From 8cdcd0fa9d1530c88637e01924a4218f8106fc3a Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 19 Sep 2023 18:33:59 +0700 Subject: fix build and add u5 to ci --- .github/workflows/build_arm.yml | 2 +- .github/workflows/cmake_arm.yml | 1 + 2 files changed, 2 insertions(+), 1 deletion(-) (limited to '.github') diff --git a/.github/workflows/build_arm.yml b/.github/workflows/build_arm.yml index 975f351a0..997fb7da9 100644 --- a/.github/workflows/build_arm.yml +++ b/.github/workflows/build_arm.yml @@ -40,7 +40,7 @@ jobs: - 'mm32 msp432e4' - 'samd11 same5x saml2x' - 'stm32f2 stm32f3' - - 'stm32l0 stm32u5 stm32wb' + - 'stm32l0 stm32wb' - 'tm4c123 xmc4000' steps: - name: Setup Python diff --git a/.github/workflows/cmake_arm.yml b/.github/workflows/cmake_arm.yml index 4b788a213..192bf957a 100644 --- a/.github/workflows/cmake_arm.yml +++ b/.github/workflows/cmake_arm.yml @@ -51,6 +51,7 @@ jobs: - 'stm32g4' - 'stm32h7' - 'stm32l4' + - 'stm32u5' steps: - name: Setup Python uses: actions/setup-python@v4 -- cgit v1.3.1 From 0a4fb6963de9a62be613cab5ab33f70c2e836b3d Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 27 Sep 2023 16:19:39 +0700 Subject: fix build with lpc54 --- .github/workflows/build_arm.yml | 2 +- .github/workflows/cmake_arm.yml | 2 +- hw/bsp/family_support.cmake | 1 + hw/bsp/lpc54/FreeRTOSConfig/FreeRTOSConfig.h | 165 ++++++++++++++++++++++++ hw/bsp/lpc54/boards/lpcxpresso54114/board.cmake | 21 +++ hw/bsp/lpc54/boards/lpcxpresso54608/board.cmake | 22 ++++ hw/bsp/lpc54/family.cmake | 138 ++++++++++---------- 7 files changed, 281 insertions(+), 70 deletions(-) create mode 100644 hw/bsp/lpc54/FreeRTOSConfig/FreeRTOSConfig.h create mode 100644 hw/bsp/lpc54/boards/lpcxpresso54114/board.cmake create mode 100644 hw/bsp/lpc54/boards/lpcxpresso54608/board.cmake (limited to '.github') diff --git a/.github/workflows/build_arm.yml b/.github/workflows/build_arm.yml index 975f351a0..c7462f0d7 100644 --- a/.github/workflows/build_arm.yml +++ b/.github/workflows/build_arm.yml @@ -36,7 +36,7 @@ jobs: - 'broadcom_32bit' - 'kinetis_k32l2' - 'lpc11 lpc13 lpc15 lpc17' - - 'lpc51 lpc54' + - 'lpc51' - 'mm32 msp432e4' - 'samd11 same5x saml2x' - 'stm32f2 stm32f3' diff --git a/.github/workflows/cmake_arm.yml b/.github/workflows/cmake_arm.yml index 4b788a213..5dc36ee2c 100644 --- a/.github/workflows/cmake_arm.yml +++ b/.github/workflows/cmake_arm.yml @@ -36,7 +36,7 @@ jobs: - 'imxrt' - 'kinetis_kl' - 'lpc18 lpc40 lpc43' - - 'lpc55' + - 'lpc54 lpc55' - 'mcx' - 'nrf' - 'ra' diff --git a/hw/bsp/family_support.cmake b/hw/bsp/family_support.cmake index 642282b0e..9c625b58e 100644 --- a/hw/bsp/family_support.cmake +++ b/hw/bsp/family_support.cmake @@ -40,6 +40,7 @@ if (NOT FAMILY STREQUAL rp2040) # enable LTO if supported skip rp2040 include(CheckIPOSupported) check_ipo_supported(RESULT IPO_SUPPORTED) + cmake_print_variables(IPO_SUPPORTED) if (IPO_SUPPORTED) set(CMAKE_INTERPROCEDURAL_OPTIMIZATION TRUE) endif() diff --git a/hw/bsp/lpc54/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/lpc54/FreeRTOSConfig/FreeRTOSConfig.h new file mode 100644 index 000000000..fc0ab1f2d --- /dev/null +++ b/hw/bsp/lpc54/FreeRTOSConfig/FreeRTOSConfig.h @@ -0,0 +1,165 @@ +/* + * FreeRTOS Kernel V10.0.0 + * Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. If you wish to use our Amazon + * FreeRTOS name, please do so in a fair use way that does not cause confusion. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://www.FreeRTOS.org + * http://aws.amazon.com/freertos + * + * 1 tab == 4 spaces! + */ + + +#ifndef FREERTOS_CONFIG_H +#define FREERTOS_CONFIG_H + +/*----------------------------------------------------------- + * Application specific definitions. + * + * These definitions should be adjusted for your particular hardware and + * application requirements. + * + * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE + * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE. + * + * See http://www.freertos.org/a00110.html. + *----------------------------------------------------------*/ + +// skip if included from IAR assembler +#ifndef __IASMARM__ + #include "fsl_device_registers.h" +#endif + +/* Cortex M23/M33 port configuration. */ +#define configENABLE_MPU 0 +#define configENABLE_FPU 1 +#define configENABLE_TRUSTZONE 0 +#define configMINIMAL_SECURE_STACK_SIZE (1024) + +#define configUSE_PREEMPTION 1 +#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0 +#define configCPU_CLOCK_HZ SystemCoreClock +#define configTICK_RATE_HZ ( 1000 ) +#define configMAX_PRIORITIES ( 5 ) +#define configMINIMAL_STACK_SIZE ( 128 ) +#define configTOTAL_HEAP_SIZE ( configSUPPORT_DYNAMIC_ALLOCATION*4*1024 ) +#define configMAX_TASK_NAME_LEN 16 +#define configUSE_16_BIT_TICKS 0 +#define configIDLE_SHOULD_YIELD 1 +#define configUSE_MUTEXES 1 +#define configUSE_RECURSIVE_MUTEXES 1 +#define configUSE_COUNTING_SEMAPHORES 1 +#define configQUEUE_REGISTRY_SIZE 4 +#define configUSE_QUEUE_SETS 0 +#define configUSE_TIME_SLICING 0 +#define configUSE_NEWLIB_REENTRANT 0 +#define configENABLE_BACKWARD_COMPATIBILITY 1 +#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 + +#define configSUPPORT_STATIC_ALLOCATION 0 +#define configSUPPORT_DYNAMIC_ALLOCATION 1 + +/* Hook function related definitions. */ +#define configUSE_IDLE_HOOK 0 +#define configUSE_TICK_HOOK 0 +#define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning +#define configCHECK_FOR_STACK_OVERFLOW 2 + +/* Run time and task stats gathering related definitions. */ +#define configGENERATE_RUN_TIME_STATS 0 +#define configRECORD_STACK_HIGH_ADDRESS 1 +#define configUSE_TRACE_FACILITY 1 // legacy trace +#define configUSE_STATS_FORMATTING_FUNCTIONS 0 + +/* Co-routine definitions. */ +#define configUSE_CO_ROUTINES 0 +#define configMAX_CO_ROUTINE_PRIORITIES 2 + +/* Software timer related definitions. */ +#define configUSE_TIMERS 1 +#define configTIMER_TASK_PRIORITY (configMAX_PRIORITIES-2) +#define configTIMER_QUEUE_LENGTH 32 +#define configTIMER_TASK_STACK_DEPTH configMINIMAL_STACK_SIZE + +/* Optional functions - most linkers will remove unused functions anyway. */ +#define INCLUDE_vTaskPrioritySet 0 +#define INCLUDE_uxTaskPriorityGet 0 +#define INCLUDE_vTaskDelete 0 +#define INCLUDE_vTaskSuspend 1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY +#define INCLUDE_xResumeFromISR 0 +#define INCLUDE_vTaskDelayUntil 1 +#define INCLUDE_vTaskDelay 1 +#define INCLUDE_xTaskGetSchedulerState 0 +#define INCLUDE_xTaskGetCurrentTaskHandle 1 +#define INCLUDE_uxTaskGetStackHighWaterMark 0 +#define INCLUDE_xTaskGetIdleTaskHandle 0 +#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0 +#define INCLUDE_pcTaskGetTaskName 0 +#define INCLUDE_eTaskGetState 0 +#define INCLUDE_xEventGroupSetBitFromISR 0 +#define INCLUDE_xTimerPendFunctionCall 0 + +/* Define to trap errors during development. */ +// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7 +#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__) + #define configASSERT(_exp) \ + do {\ + if ( !(_exp) ) { \ + volatile uint32_t* ARM_CM_DHCSR = ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \ + if ( (*ARM_CM_DHCSR) & 1UL ) { /* Only halt mcu if debugger is attached */ \ + taskDISABLE_INTERRUPTS(); \ + __asm("BKPT #0\n"); \ + }\ + }\ + } while(0) +#else + #define configASSERT( x ) +#endif + +/* FreeRTOS hooks to NVIC vectors */ +#define xPortPendSVHandler PendSV_Handler +#define xPortSysTickHandler SysTick_Handler +#define vPortSVCHandler SVC_Handler + +//--------------------------------------------------------------------+ +// Interrupt nesting behavior configuration. +//--------------------------------------------------------------------+ + +// For Cortex-M specific: __NVIC_PRIO_BITS is defined in mcu header +#define configPRIO_BITS 3 + +/* The lowest interrupt priority that can be used in a call to a "set priority" function. */ +#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY ((1<) #------------------------------------ # only need to be built ONCE for all examples function(add_board_target BOARD_TARGET) - if (NOT TARGET ${BOARD_TARGET}) - add_library(${BOARD_TARGET} STATIC - # driver - ${SDK_DIR}/drivers/lpc_gpio/fsl_gpio.c - ${SDK_DIR}/drivers/common/fsl_common_arm.c - ${SDK_DIR}/drivers/flexcomm/fsl_flexcomm.c - ${SDK_DIR}/drivers/flexcomm/fsl_usart.c - # mcu - ${SDK_DIR}/devices/${MCU_VARIANT}/system_${MCU_CORE}.c - ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_clock.c - ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_power.c - ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_reset.c - ) + if (TARGET ${BOARD_TARGET}) + return() + endif() + + add_library(${BOARD_TARGET} STATIC + # driver + ${SDK_DIR}/drivers/lpc_gpio/fsl_gpio.c + ${SDK_DIR}/drivers/common/fsl_common_arm.c + ${SDK_DIR}/drivers/flexcomm/fsl_flexcomm.c + ${SDK_DIR}/drivers/flexcomm/fsl_usart.c + # mcu + ${SDK_DIR}/devices/${MCU_VARIANT}/system_${MCU_CORE}.c + ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_clock.c + ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_power.c + ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_reset.c + ) + target_compile_definitions(${BOARD_TARGET} PUBLIC + CFG_TUSB_MEM_ALIGN=TU_ATTR_ALIGNED\(64\) + BOARD_TUD_RHPORT=${PORT} + BOARD_TUH_RHPORT=${HOST_PORT} + ) + # Port 0 is Fullspeed, Port 1 is Highspeed. Port1 controller can only access USB_SRAM + if (PORT EQUAL 1) target_compile_definitions(${BOARD_TARGET} PUBLIC - CFG_TUSB_MEM_ALIGN=TU_ATTR_ALIGNED\(64\) - BOARD_TUD_RHPORT=${PORT} - BOARD_TUH_RHPORT=${HOST_PORT} + BOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED + BOARD_TUH_MAX_SPEED=OPT_MODE_FULL_SPEED + CFG_TUD_MEM_SECTION=__attribute__\(\(section\(\"m_usb_global\"\)\)\) ) - # Port 0 is Fullspeed, Port 1 is Highspeed. Port1 controller can only access USB_SRAM - if (PORT EQUAL 1) - target_compile_definitions(${BOARD_TARGET} PUBLIC - BOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED - BOARD_TUH_MAX_SPEED=OPT_MODE_FULL_SPEED - CFG_TUD_MEM_SECTION=__attribute__\(\(section\(\"m_usb_global\"\)\)\) - ) - else () - target_compile_definitions(${BOARD_TARGET} PUBLIC - BOARD_TUD_MAX_SPEED=OPT_MODE_FULL_SPEED - BOARD_TUH_MAX_SPEED=OPT_MODE_HIGH_SPEED - CFG_TUH_MEM_SECTION=__attribute__\(\(section\(\"m_usb_global\"\)\)\) - #CFG_TUD_MEM_SECTION=__attribute__\(\(section\(\"m_usb_global\"\)\)\) - ) - endif () - - target_include_directories(${BOARD_TARGET} PUBLIC - ${TOP}/lib/sct_neopixel - # driver - ${SDK_DIR}/drivers/common - ${SDK_DIR}/drivers/flexcomm - ${SDK_DIR}/drivers/lpc_iocon - ${SDK_DIR}/drivers/lpc_gpio - ${SDK_DIR}/drivers/lpuart - ${SDK_DIR}/drivers/sctimer - # mcu - ${CMSIS_DIR}/CMSIS/Core/Include - ${SDK_DIR}/devices/${MCU_VARIANT} - ${SDK_DIR}/devices/${MCU_VARIANT}/drivers + else () + target_compile_definitions(${BOARD_TARGET} PUBLIC + BOARD_TUD_MAX_SPEED=OPT_MODE_FULL_SPEED + BOARD_TUH_MAX_SPEED=OPT_MODE_HIGH_SPEED + CFG_TUH_MEM_SECTION=__attribute__\(\(section\(\"m_usb_global\"\)\)\) + #CFG_TUD_MEM_SECTION=__attribute__\(\(section\(\"m_usb_global\"\)\)\) ) + endif () + + target_include_directories(${BOARD_TARGET} PUBLIC + ${TOP}/lib/sct_neopixel + # driver + ${SDK_DIR}/drivers/common + ${SDK_DIR}/drivers/flexcomm + ${SDK_DIR}/drivers/lpc_iocon + ${SDK_DIR}/drivers/lpc_gpio + ${SDK_DIR}/drivers/lpuart + ${SDK_DIR}/drivers/sctimer + # mcu + ${CMSIS_DIR}/CMSIS/Core/Include + ${SDK_DIR}/devices/${MCU_VARIANT} + ${SDK_DIR}/devices/${MCU_VARIANT}/drivers + ) - update_board(${BOARD_TARGET}) + update_board(${BOARD_TARGET}) - if (NOT DEFINED LD_FILE_${CMAKE_C_COMPILER_ID}) - set(LD_FILE_GNU ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/${MCU_CORE}_flash.ld) - endif () + if (NOT DEFINED LD_FILE_${CMAKE_C_COMPILER_ID}) + set(LD_FILE_GNU ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/${MCU_CORE}_flash.ld) + endif () - if (NOT DEFINED STARTUP_FILE_${CMAKE_C_COMPILER_ID}) - set(STARTUP_FILE_GNU ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/startup_${MCU_CORE}.S) - endif () + if (NOT DEFINED STARTUP_FILE_${CMAKE_C_COMPILER_ID}) + set(STARTUP_FILE_GNU ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/startup_${MCU_CORE}.S) + endif () - target_sources(${BOARD_TARGET} PUBLIC - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} - ) + target_sources(${BOARD_TARGET} PUBLIC + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} + ) - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_options(${BOARD_TARGET} PUBLIC - # linker file - "LINKER:--script=${LD_FILE_GNU}" - # nanolib - --specs=nosys.specs - --specs=nano.specs - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--config=${LD_FILE_IAR}" - ) - endif () + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${BOARD_TARGET} PUBLIC + # linker file + "LINKER:--script=${LD_FILE_GNU}" + # nanolib + --specs=nosys.specs + --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) endif () endfunction() -- cgit v1.3.1 From 8348631bf538e2aa0a433ed6e7df9e42bb39bdd5 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 28 Sep 2023 16:15:31 +0700 Subject: improve esp32 ci, build esp32 with -DDMAX3421_HOST=1 for max3421 testing revert change in hcd.h --- .github/workflows/build_esp.yml | 21 +------- .../espressif/boards/espressif_s3_devkitm/board.h | 8 +++ src/host/hcd.h | 3 -- tools/build_esp32.py | 63 ++++++++++++---------- 4 files changed, 45 insertions(+), 50 deletions(-) (limited to '.github') diff --git a/.github/workflows/build_esp.yml b/.github/workflows/build_esp.yml index 29585cb36..897616f09 100644 --- a/.github/workflows/build_esp.yml +++ b/.github/workflows/build_esp.yml @@ -29,12 +29,10 @@ jobs: fail-fast: false matrix: board: - # Alphabetical order # ESP32-S2 - - 'espressif_saola_1' + - 'espressif_kaluga_1' # ESP32-S3 - #- 'espressif_s3_devkitm' - # S3 compile error with "dangerous relocation: call8: call target out of range: memcpy" + - 'espressif_s3_devkitm' steps: - name: Setup Python @@ -48,20 +46,5 @@ jobs: - name: Checkout TinyUSB uses: actions/checkout@v3 - - name: Checkout hathach/linkermap - uses: actions/checkout@v3 - with: - repository: hathach/linkermap - path: linkermap - - name: Build run: docker run --rm -v $PWD:/project -w /project espressif/idf:latest python3 tools/build_esp32.py ${{ matrix.board }} - - - name: Linker Map - run: | - pip install linkermap/ - # find -quit to only print linkermap of 1 board per example - for ex in `ls -d examples/device/*/` - do - find ${ex} -maxdepth 3 -name *.map -print -quit | xargs -I % sh -c 'echo "::group::%"; linkermap -v %; echo "::endgroup::"' - done diff --git a/hw/bsp/espressif/boards/espressif_s3_devkitm/board.h b/hw/bsp/espressif/boards/espressif_s3_devkitm/board.h index fe33b5c43..4b4151e72 100644 --- a/hw/bsp/espressif/boards/espressif_s3_devkitm/board.h +++ b/hw/bsp/espressif/boards/espressif_s3_devkitm/board.h @@ -36,6 +36,14 @@ #define BUTTON_PIN 0 #define BUTTON_STATE_ACTIVE 0 +// SPI for USB host shield +#define MAX3421_SPI_HOST SPI2_HOST +#define MAX3421_SCK_PIN 36 +#define MAX3421_MOSI_PIN 35 +#define MAX3421_MISO_PIN 37 +#define MAX3421_CS_PIN 15 +#define MAX3421_INTR_PIN 14 + #ifdef __cplusplus } #endif diff --git a/src/host/hcd.h b/src/host/hcd.h index edffb34cb..2bde289df 100644 --- a/src/host/hcd.h +++ b/src/host/hcd.h @@ -133,9 +133,6 @@ bool hcd_init(uint8_t rhport); // Interrupt Handler void hcd_int_handler(uint8_t rhport, bool in_isr); -// Interrupt Hanndler (extended version) -void hcd_int_handler_ext(uint8_t rhport, bool in_isr); - // Enable USB interrupt void hcd_int_enable (uint8_t rhport); diff --git a/tools/build_esp32.py b/tools/build_esp32.py index 00783bf58..1f73d3b22 100644 --- a/tools/build_esp32.py +++ b/tools/build_esp32.py @@ -17,8 +17,8 @@ exit_status = 0 total_time = time.monotonic() -build_format = '| {:23} | {:30} | {:18} | {:7} | {:6} | {:6} |' -build_separator = '-' * 100 +build_format = '| {:30} | {:30} | {:18} | {:7} | {:6} | {:6} |' +build_separator = '-' * 107 def filter_with_input(mylist): if len(sys.argv) > 1: @@ -26,12 +26,9 @@ def filter_with_input(mylist): if len(input_args) > 0: mylist[:] = input_args + # Build all examples if not specified -all_examples = [] -for entry in os.scandir("examples/device"): - # Only includes example with CMakeLists.txt for esp32s, and skip board_test to speed up ci - if entry.is_dir() and os.path.exists(entry.path + "/sdkconfig.defaults") and entry.name != 'board_test': - all_examples.append(entry.name) +all_examples = [entry.replace('examples/', '') for entry in glob.glob("examples/*/*_freertos")] filter_with_input(all_examples) all_examples.sort() @@ -46,32 +43,41 @@ all_boards.sort() def build_board(example, board): global success_count, fail_count, skip_count, exit_status start_time = time.monotonic() + + # Check if board is skipped + build_dir = f"cmake-build/cmake-build-{board}/{example}" + + # Generate and build + r = subprocess.run(f"cmake examples/{example} -B {build_dir} -G \"Ninja\" -DBOARD={board} -DMAX3421_HOST=1", + shell=True, stdout=subprocess.PIPE, stderr=subprocess.STDOUT) + if r.returncode == 0: + r = subprocess.run(f"cmake --build {build_dir}", shell=True, stdout=subprocess.PIPE, + stderr=subprocess.STDOUT) + build_duration = time.monotonic() - start_time flash_size = "-" sram_size = "-" - # Check if board is skipped - if build_utils.skip_example(example, board): - success = SKIPPED - skip_count += 1 - print(build_format.format(example, board, success, '-', flash_size, sram_size)) + if r.returncode == 0: + success = SUCCEEDED + success_count += 1 + #(flash_size, sram_size) = build_size(example, board) else: - subprocess.run("make -C examples/device/{} BOARD={} clean".format(example, board), shell=True, stdout=subprocess.PIPE, stderr=subprocess.STDOUT) - build_result = subprocess.run("make -j -C examples/device/{} BOARD={} all".format(example, board), shell=True, stdout=subprocess.PIPE, stderr=subprocess.STDOUT) - - if build_result.returncode == 0: - success = SUCCEEDED - success_count += 1 - (flash_size, sram_size) = build_size(example, board) - else: - exit_status = build_result.returncode - success = FAILED - fail_count += 1 - - build_duration = time.monotonic() - start_time - print(build_format.format(example, board, success, "{:.2f}s".format(build_duration), flash_size, sram_size)) + exit_status = r.returncode + success = FAILED + fail_count += 1 + + title = build_format.format(example, board, success, "{:.2f}s".format(build_duration), flash_size, sram_size) + if os.getenv('CI'): + # always print build output if in CI + print(f"::group::{title}") + print(r.stdout.decode("utf-8")) + print(f"::endgroup::") + else: + # print build output if failed + print(title) + if r.returncode != 0: + print(r.stdout.decode("utf-8")) - if build_result.returncode != 0: - print(build_result.stdout.decode("utf-8")) def build_size(example, board): #elf_file = 'examples/device/{}/_build/{}/{}-firmware.elf'.format(example, board, board) @@ -82,6 +88,7 @@ def build_size(example, board): sram_size = int(size_list[1]) + int(size_list[2]) return (flash_size, sram_size) + print(build_separator) print(build_format.format('Example', 'Board', '\033[39mResult\033[0m', 'Time', 'Flash', 'SRAM')) print(build_separator) -- cgit v1.3.1