? UsageFault_Handler : 0 ) + 1) /* UsageFault_Handler may not be defined */ + ) ); + + /* Provide basic symbols giving location and size of main text + * block, including initial values of RW data sections. Note that + * these will need extending to give a complete picture with + * complex images (e.g multiple Flash banks). + */ + _image_start = LOADADDR(.text); + _image_end = LOADADDR(.data) + SIZEOF(.data); + _image_size = _image_end - _image_start; +} diff --git a/hw/bsp/lpc43/boards/ea4357/pca9532.c b/hw/bsp/lpc43/boards/ea4357/pca9532.c new file mode 100644 index 000000000..150167cde --- /dev/null +++ b/hw/bsp/lpc43/boards/ea4357/pca9532.c @@ -0,0 +1,352 @@ +/***************************************************************************** + * + * Copyright(C) 2011, Embedded Artists AB + * All rights reserved. + * + ****************************************************************************** + * Software that is described herein is for illustrative purposes only + * which provides customers with programming information regarding the + * products. This software is supplied "AS IS" without any warranties. + * Embedded Artists AB assumes no responsibility or liability for the + * use of the software, conveys no license or title under any patent, + * copyright, or mask work right to the product. Embedded Artists AB + * reserves the right to make changes in the software without + * notification. Embedded Artists AB also make no representation or + * warranty that such application will be suitable for the specified + * use without further testing or modification. + *****************************************************************************/ + +/* + * NOTE: I2C must have been initialized before calling any functions in this + * file. + */ + +/****************************************************************************** + * Includes + *****************************************************************************/ + +//#include "board.h" +#include "chip.h" + +#include "pca9532.h" + +/****************************************************************************** + * Defines and typedefs + *****************************************************************************/ + +#define I2C_PORT (LPC_I2C0) + +#define LS_MODE_ON 0x01 +#define LS_MODE_BLINK0 0x02 +#define LS_MODE_BLINK1 0x03 + +/****************************************************************************** + * External global variables + *****************************************************************************/ + + +/****************************************************************************** + * Local variables + *****************************************************************************/ + +static uint16_t blink0Shadow = 0; +static uint16_t blink1Shadow = 0; +static uint16_t ledStateShadow = 0; + +/****************************************************************************** + * Local Functions + *****************************************************************************/ + +static Status I2CWrite(uint32_t addr, uint8_t* buf, uint32_t len) +{ + I2CM_XFER_T i2cData; + + i2cData.slaveAddr = addr; + i2cData.options = 0; + i2cData.status = 0; + i2cData.txBuff = buf; + i2cData.txSz = len; + i2cData.rxBuff = NULL; + i2cData.rxSz = 0; + + if (Chip_I2CM_XferBlocking(LPC_I2C0, &i2cData) == 0) { + return ERROR; + } + return SUCCESS; +} + +static Status I2CRead(uint32_t addr, uint8_t* buf, uint32_t len) +{ + I2CM_XFER_T i2cData; + + i2cData.slaveAddr = addr; + i2cData.options = 0; + i2cData.status = 0; + i2cData.txBuff = NULL; + i2cData.txSz = 0; + i2cData.rxBuff = buf; + i2cData.rxSz = len; + + if (Chip_I2CM_XferBlocking(LPC_I2C0, &i2cData) == 0) { + return ERROR; + } + return SUCCESS; +} + +static void setLsStates(uint16_t states, uint8_t* ls, uint8_t mode) +{ +#define IS_LED_SET(bit, x) ( ( ((x) & (bit)) != 0 ) ? 1 : 0 ) + + int i = 0; + + for (i = 0; i < 4; i++) { + + ls[i] |= ( (IS_LED_SET(0x0001, states)*mode << 0) + | (IS_LED_SET(0x0002, states)*mode << 2) + | (IS_LED_SET(0x0004, states)*mode << 4) + | (IS_LED_SET(0x0008, states)*mode << 6) ); + + states >>= 4; + } +} + +static void setLeds(void) +{ + uint8_t buf[5]; + uint8_t ls[4] = {0,0,0,0}; + uint16_t states = ledStateShadow; + + /* LEDs in On/Off state */ + setLsStates(states, ls, LS_MODE_ON); + + /* set the LEDs that should blink */ + setLsStates(blink0Shadow, ls, LS_MODE_BLINK0); + setLsStates(blink1Shadow, ls, LS_MODE_BLINK1); + + + buf[0] = PCA9532_LS0 | PCA9532_AUTO_INC; + buf[1] = ls[0]; + buf[2] = ls[1]; + buf[3] = ls[2]; + buf[4] = ls[3]; + I2CWrite(PCA9532_I2C_ADDR, buf, 5); +} + +/****************************************************************************** + * Public Functions + *****************************************************************************/ + +/****************************************************************************** + * + * Description: + * Initialize the PCA9532 Device + * + *****************************************************************************/ +void pca9532_init (void) +{ + /* nothing to initialize */ +} + +/****************************************************************************** + * + * Description: + * Get the LED states + * + * Params: + * [in] shadow - TRUE if the states should be retrieved from the shadow + * variables. The shadow variable are updated when any + * of setLeds, setBlink0Leds and/or setBlink1Leds are + * called. + * + * FALSE if the state should be retrieved from the PCA9532 + * device. A blinkin LED may be reported as on or off + * depending on the state when calling the function. + * + * Returns: + * A mask where a 1 indicates that a LED is on (or blinking). + * + *****************************************************************************/ +uint16_t pca9532_getLedState (uint32_t shadow) +{ + uint8_t buf[2]; + uint16_t ret = 0; + + if (shadow) { + /* a blink LED is reported as on*/ + ret = (ledStateShadow | blink0Shadow | blink1Shadow); + } + else { + + /* + * A blinking LED may be reported as on or off depending on + * its state when reading the Input register. + */ + + buf[0] = PCA9532_INPUT0; + I2CWrite(PCA9532_I2C_ADDR, buf, 1); + + I2CRead(PCA9532_I2C_ADDR, buf, 1); + ret = buf[0]; + + + buf[0] = PCA9532_INPUT1; + I2CWrite(PCA9532_I2C_ADDR, buf, 1); + + I2CRead(PCA9532_I2C_ADDR, buf, 1); + ret |= (buf[0] << 8); + + + /* invert since LEDs are active low */ + ret = ((~ret) & 0xFFFF); + } + + return (ret & ~PCA9532_NOT_USED); +} + + +/****************************************************************************** + * + * Description: + * Set LED states (on or off). + * + * Params: + * [in] ledOnMask - The LEDs that should be turned on. This mask has + * priority over ledOffMask + * [in] ledOffMask - The LEDs that should be turned off. + * + *****************************************************************************/ +void pca9532_setLeds (uint16_t ledOnMask, uint16_t ledOffMask) +{ + /* turn off leds */ + ledStateShadow &= (~(ledOffMask) & 0xffff); + + /* ledOnMask has priority over ledOffMask */ + ledStateShadow |= ledOnMask; + + /* turn off blinking */ + blink0Shadow &= (~(ledOffMask) & 0xffff); + blink1Shadow &= (~(ledOffMask) & 0xffff); + + setLeds(); +} + +/****************************************************************************** + * + * Description: + * Set the blink period for PWM0. Valid values are 0 - 255 where 0 + * means 152 Hz and 255 means 0.59 Hz. A value of 151 means 1 Hz. + * + * Params: + * [in] period - the period for pwm0 + * + *****************************************************************************/ +void pca9532_setBlink0Period(uint8_t period) +{ + uint8_t buf[2]; + + buf[0] = PCA9532_PSC0; + buf[1] = period; + I2CWrite(PCA9532_I2C_ADDR, buf, 2); +} + +/****************************************************************************** + * + * Description: + * Set the duty cycle for PWM0. Valid values are 0 - 100. 25 means the LED + * is on 25% of the period. + * + * Params: + * [in] duty - duty cycle + * + *****************************************************************************/ +void pca9532_setBlink0Duty(uint8_t duty) +{ + uint8_t buf[2]; + uint32_t tmp = duty; + if (tmp > 100) { + tmp = 100; + } + + tmp = (256 * tmp)/100; + + buf[0] = PCA9532_PWM0; + buf[1] = tmp; + I2CWrite(PCA9532_I2C_ADDR, buf, 2); +} + +/****************************************************************************** + * + * Description: + * Set the LEDs that should blink with rate and duty cycle from PWM0. + * Blinking is turned off with pca9532_setLeds. + * + * Params: + * [in] ledMask - LEDs that should blink. + * + *****************************************************************************/ +void pca9532_setBlink0Leds(uint16_t ledMask) +{ + blink0Shadow |= ledMask; + setLeds(); +} + +/****************************************************************************** + * + * Description: + * Set the blink period for PWM1. Valid values are 0 - 255 where 0 + * means 152 Hz and 255 means 0.59 Hz. A value of 151 means 1 Hz. + * + * Params: + * [in] period - The period for PWM1 + * + *****************************************************************************/ +void pca9532_setBlink1Period(uint8_t period) +{ + uint8_t buf[2]; + + buf[0] = PCA9532_PSC1; + buf[1] = period; + I2CWrite(PCA9532_I2C_ADDR, buf, 2); +} + +/****************************************************************************** + * + * Description: + * Set the duty cycle for PWM1. Valid values are 0 - 100. 25 means the LED + * is on 25% of the period. + * + * Params: + * [in] duty - duty cycle. + * + *****************************************************************************/ +void pca9532_setBlink1Duty(uint8_t duty) +{ + uint8_t buf[2]; + + uint32_t tmp = duty; + if (tmp > 100) { + tmp = 100; + } + + tmp = (256 * tmp)/100; + + buf[0] = PCA9532_PWM1; + buf[1] = tmp; + I2CWrite(PCA9532_I2C_ADDR, buf, 2); +} + +/****************************************************************************** + * + * Description: + * Set the LEDs that should blink with rate and duty cycle from PWM1. + * Blinking is turned off with pca9532_setLeds. + * + * Params: + * [in] ledMask - LEDs that should blink. + * + *****************************************************************************/ +void pca9532_setBlink1Leds(uint16_t ledMask) +{ + blink1Shadow |= ledMask; + setLeds(); +} diff --git a/hw/bsp/lpc43/boards/ea4357/pca9532.h b/hw/bsp/lpc43/boards/ea4357/pca9532.h new file mode 100644 index 000000000..f21c1ff09 --- /dev/null +++ b/hw/bsp/lpc43/boards/ea4357/pca9532.h @@ -0,0 +1,94 @@ +/***************************************************************************** + * + * Copyright(C) 2011, Embedded Artists AB + * All rights reserved. + * + ****************************************************************************** + * Software that is described herein is for illustrative purposes only + * which provides customers with programming information regarding the + * products. This software is supplied "AS IS" without any warranties. + * Embedded Artists AB assumes no responsibility or liability for the + * use of the software, conveys no license or title under any patent, + * copyright, or mask work right to the product. Embedded Artists AB + * reserves the right to make changes in the software without + * notification. Embedded Artists AB also make no representation or + * warranty that such application will be suitable for the specified + * use without further testing or modification. + *****************************************************************************/ +#ifndef __PCA9532C_H +#define __PCA9532C_H + + +#define PCA9532_I2C_ADDR (0xC0>>1) + +#define PCA9532_INPUT0 0x00 +#define PCA9532_INPUT1 0x01 +#define PCA9532_PSC0 0x02 +#define PCA9532_PWM0 0x03 +#define PCA9532_PSC1 0x04 +#define PCA9532_PWM1 0x05 +#define PCA9532_LS0 0x06 +#define PCA9532_LS1 0x07 +#define PCA9532_LS2 0x08 +#define PCA9532_LS3 0x09 + +#define PCA9532_AUTO_INC 0x10 + + +/* + * The Keys on the base board are mapped to LED0 -> LED3 on + * the PCA9532. + */ + +#define KEY1 0x0001 +#define KEY2 0x0002 +#define KEY3 0x0004 +#define KEY4 0x0008 + +#define KEY_MASK 0x000F + +/* + * MMC Card Detect and MMC Write Protect are mapped to LED4 + * and LED5 on the PCA9532. Please note that WP is active low. + */ + +#define MMC_CD 0x0010 +#define MMC_WP 0x0020 + +#define MMC_MASK 0x30 + +/* NOTE: LED6 and LED7 on PCA9532 are not connected to anything */ +#define PCA9532_NOT_USED 0xC0 + +/* + * Below are the LED constants to use when enabling/disabling a LED. + * The LED names are the names printed on the base board and not + * the names from the PCA9532 device. base_LED1 -> LED8 on PCA9532, + * base_LED2 -> LED9, and so on. + */ + +#define LED1 0x0100 +#define LED2 0x0200 +#define LED3 0x0400 +#define LED4 0x0800 +#define LED5 0x1000 +#define LED6 0x2000 +#define LED7 0x4000 +#define LED8 0x8000 + +#define LED_MASK 0xFF00 + +void pca9532_init (void); +uint16_t pca9532_getLedState (uint32_t shadow); +void pca9532_setLeds (uint16_t ledOnMask, uint16_t ledOffMask); +void pca9532_setBlink0Period(uint8_t period); +void pca9532_setBlink0Duty(uint8_t duty); +void pca9532_setBlink0Leds(uint16_t ledMask); +void pca9532_setBlink1Period(uint8_t period); +void pca9532_setBlink1Duty(uint8_t duty); +void pca9532_setBlink1Leds(uint16_t ledMask); + +#endif /* end __PCA9532C_H */ +/**************************************************************************** +** End Of File +*****************************************************************************/ diff --git a/hw/bsp/lpc43/family.c b/hw/bsp/lpc43/family.c new file mode 100644 index 000000000..ba3191d5f --- /dev/null +++ b/hw/bsp/lpc43/family.c @@ -0,0 +1,312 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +// Suppress warning caused by mcu driver +#ifdef __GNUC__ +#pragma GCC diagnostic push +#pragma GCC diagnostic ignored "-Wunused-parameter" +#endif + +#include "chip.h" + +#ifdef __GNUC__ +#pragma GCC diagnostic pop +#endif + +#include "bsp/board_api.h" +#include "board.h" + +#define UART_DEV LPC_USART0 +#define UART_PORT 0x0f +#define UART_PIN_TX 10 +#define UART_PIN_RX 11 + +// P9_1 joystick down +#define BUTTON_PORT 4 +#define BUTTON_PIN 13 + +//static const struct { +// uint8_t mux_port; +// uint8_t mux_pin; +// +// uint8_t gpio_port; +// uint8_t gpio_pin; +//}buttons[] = +//{ +// {0x0a, 3, 4, 10 }, // Joystick up +// {0x09, 1, 4, 13 }, // Joystick down +// {0x0a, 2, 4, 9 }, // Joystick left +// {0x09, 0, 4, 12 }, // Joystick right +// {0x0a, 1, 4, 8 }, // Joystick press +// {0x02, 7, 0, 7 }, // SW6 +//}; + +#ifdef BOARD_TUD_RHPORT + #define PORT_SUPPORT_DEVICE(_n) (BOARD_TUD_RHPORT == _n) +#else + #define PORT_SUPPORT_DEVICE(_n) 0 +#endif + +#ifdef BOARD_TUH_RHPORT + #define PORT_SUPPORT_HOST(_n) (BOARD_TUH_RHPORT == _n) +#else + #define PORT_SUPPORT_HOST(_n) 0 +#endif + +/*------------------------------------------------------------------*/ +/* BOARD API + *------------------------------------------------------------------*/ + +/* System configuration variables used by chip driver */ +const uint32_t OscRateIn = 12000000; +const uint32_t ExtRateIn = 0; + +static const PINMUX_GRP_T pinmuxing[] = +{ + // Button ( Joystick down ) + {0x9, 1, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC0 | SCU_MODE_PULLUP)}, + + // UART + {UART_PORT, UART_PIN_TX, SCU_MODE_PULLDOWN | SCU_MODE_FUNC1}, + {UART_PORT, UART_PIN_RX, SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_FUNC1}, + + // USB +}; + +/* Pin clock mux values, re-used structure, value in first index is meaningless */ +static const PINMUX_GRP_T pinclockmuxing[] = +{ + {0, 0, (SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_HIGHSPEEDSLEW_EN | SCU_MODE_FUNC0)}, + {0, 1, (SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_HIGHSPEEDSLEW_EN | SCU_MODE_FUNC0)}, + {0, 2, (SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_HIGHSPEEDSLEW_EN | SCU_MODE_FUNC0)}, + {0, 3, (SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_HIGHSPEEDSLEW_EN | SCU_MODE_FUNC0)}, +}; + +// Invoked by startup code +void SystemInit(void) +{ +#ifdef __USE_LPCOPEN + extern void (* const g_pfnVectors[])(void); + unsigned int *pSCB_VTOR = (unsigned int *) 0xE000ED08; + *pSCB_VTOR = (unsigned int) g_pfnVectors; + +#if __FPU_USED == 1 + fpuInit(); +#endif +#endif // __USE_LPCOPEN + + /* Setup system level pin muxing */ + Chip_SCU_SetPinMuxing(pinmuxing, sizeof(pinmuxing) / sizeof(PINMUX_GRP_T)); + + /* Clock pins only, group field not used */ + for (int i = 0; i <(int) (sizeof(pinclockmuxing) / sizeof(pinclockmuxing[0])); i++) + { + Chip_SCU_ClockPinMuxSet(pinclockmuxing[i].pinnum, pinclockmuxing[i].modefunc); + } + + Chip_SetupXtalClocking(); +} + +void board_init(void) +{ + SystemCoreClockUpdate(); + +#if CFG_TUSB_OS == OPT_OS_NONE + // 1ms tick timer + SysTick_Config(SystemCoreClock / 1000); +#elif CFG_TUSB_OS == OPT_OS_FREERTOS + // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) + NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); +#endif + + Chip_GPIO_Init(LPC_GPIO_PORT); + + // LED via pca9532 I2C + Chip_SCU_I2C0PinConfig(I2C0_STANDARD_FAST_MODE); + Chip_I2C_Init(I2C0); + Chip_I2C_SetClockRate(I2C0, 100000); + Chip_I2C_SetMasterEventHandler(I2C0, Chip_I2C_EventHandlerPolling); + + pca9532_init(); + + // Button + Chip_GPIO_SetPinDIRInput(LPC_GPIO_PORT, BUTTON_PORT, BUTTON_PIN); + + //------------- UART -------------// + Chip_UART_Init(UART_DEV); + Chip_UART_SetBaud(UART_DEV, CFG_BOARD_UART_BAUDRATE); + Chip_UART_ConfigData(UART_DEV, UART_LCR_WLEN8 | UART_LCR_SBS_1BIT | UART_LCR_PARITY_DIS); + Chip_UART_TXEnable(UART_DEV); + + //------------- USB -------------// + enum { + USBMODE_DEVICE = 2, + USBMODE_HOST = 3 + }; + + enum { + USBMODE_VBUS_LOW = 0, + USBMODE_VBUS_HIGH = 1 + }; + + /* From EA4357 user manual + * + * USB0 Device operation: + * - Insert jumpers in position 1-2 in JP17/JP18/JP19. + * - GPIO28 controls USB connect functionality + * - LED32 lights when the USB Device is connected. SJ4 has pads 1-2 shorted by default. + * - LED33 is controlled by GPIO27 and signals USB-up state. GPIO54 is used for VBUS + * sensing. + * + * USB0 Host operation: + * - insert jumpers in position 2-3 in JP17/JP18/JP19. + * - USB Host power is controlled via distribution switch U20 (found in schematic page 11). + * - Signal GPIO26 is active low and enables +5V on VBUS2. + * - LED35 light whenever +5V is present on VBUS2. + * - GPIO55 is connected to status feedback from the distribution switch. + * - GPIO54 is used for VBUS sensing. 15Kohm pull-down resistors are always active + * + * Note: + * - Insert jumpers in position 2-3 in JP17/JP18/JP19 + * - Insert jumpers in JP31 (OTG) + */ +#if PORT_SUPPORT_DEVICE(0) || PORT_SUPPORT_HOST(0) + Chip_USB0_Init(); +#endif + + /* From EA4357 user manual + * + * For USB1 Device: + * - a 1.5Kohm pull-up resistor is needed on the USB DP data signal. There are two methods to create this. + * JP15 is inserted and the pull-up resistor is always enabled. Alternatively, the pull-up resistor is activated + * inside the USB OTG chip (U31), and this has to be done via the I2C interface of GPIO52/GPIO53. In the latter case, + * JP15 shall not be inserted. + * - J19 is the connector to use when USB Device is used. Normally it should be a USB-B connector for + * creating a USB Device interface, but the mini-AB connector can also be used in this case. The status + * of VBUS can be read via U31. + * - JP16 shall not be inserted. + * + * For USB1 Host: + * - 15Kohm pull-down resistors are needed on the USB data signals. These are activated inside the USB OTG chip (U31), + * and this has to be done via the I2C interface of GPIO52/GPIO53. + * - J20 is the connector to use when USB Host is used. In order to provide +5V to the external USB + * device connected to this connector (J20), channel A of U20 must be enabled. It is enabled by default + * since SJ5 is normally connected between pin 1-2. + * - LED34 lights green when +5V is available on J20. + * - JP15 shall not be inserted. JP16 has no effect + */ +#if PORT_SUPPORT_DEVICE(1) || PORT_SUPPORT_HOST(1) + Chip_USB1_Init(); +#endif + + // USB0 Vbus Power: P2_3 on EA4357 channel B U20 GPIO26 active low (base board) + Chip_SCU_PinMuxSet(2, 3, SCU_MODE_PULLUP | SCU_MODE_INBUFF_EN | SCU_MODE_FUNC7); + + #if PORT_SUPPORT_DEVICE(0) + // P9_5 (GPIO5[18]) (GPIO28 on oem base) as USB connect, active low. + Chip_SCU_PinMuxSet(9, 5, SCU_MODE_PULLDOWN | SCU_MODE_FUNC4); + Chip_GPIO_SetPinDIROutput(LPC_GPIO_PORT, 5, 18); + #endif + + // USB1 Power: EA4357 channel A U20 is enabled by SJ5 connected to pad 1-2, no more action required + // TODO Remove R170, R171, solder a pair of 15K to USB1 D+/D- to test with USB1 Host +} + +//--------------------------------------------------------------------+ +// USB Interrupt Handler +//--------------------------------------------------------------------+ +void USB0_IRQHandler(void) +{ + #if PORT_SUPPORT_DEVICE(0) + tud_int_handler(0); + #endif + + #if PORT_SUPPORT_HOST(0) + tuh_int_handler(0); + #endif +} + +void USB1_IRQHandler(void) +{ + #if PORT_SUPPORT_DEVICE(1) + tud_int_handler(1); + #endif + + #if PORT_SUPPORT_HOST(1) + tuh_int_handler(1); + #endif +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ + if (state) + { + pca9532_setLeds( LED1, 0 ); + }else + { + pca9532_setLeds( 0, LED1); + } +} + +uint32_t board_button_read(void) +{ + // active low + return Chip_GPIO_GetPinState(LPC_GPIO_PORT, BUTTON_PORT, BUTTON_PIN) ? 0 : 1; +} + +int board_uart_read(uint8_t* buf, int len) +{ + return Chip_UART_Read(UART_DEV, buf, len); +} + +int board_uart_write(void const * buf, int len) +{ + uint8_t const* buf8 = (uint8_t const*) buf; + for(int i=0; i Date: Fri, 4 Aug 2023 12:49:26 +0700 Subject: add cmake for all board in stm32f4. fix build, also move ci for f4 from makefile to cmake --- .github/workflows/build_arm.yml | 1 - .github/workflows/cmake_arm.yml | 1 + .idea/cmake.xml | 3 +- hw/bsp/stm32f4/FreeRTOSConfig/FreeRTOSConfig.h | 2 +- .../stm32f4/boards/feather_stm32f405/board.cmake | 10 ++ hw/bsp/stm32f4/boards/pyboardv11/board.cmake | 10 ++ .../stm32f4/boards/stm32f401blackpill/board.cmake | 10 ++ .../stm32f407blackvet/STM32F407VETX_FLASH.ld | 177 --------------------- .../stm32f407blackvet/STM32F407VETx_FLASH.ld | 177 +++++++++++++++++++++ .../stm32f4/boards/stm32f407blackvet/board.cmake | 9 +- hw/bsp/stm32f4/boards/stm32f407disco/board.cmake | 10 ++ .../stm32f4/boards/stm32f411blackpill/board.cmake | 10 ++ hw/bsp/stm32f4/boards/stm32f411disco/board.cmake | 10 ++ hw/bsp/stm32f4/boards/stm32f412disco/board.cmake | 10 ++ hw/bsp/stm32f4/boards/stm32f412nucleo/board.cmake | 10 ++ hw/bsp/stm32f4/boards/stm32f439nucleo/board.cmake | 10 ++ hw/bsp/stm32f4/family.c | 86 +++++----- hw/bsp/stm32f4/family.cmake | 114 ++++++------- 18 files changed, 365 insertions(+), 295 deletions(-) create mode 100644 hw/bsp/stm32f4/boards/feather_stm32f405/board.cmake create mode 100644 hw/bsp/stm32f4/boards/pyboardv11/board.cmake create mode 100644 hw/bsp/stm32f4/boards/stm32f401blackpill/board.cmake delete mode 100644 hw/bsp/stm32f4/boards/stm32f407blackvet/STM32F407VETX_FLASH.ld create mode 100644 hw/bsp/stm32f4/boards/stm32f407blackvet/STM32F407VETx_FLASH.ld create mode 100644 hw/bsp/stm32f4/boards/stm32f407disco/board.cmake create mode 100644 hw/bsp/stm32f4/boards/stm32f411blackpill/board.cmake create mode 100644 hw/bsp/stm32f4/boards/stm32f411disco/board.cmake create mode 100644 hw/bsp/stm32f4/boards/stm32f412disco/board.cmake create mode 100644 hw/bsp/stm32f4/boards/stm32f412nucleo/board.cmake create mode 100644 hw/bsp/stm32f4/boards/stm32f439nucleo/board.cmake (limited to '.github') diff --git a/.github/workflows/build_arm.yml b/.github/workflows/build_arm.yml index 44a5e7363..2621e7372 100644 --- a/.github/workflows/build_arm.yml +++ b/.github/workflows/build_arm.yml @@ -43,7 +43,6 @@ jobs: - 'samd51 same5x' - 'saml2x' - 'stm32f2 stm32f3' - - 'stm32f4' - 'stm32l0 stm32u5 stm32wb' - 'tm4c123 xmc4000' steps: diff --git a/.github/workflows/cmake_arm.yml b/.github/workflows/cmake_arm.yml index 5203337ec..8eeae928c 100644 --- a/.github/workflows/cmake_arm.yml +++ b/.github/workflows/cmake_arm.yml @@ -42,6 +42,7 @@ jobs: - 'rp2040' - 'stm32f0' - 'stm32f1' + - 'stm32f4' - 'stm32f7' - 'stm32g0' - 'stm32g4' diff --git a/.idea/cmake.xml b/.idea/cmake.xml index b1d024b81..76143ba10 100644 --- a/.idea/cmake.xml +++ b/.idea/cmake.xml @@ -22,7 +22,7 @@ - + @@ -41,6 +41,7 @@ + diff --git a/hw/bsp/stm32f4/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/stm32f4/FreeRTOSConfig/FreeRTOSConfig.h index b4a9be477..ed90261d0 100644 --- a/hw/bsp/stm32f4/FreeRTOSConfig/FreeRTOSConfig.h +++ b/hw/bsp/stm32f4/FreeRTOSConfig/FreeRTOSConfig.h @@ -66,7 +66,7 @@ #define configUSE_MUTEXES 1 #define configUSE_RECURSIVE_MUTEXES 1 #define configUSE_COUNTING_SEMAPHORES 1 -#define configQUEUE_REGISTRY_SIZE 2 +#define configQUEUE_REGISTRY_SIZE 4 #define configUSE_QUEUE_SETS 0 #define configUSE_TIME_SLICING 0 #define configUSE_NEWLIB_REENTRANT 0 diff --git a/hw/bsp/stm32f4/boards/feather_stm32f405/board.cmake b/hw/bsp/stm32f4/boards/feather_stm32f405/board.cmake new file mode 100644 index 000000000..4910d3a88 --- /dev/null +++ b/hw/bsp/stm32f4/boards/feather_stm32f405/board.cmake @@ -0,0 +1,10 @@ +set(MCU_VARIANT stm32f405xx) +set(JLINK_DEVICE stm32f405rg) + +set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32F405RGTx_FLASH.ld) + +function(update_board TARGET) + target_compile_definitions(${TARGET} PUBLIC + STM32F405xx + ) +endfunction() diff --git a/hw/bsp/stm32f4/boards/pyboardv11/board.cmake b/hw/bsp/stm32f4/boards/pyboardv11/board.cmake new file mode 100644 index 000000000..4910d3a88 --- /dev/null +++ b/hw/bsp/stm32f4/boards/pyboardv11/board.cmake @@ -0,0 +1,10 @@ +set(MCU_VARIANT stm32f405xx) +set(JLINK_DEVICE stm32f405rg) + +set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32F405RGTx_FLASH.ld) + +function(update_board TARGET) + target_compile_definitions(${TARGET} PUBLIC + STM32F405xx + ) +endfunction() diff --git a/hw/bsp/stm32f4/boards/stm32f401blackpill/board.cmake b/hw/bsp/stm32f4/boards/stm32f401blackpill/board.cmake new file mode 100644 index 000000000..fab6a42d2 --- /dev/null +++ b/hw/bsp/stm32f4/boards/stm32f401blackpill/board.cmake @@ -0,0 +1,10 @@ +set(MCU_VARIANT stm32f401xc) +set(JLINK_DEVICE stm32f401cc) + +set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32F401VCTx_FLASH.ld) + +function(update_board TARGET) + target_compile_definitions(${TARGET} PUBLIC + STM32F405xx + ) +endfunction() diff --git a/hw/bsp/stm32f4/boards/stm32f407blackvet/STM32F407VETX_FLASH.ld b/hw/bsp/stm32f4/boards/stm32f407blackvet/STM32F407VETX_FLASH.ld deleted file mode 100644 index 6dec5543a..000000000 --- a/hw/bsp/stm32f4/boards/stm32f407blackvet/STM32F407VETX_FLASH.ld +++ /dev/null @@ -1,177 +0,0 @@ -/** - ****************************************************************************** - * @file LinkerScript.ld - * @author Auto-generated by STM32CubeIDE - * @brief Linker script for STM32F407VETx Device from STM32F4 series - * 512Kbytes FLASH - * 64Kbytes CCMRAM - * 128Kbytes RAM - * - * Set heap size, stack size and stack location according - * to application requirements. - * - * Set memory bank area and size if external memory is used - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2020 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - -/* Entry Point */ -ENTRY(Reset_Handler) - -/* Highest address of the user mode stack */ -_estack = ORIGIN(RAM) + LENGTH(RAM); /* end of "RAM" Ram type memory */ - -_Min_Heap_Size = 0x200 ; /* required amount of heap */ -_Min_Stack_Size = 0x400 ; /* required amount of stack */ - -/* Memories definition */ -MEMORY -{ - CCMRAM (xrw) : ORIGIN = 0x10000000, LENGTH = 64K - RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 128K - FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 512K -} - -/* Sections */ -SECTIONS -{ - /* The startup code into "FLASH" Rom type memory */ - .isr_vector : - { - . = ALIGN(4); - KEEP(*(.isr_vector)) /* Startup code */ - . = ALIGN(4); - } >FLASH - - /* The program code and other data into "FLASH" Rom type memory */ - .text : - { - . = ALIGN(4); - *(.text) /* .text sections (code) */ - *(.text*) /* .text* sections (code) */ - *(.glue_7) /* glue arm to thumb code */ - *(.glue_7t) /* glue thumb to arm code */ - *(.eh_frame) - - KEEP (*(.init)) - KEEP (*(.fini)) - - . = ALIGN(4); - _etext = .; /* define a global symbols at end of code */ - } >FLASH - - /* Constant data into "FLASH" Rom type memory */ - .rodata : - { - . = ALIGN(4); - *(.rodata) /* .rodata sections (constants, strings, etc.) */ - *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ - . = ALIGN(4); - } >FLASH - - .ARM.extab : { - . = ALIGN(4); - *(.ARM.extab* .gnu.linkonce.armextab.*) - . = ALIGN(4); - } >FLASH - - .ARM : { - . = ALIGN(4); - __exidx_start = .; - *(.ARM.exidx*) - __exidx_end = .; - . = ALIGN(4); - } >FLASH - - .preinit_array : - { - . = ALIGN(4); - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP (*(.preinit_array*)) - PROVIDE_HIDDEN (__preinit_array_end = .); - . = ALIGN(4); - } >FLASH - - .init_array : - { - . = ALIGN(4); - PROVIDE_HIDDEN (__init_array_start = .); - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array*)) - PROVIDE_HIDDEN (__init_array_end = .); - . = ALIGN(4); - } >FLASH - - .fini_array : - { - . = ALIGN(4); - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP (*(SORT(.fini_array.*))) - KEEP (*(.fini_array*)) - PROVIDE_HIDDEN (__fini_array_end = .); - . = ALIGN(4); - } >FLASH - - /* Used by the startup to initialize data */ - _sidata = LOADADDR(.data); - - /* Initialized data sections into "RAM" Ram type memory */ - .data : - { - . = ALIGN(4); - _sdata = .; /* create a global symbol at data start */ - *(.data) /* .data sections */ - *(.data*) /* .data* sections */ - - . = ALIGN(4); - _edata = .; /* define a global symbol at data end */ - - } >RAM AT> FLASH - - /* Uninitialized data section into "RAM" Ram type memory */ - . = ALIGN(4); - .bss : - { - /* This is used by the startup in order to initialize the .bss section */ - _sbss = .; /* define a global symbol at bss start */ - __bss_start__ = _sbss; - *(.bss) - *(.bss*) - *(COMMON) - - . = ALIGN(4); - _ebss = .; /* define a global symbol at bss end */ - __bss_end__ = _ebss; - } >RAM - - /* User_heap_stack section, used to check that there is enough "RAM" Ram type memory left */ - ._user_heap_stack : - { - . = ALIGN(8); - PROVIDE ( end = . ); - PROVIDE ( _end = . ); - . = . + _Min_Heap_Size; - . = . + _Min_Stack_Size; - . = ALIGN(8); - } >RAM - - /* Remove information from the compiler libraries */ - /DISCARD/ : - { - libc.a ( * ) - libm.a ( * ) - libgcc.a ( * ) - } - - .ARM.attributes 0 : { *(.ARM.attributes) } -} diff --git a/hw/bsp/stm32f4/boards/stm32f407blackvet/STM32F407VETx_FLASH.ld b/hw/bsp/stm32f4/boards/stm32f407blackvet/STM32F407VETx_FLASH.ld new file mode 100644 index 000000000..6dec5543a --- /dev/null +++ b/hw/bsp/stm32f4/boards/stm32f407blackvet/STM32F407VETx_FLASH.ld @@ -0,0 +1,177 @@ +/** + ****************************************************************************** + * @file LinkerScript.ld + * @author Auto-generated by STM32CubeIDE + * @brief Linker script for STM32F407VETx Device from STM32F4 series + * 512Kbytes FLASH + * 64Kbytes CCMRAM + * 128Kbytes RAM + * + * Set heap size, stack size and stack location according + * to application requirements. + * + * Set memory bank area and size if external memory is used + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = ORIGIN(RAM) + LENGTH(RAM); /* end of "RAM" Ram type memory */ + +_Min_Heap_Size = 0x200 ; /* required amount of heap */ +_Min_Stack_Size = 0x400 ; /* required amount of stack */ + +/* Memories definition */ +MEMORY +{ + CCMRAM (xrw) : ORIGIN = 0x10000000, LENGTH = 64K + RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 128K + FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 512K +} + +/* Sections */ +SECTIONS +{ + /* The startup code into "FLASH" Rom type memory */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data into "FLASH" Rom type memory */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data into "FLASH" Rom type memory */ + .rodata : + { + . = ALIGN(4); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(4); + } >FLASH + + .ARM.extab : { + . = ALIGN(4); + *(.ARM.extab* .gnu.linkonce.armextab.*) + . = ALIGN(4); + } >FLASH + + .ARM : { + . = ALIGN(4); + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + . = ALIGN(4); + } >FLASH + + .preinit_array : + { + . = ALIGN(4); + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + . = ALIGN(4); + } >FLASH + + .init_array : + { + . = ALIGN(4); + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + . = ALIGN(4); + } >FLASH + + .fini_array : + { + . = ALIGN(4); + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + . = ALIGN(4); + } >FLASH + + /* Used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections into "RAM" Ram type memory */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + + } >RAM AT> FLASH + + /* Uninitialized data section into "RAM" Ram type memory */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss section */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + /* User_heap_stack section, used to check that there is enough "RAM" Ram type memory left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >RAM + + /* Remove information from the compiler libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} diff --git a/hw/bsp/stm32f4/boards/stm32f407blackvet/board.cmake b/hw/bsp/stm32f4/boards/stm32f407blackvet/board.cmake index 52cf95700..64626d7bd 100644 --- a/hw/bsp/stm32f4/boards/stm32f407blackvet/board.cmake +++ b/hw/bsp/stm32f4/boards/stm32f407blackvet/board.cmake @@ -2,17 +2,12 @@ set(MCU_VARIANT stm32f407xx) set(JLINK_DEVICE stm32f407ve) set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32F407VETx_FLASH.ld) -set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf) - -set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s) -set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s) function(update_board TARGET) target_compile_definitions(${TARGET} PUBLIC STM32F407xx HSE_VALUE=8000000 - CORE_CM4 - BOARD_TUD_RHPORT=0 - BOARD_TUD_MAX_SPEED=OPT_MODE_FULL_SPEED + BOARD_TUD_RHPORT=0 + BOARD_TUD_MAX_SPEED=OPT_MODE_FULL_SPEED ) endfunction() diff --git a/hw/bsp/stm32f4/boards/stm32f407disco/board.cmake b/hw/bsp/stm32f4/boards/stm32f407disco/board.cmake new file mode 100644 index 000000000..c8f0330ed --- /dev/null +++ b/hw/bsp/stm32f4/boards/stm32f407disco/board.cmake @@ -0,0 +1,10 @@ +set(MCU_VARIANT stm32f407xx) +set(JLINK_DEVICE stm32f407vg) + +set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32F407VGTx_FLASH.ld) + +function(update_board TARGET) + target_compile_definitions(${TARGET} PUBLIC + STM32F407xx + ) +endfunction() diff --git a/hw/bsp/stm32f4/boards/stm32f411blackpill/board.cmake b/hw/bsp/stm32f4/boards/stm32f411blackpill/board.cmake new file mode 100644 index 000000000..d16db508f --- /dev/null +++ b/hw/bsp/stm32f4/boards/stm32f411blackpill/board.cmake @@ -0,0 +1,10 @@ +set(MCU_VARIANT stm32f411xe) +set(JLINK_DEVICE stm32f411ce) + +set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32F411CEUx_FLASH.ld) + +function(update_board TARGET) + target_compile_definitions(${TARGET} PUBLIC + STM32F411xE + ) +endfunction() diff --git a/hw/bsp/stm32f4/boards/stm32f411disco/board.cmake b/hw/bsp/stm32f4/boards/stm32f411disco/board.cmake new file mode 100644 index 000000000..d7c32c27d --- /dev/null +++ b/hw/bsp/stm32f4/boards/stm32f411disco/board.cmake @@ -0,0 +1,10 @@ +set(MCU_VARIANT stm32f411xe) +set(JLINK_DEVICE stm32f411ve) + +set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32F411VETx_FLASH.ld) + +function(update_board TARGET) + target_compile_definitions(${TARGET} PUBLIC + STM32F411xE + ) +endfunction() diff --git a/hw/bsp/stm32f4/boards/stm32f412disco/board.cmake b/hw/bsp/stm32f4/boards/stm32f412disco/board.cmake new file mode 100644 index 000000000..805332db8 --- /dev/null +++ b/hw/bsp/stm32f4/boards/stm32f412disco/board.cmake @@ -0,0 +1,10 @@ +set(MCU_VARIANT stm32f412zx) +set(JLINK_DEVICE stm32f412zg) + +set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32F412ZGTx_FLASH.ld) + +function(update_board TARGET) + target_compile_definitions(${TARGET} PUBLIC + STM32F412Zx + ) +endfunction() diff --git a/hw/bsp/stm32f4/boards/stm32f412nucleo/board.cmake b/hw/bsp/stm32f4/boards/stm32f412nucleo/board.cmake new file mode 100644 index 000000000..805332db8 --- /dev/null +++ b/hw/bsp/stm32f4/boards/stm32f412nucleo/board.cmake @@ -0,0 +1,10 @@ +set(MCU_VARIANT stm32f412zx) +set(JLINK_DEVICE stm32f412zg) + +set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32F412ZGTx_FLASH.ld) + +function(update_board TARGET) + target_compile_definitions(${TARGET} PUBLIC + STM32F412Zx + ) +endfunction() diff --git a/hw/bsp/stm32f4/boards/stm32f439nucleo/board.cmake b/hw/bsp/stm32f4/boards/stm32f439nucleo/board.cmake new file mode 100644 index 000000000..31ec6f700 --- /dev/null +++ b/hw/bsp/stm32f4/boards/stm32f439nucleo/board.cmake @@ -0,0 +1,10 @@ +set(MCU_VARIANT stm32f439xx) +set(JLINK_DEVICE stm32f439zi) + +set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/STM32F439ZITX_FLASH.ld) + +function(update_board TARGET) + target_compile_definitions(${TARGET} PUBLIC + STM32F439xx + ) +endfunction() diff --git a/hw/bsp/stm32f4/family.c b/hw/bsp/stm32f4/family.c index 41803e0ce..2a599e5c4 100644 --- a/hw/bsp/stm32f4/family.c +++ b/hw/bsp/stm32f4/family.c @@ -31,13 +31,11 @@ //--------------------------------------------------------------------+ // Forward USB interrupt events to TinyUSB IRQ Handler //--------------------------------------------------------------------+ -void OTG_FS_IRQHandler(void) -{ +void OTG_FS_IRQHandler(void) { tud_int_handler(0); } -void OTG_HS_IRQHandler(void) -{ +void OTG_HS_IRQHandler(void) { tud_int_handler(1); } @@ -46,8 +44,7 @@ void OTG_HS_IRQHandler(void) //--------------------------------------------------------------------+ UART_HandleTypeDef UartHandle; -void board_init(void) -{ +void board_init(void) { board_clock_init(); //SystemCoreClockUpdate(); @@ -62,7 +59,7 @@ void board_init(void) NVIC_SetPriority(OTG_FS_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); #endif - GPIO_InitTypeDef GPIO_InitStruct; + GPIO_InitTypeDef GPIO_InitStruct; // LED GPIO_InitStruct.Pin = LED_PIN; @@ -82,22 +79,22 @@ void board_init(void) #ifdef UART_DEV // UART - GPIO_InitStruct.Pin = UART_TX_PIN | UART_RX_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Pull = GPIO_PULLUP; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + GPIO_InitStruct.Pin = UART_TX_PIN | UART_RX_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_PULLUP; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; GPIO_InitStruct.Alternate = UART_GPIO_AF; HAL_GPIO_Init(UART_GPIO_PORT, &GPIO_InitStruct); - UartHandle = (UART_HandleTypeDef){ - .Instance = UART_DEV, - .Init.BaudRate = CFG_BOARD_UART_BAUDRATE, - .Init.WordLength = UART_WORDLENGTH_8B, - .Init.StopBits = UART_STOPBITS_1, - .Init.Parity = UART_PARITY_NONE, - .Init.HwFlowCtl = UART_HWCONTROL_NONE, - .Init.Mode = UART_MODE_TX_RX, - .Init.OverSampling = UART_OVERSAMPLING_16 + UartHandle = (UART_HandleTypeDef) { + .Instance = UART_DEV, + .Init.BaudRate = CFG_BOARD_UART_BAUDRATE, + .Init.WordLength = UART_WORDLENGTH_8B, + .Init.StopBits = UART_STOPBITS_1, + .Init.Parity = UART_PARITY_NONE, + .Init.HwFlowCtl = UART_HWCONTROL_NONE, + .Init.Mode = UART_MODE_TX_RX, + .Init.OverSampling = UART_OVERSAMPLING_16 }; HAL_UART_Init(&UartHandle); #endif @@ -148,27 +145,37 @@ void board_init(void) // Board porting API //--------------------------------------------------------------------+ -void board_led_write(bool state) -{ - GPIO_PinState pin_state = (GPIO_PinState) (state ? LED_STATE_ON : (1-LED_STATE_ON)); +void board_led_write(bool state) { + GPIO_PinState pin_state = (GPIO_PinState) (state ? LED_STATE_ON : (1 - LED_STATE_ON)); HAL_GPIO_WritePin(LED_PORT, LED_PIN, pin_state); } -uint32_t board_button_read(void) -{ +uint32_t board_button_read(void) { return BUTTON_STATE_ACTIVE == HAL_GPIO_ReadPin(BUTTON_PORT, BUTTON_PIN); } -int board_uart_read(uint8_t* buf, int len) -{ - (void) buf; (void) len; +size_t board_get_unique_id(uint8_t id[], size_t max_len) { + (void) max_len; + volatile uint32_t *stm32_uuid = (volatile uint32_t *) UID_BASE; + uint32_t *id32 = (uint32_t *) (uintptr_t) id; + uint8_t const len = 12; + + id32[0] = stm32_uuid[0]; + id32[1] = stm32_uuid[1]; + id32[2] = stm32_uuid[2]; + + return len; +} + +int board_uart_read(uint8_t *buf, int len) { + (void) buf; + (void) len; return 0; } -int board_uart_write(void const * buf, int len) -{ +int board_uart_write(void const *buf, int len) { #ifdef UART_DEV - HAL_UART_Transmit(&UartHandle, (uint8_t*)(uintptr_t) buf, len, 0xffff); + HAL_UART_Transmit(&UartHandle, (uint8_t *) (uintptr_t) buf, len, 0xffff); return len; #else (void) buf; (void) len; (void) UartHandle; @@ -176,28 +183,25 @@ int board_uart_write(void const * buf, int len) #endif } -#if CFG_TUSB_OS == OPT_OS_NONE +#if CFG_TUSB_OS == OPT_OS_NONE volatile uint32_t system_ticks = 0; -void SysTick_Handler (void) -{ + +void SysTick_Handler(void) { HAL_IncTick(); system_ticks++; } -uint32_t board_millis(void) -{ +uint32_t board_millis(void) { return system_ticks; } + #endif -void HardFault_Handler (void) -{ +void HardFault_Handler(void) { __asm("BKPT #0\n"); } // Required by __libc_init_array in startup code if we are compiling using // -nostdlib/-nostartfiles. -void _init(void) -{ - +void _init(void) { } diff --git a/hw/bsp/stm32f4/family.cmake b/hw/bsp/stm32f4/family.cmake index a2f36a9e8..cad504bac 100644 --- a/hw/bsp/stm32f4/family.cmake +++ b/hw/bsp/stm32f4/family.cmake @@ -20,58 +20,58 @@ set(CMAKE_TOOLCHAIN_FILE ${TOP}/tools/cmake/toolchain/arm_${TOOLCHAIN}.cmake) set(FAMILY_MCUS STM32F4 CACHE INTERNAL "") -# enable LTO if supported -include(CheckIPOSupported) -check_ipo_supported(RESULT IPO_SUPPORTED) -if (IPO_SUPPORTED) - set(CMAKE_INTERPROCEDURAL_OPTIMIZATION TRUE) -endif () - #------------------------------------ # BOARD_TARGET #------------------------------------ # only need to be built ONCE for all examples function(add_board_target BOARD_TARGET) - if (NOT TARGET ${BOARD_TARGET}) - add_library(${BOARD_TARGET} STATIC - ${ST_CMSIS}/Source/Templates/system_${ST_PREFIX}.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_cortex.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_pwr_ex.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc_ex.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_dma.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_gpio.c - ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart.c - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} - ) - target_include_directories(${BOARD_TARGET} PUBLIC - ${CMAKE_CURRENT_FUNCTION_LIST_DIR} - ${CMSIS_5}/CMSIS/Core/Include - ${ST_CMSIS}/Include - ${ST_HAL_DRIVER}/Inc - ) - target_compile_options(${BOARD_TARGET} PUBLIC + if (TARGET ${BOARD_TARGET}) + return() + endif () + + # Startup & Linker script + set(STARTUP_FILE_GNU ${ST_CMSIS}/Source/Templates/gcc/startup_${MCU_VARIANT}.s) + set(STARTUP_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/startup_${MCU_VARIANT}.s) + set(LD_FILE_IAR ${ST_CMSIS}/Source/Templates/iar/linker/${MCU_VARIANT}_flash.icf) + + add_library(${BOARD_TARGET} STATIC + ${ST_CMSIS}/Source/Templates/system_${ST_PREFIX}.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_cortex.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_dma.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_gpio.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_pwr_ex.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_rcc_ex.c + ${ST_HAL_DRIVER}/Src/${ST_PREFIX}_hal_uart.c + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} + ) + target_include_directories(${BOARD_TARGET} PUBLIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${CMSIS_5}/CMSIS/Core/Include + ${ST_CMSIS}/Include + ${ST_HAL_DRIVER}/Inc + ) + target_compile_options(${BOARD_TARGET} PUBLIC + ) + target_compile_definitions(${BOARD_TARGET} PUBLIC + ) + + update_board(${BOARD_TARGET}) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -nostartfiles + # nanolib + --specs=nosys.specs + --specs=nano.specs ) - target_compile_definitions(${BOARD_TARGET} PUBLIC + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" ) - - update_board(${BOARD_TARGET}) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - -nostartfiles - # nanolib - --specs=nosys.specs - --specs=nano.specs - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--config=${LD_FILE_IAR}" - ) - endif () endif () endfunction() @@ -82,7 +82,6 @@ endfunction() function(family_configure_example TARGET RTOS) family_configure_common(${TARGET} ${RTOS}) - # Board target add_board_target(board_${BOARD}) @@ -102,15 +101,9 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_STM32F4 ${RTOS}) - if (MCU_VARIANT STREQUAL "stm32f407xx") - target_sources(${TARGET}-tinyusb PUBLIC - ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c - ) - else() - target_sources(${TARGET}-tinyusb PUBLIC - ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c - ) - endif() + target_sources(${TARGET}-tinyusb PUBLIC + ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c + ) target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) # Link dependencies @@ -120,16 +113,3 @@ function(family_configure_example TARGET RTOS) family_flash_stlink(${TARGET}) family_flash_jlink(${TARGET}) endfunction() - - -function(family_configure_device_example TARGET) - family_configure_example(${TARGET}) -endfunction() - -function(family_configure_host_example TARGET) - family_configure_example(${TARGET}) -endfunction() - -function(family_configure_dual_usb_example TARGET) - family_configure_example(${TARGET}) -endfunction() -- cgit v1.3.1 From 3c746e8bb0baa85a969228fd15e988425e83b00e Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 4 Aug 2023 21:33:44 +0700 Subject: add usb serial for hw l412 test --- .github/workflows/build_iar.yml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to '.github') diff --git a/.github/workflows/build_iar.yml b/.github/workflows/build_iar.yml index 4b170f2bd..454ad12fe 100644 --- a/.github/workflows/build_iar.yml +++ b/.github/workflows/build_iar.yml @@ -93,7 +93,7 @@ jobs: echo >> flash.sh 'echo r >> flash.jlink' echo >> flash.sh 'echo go >> flash.jlink' echo >> flash.sh 'echo exit >> flash.jlink' - echo >> flash.sh 'cmdout=$(JLinkExe -device stm32l412kb -if swd -JTAGConf -1,-1 -speed auto -NoGui 1 -ExitOnError 1 -CommandFile flash.jlink)' + echo >> flash.sh 'cmdout=$(JLinkExe -USB 774470029 -device stm32l412kb -if swd -JTAGConf -1,-1 -speed auto -NoGui 1 -ExitOnError 1 -CommandFile flash.jlink)' echo >> flash.sh 'if (( $? )) ; then echo $cmdout ; fi' chmod +x flash.sh -- cgit v1.3.1 From 1268d1a0937a1a7c9d7b20b17581a82f233d066d Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 9 Aug 2023 18:46:23 +0700 Subject: update hil test and json (remove troublesome lpc54608), run hil test on ci with IAR build --- .github/workflows/build_iar.yml | 151 ++++++++++++------------ .idea/cmake.xml | 1 - examples/device/CMakeLists.txt | 1 + hw/bsp/lpc55/boards/lpcxpresso55s69/board.cmake | 2 +- test/hitl/hitl_hfp.json | 84 +------------ test/hitl/hitl_test.py | 84 +++++++++---- 6 files changed, 147 insertions(+), 176 deletions(-) (limited to '.github') diff --git a/.github/workflows/build_iar.yml b/.github/workflows/build_iar.yml index 454ad12fe..a62e62b79 100644 --- a/.github/workflows/build_iar.yml +++ b/.github/workflows/build_iar.yml @@ -32,7 +32,7 @@ jobs: # Alphabetical order # Note: bundle multiple families into a matrix since there is only one self-hosted instance can # run IAR build. Too many matrix can hurt due to setup/teardown overhead. - - 'stm32f0 stm32f1 stm32f7 stm32g0 stm32g4 stm32h7 stm32l4' + - 'stm32f0 stm32f1 stm32f4 stm32f7 stm32g0 stm32g4 stm32h7 stm32l4' steps: - name: Clean workspace run: | @@ -49,82 +49,85 @@ jobs: - name: Build run: python3 tools/build_cmake.py ${{ matrix.family }} -DTOOLCHAIN=iar -DCMAKE_BUILD_TYPE=MinSizeRel - # Upload binaries for hardware test with self-hosted - - name: Prepare stm32l412nucleo Artifacts - if: contains(matrix.family, 'stm32l4') - working-directory: ${{github.workspace}}/cmake-build/cmake-build-stm32l412nucleo + - name: Test on actual hardware (hardware in the loop) run: | - find device/ -name "*.elf" -exec mv {} ../../ \; - - - name: Upload Artifacts for stm32l412nucleo - if: contains(matrix.family, 'stm32l4') && github.repository_owner == 'hathach' - uses: actions/upload-artifact@v3 - with: - name: stm32l4 - path: | - *.elf + python3 tools/hitl_test.py hitl_hfp.json + +# # Upload binaries for hardware test with self-hosted +# - name: Prepare stm32l412nucleo Artifacts +# if: contains(matrix.family, 'stm32l4') +# working-directory: ${{github.workspace}}/cmake-build/cmake-build-stm32l412nucleo +# run: | +# find device/ -name "*.elf" -exec mv {} ../../ \; +# +# - name: Upload Artifacts for stm32l412nucleo +# if: contains(matrix.family, 'stm32l4') && github.repository_owner == 'hathach' +# uses: actions/upload-artifact@v3 +# with: +# name: stm32l4 +# path: | +# *.elf # --------------------------------------- # Hardware in the loop (HIL) # Current self-hosted instance is running on an EPYC 7232 server hosted by HiFiPhile user - # - STM32L412 Nucleo with on-board jlink as ttyACM0 # --------------------------------------- - hw-stm32l412nucleo-test: - needs: cmake - runs-on: [self-hosted, Linux, X64, hifiphile] - - steps: - - name: Clean workspace - run: | - echo "Cleaning up previous run" - rm -rf "${{ github.workspace }}" - mkdir -p "${{ github.workspace }}" - - - name: Download stm32l4 Artifacts - uses: actions/download-artifact@v3 - with: - name: stm32l4 - - - name: Create flash.sh - run: | - echo > flash.sh 'echo halt > flash.jlink' - echo >> flash.sh 'echo r >> flash.jlink' - echo >> flash.sh 'echo loadfile $1 >> flash.jlink' - echo >> flash.sh 'echo r >> flash.jlink' - echo >> flash.sh 'echo go >> flash.jlink' - echo >> flash.sh 'echo exit >> flash.jlink' - echo >> flash.sh 'cmdout=$(JLinkExe -USB 774470029 -device stm32l412kb -if swd -JTAGConf -1,-1 -speed auto -NoGui 1 -ExitOnError 1 -CommandFile flash.jlink)' - echo >> flash.sh 'if (( $? )) ; then echo $cmdout ; fi' - chmod +x flash.sh - - - name: Test cdc_dual_ports - run: | - ./flash.sh cdc_dual_ports.elf - while (! ([ -e /dev/ttyACM1 ] && [ -e /dev/ttyACM2 ])) && [ $SECONDS -le 10 ]; do :; done - test -e /dev/ttyACM1 && echo "ttyACM1 exists" - test -e /dev/ttyACM2 && echo "ttyACM2 exists" - - # Debian does not auto mount usb drive. skip this test for now - - name: Test cdc_msc - if: false - run: | - ./flash.sh cdc_msc.elf - readme='/media/pi/TinyUSB MSC/README.TXT' - while (! ([ -e /dev/ttyACM1 ] && [ -f "$readme" ])) && [ $SECONDS -le 10 ]; do :; done - test -e /dev/ttyACM1 && echo "ttyACM1 exists" - test -f "$readme" && echo "$readme exists" - cat "$readme" - - - name: Test dfu - run: | - ./flash.sh dfu.elf - while (! (dfu-util -l | grep "Found DFU")) && [ $SECONDS -le 10 ]; do :; done - dfu-util -d cafe -a 0 -U dfu0 - dfu-util -d cafe -a 1 -U dfu1 - grep "TinyUSB DFU! - Partition 0" dfu0 - grep "TinyUSB DFU! - Partition 1" dfu1 - - - name: Test dfu_runtime - run: | - ./flash.sh dfu_runtime.elf - while (! (dfu-util -l | grep "Found Runtime")) && [ $SECONDS -le 10 ]; do :; done +# hw-stm32l412nucleo-test: +# needs: cmake +# runs-on: [self-hosted, Linux, X64, hifiphile] +# +# steps: +# - name: Clean workspace +# run: | +# echo "Cleaning up previous run" +# rm -rf "${{ github.workspace }}" +# mkdir -p "${{ github.workspace }}" +# +# - name: Download stm32l4 Artifacts +# uses: actions/download-artifact@v3 +# with: +# name: stm32l4 +# +# - name: Create flash.sh +# run: | +# echo > flash.sh 'echo halt > flash.jlink' +# echo >> flash.sh 'echo r >> flash.jlink' +# echo >> flash.sh 'echo loadfile $1 >> flash.jlink' +# echo >> flash.sh 'echo r >> flash.jlink' +# echo >> flash.sh 'echo go >> flash.jlink' +# echo >> flash.sh 'echo exit >> flash.jlink' +# echo >> flash.sh 'cmdout=$(JLinkExe -USB 774470029 -device stm32l412kb -if swd -JTAGConf -1,-1 -speed auto -NoGui 1 -ExitOnError 1 -CommandFile flash.jlink)' +# echo >> flash.sh 'if (( $? )) ; then echo $cmdout ; fi' +# chmod +x flash.sh +# +# - name: Test cdc_dual_ports +# run: | +# ./flash.sh cdc_dual_ports.elf +# while (! ([ -e /dev/ttyACM1 ] && [ -e /dev/ttyACM2 ])) && [ $SECONDS -le 10 ]; do :; done +# test -e /dev/ttyACM1 && echo "ttyACM1 exists" +# test -e /dev/ttyACM2 && echo "ttyACM2 exists" +# +# # Debian does not auto mount usb drive. skip this test for now +# - name: Test cdc_msc +# if: false +# run: | +# ./flash.sh cdc_msc.elf +# readme='/media/pi/TinyUSB MSC/README.TXT' +# while (! ([ -e /dev/ttyACM1 ] && [ -f "$readme" ])) && [ $SECONDS -le 10 ]; do :; done +# test -e /dev/ttyACM1 && echo "ttyACM1 exists" +# test -f "$readme" && echo "$readme exists" +# cat "$readme" +# +# - name: Test dfu +# run: | +# ./flash.sh dfu.elf +# while (! (dfu-util -l | grep "Found DFU")) && [ $SECONDS -le 10 ]; do :; done +# dfu-util -d cafe -a 0 -U dfu0 +# dfu-util -d cafe -a 1 -U dfu1 +# grep "TinyUSB DFU! - Partition 0" dfu0 +# grep "TinyUSB DFU! - Partition 1" dfu1 +# +# - name: Test dfu_runtime +# run: | +# ./flash.sh dfu_runtime.elf +# while (! (dfu-util -l | grep "Found Runtime")) && [ $SECONDS -le 10 ]; do :; done diff --git a/.idea/cmake.xml b/.idea/cmake.xml index 4a69d02cf..8ee7f09a0 100644 --- a/.idea/cmake.xml +++ b/.idea/cmake.xml @@ -52,7 +52,6 @@ - \ No newline at end of file diff --git a/examples/device/CMakeLists.txt b/examples/device/CMakeLists.txt index f590fff3f..0a2e49ef0 100644 --- a/examples/device/CMakeLists.txt +++ b/examples/device/CMakeLists.txt @@ -17,6 +17,7 @@ family_add_subdirectory(cdc_uac2) family_add_subdirectory(dfu) family_add_subdirectory(dfu_runtime) family_add_subdirectory(dynamic_configuration) +family_add_subdirectory(hid_boot_interface) family_add_subdirectory(hid_composite) family_add_subdirectory(hid_composite_freertos) family_add_subdirectory(hid_generic_inout) diff --git a/hw/bsp/lpc55/boards/lpcxpresso55s69/board.cmake b/hw/bsp/lpc55/boards/lpcxpresso55s69/board.cmake index 3af6034ad..b52ec2f9d 100644 --- a/hw/bsp/lpc55/boards/lpcxpresso55s69/board.cmake +++ b/hw/bsp/lpc55/boards/lpcxpresso55s69/board.cmake @@ -1,7 +1,7 @@ set(MCU_VARIANT LPC55S69) set(MCU_CORE LPC55S69_cm33_core0) -set(JLINK_DEVICE LPC55S69) +set(JLINK_DEVICE LPC55S69_M33_0) set(PYOCD_TARGET LPC55S69) set(NXPLINK_DEVICE LPC55S69:LPCXpresso55S69) diff --git a/test/hitl/hitl_hfp.json b/test/hitl/hitl_hfp.json index 866e5233f..7912af245 100644 --- a/test/hitl/hitl_hfp.json +++ b/test/hitl/hitl_hfp.json @@ -1,92 +1,18 @@ { - "devices": [ + "boards": [ { + "name": "stm32l412nucleo", "uid": "41003B000E504E5457323020", "debugger": "jlink", "debugger_sn": "774470029", - "device": "STM32L412KB", - "tests": [ - { - "name": "cdc_dual_ports", - "firmware": "examples/device/cdc_dual_ports/_build/stm32l412nucleo/cdc_dual_ports.elf" - }, - { - "name": "cdc_msc", - "firmware": "examples/device/cdc_msc/_build/stm32l412nucleo/cdc_msc.elf" - }, - { - "name": "dfu", - "firmware": "examples/device/dfu/_build/stm32l412nucleo/dfu.elf" - }, - { - "name": "dfu_runtime", - "firmware": "examples/device/dfu_runtime/_build/stm32l412nucleo/dfu_runtime.elf" - }, - { - "name": "hid_boot_interface", - "firmware": "examples/device/hid_boot_interface/_build/stm32l412nucleo/hid_boot_interface.elf" - }, - { - "name": "board_test", - "firmware": "examples/device/board_test/_build/stm32l412nucleo/board_test.elf" - } - ] + "cpu": "STM32L412KB" }, { + "name": "stm32f746disco", "uid": "210041000C51343237303334", "debugger": "jlink", "debugger_sn": "770935966", - "device": "STM32F746NG", - "tests": [ - { - "name": "cdc_dual_ports", - "firmware": "examples/device/cdc_dual_ports/_build/stm32f746disco/cdc_dual_ports.elf" - }, - { - "name": "cdc_msc", - "firmware": "examples/device/cdc_msc/_build/stm32f746disco/cdc_msc.elf" - }, - { - "name": "dfu", - "firmware": "examples/device/dfu/_build/stm32f746disco/dfu.elf" - }, - { - "name": "dfu_runtime", - "firmware": "examples/device/dfu_runtime/_build/stm32f746disco/dfu_runtime.elf" - }, - { - "name": "hid_boot_interface", - "firmware": "examples/device/hid_boot_interface/_build/stm32f746disco/hid_boot_interface.elf" - }, - { - "name": "board_test", - "firmware": "examples/device/board_test/_build/stm32f746disco/board_test.elf" - } - ] - }, - { - "uid": "0123456789ABCDEF", - "debugger": "jlink", - "debugger_sn": "727600775", - "device": "LPC54608J512", - "tests": [ - { - "name": "cdc_dual_ports", - "firmware": "examples/device/cdc_dual_ports/_build/lpcxpresso54628/cdc_dual_ports.elf" - }, - { - "name": "dfu", - "firmware": "examples/device/dfu/_build/lpcxpresso54628/dfu.elf" - }, - { - "name": "dfu_runtime", - "firmware": "examples/device/dfu_runtime/_build/lpcxpresso54628/dfu_runtime.elf" - }, - { - "name": "board_test", - "firmware": "examples/device/board_test/_build/lpcxpresso54628/board_test.elf" - } - ] + "cpu": "STM32F746NG" } ] } diff --git a/test/hitl/hitl_test.py b/test/hitl/hitl_test.py index 695c6a28c..6bcde36c6 100644 --- a/test/hitl/hitl_test.py +++ b/test/hitl/hitl_test.py @@ -32,6 +32,21 @@ import serial import subprocess import json + +def get_serial_dev(id, product, ifnum): + # get usb serial by id + return f'/dev/serial/by-id/usb-TinyUSB_{product}_{id}-if{ifnum:02d}' + + +def get_disk_dev(id, lun): + # get usb disk by id + return f'/dev/disk/by-id/usb-TinyUSB_Mass_Storage_{id}-0:{lun}' + + +def get_hid_dev(id, product, event): + return f'/dev/input/by-id/usb-TinyUSB_{product}_{id}-{event}' + + def flash_jlink(sn, dev, firmware): script = ['halt', 'r', f'loadfile {firmware}', 'r', 'go', 'exit'] f = open('flash.jlink', 'w') @@ -43,9 +58,15 @@ def flash_jlink(sn, dev, firmware): os.remove('flash.jlink') assert ret.returncode == 0, 'Flash failed\n' + stdout + +def test_board_test(id): + # Dummy test + pass + def test_cdc_dual_ports(id): - port1 = f'/dev/ttyUSB_{id[-8:]}.00' - port2 = f'/dev/ttyUSB_{id[-8:]}.02' + port1 = get_serial_dev(id, "TinyUSB_Device", 0) + port2 = get_serial_dev(id, "TinyUSB_Device", 2) + # Wait device enum timeout = 10 while timeout: @@ -75,10 +96,9 @@ def test_cdc_dual_ports(id): assert ser1.read(100) == str2.lower(), 'Port1 wrong data' assert ser2.read(100) == str2.upper(), 'Port2 wrong data' - print('cdc_dual_ports test done') def test_cdc_msc(id): - port = f'/dev/ttyUSB_{id[-8:]}.00' + port = get_serial_dev(id, "TinyUSB_Device", 0) file = f'/media/blkUSB_{id[-8:]}.02/README.TXT' # Wait device enum timeout = 10 @@ -110,7 +130,6 @@ If you find any bugs or get any questions, feel free to file an\r\n\ issue at github.com/hathach/tinyusb" assert data == readme, 'MSC wrong data' - print('cdc_msc test done') def test_dfu(id): # Wait device enum @@ -150,7 +169,6 @@ def test_dfu(id): os.remove('dfu0') os.remove('dfu1') - print('dfu test done') def test_dfu_runtime(id): # Wait device enum @@ -166,12 +184,11 @@ def test_dfu_runtime(id): assert timeout, 'Device not available' - print('dfu_runtime test done') def test_hid_boot_interface(id): - kbd = f'/dev/input/by-id/usb-TinyUSB_TinyUSB_Device_{id}-event-kbd' - mouse1 = f'/dev/input/by-id/usb-TinyUSB_TinyUSB_Device_{id}-if01-event-mouse' - mouse2 = f'/dev/input/by-id/usb-TinyUSB_TinyUSB_Device_{id}-if01-mouse' + kbd = get_hid_dev(id, 'TinyUSB_Device', 'event-kbd') + mouse1 = get_hid_dev(id, 'TinyUSB_Device', 'if01-event-mouse') + mouse2 = get_hid_dev(id, 'TinyUSB_Device', 'if01-mouse') # Wait device enum timeout = 10 while timeout: @@ -182,11 +199,6 @@ def test_hid_boot_interface(id): assert timeout, 'Device not available' - print('hid_boot_interface test done') - -def test_board_test(id): - # Dummy test - pass if __name__ == '__main__': if len(sys.argv) != 2: @@ -197,12 +209,42 @@ if __name__ == '__main__': with open(f'{os.path.dirname(__file__)}/{sys.argv[1]}') as f: config = json.load(f) - for device in config['devices']: - print(f"Testing device:{device['device']}") - for test in device['tests']: - if device['debugger'].lower() == 'jlink': - flash_jlink(device['debugger_sn'], device['device'], test['firmware']) + # all possible tests, board_test is last to disable board's usb + all_tests = [ + 'cdc_dual_ports', 'cdc_msc', 'dfu', 'dfu_runtime', 'hid_boot_interface', 'board_test' + ] + + for board in config['boards']: + print(f'Testing board:{board["name"]}') + + # default to all tests + if 'tests' in board: + test_list = board['tests'] + else: + test_list = all_tests + + # remove skip_tests + if 'tests_skip' in board: + for skip in board['tests_skip']: + if skip in test_list: + test_list.remove(skip) + + for test in test_list: + mk_elf = f'examples/device/{test}/_build/{board["name"]}/{test}.elf' + cmake_elf = f'cmake-build/cmake-build-{board["name"]}/device/{test}/{test}.elf' + if os.path.isfile(cmake_elf): + elf = cmake_elf + elif os.path.isfile(mk_elf): + elf = mk_elf + else: + print(f'Cannot find firmware file for {test}') + sys.exit(-1) + + if board['debugger'].lower() == 'jlink': + flash_jlink(board['debugger_sn'], board['cpu'], elf) else: # ToDo pass - locals()[f'test_{test["name"]}'](device['uid']) + print(f' {test} ...', end='') + locals()[f'test_{test}'](board['uid']) + print('OK') -- cgit v1.3.1 From 8e690df1da3b542988b9ec093f3ce03c8cfd9248 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 9 Aug 2023 19:03:56 +0700 Subject: rename hitl to hil --- .github/workflows/build_iar.yml | 2 +- test/hil/hil_hfp.json | 18 +++ test/hil/hil_test.py | 250 ++++++++++++++++++++++++++++++++++++++++ test/hitl/hitl_hfp.json | 18 --- test/hitl/hitl_test.py | 250 ---------------------------------------- 5 files changed, 269 insertions(+), 269 deletions(-) create mode 100644 test/hil/hil_hfp.json create mode 100644 test/hil/hil_test.py delete mode 100644 test/hitl/hitl_hfp.json delete mode 100644 test/hitl/hitl_test.py (limited to '.github') diff --git a/.github/workflows/build_iar.yml b/.github/workflows/build_iar.yml index a62e62b79..48fdd6a8a 100644 --- a/.github/workflows/build_iar.yml +++ b/.github/workflows/build_iar.yml @@ -51,7 +51,7 @@ jobs: - name: Test on actual hardware (hardware in the loop) run: | - python3 tools/hitl_test.py hitl_hfp.json + python3 test/hil/hil_test.py hil_hfp.json # # Upload binaries for hardware test with self-hosted # - name: Prepare stm32l412nucleo Artifacts diff --git a/test/hil/hil_hfp.json b/test/hil/hil_hfp.json new file mode 100644 index 000000000..7912af245 --- /dev/null +++ b/test/hil/hil_hfp.json @@ -0,0 +1,18 @@ +{ + "boards": [ + { + "name": "stm32l412nucleo", + "uid": "41003B000E504E5457323020", + "debugger": "jlink", + "debugger_sn": "774470029", + "cpu": "STM32L412KB" + }, + { + "name": "stm32f746disco", + "uid": "210041000C51343237303334", + "debugger": "jlink", + "debugger_sn": "770935966", + "cpu": "STM32F746NG" + } + ] +} diff --git a/test/hil/hil_test.py b/test/hil/hil_test.py new file mode 100644 index 000000000..6bcde36c6 --- /dev/null +++ b/test/hil/hil_test.py @@ -0,0 +1,250 @@ +# +# The MIT License (MIT) +# +# Copyright (c) 2023 HiFiPhile +# +# Permission is hereby granted, free of charge, to any person obtaining a copy +# of this software and associated documentation files (the "Software"), to deal +# in the Software without restriction, including without limitation the rights +# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +# copies of the Software, and to permit persons to whom the Software is +# furnished to do so, subject to the following conditions: +# +# The above copyright notice and this permission notice shall be included in +# all copies or substantial portions of the Software. +# +# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN +# THE SOFTWARE. + +# udev rules : +# ACTION=="add", SUBSYSTEM=="tty", SUBSYSTEMS=="usb", MODE="0666", PROGRAM="/bin/sh -c 'echo $$ID_SERIAL_SHORT | rev | cut -c -8 | rev'", SYMLINK+="ttyUSB_%c.%s{bInterfaceNumber}" +# ACTION=="add", SUBSYSTEM=="block", SUBSYSTEMS=="usb", ENV{ID_FS_USAGE}=="filesystem", MODE="0666", PROGRAM="/bin/sh -c 'echo $$ID_SERIAL_SHORT | rev | cut -c -8 | rev'", RUN{program}+="/usr/bin/systemd-mount --no-block --automount=yes --collect $devnode /media/blkUSB_%c.%s{bInterfaceNumber}" + +import os +import sys +import time +import serial +import subprocess +import json + + +def get_serial_dev(id, product, ifnum): + # get usb serial by id + return f'/dev/serial/by-id/usb-TinyUSB_{product}_{id}-if{ifnum:02d}' + + +def get_disk_dev(id, lun): + # get usb disk by id + return f'/dev/disk/by-id/usb-TinyUSB_Mass_Storage_{id}-0:{lun}' + + +def get_hid_dev(id, product, event): + return f'/dev/input/by-id/usb-TinyUSB_{product}_{id}-{event}' + + +def flash_jlink(sn, dev, firmware): + script = ['halt', 'r', f'loadfile {firmware}', 'r', 'go', 'exit'] + f = open('flash.jlink', 'w') + f.writelines(f'{s}\n' for s in script) + f.close() + ret = subprocess.run(f'JLinkExe -USB {sn} -device {dev} -if swd -JTAGConf -1,-1 -speed auto -NoGui 1 -ExitOnError 1 -CommandFile flash.jlink', + shell=True, stdout=subprocess.PIPE, stderr=subprocess.STDOUT) + stdout = ret.stdout.decode() + os.remove('flash.jlink') + assert ret.returncode == 0, 'Flash failed\n' + stdout + + +def test_board_test(id): + # Dummy test + pass + +def test_cdc_dual_ports(id): + port1 = get_serial_dev(id, "TinyUSB_Device", 0) + port2 = get_serial_dev(id, "TinyUSB_Device", 2) + + # Wait device enum + timeout = 10 + while timeout: + if os.path.exists(port1) and os.path.exists(port2): + break + time.sleep(1) + timeout = timeout - 1 + + assert timeout, 'Device not available' + + # Echo test + ser1 = serial.Serial(port1) + ser2 = serial.Serial(port2) + + ser1.timeout = 1 + ser2.timeout = 1 + + str1 = b"test_no1" + ser1.write(str1) + ser1.flush() + assert ser1.read(100) == str1.lower(), 'Port1 wrong data' + assert ser2.read(100) == str1.upper(), 'Port2 wrong data' + + str2 = b"test_no2" + ser2.write(str2) + ser2.flush() + assert ser1.read(100) == str2.lower(), 'Port1 wrong data' + assert ser2.read(100) == str2.upper(), 'Port2 wrong data' + + +def test_cdc_msc(id): + port = get_serial_dev(id, "TinyUSB_Device", 0) + file = f'/media/blkUSB_{id[-8:]}.02/README.TXT' + # Wait device enum + timeout = 10 + while timeout: + if os.path.exists(port) and os.path.isfile(file): + break + time.sleep(1) + timeout = timeout - 1 + + assert timeout, 'Device not available' + + # Echo test + ser1 = serial.Serial(port) + + ser1.timeout = 1 + + str = b"test_str" + ser1.write(str) + ser1.flush() + assert ser1.read(100) == str, 'CDC wrong data' + + # Block test + f = open(file, 'rb') + data = f.read() + + readme = \ + b"This is tinyusb's MassStorage Class demo.\r\n\r\n\ +If you find any bugs or get any questions, feel free to file an\r\n\ +issue at github.com/hathach/tinyusb" + + assert data == readme, 'MSC wrong data' + +def test_dfu(id): + # Wait device enum + timeout = 10 + while timeout: + ret = subprocess.run(f'dfu-util -l', + shell=True, stdout=subprocess.PIPE, stderr=subprocess.STDOUT) + stdout = ret.stdout.decode() + if f'serial="{id}"' in stdout and 'Found DFU: [cafe:4000]' in stdout: + break + time.sleep(1) + timeout = timeout - 1 + + assert timeout, 'Device not available' + + # Test upload + try: + os.remove('dfu0') + os.remove('dfu1') + except OSError: + pass + + ret = subprocess.run(f'dfu-util -S {id} -a 0 -U dfu0', + shell=True, stdout=subprocess.PIPE, stderr=subprocess.STDOUT) + assert ret.returncode == 0, 'Upload failed' + + ret = subprocess.run(f'dfu-util -S {id} -a 1 -U dfu1', + shell=True, stdout=subprocess.PIPE, stderr=subprocess.STDOUT) + assert ret.returncode == 0, 'Upload failed' + + with open('dfu0') as f: + assert 'Hello world from TinyUSB DFU! - Partition 0' in f.read(), 'Wrong uploaded data' + + with open('dfu1') as f: + assert 'Hello world from TinyUSB DFU! - Partition 1' in f.read(), 'Wrong uploaded data' + + os.remove('dfu0') + os.remove('dfu1') + + +def test_dfu_runtime(id): + # Wait device enum + timeout = 10 + while timeout: + ret = subprocess.run(f'dfu-util -l', + shell=True, stdout=subprocess.PIPE, stderr=subprocess.STDOUT) + stdout = ret.stdout.decode() + if f'serial="{id}"' in stdout and 'Found Runtime: [cafe:4000]' in stdout: + break + time.sleep(1) + timeout = timeout - 1 + + assert timeout, 'Device not available' + + +def test_hid_boot_interface(id): + kbd = get_hid_dev(id, 'TinyUSB_Device', 'event-kbd') + mouse1 = get_hid_dev(id, 'TinyUSB_Device', 'if01-event-mouse') + mouse2 = get_hid_dev(id, 'TinyUSB_Device', 'if01-mouse') + # Wait device enum + timeout = 10 + while timeout: + if os.path.exists(kbd) and os.path.exists(mouse1) and os.path.exists(mouse2): + break + time.sleep(1) + timeout = timeout - 1 + + assert timeout, 'Device not available' + + +if __name__ == '__main__': + if len(sys.argv) != 2: + print('Usage:') + print('python hitl_test.py config.json') + sys.exit(-1) + + with open(f'{os.path.dirname(__file__)}/{sys.argv[1]}') as f: + config = json.load(f) + + # all possible tests, board_test is last to disable board's usb + all_tests = [ + 'cdc_dual_ports', 'cdc_msc', 'dfu', 'dfu_runtime', 'hid_boot_interface', 'board_test' + ] + + for board in config['boards']: + print(f'Testing board:{board["name"]}') + + # default to all tests + if 'tests' in board: + test_list = board['tests'] + else: + test_list = all_tests + + # remove skip_tests + if 'tests_skip' in board: + for skip in board['tests_skip']: + if skip in test_list: + test_list.remove(skip) + + for test in test_list: + mk_elf = f'examples/device/{test}/_build/{board["name"]}/{test}.elf' + cmake_elf = f'cmake-build/cmake-build-{board["name"]}/device/{test}/{test}.elf' + if os.path.isfile(cmake_elf): + elf = cmake_elf + elif os.path.isfile(mk_elf): + elf = mk_elf + else: + print(f'Cannot find firmware file for {test}') + sys.exit(-1) + + if board['debugger'].lower() == 'jlink': + flash_jlink(board['debugger_sn'], board['cpu'], elf) + else: + # ToDo + pass + print(f' {test} ...', end='') + locals()[f'test_{test}'](board['uid']) + print('OK') diff --git a/test/hitl/hitl_hfp.json b/test/hitl/hitl_hfp.json deleted file mode 100644 index 7912af245..000000000 --- a/test/hitl/hitl_hfp.json +++ /dev/null @@ -1,18 +0,0 @@ -{ - "boards": [ - { - "name": "stm32l412nucleo", - "uid": "41003B000E504E5457323020", - "debugger": "jlink", - "debugger_sn": "774470029", - "cpu": "STM32L412KB" - }, - { - "name": "stm32f746disco", - "uid": "210041000C51343237303334", - "debugger": "jlink", - "debugger_sn": "770935966", - "cpu": "STM32F746NG" - } - ] -} diff --git a/test/hitl/hitl_test.py b/test/hitl/hitl_test.py deleted file mode 100644 index 6bcde36c6..000000000 --- a/test/hitl/hitl_test.py +++ /dev/null @@ -1,250 +0,0 @@ -# -# The MIT License (MIT) -# -# Copyright (c) 2023 HiFiPhile -# -# Permission is hereby granted, free of charge, to any person obtaining a copy -# of this software and associated documentation files (the "Software"), to deal -# in the Software without restriction, including without limitation the rights -# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell -# copies of the Software, and to permit persons to whom the Software is -# furnished to do so, subject to the following conditions: -# -# The above copyright notice and this permission notice shall be included in -# all copies or substantial portions of the Software. -# -# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER -# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, -# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN -# THE SOFTWARE. - -# udev rules : -# ACTION=="add", SUBSYSTEM=="tty", SUBSYSTEMS=="usb", MODE="0666", PROGRAM="/bin/sh -c 'echo $$ID_SERIAL_SHORT | rev | cut -c -8 | rev'", SYMLINK+="ttyUSB_%c.%s{bInterfaceNumber}" -# ACTION=="add", SUBSYSTEM=="block", SUBSYSTEMS=="usb", ENV{ID_FS_USAGE}=="filesystem", MODE="0666", PROGRAM="/bin/sh -c 'echo $$ID_SERIAL_SHORT | rev | cut -c -8 | rev'", RUN{program}+="/usr/bin/systemd-mount --no-block --automount=yes --collect $devnode /media/blkUSB_%c.%s{bInterfaceNumber}" - -import os -import sys -import time -import serial -import subprocess -import json - - -def get_serial_dev(id, product, ifnum): - # get usb serial by id - return f'/dev/serial/by-id/usb-TinyUSB_{product}_{id}-if{ifnum:02d}' - - -def get_disk_dev(id, lun): - # get usb disk by id - return f'/dev/disk/by-id/usb-TinyUSB_Mass_Storage_{id}-0:{lun}' - - -def get_hid_dev(id, product, event): - return f'/dev/input/by-id/usb-TinyUSB_{product}_{id}-{event}' - - -def flash_jlink(sn, dev, firmware): - script = ['halt', 'r', f'loadfile {firmware}', 'r', 'go', 'exit'] - f = open('flash.jlink', 'w') - f.writelines(f'{s}\n' for s in script) - f.close() - ret = subprocess.run(f'JLinkExe -USB {sn} -device {dev} -if swd -JTAGConf -1,-1 -speed auto -NoGui 1 -ExitOnError 1 -CommandFile flash.jlink', - shell=True, stdout=subprocess.PIPE, stderr=subprocess.STDOUT) - stdout = ret.stdout.decode() - os.remove('flash.jlink') - assert ret.returncode == 0, 'Flash failed\n' + stdout - - -def test_board_test(id): - # Dummy test - pass - -def test_cdc_dual_ports(id): - port1 = get_serial_dev(id, "TinyUSB_Device", 0) - port2 = get_serial_dev(id, "TinyUSB_Device", 2) - - # Wait device enum - timeout = 10 - while timeout: - if os.path.exists(port1) and os.path.exists(port2): - break - time.sleep(1) - timeout = timeout - 1 - - assert timeout, 'Device not available' - - # Echo test - ser1 = serial.Serial(port1) - ser2 = serial.Serial(port2) - - ser1.timeout = 1 - ser2.timeout = 1 - - str1 = b"test_no1" - ser1.write(str1) - ser1.flush() - assert ser1.read(100) == str1.lower(), 'Port1 wrong data' - assert ser2.read(100) == str1.upper(), 'Port2 wrong data' - - str2 = b"test_no2" - ser2.write(str2) - ser2.flush() - assert ser1.read(100) == str2.lower(), 'Port1 wrong data' - assert ser2.read(100) == str2.upper(), 'Port2 wrong data' - - -def test_cdc_msc(id): - port = get_serial_dev(id, "TinyUSB_Device", 0) - file = f'/media/blkUSB_{id[-8:]}.02/README.TXT' - # Wait device enum - timeout = 10 - while timeout: - if os.path.exists(port) and os.path.isfile(file): - break - time.sleep(1) - timeout = timeout - 1 - - assert timeout, 'Device not available' - - # Echo test - ser1 = serial.Serial(port) - - ser1.timeout = 1 - - str = b"test_str" - ser1.write(str) - ser1.flush() - assert ser1.read(100) == str, 'CDC wrong data' - - # Block test - f = open(file, 'rb') - data = f.read() - - readme = \ - b"This is tinyusb's MassStorage Class demo.\r\n\r\n\ -If you find any bugs or get any questions, feel free to file an\r\n\ -issue at github.com/hathach/tinyusb" - - assert data == readme, 'MSC wrong data' - -def test_dfu(id): - # Wait device enum - timeout = 10 - while timeout: - ret = subprocess.run(f'dfu-util -l', - shell=True, stdout=subprocess.PIPE, stderr=subprocess.STDOUT) - stdout = ret.stdout.decode() - if f'serial="{id}"' in stdout and 'Found DFU: [cafe:4000]' in stdout: - break - time.sleep(1) - timeout = timeout - 1 - - assert timeout, 'Device not available' - - # Test upload - try: - os.remove('dfu0') - os.remove('dfu1') - except OSError: - pass - - ret = subprocess.run(f'dfu-util -S {id} -a 0 -U dfu0', - shell=True, stdout=subprocess.PIPE, stderr=subprocess.STDOUT) - assert ret.returncode == 0, 'Upload failed' - - ret = subprocess.run(f'dfu-util -S {id} -a 1 -U dfu1', - shell=True, stdout=subprocess.PIPE, stderr=subprocess.STDOUT) - assert ret.returncode == 0, 'Upload failed' - - with open('dfu0') as f: - assert 'Hello world from TinyUSB DFU! - Partition 0' in f.read(), 'Wrong uploaded data' - - with open('dfu1') as f: - assert 'Hello world from TinyUSB DFU! - Partition 1' in f.read(), 'Wrong uploaded data' - - os.remove('dfu0') - os.remove('dfu1') - - -def test_dfu_runtime(id): - # Wait device enum - timeout = 10 - while timeout: - ret = subprocess.run(f'dfu-util -l', - shell=True, stdout=subprocess.PIPE, stderr=subprocess.STDOUT) - stdout = ret.stdout.decode() - if f'serial="{id}"' in stdout and 'Found Runtime: [cafe:4000]' in stdout: - break - time.sleep(1) - timeout = timeout - 1 - - assert timeout, 'Device not available' - - -def test_hid_boot_interface(id): - kbd = get_hid_dev(id, 'TinyUSB_Device', 'event-kbd') - mouse1 = get_hid_dev(id, 'TinyUSB_Device', 'if01-event-mouse') - mouse2 = get_hid_dev(id, 'TinyUSB_Device', 'if01-mouse') - # Wait device enum - timeout = 10 - while timeout: - if os.path.exists(kbd) and os.path.exists(mouse1) and os.path.exists(mouse2): - break - time.sleep(1) - timeout = timeout - 1 - - assert timeout, 'Device not available' - - -if __name__ == '__main__': - if len(sys.argv) != 2: - print('Usage:') - print('python hitl_test.py config.json') - sys.exit(-1) - - with open(f'{os.path.dirname(__file__)}/{sys.argv[1]}') as f: - config = json.load(f) - - # all possible tests, board_test is last to disable board's usb - all_tests = [ - 'cdc_dual_ports', 'cdc_msc', 'dfu', 'dfu_runtime', 'hid_boot_interface', 'board_test' - ] - - for board in config['boards']: - print(f'Testing board:{board["name"]}') - - # default to all tests - if 'tests' in board: - test_list = board['tests'] - else: - test_list = all_tests - - # remove skip_tests - if 'tests_skip' in board: - for skip in board['tests_skip']: - if skip in test_list: - test_list.remove(skip) - - for test in test_list: - mk_elf = f'examples/device/{test}/_build/{board["name"]}/{test}.elf' - cmake_elf = f'cmake-build/cmake-build-{board["name"]}/device/{test}/{test}.elf' - if os.path.isfile(cmake_elf): - elf = cmake_elf - elif os.path.isfile(mk_elf): - elf = mk_elf - else: - print(f'Cannot find firmware file for {test}') - sys.exit(-1) - - if board['debugger'].lower() == 'jlink': - flash_jlink(board['debugger_sn'], board['cpu'], elf) - else: - # ToDo - pass - print(f' {test} ...', end='') - locals()[f'test_{test}'](board['uid']) - print('OK') -- cgit v1.3.1 From 088180e3d86cc51472dcd06ae42c613b534bf71c Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 14 Aug 2023 20:58:00 +0700 Subject: add iar support for lpc43, add lpcxpresso43s67 to hil farm --- .github/workflows/build_iar.yml | 81 +------------------------- examples/host/msc_file_explorer/CMakeLists.txt | 12 ++-- hw/bsp/lpc43/family.c | 18 +++++- hw/bsp/lpc43/family.cmake | 75 +++++++++++++----------- test/hil/hil_hfp.json | 7 +++ tools/get_deps.py | 2 +- 6 files changed, 71 insertions(+), 124 deletions(-) (limited to '.github') diff --git a/.github/workflows/build_iar.yml b/.github/workflows/build_iar.yml index 48fdd6a8a..1eacf90c9 100644 --- a/.github/workflows/build_iar.yml +++ b/.github/workflows/build_iar.yml @@ -32,7 +32,7 @@ jobs: # Alphabetical order # Note: bundle multiple families into a matrix since there is only one self-hosted instance can # run IAR build. Too many matrix can hurt due to setup/teardown overhead. - - 'stm32f0 stm32f1 stm32f4 stm32f7 stm32g0 stm32g4 stm32h7 stm32l4' + - 'lpc43 stm32f0 stm32f1 stm32f4 stm32f7 stm32g0 stm32g4 stm32h7 stm32l4' steps: - name: Clean workspace run: | @@ -52,82 +52,3 @@ jobs: - name: Test on actual hardware (hardware in the loop) run: | python3 test/hil/hil_test.py hil_hfp.json - -# # Upload binaries for hardware test with self-hosted -# - name: Prepare stm32l412nucleo Artifacts -# if: contains(matrix.family, 'stm32l4') -# working-directory: ${{github.workspace}}/cmake-build/cmake-build-stm32l412nucleo -# run: | -# find device/ -name "*.elf" -exec mv {} ../../ \; -# -# - name: Upload Artifacts for stm32l412nucleo -# if: contains(matrix.family, 'stm32l4') && github.repository_owner == 'hathach' -# uses: actions/upload-artifact@v3 -# with: -# name: stm32l4 -# path: | -# *.elf - - # --------------------------------------- - # Hardware in the loop (HIL) - # Current self-hosted instance is running on an EPYC 7232 server hosted by HiFiPhile user - # --------------------------------------- -# hw-stm32l412nucleo-test: -# needs: cmake -# runs-on: [self-hosted, Linux, X64, hifiphile] -# -# steps: -# - name: Clean workspace -# run: | -# echo "Cleaning up previous run" -# rm -rf "${{ github.workspace }}" -# mkdir -p "${{ github.workspace }}" -# -# - name: Download stm32l4 Artifacts -# uses: actions/download-artifact@v3 -# with: -# name: stm32l4 -# -# - name: Create flash.sh -# run: | -# echo > flash.sh 'echo halt > flash.jlink' -# echo >> flash.sh 'echo r >> flash.jlink' -# echo >> flash.sh 'echo loadfile $1 >> flash.jlink' -# echo >> flash.sh 'echo r >> flash.jlink' -# echo >> flash.sh 'echo go >> flash.jlink' -# echo >> flash.sh 'echo exit >> flash.jlink' -# echo >> flash.sh 'cmdout=$(JLinkExe -USB 774470029 -device stm32l412kb -if swd -JTAGConf -1,-1 -speed auto -NoGui 1 -ExitOnError 1 -CommandFile flash.jlink)' -# echo >> flash.sh 'if (( $? )) ; then echo $cmdout ; fi' -# chmod +x flash.sh -# -# - name: Test cdc_dual_ports -# run: | -# ./flash.sh cdc_dual_ports.elf -# while (! ([ -e /dev/ttyACM1 ] && [ -e /dev/ttyACM2 ])) && [ $SECONDS -le 10 ]; do :; done -# test -e /dev/ttyACM1 && echo "ttyACM1 exists" -# test -e /dev/ttyACM2 && echo "ttyACM2 exists" -# -# # Debian does not auto mount usb drive. skip this test for now -# - name: Test cdc_msc -# if: false -# run: | -# ./flash.sh cdc_msc.elf -# readme='/media/pi/TinyUSB MSC/README.TXT' -# while (! ([ -e /dev/ttyACM1 ] && [ -f "$readme" ])) && [ $SECONDS -le 10 ]; do :; done -# test -e /dev/ttyACM1 && echo "ttyACM1 exists" -# test -f "$readme" && echo "$readme exists" -# cat "$readme" -# -# - name: Test dfu -# run: | -# ./flash.sh dfu.elf -# while (! (dfu-util -l | grep "Found DFU")) && [ $SECONDS -le 10 ]; do :; done -# dfu-util -d cafe -a 0 -U dfu0 -# dfu-util -d cafe -a 1 -U dfu1 -# grep "TinyUSB DFU! - Partition 0" dfu0 -# grep "TinyUSB DFU! - Partition 1" dfu1 -# -# - name: Test dfu_runtime -# run: | -# ./flash.sh dfu_runtime.elf -# while (! (dfu-util -l | grep "Found Runtime")) && [ $SECONDS -le 10 ]; do :; done diff --git a/examples/host/msc_file_explorer/CMakeLists.txt b/examples/host/msc_file_explorer/CMakeLists.txt index a35a7f0fb..1868b632e 100644 --- a/examples/host/msc_file_explorer/CMakeLists.txt +++ b/examples/host/msc_file_explorer/CMakeLists.txt @@ -22,11 +22,13 @@ target_sources(${PROJECT} PUBLIC ) # Suppress warnings on fatfs -set_source_files_properties( - ${TOP}/lib/fatfs/source/ff.c - PROPERTIES - COMPILE_FLAGS "-Wno-conversion -Wno-cast-qual" -) +if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + set_source_files_properties( + ${TOP}/lib/fatfs/source/ff.c + PROPERTIES + COMPILE_FLAGS "-Wno-conversion -Wno-cast-qual" + ) +endif () # Example include target_include_directories(${PROJECT} PUBLIC diff --git a/hw/bsp/lpc43/family.c b/hw/bsp/lpc43/family.c index 8d80bf951..d52c1a071 100644 --- a/hw/bsp/lpc43/family.c +++ b/hw/bsp/lpc43/family.c @@ -63,13 +63,25 @@ const uint32_t ExtRateIn = 0; void SystemInit(void) { #ifdef __USE_LPCOPEN - extern void (* const g_pfnVectors[])(void); unsigned int *pSCB_VTOR = (unsigned int *) 0xE000ED08; + +#ifdef __ICCARM__ + extern void *__vector_table; + *pSCB_VTOR = (unsigned int) &__vector_table; + +#elif defined(__ARMCC_VERSION) + extern void *__Vectors; + *pSCB_VTOR = (unsigned int) &__Vectors; + +#else // other compoiler using cr_startup_lpc43xx.c + extern void (* const g_pfnVectors[])(void); *pSCB_VTOR = (unsigned int) g_pfnVectors; +#endif - #if __FPU_USED == 1 +#if __FPU_USED == 1 fpuInit(); - #endif +#endif + #endif /* Setup system level pin muxing */ diff --git a/hw/bsp/lpc43/family.cmake b/hw/bsp/lpc43/family.cmake index e79004686..608fc4ca3 100644 --- a/hw/bsp/lpc43/family.cmake +++ b/hw/bsp/lpc43/family.cmake @@ -17,43 +17,48 @@ set(FAMILY_MCUS LPC43XX CACHE INTERNAL "") #------------------------------------ # only need to be built ONCE for all examples function(add_board_target BOARD_TARGET) - if (NOT TARGET ${BOARD_TARGET}) - add_library(${BOARD_TARGET} STATIC - ${SDK_DIR}/../gcc/cr_startup_lpc43xx.c - ${SDK_DIR}/src/chip_18xx_43xx.c - ${SDK_DIR}/src/clock_18xx_43xx.c - ${SDK_DIR}/src/fpu_init.c - ${SDK_DIR}/src/gpio_18xx_43xx.c - ${SDK_DIR}/src/iap_18xx_43xx.c - ${SDK_DIR}/src/sysinit_18xx_43xx.c - ${SDK_DIR}/src/uart_18xx_43xx.c - ) - target_compile_options(${BOARD_TARGET} PUBLIC - -nostdlib - ) - target_compile_definitions(${BOARD_TARGET} PUBLIC - __USE_LPCOPEN - CORE_M4 + if (TARGET ${BOARD_TARGET}) + return() + endif () + + # Startup & Linker script + set(STARTUP_FILE_GNU ${SDK_DIR}/../gcc/cr_startup_lpc43xx.c) + set(STARTUP_FILE_IAR ${SDK_DIR}/../iar/iar_startup_lpc18xx43xx.s) + set(LD_FILE_IAR ${SDK_DIR}/../iar/linker/lpc18xx_43xx_ldscript_iflash.icf) + + add_library(${BOARD_TARGET} STATIC + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} + ${SDK_DIR}/src/chip_18xx_43xx.c + ${SDK_DIR}/src/clock_18xx_43xx.c + ${SDK_DIR}/src/fpu_init.c + ${SDK_DIR}/src/gpio_18xx_43xx.c + ${SDK_DIR}/src/iap_18xx_43xx.c + ${SDK_DIR}/src/sysinit_18xx_43xx.c + ${SDK_DIR}/src/uart_18xx_43xx.c + ) + target_compile_definitions(${BOARD_TARGET} PUBLIC + __USE_LPCOPEN + CORE_M4 + ) + target_include_directories(${BOARD_TARGET} PUBLIC + ${SDK_DIR}/inc + ${SDK_DIR}/inc/config_43xx + ) + + update_board(${BOARD_TARGET}) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_compile_options(${BOARD_TARGET} PUBLIC -nostdlib) + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + # nanolib + --specs=nosys.specs + --specs=nano.specs ) - target_include_directories(${BOARD_TARGET} PUBLIC - ${SDK_DIR}/inc - ${SDK_DIR}/inc/config_43xx + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" ) - - update_board(${BOARD_TARGET}) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - # nanolib - --specs=nosys.specs - --specs=nano.specs - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--config=${LD_FILE_IAR}" - ) - endif () endif () endfunction() diff --git a/test/hil/hil_hfp.json b/test/hil/hil_hfp.json index 7912af245..58f550901 100644 --- a/test/hil/hil_hfp.json +++ b/test/hil/hil_hfp.json @@ -13,6 +13,13 @@ "debugger": "jlink", "debugger_sn": "770935966", "cpu": "STM32F746NG" + }, + { + "name": "lpcxpresso43s67", + "uid": "08F000044528BAAA8D858F58C50700F5", + "debugger": "jlink", + "debugger_sn": "728973776", + "cpu": "LPC43S67_M4" } ] } diff --git a/tools/get_deps.py b/tools/get_deps.py index 82f756f64..1fac291a3 100644 --- a/tools/get_deps.py +++ b/tools/get_deps.py @@ -48,7 +48,7 @@ deps_optional = { '2204191ec76283371419fbcec207da02e1bc22fa', 'nuc'], 'hw/mcu/nxp/lpcopen': ['https://github.com/hathach/nxp_lpcopen.git', - '43c45c85405a5dd114fff0ea95cca62837740c13', + '84e0bd3e43910aaf71eefd62075cf57495418312', 'lpc11 lpc13 lpc15 lpc17 lpc18 lpc40 lpc43'], 'hw/mcu/nxp/mcux-sdk': ['https://github.com/hathach/mcux-sdk.git', '950819b7de9b32f92c3edf396bc5ffb8d66e7009', -- cgit v1.3.1