From 310b8657f06570362740c4dda89705f694c81538 Mon Sep 17 00:00:00 2001 From: Ha Thach Date: Thu, 5 Dec 2024 18:01:16 +0700 Subject: try to run arm-iar with circleci with new token (#2890) * try to run arm-iar with circleci with new token * limit iar ci parallel build to 4 for medium+ and 6 for large * add hil-hfp to compile and test with IAR --- .github/workflows/build.yml | 10 ++-------- .github/workflows/ci_set_matrix.py | 8 -------- .github/workflows/hil_test.yml | 40 +++++++++++++++++++++++++++++++++++++- 3 files changed, 41 insertions(+), 17 deletions(-) (limited to '.github') diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml index 283b72061..67482c748 100644 --- a/.github/workflows/build.yml +++ b/.github/workflows/build.yml @@ -113,13 +113,12 @@ jobs: # Build IAR on HFP self-hosted # --------------------------------------- arm-iar: - if: github.repository_owner == 'hathach' + if: github.repository_owner == 'hathach' && github.event_name == 'push' needs: set-matrix runs-on: [self-hosted, Linux, X64, hifiphile] env: BUILD_ARGS: ${{ join(fromJSON(needs.set-matrix.outputs.json)['arm-iar'], ' ') }} - IAR_LMS_CLOUD_URL: https://license.cloud.iar.com - IAR_LMS_BEARER_TOKEN: ${{ secrets.IAR_LMS_BEARER_TOKEN }} + # IAR_LMS_BEARER_TOKEN: ${{ secrets.IAR_LMS_BEARER_TOKEN }} steps: - name: Clean workspace run: | @@ -138,8 +137,3 @@ jobs: - name: Build run: python3 tools/build.py --one-per-family --toolchain iar $BUILD_ARGS - - - name: Test on actual hardware (hardware in the loop) - if: github.event_name == 'pull_request' - run: | - python3 test/hil/hil_test.py hfp.json diff --git a/.github/workflows/ci_set_matrix.py b/.github/workflows/ci_set_matrix.py index 78fcac68a..410508246 100755 --- a/.github/workflows/ci_set_matrix.py +++ b/.github/workflows/ci_set_matrix.py @@ -55,14 +55,6 @@ def set_matrix_json(): for toolchain in toolchain_list: filtered_families = [family for family, supported_toolchain in family_list.items() if toolchain in supported_toolchain] - - # always add board in hfp.json for arm-iar - if toolchain == 'arm-iar': - with open('test/hil/hfp.json') as f: - hfp_data = json.load(f) - hfp_boards = [f"-b{board['name']}" for board in hfp_data['boards']] - filtered_families = filtered_families + hfp_boards - matrix[toolchain] = filtered_families print(json.dumps(matrix)) diff --git a/.github/workflows/hil_test.yml b/.github/workflows/hil_test.yml index c6e7f33b0..bfa2b5704 100644 --- a/.github/workflows/hil_test.yml +++ b/.github/workflows/hil_test.yml @@ -58,7 +58,7 @@ jobs: # --------------------------------------- # Hardware in the loop (HIL) - # self-hosted running on an VM. For attached hardware checkout HIL_JSON + # self-hosted on local VM, for attached hardware checkout HIL_JSON # --------------------------------------- hil-tinyusb: if: github.repository_owner == 'hathach' @@ -86,3 +86,41 @@ jobs: run: | ls cmake-build/ python3 test/hil/hil_test.py ${{ env.HIL_JSON }} + + # --------------------------------------- + # Hardware in the loop (HIL) + # self-hosted by HFP, build with IAR toolchain, for attached hardware checkout test/hil/hfp.json + # --------------------------------------- + hil-hfp: + if: github.repository_owner == 'hathach' + runs-on: [self-hosted, Linux, X64, hifiphile] + #env: + # IAR_LMS_BEARER_TOKEN: ${{ secrets.IAR_LMS_BEARER_TOKEN }} + steps: + - name: Clean workspace + run: | + echo "Cleaning up previous run" + rm -rf "${{ github.workspace }}" + mkdir -p "${{ github.workspace }}" + + - name: Toolchain version + run: iccarm --version + + - name: Checkout TinyUSB + uses: actions/checkout@v4 + + - name: Get build boards + run: | + MATRIX_JSON=$(python test/hil/hil_ci_set_matrix.py test/hil/hfp.json) + BUILD_ARGS=$(echo $MATRIX_JSON | jq -r '.["arm-gcc"] | join(" ")') + echo "BUILD_ARGS=$BUILD_ARGS" + echo "BUILD_ARGS=$BUILD_ARGS" >> $GITHUB_ENV + + - name: Get Dependencies + run: python3 tools/get_deps.py $BUILD_ARGS + + - name: Build + run: python3 tools/build.py --toolchain iar $BUILD_ARGS + + - name: Test on actual hardware (hardware in the loop) + run: python3 test/hil/hil_test.py hfp.json -- cgit v1.3.1 From 7e207e4f4a098fddb13efc329e57e6095aa13873 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 16 Dec 2024 23:48:44 +0700 Subject: fix warning due to bsp_rom_registers.c --- .github/workflows/pre-commit.yml | 1 + hw/bsp/ra/family.cmake | 1 + 2 files changed, 2 insertions(+) (limited to '.github') diff --git a/.github/workflows/pre-commit.yml b/.github/workflows/pre-commit.yml index 530484079..f751dc44d 100644 --- a/.github/workflows/pre-commit.yml +++ b/.github/workflows/pre-commit.yml @@ -33,6 +33,7 @@ jobs: - name: Build Fuzzer run: | + clang --version export CC=clang export CXX=clang++ fuzz_harness=$(ls -d test/fuzz/device/*/) diff --git a/hw/bsp/ra/family.cmake b/hw/bsp/ra/family.cmake index d4d795ae5..ceb1e48bd 100644 --- a/hw/bsp/ra/family.cmake +++ b/hw/bsp/ra/family.cmake @@ -134,6 +134,7 @@ function(family_configure_example TARGET RTOS) ) target_compile_options(${TARGET} PUBLIC -Wno-error=undef + -Wno-error=strict-prototypes ) # # RA has custom freertos port -- cgit v1.3.1 From 73ec14d926ea9418a4ed467e61a25782c3011752 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 17 Dec 2024 00:32:58 +0700 Subject: install libc++ for clang build fuzzer --- .github/workflows/pre-commit.yml | 1 + 1 file changed, 1 insertion(+) (limited to '.github') diff --git a/.github/workflows/pre-commit.yml b/.github/workflows/pre-commit.yml index f751dc44d..ed0efd66e 100644 --- a/.github/workflows/pre-commit.yml +++ b/.github/workflows/pre-commit.yml @@ -33,6 +33,7 @@ jobs: - name: Build Fuzzer run: | + sudo apt install libc++-dev libc++abi-dev clang --version export CC=clang export CXX=clang++ -- cgit v1.3.1 From f74ee9c4ed21795e26fdc96af0195657fa404811 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 17 Dec 2024 10:51:44 +0700 Subject: change rx url --- .circleci/config2.yml | 2 +- .github/actions/setup_toolchain/action.yml | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to '.github') diff --git a/.circleci/config2.yml b/.circleci/config2.yml index e6ae87e77..c3bf2a270 100644 --- a/.circleci/config2.yml +++ b/.circleci/config2.yml @@ -16,7 +16,7 @@ commands: "arm-gcc": "https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v13.2.1-1.1/xpack-arm-none-eabi-gcc-13.2.1-1.1-linux-x64.tar.gz", "msp430-gcc": "http://software-dl.ti.com/msp430/msp430_public_sw/mcu/msp430/MSPGCC/9_2_0_0/export/msp430-gcc-9.2.0.50_linux64.tar.bz2", "riscv-gcc": "https://github.com/xpack-dev-tools/riscv-none-elf-gcc-xpack/releases/download/v13.2.0-2/xpack-riscv-none-elf-gcc-13.2.0-2-linux-x64.tar.gz", - "rx-gcc": "https://llvm-gcc-renesas.com/downloads/get.php?f=rx/8.3.0.202004-gnurx/gcc-8.3.0.202004-GNURX-ELF.run", + "rx-gcc": "https://github.com/hathach/rx_device/releases/download/0.0.1/gcc-8.3.0.202411-GNURX-ELF.run", "arm-iar": "https://updates.iar.com/FileStore/STANDARD/001/003/322/cxarm-9.60.3.deb" }' toolchain_url=$(echo $TOOLCHAIN_JSON | jq -r '.["<< parameters.toolchain >>"]') diff --git a/.github/actions/setup_toolchain/action.yml b/.github/actions/setup_toolchain/action.yml index 8406a812d..484001cda 100644 --- a/.github/actions/setup_toolchain/action.yml +++ b/.github/actions/setup_toolchain/action.yml @@ -41,7 +41,7 @@ runs: "arm-clang": "https://github.com/ARM-software/LLVM-embedded-toolchain-for-Arm/releases/download/release-19.1.1/LLVM-ET-Arm-19.1.1-Linux-x86_64.tar.xz", "msp430-gcc": "http://software-dl.ti.com/msp430/msp430_public_sw/mcu/msp430/MSPGCC/9_2_0_0/export/msp430-gcc-9.2.0.50_linux64.tar.bz2", "riscv-gcc": "https://github.com/xpack-dev-tools/riscv-none-elf-gcc-xpack/releases/download/v13.2.0-2/xpack-riscv-none-elf-gcc-13.2.0-2-linux-x64.tar.gz", - "rx-gcc": "http://gcc-renesas.com/downloads/get.php?f=rx/8.3.0.202004-gnurx/gcc-8.3.0.202004-GNURX-ELF.run" + "rx-gcc": "https://github.com/hathach/rx_device/releases/download/0.0.1/gcc-8.3.0.202411-GNURX-ELF.run" }' TOOLCHAIN_URL=$(echo $TOOLCHAIN_JSON | jq -r '.["${{ inputs.toolchain }}"]') echo "toolchain_url=$TOOLCHAIN_URL" -- cgit v1.3.1 From 2109b801d400cf8b019bc38ed12a18dd84f0f337 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 16 Jan 2025 11:32:13 +0700 Subject: update esp-idf to 5.3.2 --- .circleci/config2.yml | 2 +- .github/actions/setup_toolchain/action.yml | 4 ---- .github/actions/setup_toolchain/espressif/action.yml | 9 ++++++++- .github/workflows/build_util.yml | 3 +-- 4 files changed, 10 insertions(+), 8 deletions(-) (limited to '.github') diff --git a/.circleci/config2.yml b/.circleci/config2.yml index c3bf2a270..d33307445 100644 --- a/.circleci/config2.yml +++ b/.circleci/config2.yml @@ -114,7 +114,7 @@ commands: name: Build command: | if [ << parameters.toolchain >> == esp-idf ]; then - docker run --rm -v $PWD:/project -w /project espressif/idf:v5.3.1 python tools/build.py << parameters.family >> + docker run --rm -v $PWD:/project -w /project espressif/idf:v5.3.2 python tools/build.py << parameters.family >> else # Toolchain option default is gcc if [ << parameters.toolchain >> == arm-clang ]; then diff --git a/.github/actions/setup_toolchain/action.yml b/.github/actions/setup_toolchain/action.yml index 484001cda..8305daa24 100644 --- a/.github/actions/setup_toolchain/action.yml +++ b/.github/actions/setup_toolchain/action.yml @@ -4,9 +4,6 @@ inputs: toolchain: description: 'Toolchain name' required: true - toolchain_version: - description: 'Toolchain version' - required: false outputs: build_option: @@ -27,7 +24,6 @@ runs: uses: ./.github/actions/setup_toolchain/espressif with: toolchain: ${{ inputs.toolchain }} - toolchain_version: ${{ inputs.toolchain_version }} - name: Get Toolchain URL if: >- diff --git a/.github/actions/setup_toolchain/espressif/action.yml b/.github/actions/setup_toolchain/espressif/action.yml index 1e3ce18f1..b50ffd41d 100644 --- a/.github/actions/setup_toolchain/espressif/action.yml +++ b/.github/actions/setup_toolchain/espressif/action.yml @@ -6,7 +6,8 @@ inputs: required: true toolchain_version: description: 'Toolchain version' - required: true + required: false + default: 'v5.3.2' runs: using: "composite" @@ -39,3 +40,9 @@ runs: du -sh $DOCKER_ESP_IDF docker load --input $DOCKER_ESP_IDF shell: bash + + - name: Tag Local Image + run: | + docker tag espressif/idf:${{ inputs.toolchain_version }} espressif/idf:tinyusb + docker images + shell: bash diff --git a/.github/workflows/build_util.yml b/.github/workflows/build_util.yml index 706ded1c1..2de68c6f3 100644 --- a/.github/workflows/build_util.yml +++ b/.github/workflows/build_util.yml @@ -41,7 +41,6 @@ jobs: uses: ./.github/actions/setup_toolchain with: toolchain: ${{ inputs.toolchain }} - toolchain_version: 'v5.3.1' - name: Get Dependencies uses: ./.github/actions/get_deps @@ -61,7 +60,7 @@ jobs: - name: Build run: | if [ "${{ inputs.toolchain }}" == "esp-idf" ]; then - docker run --rm -v $PWD:/project -w /project espressif/idf:v5.3.1 python tools/build.py ${{ matrix.arg }} + docker run --rm -v $PWD:/project -w /project espressif/idf:tinyusb python tools/build.py ${{ matrix.arg }} else python tools/build.py -s ${{ inputs.build-system }} ${{ steps.setup-toolchain.outputs.build_option }} ${{ steps.set-one-per-family.outputs.build_option }} ${{ matrix.arg }} fi -- cgit v1.3.1 From 786aa2cd1cf075c253d0906b28860c78ef9b06ef Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 20 Jan 2025 23:45:57 +0700 Subject: use IAR toke for hfp runner since normal IAR license is expired --- .github/workflows/build.yml | 2 +- .github/workflows/hil_test.yml | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to '.github') diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml index 67482c748..170f73fae 100644 --- a/.github/workflows/build.yml +++ b/.github/workflows/build.yml @@ -118,7 +118,7 @@ jobs: runs-on: [self-hosted, Linux, X64, hifiphile] env: BUILD_ARGS: ${{ join(fromJSON(needs.set-matrix.outputs.json)['arm-iar'], ' ') }} - # IAR_LMS_BEARER_TOKEN: ${{ secrets.IAR_LMS_BEARER_TOKEN }} + IAR_LMS_BEARER_TOKEN: ${{ secrets.IAR_LMS_BEARER_TOKEN }} steps: - name: Clean workspace run: | diff --git a/.github/workflows/hil_test.yml b/.github/workflows/hil_test.yml index bfa2b5704..3f32bdb5d 100644 --- a/.github/workflows/hil_test.yml +++ b/.github/workflows/hil_test.yml @@ -94,8 +94,8 @@ jobs: hil-hfp: if: github.repository_owner == 'hathach' runs-on: [self-hosted, Linux, X64, hifiphile] - #env: - # IAR_LMS_BEARER_TOKEN: ${{ secrets.IAR_LMS_BEARER_TOKEN }} + env: + IAR_LMS_BEARER_TOKEN: ${{ secrets.IAR_LMS_BEARER_TOKEN }} steps: - name: Clean workspace run: | -- cgit v1.3.1 From 201b9707b9e6ce576fd534347b36652f2c6173f0 Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 24 Jan 2025 00:52:24 +0700 Subject: try build zephyr with ci --- .github/workflows/build.yml | 27 ++++++++++++++++++++++++--- .west/config | 6 ------ examples/west.yml | 2 +- hw/bsp/family_support.cmake | 2 +- 4 files changed, 26 insertions(+), 11 deletions(-) delete mode 100644 .west/config (limited to '.github') diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml index 170f73fae..060129d0f 100644 --- a/.github/workflows/build.yml +++ b/.github/workflows/build.yml @@ -59,7 +59,7 @@ jobs: toolchain: # - 'arm-clang' is built by circle-ci in PR - 'aarch64-gcc' - - 'arm-gcc' +# - 'arm-gcc' - 'msp430-gcc' - 'riscv-gcc' with: @@ -72,7 +72,7 @@ jobs: # Build Make (built by circle-ci in PR, only build on push here) # --------------------------------------- make: - if: github.event_name == 'push' + if: github.event_name == 'push' && false needs: set-matrix uses: ./.github/workflows/build_util.yml strategy: @@ -113,7 +113,7 @@ jobs: # Build IAR on HFP self-hosted # --------------------------------------- arm-iar: - if: github.repository_owner == 'hathach' && github.event_name == 'push' + if: github.repository_owner == 'hathach' && github.event_name == 'push' && false needs: set-matrix runs-on: [self-hosted, Linux, X64, hifiphile] env: @@ -137,3 +137,24 @@ jobs: - name: Build run: python3 tools/build.py --one-per-family --toolchain iar $BUILD_ARGS + + # --------------------------------------- + # Zephyr + # --------------------------------------- + zephyr: + if: github.event_name == 'push' + runs-on: ubuntu-latest + steps: + - name: Checkout TinyUSB + uses: actions/checkout@v4 + + - name: Setup Zephyr project + uses: zephyrproject-rtos/action-zephyr-setup@v1 + with: + app-path: examples + toolchains: arm-zephyr-eabi + + - name: Build + run: | + west build -b pca10056 examples/device/cdc_msc + west build -b pca10056 examples/device/msc_dual_lun diff --git a/.west/config b/.west/config deleted file mode 100644 index 2518007f6..000000000 --- a/.west/config +++ /dev/null @@ -1,6 +0,0 @@ -[manifest] -path = examples -file = west.yml - -[zephyr] -base = lib/zephyr diff --git a/examples/west.yml b/examples/west.yml index 383815c45..0683f6861 100644 --- a/examples/west.yml +++ b/examples/west.yml @@ -6,7 +6,7 @@ manifest: - name: zephyr remote: zephyrproject-rtos revision: main - path: lib/zephyr + path: zephyr import: true self: path: . diff --git a/hw/bsp/family_support.cmake b/hw/bsp/family_support.cmake index 6ba7cb1c7..14916f771 100644 --- a/hw/bsp/family_support.cmake +++ b/hw/bsp/family_support.cmake @@ -75,7 +75,7 @@ endif() if (BUILD_ZEPHYR) set(BOARD_ROOT ${TOP}/hw/bsp/${FAMILY}) - find_package(Zephyr REQUIRED HINTS ${TOP}/lib/zephyr) + find_package(Zephyr REQUIRED HINTS ${TOP}/zephyr) endif () #------------------------------------------------------------- -- cgit v1.3.1 From 13856af9350965e5d67e1e76d16e3702e77aa77e Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 24 Jan 2025 15:15:31 +0700 Subject: add -DRTOS=zephyr to ci west build --- .github/workflows/build.yml | 4 +- examples/device/msc_dual_lun/prj.conf | 6 + hw/bsp/family_support.cmake | 1 + hw/bsp/nrf/boards/pca10056/zephyr/Kconfig.pca10056 | 5 + hw/bsp/nrf/boards/pca10056/zephyr/board.yml | 6 + .../pca10056/zephyr/pca10056_nrf52840-pinctrl.dtsi | 187 ++++++++++++++ .../boards/pca10056/zephyr/pca10056_nrf52840.dts | 278 +++++++++++++++++++++ .../boards/pca10056/zephyr/pca10056_nrf52840.yaml | 28 +++ 8 files changed, 513 insertions(+), 2 deletions(-) create mode 100644 examples/device/msc_dual_lun/prj.conf create mode 100644 hw/bsp/nrf/boards/pca10056/zephyr/Kconfig.pca10056 create mode 100644 hw/bsp/nrf/boards/pca10056/zephyr/board.yml create mode 100644 hw/bsp/nrf/boards/pca10056/zephyr/pca10056_nrf52840-pinctrl.dtsi create mode 100644 hw/bsp/nrf/boards/pca10056/zephyr/pca10056_nrf52840.dts create mode 100644 hw/bsp/nrf/boards/pca10056/zephyr/pca10056_nrf52840.yaml (limited to '.github') diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml index 060129d0f..90bc10883 100644 --- a/.github/workflows/build.yml +++ b/.github/workflows/build.yml @@ -156,5 +156,5 @@ jobs: - name: Build run: | - west build -b pca10056 examples/device/cdc_msc - west build -b pca10056 examples/device/msc_dual_lun + west -v build -b pca10056 -d examples/device/cdc_msc/build examples/device/cdc_msc -- -DRTOS=zephyr + west -v build -b pca10056 -d examples/device/msc_dual_lun/build examples/device/msc_dual_lun -- -DRTOS=zephyr diff --git a/examples/device/msc_dual_lun/prj.conf b/examples/device/msc_dual_lun/prj.conf new file mode 100644 index 000000000..2f5139d9d --- /dev/null +++ b/examples/device/msc_dual_lun/prj.conf @@ -0,0 +1,6 @@ +CONFIG_GPIO=y +CONFIG_FPU=y +CONFIG_NO_OPTIMIZATIONS=y +CONFIG_UART_INTERRUPT_DRIVEN=y +CONFIG_NRFX_POWER=y +CONFIG_NRFX_UARTE0=y diff --git a/hw/bsp/family_support.cmake b/hw/bsp/family_support.cmake index 1e86529ed..1725f0de6 100644 --- a/hw/bsp/family_support.cmake +++ b/hw/bsp/family_support.cmake @@ -81,6 +81,7 @@ endif() if (RTOS STREQUAL zephyr) set(BOARD_ROOT ${TOP}/hw/bsp/${FAMILY}) + cmake_print_variables(BOARD_ROOT BOARD) find_package(Zephyr REQUIRED HINTS ${TOP}/zephyr) endif () diff --git a/hw/bsp/nrf/boards/pca10056/zephyr/Kconfig.pca10056 b/hw/bsp/nrf/boards/pca10056/zephyr/Kconfig.pca10056 new file mode 100644 index 000000000..a4d9619b3 --- /dev/null +++ b/hw/bsp/nrf/boards/pca10056/zephyr/Kconfig.pca10056 @@ -0,0 +1,5 @@ +# Copyright (c) 2022 Zephyr Project members and individual contributors +# SPDX-License-Identifier: Apache-2.0 + +config BOARD_PCA10056 + select SOC_NRF52840_QIAA diff --git a/hw/bsp/nrf/boards/pca10056/zephyr/board.yml b/hw/bsp/nrf/boards/pca10056/zephyr/board.yml new file mode 100644 index 000000000..e45a33365 --- /dev/null +++ b/hw/bsp/nrf/boards/pca10056/zephyr/board.yml @@ -0,0 +1,6 @@ +board: + name: pca10056 + full_name: nRF52840 DK + vendor: nordic + socs: + - name: nrf52840 diff --git a/hw/bsp/nrf/boards/pca10056/zephyr/pca10056_nrf52840-pinctrl.dtsi b/hw/bsp/nrf/boards/pca10056/zephyr/pca10056_nrf52840-pinctrl.dtsi new file mode 100644 index 000000000..779d0d518 --- /dev/null +++ b/hw/bsp/nrf/boards/pca10056/zephyr/pca10056_nrf52840-pinctrl.dtsi @@ -0,0 +1,187 @@ +/* + * Copyright (c) 2022 Nordic Semiconductor + * SPDX-License-Identifier: Apache-2.0 + */ + +&pinctrl { + uart0_default: uart0_default { + group1 { + psels = , + ; + }; + group2 { + psels = , + ; + bias-pull-up; + }; + }; + + uart0_sleep: uart0_sleep { + group1 { + psels = , + , + , + ; + low-power-enable; + }; + }; + + uart1_default: uart1_default { + group1 { + psels = ; + bias-pull-up; + }; + group2 { + psels = ; + }; + }; + + uart1_sleep: uart1_sleep { + group1 { + psels = , + ; + low-power-enable; + }; + }; + + i2c0_default: i2c0_default { + group1 { + psels = , + ; + }; + }; + + i2c0_sleep: i2c0_sleep { + group1 { + psels = , + ; + low-power-enable; + }; + }; + + i2c1_default: i2c1_default { + group1 { + psels = , + ; + }; + }; + + i2c1_sleep: i2c1_sleep { + group1 { + psels = , + ; + low-power-enable; + }; + }; + + pwm0_default: pwm0_default { + group1 { + psels = ; + nordic,invert; + }; + }; + + pwm0_sleep: pwm0_sleep { + group1 { + psels = ; + low-power-enable; + }; + }; + + spi0_default: spi0_default { + group1 { + psels = , + , + ; + }; + }; + + spi0_sleep: spi0_sleep { + group1 { + psels = , + , + ; + low-power-enable; + }; + }; + + spi1_default: spi1_default { + group1 { + psels = , + , + ; + }; + }; + + spi1_sleep: spi1_sleep { + group1 { + psels = , + , + ; + low-power-enable; + }; + }; + + spi2_default: spi2_default { + group1 { + psels = , + , + ; + }; + }; + + spi2_sleep: spi2_sleep { + group1 { + psels = , + , + ; + low-power-enable; + }; + }; + + qspi_default: qspi_default { + group1 { + psels = , + , + , + , + , + ; + nordic,drive-mode = ; + }; + }; + + qspi_sleep: qspi_sleep { + group1 { + psels = , + , + , + , + ; + low-power-enable; + }; + group2 { + psels = ; + low-power-enable; + bias-pull-up; + }; + }; + + spi3_default: spi3_default { + group1 { + psels = , + , + ; + }; + }; + + spi3_sleep: spi3_sleep { + group1 { + psels = , + , + ; + low-power-enable; + }; + }; + +}; diff --git a/hw/bsp/nrf/boards/pca10056/zephyr/pca10056_nrf52840.dts b/hw/bsp/nrf/boards/pca10056/zephyr/pca10056_nrf52840.dts new file mode 100644 index 000000000..d7c9266d2 --- /dev/null +++ b/hw/bsp/nrf/boards/pca10056/zephyr/pca10056_nrf52840.dts @@ -0,0 +1,278 @@ +/* + * Copyright (c) 2017 Linaro Limited + * + * SPDX-License-Identifier: Apache-2.0 + */ + +/dts-v1/; +#include +#include +#include "pca10056_nrf52840-pinctrl.dtsi" +#include + +/ { + model = "Nordic nRF52840 DK NRF52840"; + compatible = "nordic,nrf52840-dk-nrf52840"; + + chosen { + zephyr,console = &uart0; + zephyr,shell-uart = &uart0; + zephyr,uart-mcumgr = &uart0; + zephyr,bt-mon-uart = &uart0; + zephyr,bt-c2h-uart = &uart0; + zephyr,ieee802154 = &ieee802154; + }; + + leds { + compatible = "gpio-leds"; + led0: led_0 { + gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; + label = "Green LED 0"; + }; + led1: led_1 { + gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; + label = "Green LED 1"; + }; + led2: led_2 { + gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; + label = "Green LED 2"; + }; + led3: led_3 { + gpios = <&gpio0 16 GPIO_ACTIVE_LOW>; + label = "Green LED 3"; + }; + }; + + pwmleds { + compatible = "pwm-leds"; + pwm_led0: pwm_led_0 { + pwms = <&pwm0 0 PWM_MSEC(20) PWM_POLARITY_INVERTED>; + }; + }; + + buttons { + compatible = "gpio-keys"; + button0: button_0 { + gpios = <&gpio0 11 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>; + label = "Push button switch 0"; + zephyr,code = ; + }; + button1: button_1 { + gpios = <&gpio0 12 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>; + label = "Push button switch 1"; + zephyr,code = ; + }; + button2: button_2 { + gpios = <&gpio0 24 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>; + label = "Push button switch 2"; + zephyr,code = ; + }; + button3: button_3 { + gpios = <&gpio0 25 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>; + label = "Push button switch 3"; + zephyr,code = ; + }; + }; + + arduino_header: connector { + compatible = "arduino-header-r3"; + #gpio-cells = <2>; + gpio-map-mask = <0xffffffff 0xffffffc0>; + gpio-map-pass-thru = <0 0x3f>; + gpio-map = <0 0 &gpio0 3 0>, /* A0 */ + <1 0 &gpio0 4 0>, /* A1 */ + <2 0 &gpio0 28 0>, /* A2 */ + <3 0 &gpio0 29 0>, /* A3 */ + <4 0 &gpio0 30 0>, /* A4 */ + <5 0 &gpio0 31 0>, /* A5 */ + <6 0 &gpio1 1 0>, /* D0 */ + <7 0 &gpio1 2 0>, /* D1 */ + <8 0 &gpio1 3 0>, /* D2 */ + <9 0 &gpio1 4 0>, /* D3 */ + <10 0 &gpio1 5 0>, /* D4 */ + <11 0 &gpio1 6 0>, /* D5 */ + <12 0 &gpio1 7 0>, /* D6 */ + <13 0 &gpio1 8 0>, /* D7 */ + <14 0 &gpio1 10 0>, /* D8 */ + <15 0 &gpio1 11 0>, /* D9 */ + <16 0 &gpio1 12 0>, /* D10 */ + <17 0 &gpio1 13 0>, /* D11 */ + <18 0 &gpio1 14 0>, /* D12 */ + <19 0 &gpio1 15 0>, /* D13 */ + <20 0 &gpio0 26 0>, /* D14 */ + <21 0 &gpio0 27 0>; /* D15 */ + }; + + arduino_adc: analog-connector { + compatible = "arduino,uno-adc"; + #io-channel-cells = <1>; + io-channel-map = <0 &adc 1>, /* A0 = P0.3 = AIN1 */ + <1 &adc 2>, /* A1 = P0.4 = AIN2 */ + <2 &adc 4>, /* A2 = P0.28 = AIN4 */ + <3 &adc 5>, /* A3 = P0.29 = AIN5 */ + <4 &adc 6>, /* A4 = P0.30 = AIN6 */ + <5 &adc 7>; /* A5 = P0.31 = AIN7 */ + }; + + /* These aliases are provided for compatibility with samples */ + aliases { + led0 = &led0; + led1 = &led1; + led2 = &led2; + led3 = &led3; + pwm-led0 = &pwm_led0; + sw0 = &button0; + sw1 = &button1; + sw2 = &button2; + sw3 = &button3; + bootloader-led0 = &led0; + mcuboot-button0 = &button0; + mcuboot-led0 = &led0; + watchdog0 = &wdt0; + }; +}; + +®0 { + status = "okay"; +}; + +®1 { + regulator-initial-mode = ; +}; + +&adc { + status = "okay"; +}; + +&uicr { + gpio-as-nreset; +}; + +&gpiote { + status = "okay"; +}; + +&gpio0 { + status = "okay"; + gpio-reserved-ranges = <0 2>, <6 1>, <8 3>, <17 7>; + gpio-line-names = "XL1", "XL2", "AREF", "A0", "A1", "RTS", "TXD", + "CTS", "RXD", "NFC1", "NFC2", "BUTTON1", "BUTTON2", "LED1", + "LED2", "LED3", "LED4", "QSPI CS", "RESET", "QSPI CLK", + "QSPI DIO0", "QSPI DIO1", "QSPI DIO2", "QSPI DIO3","BUTTON3", + "BUTTON4", "SDA", "SCL", "A2", "A3", "A4", "A5"; +}; + +&gpio1 { + status = "okay"; + gpio-line-names = "", "D0", "D1", "D2", "D3", "D4", "D5", "D6", + "D7", "", "D8", "D9", "D10", "D11", "D12", "D13"; +}; + +&uart0 { + compatible = "nordic,nrf-uarte"; + status = "okay"; + current-speed = <115200>; + pinctrl-0 = <&uart0_default>; + pinctrl-1 = <&uart0_sleep>; + pinctrl-names = "default", "sleep"; +}; + +arduino_serial: &uart1 { + current-speed = <115200>; + pinctrl-0 = <&uart1_default>; + pinctrl-1 = <&uart1_sleep>; + pinctrl-names = "default", "sleep"; +}; + +arduino_i2c: &i2c0 { + compatible = "nordic,nrf-twi"; + status = "okay"; + pinctrl-0 = <&i2c0_default>; + pinctrl-1 = <&i2c0_sleep>; + pinctrl-names = "default", "sleep"; +}; + +&i2c1 { + compatible = "nordic,nrf-twi"; + /* Cannot be used together with spi1. */ + /* status = "okay"; */ + pinctrl-0 = <&i2c1_default>; + pinctrl-1 = <&i2c1_sleep>; + pinctrl-names = "default", "sleep"; +}; + +&pwm0 { + status = "okay"; + pinctrl-0 = <&pwm0_default>; + pinctrl-1 = <&pwm0_sleep>; + pinctrl-names = "default", "sleep"; +}; + +&spi0 { + compatible = "nordic,nrf-spi"; + /* Cannot be used together with i2c0. */ + /* status = "okay"; */ + pinctrl-0 = <&spi0_default>; + pinctrl-1 = <&spi0_sleep>; + pinctrl-names = "default", "sleep"; +}; + +&spi1 { + compatible = "nordic,nrf-spi"; + status = "okay"; + pinctrl-0 = <&spi1_default>; + pinctrl-1 = <&spi1_sleep>; + pinctrl-names = "default", "sleep"; +}; + +&spi2 { + compatible = "nordic,nrf-spi"; + status = "disabled"; + pinctrl-0 = <&spi2_default>; + pinctrl-1 = <&spi2_sleep>; + pinctrl-names = "default", "sleep"; +}; + +&qspi { + status = "okay"; + pinctrl-0 = <&qspi_default>; + pinctrl-1 = <&qspi_sleep>; + pinctrl-names = "default", "sleep"; + mx25r64: mx25r6435f@0 { + compatible = "nordic,qspi-nor"; + reg = <0>; + /* MX25R64 supports only pp and pp4io */ + writeoc = "pp4io"; + /* MX25R64 supports all readoc options */ + readoc = "read4io"; + sck-frequency = <8000000>; + jedec-id = [c2 28 17]; + sfdp-bfp = [ + e5 20 f1 ff ff ff ff 03 44 eb 08 6b 08 3b 04 bb + ee ff ff ff ff ff 00 ff ff ff 00 ff 0c 20 0f 52 + 10 d8 00 ff 23 72 f5 00 82 ed 04 cc 44 83 68 44 + 30 b0 30 b0 f7 c4 d5 5c 00 be 29 ff f0 d0 ff ff + ]; + size = <67108864>; + has-dpd; + t-enter-dpd = <10000>; + t-exit-dpd = <35000>; + }; +}; + +arduino_spi: &spi3 { + status = "okay"; + cs-gpios = <&arduino_header 16 GPIO_ACTIVE_LOW>; /* D10 */ + pinctrl-0 = <&spi3_default>; + pinctrl-1 = <&spi3_sleep>; + pinctrl-names = "default", "sleep"; +}; + +&ieee802154 { + status = "okay"; +}; + +zephyr_udc0: &usbd { + compatible = "nordic,nrf-usbd"; + status = "okay"; +}; diff --git a/hw/bsp/nrf/boards/pca10056/zephyr/pca10056_nrf52840.yaml b/hw/bsp/nrf/boards/pca10056/zephyr/pca10056_nrf52840.yaml new file mode 100644 index 000000000..74b077dce --- /dev/null +++ b/hw/bsp/nrf/boards/pca10056/zephyr/pca10056_nrf52840.yaml @@ -0,0 +1,28 @@ +identifier: pca10056/nrf52840 +name: nRF52840-DK-NRF52840 +type: mcu +arch: arm +ram: 256 +flash: 1024 +toolchain: + - zephyr + - gnuarmemb + - xtools +supported: + - adc + - arduino_gpio + - arduino_i2c + - arduino_serial + - arduino_spi + - ble + - counter + - gpio + - i2c + - i2s + - pwm + - spi + - usb_device + - usbd + - watchdog + - netif:openthread +vendor: nordic -- cgit v1.3.1 From 1003aba69066b87db67b0d90318aa79630afb338 Mon Sep 17 00:00:00 2001 From: hathach Date: Sat, 25 Jan 2025 12:39:08 +0700 Subject: use board alias for pca10056 --- .github/workflows/build.yml | 4 +- hw/bsp/family_support.cmake | 16 +- hw/bsp/nrf/boards/pca10056/board_aliases.cmake | 1 - hw/bsp/nrf/boards/pca10056/zephyr/Kconfig.pca10056 | 5 - hw/bsp/nrf/boards/pca10056/zephyr/board.yml | 6 - .../pca10056/zephyr/pca10056_nrf52840-pinctrl.dtsi | 187 -------------- .../boards/pca10056/zephyr/pca10056_nrf52840.dts | 278 --------------------- .../boards/pca10056/zephyr/pca10056_nrf52840.yaml | 28 --- hw/bsp/nrf/family.cmake | 4 + hw/bsp/zephyr_board_aliases.cmake | 1 + 10 files changed, 16 insertions(+), 514 deletions(-) delete mode 100644 hw/bsp/nrf/boards/pca10056/board_aliases.cmake delete mode 100644 hw/bsp/nrf/boards/pca10056/zephyr/Kconfig.pca10056 delete mode 100644 hw/bsp/nrf/boards/pca10056/zephyr/board.yml delete mode 100644 hw/bsp/nrf/boards/pca10056/zephyr/pca10056_nrf52840-pinctrl.dtsi delete mode 100644 hw/bsp/nrf/boards/pca10056/zephyr/pca10056_nrf52840.dts delete mode 100644 hw/bsp/nrf/boards/pca10056/zephyr/pca10056_nrf52840.yaml create mode 100644 hw/bsp/zephyr_board_aliases.cmake (limited to '.github') diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml index 90bc10883..cd5619a44 100644 --- a/.github/workflows/build.yml +++ b/.github/workflows/build.yml @@ -156,5 +156,5 @@ jobs: - name: Build run: | - west -v build -b pca10056 -d examples/device/cdc_msc/build examples/device/cdc_msc -- -DRTOS=zephyr - west -v build -b pca10056 -d examples/device/msc_dual_lun/build examples/device/msc_dual_lun -- -DRTOS=zephyr + west build -b pca10056 -d examples/device/cdc_msc/build examples/device/cdc_msc -- -DRTOS=zephyr + west build -b pca10056 -d examples/device/msc_dual_lun/build examples/device/msc_dual_lun -- -DRTOS=zephyr diff --git a/hw/bsp/family_support.cmake b/hw/bsp/family_support.cmake index 1725f0de6..ccf07f21f 100644 --- a/hw/bsp/family_support.cmake +++ b/hw/bsp/family_support.cmake @@ -79,12 +79,6 @@ if (NOT NO_WARN_RWX_SEGMENTS_SUPPORTED) set(NO_WARN_RWX_SEGMENTS_SUPPORTED 1) endif() -if (RTOS STREQUAL zephyr) - set(BOARD_ROOT ${TOP}/hw/bsp/${FAMILY}) - cmake_print_variables(BOARD_ROOT BOARD) - find_package(Zephyr REQUIRED HINTS ${TOP}/zephyr) -endif () - #------------------------------------------------------------- # Functions #------------------------------------------------------------- @@ -604,7 +598,6 @@ function(family_flash_msp430flasher TARGET) ) endfunction() - function(family_flash_uniflash TARGET) if (NOT DEFINED DSLITE) set(DSLITE dslite.sh) @@ -637,3 +630,12 @@ endif () # save it in case of re-inclusion set(FAMILY_MCUS ${FAMILY_MCUS} CACHE INTERNAL "") + +#---------------------------------- +# Zephyr +#---------------------------------- +if (RTOS STREQUAL zephyr) + set(BOARD_ROOT ${TOP}/hw/bsp/${FAMILY}) + set(ZEPHYR_BOARD_ALIASES ${CMAKE_CURRENT_LIST_DIR}/zephyr_board_aliases.cmake) + find_package(Zephyr REQUIRED HINTS ${TOP}/zephyr) +endif () diff --git a/hw/bsp/nrf/boards/pca10056/board_aliases.cmake b/hw/bsp/nrf/boards/pca10056/board_aliases.cmake deleted file mode 100644 index 91ffc3a39..000000000 --- a/hw/bsp/nrf/boards/pca10056/board_aliases.cmake +++ /dev/null @@ -1 +0,0 @@ -set(pca10056_BOARD_ALIAS nrf52840dk/nrf52840) diff --git a/hw/bsp/nrf/boards/pca10056/zephyr/Kconfig.pca10056 b/hw/bsp/nrf/boards/pca10056/zephyr/Kconfig.pca10056 deleted file mode 100644 index a4d9619b3..000000000 --- a/hw/bsp/nrf/boards/pca10056/zephyr/Kconfig.pca10056 +++ /dev/null @@ -1,5 +0,0 @@ -# Copyright (c) 2022 Zephyr Project members and individual contributors -# SPDX-License-Identifier: Apache-2.0 - -config BOARD_PCA10056 - select SOC_NRF52840_QIAA diff --git a/hw/bsp/nrf/boards/pca10056/zephyr/board.yml b/hw/bsp/nrf/boards/pca10056/zephyr/board.yml deleted file mode 100644 index e45a33365..000000000 --- a/hw/bsp/nrf/boards/pca10056/zephyr/board.yml +++ /dev/null @@ -1,6 +0,0 @@ -board: - name: pca10056 - full_name: nRF52840 DK - vendor: nordic - socs: - - name: nrf52840 diff --git a/hw/bsp/nrf/boards/pca10056/zephyr/pca10056_nrf52840-pinctrl.dtsi b/hw/bsp/nrf/boards/pca10056/zephyr/pca10056_nrf52840-pinctrl.dtsi deleted file mode 100644 index 779d0d518..000000000 --- a/hw/bsp/nrf/boards/pca10056/zephyr/pca10056_nrf52840-pinctrl.dtsi +++ /dev/null @@ -1,187 +0,0 @@ -/* - * Copyright (c) 2022 Nordic Semiconductor - * SPDX-License-Identifier: Apache-2.0 - */ - -&pinctrl { - uart0_default: uart0_default { - group1 { - psels = , - ; - }; - group2 { - psels = , - ; - bias-pull-up; - }; - }; - - uart0_sleep: uart0_sleep { - group1 { - psels = , - , - , - ; - low-power-enable; - }; - }; - - uart1_default: uart1_default { - group1 { - psels = ; - bias-pull-up; - }; - group2 { - psels = ; - }; - }; - - uart1_sleep: uart1_sleep { - group1 { - psels = , - ; - low-power-enable; - }; - }; - - i2c0_default: i2c0_default { - group1 { - psels = , - ; - }; - }; - - i2c0_sleep: i2c0_sleep { - group1 { - psels = , - ; - low-power-enable; - }; - }; - - i2c1_default: i2c1_default { - group1 { - psels = , - ; - }; - }; - - i2c1_sleep: i2c1_sleep { - group1 { - psels = , - ; - low-power-enable; - }; - }; - - pwm0_default: pwm0_default { - group1 { - psels = ; - nordic,invert; - }; - }; - - pwm0_sleep: pwm0_sleep { - group1 { - psels = ; - low-power-enable; - }; - }; - - spi0_default: spi0_default { - group1 { - psels = , - , - ; - }; - }; - - spi0_sleep: spi0_sleep { - group1 { - psels = , - , - ; - low-power-enable; - }; - }; - - spi1_default: spi1_default { - group1 { - psels = , - , - ; - }; - }; - - spi1_sleep: spi1_sleep { - group1 { - psels = , - , - ; - low-power-enable; - }; - }; - - spi2_default: spi2_default { - group1 { - psels = , - , - ; - }; - }; - - spi2_sleep: spi2_sleep { - group1 { - psels = , - , - ; - low-power-enable; - }; - }; - - qspi_default: qspi_default { - group1 { - psels = , - , - , - , - , - ; - nordic,drive-mode = ; - }; - }; - - qspi_sleep: qspi_sleep { - group1 { - psels = , - , - , - , - ; - low-power-enable; - }; - group2 { - psels = ; - low-power-enable; - bias-pull-up; - }; - }; - - spi3_default: spi3_default { - group1 { - psels = , - , - ; - }; - }; - - spi3_sleep: spi3_sleep { - group1 { - psels = , - , - ; - low-power-enable; - }; - }; - -}; diff --git a/hw/bsp/nrf/boards/pca10056/zephyr/pca10056_nrf52840.dts b/hw/bsp/nrf/boards/pca10056/zephyr/pca10056_nrf52840.dts deleted file mode 100644 index d7c9266d2..000000000 --- a/hw/bsp/nrf/boards/pca10056/zephyr/pca10056_nrf52840.dts +++ /dev/null @@ -1,278 +0,0 @@ -/* - * Copyright (c) 2017 Linaro Limited - * - * SPDX-License-Identifier: Apache-2.0 - */ - -/dts-v1/; -#include -#include -#include "pca10056_nrf52840-pinctrl.dtsi" -#include - -/ { - model = "Nordic nRF52840 DK NRF52840"; - compatible = "nordic,nrf52840-dk-nrf52840"; - - chosen { - zephyr,console = &uart0; - zephyr,shell-uart = &uart0; - zephyr,uart-mcumgr = &uart0; - zephyr,bt-mon-uart = &uart0; - zephyr,bt-c2h-uart = &uart0; - zephyr,ieee802154 = &ieee802154; - }; - - leds { - compatible = "gpio-leds"; - led0: led_0 { - gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; - label = "Green LED 0"; - }; - led1: led_1 { - gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; - label = "Green LED 1"; - }; - led2: led_2 { - gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; - label = "Green LED 2"; - }; - led3: led_3 { - gpios = <&gpio0 16 GPIO_ACTIVE_LOW>; - label = "Green LED 3"; - }; - }; - - pwmleds { - compatible = "pwm-leds"; - pwm_led0: pwm_led_0 { - pwms = <&pwm0 0 PWM_MSEC(20) PWM_POLARITY_INVERTED>; - }; - }; - - buttons { - compatible = "gpio-keys"; - button0: button_0 { - gpios = <&gpio0 11 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>; - label = "Push button switch 0"; - zephyr,code = ; - }; - button1: button_1 { - gpios = <&gpio0 12 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>; - label = "Push button switch 1"; - zephyr,code = ; - }; - button2: button_2 { - gpios = <&gpio0 24 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>; - label = "Push button switch 2"; - zephyr,code = ; - }; - button3: button_3 { - gpios = <&gpio0 25 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>; - label = "Push button switch 3"; - zephyr,code = ; - }; - }; - - arduino_header: connector { - compatible = "arduino-header-r3"; - #gpio-cells = <2>; - gpio-map-mask = <0xffffffff 0xffffffc0>; - gpio-map-pass-thru = <0 0x3f>; - gpio-map = <0 0 &gpio0 3 0>, /* A0 */ - <1 0 &gpio0 4 0>, /* A1 */ - <2 0 &gpio0 28 0>, /* A2 */ - <3 0 &gpio0 29 0>, /* A3 */ - <4 0 &gpio0 30 0>, /* A4 */ - <5 0 &gpio0 31 0>, /* A5 */ - <6 0 &gpio1 1 0>, /* D0 */ - <7 0 &gpio1 2 0>, /* D1 */ - <8 0 &gpio1 3 0>, /* D2 */ - <9 0 &gpio1 4 0>, /* D3 */ - <10 0 &gpio1 5 0>, /* D4 */ - <11 0 &gpio1 6 0>, /* D5 */ - <12 0 &gpio1 7 0>, /* D6 */ - <13 0 &gpio1 8 0>, /* D7 */ - <14 0 &gpio1 10 0>, /* D8 */ - <15 0 &gpio1 11 0>, /* D9 */ - <16 0 &gpio1 12 0>, /* D10 */ - <17 0 &gpio1 13 0>, /* D11 */ - <18 0 &gpio1 14 0>, /* D12 */ - <19 0 &gpio1 15 0>, /* D13 */ - <20 0 &gpio0 26 0>, /* D14 */ - <21 0 &gpio0 27 0>; /* D15 */ - }; - - arduino_adc: analog-connector { - compatible = "arduino,uno-adc"; - #io-channel-cells = <1>; - io-channel-map = <0 &adc 1>, /* A0 = P0.3 = AIN1 */ - <1 &adc 2>, /* A1 = P0.4 = AIN2 */ - <2 &adc 4>, /* A2 = P0.28 = AIN4 */ - <3 &adc 5>, /* A3 = P0.29 = AIN5 */ - <4 &adc 6>, /* A4 = P0.30 = AIN6 */ - <5 &adc 7>; /* A5 = P0.31 = AIN7 */ - }; - - /* These aliases are provided for compatibility with samples */ - aliases { - led0 = &led0; - led1 = &led1; - led2 = &led2; - led3 = &led3; - pwm-led0 = &pwm_led0; - sw0 = &button0; - sw1 = &button1; - sw2 = &button2; - sw3 = &button3; - bootloader-led0 = &led0; - mcuboot-button0 = &button0; - mcuboot-led0 = &led0; - watchdog0 = &wdt0; - }; -}; - -®0 { - status = "okay"; -}; - -®1 { - regulator-initial-mode = ; -}; - -&adc { - status = "okay"; -}; - -&uicr { - gpio-as-nreset; -}; - -&gpiote { - status = "okay"; -}; - -&gpio0 { - status = "okay"; - gpio-reserved-ranges = <0 2>, <6 1>, <8 3>, <17 7>; - gpio-line-names = "XL1", "XL2", "AREF", "A0", "A1", "RTS", "TXD", - "CTS", "RXD", "NFC1", "NFC2", "BUTTON1", "BUTTON2", "LED1", - "LED2", "LED3", "LED4", "QSPI CS", "RESET", "QSPI CLK", - "QSPI DIO0", "QSPI DIO1", "QSPI DIO2", "QSPI DIO3","BUTTON3", - "BUTTON4", "SDA", "SCL", "A2", "A3", "A4", "A5"; -}; - -&gpio1 { - status = "okay"; - gpio-line-names = "", "D0", "D1", "D2", "D3", "D4", "D5", "D6", - "D7", "", "D8", "D9", "D10", "D11", "D12", "D13"; -}; - -&uart0 { - compatible = "nordic,nrf-uarte"; - status = "okay"; - current-speed = <115200>; - pinctrl-0 = <&uart0_default>; - pinctrl-1 = <&uart0_sleep>; - pinctrl-names = "default", "sleep"; -}; - -arduino_serial: &uart1 { - current-speed = <115200>; - pinctrl-0 = <&uart1_default>; - pinctrl-1 = <&uart1_sleep>; - pinctrl-names = "default", "sleep"; -}; - -arduino_i2c: &i2c0 { - compatible = "nordic,nrf-twi"; - status = "okay"; - pinctrl-0 = <&i2c0_default>; - pinctrl-1 = <&i2c0_sleep>; - pinctrl-names = "default", "sleep"; -}; - -&i2c1 { - compatible = "nordic,nrf-twi"; - /* Cannot be used together with spi1. */ - /* status = "okay"; */ - pinctrl-0 = <&i2c1_default>; - pinctrl-1 = <&i2c1_sleep>; - pinctrl-names = "default", "sleep"; -}; - -&pwm0 { - status = "okay"; - pinctrl-0 = <&pwm0_default>; - pinctrl-1 = <&pwm0_sleep>; - pinctrl-names = "default", "sleep"; -}; - -&spi0 { - compatible = "nordic,nrf-spi"; - /* Cannot be used together with i2c0. */ - /* status = "okay"; */ - pinctrl-0 = <&spi0_default>; - pinctrl-1 = <&spi0_sleep>; - pinctrl-names = "default", "sleep"; -}; - -&spi1 { - compatible = "nordic,nrf-spi"; - status = "okay"; - pinctrl-0 = <&spi1_default>; - pinctrl-1 = <&spi1_sleep>; - pinctrl-names = "default", "sleep"; -}; - -&spi2 { - compatible = "nordic,nrf-spi"; - status = "disabled"; - pinctrl-0 = <&spi2_default>; - pinctrl-1 = <&spi2_sleep>; - pinctrl-names = "default", "sleep"; -}; - -&qspi { - status = "okay"; - pinctrl-0 = <&qspi_default>; - pinctrl-1 = <&qspi_sleep>; - pinctrl-names = "default", "sleep"; - mx25r64: mx25r6435f@0 { - compatible = "nordic,qspi-nor"; - reg = <0>; - /* MX25R64 supports only pp and pp4io */ - writeoc = "pp4io"; - /* MX25R64 supports all readoc options */ - readoc = "read4io"; - sck-frequency = <8000000>; - jedec-id = [c2 28 17]; - sfdp-bfp = [ - e5 20 f1 ff ff ff ff 03 44 eb 08 6b 08 3b 04 bb - ee ff ff ff ff ff 00 ff ff ff 00 ff 0c 20 0f 52 - 10 d8 00 ff 23 72 f5 00 82 ed 04 cc 44 83 68 44 - 30 b0 30 b0 f7 c4 d5 5c 00 be 29 ff f0 d0 ff ff - ]; - size = <67108864>; - has-dpd; - t-enter-dpd = <10000>; - t-exit-dpd = <35000>; - }; -}; - -arduino_spi: &spi3 { - status = "okay"; - cs-gpios = <&arduino_header 16 GPIO_ACTIVE_LOW>; /* D10 */ - pinctrl-0 = <&spi3_default>; - pinctrl-1 = <&spi3_sleep>; - pinctrl-names = "default", "sleep"; -}; - -&ieee802154 { - status = "okay"; -}; - -zephyr_udc0: &usbd { - compatible = "nordic,nrf-usbd"; - status = "okay"; -}; diff --git a/hw/bsp/nrf/boards/pca10056/zephyr/pca10056_nrf52840.yaml b/hw/bsp/nrf/boards/pca10056/zephyr/pca10056_nrf52840.yaml deleted file mode 100644 index 74b077dce..000000000 --- a/hw/bsp/nrf/boards/pca10056/zephyr/pca10056_nrf52840.yaml +++ /dev/null @@ -1,28 +0,0 @@ -identifier: pca10056/nrf52840 -name: nRF52840-DK-NRF52840 -type: mcu -arch: arm -ram: 256 -flash: 1024 -toolchain: - - zephyr - - gnuarmemb - - xtools -supported: - - adc - - arduino_gpio - - arduino_i2c - - arduino_serial - - arduino_spi - - ble - - counter - - gpio - - i2c - - i2s - - pwm - - spi - - usb_device - - usbd - - watchdog - - netif:openthread -vendor: nordic diff --git a/hw/bsp/nrf/family.cmake b/hw/bsp/nrf/family.cmake index 2d2a12e7e..f4c9bd63f 100644 --- a/hw/bsp/nrf/family.cmake +++ b/hw/bsp/nrf/family.cmake @@ -130,6 +130,10 @@ function(family_configure_example TARGET RTOS) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} ) + if (RTOS STREQUAL zephyr AND DEFINED BOARD_ALIAS AND NOT BOARD STREQUAL BOARD_ALIAS) + target_include_directories(${TARGET} PUBLIC ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD_ALIAS}) + endif () + # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_NRF5X) diff --git a/hw/bsp/zephyr_board_aliases.cmake b/hw/bsp/zephyr_board_aliases.cmake new file mode 100644 index 000000000..91ffc3a39 --- /dev/null +++ b/hw/bsp/zephyr_board_aliases.cmake @@ -0,0 +1 @@ +set(pca10056_BOARD_ALIAS nrf52840dk/nrf52840) -- cgit v1.3.1 From 6b3a5957c2e84a093854eaf6afea352d67324136 Mon Sep 17 00:00:00 2001 From: hathach Date: Sat, 25 Jan 2025 16:08:40 +0700 Subject: cmake remove EXAMPLE-tinyusb target as library --- .github/workflows/build.yml | 6 +++--- hw/bsp/broadcom_32bit/family.cmake | 7 +++---- hw/bsp/broadcom_64bit/family.cmake | 7 +++---- hw/bsp/ch32v10x/family.cmake | 7 +++---- hw/bsp/ch32v20x/family.cmake | 7 +++---- hw/bsp/ch32v307/family.cmake | 7 +++---- hw/bsp/da1469x/family.cmake | 7 +++---- hw/bsp/f1c100s/family.cmake | 7 +++---- hw/bsp/fomu/family.cmake | 7 +++---- hw/bsp/gd32vf103/family.cmake | 7 +++---- hw/bsp/imxrt/family.cmake | 7 +++---- hw/bsp/kinetis_k/family.cmake | 7 +++---- hw/bsp/kinetis_k32l2/family.cmake | 7 +++---- hw/bsp/kinetis_kl/family.cmake | 7 +++---- hw/bsp/lpc11/family.cmake | 7 +++---- hw/bsp/lpc13/family.cmake | 7 +++---- hw/bsp/lpc15/family.cmake | 7 +++---- hw/bsp/lpc17/family.cmake | 7 +++---- hw/bsp/lpc18/family.cmake | 7 +++---- hw/bsp/lpc40/family.cmake | 7 +++---- hw/bsp/lpc43/family.cmake | 7 +++---- hw/bsp/lpc51/family.cmake | 7 +++---- hw/bsp/lpc54/family.cmake | 7 +++---- hw/bsp/lpc55/family.cmake | 7 +++---- hw/bsp/max32650/family.cmake | 9 ++++----- hw/bsp/max32666/family.cmake | 9 ++++----- hw/bsp/max32690/family.cmake | 9 ++++----- hw/bsp/max78002/family.cmake | 9 ++++----- hw/bsp/mcx/family.cmake | 7 +++---- hw/bsp/mm32/family.cmake | 7 +++---- hw/bsp/msp430/family.cmake | 6 ++---- hw/bsp/msp432e4/family.cmake | 7 +++---- hw/bsp/nrf/family.cmake | 5 ++--- hw/bsp/ra/family.cmake | 7 +++---- hw/bsp/samd11/family.cmake | 7 +++---- hw/bsp/samg/family.cmake | 7 +++---- hw/bsp/saml2x/family.cmake | 7 +++---- hw/bsp/stm32c0/family.cmake | 7 +++---- hw/bsp/stm32f0/family.cmake | 7 +++---- hw/bsp/stm32f1/family.cmake | 7 +++---- hw/bsp/stm32f2/family.cmake | 7 +++---- hw/bsp/stm32f3/family.cmake | 7 +++---- hw/bsp/stm32f4/family.cmake | 7 +++---- hw/bsp/stm32f7/family.cmake | 7 +++---- hw/bsp/stm32g0/family.cmake | 7 +++---- hw/bsp/stm32g4/family.cmake | 7 +++---- hw/bsp/stm32h5/family.cmake | 7 +++---- hw/bsp/stm32h7/family.cmake | 7 +++---- hw/bsp/stm32l0/family.cmake | 7 +++---- hw/bsp/stm32l4/family.cmake | 7 +++---- hw/bsp/stm32u5/family.cmake | 7 +++---- hw/bsp/stm32wb/family.cmake | 7 +++---- hw/bsp/tm4c/family.cmake | 7 +++---- hw/bsp/xmc4000/family.cmake | 7 +++---- 54 files changed, 164 insertions(+), 218 deletions(-) (limited to '.github') diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml index cd5619a44..355b6b5c4 100644 --- a/.github/workflows/build.yml +++ b/.github/workflows/build.yml @@ -59,7 +59,7 @@ jobs: toolchain: # - 'arm-clang' is built by circle-ci in PR - 'aarch64-gcc' -# - 'arm-gcc' + - 'arm-gcc' - 'msp430-gcc' - 'riscv-gcc' with: @@ -72,7 +72,7 @@ jobs: # Build Make (built by circle-ci in PR, only build on push here) # --------------------------------------- make: - if: github.event_name == 'push' && false + if: github.event_name == 'push' needs: set-matrix uses: ./.github/workflows/build_util.yml strategy: @@ -113,7 +113,7 @@ jobs: # Build IAR on HFP self-hosted # --------------------------------------- arm-iar: - if: github.repository_owner == 'hathach' && github.event_name == 'push' && false + if: github.repository_owner == 'hathach' && github.event_name == 'push' needs: set-matrix runs-on: [self-hosted, Linux, X64, hifiphile] env: diff --git a/hw/bsp/broadcom_32bit/family.cmake b/hw/bsp/broadcom_32bit/family.cmake index 18227f702..5e57d8b1e 100644 --- a/hw/bsp/broadcom_32bit/family.cmake +++ b/hw/bsp/broadcom_32bit/family.cmake @@ -95,15 +95,14 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_BCM2835) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c ${TOP}/src/portable/synopsys/dwc2/dwc2_common.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/broadcom_64bit/family.cmake b/hw/bsp/broadcom_64bit/family.cmake index f5245be36..1a088c2c0 100644 --- a/hw/bsp/broadcom_64bit/family.cmake +++ b/hw/bsp/broadcom_64bit/family.cmake @@ -102,15 +102,14 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_BCM${BCM_VERSION}) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c ${TOP}/src/portable/synopsys/dwc2/dwc2_common.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/ch32v10x/family.cmake b/hw/bsp/ch32v10x/family.cmake index 9b395e92d..a73898050 100644 --- a/hw/bsp/ch32v10x/family.cmake +++ b/hw/bsp/ch32v10x/family.cmake @@ -100,13 +100,12 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_CH32V103) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/wch/dcd_ch32_usbfs.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/ch32v20x/family.cmake b/hw/bsp/ch32v20x/family.cmake index 9748184c2..a5976e0ea 100644 --- a/hw/bsp/ch32v20x/family.cmake +++ b/hw/bsp/ch32v20x/family.cmake @@ -125,14 +125,13 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_CH32V20X) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/wch/dcd_ch32_usbfs.c ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/ch32v307/family.cmake b/hw/bsp/ch32v307/family.cmake index e4b84198c..446e850c5 100644 --- a/hw/bsp/ch32v307/family.cmake +++ b/hw/bsp/ch32v307/family.cmake @@ -114,14 +114,13 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_CH32V307) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/wch/dcd_ch32_usbhs.c ${TOP}/src/portable/wch/dcd_ch32_usbfs.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/da1469x/family.cmake b/hw/bsp/da1469x/family.cmake index 7bb6f5d86..20d6cbc44 100644 --- a/hw/bsp/da1469x/family.cmake +++ b/hw/bsp/da1469x/family.cmake @@ -127,13 +127,12 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_DA1469X) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/dialog/da146xx/dcd_da146xx.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/f1c100s/family.cmake b/hw/bsp/f1c100s/family.cmake index 0565f7545..211c6645c 100644 --- a/hw/bsp/f1c100s/family.cmake +++ b/hw/bsp/f1c100s/family.cmake @@ -101,13 +101,12 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_F1C100S) - target_sources(${TARGET}-tinyusb PRIVATE + target_sources(${TARGET} PRIVATE ${TOP}/src/portable/sunxi/dcd_sunxi_musb.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/fomu/family.cmake b/hw/bsp/fomu/family.cmake index d8141a7b3..639373695 100644 --- a/hw/bsp/fomu/family.cmake +++ b/hw/bsp/fomu/family.cmake @@ -78,13 +78,12 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_VALENTYUSB_EPTRI) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/valentyusb/eptri/dcd_eptri.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/gd32vf103/family.cmake b/hw/bsp/gd32vf103/family.cmake index 5b145692f..a47871b38 100644 --- a/hw/bsp/gd32vf103/family.cmake +++ b/hw/bsp/gd32vf103/family.cmake @@ -106,15 +106,14 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_GD32VF103) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c ${TOP}/src/portable/synopsys/dwc2/dwc2_common.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/imxrt/family.cmake b/hw/bsp/imxrt/family.cmake index 8ec96bf33..f08ccb3e5 100644 --- a/hw/bsp/imxrt/family.cmake +++ b/hw/bsp/imxrt/family.cmake @@ -139,15 +139,14 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_MIMXRT1XXX) - target_sources(${TARGET}-tinyusb PRIVATE + target_sources(${TARGET} PRIVATE ${TOP}/src/portable/chipidea/ci_hs/dcd_ci_hs.c ${TOP}/src/portable/chipidea/ci_hs/hcd_ci_hs.c ${TOP}/src/portable/ehci/ehci.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/kinetis_k/family.cmake b/hw/bsp/kinetis_k/family.cmake index e9993ed7b..ce91777c9 100644 --- a/hw/bsp/kinetis_k/family.cmake +++ b/hw/bsp/kinetis_k/family.cmake @@ -98,14 +98,13 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_KINETIS_K) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/chipidea/ci_fs/dcd_ci_fs.c ${TOP}/src/portable/nxp/khci/hcd_khci.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/kinetis_k32l2/family.cmake b/hw/bsp/kinetis_k32l2/family.cmake index a76b05745..946614a03 100644 --- a/hw/bsp/kinetis_k32l2/family.cmake +++ b/hw/bsp/kinetis_k32l2/family.cmake @@ -93,14 +93,13 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_KINETIS_K32L) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/nxp/khci/dcd_khci.c ${TOP}/src/portable/nxp/khci/hcd_khci.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_flash_jlink(${TARGET}) diff --git a/hw/bsp/kinetis_kl/family.cmake b/hw/bsp/kinetis_kl/family.cmake index c0ca0e77a..51a646258 100644 --- a/hw/bsp/kinetis_kl/family.cmake +++ b/hw/bsp/kinetis_kl/family.cmake @@ -97,14 +97,13 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_KINETIS_KL) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/chipidea/ci_fs/dcd_ci_fs.c ${TOP}/src/portable/nxp/khci/hcd_khci.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/lpc11/family.cmake b/hw/bsp/lpc11/family.cmake index e11268bb2..a9febfc7f 100644 --- a/hw/bsp/lpc11/family.cmake +++ b/hw/bsp/lpc11/family.cmake @@ -91,13 +91,12 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_LPC11UXX) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/lpc13/family.cmake b/hw/bsp/lpc13/family.cmake index 500ddb3b0..e3c0b18c7 100644 --- a/hw/bsp/lpc13/family.cmake +++ b/hw/bsp/lpc13/family.cmake @@ -88,13 +88,12 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_LPC13XX) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/lpc15/family.cmake b/hw/bsp/lpc15/family.cmake index daad44bc0..761c5a619 100644 --- a/hw/bsp/lpc15/family.cmake +++ b/hw/bsp/lpc15/family.cmake @@ -90,13 +90,12 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_LPC15XX) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/lpc17/family.cmake b/hw/bsp/lpc17/family.cmake index 7e7f036de..771a0f405 100644 --- a/hw/bsp/lpc17/family.cmake +++ b/hw/bsp/lpc17/family.cmake @@ -87,15 +87,14 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_LPC175X_6X) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/nxp/lpc17_40/dcd_lpc17_40.c ${TOP}/src/portable/nxp/lpc17_40/hcd_lpc17_40.c ${TOP}/src/portable/ohci/ohci.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/lpc18/family.cmake b/hw/bsp/lpc18/family.cmake index 5542496f0..6af1149bf 100644 --- a/hw/bsp/lpc18/family.cmake +++ b/hw/bsp/lpc18/family.cmake @@ -85,15 +85,14 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_LPC18XX) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/chipidea/ci_hs/dcd_ci_hs.c ${TOP}/src/portable/chipidea/ci_hs/hcd_ci_hs.c ${TOP}/src/portable/ehci/ehci.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/lpc40/family.cmake b/hw/bsp/lpc40/family.cmake index afbf6a22f..3a680eae6 100644 --- a/hw/bsp/lpc40/family.cmake +++ b/hw/bsp/lpc40/family.cmake @@ -88,15 +88,14 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_LPC40XX) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/nxp/lpc17_40/dcd_lpc17_40.c ${TOP}/src/portable/nxp/lpc17_40/hcd_lpc17_40.c ${TOP}/src/portable/ohci/ohci.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/lpc43/family.cmake b/hw/bsp/lpc43/family.cmake index 620b4baa2..9d993a698 100644 --- a/hw/bsp/lpc43/family.cmake +++ b/hw/bsp/lpc43/family.cmake @@ -93,15 +93,14 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_LPC43XX) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/chipidea/ci_hs/dcd_ci_hs.c ${TOP}/src/portable/chipidea/ci_hs/hcd_ci_hs.c ${TOP}/src/portable/ehci/ehci.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/lpc51/family.cmake b/hw/bsp/lpc51/family.cmake index be3e9f02d..2146c29f7 100644 --- a/hw/bsp/lpc51/family.cmake +++ b/hw/bsp/lpc51/family.cmake @@ -107,13 +107,12 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_LPC51) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/lpc54/family.cmake b/hw/bsp/lpc54/family.cmake index af5ee823b..90497b9fb 100644 --- a/hw/bsp/lpc54/family.cmake +++ b/hw/bsp/lpc54/family.cmake @@ -140,13 +140,12 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_LPC54) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/lpc55/family.cmake b/hw/bsp/lpc55/family.cmake index 2d99daf21..cd1eb5f78 100644 --- a/hw/bsp/lpc55/family.cmake +++ b/hw/bsp/lpc55/family.cmake @@ -141,13 +141,12 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_LPC55) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/max32650/family.cmake b/hw/bsp/max32650/family.cmake index d114e0948..b1d5dded7 100644 --- a/hw/bsp/max32650/family.cmake +++ b/hw/bsp/max32650/family.cmake @@ -131,20 +131,19 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_MAX32650) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/mentor/musb/dcd_musb.c ) target_compile_options(${TARGET} PRIVATE -Wno-error=strict-prototypes ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) - target_compile_options(${TARGET}-tinyusb PRIVATE + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + target_compile_options(${TARGET} PRIVATE -Wno-error=strict-prototypes ) - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) + # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/max32666/family.cmake b/hw/bsp/max32666/family.cmake index a78e74670..49798729a 100644 --- a/hw/bsp/max32666/family.cmake +++ b/hw/bsp/max32666/family.cmake @@ -126,20 +126,19 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_MAX32666) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/mentor/musb/dcd_musb.c ) target_compile_options(${TARGET} PRIVATE -Wno-error=strict-prototypes ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) - target_compile_options(${TARGET}-tinyusb PRIVATE + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + target_compile_options(${TARGET} PRIVATE -Wno-error=strict-prototypes ) - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) + # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/max32690/family.cmake b/hw/bsp/max32690/family.cmake index d79403dee..0d544d9e6 100644 --- a/hw/bsp/max32690/family.cmake +++ b/hw/bsp/max32690/family.cmake @@ -131,20 +131,19 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_MAX32690) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/mentor/musb/dcd_musb.c ) target_compile_options(${TARGET} PRIVATE -Wno-error=strict-prototypes ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) - target_compile_options(${TARGET}-tinyusb PRIVATE + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + target_compile_options(${TARGET} PRIVATE -Wno-error=strict-prototypes ) - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) + # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/max78002/family.cmake b/hw/bsp/max78002/family.cmake index 7e65f58ed..ce0fcfa08 100644 --- a/hw/bsp/max78002/family.cmake +++ b/hw/bsp/max78002/family.cmake @@ -135,17 +135,16 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_MAX78002) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/mentor/musb/dcd_musb.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) - target_compile_options(${TARGET}-tinyusb PRIVATE + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + target_compile_options(${TARGET} PRIVATE -Wno-error=strict-prototypes -Wno-error=redundant-decls ) - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) + # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/mcx/family.cmake b/hw/bsp/mcx/family.cmake index 8eed8f19b..413c1b372 100644 --- a/hw/bsp/mcx/family.cmake +++ b/hw/bsp/mcx/family.cmake @@ -115,14 +115,13 @@ function(family_configure_example TARGET RTOS) family_add_tinyusb(${TARGET} OPT_MCU_MCXA15) endif() - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC # TinyUSB: Port0 is chipidea FS, Port1 is chipidea HS ${TOP}/src/portable/chipidea/$ ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/mm32/family.cmake b/hw/bsp/mm32/family.cmake index eea1ae85e..0561a63a0 100644 --- a/hw/bsp/mm32/family.cmake +++ b/hw/bsp/mm32/family.cmake @@ -88,13 +88,12 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_MM32F327X) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/mindmotion/mm32/dcd_mm32f327x_otg.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/msp430/family.cmake b/hw/bsp/msp430/family.cmake index 94e045ae5..ddd54b675 100644 --- a/hw/bsp/msp430/family.cmake +++ b/hw/bsp/msp430/family.cmake @@ -70,13 +70,11 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_MSP430x5xx) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/ti/msp430x5xx/dcd_msp430x5xx.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/msp432e4/family.cmake b/hw/bsp/msp432e4/family.cmake index b46af45fa..f6939ecfe 100644 --- a/hw/bsp/msp432e4/family.cmake +++ b/hw/bsp/msp432e4/family.cmake @@ -86,14 +86,13 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_MSP432E4) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/mentor/musb/dcd_musb.c ${TOP}/src/portable/mentor/musb/hcd_musb.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/nrf/family.cmake b/hw/bsp/nrf/family.cmake index abfab1609..7d0a9f6de 100644 --- a/hw/bsp/nrf/family.cmake +++ b/hw/bsp/nrf/family.cmake @@ -4,9 +4,8 @@ set(NRFX_PATH ${TOP}/hw/mcu/nordic/nrfx) set(CMSIS_DIR ${TOP}/lib/CMSIS_5) # include board specific, for zephyr BOARD_ALIAS may be used instead -if (EXISTS ${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) - include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) -else () +include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake OPTIONAL RESULT_VARIABLE board_cmake_included) +if (NOT board_cmake_included) include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD_ALIAS}/board.cmake) endif () diff --git a/hw/bsp/ra/family.cmake b/hw/bsp/ra/family.cmake index 8ae8e9b59..42a32631c 100644 --- a/hw/bsp/ra/family.cmake +++ b/hw/bsp/ra/family.cmake @@ -148,15 +148,14 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_RAXXX) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/renesas/rusb2/dcd_rusb2.c ${TOP}/src/portable/renesas/rusb2/hcd_rusb2.c ${TOP}/src/portable/renesas/rusb2/rusb2_common.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_flash_jlink(${TARGET}) diff --git a/hw/bsp/samd11/family.cmake b/hw/bsp/samd11/family.cmake index 4a40ca063..965b1cfb5 100644 --- a/hw/bsp/samd11/family.cmake +++ b/hw/bsp/samd11/family.cmake @@ -101,13 +101,12 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_SAMD11) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/microchip/samd/dcd_samd.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/samg/family.cmake b/hw/bsp/samg/family.cmake index aef17d379..eb00c8c52 100644 --- a/hw/bsp/samg/family.cmake +++ b/hw/bsp/samg/family.cmake @@ -99,13 +99,12 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_SAMG) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/microchip/samg/dcd_samg.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/saml2x/family.cmake b/hw/bsp/saml2x/family.cmake index 37e282a18..49f2e3e75 100644 --- a/hw/bsp/saml2x/family.cmake +++ b/hw/bsp/saml2x/family.cmake @@ -101,13 +101,12 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_SAML22) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/microchip/samd/dcd_samd.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/stm32c0/family.cmake b/hw/bsp/stm32c0/family.cmake index ca6a93adf..c6a90fff6 100644 --- a/hw/bsp/stm32c0/family.cmake +++ b/hw/bsp/stm32c0/family.cmake @@ -103,14 +103,13 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_STM32C0) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c ${TOP}/src/portable/st/typec/typec_stm32.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/stm32f0/family.cmake b/hw/bsp/stm32f0/family.cmake index c0da094d7..12c7b592c 100644 --- a/hw/bsp/stm32f0/family.cmake +++ b/hw/bsp/stm32f0/family.cmake @@ -101,13 +101,12 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_STM32F0) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/stm32f1/family.cmake b/hw/bsp/stm32f1/family.cmake index 4eba6df93..cbb9c3568 100644 --- a/hw/bsp/stm32f1/family.cmake +++ b/hw/bsp/stm32f1/family.cmake @@ -100,13 +100,12 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_STM32F1) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/stm32f2/family.cmake b/hw/bsp/stm32f2/family.cmake index 6a22d1550..dc6bc2885 100644 --- a/hw/bsp/stm32f2/family.cmake +++ b/hw/bsp/stm32f2/family.cmake @@ -100,15 +100,14 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_STM32F2) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c ${TOP}/src/portable/synopsys/dwc2/dwc2_common.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/stm32f3/family.cmake b/hw/bsp/stm32f3/family.cmake index 053bbbacc..0ba2920d5 100644 --- a/hw/bsp/stm32f3/family.cmake +++ b/hw/bsp/stm32f3/family.cmake @@ -98,13 +98,12 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_STM32F3) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/stm32f4/family.cmake b/hw/bsp/stm32f4/family.cmake index 5f12eb8b2..db5736192 100644 --- a/hw/bsp/stm32f4/family.cmake +++ b/hw/bsp/stm32f4/family.cmake @@ -126,15 +126,14 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_STM32F4) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c ${TOP}/src/portable/synopsys/dwc2/dwc2_common.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/stm32f7/family.cmake b/hw/bsp/stm32f7/family.cmake index 8cc18935d..1a3365332 100644 --- a/hw/bsp/stm32f7/family.cmake +++ b/hw/bsp/stm32f7/family.cmake @@ -128,15 +128,14 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_STM32F7) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c ${TOP}/src/portable/synopsys/dwc2/dwc2_common.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/stm32g0/family.cmake b/hw/bsp/stm32g0/family.cmake index 2ab5719bc..4da26f27e 100644 --- a/hw/bsp/stm32g0/family.cmake +++ b/hw/bsp/stm32g0/family.cmake @@ -102,14 +102,13 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_STM32G0) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c ${TOP}/src/portable/st/typec/typec_stm32.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/stm32g4/family.cmake b/hw/bsp/stm32g4/family.cmake index d51b3599a..5ec9926fe 100644 --- a/hw/bsp/stm32g4/family.cmake +++ b/hw/bsp/stm32g4/family.cmake @@ -98,14 +98,13 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_STM32G4) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c ${TOP}/src/portable/st/typec/typec_stm32.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/stm32h5/family.cmake b/hw/bsp/stm32h5/family.cmake index 54392fe1a..1df6bcb90 100644 --- a/hw/bsp/stm32h5/family.cmake +++ b/hw/bsp/stm32h5/family.cmake @@ -102,14 +102,13 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_STM32H5) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c ${TOP}/src/portable/st/typec/typec_stm32.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/stm32h7/family.cmake b/hw/bsp/stm32h7/family.cmake index e50bbf4a2..b4f0bebbf 100644 --- a/hw/bsp/stm32h7/family.cmake +++ b/hw/bsp/stm32h7/family.cmake @@ -133,15 +133,14 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_STM32H7) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c ${TOP}/src/portable/synopsys/dwc2/dwc2_common.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/stm32l0/family.cmake b/hw/bsp/stm32l0/family.cmake index 435c658ec..954bdb158 100644 --- a/hw/bsp/stm32l0/family.cmake +++ b/hw/bsp/stm32l0/family.cmake @@ -102,13 +102,12 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_STM32L0) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/stm32l4/family.cmake b/hw/bsp/stm32l4/family.cmake index 4d2ccf178..eebcff4f3 100644 --- a/hw/bsp/stm32l4/family.cmake +++ b/hw/bsp/stm32l4/family.cmake @@ -102,16 +102,15 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_${FAMILY_MCUS}) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c ${TOP}/src/portable/synopsys/dwc2/dwc2_common.c ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/stm32u5/family.cmake b/hw/bsp/stm32u5/family.cmake index 2cbe5cf38..7a5935961 100644 --- a/hw/bsp/stm32u5/family.cmake +++ b/hw/bsp/stm32u5/family.cmake @@ -102,17 +102,16 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_STM32U5) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c ${TOP}/src/portable/synopsys/dwc2/dwc2_common.c #${TOP}/src/portable/st/typec/typec_stm32.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/stm32wb/family.cmake b/hw/bsp/stm32wb/family.cmake index d6d841baa..0ea937257 100644 --- a/hw/bsp/stm32wb/family.cmake +++ b/hw/bsp/stm32wb/family.cmake @@ -105,13 +105,12 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_${FAMILY_MCUS}) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/tm4c/family.cmake b/hw/bsp/tm4c/family.cmake index 833b6c5e4..e1cf94e96 100644 --- a/hw/bsp/tm4c/family.cmake +++ b/hw/bsp/tm4c/family.cmake @@ -80,14 +80,13 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_TM4C123) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/mentor/musb/dcd_musb.c ${TOP}/src/portable/mentor/musb/hcd_musb.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) diff --git a/hw/bsp/xmc4000/family.cmake b/hw/bsp/xmc4000/family.cmake index be72d349f..6edd72caf 100644 --- a/hw/bsp/xmc4000/family.cmake +++ b/hw/bsp/xmc4000/family.cmake @@ -84,15 +84,14 @@ function(family_configure_example TARGET RTOS) # Add TinyUSB target and port source family_add_tinyusb(${TARGET} OPT_MCU_XMC4000) - target_sources(${TARGET}-tinyusb PUBLIC + target_sources(${TARGET} PUBLIC ${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c ${TOP}/src/portable/synopsys/dwc2/hcd_dwc2.c ${TOP}/src/portable/synopsys/dwc2/dwc2_common.c ) - target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + - # Link dependencies - target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) # Flashing family_add_bin_hex(${TARGET}) -- cgit v1.3.1 From 7282572a56c774c1f523474c29965b321f6cc6c1 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 6 Feb 2025 17:11:13 +0700 Subject: skip iar build for forked PR --- .github/workflows/build.yml | 1 + .github/workflows/hil_test.yml | 3 ++- 2 files changed, 3 insertions(+), 1 deletion(-) (limited to '.github') diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml index 355b6b5c4..4c54efeaf 100644 --- a/.github/workflows/build.yml +++ b/.github/workflows/build.yml @@ -111,6 +111,7 @@ jobs: # --------------------------------------- # Build IAR on HFP self-hosted + # Since IAR Token secret is not passed to forked PR, only build on PR from the same repo # --------------------------------------- arm-iar: if: github.repository_owner == 'hathach' && github.event_name == 'push' diff --git a/.github/workflows/hil_test.yml b/.github/workflows/hil_test.yml index 3f32bdb5d..6e9ba924b 100644 --- a/.github/workflows/hil_test.yml +++ b/.github/workflows/hil_test.yml @@ -90,9 +90,10 @@ jobs: # --------------------------------------- # Hardware in the loop (HIL) # self-hosted by HFP, build with IAR toolchain, for attached hardware checkout test/hil/hfp.json + # Since IAR Token secret is not passed to forked PR, only build on PR from the same repo # --------------------------------------- hil-hfp: - if: github.repository_owner == 'hathach' + if: github.repository_owner == 'hathach' && github.event.pull_request.head.repo.fork == false runs-on: [self-hosted, Linux, X64, hifiphile] env: IAR_LMS_BEARER_TOKEN: ${{ secrets.IAR_LMS_BEARER_TOKEN }} -- cgit v1.3.1 From f23bef5fd872b9f1fa273c2c03c3288dac4777e5 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 11 Feb 2025 18:36:05 +0700 Subject: update IAR LMS CLOUD --- .circleci/config2.yml | 1 + .github/workflows/build.yml | 5 ++++- .github/workflows/hil_test.yml | 5 ++++- 3 files changed, 9 insertions(+), 2 deletions(-) (limited to '.github') diff --git a/.circleci/config2.yml b/.circleci/config2.yml index d33307445..3b0294168 100644 --- a/.circleci/config2.yml +++ b/.circleci/config2.yml @@ -121,6 +121,7 @@ commands: TOOLCHAIN_OPTION="--toolchain clang" elif [ << parameters.toolchain >> == arm-iar ]; then TOOLCHAIN_OPTION="--toolchain iar" + echo IAR_LMS_CLOUD_URL=$IAR_LMS_CLOUD_URL iccarm --version elif [ << parameters.toolchain >> == arm-gcc ]; then TOOLCHAIN_OPTION="--toolchain gcc" diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml index 4c54efeaf..547763bd8 100644 --- a/.github/workflows/build.yml +++ b/.github/workflows/build.yml @@ -119,6 +119,7 @@ jobs: runs-on: [self-hosted, Linux, X64, hifiphile] env: BUILD_ARGS: ${{ join(fromJSON(needs.set-matrix.outputs.json)['arm-iar'], ' ') }} + IAR_LMS_CLOUD_URL: ${{ vars.IAR_LMS_CLOUD_URL }} IAR_LMS_BEARER_TOKEN: ${{ secrets.IAR_LMS_BEARER_TOKEN }} steps: - name: Clean workspace @@ -128,7 +129,9 @@ jobs: mkdir -p "${{ github.workspace }}" - name: Toolchain version - run: iccarm --version + run: | + echo IAR_LMS_CLOUD_URL=$IAR_LMS_CLOUD_URL + iccarm --version - name: Checkout TinyUSB uses: actions/checkout@v4 diff --git a/.github/workflows/hil_test.yml b/.github/workflows/hil_test.yml index 6e9ba924b..c890933ec 100644 --- a/.github/workflows/hil_test.yml +++ b/.github/workflows/hil_test.yml @@ -96,6 +96,7 @@ jobs: if: github.repository_owner == 'hathach' && github.event.pull_request.head.repo.fork == false runs-on: [self-hosted, Linux, X64, hifiphile] env: + IAR_LMS_CLOUD_URL: ${{ vars.IAR_LMS_CLOUD_URL }} IAR_LMS_BEARER_TOKEN: ${{ secrets.IAR_LMS_BEARER_TOKEN }} steps: - name: Clean workspace @@ -105,7 +106,9 @@ jobs: mkdir -p "${{ github.workspace }}" - name: Toolchain version - run: iccarm --version + run: | + echo IAR_LMS_CLOUD_URL=$IAR_LMS_CLOUD_URL + iccarm --version - name: Checkout TinyUSB uses: actions/checkout@v4 -- cgit v1.3.1 From ccb34dbbdb24638ab030e1966b956330c15a1b88 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 17 Apr 2025 11:58:05 +0700 Subject: add toolchain.json for toolchain url --- .circleci/config2.yml | 12 +----------- .github/actions/setup_toolchain/action.yml | 9 +-------- .github/actions/setup_toolchain/toolchain.json | 9 +++++++++ 3 files changed, 11 insertions(+), 19 deletions(-) create mode 100644 .github/actions/setup_toolchain/toolchain.json (limited to '.github') diff --git a/.circleci/config2.yml b/.circleci/config2.yml index 3b0294168..c1f080556 100644 --- a/.circleci/config2.yml +++ b/.circleci/config2.yml @@ -10,17 +10,7 @@ commands: - run: name: Set toolchain url and key command: | - TOOLCHAIN_JSON='{ - "aarch64-gcc": "https://developer.arm.com/-/media/Files/downloads/gnu-a/10.3-2021.07/binrel/gcc-arm-10.3-2021.07-x86_64-aarch64-none-elf.tar.xz", - "arm-clang": "https://github.com/ARM-software/LLVM-embedded-toolchain-for-Arm/releases/download/release-19.1.1/LLVM-ET-Arm-19.1.1-Linux-x86_64.tar.xz", - "arm-gcc": "https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v13.2.1-1.1/xpack-arm-none-eabi-gcc-13.2.1-1.1-linux-x64.tar.gz", - "msp430-gcc": "http://software-dl.ti.com/msp430/msp430_public_sw/mcu/msp430/MSPGCC/9_2_0_0/export/msp430-gcc-9.2.0.50_linux64.tar.bz2", - "riscv-gcc": "https://github.com/xpack-dev-tools/riscv-none-elf-gcc-xpack/releases/download/v13.2.0-2/xpack-riscv-none-elf-gcc-13.2.0-2-linux-x64.tar.gz", - "rx-gcc": "https://github.com/hathach/rx_device/releases/download/0.0.1/gcc-8.3.0.202411-GNURX-ELF.run", - "arm-iar": "https://updates.iar.com/FileStore/STANDARD/001/003/322/cxarm-9.60.3.deb" - }' - toolchain_url=$(echo $TOOLCHAIN_JSON | jq -r '.["<< parameters.toolchain >>"]') - + toolchain_url=$(jq -r '."<< parameters.toolchain >>"' .github/actions/setup_toolchain/toolchain.json) # only cache if not a github link if [[ $toolchain_url != "https://github.com"* ]]; then echo "<< parameters.toolchain >>-$toolchain_url" > toolchain_key diff --git a/.github/actions/setup_toolchain/action.yml b/.github/actions/setup_toolchain/action.yml index 8305daa24..7c1f92c1a 100644 --- a/.github/actions/setup_toolchain/action.yml +++ b/.github/actions/setup_toolchain/action.yml @@ -32,14 +32,7 @@ runs: inputs.toolchain != 'esp-idf' id: set-toolchain-url run: | - TOOLCHAIN_JSON='{ - "aarch64-gcc": "https://developer.arm.com/-/media/Files/downloads/gnu-a/10.3-2021.07/binrel/gcc-arm-10.3-2021.07-x86_64-aarch64-none-elf.tar.xz", - "arm-clang": "https://github.com/ARM-software/LLVM-embedded-toolchain-for-Arm/releases/download/release-19.1.1/LLVM-ET-Arm-19.1.1-Linux-x86_64.tar.xz", - "msp430-gcc": "http://software-dl.ti.com/msp430/msp430_public_sw/mcu/msp430/MSPGCC/9_2_0_0/export/msp430-gcc-9.2.0.50_linux64.tar.bz2", - "riscv-gcc": "https://github.com/xpack-dev-tools/riscv-none-elf-gcc-xpack/releases/download/v13.2.0-2/xpack-riscv-none-elf-gcc-13.2.0-2-linux-x64.tar.gz", - "rx-gcc": "https://github.com/hathach/rx_device/releases/download/0.0.1/gcc-8.3.0.202411-GNURX-ELF.run" - }' - TOOLCHAIN_URL=$(echo $TOOLCHAIN_JSON | jq -r '.["${{ inputs.toolchain }}"]') + TOOLCHAIN_URL=$(jq -r '."${{ inputs.toolchain }}"' .github/actions/setup_toolchain/toolchain.json) echo "toolchain_url=$TOOLCHAIN_URL" echo "toolchain_url=$TOOLCHAIN_URL" >> $GITHUB_OUTPUT shell: bash diff --git a/.github/actions/setup_toolchain/toolchain.json b/.github/actions/setup_toolchain/toolchain.json new file mode 100644 index 000000000..4e65f1cbe --- /dev/null +++ b/.github/actions/setup_toolchain/toolchain.json @@ -0,0 +1,9 @@ +{ + "aarch64-gcc": "https://developer.arm.com/-/media/Files/downloads/gnu-a/10.3-2021.07/binrel/gcc-arm-10.3-2021.07-x86_64-aarch64-none-elf.tar.xz", + "arm-clang": "https://github.com/ARM-software/LLVM-embedded-toolchain-for-Arm/releases/download/release-19.1.1/LLVM-ET-Arm-19.1.1-Linux-x86_64.tar.xz", + "arm-gcc": "https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v13.2.1-1.1/xpack-arm-none-eabi-gcc-13.2.1-1.1-linux-x64.tar.gz", + "msp430-gcc": "http://software-dl.ti.com/msp430/msp430_public_sw/mcu/msp430/MSPGCC/9_2_0_0/export/msp430-gcc-9.2.0.50_linux64.tar.bz2", + "riscv-gcc": "https://github.com/xpack-dev-tools/riscv-none-elf-gcc-xpack/releases/download/v13.2.0-2/xpack-riscv-none-elf-gcc-13.2.0-2-linux-x64.tar.gz", + "rx-gcc": "https://github.com/hathach/rx_device/releases/download/0.0.1/gcc-8.3.0.202411-GNURX-ELF.run", + "arm-iar": "https://netstorage.iar.com/FileStore/STANDARD/001/003/583/cxarm-9.60.4.deb" +} -- cgit v1.3.1 From eea42fd1197bea01eb480363ccf573544f4c9551 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 17 Apr 2025 13:05:18 +0700 Subject: update iar build --- .circleci/config.yml | 4 ++-- .circleci/config2.yml | 1 - .github/workflows/build.yml | 2 -- .github/workflows/hil_test.yml | 2 -- 4 files changed, 2 insertions(+), 7 deletions(-) (limited to '.github') diff --git a/.circleci/config.yml b/.circleci/config.yml index fd5631e2e..a7ae6980f 100644 --- a/.circleci/config.yml +++ b/.circleci/config.yml @@ -20,17 +20,17 @@ jobs: BUILDSYSTEM_TOOLCHAIN=( "cmake arm-clang" + "cmake esp-idf" "make aarch64-gcc" "make arm-gcc" "make msp430-gcc" "make riscv-gcc" "make rx-gcc" - "cmake esp-idf" ) # only build IAR if not forked PR, since IAR token is not shared if [ -z $CIRCLE_PR_USERNAME ]; then - BUILDSYSTEM_TOOLCHAIN+=("cmake arm-iar") + BUILDSYSTEM_TOOLCHAIN+=("make arm-iar") fi RESOURCE_LARGE='["nrf", "imxrt", "stm32f4", "stm32h7"]' diff --git a/.circleci/config2.yml b/.circleci/config2.yml index c1f080556..d86a3f662 100644 --- a/.circleci/config2.yml +++ b/.circleci/config2.yml @@ -111,7 +111,6 @@ commands: TOOLCHAIN_OPTION="--toolchain clang" elif [ << parameters.toolchain >> == arm-iar ]; then TOOLCHAIN_OPTION="--toolchain iar" - echo IAR_LMS_CLOUD_URL=$IAR_LMS_CLOUD_URL iccarm --version elif [ << parameters.toolchain >> == arm-gcc ]; then TOOLCHAIN_OPTION="--toolchain gcc" diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml index 547763bd8..f42499ef7 100644 --- a/.github/workflows/build.yml +++ b/.github/workflows/build.yml @@ -119,7 +119,6 @@ jobs: runs-on: [self-hosted, Linux, X64, hifiphile] env: BUILD_ARGS: ${{ join(fromJSON(needs.set-matrix.outputs.json)['arm-iar'], ' ') }} - IAR_LMS_CLOUD_URL: ${{ vars.IAR_LMS_CLOUD_URL }} IAR_LMS_BEARER_TOKEN: ${{ secrets.IAR_LMS_BEARER_TOKEN }} steps: - name: Clean workspace @@ -130,7 +129,6 @@ jobs: - name: Toolchain version run: | - echo IAR_LMS_CLOUD_URL=$IAR_LMS_CLOUD_URL iccarm --version - name: Checkout TinyUSB diff --git a/.github/workflows/hil_test.yml b/.github/workflows/hil_test.yml index c890933ec..257416213 100644 --- a/.github/workflows/hil_test.yml +++ b/.github/workflows/hil_test.yml @@ -96,7 +96,6 @@ jobs: if: github.repository_owner == 'hathach' && github.event.pull_request.head.repo.fork == false runs-on: [self-hosted, Linux, X64, hifiphile] env: - IAR_LMS_CLOUD_URL: ${{ vars.IAR_LMS_CLOUD_URL }} IAR_LMS_BEARER_TOKEN: ${{ secrets.IAR_LMS_BEARER_TOKEN }} steps: - name: Clean workspace @@ -107,7 +106,6 @@ jobs: - name: Toolchain version run: | - echo IAR_LMS_CLOUD_URL=$IAR_LMS_CLOUD_URL iccarm --version - name: Checkout TinyUSB -- cgit v1.3.1 From 3851c7c97a2a743b63d879ab622dd267b4195f08 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 17 Apr 2025 16:07:10 +0700 Subject: - run arm-iar using github action - add skip_ci.txt to family folder to skip boards in ci run --- .github/workflows/build.yml | 62 ++++++++++++++++++----------- .github/workflows/build_util.yml | 2 + hw/bsp/rp2040/skip_ci.txt | 7 ++++ hw/bsp/stm32h7/boards/stm32h743eval/board.h | 10 ++--- hw/bsp/stm32h7/family.c | 4 +- tools/build.py | 7 +++- 6 files changed, 61 insertions(+), 31 deletions(-) create mode 100644 hw/bsp/rp2040/skip_ci.txt (limited to '.github') diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml index f42499ef7..6419efbe8 100644 --- a/.github/workflows/build.yml +++ b/.github/workflows/build.yml @@ -110,35 +110,51 @@ jobs: one-per-family: true # --------------------------------------- - # Build IAR on HFP self-hosted + # Build IAR # Since IAR Token secret is not passed to forked PR, only build on PR from the same repo # --------------------------------------- arm-iar: if: github.repository_owner == 'hathach' && github.event_name == 'push' needs: set-matrix - runs-on: [self-hosted, Linux, X64, hifiphile] - env: - BUILD_ARGS: ${{ join(fromJSON(needs.set-matrix.outputs.json)['arm-iar'], ' ') }} - IAR_LMS_BEARER_TOKEN: ${{ secrets.IAR_LMS_BEARER_TOKEN }} - steps: - - name: Clean workspace - run: | - echo "Cleaning up previous run" - rm -rf "${{ github.workspace }}" - mkdir -p "${{ github.workspace }}" - - - name: Toolchain version - run: | - iccarm --version - - - name: Checkout TinyUSB - uses: actions/checkout@v4 - - - name: Get Dependencies - run: python3 tools/get_deps.py $BUILD_ARGS + uses: ./.github/workflows/build_util.yml + secrets: inherit + strategy: + fail-fast: false + matrix: + build-system: + - 'cmake' + with: + build-system: ${{ matrix.build-system }} + toolchain: 'arm-iar' + build-args: ${{ toJSON(fromJSON(needs.set-matrix.outputs.json)['arm-iar']) }} + one-per-family: ${{ github.event_name == 'push' }} - - name: Build - run: python3 tools/build.py --one-per-family --toolchain iar $BUILD_ARGS +# arm-iar: +# if: github.repository_owner == 'hathach' && github.event_name == 'push' +# needs: set-matrix +# runs-on: [self-hosted, Linux, X64, hifiphile] +# env: +# BUILD_ARGS: ${{ join(fromJSON(needs.set-matrix.outputs.json)['arm-iar'], ' ') }} +# IAR_LMS_BEARER_TOKEN: ${{ secrets.IAR_LMS_BEARER_TOKEN }} +# steps: +# - name: Clean workspace +# run: | +# echo "Cleaning up previous run" +# rm -rf "${{ github.workspace }}" +# mkdir -p "${{ github.workspace }}" +# +# - name: Toolchain version +# run: | +# iccarm --version +# +# - name: Checkout TinyUSB +# uses: actions/checkout@v4 +# +# - name: Get Dependencies +# run: python3 tools/get_deps.py $BUILD_ARGS +# +# - name: Build +# run: python3 tools/build.py --one-per-family --toolchain iar $BUILD_ARGS # --------------------------------------- # Zephyr diff --git a/.github/workflows/build_util.yml b/.github/workflows/build_util.yml index 2de68c6f3..a2c96f3c0 100644 --- a/.github/workflows/build_util.yml +++ b/.github/workflows/build_util.yml @@ -58,6 +58,8 @@ jobs: shell: bash - name: Build + env: + IAR_LMS_BEARER_TOKEN: ${{ secrets.IAR_LMS_BEARER_TOKEN }} run: | if [ "${{ inputs.toolchain }}" == "esp-idf" ]; then docker run --rm -v $PWD:/project -w /project espressif/idf:tinyusb python tools/build.py ${{ matrix.arg }} diff --git a/hw/bsp/rp2040/skip_ci.txt b/hw/bsp/rp2040/skip_ci.txt new file mode 100644 index 000000000..fe99c9f65 --- /dev/null +++ b/hw/bsp/rp2040/skip_ci.txt @@ -0,0 +1,7 @@ +# boards in this files are skipped when running CI with this family +adafruit_feather_rp2040_usb_host +adafruit_fruit_jam +adafruit_metro_rp2350 +feather_rp2040_max3421 +pico_sdk +raspberry_pi_pico_w diff --git a/hw/bsp/stm32h7/boards/stm32h743eval/board.h b/hw/bsp/stm32h7/boards/stm32h743eval/board.h index 334876e51..cb6d772e6 100644 --- a/hw/bsp/stm32h7/boards/stm32h743eval/board.h +++ b/hw/bsp/stm32h7/boards/stm32h743eval/board.h @@ -184,7 +184,7 @@ static MFXSTM32L152_Object_t mfx_obj = { 0 }; static MFXSTM32L152_IO_Mode_t* mfx_io = NULL; static uint32_t mfx_vbus_pin[2] = { MFXSTM32L152_GPIO_PIN_7, MFXSTM32L152_GPIO_PIN_9 }; -int32_t board_i2c_init(void) { +static int32_t board_i2c_init(void) { __HAL_RCC_I2C1_CLK_ENABLE(); __HAL_RCC_I2C1_FORCE_RESET(); __HAL_RCC_I2C1_RELEASE_RESET(); @@ -200,16 +200,16 @@ int32_t board_i2c_init(void) { return 0; } -int32_t board_i2c_deinit(void) { +static int32_t board_i2c_deinit(void) { return 0; } -int32_t i2c_readreg(uint16_t DevAddr, uint16_t Reg, uint8_t *pData, uint16_t Length) { +static int32_t i2c_readreg(uint16_t DevAddr, uint16_t Reg, uint8_t *pData, uint16_t Length) { TU_ASSERT (HAL_OK == HAL_I2C_Mem_Read(&i2c_handle, DevAddr, Reg, I2C_MEMADD_SIZE_8BIT, pData, Length, 10000)); return 0; } -int32_t i2c_writereg(uint16_t DevAddr, uint16_t Reg, uint8_t *pData, uint16_t Length) { +static int32_t i2c_writereg(uint16_t DevAddr, uint16_t Reg, uint8_t *pData, uint16_t Length) { TU_ASSERT(HAL_OK == HAL_I2C_Mem_Write(&i2c_handle, DevAddr, Reg, I2C_MEMADD_SIZE_8BIT, pData, Length, 10000)); return 0; } @@ -249,7 +249,7 @@ static inline void board_init2(void) { } // VBUS1 is actually controlled by USB3320C PHY (using dwc2 drivebus signal) -void board_vbus_set(uint8_t rhport, bool state) { +static void board_vbus_set(uint8_t rhport, bool state) { if (mfx_io) { mfx_io->IO_WritePin(&mfx_obj, mfx_vbus_pin[rhport], state); } diff --git a/hw/bsp/stm32h7/family.c b/hw/bsp/stm32h7/family.c index e5228b29b..f8723b0c7 100644 --- a/hw/bsp/stm32h7/family.c +++ b/hw/bsp/stm32h7/family.c @@ -80,7 +80,7 @@ void OTG_HS_IRQHandler(void) { } #ifdef TRACE_ETM -void trace_etm_init(void) { +static void trace_etm_init(void) { // H7 trace pin is PE2 to PE6 GPIO_InitTypeDef gpio_init; gpio_init.Pin = GPIO_PIN_2 | GPIO_PIN_3 | GPIO_PIN_4 | GPIO_PIN_5 | GPIO_PIN_6; @@ -94,7 +94,7 @@ void trace_etm_init(void) { DBGMCU->CR |= DBGMCU_CR_DBG_TRACECKEN | DBGMCU_CR_DBG_CKD1EN | DBGMCU_CR_DBG_CKD3EN; } #else - #define trace_etm_init() +#define trace_etm_init() #endif void board_init(void) { diff --git a/tools/build.py b/tools/build.py index 633d2b582..d28ddd929 100755 --- a/tools/build.py +++ b/tools/build.py @@ -182,9 +182,14 @@ def build_boards_list(boards, toolchain, build_system, build_flags_on): def build_family(family, toolchain, build_system, build_flags_on, one_per_family, boards): + skip_ci = ['pico_sdk'] + if os.getenv('GITHUB_ACTIONS') or os.getenv('CIRCLECI'): + skip_ci_file = Path(f"hw/bsp/{family}/skip_ci.txt") + if skip_ci_file.exists(): + skip_ci = skip_ci_file.read_text().split() all_boards = [] for entry in os.scandir(f"hw/bsp/{family}/boards"): - if entry.is_dir() and entry.name != 'pico_sdk': + if entry.is_dir() and not entry.name in skip_ci: all_boards.append(entry.name) all_boards.sort() -- cgit v1.3.1 From d4983acd3a207d9d81c2698e5f5d2ace9b88e016 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 17 Apr 2025 16:41:22 +0700 Subject: github ci support setup/install iar toolchain --- .github/actions/setup_toolchain/action.yml | 2 -- .github/actions/setup_toolchain/download/action.yml | 16 ++++++++++++---- 2 files changed, 12 insertions(+), 6 deletions(-) (limited to '.github') diff --git a/.github/actions/setup_toolchain/action.yml b/.github/actions/setup_toolchain/action.yml index 7c1f92c1a..850a3a06f 100644 --- a/.github/actions/setup_toolchain/action.yml +++ b/.github/actions/setup_toolchain/action.yml @@ -28,7 +28,6 @@ runs: - name: Get Toolchain URL if: >- inputs.toolchain != 'arm-gcc' && - inputs.toolchain != 'arm-iar' && inputs.toolchain != 'esp-idf' id: set-toolchain-url run: | @@ -40,7 +39,6 @@ runs: - name: Download Toolchain if: >- inputs.toolchain != 'arm-gcc' && - inputs.toolchain != 'arm-iar' && inputs.toolchain != 'esp-idf' uses: ./.github/actions/setup_toolchain/download with: diff --git a/.github/actions/setup_toolchain/download/action.yml b/.github/actions/setup_toolchain/download/action.yml index 813197208..ce9643010 100644 --- a/.github/actions/setup_toolchain/download/action.yml +++ b/.github/actions/setup_toolchain/download/action.yml @@ -23,17 +23,25 @@ runs: if: steps.cache-toolchain-download.outputs.cache-hit != 'true' run: | mkdir -p ~/cache/${{ inputs.toolchain }} - wget --progress=dot:giga ${{ inputs.toolchain_url }} -O toolchain.tar.gz + if [[ ${{ inputs.toolchain }} == rx-gcc ]]; then - mv toolchain.tar.gz toolchain.run + wget --progress=dot:giga ${{ inputs.toolchain_url }} -O toolchain.run chmod +x toolchain.run ./toolchain.run -p ~/cache/${{ inputs.toolchain }}/gnurx -y + elif [[ ${{ inputs.toolchain }} == arm-iar ]]; then + wget --progress=dot:giga ${{ inputs.toolchain_url }} -O ~/cache/${{ inputs.toolchain }}/cxarm.deb else + wget --progress=dot:giga ${{ inputs.toolchain_url }} -O toolchain.tar.gz tar -C ~/cache/${{ inputs.toolchain }} -xaf toolchain.tar.gz fi shell: bash - - name: Set Toolchain Path + - name: Setup Toolchain run: | - echo >> $GITHUB_PATH `echo ~/cache/${{ inputs.toolchain }}/*/bin` + if [[ ${{ inputs.toolchain }} == arm-iar ]]; then + sudo apt-get install -y ~/cache/${{ inputs.toolchain }}/cxarm.deb + echo >> $GITHUB_PATH "/opt/iar/cxarm/arm/bin" + else + echo >> $GITHUB_PATH `echo ~/cache/${{ inputs.toolchain }}/*/bin` + fi shell: bash -- cgit v1.3.1 From 46d2d4199ea31babbffff51f9eaa65eda81c659b Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 17 Apr 2025 17:26:36 +0700 Subject: run arm-iar with non-forked PR --- .circleci/config.yml | 2 +- .github/workflows/build.yml | 36 +++++------------------------------- .github/workflows/hil_test.yml | 2 +- 3 files changed, 7 insertions(+), 33 deletions(-) (limited to '.github') diff --git a/.circleci/config.yml b/.circleci/config.yml index a7ae6980f..0b11b50e4 100644 --- a/.circleci/config.yml +++ b/.circleci/config.yml @@ -30,7 +30,7 @@ jobs: # only build IAR if not forked PR, since IAR token is not shared if [ -z $CIRCLE_PR_USERNAME ]; then - BUILDSYSTEM_TOOLCHAIN+=("make arm-iar") + BUILDSYSTEM_TOOLCHAIN+=("cmake arm-iar") fi RESOURCE_LARGE='["nrf", "imxrt", "stm32f4", "stm32h7"]' diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml index 6419efbe8..7fb13af74 100644 --- a/.github/workflows/build.yml +++ b/.github/workflows/build.yml @@ -111,10 +111,11 @@ jobs: # --------------------------------------- # Build IAR - # Since IAR Token secret is not passed to forked PR, only build on PR from the same repo + # Since IAR Token secret is not passed to forked PR, only build non-forked PR with make. + # cmake is built by circle-ci. Due to IAR limit capacity, only build oe per family # --------------------------------------- arm-iar: - if: github.repository_owner == 'hathach' && github.event_name == 'push' + if: github.event_name == 'pull_request' && github.event.pull_request.head.repo.fork == false needs: set-matrix uses: ./.github/workflows/build_util.yml secrets: inherit @@ -122,39 +123,12 @@ jobs: fail-fast: false matrix: build-system: - - 'cmake' + - 'make' with: build-system: ${{ matrix.build-system }} toolchain: 'arm-iar' build-args: ${{ toJSON(fromJSON(needs.set-matrix.outputs.json)['arm-iar']) }} - one-per-family: ${{ github.event_name == 'push' }} - -# arm-iar: -# if: github.repository_owner == 'hathach' && github.event_name == 'push' -# needs: set-matrix -# runs-on: [self-hosted, Linux, X64, hifiphile] -# env: -# BUILD_ARGS: ${{ join(fromJSON(needs.set-matrix.outputs.json)['arm-iar'], ' ') }} -# IAR_LMS_BEARER_TOKEN: ${{ secrets.IAR_LMS_BEARER_TOKEN }} -# steps: -# - name: Clean workspace -# run: | -# echo "Cleaning up previous run" -# rm -rf "${{ github.workspace }}" -# mkdir -p "${{ github.workspace }}" -# -# - name: Toolchain version -# run: | -# iccarm --version -# -# - name: Checkout TinyUSB -# uses: actions/checkout@v4 -# -# - name: Get Dependencies -# run: python3 tools/get_deps.py $BUILD_ARGS -# -# - name: Build -# run: python3 tools/build.py --one-per-family --toolchain iar $BUILD_ARGS + one-per-family: true # --------------------------------------- # Zephyr diff --git a/.github/workflows/hil_test.yml b/.github/workflows/hil_test.yml index 257416213..0ad37ffce 100644 --- a/.github/workflows/hil_test.yml +++ b/.github/workflows/hil_test.yml @@ -90,7 +90,7 @@ jobs: # --------------------------------------- # Hardware in the loop (HIL) # self-hosted by HFP, build with IAR toolchain, for attached hardware checkout test/hil/hfp.json - # Since IAR Token secret is not passed to forked PR, only build on PR from the same repo + # Since IAR Token secret is not passed to forked PR, only build non-forked PR # --------------------------------------- hil-hfp: if: github.repository_owner == 'hathach' && github.event.pull_request.head.repo.fork == false -- cgit v1.3.1 From 5c7ca2acad12c72112437b51fcdd9d5adf5fe985 Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 18 Apr 2025 12:07:08 +0700 Subject: change gh ci iar to push event --- .github/workflows/build.yml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to '.github') diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml index 7fb13af74..a0e4725ce 100644 --- a/.github/workflows/build.yml +++ b/.github/workflows/build.yml @@ -115,7 +115,7 @@ jobs: # cmake is built by circle-ci. Due to IAR limit capacity, only build oe per family # --------------------------------------- arm-iar: - if: github.event_name == 'pull_request' && github.event.pull_request.head.repo.fork == false + if: github.event_name == 'push' && github.repository_owner == 'hathach' needs: set-matrix uses: ./.github/workflows/build_util.yml secrets: inherit -- cgit v1.3.1 From ba45625ea4fe57625059b90e5d2c0f4602818737 Mon Sep 17 00:00:00 2001 From: hathach Date: Fri, 18 Apr 2025 12:39:49 +0700 Subject: minor ci update --- .github/workflows/build.yml | 5 +++-- .github/workflows/ci_set_matrix.py | 7 ++++--- hw/bsp/espressif/boards/espressif_s2_devkitc/board.h | 10 ++++++++-- 3 files changed, 15 insertions(+), 7 deletions(-) (limited to '.github') diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml index a0e4725ce..17d578e4d 100644 --- a/.github/workflows/build.yml +++ b/.github/workflows/build.yml @@ -85,7 +85,7 @@ jobs: - 'msp430-gcc' - 'riscv-gcc' - 'rx-gcc' - - 'esp-idf' # build-system is ignored + - 'esp-idf' with: build-system: 'make' toolchain: ${{ matrix.toolchain }} @@ -115,7 +115,8 @@ jobs: # cmake is built by circle-ci. Due to IAR limit capacity, only build oe per family # --------------------------------------- arm-iar: - if: github.event_name == 'push' && github.repository_owner == 'hathach' + if: false # disable for now since we got reach capacity limit too often + #if: github.event_name == 'push' && github.repository_owner == 'hathach' needs: set-matrix uses: ./.github/workflows/build_util.yml secrets: inherit diff --git a/.github/workflows/ci_set_matrix.py b/.github/workflows/ci_set_matrix.py index 410508246..fa73dc1b6 100755 --- a/.github/workflows/ci_set_matrix.py +++ b/.github/workflows/ci_set_matrix.py @@ -44,9 +44,10 @@ family_list = { "stm32l0 stm32l4": ["arm-gcc", "arm-clang", "arm-iar"], "stm32u5 stm32wb": ["arm-gcc", "arm-clang", "arm-iar"], "xmc4000": ["arm-gcc"], - "-bespressif_kaluga_1": ["esp-idf"], - "-bespressif_s3_devkitm": ["esp-idf"], - "-bespressif_p4_function_ev": ["esp-idf"], + "-bespressif_s2_devkitc": ["esp-idf"], + # S3, P4 will be built by hil test + # "-bespressif_s3_devkitm": ["esp-idf"], + # "-bespressif_p4_function_ev": ["esp-idf"], } diff --git a/hw/bsp/espressif/boards/espressif_s2_devkitc/board.h b/hw/bsp/espressif/boards/espressif_s2_devkitc/board.h index 9c197591f..499a626a6 100644 --- a/hw/bsp/espressif/boards/espressif_s2_devkitc/board.h +++ b/hw/bsp/espressif/boards/espressif_s2_devkitc/board.h @@ -36,13 +36,19 @@ extern "C" { #endif -// Note: On the production version (v1.2) WS2812 is connected to GPIO 18, -// however earlier revision v1.1 WS2812 is connected to GPIO 17 #define NEOPIXEL_PIN 18 #define BUTTON_PIN 0 #define BUTTON_STATE_ACTIVE 0 +// SPI for USB host shield +#define MAX3421_SPI_HOST SPI2_HOST +#define MAX3421_SCK_PIN 36 +#define MAX3421_MOSI_PIN 35 +#define MAX3421_MISO_PIN 37 +#define MAX3421_CS_PIN 15 +#define MAX3421_INTR_PIN 14 + #ifdef __cplusplus } #endif -- cgit v1.3.1 From fb2214dea63daa8d9f44ac2a6df5835d8eabba80 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 6 May 2025 16:30:34 +0700 Subject: move hil into build workflow --- .github/workflows/build.yml | 132 ++++++++++++++++++++++++++++++++++++++++- .github/workflows/hil_test.yml | 128 --------------------------------------- 2 files changed, 130 insertions(+), 130 deletions(-) delete mode 100644 .github/workflows/hil_test.yml (limited to '.github') diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml index 17d578e4d..3406fb3c2 100644 --- a/.github/workflows/build.yml +++ b/.github/workflows/build.yml @@ -8,8 +8,8 @@ on: - 'examples/**' - 'lib/**' - 'hw/**' - - 'tools/get_deps.py' - 'tools/build.py' + - 'tools/get_deps.py' - '.github/actions/**' - '.github/workflows/build.yml' - '.github/workflows/build_util.yml' @@ -21,8 +21,9 @@ on: - 'examples/**' - 'lib/**' - 'hw/**' - - 'tools/get_deps.py' + - 'test/hil/**' - 'tools/build.py' + - 'tools/get_deps.py' - '.github/actions/**' - '.github/workflows/build.yml' - '.github/workflows/build_util.yml' @@ -31,7 +32,15 @@ concurrency: group: ${{ github.workflow }}-${{ github.ref }} cancel-in-progress: true +env: + HIL_JSON: test/hil/tinyusb.json + jobs: + # --------------------------------------- + # + # Build + # + # --------------------------------------- set-matrix: runs-on: ubuntu-latest outputs: @@ -151,3 +160,122 @@ jobs: run: | west build -b pca10056 -d examples/device/cdc_msc/build examples/device/cdc_msc -- -DRTOS=zephyr west build -b pca10056 -d examples/device/msc_dual_lun/build examples/device/msc_dual_lun -- -DRTOS=zephyr + + # --------------------------------------- + # + # Hardware in the loop (HIL) + # Run on PR only (hil-tinyusb), hil-hfp only run on non-forked PR + # --------------------------------------- + hil-set-matrix: + runs-on: ubuntu-latest + if: github.event_name == 'pull_request' || github.event_name == 'workflow_dispatch' + outputs: + json: ${{ steps.set-matrix-json.outputs.matrix }} + steps: + - name: Checkout TinyUSB + uses: actions/checkout@v4 + + - name: Generate matrix json + id: set-matrix-json + run: | + MATRIX_JSON=$(python test/hil/hil_ci_set_matrix.py ${{ env.HIL_JSON }}) + echo "matrix=$MATRIX_JSON" + echo "matrix=$MATRIX_JSON" >> $GITHUB_OUTPUT + + # --------------------------------------- + # Build arm-gcc + # --------------------------------------- + hil-build: + if: | + github.repository_owner == 'hathach' && + (github.event_name == 'pull_request' || github.event_name == 'workflow_dispatch') + needs: hil-set-matrix + uses: ./.github/workflows/build_util.yml + strategy: + fail-fast: false + matrix: + toolchain: + - 'arm-gcc' + - 'esp-idf' + with: + build-system: 'cmake' + toolchain: ${{ matrix.toolchain }} + build-args: ${{ toJSON(fromJSON(needs.hil-set-matrix.outputs.json)[matrix.toolchain]) }} + one-per-family: true + upload-artifacts: true + + # --------------------------------------- + # Hardware in the loop (HIL) + # self-hosted on local VM, for attached hardware checkout HIL_JSON + # --------------------------------------- + hil-tinyusb: + if: | + github.repository_owner == 'hathach' && + (github.event_name == 'pull_request' || github.event_name == 'workflow_dispatch') + needs: hil-build + runs-on: [self-hosted, X64, hathach, hardware-in-the-loop] + steps: + - name: Clean workspace + run: | + echo "Cleaning up previous run" + rm -rf "${{ github.workspace }}" + mkdir -p "${{ github.workspace }}" + + - name: Checkout TinyUSB + uses: actions/checkout@v4 + with: + sparse-checkout: test/hil + + - name: Download Artifacts + uses: actions/download-artifact@v4 + with: + path: cmake-build + merge-multiple: true + + - name: Test on actual hardware + run: | + ls cmake-build/ + python3 test/hil/hil_test.py ${{ env.HIL_JSON }} + + # --------------------------------------- + # Hardware in the loop (HIL) + # self-hosted by HFP, build with IAR toolchain, for attached hardware checkout test/hil/hfp.json + # Since IAR Token secret is not passed to forked PR, only build non-forked PR + # --------------------------------------- + hil-hfp: + if: | + github.repository_owner == 'hathach' && + github.event.pull_request.head.repo.fork == false && + (github.event_name == 'pull_request' || github.event_name == 'workflow_dispatch') + runs-on: [self-hosted, Linux, X64, hifiphile] + env: + IAR_LMS_BEARER_TOKEN: ${{ secrets.IAR_LMS_BEARER_TOKEN }} + steps: + - name: Clean workspace + run: | + echo "Cleaning up previous run" + rm -rf "${{ github.workspace }}" + mkdir -p "${{ github.workspace }}" + + - name: Toolchain version + run: | + iccarm --version + + - name: Checkout TinyUSB + uses: actions/checkout@v4 + + - name: Get build boards + run: | + MATRIX_JSON=$(python test/hil/hil_ci_set_matrix.py test/hil/hfp.json) + BUILD_ARGS=$(echo $MATRIX_JSON | jq -r '.["arm-gcc"] | join(" ")') + echo "BUILD_ARGS=$BUILD_ARGS" + echo "BUILD_ARGS=$BUILD_ARGS" >> $GITHUB_ENV + + - name: Get Dependencies + run: python3 tools/get_deps.py $BUILD_ARGS + + - name: Build + run: python3 tools/build.py --toolchain iar $BUILD_ARGS + + - name: Test on actual hardware (hardware in the loop) + run: python3 test/hil/hil_test.py hfp.json diff --git a/.github/workflows/hil_test.yml b/.github/workflows/hil_test.yml deleted file mode 100644 index 0ad37ffce..000000000 --- a/.github/workflows/hil_test.yml +++ /dev/null @@ -1,128 +0,0 @@ -name: Hardware Test - -on: - workflow_dispatch: - pull_request: - branches: [ master ] - paths: - - 'src/**' - - 'examples/**' - - 'lib/**' - - 'hw/**' - - 'test/hil/**' - - 'tools/get_deps.py' - - '.github/actions/**' - - '.github/workflows/hil_test.yml' -concurrency: - group: ${{ github.workflow }}-${{ github.ref }} - cancel-in-progress: true - -env: - HIL_JSON: test/hil/tinyusb.json - -jobs: - set-matrix: - runs-on: ubuntu-latest - outputs: - json: ${{ steps.set-matrix-json.outputs.matrix }} - steps: - - name: Checkout TinyUSB - uses: actions/checkout@v4 - - - name: Generate matrix json - id: set-matrix-json - run: | - MATRIX_JSON=$(python test/hil/hil_ci_set_matrix.py ${{ env.HIL_JSON }}) - echo "matrix=$MATRIX_JSON" - echo "matrix=$MATRIX_JSON" >> $GITHUB_OUTPUT - - # --------------------------------------- - # Build arm-gcc - # --------------------------------------- - build: - if: github.repository_owner == 'hathach' - needs: set-matrix - uses: ./.github/workflows/build_util.yml - strategy: - fail-fast: false - matrix: - toolchain: - - 'arm-gcc' - - 'esp-idf' - with: - build-system: 'cmake' - toolchain: ${{ matrix.toolchain }} - build-args: ${{ toJSON(fromJSON(needs.set-matrix.outputs.json)[matrix.toolchain]) }} - one-per-family: true - upload-artifacts: true - - # --------------------------------------- - # Hardware in the loop (HIL) - # self-hosted on local VM, for attached hardware checkout HIL_JSON - # --------------------------------------- - hil-tinyusb: - if: github.repository_owner == 'hathach' - needs: build - runs-on: [self-hosted, X64, hathach, hardware-in-the-loop] - steps: - - name: Clean workspace - run: | - echo "Cleaning up previous run" - rm -rf "${{ github.workspace }}" - mkdir -p "${{ github.workspace }}" - - - name: Checkout TinyUSB - uses: actions/checkout@v4 - with: - sparse-checkout: test/hil - - - name: Download Artifacts - uses: actions/download-artifact@v4 - with: - path: cmake-build - merge-multiple: true - - - name: Test on actual hardware - run: | - ls cmake-build/ - python3 test/hil/hil_test.py ${{ env.HIL_JSON }} - - # --------------------------------------- - # Hardware in the loop (HIL) - # self-hosted by HFP, build with IAR toolchain, for attached hardware checkout test/hil/hfp.json - # Since IAR Token secret is not passed to forked PR, only build non-forked PR - # --------------------------------------- - hil-hfp: - if: github.repository_owner == 'hathach' && github.event.pull_request.head.repo.fork == false - runs-on: [self-hosted, Linux, X64, hifiphile] - env: - IAR_LMS_BEARER_TOKEN: ${{ secrets.IAR_LMS_BEARER_TOKEN }} - steps: - - name: Clean workspace - run: | - echo "Cleaning up previous run" - rm -rf "${{ github.workspace }}" - mkdir -p "${{ github.workspace }}" - - - name: Toolchain version - run: | - iccarm --version - - - name: Checkout TinyUSB - uses: actions/checkout@v4 - - - name: Get build boards - run: | - MATRIX_JSON=$(python test/hil/hil_ci_set_matrix.py test/hil/hfp.json) - BUILD_ARGS=$(echo $MATRIX_JSON | jq -r '.["arm-gcc"] | join(" ")') - echo "BUILD_ARGS=$BUILD_ARGS" - echo "BUILD_ARGS=$BUILD_ARGS" >> $GITHUB_ENV - - - name: Get Dependencies - run: python3 tools/get_deps.py $BUILD_ARGS - - - name: Build - run: python3 tools/build.py --toolchain iar $BUILD_ARGS - - - name: Test on actual hardware (hardware in the loop) - run: python3 test/hil/hil_test.py hfp.json -- cgit v1.3.1 From a05fc504615edb6db2519baf97382902a9e0a60c Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 6 May 2025 18:01:30 +0700 Subject: clean up ci --- .github/workflows/build.yml | 27 +++++++++------------------ 1 file changed, 9 insertions(+), 18 deletions(-) (limited to '.github') diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml index 3406fb3c2..28447cc80 100644 --- a/.github/workflows/build.yml +++ b/.github/workflows/build.yml @@ -45,6 +45,7 @@ jobs: runs-on: ubuntu-latest outputs: json: ${{ steps.set-matrix-json.outputs.matrix }} + hil_json: ${{ steps.set-matrix-json.outputs.hil_matrix }} steps: - name: Checkout TinyUSB uses: actions/checkout@v4 @@ -52,9 +53,14 @@ jobs: - name: Generate matrix json id: set-matrix-json run: | + # build matrix MATRIX_JSON=$(python .github/workflows/ci_set_matrix.py) echo "matrix=$MATRIX_JSON" echo "matrix=$MATRIX_JSON" >> $GITHUB_OUTPUT + # hil matrix + HIL_MATRIX_JSON=$(python test/hil/hil_ci_set_matrix.py ${{ env.HIL_JSON }}) + echo "hil_matrix=$HIL_MATRIX_JSON" + echo "hil_matrix=$HIL_MATRIX_JSON" >> $GITHUB_OUTPUT # --------------------------------------- # Build CMake @@ -166,21 +172,6 @@ jobs: # Hardware in the loop (HIL) # Run on PR only (hil-tinyusb), hil-hfp only run on non-forked PR # --------------------------------------- - hil-set-matrix: - runs-on: ubuntu-latest - if: github.event_name == 'pull_request' || github.event_name == 'workflow_dispatch' - outputs: - json: ${{ steps.set-matrix-json.outputs.matrix }} - steps: - - name: Checkout TinyUSB - uses: actions/checkout@v4 - - - name: Generate matrix json - id: set-matrix-json - run: | - MATRIX_JSON=$(python test/hil/hil_ci_set_matrix.py ${{ env.HIL_JSON }}) - echo "matrix=$MATRIX_JSON" - echo "matrix=$MATRIX_JSON" >> $GITHUB_OUTPUT # --------------------------------------- # Build arm-gcc @@ -189,7 +180,7 @@ jobs: if: | github.repository_owner == 'hathach' && (github.event_name == 'pull_request' || github.event_name == 'workflow_dispatch') - needs: hil-set-matrix + needs: set-matrix uses: ./.github/workflows/build_util.yml strategy: fail-fast: false @@ -200,7 +191,7 @@ jobs: with: build-system: 'cmake' toolchain: ${{ matrix.toolchain }} - build-args: ${{ toJSON(fromJSON(needs.hil-set-matrix.outputs.json)[matrix.toolchain]) }} + build-args: ${{ toJSON(fromJSON(needs.set-matrix.outputs.hil_json)[matrix.toolchain]) }} one-per-family: true upload-artifacts: true @@ -254,7 +245,7 @@ jobs: - name: Clean workspace run: | echo "Cleaning up previous run" - rm -rf "${{ github.workspace }}" + rm -rf "${{ github.workspace }}"3 mkdir -p "${{ github.workspace }}" - name: Toolchain version -- cgit v1.3.1 From 228b2dec1c29de2db531cc4eff98444b4221ca46 Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 12 May 2025 15:40:58 +0700 Subject: bump ci to gcc 14 --- .github/actions/setup_toolchain/action.yml | 2 +- .github/actions/setup_toolchain/toolchain.json | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to '.github') diff --git a/.github/actions/setup_toolchain/action.yml b/.github/actions/setup_toolchain/action.yml index 850a3a06f..6fd5c9d4e 100644 --- a/.github/actions/setup_toolchain/action.yml +++ b/.github/actions/setup_toolchain/action.yml @@ -17,7 +17,7 @@ runs: if: inputs.toolchain == 'arm-gcc' uses: carlosperate/arm-none-eabi-gcc-action@v1 with: - release: '13.2.Rel1' + release: '14.2.Rel1' - name: Pull ESP-IDF docker if: inputs.toolchain == 'esp-idf' diff --git a/.github/actions/setup_toolchain/toolchain.json b/.github/actions/setup_toolchain/toolchain.json index 4e65f1cbe..ea07ca344 100644 --- a/.github/actions/setup_toolchain/toolchain.json +++ b/.github/actions/setup_toolchain/toolchain.json @@ -1,7 +1,7 @@ { "aarch64-gcc": "https://developer.arm.com/-/media/Files/downloads/gnu-a/10.3-2021.07/binrel/gcc-arm-10.3-2021.07-x86_64-aarch64-none-elf.tar.xz", "arm-clang": "https://github.com/ARM-software/LLVM-embedded-toolchain-for-Arm/releases/download/release-19.1.1/LLVM-ET-Arm-19.1.1-Linux-x86_64.tar.xz", - "arm-gcc": "https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v13.2.1-1.1/xpack-arm-none-eabi-gcc-13.2.1-1.1-linux-x64.tar.gz", + "arm-gcc": "https://github.com/xpack-dev-tools/gcc-xpack/releases/download/v14.2.0-1/xpack-gcc-14.2.0-1-linux-x64.tar.gz", "msp430-gcc": "http://software-dl.ti.com/msp430/msp430_public_sw/mcu/msp430/MSPGCC/9_2_0_0/export/msp430-gcc-9.2.0.50_linux64.tar.bz2", "riscv-gcc": "https://github.com/xpack-dev-tools/riscv-none-elf-gcc-xpack/releases/download/v13.2.0-2/xpack-riscv-none-elf-gcc-13.2.0-2-linux-x64.tar.gz", "rx-gcc": "https://github.com/hathach/rx_device/releases/download/0.0.1/gcc-8.3.0.202411-GNURX-ELF.run", -- cgit v1.3.1 From baf67539fc2d328a6274c35c18c90da27c37bc60 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 13 May 2025 10:28:42 +0700 Subject: fix warnings, minor clean up --- .github/actions/setup_toolchain/toolchain.json | 2 +- examples/host/cdc_msc_hid/src/hid_app.c | 100 ++++++++----------------- src/class/cdc/cdc_host.c | 2 +- src/class/hid/hid_host.c | 6 +- src/host/hub.c | 1 - src/host/usbh.c | 5 +- 6 files changed, 41 insertions(+), 75 deletions(-) (limited to '.github') diff --git a/.github/actions/setup_toolchain/toolchain.json b/.github/actions/setup_toolchain/toolchain.json index ea07ca344..f7123ef11 100644 --- a/.github/actions/setup_toolchain/toolchain.json +++ b/.github/actions/setup_toolchain/toolchain.json @@ -1,7 +1,7 @@ { "aarch64-gcc": "https://developer.arm.com/-/media/Files/downloads/gnu-a/10.3-2021.07/binrel/gcc-arm-10.3-2021.07-x86_64-aarch64-none-elf.tar.xz", "arm-clang": "https://github.com/ARM-software/LLVM-embedded-toolchain-for-Arm/releases/download/release-19.1.1/LLVM-ET-Arm-19.1.1-Linux-x86_64.tar.xz", - "arm-gcc": "https://github.com/xpack-dev-tools/gcc-xpack/releases/download/v14.2.0-1/xpack-gcc-14.2.0-1-linux-x64.tar.gz", + "arm-gcc": "https://github.com/xpack-dev-tools/arm-none-eabi-gcc-xpack/releases/download/v14.2.1-1.1/xpack-arm-none-eabi-gcc-14.2.1-1.1-linux-x64.tar.gz", "msp430-gcc": "http://software-dl.ti.com/msp430/msp430_public_sw/mcu/msp430/MSPGCC/9_2_0_0/export/msp430-gcc-9.2.0.50_linux64.tar.bz2", "riscv-gcc": "https://github.com/xpack-dev-tools/riscv-none-elf-gcc-xpack/releases/download/v13.2.0-2/xpack-riscv-none-elf-gcc-13.2.0-2-linux-x64.tar.gz", "rx-gcc": "https://github.com/hathach/rx_device/releases/download/0.0.1/gcc-8.3.0.202411-GNURX-ELF.run", diff --git a/examples/host/cdc_msc_hid/src/hid_app.c b/examples/host/cdc_msc_hid/src/hid_app.c index a751c9c80..6f01d6f45 100644 --- a/examples/host/cdc_msc_hid/src/hid_app.c +++ b/examples/host/cdc_msc_hid/src/hid_app.c @@ -29,14 +29,9 @@ //--------------------------------------------------------------------+ // MACRO TYPEDEF CONSTANT ENUM DECLARATION //--------------------------------------------------------------------+ +#define MAX_REPORT 4 -// If your host terminal support ansi escape code such as TeraTerm -// it can be use to simulate mouse cursor movement within terminal -#define USE_ANSI_ESCAPE 0 - -#define MAX_REPORT 4 - -static uint8_t const keycode2ascii[128][2] = { HID_KEYCODE_TO_ASCII }; +static uint8_t const keycode2ascii[128][2] = {HID_KEYCODE_TO_ASCII}; // Each HID instance can has multiple reports static struct { @@ -45,8 +40,8 @@ static struct { } hid_info[CFG_TUH_HID]; static void process_kbd_report(hid_keyboard_report_t const *report); -static void process_mouse_report(hid_mouse_report_t const * report); -static void process_generic_report(uint8_t dev_addr, uint8_t instance, uint8_t const* report, uint16_t len); +static void process_mouse_report(hid_mouse_report_t const *report); +static void process_generic_report(uint8_t dev_addr, uint8_t instance, uint8_t const *report, uint16_t len); void hid_app_task(void) { // nothing to do @@ -70,7 +65,7 @@ void tuh_hid_mount_cb(uint8_t dev_addr, uint8_t instance, uint8_t const *desc_re printf("HID Interface Protocol = %s\r\n", protocol_str[itf_protocol]); - // By default host stack will use activate boot protocol on supported interface. + // By default, host stack will use boot protocol on supported interface. // Therefore for this simple example, we only need to parse generic report descriptor (with built-in parser) if (itf_protocol == HID_ITF_PROTOCOL_NONE) { hid_info[instance].report_count = tuh_hid_parse_report_descriptor(hid_info[instance].report_info, MAX_REPORT, desc_report, desc_len); @@ -121,7 +116,7 @@ void tuh_hid_report_received_cb(uint8_t dev_addr, uint8_t instance, uint8_t cons //--------------------------------------------------------------------+ // look up new key in previous keys -static inline bool find_key_in_report(hid_keyboard_report_t const* report, uint8_t keycode) { +static inline bool find_key_in_report(hid_keyboard_report_t const *report, uint8_t keycode) { for (uint8_t i = 0; i < 6; i++) { if (report->keycode[i] == keycode) { return true; @@ -130,28 +125,25 @@ static inline bool find_key_in_report(hid_keyboard_report_t const* report, uint8 return false; } -static void process_kbd_report(hid_keyboard_report_t const *report) -{ - static hid_keyboard_report_t prev_report = { 0, 0, {0} }; // previous report to check key released +static void process_kbd_report(hid_keyboard_report_t const *report) { + static hid_keyboard_report_t prev_report = {0, 0, {0}};// previous report to check key released //------------- example code ignore control (non-printable) key affects -------------// - for(uint8_t i=0; i<6; i++) - { - if ( report->keycode[i] ) - { - if ( find_key_in_report(&prev_report, report->keycode[i]) ) - { + for (uint8_t i = 0; i < 6; i++) { + if (report->keycode[i]) { + if (find_key_in_report(&prev_report, report->keycode[i])) { // exist in previous report means the current key is holding - }else - { + } else { // not existed in previous report means the current key is pressed bool const is_shift = report->modifier & (KEYBOARD_MODIFIER_LEFTSHIFT | KEYBOARD_MODIFIER_RIGHTSHIFT); uint8_t ch = keycode2ascii[report->keycode[i]][is_shift ? 1 : 0]; putchar(ch); - if ( ch == '\r' ) putchar('\n'); // added new line for enter key + if (ch == '\r') { + putchar('\n'); + } - #ifndef __ICCARM__ // TODO IAR doesn't support stream control ? - fflush(stdout); // flush right away, else nanolib will wait for newline + #ifndef __ICCARM__ // TODO IAR doesn't support stream control ? + fflush(stdout);// flush right away, else nanolib will wait for newline #endif } } @@ -166,55 +158,22 @@ static void process_kbd_report(hid_keyboard_report_t const *report) //--------------------------------------------------------------------+ static void cursor_movement(int8_t x, int8_t y, int8_t wheel) { -#if USE_ANSI_ESCAPE - // Move X using ansi escape - if ( x < 0) - { - printf(ANSI_CURSOR_BACKWARD(%d), (-x)); // move left - }else if ( x > 0) - { - printf(ANSI_CURSOR_FORWARD(%d), x); // move right - } - - // Move Y using ansi escape - if ( y < 0) - { - printf(ANSI_CURSOR_UP(%d), (-y)); // move up - }else if ( y > 0) - { - printf(ANSI_CURSOR_DOWN(%d), y); // move down - } - - // Scroll using ansi escape - if (wheel < 0) - { - printf(ANSI_SCROLL_UP(%d), (-wheel)); // scroll up - }else if (wheel > 0) - { - printf(ANSI_SCROLL_DOWN(%d), wheel); // scroll down - } - - printf("\r\n"); -#else printf("(%d %d %d)\r\n", x, y, wheel); -#endif } -static void process_mouse_report(hid_mouse_report_t const * report) -{ - static hid_mouse_report_t prev_report = { 0 }; +static void process_mouse_report(hid_mouse_report_t const *report) { + static hid_mouse_report_t prev_report = {0}; - //------------- button state -------------// + // button state uint8_t button_changed_mask = report->buttons ^ prev_report.buttons; - if ( button_changed_mask & report->buttons) - { + if (button_changed_mask & report->buttons) { printf(" %c%c%c ", - report->buttons & MOUSE_BUTTON_LEFT ? 'L' : '-', - report->buttons & MOUSE_BUTTON_MIDDLE ? 'M' : '-', - report->buttons & MOUSE_BUTTON_RIGHT ? 'R' : '-'); + report->buttons & MOUSE_BUTTON_LEFT ? 'L' : '-', + report->buttons & MOUSE_BUTTON_MIDDLE ? 'M' : '-', + report->buttons & MOUSE_BUTTON_RIGHT ? 'R' : '-'); } - //------------- cursor movement -------------// + // cursor movement cursor_movement(report->x, report->y, report->wheel); } @@ -263,18 +222,23 @@ static void process_generic_report(uint8_t dev_addr, uint8_t instance, uint8_t c if (rpt_info->usage_page == HID_USAGE_PAGE_DESKTOP) { switch (rpt_info->usage) { case HID_USAGE_DESKTOP_KEYBOARD: - TU_LOG1("HID receive keyboard report\r\n"); + TU_LOG2("HID receive keyboard report\r\n"); // Assume keyboard follow boot report layout process_kbd_report((hid_keyboard_report_t const *) report); break; case HID_USAGE_DESKTOP_MOUSE: - TU_LOG1("HID receive mouse report\r\n"); + TU_LOG2("HID receive mouse report\r\n"); // Assume mouse follow boot report layout process_mouse_report((hid_mouse_report_t const *) report); break; default: + printf("report[%u] ", rpt_info->report_id); + for (uint8_t i = 0; i < len; i++) { + printf("%02X ", report[i]); + } + printf("\r\n"); break; } } diff --git a/src/class/cdc/cdc_host.c b/src/class/cdc/cdc_host.c index 4058857c5..bf245db3f 100644 --- a/src/class/cdc/cdc_host.c +++ b/src/class/cdc/cdc_host.c @@ -672,7 +672,7 @@ void cdch_close(uint8_t daddr) { bool cdch_xfer_cb(uint8_t daddr, uint8_t ep_addr, xfer_result_t event, uint32_t xferred_bytes) { // TODO handle stall response, retry failed transfer ... - TU_ASSERT(event == XFER_RESULT_SUCCESS); + TU_VERIFY(event == XFER_RESULT_SUCCESS); uint8_t const idx = get_idx_by_ep_addr(daddr, ep_addr); cdch_interface_t * p_cdc = get_itf(idx); diff --git a/src/class/hid/hid_host.c b/src/class/hid/hid_host.c index a3cc7d6d7..57e437196 100644 --- a/src/class/hid/hid_host.c +++ b/src/class/hid/hid_host.c @@ -444,7 +444,7 @@ bool hidh_xfer_cb(uint8_t daddr, uint8_t ep_addr, xfer_result_t result, uint32_t hidh_epbuf_t* epbuf = get_hid_epbuf(idx); if (dir == TUSB_DIR_IN) { - TU_LOG_DRV(" Get Report callback (%u, %u)\r\n", daddr, idx); + TU_LOG_DRV(" [idx=%u] Get Report callback\r\n", idx); TU_LOG3_MEM(epbuf->epin, xferred_bytes, 2); tuh_hid_report_received_cb(daddr, idx, epbuf->epin, (uint16_t) xferred_bytes); } else { @@ -461,7 +461,9 @@ void hidh_close(uint8_t daddr) { hidh_interface_t* p_hid = &_hidh_itf[i]; if (p_hid->daddr == daddr) { TU_LOG_DRV(" HIDh close addr = %u index = %u\r\n", daddr, i); - if (tuh_hid_umount_cb) tuh_hid_umount_cb(daddr, i); + if (tuh_hid_umount_cb) { + tuh_hid_umount_cb(daddr, i); + } tu_memclr(p_hid, sizeof(hidh_interface_t)); } } diff --git a/src/host/hub.c b/src/host/hub.c index 0ed0e0c42..0b172a596 100644 --- a/src/host/hub.c +++ b/src/host/hub.c @@ -201,7 +201,6 @@ bool hub_port_get_status(uint8_t hub_addr, uint8_t hub_port, void* resp, bool hub_port_get_status_local(uint8_t hub_addr, uint8_t hub_port, hub_port_status_response_t* resp) { (void) hub_port; - TU_VERIFY(hub_addr > CFG_TUH_DEVICE_MAX); hub_interface_t* p_hub = get_hub_itf(hub_addr); *resp = p_hub->port_status; return true; diff --git a/src/host/usbh.c b/src/host/usbh.c index a3d79a105..8ab1402dc 100644 --- a/src/host/usbh.c +++ b/src/host/usbh.c @@ -579,7 +579,8 @@ void tuh_task_ext(uint32_t timeout_ms, bool in_isr) { uint8_t const epnum = tu_edpt_number(ep_addr); uint8_t const ep_dir = (uint8_t) tu_edpt_dir(ep_addr); - TU_LOG_USBH("on EP %02X with %u bytes: %s\r\n", ep_addr, (unsigned int) event.xfer_complete.len, tu_str_xfer_result[event.xfer_complete.result]); + TU_LOG_USBH("[:%u] on EP %02X with %u bytes: %s\r\n", + event.dev_addr, ep_addr, (unsigned int) event.xfer_complete.len, tu_str_xfer_result[event.xfer_complete.result]); if (event.dev_addr == 0) { // device 0 only has control endpoint @@ -618,7 +619,7 @@ void tuh_task_ext(uint32_t timeout_ms, bool in_isr) { uint8_t drv_id = dev->ep2drv[epnum][ep_dir]; usbh_class_driver_t const* driver = get_driver(drv_id); if (driver) { - TU_LOG_USBH("%s xfer callback\r\n", driver->name); + TU_LOG_USBH(" %s xfer callback\r\n", driver->name); driver->xfer_cb(event.dev_addr, ep_addr, (xfer_result_t) event.xfer_complete.result, event.xfer_complete.len); } else { -- cgit v1.3.1 From 38e5a67461cf7c819e845a110ef67184c2becbe4 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 15 May 2025 10:27:00 +0700 Subject: bump up pio-usb and codeql version --- .github/workflows/codeql.yml | 6 +++--- tools/get_deps.py | 2 +- 2 files changed, 4 insertions(+), 4 deletions(-) (limited to '.github') diff --git a/.github/workflows/codeql.yml b/.github/workflows/codeql.yml index be4c2dd87..a22c65c79 100644 --- a/.github/workflows/codeql.yml +++ b/.github/workflows/codeql.yml @@ -66,7 +66,7 @@ jobs: # Initializes the CodeQL tools for scanning. - name: Initialize CodeQL - uses: github/codeql-action/init@v2 + uses: github/codeql-action/init@v3 with: languages: ${{ matrix.language }} # If you wish to specify custom queries, you can do so here or in a config file. @@ -93,7 +93,7 @@ jobs: ./.github/workflows/codeql-buildscript.sh - name: Perform CodeQL Analysis - uses: github/codeql-action/analyze@v2 + uses: github/codeql-action/analyze@v3 with: category: "/language:${{matrix.language}}" upload: false @@ -129,7 +129,7 @@ jobs: sarif_file: ${{ steps.step1.outputs.sarif-output }} category: "/language:${{matrix.language}}" - - name: Archive CodeQL results + - name: Upload CodeQL results as an artifact uses: actions/upload-artifact@v4 with: name: codeql-results diff --git a/tools/get_deps.py b/tools/get_deps.py index 1f46a8e05..df8dbb6e1 100755 --- a/tools/get_deps.py +++ b/tools/get_deps.py @@ -59,7 +59,7 @@ deps_optional = { '144f1eb7ea8c06512e12f12b27383601c0272410', 'kinetis_k kinetis_k32l2 kinetis_kl lpc51 lpc54 lpc55 mcx imxrt'], 'hw/mcu/raspberry_pi/Pico-PIO-USB': ['https://github.com/hathach/Pico-PIO-USB.git', - 'd15f0c62ac22348a8708e1626525fdba9466e1ee', + '032a469e79f6a4ba40760d7868e6db26e15002d7', 'rp2040'], 'hw/mcu/renesas/fsp': ['https://github.com/renesas/fsp.git', 'edcc97d684b6f716728a60d7a6fea049d9870bd6', -- cgit v1.3.1 From bffe5d97cc2f4f5a9ba8b4f09d30be97ce70a3de Mon Sep 17 00:00:00 2001 From: hathach Date: Mon, 19 May 2025 20:22:29 +0700 Subject: limit hil-hfp iar build to 4 parallel jobs --- .github/workflows/build.yml | 2 +- tools/build.py | 12 ++++++++++-- 2 files changed, 11 insertions(+), 3 deletions(-) (limited to '.github') diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml index 28447cc80..fe2ed61c9 100644 --- a/.github/workflows/build.yml +++ b/.github/workflows/build.yml @@ -266,7 +266,7 @@ jobs: run: python3 tools/get_deps.py $BUILD_ARGS - name: Build - run: python3 tools/build.py --toolchain iar $BUILD_ARGS + run: python3 tools/build.py -j 4 --toolchain iar $BUILD_ARGS - name: Test on actual hardware (hardware in the loop) run: python3 test/hil/hil_test.py hfp.json diff --git a/tools/build.py b/tools/build.py index d28ddd929..f2f6e6228 100755 --- a/tools/build.py +++ b/tools/build.py @@ -23,6 +23,7 @@ build_separator = '-' * 95 build_status = [STATUS_OK, STATUS_FAILED, STATUS_SKIPPED] verbose = False +parallel_jobs = os.cpu_count() # ----------------------------- # Helper @@ -110,13 +111,17 @@ def cmake_board(board, toolchain, build_flags_on): f'-DTOOLCHAIN={toolchain} {build_flags}') if rcmd.returncode == 0: cmd = f"cmake --build {build_dir}" - # circleci docker return $nproc as 36 core, limit parallel according to resource class. Required for IAR, also prevent crashed/killed by docker + njobs = parallel_jobs + + # circleci docker return $nproc as 36 core, limit parallel according to resource class. + # Required for IAR, also prevent crashed/killed by docker if os.getenv('CIRCLECI'): resource_class = { 'small': 1, 'medium': 2, 'medium+': 3, 'large': 4 } for rc in resource_class: if rc in os.getenv('CIRCLE_JOB'): - cmd += f' --parallel {resource_class[rc]}' + njobs = resource_class[rc] break + cmd += f' --parallel {njobs}' rcmd = run_cmd(cmd) ret[0 if rcmd.returncode == 0 else 1] += 1 @@ -211,6 +216,7 @@ def build_family(family, toolchain, build_system, build_flags_on, one_per_family # ----------------------------- def main(): global verbose + global parallel_jobs parser = argparse.ArgumentParser() parser.add_argument('families', nargs='*', default=[], help='Families to build') @@ -219,6 +225,7 @@ def main(): parser.add_argument('-s', '--build-system', default='cmake', help='Build system to use, default is cmake') parser.add_argument('-f1', '--build-flags-on', action='append', default=[], help='Build flag to pass to build system') parser.add_argument('-1', '--one-per-family', action='store_true', default=False, help='Build only one random board inside a family') + parser.add_argument('-j', '--jobs', type=int, default=os.cpu_count(), help='Number of jobs to run in parallel') parser.add_argument('-v', '--verbose', action='store_true', help='Verbose output') args = parser.parse_args() @@ -229,6 +236,7 @@ def main(): build_flags_on = args.build_flags_on one_per_family = args.one_per_family verbose = args.verbose + parallel_jobs = args.jobs if len(families) == 0 and len(boards) == 0: print("Please specify families or board to build") -- cgit v1.3.1 From a484b2e37291dfe5062348d3460bffc60e04e366 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 21 May 2025 15:59:55 +0700 Subject: update bug template to include commit SHA --- .github/ISSUE_TEMPLATE/bug_report.yml | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to '.github') diff --git a/.github/ISSUE_TEMPLATE/bug_report.yml b/.github/ISSUE_TEMPLATE/bug_report.yml index d00ee78bd..35576a439 100644 --- a/.github/ISSUE_TEMPLATE/bug_report.yml +++ b/.github/ISSUE_TEMPLATE/bug_report.yml @@ -22,10 +22,17 @@ body: validations: required: true + - type: input + attributes: + label: Commit SHA + placeholder: e.g 3a042b37da28d0ba1e5593eb1068ca5645d77b56 or version bundled by esp-idf or pico-sdk + validations: + required: true + - type: input attributes: label: Board - placeholder: e.g Feather nRF52840 Express + placeholder: e.g Adafruit Feather nRF52840 Express validations: required: true -- cgit v1.3.1 From 132c55aca0aa9bb68b4ffb96ec89947e08e19b88 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 28 May 2025 08:38:26 +0700 Subject: add OPT_MCU_MAX32665 --- .github/workflows/codeql.yml | 2 +- src/CMakeLists.txt | 5 +---- src/tusb_option.h | 1 + tools/build.py | 4 ++-- 4 files changed, 5 insertions(+), 7 deletions(-) (limited to '.github') diff --git a/.github/workflows/codeql.yml b/.github/workflows/codeql.yml index a22c65c79..dfcca6315 100644 --- a/.github/workflows/codeql.yml +++ b/.github/workflows/codeql.yml @@ -124,7 +124,7 @@ jobs: output: ${{ steps.step1.outputs.sarif-output }}/cpp.sarif - name: Upload SARIF - uses: github/codeql-action/upload-sarif@v2 + uses: github/codeql-action/upload-sarif@v3 with: sarif_file: ${{ steps.step1.outputs.sarif-output }} category: "/language:${{matrix.language}}" diff --git a/src/CMakeLists.txt b/src/CMakeLists.txt index 55c52033c..99d3059fc 100644 --- a/src/CMakeLists.txt +++ b/src/CMakeLists.txt @@ -1,9 +1,6 @@ -# TODO more docs and example on how to use this file -# TINYUSB_TARGET_PREFIX and TINYUSB_TARGET_SUFFIX can be used to change the name of the target - cmake_minimum_required(VERSION 3.20) -# Add tinyusb to a existing target +# Add tinyusb to a existing target, DCD and HCD drivers are not included function(tinyusb_target_add TARGET) target_sources(${TARGET} PRIVATE # common diff --git a/src/tusb_option.h b/src/tusb_option.h index 6d733a429..104f669c9 100644 --- a/src/tusb_option.h +++ b/src/tusb_option.h @@ -195,6 +195,7 @@ // Analog Devices #define OPT_MCU_MAX32690 2400 ///< ADI MAX32690 +#define OPT_MCU_MAX32665 2401 ///< ADI MAX32666/5 #define OPT_MCU_MAX32666 2401 ///< ADI MAX32666/5 #define OPT_MCU_MAX32650 2402 ///< ADI MAX32650/1/2 #define OPT_MCU_MAX78002 2403 ///< ADI MAX78002 diff --git a/tools/build.py b/tools/build.py index f2f6e6228..6e73681fe 100755 --- a/tools/build.py +++ b/tools/build.py @@ -101,13 +101,13 @@ def cmake_board(board, toolchain, build_flags_on): if build_utils.skip_example(example, board): ret[2] += 1 else: - rcmd = run_cmd(f'cmake examples/{example} -B {build_dir}/{example} -G "Ninja" ' + rcmd = run_cmd(f'cmake examples/{example} -B {build_dir}/{example} -G Ninja ' f'-DBOARD={board} {build_flags}') if rcmd.returncode == 0: rcmd = run_cmd(f'cmake --build {build_dir}/{example}') ret[0 if rcmd.returncode == 0 else 1] += 1 else: - rcmd = run_cmd(f'cmake examples -B {build_dir} -G "Ninja" -DBOARD={board} -DCMAKE_BUILD_TYPE=MinSizeRel ' + rcmd = run_cmd(f'cmake examples -B {build_dir} -G Ninja -DBOARD={board} -DCMAKE_BUILD_TYPE=MinSizeRel ' f'-DTOOLCHAIN={toolchain} {build_flags}') if rcmd.returncode == 0: cmd = f"cmake --build {build_dir}" -- cgit v1.3.1 From b56265f38182b71e39179a88ddaeca4786e6b780 Mon Sep 17 00:00:00 2001 From: hathach Date: Tue, 10 Jun 2025 22:28:03 +0700 Subject: merge all maxim (32650, 32666, 32690, 78002) family into common bsp/maxim. Only support cmake build system rename hw/mcu/analog/max32 to hw/mcu/analog/msdk --- .github/workflows/ci_set_matrix.py | 2 +- hw/bsp/espressif/family.cmake | 2 - hw/bsp/family_support.cmake | 16 +- hw/bsp/max32650/FreeRTOSConfig/FreeRTOSConfig.h | 149 ---------------- hw/bsp/max32650/README.md | 46 ----- hw/bsp/max32650/boards/max32650evkit/board.cmake | 10 -- hw/bsp/max32650/boards/max32650evkit/board.h | 61 ------- hw/bsp/max32650/boards/max32650evkit/board.mk | 2 - hw/bsp/max32650/boards/max32650evkit/max32650.ld | 119 ------------- hw/bsp/max32650/boards/max32650fthr/board.cmake | 10 -- hw/bsp/max32650/boards/max32650fthr/board.h | 62 ------- hw/bsp/max32650/boards/max32650fthr/board.mk | 2 - hw/bsp/max32650/boards/max32650fthr/max32650.ld | 119 ------------- hw/bsp/max32650/boards/max32651evkit/board.cmake | 30 ---- hw/bsp/max32650/boards/max32651evkit/board.h | 61 ------- hw/bsp/max32650/boards/max32651evkit/board.mk | 5 - hw/bsp/max32650/boards/max32651evkit/max32651.ld | 132 -------------- hw/bsp/max32650/family.c | 177 ------------------- hw/bsp/max32650/family.cmake | 169 ------------------ hw/bsp/max32650/family.mk | 140 --------------- hw/bsp/max32666/FreeRTOSConfig/FreeRTOSConfig.h | 149 ---------------- hw/bsp/max32666/README.md | 32 ---- hw/bsp/max32666/boards/max32666evkit/board.cmake | 1 - hw/bsp/max32666/boards/max32666evkit/board.h | 62 ------- hw/bsp/max32666/boards/max32666evkit/board.mk | 1 - hw/bsp/max32666/boards/max32666fthr/board.cmake | 1 - hw/bsp/max32666/boards/max32666fthr/board.h | 62 ------- hw/bsp/max32666/boards/max32666fthr/board.mk | 1 - hw/bsp/max32666/family.c | 177 ------------------- hw/bsp/max32666/family.cmake | 147 ---------------- hw/bsp/max32666/family.mk | 93 ---------- hw/bsp/max32666/max32666.ld | 135 -------------- hw/bsp/max32690/FreeRTOSConfig/FreeRTOSConfig.h | 149 ---------------- hw/bsp/max32690/README.md | 31 ---- hw/bsp/max32690/boards/apard32690/board.cmake | 1 - hw/bsp/max32690/boards/apard32690/board.h | 61 ------- hw/bsp/max32690/boards/apard32690/board.mk | 1 - hw/bsp/max32690/boards/max32690evkit/board.cmake | 1 - hw/bsp/max32690/boards/max32690evkit/board.h | 61 ------- hw/bsp/max32690/boards/max32690evkit/board.mk | 1 - hw/bsp/max32690/family.c | 175 ------------------- hw/bsp/max32690/family.cmake | 152 ---------------- hw/bsp/max32690/family.mk | 101 ----------- hw/bsp/max32690/max32690.ld | 164 ----------------- hw/bsp/max78002/FreeRTOSConfig/FreeRTOSConfig.h | 149 ---------------- hw/bsp/max78002/README.md | 28 --- hw/bsp/max78002/boards/max78002evkit/board.cmake | 1 - hw/bsp/max78002/boards/max78002evkit/board.h | 63 ------- hw/bsp/max78002/boards/max78002evkit/board.mk | 1 - hw/bsp/max78002/family.c | 173 ------------------ hw/bsp/max78002/family.cmake | 166 ------------------ hw/bsp/max78002/family.mk | 99 ----------- hw/bsp/max78002/max78002.ld | 182 ------------------- hw/bsp/maxim/FreeRTOSConfig/FreeRTOSConfig.h | 149 ++++++++++++++++ hw/bsp/maxim/README.md | 43 +++++ hw/bsp/maxim/boards/apard32690/board.cmake | 4 + hw/bsp/maxim/boards/apard32690/board.h | 61 +++++++ hw/bsp/maxim/boards/max32650evkit/board.cmake | 8 + hw/bsp/maxim/boards/max32650evkit/board.h | 61 +++++++ hw/bsp/maxim/boards/max32650fthr/board.cmake | 8 + hw/bsp/maxim/boards/max32650fthr/board.h | 62 +++++++ hw/bsp/maxim/boards/max32651evkit/board.cmake | 31 ++++ hw/bsp/maxim/boards/max32651evkit/board.h | 61 +++++++ hw/bsp/maxim/boards/max32666evkit/board.cmake | 4 + hw/bsp/maxim/boards/max32666evkit/board.h | 62 +++++++ hw/bsp/maxim/boards/max32666fthr/board.cmake | 4 + hw/bsp/maxim/boards/max32666fthr/board.h | 62 +++++++ hw/bsp/maxim/boards/max32690evkit/board.cmake | 4 + hw/bsp/maxim/boards/max32690evkit/board.h | 61 +++++++ hw/bsp/maxim/boards/max78002evkit/board.cmake | 4 + hw/bsp/maxim/boards/max78002evkit/board.h | 63 +++++++ hw/bsp/maxim/family.c | 213 +++++++++++++++++++++++ hw/bsp/maxim/family.cmake | 205 ++++++++++++++++++++++ hw/bsp/maxim/linker/max32650.ld | 119 +++++++++++++ hw/bsp/maxim/linker/max32651.ld | 132 ++++++++++++++ hw/bsp/maxim/linker/max32665.ld | 135 ++++++++++++++ hw/bsp/maxim/linker/max32690.ld | 164 +++++++++++++++++ hw/bsp/maxim/linker/max78002.ld | 182 +++++++++++++++++++ tools/get_deps.py | 4 +- 79 files changed, 1916 insertions(+), 3925 deletions(-) delete mode 100644 hw/bsp/max32650/FreeRTOSConfig/FreeRTOSConfig.h delete mode 100644 hw/bsp/max32650/README.md delete mode 100644 hw/bsp/max32650/boards/max32650evkit/board.cmake delete mode 100644 hw/bsp/max32650/boards/max32650evkit/board.h delete mode 100644 hw/bsp/max32650/boards/max32650evkit/board.mk delete mode 100644 hw/bsp/max32650/boards/max32650evkit/max32650.ld delete mode 100644 hw/bsp/max32650/boards/max32650fthr/board.cmake delete mode 100644 hw/bsp/max32650/boards/max32650fthr/board.h delete mode 100644 hw/bsp/max32650/boards/max32650fthr/board.mk delete mode 100644 hw/bsp/max32650/boards/max32650fthr/max32650.ld delete mode 100644 hw/bsp/max32650/boards/max32651evkit/board.cmake delete mode 100644 hw/bsp/max32650/boards/max32651evkit/board.h delete mode 100644 hw/bsp/max32650/boards/max32651evkit/board.mk delete mode 100644 hw/bsp/max32650/boards/max32651evkit/max32651.ld delete mode 100644 hw/bsp/max32650/family.c delete mode 100644 hw/bsp/max32650/family.cmake delete mode 100644 hw/bsp/max32650/family.mk delete mode 100644 hw/bsp/max32666/FreeRTOSConfig/FreeRTOSConfig.h delete mode 100644 hw/bsp/max32666/README.md delete mode 100644 hw/bsp/max32666/boards/max32666evkit/board.cmake delete mode 100644 hw/bsp/max32666/boards/max32666evkit/board.h delete mode 100644 hw/bsp/max32666/boards/max32666evkit/board.mk delete mode 100644 hw/bsp/max32666/boards/max32666fthr/board.cmake delete mode 100644 hw/bsp/max32666/boards/max32666fthr/board.h delete mode 100644 hw/bsp/max32666/boards/max32666fthr/board.mk delete mode 100644 hw/bsp/max32666/family.c delete mode 100644 hw/bsp/max32666/family.cmake delete mode 100644 hw/bsp/max32666/family.mk delete mode 100644 hw/bsp/max32666/max32666.ld delete mode 100644 hw/bsp/max32690/FreeRTOSConfig/FreeRTOSConfig.h delete mode 100644 hw/bsp/max32690/README.md delete mode 100644 hw/bsp/max32690/boards/apard32690/board.cmake delete mode 100644 hw/bsp/max32690/boards/apard32690/board.h delete mode 100644 hw/bsp/max32690/boards/apard32690/board.mk delete mode 100644 hw/bsp/max32690/boards/max32690evkit/board.cmake delete mode 100644 hw/bsp/max32690/boards/max32690evkit/board.h delete mode 100644 hw/bsp/max32690/boards/max32690evkit/board.mk delete mode 100644 hw/bsp/max32690/family.c delete mode 100644 hw/bsp/max32690/family.cmake delete mode 100644 hw/bsp/max32690/family.mk delete mode 100644 hw/bsp/max32690/max32690.ld delete mode 100644 hw/bsp/max78002/FreeRTOSConfig/FreeRTOSConfig.h delete mode 100644 hw/bsp/max78002/README.md delete mode 100644 hw/bsp/max78002/boards/max78002evkit/board.cmake delete mode 100644 hw/bsp/max78002/boards/max78002evkit/board.h delete mode 100644 hw/bsp/max78002/boards/max78002evkit/board.mk delete mode 100644 hw/bsp/max78002/family.c delete mode 100644 hw/bsp/max78002/family.cmake delete mode 100644 hw/bsp/max78002/family.mk delete mode 100644 hw/bsp/max78002/max78002.ld create mode 100644 hw/bsp/maxim/FreeRTOSConfig/FreeRTOSConfig.h create mode 100644 hw/bsp/maxim/README.md create mode 100644 hw/bsp/maxim/boards/apard32690/board.cmake create mode 100644 hw/bsp/maxim/boards/apard32690/board.h create mode 100644 hw/bsp/maxim/boards/max32650evkit/board.cmake create mode 100644 hw/bsp/maxim/boards/max32650evkit/board.h create mode 100644 hw/bsp/maxim/boards/max32650fthr/board.cmake create mode 100644 hw/bsp/maxim/boards/max32650fthr/board.h create mode 100644 hw/bsp/maxim/boards/max32651evkit/board.cmake create mode 100644 hw/bsp/maxim/boards/max32651evkit/board.h create mode 100644 hw/bsp/maxim/boards/max32666evkit/board.cmake create mode 100644 hw/bsp/maxim/boards/max32666evkit/board.h create mode 100644 hw/bsp/maxim/boards/max32666fthr/board.cmake create mode 100644 hw/bsp/maxim/boards/max32666fthr/board.h create mode 100644 hw/bsp/maxim/boards/max32690evkit/board.cmake create mode 100644 hw/bsp/maxim/boards/max32690evkit/board.h create mode 100644 hw/bsp/maxim/boards/max78002evkit/board.cmake create mode 100644 hw/bsp/maxim/boards/max78002evkit/board.h create mode 100644 hw/bsp/maxim/family.c create mode 100644 hw/bsp/maxim/family.cmake create mode 100644 hw/bsp/maxim/linker/max32650.ld create mode 100644 hw/bsp/maxim/linker/max32651.ld create mode 100644 hw/bsp/maxim/linker/max32665.ld create mode 100644 hw/bsp/maxim/linker/max32690.ld create mode 100644 hw/bsp/maxim/linker/max78002.ld (limited to '.github') diff --git a/.github/workflows/ci_set_matrix.py b/.github/workflows/ci_set_matrix.py index fa73dc1b6..bccb07e3e 100755 --- a/.github/workflows/ci_set_matrix.py +++ b/.github/workflows/ci_set_matrix.py @@ -24,7 +24,7 @@ family_list = { "lpc11 lpc13 lpc15": ["arm-gcc", "arm-clang"], "lpc17 lpc18 lpc40 lpc43": ["arm-gcc", "arm-clang"], "lpc51 lpc54 lpc55": ["arm-gcc", "arm-clang"], - "max32650 max32666 max32690 max78002": ["arm-gcc"], + "maxim": ["arm-gcc"], "mcx": ["arm-gcc"], "mm32": ["arm-gcc"], "msp430": ["msp430-gcc"], diff --git a/hw/bsp/espressif/family.cmake b/hw/bsp/espressif/family.cmake index b544689d9..2aad7d185 100644 --- a/hw/bsp/espressif/family.cmake +++ b/hw/bsp/espressif/family.cmake @@ -32,8 +32,6 @@ endif () # Add example src and bsp directories set(EXTRA_COMPONENT_DIRS "src" "${CMAKE_CURRENT_LIST_DIR}/boards" "${CMAKE_CURRENT_LIST_DIR}/components") - -# set SDKCONFIG for each IDF Target set(SDKCONFIG ${CMAKE_BINARY_DIR}/sdkconfig) include($ENV{IDF_PATH}/tools/cmake/project.cmake) diff --git a/hw/bsp/family_support.cmake b/hw/bsp/family_support.cmake index 3a6890690..ac1276f7d 100644 --- a/hw/bsp/family_support.cmake +++ b/hw/bsp/family_support.cmake @@ -482,7 +482,7 @@ function(family_flash_openocd TARGET) # note skip verify since it has issue with rp2040 add_custom_target(${TARGET}-openocd DEPENDS ${TARGET} - COMMAND ${OPENOCD} -c "tcl_port disabled" -c "gdb_port disabled" ${OPTION_LIST} -c init -c halt -c "program $" -c reset ${OPTION_LIST2} -c exit + COMMAND ${OPENOCD} -c "tcl_port disabled; gdb_port disabled" ${OPTION_LIST} -c "init; halt; program $" -c reset ${OPTION_LIST2} -c exit VERBATIM ) endfunction() @@ -502,10 +502,16 @@ endfunction() # Add flash openocd adi (Analog Devices) target # included with msdk or compiled from release branch of https://github.com/analogdevicesinc/openocd function(family_flash_openocd_adi TARGET) - if (DEFINED $ENV{MAXIM_PATH}) - # use openocd from msdk - set(OPENOCD ENV{MAXIM_PATH}/Tools/OpenOCD/openocd) - set(OPENOCD_OPTION2 "-s ENV{MAXIM_PATH}/Tools/OpenOCD/scripts") + if (DEFINED MAXIM_PATH) + # use openocd from msdk with MAXIM_PATH cmake variable first if the user specified it + set(OPENOCD ${MAXIM_PATH}/Tools/OpenOCD/openocd) + set(OPENOCD_OPTION2 "-s ${MAXIM_PATH}/Tools/OpenOCD/scripts") + elseif (DEFINED ENV{MAXIM_PATH}) + # use openocd from msdk with MAXIM_PATH environment variable. Normalize + # since msdk can be Windows (MinGW) or Linux + file(TO_CMAKE_PATH "$ENV{MAXIM_PATH}" MAXIM_PATH_NORM) + set(OPENOCD ${MAXIM_PATH_NORM}/Tools/OpenOCD/openocd) + set(OPENOCD_OPTION2 "-s ${MAXIM_PATH_NORM}/Tools/OpenOCD/scripts") else() # compiled from source if (NOT DEFINED OPENOCD_ADI_PATH) diff --git a/hw/bsp/max32650/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/max32650/FreeRTOSConfig/FreeRTOSConfig.h deleted file mode 100644 index e5a76af85..000000000 --- a/hw/bsp/max32650/FreeRTOSConfig/FreeRTOSConfig.h +++ /dev/null @@ -1,149 +0,0 @@ -/* - * FreeRTOS Kernel V10.0.0 - * Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining a copy of - * this software and associated documentation files (the "Software"), to deal in - * the Software without restriction, including without limitation the rights to - * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of - * the Software, and to permit persons to whom the Software is furnished to do so, - * subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in all - * copies or substantial portions of the Software. If you wish to use our Amazon - * FreeRTOS name, please do so in a fair use way that does not cause confusion. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS - * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR - * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER - * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN - * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. - * - * http://www.FreeRTOS.org - * http://aws.amazon.com/freertos - * - * 1 tab == 4 spaces! - */ - - -#ifndef FREERTOS_CONFIG_H -#define FREERTOS_CONFIG_H - -/*----------------------------------------------------------- - * Application specific definitions. - * - * These definitions should be adjusted for your particular hardware and - * application requirements. - * - * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE - * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE. - * - * See http://www.freertos.org/a00110.html. - *----------------------------------------------------------*/ - -// skip if included from IAR assembler -#ifndef __IASMARM__ - #include "mxc_device.h" -#endif - -/* Cortex M23/M33 port configuration. */ -#define configENABLE_MPU 0 -#define configENABLE_FPU 1 -#define configENABLE_TRUSTZONE 0 -#define configMINIMAL_SECURE_STACK_SIZE (1024) - -#define configUSE_PREEMPTION 1 -#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0 -#define configCPU_CLOCK_HZ SystemCoreClock -#define configTICK_RATE_HZ ( 1000 ) -#define configMAX_PRIORITIES ( 5 ) -#define configMINIMAL_STACK_SIZE ( 128 ) -#define configTOTAL_HEAP_SIZE ( configSUPPORT_DYNAMIC_ALLOCATION*4*1024 ) -#define configMAX_TASK_NAME_LEN 16 -#define configUSE_16_BIT_TICKS 0 -#define configIDLE_SHOULD_YIELD 1 -#define configUSE_MUTEXES 1 -#define configUSE_RECURSIVE_MUTEXES 1 -#define configUSE_COUNTING_SEMAPHORES 1 -#define configQUEUE_REGISTRY_SIZE 4 -#define configUSE_QUEUE_SETS 0 -#define configUSE_TIME_SLICING 0 -#define configUSE_NEWLIB_REENTRANT 0 -#define configENABLE_BACKWARD_COMPATIBILITY 1 -#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 - -#define configSUPPORT_STATIC_ALLOCATION 1 -#define configSUPPORT_DYNAMIC_ALLOCATION 0 - -/* Hook function related definitions. */ -#define configUSE_IDLE_HOOK 0 -#define configUSE_TICK_HOOK 0 -#define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning -#define configCHECK_FOR_STACK_OVERFLOW 2 -#define configCHECK_HANDLER_INSTALLATION 0 - -/* Run time and task stats gathering related definitions. */ -#define configGENERATE_RUN_TIME_STATS 0 -#define configRECORD_STACK_HIGH_ADDRESS 1 -#define configUSE_TRACE_FACILITY 1 // legacy trace -#define configUSE_STATS_FORMATTING_FUNCTIONS 0 - -/* Co-routine definitions. */ -#define configUSE_CO_ROUTINES 0 -#define configMAX_CO_ROUTINE_PRIORITIES 2 - -/* Software timer related definitions. */ -#define configUSE_TIMERS 1 -#define configTIMER_TASK_PRIORITY (configMAX_PRIORITIES-2) -#define configTIMER_QUEUE_LENGTH 32 -#define configTIMER_TASK_STACK_DEPTH configMINIMAL_STACK_SIZE - -/* Optional functions - most linkers will remove unused functions anyway. */ -#define INCLUDE_vTaskPrioritySet 0 -#define INCLUDE_uxTaskPriorityGet 0 -#define INCLUDE_vTaskDelete 0 -#define INCLUDE_vTaskSuspend 1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY -#define INCLUDE_xResumeFromISR 0 -#define INCLUDE_vTaskDelayUntil 1 -#define INCLUDE_vTaskDelay 1 -#define INCLUDE_xTaskGetSchedulerState 0 -#define INCLUDE_xTaskGetCurrentTaskHandle 1 -#define INCLUDE_uxTaskGetStackHighWaterMark 0 -#define INCLUDE_xTaskGetIdleTaskHandle 0 -#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0 -#define INCLUDE_pcTaskGetTaskName 0 -#define INCLUDE_eTaskGetState 0 -#define INCLUDE_xEventGroupSetBitFromISR 0 -#define INCLUDE_xTimerPendFunctionCall 0 - -/* FreeRTOS hooks to NVIC vectors */ -#define xPortPendSVHandler PendSV_Handler -#define xPortSysTickHandler SysTick_Handler -#define vPortSVCHandler SVC_Handler - -//--------------------------------------------------------------------+ -// Interrupt nesting behavior configuration. -//--------------------------------------------------------------------+ - -// For Cortex-M specific: __NVIC_PRIO_BITS is defined in mcu header -#define configPRIO_BITS __NVIC_PRIO_BITS - -/* The lowest interrupt priority that can be used in a call to a "set priority" function. */ -#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY ((1<-jlink` target for CMake. - -Both the Evaluation Kit and Feather boards are shipped with a CMSIS-DAP -compatible debug probe. However, at the time of writing, the necessary flashing -algorithms for OpenOCD have not yet been incorporated into the OpenOCD master -branch. To utilize the provided debug probes, please install the bundled MSDK -package which includes the appropriate OpenOCD modifications. To leverage this -OpenOCD instance, run the `flash-msdk` Makefile rule, or `-msdk` CMake -target. - -### MAX32651 - -The MAX32651 features an integrated secure bootloader which requires the -application image be signed prior to flashing. Both the Makefile and CMake -scripts account for this signing automatically when building for the -MAX32651EVKIT. - -To flash the signed image, the MSDK's OpenOCD variant must be used. To flash -the MAX32651EVKIT please install the bundled MSDK, and utilize the `flash-msdk` -and `-msdk` rule and target. diff --git a/hw/bsp/max32650/boards/max32650evkit/board.cmake b/hw/bsp/max32650/boards/max32650evkit/board.cmake deleted file mode 100644 index fffdcc9fb..000000000 --- a/hw/bsp/max32650/boards/max32650evkit/board.cmake +++ /dev/null @@ -1,10 +0,0 @@ -# Use the standard, non-secure linker file -set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/max32650.ld) - -function(update_board_extras TARGET) - #No extra arguments -endfunction() - -function(prepare_image TARGET_IN) - #No signing required -endfunction() diff --git a/hw/bsp/max32650/boards/max32650evkit/board.h b/hw/bsp/max32650/boards/max32650evkit/board.h deleted file mode 100644 index 65ed2659e..000000000 --- a/hw/bsp/max32650/boards/max32650evkit/board.h +++ /dev/null @@ -1,61 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2024, Brent Kowal (Analog Devices, Inc) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -/* metadata: - name: MAX32650 EVKIT - url: https://www.analog.com/en/resources/evaluation-hardware-and-software/evaluation-boards-kits/max32650-evkit.html#eb-overview -*/ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#include "gpio.h" -#include "mxc_sys.h" - -#ifdef __cplusplus -extern "C" { -#endif - -// LED -#define LED_PORT MXC_GPIO2 -#define LED_PIN MXC_GPIO_PIN_25 -#define LED_VDDIO MXC_GPIO_VSSEL_VDDIOH -#define LED_STATE_ON 0 - -// Button -#define BUTTON_PORT MXC_GPIO2 -#define BUTTON_PIN MXC_GPIO_PIN_28 -#define BUTTON_PULL MXC_GPIO_PAD_WEAK_PULL_UP -#define BUTTON_STATE_ACTIVE 0 - -// UART Enable for EvKit's Integrated FTDI Adapter. Pin Mux handled by the HAL -#define UART_NUM 0 - -#ifdef __cplusplus -} -#endif - -#endif /* BOARD_H_ */ diff --git a/hw/bsp/max32650/boards/max32650evkit/board.mk b/hw/bsp/max32650/boards/max32650evkit/board.mk deleted file mode 100644 index 0bc210e11..000000000 --- a/hw/bsp/max32650/boards/max32650evkit/board.mk +++ /dev/null @@ -1,2 +0,0 @@ -# Use the standard, non-secure linker file -LD_FILE = $(BOARD_PATH)/max32650.ld diff --git a/hw/bsp/max32650/boards/max32650evkit/max32650.ld b/hw/bsp/max32650/boards/max32650evkit/max32650.ld deleted file mode 100644 index 0e56a91ec..000000000 --- a/hw/bsp/max32650/boards/max32650evkit/max32650.ld +++ /dev/null @@ -1,119 +0,0 @@ -MEMORY { - ROM (rx) : ORIGIN = 0x00000000, LENGTH = 0x00010000 /* 64kB ROM */ - FLASH (rx) : ORIGIN = 0x10000000, LENGTH = 0x00300000 /* 3MB flash */ - SRAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00100000 /* 1MB SRAM */ -} - -SECTIONS { - .text : - { - _text = .; - KEEP(*(.isr_vector)) - *(.text*) /* program code */ - *(.rodata*) /* read-only data: "const" */ - - KEEP(*(.init)) - KEEP(*(.fini)) - - /* .ctors */ - *crtbegin.o(.ctors) - *crtbegin?.o(.ctors) - *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) - *(SORT(.ctors.*)) - *(.ctors) - - /* .dtors */ - *crtbegin.o(.dtors) - *crtbegin?.o(.dtors) - *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) - *(SORT(.dtors.*)) - *(.dtors) - - /* C++ Exception handling */ - KEEP(*(.eh_frame*)) - _etext = .; - } > FLASH - - .ARM.extab : - { - *(.ARM.extab* .gnu.linkonce.armextab.*) - } > FLASH - - /* it's used for C++ exception handling */ - /* we need to keep this to avoid overlapping */ - .ARM.exidx : - { - __exidx_start = .; - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - __exidx_end = .; - } > FLASH - - .data : - { - _data = ALIGN(., 4); - *(vtable) - *(.data*) /*read-write initialized data: initialized global variable*/ - *(.spix_config*) /* SPIX configuration functions need to be run from SRAM */ - *(.flashprog*) /* Flash program */ - - - /* These array sections are used by __libc_init_array to call static C++ constructors */ - . = ALIGN(4); - /* preinit data */ - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP(*(.preinit_array)) - PROVIDE_HIDDEN (__preinit_array_end = .); - - . = ALIGN(4); - /* init data */ - PROVIDE_HIDDEN (__init_array_start = .); - KEEP(*(SORT(.init_array.*))) - KEEP(*(.init_array)) - PROVIDE_HIDDEN (__init_array_end = .); - - . = ALIGN(4); - /* finit data */ - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP(*(SORT(.fini_array.*))) - KEEP(*(.fini_array)) - PROVIDE_HIDDEN (__fini_array_end = .); - - _edata = ALIGN(., 4); - } > SRAM AT>FLASH - __load_data = LOADADDR(.data); - .bss : - { - . = ALIGN(4); - _bss = .; - *(.bss*) /*read-write zero initialized data: uninitialized global variable*/ - *(COMMON) - _ebss = ALIGN(., 4); - } > SRAM - - /* Set stack top to end of RAM, and stack limit move down by - * size of stack_dummy section */ - __StackTop = ORIGIN(SRAM) + LENGTH(SRAM); - __StackLimit = __StackTop - SIZEOF(.stack_dummy); - - /* .stack_dummy section doesn't contains any symbols. It is only - * used for linker to calculate size of stack sections, and assign - * values to stack symbols later */ - .stack_dummy (COPY): - { - *(.stack*) - } > SRAM - - .heap (COPY): - { - . = ALIGN(4); - PROVIDE ( end = . ); - PROVIDE ( _end = . ); - *(.heap*) - __HeapLimit = ABSOLUTE(__StackLimit); - } > SRAM - - PROVIDE(__stack = __StackTop); - - /* Check if data + heap + stack exceeds RAM limit */ - ASSERT(__StackLimit >= _ebss, "region RAM overflowed with stack") -} diff --git a/hw/bsp/max32650/boards/max32650fthr/board.cmake b/hw/bsp/max32650/boards/max32650fthr/board.cmake deleted file mode 100644 index fffdcc9fb..000000000 --- a/hw/bsp/max32650/boards/max32650fthr/board.cmake +++ /dev/null @@ -1,10 +0,0 @@ -# Use the standard, non-secure linker file -set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/max32650.ld) - -function(update_board_extras TARGET) - #No extra arguments -endfunction() - -function(prepare_image TARGET_IN) - #No signing required -endfunction() diff --git a/hw/bsp/max32650/boards/max32650fthr/board.h b/hw/bsp/max32650/boards/max32650fthr/board.h deleted file mode 100644 index 755fa15b5..000000000 --- a/hw/bsp/max32650/boards/max32650fthr/board.h +++ /dev/null @@ -1,62 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2024, Brent Kowal (Analog Devices, Inc) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -/* metadata: - name: MAX32650 Feather - url: https://www.analog.com/en/resources/evaluation-hardware-and-software/evaluation-boards-kits/max32650fthr.html -*/ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#include "gpio.h" -#include "mxc_sys.h" - -#ifdef __cplusplus -extern "C" { -#endif - -// LED -#define LED_PORT MXC_GPIO1 -#define LED_PIN MXC_GPIO_PIN_14 -#define LED_VDDIO MXC_GPIO_VSSEL_VDDIO -#define LED_STATE_ON 0 - -// Button -#define BUTTON_PORT MXC_GPIO1 -#define BUTTON_PIN MXC_GPIO_PIN_19 -#define BUTTON_PULL MXC_GPIO_PAD_WEAK_PULL_UP -#define BUTTON_STATE_ACTIVE 0 - -// UART Enable for SWD UART Pins. Pin Mux handled by the HAL -#define UART_NUM 0 - - -#ifdef __cplusplus -} -#endif - -#endif /* BOARD_H_ */ diff --git a/hw/bsp/max32650/boards/max32650fthr/board.mk b/hw/bsp/max32650/boards/max32650fthr/board.mk deleted file mode 100644 index 0bc210e11..000000000 --- a/hw/bsp/max32650/boards/max32650fthr/board.mk +++ /dev/null @@ -1,2 +0,0 @@ -# Use the standard, non-secure linker file -LD_FILE = $(BOARD_PATH)/max32650.ld diff --git a/hw/bsp/max32650/boards/max32650fthr/max32650.ld b/hw/bsp/max32650/boards/max32650fthr/max32650.ld deleted file mode 100644 index 0e56a91ec..000000000 --- a/hw/bsp/max32650/boards/max32650fthr/max32650.ld +++ /dev/null @@ -1,119 +0,0 @@ -MEMORY { - ROM (rx) : ORIGIN = 0x00000000, LENGTH = 0x00010000 /* 64kB ROM */ - FLASH (rx) : ORIGIN = 0x10000000, LENGTH = 0x00300000 /* 3MB flash */ - SRAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00100000 /* 1MB SRAM */ -} - -SECTIONS { - .text : - { - _text = .; - KEEP(*(.isr_vector)) - *(.text*) /* program code */ - *(.rodata*) /* read-only data: "const" */ - - KEEP(*(.init)) - KEEP(*(.fini)) - - /* .ctors */ - *crtbegin.o(.ctors) - *crtbegin?.o(.ctors) - *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) - *(SORT(.ctors.*)) - *(.ctors) - - /* .dtors */ - *crtbegin.o(.dtors) - *crtbegin?.o(.dtors) - *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) - *(SORT(.dtors.*)) - *(.dtors) - - /* C++ Exception handling */ - KEEP(*(.eh_frame*)) - _etext = .; - } > FLASH - - .ARM.extab : - { - *(.ARM.extab* .gnu.linkonce.armextab.*) - } > FLASH - - /* it's used for C++ exception handling */ - /* we need to keep this to avoid overlapping */ - .ARM.exidx : - { - __exidx_start = .; - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - __exidx_end = .; - } > FLASH - - .data : - { - _data = ALIGN(., 4); - *(vtable) - *(.data*) /*read-write initialized data: initialized global variable*/ - *(.spix_config*) /* SPIX configuration functions need to be run from SRAM */ - *(.flashprog*) /* Flash program */ - - - /* These array sections are used by __libc_init_array to call static C++ constructors */ - . = ALIGN(4); - /* preinit data */ - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP(*(.preinit_array)) - PROVIDE_HIDDEN (__preinit_array_end = .); - - . = ALIGN(4); - /* init data */ - PROVIDE_HIDDEN (__init_array_start = .); - KEEP(*(SORT(.init_array.*))) - KEEP(*(.init_array)) - PROVIDE_HIDDEN (__init_array_end = .); - - . = ALIGN(4); - /* finit data */ - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP(*(SORT(.fini_array.*))) - KEEP(*(.fini_array)) - PROVIDE_HIDDEN (__fini_array_end = .); - - _edata = ALIGN(., 4); - } > SRAM AT>FLASH - __load_data = LOADADDR(.data); - .bss : - { - . = ALIGN(4); - _bss = .; - *(.bss*) /*read-write zero initialized data: uninitialized global variable*/ - *(COMMON) - _ebss = ALIGN(., 4); - } > SRAM - - /* Set stack top to end of RAM, and stack limit move down by - * size of stack_dummy section */ - __StackTop = ORIGIN(SRAM) + LENGTH(SRAM); - __StackLimit = __StackTop - SIZEOF(.stack_dummy); - - /* .stack_dummy section doesn't contains any symbols. It is only - * used for linker to calculate size of stack sections, and assign - * values to stack symbols later */ - .stack_dummy (COPY): - { - *(.stack*) - } > SRAM - - .heap (COPY): - { - . = ALIGN(4); - PROVIDE ( end = . ); - PROVIDE ( _end = . ); - *(.heap*) - __HeapLimit = ABSOLUTE(__StackLimit); - } > SRAM - - PROVIDE(__stack = __StackTop); - - /* Check if data + heap + stack exceeds RAM limit */ - ASSERT(__StackLimit >= _ebss, "region RAM overflowed with stack") -} diff --git a/hw/bsp/max32650/boards/max32651evkit/board.cmake b/hw/bsp/max32650/boards/max32651evkit/board.cmake deleted file mode 100644 index bd8077a42..000000000 --- a/hw/bsp/max32650/boards/max32651evkit/board.cmake +++ /dev/null @@ -1,30 +0,0 @@ -# Use the secure linker file -set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/max32651.ld) - -function(update_board_extras TARGET) - # for the signed target, need to add the __SLA_FWK__ define - target_compile_definitions(${TARGET} PUBLIC - __SLA_FWK__ - ) -endfunction() - -function(prepare_image TARGET_IN) - #For the signed target, set up a POST_BUILD command to sign the elf file once - #created - if((WIN32) OR (MINGW) OR (MSYS)) - set(SIGN_EXE "sign_app.exe") - else() - set(SIGN_EXE "sign_app") - endif() - set(MCU_PATH "${TOP}/hw/mcu/analog/max32/") - - # Custom POST_BUILD command - add_custom_command( - TARGET ${TARGET_IN} POST_BUILD - COMMAND ${CMAKE_OBJCOPY} $ -R .sig -O binary $/${TARGET_IN}.bin - COMMAND ${MCU_PATH}/Tools/SBT/bin/${SIGN_EXE} -c MAX32651 key_file=${MCU_PATH}/Tools/SBT/devices/MAX32651/keys/maximtestcrk.key - ca=$/${TARGET_IN}.bin sca=$/${TARGET_IN}.sbin - COMMAND ${CMAKE_OBJCOPY} $ --update-section .sig=$/${TARGET_IN}.sig - VERBATIM - ) -endfunction() diff --git a/hw/bsp/max32650/boards/max32651evkit/board.h b/hw/bsp/max32650/boards/max32651evkit/board.h deleted file mode 100644 index 0b49ff309..000000000 --- a/hw/bsp/max32650/boards/max32651evkit/board.h +++ /dev/null @@ -1,61 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2024, Brent Kowal (Analog Devices, Inc) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -/* metadata: - name: MAX32651 EVKIT - url: https://www.analog.com/en/resources/evaluation-hardware-and-software/evaluation-boards-kits/max32651-evkit.html -*/ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#include "gpio.h" -#include "mxc_sys.h" - -#ifdef __cplusplus -extern "C" { -#endif - -// LED -#define LED_PORT MXC_GPIO2 -#define LED_PIN MXC_GPIO_PIN_25 -#define LED_VDDIO MXC_GPIO_VSSEL_VDDIOH -#define LED_STATE_ON 0 - -// Button -#define BUTTON_PORT MXC_GPIO2 -#define BUTTON_PIN MXC_GPIO_PIN_28 -#define BUTTON_PULL MXC_GPIO_PAD_WEAK_PULL_UP -#define BUTTON_STATE_ACTIVE 0 - -// UART Enable for EvKit's Integrated FTDI Adapter. Pin Mux handled by the HAL -#define UART_NUM 0 - -#ifdef __cplusplus -} -#endif - -#endif /* BOARD_H_ */ diff --git a/hw/bsp/max32650/boards/max32651evkit/board.mk b/hw/bsp/max32650/boards/max32651evkit/board.mk deleted file mode 100644 index b609598c1..000000000 --- a/hw/bsp/max32650/boards/max32651evkit/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# Use the secure linker file -LD_FILE = $(BOARD_PATH)/max32651.ld - -# Let the family script know the build needs to be signed -SIGNED_BUILD := 1 diff --git a/hw/bsp/max32650/boards/max32651evkit/max32651.ld b/hw/bsp/max32650/boards/max32651evkit/max32651.ld deleted file mode 100644 index 3921d10f2..000000000 --- a/hw/bsp/max32650/boards/max32651evkit/max32651.ld +++ /dev/null @@ -1,132 +0,0 @@ -MEMORY { - HEADER (rx): ORIGIN = 0x10000000, LENGTH = 0x200 - FLASH (rx) : ORIGIN = 0x10000200, LENGTH = 0x002FFE00 /* 3MB flash */ - SRAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00100000 /* 1MB SRAM */ -} - -/* Added Oct 9, 2018 to go to correct reset vector. */ -ENTRY(Reset_Handler) -PROVIDE( _start_SWAP = (((Reset_Handler) >> 24) | (((Reset_Handler) & 0x00FF0000) >> 8) | (((Reset_Handler) & 0x0000FF00) << 8) | ((Reset_Handler) << 24))); -PROVIDE_HIDDEN( _SLA_Size = _endimage - __end_header ); -PROVIDE( _SLA_Size_SWAP = (((_SLA_Size) >> 24) | (((_SLA_Size) & 0x00FF0000) >> 8) | (((_SLA_Size) & 0x0000FF00) << 8) | ((_SLA_Size) << 24))); - -/* Sections Definitions */ -SECTIONS { - .sb_sla_header : ALIGN(4) - { - FILL(0xFF) - KEEP(*(.sb_sla_header)) /* Header for ROM code */ - __end_header = . ; - . = ALIGN(512); - } > HEADER - - .text : - { - _text = .; - KEEP(*(.isr_vector)) - *(.text*) /* program code */ - *(.rodata*) /* read-only data: "const" */ - - KEEP(*(.init)) - KEEP(*(.fini)) - - /* C++ Exception handling */ - KEEP(*(.eh_frame*)) - _etext = .; - } > FLASH - - /* it's used for C++ exception handling */ - /* we need to keep this to avoid overlapping */ - .ARM.exidx : - { - __exidx_start = .; - *(.ARM.exidx*) - __exidx_end = .; - } > FLASH - - .data : - { - _data = ALIGN(., 4); - *(.data*) /*read-write initialized data: initialized global variable*/ - *(.spix_config*) /* SPIX configuration functions need to be run from SRAM */ - *(.flashprog*) /* Flash program */ - - - /* These array sections are used by __libc_init_array to call static C++ constructors */ - . = ALIGN(4); - /* preinit data */ - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP(*(.preinit_array)) - PROVIDE_HIDDEN (__preinit_array_end = .); - - . = ALIGN(4); - /* init data */ - PROVIDE_HIDDEN (__init_array_start = .); - KEEP(*(SORT(.init_array.*))) - KEEP(*(.init_array)) - PROVIDE_HIDDEN (__init_array_end = .); - - . = ALIGN(4); - /* finit data */ - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP(*(SORT(.fini_array.*))) - KEEP(*(.fini_array)) - PROVIDE_HIDDEN (__fini_array_end = .); - - _edata = ALIGN(., 4); - } > SRAM AT>FLASH - __load_data = LOADADDR(.data); - _enddata = LOADADDR(.data)+SIZEOF(.data); - - .sb_sla_trailer : AT(_enddata) - { - KEEP(*(.sb_sla_trailer)) - /* Align image with 16 byte boundary to conform to flash encryption block size. */ - FILL(0xDEADC0DE); - /* NOTE: The FILL and ALIGN will not work unless something is written to the section. So, we use LONG. */ - LONG(0xDEADC0DE); - . = ALIGN(16); - } > FLASH - _endimage = LOADADDR(.sb_sla_trailer)+SIZEOF(.sb_sla_trailer); - .sig : - { - KEEP(*(.sig)) - LONG(0xDEADBEEF); - - } > FLASH - .bss : - { - . = ALIGN(4); - _bss = .; - *(.bss*) /*read-write zero initialized data: uninitialized global variable*/ - *(COMMON) - _ebss = ALIGN(., 4); - } > SRAM - - /* Set stack top to end of RAM, and stack limit move down by - * size of stack_dummy section */ - __StackTop = ORIGIN(SRAM) + LENGTH(SRAM); - __StackLimit = __StackTop - SIZEOF(.stack_dummy); - - /* .stack_dummy section doesn't contains any symbols. It is only - * used for linker to calculate size of stack sections, and assign - * values to stack symbols later */ - .stack_dummy (COPY): - { - *(.stack*) - } > SRAM - - .heap (COPY): - { - . = ALIGN(4); - PROVIDE ( end = . ); - PROVIDE ( _end = . ); - *(.heap*) - __HeapLimit = ABSOLUTE(__StackLimit); - } > SRAM - - PROVIDE(__stack = __StackTop); - - /* Check if data + heap + stack exceeds RAM limit */ - ASSERT(__StackLimit >= _ebss, "region RAM overflowed with stack") -} diff --git a/hw/bsp/max32650/family.c b/hw/bsp/max32650/family.c deleted file mode 100644 index 8f0e56734..000000000 --- a/hw/bsp/max32650/family.c +++ /dev/null @@ -1,177 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2024 Brent Kowal (Analog Devices, Inc) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -/* metadata: - manufacturer: Analog Devices -*/ - -#ifdef __GNUC__ -#pragma GCC diagnostic push -#pragma GCC diagnostic ignored "-Wstrict-prototypes" // _mxc_crit_get_state() -#endif - -#include "gpio.h" -#include "mxc_sys.h" -#include "mxc_device.h" -#include "uart.h" - -#ifdef __GNUC__ -#pragma GCC diagnostic pop -#endif - -#include "board.h" -#include "bsp/board_api.h" - - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ -void USB_IRQHandler(void) { - tud_int_handler(0); -} - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM -//--------------------------------------------------------------------+ -mxc_uart_regs_t *ConsoleUart = MXC_UART_GET_UART(UART_NUM); - -void board_init(void) { -#if CFG_TUSB_OS == OPT_OS_NONE - // 1ms tick timer - SysTick_Config(SystemCoreClock / 1000); -#elif CFG_TUSB_OS == OPT_OS_FREERTOS - // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) - NVIC_SetPriority(USB_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); -#endif - mxc_gpio_cfg_t gpioConfig; - - // LED - gpioConfig.drvstr = MXC_GPIO_DRVSTR_0; - gpioConfig.func = MXC_GPIO_FUNC_OUT; - gpioConfig.mask = LED_PIN; - gpioConfig.pad = MXC_GPIO_PAD_NONE; - gpioConfig.port = LED_PORT; - gpioConfig.vssel = LED_VDDIO; - MXC_GPIO_Config(&gpioConfig); - board_led_write(false); - - // Button - gpioConfig.drvstr = MXC_GPIO_DRVSTR_0; - gpioConfig.func = MXC_GPIO_FUNC_IN; - gpioConfig.mask = BUTTON_PIN; - gpioConfig.pad = BUTTON_PULL; - gpioConfig.port = BUTTON_PORT; - gpioConfig.vssel = MXC_GPIO_VSSEL_VDDIO; - MXC_GPIO_Config(&gpioConfig); - - // UART - MXC_UART_Init(ConsoleUart, CFG_BOARD_UART_BAUDRATE); - - //USB - // Startup the HIRC96M clock if it's not on already - if (!(MXC_GCR->clk_ctrl & MXC_F_GCR_CLK_CTRL_HIRC96_EN)) { - MXC_GCR->clk_ctrl |= MXC_F_GCR_CLK_CTRL_HIRC96_EN; - MXC_SYS_Clock_Timeout(MXC_F_GCR_CLK_CTRL_HIRC96_RDY); - } - - MXC_SYS_ClockEnable(MXC_SYS_PERIPH_CLOCK_USB); - MXC_SYS_Reset_Periph(MXC_SYS_RESET_USB); -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) { -#if LED_STATE_ON - state = !state; -#endif - if (state) { - MXC_GPIO_OutClr(LED_PORT, LED_PIN); - } else { - MXC_GPIO_OutSet(LED_PORT, LED_PIN); - } -} - -uint32_t board_button_read(void) { - uint32_t state = MXC_GPIO_InGet(BUTTON_PORT, BUTTON_PIN) ? 1 : 0; - return BUTTON_STATE_ACTIVE == state; -} - -size_t board_get_unique_id(uint8_t id[], size_t max_len) { - uint8_t hw_id[13];//USN Buffer - MXC_SYS_GetUSN(hw_id, 13); - - size_t act_len = TU_MIN(max_len, 13); - memcpy(id, hw_id, act_len); - return act_len; -} - -int board_uart_read(uint8_t *buf, int len) { - int uart_val; - int act_len = 0; - - while (act_len < len) { - if ((uart_val = MXC_UART_ReadCharacterRaw(ConsoleUart)) == E_UNDERFLOW) { - break; - } else { - *buf++ = (uint8_t) uart_val; - act_len++; - } - } - return act_len; -} - -int board_uart_write(void const *buf, int len) { - int act_len = 0; - const uint8_t *ch_ptr = (const uint8_t *) buf; - while (act_len < len) { - MXC_UART_WriteCharacter(ConsoleUart, *ch_ptr++); - act_len++; - } - return len; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; - -void SysTick_Handler(void) { - system_ticks++; -} - -uint32_t board_millis(void) { - return system_ticks; -} -#endif - -void HardFault_Handler(void) { - __asm("BKPT #0\n"); -} - -// Required by __libc_init_array in startup code if we are compiling using -// -nostdlib/-nostartfiles. -void _init(void) { -} diff --git a/hw/bsp/max32650/family.cmake b/hw/bsp/max32650/family.cmake deleted file mode 100644 index b1d5dded7..000000000 --- a/hw/bsp/max32650/family.cmake +++ /dev/null @@ -1,169 +0,0 @@ -include_guard() - -set(MAX32_PERIPH ${TOP}/hw/mcu/analog/max32/Libraries/PeriphDrivers) -set(MAX32_CMSIS ${TOP}/hw/mcu/analog/max32/Libraries/CMSIS) -set(CMSIS_5 ${TOP}/lib/CMSIS_5) - -# include board specific information and functions -include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) - -# Get the linker file -set(LD_FILE_Clang ${LD_FILE_GNU}) - -# toolchain set up -set(CMAKE_SYSTEM_CPU cortex-m4 CACHE INTERNAL "System Processor") -set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) -set(JLINK_DEVICE max32650) -set(OPENOCD_OPTION "-f interface/cmsis-dap.cfg -f target/max32650.cfg") - -set(FAMILY_MCUS MAX32650 CACHE INTERNAL "") - -function(update_board TARGET) - target_compile_definitions(${TARGET} PUBLIC - TARGET=MAX32650 - TARGET_REV=0x4131 - MXC_ASSERT_ENABLE - MAX32650 - IAR_PRAGMAS=0 - CFG_TUSB_MCU=OPT_MCU_MAX32650 - BOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED - ) - - # Run any board specific updates - update_board_extras(${TARGET}) -endfunction() - -#------------------------------------ -# BOARD_TARGET -#------------------------------------ -# only need to be built ONCE for all examples -function(add_board_target BOARD_TARGET) - if (TARGET ${BOARD_TARGET}) - return() - endif () - - # Startup & Linker script - set(STARTUP_FILE_GNU ${MAX32_CMSIS}/Device/Maxim/MAX32650/Source/GCC/startup_max32650.S) - set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) - - set(PERIPH_SRC ${MAX32_PERIPH}/Source) - add_library(${BOARD_TARGET} STATIC - ${MAX32_CMSIS}/Device/Maxim/MAX32650/Source/heap.c - ${MAX32_CMSIS}/Device/Maxim/MAX32650/Source/header_MAX32650.c - ${MAX32_CMSIS}/Device/Maxim/MAX32650/Source/system_max32650.c - ${PERIPH_SRC}/SYS/mxc_assert.c - ${PERIPH_SRC}/SYS/mxc_delay.c - ${PERIPH_SRC}/SYS/mxc_lock.c - ${PERIPH_SRC}/SYS/nvic_table.c - ${PERIPH_SRC}/SYS/pins_me10.c - ${PERIPH_SRC}/SYS/sys_me10.c - ${PERIPH_SRC}/TPU/tpu_me10.c - ${PERIPH_SRC}/TPU/tpu_reva.c - ${PERIPH_SRC}/FLC/flc_common.c - ${PERIPH_SRC}/FLC/flc_me10.c - ${PERIPH_SRC}/FLC/flc_reva.c - ${PERIPH_SRC}/GPIO/gpio_common.c - ${PERIPH_SRC}/GPIO/gpio_me10.c - ${PERIPH_SRC}/GPIO/gpio_reva.c - ${PERIPH_SRC}/ICC/icc_me10.c - ${PERIPH_SRC}/ICC/icc_reva.c - ${PERIPH_SRC}/ICC/icc_common.c - ${PERIPH_SRC}/UART/uart_common.c - ${PERIPH_SRC}/UART/uart_me10.c - ${PERIPH_SRC}/UART/uart_reva.c - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} - ) - target_include_directories(${BOARD_TARGET} PUBLIC - ${CMAKE_CURRENT_FUNCTION_LIST_DIR} - ${MAX32_CMSIS}/Include - ${MAX32_CMSIS}/Device/Maxim/MAX32650/Include - ${MAX32_PERIPH}/Include/MAX32650 - ${PERIPH_SRC}/SYS - ${PERIPH_SRC}/GPIO - ${PERIPH_SRC}/TPU - ${PERIPH_SRC}/ICC - ${PERIPH_SRC}/FLC - ${PERIPH_SRC}/UART - ) - - target_compile_options(${BOARD_TARGET} PRIVATE - -Wno-error=strict-prototypes - ) - update_board(${BOARD_TARGET}) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - -nostartfiles - --specs=nosys.specs --specs=nano.specs - -u sb_header #Needed when linking libraries to not lose the Signing header - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_Clang}" - ) - endif () -endfunction() - - -#------------------------------------ -# Functions -#------------------------------------ -function(family_configure_example TARGET RTOS) - family_configure_common(${TARGET} ${RTOS}) - - # Board target - add_board_target(board_${BOARD}) - - #---------- Port Specific ---------- - # These files are built for each example since it depends on example's tusb_config.h - target_sources(${TARGET} PUBLIC - # BSP - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c - ) - target_include_directories(${TARGET} PUBLIC - # family, hw, board - ${CMAKE_CURRENT_FUNCTION_LIST_DIR} - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} - ) - - # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_MAX32650) - target_sources(${TARGET} PUBLIC - ${TOP}/src/portable/mentor/musb/dcd_musb.c - ) - target_compile_options(${TARGET} PRIVATE - -Wno-error=strict-prototypes - ) - - target_link_libraries(${TARGET} PUBLIC board_${BOARD}) - target_compile_options(${TARGET} PRIVATE - -Wno-error=strict-prototypes - ) - - - - # Flashing - family_add_bin_hex(${TARGET}) - family_flash_jlink(${TARGET}) - family_flash_openocd_adi(${TARGET}) - - # Add the optional MSDK OpenOCD flashing - family_flash_msdk(${TARGET}) -endfunction() - -function(family_flash_msdk TARGET) - # Prepare the image (signed) if the board requires it - prepare_image(${TARGET}) - - set(MAXIM_PATH "$ENV{MAXIM_PATH}") - add_custom_target(${TARGET}-msdk - DEPENDS ${TARGET} - COMMAND ${MAXIM_PATH}/Tools/OpenOCD/openocd -s ${MAXIM_PATH}/Tools/OpenOCD/scripts - -f interface/cmsis-dap.cfg -f target/max32650.cfg - -c "program $ verify; init; reset; exit" - VERBATIM - ) -endfunction() diff --git a/hw/bsp/max32650/family.mk b/hw/bsp/max32650/family.mk deleted file mode 100644 index d2fc293e4..000000000 --- a/hw/bsp/max32650/family.mk +++ /dev/null @@ -1,140 +0,0 @@ -DEPS_SUBMODULES += lib/CMSIS_5 hw/mcu/analog/max32 - -# Important locations in the hw support for MCU -MAX32_CMSIS = hw/mcu/analog/max32/Libraries/CMSIS -MAX32_PERIPH = hw/mcu/analog/max32/Libraries/PeriphDrivers - -# Add any board specific make rules -include $(TOP)/$(BOARD_PATH)/board.mk - -CPU_CORE ?= cortex-m4 -PORT ?= 0 - -# GCC -SRC_S_GCC += $(MAX32_CMSIS)/Device/Maxim/MAX32650/Source/GCC/startup_max32650.S - -# -------------- -# Compiler Flags -# -------------- -# Flags for the MAX32650/1/2 SDK -CFLAGS += -DTARGET=MAX32650 \ - -DTARGET_REV=0x4131 \ - -DMXC_ASSERT_ENABLE \ - -DMAX32650 \ - -DIAR_PRAGMAS=0 - -# Flags for TUSB features -CFLAGS += \ - -DCFG_TUSB_MCU=OPT_MCU_MAX32650 \ - -DBOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED - -# mcu driver cause following warnings -CFLAGS += -Wno-error=strict-prototypes \ - -Wno-error=unused-parameter \ - -Wno-error=cast-align \ - -Wno-error=cast-qual \ - -Wno-error=sign-compare - -LDFLAGS_GCC += -nostartfiles --specs=nosys.specs --specs=nano.specs - -# Configure the flash rule. By default, use JLink. -SIGNED_BUILD ?= 0 -DEFAULT_FLASH = flash-jlink - -# If the applications needs to be signed (for the MAX32651), sign it first and -# then need to use MSDK's OpenOCD to flash it -# Also need to include the __SLA_FWK__ define to enable the signed header into -# memory -ifeq ($(SIGNED_BUILD), 1) -# Extra definitions to build for the secure part -CFLAGS += -D__SLA_FWK__ -DEFAULT_FLASH := sign-build flash-msdk -endif - -# For flash-jlink target -JLINK_DEVICE = max32650 - -# Configure the flash rule -flash: $(DEFAULT_FLASH) - -# ----------------- -# Sources & Include -# ----------------- -PERIPH_SRC = $(TOP)/$(MAX32_PERIPH)/Source -SRC_C += \ - src/portable/mentor/musb/dcd_musb.c \ - $(MAX32_CMSIS)/Device/Maxim/MAX32650/Source/heap.c \ - $(MAX32_CMSIS)/Device/Maxim/MAX32650/Source/system_max32650.c \ - $(MAX32_CMSIS)/Device/Maxim/MAX32650/Source/header_MAX32650.c \ - $(PERIPH_SRC)/SYS/mxc_assert.c \ - $(PERIPH_SRC)/SYS/mxc_delay.c \ - $(PERIPH_SRC)/SYS/mxc_lock.c \ - $(PERIPH_SRC)/SYS/nvic_table.c \ - $(PERIPH_SRC)/SYS/pins_me10.c \ - $(PERIPH_SRC)/SYS/sys_me10.c \ - $(PERIPH_SRC)/FLC/flc_common.c \ - $(PERIPH_SRC)/FLC/flc_me10.c \ - $(PERIPH_SRC)/FLC/flc_reva.c \ - $(PERIPH_SRC)/GPIO/gpio_common.c \ - $(PERIPH_SRC)/GPIO/gpio_me10.c \ - $(PERIPH_SRC)/GPIO/gpio_reva.c \ - $(PERIPH_SRC)/ICC/icc_me10.c \ - $(PERIPH_SRC)/ICC/icc_reva.c \ - $(PERIPH_SRC)/ICC/icc_common.c \ - $(PERIPH_SRC)/TPU/tpu_me10.c \ - $(PERIPH_SRC)/TPU/tpu_reva.c \ - $(PERIPH_SRC)/UART/uart_common.c \ - $(PERIPH_SRC)/UART/uart_me10.c \ - $(PERIPH_SRC)/UART/uart_reva.c \ - -INC += \ - $(TOP)/$(BOARD_PATH) \ - $(TOP)/$(MAX32_CMSIS)/Include \ - $(TOP)/$(MAX32_CMSIS)/Device/Maxim/MAX32650/Include \ - $(TOP)/$(MAX32_PERIPH)/Include/MAX32650 \ - $(PERIPH_SRC)/SYS \ - $(PERIPH_SRC)/GPIO \ - $(PERIPH_SRC)/ICC \ - $(PERIPH_SRC)/FLC \ - $(PERIPH_SRC)/TPU \ - $(PERIPH_SRC)/UART - - -# The MAX32651EVKIT is pin for pin identical to the MAX32650EVKIT, however the -# MAX32651 has a secure bootloader which requires the image to be signed before -# loading into flash. All MAX32651EVKIT's have the same key for evaluation -# purposes, so create a special flash rule to sign the binary and flash using -# the MSDK. -MCU_PATH = $(TOP)/hw/mcu/analog/max32/ -# Assume no extension for sign utility -SIGN_EXE = sign_app -ifeq ($(OS), Windows_NT) -# Must use .exe extension on Windows, since the binaries -# for Linux may live in the same place. -SIGN_EXE := sign_app.exe -else -UNAME = $(shell uname -s) -ifneq ($(findstring MSYS_NT,$(UNAME)),) -# Must also use .exe extension for MSYS2 -SIGN_EXE := sign_app.exe -endif -endif - -# Rule to sign the build. This will in-place modify the existing .elf file -# an populate the .sig section with the signature value -sign-build: $(BUILD)/$(PROJECT).elf - $(OBJCOPY) $(BUILD)/$(PROJECT).elf -R .sig -O binary $(BUILD)/$(PROJECT).bin - $(MCU_PATH)/Tools/SBT/bin/$(SIGN_EXE) -c MAX32651 \ - key_file="$(MCU_PATH)/Tools/SBT/devices/MAX32651/keys/maximtestcrk.key" \ - ca=$(BUILD)/$(PROJECT).bin sca=$(BUILD)/$(PROJECT).sbin - $(OBJCOPY) $(BUILD)/$(PROJECT).elf --update-section .sig=$(BUILD)/$(PROJECT).sig - -# Optional flash option when running within an installed MSDK to use OpenOCD -# Mainline OpenOCD does not yet have the MAX32's flash algorithm integrated. -# If the MSDK is installed, flash-msdk can be run to utilize the the modified -# openocd with the algorithms -MAXIM_PATH := $(subst \,/,$(MAXIM_PATH)) -flash-msdk: $(BUILD)/$(PROJECT).elf - $(MAXIM_PATH)/Tools/OpenOCD/openocd -s $(MAXIM_PATH)/Tools/OpenOCD/scripts \ - -f interface/cmsis-dap.cfg -f target/max32650.cfg \ - -c "program $(BUILD)/$(PROJECT).elf verify; init; reset; exit" diff --git a/hw/bsp/max32666/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/max32666/FreeRTOSConfig/FreeRTOSConfig.h deleted file mode 100644 index e5a76af85..000000000 --- a/hw/bsp/max32666/FreeRTOSConfig/FreeRTOSConfig.h +++ /dev/null @@ -1,149 +0,0 @@ -/* - * FreeRTOS Kernel V10.0.0 - * Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining a copy of - * this software and associated documentation files (the "Software"), to deal in - * the Software without restriction, including without limitation the rights to - * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of - * the Software, and to permit persons to whom the Software is furnished to do so, - * subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in all - * copies or substantial portions of the Software. If you wish to use our Amazon - * FreeRTOS name, please do so in a fair use way that does not cause confusion. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS - * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR - * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER - * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN - * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. - * - * http://www.FreeRTOS.org - * http://aws.amazon.com/freertos - * - * 1 tab == 4 spaces! - */ - - -#ifndef FREERTOS_CONFIG_H -#define FREERTOS_CONFIG_H - -/*----------------------------------------------------------- - * Application specific definitions. - * - * These definitions should be adjusted for your particular hardware and - * application requirements. - * - * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE - * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE. - * - * See http://www.freertos.org/a00110.html. - *----------------------------------------------------------*/ - -// skip if included from IAR assembler -#ifndef __IASMARM__ - #include "mxc_device.h" -#endif - -/* Cortex M23/M33 port configuration. */ -#define configENABLE_MPU 0 -#define configENABLE_FPU 1 -#define configENABLE_TRUSTZONE 0 -#define configMINIMAL_SECURE_STACK_SIZE (1024) - -#define configUSE_PREEMPTION 1 -#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0 -#define configCPU_CLOCK_HZ SystemCoreClock -#define configTICK_RATE_HZ ( 1000 ) -#define configMAX_PRIORITIES ( 5 ) -#define configMINIMAL_STACK_SIZE ( 128 ) -#define configTOTAL_HEAP_SIZE ( configSUPPORT_DYNAMIC_ALLOCATION*4*1024 ) -#define configMAX_TASK_NAME_LEN 16 -#define configUSE_16_BIT_TICKS 0 -#define configIDLE_SHOULD_YIELD 1 -#define configUSE_MUTEXES 1 -#define configUSE_RECURSIVE_MUTEXES 1 -#define configUSE_COUNTING_SEMAPHORES 1 -#define configQUEUE_REGISTRY_SIZE 4 -#define configUSE_QUEUE_SETS 0 -#define configUSE_TIME_SLICING 0 -#define configUSE_NEWLIB_REENTRANT 0 -#define configENABLE_BACKWARD_COMPATIBILITY 1 -#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 - -#define configSUPPORT_STATIC_ALLOCATION 1 -#define configSUPPORT_DYNAMIC_ALLOCATION 0 - -/* Hook function related definitions. */ -#define configUSE_IDLE_HOOK 0 -#define configUSE_TICK_HOOK 0 -#define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning -#define configCHECK_FOR_STACK_OVERFLOW 2 -#define configCHECK_HANDLER_INSTALLATION 0 - -/* Run time and task stats gathering related definitions. */ -#define configGENERATE_RUN_TIME_STATS 0 -#define configRECORD_STACK_HIGH_ADDRESS 1 -#define configUSE_TRACE_FACILITY 1 // legacy trace -#define configUSE_STATS_FORMATTING_FUNCTIONS 0 - -/* Co-routine definitions. */ -#define configUSE_CO_ROUTINES 0 -#define configMAX_CO_ROUTINE_PRIORITIES 2 - -/* Software timer related definitions. */ -#define configUSE_TIMERS 1 -#define configTIMER_TASK_PRIORITY (configMAX_PRIORITIES-2) -#define configTIMER_QUEUE_LENGTH 32 -#define configTIMER_TASK_STACK_DEPTH configMINIMAL_STACK_SIZE - -/* Optional functions - most linkers will remove unused functions anyway. */ -#define INCLUDE_vTaskPrioritySet 0 -#define INCLUDE_uxTaskPriorityGet 0 -#define INCLUDE_vTaskDelete 0 -#define INCLUDE_vTaskSuspend 1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY -#define INCLUDE_xResumeFromISR 0 -#define INCLUDE_vTaskDelayUntil 1 -#define INCLUDE_vTaskDelay 1 -#define INCLUDE_xTaskGetSchedulerState 0 -#define INCLUDE_xTaskGetCurrentTaskHandle 1 -#define INCLUDE_uxTaskGetStackHighWaterMark 0 -#define INCLUDE_xTaskGetIdleTaskHandle 0 -#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0 -#define INCLUDE_pcTaskGetTaskName 0 -#define INCLUDE_eTaskGetState 0 -#define INCLUDE_xEventGroupSetBitFromISR 0 -#define INCLUDE_xTimerPendFunctionCall 0 - -/* FreeRTOS hooks to NVIC vectors */ -#define xPortPendSVHandler PendSV_Handler -#define xPortSysTickHandler SysTick_Handler -#define vPortSVCHandler SVC_Handler - -//--------------------------------------------------------------------+ -// Interrupt nesting behavior configuration. -//--------------------------------------------------------------------+ - -// For Cortex-M specific: __NVIC_PRIO_BITS is defined in mcu header -#define configPRIO_BITS __NVIC_PRIO_BITS - -/* The lowest interrupt priority that can be used in a call to a "set priority" function. */ -#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY ((1<-jlink` target for CMake. - -Both the Evaluation Kit and Feather boards are shipped with a CMSIS-DAP -compatible debug probe. However, at the time of writing, the necessary flashing -algorithms for OpenOCD have not yet been incorporated into the OpenOCD master -branch. To utilize the provided debug probes, please install the bundled MSDK -package which includes the appropriate OpenOCD modifications. To leverage this -OpenOCD instance, run the `flash-msdk` Makefile rule, or `-msdk` CMake -target. diff --git a/hw/bsp/max32666/boards/max32666evkit/board.cmake b/hw/bsp/max32666/boards/max32666evkit/board.cmake deleted file mode 100644 index 9dc6962eb..000000000 --- a/hw/bsp/max32666/boards/max32666evkit/board.cmake +++ /dev/null @@ -1 +0,0 @@ -# Nothing to be done at the board level diff --git a/hw/bsp/max32666/boards/max32666evkit/board.h b/hw/bsp/max32666/boards/max32666evkit/board.h deleted file mode 100644 index 54589444d..000000000 --- a/hw/bsp/max32666/boards/max32666evkit/board.h +++ /dev/null @@ -1,62 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2024, Brent Kowal (Analog Devices, Inc) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -/* metadata: - name: MAX32666 EVKIT - url: https://www.analog.com/en/resources/evaluation-hardware-and-software/evaluation-boards-kits/max32666evkit.html -*/ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#include "gpio.h" -#include "mxc_sys.h" - -#ifdef __cplusplus -extern "C" { -#endif - -// LED -#define LED_PORT MXC_GPIO1 -#define LED_PIN MXC_GPIO_PIN_14 -#define LED_VDDIO MXC_GPIO_VSSEL_VDDIOH -#define LED_STATE_ON 0 - -// Button -#define BUTTON_PORT MXC_GPIO1 -#define BUTTON_PIN MXC_GPIO_PIN_6 -#define BUTTON_PULL MXC_GPIO_PAD_PULL_UP -#define BUTTON_STATE_ACTIVE 0 - -// UART Enable for EvKit's Integrated FTDI Adapter. Pin Mux handled by the HAL -#define UART_NUM 1 -#define UART_MAP MAP_A - -#ifdef __cplusplus -} -#endif - -#endif /* BOARD_H_ */ diff --git a/hw/bsp/max32666/boards/max32666evkit/board.mk b/hw/bsp/max32666/boards/max32666evkit/board.mk deleted file mode 100644 index a813a5327..000000000 --- a/hw/bsp/max32666/boards/max32666evkit/board.mk +++ /dev/null @@ -1 +0,0 @@ -# No specific build requirements for the board. diff --git a/hw/bsp/max32666/boards/max32666fthr/board.cmake b/hw/bsp/max32666/boards/max32666fthr/board.cmake deleted file mode 100644 index 9dc6962eb..000000000 --- a/hw/bsp/max32666/boards/max32666fthr/board.cmake +++ /dev/null @@ -1 +0,0 @@ -# Nothing to be done at the board level diff --git a/hw/bsp/max32666/boards/max32666fthr/board.h b/hw/bsp/max32666/boards/max32666fthr/board.h deleted file mode 100644 index 0caea5934..000000000 --- a/hw/bsp/max32666/boards/max32666fthr/board.h +++ /dev/null @@ -1,62 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2024, Brent Kowal (Analog Devices, Inc) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -/* metadata: - name: MAX32666 Feather - url: https://www.analog.com/en/resources/evaluation-hardware-and-software/evaluation-boards-kits/max32666fthr.html -*/ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#include "gpio.h" -#include "mxc_sys.h" - -#ifdef __cplusplus -extern "C" { -#endif - -// LED -#define LED_PORT MXC_GPIO0 -#define LED_PIN MXC_GPIO_PIN_29 -#define LED_VDDIO MXC_GPIO_VSSEL_VDDIOH -#define LED_STATE_ON 0 - -// Button -#define BUTTON_PORT MXC_GPIO1 -#define BUTTON_PIN MXC_GPIO_PIN_10 -#define BUTTON_PULL MXC_GPIO_PAD_PULL_UP -#define BUTTON_STATE_ACTIVE 0 - -// UART Enable for UART on SWD. Pin Mux handled by the HAL -#define UART_NUM 1 -#define UART_MAP MAP_B - -#ifdef __cplusplus -} -#endif - -#endif /* BOARD_H_ */ diff --git a/hw/bsp/max32666/boards/max32666fthr/board.mk b/hw/bsp/max32666/boards/max32666fthr/board.mk deleted file mode 100644 index a813a5327..000000000 --- a/hw/bsp/max32666/boards/max32666fthr/board.mk +++ /dev/null @@ -1 +0,0 @@ -# No specific build requirements for the board. diff --git a/hw/bsp/max32666/family.c b/hw/bsp/max32666/family.c deleted file mode 100644 index 05306c6c9..000000000 --- a/hw/bsp/max32666/family.c +++ /dev/null @@ -1,177 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2024 Brent Kowal (Analog Devices, Inc) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -/* metadata: - manufacturer: Analog Devices -*/ - -#ifdef __GNUC__ -#pragma GCC diagnostic push -#pragma GCC diagnostic ignored "-Wstrict-prototypes" // _mxc_crit_get_state() -#endif - -#include "gpio.h" -#include "mxc_sys.h" -#include "mcr_regs.h" -#include "mxc_device.h" -#include "uart.h" - -#ifdef __GNUC__ -#pragma GCC diagnostic pop -#endif - -#include "board.h" -#include "bsp/board_api.h" - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ -void USB_IRQHandler(void) { - tud_int_handler(0); -} - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM -//--------------------------------------------------------------------+ -mxc_uart_regs_t *ConsoleUart = MXC_UART_GET_UART(UART_NUM); - -void board_init(void) { -#if CFG_TUSB_OS == OPT_OS_NONE - // 1ms tick timer - SysTick_Config(SystemCoreClock / 1000); -#elif CFG_TUSB_OS == OPT_OS_FREERTOS - // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) - NVIC_SetPriority(USB_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); -#endif - mxc_gpio_cfg_t gpioConfig; - - // LED - gpioConfig.drvstr = MXC_GPIO_DRVSTR_0; - gpioConfig.func = MXC_GPIO_FUNC_OUT; - gpioConfig.mask = LED_PIN; - gpioConfig.pad = MXC_GPIO_PAD_NONE; - gpioConfig.port = LED_PORT; - gpioConfig.vssel = LED_VDDIO; - MXC_GPIO_Config(&gpioConfig); - board_led_write(false); - - // Button - gpioConfig.drvstr = MXC_GPIO_DRVSTR_0; - gpioConfig.func = MXC_GPIO_FUNC_IN; - gpioConfig.mask = BUTTON_PIN; - gpioConfig.pad = BUTTON_PULL; - gpioConfig.port = BUTTON_PORT; - gpioConfig.vssel = MXC_GPIO_VSSEL_VDDIO; - MXC_GPIO_Config(&gpioConfig); - - // UART - MXC_UART_Init(ConsoleUart, CFG_BOARD_UART_BAUDRATE, UART_MAP); - - //USB - // Startup the HIRC96M clock if it's not on already - if (!(MXC_GCR->clkcn & MXC_F_GCR_CLKCN_HIRC96M_EN)) { - MXC_GCR->clkcn |= MXC_F_GCR_CLKCN_HIRC96M_EN; - } - - MXC_SYS_ClockEnable(MXC_SYS_PERIPH_CLOCK_USB); - MXC_SYS_Reset_Periph(MXC_SYS_RESET_USB); -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) { -#if LED_STATE_ON - state = !state; -#endif - if (state) { - MXC_GPIO_OutClr(LED_PORT, LED_PIN); - } else { - MXC_GPIO_OutSet(LED_PORT, LED_PIN); - } -} - -uint32_t board_button_read(void) { - uint32_t state = MXC_GPIO_InGet(BUTTON_PORT, BUTTON_PIN) ? 1 : 0; - return BUTTON_STATE_ACTIVE == state; -} - -size_t board_get_unique_id(uint8_t id[], size_t max_len) { - uint8_t hw_id[MXC_SYS_USN_CHECKSUM_LEN];//USN Buffer - /* All other 2nd parameter is optional checksum buffer */ - MXC_SYS_GetUSN(hw_id, NULL); - - size_t act_len = TU_MIN(max_len, MXC_SYS_USN_LEN); - memcpy(id, hw_id, act_len); - return act_len; -} - -int board_uart_read(uint8_t *buf, int len) { - int uart_val; - int act_len = 0; - - while (act_len < len) { - if ((uart_val = MXC_UART_ReadCharacterRaw(ConsoleUart)) == E_UNDERFLOW) { - break; - } else { - *buf++ = (uint8_t) uart_val; - act_len++; - } - } - return act_len; -} - -int board_uart_write(void const *buf, int len) { - int act_len = 0; - const uint8_t *ch_ptr = (const uint8_t *) buf; - while (act_len < len) { - MXC_UART_WriteCharacter(ConsoleUart, *ch_ptr++); - act_len++; - } - return len; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; - -void SysTick_Handler(void) { - system_ticks++; -} - -uint32_t board_millis(void) { - return system_ticks; -} -#endif - -void HardFault_Handler(void) { - __asm("BKPT #0\n"); -} - -// Required by __libc_init_array in startup code if we are compiling using -// -nostdlib/-nostartfiles. -void _init(void) { -} diff --git a/hw/bsp/max32666/family.cmake b/hw/bsp/max32666/family.cmake deleted file mode 100644 index 49798729a..000000000 --- a/hw/bsp/max32666/family.cmake +++ /dev/null @@ -1,147 +0,0 @@ -include_guard() - -set(MAX32_PERIPH ${TOP}/hw/mcu/analog/max32/Libraries/PeriphDrivers) -set(MAX32_CMSIS ${TOP}/hw/mcu/analog/max32/Libraries/CMSIS) -set(CMSIS_5 ${TOP}/lib/CMSIS_5) - -# include board specific -include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) - -# Get the linker file from current location (family) -set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/max32666.ld) -set(LD_FILE_Clang ${LD_FILE_GNU}) - -# toolchain set up -set(CMAKE_SYSTEM_CPU cortex-m4 CACHE INTERNAL "System Processor") -set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) -set(JLINK_DEVICE max32666) -set(OPENOCD_OPTION "-f interface/cmsis-dap.cfg -f target/max32665.cfg") - -set(FAMILY_MCUS MAX32666 CACHE INTERNAL "") - -function(update_board TARGET) - target_compile_definitions(${TARGET} PUBLIC - TARGET=MAX32665 - TARGET_REV=0x4131 - MXC_ASSERT_ENABLE - MAX32665 - IAR_PRAGMAS=0 - CFG_TUSB_MCU=OPT_MCU_MAX32666 - BOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED - ) -endfunction() - -#------------------------------------ -# BOARD_TARGET -#------------------------------------ -# only need to be built ONCE for all examples -function(add_board_target BOARD_TARGET) - if (TARGET ${BOARD_TARGET}) - return() - endif () - - # Startup & Linker script - set(STARTUP_FILE_GNU ${MAX32_CMSIS}/Device/Maxim/MAX32665/Source/GCC/startup_max32665.S) - set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) - - set(PERIPH_SRC ${MAX32_PERIPH}/Source) - add_library(${BOARD_TARGET} STATIC - ${MAX32_CMSIS}/Device/Maxim/MAX32665/Source/heap.c - ${MAX32_CMSIS}/Device/Maxim/MAX32665/Source/system_max32665.c - ${PERIPH_SRC}/SYS/mxc_assert.c - ${PERIPH_SRC}/SYS/mxc_delay.c - ${PERIPH_SRC}/SYS/mxc_lock.c - ${PERIPH_SRC}/SYS/nvic_table.c - ${PERIPH_SRC}/SYS/pins_me14.c - ${PERIPH_SRC}/SYS/sys_me14.c - ${PERIPH_SRC}/TPU/tpu_me14.c - ${PERIPH_SRC}/TPU/tpu_reva.c - ${PERIPH_SRC}/FLC/flc_common.c - ${PERIPH_SRC}/FLC/flc_me14.c - ${PERIPH_SRC}/FLC/flc_reva.c - ${PERIPH_SRC}/GPIO/gpio_common.c - ${PERIPH_SRC}/GPIO/gpio_me14.c - ${PERIPH_SRC}/GPIO/gpio_reva.c - ${PERIPH_SRC}/ICC/icc_me14.c - ${PERIPH_SRC}/ICC/icc_reva.c - ${PERIPH_SRC}/UART/uart_common.c - ${PERIPH_SRC}/UART/uart_me14.c - ${PERIPH_SRC}/UART/uart_reva.c - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} - ) - target_include_directories(${BOARD_TARGET} PUBLIC - ${CMAKE_CURRENT_FUNCTION_LIST_DIR} - ${MAX32_CMSIS}/Include - ${MAX32_CMSIS}/Device/Maxim/MAX32665/Include - ${MAX32_PERIPH}/Include/MAX32665 - ${PERIPH_SRC}/SYS - ${PERIPH_SRC}/GPIO - ${PERIPH_SRC}/TPU - ${PERIPH_SRC}/ICC - ${PERIPH_SRC}/FLC - ${PERIPH_SRC}/UART - ) - - target_compile_options(${BOARD_TARGET} PRIVATE - -Wno-error=strict-prototypes - ) - update_board(${BOARD_TARGET}) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - -nostartfiles - --specs=nosys.specs --specs=nano.specs - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_Clang}" - ) - endif () -endfunction() - - -#------------------------------------ -# Functions -#------------------------------------ -function(family_configure_example TARGET RTOS) - family_configure_common(${TARGET} ${RTOS}) - - # Board target - add_board_target(board_${BOARD}) - - #---------- Port Specific ---------- - # These files are built for each example since it depends on example's tusb_config.h - target_sources(${TARGET} PUBLIC - # BSP - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c - ) - target_include_directories(${TARGET} PUBLIC - # family, hw, board - ${CMAKE_CURRENT_FUNCTION_LIST_DIR} - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} - ) - - # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_MAX32666) - target_sources(${TARGET} PUBLIC - ${TOP}/src/portable/mentor/musb/dcd_musb.c - ) - target_compile_options(${TARGET} PRIVATE - -Wno-error=strict-prototypes - ) - - target_link_libraries(${TARGET} PUBLIC board_${BOARD}) - target_compile_options(${TARGET} PRIVATE - -Wno-error=strict-prototypes - ) - - - - # Flashing - family_add_bin_hex(${TARGET}) - family_flash_jlink(${TARGET}) - family_flash_openocd_adi(${TARGET}) -endfunction() diff --git a/hw/bsp/max32666/family.mk b/hw/bsp/max32666/family.mk deleted file mode 100644 index b4f7d1e57..000000000 --- a/hw/bsp/max32666/family.mk +++ /dev/null @@ -1,93 +0,0 @@ -DEPS_SUBMODULES += lib/CMSIS_5 hw/mcu/analog/max32 - -# Important locations in the hw support for MCU -MAX32_CMSIS = hw/mcu/analog/max32/Libraries/CMSIS -MAX32_PERIPH = hw/mcu/analog/max32/Libraries/PeriphDrivers - -# Add any board specific make rules -include $(TOP)/$(BOARD_PATH)/board.mk - -CPU_CORE ?= cortex-m4 -PORT ?= 0 - -# GCC -SRC_S_GCC += $(MAX32_CMSIS)/Device/Maxim/MAX32665/Source/GCC/startup_max32665.S -LD_FILE = $(FAMILY_PATH)/max32666.ld - -# -------------- -# Compiler Flags -# -------------- -# Flags for the MAX32665/6 SDK -CFLAGS += -DTARGET=MAX32665 \ - -DTARGET_REV=0x4131 \ - -DMXC_ASSERT_ENABLE \ - -DMAX32665 \ - -DIAR_PRAGMAS=0 - -# Flags for TUSB features -CFLAGS += \ - -DCFG_TUSB_MCU=OPT_MCU_MAX32666 \ - -DBOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED - -# mcu driver cause following warnings -CFLAGS += -Wno-error=strict-prototypes \ - -Wno-error=unused-parameter \ - -Wno-error=cast-align \ - -Wno-error=cast-qual -LDFLAGS_GCC += -nostartfiles --specs=nosys.specs --specs=nano.specs - -# For flash-jlink target -JLINK_DEVICE = max32666 - -# flash target using Jlink by default -flash: flash-jlink - -# Optional flash option when running within an installed MSDK to use OpenOCD -# Mainline OpenOCD does not yet have the MAX32's flash algorithm integrated. -# If the MSDK is installed, flash-msdk can be run to utilize the the modified -# openocd with the algorithms -MAXIM_PATH := $(subst \,/,$(MAXIM_PATH)) -flash-msdk: $(BUILD)/$(PROJECT).elf - $(MAXIM_PATH)/Tools/OpenOCD/openocd -s $(MAXIM_PATH)/Tools/OpenOCD/scripts \ - -f interface/cmsis-dap.cfg -f target/max32665.cfg \ - -c "program $(BUILD)/$(PROJECT).elf verify; init; reset; exit" - -# ----------------- -# Sources & Include -# ----------------- -PERIPH_SRC = $(TOP)/$(MAX32_PERIPH)/Source -SRC_C += \ - src/portable/mentor/musb/dcd_musb.c \ - $(MAX32_CMSIS)/Device/Maxim/MAX32665/Source/heap.c \ - $(MAX32_CMSIS)/Device/Maxim/MAX32665/Source/system_max32665.c \ - $(PERIPH_SRC)/SYS/mxc_assert.c \ - $(PERIPH_SRC)/SYS/mxc_delay.c \ - $(PERIPH_SRC)/SYS/mxc_lock.c \ - $(PERIPH_SRC)/SYS/nvic_table.c \ - $(PERIPH_SRC)/SYS/pins_me14.c \ - $(PERIPH_SRC)/SYS/sys_me14.c \ - $(PERIPH_SRC)/FLC/flc_common.c \ - $(PERIPH_SRC)/FLC/flc_me14.c \ - $(PERIPH_SRC)/FLC/flc_reva.c \ - $(PERIPH_SRC)/GPIO/gpio_common.c \ - $(PERIPH_SRC)/GPIO/gpio_me14.c \ - $(PERIPH_SRC)/GPIO/gpio_reva.c \ - $(PERIPH_SRC)/ICC/icc_me14.c \ - $(PERIPH_SRC)/ICC/icc_reva.c \ - $(PERIPH_SRC)/TPU/tpu_me14.c \ - $(PERIPH_SRC)/TPU/tpu_reva.c \ - $(PERIPH_SRC)/UART/uart_common.c \ - $(PERIPH_SRC)/UART/uart_me14.c \ - $(PERIPH_SRC)/UART/uart_reva.c \ - -INC += \ - $(TOP)/$(BOARD_PATH) \ - $(TOP)/$(MAX32_CMSIS)/Include \ - $(TOP)/$(MAX32_CMSIS)/Device/Maxim/MAX32665/Include \ - $(TOP)/$(MAX32_PERIPH)/Include/MAX32665 \ - $(PERIPH_SRC)/SYS \ - $(PERIPH_SRC)/GPIO \ - $(PERIPH_SRC)/ICC \ - $(PERIPH_SRC)/FLC \ - $(PERIPH_SRC)/TPU \ - $(PERIPH_SRC)/UART diff --git a/hw/bsp/max32666/max32666.ld b/hw/bsp/max32666/max32666.ld deleted file mode 100644 index 06c124247..000000000 --- a/hw/bsp/max32666/max32666.ld +++ /dev/null @@ -1,135 +0,0 @@ -/* SPID and SPIX Sections here are maximum possible sizes */ -/* If used, they should be adjusted for the external Flash/RAM size */ -MEMORY { - - SPIX (rx) : ORIGIN = 0x08000000, LENGTH = 0x08000000 - FLASH (rx) : ORIGIN = 0x10000000, LENGTH = 0x00100000 - SRAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x0008C000 - SPID (rw) : ORIGIN = 0x80000000, LENGTH = 512M -} - -/* Sections Definitions */ -SECTIONS { - .text : - { - _text = .; - KEEP(*(.isr_vector)) - *(.text*) /* program code */ - *(.rodata*) /* read-only data: "const" */ - - KEEP(*(.init)) - KEEP(*(.fini)) - - /* .ctors */ - *crtbegin.o(.ctors) - *crtbegin?.o(.ctors) - *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) - *(SORT(.ctors.*)) - *(.ctors) - - /* .dtors */ - *crtbegin.o(.dtors) - *crtbegin?.o(.dtors) - *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) - *(SORT(.dtors.*)) - *(.dtors) - - /* C++ Exception handling */ - KEEP(*(.eh_frame*)) - _etext = .; - } > FLASH - - .ARM.extab : - { - *(.ARM.extab* .gnu.linkonce.armextab.*) - } > FLASH - - /* This section will keep the SPIX data until loaded into the external device */ - /* Upon initialization of SPIX (user code needs to do this) */ - .xip_section : - { - KEEP(*(.xip_section*)) - } > SPIX AT>FLASH - - __load_start_xip = LOADADDR(.xip_section); - __load_length_xip = SIZEOF(.xip_section); - - /* it's used for C++ exception handling */ - /* we need to keep this to avoid overlapping */ - .ARM.exidx : - { - __exidx_start = .; - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - __exidx_end = .; - } > FLASH - - .data : - { - _data = ALIGN(., 4); - *(vtable) - *(.data*) /*read-write initialized data: initialized global variable*/ - *(.spix_config*) /* SPIX configuration functions need to be run from SRAM */ - *(.flashprog*) /* Flash program */ - - - /* These array sections are used by __libc_init_array to call static C++ constructors */ - . = ALIGN(4); - /* preinit data */ - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP(*(.preinit_array)) - PROVIDE_HIDDEN (__preinit_array_end = .); - - . = ALIGN(4); - /* init data */ - PROVIDE_HIDDEN (__init_array_start = .); - KEEP(*(SORT(.init_array.*))) - KEEP(*(.init_array)) - PROVIDE_HIDDEN (__init_array_end = .); - - . = ALIGN(4); - /* finit data */ - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP(*(SORT(.fini_array.*))) - KEEP(*(.fini_array)) - PROVIDE_HIDDEN (__fini_array_end = .); - - _edata = ALIGN(., 4); - } > SRAM AT>FLASH - __load_data = LOADADDR(.data); - - .bss : - { - . = ALIGN(4); - _bss = .; - *(.bss*) /*read-write zero initialized data: uninitialized global variable*/ - *(COMMON) - _ebss = ALIGN(., 4); - } > SRAM - - /* Setup the stack for Core 1, it will only be used if the user code - * includes a definition of Stack_Size_Core1, which defines the space - * reserved above the main core's stack for core 1's stack */ - - __StackTop_Core1 = ORIGIN(SRAM) + LENGTH(SRAM); - __StackLimit_Core1 = DEFINED(Stack_Size_Core1) ? __StackTop_Core1 - Stack_Size_Core1 : __StackTop_Core1; - - /* Set stack top to end of RAM, and stack limit move down by Stack_Size. - * If core 1 is used, set the stack to the bottom of Core 1's stack region */ - - __StackTop = DEFINED(Stack_Size_Core1) ? __StackLimit_Core1 : ORIGIN(SRAM) + LENGTH(SRAM); - __StackLimit = __StackTop - Stack_Size; - - .heap (COPY): - { - . = ALIGN(4); - PROVIDE ( end = . ); - PROVIDE ( _end = . ); - *(.heap*) - __HeapLimit = ABSOLUTE(__StackLimit); - } > SRAM - - PROVIDE(__stack = __StackTop); - - /* Check if data + heap + stack(s) exceeds RAM limit */ - ASSERT(__StackLimit >= _ebss, "region RAM overflowed with stack") -} diff --git a/hw/bsp/max32690/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/max32690/FreeRTOSConfig/FreeRTOSConfig.h deleted file mode 100644 index e5a76af85..000000000 --- a/hw/bsp/max32690/FreeRTOSConfig/FreeRTOSConfig.h +++ /dev/null @@ -1,149 +0,0 @@ -/* - * FreeRTOS Kernel V10.0.0 - * Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining a copy of - * this software and associated documentation files (the "Software"), to deal in - * the Software without restriction, including without limitation the rights to - * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of - * the Software, and to permit persons to whom the Software is furnished to do so, - * subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in all - * copies or substantial portions of the Software. If you wish to use our Amazon - * FreeRTOS name, please do so in a fair use way that does not cause confusion. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS - * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR - * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER - * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN - * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. - * - * http://www.FreeRTOS.org - * http://aws.amazon.com/freertos - * - * 1 tab == 4 spaces! - */ - - -#ifndef FREERTOS_CONFIG_H -#define FREERTOS_CONFIG_H - -/*----------------------------------------------------------- - * Application specific definitions. - * - * These definitions should be adjusted for your particular hardware and - * application requirements. - * - * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE - * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE. - * - * See http://www.freertos.org/a00110.html. - *----------------------------------------------------------*/ - -// skip if included from IAR assembler -#ifndef __IASMARM__ - #include "mxc_device.h" -#endif - -/* Cortex M23/M33 port configuration. */ -#define configENABLE_MPU 0 -#define configENABLE_FPU 1 -#define configENABLE_TRUSTZONE 0 -#define configMINIMAL_SECURE_STACK_SIZE (1024) - -#define configUSE_PREEMPTION 1 -#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0 -#define configCPU_CLOCK_HZ SystemCoreClock -#define configTICK_RATE_HZ ( 1000 ) -#define configMAX_PRIORITIES ( 5 ) -#define configMINIMAL_STACK_SIZE ( 128 ) -#define configTOTAL_HEAP_SIZE ( configSUPPORT_DYNAMIC_ALLOCATION*4*1024 ) -#define configMAX_TASK_NAME_LEN 16 -#define configUSE_16_BIT_TICKS 0 -#define configIDLE_SHOULD_YIELD 1 -#define configUSE_MUTEXES 1 -#define configUSE_RECURSIVE_MUTEXES 1 -#define configUSE_COUNTING_SEMAPHORES 1 -#define configQUEUE_REGISTRY_SIZE 4 -#define configUSE_QUEUE_SETS 0 -#define configUSE_TIME_SLICING 0 -#define configUSE_NEWLIB_REENTRANT 0 -#define configENABLE_BACKWARD_COMPATIBILITY 1 -#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 - -#define configSUPPORT_STATIC_ALLOCATION 1 -#define configSUPPORT_DYNAMIC_ALLOCATION 0 - -/* Hook function related definitions. */ -#define configUSE_IDLE_HOOK 0 -#define configUSE_TICK_HOOK 0 -#define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning -#define configCHECK_FOR_STACK_OVERFLOW 2 -#define configCHECK_HANDLER_INSTALLATION 0 - -/* Run time and task stats gathering related definitions. */ -#define configGENERATE_RUN_TIME_STATS 0 -#define configRECORD_STACK_HIGH_ADDRESS 1 -#define configUSE_TRACE_FACILITY 1 // legacy trace -#define configUSE_STATS_FORMATTING_FUNCTIONS 0 - -/* Co-routine definitions. */ -#define configUSE_CO_ROUTINES 0 -#define configMAX_CO_ROUTINE_PRIORITIES 2 - -/* Software timer related definitions. */ -#define configUSE_TIMERS 1 -#define configTIMER_TASK_PRIORITY (configMAX_PRIORITIES-2) -#define configTIMER_QUEUE_LENGTH 32 -#define configTIMER_TASK_STACK_DEPTH configMINIMAL_STACK_SIZE - -/* Optional functions - most linkers will remove unused functions anyway. */ -#define INCLUDE_vTaskPrioritySet 0 -#define INCLUDE_uxTaskPriorityGet 0 -#define INCLUDE_vTaskDelete 0 -#define INCLUDE_vTaskSuspend 1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY -#define INCLUDE_xResumeFromISR 0 -#define INCLUDE_vTaskDelayUntil 1 -#define INCLUDE_vTaskDelay 1 -#define INCLUDE_xTaskGetSchedulerState 0 -#define INCLUDE_xTaskGetCurrentTaskHandle 1 -#define INCLUDE_uxTaskGetStackHighWaterMark 0 -#define INCLUDE_xTaskGetIdleTaskHandle 0 -#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0 -#define INCLUDE_pcTaskGetTaskName 0 -#define INCLUDE_eTaskGetState 0 -#define INCLUDE_xEventGroupSetBitFromISR 0 -#define INCLUDE_xTimerPendFunctionCall 0 - -/* FreeRTOS hooks to NVIC vectors */ -#define xPortPendSVHandler PendSV_Handler -#define xPortSysTickHandler SysTick_Handler -#define vPortSVCHandler SVC_Handler - -//--------------------------------------------------------------------+ -// Interrupt nesting behavior configuration. -//--------------------------------------------------------------------+ - -// For Cortex-M specific: __NVIC_PRIO_BITS is defined in mcu header -#define configPRIO_BITS __NVIC_PRIO_BITS - -/* The lowest interrupt priority that can be used in a call to a "set priority" function. */ -#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY ((1<-jlink` target for CMake. - -Both the Evaluation Kit and APARD boards are shipped with a CMSIS-DAP -compatible debug probe. However, at the time of writing, the necessary flashing -algorithms for OpenOCD have not yet been incorporated into the OpenOCD master -branch. To utilize the provided debug probes, please install the bundled MSDK -package which includes the appropriate OpenOCD modifications. To leverage this -OpenOCD instance, run the `flash-msdk` Makefile rule, or `-msdk` CMake -target. diff --git a/hw/bsp/max32690/boards/apard32690/board.cmake b/hw/bsp/max32690/boards/apard32690/board.cmake deleted file mode 100644 index 9dc6962eb..000000000 --- a/hw/bsp/max32690/boards/apard32690/board.cmake +++ /dev/null @@ -1 +0,0 @@ -# Nothing to be done at the board level diff --git a/hw/bsp/max32690/boards/apard32690/board.h b/hw/bsp/max32690/boards/apard32690/board.h deleted file mode 100644 index 87b9c4e88..000000000 --- a/hw/bsp/max32690/boards/apard32690/board.h +++ /dev/null @@ -1,61 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2024, Brent Kowal (Analog Devices, Inc) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -/* metadata: - name: APARD32690-SL - url: https://www.analog.com/en/resources/evaluation-hardware-and-software/evaluation-boards-kits/ad-apard32690-sl.html -*/ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#include "gpio.h" -#include "mxc_sys.h" - -#ifdef __cplusplus -extern "C" { -#endif - -// LED -#define LED_PORT MXC_GPIO2 -#define LED_PIN MXC_GPIO_PIN_1 -#define LED_VDDIO MXC_GPIO_VSSEL_VDDIOH -#define LED_STATE_ON 1 - -// Button -#define BUTTON_PORT MXC_GPIO1 -#define BUTTON_PIN MXC_GPIO_PIN_27 -#define BUTTON_PULL MXC_GPIO_PAD_NONE -#define BUTTON_STATE_ACTIVE 1 - -// UART Enable for UART on ARM SWD Connector -#define UART_NUM 0 - -#ifdef __cplusplus -} -#endif - -#endif /* BOARD_H_ */ diff --git a/hw/bsp/max32690/boards/apard32690/board.mk b/hw/bsp/max32690/boards/apard32690/board.mk deleted file mode 100644 index a813a5327..000000000 --- a/hw/bsp/max32690/boards/apard32690/board.mk +++ /dev/null @@ -1 +0,0 @@ -# No specific build requirements for the board. diff --git a/hw/bsp/max32690/boards/max32690evkit/board.cmake b/hw/bsp/max32690/boards/max32690evkit/board.cmake deleted file mode 100644 index 9dc6962eb..000000000 --- a/hw/bsp/max32690/boards/max32690evkit/board.cmake +++ /dev/null @@ -1 +0,0 @@ -# Nothing to be done at the board level diff --git a/hw/bsp/max32690/boards/max32690evkit/board.h b/hw/bsp/max32690/boards/max32690evkit/board.h deleted file mode 100644 index aa8dbb1de..000000000 --- a/hw/bsp/max32690/boards/max32690evkit/board.h +++ /dev/null @@ -1,61 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2024, Brent Kowal (Analog Devices, Inc) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -/* metadata: - name: MAX32690 EVKIT - url: https://www.analog.com/en/resources/evaluation-hardware-and-software/evaluation-boards-kits/max32690evkit.html -*/ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#include "gpio.h" -#include "mxc_sys.h" - -#ifdef __cplusplus -extern "C" { -#endif - -// LED -#define LED_PORT MXC_GPIO0 -#define LED_PIN MXC_GPIO_PIN_14 -#define LED_VDDIO MXC_GPIO_VSSEL_VDDIOH -#define LED_STATE_ON 0 - -// Button -#define BUTTON_PORT MXC_GPIO4 -#define BUTTON_PIN MXC_GPIO_PIN_0 -#define BUTTON_PULL MXC_GPIO_PAD_PULL_UP -#define BUTTON_STATE_ACTIVE 0 - -// UART Enable for EvKit's Integrated FTDI Adapter. Pin Mux handled by the HAL -#define UART_NUM 2 - -#ifdef __cplusplus -} -#endif - -#endif /* BOARD_H_ */ diff --git a/hw/bsp/max32690/boards/max32690evkit/board.mk b/hw/bsp/max32690/boards/max32690evkit/board.mk deleted file mode 100644 index a813a5327..000000000 --- a/hw/bsp/max32690/boards/max32690evkit/board.mk +++ /dev/null @@ -1 +0,0 @@ -# No specific build requirements for the board. diff --git a/hw/bsp/max32690/family.c b/hw/bsp/max32690/family.c deleted file mode 100644 index 7ba5fbef3..000000000 --- a/hw/bsp/max32690/family.c +++ /dev/null @@ -1,175 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2024 Brent Kowal (Analog Devices, Inc) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -/* metadata: - manufacturer: Analog Devices -*/ - -#ifdef __GNUC__ -#pragma GCC diagnostic push -#pragma GCC diagnostic ignored "-Wstrict-prototypes" // _mxc_crit_get_state() -#endif - -#include "gpio.h" -#include "mxc_sys.h" -#include "mcr_regs.h" -#include "mxc_device.h" -#include "uart.h" - -#ifdef __GNUC__ -#pragma GCC diagnostic pop -#endif - -#include "board.h" -#include "bsp/board_api.h" - - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ -void USB_IRQHandler(void) { - tud_int_handler(0); -} - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM -//--------------------------------------------------------------------+ -mxc_uart_regs_t *ConsoleUart = MXC_UART_GET_UART(UART_NUM); - -void board_init(void) { -#if CFG_TUSB_OS == OPT_OS_NONE - // 1ms tick timer - SysTick_Config(SystemCoreClock / 1000); -#elif CFG_TUSB_OS == OPT_OS_FREERTOS - // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) - NVIC_SetPriority(USB_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); -#endif - mxc_gpio_cfg_t gpioConfig; - - // LED - gpioConfig.drvstr = MXC_GPIO_DRVSTR_0; - gpioConfig.func = MXC_GPIO_FUNC_OUT; - gpioConfig.mask = LED_PIN; - gpioConfig.pad = MXC_GPIO_PAD_NONE; - gpioConfig.port = LED_PORT; - gpioConfig.vssel = LED_VDDIO; - MXC_GPIO_Config(&gpioConfig); - board_led_write(false); - - // Button - gpioConfig.drvstr = MXC_GPIO_DRVSTR_0; - gpioConfig.func = MXC_GPIO_FUNC_IN; - gpioConfig.mask = BUTTON_PIN; - gpioConfig.pad = BUTTON_PULL; - gpioConfig.port = BUTTON_PORT; - gpioConfig.vssel = MXC_GPIO_VSSEL_VDDIO; - MXC_GPIO_Config(&gpioConfig); - - // UART - MXC_UART_Init(ConsoleUart, CFG_BOARD_UART_BAUDRATE, MXC_UART_IBRO_CLK); - - //USB - MXC_SYS_ClockSourceEnable(MXC_SYS_CLOCK_IPO); - MXC_MCR->ldoctrl |= MXC_F_MCR_LDOCTRL_0P9EN; - MXC_SYS_ClockEnable(MXC_SYS_PERIPH_CLOCK_USB); - MXC_SYS_Reset_Periph(MXC_SYS_RESET0_USB); -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) { -#if LED_STATE_ON - state = !state; -#endif - if (state) { - MXC_GPIO_OutClr(LED_PORT, LED_PIN); - } else { - MXC_GPIO_OutSet(LED_PORT, LED_PIN); - } -} - -uint32_t board_button_read(void) { - uint32_t state = MXC_GPIO_InGet(BUTTON_PORT, BUTTON_PIN) ? 1 : 0; - return BUTTON_STATE_ACTIVE == state; -} - -size_t board_get_unique_id(uint8_t id[], size_t max_len) { - uint8_t hw_id[MXC_SYS_USN_CHECKSUM_LEN];//USN Buffer - /* All other 2nd parameter is optional checksum buffer */ - MXC_SYS_GetUSN(hw_id, NULL); - - size_t act_len = TU_MIN(max_len, MXC_SYS_USN_LEN); - memcpy(id, hw_id, act_len); - return act_len; -} - -int board_uart_read(uint8_t *buf, int len) { - int uart_val; - int act_len = 0; - - while (act_len < len) { - if ((uart_val = MXC_UART_ReadCharacterRaw(ConsoleUart)) == E_UNDERFLOW) { - break; - } else { - *buf++ = (uint8_t) uart_val; - act_len++; - } - } - return act_len; -} - -int board_uart_write(void const *buf, int len) { - int act_len = 0; - const uint8_t *ch_ptr = (const uint8_t *) buf; - while (act_len < len) { - MXC_UART_WriteCharacter(ConsoleUart, *ch_ptr++); - act_len++; - } - return len; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; - -void SysTick_Handler(void) { - system_ticks++; -} - -uint32_t board_millis(void) { - return system_ticks; -} -#endif - -void HardFault_Handler(void) { - __asm("BKPT #0\n"); -} - -// Required by __libc_init_array in startup code if we are compiling using -// -nostdlib/-nostartfiles. -void _init(void) { -} diff --git a/hw/bsp/max32690/family.cmake b/hw/bsp/max32690/family.cmake deleted file mode 100644 index 0d544d9e6..000000000 --- a/hw/bsp/max32690/family.cmake +++ /dev/null @@ -1,152 +0,0 @@ -include_guard() - -set(MAX32_PERIPH ${TOP}/hw/mcu/analog/max32/Libraries/PeriphDrivers) -set(MAX32_CMSIS ${TOP}/hw/mcu/analog/max32/Libraries/CMSIS) -set(CMSIS_5 ${TOP}/lib/CMSIS_5) - -# include board specific -include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) - -# Get the linker file from current location (family) -set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/max32690.ld) -set(LD_FILE_Clang ${LD_FILE_GNU}) - -# toolchain set up -set(CMAKE_SYSTEM_CPU cortex-m4 CACHE INTERNAL "System Processor") -set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) -set(JLINK_DEVICE max32690) -set(OPENOCD_OPTION "-f interface/cmsis-dap.cfg -f target/max32690.cfg") - -set(FAMILY_MCUS MAX32690 CACHE INTERNAL "") - -function(update_board TARGET) - target_compile_definitions(${TARGET} PUBLIC - TARGET=MAX32690 - TARGET_REV=0x4131 - MXC_ASSERT_ENABLE - MAX32690 - FLASH_ORIGIN=0x10000000 - FLASH_SIZE=0x340000 - SRAM_ORIGIN=0x20000000 - SRAM_SIZE=0x100000 - IAR_PRAGMAS=0 - CFG_TUSB_MCU=OPT_MCU_MAX32690 - BOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED - ) -endfunction() - -#------------------------------------ -# BOARD_TARGET -#------------------------------------ -# only need to be built ONCE for all examples -function(add_board_target BOARD_TARGET) - if (TARGET ${BOARD_TARGET}) - return() - endif () - - # Startup & Linker script - set(STARTUP_FILE_GNU ${MAX32_CMSIS}/Device/Maxim/MAX32690/Source/GCC/startup_max32690.S) - set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) - - set(PERIPH_SRC ${MAX32_PERIPH}/Source) - add_library(${BOARD_TARGET} STATIC - ${MAX32_CMSIS}/Device/Maxim/MAX32690/Source/heap.c - ${MAX32_CMSIS}/Device/Maxim/MAX32690/Source/system_max32690.c - ${PERIPH_SRC}/SYS/mxc_assert.c - ${PERIPH_SRC}/SYS/mxc_delay.c - ${PERIPH_SRC}/SYS/mxc_lock.c - ${PERIPH_SRC}/SYS/nvic_table.c - ${PERIPH_SRC}/SYS/pins_me18.c - ${PERIPH_SRC}/SYS/sys_me18.c - ${PERIPH_SRC}/CTB/ctb_me18.c - ${PERIPH_SRC}/CTB/ctb_reva.c - ${PERIPH_SRC}/CTB/ctb_common.c - ${PERIPH_SRC}/FLC/flc_common.c - ${PERIPH_SRC}/FLC/flc_me18.c - ${PERIPH_SRC}/FLC/flc_reva.c - ${PERIPH_SRC}/GPIO/gpio_common.c - ${PERIPH_SRC}/GPIO/gpio_me18.c - ${PERIPH_SRC}/GPIO/gpio_reva.c - ${PERIPH_SRC}/ICC/icc_me18.c - ${PERIPH_SRC}/ICC/icc_reva.c - ${PERIPH_SRC}/UART/uart_common.c - ${PERIPH_SRC}/UART/uart_me18.c - ${PERIPH_SRC}/UART/uart_revb.c - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} - ) - target_include_directories(${BOARD_TARGET} PUBLIC - ${CMAKE_CURRENT_FUNCTION_LIST_DIR} - ${MAX32_CMSIS}/Include - ${MAX32_CMSIS}/Device/Maxim/MAX32690/Include - ${MAX32_PERIPH}/Include/MAX32690 - ${PERIPH_SRC}/SYS - ${PERIPH_SRC}/GPIO - ${PERIPH_SRC}/CTB - ${PERIPH_SRC}/ICC - ${PERIPH_SRC}/FLC - ${PERIPH_SRC}/UART - ) - - target_compile_options(${BOARD_TARGET} PRIVATE - -Wno-error=strict-prototypes - ) - update_board(${BOARD_TARGET}) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - -nostartfiles - --specs=nosys.specs --specs=nano.specs - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_Clang}" - ) - endif () -endfunction() - - -#------------------------------------ -# Functions -#------------------------------------ -function(family_configure_example TARGET RTOS) - family_configure_common(${TARGET} ${RTOS}) - - # Board target - add_board_target(board_${BOARD}) - - #---------- Port Specific ---------- - # These files are built for each example since it depends on example's tusb_config.h - target_sources(${TARGET} PUBLIC - # BSP - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c - ) - target_include_directories(${TARGET} PUBLIC - # family, hw, board - ${CMAKE_CURRENT_FUNCTION_LIST_DIR} - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} - ) - - # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_MAX32690) - target_sources(${TARGET} PUBLIC - ${TOP}/src/portable/mentor/musb/dcd_musb.c - ) - target_compile_options(${TARGET} PRIVATE - -Wno-error=strict-prototypes - ) - - target_link_libraries(${TARGET} PUBLIC board_${BOARD}) - target_compile_options(${TARGET} PRIVATE - -Wno-error=strict-prototypes - ) - - - - # Flashing - family_add_bin_hex(${TARGET}) - family_flash_jlink(${TARGET}) - family_flash_openocd_adi(${TARGET}) -endfunction() diff --git a/hw/bsp/max32690/family.mk b/hw/bsp/max32690/family.mk deleted file mode 100644 index d4df8ef2f..000000000 --- a/hw/bsp/max32690/family.mk +++ /dev/null @@ -1,101 +0,0 @@ -DEPS_SUBMODULES += lib/CMSIS_5 hw/mcu/analog/max32 - -# Important locations in the hw support for MCU -MAX32_CMSIS = hw/mcu/analog/max32/Libraries/CMSIS -MAX32_PERIPH = hw/mcu/analog/max32/Libraries/PeriphDrivers - -# Add any board specific make rules -include $(TOP)/$(BOARD_PATH)/board.mk - -CPU_CORE ?= cortex-m4 -PORT ?= 0 - -# GCC -SRC_S_GCC += $(MAX32_CMSIS)/Device/Maxim/MAX32690/Source/GCC/startup_max32690.S -LD_FILE = $(FAMILY_PATH)/max32690.ld - -# -------------- -# Compiler Flags -# -------------- -# Flags for the MAX32690 SDK -CFLAGS += -DTARGET=MAX32690 \ - -DTARGET_REV=0x4131 \ - -DMXC_ASSERT_ENABLE \ - -DMAX32690 \ - -DFLASH_ORIGIN=0x10000000 \ - -DFLASH_SIZE=0x340000 \ - -DSRAM_ORIGIN=0x20000000 \ - -DSRAM_SIZE=0x100000 \ - -DIAR_PRAGMAS=0 - -# Flags for TUSB features -CFLAGS += \ - -DCFG_TUSB_MCU=OPT_MCU_MAX32690 \ - -DBOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED - -# mcu driver cause following warnings -CFLAGS += -Wno-error=unused-parameter \ - -Wno-error=strict-prototypes \ - -Wno-error=old-style-declaration \ - -Wno-error=sign-compare \ - -Wno-error=cast-qual \ - -Wno-lto-type-mismatch - -LDFLAGS_GCC += -nostartfiles --specs=nosys.specs --specs=nano.specs - -# For flash-jlink target -JLINK_DEVICE = max32690 - -# flash target using Jlink by default -flash: flash-jlink - -# Optional flash option when running within an installed MSDK to use OpenOCD -# Mainline OpenOCD does not yet have the MAX32's flash algorithm integrated. -# If the MSDK is installed, flash-msdk can be run to utilize the the modified -# openocd with the algorithms -MAXIM_PATH := $(subst \,/,$(MAXIM_PATH)) -flash-msdk: $(BUILD)/$(PROJECT).elf - $(MAXIM_PATH)/Tools/OpenOCD/openocd -s $(MAXIM_PATH)/Tools/OpenOCD/scripts \ - -f interface/cmsis-dap.cfg -f target/max32690.cfg \ - -c "program $(BUILD)/$(PROJECT).elf verify; init; reset; exit" - -# ----------------- -# Sources & Include -# ----------------- -PERIPH_SRC = $(TOP)/$(MAX32_PERIPH)/Source -SRC_C += \ - src/portable/mentor/musb/dcd_musb.c \ - $(MAX32_CMSIS)/Device/Maxim/MAX32690/Source/heap.c \ - $(MAX32_CMSIS)/Device/Maxim/MAX32690/Source/system_max32690.c \ - $(PERIPH_SRC)/SYS/mxc_assert.c \ - $(PERIPH_SRC)/SYS/mxc_delay.c \ - $(PERIPH_SRC)/SYS/mxc_lock.c \ - $(PERIPH_SRC)/SYS/nvic_table.c \ - $(PERIPH_SRC)/SYS/pins_me18.c \ - $(PERIPH_SRC)/SYS/sys_me18.c \ - $(PERIPH_SRC)/CTB/ctb_me18.c \ - $(PERIPH_SRC)/CTB/ctb_reva.c \ - $(PERIPH_SRC)/CTB/ctb_common.c \ - $(PERIPH_SRC)/FLC/flc_common.c \ - $(PERIPH_SRC)/FLC/flc_me18.c \ - $(PERIPH_SRC)/FLC/flc_reva.c \ - $(PERIPH_SRC)/GPIO/gpio_common.c \ - $(PERIPH_SRC)/GPIO/gpio_me18.c \ - $(PERIPH_SRC)/GPIO/gpio_reva.c \ - $(PERIPH_SRC)/ICC/icc_me18.c \ - $(PERIPH_SRC)/ICC/icc_reva.c \ - $(PERIPH_SRC)/UART/uart_common.c \ - $(PERIPH_SRC)/UART/uart_me18.c \ - $(PERIPH_SRC)/UART/uart_revb.c \ - -INC += \ - $(TOP)/$(BOARD_PATH) \ - $(TOP)/$(MAX32_CMSIS)/Include \ - $(TOP)/$(MAX32_CMSIS)/Device/Maxim/MAX32690/Include \ - $(TOP)/$(MAX32_PERIPH)/Include/MAX32690 \ - $(PERIPH_SRC)/SYS \ - $(PERIPH_SRC)/GPIO \ - $(PERIPH_SRC)/CTB \ - $(PERIPH_SRC)/ICC \ - $(PERIPH_SRC)/FLC \ - $(PERIPH_SRC)/UART diff --git a/hw/bsp/max32690/max32690.ld b/hw/bsp/max32690/max32690.ld deleted file mode 100644 index 64b906a54..000000000 --- a/hw/bsp/max32690/max32690.ld +++ /dev/null @@ -1,164 +0,0 @@ -MEMORY { - ROM (rx) : ORIGIN = 0x00000000, LENGTH = 0x00020000 /* 128kB ROM */ - FLASH (rx) : ORIGIN = 0x10000000, LENGTH = 0x00340000 - SRAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00100000 - - /* - * Note that CS0/CS1 address mappings may be reversed using MXC_HPC->mbr0 and ->mbr1 - * The following mappings are selected for simplicity - */ - HPB_CS0 (rwx) : ORIGIN = 0x60000000, LENGTH = 0x10000000 /* External Hyperbus/Xccelabus chip select 0 */ - HPB_CS1 (rwx) : ORIGIN = 0x70000000, LENGTH = 0x10000000 /* External Hyperbus/Xccelabus chip select 1 */ -} - -SECTIONS { - .rom : - { - KEEP(*(.rom_vector)) - *(.rom_handlers*) - } > ROM - - .text : - { - _text = .; - KEEP(*(.isr_vector)) - EXCLUDE_FILE (*riscv.o) *(.text*) /* program code, exclude RISCV code */ - *(.rodata*) /* read-only data: "const" */ - - KEEP(*(.init)) - KEEP(*(.fini)) - - /* .ctors */ - *crtbegin.o(.ctors) - *crtbegin?.o(.ctors) - *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) - *(SORT(.ctors.*)) - *(.ctors) - - /* .dtors */ - *crtbegin.o(.dtors) - *crtbegin?.o(.dtors) - *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) - *(SORT(.dtors.*)) - *(.dtors) - - /* C++ Exception handling */ - KEEP(*(.eh_frame*)) - _etext = .; - } > FLASH - - .ARM.extab : - { - *(.ARM.extab* .gnu.linkonce.armextab.*) - } > FLASH - - /* These sections allow code to be compiled/linked for HPB addresses, but reside in - * flash until copied by code to the external HPB flash device - */ - .hpb_cs0_section : - { - __hpb_cs0_start = ABSOLUTE(.); - KEEP(*(.hpb_cs0_section*)) - } > HPB_CS0 AT>FLASH - - __load_start_hpb_cs0 = LOADADDR(.hpb_cs0_section); - __load_length_hpb_cs0 = SIZEOF(.hpb_cs0_section); - - .hpb_cs1_section : - { - __hpb_cs1_start = ABSOLUTE(.); - KEEP(*(.hpb_cs1_section*)) - } > HPB_CS1 AT>FLASH - - __load_start_hpb_cs1 = LOADADDR(.hpb_cs1_section); - __load_length_hpb_cs1 = SIZEOF(.hpb_cs1_section); - - /* Binary import */ - .bin_storage : - { - FILL(0xFF) - _bin_start_ = .; - KEEP(*(.bin_storage_img)) - _bin_end_ = .; - . = ALIGN(4); - } > FLASH - - /* it's used for C++ exception handling */ - /* we need to keep this to avoid overlapping */ - .ARM.exidx : - { - __exidx_start = .; - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - __exidx_end = .; - } > FLASH - - .data : - { - _data = ALIGN(., 4); - *(vtable) - *(.data*) /*read-write initialized data: initialized global variable*/ - - /* These array sections are used by __libc_init_array to call static C++ constructors */ - . = ALIGN(4); - /* preinit data */ - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP(*(.preinit_array)) - PROVIDE_HIDDEN (__preinit_array_end = .); - - . = ALIGN(4); - /* init data */ - PROVIDE_HIDDEN (__init_array_start = .); - KEEP(*(SORT(.init_array.*))) - KEEP(*(.init_array)) - PROVIDE_HIDDEN (__init_array_end = .); - - . = ALIGN(4); - /* finit data */ - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP(*(SORT(.fini_array.*))) - KEEP(*(.fini_array)) - PROVIDE_HIDDEN (__fini_array_end = .); - - /* Run the flash programming functions from SRAM */ - *(.flashprog) - - _edata = ALIGN(., 4); - } > SRAM AT>FLASH - __load_data = LOADADDR(.data); - - .bss : - { - . = ALIGN(4); - _bss = .; - *(.bss*) /*read-write zero initialized data: uninitialized global variable*/ - *(COMMON) - _ebss = ALIGN(., 4); - } > SRAM - - /* Set stack top to end of RAM, and stack limit move down by - * size of stack_dummy section */ - __StackTop = ORIGIN(SRAM) + LENGTH(SRAM); - __StackLimit = __StackTop - SIZEOF(.stack_dummy); - - /* .stack_dummy section doesn't contains any symbols. It is only - * used for linker to calculate size of stack sections, and assign - * values to stack symbols later */ - .stack_dummy (COPY): - { - *(.stack*) - } > SRAM - - .heap (COPY): - { - . = ALIGN(4); - PROVIDE ( end = . ); - PROVIDE ( _end = . ); - *(.heap*) - __HeapLimit = ABSOLUTE(__StackLimit); - } > SRAM - - PROVIDE(__stack = __StackTop); - - /* Check if data + heap + stack exceeds RAM limit */ - ASSERT(__StackLimit >= _ebss, "region RAM overflowed with stack") -} diff --git a/hw/bsp/max78002/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/max78002/FreeRTOSConfig/FreeRTOSConfig.h deleted file mode 100644 index e5a76af85..000000000 --- a/hw/bsp/max78002/FreeRTOSConfig/FreeRTOSConfig.h +++ /dev/null @@ -1,149 +0,0 @@ -/* - * FreeRTOS Kernel V10.0.0 - * Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining a copy of - * this software and associated documentation files (the "Software"), to deal in - * the Software without restriction, including without limitation the rights to - * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of - * the Software, and to permit persons to whom the Software is furnished to do so, - * subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in all - * copies or substantial portions of the Software. If you wish to use our Amazon - * FreeRTOS name, please do so in a fair use way that does not cause confusion. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS - * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR - * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER - * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN - * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. - * - * http://www.FreeRTOS.org - * http://aws.amazon.com/freertos - * - * 1 tab == 4 spaces! - */ - - -#ifndef FREERTOS_CONFIG_H -#define FREERTOS_CONFIG_H - -/*----------------------------------------------------------- - * Application specific definitions. - * - * These definitions should be adjusted for your particular hardware and - * application requirements. - * - * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE - * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE. - * - * See http://www.freertos.org/a00110.html. - *----------------------------------------------------------*/ - -// skip if included from IAR assembler -#ifndef __IASMARM__ - #include "mxc_device.h" -#endif - -/* Cortex M23/M33 port configuration. */ -#define configENABLE_MPU 0 -#define configENABLE_FPU 1 -#define configENABLE_TRUSTZONE 0 -#define configMINIMAL_SECURE_STACK_SIZE (1024) - -#define configUSE_PREEMPTION 1 -#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0 -#define configCPU_CLOCK_HZ SystemCoreClock -#define configTICK_RATE_HZ ( 1000 ) -#define configMAX_PRIORITIES ( 5 ) -#define configMINIMAL_STACK_SIZE ( 128 ) -#define configTOTAL_HEAP_SIZE ( configSUPPORT_DYNAMIC_ALLOCATION*4*1024 ) -#define configMAX_TASK_NAME_LEN 16 -#define configUSE_16_BIT_TICKS 0 -#define configIDLE_SHOULD_YIELD 1 -#define configUSE_MUTEXES 1 -#define configUSE_RECURSIVE_MUTEXES 1 -#define configUSE_COUNTING_SEMAPHORES 1 -#define configQUEUE_REGISTRY_SIZE 4 -#define configUSE_QUEUE_SETS 0 -#define configUSE_TIME_SLICING 0 -#define configUSE_NEWLIB_REENTRANT 0 -#define configENABLE_BACKWARD_COMPATIBILITY 1 -#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 - -#define configSUPPORT_STATIC_ALLOCATION 1 -#define configSUPPORT_DYNAMIC_ALLOCATION 0 - -/* Hook function related definitions. */ -#define configUSE_IDLE_HOOK 0 -#define configUSE_TICK_HOOK 0 -#define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning -#define configCHECK_FOR_STACK_OVERFLOW 2 -#define configCHECK_HANDLER_INSTALLATION 0 - -/* Run time and task stats gathering related definitions. */ -#define configGENERATE_RUN_TIME_STATS 0 -#define configRECORD_STACK_HIGH_ADDRESS 1 -#define configUSE_TRACE_FACILITY 1 // legacy trace -#define configUSE_STATS_FORMATTING_FUNCTIONS 0 - -/* Co-routine definitions. */ -#define configUSE_CO_ROUTINES 0 -#define configMAX_CO_ROUTINE_PRIORITIES 2 - -/* Software timer related definitions. */ -#define configUSE_TIMERS 1 -#define configTIMER_TASK_PRIORITY (configMAX_PRIORITIES-2) -#define configTIMER_QUEUE_LENGTH 32 -#define configTIMER_TASK_STACK_DEPTH configMINIMAL_STACK_SIZE - -/* Optional functions - most linkers will remove unused functions anyway. */ -#define INCLUDE_vTaskPrioritySet 0 -#define INCLUDE_uxTaskPriorityGet 0 -#define INCLUDE_vTaskDelete 0 -#define INCLUDE_vTaskSuspend 1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY -#define INCLUDE_xResumeFromISR 0 -#define INCLUDE_vTaskDelayUntil 1 -#define INCLUDE_vTaskDelay 1 -#define INCLUDE_xTaskGetSchedulerState 0 -#define INCLUDE_xTaskGetCurrentTaskHandle 1 -#define INCLUDE_uxTaskGetStackHighWaterMark 0 -#define INCLUDE_xTaskGetIdleTaskHandle 0 -#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0 -#define INCLUDE_pcTaskGetTaskName 0 -#define INCLUDE_eTaskGetState 0 -#define INCLUDE_xEventGroupSetBitFromISR 0 -#define INCLUDE_xTimerPendFunctionCall 0 - -/* FreeRTOS hooks to NVIC vectors */ -#define xPortPendSVHandler PendSV_Handler -#define xPortSysTickHandler SysTick_Handler -#define vPortSVCHandler SVC_Handler - -//--------------------------------------------------------------------+ -// Interrupt nesting behavior configuration. -//--------------------------------------------------------------------+ - -// For Cortex-M specific: __NVIC_PRIO_BITS is defined in mcu header -#define configPRIO_BITS __NVIC_PRIO_BITS - -/* The lowest interrupt priority that can be used in a call to a "set priority" function. */ -#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY ((1<-jlink` target for CMake. - -The Evaluation Kit is shipped with a CMSIS-DAP compatible debug probe. However, -at the time of writing, the necessary flashing algorithms for OpenOCD have not -yet been incorporated into the OpenOCD master branch. To utilize the provided -debug probes, please install the bundled MSDK package which includes the -appropriate OpenOCD modifications. To leverage this OpenOCD instance, run the -`flash-msdk` Makefile rule, or `-msdk` CMake target. diff --git a/hw/bsp/max78002/boards/max78002evkit/board.cmake b/hw/bsp/max78002/boards/max78002evkit/board.cmake deleted file mode 100644 index 9dc6962eb..000000000 --- a/hw/bsp/max78002/boards/max78002evkit/board.cmake +++ /dev/null @@ -1 +0,0 @@ -# Nothing to be done at the board level diff --git a/hw/bsp/max78002/boards/max78002evkit/board.h b/hw/bsp/max78002/boards/max78002evkit/board.h deleted file mode 100644 index 85d55d7de..000000000 --- a/hw/bsp/max78002/boards/max78002evkit/board.h +++ /dev/null @@ -1,63 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2024, Brent Kowal (Analog Devices, Inc) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -/* metadata: - name: MAX78002 EVKIT - url: https://www.analog.com/en/resources/evaluation-hardware-and-software/evaluation-boards-kits/max78002evkit.html -*/ - -#ifndef BOARD_H_ -#define BOARD_H_ - -#include "gpio.h" -#include "mxc_sys.h" - -#ifdef __cplusplus -extern "C" { -#endif - -// LED -#define LED_PORT MXC_GPIO2 -#define LED_PIN MXC_GPIO_PIN_4 -#define LED_VDDIO MXC_GPIO_VSSEL_VDDIOH -#define LED_STATE_ON 1 - -// Button -#define BUTTON_PORT MXC_GPIO2 -#define BUTTON_PIN MXC_GPIO_PIN_6 -#define BUTTON_PULL MXC_GPIO_PAD_PULL_UP -#define BUTTON_STATE_ACTIVE 0 - -// UART Enable for EvKit's Integrated FTDI Adapter. Pin Mux handled by the HAL -#define UART_NUM 0 -#define UART_PORT MXC_GPIO0 -#define UART_VDDIO_BITS 0xF - -#ifdef __cplusplus -} -#endif - -#endif /* BOARD_H_ */ diff --git a/hw/bsp/max78002/boards/max78002evkit/board.mk b/hw/bsp/max78002/boards/max78002evkit/board.mk deleted file mode 100644 index a813a5327..000000000 --- a/hw/bsp/max78002/boards/max78002evkit/board.mk +++ /dev/null @@ -1 +0,0 @@ -# No specific build requirements for the board. diff --git a/hw/bsp/max78002/family.c b/hw/bsp/max78002/family.c deleted file mode 100644 index 5c23f40f9..000000000 --- a/hw/bsp/max78002/family.c +++ /dev/null @@ -1,173 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2024 Brent Kowal (Analog Devices, Inc) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -/* metadata: - manufacturer: Analog Devices -*/ - -#ifdef __GNUC__ -#pragma GCC diagnostic push -#pragma GCC diagnostic ignored "-Wstrict-prototypes" // _mxc_crit_get_state() -#endif - -#include "gpio.h" -#include "mxc_sys.h" -#include "mcr_regs.h" -#include "mxc_device.h" -#include "uart.h" - -#ifdef __GNUC__ -#pragma GCC diagnostic pop -#endif - -#include "board.h" -#include "bsp/board_api.h" - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ -void USB_IRQHandler(void) { - tud_int_handler(0); -} - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM -//--------------------------------------------------------------------+ -mxc_uart_regs_t *ConsoleUart = MXC_UART_GET_UART(UART_NUM); - -void board_init(void) { -#if CFG_TUSB_OS == OPT_OS_NONE - // 1ms tick timer - SysTick_Config(SystemCoreClock / 1000); -#elif CFG_TUSB_OS == OPT_OS_FREERTOS - // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) - NVIC_SetPriority(USB_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); -#endif - mxc_gpio_cfg_t gpioConfig; - - // LED - gpioConfig.drvstr = MXC_GPIO_DRVSTR_0; - gpioConfig.func = MXC_GPIO_FUNC_OUT; - gpioConfig.mask = LED_PIN; - gpioConfig.pad = MXC_GPIO_PAD_NONE; - gpioConfig.port = LED_PORT; - gpioConfig.vssel = LED_VDDIO; - MXC_GPIO_Config(&gpioConfig); - board_led_write(false); - - // Button - gpioConfig.drvstr = MXC_GPIO_DRVSTR_0; - gpioConfig.func = MXC_GPIO_FUNC_IN; - gpioConfig.mask = BUTTON_PIN; - gpioConfig.pad = BUTTON_PULL; - gpioConfig.port = BUTTON_PORT; - gpioConfig.vssel = MXC_GPIO_VSSEL_VDDIO; - MXC_GPIO_Config(&gpioConfig); - - // UART - MXC_UART_Init(ConsoleUart, CFG_BOARD_UART_BAUDRATE, MXC_UART_IBRO_CLK); - UART_PORT->vssel |= UART_VDDIO_BITS; //Set necessary bits to 3.3V - - //USB - MXC_MCR->ldoctrl |= MXC_F_MCR_LDOCTRL_0P9EN; - MXC_SYS_ClockEnable(MXC_SYS_PERIPH_CLOCK_USB); -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) { -#if LED_STATE_ON - state = !state; -#endif - if (state) { - MXC_GPIO_OutClr(LED_PORT, LED_PIN); - } else { - MXC_GPIO_OutSet(LED_PORT, LED_PIN); - } -} - -uint32_t board_button_read(void) { - uint32_t state = MXC_GPIO_InGet(BUTTON_PORT, BUTTON_PIN) ? 1 : 0; - return BUTTON_STATE_ACTIVE == state; -} - -size_t board_get_unique_id(uint8_t id[], size_t max_len) { - uint8_t hw_id[MXC_SYS_USN_CHECKSUM_LEN];//USN Buffer - /* All other 2nd parameter is optional checksum buffer */ - MXC_SYS_GetUSN(hw_id, NULL); - - size_t act_len = TU_MIN(max_len, MXC_SYS_USN_LEN); - memcpy(id, hw_id, act_len); - return act_len; -} - -int board_uart_read(uint8_t *buf, int len) { - int uart_val; - int act_len = 0; - - while (act_len < len) { - if ((uart_val = MXC_UART_ReadCharacterRaw(ConsoleUart)) == E_UNDERFLOW) { - break; - } else { - *buf++ = (uint8_t) uart_val; - act_len++; - } - } - return act_len; -} - -int board_uart_write(void const *buf, int len) { - int act_len = 0; - const uint8_t *ch_ptr = (const uint8_t *) buf; - while (act_len < len) { - MXC_UART_WriteCharacter(ConsoleUart, *ch_ptr++); - act_len++; - } - return len; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; - -void SysTick_Handler(void) { - system_ticks++; -} - -uint32_t board_millis(void) { - return system_ticks; -} -#endif - -void HardFault_Handler(void) { - __asm("BKPT #0\n"); -} - -// Required by __libc_init_array in startup code if we are compiling using -// -nostdlib/-nostartfiles. -void _init(void) { -} diff --git a/hw/bsp/max78002/family.cmake b/hw/bsp/max78002/family.cmake deleted file mode 100644 index ce0fcfa08..000000000 --- a/hw/bsp/max78002/family.cmake +++ /dev/null @@ -1,166 +0,0 @@ -include_guard() - -set(MAX32_PERIPH ${TOP}/hw/mcu/analog/max32/Libraries/PeriphDrivers) -set(MAX32_CMSIS ${TOP}/hw/mcu/analog/max32/Libraries/CMSIS) -set(CMSIS_5 ${TOP}/lib/CMSIS_5) - -# include board specific -include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) - -# Get the linker file from current location (family) -set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/max78002.ld) -set(LD_FILE_Clang ${LD_FILE_GNU}) - -# toolchain set up -set(CMAKE_SYSTEM_CPU cortex-m4 CACHE INTERNAL "System Processor") -set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) -set(JLINK_DEVICE max78000) - -set(FAMILY_MCUS MAX78002 CACHE INTERNAL "") - -function(update_board TARGET) - target_compile_definitions(${TARGET} PUBLIC - TARGET=MAX78002 - TARGET_REV=0x4131 - MXC_ASSERT_ENABLE - MAX78002 - IAR_PRAGMAS=0 - CFG_TUSB_MCU=OPT_MCU_MAX78002 - BOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED - ) -endfunction() - -#------------------------------------ -# BOARD_TARGET -#------------------------------------ -# only need to be built ONCE for all examples -function(add_board_target BOARD_TARGET) - if (TARGET ${BOARD_TARGET}) - return() - endif () - - # Startup & Linker script - set(STARTUP_FILE_GNU ${MAX32_CMSIS}/Device/Maxim/MAX78002/Source/GCC/startup_max78002.S) - set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) - - set(PERIPH_SRC ${MAX32_PERIPH}/Source) - add_library(${BOARD_TARGET} STATIC - ${MAX32_CMSIS}/Device/Maxim/MAX78002/Source/heap.c - ${MAX32_CMSIS}/Device/Maxim/MAX78002/Source/system_max78002.c - ${PERIPH_SRC}/SYS/mxc_assert.c - ${PERIPH_SRC}/SYS/mxc_delay.c - ${PERIPH_SRC}/SYS/mxc_lock.c - ${PERIPH_SRC}/SYS/nvic_table.c - ${PERIPH_SRC}/SYS/pins_ai87.c - ${PERIPH_SRC}/SYS/sys_ai87.c - ${PERIPH_SRC}/AES/aes_ai87.c - ${PERIPH_SRC}/AES/aes_revb.c - ${PERIPH_SRC}/FLC/flc_common.c - ${PERIPH_SRC}/FLC/flc_ai87.c - ${PERIPH_SRC}/FLC/flc_reva.c - ${PERIPH_SRC}/GPIO/gpio_common.c - ${PERIPH_SRC}/GPIO/gpio_ai87.c - ${PERIPH_SRC}/GPIO/gpio_reva.c - ${PERIPH_SRC}/ICC/icc_ai87.c - ${PERIPH_SRC}/ICC/icc_reva.c - ${PERIPH_SRC}/TRNG/trng_ai87.c - ${PERIPH_SRC}/TRNG/trng_revb.c - ${PERIPH_SRC}/UART/uart_common.c - ${PERIPH_SRC}/UART/uart_ai87.c - ${PERIPH_SRC}/UART/uart_revb.c - ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} - ) - target_include_directories(${BOARD_TARGET} PUBLIC - ${CMAKE_CURRENT_FUNCTION_LIST_DIR} - ${MAX32_CMSIS}/Include - ${MAX32_CMSIS}/Device/Maxim/MAX78002/Include - ${MAX32_PERIPH}/Include/MAX78002 - ${PERIPH_SRC}/SYS - ${PERIPH_SRC}/GPIO - ${PERIPH_SRC}/AES - ${PERIPH_SRC}/TRNG - ${PERIPH_SRC}/ICC - ${PERIPH_SRC}/FLC - ${PERIPH_SRC}/UART - ) - - target_compile_options(${BOARD_TARGET} PRIVATE - -Wno-error=strict-prototypes - -Wno-error=redundant-decls - ) - update_board(${BOARD_TARGET}) - - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_GNU}" - -nostartfiles - --specs=nosys.specs --specs=nano.specs - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") - target_link_options(${BOARD_TARGET} PUBLIC - "LINKER:--script=${LD_FILE_Clang}" - ) - endif () -endfunction() - - -#------------------------------------ -# Functions -#------------------------------------ -function(family_configure_example TARGET RTOS) - family_configure_common(${TARGET} ${RTOS}) - - # Board target - add_board_target(board_${BOARD}) - - #---------- Port Specific ---------- - # These files are built for each example since it depends on example's tusb_config.h - target_sources(${TARGET} PUBLIC - # BSP - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c - ) - target_include_directories(${TARGET} PUBLIC - # family, hw, board - ${CMAKE_CURRENT_FUNCTION_LIST_DIR} - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} - ) - - target_compile_options(${TARGET} PRIVATE - -Wno-error=strict-prototypes - -Wno-error=redundant-decls - ) - - - # Add TinyUSB target and port source - family_add_tinyusb(${TARGET} OPT_MCU_MAX78002) - target_sources(${TARGET} PUBLIC - ${TOP}/src/portable/mentor/musb/dcd_musb.c - ) - target_link_libraries(${TARGET} PUBLIC board_${BOARD}) - target_compile_options(${TARGET} PRIVATE - -Wno-error=strict-prototypes - -Wno-error=redundant-decls - ) - - - - # Flashing - family_add_bin_hex(${TARGET}) - family_flash_jlink(${TARGET}) - family_flash_msdk(${TARGET}) -endfunction() - -# Add flash msdk target -function(family_flash_msdk TARGET) - set(MAXIM_PATH "$ENV{MAXIM_PATH}") - - add_custom_target(${TARGET}-msdk - DEPENDS ${TARGET} - COMMAND ${MAXIM_PATH}/Tools/OpenOCD/openocd -s ${MAXIM_PATH}/Tools/OpenOCD/scripts - -f interface/cmsis-dap.cfg -f target/max78002.cfg - -c "program $ verify; init; reset; exit" - VERBATIM - ) -endfunction() diff --git a/hw/bsp/max78002/family.mk b/hw/bsp/max78002/family.mk deleted file mode 100644 index 997816261..000000000 --- a/hw/bsp/max78002/family.mk +++ /dev/null @@ -1,99 +0,0 @@ -DEPS_SUBMODULES += lib/CMSIS_5 hw/mcu/analog/max32 - -# Important locations in the hw support for MCU -MAX32_CMSIS = hw/mcu/analog/max32/Libraries/CMSIS -MAX32_PERIPH = hw/mcu/analog/max32/Libraries/PeriphDrivers - -# Add any board specific make rules -include $(TOP)/$(BOARD_PATH)/board.mk - -CPU_CORE ?= cortex-m4 -PORT ?= 0 - -# GCC -SRC_S_GCC += $(MAX32_CMSIS)/Device/Maxim/MAX78002/Source/GCC/startup_max78002.S -LD_FILE = $(FAMILY_PATH)/max78002.ld - -# -------------- -# Compiler Flags -# -------------- -# Flags for the MAX78002 SDK -CFLAGS += -DTARGET=MAX78002 \ - -DTARGET_REV=0x4131 \ - -DMXC_ASSERT_ENABLE \ - -DMAX78002 \ - -DIAR_PRAGMAS=0 - -# Flags for TUSB features -CFLAGS += \ - -DCFG_TUSB_MCU=OPT_MCU_MAX78002 \ - -DBOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED - -# mcu driver cause following warnings -CFLAGS += -Wno-error=redundant-decls \ - -Wno-error=strict-prototypes \ - -Wno-error=unused-parameter \ - -Wno-error=enum-conversion \ - -Wno-error=sign-compare \ - -Wno-error=cast-qual - -LDFLAGS_GCC += -nostartfiles --specs=nosys.specs --specs=nano.specs - -# For flash-jlink target -JLINK_DEVICE = max78000 - -# flash target using Jlink by default -flash: flash-jlink - -# Optional flash option when running within an installed MSDK to use OpenOCD -# Mainline OpenOCD does not yet have the MAX32's flash algorithm integrated. -# If the MSDK is installed, flash-msdk can be run to utilize the the modified -# openocd with the algorithms -MAXIM_PATH := $(subst \,/,$(MAXIM_PATH)) -flash-msdk: $(BUILD)/$(PROJECT).elf - $(MAXIM_PATH)/Tools/OpenOCD/openocd -s $(MAXIM_PATH)/Tools/OpenOCD/scripts \ - -f interface/cmsis-dap.cfg -f target/max78002.cfg \ - -c "program $(BUILD)/$(PROJECT).elf verify; init; reset; exit" - -# ----------------- -# Sources & Include -# ----------------- -PERIPH_SRC = $(TOP)/$(MAX32_PERIPH)/Source -SRC_C += \ - src/portable/mentor/musb/dcd_musb.c \ - $(MAX32_CMSIS)/Device/Maxim/MAX78002/Source/heap.c \ - $(MAX32_CMSIS)/Device/Maxim/MAX78002/Source/system_max78002.c \ - $(PERIPH_SRC)/SYS/mxc_assert.c \ - $(PERIPH_SRC)/SYS/mxc_delay.c \ - $(PERIPH_SRC)/SYS/mxc_lock.c \ - $(PERIPH_SRC)/SYS/nvic_table.c \ - $(PERIPH_SRC)/SYS/pins_ai87.c \ - $(PERIPH_SRC)/SYS/sys_ai87.c \ - $(PERIPH_SRC)/AES/aes_ai87.c \ - $(PERIPH_SRC)/AES/aes_revb.c \ - $(PERIPH_SRC)/FLC/flc_common.c \ - $(PERIPH_SRC)/FLC/flc_ai87.c \ - $(PERIPH_SRC)/FLC/flc_reva.c \ - $(PERIPH_SRC)/GPIO/gpio_common.c \ - $(PERIPH_SRC)/GPIO/gpio_ai87.c \ - $(PERIPH_SRC)/GPIO/gpio_reva.c \ - $(PERIPH_SRC)/ICC/icc_ai87.c \ - $(PERIPH_SRC)/ICC/icc_reva.c \ - $(PERIPH_SRC)/TRNG/trng_ai87.c \ - $(PERIPH_SRC)/TRNG/trng_revb.c \ - $(PERIPH_SRC)/UART/uart_common.c \ - $(PERIPH_SRC)/UART/uart_ai87.c \ - $(PERIPH_SRC)/UART/uart_revb.c \ - -INC += \ - $(TOP)/$(BOARD_PATH) \ - $(TOP)/$(MAX32_CMSIS)/Include \ - $(TOP)/$(MAX32_CMSIS)/Device/Maxim/MAX78002/Include \ - $(TOP)/$(MAX32_PERIPH)/Include/MAX78002 \ - $(PERIPH_SRC)/SYS \ - $(PERIPH_SRC)/GPIO \ - $(PERIPH_SRC)/AES \ - $(PERIPH_SRC)/ICC \ - $(PERIPH_SRC)/FLC \ - $(PERIPH_SRC)/TRNG \ - $(PERIPH_SRC)/UART diff --git a/hw/bsp/max78002/max78002.ld b/hw/bsp/max78002/max78002.ld deleted file mode 100644 index e5c4866ee..000000000 --- a/hw/bsp/max78002/max78002.ld +++ /dev/null @@ -1,182 +0,0 @@ -MEMORY { - ROM (rx) : ORIGIN = 0x00000000, LENGTH = 0x00010000 /* 64 kB ROM */ - FLASH (rx) : ORIGIN = 0x10000000, LENGTH = 0x00280000 /* 2.5 MB Flash */ - SRAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00060000 /* 384 kB SRAM */ - /*CSI2 (rwx) : ORIGIN = 0x2001F000, LENGTH = 0x00001000 4096 B CSI2 Buffer */ -} - -SECTIONS { - .rom : - { - KEEP(*(.rom_vector)) - *(.rom_handlers*) - } > ROM - - .text : - { - _text = .; - KEEP(*(.isr_vector)) - EXCLUDE_FILE (*riscv.o) *(.text*) /* Program code (exclude RISCV code) */ - *(.rodata*) /* read-only data: "const" */ - - KEEP(*(.init)) - KEEP(*(.fini)) - - /* .ctors */ - *crtbegin.o(.ctors) - *crtbegin?.o(.ctors) - *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) - *(SORT(.ctors.*)) - *(.ctors) - - /* .dtors */ - *crtbegin.o(.dtors) - *crtbegin?.o(.dtors) - *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) - *(SORT(.dtors.*)) - *(.dtors) - - /* C++ Exception handling */ - KEEP(*(.eh_frame*)) - _etext = .; - } > FLASH - - .ARM.extab : - { - *(.ARM.extab* .gnu.linkonce.armextab.*) - } > FLASH - - /* Binary import */ - .bin_storage : - { - FILL(0xFF) - _bin_start_ = .; - KEEP(*(.bin_storage_img)) - _bin_end_ = .; - . = ALIGN(4); - } > FLASH - - .rom_code : - { - . = ALIGN(16); - _sran_code = .; - *(.rom_code_section) - _esran_code = .; - } > ROM - - .flash_code : - { - . = ALIGN(16); - _sran_code = .; - *(.flash_code_section) - _esran_code = .; - } > FLASH - - .sram_code : - { - . = ALIGN(16); - _sran_code = .; - *(.sram_code_section) - _esran_code = .; - } > SRAM - - /* it's used for C++ exception handling */ - /* we need to keep this to avoid overlapping */ - .ARM.exidx : - { - __exidx_start = .; - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - __exidx_end = .; - } > FLASH - - .data : - { - _data = ALIGN(., 4); - _csi = . + 0x20000; - *(vtable) - *(.data*) /*read-write initialized data: initialized global variable*/ - - - /* These array sections are used by __libc_init_array to call static C++ constructors */ - . = ALIGN(4); - /* preinit data */ - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP(*(.preinit_array)) - PROVIDE_HIDDEN (__preinit_array_end = .); - - . = ALIGN(4); - /* init data */ - PROVIDE_HIDDEN (__init_array_start = .); - KEEP(*(SORT(.init_array.*))) - KEEP(*(.init_array)) - PROVIDE_HIDDEN (__init_array_end = .); - - . = ALIGN(4); - /* finit data */ - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP(*(SORT(.fini_array.*))) - KEEP(*(.fini_array)) - PROVIDE_HIDDEN (__fini_array_end = .); - - _edata = ALIGN(., 4); - - } > SRAM AT>FLASH - __load_data = LOADADDR(.data); - - .bss : - { - . = ALIGN(4); - _bss = .; - *(.bss*) /*read-write zero initialized data: uninitialized global variable*/ - *(COMMON) - _ebss = ALIGN(., 4); - } > SRAM - - .shared : - { - . = ALIGN(4); - _shared = .; - *(.mailbox*) - . = ALIGN(4); - *(.shared*) /*read-write zero initialized data: uninitialized global variable*/ - _eshared = ALIGN(., 4); - } > SRAM - __shared_data = LOADADDR(.shared); - - /* Set stack top to end of RAM, and stack limit move down by - * size of stack_dummy section */ - __StackTop = ORIGIN(SRAM) + LENGTH(SRAM); - __StackLimit = __StackTop - SIZEOF(.stack_dummy); - - /* .stack_dummy section doesn't contains any symbols. It is only - * used for linker to calculate size of stack sections, and assign - * values to stack symbols later */ - .stack_dummy (COPY): - { - *(.stack*) - } > SRAM - - .heap (COPY): - { - . = ALIGN(4); - PROVIDE ( end = . ); - PROVIDE ( _end = . ); - *(.heap*) - __HeapLimit = ABSOLUTE(__StackLimit); - } > SRAM - - PROVIDE(__stack = __StackTop); - - /* Check if data + heap + stack exceeds RAM limit */ - ASSERT(__StackLimit >= _ebss, "region RAM overflowed with stack") - - /* Section used by RISCV loader projects. See RISCV_LOAD documentation in the build system. */ - .riscv_flash : - { - /* Align address to mod 256 with a small offset. This is required to match the flash page size.*/ - . = ALIGN(256); /* ALIGN operatator is used here. Note that (. & 0x1FFFFF00) was used in the past, but a strange bug was seen on Windows where the & did not behave as expected.*/ - . += 0x100; - _riscv_boot = .; - KEEP(*riscv.o (.text*)) - } > FLASH -} diff --git a/hw/bsp/maxim/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/maxim/FreeRTOSConfig/FreeRTOSConfig.h new file mode 100644 index 000000000..e5a76af85 --- /dev/null +++ b/hw/bsp/maxim/FreeRTOSConfig/FreeRTOSConfig.h @@ -0,0 +1,149 @@ +/* + * FreeRTOS Kernel V10.0.0 + * Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. If you wish to use our Amazon + * FreeRTOS name, please do so in a fair use way that does not cause confusion. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://www.FreeRTOS.org + * http://aws.amazon.com/freertos + * + * 1 tab == 4 spaces! + */ + + +#ifndef FREERTOS_CONFIG_H +#define FREERTOS_CONFIG_H + +/*----------------------------------------------------------- + * Application specific definitions. + * + * These definitions should be adjusted for your particular hardware and + * application requirements. + * + * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE + * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE. + * + * See http://www.freertos.org/a00110.html. + *----------------------------------------------------------*/ + +// skip if included from IAR assembler +#ifndef __IASMARM__ + #include "mxc_device.h" +#endif + +/* Cortex M23/M33 port configuration. */ +#define configENABLE_MPU 0 +#define configENABLE_FPU 1 +#define configENABLE_TRUSTZONE 0 +#define configMINIMAL_SECURE_STACK_SIZE (1024) + +#define configUSE_PREEMPTION 1 +#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0 +#define configCPU_CLOCK_HZ SystemCoreClock +#define configTICK_RATE_HZ ( 1000 ) +#define configMAX_PRIORITIES ( 5 ) +#define configMINIMAL_STACK_SIZE ( 128 ) +#define configTOTAL_HEAP_SIZE ( configSUPPORT_DYNAMIC_ALLOCATION*4*1024 ) +#define configMAX_TASK_NAME_LEN 16 +#define configUSE_16_BIT_TICKS 0 +#define configIDLE_SHOULD_YIELD 1 +#define configUSE_MUTEXES 1 +#define configUSE_RECURSIVE_MUTEXES 1 +#define configUSE_COUNTING_SEMAPHORES 1 +#define configQUEUE_REGISTRY_SIZE 4 +#define configUSE_QUEUE_SETS 0 +#define configUSE_TIME_SLICING 0 +#define configUSE_NEWLIB_REENTRANT 0 +#define configENABLE_BACKWARD_COMPATIBILITY 1 +#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 + +#define configSUPPORT_STATIC_ALLOCATION 1 +#define configSUPPORT_DYNAMIC_ALLOCATION 0 + +/* Hook function related definitions. */ +#define configUSE_IDLE_HOOK 0 +#define configUSE_TICK_HOOK 0 +#define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning +#define configCHECK_FOR_STACK_OVERFLOW 2 +#define configCHECK_HANDLER_INSTALLATION 0 + +/* Run time and task stats gathering related definitions. */ +#define configGENERATE_RUN_TIME_STATS 0 +#define configRECORD_STACK_HIGH_ADDRESS 1 +#define configUSE_TRACE_FACILITY 1 // legacy trace +#define configUSE_STATS_FORMATTING_FUNCTIONS 0 + +/* Co-routine definitions. */ +#define configUSE_CO_ROUTINES 0 +#define configMAX_CO_ROUTINE_PRIORITIES 2 + +/* Software timer related definitions. */ +#define configUSE_TIMERS 1 +#define configTIMER_TASK_PRIORITY (configMAX_PRIORITIES-2) +#define configTIMER_QUEUE_LENGTH 32 +#define configTIMER_TASK_STACK_DEPTH configMINIMAL_STACK_SIZE + +/* Optional functions - most linkers will remove unused functions anyway. */ +#define INCLUDE_vTaskPrioritySet 0 +#define INCLUDE_uxTaskPriorityGet 0 +#define INCLUDE_vTaskDelete 0 +#define INCLUDE_vTaskSuspend 1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY +#define INCLUDE_xResumeFromISR 0 +#define INCLUDE_vTaskDelayUntil 1 +#define INCLUDE_vTaskDelay 1 +#define INCLUDE_xTaskGetSchedulerState 0 +#define INCLUDE_xTaskGetCurrentTaskHandle 1 +#define INCLUDE_uxTaskGetStackHighWaterMark 0 +#define INCLUDE_xTaskGetIdleTaskHandle 0 +#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0 +#define INCLUDE_pcTaskGetTaskName 0 +#define INCLUDE_eTaskGetState 0 +#define INCLUDE_xEventGroupSetBitFromISR 0 +#define INCLUDE_xTimerPendFunctionCall 0 + +/* FreeRTOS hooks to NVIC vectors */ +#define xPortPendSVHandler PendSV_Handler +#define xPortSysTickHandler SysTick_Handler +#define vPortSVCHandler SVC_Handler + +//--------------------------------------------------------------------+ +// Interrupt nesting behavior configuration. +//--------------------------------------------------------------------+ + +// For Cortex-M specific: __NVIC_PRIO_BITS is defined in mcu header +#define configPRIO_BITS __NVIC_PRIO_BITS + +/* The lowest interrupt priority that can be used in a call to a "set priority" function. */ +#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY ((1<-jlink` target for CMake. + +Most the Evaluation Kit and boards are shipped with a CMSIS-DAP +compatible debug probe. However, at the time of writing, the necessary flashing +algorithms for OpenOCD have not yet been incorporated into the OpenOCD master +branch. To utilize the provided debug probes, please install the bundled MSDK +package which includes the appropriate OpenOCD modifications. To leverage this +OpenOCD instance, run the `-openocd` CMake +target. diff --git a/hw/bsp/maxim/boards/apard32690/board.cmake b/hw/bsp/maxim/boards/apard32690/board.cmake new file mode 100644 index 000000000..a03d05f8d --- /dev/null +++ b/hw/bsp/maxim/boards/apard32690/board.cmake @@ -0,0 +1,4 @@ +set(MAX_DEVICE max32690) + +function(update_board TARGET) +endfunction() diff --git a/hw/bsp/maxim/boards/apard32690/board.h b/hw/bsp/maxim/boards/apard32690/board.h new file mode 100644 index 000000000..87b9c4e88 --- /dev/null +++ b/hw/bsp/maxim/boards/apard32690/board.h @@ -0,0 +1,61 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2024, Brent Kowal (Analog Devices, Inc) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +/* metadata: + name: APARD32690-SL + url: https://www.analog.com/en/resources/evaluation-hardware-and-software/evaluation-boards-kits/ad-apard32690-sl.html +*/ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#include "gpio.h" +#include "mxc_sys.h" + +#ifdef __cplusplus +extern "C" { +#endif + +// LED +#define LED_PORT MXC_GPIO2 +#define LED_PIN MXC_GPIO_PIN_1 +#define LED_VDDIO MXC_GPIO_VSSEL_VDDIOH +#define LED_STATE_ON 1 + +// Button +#define BUTTON_PORT MXC_GPIO1 +#define BUTTON_PIN MXC_GPIO_PIN_27 +#define BUTTON_PULL MXC_GPIO_PAD_NONE +#define BUTTON_STATE_ACTIVE 1 + +// UART Enable for UART on ARM SWD Connector +#define UART_NUM 0 + +#ifdef __cplusplus +} +#endif + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/maxim/boards/max32650evkit/board.cmake b/hw/bsp/maxim/boards/max32650evkit/board.cmake new file mode 100644 index 000000000..59721e756 --- /dev/null +++ b/hw/bsp/maxim/boards/max32650evkit/board.cmake @@ -0,0 +1,8 @@ +set(MAX_DEVICE max32650) + +function(update_board TARGET) +endfunction() + +function(prepare_image TARGET_IN) + #No signing required +endfunction() diff --git a/hw/bsp/maxim/boards/max32650evkit/board.h b/hw/bsp/maxim/boards/max32650evkit/board.h new file mode 100644 index 000000000..65ed2659e --- /dev/null +++ b/hw/bsp/maxim/boards/max32650evkit/board.h @@ -0,0 +1,61 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2024, Brent Kowal (Analog Devices, Inc) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +/* metadata: + name: MAX32650 EVKIT + url: https://www.analog.com/en/resources/evaluation-hardware-and-software/evaluation-boards-kits/max32650-evkit.html#eb-overview +*/ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#include "gpio.h" +#include "mxc_sys.h" + +#ifdef __cplusplus +extern "C" { +#endif + +// LED +#define LED_PORT MXC_GPIO2 +#define LED_PIN MXC_GPIO_PIN_25 +#define LED_VDDIO MXC_GPIO_VSSEL_VDDIOH +#define LED_STATE_ON 0 + +// Button +#define BUTTON_PORT MXC_GPIO2 +#define BUTTON_PIN MXC_GPIO_PIN_28 +#define BUTTON_PULL MXC_GPIO_PAD_WEAK_PULL_UP +#define BUTTON_STATE_ACTIVE 0 + +// UART Enable for EvKit's Integrated FTDI Adapter. Pin Mux handled by the HAL +#define UART_NUM 0 + +#ifdef __cplusplus +} +#endif + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/maxim/boards/max32650fthr/board.cmake b/hw/bsp/maxim/boards/max32650fthr/board.cmake new file mode 100644 index 000000000..59721e756 --- /dev/null +++ b/hw/bsp/maxim/boards/max32650fthr/board.cmake @@ -0,0 +1,8 @@ +set(MAX_DEVICE max32650) + +function(update_board TARGET) +endfunction() + +function(prepare_image TARGET_IN) + #No signing required +endfunction() diff --git a/hw/bsp/maxim/boards/max32650fthr/board.h b/hw/bsp/maxim/boards/max32650fthr/board.h new file mode 100644 index 000000000..755fa15b5 --- /dev/null +++ b/hw/bsp/maxim/boards/max32650fthr/board.h @@ -0,0 +1,62 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2024, Brent Kowal (Analog Devices, Inc) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +/* metadata: + name: MAX32650 Feather + url: https://www.analog.com/en/resources/evaluation-hardware-and-software/evaluation-boards-kits/max32650fthr.html +*/ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#include "gpio.h" +#include "mxc_sys.h" + +#ifdef __cplusplus +extern "C" { +#endif + +// LED +#define LED_PORT MXC_GPIO1 +#define LED_PIN MXC_GPIO_PIN_14 +#define LED_VDDIO MXC_GPIO_VSSEL_VDDIO +#define LED_STATE_ON 0 + +// Button +#define BUTTON_PORT MXC_GPIO1 +#define BUTTON_PIN MXC_GPIO_PIN_19 +#define BUTTON_PULL MXC_GPIO_PAD_WEAK_PULL_UP +#define BUTTON_STATE_ACTIVE 0 + +// UART Enable for SWD UART Pins. Pin Mux handled by the HAL +#define UART_NUM 0 + + +#ifdef __cplusplus +} +#endif + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/maxim/boards/max32651evkit/board.cmake b/hw/bsp/maxim/boards/max32651evkit/board.cmake new file mode 100644 index 000000000..773989126 --- /dev/null +++ b/hw/bsp/maxim/boards/max32651evkit/board.cmake @@ -0,0 +1,31 @@ +set(MAX_DEVICE max32650) + +# Use the secure linker file +set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/../../linker/max32651.ld) + +function(update_board TARGET) + # for the signed target, need to add the __SLA_FWK__ define + target_compile_definitions(${TARGET} PUBLIC + __SLA_FWK__ + ) +endfunction() + +function(sign_image TARGET_IN) + #For the signed target, set up a POST_BUILD command to sign the elf file once created + if((WIN32) OR (MINGW) OR (MSYS)) + set(SIGN_EXE "sign_app.exe") + else() + set(SIGN_EXE "sign_app") + endif() + set(MCU_PATH "${TOP}/hw/mcu/analog/msdk/") + + # Custom POST_BUILD command + add_custom_command( + TARGET ${TARGET_IN} POST_BUILD + COMMAND ${CMAKE_OBJCOPY} $ -R .sig -O binary $/${TARGET_IN}.bin + COMMAND ${MCU_PATH}/Tools/SBT/bin/${SIGN_EXE} -c MAX32651 key_file=${MCU_PATH}/Tools/SBT/devices/MAX32651/keys/maximtestcrk.key + ca=$/${TARGET_IN}.bin sca=$/${TARGET_IN}.sbin + COMMAND ${CMAKE_OBJCOPY} $ --update-section .sig=$/${TARGET_IN}.sig + VERBATIM + ) +endfunction() diff --git a/hw/bsp/maxim/boards/max32651evkit/board.h b/hw/bsp/maxim/boards/max32651evkit/board.h new file mode 100644 index 000000000..0b49ff309 --- /dev/null +++ b/hw/bsp/maxim/boards/max32651evkit/board.h @@ -0,0 +1,61 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2024, Brent Kowal (Analog Devices, Inc) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +/* metadata: + name: MAX32651 EVKIT + url: https://www.analog.com/en/resources/evaluation-hardware-and-software/evaluation-boards-kits/max32651-evkit.html +*/ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#include "gpio.h" +#include "mxc_sys.h" + +#ifdef __cplusplus +extern "C" { +#endif + +// LED +#define LED_PORT MXC_GPIO2 +#define LED_PIN MXC_GPIO_PIN_25 +#define LED_VDDIO MXC_GPIO_VSSEL_VDDIOH +#define LED_STATE_ON 0 + +// Button +#define BUTTON_PORT MXC_GPIO2 +#define BUTTON_PIN MXC_GPIO_PIN_28 +#define BUTTON_PULL MXC_GPIO_PAD_WEAK_PULL_UP +#define BUTTON_STATE_ACTIVE 0 + +// UART Enable for EvKit's Integrated FTDI Adapter. Pin Mux handled by the HAL +#define UART_NUM 0 + +#ifdef __cplusplus +} +#endif + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/maxim/boards/max32666evkit/board.cmake b/hw/bsp/maxim/boards/max32666evkit/board.cmake new file mode 100644 index 000000000..e7116b603 --- /dev/null +++ b/hw/bsp/maxim/boards/max32666evkit/board.cmake @@ -0,0 +1,4 @@ +set(MAX_DEVICE max32665) + +function(update_board TARGET) +endfunction() diff --git a/hw/bsp/maxim/boards/max32666evkit/board.h b/hw/bsp/maxim/boards/max32666evkit/board.h new file mode 100644 index 000000000..54589444d --- /dev/null +++ b/hw/bsp/maxim/boards/max32666evkit/board.h @@ -0,0 +1,62 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2024, Brent Kowal (Analog Devices, Inc) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +/* metadata: + name: MAX32666 EVKIT + url: https://www.analog.com/en/resources/evaluation-hardware-and-software/evaluation-boards-kits/max32666evkit.html +*/ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#include "gpio.h" +#include "mxc_sys.h" + +#ifdef __cplusplus +extern "C" { +#endif + +// LED +#define LED_PORT MXC_GPIO1 +#define LED_PIN MXC_GPIO_PIN_14 +#define LED_VDDIO MXC_GPIO_VSSEL_VDDIOH +#define LED_STATE_ON 0 + +// Button +#define BUTTON_PORT MXC_GPIO1 +#define BUTTON_PIN MXC_GPIO_PIN_6 +#define BUTTON_PULL MXC_GPIO_PAD_PULL_UP +#define BUTTON_STATE_ACTIVE 0 + +// UART Enable for EvKit's Integrated FTDI Adapter. Pin Mux handled by the HAL +#define UART_NUM 1 +#define UART_MAP MAP_A + +#ifdef __cplusplus +} +#endif + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/maxim/boards/max32666fthr/board.cmake b/hw/bsp/maxim/boards/max32666fthr/board.cmake new file mode 100644 index 000000000..e7116b603 --- /dev/null +++ b/hw/bsp/maxim/boards/max32666fthr/board.cmake @@ -0,0 +1,4 @@ +set(MAX_DEVICE max32665) + +function(update_board TARGET) +endfunction() diff --git a/hw/bsp/maxim/boards/max32666fthr/board.h b/hw/bsp/maxim/boards/max32666fthr/board.h new file mode 100644 index 000000000..0caea5934 --- /dev/null +++ b/hw/bsp/maxim/boards/max32666fthr/board.h @@ -0,0 +1,62 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2024, Brent Kowal (Analog Devices, Inc) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +/* metadata: + name: MAX32666 Feather + url: https://www.analog.com/en/resources/evaluation-hardware-and-software/evaluation-boards-kits/max32666fthr.html +*/ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#include "gpio.h" +#include "mxc_sys.h" + +#ifdef __cplusplus +extern "C" { +#endif + +// LED +#define LED_PORT MXC_GPIO0 +#define LED_PIN MXC_GPIO_PIN_29 +#define LED_VDDIO MXC_GPIO_VSSEL_VDDIOH +#define LED_STATE_ON 0 + +// Button +#define BUTTON_PORT MXC_GPIO1 +#define BUTTON_PIN MXC_GPIO_PIN_10 +#define BUTTON_PULL MXC_GPIO_PAD_PULL_UP +#define BUTTON_STATE_ACTIVE 0 + +// UART Enable for UART on SWD. Pin Mux handled by the HAL +#define UART_NUM 1 +#define UART_MAP MAP_B + +#ifdef __cplusplus +} +#endif + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/maxim/boards/max32690evkit/board.cmake b/hw/bsp/maxim/boards/max32690evkit/board.cmake new file mode 100644 index 000000000..a03d05f8d --- /dev/null +++ b/hw/bsp/maxim/boards/max32690evkit/board.cmake @@ -0,0 +1,4 @@ +set(MAX_DEVICE max32690) + +function(update_board TARGET) +endfunction() diff --git a/hw/bsp/maxim/boards/max32690evkit/board.h b/hw/bsp/maxim/boards/max32690evkit/board.h new file mode 100644 index 000000000..aa8dbb1de --- /dev/null +++ b/hw/bsp/maxim/boards/max32690evkit/board.h @@ -0,0 +1,61 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2024, Brent Kowal (Analog Devices, Inc) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +/* metadata: + name: MAX32690 EVKIT + url: https://www.analog.com/en/resources/evaluation-hardware-and-software/evaluation-boards-kits/max32690evkit.html +*/ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#include "gpio.h" +#include "mxc_sys.h" + +#ifdef __cplusplus +extern "C" { +#endif + +// LED +#define LED_PORT MXC_GPIO0 +#define LED_PIN MXC_GPIO_PIN_14 +#define LED_VDDIO MXC_GPIO_VSSEL_VDDIOH +#define LED_STATE_ON 0 + +// Button +#define BUTTON_PORT MXC_GPIO4 +#define BUTTON_PIN MXC_GPIO_PIN_0 +#define BUTTON_PULL MXC_GPIO_PAD_PULL_UP +#define BUTTON_STATE_ACTIVE 0 + +// UART Enable for EvKit's Integrated FTDI Adapter. Pin Mux handled by the HAL +#define UART_NUM 2 + +#ifdef __cplusplus +} +#endif + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/maxim/boards/max78002evkit/board.cmake b/hw/bsp/maxim/boards/max78002evkit/board.cmake new file mode 100644 index 000000000..dd4c3c215 --- /dev/null +++ b/hw/bsp/maxim/boards/max78002evkit/board.cmake @@ -0,0 +1,4 @@ +set(MAX_DEVICE max78002) + +function(update_board TARGET) +endfunction() diff --git a/hw/bsp/maxim/boards/max78002evkit/board.h b/hw/bsp/maxim/boards/max78002evkit/board.h new file mode 100644 index 000000000..85d55d7de --- /dev/null +++ b/hw/bsp/maxim/boards/max78002evkit/board.h @@ -0,0 +1,63 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2024, Brent Kowal (Analog Devices, Inc) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +/* metadata: + name: MAX78002 EVKIT + url: https://www.analog.com/en/resources/evaluation-hardware-and-software/evaluation-boards-kits/max78002evkit.html +*/ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#include "gpio.h" +#include "mxc_sys.h" + +#ifdef __cplusplus +extern "C" { +#endif + +// LED +#define LED_PORT MXC_GPIO2 +#define LED_PIN MXC_GPIO_PIN_4 +#define LED_VDDIO MXC_GPIO_VSSEL_VDDIOH +#define LED_STATE_ON 1 + +// Button +#define BUTTON_PORT MXC_GPIO2 +#define BUTTON_PIN MXC_GPIO_PIN_6 +#define BUTTON_PULL MXC_GPIO_PAD_PULL_UP +#define BUTTON_STATE_ACTIVE 0 + +// UART Enable for EvKit's Integrated FTDI Adapter. Pin Mux handled by the HAL +#define UART_NUM 0 +#define UART_PORT MXC_GPIO0 +#define UART_VDDIO_BITS 0xF + +#ifdef __cplusplus +} +#endif + +#endif /* BOARD_H_ */ diff --git a/hw/bsp/maxim/family.c b/hw/bsp/maxim/family.c new file mode 100644 index 000000000..0ef6b8c4d --- /dev/null +++ b/hw/bsp/maxim/family.c @@ -0,0 +1,213 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2024 Brent Kowal (Analog Devices, Inc) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +/* metadata: + manufacturer: Analog Devices +*/ + +#ifdef __GNUC__ +#pragma GCC diagnostic push +#pragma GCC diagnostic ignored "-Wstrict-prototypes" // _mxc_crit_get_state() +#endif + +#include "gpio.h" +#include "mxc_sys.h" +#if __has_include("mcr_regs.h") +#include "mcr_regs.h" +#endif +#include "mxc_device.h" +#include "uart.h" + +#ifdef __GNUC__ +#pragma GCC diagnostic pop +#endif + +#include "board.h" +#include "bsp/board_api.h" + +//--------------------------------------------------------------------+ +// Forward USB interrupt events to TinyUSB IRQ Handler +//--------------------------------------------------------------------+ +void USB_IRQHandler(void) { + tud_int_handler(0); +} + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM +//--------------------------------------------------------------------+ +mxc_uart_regs_t *ConsoleUart = MXC_UART_GET_UART(UART_NUM); + +void board_init(void) { +#if CFG_TUSB_OS == OPT_OS_NONE + // 1ms tick timer + SysTick_Config(SystemCoreClock / 1000); +#elif CFG_TUSB_OS == OPT_OS_FREERTOS + // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) + NVIC_SetPriority(USB_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY); +#endif + mxc_gpio_cfg_t gpioConfig; + + // LED + gpioConfig.drvstr = MXC_GPIO_DRVSTR_0; + gpioConfig.func = MXC_GPIO_FUNC_OUT; + gpioConfig.mask = LED_PIN; + gpioConfig.pad = MXC_GPIO_PAD_NONE; + gpioConfig.port = LED_PORT; + gpioConfig.vssel = LED_VDDIO; + MXC_GPIO_Config(&gpioConfig); + board_led_write(false); + + // Button + gpioConfig.drvstr = MXC_GPIO_DRVSTR_0; + gpioConfig.func = MXC_GPIO_FUNC_IN; + gpioConfig.mask = BUTTON_PIN; + gpioConfig.pad = BUTTON_PULL; + gpioConfig.port = BUTTON_PORT; + gpioConfig.vssel = MXC_GPIO_VSSEL_VDDIO; + MXC_GPIO_Config(&gpioConfig); + + // UART +#if MAX_PERIPH_ID == 14 + MXC_UART_Init(ConsoleUart, CFG_BOARD_UART_BAUDRATE, UART_MAP); +#elif MAX_PERIPH_ID == 18 || MAX_PERIPH_ID == 87 + MXC_UART_Init(ConsoleUart, CFG_BOARD_UART_BAUDRATE, MXC_UART_IBRO_CLK); + #if MAX_PERIPH_ID == 87 + UART_PORT->vssel |= UART_VDDIO_BITS; // Set necessary bits to 3.3V + #endif +#endif + + //USB +#if defined(MAX32650) + // Startup the HIRC96M clock if it's not on already + if (!(MXC_GCR->clk_ctrl & MXC_F_GCR_CLK_CTRL_HIRC96_EN)) { + MXC_GCR->clk_ctrl |= MXC_F_GCR_CLK_CTRL_HIRC96_EN; + MXC_SYS_Clock_Timeout(MXC_F_GCR_CLK_CTRL_HIRC96_RDY); + } + MXC_SYS_ClockEnable(MXC_SYS_PERIPH_CLOCK_USB); + MXC_SYS_Reset_Periph(MXC_SYS_RESET_USB); + +#elif defined(MAX32665) || defined(MAX32666) + // Startup the HIRC96M clock if it's not on already + if (!(MXC_GCR->clkcn & MXC_F_GCR_CLKCN_HIRC96M_EN)) { + MXC_GCR->clkcn |= MXC_F_GCR_CLKCN_HIRC96M_EN; + } + MXC_SYS_ClockEnable(MXC_SYS_PERIPH_CLOCK_USB); + MXC_SYS_Reset_Periph(MXC_SYS_RESET_USB); + +#elif defined(MAX32690) + MXC_SYS_ClockSourceEnable(MXC_SYS_CLOCK_IPO); + MXC_MCR->ldoctrl |= MXC_F_MCR_LDOCTRL_0P9EN; + MXC_SYS_ClockEnable(MXC_SYS_PERIPH_CLOCK_USB); + MXC_SYS_Reset_Periph(MXC_SYS_RESET0_USB); + +# elif defined(MAX78002) + MXC_MCR->ldoctrl |= MXC_F_MCR_LDOCTRL_0P9EN; + MXC_SYS_ClockEnable(MXC_SYS_PERIPH_CLOCK_USB); +#else + #error "Unsupported MAXIM MCU for board_dfu_init" +#endif +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) { +#if LED_STATE_ON + state = !state; +#endif + if (state) { + MXC_GPIO_OutClr(LED_PORT, LED_PIN); + } else { + MXC_GPIO_OutSet(LED_PORT, LED_PIN); + } +} + +uint32_t board_button_read(void) { + uint32_t state = MXC_GPIO_InGet(BUTTON_PORT, BUTTON_PIN) ? 1 : 0; + return BUTTON_STATE_ACTIVE == state; +} + +size_t board_get_unique_id(uint8_t id[], size_t max_len) { +#if defined(MAX32650) + // USN is 13 bytes on this device + MXC_SYS_GetUSN(id, 13); + return 13; +#else + uint8_t hw_id[MXC_SYS_USN_CHECKSUM_LEN]; //USN Buffer + MXC_SYS_GetUSN(hw_id, NULL); // 2nd parameter is optional checksum buffer + + size_t act_len = TU_MIN(max_len, MXC_SYS_USN_LEN); + memcpy(id, hw_id, act_len); + return act_len; +#endif +} + +int board_uart_read(uint8_t *buf, int len) { + int uart_val; + int act_len = 0; + + while (act_len < len) { + if ((uart_val = MXC_UART_ReadCharacterRaw(ConsoleUart)) == E_UNDERFLOW) { + break; + } else { + *buf++ = (uint8_t) uart_val; + act_len++; + } + } + return act_len; +} + +int board_uart_write(void const *buf, int len) { + int act_len = 0; + const uint8_t *ch_ptr = (const uint8_t *) buf; + while (act_len < len) { + MXC_UART_WriteCharacter(ConsoleUart, *ch_ptr++); + act_len++; + } + return len; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; + +void SysTick_Handler(void) { + system_ticks++; +} + +uint32_t board_millis(void) { + return system_ticks; +} +#endif + +void HardFault_Handler(void) { + __asm("BKPT #0\n"); +} + +// Required by __libc_init_array in startup code if we are compiling using +// -nostdlib/-nostartfiles. +void _init(void) { +} diff --git a/hw/bsp/maxim/family.cmake b/hw/bsp/maxim/family.cmake new file mode 100644 index 000000000..1fd5215ba --- /dev/null +++ b/hw/bsp/maxim/family.cmake @@ -0,0 +1,205 @@ +include_guard() + +# stub: overridden by board.cmake if needed +function(sign_image TARGET_IN) +endfunction() + +set(MSDK_LIB ${TOP}/hw/mcu/analog/msdk/Libraries) + +# include board specific +include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) + +# toolchain set up +set(CMAKE_SYSTEM_CPU cortex-m4 CACHE INTERNAL "System Processor") +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) + +cmake_print_variables(MAX_DEVICE) +string(TOUPPER ${MAX_DEVICE} MAX_DEVICE_UPPER) + +set(JLINK_DEVICE ${MAX_DEVICE}) +set(OPENOCD_OPTION "-f interface/cmsis-dap.cfg -f target/${MAX_DEVICE}.cfg") + +set(FAMILY_MCUS ${MAX_DEVICE_UPPER} CACHE INTERNAL "") + +if (${MAX_DEVICE} STREQUAL "max32650") + set(PERIPH_ID 10) + set(PERIPH_SUFFIX "me") +elseif (${MAX_DEVICE} STREQUAL "max32665" OR ${MAX_DEVICE} STREQUAL "max32666") + set(PERIPH_ID 14) + set(PERIPH_SUFFIX "me") +elseif (${MAX_DEVICE} STREQUAL "max32690") + set(PERIPH_ID 18) + set(PERIPH_SUFFIX "me") +elseif (${MAX_DEVICE} STREQUAL "max78002") + set(PERIPH_ID 87) + set(PERIPH_SUFFIX "ai") +else() + message(FATAL_ERROR "Unsupported MAX device: ${MAX_DEVICE}") +endif() + +#------------------------------------ +# BOARD_TARGET +#------------------------------------ +# only need to be built ONCE for all examples +function(add_board_target BOARD_TARGET) + if (TARGET ${BOARD_TARGET}) + return() + endif () + + # Startup & Linker script + set(STARTUP_FILE_GNU ${MSDK_LIB}/CMSIS/Device/Maxim/${MAX_DEVICE_UPPER}/Source/GCC/startup_${MAX_DEVICE}.S) + set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) + + if (NOT DEFINED LD_FILE_GNU) + set(LD_FILE_GNU ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/linker/${MAX_DEVICE}.ld) + endif () + set(LD_FILE_Clang ${LD_FILE_GNU}) + + # Common + add_library(${BOARD_TARGET} STATIC + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} + ${MSDK_LIB}/CMSIS/Device/Maxim/${MAX_DEVICE_UPPER}/Source/heap.c + ${MSDK_LIB}/CMSIS/Device/Maxim/${MAX_DEVICE_UPPER}/Source/system_${MAX_DEVICE}.c + ${MSDK_LIB}/PeriphDrivers/Source/SYS/mxc_assert.c + ${MSDK_LIB}/PeriphDrivers/Source/SYS/mxc_delay.c + ${MSDK_LIB}/PeriphDrivers/Source/SYS/mxc_lock.c + ${MSDK_LIB}/PeriphDrivers/Source/SYS/nvic_table.c + ${MSDK_LIB}/PeriphDrivers/Source/SYS/pins_${PERIPH_SUFFIX}${PERIPH_ID}.c + ${MSDK_LIB}/PeriphDrivers/Source/SYS/sys_${PERIPH_SUFFIX}${PERIPH_ID}.c + ${MSDK_LIB}/PeriphDrivers/Source/FLC/flc_common.c + ${MSDK_LIB}/PeriphDrivers/Source/FLC/flc_${PERIPH_SUFFIX}${PERIPH_ID}.c + ${MSDK_LIB}/PeriphDrivers/Source/FLC/flc_reva.c + ${MSDK_LIB}/PeriphDrivers/Source/GPIO/gpio_common.c + ${MSDK_LIB}/PeriphDrivers/Source/GPIO/gpio_${PERIPH_SUFFIX}${PERIPH_ID}.c + ${MSDK_LIB}/PeriphDrivers/Source/GPIO/gpio_reva.c + ${MSDK_LIB}/PeriphDrivers/Source/ICC/icc_${PERIPH_SUFFIX}${PERIPH_ID}.c + ${MSDK_LIB}/PeriphDrivers/Source/ICC/icc_reva.c + ${MSDK_LIB}/PeriphDrivers/Source/UART/uart_common.c + ${MSDK_LIB}/PeriphDrivers/Source/UART/uart_${PERIPH_SUFFIX}${PERIPH_ID}.c + ) + target_include_directories(${BOARD_TARGET} PUBLIC + ${MSDK_LIB}/CMSIS/5.9.0/Core/Include + ${MSDK_LIB}/CMSIS/Device/Maxim/${MAX_DEVICE_UPPER}/Include + ${MSDK_LIB}/PeriphDrivers/Include/${MAX_DEVICE_UPPER} + ${MSDK_LIB}/PeriphDrivers/Source/SYS + ${MSDK_LIB}/PeriphDrivers/Source/GPIO + ${MSDK_LIB}/PeriphDrivers/Source/ICC + ${MSDK_LIB}/PeriphDrivers/Source/FLC + ${MSDK_LIB}/PeriphDrivers/Source/UART + ) + + # device specific + if (${MAX_DEVICE} STREQUAL "max32650" OR + ${MAX_DEVICE} STREQUAL "max32665" OR ${MAX_DEVICE} STREQUAL "max32666") + target_sources(${BOARD_TARGET} PRIVATE + ${MSDK_LIB}/PeriphDrivers/Source/ICC/icc_common.c + ${MSDK_LIB}/PeriphDrivers/Source/TPU/tpu_${PERIPH_SUFFIX}${PERIPH_ID}.c + ${MSDK_LIB}/PeriphDrivers/Source/TPU/tpu_reva.c + ${MSDK_LIB}/PeriphDrivers/Source/UART/uart_reva.c + ) + target_include_directories(${BOARD_TARGET} PUBLIC + ${MSDK_LIB}/PeriphDrivers/Source/TPU + ) + elseif (${MAX_DEVICE} STREQUAL "max32690") + target_sources(${BOARD_TARGET} PRIVATE + ${MSDK_LIB}/PeriphDrivers/Source/CTB/ctb_${PERIPH_SUFFIX}${PERIPH_ID}.c + ${MSDK_LIB}/PeriphDrivers/Source/CTB/ctb_reva.c + ${MSDK_LIB}/PeriphDrivers/Source/CTB/ctb_common.c + ${MSDK_LIB}/PeriphDrivers/Source/UART/uart_revb.c + ) + target_include_directories(${BOARD_TARGET} PUBLIC + ${MSDK_LIB}/PeriphDrivers/Source/CTB + ) + elseif (${MAX_DEVICE} STREQUAL "max78002") + target_sources(${BOARD_TARGET} PRIVATE + ${MSDK_LIB}/PeriphDrivers/Source/AES/aes_${PERIPH_SUFFIX}${PERIPH_ID}.c + ${MSDK_LIB}/PeriphDrivers/Source/AES/aes_revb.c + ${MSDK_LIB}/PeriphDrivers/Source/TRNG/trng_${PERIPH_SUFFIX}${PERIPH_ID}.c + ${MSDK_LIB}/PeriphDrivers/Source/TRNG/trng_revb.c + ${MSDK_LIB}/PeriphDrivers/Source/UART/uart_revb.c + ) + target_include_directories(${BOARD_TARGET} PUBLIC + ${MSDK_LIB}/PeriphDrivers/Source/AES + ${MSDK_LIB}/PeriphDrivers/Source/TRNG + ) + else() + message(FATAL_ERROR "Unsupported MAX device: ${MAX_DEVICE}") + endif() + + target_compile_definitions(${BOARD_TARGET} PUBLIC + TARGET=${MAX_DEVICE_UPPER} + TARGET_REV=0x4131 + MXC_ASSERT_ENABLE + ${MAX_DEVICE_UPPER} + IAR_PRAGMAS=0 + FLASH_BOOT_SIZE=${FLASH_BOOT_SIZE} + MAX_PERIPH_ID=${PERIPH_ID} + ) + + target_compile_definitions(${TARGET} PUBLIC + TARGET=MAX32690 + TARGET_REV=0x4131 + MXC_ASSERT_ENABLE + MAX32690 + BOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED + ) + + target_compile_options(${BOARD_TARGET} PRIVATE + -Wno-error=strict-prototypes + ) + update_board(${BOARD_TARGET}) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + -nostartfiles + --specs=nosys.specs --specs=nano.specs + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_Clang}" + ) + endif () +endfunction() + + +#------------------------------------ +# Functions +#------------------------------------ +function(family_configure_example TARGET RTOS) + family_configure_common(${TARGET} ${RTOS}) + + # Board target + add_board_target(board_${BOARD}) + + #---------- Port Specific ---------- + # These files are built for each example since it depends on example's tusb_config.h + target_sources(${TARGET} PUBLIC + # BSP + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ) + target_include_directories(${TARGET} PUBLIC + # family, hw, board + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} + ) + + # Add TinyUSB target and port source + family_add_tinyusb(${TARGET} OPT_MCU_${MAX_DEVICE_UPPER}) + target_sources(${TARGET} PUBLIC + ${TOP}/src/portable/mentor/musb/dcd_musb.c + ) + target_compile_options(${TARGET} PRIVATE + -Wno-error=strict-prototypes + ) + target_link_libraries(${TARGET} PUBLIC board_${BOARD}) + + # Flashing + family_add_bin_hex(${TARGET}) + family_flash_jlink(${TARGET}) + + sign_image(${TARGET}) # for secured device such as max32651 + family_flash_openocd_adi(${TARGET}) +endfunction() diff --git a/hw/bsp/maxim/linker/max32650.ld b/hw/bsp/maxim/linker/max32650.ld new file mode 100644 index 000000000..0e56a91ec --- /dev/null +++ b/hw/bsp/maxim/linker/max32650.ld @@ -0,0 +1,119 @@ +MEMORY { + ROM (rx) : ORIGIN = 0x00000000, LENGTH = 0x00010000 /* 64kB ROM */ + FLASH (rx) : ORIGIN = 0x10000000, LENGTH = 0x00300000 /* 3MB flash */ + SRAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00100000 /* 1MB SRAM */ +} + +SECTIONS { + .text : + { + _text = .; + KEEP(*(.isr_vector)) + *(.text*) /* program code */ + *(.rodata*) /* read-only data: "const" */ + + KEEP(*(.init)) + KEEP(*(.fini)) + + /* .ctors */ + *crtbegin.o(.ctors) + *crtbegin?.o(.ctors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) + *(SORT(.ctors.*)) + *(.ctors) + + /* .dtors */ + *crtbegin.o(.dtors) + *crtbegin?.o(.dtors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) + *(SORT(.dtors.*)) + *(.dtors) + + /* C++ Exception handling */ + KEEP(*(.eh_frame*)) + _etext = .; + } > FLASH + + .ARM.extab : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } > FLASH + + /* it's used for C++ exception handling */ + /* we need to keep this to avoid overlapping */ + .ARM.exidx : + { + __exidx_start = .; + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + __exidx_end = .; + } > FLASH + + .data : + { + _data = ALIGN(., 4); + *(vtable) + *(.data*) /*read-write initialized data: initialized global variable*/ + *(.spix_config*) /* SPIX configuration functions need to be run from SRAM */ + *(.flashprog*) /* Flash program */ + + + /* These array sections are used by __libc_init_array to call static C++ constructors */ + . = ALIGN(4); + /* preinit data */ + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP(*(.preinit_array)) + PROVIDE_HIDDEN (__preinit_array_end = .); + + . = ALIGN(4); + /* init data */ + PROVIDE_HIDDEN (__init_array_start = .); + KEEP(*(SORT(.init_array.*))) + KEEP(*(.init_array)) + PROVIDE_HIDDEN (__init_array_end = .); + + . = ALIGN(4); + /* finit data */ + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP(*(SORT(.fini_array.*))) + KEEP(*(.fini_array)) + PROVIDE_HIDDEN (__fini_array_end = .); + + _edata = ALIGN(., 4); + } > SRAM AT>FLASH + __load_data = LOADADDR(.data); + .bss : + { + . = ALIGN(4); + _bss = .; + *(.bss*) /*read-write zero initialized data: uninitialized global variable*/ + *(COMMON) + _ebss = ALIGN(., 4); + } > SRAM + + /* Set stack top to end of RAM, and stack limit move down by + * size of stack_dummy section */ + __StackTop = ORIGIN(SRAM) + LENGTH(SRAM); + __StackLimit = __StackTop - SIZEOF(.stack_dummy); + + /* .stack_dummy section doesn't contains any symbols. It is only + * used for linker to calculate size of stack sections, and assign + * values to stack symbols later */ + .stack_dummy (COPY): + { + *(.stack*) + } > SRAM + + .heap (COPY): + { + . = ALIGN(4); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + *(.heap*) + __HeapLimit = ABSOLUTE(__StackLimit); + } > SRAM + + PROVIDE(__stack = __StackTop); + + /* Check if data + heap + stack exceeds RAM limit */ + ASSERT(__StackLimit >= _ebss, "region RAM overflowed with stack") +} diff --git a/hw/bsp/maxim/linker/max32651.ld b/hw/bsp/maxim/linker/max32651.ld new file mode 100644 index 000000000..3921d10f2 --- /dev/null +++ b/hw/bsp/maxim/linker/max32651.ld @@ -0,0 +1,132 @@ +MEMORY { + HEADER (rx): ORIGIN = 0x10000000, LENGTH = 0x200 + FLASH (rx) : ORIGIN = 0x10000200, LENGTH = 0x002FFE00 /* 3MB flash */ + SRAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00100000 /* 1MB SRAM */ +} + +/* Added Oct 9, 2018 to go to correct reset vector. */ +ENTRY(Reset_Handler) +PROVIDE( _start_SWAP = (((Reset_Handler) >> 24) | (((Reset_Handler) & 0x00FF0000) >> 8) | (((Reset_Handler) & 0x0000FF00) << 8) | ((Reset_Handler) << 24))); +PROVIDE_HIDDEN( _SLA_Size = _endimage - __end_header ); +PROVIDE( _SLA_Size_SWAP = (((_SLA_Size) >> 24) | (((_SLA_Size) & 0x00FF0000) >> 8) | (((_SLA_Size) & 0x0000FF00) << 8) | ((_SLA_Size) << 24))); + +/* Sections Definitions */ +SECTIONS { + .sb_sla_header : ALIGN(4) + { + FILL(0xFF) + KEEP(*(.sb_sla_header)) /* Header for ROM code */ + __end_header = . ; + . = ALIGN(512); + } > HEADER + + .text : + { + _text = .; + KEEP(*(.isr_vector)) + *(.text*) /* program code */ + *(.rodata*) /* read-only data: "const" */ + + KEEP(*(.init)) + KEEP(*(.fini)) + + /* C++ Exception handling */ + KEEP(*(.eh_frame*)) + _etext = .; + } > FLASH + + /* it's used for C++ exception handling */ + /* we need to keep this to avoid overlapping */ + .ARM.exidx : + { + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + } > FLASH + + .data : + { + _data = ALIGN(., 4); + *(.data*) /*read-write initialized data: initialized global variable*/ + *(.spix_config*) /* SPIX configuration functions need to be run from SRAM */ + *(.flashprog*) /* Flash program */ + + + /* These array sections are used by __libc_init_array to call static C++ constructors */ + . = ALIGN(4); + /* preinit data */ + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP(*(.preinit_array)) + PROVIDE_HIDDEN (__preinit_array_end = .); + + . = ALIGN(4); + /* init data */ + PROVIDE_HIDDEN (__init_array_start = .); + KEEP(*(SORT(.init_array.*))) + KEEP(*(.init_array)) + PROVIDE_HIDDEN (__init_array_end = .); + + . = ALIGN(4); + /* finit data */ + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP(*(SORT(.fini_array.*))) + KEEP(*(.fini_array)) + PROVIDE_HIDDEN (__fini_array_end = .); + + _edata = ALIGN(., 4); + } > SRAM AT>FLASH + __load_data = LOADADDR(.data); + _enddata = LOADADDR(.data)+SIZEOF(.data); + + .sb_sla_trailer : AT(_enddata) + { + KEEP(*(.sb_sla_trailer)) + /* Align image with 16 byte boundary to conform to flash encryption block size. */ + FILL(0xDEADC0DE); + /* NOTE: The FILL and ALIGN will not work unless something is written to the section. So, we use LONG. */ + LONG(0xDEADC0DE); + . = ALIGN(16); + } > FLASH + _endimage = LOADADDR(.sb_sla_trailer)+SIZEOF(.sb_sla_trailer); + .sig : + { + KEEP(*(.sig)) + LONG(0xDEADBEEF); + + } > FLASH + .bss : + { + . = ALIGN(4); + _bss = .; + *(.bss*) /*read-write zero initialized data: uninitialized global variable*/ + *(COMMON) + _ebss = ALIGN(., 4); + } > SRAM + + /* Set stack top to end of RAM, and stack limit move down by + * size of stack_dummy section */ + __StackTop = ORIGIN(SRAM) + LENGTH(SRAM); + __StackLimit = __StackTop - SIZEOF(.stack_dummy); + + /* .stack_dummy section doesn't contains any symbols. It is only + * used for linker to calculate size of stack sections, and assign + * values to stack symbols later */ + .stack_dummy (COPY): + { + *(.stack*) + } > SRAM + + .heap (COPY): + { + . = ALIGN(4); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + *(.heap*) + __HeapLimit = ABSOLUTE(__StackLimit); + } > SRAM + + PROVIDE(__stack = __StackTop); + + /* Check if data + heap + stack exceeds RAM limit */ + ASSERT(__StackLimit >= _ebss, "region RAM overflowed with stack") +} diff --git a/hw/bsp/maxim/linker/max32665.ld b/hw/bsp/maxim/linker/max32665.ld new file mode 100644 index 000000000..06c124247 --- /dev/null +++ b/hw/bsp/maxim/linker/max32665.ld @@ -0,0 +1,135 @@ +/* SPID and SPIX Sections here are maximum possible sizes */ +/* If used, they should be adjusted for the external Flash/RAM size */ +MEMORY { + + SPIX (rx) : ORIGIN = 0x08000000, LENGTH = 0x08000000 + FLASH (rx) : ORIGIN = 0x10000000, LENGTH = 0x00100000 + SRAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x0008C000 + SPID (rw) : ORIGIN = 0x80000000, LENGTH = 512M +} + +/* Sections Definitions */ +SECTIONS { + .text : + { + _text = .; + KEEP(*(.isr_vector)) + *(.text*) /* program code */ + *(.rodata*) /* read-only data: "const" */ + + KEEP(*(.init)) + KEEP(*(.fini)) + + /* .ctors */ + *crtbegin.o(.ctors) + *crtbegin?.o(.ctors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) + *(SORT(.ctors.*)) + *(.ctors) + + /* .dtors */ + *crtbegin.o(.dtors) + *crtbegin?.o(.dtors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) + *(SORT(.dtors.*)) + *(.dtors) + + /* C++ Exception handling */ + KEEP(*(.eh_frame*)) + _etext = .; + } > FLASH + + .ARM.extab : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } > FLASH + + /* This section will keep the SPIX data until loaded into the external device */ + /* Upon initialization of SPIX (user code needs to do this) */ + .xip_section : + { + KEEP(*(.xip_section*)) + } > SPIX AT>FLASH + + __load_start_xip = LOADADDR(.xip_section); + __load_length_xip = SIZEOF(.xip_section); + + /* it's used for C++ exception handling */ + /* we need to keep this to avoid overlapping */ + .ARM.exidx : + { + __exidx_start = .; + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + __exidx_end = .; + } > FLASH + + .data : + { + _data = ALIGN(., 4); + *(vtable) + *(.data*) /*read-write initialized data: initialized global variable*/ + *(.spix_config*) /* SPIX configuration functions need to be run from SRAM */ + *(.flashprog*) /* Flash program */ + + + /* These array sections are used by __libc_init_array to call static C++ constructors */ + . = ALIGN(4); + /* preinit data */ + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP(*(.preinit_array)) + PROVIDE_HIDDEN (__preinit_array_end = .); + + . = ALIGN(4); + /* init data */ + PROVIDE_HIDDEN (__init_array_start = .); + KEEP(*(SORT(.init_array.*))) + KEEP(*(.init_array)) + PROVIDE_HIDDEN (__init_array_end = .); + + . = ALIGN(4); + /* finit data */ + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP(*(SORT(.fini_array.*))) + KEEP(*(.fini_array)) + PROVIDE_HIDDEN (__fini_array_end = .); + + _edata = ALIGN(., 4); + } > SRAM AT>FLASH + __load_data = LOADADDR(.data); + + .bss : + { + . = ALIGN(4); + _bss = .; + *(.bss*) /*read-write zero initialized data: uninitialized global variable*/ + *(COMMON) + _ebss = ALIGN(., 4); + } > SRAM + + /* Setup the stack for Core 1, it will only be used if the user code + * includes a definition of Stack_Size_Core1, which defines the space + * reserved above the main core's stack for core 1's stack */ + + __StackTop_Core1 = ORIGIN(SRAM) + LENGTH(SRAM); + __StackLimit_Core1 = DEFINED(Stack_Size_Core1) ? __StackTop_Core1 - Stack_Size_Core1 : __StackTop_Core1; + + /* Set stack top to end of RAM, and stack limit move down by Stack_Size. + * If core 1 is used, set the stack to the bottom of Core 1's stack region */ + + __StackTop = DEFINED(Stack_Size_Core1) ? __StackLimit_Core1 : ORIGIN(SRAM) + LENGTH(SRAM); + __StackLimit = __StackTop - Stack_Size; + + .heap (COPY): + { + . = ALIGN(4); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + *(.heap*) + __HeapLimit = ABSOLUTE(__StackLimit); + } > SRAM + + PROVIDE(__stack = __StackTop); + + /* Check if data + heap + stack(s) exceeds RAM limit */ + ASSERT(__StackLimit >= _ebss, "region RAM overflowed with stack") +} diff --git a/hw/bsp/maxim/linker/max32690.ld b/hw/bsp/maxim/linker/max32690.ld new file mode 100644 index 000000000..64b906a54 --- /dev/null +++ b/hw/bsp/maxim/linker/max32690.ld @@ -0,0 +1,164 @@ +MEMORY { + ROM (rx) : ORIGIN = 0x00000000, LENGTH = 0x00020000 /* 128kB ROM */ + FLASH (rx) : ORIGIN = 0x10000000, LENGTH = 0x00340000 + SRAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00100000 + + /* + * Note that CS0/CS1 address mappings may be reversed using MXC_HPC->mbr0 and ->mbr1 + * The following mappings are selected for simplicity + */ + HPB_CS0 (rwx) : ORIGIN = 0x60000000, LENGTH = 0x10000000 /* External Hyperbus/Xccelabus chip select 0 */ + HPB_CS1 (rwx) : ORIGIN = 0x70000000, LENGTH = 0x10000000 /* External Hyperbus/Xccelabus chip select 1 */ +} + +SECTIONS { + .rom : + { + KEEP(*(.rom_vector)) + *(.rom_handlers*) + } > ROM + + .text : + { + _text = .; + KEEP(*(.isr_vector)) + EXCLUDE_FILE (*riscv.o) *(.text*) /* program code, exclude RISCV code */ + *(.rodata*) /* read-only data: "const" */ + + KEEP(*(.init)) + KEEP(*(.fini)) + + /* .ctors */ + *crtbegin.o(.ctors) + *crtbegin?.o(.ctors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) + *(SORT(.ctors.*)) + *(.ctors) + + /* .dtors */ + *crtbegin.o(.dtors) + *crtbegin?.o(.dtors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) + *(SORT(.dtors.*)) + *(.dtors) + + /* C++ Exception handling */ + KEEP(*(.eh_frame*)) + _etext = .; + } > FLASH + + .ARM.extab : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } > FLASH + + /* These sections allow code to be compiled/linked for HPB addresses, but reside in + * flash until copied by code to the external HPB flash device + */ + .hpb_cs0_section : + { + __hpb_cs0_start = ABSOLUTE(.); + KEEP(*(.hpb_cs0_section*)) + } > HPB_CS0 AT>FLASH + + __load_start_hpb_cs0 = LOADADDR(.hpb_cs0_section); + __load_length_hpb_cs0 = SIZEOF(.hpb_cs0_section); + + .hpb_cs1_section : + { + __hpb_cs1_start = ABSOLUTE(.); + KEEP(*(.hpb_cs1_section*)) + } > HPB_CS1 AT>FLASH + + __load_start_hpb_cs1 = LOADADDR(.hpb_cs1_section); + __load_length_hpb_cs1 = SIZEOF(.hpb_cs1_section); + + /* Binary import */ + .bin_storage : + { + FILL(0xFF) + _bin_start_ = .; + KEEP(*(.bin_storage_img)) + _bin_end_ = .; + . = ALIGN(4); + } > FLASH + + /* it's used for C++ exception handling */ + /* we need to keep this to avoid overlapping */ + .ARM.exidx : + { + __exidx_start = .; + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + __exidx_end = .; + } > FLASH + + .data : + { + _data = ALIGN(., 4); + *(vtable) + *(.data*) /*read-write initialized data: initialized global variable*/ + + /* These array sections are used by __libc_init_array to call static C++ constructors */ + . = ALIGN(4); + /* preinit data */ + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP(*(.preinit_array)) + PROVIDE_HIDDEN (__preinit_array_end = .); + + . = ALIGN(4); + /* init data */ + PROVIDE_HIDDEN (__init_array_start = .); + KEEP(*(SORT(.init_array.*))) + KEEP(*(.init_array)) + PROVIDE_HIDDEN (__init_array_end = .); + + . = ALIGN(4); + /* finit data */ + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP(*(SORT(.fini_array.*))) + KEEP(*(.fini_array)) + PROVIDE_HIDDEN (__fini_array_end = .); + + /* Run the flash programming functions from SRAM */ + *(.flashprog) + + _edata = ALIGN(., 4); + } > SRAM AT>FLASH + __load_data = LOADADDR(.data); + + .bss : + { + . = ALIGN(4); + _bss = .; + *(.bss*) /*read-write zero initialized data: uninitialized global variable*/ + *(COMMON) + _ebss = ALIGN(., 4); + } > SRAM + + /* Set stack top to end of RAM, and stack limit move down by + * size of stack_dummy section */ + __StackTop = ORIGIN(SRAM) + LENGTH(SRAM); + __StackLimit = __StackTop - SIZEOF(.stack_dummy); + + /* .stack_dummy section doesn't contains any symbols. It is only + * used for linker to calculate size of stack sections, and assign + * values to stack symbols later */ + .stack_dummy (COPY): + { + *(.stack*) + } > SRAM + + .heap (COPY): + { + . = ALIGN(4); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + *(.heap*) + __HeapLimit = ABSOLUTE(__StackLimit); + } > SRAM + + PROVIDE(__stack = __StackTop); + + /* Check if data + heap + stack exceeds RAM limit */ + ASSERT(__StackLimit >= _ebss, "region RAM overflowed with stack") +} diff --git a/hw/bsp/maxim/linker/max78002.ld b/hw/bsp/maxim/linker/max78002.ld new file mode 100644 index 000000000..e5c4866ee --- /dev/null +++ b/hw/bsp/maxim/linker/max78002.ld @@ -0,0 +1,182 @@ +MEMORY { + ROM (rx) : ORIGIN = 0x00000000, LENGTH = 0x00010000 /* 64 kB ROM */ + FLASH (rx) : ORIGIN = 0x10000000, LENGTH = 0x00280000 /* 2.5 MB Flash */ + SRAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00060000 /* 384 kB SRAM */ + /*CSI2 (rwx) : ORIGIN = 0x2001F000, LENGTH = 0x00001000 4096 B CSI2 Buffer */ +} + +SECTIONS { + .rom : + { + KEEP(*(.rom_vector)) + *(.rom_handlers*) + } > ROM + + .text : + { + _text = .; + KEEP(*(.isr_vector)) + EXCLUDE_FILE (*riscv.o) *(.text*) /* Program code (exclude RISCV code) */ + *(.rodata*) /* read-only data: "const" */ + + KEEP(*(.init)) + KEEP(*(.fini)) + + /* .ctors */ + *crtbegin.o(.ctors) + *crtbegin?.o(.ctors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) + *(SORT(.ctors.*)) + *(.ctors) + + /* .dtors */ + *crtbegin.o(.dtors) + *crtbegin?.o(.dtors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) + *(SORT(.dtors.*)) + *(.dtors) + + /* C++ Exception handling */ + KEEP(*(.eh_frame*)) + _etext = .; + } > FLASH + + .ARM.extab : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } > FLASH + + /* Binary import */ + .bin_storage : + { + FILL(0xFF) + _bin_start_ = .; + KEEP(*(.bin_storage_img)) + _bin_end_ = .; + . = ALIGN(4); + } > FLASH + + .rom_code : + { + . = ALIGN(16); + _sran_code = .; + *(.rom_code_section) + _esran_code = .; + } > ROM + + .flash_code : + { + . = ALIGN(16); + _sran_code = .; + *(.flash_code_section) + _esran_code = .; + } > FLASH + + .sram_code : + { + . = ALIGN(16); + _sran_code = .; + *(.sram_code_section) + _esran_code = .; + } > SRAM + + /* it's used for C++ exception handling */ + /* we need to keep this to avoid overlapping */ + .ARM.exidx : + { + __exidx_start = .; + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + __exidx_end = .; + } > FLASH + + .data : + { + _data = ALIGN(., 4); + _csi = . + 0x20000; + *(vtable) + *(.data*) /*read-write initialized data: initialized global variable*/ + + + /* These array sections are used by __libc_init_array to call static C++ constructors */ + . = ALIGN(4); + /* preinit data */ + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP(*(.preinit_array)) + PROVIDE_HIDDEN (__preinit_array_end = .); + + . = ALIGN(4); + /* init data */ + PROVIDE_HIDDEN (__init_array_start = .); + KEEP(*(SORT(.init_array.*))) + KEEP(*(.init_array)) + PROVIDE_HIDDEN (__init_array_end = .); + + . = ALIGN(4); + /* finit data */ + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP(*(SORT(.fini_array.*))) + KEEP(*(.fini_array)) + PROVIDE_HIDDEN (__fini_array_end = .); + + _edata = ALIGN(., 4); + + } > SRAM AT>FLASH + __load_data = LOADADDR(.data); + + .bss : + { + . = ALIGN(4); + _bss = .; + *(.bss*) /*read-write zero initialized data: uninitialized global variable*/ + *(COMMON) + _ebss = ALIGN(., 4); + } > SRAM + + .shared : + { + . = ALIGN(4); + _shared = .; + *(.mailbox*) + . = ALIGN(4); + *(.shared*) /*read-write zero initialized data: uninitialized global variable*/ + _eshared = ALIGN(., 4); + } > SRAM + __shared_data = LOADADDR(.shared); + + /* Set stack top to end of RAM, and stack limit move down by + * size of stack_dummy section */ + __StackTop = ORIGIN(SRAM) + LENGTH(SRAM); + __StackLimit = __StackTop - SIZEOF(.stack_dummy); + + /* .stack_dummy section doesn't contains any symbols. It is only + * used for linker to calculate size of stack sections, and assign + * values to stack symbols later */ + .stack_dummy (COPY): + { + *(.stack*) + } > SRAM + + .heap (COPY): + { + . = ALIGN(4); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + *(.heap*) + __HeapLimit = ABSOLUTE(__StackLimit); + } > SRAM + + PROVIDE(__stack = __StackTop); + + /* Check if data + heap + stack exceeds RAM limit */ + ASSERT(__StackLimit >= _ebss, "region RAM overflowed with stack") + + /* Section used by RISCV loader projects. See RISCV_LOAD documentation in the build system. */ + .riscv_flash : + { + /* Align address to mod 256 with a small offset. This is required to match the flash page size.*/ + . = ALIGN(256); /* ALIGN operatator is used here. Note that (. & 0x1FFFFF00) was used in the past, but a strange bug was seen on Windows where the & did not behave as expected.*/ + . += 0x100; + _riscv_boot = .; + KEEP(*riscv.o (.text*)) + } > FLASH +} diff --git a/tools/get_deps.py b/tools/get_deps.py index 1ce8be6c7..635edaa66 100755 --- a/tools/get_deps.py +++ b/tools/get_deps.py @@ -25,9 +25,9 @@ deps_optional = { 'hw/mcu/allwinner': ['https://github.com/hathach/allwinner_driver.git', '8e5e89e8e132c0fd90e72d5422e5d3d68232b756', 'fc100s'], - 'hw/mcu/analog/max32' : ['https://github.com/analogdevicesinc/msdk.git', + 'hw/mcu/analog/msdk' : ['https://github.com/analogdevicesinc/msdk.git', 'b20b398d3e5e2007594e54a74ba3d2a2e50ddd75', - 'max32650 max32666 max32690 max78002'], + 'maxim'], 'hw/mcu/bridgetek/ft9xx/ft90x-sdk': ['https://github.com/BRTSG-FOSS/ft90x-sdk.git', '91060164afe239fcb394122e8bf9eb24d3194eb1', 'brtmm90x'], -- cgit v1.3.1 From 14124c1735507cdb40252f04a3580f80dd9952e9 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 11 Jun 2025 19:35:20 +0700 Subject: add h7rs to ci matrix --- .github/workflows/ci_set_matrix.py | 2 +- src/portable/synopsys/dwc2/dwc2_info.md | 116 ++++++++++++++++---------------- src/portable/synopsys/dwc2/dwc2_info.py | 3 +- 3 files changed, 60 insertions(+), 61 deletions(-) (limited to '.github') diff --git a/.github/workflows/ci_set_matrix.py b/.github/workflows/ci_set_matrix.py index bccb07e3e..961e27a8f 100755 --- a/.github/workflows/ci_set_matrix.py +++ b/.github/workflows/ci_set_matrix.py @@ -40,7 +40,7 @@ family_list = { "stm32f4": ["arm-gcc", "arm-clang", "arm-iar"], "stm32f7": ["arm-gcc", "arm-clang", "arm-iar"], "stm32g0 stm32g4 stm32h5": ["arm-gcc", "arm-clang", "arm-iar"], - "stm32h7": ["arm-gcc", "arm-clang", "arm-iar"], + "stm32h7 stm32h7rs": ["arm-gcc", "arm-clang", "arm-iar"], "stm32l0 stm32l4": ["arm-gcc", "arm-clang", "arm-iar"], "stm32u5 stm32wb": ["arm-gcc", "arm-clang", "arm-iar"], "xmc4000": ["arm-gcc"], diff --git a/src/portable/synopsys/dwc2/dwc2_info.md b/src/portable/synopsys/dwc2/dwc2_info.md index 76bd251c7..54b3cae7c 100644 --- a/src/portable/synopsys/dwc2/dwc2_info.md +++ b/src/portable/synopsys/dwc2/dwc2_info.md @@ -1,58 +1,58 @@ -| | BCM2711 (Pi4) | EFM32GG | ESP32-S2/S3 | ESP32-P4 | ST F207/F407/411/429 FS | ST F407/429 HS | ST F412/76x FS | ST F723/L4P5 FS | ST F723 HS | ST F76x HS | ST H743/H750 | ST L476 FS | ST U5A5 HS | ST H7S3 HS | XMC4500 | GD32VF103 | -|:---------------------------|:----------------|:-------------|:--------------|:-------------|:--------------------------|:-----------------|:-----------------|:------------------|:-------------|:-------------|:---------------|:-------------|:-------------|:-------------|:-------------|:------------| -| GUID | 0x2708A000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00001200 | 0x00001100 | 0x00002000 | 0x00003000 | 0x00003100 | 0x00002100 | 0x00002300 | 0x00002000 | 0x00005000 | 0x00005000 | 0x00AEC000 | 0x00001000 | -| GSNPSID | 0x4F54280A | 0x4F54330A | 0x4F54400A | 0x4F54400A | 0x4F54281A | 0x4F54281A | 0x4F54320A | 0x4F54330A | 0x4F54330A | 0x4F54320A | 0x4F54330A | 0x4F54310A | 0x4F54411A | 0x4F54411A | 0x4F54292A | 0x00000000 | -| - specs version | 2.80a | 3.30a | 4.00a | 4.00a | 2.81a | 2.81a | 3.20a | 3.30a | 3.30a | 3.20a | 3.30a | 3.10a | 4.11a | 4.11a | 2.92a | 0.00W | -| GHWCFG1 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | -| GHWCFG2 | 0x228DDD50 | 0x228F5910 | 0x224DD930 | 0x215FFFD0 | 0x229DCD20 | 0x229ED590 | 0x229ED520 | 0x229ED520 | 0x229FE1D0 | 0x229FE190 | 0x229FE190 | 0x229ED520 | 0x228FE052 | 0x228FE052 | 0x228F5930 | 0x00000000 | -| - op_mode | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | noHNP noSRP | noHNP noSRP | HNP SRP | HNP SRP | -| - arch | DMA internal | DMA internal | DMA internal | DMA internal | Slave only | DMA internal | Slave only | Slave only | DMA internal | DMA internal | DMA internal | Slave only | DMA internal | DMA internal | DMA internal | Slave only | -| - single_point | hub | hub | n/a | hub | n/a | hub | n/a | n/a | hub | hub | hub | n/a | hub | hub | n/a | hub | -| - hs_phy_type | UTMI+ | n/a | n/a | UTMI+/ULPI | n/a | ULPI | n/a | n/a | UTMI+/ULPI | ULPI | ULPI | n/a | UTMI+ | UTMI+ | n/a | n/a | -| - fs_phy_type | Dedicated | Dedicated | Dedicated | Shared ULPI | Dedicated | Dedicated | Dedicated | Dedicated | Dedicated | Dedicated | Dedicated | Dedicated | n/a | n/a | Dedicated | n/a | -| - num_dev_ep | 7 | 6 | 6 | 15 | 3 | 5 | 5 | 5 | 8 | 8 | 8 | 5 | 8 | 8 | 6 | 0 | -| - num_host_ch | 7 | 13 | 7 | 15 | 7 | 11 | 11 | 11 | 15 | 15 | 15 | 11 | 15 | 15 | 13 | 0 | -| - period_channel_support | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | -| - enable_dynamic_fifo | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | -| - mul_proc_intrpt | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | 0 | -| - reserved21 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - nptx_q_depth | 8 | 8 | 4 | 4 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 2 | -| - ptx_q_depth | 8 | 8 | 8 | 4 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 2 | -| - token_q_depth | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 0 | -| - otg_enable_ic_usb | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| GHWCFG3 | 0x0FF000E8 | 0x01F204E8 | 0x00C804B5 | 0x03805EB5 | 0x020001E8 | 0x03F403E8 | 0x0200D1E8 | 0x0200D1E8 | 0x03EED2E8 | 0x03EED2E8 | 0x03B8D2E8 | 0x0200D1E8 | 0x03B882E8 | 0x03B882E8 | 0x027A01E5 | 0x00000000 | -| - xfer_size_width | 8 | 8 | 5 | 5 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 5 | 0 | -| - packet_size_width | 6 | 6 | 3 | 3 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 0 | -| - otg_enable | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | -| - i2c_enable | 0 | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | 1 | 0 | 0 | 1 | 0 | -| - vendor_ctrl_itf | 0 | 0 | 0 | 1 | 0 | 1 | 0 | 0 | 1 | 1 | 1 | 0 | 1 | 1 | 0 | 0 | -| - optional_feature_removed | 0 | 1 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - synch_reset | 0 | 0 | 0 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - otg_adp_support | 0 | 0 | 0 | 1 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | 0 | -| - otg_enable_hsic | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - battery_charger_support | 0 | 0 | 0 | 1 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | 0 | -| - lpm_mode | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | -| - dfifo_depth | 4080 | 498 | 200 | 896 | 512 | 1012 | 512 | 512 | 1006 | 1006 | 952 | 512 | 952 | 952 | 634 | 0 | -| GHWCFG4 | 0x1FF00020 | 0x1BF08030 | 0xD3F0A030 | 0xDFF1A030 | 0x0FF08030 | 0x17F00030 | 0x17F08030 | 0x17F08030 | 0x23F00030 | 0x23F00030 | 0xE3F00030 | 0x17F08030 | 0xE2103E30 | 0xE2103E30 | 0xDBF08030 | 0x00000000 | -| - num_dev_period_in_ep | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - partial_powerdown | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | -| - ahb_freq_min | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | -| - hibernation | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - extended_hibernation | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - reserved8 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - enhanced_lpm_support1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 1 | 0 | 0 | -| - service_interval_flow | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 1 | 0 | 0 | -| - ipg_isoc_support | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 1 | 0 | 0 | -| - acg_support | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 1 | 0 | 0 | -| - enhanced_lpm_support | 0 | 0 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 1 | 0 | 0 | -| - phy_data_width | 8 bit | 8/16 bit | 8/16 bit | 8/16 bit | 8/16 bit | 8 bit | 8/16 bit | 8/16 bit | 8 bit | 8 bit | 8 bit | 8/16 bit | 8 bit | 8 bit | 8/16 bit | 8 bit | -| - ctrl_ep_num | 0 | 0 | 0 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| - iddg_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | -| - vbus_valid_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 1 | 0 | -| - a_valid_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 1 | 0 | -| - b_valid_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 1 | 0 | -| - session_end_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 1 | 0 | -| - dedicated_fifos | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | -| - num_dev_in_eps | 7 | 6 | 4 | 7 | 3 | 5 | 5 | 5 | 8 | 8 | 8 | 5 | 8 | 8 | 6 | 0 | -| - dma_desc_enable | 0 | 0 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 1 | 1 | 1 | 0 | -| - dma_desc_dynamic | 0 | 0 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 1 | 1 | 1 | 0 | +| | BCM2711 (Pi4) | EFM32GG | ESP32-S2/S3 | ESP32-P4 | ST F207/F407/411/429 FS | ST F407/429 HS | ST F412/76x FS | ST F723/L4P5 FS | ST F723 HS | ST F76x HS | ST H743/H750 | ST L476 FS | ST U5A5/H7RS HS | XMC4500 | GD32VF103 | +|:---------------------------|:----------------|:-------------|:--------------|:-------------|:--------------------------|:-----------------|:-----------------|:------------------|:-------------|:-------------|:---------------|:-------------|:------------------|:-------------|:------------| +| GUID | 0x2708A000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00001200 | 0x00001100 | 0x00002000 | 0x00003000 | 0x00003100 | 0x00002100 | 0x00002300 | 0x00002000 | 0x00005000 | 0x00AEC000 | 0x00001000 | +| GSNPSID | 0x4F54280A | 0x4F54330A | 0x4F54400A | 0x4F54400A | 0x4F54281A | 0x4F54281A | 0x4F54320A | 0x4F54330A | 0x4F54330A | 0x4F54320A | 0x4F54330A | 0x4F54310A | 0x4F54411A | 0x4F54292A | 0x00000000 | +| - specs version | 2.80a | 3.30a | 4.00a | 4.00a | 2.81a | 2.81a | 3.20a | 3.30a | 3.30a | 3.20a | 3.30a | 3.10a | 4.11a | 2.92a | 0.00W | +| GHWCFG1 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | 0x00000000 | +| GHWCFG2 | 0x228DDD50 | 0x228F5910 | 0x224DD930 | 0x215FFFD0 | 0x229DCD20 | 0x229ED590 | 0x229ED520 | 0x229ED520 | 0x229FE1D0 | 0x229FE190 | 0x229FE190 | 0x229ED520 | 0x228FE052 | 0x228F5930 | 0x00000000 | +| - op_mode | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | HNP SRP | noHNP noSRP | HNP SRP | HNP SRP | +| - arch | DMA internal | DMA internal | DMA internal | DMA internal | Slave only | DMA internal | Slave only | Slave only | DMA internal | DMA internal | DMA internal | Slave only | DMA internal | DMA internal | Slave only | +| - single_point | hub | hub | n/a | hub | n/a | hub | n/a | n/a | hub | hub | hub | n/a | hub | n/a | hub | +| - hs_phy_type | UTMI+ | n/a | n/a | UTMI+/ULPI | n/a | ULPI | n/a | n/a | UTMI+/ULPI | ULPI | ULPI | n/a | UTMI+ | n/a | n/a | +| - fs_phy_type | Dedicated | Dedicated | Dedicated | Shared ULPI | Dedicated | Dedicated | Dedicated | Dedicated | Dedicated | Dedicated | Dedicated | Dedicated | n/a | Dedicated | n/a | +| - num_dev_ep | 7 | 6 | 6 | 15 | 3 | 5 | 5 | 5 | 8 | 8 | 8 | 5 | 8 | 6 | 0 | +| - num_host_ch | 7 | 13 | 7 | 15 | 7 | 11 | 11 | 11 | 15 | 15 | 15 | 11 | 15 | 13 | 0 | +| - period_channel_support | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | +| - enable_dynamic_fifo | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | +| - mul_proc_intrpt | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | +| - reserved21 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - nptx_q_depth | 8 | 8 | 4 | 4 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 2 | +| - ptx_q_depth | 8 | 8 | 8 | 4 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 2 | +| - token_q_depth | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 0 | +| - otg_enable_ic_usb | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| GHWCFG3 | 0x0FF000E8 | 0x01F204E8 | 0x00C804B5 | 0x03805EB5 | 0x020001E8 | 0x03F403E8 | 0x0200D1E8 | 0x0200D1E8 | 0x03EED2E8 | 0x03EED2E8 | 0x03B8D2E8 | 0x0200D1E8 | 0x03B882E8 | 0x027A01E5 | 0x00000000 | +| - xfer_size_width | 8 | 8 | 5 | 5 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 5 | 0 | +| - packet_size_width | 6 | 6 | 3 | 3 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 0 | +| - otg_enable | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | +| - i2c_enable | 0 | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | 1 | 0 | 1 | 0 | +| - vendor_ctrl_itf | 0 | 0 | 0 | 1 | 0 | 1 | 0 | 0 | 1 | 1 | 1 | 0 | 1 | 0 | 0 | +| - optional_feature_removed | 0 | 1 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - synch_reset | 0 | 0 | 0 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - otg_adp_support | 0 | 0 | 0 | 1 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | +| - otg_enable_hsic | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - battery_charger_support | 0 | 0 | 0 | 1 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | +| - lpm_mode | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 0 | +| - dfifo_depth | 4080 | 498 | 200 | 896 | 512 | 1012 | 512 | 512 | 1006 | 1006 | 952 | 512 | 952 | 634 | 0 | +| GHWCFG4 | 0x1FF00020 | 0x1BF08030 | 0xD3F0A030 | 0xDFF1A030 | 0x0FF08030 | 0x17F00030 | 0x17F08030 | 0x17F08030 | 0x23F00030 | 0x23F00030 | 0xE3F00030 | 0x17F08030 | 0xE2103E30 | 0xDBF08030 | 0x00000000 | +| - num_dev_period_in_ep | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - partial_powerdown | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | +| - ahb_freq_min | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | +| - hibernation | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - extended_hibernation | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - reserved8 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - enhanced_lpm_support1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | +| - service_interval_flow | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | +| - ipg_isoc_support | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | +| - acg_support | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | +| - enhanced_lpm_support | 0 | 0 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | +| - phy_data_width | 8 bit | 8/16 bit | 8/16 bit | 8/16 bit | 8/16 bit | 8 bit | 8/16 bit | 8/16 bit | 8 bit | 8 bit | 8 bit | 8/16 bit | 8 bit | 8/16 bit | 8 bit | +| - ctrl_ep_num | 0 | 0 | 0 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | +| - iddg_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | +| - vbus_valid_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | 0 | +| - a_valid_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | 0 | +| - b_valid_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | 0 | +| - session_end_filter | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | 1 | 0 | +| - dedicated_fifos | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0 | +| - num_dev_in_eps | 7 | 6 | 4 | 7 | 3 | 5 | 5 | 5 | 8 | 8 | 8 | 5 | 8 | 6 | 0 | +| - dma_desc_enable | 0 | 0 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 1 | 1 | 0 | +| - dma_desc_dynamic | 0 | 0 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 1 | 1 | 0 | diff --git a/src/portable/synopsys/dwc2/dwc2_info.py b/src/portable/synopsys/dwc2/dwc2_info.py index 6ab4e0641..3d7d16dcc 100755 --- a/src/portable/synopsys/dwc2/dwc2_info.py +++ b/src/portable/synopsys/dwc2/dwc2_info.py @@ -21,8 +21,7 @@ dwc2_reg_value = { 'ST F76x HS': [0x2100, 0x4F54320A, 0, 0x229FE190, 0x03EED2E8, 0x23F00030], 'ST H743/H750': [0x2300, 0x4F54330A, 0, 0x229FE190, 0x03B8D2E8, 0xE3F00030], 'ST L476 FS': [0x2000, 0x4F54310A, 0, 0x229ED520, 0x0200D1E8, 0x17F08030], - 'ST U5A5 HS': [0x5000, 0x4F54411A, 0, 0x228FE052, 0x03B882E8, 0xE2103E30], - 'ST H7S3 HS': [0x5000, 0x4F54411A, 0, 0x228FE052, 0x03B882E8, 0xE2103E30], + 'ST U5A5/H7RS HS': [0x5000, 0x4F54411A, 0, 0x228FE052, 0x03B882E8, 0xE2103E30], 'XMC4500': [0xAEC000, 0x4F54292A, 0, 0x228F5930, 0x027A01E5, 0xDBF08030], 'GD32VF103': [0x1000, 0, 0, 0, 0, 0], } -- cgit v1.3.1 From 76b7468c746af5ad8496e9ed512366af249f972f Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 12 Jun 2025 15:08:46 +0700 Subject: ci skip clang/iar build for stm32n6 add stm32-tcpp0203 driver as dependency for h7rs and n6 --- .github/workflows/ci_set_matrix.py | 3 +- .../stm32h7rs/boards/stm32h7s3nucleo/board.cmake | 11 +- hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/board.mk | 10 +- .../boards/stm32h7s3nucleo/tcpp0203/LICENSE.txt | 6 - .../stm32h7s3nucleo/tcpp0203/Release_Notes.html | 205 --- .../stm32h7s3nucleo/tcpp0203/_htmresc/favicon.png | Bin 4126 -> 0 bytes .../tcpp0203/_htmresc/mini-st_2020.css | 1703 -------------------- .../tcpp0203/_htmresc/st_logo_2020.png | Bin 7520 -> 0 bytes .../boards/stm32h7s3nucleo/tcpp0203/tcpp0203.c | 886 ---------- .../boards/stm32h7s3nucleo/tcpp0203/tcpp0203.h | 353 ---- .../boards/stm32h7s3nucleo/tcpp0203/tcpp0203_reg.c | 73 - .../boards/stm32h7s3nucleo/tcpp0203/tcpp0203_reg.h | 98 -- hw/bsp/stm32h7rs/family.cmake | 3 + hw/bsp/stm32h7rs/family.mk | 3 + hw/bsp/stm32n6/boards/stm32n657nucleo/board.cmake | 8 +- hw/bsp/stm32n6/boards/stm32n657nucleo/board.mk | 6 +- .../boards/stm32n657nucleo/tcpp0203/LICENSE.txt | 6 - .../stm32n657nucleo/tcpp0203/Release_Notes.html | 205 --- .../stm32n657nucleo/tcpp0203/_htmresc/favicon.png | Bin 4126 -> 0 bytes .../tcpp0203/_htmresc/mini-st_2020.css | 1703 -------------------- .../tcpp0203/_htmresc/st_logo_2020.png | Bin 7520 -> 0 bytes .../boards/stm32n657nucleo/tcpp0203/tcpp0203.c | 886 ---------- .../boards/stm32n657nucleo/tcpp0203/tcpp0203.h | 353 ---- .../boards/stm32n657nucleo/tcpp0203/tcpp0203_reg.c | 73 - .../boards/stm32n657nucleo/tcpp0203/tcpp0203_reg.h | 98 -- hw/bsp/stm32n6/family.cmake | 1 + hw/bsp/stm32n6/family.mk | 1 + tools/get_deps.py | 3 + 28 files changed, 25 insertions(+), 6672 deletions(-) delete mode 100644 hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/LICENSE.txt delete mode 100644 hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/Release_Notes.html delete mode 100644 hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/_htmresc/favicon.png delete mode 100644 hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/_htmresc/mini-st_2020.css delete mode 100644 hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/_htmresc/st_logo_2020.png delete mode 100644 hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/tcpp0203.c delete mode 100644 hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/tcpp0203.h delete mode 100644 hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/tcpp0203_reg.c delete mode 100644 hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/tcpp0203_reg.h delete mode 100644 hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/LICENSE.txt delete mode 100644 hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/Release_Notes.html delete mode 100644 hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/_htmresc/favicon.png delete mode 100644 hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/_htmresc/mini-st_2020.css delete mode 100644 hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/_htmresc/st_logo_2020.png delete mode 100644 hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/tcpp0203.c delete mode 100644 hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/tcpp0203.h delete mode 100644 hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/tcpp0203_reg.c delete mode 100644 hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/tcpp0203_reg.h (limited to '.github') diff --git a/.github/workflows/ci_set_matrix.py b/.github/workflows/ci_set_matrix.py index 048c5f0ce..ddb3ee1fb 100755 --- a/.github/workflows/ci_set_matrix.py +++ b/.github/workflows/ci_set_matrix.py @@ -41,7 +41,8 @@ family_list = { "stm32f7": ["arm-gcc", "arm-clang", "arm-iar"], "stm32g0 stm32g4 stm32h5": ["arm-gcc", "arm-clang", "arm-iar"], "stm32h7 stm32h7rs": ["arm-gcc", "arm-clang", "arm-iar"], - "stm32l0 stm32l4 stm32n6": ["arm-gcc", "arm-clang", "arm-iar"], + "stm32l0 stm32l4": ["arm-gcc", "arm-clang", "arm-iar"], + "stm32n6": ["arm-gcc"], "stm32u5 stm32wb": ["arm-gcc", "arm-clang", "arm-iar"], "xmc4000": ["arm-gcc"], "-bespressif_s2_devkitc": ["esp-idf"], diff --git a/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/board.cmake b/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/board.cmake index ea9ffacf4..f52b70408 100644 --- a/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/board.cmake +++ b/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/board.cmake @@ -6,19 +6,14 @@ set(LD_FILE_Clang ${LD_FILE_GNU}) set(LD_FILE_IAR ${CMAKE_CURRENT_LIST_DIR}/stm32h7s3xx_flash.icf) function(update_board TARGET) - target_compile_definitions(${TARGET} PUBLIC STM32H7S3xx - SEGGER_RTT_SECTION="noncacheable_buffer" - BUFFER_SIZE_UP=0x3000 ) - target_sources(${TARGET} PUBLIC - # BSP - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/tcpp0203/tcpp0203.c - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/tcpp0203/tcpp0203_reg.c + ${ST_TCPP0203}/tcpp0203.c + ${ST_TCPP0203}/tcpp0203_reg.c ) target_include_directories(${TARGET} PUBLIC - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/tcpp0203 + ${ST_TCPP0203} ) endfunction() diff --git a/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/board.mk b/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/board.mk index 1946f523c..cf0c2ff54 100644 --- a/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/board.mk +++ b/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/board.mk @@ -12,12 +12,8 @@ LD_FILE_GCC = $(BOARD_PATH)/stm32h7s3xx_flash.ld LD_FILE_IAR = $(BOARD_PATH)/stm32h7s3xx_flash.icf SRC_C += \ - $(BOARD_PATH)/tcpp0203/tcpp0203.c \ - $(BOARD_PATH)/tcpp0203/tcpp0203_reg.c \ + $(ST_TCPP0203)/tcpp0203.c \ + $(ST_TCPP0203)/tcpp0203_reg.c \ INC += \ - $(TOP)/$(BOARD_PATH)/tcpp0203 \ - -CFLAGS += \ - -DSEGGER_RTT_SECTION=\"noncacheable_buffer\" \ - -DBUFFER_SIZE_UP=0x3000 \ + $(TOP)/$(ST_TCPP0203) \ diff --git a/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/LICENSE.txt b/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/LICENSE.txt deleted file mode 100644 index 1cbbc544a..000000000 --- a/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/LICENSE.txt +++ /dev/null @@ -1,6 +0,0 @@ -This software component is provided to you as part of a software package and -applicable license terms are in the Package_license file. If you received this -software component outside of a package or without applicable license terms, -the terms of the BSD-3-Clause license shall apply. -You may obtain a copy of the BSD-3-Clause at: -https://opensource.org/licenses/BSD-3-Clause diff --git a/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/Release_Notes.html b/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/Release_Notes.html deleted file mode 100644 index 6bbba86a4..000000000 --- a/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/Release_Notes.html +++ /dev/null @@ -1,205 +0,0 @@ - - - - - - - Release Notes for TCPP0203 Component Driver - - - - - - -
-
-
-

Release Notes for TCPP0203 Component Driver

-

Copyright © 2020 STMicroelectronics
-

- -
-

Purpose

-

This driver provides a set of functions needed to drive TCPP0203 Type-C Port Protection component

-
-
-

Update History

-
- -
-

Main Changes

-

Maintenance release

-

Contents

- - - - - - - - - - - -
Headline
MISRA Rule-81.13 correction on TCPP0203 component driver files
-

Backward compatibility

-

No compatibility break with previous version

-

Dependencies

-
-
-
- -
-

Main Changes

-

Maintenance release

-

Contents

- - - - - - - - - - - - -
Fixed bugs list
Headline
MISRA corrections on TCPP0203 component driver files
-

Known Limitations

-

Outstanding bugs list : None

-

Requirements not met or planned in a forthcoming release : None

-

Development Toolchains and Compilers

-
    -
  • IAR Embedded Workbench for ARM (EWARM) toolchain V8.32.3
    • -
  • RealView Microcontroller Development Kit (MDK-ARM) toolchain V5.27.1
    • -
  • STM32CubeIDE toolchain V1.8.0
    • -
-

Backward compatibility

-

No compatibility break with previous version

-

Dependencies

-
-
-
- -
-

Main Changes

-

Maintenance release

-

Contents

- - - - - - - - - - - - -
Fixed bugs list
Headline
License updates
-

Known Limitations

-

Outstanding bugs list : None

-

Requirements not met or planned in a forthcoming release : None

-

Development Toolchains and Compilers

-
    -
  • IAR Embedded Workbench for ARM (EWARM) toolchain V8.32.3
    • -
  • RealView Microcontroller Development Kit (MDK-ARM) toolchain V5.27.1
    • -
  • STM32CubeIDE toolchain V1.6.0
    • -
-

Backward compatibility

-

No compatibility break with previous version

-

Dependencies

-
-
-
- -
-

Main Changes

-

Maintenance release

-

Contents

- - - - - - - - - - - - -
Fixed bugs list
Headline
CodeSpell correction on TCPP0203 component driver files
-

Known Limitations

-

Outstanding bugs list : None

-

Requirements not met or planned in a forthcoming release : None

-

Development Toolchains and Compilers

-
    -
  • IAR Embedded Workbench for ARM (EWARM) toolchain V8.32.3
    • -
  • RealView Microcontroller Development Kit (MDK-ARM) toolchain V5.27.1
    • -
  • STM32CubeIDE toolchain V1.5.0
    • -
-

Backward compatibility

-

No compatibility break with previous version

-

Dependencies

-
-
-
- -
-

Main Changes

-

Maintenance release

-

Contents

- - - - - - - - - - - - -
Fixed bugs list
Headline
MCUAstyle correction on TCPP0203 component driver files
-

Known Limitations

-

Outstanding bugs list : None

-

Requirements not met or planned in a forthcoming release : None

-

Development Toolchains and Compilers

-
    -
  • IAR Embedded Workbench for ARM (EWARM) toolchain V8.32.3
    • -
  • RealView Microcontroller Development Kit (MDK-ARM) toolchain V5.27.1
    • -
  • STM32CubeIDE toolchain V1.5.0
    • -
-

Backward compatibility

-

No compatibility break with previous version

-

Dependencies

-
-
-
- -
-

Main Changes

-
    -
  • First official release of TCPP0203 Type-C port Protection Component drivers
    • -
-
-
-
-
-
-

For complete documentation on STM32,visit: [www.st.com/stm32]

-This release note uses up to date web standards and, for this reason, should not be opened with Internet Explorer but preferably with popular browsers such as Google Chrome, Mozilla Firefox, Opera or Microsoft Edge. -
- - diff --git a/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/_htmresc/favicon.png b/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/_htmresc/favicon.png deleted file mode 100644 index 06713eec4..000000000 Binary files a/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/_htmresc/favicon.png and /dev/null differ diff --git a/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/_htmresc/mini-st_2020.css b/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/_htmresc/mini-st_2020.css deleted file mode 100644 index dd19969d1..000000000 --- a/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/_htmresc/mini-st_2020.css +++ /dev/null @@ -1,1703 +0,0 @@ -@charset "UTF-8"; -/* - Flavor name: Custom (mini-custom) - Generated online - https://minicss.org/flavors - mini.css version: v3.0.1 -*/ -/* - Browsers resets and base typography. -*/ -/* Core module CSS variable definitions */ -:root { - --fore-color: #03234b; - --secondary-fore-color: #03234b; - --back-color: #ffffff; - --secondary-back-color: #ffffff; - --blockquote-color: #e6007e; - --pre-color: #e6007e; - --border-color: #3cb4e6; - --secondary-border-color: #3cb4e6; - --heading-ratio: 1.2; - --universal-margin: 0.5rem; - --universal-padding: 0.25rem; - --universal-border-radius: 0.075rem; - --background-margin: 1.5%; - --a-link-color: #3cb4e6; - --a-visited-color: #8c0078; } - -html { - font-size: 13.5px; } - -a, b, del, em, i, ins, q, span, strong, u { - font-size: 1em; } - -html, * { - font-family: -apple-system, BlinkMacSystemFont, Helvetica, arial, sans-serif; - line-height: 1.25; - -webkit-text-size-adjust: 100%; } - -* { - font-size: 1rem; } - -body { - margin: 0; - color: var(--fore-color); - @background: var(--back-color); - background: var(--back-color) linear-gradient(#ffd200, #ffd200) repeat-y left top; - background-size: var(--background-margin); - } - -details { - display: block; } - -summary { - display: list-item; } - -abbr[title] { - border-bottom: none; - text-decoration: underline dotted; } - -input { - overflow: visible; } - -img { - max-width: 100%; - height: auto; } - -h1, h2, h3, h4, h5, h6 { - line-height: 1.25; - margin: calc(1.5 * var(--universal-margin)) var(--universal-margin); - font-weight: 400; } - h1 small, h2 small, h3 small, h4 small, h5 small, h6 small { - color: var(--secondary-fore-color); - display: block; - margin-top: -0.25rem; } - -h1 { - font-size: calc(1rem * var(--heading-ratio) * var(--heading-ratio) * var(--heading-ratio)); } - -h2 { - font-size: calc(1rem * var(--heading-ratio) * var(--heading-ratio) ); - border-style: none none solid none ; - border-width: thin; - border-color: var(--border-color); } -h3 { - font-size: calc(1rem * var(--heading-ratio) ); } - -h4 { - font-size: calc(1rem * var(--heading-ratio)); } - -h5 { - font-size: 1rem; } - -h6 { - font-size: calc(1rem / var(--heading-ratio)); } - -p { - margin: var(--universal-margin); } - -ol, ul { - margin: var(--universal-margin); - padding-left: calc(3 * var(--universal-margin)); } - -b, strong { - font-weight: 700; } - -hr { - box-sizing: content-box; - border: 0; - line-height: 1.25em; - margin: var(--universal-margin); - height: 0.0714285714rem; - background: linear-gradient(to right, transparent, var(--border-color) 20%, var(--border-color) 80%, transparent); } - -blockquote { - display: block; - position: relative; - font-style: italic; - color: var(--secondary-fore-color); - margin: var(--universal-margin); - padding: calc(3 * var(--universal-padding)); - border: 0.0714285714rem solid var(--secondary-border-color); - border-left: 0.3rem solid var(--blockquote-color); - border-radius: 0 var(--universal-border-radius) var(--universal-border-radius) 0; } - blockquote:before { - position: absolute; - top: calc(0rem - var(--universal-padding)); - left: 0; - font-family: sans-serif; - font-size: 2rem; - font-weight: 800; - content: "\201c"; - color: var(--blockquote-color); } - blockquote[cite]:after { - font-style: normal; - font-size: 0.75em; - font-weight: 700; - content: "\a— " attr(cite); - white-space: pre; } - -code, kbd, pre, samp { - font-family: Menlo, Consolas, monospace; - font-size: 0.85em; } - -code { - background: var(--secondary-back-color); - border-radius: var(--universal-border-radius); - padding: calc(var(--universal-padding) / 4) calc(var(--universal-padding) / 2); } - -kbd { - background: var(--fore-color); - color: var(--back-color); - border-radius: var(--universal-border-radius); - padding: calc(var(--universal-padding) / 4) calc(var(--universal-padding) / 2); } - -pre { - overflow: auto; - background: var(--secondary-back-color); - padding: calc(1.5 * var(--universal-padding)); - margin: var(--universal-margin); - border: 0.0714285714rem solid var(--secondary-border-color); - border-left: 0.2857142857rem solid var(--pre-color); - border-radius: 0 var(--universal-border-radius) var(--universal-border-radius) 0; } - -sup, sub, code, kbd { - line-height: 0; - position: relative; - vertical-align: baseline; } - -small, sup, sub, figcaption { - font-size: 0.75em; } - -sup { - top: -0.5em; } - -sub { - bottom: -0.25em; } - -figure { - margin: var(--universal-margin); } - -figcaption { - color: var(--secondary-fore-color); } - -a { - text-decoration: none; } - a:link { - color: var(--a-link-color); } - a:visited { - color: var(--a-visited-color); } - a:hover, a:focus { - text-decoration: underline; } - -/* - Definitions for the grid system, cards and containers. -*/ -.container { - margin: 0 auto; - padding: 0 calc(1.5 * var(--universal-padding)); } - -.row { - box-sizing: border-box; - display: flex; - flex: 0 1 auto; - flex-flow: row wrap; - margin: 0 0 0 var(--background-margin); } - -.col-sm, -[class^='col-sm-'], -[class^='col-sm-offset-'], -.row[class*='cols-sm-'] > * { - box-sizing: border-box; - flex: 0 0 auto; - padding: 0 calc(var(--universal-padding) / 2); } - -.col-sm, -.row.cols-sm > * { - max-width: 100%; - flex-grow: 1; - flex-basis: 0; } - -.col-sm-1, -.row.cols-sm-1 > * { - max-width: 8.3333333333%; - flex-basis: 8.3333333333%; } - -.col-sm-offset-0 { - margin-left: 0; } - -.col-sm-2, -.row.cols-sm-2 > * { - max-width: 16.6666666667%; - flex-basis: 16.6666666667%; } - -.col-sm-offset-1 { - margin-left: 8.3333333333%; } - -.col-sm-3, -.row.cols-sm-3 > * { - max-width: 25%; - flex-basis: 25%; } - -.col-sm-offset-2 { - margin-left: 16.6666666667%; } - -.col-sm-4, -.row.cols-sm-4 > * { - max-width: 33.3333333333%; - flex-basis: 33.3333333333%; } - -.col-sm-offset-3 { - margin-left: 25%; } - -.col-sm-5, -.row.cols-sm-5 > * { - max-width: 41.6666666667%; - flex-basis: 41.6666666667%; } - -.col-sm-offset-4 { - margin-left: 33.3333333333%; } - -.col-sm-6, -.row.cols-sm-6 > * { - max-width: 50%; - flex-basis: 50%; } - -.col-sm-offset-5 { - margin-left: 41.6666666667%; } - -.col-sm-7, -.row.cols-sm-7 > * { - max-width: 58.3333333333%; - flex-basis: 58.3333333333%; } - -.col-sm-offset-6 { - margin-left: 50%; } - -.col-sm-8, -.row.cols-sm-8 > * { - max-width: 66.6666666667%; - flex-basis: 66.6666666667%; } - -.col-sm-offset-7 { - margin-left: 58.3333333333%; } - -.col-sm-9, -.row.cols-sm-9 > * { - max-width: 75%; - flex-basis: 75%; } - -.col-sm-offset-8 { - margin-left: 66.6666666667%; } - -.col-sm-10, -.row.cols-sm-10 > * { - max-width: 83.3333333333%; - flex-basis: 83.3333333333%; } - -.col-sm-offset-9 { - margin-left: 75%; } - -.col-sm-11, -.row.cols-sm-11 > * { - max-width: 91.6666666667%; - flex-basis: 91.6666666667%; } - -.col-sm-offset-10 { - margin-left: 83.3333333333%; } - -.col-sm-12, -.row.cols-sm-12 > * { - max-width: 100%; - flex-basis: 100%; } - -.col-sm-offset-11 { - margin-left: 91.6666666667%; } - -.col-sm-normal { - order: initial; } - -.col-sm-first { - order: -999; } - -.col-sm-last { - order: 999; } - -@media screen and (min-width: 500px) { - .col-md, - [class^='col-md-'], - [class^='col-md-offset-'], - .row[class*='cols-md-'] > * { - box-sizing: border-box; - flex: 0 0 auto; - padding: 0 calc(var(--universal-padding) / 2); } - - .col-md, - .row.cols-md > * { - max-width: 100%; - flex-grow: 1; - flex-basis: 0; } - - .col-md-1, - .row.cols-md-1 > * { - max-width: 8.3333333333%; - flex-basis: 8.3333333333%; } - - .col-md-offset-0 { - margin-left: 0; } - - .col-md-2, - .row.cols-md-2 > * { - max-width: 16.6666666667%; - flex-basis: 16.6666666667%; } - - .col-md-offset-1 { - margin-left: 8.3333333333%; } - - .col-md-3, - .row.cols-md-3 > * { - max-width: 25%; - flex-basis: 25%; } - - .col-md-offset-2 { - margin-left: 16.6666666667%; } - - .col-md-4, - .row.cols-md-4 > * { - max-width: 33.3333333333%; - flex-basis: 33.3333333333%; } - - .col-md-offset-3 { - margin-left: 25%; } - - .col-md-5, - .row.cols-md-5 > * { - max-width: 41.6666666667%; - flex-basis: 41.6666666667%; } - - .col-md-offset-4 { - margin-left: 33.3333333333%; } - - .col-md-6, - .row.cols-md-6 > * { - max-width: 50%; - flex-basis: 50%; } - - .col-md-offset-5 { - margin-left: 41.6666666667%; } - - .col-md-7, - .row.cols-md-7 > * { - max-width: 58.3333333333%; - flex-basis: 58.3333333333%; } - - .col-md-offset-6 { - margin-left: 50%; } - - .col-md-8, - .row.cols-md-8 > * { - max-width: 66.6666666667%; - flex-basis: 66.6666666667%; } - - .col-md-offset-7 { - margin-left: 58.3333333333%; } - - .col-md-9, - .row.cols-md-9 > * { - max-width: 75%; - flex-basis: 75%; } - - .col-md-offset-8 { - margin-left: 66.6666666667%; } - - .col-md-10, - .row.cols-md-10 > * { - max-width: 83.3333333333%; - flex-basis: 83.3333333333%; } - - .col-md-offset-9 { - margin-left: 75%; } - - .col-md-11, - .row.cols-md-11 > * { - max-width: 91.6666666667%; - flex-basis: 91.6666666667%; } - - .col-md-offset-10 { - margin-left: 83.3333333333%; } - - .col-md-12, - .row.cols-md-12 > * { - max-width: 100%; - flex-basis: 100%; } - - .col-md-offset-11 { - margin-left: 91.6666666667%; } - - .col-md-normal { - order: initial; } - - .col-md-first { - order: -999; } - - .col-md-last { - order: 999; } } -@media screen and (min-width: 1280px) { - .col-lg, - [class^='col-lg-'], - [class^='col-lg-offset-'], - .row[class*='cols-lg-'] > * { - box-sizing: border-box; - flex: 0 0 auto; - padding: 0 calc(var(--universal-padding) / 2); } - - .col-lg, - .row.cols-lg > * { - max-width: 100%; - flex-grow: 1; - flex-basis: 0; } - - .col-lg-1, - .row.cols-lg-1 > * { - max-width: 8.3333333333%; - flex-basis: 8.3333333333%; } - - .col-lg-offset-0 { - margin-left: 0; } - - .col-lg-2, - .row.cols-lg-2 > * { - max-width: 16.6666666667%; - flex-basis: 16.6666666667%; } - - .col-lg-offset-1 { - margin-left: 8.3333333333%; } - - .col-lg-3, - .row.cols-lg-3 > * { - max-width: 25%; - flex-basis: 25%; } - - .col-lg-offset-2 { - margin-left: 16.6666666667%; } - - .col-lg-4, - .row.cols-lg-4 > * { - max-width: 33.3333333333%; - flex-basis: 33.3333333333%; } - - .col-lg-offset-3 { - margin-left: 25%; } - - .col-lg-5, - .row.cols-lg-5 > * { - max-width: 41.6666666667%; - flex-basis: 41.6666666667%; } - - .col-lg-offset-4 { - margin-left: 33.3333333333%; } - - .col-lg-6, - .row.cols-lg-6 > * { - max-width: 50%; - flex-basis: 50%; } - - .col-lg-offset-5 { - margin-left: 41.6666666667%; } - - .col-lg-7, - .row.cols-lg-7 > * { - max-width: 58.3333333333%; - flex-basis: 58.3333333333%; } - - .col-lg-offset-6 { - margin-left: 50%; } - - .col-lg-8, - .row.cols-lg-8 > * { - max-width: 66.6666666667%; - flex-basis: 66.6666666667%; } - - .col-lg-offset-7 { - margin-left: 58.3333333333%; } - - .col-lg-9, - .row.cols-lg-9 > * { - max-width: 75%; - flex-basis: 75%; } - - .col-lg-offset-8 { - margin-left: 66.6666666667%; } - - .col-lg-10, - .row.cols-lg-10 > * { - max-width: 83.3333333333%; - flex-basis: 83.3333333333%; } - - .col-lg-offset-9 { - margin-left: 75%; } - - .col-lg-11, - .row.cols-lg-11 > * { - max-width: 91.6666666667%; - flex-basis: 91.6666666667%; } - - .col-lg-offset-10 { - margin-left: 83.3333333333%; } - - .col-lg-12, - .row.cols-lg-12 > * { - max-width: 100%; - flex-basis: 100%; } - - .col-lg-offset-11 { - margin-left: 91.6666666667%; } - - .col-lg-normal { - order: initial; } - - .col-lg-first { - order: -999; } - - .col-lg-last { - order: 999; } } -/* Card component CSS variable definitions */ -:root { - --card-back-color: #3cb4e6; - --card-fore-color: #03234b; - --card-border-color: #03234b; } - -.card { - display: flex; - flex-direction: column; - justify-content: space-between; - align-self: center; - position: relative; - width: 100%; - background: var(--card-back-color); - color: var(--card-fore-color); - border: 0.0714285714rem solid var(--card-border-color); - border-radius: var(--universal-border-radius); - margin: var(--universal-margin); - overflow: hidden; } - @media screen and (min-width: 320px) { - .card { - max-width: 320px; } } - .card > .sectione { - background: var(--card-back-color); - color: var(--card-fore-color); - box-sizing: border-box; - margin: 0; - border: 0; - border-radius: 0; - border-bottom: 0.0714285714rem solid var(--card-border-color); - padding: var(--universal-padding); - width: 100%; } - .card > .sectione.media { - height: 200px; - padding: 0; - -o-object-fit: cover; - object-fit: cover; } - .card > .sectione:last-child { - border-bottom: 0; } - -/* - Custom elements for card elements. -*/ -@media screen and (min-width: 240px) { - .card.small { - max-width: 240px; } } -@media screen and (min-width: 480px) { - .card.large { - max-width: 480px; } } -.card.fluid { - max-width: 100%; - width: auto; } - -.card.warning { - --card-back-color: #e5b8b7; - --card-fore-color: #3b234b; - --card-border-color: #8c0078; } - -.card.error { - --card-back-color: #464650; - --card-fore-color: #ffffff; - --card-border-color: #8c0078; } - -.card > .sectione.dark { - --card-back-color: #3b234b; - --card-fore-color: #ffffff; } - -.card > .sectione.double-padded { - padding: calc(1.5 * var(--universal-padding)); } - -/* - Definitions for forms and input elements. -*/ -/* Input_control module CSS variable definitions */ -:root { - --form-back-color: #ffe97f; - --form-fore-color: #03234b; - --form-border-color: #3cb4e6; - --input-back-color: #ffffff; - --input-fore-color: #03234b; - --input-border-color: #3cb4e6; - --input-focus-color: #0288d1; - --input-invalid-color: #d32f2f; - --button-back-color: #e2e2e2; - --button-hover-back-color: #dcdcdc; - --button-fore-color: #212121; - --button-border-color: transparent; - --button-hover-border-color: transparent; - --button-group-border-color: rgba(124, 124, 124, 0.54); } - -form { - background: var(--form-back-color); - color: var(--form-fore-color); - border: 0.0714285714rem solid var(--form-border-color); - border-radius: var(--universal-border-radius); - margin: var(--universal-margin); - padding: calc(2 * var(--universal-padding)) var(--universal-padding); } - -fieldset { - border: 0.0714285714rem solid var(--form-border-color); - border-radius: var(--universal-border-radius); - margin: calc(var(--universal-margin) / 4); - padding: var(--universal-padding); } - -legend { - box-sizing: border-box; - display: table; - max-width: 100%; - white-space: normal; - font-weight: 500; - padding: calc(var(--universal-padding) / 2); } - -label { - padding: calc(var(--universal-padding) / 2) var(--universal-padding); } - -.input-group { - display: inline-block; } - .input-group.fluid { - display: flex; - align-items: center; - justify-content: center; } - .input-group.fluid > input { - max-width: 100%; - flex-grow: 1; - flex-basis: 0px; } - @media screen and (max-width: 499px) { - .input-group.fluid { - align-items: stretch; - flex-direction: column; } } - .input-group.vertical { - display: flex; - align-items: stretch; - flex-direction: column; } - .input-group.vertical > input { - max-width: 100%; - flex-grow: 1; - flex-basis: 0px; } - -[type="number"]::-webkit-inner-spin-button, [type="number"]::-webkit-outer-spin-button { - height: auto; } - -[type="search"] { - -webkit-appearance: textfield; - outline-offset: -2px; } - -[type="search"]::-webkit-search-cancel-button, -[type="search"]::-webkit-search-decoration { - -webkit-appearance: none; } - -input:not([type]), [type="text"], [type="email"], [type="number"], [type="search"], -[type="password"], [type="url"], [type="tel"], [type="checkbox"], [type="radio"], textarea, select { - box-sizing: border-box; - background: var(--input-back-color); - color: var(--input-fore-color); - border: 0.0714285714rem solid var(--input-border-color); - border-radius: var(--universal-border-radius); - margin: calc(var(--universal-margin) / 2); - padding: var(--universal-padding) calc(1.5 * var(--universal-padding)); } - -input:not([type="button"]):not([type="submit"]):not([type="reset"]):hover, input:not([type="button"]):not([type="submit"]):not([type="reset"]):focus, textarea:hover, textarea:focus, select:hover, select:focus { - border-color: var(--input-focus-color); - box-shadow: none; } -input:not([type="button"]):not([type="submit"]):not([type="reset"]):invalid, input:not([type="button"]):not([type="submit"]):not([type="reset"]):focus:invalid, textarea:invalid, textarea:focus:invalid, select:invalid, select:focus:invalid { - border-color: var(--input-invalid-color); - box-shadow: none; } -input:not([type="button"]):not([type="submit"]):not([type="reset"])[readonly], textarea[readonly], select[readonly] { - background: var(--secondary-back-color); } - -select { - max-width: 100%; } - -option { - overflow: hidden; - text-overflow: ellipsis; } - -[type="checkbox"], [type="radio"] { - -webkit-appearance: none; - -moz-appearance: none; - appearance: none; - position: relative; - height: calc(1rem + var(--universal-padding) / 2); - width: calc(1rem + var(--universal-padding) / 2); - vertical-align: text-bottom; - padding: 0; - flex-basis: calc(1rem + var(--universal-padding) / 2) !important; - flex-grow: 0 !important; } - [type="checkbox"]:checked:before, [type="radio"]:checked:before { - position: absolute; } - -[type="checkbox"]:checked:before { - content: '\2713'; - font-family: sans-serif; - font-size: calc(1rem + var(--universal-padding) / 2); - top: calc(0rem - var(--universal-padding)); - left: calc(var(--universal-padding) / 4); } - -[type="radio"] { - border-radius: 100%; } - [type="radio"]:checked:before { - border-radius: 100%; - content: ''; - top: calc(0.0714285714rem + var(--universal-padding) / 2); - left: calc(0.0714285714rem + var(--universal-padding) / 2); - background: var(--input-fore-color); - width: 0.5rem; - height: 0.5rem; } - -:placeholder-shown { - color: var(--input-fore-color); } - -::-ms-placeholder { - color: var(--input-fore-color); - opacity: 0.54; } - -button::-moz-focus-inner, [type="button"]::-moz-focus-inner, [type="reset"]::-moz-focus-inner, [type="submit"]::-moz-focus-inner { - border-style: none; - padding: 0; } - -button, html [type="button"], [type="reset"], [type="submit"] { - -webkit-appearance: button; } - -button { - overflow: visible; - text-transform: none; } - -button, [type="button"], [type="submit"], [type="reset"], -a.button, label.button, .button, -a[role="button"], label[role="button"], [role="button"] { - display: inline-block; - background: var(--button-back-color); - color: var(--button-fore-color); - border: 0.0714285714rem solid var(--button-border-color); - border-radius: var(--universal-border-radius); - padding: var(--universal-padding) calc(1.5 * var(--universal-padding)); - margin: var(--universal-margin); - text-decoration: none; - cursor: pointer; - transition: background 0.3s; } - button:hover, button:focus, [type="button"]:hover, [type="button"]:focus, [type="submit"]:hover, [type="submit"]:focus, [type="reset"]:hover, [type="reset"]:focus, - a.button:hover, - a.button:focus, label.button:hover, label.button:focus, .button:hover, .button:focus, - a[role="button"]:hover, - a[role="button"]:focus, label[role="button"]:hover, label[role="button"]:focus, [role="button"]:hover, [role="button"]:focus { - background: var(--button-hover-back-color); - border-color: var(--button-hover-border-color); } - -input:disabled, input[disabled], textarea:disabled, textarea[disabled], select:disabled, select[disabled], button:disabled, button[disabled], .button:disabled, .button[disabled], [role="button"]:disabled, [role="button"][disabled] { - cursor: not-allowed; - opacity: 0.75; } - -.button-group { - display: flex; - border: 0.0714285714rem solid var(--button-group-border-color); - border-radius: var(--universal-border-radius); - margin: var(--universal-margin); } - .button-group > button, .button-group [type="button"], .button-group > [type="submit"], .button-group > [type="reset"], .button-group > .button, .button-group > [role="button"] { - margin: 0; - max-width: 100%; - flex: 1 1 auto; - text-align: center; - border: 0; - border-radius: 0; - box-shadow: none; } - .button-group > :not(:first-child) { - border-left: 0.0714285714rem solid var(--button-group-border-color); } - @media screen and (max-width: 499px) { - .button-group { - flex-direction: column; } - .button-group > :not(:first-child) { - border: 0; - border-top: 0.0714285714rem solid var(--button-group-border-color); } } - -/* - Custom elements for forms and input elements. -*/ -button.primary, [type="button"].primary, [type="submit"].primary, [type="reset"].primary, .button.primary, [role="button"].primary { - --button-back-color: #1976d2; - --button-fore-color: #f8f8f8; } - button.primary:hover, button.primary:focus, [type="button"].primary:hover, [type="button"].primary:focus, [type="submit"].primary:hover, [type="submit"].primary:focus, [type="reset"].primary:hover, [type="reset"].primary:focus, .button.primary:hover, .button.primary:focus, [role="button"].primary:hover, [role="button"].primary:focus { - --button-hover-back-color: #1565c0; } - -button.secondary, [type="button"].secondary, [type="submit"].secondary, [type="reset"].secondary, .button.secondary, [role="button"].secondary { - --button-back-color: #d32f2f; - --button-fore-color: #f8f8f8; } - button.secondary:hover, button.secondary:focus, [type="button"].secondary:hover, [type="button"].secondary:focus, [type="submit"].secondary:hover, [type="submit"].secondary:focus, [type="reset"].secondary:hover, [type="reset"].secondary:focus, .button.secondary:hover, .button.secondary:focus, [role="button"].secondary:hover, [role="button"].secondary:focus { - --button-hover-back-color: #c62828; } - -button.tertiary, [type="button"].tertiary, [type="submit"].tertiary, [type="reset"].tertiary, .button.tertiary, [role="button"].tertiary { - --button-back-color: #308732; - --button-fore-color: #f8f8f8; } - button.tertiary:hover, button.tertiary:focus, [type="button"].tertiary:hover, [type="button"].tertiary:focus, [type="submit"].tertiary:hover, [type="submit"].tertiary:focus, [type="reset"].tertiary:hover, [type="reset"].tertiary:focus, .button.tertiary:hover, .button.tertiary:focus, [role="button"].tertiary:hover, [role="button"].tertiary:focus { - --button-hover-back-color: #277529; } - -button.inverse, [type="button"].inverse, [type="submit"].inverse, [type="reset"].inverse, .button.inverse, [role="button"].inverse { - --button-back-color: #212121; - --button-fore-color: #f8f8f8; } - button.inverse:hover, button.inverse:focus, [type="button"].inverse:hover, [type="button"].inverse:focus, [type="submit"].inverse:hover, [type="submit"].inverse:focus, [type="reset"].inverse:hover, [type="reset"].inverse:focus, .button.inverse:hover, .button.inverse:focus, [role="button"].inverse:hover, [role="button"].inverse:focus { - --button-hover-back-color: #111; } - -button.small, [type="button"].small, [type="submit"].small, [type="reset"].small, .button.small, [role="button"].small { - padding: calc(0.5 * var(--universal-padding)) calc(0.75 * var(--universal-padding)); - margin: var(--universal-margin); } - -button.large, [type="button"].large, [type="submit"].large, [type="reset"].large, .button.large, [role="button"].large { - padding: calc(1.5 * var(--universal-padding)) calc(2 * var(--universal-padding)); - margin: var(--universal-margin); } - -/* - Definitions for navigation elements. -*/ -/* Navigation module CSS variable definitions */ -:root { - --header-back-color: #03234b; - --header-hover-back-color: #ffd200; - --header-fore-color: #ffffff; - --header-border-color: #3cb4e6; - --nav-back-color: #ffffff; - --nav-hover-back-color: #ffe97f; - --nav-fore-color: #e6007e; - --nav-border-color: #3cb4e6; - --nav-link-color: #3cb4e6; - --footer-fore-color: #ffffff; - --footer-back-color: #03234b; - --footer-border-color: #3cb4e6; - --footer-link-color: #3cb4e6; - --drawer-back-color: #ffffff; - --drawer-hover-back-color: #ffe97f; - --drawer-border-color: #3cb4e6; - --drawer-close-color: #e6007e; } - -header { - height: 2.75rem; - background: var(--header-back-color); - color: var(--header-fore-color); - border-bottom: 0.0714285714rem solid var(--header-border-color); - padding: calc(var(--universal-padding) / 4) 0; - white-space: nowrap; - overflow-x: auto; - overflow-y: hidden; } - header.row { - box-sizing: content-box; } - header .logo { - color: var(--header-fore-color); - font-size: 1.75rem; - padding: var(--universal-padding) calc(2 * var(--universal-padding)); - text-decoration: none; } - header button, header [type="button"], header .button, header [role="button"] { - box-sizing: border-box; - position: relative; - top: calc(0rem - var(--universal-padding) / 4); - height: calc(3.1875rem + var(--universal-padding) / 2); - background: var(--header-back-color); - line-height: calc(3.1875rem - var(--universal-padding) * 1.5); - text-align: center; - color: var(--header-fore-color); - border: 0; - border-radius: 0; - margin: 0; - text-transform: uppercase; } - header button:hover, header button:focus, header [type="button"]:hover, header [type="button"]:focus, header .button:hover, header .button:focus, header [role="button"]:hover, header [role="button"]:focus { - background: var(--header-hover-back-color); } - -nav { - background: var(--nav-back-color); - color: var(--nav-fore-color); - border: 0.0714285714rem solid var(--nav-border-color); - border-radius: var(--universal-border-radius); - margin: var(--universal-margin); } - nav * { - padding: var(--universal-padding) calc(1.5 * var(--universal-padding)); } - nav a, nav a:visited { - display: block; - color: var(--nav-link-color); - border-radius: var(--universal-border-radius); - transition: background 0.3s; } - nav a:hover, nav a:focus, nav a:visited:hover, nav a:visited:focus { - text-decoration: none; - background: var(--nav-hover-back-color); } - nav .sublink-1 { - position: relative; - margin-left: calc(2 * var(--universal-padding)); } - nav .sublink-1:before { - position: absolute; - left: calc(var(--universal-padding) - 1 * var(--universal-padding)); - top: -0.0714285714rem; - content: ''; - height: 100%; - border: 0.0714285714rem solid var(--nav-border-color); - border-left: 0; } - nav .sublink-2 { - position: relative; - margin-left: calc(4 * var(--universal-padding)); } - nav .sublink-2:before { - position: absolute; - left: calc(var(--universal-padding) - 3 * var(--universal-padding)); - top: -0.0714285714rem; - content: ''; - height: 100%; - border: 0.0714285714rem solid var(--nav-border-color); - border-left: 0; } - -footer { - background: var(--footer-back-color); - color: var(--footer-fore-color); - border-top: 0.0714285714rem solid var(--footer-border-color); - padding: calc(2 * var(--universal-padding)) var(--universal-padding); - font-size: 0.875rem; } - footer a, footer a:visited { - color: var(--footer-link-color); } - -header.sticky { - position: -webkit-sticky; - position: sticky; - z-index: 1101; - top: 0; } - -footer.sticky { - position: -webkit-sticky; - position: sticky; - z-index: 1101; - bottom: 0; } - -.drawer-toggle:before { - display: inline-block; - position: relative; - vertical-align: bottom; - content: '\00a0\2261\00a0'; - font-family: sans-serif; - font-size: 1.5em; } -@media screen and (min-width: 500px) { - .drawer-toggle:not(.persistent) { - display: none; } } - -[type="checkbox"].drawer { - height: 1px; - width: 1px; - margin: -1px; - overflow: hidden; - position: absolute; - clip: rect(0 0 0 0); - -webkit-clip-path: inset(100%); - clip-path: inset(100%); } - [type="checkbox"].drawer + * { - display: block; - box-sizing: border-box; - position: fixed; - top: 0; - width: 320px; - height: 100vh; - overflow-y: auto; - background: var(--drawer-back-color); - border: 0.0714285714rem solid var(--drawer-border-color); - border-radius: 0; - margin: 0; - z-index: 1110; - right: -320px; - transition: right 0.3s; } - [type="checkbox"].drawer + * .drawer-close { - position: absolute; - top: var(--universal-margin); - right: var(--universal-margin); - z-index: 1111; - width: 2rem; - height: 2rem; - border-radius: var(--universal-border-radius); - padding: var(--universal-padding); - margin: 0; - cursor: pointer; - transition: background 0.3s; } - [type="checkbox"].drawer + * .drawer-close:before { - display: block; - content: '\00D7'; - color: var(--drawer-close-color); - position: relative; - font-family: sans-serif; - font-size: 2rem; - line-height: 1; - text-align: center; } - [type="checkbox"].drawer + * .drawer-close:hover, [type="checkbox"].drawer + * .drawer-close:focus { - background: var(--drawer-hover-back-color); } - @media screen and (max-width: 320px) { - [type="checkbox"].drawer + * { - width: 100%; } } - [type="checkbox"].drawer:checked + * { - right: 0; } - @media screen and (min-width: 500px) { - [type="checkbox"].drawer:not(.persistent) + * { - position: static; - height: 100%; - z-index: 1100; } - [type="checkbox"].drawer:not(.persistent) + * .drawer-close { - display: none; } } - -/* - Definitions for the responsive table component. -*/ -/* Table module CSS variable definitions. */ -:root { - --table-border-color: #03234b; - --table-border-separator-color: #03234b; - --table-head-back-color: #03234b; - --table-head-fore-color: #ffffff; - --table-body-back-color: #ffffff; - --table-body-fore-color: #03234b; - --table-body-alt-back-color: #f4f4f4; } - -table { - border-collapse: separate; - border-spacing: 0; - margin: 0; - display: flex; - flex: 0 1 auto; - flex-flow: row wrap; - padding: var(--universal-padding); - padding-top: 0; } - table caption { - font-size: 1rem; - margin: calc(2 * var(--universal-margin)) 0; - max-width: 100%; - flex: 0 0 100%; } - table thead, table tbody { - display: flex; - flex-flow: row wrap; - border: 0.0714285714rem solid var(--table-border-color); } - table thead { - z-index: 999; - border-radius: var(--universal-border-radius) var(--universal-border-radius) 0 0; - border-bottom: 0.0714285714rem solid var(--table-border-separator-color); } - table tbody { - border-top: 0; - margin-top: calc(0 - var(--universal-margin)); - border-radius: 0 0 var(--universal-border-radius) var(--universal-border-radius); } - table tr { - display: flex; - padding: 0; } - table th, table td { - padding: calc(0.5 * var(--universal-padding)); - font-size: 0.9rem; } - table th { - text-align: left; - background: var(--table-head-back-color); - color: var(--table-head-fore-color); } - table td { - background: var(--table-body-back-color); - color: var(--table-body-fore-color); - border-top: 0.0714285714rem solid var(--table-border-color); } - -table:not(.horizontal) { - overflow: auto; - max-height: 100%; } - table:not(.horizontal) thead, table:not(.horizontal) tbody { - max-width: 100%; - flex: 0 0 100%; } - table:not(.horizontal) tr { - flex-flow: row wrap; - flex: 0 0 100%; } - table:not(.horizontal) th, table:not(.horizontal) td { - flex: 1 0 0%; - overflow: hidden; - text-overflow: ellipsis; } - table:not(.horizontal) thead { - position: sticky; - top: 0; } - table:not(.horizontal) tbody tr:first-child td { - border-top: 0; } - -table.horizontal { - border: 0; } - table.horizontal thead, table.horizontal tbody { - border: 0; - flex: .2 0 0; - flex-flow: row nowrap; } - table.horizontal tbody { - overflow: auto; - justify-content: space-between; - flex: .8 0 0; - margin-left: 0; - padding-bottom: calc(var(--universal-padding) / 4); } - table.horizontal tr { - flex-direction: column; - flex: 1 0 auto; } - table.horizontal th, table.horizontal td { - width: auto; - border: 0; - border-bottom: 0.0714285714rem solid var(--table-border-color); } - table.horizontal th:not(:first-child), table.horizontal td:not(:first-child) { - border-top: 0; } - table.horizontal th { - text-align: right; - border-left: 0.0714285714rem solid var(--table-border-color); - border-right: 0.0714285714rem solid var(--table-border-separator-color); } - table.horizontal thead tr:first-child { - padding-left: 0; } - table.horizontal th:first-child, table.horizontal td:first-child { - border-top: 0.0714285714rem solid var(--table-border-color); } - table.horizontal tbody tr:last-child td { - border-right: 0.0714285714rem solid var(--table-border-color); } - table.horizontal tbody tr:last-child td:first-child { - border-top-right-radius: 0.25rem; } - table.horizontal tbody tr:last-child td:last-child { - border-bottom-right-radius: 0.25rem; } - table.horizontal thead tr:first-child th:first-child { - border-top-left-radius: 0.25rem; } - table.horizontal thead tr:first-child th:last-child { - border-bottom-left-radius: 0.25rem; } - -@media screen and (max-width: 499px) { - table, table.horizontal { - border-collapse: collapse; - border: 0; - width: 100%; - display: table; } - table thead, table th, table.horizontal thead, table.horizontal th { - border: 0; - height: 1px; - width: 1px; - margin: -1px; - overflow: hidden; - padding: 0; - position: absolute; - clip: rect(0 0 0 0); - -webkit-clip-path: inset(100%); - clip-path: inset(100%); } - table tbody, table.horizontal tbody { - border: 0; - display: table-row-group; } - table tr, table.horizontal tr { - display: block; - border: 0.0714285714rem solid var(--table-border-color); - border-radius: var(--universal-border-radius); - background: #ffffff; - padding: var(--universal-padding); - margin: var(--universal-margin); - margin-bottom: calc(1 * var(--universal-margin)); } - table th, table td, table.horizontal th, table.horizontal td { - width: auto; } - table td, table.horizontal td { - display: block; - border: 0; - text-align: right; } - table td:before, table.horizontal td:before { - content: attr(data-label); - float: left; - font-weight: 600; } - table th:first-child, table td:first-child, table.horizontal th:first-child, table.horizontal td:first-child { - border-top: 0; } - table tbody tr:last-child td, table.horizontal tbody tr:last-child td { - border-right: 0; } } -table tr:nth-of-type(2n) > td { - background: var(--table-body-alt-back-color); } - -@media screen and (max-width: 500px) { - table tr:nth-of-type(2n) { - background: var(--table-body-alt-back-color); } } -:root { - --table-body-hover-back-color: #90caf9; } - -table.hoverable tr:hover, table.hoverable tr:hover > td, table.hoverable tr:focus, table.hoverable tr:focus > td { - background: var(--table-body-hover-back-color); } - -@media screen and (max-width: 500px) { - table.hoverable tr:hover, table.hoverable tr:hover > td, table.hoverable tr:focus, table.hoverable tr:focus > td { - background: var(--table-body-hover-back-color); } } -/* - Definitions for contextual background elements, toasts and tooltips. -*/ -/* Contextual module CSS variable definitions */ -:root { - --mark-back-color: #3cb4e6; - --mark-fore-color: #ffffff; } - -mark { - background: var(--mark-back-color); - color: var(--mark-fore-color); - font-size: 0.95em; - line-height: 1em; - border-radius: var(--universal-border-radius); - padding: calc(var(--universal-padding) / 4) var(--universal-padding); } - mark.inline-block { - display: inline-block; - font-size: 1em; - line-height: 1.4; - padding: calc(var(--universal-padding) / 2) var(--universal-padding); } - -:root { - --toast-back-color: #424242; - --toast-fore-color: #fafafa; } - -.toast { - position: fixed; - bottom: calc(var(--universal-margin) * 3); - left: 50%; - transform: translate(-50%, -50%); - z-index: 1111; - color: var(--toast-fore-color); - background: var(--toast-back-color); - border-radius: calc(var(--universal-border-radius) * 16); - padding: var(--universal-padding) calc(var(--universal-padding) * 3); } - -:root { - --tooltip-back-color: #212121; - --tooltip-fore-color: #fafafa; } - -.tooltip { - position: relative; - display: inline-block; } - .tooltip:before, .tooltip:after { - position: absolute; - opacity: 0; - clip: rect(0 0 0 0); - -webkit-clip-path: inset(100%); - clip-path: inset(100%); - transition: all 0.3s; - z-index: 1010; - left: 50%; } - .tooltip:not(.bottom):before, .tooltip:not(.bottom):after { - bottom: 75%; } - .tooltip.bottom:before, .tooltip.bottom:after { - top: 75%; } - .tooltip:hover:before, .tooltip:hover:after, .tooltip:focus:before, .tooltip:focus:after { - opacity: 1; - clip: auto; - -webkit-clip-path: inset(0%); - clip-path: inset(0%); } - .tooltip:before { - content: ''; - background: transparent; - border: var(--universal-margin) solid transparent; - left: calc(50% - var(--universal-margin)); } - .tooltip:not(.bottom):before { - border-top-color: #212121; } - .tooltip.bottom:before { - border-bottom-color: #212121; } - .tooltip:after { - content: attr(aria-label); - color: var(--tooltip-fore-color); - background: var(--tooltip-back-color); - border-radius: var(--universal-border-radius); - padding: var(--universal-padding); - white-space: nowrap; - transform: translateX(-50%); } - .tooltip:not(.bottom):after { - margin-bottom: calc(2 * var(--universal-margin)); } - .tooltip.bottom:after { - margin-top: calc(2 * var(--universal-margin)); } - -:root { - --modal-overlay-color: rgba(0, 0, 0, 0.45); - --modal-close-color: #e6007e; - --modal-close-hover-color: #ffe97f; } - -[type="checkbox"].modal { - height: 1px; - width: 1px; - margin: -1px; - overflow: hidden; - position: absolute; - clip: rect(0 0 0 0); - -webkit-clip-path: inset(100%); - clip-path: inset(100%); } - [type="checkbox"].modal + div { - position: fixed; - top: 0; - left: 0; - display: none; - width: 100vw; - height: 100vh; - background: var(--modal-overlay-color); } - [type="checkbox"].modal + div .card { - margin: 0 auto; - max-height: 50vh; - overflow: auto; } - [type="checkbox"].modal + div .card .modal-close { - position: absolute; - top: 0; - right: 0; - width: 1.75rem; - height: 1.75rem; - border-radius: var(--universal-border-radius); - padding: var(--universal-padding); - margin: 0; - cursor: pointer; - transition: background 0.3s; } - [type="checkbox"].modal + div .card .modal-close:before { - display: block; - content: '\00D7'; - color: var(--modal-close-color); - position: relative; - font-family: sans-serif; - font-size: 1.75rem; - line-height: 1; - text-align: center; } - [type="checkbox"].modal + div .card .modal-close:hover, [type="checkbox"].modal + div .card .modal-close:focus { - background: var(--modal-close-hover-color); } - [type="checkbox"].modal:checked + div { - display: flex; - flex: 0 1 auto; - z-index: 1200; } - [type="checkbox"].modal:checked + div .card .modal-close { - z-index: 1211; } - -:root { - --collapse-label-back-color: #03234b; - --collapse-label-fore-color: #ffffff; - --collapse-label-hover-back-color: #3cb4e6; - --collapse-selected-label-back-color: #3cb4e6; - --collapse-border-color: var(--collapse-label-back-color); - --collapse-selected-border-color: #ceecf8; - --collapse-content-back-color: #ffffff; - --collapse-selected-label-border-color: #3cb4e6; } - -.collapse { - width: calc(100% - 2 * var(--universal-margin)); - opacity: 1; - display: flex; - flex-direction: column; - margin: var(--universal-margin); - border-radius: var(--universal-border-radius); } - .collapse > [type="radio"], .collapse > [type="checkbox"] { - height: 1px; - width: 1px; - margin: -1px; - overflow: hidden; - position: absolute; - clip: rect(0 0 0 0); - -webkit-clip-path: inset(100%); - clip-path: inset(100%); } - .collapse > label { - flex-grow: 1; - display: inline-block; - height: 1.25rem; - cursor: pointer; - transition: background 0.2s; - color: var(--collapse-label-fore-color); - background: var(--collapse-label-back-color); - border: 0.0714285714rem solid var(--collapse-selected-border-color); - padding: calc(1.25 * var(--universal-padding)); } - .collapse > label:hover, .collapse > label:focus { - background: var(--collapse-label-hover-back-color); } - .collapse > label + div { - flex-basis: auto; - height: 1px; - width: 1px; - margin: -1px; - overflow: hidden; - position: absolute; - clip: rect(0 0 0 0); - -webkit-clip-path: inset(100%); - clip-path: inset(100%); - transition: max-height 0.3s; - max-height: 1px; } - .collapse > :checked + label { - background: var(--collapse-selected-label-back-color); - border-color: var(--collapse-selected-label-border-color); } - .collapse > :checked + label + div { - box-sizing: border-box; - position: relative; - width: 100%; - height: auto; - overflow: auto; - margin: 0; - background: var(--collapse-content-back-color); - border: 0.0714285714rem solid var(--collapse-selected-border-color); - border-top: 0; - padding: var(--universal-padding); - clip: auto; - -webkit-clip-path: inset(0%); - clip-path: inset(0%); - max-height: 100%; } - .collapse > label:not(:first-of-type) { - border-top: 0; } - .collapse > label:first-of-type { - border-radius: var(--universal-border-radius) var(--universal-border-radius) 0 0; } - .collapse > label:last-of-type:not(:first-of-type) { - border-radius: 0 0 var(--universal-border-radius) var(--universal-border-radius); } - .collapse > label:last-of-type:first-of-type { - border-radius: var(--universal-border-radius); } - .collapse > :checked:last-of-type:not(:first-of-type) + label { - border-radius: 0; } - .collapse > :checked:last-of-type + label + div { - border-radius: 0 0 var(--universal-border-radius) var(--universal-border-radius); } - -/* - Custom elements for contextual background elements, toasts and tooltips. -*/ -mark.tertiary { - --mark-back-color: #3cb4e6; } - -mark.tag { - padding: calc(var(--universal-padding)/2) var(--universal-padding); - border-radius: 1em; } - -/* - Definitions for progress elements and spinners. -*/ -/* Progress module CSS variable definitions */ -:root { - --progress-back-color: #3cb4e6; - --progress-fore-color: #555; } - -progress { - display: block; - vertical-align: baseline; - -webkit-appearance: none; - -moz-appearance: none; - appearance: none; - height: 0.75rem; - width: calc(100% - 2 * var(--universal-margin)); - margin: var(--universal-margin); - border: 0; - border-radius: calc(2 * var(--universal-border-radius)); - background: var(--progress-back-color); - color: var(--progress-fore-color); } - progress::-webkit-progress-value { - background: var(--progress-fore-color); - border-top-left-radius: calc(2 * var(--universal-border-radius)); - border-bottom-left-radius: calc(2 * var(--universal-border-radius)); } - progress::-webkit-progress-bar { - background: var(--progress-back-color); } - progress::-moz-progress-bar { - background: var(--progress-fore-color); - border-top-left-radius: calc(2 * var(--universal-border-radius)); - border-bottom-left-radius: calc(2 * var(--universal-border-radius)); } - progress[value="1000"]::-webkit-progress-value { - border-radius: calc(2 * var(--universal-border-radius)); } - progress[value="1000"]::-moz-progress-bar { - border-radius: calc(2 * var(--universal-border-radius)); } - progress.inline { - display: inline-block; - vertical-align: middle; - width: 60%; } - -:root { - --spinner-back-color: #ddd; - --spinner-fore-color: #555; } - -@keyframes spinner-donut-anim { - 0% { - transform: rotate(0deg); } - 100% { - transform: rotate(360deg); } } -.spinner { - display: inline-block; - margin: var(--universal-margin); - border: 0.25rem solid var(--spinner-back-color); - border-left: 0.25rem solid var(--spinner-fore-color); - border-radius: 50%; - width: 1.25rem; - height: 1.25rem; - animation: spinner-donut-anim 1.2s linear infinite; } - -/* - Custom elements for progress bars and spinners. -*/ -progress.primary { - --progress-fore-color: #1976d2; } - -progress.secondary { - --progress-fore-color: #d32f2f; } - -progress.tertiary { - --progress-fore-color: #308732; } - -.spinner.primary { - --spinner-fore-color: #1976d2; } - -.spinner.secondary { - --spinner-fore-color: #d32f2f; } - -.spinner.tertiary { - --spinner-fore-color: #308732; } - -/* - Definitions for icons - powered by Feather (https://feathericons.com/). -*/ -span[class^='icon-'] { - display: inline-block; - height: 1em; - width: 1em; - vertical-align: -0.125em; - background-size: contain; - margin: 0 calc(var(--universal-margin) / 4); } - span[class^='icon-'].secondary { - -webkit-filter: invert(25%); - filter: invert(25%); } - span[class^='icon-'].inverse { - -webkit-filter: invert(100%); - filter: invert(100%); } - -span.icon-alert { - background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='12' cy='12' r='10'%3E%3C/circle%3E%3Cline x1='12' y1='8' x2='12' y2='12'%3E%3C/line%3E%3Cline x1='12' y1='16' x2='12' y2='16'%3E%3C/line%3E%3C/svg%3E"); } -span.icon-bookmark { - background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M19 21l-7-5-7 5V5a2 2 0 0 1 2-2h10a2 2 0 0 1 2 2z'%3E%3C/path%3E%3C/svg%3E"); } -span.icon-calendar { - background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Crect x='3' y='4' width='18' height='18' rx='2' ry='2'%3E%3C/rect%3E%3Cline x1='16' y1='2' x2='16' y2='6'%3E%3C/line%3E%3Cline x1='8' y1='2' x2='8' y2='6'%3E%3C/line%3E%3Cline x1='3' y1='10' x2='21' y2='10'%3E%3C/line%3E%3C/svg%3E"); } -span.icon-credit { - background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Crect x='1' y='4' width='22' height='16' rx='2' ry='2'%3E%3C/rect%3E%3Cline x1='1' y1='10' x2='23' y2='10'%3E%3C/line%3E%3C/svg%3E"); } -span.icon-edit { - background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M20 14.66V20a2 2 0 0 1-2 2H4a2 2 0 0 1-2-2V6a2 2 0 0 1 2-2h5.34'%3E%3C/path%3E%3Cpolygon points='18 2 22 6 12 16 8 16 8 12 18 2'%3E%3C/polygon%3E%3C/svg%3E"); } -span.icon-link { - background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M18 13v6a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2V8a2 2 0 0 1 2-2h6'%3E%3C/path%3E%3Cpolyline points='15 3 21 3 21 9'%3E%3C/polyline%3E%3Cline x1='10' y1='14' x2='21' y2='3'%3E%3C/line%3E%3C/svg%3E"); } -span.icon-help { - background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M9.09 9a3 3 0 0 1 5.83 1c0 2-3 3-3 3'%3E%3C/path%3E%3Ccircle cx='12' cy='12' r='10'%3E%3C/circle%3E%3Cline x1='12' y1='17' x2='12' y2='17'%3E%3C/line%3E%3C/svg%3E"); } -span.icon-home { - background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M3 9l9-7 9 7v11a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2z'%3E%3C/path%3E%3Cpolyline points='9 22 9 12 15 12 15 22'%3E%3C/polyline%3E%3C/svg%3E"); } -span.icon-info { - background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='12' cy='12' r='10'%3E%3C/circle%3E%3Cline x1='12' y1='16' x2='12' y2='12'%3E%3C/line%3E%3Cline x1='12' y1='8' x2='12' y2='8'%3E%3C/line%3E%3C/svg%3E"); } -span.icon-lock { - background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Crect x='3' y='11' width='18' height='11' rx='2' ry='2'%3E%3C/rect%3E%3Cpath d='M7 11V7a5 5 0 0 1 10 0v4'%3E%3C/path%3E%3C/svg%3E"); } -span.icon-mail { - background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M4 4h16c1.1 0 2 .9 2 2v12c0 1.1-.9 2-2 2H4c-1.1 0-2-.9-2-2V6c0-1.1.9-2 2-2z'%3E%3C/path%3E%3Cpolyline points='22,6 12,13 2,6'%3E%3C/polyline%3E%3C/svg%3E"); } -span.icon-location { - background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M21 10c0 7-9 13-9 13s-9-6-9-13a9 9 0 0 1 18 0z'%3E%3C/path%3E%3Ccircle cx='12' cy='10' r='3'%3E%3C/circle%3E%3C/svg%3E"); } -span.icon-phone { - background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M22 16.92v3a2 2 0 0 1-2.18 2 19.79 19.79 0 0 1-8.63-3.07 19.5 19.5 0 0 1-6-6 19.79 19.79 0 0 1-3.07-8.67A2 2 0 0 1 4.11 2h3a2 2 0 0 1 2 1.72 12.84 12.84 0 0 0 .7 2.81 2 2 0 0 1-.45 2.11L8.09 9.91a16 16 0 0 0 6 6l1.27-1.27a2 2 0 0 1 2.11-.45 12.84 12.84 0 0 0 2.81.7A2 2 0 0 1 22 16.92z'%3E%3C/path%3E%3C/svg%3E"); } -span.icon-rss { - background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M4 11a9 9 0 0 1 9 9'%3E%3C/path%3E%3Cpath d='M4 4a16 16 0 0 1 16 16'%3E%3C/path%3E%3Ccircle cx='5' cy='19' r='1'%3E%3C/circle%3E%3C/svg%3E"); } -span.icon-search { - background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='11' cy='11' r='8'%3E%3C/circle%3E%3Cline x1='21' y1='21' x2='16.65' y2='16.65'%3E%3C/line%3E%3C/svg%3E"); } -span.icon-settings { - background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='12' cy='12' r='3'%3E%3C/circle%3E%3Cpath d='M19.4 15a1.65 1.65 0 0 0 .33 1.82l.06.06a2 2 0 0 1 0 2.83 2 2 0 0 1-2.83 0l-.06-.06a1.65 1.65 0 0 0-1.82-.33 1.65 1.65 0 0 0-1 1.51V21a2 2 0 0 1-2 2 2 2 0 0 1-2-2v-.09A1.65 1.65 0 0 0 9 19.4a1.65 1.65 0 0 0-1.82.33l-.06.06a2 2 0 0 1-2.83 0 2 2 0 0 1 0-2.83l.06-.06a1.65 1.65 0 0 0 .33-1.82 1.65 1.65 0 0 0-1.51-1H3a2 2 0 0 1-2-2 2 2 0 0 1 2-2h.09A1.65 1.65 0 0 0 4.6 9a1.65 1.65 0 0 0-.33-1.82l-.06-.06a2 2 0 0 1 0-2.83 2 2 0 0 1 2.83 0l.06.06a1.65 1.65 0 0 0 1.82.33H9a1.65 1.65 0 0 0 1-1.51V3a2 2 0 0 1 2-2 2 2 0 0 1 2 2v.09a1.65 1.65 0 0 0 1 1.51 1.65 1.65 0 0 0 1.82-.33l.06-.06a2 2 0 0 1 2.83 0 2 2 0 0 1 0 2.83l-.06.06a1.65 1.65 0 0 0-.33 1.82V9a1.65 1.65 0 0 0 1.51 1H21a2 2 0 0 1 2 2 2 2 0 0 1-2 2h-.09a1.65 1.65 0 0 0-1.51 1z'%3E%3C/path%3E%3C/svg%3E"); } -span.icon-share { - background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='18' cy='5' r='3'%3E%3C/circle%3E%3Ccircle cx='6' cy='12' r='3'%3E%3C/circle%3E%3Ccircle cx='18' cy='19' r='3'%3E%3C/circle%3E%3Cline x1='8.59' y1='13.51' x2='15.42' y2='17.49'%3E%3C/line%3E%3Cline x1='15.41' y1='6.51' x2='8.59' y2='10.49'%3E%3C/line%3E%3C/svg%3E"); } -span.icon-cart { - background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='9' cy='21' r='1'%3E%3C/circle%3E%3Ccircle cx='20' cy='21' r='1'%3E%3C/circle%3E%3Cpath d='M1 1h4l2.68 13.39a2 2 0 0 0 2 1.61h9.72a2 2 0 0 0 2-1.61L23 6H6'%3E%3C/path%3E%3C/svg%3E"); } -span.icon-upload { - background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M21 15v4a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2v-4'%3E%3C/path%3E%3Cpolyline points='17 8 12 3 7 8'%3E%3C/polyline%3E%3Cline x1='12' y1='3' x2='12' y2='15'%3E%3C/line%3E%3C/svg%3E"); } -span.icon-user { - background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M20 21v-2a4 4 0 0 0-4-4H8a4 4 0 0 0-4 4v2'%3E%3C/path%3E%3Ccircle cx='12' cy='7' r='4'%3E%3C/circle%3E%3C/svg%3E"); } - -/* - Definitions for utilities and helper classes. -*/ -/* Utility module CSS variable definitions */ -:root { - --generic-border-color: rgba(0, 0, 0, 0.3); - --generic-box-shadow: 0 0.2857142857rem 0.2857142857rem 0 rgba(0, 0, 0, 0.125), 0 0.1428571429rem 0.1428571429rem -0.1428571429rem rgba(0, 0, 0, 0.125); } - -.hidden { - display: none !important; } - -.visually-hidden { - position: absolute !important; - width: 1px !important; - height: 1px !important; - margin: -1px !important; - border: 0 !important; - padding: 0 !important; - clip: rect(0 0 0 0) !important; - -webkit-clip-path: inset(100%) !important; - clip-path: inset(100%) !important; - overflow: hidden !important; } - -.bordered { - border: 0.0714285714rem solid var(--generic-border-color) !important; } - -.rounded { - border-radius: var(--universal-border-radius) !important; } - -.circular { - border-radius: 50% !important; } - -.shadowed { - box-shadow: var(--generic-box-shadow) !important; } - -.responsive-margin { - margin: calc(var(--universal-margin) / 4) !important; } - @media screen and (min-width: 500px) { - .responsive-margin { - margin: calc(var(--universal-margin) / 2) !important; } } - @media screen and (min-width: 1280px) { - .responsive-margin { - margin: var(--universal-margin) !important; } } - -.responsive-padding { - padding: calc(var(--universal-padding) / 4) !important; } - @media screen and (min-width: 500px) { - .responsive-padding { - padding: calc(var(--universal-padding) / 2) !important; } } - @media screen and (min-width: 1280px) { - .responsive-padding { - padding: var(--universal-padding) !important; } } - -@media screen and (max-width: 499px) { - .hidden-sm { - display: none !important; } } -@media screen and (min-width: 500px) and (max-width: 1279px) { - .hidden-md { - display: none !important; } } -@media screen and (min-width: 1280px) { - .hidden-lg { - display: none !important; } } -@media screen and (max-width: 499px) { - .visually-hidden-sm { - position: absolute !important; - width: 1px !important; - height: 1px !important; - margin: -1px !important; - border: 0 !important; - padding: 0 !important; - clip: rect(0 0 0 0) !important; - -webkit-clip-path: inset(100%) !important; - clip-path: inset(100%) !important; - overflow: hidden !important; } } -@media screen and (min-width: 500px) and (max-width: 1279px) { - .visually-hidden-md { - position: absolute !important; - width: 1px !important; - height: 1px !important; - margin: -1px !important; - border: 0 !important; - padding: 0 !important; - clip: rect(0 0 0 0) !important; - -webkit-clip-path: inset(100%) !important; - clip-path: inset(100%) !important; - overflow: hidden !important; } } -@media screen and (min-width: 1280px) { - .visually-hidden-lg { - position: absolute !important; - width: 1px !important; - height: 1px !important; - margin: -1px !important; - border: 0 !important; - padding: 0 !important; - clip: rect(0 0 0 0) !important; - -webkit-clip-path: inset(100%) !important; - clip-path: inset(100%) !important; - overflow: hidden !important; } } - -/*# sourceMappingURL=mini-custom.css.map */ - -img[alt="ST logo"] { display: block; margin: auto; width: 75%; max-width: 250px; min-width: 71px; } -img[alt="Cube logo"] { float: right; width: 30%; max-width: 10rem; min-width: 8rem; padding-right: 1rem;} - -.figure { - display: block; - margin-left: auto; - margin-right: auto; - text-align: center; -} diff --git a/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/_htmresc/st_logo_2020.png b/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/_htmresc/st_logo_2020.png deleted file mode 100644 index d6cebb5ac..000000000 Binary files a/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/_htmresc/st_logo_2020.png and /dev/null differ diff --git a/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/tcpp0203.c b/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/tcpp0203.c deleted file mode 100644 index 952ff16c9..000000000 --- a/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/tcpp0203.c +++ /dev/null @@ -1,886 +0,0 @@ -/** - ****************************************************************************** - * @file tcpp0203.c - * @author MCD Application Team - * @brief This file provides the TCPP02/03 Type-C port protection driver. - ****************************************************************************** - * @attention - * - * Copyright (c) 2021 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "tcpp0203.h" - -#if defined(_TRACE) -#include "usbpd_core.h" -#include "usbpd_trace.h" -#include "string.h" -#include "stdio.h" -#endif /* _TRACE */ - -/** @addtogroup BSP - * @{ - */ - -/** @addtogroup Components - * @{ - */ - -/** @addtogroup TCPP0203 - * @brief This file provides a set of functions needed to drive the - * TCPP02/03 Type-C port protection. - * @{ - */ - -/** @defgroup TCPP0203_Private_Constants Private Constants - * @{ - */ - -/* Compilation option in order to enable/disable a concistency check performed - after each I2C access into TCPP0203 registers : goal is to check that written value in Reg0 - is properly reflected into reg1 register content. - To enable register consistency check, please uncomment below definition. - To disable it, comment below line */ -/* #define TCPP0203_REGISTER_CONSISTENCY_CHECK */ - -/** @defgroup TCPP0203_Private_Types Private Types - * @{ - */ -/* TCPP02/03 Type-C port protection driver structure initialization */ -TCPP0203_Drv_t TCPP0203_Driver = -{ - TCPP0203_Init, - TCPP0203_DeInit, - TCPP0203_Reset, - TCPP0203_SetVConnSwitch, - TCPP0203_SetGateDriverProvider, - TCPP0203_SetGateDriverConsumer, - TCPP0203_SetPowerMode, - TCPP0203_SetVBusDischarge, - TCPP0203_SetVConnDischarge, - TCPP0203_GetVConnSwitchAck, - TCPP0203_GetGateDriverProviderAck, - TCPP0203_GetGateDriverConsumerAck, - TCPP0203_GetPowerModeAck, - TCPP0203_GetVBusDischargeAck, - TCPP0203_GetVConnDischargeAck, - TCPP0203_GetOCPVConnFlag, - TCPP0203_GetOCPVBusFlag, - TCPP0203_GetOVPVBusFlag, - TCPP0203_GetOVPCCFlag, - TCPP0203_GetOTPFlag, - TCPP0203_GetVBusOkFlag, - TCPP0203_ReadTCPPType, - TCPP0203_ReadVCONNPower, - TCPP0203_WriteCtrlRegister, - TCPP0203_ReadAckRegister, - TCPP0203_ReadFlagRegister, -}; - -/** - * @} - */ - -/** @defgroup TCPP0203_Private_Variables Private Variables - * @{ - */ -static uint8_t TCPP0203_DeviceType = TCPP0203_DEVICE_TYPE_03; - -#if defined(TCPP0203_REGISTER_CONSISTENCY_CHECK) -static uint8_t Reg0_Expected_Value = 0x00; -static uint8_t Reg1_LastRead_Value = 0x00; -#endif /* TCPP0203_REGISTER_CONSISTENCY_CHECK */ - -/** - * @} - */ - -/* Private function prototypes -----------------------------------------------*/ - -/** @defgroup TCPP0203_Private_Function_Prototypes TCPP0203 Private Function Prototypes - * @{ - */ -static int32_t TCPP0203_ReadRegWrap(const void *handle, uint8_t Reg, uint8_t *Data, uint8_t Length); -static int32_t TCPP0203_WriteRegWrap(const void *handle, uint8_t Reg, uint8_t *Data, uint8_t Length); - -static int32_t TCPP0203_ModifyReg0(TCPP0203_Object_t *pObj, uint8_t Value, uint8_t Mask); - -#if defined(TCPP0203_REGISTER_CONSISTENCY_CHECK) -static int32_t TCPP0203_CheckReg0Reg1(TCPP0203_Object_t *pObj, uint8_t Reg0ExpectedValue); -#endif /* TCPP0203_REGISTER_CONSISTENCY_CHECK */ - -/** - * @} - */ - -/** @defgroup TCPP0203_Exported_Functions TCPP0203 Exported Functions - * @{ - */ - -/** - * @brief Register Bus Io to component - * @param Component object pointer - * @retval Status of execution - */ -int32_t TCPP0203_RegisterBusIO(TCPP0203_Object_t *pObj, TCPP0203_IO_t *pIO) -{ - int32_t ret; - - if (pObj == NULL) - { - ret = TCPP0203_ERROR; - } - else - { - pObj->IO.Init = pIO->Init; - pObj->IO.DeInit = pIO->DeInit; - pObj->IO.Address = pIO->Address; - pObj->IO.WriteReg = pIO->WriteReg; - pObj->IO.ReadReg = pIO->ReadReg; - pObj->IO.GetTick = pIO->GetTick; - - pObj->Ctx.ReadReg = TCPP0203_ReadRegWrap; - pObj->Ctx.WriteReg = TCPP0203_WriteRegWrap; - pObj->Ctx.handle = pObj; - - if (pObj->IO.Init != NULL) - { - ret = pObj->IO.Init(); - } - else - { - ret = TCPP0203_ERROR; - } - } - - return ret; -} - -/** - * @brief Initializes the TCPP0203 interface - * @param pObj Pointer to component object - * @retval Component status (TCPP0203_OK / TCPP0203_ERROR) - */ -int32_t TCPP0203_Init(TCPP0203_Object_t *pObj) -{ - int32_t ret = 0; - uint8_t tmp; - - if (pObj->IsInitialized == 0U) - { - /* Read TCPP Device type */ - ret += tcpp0203_read_reg(&pObj->Ctx, TCPP0203_READ_REG2, &tmp, 1); - - if (ret == TCPP0203_OK) - { - TCPP0203_DeviceType = (tmp & TCPP0203_DEVICE_TYPE_MSK); - } - else - { - TCPP0203_DeviceType = TCPP0203_DEVICE_TYPE_02; - } - pObj->IsInitialized = 1U; - } - - if (ret != TCPP0203_OK) - { - ret = TCPP0203_ERROR; - } - - return ret; -} - -/** - * @brief Deinitializes the TCPP0203 interface - * @param pObj Pointer to component object - * @retval Component status (TCPP0203_OK / TCPP0203_ERROR) - */ -int32_t TCPP0203_DeInit(TCPP0203_Object_t *pObj) -{ - if (pObj->IsInitialized == 1U) - { - /* De-Initialize IO BUS layer */ - pObj->IO.DeInit(); - - pObj->IsInitialized = 0U; - } - - return TCPP0203_OK; -} - -/** - * @brief Resets TCPP0203 register (Reg0) - * @param pObj Pointer to component object - * @retval Component status (TCPP0203_OK / TCPP0203_ERROR) - */ -int32_t TCPP0203_Reset(TCPP0203_Object_t *pObj) -{ - int32_t ret = TCPP0203_OK; - uint8_t tmp = TCPP0203_REG0_RST_VALUE; - - /* Write reset values in Reg0 register */ - if (tcpp0203_write_reg(&pObj->Ctx, TCPP0203_PROG_CTRL, &tmp, 1) != TCPP0203_OK) - { - ret = TCPP0203_ERROR; - } - -#if defined(TCPP0203_REGISTER_CONSISTENCY_CHECK) - Reg0_Expected_Value = TCPP0203_REG0_RST_VALUE; - Reg1_LastRead_Value = TCPP0203_REG0_RST_VALUE; -#endif /* TCPP0203_REGISTER_CONSISTENCY_CHECK */ - - return ret; -} - -/** - * @brief Configure TCPP0203 VConn Switch - * @param pObj Pointer to component object - * @param VConnSwitch VConn Switch requested setting - * This parameter can be one of the following values: - * @arg TCPP0203_VCONN_SWITCH_OPEN VConn switch open - * @arg TCPP0203_VCONN_SWITCH_CC1 VConn closed on CC1 - * @arg TCPP0203_VCONN_SWITCH_CC2 VConn closed on CC2 - * @retval Component status - */ -int32_t TCPP0203_SetVConnSwitch(TCPP0203_Object_t *pObj, uint8_t VConnSwitch) -{ - int32_t ret = TCPP0203_OK; - - if ((VConnSwitch != TCPP0203_VCONN_SWITCH_OPEN) - && (VConnSwitch != TCPP0203_VCONN_SWITCH_CC1) - && (VConnSwitch != TCPP0203_VCONN_SWITCH_CC2)) - { - ret = TCPP0203_ERROR; - } - else - { - /* Update VConn switch setting in Writing register Reg0 */ - ret += TCPP0203_ModifyReg0(pObj, VConnSwitch, TCPP0203_VCONN_SWITCH_MSK); - } - - return ret; -} - -/** - * @brief Configure TCPP0203 Gate Driver for Provider path - * @param pObj Pointer to component object - * @param GateDriverProvider GDP switch load requested setting - * This parameter can be one of the following values: - * @arg TCPP0203_GD_PROVIDER_SWITCH_OPEN GDP Switch Load Open - * @arg TCPP0203_GD_PROVIDER_SWITCH_CLOSED GDP Switch Load closed - * @retval Component status - */ -int32_t TCPP0203_SetGateDriverProvider(TCPP0203_Object_t *pObj, uint8_t GateDriverProvider) -{ - int32_t ret = TCPP0203_OK; - - if ((GateDriverProvider != TCPP0203_GD_PROVIDER_SWITCH_OPEN) - && (GateDriverProvider != TCPP0203_GD_PROVIDER_SWITCH_CLOSED)) - { - ret = TCPP0203_ERROR; - } - else - { - /* Update GDP Switch Load setting in Writing register Reg0 */ - if (GateDriverProvider == TCPP0203_GD_PROVIDER_SWITCH_CLOSED) - { - /* If Gate Driver Provider is to be closed, Gate Driver Consumer should be open */ - ret += TCPP0203_ModifyReg0(pObj, (GateDriverProvider | TCPP0203_GD_CONSUMER_SWITCH_OPEN), - (TCPP0203_GD_PROVIDER_SWITCH_MSK | TCPP0203_GD_CONSUMER_SWITCH_MSK)); - } - else - { - ret += TCPP0203_ModifyReg0(pObj, GateDriverProvider, TCPP0203_GD_PROVIDER_SWITCH_MSK); - } - } - - return ret; -} - -/** - * @brief Configure TCPP0203 Gate Driver for Consumer path - * @param pObj Pointer to component object - * @param GateDriverConsumer GDC switch load requested setting - * This parameter can be one of the following values: - * @arg TCPP0203_GD_CONSUMER_SWITCH_OPEN GDC Switch Load Open - * @arg TCPP0203_GD_CONSUMER_SWITCH_CLOSED GDC Switch Load closed - * @retval Component status - */ -int32_t TCPP0203_SetGateDriverConsumer(TCPP0203_Object_t *pObj, uint8_t GateDriverConsumer) -{ - int32_t ret = TCPP0203_OK; - - /* Check if TCPP type is TCPP03. Otherwise, return error */ - if (TCPP0203_DeviceType != TCPP0203_DEVICE_TYPE_03) - { - return (TCPP0203_ERROR); - } - - if ((GateDriverConsumer != TCPP0203_GD_CONSUMER_SWITCH_OPEN) - && (GateDriverConsumer != TCPP0203_GD_CONSUMER_SWITCH_CLOSED)) - { - ret = TCPP0203_ERROR; - } - else - { - /* Update GDC Switch Load setting in Writing register Reg0 */ - if (GateDriverConsumer == TCPP0203_GD_CONSUMER_SWITCH_CLOSED) - { - /* If Gate Driver Consumer is to be closed, Gate Driver Provider should be open */ - ret += TCPP0203_ModifyReg0(pObj, (GateDriverConsumer | TCPP0203_GD_PROVIDER_SWITCH_OPEN), - (TCPP0203_GD_PROVIDER_SWITCH_MSK | TCPP0203_GD_CONSUMER_SWITCH_MSK)); - } - else - { - ret += TCPP0203_ModifyReg0(pObj, GateDriverConsumer, TCPP0203_GD_CONSUMER_SWITCH_MSK); - } - } - - return ret; -} - -/** - * @brief Configure TCPP0203 Power Mode - * @param pObj Pointer to component object - * @param PowerMode Power mode requested setting - * This parameter can be one of the following values: - * @arg TCPP0203_POWER_MODE_HIBERNATE Hibernate - * @arg TCPP0203_POWER_MODE_LOWPOWER Low Power - * @arg TCPP0203_POWER_MODE_NORMAL Normal - * @retval Component status - */ -int32_t TCPP0203_SetPowerMode(TCPP0203_Object_t *pObj, uint8_t PowerMode) -{ - int32_t ret = TCPP0203_OK; - - if ((PowerMode != TCPP0203_POWER_MODE_HIBERNATE) - && (PowerMode != TCPP0203_POWER_MODE_LOWPOWER) - && (PowerMode != TCPP0203_POWER_MODE_NORMAL)) - { - ret = TCPP0203_ERROR; - } - else - { - /* Update Power Mode setting in Writing register Reg0 */ - ret += TCPP0203_ModifyReg0(pObj, PowerMode, TCPP0203_POWER_MODE_MSK); - } - - return ret; -} - -/** - * @brief Configure TCPP0203 Gate Driver for Provider path - * @param pObj Pointer to component object - * @param VBusDischarge VBUS Discharge requested setting - * This parameter can be one of the following values: - * @arg TCPP0203_VBUS_DISCHARGE_OFF VBUS Discharge Off - * @arg TCPP0203_VBUS_DISCHARGE_ON VBUS Discharge On - * @retval Component status - */ -int32_t TCPP0203_SetVBusDischarge(TCPP0203_Object_t *pObj, uint8_t VBusDischarge) -{ - int32_t ret = TCPP0203_OK; - - if ((VBusDischarge != TCPP0203_VBUS_DISCHARGE_OFF) - && (VBusDischarge != TCPP0203_VBUS_DISCHARGE_ON)) - { - ret = TCPP0203_ERROR; - } - else - { - /* Update VBUS Discharge setting in Writing register Reg0 */ - ret += TCPP0203_ModifyReg0(pObj, VBusDischarge, TCPP0203_VBUS_DISCHARGE_MSK); - } - - return ret; -} - -/** - * @brief Configure TCPP0203 Gate Driver for Provider path - * @param pObj Pointer to component object - * @param VConnDischarge GDP switch load requested setting - * This parameter can be one of the following values: - * @arg TCPP0203_VCONN_DISCHARGE_OFF VConn Discharge Off - * @arg TCPP0203_VCONN_DISCHARGE_ON VConn Discharge On - * @retval Component status - */ -int32_t TCPP0203_SetVConnDischarge(TCPP0203_Object_t *pObj, uint8_t VConnDischarge) -{ - int32_t ret = TCPP0203_OK; - - if ((VConnDischarge != TCPP0203_VCONN_DISCHARGE_OFF) - && (VConnDischarge != TCPP0203_VCONN_DISCHARGE_ON)) - { - ret = TCPP0203_ERROR; - } - else - { - /* Update VConn Discharge setting in Writing register Reg0 */ - ret += TCPP0203_ModifyReg0(pObj, VConnDischarge, TCPP0203_VCONN_DISCHARGE_MSK); - } - - return ret; -} - -/** - * @brief Get VConn switch Ack value - * @param pObj Pointer to component object - * @param pVConnSwitchAck Pointer on VConn switch Ack value - * This output parameter can be one of the following values: - * @arg TCPP0203_VCONN_SWITCH_OPEN VConn switch open Ack - * @arg TCPP0203_VCONN_SWITCH_CC1 VConn closed on CC1 Ack - * @arg TCPP0203_VCONN_SWITCH_CC2 VConn closed on CC2 Ack - * @retval Component status - */ -int32_t TCPP0203_GetVConnSwitchAck(TCPP0203_Object_t *pObj, uint8_t *pVConnSwitchAck) -{ - int32_t ret; - uint8_t tmp; - - ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_ACK_REG, &tmp, 1); - *pVConnSwitchAck = (tmp & TCPP0203_VCONN_SWITCH_ACK_MSK); - - return ret; -} - -/** - * @brief Get Gate Driver Provider Ack value - * @param pObj Pointer to component object - * @param pGateDriverProviderAck Pointer on Gate Driver Provider Ack value - * This output parameter can be one of the following values: - * @arg TCPP0203_GD_PROVIDER_SWITCH_ACK_OPEN Gate Driver Provider Open Ack - * @arg TCPP0203_GD_PROVIDER_SWITCH_ACK_CLOSED Gate Driver Provider Closed Ack - * @retval Component status - */ -int32_t TCPP0203_GetGateDriverProviderAck(TCPP0203_Object_t *pObj, uint8_t *pGateDriverProviderAck) -{ - int32_t ret; - uint8_t tmp; - - ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_ACK_REG, &tmp, 1); - *pGateDriverProviderAck = (tmp & TCPP0203_GD_PROVIDER_SWITCH_ACK_MSK); - - return ret; -} - -/** - * @brief Get Gate Driver Consumer Ack value - * @param pObj Pointer to component object - * @param pGateDriverConsumerAck Pointer on Gate Driver Consumer Ack value - * This output parameter can be one of the following values: - * @arg TCPP0203_GD_CONSUMER_SWITCH_ACK_OPEN Gate Driver Consumer Open Ack - * @arg TCPP0203_GD_CONSUMER_SWITCH_ACK_CLOSED Gate Driver Consumer Closed Ack - * @retval Component status - */ -int32_t TCPP0203_GetGateDriverConsumerAck(TCPP0203_Object_t *pObj, uint8_t *pGateDriverConsumerAck) -{ - int32_t ret; - uint8_t tmp; - - /* Check if TCPP type is TCPP03. Otherwise, return error */ - if (TCPP0203_DeviceType != TCPP0203_DEVICE_TYPE_03) - { - return (TCPP0203_ERROR); - } - - ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_ACK_REG, &tmp, 1); - *pGateDriverConsumerAck = (tmp & TCPP0203_GD_CONSUMER_SWITCH_ACK_MSK); - - return ret; -} - -/** - * @brief Get Power Mode Ack value - * @param pObj Pointer to component object - * @param pPowerModeAck Pointer on Power Mode Ack value - * This output parameter can be one of the following values: - * @arg TCPP0203_POWER_MODE_ACK_HIBERNATE Power Mode Hibernate Ack - * @arg TCPP0203_POWER_MODE_ACK_LOWPOWER Power Mode Low Power Ack - * @arg TCPP0203_POWER_MODE_ACK_NORMAL Power Mode Normal Ack - * @retval Component status - */ -int32_t TCPP0203_GetPowerModeAck(TCPP0203_Object_t *pObj, uint8_t *pPowerModeAck) -{ - int32_t ret; - uint8_t tmp; - - ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_ACK_REG, &tmp, 1); - *pPowerModeAck = (tmp & TCPP0203_POWER_MODE_ACK_MSK); - - return ret; -} - -/** - * @brief Get VBUS Discharge Ack value - * @param pObj Pointer to component object - * @param pVBusDischargeAck Pointer on VBUS Discharge Ack value - * This output parameter can be one of the following values: - * @arg TCPP0203_VBUS_DISCHARGE_ACK_OFF VBUS Discharge Off Ack - * @arg TCPP0203_VBUS_DISCHARGE_ACK_ON VBUS Discharge On Ack - * @retval Component status - */ -int32_t TCPP0203_GetVBusDischargeAck(TCPP0203_Object_t *pObj, uint8_t *pVBusDischargeAck) -{ - int32_t ret; - uint8_t tmp; - - ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_ACK_REG, &tmp, 1); - *pVBusDischargeAck = (tmp & TCPP0203_VBUS_DISCHARGE_ACK_MSK); - - return ret; -} - -/** - * @brief Get VConn Discharge Ack value - * @param pObj Pointer to component object - * @param pVConnDischargeAck Pointer on VConn Discharge Ack value - * This output parameter can be one of the following values: - * @arg TCPP0203_VCONN_DISCHARGE_ACK_OFF VConn Discharge Off Ack - * @arg TCPP0203_VCONN_DISCHARGE_ACK_ON VConn Discharge On Ack - * @retval Component status - */ -int32_t TCPP0203_GetVConnDischargeAck(TCPP0203_Object_t *pObj, uint8_t *pVConnDischargeAck) -{ - int32_t ret; - uint8_t tmp; - - ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_ACK_REG, &tmp, 1); - *pVConnDischargeAck = (tmp & TCPP0203_VCONN_DISCHARGE_ACK_MSK); - - return ret; -} - -/** - * @brief Get OCP VConn Flag value - * @param pObj Pointer to component object - * @param pOCPVConnFlag Pointer on OCP VConn Flag value - * This output parameter can be one of the following values: - * @arg TCPP0203_FLAG_OCP_VCONN_RESET OCP VConn flag not set - * @arg TCPP0203_FLAG_OCP_VCONN_SET OCP VConn flag set - * @retval Component status - */ -int32_t TCPP0203_GetOCPVConnFlag(TCPP0203_Object_t *pObj, uint8_t *pOCPVConnFlag) -{ - int32_t ret; - uint8_t tmp; - - ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_FLAG_REG, &tmp, 1); - *pOCPVConnFlag = (tmp & TCPP0203_FLAG_OCP_VCONN_MSK); - - return ret; -} - -/** - * @brief Get OCP VBUS Flag value - * @param pObj Pointer to component object - * @param pGetOCPVBusFlag Pointer on OCP VBUS Flag value - * This output parameter can be one of the following values: - * @arg TCPP0203_FLAG_OCP_VBUS_RESET OCP VBUS flag not set - * @arg TCPP0203_FLAG_OCP_VBUS_SET OCP VBUS flag set - * @retval Component status - */ -int32_t TCPP0203_GetOCPVBusFlag(TCPP0203_Object_t *pObj, uint8_t *pGetOCPVBusFlag) -{ - int32_t ret; - uint8_t tmp; - - ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_FLAG_REG, &tmp, 1); - *pGetOCPVBusFlag = (tmp & TCPP0203_FLAG_OCP_VBUS_MSK); - - return ret; -} - -/** - * @brief Get OVP VBUS Flag value - * @param pObj Pointer to component object - * @param pOVPVBusFlag Pointer on OVP VBUS Flag value - * This output parameter can be one of the following values: - * @arg TCPP0203_FLAG_OVP_VBUS_RESET OVP VBUS flag not set - * @arg TCPP0203_FLAG_OVP_VBUS_SET OVP VBUS flag set - * @retval Component status - */ -int32_t TCPP0203_GetOVPVBusFlag(TCPP0203_Object_t *pObj, uint8_t *pOVPVBusFlag) -{ - int32_t ret; - uint8_t tmp; - - ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_FLAG_REG, &tmp, 1); - *pOVPVBusFlag = (tmp & TCPP0203_FLAG_OVP_VBUS_MSK); - - return ret; -} - -/** - * @brief Get OVP CC Flag value - * @param pObj Pointer to component object - * @param pOVPCCFlag Pointer on OVP CC Flag value - * This output parameter can be one of the following values: - * @arg TCPP0203_FLAG_OVP_CC_RESET OVP CC flag not set - * @arg TCPP0203_FLAG_OVP_CC_SET OVP CC flag set - * @retval Component status - */ -int32_t TCPP0203_GetOVPCCFlag(TCPP0203_Object_t *pObj, uint8_t *pOVPCCFlag) -{ - int32_t ret; - uint8_t tmp; - - ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_FLAG_REG, &tmp, 1); - *pOVPCCFlag = (tmp & TCPP0203_FLAG_OVP_CC_MSK); - - return ret; -} - -/** - * @brief Get Over Temperature Flag value - * @param pObj Pointer to component object - * @param pOTPFlag Pointer on Over Temperature Flag value - * This output parameter can be one of the following values: - * @arg TCPP0203_FLAG_OTP_RESET Over Temperature flag not set - * @arg TCPP0203_FLAG_OTP_SET Over Temperature flag set - * @retval Component status - */ -int32_t TCPP0203_GetOTPFlag(TCPP0203_Object_t *pObj, uint8_t *pOTPFlag) -{ - int32_t ret; - uint8_t tmp; - - ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_FLAG_REG, &tmp, 1); - *pOTPFlag = (tmp & TCPP0203_FLAG_OTP_MSK); - - return ret; -} - -/** - * @brief Get VBUS OK Flag value - * @param pObj Pointer to component object - * @param pVBusOkFlag Pointer on VBUS OK Flag value - * This output parameter can be one of the following values: - * @arg TCPP0203_FLAG_VBUS_OK_RESET VBUS OK flag not set - * @arg TCPP0203_FLAG_VBUS_OK_SET VBUS OK flag set - * @retval Component status - */ -int32_t TCPP0203_GetVBusOkFlag(TCPP0203_Object_t *pObj, uint8_t *pVBusOkFlag) -{ - int32_t ret; - uint8_t tmp; - - ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_FLAG_REG, &tmp, 1); - *pVBusOkFlag = (tmp & TCPP0203_FLAG_VBUS_OK_MSK); - - return ret; -} - -/** - * @brief Get TCPP0203 Device Type value - * @param pObj Pointer to component object - * @param pTCPPType Pointer on TCPP0203 Device Type value - * This output parameter can be one of the following values: - * @arg TCPP0203_DEVICE_TYPE_02 TCPP02 Type - * @arg TCPP0203_DEVICE_TYPE_03 TCPP03 Type - * @retval Component status - */ -int32_t TCPP0203_ReadTCPPType(TCPP0203_Object_t *pObj, uint8_t *pTCPPType) -{ - int32_t ret; - uint8_t tmp; - - ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_FLAG_REG, &tmp, 1); - *pTCPPType = (tmp & TCPP0203_DEVICE_TYPE_MSK); - - return ret; -} - -/** - * @brief Get VConn Power value - * @param pObj Pointer to component object - * @param pVCONNPower Pointer on VConn Power value - * This output parameter can be one of the following values: - * @arg TCPP0203_FLAG_VCONN_PWR_1W OCP VConn flag not set - * @arg TCPP0203_FLAG_VCONN_PWR_0_1W OCP VConn flag set - * @retval Component status - */ -int32_t TCPP0203_ReadVCONNPower(TCPP0203_Object_t *pObj, uint8_t *pVCONNPower) -{ - int32_t ret; - uint8_t tmp; - - ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_FLAG_REG, &tmp, 1); - *pVCONNPower = (tmp & TCPP0203_FLAG_VCONN_PWR_MSK); - - return ret; -} - -/** - * @brief Set complete Ctrl register value (Reg 0) - * @param pObj Pointer to component object - * @param pCtrlRegister Pointer on Ctrl register value - * @retval Component status - */ -int32_t TCPP0203_WriteCtrlRegister(TCPP0203_Object_t *pObj, uint8_t *pCtrlRegister) -{ - int32_t ret; - - /* Update value in writing register (reg0) */ - ret = tcpp0203_write_reg(&pObj->Ctx, TCPP0203_PROG_CTRL, pCtrlRegister, 1); - -#if defined(TCPP0203_REGISTER_CONSISTENCY_CHECK) - Reg0_Expected_Value = *pCtrlRegister; -#endif /* TCPP0203_REGISTER_CONSISTENCY_CHECK */ - - return ret; -} - -/** - * @brief Get complete Ack register value - * @param pObj Pointer to component object - * @param pAckRegister Pointer on Ack register value - * @retval Component status - */ -int32_t TCPP0203_ReadAckRegister(TCPP0203_Object_t *pObj, uint8_t *pAckRegister) -{ - int32_t ret; - - ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_ACK_REG, pAckRegister, 1); - - return ret; -} - -/** - * @brief Get complete Flag register value - * @param pObj Pointer to component object - * @param pFlagRegister Pointer on Flag register value - * @retval Component status - */ -int32_t TCPP0203_ReadFlagRegister(TCPP0203_Object_t *pObj, uint8_t *pFlagRegister) -{ - int32_t ret; - - ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_FLAG_REG, pFlagRegister, 1); - - return ret; -} - -/******************** Static functions ****************************************/ -/** - * @brief Wrap TCPP0203 read function to Bus IO function - * @param handle Component object handle - * @param Reg Target register address to read - * @param pData Buffer where Target register value should be stored - * @param Length buffer size to be read - * @retval error status - */ -static int32_t TCPP0203_ReadRegWrap(const void *handle, uint8_t Reg, uint8_t *pData, uint8_t Length) -{ - const TCPP0203_Object_t *pObj = (const TCPP0203_Object_t *)handle; - - return pObj->IO.ReadReg(pObj->IO.Address, Reg, pData, Length); -} - -/** - * @brief Wrap TCPP0203 write function to Bus IO function - * @param handle Component object handle - * @param Reg Target register address to write - * @param pData Target register value to be written - * @param Length Buffer size to be written - * @retval error status - */ -static int32_t TCPP0203_WriteRegWrap(const void *handle, uint8_t Reg, uint8_t *pData, uint8_t Length) -{ - const TCPP0203_Object_t *pObj = (const TCPP0203_Object_t *)handle; - -#if defined(TCPP0203_REGISTER_CONSISTENCY_CHECK) - Reg0_Expected_Value = *pData; -#endif /* TCPP0203_REGISTER_CONSISTENCY_CHECK */ - - return pObj->IO.WriteReg(pObj->IO.Address, Reg, pData, Length); -} - -/** - * @brief TCPP0203 register update function to Bus IO function - * @param handle Component object handle - * @param Reg Target register address to write - * @param pData Target register value to be written - * @param Length Buffer size to be written - * @retval error status - */ -static int32_t TCPP0203_ModifyReg0(TCPP0203_Object_t *pObj, uint8_t Value, uint8_t Mask) -{ - int32_t ret; - uint8_t tmp; - - /* Read current content of ACK register (reflects content of bits set to 1 in Writing register Reg0) */ - ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_ACK_REG, &tmp, 1); - - /* Update only the area dedicated to Mask */ - tmp &= ~(Mask); - tmp |= (Value & Mask); - -#if defined(TCPP0203_REGISTER_CONSISTENCY_CHECK) - Reg0_Expected_Value = tmp; -#endif /* TCPP0203_REGISTER_CONSISTENCY_CHECK */ - - /* Update value in writing register (reg0) */ - ret += tcpp0203_write_reg(&pObj->Ctx, TCPP0203_PROG_CTRL, &tmp, 1); - -#if defined(TCPP0203_REGISTER_CONSISTENCY_CHECK) - ret += TCPP0203_CheckReg0Reg1(pObj, Reg0_Expected_Value); -#endif /* TCPP0203_REGISTER_CONSISTENCY_CHECK */ - - return ret; -} - -#if defined(TCPP0203_REGISTER_CONSISTENCY_CHECK) -/** - * @brief TCPP0203 register control function between Reg0 and Reg1 value - * @param handle Component object handle - * @param Reg0ExpectedValue Value expected in Reg0 (built after all calls to write functions) - * @retval error status - */ -static int32_t TCPP0203_CheckReg0Reg1(TCPP0203_Object_t *pObj, uint8_t Reg0ExpectedValue) -{ - int32_t ret; - - /* Read current content of ACK register (expected to reflect content of bits set to 1 in Writing register Reg0) */ - ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_ACK_REG, &Reg1_LastRead_Value, 1); - -#ifdef _TRACE - char str[12]; - sprintf(str, "Exp0_0x%02x", Reg0ExpectedValue); - USBPD_TRACE_Add(USBPD_TRACE_DEBUG, 0U, 0U, (uint8_t *)str, sizeof(str) - 1U); - sprintf(str, "Reg1_0x%02x", Reg1_LastRead_Value); - USBPD_TRACE_Add(USBPD_TRACE_DEBUG, 0U, 0U, (uint8_t *)str, sizeof(str) - 1U); -#endif /* _TRACE */ - - /* Control if Reg1 value is same as Reg0 expected one */ - if (Reg1_LastRead_Value != Reg0ExpectedValue) - { - while (1); - } - - return ret; -} -#endif /* TCPP0203_REGISTER_CONSISTENCY_CHECK */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ diff --git a/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/tcpp0203.h b/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/tcpp0203.h deleted file mode 100644 index 271b534fc..000000000 --- a/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/tcpp0203.h +++ /dev/null @@ -1,353 +0,0 @@ -/** - ****************************************************************************** - * @file tcpp0203.h - * @author MCD Application Team - * @brief This file contains all the functions prototypes for the - * tcpp0203.c driver. - ****************************************************************************** - * @attention - * - * Copyright (c) 2021 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef TCPP0203_H -#define TCPP0203_H - -/* Includes ------------------------------------------------------------------*/ -#include "tcpp0203_reg.h" -#include - -/** @addtogroup BSP - * @{ - */ - -/** @addtogroup Component - * @{ - */ - -/** @addtogroup TCPP0203 - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ - -/** @defgroup TCPP0203_Exported_Types TCPP0203 Exported Types - * @{ - */ -typedef int32_t (*TCPP0203_Init_Func)(void); -typedef int32_t (*TCPP0203_DeInit_Func)(void); -typedef int32_t (*TCPP0203_GetTick_Func)(void); -typedef int32_t (*TCPP0203_WriteReg_Func)(uint16_t, uint16_t, uint8_t *, uint16_t); -typedef int32_t (*TCPP0203_ReadReg_Func)(uint16_t, uint16_t, uint8_t *, uint16_t); - -typedef struct -{ - TCPP0203_Init_Func Init; - TCPP0203_DeInit_Func DeInit; - uint16_t Address; - TCPP0203_WriteReg_Func WriteReg; - TCPP0203_ReadReg_Func ReadReg; - TCPP0203_GetTick_Func GetTick; -} TCPP0203_IO_t; - - -typedef struct -{ - TCPP0203_IO_t IO; - TCPP0203_ctx_t Ctx; - uint8_t IsInitialized; -} TCPP0203_Object_t; - -typedef struct -{ - int32_t (*Init)(TCPP0203_Object_t *); - int32_t (*DeInit)(TCPP0203_Object_t *); - int32_t (*Reset)(TCPP0203_Object_t *); - int32_t (*SetVConnSwitch)(TCPP0203_Object_t *, uint8_t); - int32_t (*SetGateDriverProvider)(TCPP0203_Object_t *, uint8_t); - int32_t (*SetGateDriverConsumer)(TCPP0203_Object_t *, uint8_t); - int32_t (*SetPowerMode)(TCPP0203_Object_t *, uint8_t); - int32_t (*SetVBusDischarge)(TCPP0203_Object_t *, uint8_t); - int32_t (*SetVConnDischarge)(TCPP0203_Object_t *, uint8_t); - int32_t (*GetVConnSwitchAck)(TCPP0203_Object_t *, uint8_t *); - int32_t (*GetGateDriverProviderAck)(TCPP0203_Object_t *, uint8_t *); - int32_t (*GetGateDriverConsumerAck)(TCPP0203_Object_t *, uint8_t *); - int32_t (*GetPowerModeAck)(TCPP0203_Object_t *, uint8_t *); - int32_t (*GetVBusDischargeAck)(TCPP0203_Object_t *, uint8_t *); - int32_t (*GetVConnDischargeAck)(TCPP0203_Object_t *, uint8_t *); - int32_t (*GetOCPVConnFlag)(TCPP0203_Object_t *, uint8_t *); - int32_t (*GetOCPVBusFlag)(TCPP0203_Object_t *, uint8_t *); - int32_t (*GetOVPVBusFlag)(TCPP0203_Object_t *, uint8_t *); - int32_t (*GetOVPCCFlag)(TCPP0203_Object_t *, uint8_t *); - int32_t (*GetOTPFlag)(TCPP0203_Object_t *, uint8_t *); - int32_t (*GetVBusOkFlag)(TCPP0203_Object_t *, uint8_t *); - int32_t (*ReadTCPPType)(TCPP0203_Object_t *, uint8_t *); - int32_t (*ReadVCONNPower)(TCPP0203_Object_t *, uint8_t *); - int32_t (*WriteCtrlRegister)(TCPP0203_Object_t *, uint8_t *); - int32_t (*ReadAckRegister)(TCPP0203_Object_t *, uint8_t *); - int32_t (*ReadFlagRegister)(TCPP0203_Object_t *, uint8_t *); -} TCPP0203_Drv_t; - -/** - * @} - */ - -/** @defgroup TCPP0203_Exported_Constants TCPP0203 Exported Constants - * @{ - */ -/** - * @brief TCPP0203 Driver Response codes - */ -#define TCPP0203_OK (0) -#define TCPP0203_ERROR (-1) - -/** - * @brief TCPP0203 possible I2C Addresses - */ -#define TCPP0203_I2C_ADDRESS_X68 (0x68U) -#define TCPP0203_I2C_ADDRESS_X6A (0x6AU) - -/** - * @brief TCPP0203 Reg0 Reset Value - */ -#define TCPP0203_REG0_RST_VALUE TCPP0203_GD_CONSUMER_SWITCH_CLOSED - -/** - * @brief TCPP0203 VCONN Switch - */ -#define TCPP0203_VCONN_SWITCH_POS (0U) -#define TCPP0203_VCONN_SWITCH_MSK (0x03U << TCPP0203_VCONN_SWITCH_POS) -#define TCPP0203_VCONN_SWITCH_OPEN (0x00U) -#define TCPP0203_VCONN_SWITCH_CC1 (0x01U << TCPP0203_VCONN_SWITCH_POS) -#define TCPP0203_VCONN_SWITCH_CC2 (0x02U << TCPP0203_VCONN_SWITCH_POS) - -/** - * @brief TCPP0203 Gate Driver Provider values - */ -#define TCPP0203_GD_PROVIDER_SWITCH_POS (2U) -#define TCPP0203_GD_PROVIDER_SWITCH_MSK (0x01U << TCPP0203_GD_PROVIDER_SWITCH_POS) -#define TCPP0203_GD_PROVIDER_SWITCH_OPEN (0x00U) -#define TCPP0203_GD_PROVIDER_SWITCH_CLOSED (TCPP0203_GD_PROVIDER_SWITCH_MSK) - -/** - * @brief TCPP0203 Gate Driver Consumer values - */ -#define TCPP0203_GD_CONSUMER_SWITCH_POS (3U) -#define TCPP0203_GD_CONSUMER_SWITCH_MSK (0x01U << TCPP0203_GD_CONSUMER_SWITCH_POS) -#define TCPP0203_GD_CONSUMER_SWITCH_CLOSED (0x00U) -#define TCPP0203_GD_CONSUMER_SWITCH_OPEN (TCPP0203_GD_CONSUMER_SWITCH_MSK) - -/** - * @brief TCPP0203 Power Mode values - */ -#define TCPP0203_POWER_MODE_POS (4U) -#define TCPP0203_POWER_MODE_MSK (0x03U << TCPP0203_POWER_MODE_POS) -#define TCPP0203_POWER_MODE_HIBERNATE (0x00U) -#define TCPP0203_POWER_MODE_LOWPOWER (0x02U << TCPP0203_POWER_MODE_POS) -#define TCPP0203_POWER_MODE_NORMAL (0x01U << TCPP0203_POWER_MODE_POS) - -/** - * @brief TCPP0203 VBUS Discharge management - */ -#define TCPP0203_VBUS_DISCHARGE_POS (6U) -#define TCPP0203_VBUS_DISCHARGE_MSK (0x01U << TCPP0203_VBUS_DISCHARGE_POS) -#define TCPP0203_VBUS_DISCHARGE_OFF (0x00U) -#define TCPP0203_VBUS_DISCHARGE_ON (TCPP0203_VBUS_DISCHARGE_MSK) - -/** - * @brief TCPP0203 VConn Discharge management - */ -#define TCPP0203_VCONN_DISCHARGE_POS (7U) -#define TCPP0203_VCONN_DISCHARGE_MSK (0x01U << TCPP0203_VCONN_DISCHARGE_POS) -#define TCPP0203_VCONN_DISCHARGE_OFF (0x00U) -#define TCPP0203_VCONN_DISCHARGE_ON (TCPP0203_VCONN_DISCHARGE_MSK) - -/** - * @brief TCPP0203 VCONN Switch Acknowledge - */ -#define TCPP0203_VCONN_SWITCH_ACK_POS (0U) -#define TCPP0203_VCONN_SWITCH_ACK_MSK (0x03U << TCPP0203_VCONN_SWITCH_ACK_POS) -#define TCPP0203_VCONN_SWITCH_ACK_OPEN (0x00U) -#define TCPP0203_VCONN_SWITCH_ACK_CC1 (0x02U << TCPP0203_VCONN_SWITCH_ACK_POS) -#define TCPP0203_VCONN_SWITCH_ACK_CC2 (0x01U << TCPP0203_VCONN_SWITCH_ACK_POS) - -/** - * @brief TCPP0203 Gate Driver Provider Acknowledge - */ -#define TCPP0203_GD_PROVIDER_SWITCH_ACK_POS (2U) -#define TCPP0203_GD_PROVIDER_SWITCH_ACK_MSK (0x01U << TCPP0203_GD_PROVIDER_SWITCH_ACK_POS) -#define TCPP0203_GD_PROVIDER_SWITCH_ACK_OPEN (0x00U) -#define TCPP0203_GD_PROVIDER_SWITCH_ACK_CLOSED (TCPP0203_GD_PROVIDER_SWITCH_ACK_MSK) - -/** - * @brief TCPP0203 Gate Driver Consumer Acknowledge - */ -#define TCPP0203_GD_CONSUMER_SWITCH_ACK_POS (3U) -#define TCPP0203_GD_CONSUMER_SWITCH_ACK_MSK (0x01U << TCPP0203_GD_CONSUMER_SWITCH_ACK_POS) -#define TCPP0203_GD_CONSUMER_SWITCH_ACK_CLOSED (0x00U) -#define TCPP0203_GD_CONSUMER_SWITCH_ACK_OPEN (TCPP0203_GD_CONSUMER_SWITCH_ACK_MSK) - -/** - * @brief TCPP0203 Power Mode Acknowledge - */ -#define TCPP0203_POWER_MODE_ACK_POS (4U) -#define TCPP0203_POWER_MODE_ACK_MSK (0x03U << TCPP0203_POWER_MODE_ACK_POS) -#define TCPP0203_POWER_MODE_ACK_HIBERNATE (0x00U) -#define TCPP0203_POWER_MODE_ACK_LOWPOWER (0x01U << TCPP0203_POWER_MODE_ACK_POS) -#define TCPP0203_POWER_MODE_ACK_NORMAL (0x02U << TCPP0203_POWER_MODE_ACK_POS) - -/** - * @brief TCPP0203 VBUS Discharge Acknowledge - */ -#define TCPP0203_VBUS_DISCHARGE_ACK_POS (6U) -#define TCPP0203_VBUS_DISCHARGE_ACK_MSK (0x01U << TCPP0203_VBUS_DISCHARGE_ACK_POS) -#define TCPP0203_VBUS_DISCHARGE_ACK_OFF (0x00U) -#define TCPP0203_VBUS_DISCHARGE_ACK_ON (TCPP0203_VBUS_DISCHARGE_ACK_MSK) - -/** - * @brief TCPP0203 VConn Discharge Acknowledge - */ -#define TCPP0203_VCONN_DISCHARGE_ACK_POS (7U) -#define TCPP0203_VCONN_DISCHARGE_ACK_MSK (0x01U << TCPP0203_VCONN_DISCHARGE_ACK_POS) -#define TCPP0203_VCONN_DISCHARGE_ACK_OFF (0x00U) -#define TCPP0203_VCONN_DISCHARGE_ACK_ON (TCPP0203_VCONN_DISCHARGE_ACK_MSK) - -/** - * @brief TCPP0203 OCP Vconn Flag management - */ -#define TCPP0203_FLAG_OCP_VCONN_POS (0U) -#define TCPP0203_FLAG_OCP_VCONN_MSK (0x01U << TCPP0203_FLAG_OCP_VCONN_POS) -#define TCPP0203_FLAG_OCP_VCONN_SET (TCPP0203_FLAG_OCP_VCONN_MSK) -#define TCPP0203_FLAG_OCP_VCONN_RESET (0x00U) - -/** - * @brief TCPP0203 OCP VBUS Flag management - */ -#define TCPP0203_FLAG_OCP_VBUS_POS (1U) -#define TCPP0203_FLAG_OCP_VBUS_MSK (0x01U << TCPP0203_FLAG_OCP_VBUS_POS) -#define TCPP0203_FLAG_OCP_VBUS_SET (TCPP0203_FLAG_OCP_VBUS_MSK) -#define TCPP0203_FLAG_OCP_VBUS_RESET (0x00U) - -/** - * @brief TCPP0203 OVP VBUS Flag management - */ -#define TCPP0203_FLAG_OVP_VBUS_POS (2U) -#define TCPP0203_FLAG_OVP_VBUS_MSK (0x01U << TCPP0203_FLAG_OVP_VBUS_POS) -#define TCPP0203_FLAG_OVP_VBUS_SET (TCPP0203_FLAG_OVP_VBUS_MSK) -#define TCPP0203_FLAG_OVP_VBUS_RESET (0x00U) - -/** - * @brief TCPP0203 OVP CC Flag management - */ -#define TCPP0203_FLAG_OVP_CC_POS (3U) -#define TCPP0203_FLAG_OVP_CC_MSK (0x01U << TCPP0203_FLAG_OVP_CC_POS) -#define TCPP0203_FLAG_OVP_CC_SET (TCPP0203_FLAG_OVP_CC_MSK) -#define TCPP0203_FLAG_OVP_CC_RESET (0x00U) - -/** - * @brief TCPP0203 OTP Flag management - */ -#define TCPP0203_FLAG_OTP_POS (4U) -#define TCPP0203_FLAG_OTP_MSK (0x01U << TCPP0203_FLAG_OTP_POS) -#define TCPP0203_FLAG_OTP_SET (TCPP0203_FLAG_OTP_MSK) -#define TCPP0203_FLAG_OTP_RESET (0x00U) - -/** - * @brief TCPP0203 VBUS OK Flag management - */ -#define TCPP0203_FLAG_VBUS_OK_POS (5U) -#define TCPP0203_FLAG_VBUS_OK_MSK (0x01U << TCPP0203_FLAG_VBUS_OK_POS) -#define TCPP0203_FLAG_VBUS_OK_SET (TCPP0203_FLAG_VBUS_OK_MSK) -#define TCPP0203_FLAG_VBUS_OK_RESET (0x00U) - -/** - * @brief TCPP0203 VConn Power - */ -#define TCPP0203_FLAG_VCONN_PWR_POS (6U) -#define TCPP0203_FLAG_VCONN_PWR_MSK (0x01U << TCPP0203_FLAG_VCONN_PWR_POS) -#define TCPP0203_FLAG_VCONN_PWR_1W (TCPP0203_FLAG_VCONN_PWR_MSK) -#define TCPP0203_FLAG_VCONN_PWR_0_1W (0x00U) - -/** - * @brief TCPP0203 Device Type - */ -#define TCPP0203_DEVICE_TYPE_POS (7U) -#define TCPP0203_DEVICE_TYPE_MSK (0x01U << TCPP0203_DEVICE_TYPE_POS) -#define TCPP0203_DEVICE_TYPE_02 (TCPP0203_DEVICE_TYPE_MSK) -#define TCPP0203_DEVICE_TYPE_03 (0x00U) - -/** - * @} - */ - -/** @defgroup TCPP0203_Exported_Macros TCPP0203 Exported Macros - * @{ - */ -/** - * @} - */ - -/** @defgroup TCPP0203_Exported_Functions TCPP0203 Exported Functions - * @{ - */ - -/*------------------------------------------------------------------------------ - TCPP02/03 Type-C port protection functions -------------------------------------------------------------------------------*/ -/* High Layer codec functions */ -int32_t TCPP0203_RegisterBusIO(TCPP0203_Object_t *pObj, TCPP0203_IO_t *pIO); -int32_t TCPP0203_Init(TCPP0203_Object_t *pObj); -int32_t TCPP0203_DeInit(TCPP0203_Object_t *pObj); -int32_t TCPP0203_Reset(TCPP0203_Object_t *pObj); -int32_t TCPP0203_SetVConnSwitch(TCPP0203_Object_t *pObj, uint8_t VConnSwitch); -int32_t TCPP0203_SetGateDriverProvider(TCPP0203_Object_t *pObj, uint8_t GateDriverProvider); -int32_t TCPP0203_SetGateDriverConsumer(TCPP0203_Object_t *pObj, uint8_t GateDriverConsumer); -int32_t TCPP0203_SetPowerMode(TCPP0203_Object_t *pObj, uint8_t PowerMode); -int32_t TCPP0203_SetVBusDischarge(TCPP0203_Object_t *pObj, uint8_t VBusDischarge); -int32_t TCPP0203_SetVConnDischarge(TCPP0203_Object_t *pObj, uint8_t VConnDischarge); -int32_t TCPP0203_GetVConnSwitchAck(TCPP0203_Object_t *pObj, uint8_t *pVConnSwitchAck); -int32_t TCPP0203_GetGateDriverProviderAck(TCPP0203_Object_t *pObj, uint8_t *pGateDriverProviderAck); -int32_t TCPP0203_GetGateDriverConsumerAck(TCPP0203_Object_t *pObj, uint8_t *pGateDriverConsumerAck); -int32_t TCPP0203_GetPowerModeAck(TCPP0203_Object_t *pObj, uint8_t *pPowerModeAck); -int32_t TCPP0203_GetVBusDischargeAck(TCPP0203_Object_t *pObj, uint8_t *pVBusDischargeAck); -int32_t TCPP0203_GetVConnDischargeAck(TCPP0203_Object_t *pObj, uint8_t *pVConnDischargeAck); -int32_t TCPP0203_GetOCPVConnFlag(TCPP0203_Object_t *pObj, uint8_t *pOCPVConnFlag); -int32_t TCPP0203_GetOCPVBusFlag(TCPP0203_Object_t *pObj, uint8_t *pGetOCPVBusFlag); -int32_t TCPP0203_GetOVPVBusFlag(TCPP0203_Object_t *pObj, uint8_t *pOVPVBusFlag); -int32_t TCPP0203_GetOVPCCFlag(TCPP0203_Object_t *pObj, uint8_t *pOVPCCFlag); -int32_t TCPP0203_GetOTPFlag(TCPP0203_Object_t *pObj, uint8_t *pOTPFlag); -int32_t TCPP0203_GetVBusOkFlag(TCPP0203_Object_t *pObj, uint8_t *pVBusOkFlag); -int32_t TCPP0203_ReadTCPPType(TCPP0203_Object_t *pObj, uint8_t *pTCPPType); -int32_t TCPP0203_ReadVCONNPower(TCPP0203_Object_t *pObj, uint8_t *pVCONNPower); -int32_t TCPP0203_WriteCtrlRegister(TCPP0203_Object_t *pObj, uint8_t *pCtrlRegister); -int32_t TCPP0203_ReadAckRegister(TCPP0203_Object_t *pObj, uint8_t *pAckRegister); -int32_t TCPP0203_ReadFlagRegister(TCPP0203_Object_t *pObj, uint8_t *pFlagRegister); - -/** - * @} - */ - -/* TCPP02/03 Type-C port protection driver structure */ -extern TCPP0203_Drv_t TCPP0203_Driver; - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* TCPP0203_H */ diff --git a/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/tcpp0203_reg.c b/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/tcpp0203_reg.c deleted file mode 100644 index 8025fa85e..000000000 --- a/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/tcpp0203_reg.c +++ /dev/null @@ -1,73 +0,0 @@ -/** - ****************************************************************************** - * @file tcpp0203_reg.c - * @author MCD Application Team - * @brief This file provides unitary register function to control the TCPP02-03 - * Type-C port protection driver. - ****************************************************************************** - * @attention - * - * Copyright (c) 2021 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "tcpp0203_reg.h" - -/** @addtogroup BSP - * @{ - */ - -/** @addtogroup Components - * @{ - */ - -/** @addtogroup TCPP0203 - * @brief This file provides a set of functions needed to drive the - * TCPP02/03 Type-C port protection codec. - * @{ - */ - -/************** Generic Function *******************/ -/******************************************************************************* - * Function Name : tcpp0203_read_reg - * Description : Generic Reading function. It must be fulfilled with either - * I2C or SPI reading functions - * Input : Register Address, length of buffer - * Output : data Read - *******************************************************************************/ -int32_t tcpp0203_read_reg(const TCPP0203_ctx_t *ctx, uint8_t reg, uint8_t *data, uint8_t length) -{ - return ctx->ReadReg(ctx->handle, reg, data, length); -} - -/******************************************************************************* - * Function Name : tcpp0203_write_reg - * Description : Generic Writing function. It must be fulfilled with either - * I2C or SPI writing function - * Input : Register Address, data to be written, length of buffer - * Output : None - *******************************************************************************/ -int32_t tcpp0203_write_reg(const TCPP0203_ctx_t *ctx, uint8_t reg, uint8_t *data, uint8_t length) -{ - return ctx->WriteReg(ctx->handle, reg, data, length); -} - -/******************************************************************************/ -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ diff --git a/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/tcpp0203_reg.h b/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/tcpp0203_reg.h deleted file mode 100644 index 92420e1fe..000000000 --- a/hw/bsp/stm32h7rs/boards/stm32h7s3nucleo/tcpp0203/tcpp0203_reg.h +++ /dev/null @@ -1,98 +0,0 @@ -/** - ****************************************************************************** - * @file tcpp0203_reg.h - * @author MCD Application Team - * @brief Header of tcpp0203_reg.c - * - ****************************************************************************** - * @attention - * - * Copyright (c) 2021 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef TCPP0203_REG_H -#define TCPP0203_REG_H - -#include - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -/** @addtogroup BSP - * @{ - */ - -/** @addtogroup Component - * @{ - */ - -/** @addtogroup TCPP0203 - * @{ - */ - - -/** @defgroup TCPP0203_Exported_Constants TCPP0203 Exported Constants - * @{ - */ -/******************************************************************************/ -/****************************** REGISTER MAPPING ******************************/ -/******************************************************************************/ -#define TCPP0203_WRITE_REG 0x00U -#define TCPP0203_PROG_CTRL TCPP0203_WRITE_REG -#define TCPP0203_READ_REG1 0x01U -#define TCPP0203_ACK_REG TCPP0203_READ_REG1 -#define TCPP0203_READ_REG2 0x02U -#define TCPP0203_FLAG_REG TCPP0203_READ_REG2 - -/** - * @} - */ - -/************** Generic Function *******************/ - -typedef int32_t (*TCPP0203_Write_Func)(const void *, uint8_t, uint8_t *, uint8_t); -typedef int32_t (*TCPP0203_Read_Func)(const void *, uint8_t, uint8_t *, uint8_t); - -typedef struct -{ - TCPP0203_Write_Func WriteReg; - TCPP0203_Read_Func ReadReg; - void *handle; -} TCPP0203_ctx_t; - -/******************************************************************************* - * Register : Generic - All - * Address : Generic - All - * Bit Group Name: None - * Permission : W - *******************************************************************************/ -int32_t tcpp0203_write_reg(const TCPP0203_ctx_t *ctx, uint8_t reg, uint8_t *data, uint8_t length); -int32_t tcpp0203_read_reg(const TCPP0203_ctx_t *ctx, uint8_t reg, uint8_t *data, uint8_t length); - -#ifdef __cplusplus -} -#endif - -#endif /* TCPP0203_REG_H */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ diff --git a/hw/bsp/stm32h7rs/family.cmake b/hw/bsp/stm32h7rs/family.cmake index 61c3ebaea..e5e98f914 100644 --- a/hw/bsp/stm32h7rs/family.cmake +++ b/hw/bsp/stm32h7rs/family.cmake @@ -5,6 +5,7 @@ set(ST_PREFIX stm32${ST_FAMILY}xx) set(ST_HAL_DRIVER ${TOP}/hw/mcu/st/stm32${ST_FAMILY}xx_hal_driver) set(ST_CMSIS ${TOP}/hw/mcu/st/cmsis_device_${ST_FAMILY}) +set(ST_TCPP0203 ${TOP}/hw/mcu/st/stm32-tcpp0203) set(CMSIS_5 ${TOP}/lib/CMSIS_5) # include board specific @@ -86,6 +87,8 @@ function(add_board_target BOARD_TARGET) BOARD_TUD_MAX_SPEED=${RHPORT_DEVICE_SPEED} BOARD_TUH_RHPORT=${RHPORT_HOST} BOARD_TUH_MAX_SPEED=${RHPORT_HOST_SPEED} + SEGGER_RTT_SECTION="noncacheable_buffer" + BUFFER_SIZE_UP=0x3000 ) update_board(${BOARD_TARGET}) diff --git a/hw/bsp/stm32h7rs/family.mk b/hw/bsp/stm32h7rs/family.mk index d679b72f1..9970059f8 100644 --- a/hw/bsp/stm32h7rs/family.mk +++ b/hw/bsp/stm32h7rs/family.mk @@ -2,6 +2,7 @@ ST_FAMILY = h7rs ST_PREFIX = stm32${ST_FAMILY}xx ST_CMSIS = hw/mcu/st/cmsis_device_$(ST_FAMILY) ST_HAL_DRIVER = hw/mcu/st/${ST_PREFIX}_hal_driver +ST_TCPP0203 = hw/mcu/st/stm32-tcpp0203 UF2_FAMILY_ID = 0x6db66083 @@ -42,6 +43,8 @@ CFLAGS += \ -DBOARD_TUD_MAX_SPEED=${RHPORT_DEVICE_SPEED} \ -DBOARD_TUH_RHPORT=${RHPORT_HOST} \ -DBOARD_TUH_MAX_SPEED=${RHPORT_HOST_SPEED} \ + -DSEGGER_RTT_SECTION=\"noncacheable_buffer\" \ + -DBUFFER_SIZE_UP=0x3000 \ # GCC Flags CFLAGS_GCC += \ diff --git a/hw/bsp/stm32n6/boards/stm32n657nucleo/board.cmake b/hw/bsp/stm32n6/boards/stm32n657nucleo/board.cmake index 789eb9a2e..e88efefb9 100644 --- a/hw/bsp/stm32n6/boards/stm32n657nucleo/board.cmake +++ b/hw/bsp/stm32n6/boards/stm32n657nucleo/board.cmake @@ -7,13 +7,11 @@ function(update_board TARGET) target_compile_definitions(${TARGET} PUBLIC STM32N657xx ) - target_sources(${TARGET} PUBLIC - # BSP - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/tcpp0203/tcpp0203.c - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/tcpp0203/tcpp0203_reg.c + ${ST_TCPP0203}/tcpp0203.c + ${ST_TCPP0203}/tcpp0203_reg.c ) target_include_directories(${TARGET} PUBLIC - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/tcpp0203 + ${ST_TCPP0203} ) endfunction() diff --git a/hw/bsp/stm32n6/boards/stm32n657nucleo/board.mk b/hw/bsp/stm32n6/boards/stm32n657nucleo/board.mk index bfbe5b23c..05717699c 100644 --- a/hw/bsp/stm32n6/boards/stm32n657nucleo/board.mk +++ b/hw/bsp/stm32n6/boards/stm32n657nucleo/board.mk @@ -10,8 +10,8 @@ flash: flash-stlink PORT = 1 SRC_C += \ - $(BOARD_PATH)/tcpp0203/tcpp0203.c \ - $(BOARD_PATH)/tcpp0203/tcpp0203_reg.c \ + $(ST_TCPP0203)/tcpp0203.c \ + $(ST_TCPP0203)/tcpp0203_reg.c \ INC += \ - $(TOP)/$(BOARD_PATH)/tcpp0203 \ + $(TOP)/$(ST_TCPP0203) \ diff --git a/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/LICENSE.txt b/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/LICENSE.txt deleted file mode 100644 index 1cbbc544a..000000000 --- a/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/LICENSE.txt +++ /dev/null @@ -1,6 +0,0 @@ -This software component is provided to you as part of a software package and -applicable license terms are in the Package_license file. If you received this -software component outside of a package or without applicable license terms, -the terms of the BSD-3-Clause license shall apply. -You may obtain a copy of the BSD-3-Clause at: -https://opensource.org/licenses/BSD-3-Clause diff --git a/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/Release_Notes.html b/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/Release_Notes.html deleted file mode 100644 index 6bbba86a4..000000000 --- a/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/Release_Notes.html +++ /dev/null @@ -1,205 +0,0 @@ - - - - - - - Release Notes for TCPP0203 Component Driver - - - - - - -
-
-
-

Release Notes for TCPP0203 Component Driver

-

Copyright © 2020 STMicroelectronics
-

- -
-

Purpose

-

This driver provides a set of functions needed to drive TCPP0203 Type-C Port Protection component

-
-
-

Update History

-
- -
-

Main Changes

-

Maintenance release

-

Contents

- - - - - - - - - - - -
Headline
MISRA Rule-81.13 correction on TCPP0203 component driver files
-

Backward compatibility

-

No compatibility break with previous version

-

Dependencies

-
-
-
- -
-

Main Changes

-

Maintenance release

-

Contents

- - - - - - - - - - - - -
Fixed bugs list
Headline
MISRA corrections on TCPP0203 component driver files
-

Known Limitations

-

Outstanding bugs list : None

-

Requirements not met or planned in a forthcoming release : None

-

Development Toolchains and Compilers

-
    -
  • IAR Embedded Workbench for ARM (EWARM) toolchain V8.32.3
    • -
  • RealView Microcontroller Development Kit (MDK-ARM) toolchain V5.27.1
    • -
  • STM32CubeIDE toolchain V1.8.0
    • -
-

Backward compatibility

-

No compatibility break with previous version

-

Dependencies

-
-
-
- -
-

Main Changes

-

Maintenance release

-

Contents

- - - - - - - - - - - - -
Fixed bugs list
Headline
License updates
-

Known Limitations

-

Outstanding bugs list : None

-

Requirements not met or planned in a forthcoming release : None

-

Development Toolchains and Compilers

-
    -
  • IAR Embedded Workbench for ARM (EWARM) toolchain V8.32.3
    • -
  • RealView Microcontroller Development Kit (MDK-ARM) toolchain V5.27.1
    • -
  • STM32CubeIDE toolchain V1.6.0
    • -
-

Backward compatibility

-

No compatibility break with previous version

-

Dependencies

-
-
-
- -
-

Main Changes

-

Maintenance release

-

Contents

- - - - - - - - - - - - -
Fixed bugs list
Headline
CodeSpell correction on TCPP0203 component driver files
-

Known Limitations

-

Outstanding bugs list : None

-

Requirements not met or planned in a forthcoming release : None

-

Development Toolchains and Compilers

-
    -
  • IAR Embedded Workbench for ARM (EWARM) toolchain V8.32.3
    • -
  • RealView Microcontroller Development Kit (MDK-ARM) toolchain V5.27.1
    • -
  • STM32CubeIDE toolchain V1.5.0
    • -
-

Backward compatibility

-

No compatibility break with previous version

-

Dependencies

-
-
-
- -
-

Main Changes

-

Maintenance release

-

Contents

- - - - - - - - - - - - -
Fixed bugs list
Headline
MCUAstyle correction on TCPP0203 component driver files
-

Known Limitations

-

Outstanding bugs list : None

-

Requirements not met or planned in a forthcoming release : None

-

Development Toolchains and Compilers

-
    -
  • IAR Embedded Workbench for ARM (EWARM) toolchain V8.32.3
    • -
  • RealView Microcontroller Development Kit (MDK-ARM) toolchain V5.27.1
    • -
  • STM32CubeIDE toolchain V1.5.0
    • -
-

Backward compatibility

-

No compatibility break with previous version

-

Dependencies

-
-
-
- -
-

Main Changes

-
    -
  • First official release of TCPP0203 Type-C port Protection Component drivers
    • -
-
-
-
-
-
-

For complete documentation on STM32,visit: [www.st.com/stm32]

-This release note uses up to date web standards and, for this reason, should not be opened with Internet Explorer but preferably with popular browsers such as Google Chrome, Mozilla Firefox, Opera or Microsoft Edge. -
- - diff --git a/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/_htmresc/favicon.png b/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/_htmresc/favicon.png deleted file mode 100644 index 06713eec4..000000000 Binary files a/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/_htmresc/favicon.png and /dev/null differ diff --git a/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/_htmresc/mini-st_2020.css b/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/_htmresc/mini-st_2020.css deleted file mode 100644 index dd19969d1..000000000 --- a/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/_htmresc/mini-st_2020.css +++ /dev/null @@ -1,1703 +0,0 @@ -@charset "UTF-8"; -/* - Flavor name: Custom (mini-custom) - Generated online - https://minicss.org/flavors - mini.css version: v3.0.1 -*/ -/* - Browsers resets and base typography. -*/ -/* Core module CSS variable definitions */ -:root { - --fore-color: #03234b; - --secondary-fore-color: #03234b; - --back-color: #ffffff; - --secondary-back-color: #ffffff; - --blockquote-color: #e6007e; - --pre-color: #e6007e; - --border-color: #3cb4e6; - --secondary-border-color: #3cb4e6; - --heading-ratio: 1.2; - --universal-margin: 0.5rem; - --universal-padding: 0.25rem; - --universal-border-radius: 0.075rem; - --background-margin: 1.5%; - --a-link-color: #3cb4e6; - --a-visited-color: #8c0078; } - -html { - font-size: 13.5px; } - -a, b, del, em, i, ins, q, span, strong, u { - font-size: 1em; } - -html, * { - font-family: -apple-system, BlinkMacSystemFont, Helvetica, arial, sans-serif; - line-height: 1.25; - -webkit-text-size-adjust: 100%; } - -* { - font-size: 1rem; } - -body { - margin: 0; - color: var(--fore-color); - @background: var(--back-color); - background: var(--back-color) linear-gradient(#ffd200, #ffd200) repeat-y left top; - background-size: var(--background-margin); - } - -details { - display: block; } - -summary { - display: list-item; } - -abbr[title] { - border-bottom: none; - text-decoration: underline dotted; } - -input { - overflow: visible; } - -img { - max-width: 100%; - height: auto; } - -h1, h2, h3, h4, h5, h6 { - line-height: 1.25; - margin: calc(1.5 * var(--universal-margin)) var(--universal-margin); - font-weight: 400; } - h1 small, h2 small, h3 small, h4 small, h5 small, h6 small { - color: var(--secondary-fore-color); - display: block; - margin-top: -0.25rem; } - -h1 { - font-size: calc(1rem * var(--heading-ratio) * var(--heading-ratio) * var(--heading-ratio)); } - -h2 { - font-size: calc(1rem * var(--heading-ratio) * var(--heading-ratio) ); - border-style: none none solid none ; - border-width: thin; - border-color: var(--border-color); } -h3 { - font-size: calc(1rem * var(--heading-ratio) ); } - -h4 { - font-size: calc(1rem * var(--heading-ratio)); } - -h5 { - font-size: 1rem; } - -h6 { - font-size: calc(1rem / var(--heading-ratio)); } - -p { - margin: var(--universal-margin); } - -ol, ul { - margin: var(--universal-margin); - padding-left: calc(3 * var(--universal-margin)); } - -b, strong { - font-weight: 700; } - -hr { - box-sizing: content-box; - border: 0; - line-height: 1.25em; - margin: var(--universal-margin); - height: 0.0714285714rem; - background: linear-gradient(to right, transparent, var(--border-color) 20%, var(--border-color) 80%, transparent); } - -blockquote { - display: block; - position: relative; - font-style: italic; - color: var(--secondary-fore-color); - margin: var(--universal-margin); - padding: calc(3 * var(--universal-padding)); - border: 0.0714285714rem solid var(--secondary-border-color); - border-left: 0.3rem solid var(--blockquote-color); - border-radius: 0 var(--universal-border-radius) var(--universal-border-radius) 0; } - blockquote:before { - position: absolute; - top: calc(0rem - var(--universal-padding)); - left: 0; - font-family: sans-serif; - font-size: 2rem; - font-weight: 800; - content: "\201c"; - color: var(--blockquote-color); } - blockquote[cite]:after { - font-style: normal; - font-size: 0.75em; - font-weight: 700; - content: "\a— " attr(cite); - white-space: pre; } - -code, kbd, pre, samp { - font-family: Menlo, Consolas, monospace; - font-size: 0.85em; } - -code { - background: var(--secondary-back-color); - border-radius: var(--universal-border-radius); - padding: calc(var(--universal-padding) / 4) calc(var(--universal-padding) / 2); } - -kbd { - background: var(--fore-color); - color: var(--back-color); - border-radius: var(--universal-border-radius); - padding: calc(var(--universal-padding) / 4) calc(var(--universal-padding) / 2); } - -pre { - overflow: auto; - background: var(--secondary-back-color); - padding: calc(1.5 * var(--universal-padding)); - margin: var(--universal-margin); - border: 0.0714285714rem solid var(--secondary-border-color); - border-left: 0.2857142857rem solid var(--pre-color); - border-radius: 0 var(--universal-border-radius) var(--universal-border-radius) 0; } - -sup, sub, code, kbd { - line-height: 0; - position: relative; - vertical-align: baseline; } - -small, sup, sub, figcaption { - font-size: 0.75em; } - -sup { - top: -0.5em; } - -sub { - bottom: -0.25em; } - -figure { - margin: var(--universal-margin); } - -figcaption { - color: var(--secondary-fore-color); } - -a { - text-decoration: none; } - a:link { - color: var(--a-link-color); } - a:visited { - color: var(--a-visited-color); } - a:hover, a:focus { - text-decoration: underline; } - -/* - Definitions for the grid system, cards and containers. -*/ -.container { - margin: 0 auto; - padding: 0 calc(1.5 * var(--universal-padding)); } - -.row { - box-sizing: border-box; - display: flex; - flex: 0 1 auto; - flex-flow: row wrap; - margin: 0 0 0 var(--background-margin); } - -.col-sm, -[class^='col-sm-'], -[class^='col-sm-offset-'], -.row[class*='cols-sm-'] > * { - box-sizing: border-box; - flex: 0 0 auto; - padding: 0 calc(var(--universal-padding) / 2); } - -.col-sm, -.row.cols-sm > * { - max-width: 100%; - flex-grow: 1; - flex-basis: 0; } - -.col-sm-1, -.row.cols-sm-1 > * { - max-width: 8.3333333333%; - flex-basis: 8.3333333333%; } - -.col-sm-offset-0 { - margin-left: 0; } - -.col-sm-2, -.row.cols-sm-2 > * { - max-width: 16.6666666667%; - flex-basis: 16.6666666667%; } - -.col-sm-offset-1 { - margin-left: 8.3333333333%; } - -.col-sm-3, -.row.cols-sm-3 > * { - max-width: 25%; - flex-basis: 25%; } - -.col-sm-offset-2 { - margin-left: 16.6666666667%; } - -.col-sm-4, -.row.cols-sm-4 > * { - max-width: 33.3333333333%; - flex-basis: 33.3333333333%; } - -.col-sm-offset-3 { - margin-left: 25%; } - -.col-sm-5, -.row.cols-sm-5 > * { - max-width: 41.6666666667%; - flex-basis: 41.6666666667%; } - -.col-sm-offset-4 { - margin-left: 33.3333333333%; } - -.col-sm-6, -.row.cols-sm-6 > * { - max-width: 50%; - flex-basis: 50%; } - -.col-sm-offset-5 { - margin-left: 41.6666666667%; } - -.col-sm-7, -.row.cols-sm-7 > * { - max-width: 58.3333333333%; - flex-basis: 58.3333333333%; } - -.col-sm-offset-6 { - margin-left: 50%; } - -.col-sm-8, -.row.cols-sm-8 > * { - max-width: 66.6666666667%; - flex-basis: 66.6666666667%; } - -.col-sm-offset-7 { - margin-left: 58.3333333333%; } - -.col-sm-9, -.row.cols-sm-9 > * { - max-width: 75%; - flex-basis: 75%; } - -.col-sm-offset-8 { - margin-left: 66.6666666667%; } - -.col-sm-10, -.row.cols-sm-10 > * { - max-width: 83.3333333333%; - flex-basis: 83.3333333333%; } - -.col-sm-offset-9 { - margin-left: 75%; } - -.col-sm-11, -.row.cols-sm-11 > * { - max-width: 91.6666666667%; - flex-basis: 91.6666666667%; } - -.col-sm-offset-10 { - margin-left: 83.3333333333%; } - -.col-sm-12, -.row.cols-sm-12 > * { - max-width: 100%; - flex-basis: 100%; } - -.col-sm-offset-11 { - margin-left: 91.6666666667%; } - -.col-sm-normal { - order: initial; } - -.col-sm-first { - order: -999; } - -.col-sm-last { - order: 999; } - -@media screen and (min-width: 500px) { - .col-md, - [class^='col-md-'], - [class^='col-md-offset-'], - .row[class*='cols-md-'] > * { - box-sizing: border-box; - flex: 0 0 auto; - padding: 0 calc(var(--universal-padding) / 2); } - - .col-md, - .row.cols-md > * { - max-width: 100%; - flex-grow: 1; - flex-basis: 0; } - - .col-md-1, - .row.cols-md-1 > * { - max-width: 8.3333333333%; - flex-basis: 8.3333333333%; } - - .col-md-offset-0 { - margin-left: 0; } - - .col-md-2, - .row.cols-md-2 > * { - max-width: 16.6666666667%; - flex-basis: 16.6666666667%; } - - .col-md-offset-1 { - margin-left: 8.3333333333%; } - - .col-md-3, - .row.cols-md-3 > * { - max-width: 25%; - flex-basis: 25%; } - - .col-md-offset-2 { - margin-left: 16.6666666667%; } - - .col-md-4, - .row.cols-md-4 > * { - max-width: 33.3333333333%; - flex-basis: 33.3333333333%; } - - .col-md-offset-3 { - margin-left: 25%; } - - .col-md-5, - .row.cols-md-5 > * { - max-width: 41.6666666667%; - flex-basis: 41.6666666667%; } - - .col-md-offset-4 { - margin-left: 33.3333333333%; } - - .col-md-6, - .row.cols-md-6 > * { - max-width: 50%; - flex-basis: 50%; } - - .col-md-offset-5 { - margin-left: 41.6666666667%; } - - .col-md-7, - .row.cols-md-7 > * { - max-width: 58.3333333333%; - flex-basis: 58.3333333333%; } - - .col-md-offset-6 { - margin-left: 50%; } - - .col-md-8, - .row.cols-md-8 > * { - max-width: 66.6666666667%; - flex-basis: 66.6666666667%; } - - .col-md-offset-7 { - margin-left: 58.3333333333%; } - - .col-md-9, - .row.cols-md-9 > * { - max-width: 75%; - flex-basis: 75%; } - - .col-md-offset-8 { - margin-left: 66.6666666667%; } - - .col-md-10, - .row.cols-md-10 > * { - max-width: 83.3333333333%; - flex-basis: 83.3333333333%; } - - .col-md-offset-9 { - margin-left: 75%; } - - .col-md-11, - .row.cols-md-11 > * { - max-width: 91.6666666667%; - flex-basis: 91.6666666667%; } - - .col-md-offset-10 { - margin-left: 83.3333333333%; } - - .col-md-12, - .row.cols-md-12 > * { - max-width: 100%; - flex-basis: 100%; } - - .col-md-offset-11 { - margin-left: 91.6666666667%; } - - .col-md-normal { - order: initial; } - - .col-md-first { - order: -999; } - - .col-md-last { - order: 999; } } -@media screen and (min-width: 1280px) { - .col-lg, - [class^='col-lg-'], - [class^='col-lg-offset-'], - .row[class*='cols-lg-'] > * { - box-sizing: border-box; - flex: 0 0 auto; - padding: 0 calc(var(--universal-padding) / 2); } - - .col-lg, - .row.cols-lg > * { - max-width: 100%; - flex-grow: 1; - flex-basis: 0; } - - .col-lg-1, - .row.cols-lg-1 > * { - max-width: 8.3333333333%; - flex-basis: 8.3333333333%; } - - .col-lg-offset-0 { - margin-left: 0; } - - .col-lg-2, - .row.cols-lg-2 > * { - max-width: 16.6666666667%; - flex-basis: 16.6666666667%; } - - .col-lg-offset-1 { - margin-left: 8.3333333333%; } - - .col-lg-3, - .row.cols-lg-3 > * { - max-width: 25%; - flex-basis: 25%; } - - .col-lg-offset-2 { - margin-left: 16.6666666667%; } - - .col-lg-4, - .row.cols-lg-4 > * { - max-width: 33.3333333333%; - flex-basis: 33.3333333333%; } - - .col-lg-offset-3 { - margin-left: 25%; } - - .col-lg-5, - .row.cols-lg-5 > * { - max-width: 41.6666666667%; - flex-basis: 41.6666666667%; } - - .col-lg-offset-4 { - margin-left: 33.3333333333%; } - - .col-lg-6, - .row.cols-lg-6 > * { - max-width: 50%; - flex-basis: 50%; } - - .col-lg-offset-5 { - margin-left: 41.6666666667%; } - - .col-lg-7, - .row.cols-lg-7 > * { - max-width: 58.3333333333%; - flex-basis: 58.3333333333%; } - - .col-lg-offset-6 { - margin-left: 50%; } - - .col-lg-8, - .row.cols-lg-8 > * { - max-width: 66.6666666667%; - flex-basis: 66.6666666667%; } - - .col-lg-offset-7 { - margin-left: 58.3333333333%; } - - .col-lg-9, - .row.cols-lg-9 > * { - max-width: 75%; - flex-basis: 75%; } - - .col-lg-offset-8 { - margin-left: 66.6666666667%; } - - .col-lg-10, - .row.cols-lg-10 > * { - max-width: 83.3333333333%; - flex-basis: 83.3333333333%; } - - .col-lg-offset-9 { - margin-left: 75%; } - - .col-lg-11, - .row.cols-lg-11 > * { - max-width: 91.6666666667%; - flex-basis: 91.6666666667%; } - - .col-lg-offset-10 { - margin-left: 83.3333333333%; } - - .col-lg-12, - .row.cols-lg-12 > * { - max-width: 100%; - flex-basis: 100%; } - - .col-lg-offset-11 { - margin-left: 91.6666666667%; } - - .col-lg-normal { - order: initial; } - - .col-lg-first { - order: -999; } - - .col-lg-last { - order: 999; } } -/* Card component CSS variable definitions */ -:root { - --card-back-color: #3cb4e6; - --card-fore-color: #03234b; - --card-border-color: #03234b; } - -.card { - display: flex; - flex-direction: column; - justify-content: space-between; - align-self: center; - position: relative; - width: 100%; - background: var(--card-back-color); - color: var(--card-fore-color); - border: 0.0714285714rem solid var(--card-border-color); - border-radius: var(--universal-border-radius); - margin: var(--universal-margin); - overflow: hidden; } - @media screen and (min-width: 320px) { - .card { - max-width: 320px; } } - .card > .sectione { - background: var(--card-back-color); - color: var(--card-fore-color); - box-sizing: border-box; - margin: 0; - border: 0; - border-radius: 0; - border-bottom: 0.0714285714rem solid var(--card-border-color); - padding: var(--universal-padding); - width: 100%; } - .card > .sectione.media { - height: 200px; - padding: 0; - -o-object-fit: cover; - object-fit: cover; } - .card > .sectione:last-child { - border-bottom: 0; } - -/* - Custom elements for card elements. -*/ -@media screen and (min-width: 240px) { - .card.small { - max-width: 240px; } } -@media screen and (min-width: 480px) { - .card.large { - max-width: 480px; } } -.card.fluid { - max-width: 100%; - width: auto; } - -.card.warning { - --card-back-color: #e5b8b7; - --card-fore-color: #3b234b; - --card-border-color: #8c0078; } - -.card.error { - --card-back-color: #464650; - --card-fore-color: #ffffff; - --card-border-color: #8c0078; } - -.card > .sectione.dark { - --card-back-color: #3b234b; - --card-fore-color: #ffffff; } - -.card > .sectione.double-padded { - padding: calc(1.5 * var(--universal-padding)); } - -/* - Definitions for forms and input elements. -*/ -/* Input_control module CSS variable definitions */ -:root { - --form-back-color: #ffe97f; - --form-fore-color: #03234b; - --form-border-color: #3cb4e6; - --input-back-color: #ffffff; - --input-fore-color: #03234b; - --input-border-color: #3cb4e6; - --input-focus-color: #0288d1; - --input-invalid-color: #d32f2f; - --button-back-color: #e2e2e2; - --button-hover-back-color: #dcdcdc; - --button-fore-color: #212121; - --button-border-color: transparent; - --button-hover-border-color: transparent; - --button-group-border-color: rgba(124, 124, 124, 0.54); } - -form { - background: var(--form-back-color); - color: var(--form-fore-color); - border: 0.0714285714rem solid var(--form-border-color); - border-radius: var(--universal-border-radius); - margin: var(--universal-margin); - padding: calc(2 * var(--universal-padding)) var(--universal-padding); } - -fieldset { - border: 0.0714285714rem solid var(--form-border-color); - border-radius: var(--universal-border-radius); - margin: calc(var(--universal-margin) / 4); - padding: var(--universal-padding); } - -legend { - box-sizing: border-box; - display: table; - max-width: 100%; - white-space: normal; - font-weight: 500; - padding: calc(var(--universal-padding) / 2); } - -label { - padding: calc(var(--universal-padding) / 2) var(--universal-padding); } - -.input-group { - display: inline-block; } - .input-group.fluid { - display: flex; - align-items: center; - justify-content: center; } - .input-group.fluid > input { - max-width: 100%; - flex-grow: 1; - flex-basis: 0px; } - @media screen and (max-width: 499px) { - .input-group.fluid { - align-items: stretch; - flex-direction: column; } } - .input-group.vertical { - display: flex; - align-items: stretch; - flex-direction: column; } - .input-group.vertical > input { - max-width: 100%; - flex-grow: 1; - flex-basis: 0px; } - -[type="number"]::-webkit-inner-spin-button, [type="number"]::-webkit-outer-spin-button { - height: auto; } - -[type="search"] { - -webkit-appearance: textfield; - outline-offset: -2px; } - -[type="search"]::-webkit-search-cancel-button, -[type="search"]::-webkit-search-decoration { - -webkit-appearance: none; } - -input:not([type]), [type="text"], [type="email"], [type="number"], [type="search"], -[type="password"], [type="url"], [type="tel"], [type="checkbox"], [type="radio"], textarea, select { - box-sizing: border-box; - background: var(--input-back-color); - color: var(--input-fore-color); - border: 0.0714285714rem solid var(--input-border-color); - border-radius: var(--universal-border-radius); - margin: calc(var(--universal-margin) / 2); - padding: var(--universal-padding) calc(1.5 * var(--universal-padding)); } - -input:not([type="button"]):not([type="submit"]):not([type="reset"]):hover, input:not([type="button"]):not([type="submit"]):not([type="reset"]):focus, textarea:hover, textarea:focus, select:hover, select:focus { - border-color: var(--input-focus-color); - box-shadow: none; } -input:not([type="button"]):not([type="submit"]):not([type="reset"]):invalid, input:not([type="button"]):not([type="submit"]):not([type="reset"]):focus:invalid, textarea:invalid, textarea:focus:invalid, select:invalid, select:focus:invalid { - border-color: var(--input-invalid-color); - box-shadow: none; } -input:not([type="button"]):not([type="submit"]):not([type="reset"])[readonly], textarea[readonly], select[readonly] { - background: var(--secondary-back-color); } - -select { - max-width: 100%; } - -option { - overflow: hidden; - text-overflow: ellipsis; } - -[type="checkbox"], [type="radio"] { - -webkit-appearance: none; - -moz-appearance: none; - appearance: none; - position: relative; - height: calc(1rem + var(--universal-padding) / 2); - width: calc(1rem + var(--universal-padding) / 2); - vertical-align: text-bottom; - padding: 0; - flex-basis: calc(1rem + var(--universal-padding) / 2) !important; - flex-grow: 0 !important; } - [type="checkbox"]:checked:before, [type="radio"]:checked:before { - position: absolute; } - -[type="checkbox"]:checked:before { - content: '\2713'; - font-family: sans-serif; - font-size: calc(1rem + var(--universal-padding) / 2); - top: calc(0rem - var(--universal-padding)); - left: calc(var(--universal-padding) / 4); } - -[type="radio"] { - border-radius: 100%; } - [type="radio"]:checked:before { - border-radius: 100%; - content: ''; - top: calc(0.0714285714rem + var(--universal-padding) / 2); - left: calc(0.0714285714rem + var(--universal-padding) / 2); - background: var(--input-fore-color); - width: 0.5rem; - height: 0.5rem; } - -:placeholder-shown { - color: var(--input-fore-color); } - -::-ms-placeholder { - color: var(--input-fore-color); - opacity: 0.54; } - -button::-moz-focus-inner, [type="button"]::-moz-focus-inner, [type="reset"]::-moz-focus-inner, [type="submit"]::-moz-focus-inner { - border-style: none; - padding: 0; } - -button, html [type="button"], [type="reset"], [type="submit"] { - -webkit-appearance: button; } - -button { - overflow: visible; - text-transform: none; } - -button, [type="button"], [type="submit"], [type="reset"], -a.button, label.button, .button, -a[role="button"], label[role="button"], [role="button"] { - display: inline-block; - background: var(--button-back-color); - color: var(--button-fore-color); - border: 0.0714285714rem solid var(--button-border-color); - border-radius: var(--universal-border-radius); - padding: var(--universal-padding) calc(1.5 * var(--universal-padding)); - margin: var(--universal-margin); - text-decoration: none; - cursor: pointer; - transition: background 0.3s; } - button:hover, button:focus, [type="button"]:hover, [type="button"]:focus, [type="submit"]:hover, [type="submit"]:focus, [type="reset"]:hover, [type="reset"]:focus, - a.button:hover, - a.button:focus, label.button:hover, label.button:focus, .button:hover, .button:focus, - a[role="button"]:hover, - a[role="button"]:focus, label[role="button"]:hover, label[role="button"]:focus, [role="button"]:hover, [role="button"]:focus { - background: var(--button-hover-back-color); - border-color: var(--button-hover-border-color); } - -input:disabled, input[disabled], textarea:disabled, textarea[disabled], select:disabled, select[disabled], button:disabled, button[disabled], .button:disabled, .button[disabled], [role="button"]:disabled, [role="button"][disabled] { - cursor: not-allowed; - opacity: 0.75; } - -.button-group { - display: flex; - border: 0.0714285714rem solid var(--button-group-border-color); - border-radius: var(--universal-border-radius); - margin: var(--universal-margin); } - .button-group > button, .button-group [type="button"], .button-group > [type="submit"], .button-group > [type="reset"], .button-group > .button, .button-group > [role="button"] { - margin: 0; - max-width: 100%; - flex: 1 1 auto; - text-align: center; - border: 0; - border-radius: 0; - box-shadow: none; } - .button-group > :not(:first-child) { - border-left: 0.0714285714rem solid var(--button-group-border-color); } - @media screen and (max-width: 499px) { - .button-group { - flex-direction: column; } - .button-group > :not(:first-child) { - border: 0; - border-top: 0.0714285714rem solid var(--button-group-border-color); } } - -/* - Custom elements for forms and input elements. -*/ -button.primary, [type="button"].primary, [type="submit"].primary, [type="reset"].primary, .button.primary, [role="button"].primary { - --button-back-color: #1976d2; - --button-fore-color: #f8f8f8; } - button.primary:hover, button.primary:focus, [type="button"].primary:hover, [type="button"].primary:focus, [type="submit"].primary:hover, [type="submit"].primary:focus, [type="reset"].primary:hover, [type="reset"].primary:focus, .button.primary:hover, .button.primary:focus, [role="button"].primary:hover, [role="button"].primary:focus { - --button-hover-back-color: #1565c0; } - -button.secondary, [type="button"].secondary, [type="submit"].secondary, [type="reset"].secondary, .button.secondary, [role="button"].secondary { - --button-back-color: #d32f2f; - --button-fore-color: #f8f8f8; } - button.secondary:hover, button.secondary:focus, [type="button"].secondary:hover, [type="button"].secondary:focus, [type="submit"].secondary:hover, [type="submit"].secondary:focus, [type="reset"].secondary:hover, [type="reset"].secondary:focus, .button.secondary:hover, .button.secondary:focus, [role="button"].secondary:hover, [role="button"].secondary:focus { - --button-hover-back-color: #c62828; } - -button.tertiary, [type="button"].tertiary, [type="submit"].tertiary, [type="reset"].tertiary, .button.tertiary, [role="button"].tertiary { - --button-back-color: #308732; - --button-fore-color: #f8f8f8; } - button.tertiary:hover, button.tertiary:focus, [type="button"].tertiary:hover, [type="button"].tertiary:focus, [type="submit"].tertiary:hover, [type="submit"].tertiary:focus, [type="reset"].tertiary:hover, [type="reset"].tertiary:focus, .button.tertiary:hover, .button.tertiary:focus, [role="button"].tertiary:hover, [role="button"].tertiary:focus { - --button-hover-back-color: #277529; } - -button.inverse, [type="button"].inverse, [type="submit"].inverse, [type="reset"].inverse, .button.inverse, [role="button"].inverse { - --button-back-color: #212121; - --button-fore-color: #f8f8f8; } - button.inverse:hover, button.inverse:focus, [type="button"].inverse:hover, [type="button"].inverse:focus, [type="submit"].inverse:hover, [type="submit"].inverse:focus, [type="reset"].inverse:hover, [type="reset"].inverse:focus, .button.inverse:hover, .button.inverse:focus, [role="button"].inverse:hover, [role="button"].inverse:focus { - --button-hover-back-color: #111; } - -button.small, [type="button"].small, [type="submit"].small, [type="reset"].small, .button.small, [role="button"].small { - padding: calc(0.5 * var(--universal-padding)) calc(0.75 * var(--universal-padding)); - margin: var(--universal-margin); } - -button.large, [type="button"].large, [type="submit"].large, [type="reset"].large, .button.large, [role="button"].large { - padding: calc(1.5 * var(--universal-padding)) calc(2 * var(--universal-padding)); - margin: var(--universal-margin); } - -/* - Definitions for navigation elements. -*/ -/* Navigation module CSS variable definitions */ -:root { - --header-back-color: #03234b; - --header-hover-back-color: #ffd200; - --header-fore-color: #ffffff; - --header-border-color: #3cb4e6; - --nav-back-color: #ffffff; - --nav-hover-back-color: #ffe97f; - --nav-fore-color: #e6007e; - --nav-border-color: #3cb4e6; - --nav-link-color: #3cb4e6; - --footer-fore-color: #ffffff; - --footer-back-color: #03234b; - --footer-border-color: #3cb4e6; - --footer-link-color: #3cb4e6; - --drawer-back-color: #ffffff; - --drawer-hover-back-color: #ffe97f; - --drawer-border-color: #3cb4e6; - --drawer-close-color: #e6007e; } - -header { - height: 2.75rem; - background: var(--header-back-color); - color: var(--header-fore-color); - border-bottom: 0.0714285714rem solid var(--header-border-color); - padding: calc(var(--universal-padding) / 4) 0; - white-space: nowrap; - overflow-x: auto; - overflow-y: hidden; } - header.row { - box-sizing: content-box; } - header .logo { - color: var(--header-fore-color); - font-size: 1.75rem; - padding: var(--universal-padding) calc(2 * var(--universal-padding)); - text-decoration: none; } - header button, header [type="button"], header .button, header [role="button"] { - box-sizing: border-box; - position: relative; - top: calc(0rem - var(--universal-padding) / 4); - height: calc(3.1875rem + var(--universal-padding) / 2); - background: var(--header-back-color); - line-height: calc(3.1875rem - var(--universal-padding) * 1.5); - text-align: center; - color: var(--header-fore-color); - border: 0; - border-radius: 0; - margin: 0; - text-transform: uppercase; } - header button:hover, header button:focus, header [type="button"]:hover, header [type="button"]:focus, header .button:hover, header .button:focus, header [role="button"]:hover, header [role="button"]:focus { - background: var(--header-hover-back-color); } - -nav { - background: var(--nav-back-color); - color: var(--nav-fore-color); - border: 0.0714285714rem solid var(--nav-border-color); - border-radius: var(--universal-border-radius); - margin: var(--universal-margin); } - nav * { - padding: var(--universal-padding) calc(1.5 * var(--universal-padding)); } - nav a, nav a:visited { - display: block; - color: var(--nav-link-color); - border-radius: var(--universal-border-radius); - transition: background 0.3s; } - nav a:hover, nav a:focus, nav a:visited:hover, nav a:visited:focus { - text-decoration: none; - background: var(--nav-hover-back-color); } - nav .sublink-1 { - position: relative; - margin-left: calc(2 * var(--universal-padding)); } - nav .sublink-1:before { - position: absolute; - left: calc(var(--universal-padding) - 1 * var(--universal-padding)); - top: -0.0714285714rem; - content: ''; - height: 100%; - border: 0.0714285714rem solid var(--nav-border-color); - border-left: 0; } - nav .sublink-2 { - position: relative; - margin-left: calc(4 * var(--universal-padding)); } - nav .sublink-2:before { - position: absolute; - left: calc(var(--universal-padding) - 3 * var(--universal-padding)); - top: -0.0714285714rem; - content: ''; - height: 100%; - border: 0.0714285714rem solid var(--nav-border-color); - border-left: 0; } - -footer { - background: var(--footer-back-color); - color: var(--footer-fore-color); - border-top: 0.0714285714rem solid var(--footer-border-color); - padding: calc(2 * var(--universal-padding)) var(--universal-padding); - font-size: 0.875rem; } - footer a, footer a:visited { - color: var(--footer-link-color); } - -header.sticky { - position: -webkit-sticky; - position: sticky; - z-index: 1101; - top: 0; } - -footer.sticky { - position: -webkit-sticky; - position: sticky; - z-index: 1101; - bottom: 0; } - -.drawer-toggle:before { - display: inline-block; - position: relative; - vertical-align: bottom; - content: '\00a0\2261\00a0'; - font-family: sans-serif; - font-size: 1.5em; } -@media screen and (min-width: 500px) { - .drawer-toggle:not(.persistent) { - display: none; } } - -[type="checkbox"].drawer { - height: 1px; - width: 1px; - margin: -1px; - overflow: hidden; - position: absolute; - clip: rect(0 0 0 0); - -webkit-clip-path: inset(100%); - clip-path: inset(100%); } - [type="checkbox"].drawer + * { - display: block; - box-sizing: border-box; - position: fixed; - top: 0; - width: 320px; - height: 100vh; - overflow-y: auto; - background: var(--drawer-back-color); - border: 0.0714285714rem solid var(--drawer-border-color); - border-radius: 0; - margin: 0; - z-index: 1110; - right: -320px; - transition: right 0.3s; } - [type="checkbox"].drawer + * .drawer-close { - position: absolute; - top: var(--universal-margin); - right: var(--universal-margin); - z-index: 1111; - width: 2rem; - height: 2rem; - border-radius: var(--universal-border-radius); - padding: var(--universal-padding); - margin: 0; - cursor: pointer; - transition: background 0.3s; } - [type="checkbox"].drawer + * .drawer-close:before { - display: block; - content: '\00D7'; - color: var(--drawer-close-color); - position: relative; - font-family: sans-serif; - font-size: 2rem; - line-height: 1; - text-align: center; } - [type="checkbox"].drawer + * .drawer-close:hover, [type="checkbox"].drawer + * .drawer-close:focus { - background: var(--drawer-hover-back-color); } - @media screen and (max-width: 320px) { - [type="checkbox"].drawer + * { - width: 100%; } } - [type="checkbox"].drawer:checked + * { - right: 0; } - @media screen and (min-width: 500px) { - [type="checkbox"].drawer:not(.persistent) + * { - position: static; - height: 100%; - z-index: 1100; } - [type="checkbox"].drawer:not(.persistent) + * .drawer-close { - display: none; } } - -/* - Definitions for the responsive table component. -*/ -/* Table module CSS variable definitions. */ -:root { - --table-border-color: #03234b; - --table-border-separator-color: #03234b; - --table-head-back-color: #03234b; - --table-head-fore-color: #ffffff; - --table-body-back-color: #ffffff; - --table-body-fore-color: #03234b; - --table-body-alt-back-color: #f4f4f4; } - -table { - border-collapse: separate; - border-spacing: 0; - margin: 0; - display: flex; - flex: 0 1 auto; - flex-flow: row wrap; - padding: var(--universal-padding); - padding-top: 0; } - table caption { - font-size: 1rem; - margin: calc(2 * var(--universal-margin)) 0; - max-width: 100%; - flex: 0 0 100%; } - table thead, table tbody { - display: flex; - flex-flow: row wrap; - border: 0.0714285714rem solid var(--table-border-color); } - table thead { - z-index: 999; - border-radius: var(--universal-border-radius) var(--universal-border-radius) 0 0; - border-bottom: 0.0714285714rem solid var(--table-border-separator-color); } - table tbody { - border-top: 0; - margin-top: calc(0 - var(--universal-margin)); - border-radius: 0 0 var(--universal-border-radius) var(--universal-border-radius); } - table tr { - display: flex; - padding: 0; } - table th, table td { - padding: calc(0.5 * var(--universal-padding)); - font-size: 0.9rem; } - table th { - text-align: left; - background: var(--table-head-back-color); - color: var(--table-head-fore-color); } - table td { - background: var(--table-body-back-color); - color: var(--table-body-fore-color); - border-top: 0.0714285714rem solid var(--table-border-color); } - -table:not(.horizontal) { - overflow: auto; - max-height: 100%; } - table:not(.horizontal) thead, table:not(.horizontal) tbody { - max-width: 100%; - flex: 0 0 100%; } - table:not(.horizontal) tr { - flex-flow: row wrap; - flex: 0 0 100%; } - table:not(.horizontal) th, table:not(.horizontal) td { - flex: 1 0 0%; - overflow: hidden; - text-overflow: ellipsis; } - table:not(.horizontal) thead { - position: sticky; - top: 0; } - table:not(.horizontal) tbody tr:first-child td { - border-top: 0; } - -table.horizontal { - border: 0; } - table.horizontal thead, table.horizontal tbody { - border: 0; - flex: .2 0 0; - flex-flow: row nowrap; } - table.horizontal tbody { - overflow: auto; - justify-content: space-between; - flex: .8 0 0; - margin-left: 0; - padding-bottom: calc(var(--universal-padding) / 4); } - table.horizontal tr { - flex-direction: column; - flex: 1 0 auto; } - table.horizontal th, table.horizontal td { - width: auto; - border: 0; - border-bottom: 0.0714285714rem solid var(--table-border-color); } - table.horizontal th:not(:first-child), table.horizontal td:not(:first-child) { - border-top: 0; } - table.horizontal th { - text-align: right; - border-left: 0.0714285714rem solid var(--table-border-color); - border-right: 0.0714285714rem solid var(--table-border-separator-color); } - table.horizontal thead tr:first-child { - padding-left: 0; } - table.horizontal th:first-child, table.horizontal td:first-child { - border-top: 0.0714285714rem solid var(--table-border-color); } - table.horizontal tbody tr:last-child td { - border-right: 0.0714285714rem solid var(--table-border-color); } - table.horizontal tbody tr:last-child td:first-child { - border-top-right-radius: 0.25rem; } - table.horizontal tbody tr:last-child td:last-child { - border-bottom-right-radius: 0.25rem; } - table.horizontal thead tr:first-child th:first-child { - border-top-left-radius: 0.25rem; } - table.horizontal thead tr:first-child th:last-child { - border-bottom-left-radius: 0.25rem; } - -@media screen and (max-width: 499px) { - table, table.horizontal { - border-collapse: collapse; - border: 0; - width: 100%; - display: table; } - table thead, table th, table.horizontal thead, table.horizontal th { - border: 0; - height: 1px; - width: 1px; - margin: -1px; - overflow: hidden; - padding: 0; - position: absolute; - clip: rect(0 0 0 0); - -webkit-clip-path: inset(100%); - clip-path: inset(100%); } - table tbody, table.horizontal tbody { - border: 0; - display: table-row-group; } - table tr, table.horizontal tr { - display: block; - border: 0.0714285714rem solid var(--table-border-color); - border-radius: var(--universal-border-radius); - background: #ffffff; - padding: var(--universal-padding); - margin: var(--universal-margin); - margin-bottom: calc(1 * var(--universal-margin)); } - table th, table td, table.horizontal th, table.horizontal td { - width: auto; } - table td, table.horizontal td { - display: block; - border: 0; - text-align: right; } - table td:before, table.horizontal td:before { - content: attr(data-label); - float: left; - font-weight: 600; } - table th:first-child, table td:first-child, table.horizontal th:first-child, table.horizontal td:first-child { - border-top: 0; } - table tbody tr:last-child td, table.horizontal tbody tr:last-child td { - border-right: 0; } } -table tr:nth-of-type(2n) > td { - background: var(--table-body-alt-back-color); } - -@media screen and (max-width: 500px) { - table tr:nth-of-type(2n) { - background: var(--table-body-alt-back-color); } } -:root { - --table-body-hover-back-color: #90caf9; } - -table.hoverable tr:hover, table.hoverable tr:hover > td, table.hoverable tr:focus, table.hoverable tr:focus > td { - background: var(--table-body-hover-back-color); } - -@media screen and (max-width: 500px) { - table.hoverable tr:hover, table.hoverable tr:hover > td, table.hoverable tr:focus, table.hoverable tr:focus > td { - background: var(--table-body-hover-back-color); } } -/* - Definitions for contextual background elements, toasts and tooltips. -*/ -/* Contextual module CSS variable definitions */ -:root { - --mark-back-color: #3cb4e6; - --mark-fore-color: #ffffff; } - -mark { - background: var(--mark-back-color); - color: var(--mark-fore-color); - font-size: 0.95em; - line-height: 1em; - border-radius: var(--universal-border-radius); - padding: calc(var(--universal-padding) / 4) var(--universal-padding); } - mark.inline-block { - display: inline-block; - font-size: 1em; - line-height: 1.4; - padding: calc(var(--universal-padding) / 2) var(--universal-padding); } - -:root { - --toast-back-color: #424242; - --toast-fore-color: #fafafa; } - -.toast { - position: fixed; - bottom: calc(var(--universal-margin) * 3); - left: 50%; - transform: translate(-50%, -50%); - z-index: 1111; - color: var(--toast-fore-color); - background: var(--toast-back-color); - border-radius: calc(var(--universal-border-radius) * 16); - padding: var(--universal-padding) calc(var(--universal-padding) * 3); } - -:root { - --tooltip-back-color: #212121; - --tooltip-fore-color: #fafafa; } - -.tooltip { - position: relative; - display: inline-block; } - .tooltip:before, .tooltip:after { - position: absolute; - opacity: 0; - clip: rect(0 0 0 0); - -webkit-clip-path: inset(100%); - clip-path: inset(100%); - transition: all 0.3s; - z-index: 1010; - left: 50%; } - .tooltip:not(.bottom):before, .tooltip:not(.bottom):after { - bottom: 75%; } - .tooltip.bottom:before, .tooltip.bottom:after { - top: 75%; } - .tooltip:hover:before, .tooltip:hover:after, .tooltip:focus:before, .tooltip:focus:after { - opacity: 1; - clip: auto; - -webkit-clip-path: inset(0%); - clip-path: inset(0%); } - .tooltip:before { - content: ''; - background: transparent; - border: var(--universal-margin) solid transparent; - left: calc(50% - var(--universal-margin)); } - .tooltip:not(.bottom):before { - border-top-color: #212121; } - .tooltip.bottom:before { - border-bottom-color: #212121; } - .tooltip:after { - content: attr(aria-label); - color: var(--tooltip-fore-color); - background: var(--tooltip-back-color); - border-radius: var(--universal-border-radius); - padding: var(--universal-padding); - white-space: nowrap; - transform: translateX(-50%); } - .tooltip:not(.bottom):after { - margin-bottom: calc(2 * var(--universal-margin)); } - .tooltip.bottom:after { - margin-top: calc(2 * var(--universal-margin)); } - -:root { - --modal-overlay-color: rgba(0, 0, 0, 0.45); - --modal-close-color: #e6007e; - --modal-close-hover-color: #ffe97f; } - -[type="checkbox"].modal { - height: 1px; - width: 1px; - margin: -1px; - overflow: hidden; - position: absolute; - clip: rect(0 0 0 0); - -webkit-clip-path: inset(100%); - clip-path: inset(100%); } - [type="checkbox"].modal + div { - position: fixed; - top: 0; - left: 0; - display: none; - width: 100vw; - height: 100vh; - background: var(--modal-overlay-color); } - [type="checkbox"].modal + div .card { - margin: 0 auto; - max-height: 50vh; - overflow: auto; } - [type="checkbox"].modal + div .card .modal-close { - position: absolute; - top: 0; - right: 0; - width: 1.75rem; - height: 1.75rem; - border-radius: var(--universal-border-radius); - padding: var(--universal-padding); - margin: 0; - cursor: pointer; - transition: background 0.3s; } - [type="checkbox"].modal + div .card .modal-close:before { - display: block; - content: '\00D7'; - color: var(--modal-close-color); - position: relative; - font-family: sans-serif; - font-size: 1.75rem; - line-height: 1; - text-align: center; } - [type="checkbox"].modal + div .card .modal-close:hover, [type="checkbox"].modal + div .card .modal-close:focus { - background: var(--modal-close-hover-color); } - [type="checkbox"].modal:checked + div { - display: flex; - flex: 0 1 auto; - z-index: 1200; } - [type="checkbox"].modal:checked + div .card .modal-close { - z-index: 1211; } - -:root { - --collapse-label-back-color: #03234b; - --collapse-label-fore-color: #ffffff; - --collapse-label-hover-back-color: #3cb4e6; - --collapse-selected-label-back-color: #3cb4e6; - --collapse-border-color: var(--collapse-label-back-color); - --collapse-selected-border-color: #ceecf8; - --collapse-content-back-color: #ffffff; - --collapse-selected-label-border-color: #3cb4e6; } - -.collapse { - width: calc(100% - 2 * var(--universal-margin)); - opacity: 1; - display: flex; - flex-direction: column; - margin: var(--universal-margin); - border-radius: var(--universal-border-radius); } - .collapse > [type="radio"], .collapse > [type="checkbox"] { - height: 1px; - width: 1px; - margin: -1px; - overflow: hidden; - position: absolute; - clip: rect(0 0 0 0); - -webkit-clip-path: inset(100%); - clip-path: inset(100%); } - .collapse > label { - flex-grow: 1; - display: inline-block; - height: 1.25rem; - cursor: pointer; - transition: background 0.2s; - color: var(--collapse-label-fore-color); - background: var(--collapse-label-back-color); - border: 0.0714285714rem solid var(--collapse-selected-border-color); - padding: calc(1.25 * var(--universal-padding)); } - .collapse > label:hover, .collapse > label:focus { - background: var(--collapse-label-hover-back-color); } - .collapse > label + div { - flex-basis: auto; - height: 1px; - width: 1px; - margin: -1px; - overflow: hidden; - position: absolute; - clip: rect(0 0 0 0); - -webkit-clip-path: inset(100%); - clip-path: inset(100%); - transition: max-height 0.3s; - max-height: 1px; } - .collapse > :checked + label { - background: var(--collapse-selected-label-back-color); - border-color: var(--collapse-selected-label-border-color); } - .collapse > :checked + label + div { - box-sizing: border-box; - position: relative; - width: 100%; - height: auto; - overflow: auto; - margin: 0; - background: var(--collapse-content-back-color); - border: 0.0714285714rem solid var(--collapse-selected-border-color); - border-top: 0; - padding: var(--universal-padding); - clip: auto; - -webkit-clip-path: inset(0%); - clip-path: inset(0%); - max-height: 100%; } - .collapse > label:not(:first-of-type) { - border-top: 0; } - .collapse > label:first-of-type { - border-radius: var(--universal-border-radius) var(--universal-border-radius) 0 0; } - .collapse > label:last-of-type:not(:first-of-type) { - border-radius: 0 0 var(--universal-border-radius) var(--universal-border-radius); } - .collapse > label:last-of-type:first-of-type { - border-radius: var(--universal-border-radius); } - .collapse > :checked:last-of-type:not(:first-of-type) + label { - border-radius: 0; } - .collapse > :checked:last-of-type + label + div { - border-radius: 0 0 var(--universal-border-radius) var(--universal-border-radius); } - -/* - Custom elements for contextual background elements, toasts and tooltips. -*/ -mark.tertiary { - --mark-back-color: #3cb4e6; } - -mark.tag { - padding: calc(var(--universal-padding)/2) var(--universal-padding); - border-radius: 1em; } - -/* - Definitions for progress elements and spinners. -*/ -/* Progress module CSS variable definitions */ -:root { - --progress-back-color: #3cb4e6; - --progress-fore-color: #555; } - -progress { - display: block; - vertical-align: baseline; - -webkit-appearance: none; - -moz-appearance: none; - appearance: none; - height: 0.75rem; - width: calc(100% - 2 * var(--universal-margin)); - margin: var(--universal-margin); - border: 0; - border-radius: calc(2 * var(--universal-border-radius)); - background: var(--progress-back-color); - color: var(--progress-fore-color); } - progress::-webkit-progress-value { - background: var(--progress-fore-color); - border-top-left-radius: calc(2 * var(--universal-border-radius)); - border-bottom-left-radius: calc(2 * var(--universal-border-radius)); } - progress::-webkit-progress-bar { - background: var(--progress-back-color); } - progress::-moz-progress-bar { - background: var(--progress-fore-color); - border-top-left-radius: calc(2 * var(--universal-border-radius)); - border-bottom-left-radius: calc(2 * var(--universal-border-radius)); } - progress[value="1000"]::-webkit-progress-value { - border-radius: calc(2 * var(--universal-border-radius)); } - progress[value="1000"]::-moz-progress-bar { - border-radius: calc(2 * var(--universal-border-radius)); } - progress.inline { - display: inline-block; - vertical-align: middle; - width: 60%; } - -:root { - --spinner-back-color: #ddd; - --spinner-fore-color: #555; } - -@keyframes spinner-donut-anim { - 0% { - transform: rotate(0deg); } - 100% { - transform: rotate(360deg); } } -.spinner { - display: inline-block; - margin: var(--universal-margin); - border: 0.25rem solid var(--spinner-back-color); - border-left: 0.25rem solid var(--spinner-fore-color); - border-radius: 50%; - width: 1.25rem; - height: 1.25rem; - animation: spinner-donut-anim 1.2s linear infinite; } - -/* - Custom elements for progress bars and spinners. -*/ -progress.primary { - --progress-fore-color: #1976d2; } - -progress.secondary { - --progress-fore-color: #d32f2f; } - -progress.tertiary { - --progress-fore-color: #308732; } - -.spinner.primary { - --spinner-fore-color: #1976d2; } - -.spinner.secondary { - --spinner-fore-color: #d32f2f; } - -.spinner.tertiary { - --spinner-fore-color: #308732; } - -/* - Definitions for icons - powered by Feather (https://feathericons.com/). -*/ -span[class^='icon-'] { - display: inline-block; - height: 1em; - width: 1em; - vertical-align: -0.125em; - background-size: contain; - margin: 0 calc(var(--universal-margin) / 4); } - span[class^='icon-'].secondary { - -webkit-filter: invert(25%); - filter: invert(25%); } - span[class^='icon-'].inverse { - -webkit-filter: invert(100%); - filter: invert(100%); } - -span.icon-alert { - background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='12' cy='12' r='10'%3E%3C/circle%3E%3Cline x1='12' y1='8' x2='12' y2='12'%3E%3C/line%3E%3Cline x1='12' y1='16' x2='12' y2='16'%3E%3C/line%3E%3C/svg%3E"); } -span.icon-bookmark { - background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M19 21l-7-5-7 5V5a2 2 0 0 1 2-2h10a2 2 0 0 1 2 2z'%3E%3C/path%3E%3C/svg%3E"); } -span.icon-calendar { - background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Crect x='3' y='4' width='18' height='18' rx='2' ry='2'%3E%3C/rect%3E%3Cline x1='16' y1='2' x2='16' y2='6'%3E%3C/line%3E%3Cline x1='8' y1='2' x2='8' y2='6'%3E%3C/line%3E%3Cline x1='3' y1='10' x2='21' y2='10'%3E%3C/line%3E%3C/svg%3E"); } -span.icon-credit { - background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Crect x='1' y='4' width='22' height='16' rx='2' ry='2'%3E%3C/rect%3E%3Cline x1='1' y1='10' x2='23' y2='10'%3E%3C/line%3E%3C/svg%3E"); } -span.icon-edit { - background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M20 14.66V20a2 2 0 0 1-2 2H4a2 2 0 0 1-2-2V6a2 2 0 0 1 2-2h5.34'%3E%3C/path%3E%3Cpolygon points='18 2 22 6 12 16 8 16 8 12 18 2'%3E%3C/polygon%3E%3C/svg%3E"); } -span.icon-link { - background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M18 13v6a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2V8a2 2 0 0 1 2-2h6'%3E%3C/path%3E%3Cpolyline points='15 3 21 3 21 9'%3E%3C/polyline%3E%3Cline x1='10' y1='14' x2='21' y2='3'%3E%3C/line%3E%3C/svg%3E"); } -span.icon-help { - background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M9.09 9a3 3 0 0 1 5.83 1c0 2-3 3-3 3'%3E%3C/path%3E%3Ccircle cx='12' cy='12' r='10'%3E%3C/circle%3E%3Cline x1='12' y1='17' x2='12' y2='17'%3E%3C/line%3E%3C/svg%3E"); } -span.icon-home { - background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M3 9l9-7 9 7v11a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2z'%3E%3C/path%3E%3Cpolyline points='9 22 9 12 15 12 15 22'%3E%3C/polyline%3E%3C/svg%3E"); } -span.icon-info { - background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='12' cy='12' r='10'%3E%3C/circle%3E%3Cline x1='12' y1='16' x2='12' y2='12'%3E%3C/line%3E%3Cline x1='12' y1='8' x2='12' y2='8'%3E%3C/line%3E%3C/svg%3E"); } -span.icon-lock { - background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Crect x='3' y='11' width='18' height='11' rx='2' ry='2'%3E%3C/rect%3E%3Cpath d='M7 11V7a5 5 0 0 1 10 0v4'%3E%3C/path%3E%3C/svg%3E"); } -span.icon-mail { - background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M4 4h16c1.1 0 2 .9 2 2v12c0 1.1-.9 2-2 2H4c-1.1 0-2-.9-2-2V6c0-1.1.9-2 2-2z'%3E%3C/path%3E%3Cpolyline points='22,6 12,13 2,6'%3E%3C/polyline%3E%3C/svg%3E"); } -span.icon-location { - background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M21 10c0 7-9 13-9 13s-9-6-9-13a9 9 0 0 1 18 0z'%3E%3C/path%3E%3Ccircle cx='12' cy='10' r='3'%3E%3C/circle%3E%3C/svg%3E"); } -span.icon-phone { - background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M22 16.92v3a2 2 0 0 1-2.18 2 19.79 19.79 0 0 1-8.63-3.07 19.5 19.5 0 0 1-6-6 19.79 19.79 0 0 1-3.07-8.67A2 2 0 0 1 4.11 2h3a2 2 0 0 1 2 1.72 12.84 12.84 0 0 0 .7 2.81 2 2 0 0 1-.45 2.11L8.09 9.91a16 16 0 0 0 6 6l1.27-1.27a2 2 0 0 1 2.11-.45 12.84 12.84 0 0 0 2.81.7A2 2 0 0 1 22 16.92z'%3E%3C/path%3E%3C/svg%3E"); } -span.icon-rss { - background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M4 11a9 9 0 0 1 9 9'%3E%3C/path%3E%3Cpath d='M4 4a16 16 0 0 1 16 16'%3E%3C/path%3E%3Ccircle cx='5' cy='19' r='1'%3E%3C/circle%3E%3C/svg%3E"); } -span.icon-search { - background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='11' cy='11' r='8'%3E%3C/circle%3E%3Cline x1='21' y1='21' x2='16.65' y2='16.65'%3E%3C/line%3E%3C/svg%3E"); } -span.icon-settings { - background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='12' cy='12' r='3'%3E%3C/circle%3E%3Cpath d='M19.4 15a1.65 1.65 0 0 0 .33 1.82l.06.06a2 2 0 0 1 0 2.83 2 2 0 0 1-2.83 0l-.06-.06a1.65 1.65 0 0 0-1.82-.33 1.65 1.65 0 0 0-1 1.51V21a2 2 0 0 1-2 2 2 2 0 0 1-2-2v-.09A1.65 1.65 0 0 0 9 19.4a1.65 1.65 0 0 0-1.82.33l-.06.06a2 2 0 0 1-2.83 0 2 2 0 0 1 0-2.83l.06-.06a1.65 1.65 0 0 0 .33-1.82 1.65 1.65 0 0 0-1.51-1H3a2 2 0 0 1-2-2 2 2 0 0 1 2-2h.09A1.65 1.65 0 0 0 4.6 9a1.65 1.65 0 0 0-.33-1.82l-.06-.06a2 2 0 0 1 0-2.83 2 2 0 0 1 2.83 0l.06.06a1.65 1.65 0 0 0 1.82.33H9a1.65 1.65 0 0 0 1-1.51V3a2 2 0 0 1 2-2 2 2 0 0 1 2 2v.09a1.65 1.65 0 0 0 1 1.51 1.65 1.65 0 0 0 1.82-.33l.06-.06a2 2 0 0 1 2.83 0 2 2 0 0 1 0 2.83l-.06.06a1.65 1.65 0 0 0-.33 1.82V9a1.65 1.65 0 0 0 1.51 1H21a2 2 0 0 1 2 2 2 2 0 0 1-2 2h-.09a1.65 1.65 0 0 0-1.51 1z'%3E%3C/path%3E%3C/svg%3E"); } -span.icon-share { - background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='18' cy='5' r='3'%3E%3C/circle%3E%3Ccircle cx='6' cy='12' r='3'%3E%3C/circle%3E%3Ccircle cx='18' cy='19' r='3'%3E%3C/circle%3E%3Cline x1='8.59' y1='13.51' x2='15.42' y2='17.49'%3E%3C/line%3E%3Cline x1='15.41' y1='6.51' x2='8.59' y2='10.49'%3E%3C/line%3E%3C/svg%3E"); } -span.icon-cart { - background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Ccircle cx='9' cy='21' r='1'%3E%3C/circle%3E%3Ccircle cx='20' cy='21' r='1'%3E%3C/circle%3E%3Cpath d='M1 1h4l2.68 13.39a2 2 0 0 0 2 1.61h9.72a2 2 0 0 0 2-1.61L23 6H6'%3E%3C/path%3E%3C/svg%3E"); } -span.icon-upload { - background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M21 15v4a2 2 0 0 1-2 2H5a2 2 0 0 1-2-2v-4'%3E%3C/path%3E%3Cpolyline points='17 8 12 3 7 8'%3E%3C/polyline%3E%3Cline x1='12' y1='3' x2='12' y2='15'%3E%3C/line%3E%3C/svg%3E"); } -span.icon-user { - background-image: url("data:image/svg+xml,%3Csvg xmlns='http://www.w3.org/2000/svg' width='24' height='24' viewBox='0 0 24 24' fill='none' stroke='%2303234b' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3E%3Cpath d='M20 21v-2a4 4 0 0 0-4-4H8a4 4 0 0 0-4 4v2'%3E%3C/path%3E%3Ccircle cx='12' cy='7' r='4'%3E%3C/circle%3E%3C/svg%3E"); } - -/* - Definitions for utilities and helper classes. -*/ -/* Utility module CSS variable definitions */ -:root { - --generic-border-color: rgba(0, 0, 0, 0.3); - --generic-box-shadow: 0 0.2857142857rem 0.2857142857rem 0 rgba(0, 0, 0, 0.125), 0 0.1428571429rem 0.1428571429rem -0.1428571429rem rgba(0, 0, 0, 0.125); } - -.hidden { - display: none !important; } - -.visually-hidden { - position: absolute !important; - width: 1px !important; - height: 1px !important; - margin: -1px !important; - border: 0 !important; - padding: 0 !important; - clip: rect(0 0 0 0) !important; - -webkit-clip-path: inset(100%) !important; - clip-path: inset(100%) !important; - overflow: hidden !important; } - -.bordered { - border: 0.0714285714rem solid var(--generic-border-color) !important; } - -.rounded { - border-radius: var(--universal-border-radius) !important; } - -.circular { - border-radius: 50% !important; } - -.shadowed { - box-shadow: var(--generic-box-shadow) !important; } - -.responsive-margin { - margin: calc(var(--universal-margin) / 4) !important; } - @media screen and (min-width: 500px) { - .responsive-margin { - margin: calc(var(--universal-margin) / 2) !important; } } - @media screen and (min-width: 1280px) { - .responsive-margin { - margin: var(--universal-margin) !important; } } - -.responsive-padding { - padding: calc(var(--universal-padding) / 4) !important; } - @media screen and (min-width: 500px) { - .responsive-padding { - padding: calc(var(--universal-padding) / 2) !important; } } - @media screen and (min-width: 1280px) { - .responsive-padding { - padding: var(--universal-padding) !important; } } - -@media screen and (max-width: 499px) { - .hidden-sm { - display: none !important; } } -@media screen and (min-width: 500px) and (max-width: 1279px) { - .hidden-md { - display: none !important; } } -@media screen and (min-width: 1280px) { - .hidden-lg { - display: none !important; } } -@media screen and (max-width: 499px) { - .visually-hidden-sm { - position: absolute !important; - width: 1px !important; - height: 1px !important; - margin: -1px !important; - border: 0 !important; - padding: 0 !important; - clip: rect(0 0 0 0) !important; - -webkit-clip-path: inset(100%) !important; - clip-path: inset(100%) !important; - overflow: hidden !important; } } -@media screen and (min-width: 500px) and (max-width: 1279px) { - .visually-hidden-md { - position: absolute !important; - width: 1px !important; - height: 1px !important; - margin: -1px !important; - border: 0 !important; - padding: 0 !important; - clip: rect(0 0 0 0) !important; - -webkit-clip-path: inset(100%) !important; - clip-path: inset(100%) !important; - overflow: hidden !important; } } -@media screen and (min-width: 1280px) { - .visually-hidden-lg { - position: absolute !important; - width: 1px !important; - height: 1px !important; - margin: -1px !important; - border: 0 !important; - padding: 0 !important; - clip: rect(0 0 0 0) !important; - -webkit-clip-path: inset(100%) !important; - clip-path: inset(100%) !important; - overflow: hidden !important; } } - -/*# sourceMappingURL=mini-custom.css.map */ - -img[alt="ST logo"] { display: block; margin: auto; width: 75%; max-width: 250px; min-width: 71px; } -img[alt="Cube logo"] { float: right; width: 30%; max-width: 10rem; min-width: 8rem; padding-right: 1rem;} - -.figure { - display: block; - margin-left: auto; - margin-right: auto; - text-align: center; -} diff --git a/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/_htmresc/st_logo_2020.png b/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/_htmresc/st_logo_2020.png deleted file mode 100644 index d6cebb5ac..000000000 Binary files a/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/_htmresc/st_logo_2020.png and /dev/null differ diff --git a/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/tcpp0203.c b/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/tcpp0203.c deleted file mode 100644 index 952ff16c9..000000000 --- a/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/tcpp0203.c +++ /dev/null @@ -1,886 +0,0 @@ -/** - ****************************************************************************** - * @file tcpp0203.c - * @author MCD Application Team - * @brief This file provides the TCPP02/03 Type-C port protection driver. - ****************************************************************************** - * @attention - * - * Copyright (c) 2021 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "tcpp0203.h" - -#if defined(_TRACE) -#include "usbpd_core.h" -#include "usbpd_trace.h" -#include "string.h" -#include "stdio.h" -#endif /* _TRACE */ - -/** @addtogroup BSP - * @{ - */ - -/** @addtogroup Components - * @{ - */ - -/** @addtogroup TCPP0203 - * @brief This file provides a set of functions needed to drive the - * TCPP02/03 Type-C port protection. - * @{ - */ - -/** @defgroup TCPP0203_Private_Constants Private Constants - * @{ - */ - -/* Compilation option in order to enable/disable a concistency check performed - after each I2C access into TCPP0203 registers : goal is to check that written value in Reg0 - is properly reflected into reg1 register content. - To enable register consistency check, please uncomment below definition. - To disable it, comment below line */ -/* #define TCPP0203_REGISTER_CONSISTENCY_CHECK */ - -/** @defgroup TCPP0203_Private_Types Private Types - * @{ - */ -/* TCPP02/03 Type-C port protection driver structure initialization */ -TCPP0203_Drv_t TCPP0203_Driver = -{ - TCPP0203_Init, - TCPP0203_DeInit, - TCPP0203_Reset, - TCPP0203_SetVConnSwitch, - TCPP0203_SetGateDriverProvider, - TCPP0203_SetGateDriverConsumer, - TCPP0203_SetPowerMode, - TCPP0203_SetVBusDischarge, - TCPP0203_SetVConnDischarge, - TCPP0203_GetVConnSwitchAck, - TCPP0203_GetGateDriverProviderAck, - TCPP0203_GetGateDriverConsumerAck, - TCPP0203_GetPowerModeAck, - TCPP0203_GetVBusDischargeAck, - TCPP0203_GetVConnDischargeAck, - TCPP0203_GetOCPVConnFlag, - TCPP0203_GetOCPVBusFlag, - TCPP0203_GetOVPVBusFlag, - TCPP0203_GetOVPCCFlag, - TCPP0203_GetOTPFlag, - TCPP0203_GetVBusOkFlag, - TCPP0203_ReadTCPPType, - TCPP0203_ReadVCONNPower, - TCPP0203_WriteCtrlRegister, - TCPP0203_ReadAckRegister, - TCPP0203_ReadFlagRegister, -}; - -/** - * @} - */ - -/** @defgroup TCPP0203_Private_Variables Private Variables - * @{ - */ -static uint8_t TCPP0203_DeviceType = TCPP0203_DEVICE_TYPE_03; - -#if defined(TCPP0203_REGISTER_CONSISTENCY_CHECK) -static uint8_t Reg0_Expected_Value = 0x00; -static uint8_t Reg1_LastRead_Value = 0x00; -#endif /* TCPP0203_REGISTER_CONSISTENCY_CHECK */ - -/** - * @} - */ - -/* Private function prototypes -----------------------------------------------*/ - -/** @defgroup TCPP0203_Private_Function_Prototypes TCPP0203 Private Function Prototypes - * @{ - */ -static int32_t TCPP0203_ReadRegWrap(const void *handle, uint8_t Reg, uint8_t *Data, uint8_t Length); -static int32_t TCPP0203_WriteRegWrap(const void *handle, uint8_t Reg, uint8_t *Data, uint8_t Length); - -static int32_t TCPP0203_ModifyReg0(TCPP0203_Object_t *pObj, uint8_t Value, uint8_t Mask); - -#if defined(TCPP0203_REGISTER_CONSISTENCY_CHECK) -static int32_t TCPP0203_CheckReg0Reg1(TCPP0203_Object_t *pObj, uint8_t Reg0ExpectedValue); -#endif /* TCPP0203_REGISTER_CONSISTENCY_CHECK */ - -/** - * @} - */ - -/** @defgroup TCPP0203_Exported_Functions TCPP0203 Exported Functions - * @{ - */ - -/** - * @brief Register Bus Io to component - * @param Component object pointer - * @retval Status of execution - */ -int32_t TCPP0203_RegisterBusIO(TCPP0203_Object_t *pObj, TCPP0203_IO_t *pIO) -{ - int32_t ret; - - if (pObj == NULL) - { - ret = TCPP0203_ERROR; - } - else - { - pObj->IO.Init = pIO->Init; - pObj->IO.DeInit = pIO->DeInit; - pObj->IO.Address = pIO->Address; - pObj->IO.WriteReg = pIO->WriteReg; - pObj->IO.ReadReg = pIO->ReadReg; - pObj->IO.GetTick = pIO->GetTick; - - pObj->Ctx.ReadReg = TCPP0203_ReadRegWrap; - pObj->Ctx.WriteReg = TCPP0203_WriteRegWrap; - pObj->Ctx.handle = pObj; - - if (pObj->IO.Init != NULL) - { - ret = pObj->IO.Init(); - } - else - { - ret = TCPP0203_ERROR; - } - } - - return ret; -} - -/** - * @brief Initializes the TCPP0203 interface - * @param pObj Pointer to component object - * @retval Component status (TCPP0203_OK / TCPP0203_ERROR) - */ -int32_t TCPP0203_Init(TCPP0203_Object_t *pObj) -{ - int32_t ret = 0; - uint8_t tmp; - - if (pObj->IsInitialized == 0U) - { - /* Read TCPP Device type */ - ret += tcpp0203_read_reg(&pObj->Ctx, TCPP0203_READ_REG2, &tmp, 1); - - if (ret == TCPP0203_OK) - { - TCPP0203_DeviceType = (tmp & TCPP0203_DEVICE_TYPE_MSK); - } - else - { - TCPP0203_DeviceType = TCPP0203_DEVICE_TYPE_02; - } - pObj->IsInitialized = 1U; - } - - if (ret != TCPP0203_OK) - { - ret = TCPP0203_ERROR; - } - - return ret; -} - -/** - * @brief Deinitializes the TCPP0203 interface - * @param pObj Pointer to component object - * @retval Component status (TCPP0203_OK / TCPP0203_ERROR) - */ -int32_t TCPP0203_DeInit(TCPP0203_Object_t *pObj) -{ - if (pObj->IsInitialized == 1U) - { - /* De-Initialize IO BUS layer */ - pObj->IO.DeInit(); - - pObj->IsInitialized = 0U; - } - - return TCPP0203_OK; -} - -/** - * @brief Resets TCPP0203 register (Reg0) - * @param pObj Pointer to component object - * @retval Component status (TCPP0203_OK / TCPP0203_ERROR) - */ -int32_t TCPP0203_Reset(TCPP0203_Object_t *pObj) -{ - int32_t ret = TCPP0203_OK; - uint8_t tmp = TCPP0203_REG0_RST_VALUE; - - /* Write reset values in Reg0 register */ - if (tcpp0203_write_reg(&pObj->Ctx, TCPP0203_PROG_CTRL, &tmp, 1) != TCPP0203_OK) - { - ret = TCPP0203_ERROR; - } - -#if defined(TCPP0203_REGISTER_CONSISTENCY_CHECK) - Reg0_Expected_Value = TCPP0203_REG0_RST_VALUE; - Reg1_LastRead_Value = TCPP0203_REG0_RST_VALUE; -#endif /* TCPP0203_REGISTER_CONSISTENCY_CHECK */ - - return ret; -} - -/** - * @brief Configure TCPP0203 VConn Switch - * @param pObj Pointer to component object - * @param VConnSwitch VConn Switch requested setting - * This parameter can be one of the following values: - * @arg TCPP0203_VCONN_SWITCH_OPEN VConn switch open - * @arg TCPP0203_VCONN_SWITCH_CC1 VConn closed on CC1 - * @arg TCPP0203_VCONN_SWITCH_CC2 VConn closed on CC2 - * @retval Component status - */ -int32_t TCPP0203_SetVConnSwitch(TCPP0203_Object_t *pObj, uint8_t VConnSwitch) -{ - int32_t ret = TCPP0203_OK; - - if ((VConnSwitch != TCPP0203_VCONN_SWITCH_OPEN) - && (VConnSwitch != TCPP0203_VCONN_SWITCH_CC1) - && (VConnSwitch != TCPP0203_VCONN_SWITCH_CC2)) - { - ret = TCPP0203_ERROR; - } - else - { - /* Update VConn switch setting in Writing register Reg0 */ - ret += TCPP0203_ModifyReg0(pObj, VConnSwitch, TCPP0203_VCONN_SWITCH_MSK); - } - - return ret; -} - -/** - * @brief Configure TCPP0203 Gate Driver for Provider path - * @param pObj Pointer to component object - * @param GateDriverProvider GDP switch load requested setting - * This parameter can be one of the following values: - * @arg TCPP0203_GD_PROVIDER_SWITCH_OPEN GDP Switch Load Open - * @arg TCPP0203_GD_PROVIDER_SWITCH_CLOSED GDP Switch Load closed - * @retval Component status - */ -int32_t TCPP0203_SetGateDriverProvider(TCPP0203_Object_t *pObj, uint8_t GateDriverProvider) -{ - int32_t ret = TCPP0203_OK; - - if ((GateDriverProvider != TCPP0203_GD_PROVIDER_SWITCH_OPEN) - && (GateDriverProvider != TCPP0203_GD_PROVIDER_SWITCH_CLOSED)) - { - ret = TCPP0203_ERROR; - } - else - { - /* Update GDP Switch Load setting in Writing register Reg0 */ - if (GateDriverProvider == TCPP0203_GD_PROVIDER_SWITCH_CLOSED) - { - /* If Gate Driver Provider is to be closed, Gate Driver Consumer should be open */ - ret += TCPP0203_ModifyReg0(pObj, (GateDriverProvider | TCPP0203_GD_CONSUMER_SWITCH_OPEN), - (TCPP0203_GD_PROVIDER_SWITCH_MSK | TCPP0203_GD_CONSUMER_SWITCH_MSK)); - } - else - { - ret += TCPP0203_ModifyReg0(pObj, GateDriverProvider, TCPP0203_GD_PROVIDER_SWITCH_MSK); - } - } - - return ret; -} - -/** - * @brief Configure TCPP0203 Gate Driver for Consumer path - * @param pObj Pointer to component object - * @param GateDriverConsumer GDC switch load requested setting - * This parameter can be one of the following values: - * @arg TCPP0203_GD_CONSUMER_SWITCH_OPEN GDC Switch Load Open - * @arg TCPP0203_GD_CONSUMER_SWITCH_CLOSED GDC Switch Load closed - * @retval Component status - */ -int32_t TCPP0203_SetGateDriverConsumer(TCPP0203_Object_t *pObj, uint8_t GateDriverConsumer) -{ - int32_t ret = TCPP0203_OK; - - /* Check if TCPP type is TCPP03. Otherwise, return error */ - if (TCPP0203_DeviceType != TCPP0203_DEVICE_TYPE_03) - { - return (TCPP0203_ERROR); - } - - if ((GateDriverConsumer != TCPP0203_GD_CONSUMER_SWITCH_OPEN) - && (GateDriverConsumer != TCPP0203_GD_CONSUMER_SWITCH_CLOSED)) - { - ret = TCPP0203_ERROR; - } - else - { - /* Update GDC Switch Load setting in Writing register Reg0 */ - if (GateDriverConsumer == TCPP0203_GD_CONSUMER_SWITCH_CLOSED) - { - /* If Gate Driver Consumer is to be closed, Gate Driver Provider should be open */ - ret += TCPP0203_ModifyReg0(pObj, (GateDriverConsumer | TCPP0203_GD_PROVIDER_SWITCH_OPEN), - (TCPP0203_GD_PROVIDER_SWITCH_MSK | TCPP0203_GD_CONSUMER_SWITCH_MSK)); - } - else - { - ret += TCPP0203_ModifyReg0(pObj, GateDriverConsumer, TCPP0203_GD_CONSUMER_SWITCH_MSK); - } - } - - return ret; -} - -/** - * @brief Configure TCPP0203 Power Mode - * @param pObj Pointer to component object - * @param PowerMode Power mode requested setting - * This parameter can be one of the following values: - * @arg TCPP0203_POWER_MODE_HIBERNATE Hibernate - * @arg TCPP0203_POWER_MODE_LOWPOWER Low Power - * @arg TCPP0203_POWER_MODE_NORMAL Normal - * @retval Component status - */ -int32_t TCPP0203_SetPowerMode(TCPP0203_Object_t *pObj, uint8_t PowerMode) -{ - int32_t ret = TCPP0203_OK; - - if ((PowerMode != TCPP0203_POWER_MODE_HIBERNATE) - && (PowerMode != TCPP0203_POWER_MODE_LOWPOWER) - && (PowerMode != TCPP0203_POWER_MODE_NORMAL)) - { - ret = TCPP0203_ERROR; - } - else - { - /* Update Power Mode setting in Writing register Reg0 */ - ret += TCPP0203_ModifyReg0(pObj, PowerMode, TCPP0203_POWER_MODE_MSK); - } - - return ret; -} - -/** - * @brief Configure TCPP0203 Gate Driver for Provider path - * @param pObj Pointer to component object - * @param VBusDischarge VBUS Discharge requested setting - * This parameter can be one of the following values: - * @arg TCPP0203_VBUS_DISCHARGE_OFF VBUS Discharge Off - * @arg TCPP0203_VBUS_DISCHARGE_ON VBUS Discharge On - * @retval Component status - */ -int32_t TCPP0203_SetVBusDischarge(TCPP0203_Object_t *pObj, uint8_t VBusDischarge) -{ - int32_t ret = TCPP0203_OK; - - if ((VBusDischarge != TCPP0203_VBUS_DISCHARGE_OFF) - && (VBusDischarge != TCPP0203_VBUS_DISCHARGE_ON)) - { - ret = TCPP0203_ERROR; - } - else - { - /* Update VBUS Discharge setting in Writing register Reg0 */ - ret += TCPP0203_ModifyReg0(pObj, VBusDischarge, TCPP0203_VBUS_DISCHARGE_MSK); - } - - return ret; -} - -/** - * @brief Configure TCPP0203 Gate Driver for Provider path - * @param pObj Pointer to component object - * @param VConnDischarge GDP switch load requested setting - * This parameter can be one of the following values: - * @arg TCPP0203_VCONN_DISCHARGE_OFF VConn Discharge Off - * @arg TCPP0203_VCONN_DISCHARGE_ON VConn Discharge On - * @retval Component status - */ -int32_t TCPP0203_SetVConnDischarge(TCPP0203_Object_t *pObj, uint8_t VConnDischarge) -{ - int32_t ret = TCPP0203_OK; - - if ((VConnDischarge != TCPP0203_VCONN_DISCHARGE_OFF) - && (VConnDischarge != TCPP0203_VCONN_DISCHARGE_ON)) - { - ret = TCPP0203_ERROR; - } - else - { - /* Update VConn Discharge setting in Writing register Reg0 */ - ret += TCPP0203_ModifyReg0(pObj, VConnDischarge, TCPP0203_VCONN_DISCHARGE_MSK); - } - - return ret; -} - -/** - * @brief Get VConn switch Ack value - * @param pObj Pointer to component object - * @param pVConnSwitchAck Pointer on VConn switch Ack value - * This output parameter can be one of the following values: - * @arg TCPP0203_VCONN_SWITCH_OPEN VConn switch open Ack - * @arg TCPP0203_VCONN_SWITCH_CC1 VConn closed on CC1 Ack - * @arg TCPP0203_VCONN_SWITCH_CC2 VConn closed on CC2 Ack - * @retval Component status - */ -int32_t TCPP0203_GetVConnSwitchAck(TCPP0203_Object_t *pObj, uint8_t *pVConnSwitchAck) -{ - int32_t ret; - uint8_t tmp; - - ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_ACK_REG, &tmp, 1); - *pVConnSwitchAck = (tmp & TCPP0203_VCONN_SWITCH_ACK_MSK); - - return ret; -} - -/** - * @brief Get Gate Driver Provider Ack value - * @param pObj Pointer to component object - * @param pGateDriverProviderAck Pointer on Gate Driver Provider Ack value - * This output parameter can be one of the following values: - * @arg TCPP0203_GD_PROVIDER_SWITCH_ACK_OPEN Gate Driver Provider Open Ack - * @arg TCPP0203_GD_PROVIDER_SWITCH_ACK_CLOSED Gate Driver Provider Closed Ack - * @retval Component status - */ -int32_t TCPP0203_GetGateDriverProviderAck(TCPP0203_Object_t *pObj, uint8_t *pGateDriverProviderAck) -{ - int32_t ret; - uint8_t tmp; - - ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_ACK_REG, &tmp, 1); - *pGateDriverProviderAck = (tmp & TCPP0203_GD_PROVIDER_SWITCH_ACK_MSK); - - return ret; -} - -/** - * @brief Get Gate Driver Consumer Ack value - * @param pObj Pointer to component object - * @param pGateDriverConsumerAck Pointer on Gate Driver Consumer Ack value - * This output parameter can be one of the following values: - * @arg TCPP0203_GD_CONSUMER_SWITCH_ACK_OPEN Gate Driver Consumer Open Ack - * @arg TCPP0203_GD_CONSUMER_SWITCH_ACK_CLOSED Gate Driver Consumer Closed Ack - * @retval Component status - */ -int32_t TCPP0203_GetGateDriverConsumerAck(TCPP0203_Object_t *pObj, uint8_t *pGateDriverConsumerAck) -{ - int32_t ret; - uint8_t tmp; - - /* Check if TCPP type is TCPP03. Otherwise, return error */ - if (TCPP0203_DeviceType != TCPP0203_DEVICE_TYPE_03) - { - return (TCPP0203_ERROR); - } - - ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_ACK_REG, &tmp, 1); - *pGateDriverConsumerAck = (tmp & TCPP0203_GD_CONSUMER_SWITCH_ACK_MSK); - - return ret; -} - -/** - * @brief Get Power Mode Ack value - * @param pObj Pointer to component object - * @param pPowerModeAck Pointer on Power Mode Ack value - * This output parameter can be one of the following values: - * @arg TCPP0203_POWER_MODE_ACK_HIBERNATE Power Mode Hibernate Ack - * @arg TCPP0203_POWER_MODE_ACK_LOWPOWER Power Mode Low Power Ack - * @arg TCPP0203_POWER_MODE_ACK_NORMAL Power Mode Normal Ack - * @retval Component status - */ -int32_t TCPP0203_GetPowerModeAck(TCPP0203_Object_t *pObj, uint8_t *pPowerModeAck) -{ - int32_t ret; - uint8_t tmp; - - ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_ACK_REG, &tmp, 1); - *pPowerModeAck = (tmp & TCPP0203_POWER_MODE_ACK_MSK); - - return ret; -} - -/** - * @brief Get VBUS Discharge Ack value - * @param pObj Pointer to component object - * @param pVBusDischargeAck Pointer on VBUS Discharge Ack value - * This output parameter can be one of the following values: - * @arg TCPP0203_VBUS_DISCHARGE_ACK_OFF VBUS Discharge Off Ack - * @arg TCPP0203_VBUS_DISCHARGE_ACK_ON VBUS Discharge On Ack - * @retval Component status - */ -int32_t TCPP0203_GetVBusDischargeAck(TCPP0203_Object_t *pObj, uint8_t *pVBusDischargeAck) -{ - int32_t ret; - uint8_t tmp; - - ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_ACK_REG, &tmp, 1); - *pVBusDischargeAck = (tmp & TCPP0203_VBUS_DISCHARGE_ACK_MSK); - - return ret; -} - -/** - * @brief Get VConn Discharge Ack value - * @param pObj Pointer to component object - * @param pVConnDischargeAck Pointer on VConn Discharge Ack value - * This output parameter can be one of the following values: - * @arg TCPP0203_VCONN_DISCHARGE_ACK_OFF VConn Discharge Off Ack - * @arg TCPP0203_VCONN_DISCHARGE_ACK_ON VConn Discharge On Ack - * @retval Component status - */ -int32_t TCPP0203_GetVConnDischargeAck(TCPP0203_Object_t *pObj, uint8_t *pVConnDischargeAck) -{ - int32_t ret; - uint8_t tmp; - - ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_ACK_REG, &tmp, 1); - *pVConnDischargeAck = (tmp & TCPP0203_VCONN_DISCHARGE_ACK_MSK); - - return ret; -} - -/** - * @brief Get OCP VConn Flag value - * @param pObj Pointer to component object - * @param pOCPVConnFlag Pointer on OCP VConn Flag value - * This output parameter can be one of the following values: - * @arg TCPP0203_FLAG_OCP_VCONN_RESET OCP VConn flag not set - * @arg TCPP0203_FLAG_OCP_VCONN_SET OCP VConn flag set - * @retval Component status - */ -int32_t TCPP0203_GetOCPVConnFlag(TCPP0203_Object_t *pObj, uint8_t *pOCPVConnFlag) -{ - int32_t ret; - uint8_t tmp; - - ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_FLAG_REG, &tmp, 1); - *pOCPVConnFlag = (tmp & TCPP0203_FLAG_OCP_VCONN_MSK); - - return ret; -} - -/** - * @brief Get OCP VBUS Flag value - * @param pObj Pointer to component object - * @param pGetOCPVBusFlag Pointer on OCP VBUS Flag value - * This output parameter can be one of the following values: - * @arg TCPP0203_FLAG_OCP_VBUS_RESET OCP VBUS flag not set - * @arg TCPP0203_FLAG_OCP_VBUS_SET OCP VBUS flag set - * @retval Component status - */ -int32_t TCPP0203_GetOCPVBusFlag(TCPP0203_Object_t *pObj, uint8_t *pGetOCPVBusFlag) -{ - int32_t ret; - uint8_t tmp; - - ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_FLAG_REG, &tmp, 1); - *pGetOCPVBusFlag = (tmp & TCPP0203_FLAG_OCP_VBUS_MSK); - - return ret; -} - -/** - * @brief Get OVP VBUS Flag value - * @param pObj Pointer to component object - * @param pOVPVBusFlag Pointer on OVP VBUS Flag value - * This output parameter can be one of the following values: - * @arg TCPP0203_FLAG_OVP_VBUS_RESET OVP VBUS flag not set - * @arg TCPP0203_FLAG_OVP_VBUS_SET OVP VBUS flag set - * @retval Component status - */ -int32_t TCPP0203_GetOVPVBusFlag(TCPP0203_Object_t *pObj, uint8_t *pOVPVBusFlag) -{ - int32_t ret; - uint8_t tmp; - - ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_FLAG_REG, &tmp, 1); - *pOVPVBusFlag = (tmp & TCPP0203_FLAG_OVP_VBUS_MSK); - - return ret; -} - -/** - * @brief Get OVP CC Flag value - * @param pObj Pointer to component object - * @param pOVPCCFlag Pointer on OVP CC Flag value - * This output parameter can be one of the following values: - * @arg TCPP0203_FLAG_OVP_CC_RESET OVP CC flag not set - * @arg TCPP0203_FLAG_OVP_CC_SET OVP CC flag set - * @retval Component status - */ -int32_t TCPP0203_GetOVPCCFlag(TCPP0203_Object_t *pObj, uint8_t *pOVPCCFlag) -{ - int32_t ret; - uint8_t tmp; - - ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_FLAG_REG, &tmp, 1); - *pOVPCCFlag = (tmp & TCPP0203_FLAG_OVP_CC_MSK); - - return ret; -} - -/** - * @brief Get Over Temperature Flag value - * @param pObj Pointer to component object - * @param pOTPFlag Pointer on Over Temperature Flag value - * This output parameter can be one of the following values: - * @arg TCPP0203_FLAG_OTP_RESET Over Temperature flag not set - * @arg TCPP0203_FLAG_OTP_SET Over Temperature flag set - * @retval Component status - */ -int32_t TCPP0203_GetOTPFlag(TCPP0203_Object_t *pObj, uint8_t *pOTPFlag) -{ - int32_t ret; - uint8_t tmp; - - ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_FLAG_REG, &tmp, 1); - *pOTPFlag = (tmp & TCPP0203_FLAG_OTP_MSK); - - return ret; -} - -/** - * @brief Get VBUS OK Flag value - * @param pObj Pointer to component object - * @param pVBusOkFlag Pointer on VBUS OK Flag value - * This output parameter can be one of the following values: - * @arg TCPP0203_FLAG_VBUS_OK_RESET VBUS OK flag not set - * @arg TCPP0203_FLAG_VBUS_OK_SET VBUS OK flag set - * @retval Component status - */ -int32_t TCPP0203_GetVBusOkFlag(TCPP0203_Object_t *pObj, uint8_t *pVBusOkFlag) -{ - int32_t ret; - uint8_t tmp; - - ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_FLAG_REG, &tmp, 1); - *pVBusOkFlag = (tmp & TCPP0203_FLAG_VBUS_OK_MSK); - - return ret; -} - -/** - * @brief Get TCPP0203 Device Type value - * @param pObj Pointer to component object - * @param pTCPPType Pointer on TCPP0203 Device Type value - * This output parameter can be one of the following values: - * @arg TCPP0203_DEVICE_TYPE_02 TCPP02 Type - * @arg TCPP0203_DEVICE_TYPE_03 TCPP03 Type - * @retval Component status - */ -int32_t TCPP0203_ReadTCPPType(TCPP0203_Object_t *pObj, uint8_t *pTCPPType) -{ - int32_t ret; - uint8_t tmp; - - ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_FLAG_REG, &tmp, 1); - *pTCPPType = (tmp & TCPP0203_DEVICE_TYPE_MSK); - - return ret; -} - -/** - * @brief Get VConn Power value - * @param pObj Pointer to component object - * @param pVCONNPower Pointer on VConn Power value - * This output parameter can be one of the following values: - * @arg TCPP0203_FLAG_VCONN_PWR_1W OCP VConn flag not set - * @arg TCPP0203_FLAG_VCONN_PWR_0_1W OCP VConn flag set - * @retval Component status - */ -int32_t TCPP0203_ReadVCONNPower(TCPP0203_Object_t *pObj, uint8_t *pVCONNPower) -{ - int32_t ret; - uint8_t tmp; - - ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_FLAG_REG, &tmp, 1); - *pVCONNPower = (tmp & TCPP0203_FLAG_VCONN_PWR_MSK); - - return ret; -} - -/** - * @brief Set complete Ctrl register value (Reg 0) - * @param pObj Pointer to component object - * @param pCtrlRegister Pointer on Ctrl register value - * @retval Component status - */ -int32_t TCPP0203_WriteCtrlRegister(TCPP0203_Object_t *pObj, uint8_t *pCtrlRegister) -{ - int32_t ret; - - /* Update value in writing register (reg0) */ - ret = tcpp0203_write_reg(&pObj->Ctx, TCPP0203_PROG_CTRL, pCtrlRegister, 1); - -#if defined(TCPP0203_REGISTER_CONSISTENCY_CHECK) - Reg0_Expected_Value = *pCtrlRegister; -#endif /* TCPP0203_REGISTER_CONSISTENCY_CHECK */ - - return ret; -} - -/** - * @brief Get complete Ack register value - * @param pObj Pointer to component object - * @param pAckRegister Pointer on Ack register value - * @retval Component status - */ -int32_t TCPP0203_ReadAckRegister(TCPP0203_Object_t *pObj, uint8_t *pAckRegister) -{ - int32_t ret; - - ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_ACK_REG, pAckRegister, 1); - - return ret; -} - -/** - * @brief Get complete Flag register value - * @param pObj Pointer to component object - * @param pFlagRegister Pointer on Flag register value - * @retval Component status - */ -int32_t TCPP0203_ReadFlagRegister(TCPP0203_Object_t *pObj, uint8_t *pFlagRegister) -{ - int32_t ret; - - ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_FLAG_REG, pFlagRegister, 1); - - return ret; -} - -/******************** Static functions ****************************************/ -/** - * @brief Wrap TCPP0203 read function to Bus IO function - * @param handle Component object handle - * @param Reg Target register address to read - * @param pData Buffer where Target register value should be stored - * @param Length buffer size to be read - * @retval error status - */ -static int32_t TCPP0203_ReadRegWrap(const void *handle, uint8_t Reg, uint8_t *pData, uint8_t Length) -{ - const TCPP0203_Object_t *pObj = (const TCPP0203_Object_t *)handle; - - return pObj->IO.ReadReg(pObj->IO.Address, Reg, pData, Length); -} - -/** - * @brief Wrap TCPP0203 write function to Bus IO function - * @param handle Component object handle - * @param Reg Target register address to write - * @param pData Target register value to be written - * @param Length Buffer size to be written - * @retval error status - */ -static int32_t TCPP0203_WriteRegWrap(const void *handle, uint8_t Reg, uint8_t *pData, uint8_t Length) -{ - const TCPP0203_Object_t *pObj = (const TCPP0203_Object_t *)handle; - -#if defined(TCPP0203_REGISTER_CONSISTENCY_CHECK) - Reg0_Expected_Value = *pData; -#endif /* TCPP0203_REGISTER_CONSISTENCY_CHECK */ - - return pObj->IO.WriteReg(pObj->IO.Address, Reg, pData, Length); -} - -/** - * @brief TCPP0203 register update function to Bus IO function - * @param handle Component object handle - * @param Reg Target register address to write - * @param pData Target register value to be written - * @param Length Buffer size to be written - * @retval error status - */ -static int32_t TCPP0203_ModifyReg0(TCPP0203_Object_t *pObj, uint8_t Value, uint8_t Mask) -{ - int32_t ret; - uint8_t tmp; - - /* Read current content of ACK register (reflects content of bits set to 1 in Writing register Reg0) */ - ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_ACK_REG, &tmp, 1); - - /* Update only the area dedicated to Mask */ - tmp &= ~(Mask); - tmp |= (Value & Mask); - -#if defined(TCPP0203_REGISTER_CONSISTENCY_CHECK) - Reg0_Expected_Value = tmp; -#endif /* TCPP0203_REGISTER_CONSISTENCY_CHECK */ - - /* Update value in writing register (reg0) */ - ret += tcpp0203_write_reg(&pObj->Ctx, TCPP0203_PROG_CTRL, &tmp, 1); - -#if defined(TCPP0203_REGISTER_CONSISTENCY_CHECK) - ret += TCPP0203_CheckReg0Reg1(pObj, Reg0_Expected_Value); -#endif /* TCPP0203_REGISTER_CONSISTENCY_CHECK */ - - return ret; -} - -#if defined(TCPP0203_REGISTER_CONSISTENCY_CHECK) -/** - * @brief TCPP0203 register control function between Reg0 and Reg1 value - * @param handle Component object handle - * @param Reg0ExpectedValue Value expected in Reg0 (built after all calls to write functions) - * @retval error status - */ -static int32_t TCPP0203_CheckReg0Reg1(TCPP0203_Object_t *pObj, uint8_t Reg0ExpectedValue) -{ - int32_t ret; - - /* Read current content of ACK register (expected to reflect content of bits set to 1 in Writing register Reg0) */ - ret = tcpp0203_read_reg(&pObj->Ctx, TCPP0203_ACK_REG, &Reg1_LastRead_Value, 1); - -#ifdef _TRACE - char str[12]; - sprintf(str, "Exp0_0x%02x", Reg0ExpectedValue); - USBPD_TRACE_Add(USBPD_TRACE_DEBUG, 0U, 0U, (uint8_t *)str, sizeof(str) - 1U); - sprintf(str, "Reg1_0x%02x", Reg1_LastRead_Value); - USBPD_TRACE_Add(USBPD_TRACE_DEBUG, 0U, 0U, (uint8_t *)str, sizeof(str) - 1U); -#endif /* _TRACE */ - - /* Control if Reg1 value is same as Reg0 expected one */ - if (Reg1_LastRead_Value != Reg0ExpectedValue) - { - while (1); - } - - return ret; -} -#endif /* TCPP0203_REGISTER_CONSISTENCY_CHECK */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ diff --git a/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/tcpp0203.h b/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/tcpp0203.h deleted file mode 100644 index 271b534fc..000000000 --- a/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/tcpp0203.h +++ /dev/null @@ -1,353 +0,0 @@ -/** - ****************************************************************************** - * @file tcpp0203.h - * @author MCD Application Team - * @brief This file contains all the functions prototypes for the - * tcpp0203.c driver. - ****************************************************************************** - * @attention - * - * Copyright (c) 2021 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef TCPP0203_H -#define TCPP0203_H - -/* Includes ------------------------------------------------------------------*/ -#include "tcpp0203_reg.h" -#include - -/** @addtogroup BSP - * @{ - */ - -/** @addtogroup Component - * @{ - */ - -/** @addtogroup TCPP0203 - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ - -/** @defgroup TCPP0203_Exported_Types TCPP0203 Exported Types - * @{ - */ -typedef int32_t (*TCPP0203_Init_Func)(void); -typedef int32_t (*TCPP0203_DeInit_Func)(void); -typedef int32_t (*TCPP0203_GetTick_Func)(void); -typedef int32_t (*TCPP0203_WriteReg_Func)(uint16_t, uint16_t, uint8_t *, uint16_t); -typedef int32_t (*TCPP0203_ReadReg_Func)(uint16_t, uint16_t, uint8_t *, uint16_t); - -typedef struct -{ - TCPP0203_Init_Func Init; - TCPP0203_DeInit_Func DeInit; - uint16_t Address; - TCPP0203_WriteReg_Func WriteReg; - TCPP0203_ReadReg_Func ReadReg; - TCPP0203_GetTick_Func GetTick; -} TCPP0203_IO_t; - - -typedef struct -{ - TCPP0203_IO_t IO; - TCPP0203_ctx_t Ctx; - uint8_t IsInitialized; -} TCPP0203_Object_t; - -typedef struct -{ - int32_t (*Init)(TCPP0203_Object_t *); - int32_t (*DeInit)(TCPP0203_Object_t *); - int32_t (*Reset)(TCPP0203_Object_t *); - int32_t (*SetVConnSwitch)(TCPP0203_Object_t *, uint8_t); - int32_t (*SetGateDriverProvider)(TCPP0203_Object_t *, uint8_t); - int32_t (*SetGateDriverConsumer)(TCPP0203_Object_t *, uint8_t); - int32_t (*SetPowerMode)(TCPP0203_Object_t *, uint8_t); - int32_t (*SetVBusDischarge)(TCPP0203_Object_t *, uint8_t); - int32_t (*SetVConnDischarge)(TCPP0203_Object_t *, uint8_t); - int32_t (*GetVConnSwitchAck)(TCPP0203_Object_t *, uint8_t *); - int32_t (*GetGateDriverProviderAck)(TCPP0203_Object_t *, uint8_t *); - int32_t (*GetGateDriverConsumerAck)(TCPP0203_Object_t *, uint8_t *); - int32_t (*GetPowerModeAck)(TCPP0203_Object_t *, uint8_t *); - int32_t (*GetVBusDischargeAck)(TCPP0203_Object_t *, uint8_t *); - int32_t (*GetVConnDischargeAck)(TCPP0203_Object_t *, uint8_t *); - int32_t (*GetOCPVConnFlag)(TCPP0203_Object_t *, uint8_t *); - int32_t (*GetOCPVBusFlag)(TCPP0203_Object_t *, uint8_t *); - int32_t (*GetOVPVBusFlag)(TCPP0203_Object_t *, uint8_t *); - int32_t (*GetOVPCCFlag)(TCPP0203_Object_t *, uint8_t *); - int32_t (*GetOTPFlag)(TCPP0203_Object_t *, uint8_t *); - int32_t (*GetVBusOkFlag)(TCPP0203_Object_t *, uint8_t *); - int32_t (*ReadTCPPType)(TCPP0203_Object_t *, uint8_t *); - int32_t (*ReadVCONNPower)(TCPP0203_Object_t *, uint8_t *); - int32_t (*WriteCtrlRegister)(TCPP0203_Object_t *, uint8_t *); - int32_t (*ReadAckRegister)(TCPP0203_Object_t *, uint8_t *); - int32_t (*ReadFlagRegister)(TCPP0203_Object_t *, uint8_t *); -} TCPP0203_Drv_t; - -/** - * @} - */ - -/** @defgroup TCPP0203_Exported_Constants TCPP0203 Exported Constants - * @{ - */ -/** - * @brief TCPP0203 Driver Response codes - */ -#define TCPP0203_OK (0) -#define TCPP0203_ERROR (-1) - -/** - * @brief TCPP0203 possible I2C Addresses - */ -#define TCPP0203_I2C_ADDRESS_X68 (0x68U) -#define TCPP0203_I2C_ADDRESS_X6A (0x6AU) - -/** - * @brief TCPP0203 Reg0 Reset Value - */ -#define TCPP0203_REG0_RST_VALUE TCPP0203_GD_CONSUMER_SWITCH_CLOSED - -/** - * @brief TCPP0203 VCONN Switch - */ -#define TCPP0203_VCONN_SWITCH_POS (0U) -#define TCPP0203_VCONN_SWITCH_MSK (0x03U << TCPP0203_VCONN_SWITCH_POS) -#define TCPP0203_VCONN_SWITCH_OPEN (0x00U) -#define TCPP0203_VCONN_SWITCH_CC1 (0x01U << TCPP0203_VCONN_SWITCH_POS) -#define TCPP0203_VCONN_SWITCH_CC2 (0x02U << TCPP0203_VCONN_SWITCH_POS) - -/** - * @brief TCPP0203 Gate Driver Provider values - */ -#define TCPP0203_GD_PROVIDER_SWITCH_POS (2U) -#define TCPP0203_GD_PROVIDER_SWITCH_MSK (0x01U << TCPP0203_GD_PROVIDER_SWITCH_POS) -#define TCPP0203_GD_PROVIDER_SWITCH_OPEN (0x00U) -#define TCPP0203_GD_PROVIDER_SWITCH_CLOSED (TCPP0203_GD_PROVIDER_SWITCH_MSK) - -/** - * @brief TCPP0203 Gate Driver Consumer values - */ -#define TCPP0203_GD_CONSUMER_SWITCH_POS (3U) -#define TCPP0203_GD_CONSUMER_SWITCH_MSK (0x01U << TCPP0203_GD_CONSUMER_SWITCH_POS) -#define TCPP0203_GD_CONSUMER_SWITCH_CLOSED (0x00U) -#define TCPP0203_GD_CONSUMER_SWITCH_OPEN (TCPP0203_GD_CONSUMER_SWITCH_MSK) - -/** - * @brief TCPP0203 Power Mode values - */ -#define TCPP0203_POWER_MODE_POS (4U) -#define TCPP0203_POWER_MODE_MSK (0x03U << TCPP0203_POWER_MODE_POS) -#define TCPP0203_POWER_MODE_HIBERNATE (0x00U) -#define TCPP0203_POWER_MODE_LOWPOWER (0x02U << TCPP0203_POWER_MODE_POS) -#define TCPP0203_POWER_MODE_NORMAL (0x01U << TCPP0203_POWER_MODE_POS) - -/** - * @brief TCPP0203 VBUS Discharge management - */ -#define TCPP0203_VBUS_DISCHARGE_POS (6U) -#define TCPP0203_VBUS_DISCHARGE_MSK (0x01U << TCPP0203_VBUS_DISCHARGE_POS) -#define TCPP0203_VBUS_DISCHARGE_OFF (0x00U) -#define TCPP0203_VBUS_DISCHARGE_ON (TCPP0203_VBUS_DISCHARGE_MSK) - -/** - * @brief TCPP0203 VConn Discharge management - */ -#define TCPP0203_VCONN_DISCHARGE_POS (7U) -#define TCPP0203_VCONN_DISCHARGE_MSK (0x01U << TCPP0203_VCONN_DISCHARGE_POS) -#define TCPP0203_VCONN_DISCHARGE_OFF (0x00U) -#define TCPP0203_VCONN_DISCHARGE_ON (TCPP0203_VCONN_DISCHARGE_MSK) - -/** - * @brief TCPP0203 VCONN Switch Acknowledge - */ -#define TCPP0203_VCONN_SWITCH_ACK_POS (0U) -#define TCPP0203_VCONN_SWITCH_ACK_MSK (0x03U << TCPP0203_VCONN_SWITCH_ACK_POS) -#define TCPP0203_VCONN_SWITCH_ACK_OPEN (0x00U) -#define TCPP0203_VCONN_SWITCH_ACK_CC1 (0x02U << TCPP0203_VCONN_SWITCH_ACK_POS) -#define TCPP0203_VCONN_SWITCH_ACK_CC2 (0x01U << TCPP0203_VCONN_SWITCH_ACK_POS) - -/** - * @brief TCPP0203 Gate Driver Provider Acknowledge - */ -#define TCPP0203_GD_PROVIDER_SWITCH_ACK_POS (2U) -#define TCPP0203_GD_PROVIDER_SWITCH_ACK_MSK (0x01U << TCPP0203_GD_PROVIDER_SWITCH_ACK_POS) -#define TCPP0203_GD_PROVIDER_SWITCH_ACK_OPEN (0x00U) -#define TCPP0203_GD_PROVIDER_SWITCH_ACK_CLOSED (TCPP0203_GD_PROVIDER_SWITCH_ACK_MSK) - -/** - * @brief TCPP0203 Gate Driver Consumer Acknowledge - */ -#define TCPP0203_GD_CONSUMER_SWITCH_ACK_POS (3U) -#define TCPP0203_GD_CONSUMER_SWITCH_ACK_MSK (0x01U << TCPP0203_GD_CONSUMER_SWITCH_ACK_POS) -#define TCPP0203_GD_CONSUMER_SWITCH_ACK_CLOSED (0x00U) -#define TCPP0203_GD_CONSUMER_SWITCH_ACK_OPEN (TCPP0203_GD_CONSUMER_SWITCH_ACK_MSK) - -/** - * @brief TCPP0203 Power Mode Acknowledge - */ -#define TCPP0203_POWER_MODE_ACK_POS (4U) -#define TCPP0203_POWER_MODE_ACK_MSK (0x03U << TCPP0203_POWER_MODE_ACK_POS) -#define TCPP0203_POWER_MODE_ACK_HIBERNATE (0x00U) -#define TCPP0203_POWER_MODE_ACK_LOWPOWER (0x01U << TCPP0203_POWER_MODE_ACK_POS) -#define TCPP0203_POWER_MODE_ACK_NORMAL (0x02U << TCPP0203_POWER_MODE_ACK_POS) - -/** - * @brief TCPP0203 VBUS Discharge Acknowledge - */ -#define TCPP0203_VBUS_DISCHARGE_ACK_POS (6U) -#define TCPP0203_VBUS_DISCHARGE_ACK_MSK (0x01U << TCPP0203_VBUS_DISCHARGE_ACK_POS) -#define TCPP0203_VBUS_DISCHARGE_ACK_OFF (0x00U) -#define TCPP0203_VBUS_DISCHARGE_ACK_ON (TCPP0203_VBUS_DISCHARGE_ACK_MSK) - -/** - * @brief TCPP0203 VConn Discharge Acknowledge - */ -#define TCPP0203_VCONN_DISCHARGE_ACK_POS (7U) -#define TCPP0203_VCONN_DISCHARGE_ACK_MSK (0x01U << TCPP0203_VCONN_DISCHARGE_ACK_POS) -#define TCPP0203_VCONN_DISCHARGE_ACK_OFF (0x00U) -#define TCPP0203_VCONN_DISCHARGE_ACK_ON (TCPP0203_VCONN_DISCHARGE_ACK_MSK) - -/** - * @brief TCPP0203 OCP Vconn Flag management - */ -#define TCPP0203_FLAG_OCP_VCONN_POS (0U) -#define TCPP0203_FLAG_OCP_VCONN_MSK (0x01U << TCPP0203_FLAG_OCP_VCONN_POS) -#define TCPP0203_FLAG_OCP_VCONN_SET (TCPP0203_FLAG_OCP_VCONN_MSK) -#define TCPP0203_FLAG_OCP_VCONN_RESET (0x00U) - -/** - * @brief TCPP0203 OCP VBUS Flag management - */ -#define TCPP0203_FLAG_OCP_VBUS_POS (1U) -#define TCPP0203_FLAG_OCP_VBUS_MSK (0x01U << TCPP0203_FLAG_OCP_VBUS_POS) -#define TCPP0203_FLAG_OCP_VBUS_SET (TCPP0203_FLAG_OCP_VBUS_MSK) -#define TCPP0203_FLAG_OCP_VBUS_RESET (0x00U) - -/** - * @brief TCPP0203 OVP VBUS Flag management - */ -#define TCPP0203_FLAG_OVP_VBUS_POS (2U) -#define TCPP0203_FLAG_OVP_VBUS_MSK (0x01U << TCPP0203_FLAG_OVP_VBUS_POS) -#define TCPP0203_FLAG_OVP_VBUS_SET (TCPP0203_FLAG_OVP_VBUS_MSK) -#define TCPP0203_FLAG_OVP_VBUS_RESET (0x00U) - -/** - * @brief TCPP0203 OVP CC Flag management - */ -#define TCPP0203_FLAG_OVP_CC_POS (3U) -#define TCPP0203_FLAG_OVP_CC_MSK (0x01U << TCPP0203_FLAG_OVP_CC_POS) -#define TCPP0203_FLAG_OVP_CC_SET (TCPP0203_FLAG_OVP_CC_MSK) -#define TCPP0203_FLAG_OVP_CC_RESET (0x00U) - -/** - * @brief TCPP0203 OTP Flag management - */ -#define TCPP0203_FLAG_OTP_POS (4U) -#define TCPP0203_FLAG_OTP_MSK (0x01U << TCPP0203_FLAG_OTP_POS) -#define TCPP0203_FLAG_OTP_SET (TCPP0203_FLAG_OTP_MSK) -#define TCPP0203_FLAG_OTP_RESET (0x00U) - -/** - * @brief TCPP0203 VBUS OK Flag management - */ -#define TCPP0203_FLAG_VBUS_OK_POS (5U) -#define TCPP0203_FLAG_VBUS_OK_MSK (0x01U << TCPP0203_FLAG_VBUS_OK_POS) -#define TCPP0203_FLAG_VBUS_OK_SET (TCPP0203_FLAG_VBUS_OK_MSK) -#define TCPP0203_FLAG_VBUS_OK_RESET (0x00U) - -/** - * @brief TCPP0203 VConn Power - */ -#define TCPP0203_FLAG_VCONN_PWR_POS (6U) -#define TCPP0203_FLAG_VCONN_PWR_MSK (0x01U << TCPP0203_FLAG_VCONN_PWR_POS) -#define TCPP0203_FLAG_VCONN_PWR_1W (TCPP0203_FLAG_VCONN_PWR_MSK) -#define TCPP0203_FLAG_VCONN_PWR_0_1W (0x00U) - -/** - * @brief TCPP0203 Device Type - */ -#define TCPP0203_DEVICE_TYPE_POS (7U) -#define TCPP0203_DEVICE_TYPE_MSK (0x01U << TCPP0203_DEVICE_TYPE_POS) -#define TCPP0203_DEVICE_TYPE_02 (TCPP0203_DEVICE_TYPE_MSK) -#define TCPP0203_DEVICE_TYPE_03 (0x00U) - -/** - * @} - */ - -/** @defgroup TCPP0203_Exported_Macros TCPP0203 Exported Macros - * @{ - */ -/** - * @} - */ - -/** @defgroup TCPP0203_Exported_Functions TCPP0203 Exported Functions - * @{ - */ - -/*------------------------------------------------------------------------------ - TCPP02/03 Type-C port protection functions -------------------------------------------------------------------------------*/ -/* High Layer codec functions */ -int32_t TCPP0203_RegisterBusIO(TCPP0203_Object_t *pObj, TCPP0203_IO_t *pIO); -int32_t TCPP0203_Init(TCPP0203_Object_t *pObj); -int32_t TCPP0203_DeInit(TCPP0203_Object_t *pObj); -int32_t TCPP0203_Reset(TCPP0203_Object_t *pObj); -int32_t TCPP0203_SetVConnSwitch(TCPP0203_Object_t *pObj, uint8_t VConnSwitch); -int32_t TCPP0203_SetGateDriverProvider(TCPP0203_Object_t *pObj, uint8_t GateDriverProvider); -int32_t TCPP0203_SetGateDriverConsumer(TCPP0203_Object_t *pObj, uint8_t GateDriverConsumer); -int32_t TCPP0203_SetPowerMode(TCPP0203_Object_t *pObj, uint8_t PowerMode); -int32_t TCPP0203_SetVBusDischarge(TCPP0203_Object_t *pObj, uint8_t VBusDischarge); -int32_t TCPP0203_SetVConnDischarge(TCPP0203_Object_t *pObj, uint8_t VConnDischarge); -int32_t TCPP0203_GetVConnSwitchAck(TCPP0203_Object_t *pObj, uint8_t *pVConnSwitchAck); -int32_t TCPP0203_GetGateDriverProviderAck(TCPP0203_Object_t *pObj, uint8_t *pGateDriverProviderAck); -int32_t TCPP0203_GetGateDriverConsumerAck(TCPP0203_Object_t *pObj, uint8_t *pGateDriverConsumerAck); -int32_t TCPP0203_GetPowerModeAck(TCPP0203_Object_t *pObj, uint8_t *pPowerModeAck); -int32_t TCPP0203_GetVBusDischargeAck(TCPP0203_Object_t *pObj, uint8_t *pVBusDischargeAck); -int32_t TCPP0203_GetVConnDischargeAck(TCPP0203_Object_t *pObj, uint8_t *pVConnDischargeAck); -int32_t TCPP0203_GetOCPVConnFlag(TCPP0203_Object_t *pObj, uint8_t *pOCPVConnFlag); -int32_t TCPP0203_GetOCPVBusFlag(TCPP0203_Object_t *pObj, uint8_t *pGetOCPVBusFlag); -int32_t TCPP0203_GetOVPVBusFlag(TCPP0203_Object_t *pObj, uint8_t *pOVPVBusFlag); -int32_t TCPP0203_GetOVPCCFlag(TCPP0203_Object_t *pObj, uint8_t *pOVPCCFlag); -int32_t TCPP0203_GetOTPFlag(TCPP0203_Object_t *pObj, uint8_t *pOTPFlag); -int32_t TCPP0203_GetVBusOkFlag(TCPP0203_Object_t *pObj, uint8_t *pVBusOkFlag); -int32_t TCPP0203_ReadTCPPType(TCPP0203_Object_t *pObj, uint8_t *pTCPPType); -int32_t TCPP0203_ReadVCONNPower(TCPP0203_Object_t *pObj, uint8_t *pVCONNPower); -int32_t TCPP0203_WriteCtrlRegister(TCPP0203_Object_t *pObj, uint8_t *pCtrlRegister); -int32_t TCPP0203_ReadAckRegister(TCPP0203_Object_t *pObj, uint8_t *pAckRegister); -int32_t TCPP0203_ReadFlagRegister(TCPP0203_Object_t *pObj, uint8_t *pFlagRegister); - -/** - * @} - */ - -/* TCPP02/03 Type-C port protection driver structure */ -extern TCPP0203_Drv_t TCPP0203_Driver; - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* TCPP0203_H */ diff --git a/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/tcpp0203_reg.c b/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/tcpp0203_reg.c deleted file mode 100644 index 8025fa85e..000000000 --- a/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/tcpp0203_reg.c +++ /dev/null @@ -1,73 +0,0 @@ -/** - ****************************************************************************** - * @file tcpp0203_reg.c - * @author MCD Application Team - * @brief This file provides unitary register function to control the TCPP02-03 - * Type-C port protection driver. - ****************************************************************************** - * @attention - * - * Copyright (c) 2021 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "tcpp0203_reg.h" - -/** @addtogroup BSP - * @{ - */ - -/** @addtogroup Components - * @{ - */ - -/** @addtogroup TCPP0203 - * @brief This file provides a set of functions needed to drive the - * TCPP02/03 Type-C port protection codec. - * @{ - */ - -/************** Generic Function *******************/ -/******************************************************************************* - * Function Name : tcpp0203_read_reg - * Description : Generic Reading function. It must be fulfilled with either - * I2C or SPI reading functions - * Input : Register Address, length of buffer - * Output : data Read - *******************************************************************************/ -int32_t tcpp0203_read_reg(const TCPP0203_ctx_t *ctx, uint8_t reg, uint8_t *data, uint8_t length) -{ - return ctx->ReadReg(ctx->handle, reg, data, length); -} - -/******************************************************************************* - * Function Name : tcpp0203_write_reg - * Description : Generic Writing function. It must be fulfilled with either - * I2C or SPI writing function - * Input : Register Address, data to be written, length of buffer - * Output : None - *******************************************************************************/ -int32_t tcpp0203_write_reg(const TCPP0203_ctx_t *ctx, uint8_t reg, uint8_t *data, uint8_t length) -{ - return ctx->WriteReg(ctx->handle, reg, data, length); -} - -/******************************************************************************/ -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ diff --git a/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/tcpp0203_reg.h b/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/tcpp0203_reg.h deleted file mode 100644 index 92420e1fe..000000000 --- a/hw/bsp/stm32n6/boards/stm32n657nucleo/tcpp0203/tcpp0203_reg.h +++ /dev/null @@ -1,98 +0,0 @@ -/** - ****************************************************************************** - * @file tcpp0203_reg.h - * @author MCD Application Team - * @brief Header of tcpp0203_reg.c - * - ****************************************************************************** - * @attention - * - * Copyright (c) 2021 STMicroelectronics. - * All rights reserved. - * - * This software is licensed under terms that can be found in the LICENSE file - * in the root directory of this software component. - * If no LICENSE file comes with this software, it is provided AS-IS. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef TCPP0203_REG_H -#define TCPP0203_REG_H - -#include - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -/** @addtogroup BSP - * @{ - */ - -/** @addtogroup Component - * @{ - */ - -/** @addtogroup TCPP0203 - * @{ - */ - - -/** @defgroup TCPP0203_Exported_Constants TCPP0203 Exported Constants - * @{ - */ -/******************************************************************************/ -/****************************** REGISTER MAPPING ******************************/ -/******************************************************************************/ -#define TCPP0203_WRITE_REG 0x00U -#define TCPP0203_PROG_CTRL TCPP0203_WRITE_REG -#define TCPP0203_READ_REG1 0x01U -#define TCPP0203_ACK_REG TCPP0203_READ_REG1 -#define TCPP0203_READ_REG2 0x02U -#define TCPP0203_FLAG_REG TCPP0203_READ_REG2 - -/** - * @} - */ - -/************** Generic Function *******************/ - -typedef int32_t (*TCPP0203_Write_Func)(const void *, uint8_t, uint8_t *, uint8_t); -typedef int32_t (*TCPP0203_Read_Func)(const void *, uint8_t, uint8_t *, uint8_t); - -typedef struct -{ - TCPP0203_Write_Func WriteReg; - TCPP0203_Read_Func ReadReg; - void *handle; -} TCPP0203_ctx_t; - -/******************************************************************************* - * Register : Generic - All - * Address : Generic - All - * Bit Group Name: None - * Permission : W - *******************************************************************************/ -int32_t tcpp0203_write_reg(const TCPP0203_ctx_t *ctx, uint8_t reg, uint8_t *data, uint8_t length); -int32_t tcpp0203_read_reg(const TCPP0203_ctx_t *ctx, uint8_t reg, uint8_t *data, uint8_t length); - -#ifdef __cplusplus -} -#endif - -#endif /* TCPP0203_REG_H */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ diff --git a/hw/bsp/stm32n6/family.cmake b/hw/bsp/stm32n6/family.cmake index c2c634525..76763937e 100644 --- a/hw/bsp/stm32n6/family.cmake +++ b/hw/bsp/stm32n6/family.cmake @@ -6,6 +6,7 @@ set(ST_PREFIX stm32${ST_FAMILY}xx) set(ST_HAL_DRIVER ${TOP}/hw/mcu/st/stm32${ST_FAMILY}xx_hal_driver) set(ST_CMSIS ${TOP}/hw/mcu/st/cmsis_device_${ST_FAMILY}) set(CMSIS_5 ${TOP}/lib/CMSIS_5) +set(ST_TCPP0203 ${TOP}/hw/mcu/st/stm32-tcpp0203) # include board specific include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) diff --git a/hw/bsp/stm32n6/family.mk b/hw/bsp/stm32n6/family.mk index d613e53d2..37087ed42 100644 --- a/hw/bsp/stm32n6/family.mk +++ b/hw/bsp/stm32n6/family.mk @@ -2,6 +2,7 @@ ST_FAMILY = n6 ST_PREFIX = stm32${ST_FAMILY}xx ST_CMSIS = hw/mcu/st/cmsis_device_$(ST_FAMILY) ST_HAL_DRIVER = hw/mcu/st/${ST_PREFIX}_hal_driver +ST_TCPP0203 = hw/mcu/st/stm32-tcpp0203 UF2_FAMILY_ID = 0x6db66083 diff --git a/tools/get_deps.py b/tools/get_deps.py index b2699b88c..6a36ef35d 100755 --- a/tools/get_deps.py +++ b/tools/get_deps.py @@ -133,6 +133,9 @@ deps_optional = { 'hw/mcu/st/stm32-mfxstm32l152': ['https://github.com/STMicroelectronics/stm32-mfxstm32l152.git', '7f4389efee9c6a655b55e5df3fceef5586b35f9b', 'stm32h7'], + 'hw/mcu/st/stm32-tcpp0203': ['https://github.com/STMicroelectronics/stm32-tcpp0203.git', + '9918655bff176ac3046ccf378b5c7bbbc6a38d15', + 'stm32h7rs stm32n6'], 'hw/mcu/st/stm32c0xx_hal_driver': ['https://github.com/STMicroelectronics/stm32c0xx_hal_driver.git', '41253e2f1d7ae4a4d0c379cf63f5bcf71fcf8eb3', 'stm32c0'], -- cgit v1.3.1 From 4579b4f8255a5ed06e276978474fab7c7567445a Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 2 Jul 2025 14:41:16 +0700 Subject: add doc for building examples with cmake build system change ci matrix build: - github build make/cmake one per family on push only - circicle do full cmake build for all toolchain (missing rx-gcc) --- .circleci/config.yml | 9 +++-- .github/workflows/build.yml | 63 ++++++++++++++------------------- docs/reference/getting_started.rst | 72 ++++++++++++++++++++++++++------------ hw/bsp/espressif/family.cmake | 2 -- hw/bsp/espressif/family.mk | 32 ----------------- hw/bsp/msp430/family.cmake | 48 ++++++++++++------------- 6 files changed, 104 insertions(+), 122 deletions(-) delete mode 100644 hw/bsp/espressif/family.mk (limited to '.github') diff --git a/.circleci/config.yml b/.circleci/config.yml index 0b11b50e4..3b4389ab4 100644 --- a/.circleci/config.yml +++ b/.circleci/config.yml @@ -19,13 +19,12 @@ jobs: echo "MATRIX_JSON=$MATRIX_JSON" BUILDSYSTEM_TOOLCHAIN=( + "cmake aarch64-gcc" "cmake arm-clang" + "cmake arm-gcc" "cmake esp-idf" - "make aarch64-gcc" - "make arm-gcc" - "make msp430-gcc" - "make riscv-gcc" - "make rx-gcc" + "cmake msp430-gcc" + "cmake riscv-gcc" ) # only build IAR if not forked PR, since IAR token is not shared diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml index fe2ed61c9..58963013b 100644 --- a/.github/workflows/build.yml +++ b/.github/workflows/build.yml @@ -36,11 +36,6 @@ env: HIL_JSON: test/hil/tinyusb.json jobs: - # --------------------------------------- - # - # Build - # - # --------------------------------------- set-matrix: runs-on: ubuntu-latest outputs: @@ -63,28 +58,31 @@ jobs: echo "hil_matrix=$HIL_MATRIX_JSON" >> $GITHUB_OUTPUT # --------------------------------------- - # Build CMake + # Build CMake: only build on push with one-per-family. + # Full built is done by CircleCI in PR # --------------------------------------- cmake: + if: github.event_name == 'push' needs: set-matrix uses: ./.github/workflows/build_util.yml strategy: fail-fast: false matrix: toolchain: - # - 'arm-clang' is built by circle-ci in PR - 'aarch64-gcc' + - 'arm-clang' - 'arm-gcc' + - 'esp-idf' - 'msp430-gcc' - 'riscv-gcc' with: build-system: 'cmake' toolchain: ${{ matrix.toolchain }} build-args: ${{ toJSON(fromJSON(needs.set-matrix.outputs.json)[matrix.toolchain]) }} - one-per-family: ${{ github.event_name == 'push' }} + one-per-family: true # --------------------------------------- - # Build Make (built by circle-ci in PR, only build on push here) + # Build Make: only build on push with one-per-family # --------------------------------------- make: if: github.event_name == 'push' @@ -94,44 +92,25 @@ jobs: fail-fast: false matrix: toolchain: - # 'arm-clang' - - 'arm-gcc' - 'aarch64-gcc' + - 'arm-clang' + - 'arm-gcc' - 'msp430-gcc' - 'riscv-gcc' - 'rx-gcc' - - 'esp-idf' with: build-system: 'make' toolchain: ${{ matrix.toolchain }} build-args: ${{ toJSON(fromJSON(needs.set-matrix.outputs.json)[matrix.toolchain]) }} one-per-family: true - # --------------------------------------- - # Build Make on Windows/MacOS - # --------------------------------------- - make-os: - if: github.event_name == 'pull_request' - uses: ./.github/workflows/build_util.yml - strategy: - fail-fast: false - matrix: - os: [windows-latest, macos-latest] - with: - os: ${{ matrix.os }} - build-system: 'make' - toolchain: 'arm-gcc' - build-args: '["stm32h7"]' - one-per-family: true - # --------------------------------------- # Build IAR # Since IAR Token secret is not passed to forked PR, only build non-forked PR with make. # cmake is built by circle-ci. Due to IAR limit capacity, only build oe per family # --------------------------------------- arm-iar: - if: false # disable for now since we got reach capacity limit too often - #if: github.event_name == 'push' && github.repository_owner == 'hathach' + if: github.event_name == 'push' && github.repository_owner == 'hathach' needs: set-matrix uses: ./.github/workflows/build_util.yml secrets: inherit @@ -146,6 +125,23 @@ jobs: build-args: ${{ toJSON(fromJSON(needs.set-matrix.outputs.json)['arm-iar']) }} one-per-family: true + # --------------------------------------- + # Build Make on Windows/MacOS + # --------------------------------------- + make-os: + if: github.event_name == 'pull_request' + uses: ./.github/workflows/build_util.yml + strategy: + fail-fast: false + matrix: + os: [windows-latest, macos-latest] + with: + os: ${{ matrix.os }} + build-system: 'make' + toolchain: 'arm-gcc' + build-args: '["stm32h7"]' + one-per-family: true + # --------------------------------------- # Zephyr # --------------------------------------- @@ -168,14 +164,9 @@ jobs: west build -b pca10056 -d examples/device/msc_dual_lun/build examples/device/msc_dual_lun -- -DRTOS=zephyr # --------------------------------------- - # # Hardware in the loop (HIL) # Run on PR only (hil-tinyusb), hil-hfp only run on non-forked PR # --------------------------------------- - - # --------------------------------------- - # Build arm-gcc - # --------------------------------------- hil-build: if: | github.repository_owner == 'hathach' && diff --git a/docs/reference/getting_started.rst b/docs/reference/getting_started.rst index 37745d6a1..ee68f6386 100644 --- a/docs/reference/getting_started.rst +++ b/docs/reference/getting_started.rst @@ -5,12 +5,12 @@ Getting Started Add TinyUSB to your project --------------------------- -It is relatively simple to incorporate tinyusb to your project +To incorporate tinyusb to your project * Copy or ``git submodule`` this repo into your project in a subfolder. Let's say it is ``your_project/tinyusb`` * Add all the ``.c`` in the ``tinyusb/src`` folder to your project * Add ``your_project/tinyusb/src`` to your include path. Also make sure your current include path also contains the configuration file ``tusb_config.h``. -* Make sure all required macros are all defined properly in ``tusb_config.h`` (configure file in demo application is sufficient, but you need to add a few more such as ``CFG_TUSB_MCU``, ``CFG_TUSB_OS`` since they are passed by IDE/compiler to maintain a unique configure for all boards). +* Make sure all required macros are all defined properly in ``tusb_config.h`` (configure file in demo application is sufficient, but you need to add a few more such as ``CFG_TUSB_MCU``, ``CFG_TUSB_OS`` since they are passed by make/cmake to maintain a unique configure for all boards). * If you use the device stack, make sure you have created/modified usb descriptors for your own need. Ultimately you need to implement all **tud descriptor** callbacks for the stack to work. * Add ``tusb_init(rhport, role)`` call to your reset initialization code. * Call ``tusb_int_handler(rhport, in_isr)`` in your USB IRQ Handler @@ -75,24 +75,36 @@ The hardware code is located in ``hw/bsp`` folder, and is organized by family/bo .. code-block:: bash $ cd examples/device/cdc_msc - $ make BOARD=raspberry_pi_pico get-deps + $ make BOARD=feather_nrf52840_express get-deps You only need to do this once per family. Check out `complete list of dependencies and their designated path here `_ -Build -^^^^^ +Build Examples +^^^^^^^^^^^^^^ -To build example, first change directory to an example folder. +Examples support make and cmake build system, though some MCU family such as espressif/rp2040 only support cmake. First change directory to an example folder. .. code-block:: bash $ cd examples/device/cdc_msc -Then compile with ``make BOARD={board_name} all`` , for example +Then compile with make or cmake + +.. code-block:: bash + + $ # make + $ make BOARD=feather_nrf52840_express all + + $ # cmake + $ mkdir build && cd build + $ cmake -DBOARD=raspberry_pi_pico .. + $ make + +To list all available targets with cmake .. code-block:: bash - $ make BOARD=raspberry_pi_pico all + $ cmake --build . --target help Note: some examples especially those that uses Vendor class (e.g webUSB) may requires udev permission on Linux (and/or macOS) to access usb device. It depends on your OS distro, typically copy ``99-tinyusb.rules`` and reload your udev is good to go @@ -104,20 +116,24 @@ Note: some examples especially those that uses Vendor class (e.g webUSB) may req RootHub Port Selection ~~~~~~~~~~~~~~~~~~~~~~ -If a board has several ports, one port is chosen by default in the individual board.mk file. Use option ``PORT=x`` To choose another port. For example to select the HS port of a STM32F746Disco board, use: +If a board has several ports, one port is chosen by default in the individual board.mk file. Use option ``RHPORT_DEVICE=x`` or ``RHPORT_HOST=x`` To choose another port. For example to select the HS port of a STM32F746Disco board, use: .. code-block:: bash - $ make BOARD=stm32f746disco PORT=1 all + $ make BOARD=stm32f746disco RHPORT_DEVICE=1 all + + $ cmake -DBOARD=stm32f746disco -DRHPORT_DEVICE=1 .. Port Speed ~~~~~~~~~~ -A MCU can support multiple operational speed. By default, the example build system will use the fastest supported on the board. Use option ``SPEED=full/high`` e.g To force F723 operate at full instead of default high speed +A MCU can support multiple operational speed. By default, the example build system will use the fastest supported on the board. Use option ``RHPORT_DEVICE_SPEED=OPT_MODE_FULL/HIGH_SPEED/`` or ``RHPORT_HOST_SPEED=OPT_MODE_FULL/HIGH_SPEED/`` e.g To force F723 operate at full instead of default high speed .. code-block:: bash - $ make BOARD=stm32f746disco SPEED=full all + $ make BOARD=stm32f746disco RHPORT_DEVICE_SPEED=OPT_MODE_FULL_SPEED all + + $ cmake -DBOARD=stm32f746disco -DRHPORT_DEVICE_SPEED=OPT_MODE_FULL_SPEED .. Size Analysis ~~~~~~~~~~~~~ @@ -137,6 +153,8 @@ To compile for debugging add ``DEBUG=1``\ , for example $ make BOARD=feather_nrf52840_express DEBUG=1 all + $ cmake -DBOARD=feather_nrf52840_express -DCMAKE_BUILD_TYPE=Debug .. + Log ~~~ @@ -146,6 +164,8 @@ Should you have an issue running example and/or submitting an bug report. You co $ make BOARD=feather_nrf52840_express LOG=2 all + $ cmake -DBOARD=feather_nrf52840_express -DLOG=2 .. + Logger ~~~~~~ @@ -169,6 +189,9 @@ By default log message is printed via on-board UART which is slow and take lots $ make BOARD=feather_nrf52840_express LOG=2 LOGGER=rtt all $ make BOARD=feather_nrf52840_express LOG=2 LOGGER=swo all + $ cmake -DBOARD=feather_nrf52840_express -DLOG=2 -DLOGGER=rtt .. + $ cmake -DBOARD=feather_nrf52840_express -DLOG=2 -DLOGGER=swo .. + Flash ^^^^^ @@ -179,11 +202,15 @@ Flash $ make BOARD=feather_nrf52840_express flash $ make SERIAL=/dev/ttyACM0 BOARD=feather_nrf52840_express flash -Since jlink can be used with most of the boards, there is also ``flash-jlink`` target for your convenience. +Since jlink/openocd can be used with most of the boards, there is also ``flash-jlink/openocd`` (make) and ``EXAMPLE-jlink/openocd`` target for your convenience. Note for stm32 board with stlink, you can use ``flash-stlink`` target as well. .. code-block:: bash $ make BOARD=feather_nrf52840_express flash-jlink + $ make BOARD=feather_nrf52840_express flash-openocd + + $ cmake --build . --target cdc_msc-jlink + $ cmake --build . --target cdc_msc-openocd Some board use uf2 bootloader for drag & drop in to mass storage device, uf2 can be generated with ``uf2`` target @@ -191,17 +218,18 @@ Some board use uf2 bootloader for drag & drop in to mass storage device, uf2 can $ make BOARD=feather_nrf52840_express all uf2 + $ cmake --build . --target cdc_msc-uf2 + IAR Support ------------ +^^^^^^^^^^^ Use project connection -^^^^^^^^^^^^^^^^^^^^^^ +~~~~~~~~~~~~~~~~~~~~~~ IAR Project Connection files are provided to import TinyUSB stack into your project. * A buildable project of your MCU need to be created in advance. - * Take example of STM32F0: - You need ``stm32l0xx.h``, ``startup_stm32f0xx.s``, ``system_stm32f0xx.c``. @@ -212,15 +240,13 @@ IAR Project Connection files are provided to import TinyUSB stack into your proj Click ``New Group ...``, name it to ``TUSB``, Click ``Add Variable ...``, name it to ``TUSB_DIR``, change it's value to the path of your TinyUSB stack, for example ``C:\\tinyusb`` -Import stack only -~~~~~~~~~~~~~~~~~ +**Import stack only** -1. Open ``Project -> Add project Connection ...``, click ``OK``, choose ``tinyusb\\tools\\iar_template.ipcf``. +Open ``Project -> Add project Connection ...``, click ``OK``, choose ``tinyusb\\tools\\iar_template.ipcf``. -Run examples -~~~~~~~~~~~~ +**Run examples** -1. (Python3 is needed) Run ``iar_gen.py`` to generate .ipcf files of examples: +1. Run ``iar_gen.py`` to generate .ipcf files of examples: .. code-block:: @@ -231,7 +257,7 @@ Run examples For example ``C:\\tinyusb\\examples\\device\\cdc_msc\\iar_cdc_msc.ipcf`` Native CMake support (9.50.1+) -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ With 9.50.1 release, IAR added experimental native CMake support (strangely not mentioned in public release note). Now it's possible to import CMakeLists.txt then build and debug as a normal project. diff --git a/hw/bsp/espressif/family.cmake b/hw/bsp/espressif/family.cmake index 2aad7d185..ca9eadaf6 100644 --- a/hw/bsp/espressif/family.cmake +++ b/hw/bsp/espressif/family.cmake @@ -1,5 +1,3 @@ -cmake_minimum_required(VERSION 3.5) - # Apply board specific content i.e IDF_TARGET must be set before project.cmake is included include("${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake") string(TOUPPER ${IDF_TARGET} FAMILY_MCUS) diff --git a/hw/bsp/espressif/family.mk b/hw/bsp/espressif/family.mk deleted file mode 100644 index d955a2b4c..000000000 --- a/hw/bsp/espressif/family.mk +++ /dev/null @@ -1,32 +0,0 @@ -UF2_FAMILY_ID_esp32s2 = 0xbfdd4eee -UF2_FAMILY_ID_esp32s3 = 0xc47e5767 - -BOARD_CMAKE := $(file < $(TOP)/$(BOARD_PATH)/board.cmake) -ifneq ($(findstring esp32s2,$(BOARD_CMAKE)),) - IDF_TARGET = esp32s2 -else -ifneq ($(findstring esp32s3,$(BOARD_CMAKE)),) - IDF_TARGET = esp32s3 -endif -endif - -.PHONY: all clean flash bootloader-flash app-flash erase monitor dfu-flash dfu - -all: - idf.py -B$(BUILD) -DFAMILY=$(FAMILY) -DBOARD=$(BOARD) $(CMAKE_DEFSYM) build - -build: all - -fullclean: - if test -f sdkconfig; then $(RM) -f sdkconfig ; fi - if test -d $(BUILD); then $(RM) -rf $(BUILD) ; fi - idf.py -B$(BUILD) -DFAMILY=$(FAMILY) -DBOARD=$(BOARD) $(CMAKE_DEFSYM) $@ - -clean flash bootloader-flash app-flash erase monitor dfu-flash dfu size size-components size-files: - idf.py -B$(BUILD) -DFAMILY=$(FAMILY) -DBOARD=$(BOARD) $(CMAKE_DEFSYM) $@ - -uf2: $(BUILD)/$(PROJECT).uf2 - -$(BUILD)/$(PROJECT).uf2: $(BUILD)/$(PROJECT).bin - @echo CREATE $@ - $(PYTHON) $(TOP)/tools/uf2/utils/uf2conv.py -f $(UF2_FAMILY_ID_$(IDF_TARGET)) -b 0x0 -c -o $@ $^ diff --git a/hw/bsp/msp430/family.cmake b/hw/bsp/msp430/family.cmake index ddd54b675..d9b4bf770 100644 --- a/hw/bsp/msp430/family.cmake +++ b/hw/bsp/msp430/family.cmake @@ -11,36 +11,37 @@ set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/msp430_${T set(FAMILY_MCUS MSP430x5xx CACHE INTERNAL "") - #------------------------------------ # BOARD_TARGET #------------------------------------ # only need to be built ONCE for all examples function(add_board_target BOARD_TARGET) - if (NOT TARGET ${BOARD_TARGET}) - add_library(${BOARD_TARGET} INTERFACE) - target_compile_definitions(${BOARD_TARGET} INTERFACE - CFG_TUD_ENDPOINT0_SIZE=8 - CFG_EXAMPLE_VIDEO_READONLY - CFG_EXAMPLE_MSC_READONLY - ) - target_include_directories(${BOARD_TARGET} INTERFACE - ${CMAKE_CURRENT_FUNCTION_LIST_DIR} - ${SDK_DIR} - ) + if (TARGET ${BOARD_TARGET}) + return() + endif () - update_board(${BOARD_TARGET}) + add_library(${BOARD_TARGET} INTERFACE) + target_compile_definitions(${BOARD_TARGET} INTERFACE + CFG_TUD_ENDPOINT0_SIZE=8 + CFG_EXAMPLE_VIDEO_READONLY + CFG_EXAMPLE_MSC_READONLY + ) + target_include_directories(${BOARD_TARGET} INTERFACE + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${SDK_DIR} + ) + + update_board(${BOARD_TARGET}) - if (CMAKE_C_COMPILER_ID STREQUAL "GNU") - target_link_options(${BOARD_TARGET} INTERFACE - "LINKER:--script=${LD_FILE_GNU}" - -L${SDK_DIR} - ) - elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") - target_link_options(${BOARD_TARGET} INTERFACE - "LINKER:--config=${LD_FILE_IAR}" - ) - endif () + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${BOARD_TARGET} INTERFACE + "LINKER:--script=${LD_FILE_GNU}" + -L${SDK_DIR} + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${BOARD_TARGET} INTERFACE + "LINKER:--config=${LD_FILE_IAR}" + ) endif () endfunction() @@ -75,7 +76,6 @@ function(family_configure_example TARGET RTOS) ) target_link_libraries(${TARGET} PUBLIC board_${BOARD}) - # Flashing family_add_bin_hex(${TARGET}) family_flash_msp430flasher(${TARGET}) -- cgit v1.3.1 From 0388700ad7c0fc8565457a56d7e7bd5744ac0d1d Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 2 Jul 2025 15:32:12 +0700 Subject: update esp build, replace TUSB_MCU_VENDOR_ESPRESSIF by ESP_PLATFORM --- .github/workflows/build.yml | 2 +- examples/device/audio_4_channel_mic_freertos/src/main.c | 11 +++++------ .../device/audio_4_channel_mic_freertos/src/tusb_config.h | 2 +- examples/device/audio_test_freertos/src/main.c | 8 ++++---- examples/device/audio_test_freertos/src/tusb_config.h | 2 +- examples/device/board_test/src/tusb_config.h | 2 +- examples/device/cdc_msc_freertos/src/main.c | 8 ++++---- examples/device/cdc_msc_freertos/src/tusb_config.h | 2 +- examples/device/hid_composite_freertos/src/main.c | 11 +++++------ examples/device/hid_composite_freertos/src/tusb_config.h | 2 +- examples/device/midi_test_freertos/src/main.c | 8 ++++---- examples/device/video_capture/src/main.c | 6 +++--- examples/device/video_capture/src/tusb_config.h | 2 +- examples/device/video_capture_2ch/src/main.c | 6 +++--- examples/device/video_capture_2ch/src/tusb_config.h | 2 +- examples/host/cdc_msc_hid_freertos/src/cdc_app.c | 2 +- examples/host/cdc_msc_hid_freertos/src/main.c | 8 ++++---- examples/host/cdc_msc_hid_freertos/src/tusb_config.h | 2 +- examples/host/device_info/src/main.c | 8 ++++---- examples/host/device_info/src/tusb_config.h | 2 +- examples/host/midi_rx/src/tusb_config.h | 2 +- examples/typec/power_delivery/src/main.c | 5 ++--- hw/bsp/board.c | 7 ++++--- hw/bsp/board_api.h | 3 ++- hw/bsp/espressif/boards/family.c | 4 ++++ tools/build.py | 6 ++---- tools/build_utils.py | 2 ++ 27 files changed, 64 insertions(+), 61 deletions(-) (limited to '.github') diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml index 58963013b..97f219e6f 100644 --- a/.github/workflows/build.yml +++ b/.github/workflows/build.yml @@ -93,7 +93,7 @@ jobs: matrix: toolchain: - 'aarch64-gcc' - - 'arm-clang' + #- 'arm-clang' - 'arm-gcc' - 'msp430-gcc' - 'riscv-gcc' diff --git a/examples/device/audio_4_channel_mic_freertos/src/main.c b/examples/device/audio_4_channel_mic_freertos/src/main.c index 99278b5cc..d5a34b194 100644 --- a/examples/device/audio_4_channel_mic_freertos/src/main.c +++ b/examples/device/audio_4_channel_mic_freertos/src/main.c @@ -39,7 +39,7 @@ #include "bsp/board_api.h" #include "tusb.h" -#if TUSB_MCU_VENDOR_ESPRESSIF +#ifdef ESP_PLATFORM // ESP-IDF need "freertos/" prefix in include path. // CFG_TUSB_OS_INC_PATH should be defined accordingly. #include "freertos/FreeRTOS.h" @@ -158,17 +158,16 @@ int main(void) xTaskCreate(audio_task, "audio", AUDIO_STACK_SIZE, NULL, configMAX_PRIORITIES - 1, NULL); #endif - // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3 - #if !TUSB_MCU_VENDOR_ESPRESSIF + // only start scheduler for non-espressif mcu + #ifndef ESP_PLATFORM vTaskStartScheduler(); #endif return 0; } -#if TUSB_MCU_VENDOR_ESPRESSIF -void app_main(void) -{ +#ifdef ESP_PLATFORM +void app_main(void) { main(); } #endif diff --git a/examples/device/audio_4_channel_mic_freertos/src/tusb_config.h b/examples/device/audio_4_channel_mic_freertos/src/tusb_config.h index 5ac51b153..f7c0efe08 100644 --- a/examples/device/audio_4_channel_mic_freertos/src/tusb_config.h +++ b/examples/device/audio_4_channel_mic_freertos/src/tusb_config.h @@ -59,7 +59,7 @@ extern "C" { #endif // Espressif IDF requires "freertos/" prefix in include path -#if TUSB_MCU_VENDOR_ESPRESSIF +#ifdef ESP_PLATFORM #define CFG_TUSB_OS_INC_PATH freertos/ #endif diff --git a/examples/device/audio_test_freertos/src/main.c b/examples/device/audio_test_freertos/src/main.c index c5143c3fc..3831be87f 100644 --- a/examples/device/audio_test_freertos/src/main.c +++ b/examples/device/audio_test_freertos/src/main.c @@ -38,7 +38,7 @@ #include "bsp/board_api.h" #include "tusb.h" -#if TUSB_MCU_VENDOR_ESPRESSIF +#ifdef ESP_PLATFORM // ESP-IDF need "freertos/" prefix in include path. // CFG_TUSB_OS_INC_PATH should be defined accordingly. #include "freertos/FreeRTOS.h" @@ -132,15 +132,15 @@ int main(void) xTaskCreate(usb_device_task, "usbd", USBD_STACK_SIZE, NULL, configMAX_PRIORITIES - 1, NULL); #endif - // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3 - #if !TUSB_MCU_VENDOR_ESPRESSIF + // only start scheduler for non-espressif mcu + #ifndef ESP_PLATFORM vTaskStartScheduler(); #endif return 0; } -#if TUSB_MCU_VENDOR_ESPRESSIF +#ifdef ESP_PLATFORM void app_main(void) { main(); } diff --git a/examples/device/audio_test_freertos/src/tusb_config.h b/examples/device/audio_test_freertos/src/tusb_config.h index 61c5cbb96..0fb2106e2 100644 --- a/examples/device/audio_test_freertos/src/tusb_config.h +++ b/examples/device/audio_test_freertos/src/tusb_config.h @@ -59,7 +59,7 @@ extern "C" { #endif // Espressif IDF requires "freertos/" prefix in include path -#if TUSB_MCU_VENDOR_ESPRESSIF +#ifdef ESP_PLATFORM #define CFG_TUSB_OS_INC_PATH freertos/ #endif diff --git a/examples/device/board_test/src/tusb_config.h b/examples/device/board_test/src/tusb_config.h index 8ac3bc8de..81829d450 100644 --- a/examples/device/board_test/src/tusb_config.h +++ b/examples/device/board_test/src/tusb_config.h @@ -44,7 +44,7 @@ #endif // Espressif IDF requires "freertos/" prefix in include path -#if TUSB_MCU_VENDOR_ESPRESSIF +#ifdef ESP_PLATFORM #define CFG_TUSB_OS_INC_PATH freertos/ #endif diff --git a/examples/device/cdc_msc_freertos/src/main.c b/examples/device/cdc_msc_freertos/src/main.c index 4dada9801..6fe964153 100644 --- a/examples/device/cdc_msc_freertos/src/main.c +++ b/examples/device/cdc_msc_freertos/src/main.c @@ -30,7 +30,7 @@ #include "bsp/board_api.h" #include "tusb.h" -#if TUSB_MCU_VENDOR_ESPRESSIF +#ifdef ESP_PLATFORM #define USBD_STACK_SIZE 4096 #else // Increase stack size when debug log is enabled @@ -91,15 +91,15 @@ int main(void) { xTaskCreate(cdc_task, "cdc", CDC_STACK_SZIE, NULL, configMAX_PRIORITIES - 2, NULL); #endif -#if !TUSB_MCU_VENDOR_ESPRESSIF - // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3 +#ifndef ESP_PLATFORM + // only start scheduler for non-espressif mcu vTaskStartScheduler(); #endif return 0; } -#if TUSB_MCU_VENDOR_ESPRESSIF +#ifdef ESP_PLATFORM void app_main(void) { main(); } diff --git a/examples/device/cdc_msc_freertos/src/tusb_config.h b/examples/device/cdc_msc_freertos/src/tusb_config.h index c3f2f7fb5..71a0e985a 100644 --- a/examples/device/cdc_msc_freertos/src/tusb_config.h +++ b/examples/device/cdc_msc_freertos/src/tusb_config.h @@ -59,7 +59,7 @@ #endif // Espressif IDF requires "freertos/" prefix in include path -#if TUSB_MCU_VENDOR_ESPRESSIF +#ifdef ESP_PLATFORM #define CFG_TUSB_OS_INC_PATH freertos/ #endif diff --git a/examples/device/hid_composite_freertos/src/main.c b/examples/device/hid_composite_freertos/src/main.c index 30c0331ef..3f5e8a91c 100644 --- a/examples/device/hid_composite_freertos/src/main.c +++ b/examples/device/hid_composite_freertos/src/main.c @@ -31,7 +31,7 @@ #include "tusb.h" #include "usb_descriptors.h" -#if TUSB_MCU_VENDOR_ESPRESSIF +#ifdef ESP_PLATFORM // ESP-IDF need "freertos/" prefix in include path. // CFG_TUSB_OS_INC_PATH should be defined accordingly. #include "freertos/FreeRTOS.h" @@ -112,17 +112,16 @@ int main(void) xTimerStart(blinky_tm, 0); - // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3 -#if !TUSB_MCU_VENDOR_ESPRESSIF + // only start scheduler for non-espressif mcu +#ifndef ESP_PLATFORM vTaskStartScheduler(); #endif return 0; } -#if TUSB_MCU_VENDOR_ESPRESSIF -void app_main(void) -{ +#ifdef ESP_PLATFORM +void app_main(void) { main(); } #endif diff --git a/examples/device/hid_composite_freertos/src/tusb_config.h b/examples/device/hid_composite_freertos/src/tusb_config.h index 6ec38b95c..b28033a0c 100644 --- a/examples/device/hid_composite_freertos/src/tusb_config.h +++ b/examples/device/hid_composite_freertos/src/tusb_config.h @@ -59,7 +59,7 @@ #endif // Espressif IDF requires "freertos/" prefix in include path -#if TUSB_MCU_VENDOR_ESPRESSIF +#ifdef ESP_PLATFORM #define CFG_TUSB_OS_INC_PATH freertos/ #endif diff --git a/examples/device/midi_test_freertos/src/main.c b/examples/device/midi_test_freertos/src/main.c index dbe89080c..3e406d38d 100644 --- a/examples/device/midi_test_freertos/src/main.c +++ b/examples/device/midi_test_freertos/src/main.c @@ -40,7 +40,7 @@ //--------------------------------------------------------------------+ // MACRO CONSTANT TYPEDEF PROTYPES //--------------------------------------------------------------------+ -#if TUSB_MCU_VENDOR_ESPRESSIF +#ifdef ESP_PLATFORM #define USBD_STACK_SIZE 4096 #else // Increase stack size when debug log is enabled @@ -95,15 +95,15 @@ int main(void) { xTaskCreate(midi_task, "midi", MIDI_STACK_SIZE, NULL, configMAX_PRIORITIES - 2, NULL); #endif -#if !TUSB_MCU_VENDOR_ESPRESSIF - // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3 +#ifndef ESP_PLATFORM + // only start scheduler for non-espressif mcu vTaskStartScheduler(); #endif return 0; } -#if TUSB_MCU_VENDOR_ESPRESSIF +#ifdef ESP_PLATFORM void app_main(void) { main(); } diff --git a/examples/device/video_capture/src/main.c b/examples/device/video_capture/src/main.c index 04d4af4e5..0406279fd 100644 --- a/examples/device/video_capture/src/main.c +++ b/examples/device/video_capture/src/main.c @@ -292,7 +292,7 @@ void led_blinking_task(void* param) { #define BLINKY_STACK_SIZE configMINIMAL_STACK_SIZE #define VIDEO_STACK_SIZE (configMINIMAL_STACK_SIZE*4) -#if TUSB_MCU_VENDOR_ESPRESSIF +#ifdef ESP_PLATFORM #define USBD_STACK_SIZE 4096 int main(void); void app_main(void) { @@ -351,8 +351,8 @@ void freertos_init_task(void) { xTaskCreate(video_task, "video", VIDEO_STACK_SZIE, NULL, configMAX_PRIORITIES - 2, NULL); #endif - // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3 - #if !TUSB_MCU_VENDOR_ESPRESSIF + // only start scheduler for non-espressif mcu + #ifndef ESP_PLATFORM vTaskStartScheduler(); #endif } diff --git a/examples/device/video_capture/src/tusb_config.h b/examples/device/video_capture/src/tusb_config.h index 6dbd6f2a5..4ba86ca65 100644 --- a/examples/device/video_capture/src/tusb_config.h +++ b/examples/device/video_capture/src/tusb_config.h @@ -58,7 +58,7 @@ #endif // Espressif IDF requires "freertos/" prefix in include path -#if TUSB_MCU_VENDOR_ESPRESSIF +#ifdef ESP_PLATFORM #define CFG_TUSB_OS_INC_PATH freertos/ #endif diff --git a/examples/device/video_capture_2ch/src/main.c b/examples/device/video_capture_2ch/src/main.c index 245e7abb8..dc616e3fa 100644 --- a/examples/device/video_capture_2ch/src/main.c +++ b/examples/device/video_capture_2ch/src/main.c @@ -300,7 +300,7 @@ void led_blinking_task(void* param) { #define BLINKY_STACK_SIZE configMINIMAL_STACK_SIZE #define VIDEO_STACK_SIZE (configMINIMAL_STACK_SIZE*4) -#if TUSB_MCU_VENDOR_ESPRESSIF +#ifdef ESP_PLATFORM #define USBD_STACK_SIZE 4096 int main(void); void app_main(void) { @@ -359,8 +359,8 @@ void freertos_init_task(void) { xTaskCreate(video_task, "video", VIDEO_STACK_SZIE, NULL, configMAX_PRIORITIES - 2, NULL); #endif - // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3 - #if !TUSB_MCU_VENDOR_ESPRESSIF + // only start scheduler for non-espressif mcu + #ifndef ESP_PLATFORM vTaskStartScheduler(); #endif } diff --git a/examples/device/video_capture_2ch/src/tusb_config.h b/examples/device/video_capture_2ch/src/tusb_config.h index 91775a327..e84e49879 100644 --- a/examples/device/video_capture_2ch/src/tusb_config.h +++ b/examples/device/video_capture_2ch/src/tusb_config.h @@ -58,7 +58,7 @@ #endif // Espressif IDF requires "freertos/" prefix in include path -#if TUSB_MCU_VENDOR_ESPRESSIF +#ifdef ESP_PLATFORM #define CFG_TUSB_OS_INC_PATH freertos/ #endif diff --git a/examples/host/cdc_msc_hid_freertos/src/cdc_app.c b/examples/host/cdc_msc_hid_freertos/src/cdc_app.c index e279ad509..d99760a02 100644 --- a/examples/host/cdc_msc_hid_freertos/src/cdc_app.c +++ b/examples/host/cdc_msc_hid_freertos/src/cdc_app.c @@ -27,7 +27,7 @@ #include "tusb.h" #include "bsp/board_api.h" -#if TUSB_MCU_VENDOR_ESPRESSIF +#ifdef ESP_PLATFORM #define CDC_STACK_SZIE 2048 #else #define CDC_STACK_SZIE (3*configMINIMAL_STACK_SIZE/2) diff --git a/examples/host/cdc_msc_hid_freertos/src/main.c b/examples/host/cdc_msc_hid_freertos/src/main.c index 64a108254..0bcb355ec 100644 --- a/examples/host/cdc_msc_hid_freertos/src/main.c +++ b/examples/host/cdc_msc_hid_freertos/src/main.c @@ -30,7 +30,7 @@ #include "bsp/board_api.h" #include "tusb.h" -#if TUSB_MCU_VENDOR_ESPRESSIF +#ifdef ESP_PLATFORM #define USBH_STACK_SIZE 4096 #else // Increase stack size when debug log is enabled @@ -86,15 +86,15 @@ int main(void) { xTimerStart(blinky_tm, 0); - // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3 -#if !TUSB_MCU_VENDOR_ESPRESSIF + // only start scheduler for non-espressif mcu +#ifndef ESP_PLATFORM vTaskStartScheduler(); #endif return 0; } -#if TUSB_MCU_VENDOR_ESPRESSIF +#ifdef ESP_PLATFORM void app_main(void) { main(); } diff --git a/examples/host/cdc_msc_hid_freertos/src/tusb_config.h b/examples/host/cdc_msc_hid_freertos/src/tusb_config.h index bc8887211..3cdb227e2 100644 --- a/examples/host/cdc_msc_hid_freertos/src/tusb_config.h +++ b/examples/host/cdc_msc_hid_freertos/src/tusb_config.h @@ -44,7 +44,7 @@ #endif // Espressif IDF requires "freertos/" prefix in include path -#if TUSB_MCU_VENDOR_ESPRESSIF +#ifdef ESP_PLATFORM #define CFG_TUSB_OS_INC_PATH freertos/ #endif diff --git a/examples/host/device_info/src/main.c b/examples/host/device_info/src/main.c index e924a137b..7189972d6 100644 --- a/examples/host/device_info/src/main.c +++ b/examples/host/device_info/src/main.c @@ -268,7 +268,7 @@ void led_blinking_task(void* param) { #define BLINKY_STACK_SIZE configMINIMAL_STACK_SIZE -#if TUSB_MCU_VENDOR_ESPRESSIF +#ifdef ESP_PLATFORM #define USB_STACK_SIZE 4096 #else // Increase stack size when debug log is enabled @@ -285,7 +285,7 @@ StackType_t usb_stack[USB_STACK_SIZE]; StaticTask_t usb_taskdef; #endif -#if TUSB_MCU_VENDOR_ESPRESSIF +#ifdef ESP_PLATFORM void app_main(void) { main(); } @@ -308,8 +308,8 @@ void init_freertos_task(void) { xTaskCreate(usb_host_task, "usbh", USB_STACK_SIZE, NULL, configMAX_PRIORITIES - 1, NULL); #endif - // skip starting scheduler (and return) for ESP32-S2 or ESP32-S3 -#if !TUSB_MCU_VENDOR_ESPRESSIF + // only start scheduler for non-espressif mcu +#ifndef ESP_PLATFORM vTaskStartScheduler(); #endif } diff --git a/examples/host/device_info/src/tusb_config.h b/examples/host/device_info/src/tusb_config.h index e12970c12..e4ca2528e 100644 --- a/examples/host/device_info/src/tusb_config.h +++ b/examples/host/device_info/src/tusb_config.h @@ -40,7 +40,7 @@ #endif // Espressif IDF requires "freertos/" prefix in include path -#if TUSB_MCU_VENDOR_ESPRESSIF +#ifdef ESP_PLATFORM #define CFG_TUSB_OS_INC_PATH freertos/ #endif diff --git a/examples/host/midi_rx/src/tusb_config.h b/examples/host/midi_rx/src/tusb_config.h index c9b430388..76bdf87f3 100644 --- a/examples/host/midi_rx/src/tusb_config.h +++ b/examples/host/midi_rx/src/tusb_config.h @@ -40,7 +40,7 @@ extern "C" { #endif // Espressif IDF requires "freertos/" prefix in include path -#if TUSB_MCU_VENDOR_ESPRESSIF +#ifdef ESP_PLATFORM #define CFG_TUSB_OS_INC_PATH freertos/ #endif diff --git a/examples/typec/power_delivery/src/main.c b/examples/typec/power_delivery/src/main.c index 068dbbeb1..de0db4721 100644 --- a/examples/typec/power_delivery/src/main.c +++ b/examples/typec/power_delivery/src/main.c @@ -71,9 +71,8 @@ int main(void) } } -#if TUSB_MCU_VENDOR_ESPRESSIF -void app_main(void) -{ +#ifdef ESP_PLATFORM +void app_main(void) { main(); } #endif diff --git a/hw/bsp/board.c b/hw/bsp/board.c index 4b8e5950f..8f2f93306 100644 --- a/hw/bsp/board.c +++ b/hw/bsp/board.c @@ -66,7 +66,6 @@ int sys_read(int fhdl, char *buf, size_t count) { #elif defined(LOGGER_SWO) #define ITM_BASE 0xE0000000 - #define ITM_STIM0 (*((volatile uint8_t*)(ITM_BASE + 0))) #define ITM_TER *((volatile uint32_t*)(ITM_BASE + 0xE00)) #define ITM_TCR *((volatile uint32_t*)(ITM_BASE + 0xE80)) @@ -150,6 +149,9 @@ int board_getchar(void) { return (sys_read(0, &c, 1) > 0) ? (int) c : (-1); } +void board_putchar(int c) { + sys_write(0, (const char*)&c, 1); +} uint32_t tusb_time_millis_api(void) { return board_millis(); @@ -158,7 +160,7 @@ uint32_t tusb_time_millis_api(void) { //-------------------------------------------------------------------- // FreeRTOS hooks //-------------------------------------------------------------------- -#if CFG_TUSB_OS == OPT_OS_FREERTOS && !TUSB_MCU_VENDOR_ESPRESSIF +#if CFG_TUSB_OS == OPT_OS_FREERTOS && !defined(ESP_PLATFORM) #include "FreeRTOS.h" #include "task.h" @@ -240,5 +242,4 @@ void vApplicationSetupTimerInterrupt(void) { } #endif - #endif diff --git a/hw/bsp/board_api.h b/hw/bsp/board_api.h index 9cdbbf0d3..328fe9363 100644 --- a/hw/bsp/board_api.h +++ b/hw/bsp/board_api.h @@ -41,7 +41,7 @@ extern "C" { #if CFG_TUSB_OS == OPT_OS_ZEPHYR #include #elif CFG_TUSB_OS == OPT_OS_FREERTOS - #if TUSB_MCU_VENDOR_ESPRESSIF + #ifdef ESP_PLATFORM // ESP-IDF need "freertos/" prefix in include path. // CFG_TUSB_OS_INC_PATH should be defined accordingly. #include "freertos/FreeRTOS.h" @@ -195,6 +195,7 @@ static inline void board_delay(uint32_t ms) { // stdio getchar() is blocking, this is non-blocking version int board_getchar(void); +void board_putchar(int c); #ifdef __cplusplus } diff --git a/hw/bsp/espressif/boards/family.c b/hw/bsp/espressif/boards/family.c index 8f6c4bee2..2a5deed26 100644 --- a/hw/bsp/espressif/boards/family.c +++ b/hw/bsp/espressif/boards/family.c @@ -156,6 +156,10 @@ int board_getchar(void) { return getchar(); } +void board_putchar(int c) { + putchar(c); +} + //-------------------------------------------------------------------- // PHY Init //-------------------------------------------------------------------- diff --git a/tools/build.py b/tools/build.py index 6e73681fe..eaa383d73 100755 --- a/tools/build.py +++ b/tools/build.py @@ -101,10 +101,8 @@ def cmake_board(board, toolchain, build_flags_on): if build_utils.skip_example(example, board): ret[2] += 1 else: - rcmd = run_cmd(f'cmake examples/{example} -B {build_dir}/{example} -G Ninja ' - f'-DBOARD={board} {build_flags}') - if rcmd.returncode == 0: - rcmd = run_cmd(f'cmake --build {build_dir}/{example}') + rcmd = run_cmd(f'idf.py -C examples/{example} -B {build_dir}/{example} -G Ninja ' + f'-DBOARD={board} {build_flags} build') ret[0 if rcmd.returncode == 0 else 1] += 1 else: rcmd = run_cmd(f'cmake examples -B {build_dir} -G Ninja -DBOARD={board} -DCMAKE_BUILD_TYPE=MinSizeRel ' diff --git a/tools/build_utils.py b/tools/build_utils.py index 2998f940d..d80ceea7c 100755 --- a/tools/build_utils.py +++ b/tools/build_utils.py @@ -26,6 +26,8 @@ def skip_example(example, board): # family.mk family_mk = family_dir / "family.mk" + if not family_mk.exists(): + family_mk = family_dir / "family.cmake" mk_contents = family_mk.read_text() # Find the mcu, first in family mk then board mk -- cgit v1.3.1 From 014d6b2f2647b5135e22d219b61b727cb9a20ae6 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 2 Jul 2025 15:55:42 +0700 Subject: remove cmake arm-clang and make iar to reduce concurrent jobs --- .github/workflows/build.yml | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to '.github') diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml index 97f219e6f..5e11f8a29 100644 --- a/.github/workflows/build.yml +++ b/.github/workflows/build.yml @@ -70,7 +70,7 @@ jobs: matrix: toolchain: - 'aarch64-gcc' - - 'arm-clang' + #- 'arm-clang' - 'arm-gcc' - 'esp-idf' - 'msp430-gcc' @@ -110,7 +110,8 @@ jobs: # cmake is built by circle-ci. Due to IAR limit capacity, only build oe per family # --------------------------------------- arm-iar: - if: github.event_name == 'push' && github.repository_owner == 'hathach' + if: false # disable for now since we got reach capacity limit too often + #if: github.event_name == 'push' && github.repository_owner == 'hathach' needs: set-matrix uses: ./.github/workflows/build_util.yml secrets: inherit -- cgit v1.3.1