From 143987702e8bf10bda12c2759a6f55de6963da90 Mon Sep 17 00:00:00 2001 From: HiFiPhile Date: Thu, 11 Dec 2025 21:51:45 +0100 Subject: bsp/mcx to new sdk repo Signed-off-by: HiFiPhile --- hw/bsp/mcx/boards/frdm_mcxa153/board.cmake | 7 +- hw/bsp/mcx/boards/frdm_mcxa153/board.mk | 7 +- .../mcx/boards/frdm_mcxa153/board/clock_config.c | 559 --------------------- .../mcx/boards/frdm_mcxa153/board/clock_config.h | 385 -------------- hw/bsp/mcx/boards/frdm_mcxa153/board/pin_mux.c | 492 ------------------ hw/bsp/mcx/boards/frdm_mcxa153/board/pin_mux.h | 211 -------- hw/bsp/mcx/boards/frdm_mcxa153/clock_config.c | 559 +++++++++++++++++++++ hw/bsp/mcx/boards/frdm_mcxa153/clock_config.h | 385 ++++++++++++++ hw/bsp/mcx/boards/frdm_mcxa153/pin_mux.c | 492 ++++++++++++++++++ hw/bsp/mcx/boards/frdm_mcxa153/pin_mux.h | 211 ++++++++ hw/bsp/mcx/boards/frdm_mcxa156/board.cmake | 4 + hw/bsp/mcx/boards/frdm_mcxa156/board.mk | 4 + hw/bsp/mcx/boards/frdm_mcxn947/board.cmake | 4 + hw/bsp/mcx/boards/frdm_mcxn947/board.mk | 4 + hw/bsp/mcx/boards/mcxn947brk/board.cmake | 4 + hw/bsp/mcx/boards/mcxn947brk/board.mk | 4 + hw/bsp/mcx/family.cmake | 51 +- hw/bsp/mcx/family.mk | 45 +- tools/get_deps.py | 11 +- 19 files changed, 1743 insertions(+), 1696 deletions(-) delete mode 100644 hw/bsp/mcx/boards/frdm_mcxa153/board/clock_config.c delete mode 100644 hw/bsp/mcx/boards/frdm_mcxa153/board/clock_config.h delete mode 100644 hw/bsp/mcx/boards/frdm_mcxa153/board/pin_mux.c delete mode 100644 hw/bsp/mcx/boards/frdm_mcxa153/board/pin_mux.h create mode 100644 hw/bsp/mcx/boards/frdm_mcxa153/clock_config.c create mode 100644 hw/bsp/mcx/boards/frdm_mcxa153/clock_config.h create mode 100644 hw/bsp/mcx/boards/frdm_mcxa153/pin_mux.c create mode 100644 hw/bsp/mcx/boards/frdm_mcxa153/pin_mux.h diff --git a/hw/bsp/mcx/boards/frdm_mcxa153/board.cmake b/hw/bsp/mcx/boards/frdm_mcxa153/board.cmake index e6619992f..f0bf9510b 100644 --- a/hw/bsp/mcx/boards/frdm_mcxa153/board.cmake +++ b/hw/bsp/mcx/boards/frdm_mcxa153/board.cmake @@ -1,4 +1,5 @@ set(MCU_VARIANT MCXA153) +set(MCU_FAMILY MCXA) set(MCU_CORE MCXA153) set(JLINK_DEVICE MCXA153_M33) @@ -15,10 +16,10 @@ function(update_board TARGET) CFG_EXAMPLE_VIDEO_READONLY ) target_sources(${TARGET} PRIVATE - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/board/clock_config.c - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/board/pin_mux.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/clock_config.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/pin_mux.c ) target_include_directories(${TARGET} PUBLIC - ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/board + ${SDK_DIR}/${MCU_FAMILY}/periph ) endfunction() diff --git a/hw/bsp/mcx/boards/frdm_mcxa153/board.mk b/hw/bsp/mcx/boards/frdm_mcxa153/board.mk index 34558b43e..caa2e5a3b 100644 --- a/hw/bsp/mcx/boards/frdm_mcxa153/board.mk +++ b/hw/bsp/mcx/boards/frdm_mcxa153/board.mk @@ -1,4 +1,5 @@ MCU_VARIANT = MCXA153 +MCU_FAMILY = MCXA MCU_CORE = MCXA153 PORT = 0 @@ -9,11 +10,11 @@ CFLAGS += \ -DCFG_EXAMPLE_VIDEO_READONLY SRC_C += \ - ${BOARD_PATH}/board/clock_config.c \ - ${BOARD_PATH}/board/pin_mux.c + ${BOARD_PATH}/clock_config.c \ + ${BOARD_PATH}/pin_mux.c INC += \ - $(TOP)/$(BOARD_PATH)/board + $(TOP)/$(SDK_DIR)/$(MCU_FAMILY)/periph JLINK_DEVICE = MCXA153 PYOCD_TARGET = MCXA153 diff --git a/hw/bsp/mcx/boards/frdm_mcxa153/board/clock_config.c b/hw/bsp/mcx/boards/frdm_mcxa153/board/clock_config.c deleted file mode 100644 index 599110d7a..000000000 --- a/hw/bsp/mcx/boards/frdm_mcxa153/board/clock_config.c +++ /dev/null @@ -1,559 +0,0 @@ -/* - * Copyright 2025 NXP - * All rights reserved. - * - * SPDX-License-Identifier: BSD-3-Clause - */ - -/*********************************************************************************************************************** - * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file - * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. - **********************************************************************************************************************/ -/* - * How to setup clock using clock driver functions: - * - * 1. Setup clock sources. - * - * 2. Set up wait states of the flash. - * - * 3. Set up all dividers. - * - * 4. Set up all selectors to provide selected clocks. - * - */ - -/* clang-format off */ -/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* -!!GlobalInfo -product: Clocks v18.0 -processor: MCXA153 -package_id: MCXA153VLH -mcu_data: ksdk2_0 -processor_version: 25.09.10 -board: FRDM-MCXA153 - * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ -/* clang-format on */ - -#include "fsl_clock.h" -#include "clock_config.h" -#include "fsl_spc.h" - -/******************************************************************************* - * Definitions - ******************************************************************************/ - -/******************************************************************************* - * Variables - ******************************************************************************/ -/* System clock frequency. */ -extern uint32_t SystemCoreClock; - -/******************************************************************************* - ************************ BOARD_InitBootClocks function ************************ - ******************************************************************************/ -void BOARD_InitBootClocks(void) -{ - BOARD_BootClockFRO96M(); -} - -/******************************************************************************* - ******************** Configuration BOARD_BootClockFRO12M ********************** - ******************************************************************************/ -/* clang-format off */ -/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* -!!Configuration -name: BOARD_BootClockFRO12M -outputs: -- {id: CLK_1M_clock.outFreq, value: 1 MHz} -- {id: CPU_clock.outFreq, value: 12 MHz} -- {id: FRO_12M_clock.outFreq, value: 12 MHz} -- {id: MAIN_clock.outFreq, value: 12 MHz} -- {id: Slow_clock.outFreq, value: 3 MHz} -- {id: System_clock.outFreq, value: 12 MHz} -- {id: TRACE_clock.outFreq, value: 12 MHz} -- {id: UTICK_clock.outFreq, value: 1 MHz} -- {id: WWDT0_clock.outFreq, value: 1 MHz} -settings: -- {id: SCGMode, value: SIRC} -- {id: MRCC.FREQMEREFCLKSEL.sel, value: MRCC.aoi0_out0} -- {id: MRCC.FREQMETARGETCLKSEL.sel, value: MRCC.aoi0_out0} -- {id: MRCC.OSTIMERCLKSEL.sel, value: VBAT.CLK16K_1} -- {id: SCG.SCSSEL.sel, value: SCG.SIRC} -- {id: SCG_FIRCCSR_FIRCEN_CFG, value: Disabled} - * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ -/* clang-format on */ - -/******************************************************************************* - * Variables for BOARD_BootClockFRO12M configuration - ******************************************************************************/ -/******************************************************************************* - * Code for BOARD_BootClockFRO12M configuration - ******************************************************************************/ -void BOARD_BootClockFRO12M(void) -{ - uint32_t coreFreq; - spc_active_mode_core_ldo_option_t ldoOption; - spc_sram_voltage_config_t sramOption; - - /* Get the CPU Core frequency */ - coreFreq = CLOCK_GetCoreSysClkFreq(); - - /* The flow of increasing voltage and frequency */ - if (coreFreq <= BOARD_BOOTCLOCKFRO12M_CORE_CLOCK) { - /* Set the LDO_CORE VDD regulator level */ - ldoOption.CoreLDOVoltage = kSPC_CoreLDO_MidDriveVoltage; - ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength; - (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption); - /* Configure Flash to support different voltage level and frequency */ - FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x0U)); - /* Specifies the operating voltage for the SRAM's read/write timing margin */ - sramOption.operateVoltage = kSPC_sramOperateAt1P0V; - sramOption.requestVoltageUpdate = true; - (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption); - } - - - /*!< Set up system dividers */ - CLOCK_SetClockDiv(kCLOCK_DivAHBCLK, 1U); /* !< Set AHBCLKDIV divider to value 1 */ - CLOCK_SetupFRO12MClocking(); /*!< Setup FRO12M clock */ - - CLOCK_AttachClk(kFRO12M_to_MAIN_CLK); /* !< Switch MAIN_CLK to FRO12M */ - - /* The flow of decreasing voltage and frequency */ - if (coreFreq > BOARD_BOOTCLOCKFRO12M_CORE_CLOCK) { - /* Configure Flash to support different voltage level and frequency */ - FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x0U)); - /* Specifies the operating voltage for the SRAM's read/write timing margin */ - sramOption.operateVoltage = kSPC_sramOperateAt1P0V; - sramOption.requestVoltageUpdate = true; - (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption); - /* Set the LDO_CORE VDD regulator level */ - ldoOption.CoreLDOVoltage = kSPC_CoreLDO_MidDriveVoltage; - ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength; - (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption); - } - - /*!< Set up clock selectors - Attach clocks to the peripheries */ - CLOCK_AttachClk(kCPU_CLK_to_TRACE); /* !< Switch TRACE to CPU_CLK */ - - /*!< Set up dividers */ - CLOCK_SetClockDiv(kCLOCK_DivTRACE, 1U); /* !< Set TRACECLKDIV divider to value 1 */ - CLOCK_SetClockDiv(kCLOCK_DivWWDT0, 1U); /* !< Set WWDT0CLKDIV divider to value 1 */ - - /* Set SystemCoreClock variable */ - SystemCoreClock = BOARD_BOOTCLOCKFRO12M_CORE_CLOCK; -} -/******************************************************************************* - ******************** Configuration BOARD_BootClockFRO24M ********************** - ******************************************************************************/ -/* clang-format off */ -/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* -!!Configuration -name: BOARD_BootClockFRO24M -outputs: -- {id: CLK_1M_clock.outFreq, value: 1 MHz} -- {id: CLK_48M_clock.outFreq, value: 48 MHz} -- {id: CPU_clock.outFreq, value: 24 MHz} -- {id: FRO_12M_clock.outFreq, value: 12 MHz} -- {id: FRO_HF_DIV_clock.outFreq, value: 48 MHz} -- {id: FRO_HF_clock.outFreq, value: 48 MHz} -- {id: MAIN_clock.outFreq, value: 48 MHz} -- {id: Slow_clock.outFreq, value: 6 MHz} -- {id: System_clock.outFreq, value: 24 MHz} -- {id: TRACE_clock.outFreq, value: 24 MHz} -- {id: UTICK_clock.outFreq, value: 1 MHz} -- {id: WWDT0_clock.outFreq, value: 1 MHz} -settings: -- {id: MRCC.FREQMEREFCLKSEL.sel, value: MRCC.aoi0_out0} -- {id: MRCC.FREQMETARGETCLKSEL.sel, value: MRCC.aoi0_out0} -- {id: MRCC.OSTIMERCLKSEL.sel, value: VBAT.CLK16K_1} -- {id: SYSCON.AHBCLKDIV.scale, value: '2'} - * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ -/* clang-format on */ - -/******************************************************************************* - * Variables for BOARD_BootClockFRO24M configuration - ******************************************************************************/ -/******************************************************************************* - * Code for BOARD_BootClockFRO24M configuration - ******************************************************************************/ -void BOARD_BootClockFRO24M(void) -{ - uint32_t coreFreq; - spc_active_mode_core_ldo_option_t ldoOption; - spc_sram_voltage_config_t sramOption; - - /* Get the CPU Core frequency */ - coreFreq = CLOCK_GetCoreSysClkFreq(); - - /* The flow of increasing voltage and frequency */ - if (coreFreq <= BOARD_BOOTCLOCKFRO24M_CORE_CLOCK) { - /* Set the LDO_CORE VDD regulator level */ - ldoOption.CoreLDOVoltage = kSPC_CoreLDO_MidDriveVoltage; - ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength; - (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption); - /* Configure Flash to support different voltage level and frequency */ - FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x0U)); - /* Specifies the operating voltage for the SRAM's read/write timing margin */ - sramOption.operateVoltage = kSPC_sramOperateAt1P0V; - sramOption.requestVoltageUpdate = true; - (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption); - } - - - /*!< Set up system dividers */ - CLOCK_SetClockDiv(kCLOCK_DivAHBCLK, 2U); /* !< Set AHBCLKDIV divider to value 2 */ - CLOCK_SetClockDiv(kCLOCK_DivFRO_HF_DIV, 1U); /* !< Set FROHFDIV divider to value 1 */ - - CLOCK_SetupFROHFClocking(48000000U); /*!< Enable FRO HF(48MHz) output */ - - CLOCK_SetupFRO12MClocking(); /*!< Setup FRO12M clock */ - - CLOCK_AttachClk(kFRO_HF_to_MAIN_CLK); /* !< Switch MAIN_CLK to FRO_HF */ - - /* The flow of decreasing voltage and frequency */ - if (coreFreq > BOARD_BOOTCLOCKFRO24M_CORE_CLOCK) { - /* Configure Flash to support different voltage level and frequency */ - FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x0U)); - /* Specifies the operating voltage for the SRAM's read/write timing margin */ - sramOption.operateVoltage = kSPC_sramOperateAt1P0V; - sramOption.requestVoltageUpdate = true; - (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption); - /* Set the LDO_CORE VDD regulator level */ - ldoOption.CoreLDOVoltage = kSPC_CoreLDO_MidDriveVoltage; - ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength; - (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption); - } - - /*!< Set up clock selectors - Attach clocks to the peripheries */ - CLOCK_AttachClk(kCPU_CLK_to_TRACE); /* !< Switch TRACE to CPU_CLK */ - CLOCK_AttachClk(kFRO_HF_DIV_to_LPSPI0); /* !< Switch LPSPI0 to FRO_HF_DIV */ - CLOCK_AttachClk(kFRO_HF_DIV_to_LPSPI1); /* !< Switch LPSPI1 to FRO_HF_DIV */ - CLOCK_AttachClk(kFRO_HF_DIV_to_LPI2C0); /* !< Switch LPI2C0 to FRO_HF_DIV */ - CLOCK_AttachClk(kFRO_HF_DIV_to_LPUART0); /* !< Switch LPUART0 to FRO_HF_DIV */ - CLOCK_AttachClk(kFRO_HF_DIV_to_LPUART1); /* !< Switch LPUART1 to FRO_HF_DIV */ - CLOCK_AttachClk(kFRO_HF_DIV_to_LPUART2); /* !< Switch LPUART2 to FRO_HF_DIV */ - CLOCK_AttachClk(kFRO_HF_DIV_to_LPTMR0); /* !< Switch LPTMR0 to FRO_HF_DIV */ - CLOCK_AttachClk(kFRO_HF_DIV_to_I3C0FCLK); /* !< Switch I3C0FCLK to FRO_HF_DIV */ - CLOCK_AttachClk(kFRO_HF_DIV_to_CMP0); /* !< Switch CMP0 to FRO_HF_DIV */ - CLOCK_AttachClk(kFRO_HF_DIV_to_CMP1); /* !< Switch CMP1 to FRO_HF_DIV */ - - /*!< Set up dividers */ - CLOCK_SetClockDiv(kCLOCK_DivTRACE, 1U); /* !< Set TRACECLKDIV divider to value 1 */ - CLOCK_SetClockDiv(kCLOCK_DivWWDT0, 1U); /* !< Set WWDT0CLKDIV divider to value 1 */ - - /* Set SystemCoreClock variable */ - SystemCoreClock = BOARD_BOOTCLOCKFRO24M_CORE_CLOCK; -} -/******************************************************************************* - ******************** Configuration BOARD_BootClockFRO48M ********************** - ******************************************************************************/ -/* clang-format off */ -/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* -!!Configuration -name: BOARD_BootClockFRO48M -outputs: -- {id: CLK_1M_clock.outFreq, value: 1 MHz} -- {id: CLK_48M_clock.outFreq, value: 48 MHz} -- {id: CPU_clock.outFreq, value: 48 MHz} -- {id: FRO_12M_clock.outFreq, value: 12 MHz} -- {id: FRO_HF_DIV_clock.outFreq, value: 48 MHz} -- {id: FRO_HF_clock.outFreq, value: 48 MHz} -- {id: MAIN_clock.outFreq, value: 48 MHz} -- {id: Slow_clock.outFreq, value: 12 MHz} -- {id: System_clock.outFreq, value: 48 MHz} -- {id: TRACE_clock.outFreq, value: 48 MHz} -- {id: UTICK_clock.outFreq, value: 1 MHz} -- {id: WWDT0_clock.outFreq, value: 1 MHz} -settings: -- {id: MRCC.FREQMEREFCLKSEL.sel, value: MRCC.aoi0_out0} -- {id: MRCC.FREQMETARGETCLKSEL.sel, value: MRCC.aoi0_out0} -- {id: MRCC.OSTIMERCLKSEL.sel, value: VBAT.CLK16K_1} - * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ -/* clang-format on */ - -/******************************************************************************* - * Variables for BOARD_BootClockFRO48M configuration - ******************************************************************************/ -/******************************************************************************* - * Code for BOARD_BootClockFRO48M configuration - ******************************************************************************/ -void BOARD_BootClockFRO48M(void) -{ - uint32_t coreFreq; - spc_active_mode_core_ldo_option_t ldoOption; - spc_sram_voltage_config_t sramOption; - - /* Get the CPU Core frequency */ - coreFreq = CLOCK_GetCoreSysClkFreq(); - - /* The flow of increasing voltage and frequency */ - if (coreFreq <= BOARD_BOOTCLOCKFRO48M_CORE_CLOCK) { - /* Set the LDO_CORE VDD regulator level */ - ldoOption.CoreLDOVoltage = kSPC_CoreLDO_MidDriveVoltage; - ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength; - (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption); - /* Configure Flash to support different voltage level and frequency */ - FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x1U)); - /* Specifies the operating voltage for the SRAM's read/write timing margin */ - sramOption.operateVoltage = kSPC_sramOperateAt1P0V; - sramOption.requestVoltageUpdate = true; - (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption); - } - - - /*!< Set up system dividers */ - CLOCK_SetClockDiv(kCLOCK_DivAHBCLK, 1U); /* !< Set AHBCLKDIV divider to value 1 */ - CLOCK_SetClockDiv(kCLOCK_DivFRO_HF_DIV, 1U); /* !< Set FROHFDIV divider to value 1 */ - - CLOCK_SetupFROHFClocking(48000000U); /*!< Enable FRO HF(48MHz) output */ - - CLOCK_SetupFRO12MClocking(); /*!< Setup FRO12M clock */ - - CLOCK_AttachClk(kFRO_HF_to_MAIN_CLK); /* !< Switch MAIN_CLK to FRO_HF */ - - /* The flow of decreasing voltage and frequency */ - if (coreFreq > BOARD_BOOTCLOCKFRO48M_CORE_CLOCK) { - /* Configure Flash to support different voltage level and frequency */ - FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x1U)); - /* Specifies the operating voltage for the SRAM's read/write timing margin */ - sramOption.operateVoltage = kSPC_sramOperateAt1P0V; - sramOption.requestVoltageUpdate = true; - (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption); - /* Set the LDO_CORE VDD regulator level */ - ldoOption.CoreLDOVoltage = kSPC_CoreLDO_MidDriveVoltage; - ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength; - (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption); - } - - /*!< Set up clock selectors - Attach clocks to the peripheries */ - CLOCK_AttachClk(kCPU_CLK_to_TRACE); /* !< Switch TRACE to CPU_CLK */ - CLOCK_AttachClk(kFRO_HF_DIV_to_LPSPI0); /* !< Switch LPSPI0 to FRO_HF_DIV */ - CLOCK_AttachClk(kFRO_HF_DIV_to_LPSPI1); /* !< Switch LPSPI1 to FRO_HF_DIV */ - CLOCK_AttachClk(kFRO_HF_DIV_to_LPI2C0); /* !< Switch LPI2C0 to FRO_HF_DIV */ - CLOCK_AttachClk(kFRO_HF_DIV_to_LPUART0); /* !< Switch LPUART0 to FRO_HF_DIV */ - CLOCK_AttachClk(kFRO_HF_DIV_to_LPUART1); /* !< Switch LPUART1 to FRO_HF_DIV */ - CLOCK_AttachClk(kFRO_HF_DIV_to_LPUART2); /* !< Switch LPUART2 to FRO_HF_DIV */ - CLOCK_AttachClk(kFRO_HF_DIV_to_LPTMR0); /* !< Switch LPTMR0 to FRO_HF_DIV */ - CLOCK_AttachClk(kFRO_HF_DIV_to_I3C0FCLK); /* !< Switch I3C0FCLK to FRO_HF_DIV */ - CLOCK_AttachClk(kFRO_HF_DIV_to_CMP0); /* !< Switch CMP0 to FRO_HF_DIV */ - CLOCK_AttachClk(kFRO_HF_DIV_to_CMP1); /* !< Switch CMP1 to FRO_HF_DIV */ - - /*!< Set up dividers */ - CLOCK_SetClockDiv(kCLOCK_DivTRACE, 1U); /* !< Set TRACECLKDIV divider to value 1 */ - CLOCK_SetClockDiv(kCLOCK_DivWWDT0, 1U); /* !< Set WWDT0CLKDIV divider to value 1 */ - - /* Set SystemCoreClock variable */ - SystemCoreClock = BOARD_BOOTCLOCKFRO48M_CORE_CLOCK; -} -/******************************************************************************* - ******************** Configuration BOARD_BootClockFRO64M ********************** - ******************************************************************************/ -/* clang-format off */ -/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* -!!Configuration -name: BOARD_BootClockFRO64M -outputs: -- {id: CLK_1M_clock.outFreq, value: 1 MHz} -- {id: CLK_48M_clock.outFreq, value: 48 MHz} -- {id: CPU_clock.outFreq, value: 64 MHz} -- {id: FRO_12M_clock.outFreq, value: 12 MHz} -- {id: FRO_HF_DIV_clock.outFreq, value: 64 MHz} -- {id: FRO_HF_clock.outFreq, value: 64 MHz} -- {id: MAIN_clock.outFreq, value: 64 MHz} -- {id: Slow_clock.outFreq, value: 16 MHz} -- {id: System_clock.outFreq, value: 64 MHz} -- {id: TRACE_clock.outFreq, value: 64 MHz} -- {id: UTICK_clock.outFreq, value: 1 MHz} -- {id: WWDT0_clock.outFreq, value: 1 MHz} -settings: -- {id: VDD_CORE, value: voltage_1v1} -- {id: MRCC.FREQMEREFCLKSEL.sel, value: MRCC.aoi0_out0} -- {id: MRCC.FREQMETARGETCLKSEL.sel, value: MRCC.aoi0_out0} -- {id: MRCC.FROHFDIV.scale, value: '1', locked: true} -- {id: MRCC.OSTIMERCLKSEL.sel, value: VBAT.CLK16K_1} -- {id: SYSCON.AHBCLKDIV.scale, value: '1', locked: true} -sources: -- {id: SCG.FIRC.outFreq, value: 64 MHz} - * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ -/* clang-format on */ - -/******************************************************************************* - * Variables for BOARD_BootClockFRO64M configuration - ******************************************************************************/ -/******************************************************************************* - * Code for BOARD_BootClockFRO64M configuration - ******************************************************************************/ -void BOARD_BootClockFRO64M(void) -{ - uint32_t coreFreq; - spc_active_mode_core_ldo_option_t ldoOption; - spc_sram_voltage_config_t sramOption; - - /* Get the CPU Core frequency */ - coreFreq = CLOCK_GetCoreSysClkFreq(); - - /* The flow of increasing voltage and frequency */ - if (coreFreq <= BOARD_BOOTCLOCKFRO64M_CORE_CLOCK) { - /* Set the LDO_CORE VDD regulator level */ - ldoOption.CoreLDOVoltage = kSPC_CoreLDO_NormalVoltage; - ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength; - (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption); - /* Configure Flash to support different voltage level and frequency */ - FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x1U)); - /* Specifies the operating voltage for the SRAM's read/write timing margin */ - sramOption.operateVoltage = kSPC_sramOperateAt1P1V; - sramOption.requestVoltageUpdate = true; - (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption); - } - - - /*!< Set up system dividers */ - CLOCK_SetClockDiv(kCLOCK_DivAHBCLK, 1U); /* !< Set AHBCLKDIV divider to value 1 */ - CLOCK_SetClockDiv(kCLOCK_DivFRO_HF_DIV, 1U); /* !< Set FROHFDIV divider to value 1 */ - - CLOCK_SetupFROHFClocking(64000000U); /*!< Enable FRO HF(64MHz) output */ - - CLOCK_SetupFRO12MClocking(); /*!< Setup FRO12M clock */ - - CLOCK_AttachClk(kFRO_HF_to_MAIN_CLK); /* !< Switch MAIN_CLK to FRO_HF */ - - /* The flow of decreasing voltage and frequency */ - if (coreFreq > BOARD_BOOTCLOCKFRO64M_CORE_CLOCK) { - /* Configure Flash to support different voltage level and frequency */ - FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x1U)); - /* Specifies the operating voltage for the SRAM's read/write timing margin */ - sramOption.operateVoltage = kSPC_sramOperateAt1P1V; - sramOption.requestVoltageUpdate = true; - (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption); - /* Set the LDO_CORE VDD regulator level */ - ldoOption.CoreLDOVoltage = kSPC_CoreLDO_NormalVoltage; - ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength; - (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption); - } - - /*!< Set up clock selectors - Attach clocks to the peripheries */ - CLOCK_AttachClk(kCPU_CLK_to_TRACE); /* !< Switch TRACE to CPU_CLK */ - CLOCK_AttachClk(kFRO_HF_DIV_to_LPSPI0); /* !< Switch LPSPI0 to FRO_HF_DIV */ - CLOCK_AttachClk(kFRO_HF_DIV_to_LPSPI1); /* !< Switch LPSPI1 to FRO_HF_DIV */ - CLOCK_AttachClk(kFRO_HF_DIV_to_LPI2C0); /* !< Switch LPI2C0 to FRO_HF_DIV */ - CLOCK_AttachClk(kFRO_HF_DIV_to_LPUART0); /* !< Switch LPUART0 to FRO_HF_DIV */ - CLOCK_AttachClk(kFRO_HF_DIV_to_LPUART1); /* !< Switch LPUART1 to FRO_HF_DIV */ - CLOCK_AttachClk(kFRO_HF_DIV_to_LPUART2); /* !< Switch LPUART2 to FRO_HF_DIV */ - CLOCK_AttachClk(kFRO_HF_DIV_to_LPTMR0); /* !< Switch LPTMR0 to FRO_HF_DIV */ - CLOCK_AttachClk(kFRO_HF_DIV_to_I3C0FCLK); /* !< Switch I3C0FCLK to FRO_HF_DIV */ - CLOCK_AttachClk(kFRO_HF_DIV_to_CMP0); /* !< Switch CMP0 to FRO_HF_DIV */ - CLOCK_AttachClk(kFRO_HF_DIV_to_CMP1); /* !< Switch CMP1 to FRO_HF_DIV */ - - /*!< Set up dividers */ - CLOCK_SetClockDiv(kCLOCK_DivTRACE, 1U); /* !< Set TRACECLKDIV divider to value 1 */ - CLOCK_SetClockDiv(kCLOCK_DivWWDT0, 1U); /* !< Set WWDT0CLKDIV divider to value 1 */ - - /* Set SystemCoreClock variable */ - SystemCoreClock = BOARD_BOOTCLOCKFRO64M_CORE_CLOCK; -} -/******************************************************************************* - ******************** Configuration BOARD_BootClockFRO96M ********************** - ******************************************************************************/ -/* clang-format off */ -/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* -!!Configuration -name: BOARD_BootClockFRO96M -called_from_default_init: true -outputs: -- {id: CLK_1M_clock.outFreq, value: 1 MHz} -- {id: CLK_48M_clock.outFreq, value: 48 MHz} -- {id: CPU_clock.outFreq, value: 96 MHz} -- {id: FRO_12M_clock.outFreq, value: 12 MHz} -- {id: FRO_HF_DIV_clock.outFreq, value: 96 MHz} -- {id: FRO_HF_clock.outFreq, value: 96 MHz} -- {id: MAIN_clock.outFreq, value: 96 MHz} -- {id: Slow_clock.outFreq, value: 24 MHz} -- {id: System_clock.outFreq, value: 96 MHz} -- {id: TRACE_clock.outFreq, value: 96 MHz} -- {id: UTICK_clock.outFreq, value: 1 MHz} -- {id: WWDT0_clock.outFreq, value: 1 MHz} -settings: -- {id: VDD_CORE, value: voltage_1v1} -- {id: MRCC.FREQMEREFCLKSEL.sel, value: MRCC.aoi0_out0} -- {id: MRCC.FREQMETARGETCLKSEL.sel, value: MRCC.aoi0_out0} -- {id: MRCC.OSTIMERCLKSEL.sel, value: VBAT.CLK16K_1} -sources: -- {id: SCG.FIRC.outFreq, value: 96 MHz} - * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ -/* clang-format on */ - -/******************************************************************************* - * Variables for BOARD_BootClockFRO96M configuration - ******************************************************************************/ -/******************************************************************************* - * Code for BOARD_BootClockFRO96M configuration - ******************************************************************************/ -void BOARD_BootClockFRO96M(void) -{ - uint32_t coreFreq; - spc_active_mode_core_ldo_option_t ldoOption; - spc_sram_voltage_config_t sramOption; - - /* Get the CPU Core frequency */ - coreFreq = CLOCK_GetCoreSysClkFreq(); - - /* The flow of increasing voltage and frequency */ - if (coreFreq <= BOARD_BOOTCLOCKFRO96M_CORE_CLOCK) { - /* Set the LDO_CORE VDD regulator level */ - ldoOption.CoreLDOVoltage = kSPC_CoreLDO_NormalVoltage; - ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength; - (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption); - /* Configure Flash to support different voltage level and frequency */ - FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x2U)); - /* Specifies the operating voltage for the SRAM's read/write timing margin */ - sramOption.operateVoltage = kSPC_sramOperateAt1P1V; - sramOption.requestVoltageUpdate = true; - (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption); - } - - - /*!< Set up system dividers */ - CLOCK_SetClockDiv(kCLOCK_DivAHBCLK, 1U); /* !< Set AHBCLKDIV divider to value 1 */ - CLOCK_SetClockDiv(kCLOCK_DivFRO_HF_DIV, 1U); /* !< Set FROHFDIV divider to value 1 */ - - CLOCK_SetupFROHFClocking(96000000U); /*!< Enable FRO HF(96MHz) output */ - - CLOCK_SetupFRO12MClocking(); /*!< Setup FRO12M clock */ - - CLOCK_AttachClk(kFRO_HF_to_MAIN_CLK); /* !< Switch MAIN_CLK to FRO_HF */ - - /* The flow of decreasing voltage and frequency */ - if (coreFreq > BOARD_BOOTCLOCKFRO96M_CORE_CLOCK) { - /* Configure Flash to support different voltage level and frequency */ - FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x2U)); - /* Specifies the operating voltage for the SRAM's read/write timing margin */ - sramOption.operateVoltage = kSPC_sramOperateAt1P1V; - sramOption.requestVoltageUpdate = true; - (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption); - /* Set the LDO_CORE VDD regulator level */ - ldoOption.CoreLDOVoltage = kSPC_CoreLDO_NormalVoltage; - ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength; - (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption); - } - - /*!< Set up clock selectors - Attach clocks to the peripheries */ - CLOCK_AttachClk(kCPU_CLK_to_TRACE); /* !< Switch TRACE to CPU_CLK */ - CLOCK_AttachClk(kFRO_HF_DIV_to_LPSPI0); /* !< Switch LPSPI0 to FRO_HF_DIV */ - CLOCK_AttachClk(kFRO_HF_DIV_to_LPSPI1); /* !< Switch LPSPI1 to FRO_HF_DIV */ - CLOCK_AttachClk(kFRO_HF_DIV_to_LPI2C0); /* !< Switch LPI2C0 to FRO_HF_DIV */ - CLOCK_AttachClk(kFRO_HF_DIV_to_LPUART0); /* !< Switch LPUART0 to FRO_HF_DIV */ - CLOCK_AttachClk(kFRO_HF_DIV_to_LPUART1); /* !< Switch LPUART1 to FRO_HF_DIV */ - CLOCK_AttachClk(kFRO_HF_DIV_to_LPUART2); /* !< Switch LPUART2 to FRO_HF_DIV */ - CLOCK_AttachClk(kFRO_HF_DIV_to_LPTMR0); /* !< Switch LPTMR0 to FRO_HF_DIV */ - CLOCK_AttachClk(kFRO_HF_DIV_to_I3C0FCLK); /* !< Switch I3C0FCLK to FRO_HF_DIV */ - CLOCK_AttachClk(kFRO_HF_DIV_to_CMP0); /* !< Switch CMP0 to FRO_HF_DIV */ - CLOCK_AttachClk(kFRO_HF_DIV_to_CMP1); /* !< Switch CMP1 to FRO_HF_DIV */ - - /*!< Set up dividers */ - CLOCK_SetClockDiv(kCLOCK_DivTRACE, 1U); /* !< Set TRACECLKDIV divider to value 1 */ - CLOCK_SetClockDiv(kCLOCK_DivWWDT0, 1U); /* !< Set WWDT0CLKDIV divider to value 1 */ - - /* Set SystemCoreClock variable */ - SystemCoreClock = BOARD_BOOTCLOCKFRO96M_CORE_CLOCK; -} diff --git a/hw/bsp/mcx/boards/frdm_mcxa153/board/clock_config.h b/hw/bsp/mcx/boards/frdm_mcxa153/board/clock_config.h deleted file mode 100644 index d609eb468..000000000 --- a/hw/bsp/mcx/boards/frdm_mcxa153/board/clock_config.h +++ /dev/null @@ -1,385 +0,0 @@ -/* - * Copyright 2025 NXP - * All rights reserved. - * - * SPDX-License-Identifier: BSD-3-Clause - */ - -/*********************************************************************************************************************** - * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file - * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. - **********************************************************************************************************************/ - -#ifndef _CLOCK_CONFIG_H_ -#define _CLOCK_CONFIG_H_ - -#include "fsl_common.h" - -/******************************************************************************* - * Definitions - ******************************************************************************/ - -/******************************************************************************* - ************************ BOARD_InitBootClocks function ************************ - ******************************************************************************/ - -#if defined(__cplusplus) -extern "C" { -#endif /* __cplusplus*/ - -/*! - * @brief This function executes default configuration of clocks. - * - */ -void BOARD_InitBootClocks(void); - -#if defined(__cplusplus) -} -#endif /* __cplusplus*/ - -/******************************************************************************* - ******************** Configuration BOARD_BootClockFRO12M ********************** - ******************************************************************************/ -/******************************************************************************* - * Definitions for BOARD_BootClockFRO12M configuration - ******************************************************************************/ -#define BOARD_BOOTCLOCKFRO12M_CORE_CLOCK 12000000U /*!< Core clock frequency: 12000000Hz */ - -/* Clock outputs (values are in Hz): */ -#define BOARD_BOOTCLOCKFRO12M_ADC0_CLOCK 0UL /* Clock consumers of ADC0_clock output : ADC0 */ -#define BOARD_BOOTCLOCKFRO12M_CLK16K_0_CLOCK 0UL /* Clock consumers of CLK16K_0_clock output : CMP0, WAKETIMER0, WUU0 */ -#define BOARD_BOOTCLOCKFRO12M_CLK16K_1_CLOCK 0UL /* Clock consumers of CLK16K_1_clock output : CMP1, LPTMR0, WAKETIMER0 */ -#define BOARD_BOOTCLOCKFRO12M_CLKOUT_CLOCK 0UL /* Clock consumers of CLKOUT_clock output : N/A */ -#define BOARD_BOOTCLOCKFRO12M_CLK_1M_CLOCK 1000000UL /* Clock consumers of CLK_1M_clock output : CMC */ -#define BOARD_BOOTCLOCKFRO12M_CLK_48M_CLOCK 0UL /* Clock consumers of CLK_48M_clock output : N/A */ -#define BOARD_BOOTCLOCKFRO12M_CLK_IN_CLOCK 0UL /* Clock consumers of CLK_IN_clock output : N/A */ -#define BOARD_BOOTCLOCKFRO12M_CMP0FDIV_CLOCK 0UL /* Clock consumers of CMP0FDIV_clock output : CMP0 */ -#define BOARD_BOOTCLOCKFRO12M_CMP0RRDIV_CLOCK 0UL /* Clock consumers of CMP0RRDIV_clock output : CMP0 */ -#define BOARD_BOOTCLOCKFRO12M_CMP1FDIV_CLOCK 0UL /* Clock consumers of CMP1FDIV_clock output : CMP1 */ -#define BOARD_BOOTCLOCKFRO12M_CMP1RRDIV_CLOCK 0UL /* Clock consumers of CMP1RRDIV_clock output : CMP1 */ -#define BOARD_BOOTCLOCKFRO12M_CPU_CLOCK 12000000UL /* Clock consumers of CPU_clock output : N/A */ -#define BOARD_BOOTCLOCKFRO12M_CTIMER0_CLOCK 0UL /* Clock consumers of CTIMER0_clock output : CTIMER0 */ -#define BOARD_BOOTCLOCKFRO12M_CTIMER1_CLOCK 0UL /* Clock consumers of CTIMER1_clock output : CTIMER1 */ -#define BOARD_BOOTCLOCKFRO12M_CTIMER2_CLOCK 0UL /* Clock consumers of CTIMER2_clock output : CTIMER2 */ -#define BOARD_BOOTCLOCKFRO12M_FREQME_REFERENCE_CLOCK 0UL /* Clock consumers of FREQME_reference_clock output : FREQME0 */ -#define BOARD_BOOTCLOCKFRO12M_FREQME_TARGET_CLOCK 0UL /* Clock consumers of FREQME_target_clock output : FREQME0 */ -#define BOARD_BOOTCLOCKFRO12M_FRO_12M_CLOCK 12000000UL /* Clock consumers of FRO_12M_clock output : N/A */ -#define BOARD_BOOTCLOCKFRO12M_FRO_HF_DIV_CLOCK 0UL /* Clock consumers of FRO_HF_DIV_clock output : N/A */ -#define BOARD_BOOTCLOCKFRO12M_FRO_HF_CLOCK 0UL /* Clock consumers of FRO_HF_clock output : N/A */ -#define BOARD_BOOTCLOCKFRO12M_I3C_FCLK_CLOCK 0UL /* Clock consumers of I3C_FCLK_clock output : I3C0 */ -#define BOARD_BOOTCLOCKFRO12M_I3C_SLOW_TC_CLOCK 0UL /* Clock consumers of I3C_SLOW_TC_clock output : I3C0 */ -#define BOARD_BOOTCLOCKFRO12M_I3C_SLOW_CLOCK 0UL /* Clock consumers of I3C_SLOW_clock output : I3C0 */ -#define BOARD_BOOTCLOCKFRO12M_LPI2C0_CLOCK 0UL /* Clock consumers of LPI2C0_clock output : LPI2C0 */ -#define BOARD_BOOTCLOCKFRO12M_LPSPI0_CLOCK 0UL /* Clock consumers of LPSPI0_clock output : LPSPI0 */ -#define BOARD_BOOTCLOCKFRO12M_LPSPI1_CLOCK 0UL /* Clock consumers of LPSPI1_clock output : LPSPI1 */ -#define BOARD_BOOTCLOCKFRO12M_LPTMR0_CLOCK 0UL /* Clock consumers of LPTMR0_clock output : LPTMR0 */ -#define BOARD_BOOTCLOCKFRO12M_LPUART0_CLOCK 0UL /* Clock consumers of LPUART0_clock output : LPUART0 */ -#define BOARD_BOOTCLOCKFRO12M_LPUART1_CLOCK 0UL /* Clock consumers of LPUART1_clock output : LPUART1 */ -#define BOARD_BOOTCLOCKFRO12M_LPUART2_CLOCK 0UL /* Clock consumers of LPUART2_clock output : LPUART2 */ -#define BOARD_BOOTCLOCKFRO12M_MAIN_CLOCK 12000000UL /* Clock consumers of MAIN_clock output : FLEXPWM0 */ -#define BOARD_BOOTCLOCKFRO12M_OSTIMER_CLOCK 0UL /* Clock consumers of OSTIMER_clock output : OSTIMER0 */ -#define BOARD_BOOTCLOCKFRO12M_FIRC_TRIM_CLOCK 0UL /* Clock consumers of SCG.FIRC_TRIM_clock output : N/A */ -#define BOARD_BOOTCLOCKFRO12M_SIRC_TRIM_CLOCK 0UL /* Clock consumers of SCG.SIRC_TRIM_clock output : N/A */ -#define BOARD_BOOTCLOCKFRO12M_SLOW_CLOCK 3000000UL /* Clock consumers of Slow_clock output : AOI0, CMC, CMP0, LPTMR0, WAKETIMER0, WUU0 */ -#define BOARD_BOOTCLOCKFRO12M_SYSTEM_CLOCK 12000000UL /* Clock consumers of System_clock output : ADC0, CMP1, CTIMER0, CTIMER1, CTIMER2, DMA0, FLEXPWM0, FREQME0, GPIO0, GPIO1, GPIO2, GPIO3, I3C0, INPUTMUX0, LPI2C0, LPSPI0, LPSPI1, LPUART0, LPUART1, LPUART2, OSTIMER0, PORT0, PORT1, PORT2, PORT3, QDC0, SWD, SysTick, USB0, UTICK0, WWDT0 */ -#define BOARD_BOOTCLOCKFRO12M_TRACE_CLOCK 12000000UL /* Clock consumers of TRACE_clock output : SWD */ -#define BOARD_BOOTCLOCKFRO12M_USB0_CLOCK 0UL /* Clock consumers of USB0_clock output : USB0 */ -#define BOARD_BOOTCLOCKFRO12M_UTICK_CLOCK 1000000UL /* Clock consumers of UTICK_clock output : UTICK0 */ -#define BOARD_BOOTCLOCKFRO12M_WUU_CLOCK 0UL /* Clock consumers of WUU_clock output : N/A */ -#define BOARD_BOOTCLOCKFRO12M_WWDT0_CLOCK 1000000UL /* Clock consumers of WWDT0_clock output : WWDT0 */ - - -/******************************************************************************* - * API for BOARD_BootClockFRO12M configuration - ******************************************************************************/ -#if defined(__cplusplus) -extern "C" { -#endif /* __cplusplus*/ - -/*! - * @brief This function executes configuration of clocks. - * - */ -void BOARD_BootClockFRO12M(void); - -#if defined(__cplusplus) -} -#endif /* __cplusplus*/ - -/******************************************************************************* - ******************** Configuration BOARD_BootClockFRO24M ********************** - ******************************************************************************/ -/******************************************************************************* - * Definitions for BOARD_BootClockFRO24M configuration - ******************************************************************************/ -#define BOARD_BOOTCLOCKFRO24M_CORE_CLOCK 24000000U /*!< Core clock frequency: 24000000Hz */ - -/* Clock outputs (values are in Hz): */ -#define BOARD_BOOTCLOCKFRO24M_ADC0_CLOCK 0UL /* Clock consumers of ADC0_clock output : ADC0 */ -#define BOARD_BOOTCLOCKFRO24M_CLK16K_0_CLOCK 0UL /* Clock consumers of CLK16K_0_clock output : CMP0, WAKETIMER0, WUU0 */ -#define BOARD_BOOTCLOCKFRO24M_CLK16K_1_CLOCK 0UL /* Clock consumers of CLK16K_1_clock output : CMP1, LPTMR0, WAKETIMER0 */ -#define BOARD_BOOTCLOCKFRO24M_CLKOUT_CLOCK 0UL /* Clock consumers of CLKOUT_clock output : N/A */ -#define BOARD_BOOTCLOCKFRO24M_CLK_1M_CLOCK 1000000UL /* Clock consumers of CLK_1M_clock output : CMC */ -#define BOARD_BOOTCLOCKFRO24M_CLK_48M_CLOCK 48000000UL /* Clock consumers of CLK_48M_clock output : N/A */ -#define BOARD_BOOTCLOCKFRO24M_CLK_IN_CLOCK 0UL /* Clock consumers of CLK_IN_clock output : N/A */ -#define BOARD_BOOTCLOCKFRO24M_CMP0FDIV_CLOCK 0UL /* Clock consumers of CMP0FDIV_clock output : CMP0 */ -#define BOARD_BOOTCLOCKFRO24M_CMP0RRDIV_CLOCK 0UL /* Clock consumers of CMP0RRDIV_clock output : CMP0 */ -#define BOARD_BOOTCLOCKFRO24M_CMP1FDIV_CLOCK 0UL /* Clock consumers of CMP1FDIV_clock output : CMP1 */ -#define BOARD_BOOTCLOCKFRO24M_CMP1RRDIV_CLOCK 0UL /* Clock consumers of CMP1RRDIV_clock output : CMP1 */ -#define BOARD_BOOTCLOCKFRO24M_CPU_CLOCK 24000000UL /* Clock consumers of CPU_clock output : N/A */ -#define BOARD_BOOTCLOCKFRO24M_CTIMER0_CLOCK 0UL /* Clock consumers of CTIMER0_clock output : CTIMER0 */ -#define BOARD_BOOTCLOCKFRO24M_CTIMER1_CLOCK 0UL /* Clock consumers of CTIMER1_clock output : CTIMER1 */ -#define BOARD_BOOTCLOCKFRO24M_CTIMER2_CLOCK 0UL /* Clock consumers of CTIMER2_clock output : CTIMER2 */ -#define BOARD_BOOTCLOCKFRO24M_FREQME_REFERENCE_CLOCK 0UL /* Clock consumers of FREQME_reference_clock output : FREQME0 */ -#define BOARD_BOOTCLOCKFRO24M_FREQME_TARGET_CLOCK 0UL /* Clock consumers of FREQME_target_clock output : FREQME0 */ -#define BOARD_BOOTCLOCKFRO24M_FRO_12M_CLOCK 12000000UL /* Clock consumers of FRO_12M_clock output : N/A */ -#define BOARD_BOOTCLOCKFRO24M_FRO_HF_DIV_CLOCK 48000000UL /* Clock consumers of FRO_HF_DIV_clock output : N/A */ -#define BOARD_BOOTCLOCKFRO24M_FRO_HF_CLOCK 48000000UL /* Clock consumers of FRO_HF_clock output : N/A */ -#define BOARD_BOOTCLOCKFRO24M_I3C_FCLK_CLOCK 0UL /* Clock consumers of I3C_FCLK_clock output : I3C0 */ -#define BOARD_BOOTCLOCKFRO24M_I3C_SLOW_TC_CLOCK 0UL /* Clock consumers of I3C_SLOW_TC_clock output : I3C0 */ -#define BOARD_BOOTCLOCKFRO24M_I3C_SLOW_CLOCK 0UL /* Clock consumers of I3C_SLOW_clock output : I3C0 */ -#define BOARD_BOOTCLOCKFRO24M_LPI2C0_CLOCK 0UL /* Clock consumers of LPI2C0_clock output : LPI2C0 */ -#define BOARD_BOOTCLOCKFRO24M_LPSPI0_CLOCK 0UL /* Clock consumers of LPSPI0_clock output : LPSPI0 */ -#define BOARD_BOOTCLOCKFRO24M_LPSPI1_CLOCK 0UL /* Clock consumers of LPSPI1_clock output : LPSPI1 */ -#define BOARD_BOOTCLOCKFRO24M_LPTMR0_CLOCK 0UL /* Clock consumers of LPTMR0_clock output : LPTMR0 */ -#define BOARD_BOOTCLOCKFRO24M_LPUART0_CLOCK 0UL /* Clock consumers of LPUART0_clock output : LPUART0 */ -#define BOARD_BOOTCLOCKFRO24M_LPUART1_CLOCK 0UL /* Clock consumers of LPUART1_clock output : LPUART1 */ -#define BOARD_BOOTCLOCKFRO24M_LPUART2_CLOCK 0UL /* Clock consumers of LPUART2_clock output : LPUART2 */ -#define BOARD_BOOTCLOCKFRO24M_MAIN_CLOCK 48000000UL /* Clock consumers of MAIN_clock output : FLEXPWM0 */ -#define BOARD_BOOTCLOCKFRO24M_OSTIMER_CLOCK 0UL /* Clock consumers of OSTIMER_clock output : OSTIMER0 */ -#define BOARD_BOOTCLOCKFRO24M_FIRC_TRIM_CLOCK 0UL /* Clock consumers of SCG.FIRC_TRIM_clock output : N/A */ -#define BOARD_BOOTCLOCKFRO24M_SIRC_TRIM_CLOCK 0UL /* Clock consumers of SCG.SIRC_TRIM_clock output : N/A */ -#define BOARD_BOOTCLOCKFRO24M_SLOW_CLOCK 6000000UL /* Clock consumers of Slow_clock output : AOI0, CMC, CMP0, LPTMR0, WAKETIMER0, WUU0 */ -#define BOARD_BOOTCLOCKFRO24M_SYSTEM_CLOCK 24000000UL /* Clock consumers of System_clock output : ADC0, CMP1, CTIMER0, CTIMER1, CTIMER2, DMA0, FLEXPWM0, FREQME0, GPIO0, GPIO1, GPIO2, GPIO3, I3C0, INPUTMUX0, LPI2C0, LPSPI0, LPSPI1, LPUART0, LPUART1, LPUART2, OSTIMER0, PORT0, PORT1, PORT2, PORT3, QDC0, SWD, SysTick, USB0, UTICK0, WWDT0 */ -#define BOARD_BOOTCLOCKFRO24M_TRACE_CLOCK 24000000UL /* Clock consumers of TRACE_clock output : SWD */ -#define BOARD_BOOTCLOCKFRO24M_USB0_CLOCK 0UL /* Clock consumers of USB0_clock output : USB0 */ -#define BOARD_BOOTCLOCKFRO24M_UTICK_CLOCK 1000000UL /* Clock consumers of UTICK_clock output : UTICK0 */ -#define BOARD_BOOTCLOCKFRO24M_WUU_CLOCK 0UL /* Clock consumers of WUU_clock output : N/A */ -#define BOARD_BOOTCLOCKFRO24M_WWDT0_CLOCK 1000000UL /* Clock consumers of WWDT0_clock output : WWDT0 */ - - -/******************************************************************************* - * API for BOARD_BootClockFRO24M configuration - ******************************************************************************/ -#if defined(__cplusplus) -extern "C" { -#endif /* __cplusplus*/ - -/*! - * @brief This function executes configuration of clocks. - * - */ -void BOARD_BootClockFRO24M(void); - -#if defined(__cplusplus) -} -#endif /* __cplusplus*/ - -/******************************************************************************* - ******************** Configuration BOARD_BootClockFRO48M ********************** - ******************************************************************************/ -/******************************************************************************* - * Definitions for BOARD_BootClockFRO48M configuration - ******************************************************************************/ -#define BOARD_BOOTCLOCKFRO48M_CORE_CLOCK 48000000U /*!< Core clock frequency: 48000000Hz */ - -/* Clock outputs (values are in Hz): */ -#define BOARD_BOOTCLOCKFRO48M_ADC0_CLOCK 0UL /* Clock consumers of ADC0_clock output : ADC0 */ -#define BOARD_BOOTCLOCKFRO48M_CLK16K_0_CLOCK 0UL /* Clock consumers of CLK16K_0_clock output : CMP0, WAKETIMER0, WUU0 */ -#define BOARD_BOOTCLOCKFRO48M_CLK16K_1_CLOCK 0UL /* Clock consumers of CLK16K_1_clock output : CMP1, LPTMR0, WAKETIMER0 */ -#define BOARD_BOOTCLOCKFRO48M_CLKOUT_CLOCK 0UL /* Clock consumers of CLKOUT_clock output : N/A */ -#define BOARD_BOOTCLOCKFRO48M_CLK_1M_CLOCK 1000000UL /* Clock consumers of CLK_1M_clock output : CMC */ -#define BOARD_BOOTCLOCKFRO48M_CLK_48M_CLOCK 48000000UL /* Clock consumers of CLK_48M_clock output : N/A */ -#define BOARD_BOOTCLOCKFRO48M_CLK_IN_CLOCK 0UL /* Clock consumers of CLK_IN_clock output : N/A */ -#define BOARD_BOOTCLOCKFRO48M_CMP0FDIV_CLOCK 0UL /* Clock consumers of CMP0FDIV_clock output : CMP0 */ -#define BOARD_BOOTCLOCKFRO48M_CMP0RRDIV_CLOCK 0UL /* Clock consumers of CMP0RRDIV_clock output : CMP0 */ -#define BOARD_BOOTCLOCKFRO48M_CMP1FDIV_CLOCK 0UL /* Clock consumers of CMP1FDIV_clock output : CMP1 */ -#define BOARD_BOOTCLOCKFRO48M_CMP1RRDIV_CLOCK 0UL /* Clock consumers of CMP1RRDIV_clock output : CMP1 */ -#define BOARD_BOOTCLOCKFRO48M_CPU_CLOCK 48000000UL /* Clock consumers of CPU_clock output : N/A */ -#define BOARD_BOOTCLOCKFRO48M_CTIMER0_CLOCK 0UL /* Clock consumers of CTIMER0_clock output : CTIMER0 */ -#define BOARD_BOOTCLOCKFRO48M_CTIMER1_CLOCK 0UL /* Clock consumers of CTIMER1_clock output : CTIMER1 */ -#define BOARD_BOOTCLOCKFRO48M_CTIMER2_CLOCK 0UL /* Clock consumers of CTIMER2_clock output : CTIMER2 */ -#define BOARD_BOOTCLOCKFRO48M_FREQME_REFERENCE_CLOCK 0UL /* Clock consumers of FREQME_reference_clock output : FREQME0 */ -#define BOARD_BOOTCLOCKFRO48M_FREQME_TARGET_CLOCK 0UL /* Clock consumers of FREQME_target_clock output : FREQME0 */ -#define BOARD_BOOTCLOCKFRO48M_FRO_12M_CLOCK 12000000UL /* Clock consumers of FRO_12M_clock output : N/A */ -#define BOARD_BOOTCLOCKFRO48M_FRO_HF_DIV_CLOCK 48000000UL /* Clock consumers of FRO_HF_DIV_clock output : N/A */ -#define BOARD_BOOTCLOCKFRO48M_FRO_HF_CLOCK 48000000UL /* Clock consumers of FRO_HF_clock output : N/A */ -#define BOARD_BOOTCLOCKFRO48M_I3C_FCLK_CLOCK 0UL /* Clock consumers of I3C_FCLK_clock output : I3C0 */ -#define BOARD_BOOTCLOCKFRO48M_I3C_SLOW_TC_CLOCK 0UL /* Clock consumers of I3C_SLOW_TC_clock output : I3C0 */ -#define BOARD_BOOTCLOCKFRO48M_I3C_SLOW_CLOCK 0UL /* Clock consumers of I3C_SLOW_clock output : I3C0 */ -#define BOARD_BOOTCLOCKFRO48M_LPI2C0_CLOCK 0UL /* Clock consumers of LPI2C0_clock output : LPI2C0 */ -#define BOARD_BOOTCLOCKFRO48M_LPSPI0_CLOCK 0UL /* Clock consumers of LPSPI0_clock output : LPSPI0 */ -#define BOARD_BOOTCLOCKFRO48M_LPSPI1_CLOCK 0UL /* Clock consumers of LPSPI1_clock output : LPSPI1 */ -#define BOARD_BOOTCLOCKFRO48M_LPTMR0_CLOCK 0UL /* Clock consumers of LPTMR0_clock output : LPTMR0 */ -#define BOARD_BOOTCLOCKFRO48M_LPUART0_CLOCK 0UL /* Clock consumers of LPUART0_clock output : LPUART0 */ -#define BOARD_BOOTCLOCKFRO48M_LPUART1_CLOCK 0UL /* Clock consumers of LPUART1_clock output : LPUART1 */ -#define BOARD_BOOTCLOCKFRO48M_LPUART2_CLOCK 0UL /* Clock consumers of LPUART2_clock output : LPUART2 */ -#define BOARD_BOOTCLOCKFRO48M_MAIN_CLOCK 48000000UL /* Clock consumers of MAIN_clock output : FLEXPWM0 */ -#define BOARD_BOOTCLOCKFRO48M_OSTIMER_CLOCK 0UL /* Clock consumers of OSTIMER_clock output : OSTIMER0 */ -#define BOARD_BOOTCLOCKFRO48M_FIRC_TRIM_CLOCK 0UL /* Clock consumers of SCG.FIRC_TRIM_clock output : N/A */ -#define BOARD_BOOTCLOCKFRO48M_SIRC_TRIM_CLOCK 0UL /* Clock consumers of SCG.SIRC_TRIM_clock output : N/A */ -#define BOARD_BOOTCLOCKFRO48M_SLOW_CLOCK 12000000UL /* Clock consumers of Slow_clock output : AOI0, CMC, CMP0, LPTMR0, WAKETIMER0, WUU0 */ -#define BOARD_BOOTCLOCKFRO48M_SYSTEM_CLOCK 48000000UL /* Clock consumers of System_clock output : ADC0, CMP1, CTIMER0, CTIMER1, CTIMER2, DMA0, FLEXPWM0, FREQME0, GPIO0, GPIO1, GPIO2, GPIO3, I3C0, INPUTMUX0, LPI2C0, LPSPI0, LPSPI1, LPUART0, LPUART1, LPUART2, OSTIMER0, PORT0, PORT1, PORT2, PORT3, QDC0, SWD, SysTick, USB0, UTICK0, WWDT0 */ -#define BOARD_BOOTCLOCKFRO48M_TRACE_CLOCK 48000000UL /* Clock consumers of TRACE_clock output : SWD */ -#define BOARD_BOOTCLOCKFRO48M_USB0_CLOCK 0UL /* Clock consumers of USB0_clock output : USB0 */ -#define BOARD_BOOTCLOCKFRO48M_UTICK_CLOCK 1000000UL /* Clock consumers of UTICK_clock output : UTICK0 */ -#define BOARD_BOOTCLOCKFRO48M_WUU_CLOCK 0UL /* Clock consumers of WUU_clock output : N/A */ -#define BOARD_BOOTCLOCKFRO48M_WWDT0_CLOCK 1000000UL /* Clock consumers of WWDT0_clock output : WWDT0 */ - - -/******************************************************************************* - * API for BOARD_BootClockFRO48M configuration - ******************************************************************************/ -#if defined(__cplusplus) -extern "C" { -#endif /* __cplusplus*/ - -/*! - * @brief This function executes configuration of clocks. - * - */ -void BOARD_BootClockFRO48M(void); - -#if defined(__cplusplus) -} -#endif /* __cplusplus*/ - -/******************************************************************************* - ******************** Configuration BOARD_BootClockFRO64M ********************** - ******************************************************************************/ -/******************************************************************************* - * Definitions for BOARD_BootClockFRO64M configuration - ******************************************************************************/ -#define BOARD_BOOTCLOCKFRO64M_CORE_CLOCK 64000000U /*!< Core clock frequency: 64000000Hz */ - -/* Clock outputs (values are in Hz): */ -#define BOARD_BOOTCLOCKFRO64M_ADC0_CLOCK 0UL /* Clock consumers of ADC0_clock output : ADC0 */ -#define BOARD_BOOTCLOCKFRO64M_CLK16K_0_CLOCK 0UL /* Clock consumers of CLK16K_0_clock output : CMP0, WAKETIMER0, WUU0 */ -#define BOARD_BOOTCLOCKFRO64M_CLK16K_1_CLOCK 0UL /* Clock consumers of CLK16K_1_clock output : CMP1, LPTMR0, WAKETIMER0 */ -#define BOARD_BOOTCLOCKFRO64M_CLKOUT_CLOCK 0UL /* Clock consumers of CLKOUT_clock output : N/A */ -#define BOARD_BOOTCLOCKFRO64M_CLK_1M_CLOCK 1000000UL /* Clock consumers of CLK_1M_clock output : CMC */ -#define BOARD_BOOTCLOCKFRO64M_CLK_48M_CLOCK 48000000UL /* Clock consumers of CLK_48M_clock output : N/A */ -#define BOARD_BOOTCLOCKFRO64M_CLK_IN_CLOCK 0UL /* Clock consumers of CLK_IN_clock output : N/A */ -#define BOARD_BOOTCLOCKFRO64M_CMP0FDIV_CLOCK 0UL /* Clock consumers of CMP0FDIV_clock output : CMP0 */ -#define BOARD_BOOTCLOCKFRO64M_CMP0RRDIV_CLOCK 0UL /* Clock consumers of CMP0RRDIV_clock output : CMP0 */ -#define BOARD_BOOTCLOCKFRO64M_CMP1FDIV_CLOCK 0UL /* Clock consumers of CMP1FDIV_clock output : CMP1 */ -#define BOARD_BOOTCLOCKFRO64M_CMP1RRDIV_CLOCK 0UL /* Clock consumers of CMP1RRDIV_clock output : CMP1 */ -#define BOARD_BOOTCLOCKFRO64M_CPU_CLOCK 64000000UL /* Clock consumers of CPU_clock output : N/A */ -#define BOARD_BOOTCLOCKFRO64M_CTIMER0_CLOCK 0UL /* Clock consumers of CTIMER0_clock output : CTIMER0 */ -#define BOARD_BOOTCLOCKFRO64M_CTIMER1_CLOCK 0UL /* Clock consumers of CTIMER1_clock output : CTIMER1 */ -#define BOARD_BOOTCLOCKFRO64M_CTIMER2_CLOCK 0UL /* Clock consumers of CTIMER2_clock output : CTIMER2 */ -#define BOARD_BOOTCLOCKFRO64M_FREQME_REFERENCE_CLOCK 0UL /* Clock consumers of FREQME_reference_clock output : FREQME0 */ -#define BOARD_BOOTCLOCKFRO64M_FREQME_TARGET_CLOCK 0UL /* Clock consumers of FREQME_target_clock output : FREQME0 */ -#define BOARD_BOOTCLOCKFRO64M_FRO_12M_CLOCK 12000000UL /* Clock consumers of FRO_12M_clock output : N/A */ -#define BOARD_BOOTCLOCKFRO64M_FRO_HF_DIV_CLOCK 64000000UL /* Clock consumers of FRO_HF_DIV_clock output : N/A */ -#define BOARD_BOOTCLOCKFRO64M_FRO_HF_CLOCK 64000000UL /* Clock consumers of FRO_HF_clock output : N/A */ -#define BOARD_BOOTCLOCKFRO64M_I3C_FCLK_CLOCK 0UL /* Clock consumers of I3C_FCLK_clock output : I3C0 */ -#define BOARD_BOOTCLOCKFRO64M_I3C_SLOW_TC_CLOCK 0UL /* Clock consumers of I3C_SLOW_TC_clock output : I3C0 */ -#define BOARD_BOOTCLOCKFRO64M_I3C_SLOW_CLOCK 0UL /* Clock consumers of I3C_SLOW_clock output : I3C0 */ -#define BOARD_BOOTCLOCKFRO64M_LPI2C0_CLOCK 0UL /* Clock consumers of LPI2C0_clock output : LPI2C0 */ -#define BOARD_BOOTCLOCKFRO64M_LPSPI0_CLOCK 0UL /* Clock consumers of LPSPI0_clock output : LPSPI0 */ -#define BOARD_BOOTCLOCKFRO64M_LPSPI1_CLOCK 0UL /* Clock consumers of LPSPI1_clock output : LPSPI1 */ -#define BOARD_BOOTCLOCKFRO64M_LPTMR0_CLOCK 0UL /* Clock consumers of LPTMR0_clock output : LPTMR0 */ -#define BOARD_BOOTCLOCKFRO64M_LPUART0_CLOCK 0UL /* Clock consumers of LPUART0_clock output : LPUART0 */ -#define BOARD_BOOTCLOCKFRO64M_LPUART1_CLOCK 0UL /* Clock consumers of LPUART1_clock output : LPUART1 */ -#define BOARD_BOOTCLOCKFRO64M_LPUART2_CLOCK 0UL /* Clock consumers of LPUART2_clock output : LPUART2 */ -#define BOARD_BOOTCLOCKFRO64M_MAIN_CLOCK 64000000UL /* Clock consumers of MAIN_clock output : FLEXPWM0 */ -#define BOARD_BOOTCLOCKFRO64M_OSTIMER_CLOCK 0UL /* Clock consumers of OSTIMER_clock output : OSTIMER0 */ -#define BOARD_BOOTCLOCKFRO64M_FIRC_TRIM_CLOCK 0UL /* Clock consumers of SCG.FIRC_TRIM_clock output : N/A */ -#define BOARD_BOOTCLOCKFRO64M_SIRC_TRIM_CLOCK 0UL /* Clock consumers of SCG.SIRC_TRIM_clock output : N/A */ -#define BOARD_BOOTCLOCKFRO64M_SLOW_CLOCK 16000000UL /* Clock consumers of Slow_clock output : AOI0, CMC, CMP0, LPTMR0, WAKETIMER0, WUU0 */ -#define BOARD_BOOTCLOCKFRO64M_SYSTEM_CLOCK 64000000UL /* Clock consumers of System_clock output : ADC0, CMP1, CTIMER0, CTIMER1, CTIMER2, DMA0, FLEXPWM0, FREQME0, GPIO0, GPIO1, GPIO2, GPIO3, I3C0, INPUTMUX0, LPI2C0, LPSPI0, LPSPI1, LPUART0, LPUART1, LPUART2, OSTIMER0, PORT0, PORT1, PORT2, PORT3, QDC0, SWD, SysTick, USB0, UTICK0, WWDT0 */ -#define BOARD_BOOTCLOCKFRO64M_TRACE_CLOCK 64000000UL /* Clock consumers of TRACE_clock output : SWD */ -#define BOARD_BOOTCLOCKFRO64M_USB0_CLOCK 0UL /* Clock consumers of USB0_clock output : USB0 */ -#define BOARD_BOOTCLOCKFRO64M_UTICK_CLOCK 1000000UL /* Clock consumers of UTICK_clock output : UTICK0 */ -#define BOARD_BOOTCLOCKFRO64M_WUU_CLOCK 0UL /* Clock consumers of WUU_clock output : N/A */ -#define BOARD_BOOTCLOCKFRO64M_WWDT0_CLOCK 1000000UL /* Clock consumers of WWDT0_clock output : WWDT0 */ - - -/******************************************************************************* - * API for BOARD_BootClockFRO64M configuration - ******************************************************************************/ -#if defined(__cplusplus) -extern "C" { -#endif /* __cplusplus*/ - -/*! - * @brief This function executes configuration of clocks. - * - */ -void BOARD_BootClockFRO64M(void); - -#if defined(__cplusplus) -} -#endif /* __cplusplus*/ - -/******************************************************************************* - ******************** Configuration BOARD_BootClockFRO96M ********************** - ******************************************************************************/ -/******************************************************************************* - * Definitions for BOARD_BootClockFRO96M configuration - ******************************************************************************/ -#define BOARD_BOOTCLOCKFRO96M_CORE_CLOCK 96000000U /*!< Core clock frequency: 96000000Hz */ - -/* Clock outputs (values are in Hz): */ -#define BOARD_BOOTCLOCKFRO96M_ADC0_CLOCK 0UL /* Clock consumers of ADC0_clock output : ADC0 */ -#define BOARD_BOOTCLOCKFRO96M_CLK16K_0_CLOCK 0UL /* Clock consumers of CLK16K_0_clock output : CMP0, WAKETIMER0, WUU0 */ -#define BOARD_BOOTCLOCKFRO96M_CLK16K_1_CLOCK 0UL /* Clock consumers of CLK16K_1_clock output : CMP1, LPTMR0, WAKETIMER0 */ -#define BOARD_BOOTCLOCKFRO96M_CLKOUT_CLOCK 0UL /* Clock consumers of CLKOUT_clock output : N/A */ -#define BOARD_BOOTCLOCKFRO96M_CLK_1M_CLOCK 1000000UL /* Clock consumers of CLK_1M_clock output : CMC */ -#define BOARD_BOOTCLOCKFRO96M_CLK_48M_CLOCK 48000000UL /* Clock consumers of CLK_48M_clock output : N/A */ -#define BOARD_BOOTCLOCKFRO96M_CLK_IN_CLOCK 0UL /* Clock consumers of CLK_IN_clock output : N/A */ -#define BOARD_BOOTCLOCKFRO96M_CMP0FDIV_CLOCK 0UL /* Clock consumers of CMP0FDIV_clock output : CMP0 */ -#define BOARD_BOOTCLOCKFRO96M_CMP0RRDIV_CLOCK 0UL /* Clock consumers of CMP0RRDIV_clock output : CMP0 */ -#define BOARD_BOOTCLOCKFRO96M_CMP1FDIV_CLOCK 0UL /* Clock consumers of CMP1FDIV_clock output : CMP1 */ -#define BOARD_BOOTCLOCKFRO96M_CMP1RRDIV_CLOCK 0UL /* Clock consumers of CMP1RRDIV_clock output : CMP1 */ -#define BOARD_BOOTCLOCKFRO96M_CPU_CLOCK 96000000UL /* Clock consumers of CPU_clock output : N/A */ -#define BOARD_BOOTCLOCKFRO96M_CTIMER0_CLOCK 0UL /* Clock consumers of CTIMER0_clock output : CTIMER0 */ -#define BOARD_BOOTCLOCKFRO96M_CTIMER1_CLOCK 0UL /* Clock consumers of CTIMER1_clock output : CTIMER1 */ -#define BOARD_BOOTCLOCKFRO96M_CTIMER2_CLOCK 0UL /* Clock consumers of CTIMER2_clock output : CTIMER2 */ -#define BOARD_BOOTCLOCKFRO96M_FREQME_REFERENCE_CLOCK 0UL /* Clock consumers of FREQME_reference_clock output : FREQME0 */ -#define BOARD_BOOTCLOCKFRO96M_FREQME_TARGET_CLOCK 0UL /* Clock consumers of FREQME_target_clock output : FREQME0 */ -#define BOARD_BOOTCLOCKFRO96M_FRO_12M_CLOCK 12000000UL /* Clock consumers of FRO_12M_clock output : N/A */ -#define BOARD_BOOTCLOCKFRO96M_FRO_HF_DIV_CLOCK 96000000UL /* Clock consumers of FRO_HF_DIV_clock output : N/A */ -#define BOARD_BOOTCLOCKFRO96M_FRO_HF_CLOCK 96000000UL /* Clock consumers of FRO_HF_clock output : N/A */ -#define BOARD_BOOTCLOCKFRO96M_I3C_FCLK_CLOCK 0UL /* Clock consumers of I3C_FCLK_clock output : I3C0 */ -#define BOARD_BOOTCLOCKFRO96M_I3C_SLOW_TC_CLOCK 0UL /* Clock consumers of I3C_SLOW_TC_clock output : I3C0 */ -#define BOARD_BOOTCLOCKFRO96M_I3C_SLOW_CLOCK 0UL /* Clock consumers of I3C_SLOW_clock output : I3C0 */ -#define BOARD_BOOTCLOCKFRO96M_LPI2C0_CLOCK 0UL /* Clock consumers of LPI2C0_clock output : LPI2C0 */ -#define BOARD_BOOTCLOCKFRO96M_LPSPI0_CLOCK 0UL /* Clock consumers of LPSPI0_clock output : LPSPI0 */ -#define BOARD_BOOTCLOCKFRO96M_LPSPI1_CLOCK 0UL /* Clock consumers of LPSPI1_clock output : LPSPI1 */ -#define BOARD_BOOTCLOCKFRO96M_LPTMR0_CLOCK 0UL /* Clock consumers of LPTMR0_clock output : LPTMR0 */ -#define BOARD_BOOTCLOCKFRO96M_LPUART0_CLOCK 0UL /* Clock consumers of LPUART0_clock output : LPUART0 */ -#define BOARD_BOOTCLOCKFRO96M_LPUART1_CLOCK 0UL /* Clock consumers of LPUART1_clock output : LPUART1 */ -#define BOARD_BOOTCLOCKFRO96M_LPUART2_CLOCK 0UL /* Clock consumers of LPUART2_clock output : LPUART2 */ -#define BOARD_BOOTCLOCKFRO96M_MAIN_CLOCK 96000000UL /* Clock consumers of MAIN_clock output : FLEXPWM0 */ -#define BOARD_BOOTCLOCKFRO96M_OSTIMER_CLOCK 0UL /* Clock consumers of OSTIMER_clock output : OSTIMER0 */ -#define BOARD_BOOTCLOCKFRO96M_FIRC_TRIM_CLOCK 0UL /* Clock consumers of SCG.FIRC_TRIM_clock output : N/A */ -#define BOARD_BOOTCLOCKFRO96M_SIRC_TRIM_CLOCK 0UL /* Clock consumers of SCG.SIRC_TRIM_clock output : N/A */ -#define BOARD_BOOTCLOCKFRO96M_SLOW_CLOCK 24000000UL /* Clock consumers of Slow_clock output : AOI0, CMC, CMP0, LPTMR0, WAKETIMER0, WUU0 */ -#define BOARD_BOOTCLOCKFRO96M_SYSTEM_CLOCK 96000000UL /* Clock consumers of System_clock output : ADC0, CMP1, CTIMER0, CTIMER1, CTIMER2, DMA0, FLEXPWM0, FREQME0, GPIO0, GPIO1, GPIO2, GPIO3, I3C0, INPUTMUX0, LPI2C0, LPSPI0, LPSPI1, LPUART0, LPUART1, LPUART2, OSTIMER0, PORT0, PORT1, PORT2, PORT3, QDC0, SWD, SysTick, USB0, UTICK0, WWDT0 */ -#define BOARD_BOOTCLOCKFRO96M_TRACE_CLOCK 96000000UL /* Clock consumers of TRACE_clock output : SWD */ -#define BOARD_BOOTCLOCKFRO96M_USB0_CLOCK 0UL /* Clock consumers of USB0_clock output : USB0 */ -#define BOARD_BOOTCLOCKFRO96M_UTICK_CLOCK 1000000UL /* Clock consumers of UTICK_clock output : UTICK0 */ -#define BOARD_BOOTCLOCKFRO96M_WUU_CLOCK 0UL /* Clock consumers of WUU_clock output : N/A */ -#define BOARD_BOOTCLOCKFRO96M_WWDT0_CLOCK 1000000UL /* Clock consumers of WWDT0_clock output : WWDT0 */ - - -/******************************************************************************* - * API for BOARD_BootClockFRO96M configuration - ******************************************************************************/ -#if defined(__cplusplus) -extern "C" { -#endif /* __cplusplus*/ - -/*! - * @brief This function executes configuration of clocks. - * - */ -void BOARD_BootClockFRO96M(void); - -#if defined(__cplusplus) -} -#endif /* __cplusplus*/ - -#endif /* _CLOCK_CONFIG_H_ */ diff --git a/hw/bsp/mcx/boards/frdm_mcxa153/board/pin_mux.c b/hw/bsp/mcx/boards/frdm_mcxa153/board/pin_mux.c deleted file mode 100644 index 58b0f47e9..000000000 --- a/hw/bsp/mcx/boards/frdm_mcxa153/board/pin_mux.c +++ /dev/null @@ -1,492 +0,0 @@ -/* - * Copyright 2025 NXP - * All rights reserved. - * - * SPDX-License-Identifier: BSD-3-Clause - */ - -/*********************************************************************************************************************** - * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file - * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. - **********************************************************************************************************************/ - -/* clang-format off */ -/* - * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* -!!GlobalInfo -product: Pins v17.0 -processor: MCXA153 -package_id: MCXA153VLH -mcu_data: ksdk2_0 -processor_version: 25.09.10 -board: FRDM-MCXA153 -external_user_signals: {} - * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** - */ -/* clang-format on */ - -#include "fsl_common.h" -#include "fsl_port.h" -#include "fsl_gpio.h" -#include "pin_mux.h" - -/* FUNCTION ************************************************************************************************************ - * - * Function Name : BOARD_InitBootPins - * Description : Calls initialization functions. - * - * END ****************************************************************************************************************/ -void BOARD_InitBootPins(void) -{ - BOARD_InitDEBUG_UARTPins(); - BOARD_InitLEDsPins(); - BOARD_InitBUTTONsPins(); -} - -/* clang-format off */ -/* - * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* -BOARD_InitDEBUG_UARTPins: -- options: {callFromInitBoot: 'true', coreID: cm33_core0, enableClock: 'true'} -- pin_list: - - {pin_num: '51', peripheral: LPUART0, signal: RX, pin_signal: P0_2/TDO/SWO/LPUART0_RXD/LPSPI0_SCK/CT0_MAT0/UTICK_CAP0/I3C0_PUR, slew_rate: fast, open_drain: disable, - drive_strength: high, pull_select: down, pull_enable: disable, input_buffer: enable, invert_input: normal} - - {pin_num: '52', peripheral: LPUART0, signal: TX, pin_signal: P0_3/TDI/LPUART0_TXD/LPSPI0_SDO/CT0_MAT1/UTICK_CAP1/CMP0_OUT/CMP1_IN1, slew_rate: fast, open_drain: disable, - drive_strength: low, pull_select: up, pull_enable: enable, input_buffer: enable, invert_input: normal} - * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** - */ -/* clang-format on */ - -/* FUNCTION ************************************************************************************************************ - * - * Function Name : BOARD_InitDEBUG_UARTPins - * Description : Configures pin routing and optionally pin electrical features. - * - * END ****************************************************************************************************************/ -void BOARD_InitDEBUG_UARTPins(void) -{ - /* Write to PORT0: Peripheral clock is enabled */ - CLOCK_EnableClock(kCLOCK_GatePORT0); - /* LPUART0 peripheral is released from reset */ - RESET_ReleasePeripheralReset(kLPUART0_RST_SHIFT_RSTn); - /* PORT0 peripheral is released from reset */ - RESET_ReleasePeripheralReset(kPORT0_RST_SHIFT_RSTn); - - const port_pin_config_t DEBUG_UART_RX = {/* Internal pull-up/down resistor is disabled */ - .pullSelect = kPORT_PullDisable, - /* Low internal pull resistor value is selected. */ - .pullValueSelect = kPORT_LowPullResistor, - /* Fast slew rate is configured */ - .slewRate = kPORT_FastSlewRate, - /* Passive input filter is disabled */ - .passiveFilterEnable = kPORT_PassiveFilterDisable, - /* Open drain output is disabled */ - .openDrainEnable = kPORT_OpenDrainDisable, - /* High drive strength is configured */ - .driveStrength = kPORT_HighDriveStrength, - /* Normal drive strength is configured */ - .driveStrength1 = kPORT_NormalDriveStrength, - /* Pin is configured as LPUART0_RXD */ - .mux = kPORT_MuxAlt2, - /* Digital input enabled */ - .inputBuffer = kPORT_InputBufferEnable, - /* Digital input is not inverted */ - .invertInput = kPORT_InputNormal, - /* Pin Control Register fields [15:0] are not locked */ - .lockRegister = kPORT_UnlockRegister}; - /* PORT0_2 (pin 51) is configured as LPUART0_RXD */ - PORT_SetPinConfig(BOARD_INITDEBUG_UARTPINS_DEBUG_UART_RX_PORT, BOARD_INITDEBUG_UARTPINS_DEBUG_UART_RX_PIN, &DEBUG_UART_RX); - - const port_pin_config_t DEBUG_UART_TX = {/* Internal pull-up resistor is enabled */ - .pullSelect = kPORT_PullUp, - /* Low internal pull resistor value is selected. */ - .pullValueSelect = kPORT_LowPullResistor, - /* Fast slew rate is configured */ - .slewRate = kPORT_FastSlewRate, - /* Passive input filter is disabled */ - .passiveFilterEnable = kPORT_PassiveFilterDisable, - /* Open drain output is disabled */ - .openDrainEnable = kPORT_OpenDrainDisable, - /* Low drive strength is configured */ - .driveStrength = kPORT_LowDriveStrength, - /* Normal drive strength is configured */ - .driveStrength1 = kPORT_NormalDriveStrength, - /* Pin is configured as LPUART0_TXD */ - .mux = kPORT_MuxAlt2, - /* Digital input enabled */ - .inputBuffer = kPORT_InputBufferEnable, - /* Digital input is not inverted */ - .invertInput = kPORT_InputNormal, - /* Pin Control Register fields [15:0] are not locked */ - .lockRegister = kPORT_UnlockRegister}; - /* PORT0_3 (pin 52) is configured as LPUART0_TXD */ - PORT_SetPinConfig(BOARD_INITDEBUG_UARTPINS_DEBUG_UART_TX_PORT, BOARD_INITDEBUG_UARTPINS_DEBUG_UART_TX_PIN, &DEBUG_UART_TX); -} - -/* clang-format off */ -/* - * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* -BOARD_InitSWD_DEBUGPins: -- options: {callFromInitBoot: 'false', coreID: cm33_core0, enableClock: 'true'} -- pin_list: - - {pin_num: '50', peripheral: SWD, signal: SWCLK, pin_signal: P0_1/TCLK/SWCLK/LPUART0_CTS_B/LPSPI0_SDI/CT_INP1, slew_rate: fast, open_drain: disable, drive_strength: low, - pull_select: down, pull_enable: enable, input_buffer: enable, invert_input: normal} - - {pin_num: '49', peripheral: SWD, signal: SWDIO, pin_signal: P0_0/TMS/SWDIO/LPUART0_RTS_B/LPSPI0_PCS0/CT_INP0, slew_rate: fast, open_drain: disable, drive_strength: high, - pull_select: up, pull_enable: enable, input_buffer: enable, invert_input: normal} - - {pin_num: '51', peripheral: SWD, signal: SWO, pin_signal: P0_2/TDO/SWO/LPUART0_RXD/LPSPI0_SCK/CT0_MAT0/UTICK_CAP0/I3C0_PUR, slew_rate: fast, open_drain: disable, - drive_strength: high, pull_select: down, pull_enable: disable, input_buffer: enable, invert_input: normal} - * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** - */ -/* clang-format on */ - -/* FUNCTION ************************************************************************************************************ - * - * Function Name : BOARD_InitSWD_DEBUGPins - * Description : Configures pin routing and optionally pin electrical features. - * - * END ****************************************************************************************************************/ -void BOARD_InitSWD_DEBUGPins(void) -{ - /* Write to PORT0: Peripheral clock is enabled */ - CLOCK_EnableClock(kCLOCK_GatePORT0); - /* PORT0 peripheral is released from reset */ - RESET_ReleasePeripheralReset(kPORT0_RST_SHIFT_RSTn); - /* LPUART0 peripheral is released from reset */ - RESET_ReleasePeripheralReset(kLPUART0_RST_SHIFT_RSTn); - - const port_pin_config_t DEBUG_SWD_SWDIO = {/* Internal pull-up resistor is enabled */ - .pullSelect = kPORT_PullUp, - /* Low internal pull resistor value is selected. */ - .pullValueSelect = kPORT_LowPullResistor, - /* Fast slew rate is configured */ - .slewRate = kPORT_FastSlewRate, - /* Passive input filter is disabled */ - .passiveFilterEnable = kPORT_PassiveFilterDisable, - /* Open drain output is disabled */ - .openDrainEnable = kPORT_OpenDrainDisable, - /* High drive strength is configured */ - .driveStrength = kPORT_HighDriveStrength, - /* Normal drive strength is configured */ - .driveStrength1 = kPORT_NormalDriveStrength, - /* Pin is configured as SWDIO */ - .mux = kPORT_MuxAlt1, - /* Digital input enabled */ - .inputBuffer = kPORT_InputBufferEnable, - /* Digital input is not inverted */ - .invertInput = kPORT_InputNormal, - /* Pin Control Register fields [15:0] are not locked */ - .lockRegister = kPORT_UnlockRegister}; - /* PORT0_0 (pin 49) is configured as SWDIO */ - PORT_SetPinConfig(BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDIO_PORT, BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDIO_PIN, &DEBUG_SWD_SWDIO); - - const port_pin_config_t DEBUG_SWD_SWDCLK = {/* Internal pull-down resistor is enabled */ - .pullSelect = kPORT_PullDown, - /* Low internal pull resistor value is selected. */ - .pullValueSelect = kPORT_LowPullResistor, - /* Fast slew rate is configured */ - .slewRate = kPORT_FastSlewRate, - /* Passive input filter is disabled */ - .passiveFilterEnable = kPORT_PassiveFilterDisable, - /* Open drain output is disabled */ - .openDrainEnable = kPORT_OpenDrainDisable, - /* Low drive strength is configured */ - .driveStrength = kPORT_LowDriveStrength, - /* Normal drive strength is configured */ - .driveStrength1 = kPORT_NormalDriveStrength, - /* Pin is configured as SWCLK */ - .mux = kPORT_MuxAlt1, - /* Digital input enabled */ - .inputBuffer = kPORT_InputBufferEnable, - /* Digital input is not inverted */ - .invertInput = kPORT_InputNormal, - /* Pin Control Register fields [15:0] are not locked */ - .lockRegister = kPORT_UnlockRegister}; - /* PORT0_1 (pin 50) is configured as SWCLK */ - PORT_SetPinConfig(BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDCLK_PORT, BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDCLK_PIN, &DEBUG_SWD_SWDCLK); - - const port_pin_config_t DEBUG_UART_RX = {/* Internal pull-up/down resistor is disabled */ - .pullSelect = kPORT_PullDisable, - /* Low internal pull resistor value is selected. */ - .pullValueSelect = kPORT_LowPullResistor, - /* Fast slew rate is configured */ - .slewRate = kPORT_FastSlewRate, - /* Passive input filter is disabled */ - .passiveFilterEnable = kPORT_PassiveFilterDisable, - /* Open drain output is disabled */ - .openDrainEnable = kPORT_OpenDrainDisable, - /* High drive strength is configured */ - .driveStrength = kPORT_HighDriveStrength, - /* Normal drive strength is configured */ - .driveStrength1 = kPORT_NormalDriveStrength, - /* Pin is configured as SWO */ - .mux = kPORT_MuxAlt1, - /* Digital input enabled */ - .inputBuffer = kPORT_InputBufferEnable, - /* Digital input is not inverted */ - .invertInput = kPORT_InputNormal, - /* Pin Control Register fields [15:0] are not locked */ - .lockRegister = kPORT_UnlockRegister}; - /* PORT0_2 (pin 51) is configured as SWO */ - PORT_SetPinConfig(BOARD_INITSWD_DEBUGPINS_DEBUG_UART_RX_PORT, BOARD_INITSWD_DEBUGPINS_DEBUG_UART_RX_PIN, &DEBUG_UART_RX); -} - -/* clang-format off */ -/* - * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* -BOARD_InitLEDsPins: -- options: {callFromInitBoot: 'true', coreID: cm33_core0, enableClock: 'true'} -- pin_list: - - {pin_num: '37', peripheral: GPIO3, signal: 'GPIO, 13', pin_signal: P3_13/LPUART2_CTS_B/CT1_MAT3/PWM0_X1, direction: OUTPUT, gpio_init_state: 'true', slew_rate: fast, - open_drain: disable, drive_strength: low, pull_select: up, pull_enable: disable, input_buffer: enable, invert_input: normal} - - {pin_num: '38', peripheral: GPIO3, signal: 'GPIO, 12', pin_signal: P3_12/LPUART2_RTS_B/CT1_MAT2/PWM0_X0, direction: OUTPUT, gpio_init_state: 'true', slew_rate: fast, - open_drain: disable, drive_strength: low, pull_select: up, pull_enable: disable, input_buffer: enable, invert_input: normal} - - {pin_num: '46', peripheral: GPIO3, signal: 'GPIO, 0', pin_signal: P3_0/WUU0_IN22/TRIG_IN0/CT_INP16/PWM0_A0, direction: OUTPUT, gpio_init_state: 'true', slew_rate: fast, - open_drain: disable, drive_strength: low, pull_select: up, pull_enable: disable, passive_filter: disable, input_buffer: enable, invert_input: normal} - * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** - */ -/* clang-format on */ - -/* FUNCTION ************************************************************************************************************ - * - * Function Name : BOARD_InitLEDsPins - * Description : Configures pin routing and optionally pin electrical features. - * - * END ****************************************************************************************************************/ -void BOARD_InitLEDsPins(void) -{ - /* Write to GPIO3: Peripheral clock is enabled */ - CLOCK_EnableClock(kCLOCK_GateGPIO3); - /* Write to PORT3: Peripheral clock is enabled */ - CLOCK_EnableClock(kCLOCK_GatePORT3); - /* GPIO3 peripheral is released from reset */ - RESET_ReleasePeripheralReset(kGPIO3_RST_SHIFT_RSTn); - /* PORT3 peripheral is released from reset */ - RESET_ReleasePeripheralReset(kPORT3_RST_SHIFT_RSTn); - - gpio_pin_config_t LED_BLUE_config = { - .pinDirection = kGPIO_DigitalOutput, - .outputLogic = 1U - }; - /* Initialize GPIO functionality on pin PIO3_0 (pin 46) */ - GPIO_PinInit(BOARD_INITLEDSPINS_LED_BLUE_GPIO, BOARD_INITLEDSPINS_LED_BLUE_PIN, &LED_BLUE_config); - - gpio_pin_config_t LED_RED_config = { - .pinDirection = kGPIO_DigitalOutput, - .outputLogic = 1U - }; - /* Initialize GPIO functionality on pin PIO3_12 (pin 38) */ - GPIO_PinInit(BOARD_INITLEDSPINS_LED_RED_GPIO, BOARD_INITLEDSPINS_LED_RED_PIN, &LED_RED_config); - - gpio_pin_config_t LED_GREEN_config = { - .pinDirection = kGPIO_DigitalOutput, - .outputLogic = 1U - }; - /* Initialize GPIO functionality on pin PIO3_13 (pin 37) */ - GPIO_PinInit(BOARD_INITLEDSPINS_LED_GREEN_GPIO, BOARD_INITLEDSPINS_LED_GREEN_PIN, &LED_GREEN_config); - - /* PORT3_0 (pin 46) is configured as P3_0 */ - PORT_SetPinMux(BOARD_INITLEDSPINS_LED_BLUE_PORT, BOARD_INITLEDSPINS_LED_BLUE_PIN, kPORT_MuxAlt0); - - PORT3->PCR[0] = - ((PORT3->PCR[0] & - /* Mask bits to zero which are setting */ - (~(PORT_PCR_PS_MASK | PORT_PCR_PE_MASK | PORT_PCR_SRE_MASK | PORT_PCR_PFE_MASK | PORT_PCR_ODE_MASK | PORT_PCR_DSE_MASK | PORT_PCR_IBE_MASK | PORT_PCR_INV_MASK))) - - /* Pull Select: Enables internal pullup resistor. */ - | PORT_PCR_PS(PCR_PS_ps1) - - /* Pull Enable: Disables. */ - | PORT_PCR_PE(PCR_PE_pe0) - - /* Slew Rate Enable: Fast. */ - | PORT_PCR_SRE(PCR_SRE_sre0) - - /* Passive Filter Enable: Disables. */ - | PORT_PCR_PFE(PCR_PFE_pfe0) - - /* Open Drain Enable: Disables. */ - | PORT_PCR_ODE(PCR_ODE_ode0) - - /* Drive Strength Enable: Low. */ - | PORT_PCR_DSE(PCR_DSE_dse0) - - /* Input Buffer Enable: Enables. */ - | PORT_PCR_IBE(PCR_IBE_ibe1) - - /* Invert Input: Does not invert. */ - | PORT_PCR_INV(PCR_INV_inv0)); - - /* PORT3_12 (pin 38) is configured as P3_12 */ - PORT_SetPinMux(BOARD_INITLEDSPINS_LED_RED_PORT, BOARD_INITLEDSPINS_LED_RED_PIN, kPORT_MuxAlt0); - - PORT3->PCR[12] = - ((PORT3->PCR[12] & - /* Mask bits to zero which are setting */ - (~(PORT_PCR_PS_MASK | PORT_PCR_PE_MASK | PORT_PCR_SRE_MASK | PORT_PCR_ODE_MASK | PORT_PCR_DSE_MASK | PORT_PCR_IBE_MASK | PORT_PCR_INV_MASK))) - - /* Pull Select: Enables internal pullup resistor. */ - | PORT_PCR_PS(PCR_PS_ps1) - - /* Pull Enable: Disables. */ - | PORT_PCR_PE(PCR_PE_pe0) - - /* Slew Rate Enable: Fast. */ - | PORT_PCR_SRE(PCR_SRE_sre0) - - /* Open Drain Enable: Disables. */ - | PORT_PCR_ODE(PCR_ODE_ode0) - - /* Drive Strength Enable: Low. */ - | PORT_PCR_DSE(PCR_DSE_dse0) - - /* Input Buffer Enable: Enables. */ - | PORT_PCR_IBE(PCR_IBE_ibe1) - - /* Invert Input: Does not invert. */ - | PORT_PCR_INV(PCR_INV_inv0)); - - /* PORT3_13 (pin 37) is configured as P3_13 */ - PORT_SetPinMux(BOARD_INITLEDSPINS_LED_GREEN_PORT, BOARD_INITLEDSPINS_LED_GREEN_PIN, kPORT_MuxAlt0); - - PORT3->PCR[13] = - ((PORT3->PCR[13] & - /* Mask bits to zero which are setting */ - (~(PORT_PCR_PS_MASK | PORT_PCR_PE_MASK | PORT_PCR_SRE_MASK | PORT_PCR_ODE_MASK | PORT_PCR_DSE_MASK | PORT_PCR_IBE_MASK | PORT_PCR_INV_MASK))) - - /* Pull Select: Enables internal pullup resistor. */ - | PORT_PCR_PS(PCR_PS_ps1) - - /* Pull Enable: Disables. */ - | PORT_PCR_PE(PCR_PE_pe0) - - /* Slew Rate Enable: Fast. */ - | PORT_PCR_SRE(PCR_SRE_sre0) - - /* Open Drain Enable: Disables. */ - | PORT_PCR_ODE(PCR_ODE_ode0) - - /* Drive Strength Enable: Low. */ - | PORT_PCR_DSE(PCR_DSE_dse0) - - /* Input Buffer Enable: Enables. */ - | PORT_PCR_IBE(PCR_IBE_ibe1) - - /* Invert Input: Does not invert. */ - | PORT_PCR_INV(PCR_INV_inv0)); -} - -/* clang-format off */ -/* - * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* -BOARD_InitBUTTONsPins: -- options: {callFromInitBoot: 'true', coreID: cm33_core0, enableClock: 'true'} -- pin_list: - - {pin_num: '1', peripheral: GPIO1, signal: 'GPIO, 7', pin_signal: P1_7/WUU0_IN9/TRIG_OUT2/LPUART2_CTS_B/CT_INP7/ADC0_A23, slew_rate: fast, open_drain: disable, - drive_strength: low, pull_select: down, pull_enable: disable, input_buffer: enable, invert_input: normal} - - {pin_num: '8', peripheral: GPIO1, signal: 'GPIO, 29', pin_signal: P1_29/RESET_B/SPC_LPREQ, slew_rate: fast, open_drain: enable, drive_strength: low, pull_select: up, - pull_enable: enable, passive_filter: enable, pull_value: low, input_buffer: enable, invert_input: normal} - - {pin_num: '32', peripheral: GPIO3, signal: 'GPIO, 29', pin_signal: P3_29/WUU0_IN27/ISPMODE_N/CT_INP3/ADC0_A14, slew_rate: fast, open_drain: disable, drive_strength: low, - pull_select: up, pull_enable: enable, input_buffer: enable, invert_input: normal} - * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** - */ -/* clang-format on */ - -/* FUNCTION ************************************************************************************************************ - * - * Function Name : BOARD_InitBUTTONsPins - * Description : Configures pin routing and optionally pin electrical features. - * - * END ****************************************************************************************************************/ -void BOARD_InitBUTTONsPins(void) -{ - /* Write to PORT1: Peripheral clock is enabled */ - CLOCK_EnableClock(kCLOCK_GatePORT1); - /* Write to PORT3: Peripheral clock is enabled */ - CLOCK_EnableClock(kCLOCK_GatePORT3); - /* GPIO1 peripheral is released from reset */ - RESET_ReleasePeripheralReset(kGPIO1_RST_SHIFT_RSTn); - /* PORT1 peripheral is released from reset */ - RESET_ReleasePeripheralReset(kPORT1_RST_SHIFT_RSTn); - /* GPIO3 peripheral is released from reset */ - RESET_ReleasePeripheralReset(kGPIO3_RST_SHIFT_RSTn); - /* PORT3 peripheral is released from reset */ - RESET_ReleasePeripheralReset(kPORT3_RST_SHIFT_RSTn); - - const port_pin_config_t SW1 = {/* Internal pull-up resistor is enabled */ - .pullSelect = kPORT_PullUp, - /* Low internal pull resistor value is selected. */ - .pullValueSelect = kPORT_LowPullResistor, - /* Fast slew rate is configured */ - .slewRate = kPORT_FastSlewRate, - /* Passive input filter is enabled */ - .passiveFilterEnable = kPORT_PassiveFilterEnable, - /* Open drain output is enabled */ - .openDrainEnable = kPORT_OpenDrainEnable, - /* Low drive strength is configured */ - .driveStrength = kPORT_LowDriveStrength, - /* Normal drive strength is configured */ - .driveStrength1 = kPORT_NormalDriveStrength, - /* Pin is configured as P1_29 */ - .mux = kPORT_MuxAlt0, - /* Digital input enabled */ - .inputBuffer = kPORT_InputBufferEnable, - /* Digital input is not inverted */ - .invertInput = kPORT_InputNormal, - /* Pin Control Register fields [15:0] are not locked */ - .lockRegister = kPORT_UnlockRegister}; - /* PORT1_29 (pin 8) is configured as P1_29 */ - PORT_SetPinConfig(BOARD_INITBUTTONSPINS_SW1_PORT, BOARD_INITBUTTONSPINS_SW1_PIN, &SW1); - - const port_pin_config_t SW3 = {/* Internal pull-up/down resistor is disabled */ - .pullSelect = kPORT_PullDisable, - /* Low internal pull resistor value is selected. */ - .pullValueSelect = kPORT_LowPullResistor, - /* Fast slew rate is configured */ - .slewRate = kPORT_FastSlewRate, - /* Passive input filter is disabled */ - .passiveFilterEnable = kPORT_PassiveFilterDisable, - /* Open drain output is disabled */ - .openDrainEnable = kPORT_OpenDrainDisable, - /* Low drive strength is configured */ - .driveStrength = kPORT_LowDriveStrength, - /* Normal drive strength is configured */ - .driveStrength1 = kPORT_NormalDriveStrength, - /* Pin is configured as P1_7 */ - .mux = kPORT_MuxAlt0, - /* Digital input enabled */ - .inputBuffer = kPORT_InputBufferEnable, - /* Digital input is not inverted */ - .invertInput = kPORT_InputNormal, - /* Pin Control Register fields [15:0] are not locked */ - .lockRegister = kPORT_UnlockRegister}; - /* PORT1_7 (pin 1) is configured as P1_7 */ - PORT_SetPinConfig(BOARD_INITBUTTONSPINS_SW3_PORT, BOARD_INITBUTTONSPINS_SW3_PIN, &SW3); - - const port_pin_config_t ISP = {/* Internal pull-up resistor is enabled */ - .pullSelect = kPORT_PullUp, - /* Low internal pull resistor value is selected. */ - .pullValueSelect = kPORT_LowPullResistor, - /* Fast slew rate is configured */ - .slewRate = kPORT_FastSlewRate, - /* Passive input filter is disabled */ - .passiveFilterEnable = kPORT_PassiveFilterDisable, - /* Open drain output is disabled */ - .openDrainEnable = kPORT_OpenDrainDisable, - /* Low drive strength is configured */ - .driveStrength = kPORT_LowDriveStrength, - /* Normal drive strength is configured */ - .driveStrength1 = kPORT_NormalDriveStrength, - /* Pin is configured as P3_29 */ - .mux = kPORT_MuxAlt0, - /* Digital input enabled */ - .inputBuffer = kPORT_InputBufferEnable, - /* Digital input is not inverted */ - .invertInput = kPORT_InputNormal, - /* Pin Control Register fields [15:0] are not locked */ - .lockRegister = kPORT_UnlockRegister}; - /* PORT3_29 (pin 32) is configured as P3_29 */ - PORT_SetPinConfig(BOARD_INITBUTTONSPINS_ISP_PORT, BOARD_INITBUTTONSPINS_ISP_PIN, &ISP); -} -/*********************************************************************************************************************** - * EOF - **********************************************************************************************************************/ diff --git a/hw/bsp/mcx/boards/frdm_mcxa153/board/pin_mux.h b/hw/bsp/mcx/boards/frdm_mcxa153/board/pin_mux.h deleted file mode 100644 index 4a42f266d..000000000 --- a/hw/bsp/mcx/boards/frdm_mcxa153/board/pin_mux.h +++ /dev/null @@ -1,211 +0,0 @@ -/* - * Copyright 2025 NXP - * All rights reserved. - * - * SPDX-License-Identifier: BSD-3-Clause - */ - -/*********************************************************************************************************************** - * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file - * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. - **********************************************************************************************************************/ - -#ifndef _PIN_MUX_H_ -#define _PIN_MUX_H_ - -/*! - * @addtogroup pin_mux - * @{ - */ - -/*********************************************************************************************************************** - * API - **********************************************************************************************************************/ - -#if defined(__cplusplus) -extern "C" { -#endif - -/*! - * @brief Calls initialization functions. - * - */ -void BOARD_InitBootPins(void); - -/*! @name PORT0_2 (number 51), P0_2/SWO/J25[3]/J18[6] - @{ */ - -/* Symbols to be used with PORT driver */ -#define BOARD_INITDEBUG_UARTPINS_DEBUG_UART_RX_PORT PORT0 /*!<@brief PORT peripheral base pointer */ -#define BOARD_INITDEBUG_UARTPINS_DEBUG_UART_RX_PIN 2U /*!<@brief PORT pin number */ -#define BOARD_INITDEBUG_UARTPINS_DEBUG_UART_RX_PIN_MASK (1U << 2U) /*!<@brief PORT pin mask */ - /* @} */ - -/*! @name PORT0_3 (number 52), P0_3/J25[1]/J18[8] - @{ */ - -/* Symbols to be used with PORT driver */ -#define BOARD_INITDEBUG_UARTPINS_DEBUG_UART_TX_PORT PORT0 /*!<@brief PORT peripheral base pointer */ -#define BOARD_INITDEBUG_UARTPINS_DEBUG_UART_TX_PIN 3U /*!<@brief PORT pin number */ -#define BOARD_INITDEBUG_UARTPINS_DEBUG_UART_TX_PIN_MASK (1U << 3U) /*!<@brief PORT pin mask */ - /* @} */ - -/*! - * @brief Configures pin routing and optionally pin electrical features. - * - */ -void BOARD_InitDEBUG_UARTPins(void); - -/*! @name PORT0_1 (number 50), P0_1/SWCLK/JP10[2]/J18[4] - @{ */ - -/* Symbols to be used with PORT driver */ -#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDCLK_PORT PORT0 /*!<@brief PORT peripheral base pointer */ -#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDCLK_PIN 1U /*!<@brief PORT pin number */ -#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDCLK_PIN_MASK (1U << 1U) /*!<@brief PORT pin mask */ - /* @} */ - -/*! @name PORT0_0 (number 49), P0_0/SWDIO/J18[2] - @{ */ - -/* Symbols to be used with PORT driver */ -#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDIO_PORT PORT0 /*!<@brief PORT peripheral base pointer */ -#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDIO_PIN 0U /*!<@brief PORT pin number */ -#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDIO_PIN_MASK (1U << 0U) /*!<@brief PORT pin mask */ - /* @} */ - -/*! @name PORT0_2 (number 51), P0_2/SWO/J25[3]/J18[6] - @{ */ - -/* Symbols to be used with PORT driver */ -#define BOARD_INITSWD_DEBUGPINS_DEBUG_UART_RX_PORT PORT0 /*!<@brief PORT peripheral base pointer */ -#define BOARD_INITSWD_DEBUGPINS_DEBUG_UART_RX_PIN 2U /*!<@brief PORT pin number */ -#define BOARD_INITSWD_DEBUGPINS_DEBUG_UART_RX_PIN_MASK (1U << 2U) /*!<@brief PORT pin mask */ - /* @} */ - -/*! - * @brief Configures pin routing and optionally pin electrical features. - * - */ -void BOARD_InitSWD_DEBUGPins(void); - -#define PCR_DSE_dse0 0x00u /*!<@brief Drive Strength Enable: Low */ -#define PCR_IBE_ibe1 0x01u /*!<@brief Input Buffer Enable: Enables */ -#define PCR_INV_inv0 0x00u /*!<@brief Invert Input: Does not invert */ -#define PCR_ODE_ode0 0x00u /*!<@brief Open Drain Enable: Disables */ -#define PCR_PE_pe0 0x00u /*!<@brief Pull Enable: Disables */ -#define PCR_PFE_pfe0 0x00u /*!<@brief Passive Filter Enable: Disables */ -#define PCR_PS_ps1 0x01u /*!<@brief Pull Select: Enables internal pullup resistor */ -#define PCR_SRE_sre0 0x00u /*!<@brief Slew Rate Enable: Fast */ - -/*! @name PORT3_13 (number 37), P3_13/J1[14] - @{ */ - -/* Symbols to be used with GPIO driver */ -#define BOARD_INITLEDSPINS_LED_GREEN_GPIO GPIO3 /*!<@brief GPIO peripheral base pointer */ -#define BOARD_INITLEDSPINS_LED_GREEN_INIT_GPIO_VALUE 1U /*!<@brief GPIO output initial state */ -#define BOARD_INITLEDSPINS_LED_GREEN_GPIO_PIN 13U /*!<@brief GPIO pin number */ -#define BOARD_INITLEDSPINS_LED_GREEN_GPIO_PIN_MASK (1U << 13U) /*!<@brief GPIO pin mask */ - -/* Symbols to be used with PORT driver */ -#define BOARD_INITLEDSPINS_LED_GREEN_PORT PORT3 /*!<@brief PORT peripheral base pointer */ -#define BOARD_INITLEDSPINS_LED_GREEN_PIN 13U /*!<@brief PORT pin number */ -#define BOARD_INITLEDSPINS_LED_GREEN_PIN_MASK (1U << 13U) /*!<@brief PORT pin mask */ - /* @} */ - -/*! @name PORT3_12 (number 38), P3_12/J1[12]/J5[1] - @{ */ - -/* Symbols to be used with GPIO driver */ -#define BOARD_INITLEDSPINS_LED_RED_GPIO GPIO3 /*!<@brief GPIO peripheral base pointer */ -#define BOARD_INITLEDSPINS_LED_RED_INIT_GPIO_VALUE 1U /*!<@brief GPIO output initial state */ -#define BOARD_INITLEDSPINS_LED_RED_GPIO_PIN 12U /*!<@brief GPIO pin number */ -#define BOARD_INITLEDSPINS_LED_RED_GPIO_PIN_MASK (1U << 12U) /*!<@brief GPIO pin mask */ - -/* Symbols to be used with PORT driver */ -#define BOARD_INITLEDSPINS_LED_RED_PORT PORT3 /*!<@brief PORT peripheral base pointer */ -#define BOARD_INITLEDSPINS_LED_RED_PIN 12U /*!<@brief PORT pin number */ -#define BOARD_INITLEDSPINS_LED_RED_PIN_MASK (1U << 12U) /*!<@brief PORT pin mask */ - /* @} */ - -/*! @name PORT3_0 (number 46), P3_0/J1[8] - @{ */ - -/* Symbols to be used with GPIO driver */ -#define BOARD_INITLEDSPINS_LED_BLUE_GPIO GPIO3 /*!<@brief GPIO peripheral base pointer */ -#define BOARD_INITLEDSPINS_LED_BLUE_INIT_GPIO_VALUE 1U /*!<@brief GPIO output initial state */ -#define BOARD_INITLEDSPINS_LED_BLUE_GPIO_PIN 0U /*!<@brief GPIO pin number */ -#define BOARD_INITLEDSPINS_LED_BLUE_GPIO_PIN_MASK (1U << 0U) /*!<@brief GPIO pin mask */ - -/* Symbols to be used with PORT driver */ -#define BOARD_INITLEDSPINS_LED_BLUE_PORT PORT3 /*!<@brief PORT peripheral base pointer */ -#define BOARD_INITLEDSPINS_LED_BLUE_PIN 0U /*!<@brief PORT pin number */ -#define BOARD_INITLEDSPINS_LED_BLUE_PIN_MASK (1U << 0U) /*!<@brief PORT pin mask */ - /* @} */ - -/*! - * @brief Configures pin routing and optionally pin electrical features. - * - */ -void BOARD_InitLEDsPins(void); - -/*! @name PORT1_7 (number 1), P1_7/J1[1] - @{ */ - -/* Symbols to be used with GPIO driver */ -#define BOARD_INITBUTTONSPINS_SW3_GPIO GPIO1 /*!<@brief GPIO peripheral base pointer */ -#define BOARD_INITBUTTONSPINS_SW3_GPIO_PIN 7U /*!<@brief GPIO pin number */ -#define BOARD_INITBUTTONSPINS_SW3_GPIO_PIN_MASK (1U << 7U) /*!<@brief GPIO pin mask */ - -/* Symbols to be used with PORT driver */ -#define BOARD_INITBUTTONSPINS_SW3_PORT PORT1 /*!<@brief PORT peripheral base pointer */ -#define BOARD_INITBUTTONSPINS_SW3_PIN 7U /*!<@brief PORT pin number */ -#define BOARD_INITBUTTONSPINS_SW3_PIN_MASK (1U << 7U) /*!<@brief PORT pin mask */ - /* @} */ - -/*! @name PORT1_29 (number 8), P1_29/J3[6]/J18[10] - @{ */ - -/* Symbols to be used with GPIO driver */ -#define BOARD_INITBUTTONSPINS_SW1_GPIO GPIO1 /*!<@brief GPIO peripheral base pointer */ -#define BOARD_INITBUTTONSPINS_SW1_GPIO_PIN 29U /*!<@brief GPIO pin number */ -#define BOARD_INITBUTTONSPINS_SW1_GPIO_PIN_MASK (1U << 29U) /*!<@brief GPIO pin mask */ - -/* Symbols to be used with PORT driver */ -#define BOARD_INITBUTTONSPINS_SW1_PORT PORT1 /*!<@brief PORT peripheral base pointer */ -#define BOARD_INITBUTTONSPINS_SW1_PIN 29U /*!<@brief PORT pin number */ -#define BOARD_INITBUTTONSPINS_SW1_PIN_MASK (1U << 29U) /*!<@brief PORT pin mask */ - /* @} */ - -/*! @name PORT3_29 (number 32), P3_29/J18[7]/J4[11] - @{ */ - -/* Symbols to be used with GPIO driver */ -#define BOARD_INITBUTTONSPINS_ISP_GPIO GPIO3 /*!<@brief GPIO peripheral base pointer */ -#define BOARD_INITBUTTONSPINS_ISP_GPIO_PIN 29U /*!<@brief GPIO pin number */ -#define BOARD_INITBUTTONSPINS_ISP_GPIO_PIN_MASK (1U << 29U) /*!<@brief GPIO pin mask */ - -/* Symbols to be used with PORT driver */ -#define BOARD_INITBUTTONSPINS_ISP_PORT PORT3 /*!<@brief PORT peripheral base pointer */ -#define BOARD_INITBUTTONSPINS_ISP_PIN 29U /*!<@brief PORT pin number */ -#define BOARD_INITBUTTONSPINS_ISP_PIN_MASK (1U << 29U) /*!<@brief PORT pin mask */ - /* @} */ - -/*! - * @brief Configures pin routing and optionally pin electrical features. - * - */ -void BOARD_InitBUTTONsPins(void); - -#if defined(__cplusplus) -} -#endif - -/*! - * @} - */ -#endif /* _PIN_MUX_H_ */ - -/*********************************************************************************************************************** - * EOF - **********************************************************************************************************************/ diff --git a/hw/bsp/mcx/boards/frdm_mcxa153/clock_config.c b/hw/bsp/mcx/boards/frdm_mcxa153/clock_config.c new file mode 100644 index 000000000..599110d7a --- /dev/null +++ b/hw/bsp/mcx/boards/frdm_mcxa153/clock_config.c @@ -0,0 +1,559 @@ +/* + * Copyright 2025 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +/*********************************************************************************************************************** + * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file + * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. + **********************************************************************************************************************/ +/* + * How to setup clock using clock driver functions: + * + * 1. Setup clock sources. + * + * 2. Set up wait states of the flash. + * + * 3. Set up all dividers. + * + * 4. Set up all selectors to provide selected clocks. + * + */ + +/* clang-format off */ +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!GlobalInfo +product: Clocks v18.0 +processor: MCXA153 +package_id: MCXA153VLH +mcu_data: ksdk2_0 +processor_version: 25.09.10 +board: FRDM-MCXA153 + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ +/* clang-format on */ + +#include "fsl_clock.h" +#include "clock_config.h" +#include "fsl_spc.h" + +/******************************************************************************* + * Definitions + ******************************************************************************/ + +/******************************************************************************* + * Variables + ******************************************************************************/ +/* System clock frequency. */ +extern uint32_t SystemCoreClock; + +/******************************************************************************* + ************************ BOARD_InitBootClocks function ************************ + ******************************************************************************/ +void BOARD_InitBootClocks(void) +{ + BOARD_BootClockFRO96M(); +} + +/******************************************************************************* + ******************** Configuration BOARD_BootClockFRO12M ********************** + ******************************************************************************/ +/* clang-format off */ +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!Configuration +name: BOARD_BootClockFRO12M +outputs: +- {id: CLK_1M_clock.outFreq, value: 1 MHz} +- {id: CPU_clock.outFreq, value: 12 MHz} +- {id: FRO_12M_clock.outFreq, value: 12 MHz} +- {id: MAIN_clock.outFreq, value: 12 MHz} +- {id: Slow_clock.outFreq, value: 3 MHz} +- {id: System_clock.outFreq, value: 12 MHz} +- {id: TRACE_clock.outFreq, value: 12 MHz} +- {id: UTICK_clock.outFreq, value: 1 MHz} +- {id: WWDT0_clock.outFreq, value: 1 MHz} +settings: +- {id: SCGMode, value: SIRC} +- {id: MRCC.FREQMEREFCLKSEL.sel, value: MRCC.aoi0_out0} +- {id: MRCC.FREQMETARGETCLKSEL.sel, value: MRCC.aoi0_out0} +- {id: MRCC.OSTIMERCLKSEL.sel, value: VBAT.CLK16K_1} +- {id: SCG.SCSSEL.sel, value: SCG.SIRC} +- {id: SCG_FIRCCSR_FIRCEN_CFG, value: Disabled} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ +/* clang-format on */ + +/******************************************************************************* + * Variables for BOARD_BootClockFRO12M configuration + ******************************************************************************/ +/******************************************************************************* + * Code for BOARD_BootClockFRO12M configuration + ******************************************************************************/ +void BOARD_BootClockFRO12M(void) +{ + uint32_t coreFreq; + spc_active_mode_core_ldo_option_t ldoOption; + spc_sram_voltage_config_t sramOption; + + /* Get the CPU Core frequency */ + coreFreq = CLOCK_GetCoreSysClkFreq(); + + /* The flow of increasing voltage and frequency */ + if (coreFreq <= BOARD_BOOTCLOCKFRO12M_CORE_CLOCK) { + /* Set the LDO_CORE VDD regulator level */ + ldoOption.CoreLDOVoltage = kSPC_CoreLDO_MidDriveVoltage; + ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength; + (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption); + /* Configure Flash to support different voltage level and frequency */ + FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x0U)); + /* Specifies the operating voltage for the SRAM's read/write timing margin */ + sramOption.operateVoltage = kSPC_sramOperateAt1P0V; + sramOption.requestVoltageUpdate = true; + (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption); + } + + + /*!< Set up system dividers */ + CLOCK_SetClockDiv(kCLOCK_DivAHBCLK, 1U); /* !< Set AHBCLKDIV divider to value 1 */ + CLOCK_SetupFRO12MClocking(); /*!< Setup FRO12M clock */ + + CLOCK_AttachClk(kFRO12M_to_MAIN_CLK); /* !< Switch MAIN_CLK to FRO12M */ + + /* The flow of decreasing voltage and frequency */ + if (coreFreq > BOARD_BOOTCLOCKFRO12M_CORE_CLOCK) { + /* Configure Flash to support different voltage level and frequency */ + FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x0U)); + /* Specifies the operating voltage for the SRAM's read/write timing margin */ + sramOption.operateVoltage = kSPC_sramOperateAt1P0V; + sramOption.requestVoltageUpdate = true; + (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption); + /* Set the LDO_CORE VDD regulator level */ + ldoOption.CoreLDOVoltage = kSPC_CoreLDO_MidDriveVoltage; + ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength; + (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption); + } + + /*!< Set up clock selectors - Attach clocks to the peripheries */ + CLOCK_AttachClk(kCPU_CLK_to_TRACE); /* !< Switch TRACE to CPU_CLK */ + + /*!< Set up dividers */ + CLOCK_SetClockDiv(kCLOCK_DivTRACE, 1U); /* !< Set TRACECLKDIV divider to value 1 */ + CLOCK_SetClockDiv(kCLOCK_DivWWDT0, 1U); /* !< Set WWDT0CLKDIV divider to value 1 */ + + /* Set SystemCoreClock variable */ + SystemCoreClock = BOARD_BOOTCLOCKFRO12M_CORE_CLOCK; +} +/******************************************************************************* + ******************** Configuration BOARD_BootClockFRO24M ********************** + ******************************************************************************/ +/* clang-format off */ +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!Configuration +name: BOARD_BootClockFRO24M +outputs: +- {id: CLK_1M_clock.outFreq, value: 1 MHz} +- {id: CLK_48M_clock.outFreq, value: 48 MHz} +- {id: CPU_clock.outFreq, value: 24 MHz} +- {id: FRO_12M_clock.outFreq, value: 12 MHz} +- {id: FRO_HF_DIV_clock.outFreq, value: 48 MHz} +- {id: FRO_HF_clock.outFreq, value: 48 MHz} +- {id: MAIN_clock.outFreq, value: 48 MHz} +- {id: Slow_clock.outFreq, value: 6 MHz} +- {id: System_clock.outFreq, value: 24 MHz} +- {id: TRACE_clock.outFreq, value: 24 MHz} +- {id: UTICK_clock.outFreq, value: 1 MHz} +- {id: WWDT0_clock.outFreq, value: 1 MHz} +settings: +- {id: MRCC.FREQMEREFCLKSEL.sel, value: MRCC.aoi0_out0} +- {id: MRCC.FREQMETARGETCLKSEL.sel, value: MRCC.aoi0_out0} +- {id: MRCC.OSTIMERCLKSEL.sel, value: VBAT.CLK16K_1} +- {id: SYSCON.AHBCLKDIV.scale, value: '2'} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ +/* clang-format on */ + +/******************************************************************************* + * Variables for BOARD_BootClockFRO24M configuration + ******************************************************************************/ +/******************************************************************************* + * Code for BOARD_BootClockFRO24M configuration + ******************************************************************************/ +void BOARD_BootClockFRO24M(void) +{ + uint32_t coreFreq; + spc_active_mode_core_ldo_option_t ldoOption; + spc_sram_voltage_config_t sramOption; + + /* Get the CPU Core frequency */ + coreFreq = CLOCK_GetCoreSysClkFreq(); + + /* The flow of increasing voltage and frequency */ + if (coreFreq <= BOARD_BOOTCLOCKFRO24M_CORE_CLOCK) { + /* Set the LDO_CORE VDD regulator level */ + ldoOption.CoreLDOVoltage = kSPC_CoreLDO_MidDriveVoltage; + ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength; + (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption); + /* Configure Flash to support different voltage level and frequency */ + FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x0U)); + /* Specifies the operating voltage for the SRAM's read/write timing margin */ + sramOption.operateVoltage = kSPC_sramOperateAt1P0V; + sramOption.requestVoltageUpdate = true; + (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption); + } + + + /*!< Set up system dividers */ + CLOCK_SetClockDiv(kCLOCK_DivAHBCLK, 2U); /* !< Set AHBCLKDIV divider to value 2 */ + CLOCK_SetClockDiv(kCLOCK_DivFRO_HF_DIV, 1U); /* !< Set FROHFDIV divider to value 1 */ + + CLOCK_SetupFROHFClocking(48000000U); /*!< Enable FRO HF(48MHz) output */ + + CLOCK_SetupFRO12MClocking(); /*!< Setup FRO12M clock */ + + CLOCK_AttachClk(kFRO_HF_to_MAIN_CLK); /* !< Switch MAIN_CLK to FRO_HF */ + + /* The flow of decreasing voltage and frequency */ + if (coreFreq > BOARD_BOOTCLOCKFRO24M_CORE_CLOCK) { + /* Configure Flash to support different voltage level and frequency */ + FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x0U)); + /* Specifies the operating voltage for the SRAM's read/write timing margin */ + sramOption.operateVoltage = kSPC_sramOperateAt1P0V; + sramOption.requestVoltageUpdate = true; + (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption); + /* Set the LDO_CORE VDD regulator level */ + ldoOption.CoreLDOVoltage = kSPC_CoreLDO_MidDriveVoltage; + ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength; + (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption); + } + + /*!< Set up clock selectors - Attach clocks to the peripheries */ + CLOCK_AttachClk(kCPU_CLK_to_TRACE); /* !< Switch TRACE to CPU_CLK */ + CLOCK_AttachClk(kFRO_HF_DIV_to_LPSPI0); /* !< Switch LPSPI0 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_LPSPI1); /* !< Switch LPSPI1 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_LPI2C0); /* !< Switch LPI2C0 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_LPUART0); /* !< Switch LPUART0 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_LPUART1); /* !< Switch LPUART1 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_LPUART2); /* !< Switch LPUART2 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_LPTMR0); /* !< Switch LPTMR0 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_I3C0FCLK); /* !< Switch I3C0FCLK to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_CMP0); /* !< Switch CMP0 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_CMP1); /* !< Switch CMP1 to FRO_HF_DIV */ + + /*!< Set up dividers */ + CLOCK_SetClockDiv(kCLOCK_DivTRACE, 1U); /* !< Set TRACECLKDIV divider to value 1 */ + CLOCK_SetClockDiv(kCLOCK_DivWWDT0, 1U); /* !< Set WWDT0CLKDIV divider to value 1 */ + + /* Set SystemCoreClock variable */ + SystemCoreClock = BOARD_BOOTCLOCKFRO24M_CORE_CLOCK; +} +/******************************************************************************* + ******************** Configuration BOARD_BootClockFRO48M ********************** + ******************************************************************************/ +/* clang-format off */ +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!Configuration +name: BOARD_BootClockFRO48M +outputs: +- {id: CLK_1M_clock.outFreq, value: 1 MHz} +- {id: CLK_48M_clock.outFreq, value: 48 MHz} +- {id: CPU_clock.outFreq, value: 48 MHz} +- {id: FRO_12M_clock.outFreq, value: 12 MHz} +- {id: FRO_HF_DIV_clock.outFreq, value: 48 MHz} +- {id: FRO_HF_clock.outFreq, value: 48 MHz} +- {id: MAIN_clock.outFreq, value: 48 MHz} +- {id: Slow_clock.outFreq, value: 12 MHz} +- {id: System_clock.outFreq, value: 48 MHz} +- {id: TRACE_clock.outFreq, value: 48 MHz} +- {id: UTICK_clock.outFreq, value: 1 MHz} +- {id: WWDT0_clock.outFreq, value: 1 MHz} +settings: +- {id: MRCC.FREQMEREFCLKSEL.sel, value: MRCC.aoi0_out0} +- {id: MRCC.FREQMETARGETCLKSEL.sel, value: MRCC.aoi0_out0} +- {id: MRCC.OSTIMERCLKSEL.sel, value: VBAT.CLK16K_1} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ +/* clang-format on */ + +/******************************************************************************* + * Variables for BOARD_BootClockFRO48M configuration + ******************************************************************************/ +/******************************************************************************* + * Code for BOARD_BootClockFRO48M configuration + ******************************************************************************/ +void BOARD_BootClockFRO48M(void) +{ + uint32_t coreFreq; + spc_active_mode_core_ldo_option_t ldoOption; + spc_sram_voltage_config_t sramOption; + + /* Get the CPU Core frequency */ + coreFreq = CLOCK_GetCoreSysClkFreq(); + + /* The flow of increasing voltage and frequency */ + if (coreFreq <= BOARD_BOOTCLOCKFRO48M_CORE_CLOCK) { + /* Set the LDO_CORE VDD regulator level */ + ldoOption.CoreLDOVoltage = kSPC_CoreLDO_MidDriveVoltage; + ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength; + (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption); + /* Configure Flash to support different voltage level and frequency */ + FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x1U)); + /* Specifies the operating voltage for the SRAM's read/write timing margin */ + sramOption.operateVoltage = kSPC_sramOperateAt1P0V; + sramOption.requestVoltageUpdate = true; + (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption); + } + + + /*!< Set up system dividers */ + CLOCK_SetClockDiv(kCLOCK_DivAHBCLK, 1U); /* !< Set AHBCLKDIV divider to value 1 */ + CLOCK_SetClockDiv(kCLOCK_DivFRO_HF_DIV, 1U); /* !< Set FROHFDIV divider to value 1 */ + + CLOCK_SetupFROHFClocking(48000000U); /*!< Enable FRO HF(48MHz) output */ + + CLOCK_SetupFRO12MClocking(); /*!< Setup FRO12M clock */ + + CLOCK_AttachClk(kFRO_HF_to_MAIN_CLK); /* !< Switch MAIN_CLK to FRO_HF */ + + /* The flow of decreasing voltage and frequency */ + if (coreFreq > BOARD_BOOTCLOCKFRO48M_CORE_CLOCK) { + /* Configure Flash to support different voltage level and frequency */ + FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x1U)); + /* Specifies the operating voltage for the SRAM's read/write timing margin */ + sramOption.operateVoltage = kSPC_sramOperateAt1P0V; + sramOption.requestVoltageUpdate = true; + (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption); + /* Set the LDO_CORE VDD regulator level */ + ldoOption.CoreLDOVoltage = kSPC_CoreLDO_MidDriveVoltage; + ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength; + (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption); + } + + /*!< Set up clock selectors - Attach clocks to the peripheries */ + CLOCK_AttachClk(kCPU_CLK_to_TRACE); /* !< Switch TRACE to CPU_CLK */ + CLOCK_AttachClk(kFRO_HF_DIV_to_LPSPI0); /* !< Switch LPSPI0 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_LPSPI1); /* !< Switch LPSPI1 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_LPI2C0); /* !< Switch LPI2C0 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_LPUART0); /* !< Switch LPUART0 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_LPUART1); /* !< Switch LPUART1 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_LPUART2); /* !< Switch LPUART2 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_LPTMR0); /* !< Switch LPTMR0 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_I3C0FCLK); /* !< Switch I3C0FCLK to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_CMP0); /* !< Switch CMP0 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_CMP1); /* !< Switch CMP1 to FRO_HF_DIV */ + + /*!< Set up dividers */ + CLOCK_SetClockDiv(kCLOCK_DivTRACE, 1U); /* !< Set TRACECLKDIV divider to value 1 */ + CLOCK_SetClockDiv(kCLOCK_DivWWDT0, 1U); /* !< Set WWDT0CLKDIV divider to value 1 */ + + /* Set SystemCoreClock variable */ + SystemCoreClock = BOARD_BOOTCLOCKFRO48M_CORE_CLOCK; +} +/******************************************************************************* + ******************** Configuration BOARD_BootClockFRO64M ********************** + ******************************************************************************/ +/* clang-format off */ +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!Configuration +name: BOARD_BootClockFRO64M +outputs: +- {id: CLK_1M_clock.outFreq, value: 1 MHz} +- {id: CLK_48M_clock.outFreq, value: 48 MHz} +- {id: CPU_clock.outFreq, value: 64 MHz} +- {id: FRO_12M_clock.outFreq, value: 12 MHz} +- {id: FRO_HF_DIV_clock.outFreq, value: 64 MHz} +- {id: FRO_HF_clock.outFreq, value: 64 MHz} +- {id: MAIN_clock.outFreq, value: 64 MHz} +- {id: Slow_clock.outFreq, value: 16 MHz} +- {id: System_clock.outFreq, value: 64 MHz} +- {id: TRACE_clock.outFreq, value: 64 MHz} +- {id: UTICK_clock.outFreq, value: 1 MHz} +- {id: WWDT0_clock.outFreq, value: 1 MHz} +settings: +- {id: VDD_CORE, value: voltage_1v1} +- {id: MRCC.FREQMEREFCLKSEL.sel, value: MRCC.aoi0_out0} +- {id: MRCC.FREQMETARGETCLKSEL.sel, value: MRCC.aoi0_out0} +- {id: MRCC.FROHFDIV.scale, value: '1', locked: true} +- {id: MRCC.OSTIMERCLKSEL.sel, value: VBAT.CLK16K_1} +- {id: SYSCON.AHBCLKDIV.scale, value: '1', locked: true} +sources: +- {id: SCG.FIRC.outFreq, value: 64 MHz} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ +/* clang-format on */ + +/******************************************************************************* + * Variables for BOARD_BootClockFRO64M configuration + ******************************************************************************/ +/******************************************************************************* + * Code for BOARD_BootClockFRO64M configuration + ******************************************************************************/ +void BOARD_BootClockFRO64M(void) +{ + uint32_t coreFreq; + spc_active_mode_core_ldo_option_t ldoOption; + spc_sram_voltage_config_t sramOption; + + /* Get the CPU Core frequency */ + coreFreq = CLOCK_GetCoreSysClkFreq(); + + /* The flow of increasing voltage and frequency */ + if (coreFreq <= BOARD_BOOTCLOCKFRO64M_CORE_CLOCK) { + /* Set the LDO_CORE VDD regulator level */ + ldoOption.CoreLDOVoltage = kSPC_CoreLDO_NormalVoltage; + ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength; + (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption); + /* Configure Flash to support different voltage level and frequency */ + FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x1U)); + /* Specifies the operating voltage for the SRAM's read/write timing margin */ + sramOption.operateVoltage = kSPC_sramOperateAt1P1V; + sramOption.requestVoltageUpdate = true; + (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption); + } + + + /*!< Set up system dividers */ + CLOCK_SetClockDiv(kCLOCK_DivAHBCLK, 1U); /* !< Set AHBCLKDIV divider to value 1 */ + CLOCK_SetClockDiv(kCLOCK_DivFRO_HF_DIV, 1U); /* !< Set FROHFDIV divider to value 1 */ + + CLOCK_SetupFROHFClocking(64000000U); /*!< Enable FRO HF(64MHz) output */ + + CLOCK_SetupFRO12MClocking(); /*!< Setup FRO12M clock */ + + CLOCK_AttachClk(kFRO_HF_to_MAIN_CLK); /* !< Switch MAIN_CLK to FRO_HF */ + + /* The flow of decreasing voltage and frequency */ + if (coreFreq > BOARD_BOOTCLOCKFRO64M_CORE_CLOCK) { + /* Configure Flash to support different voltage level and frequency */ + FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x1U)); + /* Specifies the operating voltage for the SRAM's read/write timing margin */ + sramOption.operateVoltage = kSPC_sramOperateAt1P1V; + sramOption.requestVoltageUpdate = true; + (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption); + /* Set the LDO_CORE VDD regulator level */ + ldoOption.CoreLDOVoltage = kSPC_CoreLDO_NormalVoltage; + ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength; + (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption); + } + + /*!< Set up clock selectors - Attach clocks to the peripheries */ + CLOCK_AttachClk(kCPU_CLK_to_TRACE); /* !< Switch TRACE to CPU_CLK */ + CLOCK_AttachClk(kFRO_HF_DIV_to_LPSPI0); /* !< Switch LPSPI0 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_LPSPI1); /* !< Switch LPSPI1 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_LPI2C0); /* !< Switch LPI2C0 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_LPUART0); /* !< Switch LPUART0 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_LPUART1); /* !< Switch LPUART1 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_LPUART2); /* !< Switch LPUART2 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_LPTMR0); /* !< Switch LPTMR0 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_I3C0FCLK); /* !< Switch I3C0FCLK to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_CMP0); /* !< Switch CMP0 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_CMP1); /* !< Switch CMP1 to FRO_HF_DIV */ + + /*!< Set up dividers */ + CLOCK_SetClockDiv(kCLOCK_DivTRACE, 1U); /* !< Set TRACECLKDIV divider to value 1 */ + CLOCK_SetClockDiv(kCLOCK_DivWWDT0, 1U); /* !< Set WWDT0CLKDIV divider to value 1 */ + + /* Set SystemCoreClock variable */ + SystemCoreClock = BOARD_BOOTCLOCKFRO64M_CORE_CLOCK; +} +/******************************************************************************* + ******************** Configuration BOARD_BootClockFRO96M ********************** + ******************************************************************************/ +/* clang-format off */ +/* TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!Configuration +name: BOARD_BootClockFRO96M +called_from_default_init: true +outputs: +- {id: CLK_1M_clock.outFreq, value: 1 MHz} +- {id: CLK_48M_clock.outFreq, value: 48 MHz} +- {id: CPU_clock.outFreq, value: 96 MHz} +- {id: FRO_12M_clock.outFreq, value: 12 MHz} +- {id: FRO_HF_DIV_clock.outFreq, value: 96 MHz} +- {id: FRO_HF_clock.outFreq, value: 96 MHz} +- {id: MAIN_clock.outFreq, value: 96 MHz} +- {id: Slow_clock.outFreq, value: 24 MHz} +- {id: System_clock.outFreq, value: 96 MHz} +- {id: TRACE_clock.outFreq, value: 96 MHz} +- {id: UTICK_clock.outFreq, value: 1 MHz} +- {id: WWDT0_clock.outFreq, value: 1 MHz} +settings: +- {id: VDD_CORE, value: voltage_1v1} +- {id: MRCC.FREQMEREFCLKSEL.sel, value: MRCC.aoi0_out0} +- {id: MRCC.FREQMETARGETCLKSEL.sel, value: MRCC.aoi0_out0} +- {id: MRCC.OSTIMERCLKSEL.sel, value: VBAT.CLK16K_1} +sources: +- {id: SCG.FIRC.outFreq, value: 96 MHz} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS **********/ +/* clang-format on */ + +/******************************************************************************* + * Variables for BOARD_BootClockFRO96M configuration + ******************************************************************************/ +/******************************************************************************* + * Code for BOARD_BootClockFRO96M configuration + ******************************************************************************/ +void BOARD_BootClockFRO96M(void) +{ + uint32_t coreFreq; + spc_active_mode_core_ldo_option_t ldoOption; + spc_sram_voltage_config_t sramOption; + + /* Get the CPU Core frequency */ + coreFreq = CLOCK_GetCoreSysClkFreq(); + + /* The flow of increasing voltage and frequency */ + if (coreFreq <= BOARD_BOOTCLOCKFRO96M_CORE_CLOCK) { + /* Set the LDO_CORE VDD regulator level */ + ldoOption.CoreLDOVoltage = kSPC_CoreLDO_NormalVoltage; + ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength; + (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption); + /* Configure Flash to support different voltage level and frequency */ + FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x2U)); + /* Specifies the operating voltage for the SRAM's read/write timing margin */ + sramOption.operateVoltage = kSPC_sramOperateAt1P1V; + sramOption.requestVoltageUpdate = true; + (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption); + } + + + /*!< Set up system dividers */ + CLOCK_SetClockDiv(kCLOCK_DivAHBCLK, 1U); /* !< Set AHBCLKDIV divider to value 1 */ + CLOCK_SetClockDiv(kCLOCK_DivFRO_HF_DIV, 1U); /* !< Set FROHFDIV divider to value 1 */ + + CLOCK_SetupFROHFClocking(96000000U); /*!< Enable FRO HF(96MHz) output */ + + CLOCK_SetupFRO12MClocking(); /*!< Setup FRO12M clock */ + + CLOCK_AttachClk(kFRO_HF_to_MAIN_CLK); /* !< Switch MAIN_CLK to FRO_HF */ + + /* The flow of decreasing voltage and frequency */ + if (coreFreq > BOARD_BOOTCLOCKFRO96M_CORE_CLOCK) { + /* Configure Flash to support different voltage level and frequency */ + FMU0->FCTRL = (FMU0->FCTRL & ~((uint32_t)FMU_FCTRL_RWSC_MASK)) | (FMU_FCTRL_RWSC(0x2U)); + /* Specifies the operating voltage for the SRAM's read/write timing margin */ + sramOption.operateVoltage = kSPC_sramOperateAt1P1V; + sramOption.requestVoltageUpdate = true; + (void)SPC_SetSRAMOperateVoltage(SPC0, &sramOption); + /* Set the LDO_CORE VDD regulator level */ + ldoOption.CoreLDOVoltage = kSPC_CoreLDO_NormalVoltage; + ldoOption.CoreLDODriveStrength = kSPC_CoreLDO_NormalDriveStrength; + (void)SPC_SetActiveModeCoreLDORegulatorConfig(SPC0, &ldoOption); + } + + /*!< Set up clock selectors - Attach clocks to the peripheries */ + CLOCK_AttachClk(kCPU_CLK_to_TRACE); /* !< Switch TRACE to CPU_CLK */ + CLOCK_AttachClk(kFRO_HF_DIV_to_LPSPI0); /* !< Switch LPSPI0 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_LPSPI1); /* !< Switch LPSPI1 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_LPI2C0); /* !< Switch LPI2C0 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_LPUART0); /* !< Switch LPUART0 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_LPUART1); /* !< Switch LPUART1 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_LPUART2); /* !< Switch LPUART2 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_LPTMR0); /* !< Switch LPTMR0 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_I3C0FCLK); /* !< Switch I3C0FCLK to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_CMP0); /* !< Switch CMP0 to FRO_HF_DIV */ + CLOCK_AttachClk(kFRO_HF_DIV_to_CMP1); /* !< Switch CMP1 to FRO_HF_DIV */ + + /*!< Set up dividers */ + CLOCK_SetClockDiv(kCLOCK_DivTRACE, 1U); /* !< Set TRACECLKDIV divider to value 1 */ + CLOCK_SetClockDiv(kCLOCK_DivWWDT0, 1U); /* !< Set WWDT0CLKDIV divider to value 1 */ + + /* Set SystemCoreClock variable */ + SystemCoreClock = BOARD_BOOTCLOCKFRO96M_CORE_CLOCK; +} diff --git a/hw/bsp/mcx/boards/frdm_mcxa153/clock_config.h b/hw/bsp/mcx/boards/frdm_mcxa153/clock_config.h new file mode 100644 index 000000000..d609eb468 --- /dev/null +++ b/hw/bsp/mcx/boards/frdm_mcxa153/clock_config.h @@ -0,0 +1,385 @@ +/* + * Copyright 2025 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +/*********************************************************************************************************************** + * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file + * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. + **********************************************************************************************************************/ + +#ifndef _CLOCK_CONFIG_H_ +#define _CLOCK_CONFIG_H_ + +#include "fsl_common.h" + +/******************************************************************************* + * Definitions + ******************************************************************************/ + +/******************************************************************************* + ************************ BOARD_InitBootClocks function ************************ + ******************************************************************************/ + +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus*/ + +/*! + * @brief This function executes default configuration of clocks. + * + */ +void BOARD_InitBootClocks(void); + +#if defined(__cplusplus) +} +#endif /* __cplusplus*/ + +/******************************************************************************* + ******************** Configuration BOARD_BootClockFRO12M ********************** + ******************************************************************************/ +/******************************************************************************* + * Definitions for BOARD_BootClockFRO12M configuration + ******************************************************************************/ +#define BOARD_BOOTCLOCKFRO12M_CORE_CLOCK 12000000U /*!< Core clock frequency: 12000000Hz */ + +/* Clock outputs (values are in Hz): */ +#define BOARD_BOOTCLOCKFRO12M_ADC0_CLOCK 0UL /* Clock consumers of ADC0_clock output : ADC0 */ +#define BOARD_BOOTCLOCKFRO12M_CLK16K_0_CLOCK 0UL /* Clock consumers of CLK16K_0_clock output : CMP0, WAKETIMER0, WUU0 */ +#define BOARD_BOOTCLOCKFRO12M_CLK16K_1_CLOCK 0UL /* Clock consumers of CLK16K_1_clock output : CMP1, LPTMR0, WAKETIMER0 */ +#define BOARD_BOOTCLOCKFRO12M_CLKOUT_CLOCK 0UL /* Clock consumers of CLKOUT_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO12M_CLK_1M_CLOCK 1000000UL /* Clock consumers of CLK_1M_clock output : CMC */ +#define BOARD_BOOTCLOCKFRO12M_CLK_48M_CLOCK 0UL /* Clock consumers of CLK_48M_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO12M_CLK_IN_CLOCK 0UL /* Clock consumers of CLK_IN_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO12M_CMP0FDIV_CLOCK 0UL /* Clock consumers of CMP0FDIV_clock output : CMP0 */ +#define BOARD_BOOTCLOCKFRO12M_CMP0RRDIV_CLOCK 0UL /* Clock consumers of CMP0RRDIV_clock output : CMP0 */ +#define BOARD_BOOTCLOCKFRO12M_CMP1FDIV_CLOCK 0UL /* Clock consumers of CMP1FDIV_clock output : CMP1 */ +#define BOARD_BOOTCLOCKFRO12M_CMP1RRDIV_CLOCK 0UL /* Clock consumers of CMP1RRDIV_clock output : CMP1 */ +#define BOARD_BOOTCLOCKFRO12M_CPU_CLOCK 12000000UL /* Clock consumers of CPU_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO12M_CTIMER0_CLOCK 0UL /* Clock consumers of CTIMER0_clock output : CTIMER0 */ +#define BOARD_BOOTCLOCKFRO12M_CTIMER1_CLOCK 0UL /* Clock consumers of CTIMER1_clock output : CTIMER1 */ +#define BOARD_BOOTCLOCKFRO12M_CTIMER2_CLOCK 0UL /* Clock consumers of CTIMER2_clock output : CTIMER2 */ +#define BOARD_BOOTCLOCKFRO12M_FREQME_REFERENCE_CLOCK 0UL /* Clock consumers of FREQME_reference_clock output : FREQME0 */ +#define BOARD_BOOTCLOCKFRO12M_FREQME_TARGET_CLOCK 0UL /* Clock consumers of FREQME_target_clock output : FREQME0 */ +#define BOARD_BOOTCLOCKFRO12M_FRO_12M_CLOCK 12000000UL /* Clock consumers of FRO_12M_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO12M_FRO_HF_DIV_CLOCK 0UL /* Clock consumers of FRO_HF_DIV_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO12M_FRO_HF_CLOCK 0UL /* Clock consumers of FRO_HF_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO12M_I3C_FCLK_CLOCK 0UL /* Clock consumers of I3C_FCLK_clock output : I3C0 */ +#define BOARD_BOOTCLOCKFRO12M_I3C_SLOW_TC_CLOCK 0UL /* Clock consumers of I3C_SLOW_TC_clock output : I3C0 */ +#define BOARD_BOOTCLOCKFRO12M_I3C_SLOW_CLOCK 0UL /* Clock consumers of I3C_SLOW_clock output : I3C0 */ +#define BOARD_BOOTCLOCKFRO12M_LPI2C0_CLOCK 0UL /* Clock consumers of LPI2C0_clock output : LPI2C0 */ +#define BOARD_BOOTCLOCKFRO12M_LPSPI0_CLOCK 0UL /* Clock consumers of LPSPI0_clock output : LPSPI0 */ +#define BOARD_BOOTCLOCKFRO12M_LPSPI1_CLOCK 0UL /* Clock consumers of LPSPI1_clock output : LPSPI1 */ +#define BOARD_BOOTCLOCKFRO12M_LPTMR0_CLOCK 0UL /* Clock consumers of LPTMR0_clock output : LPTMR0 */ +#define BOARD_BOOTCLOCKFRO12M_LPUART0_CLOCK 0UL /* Clock consumers of LPUART0_clock output : LPUART0 */ +#define BOARD_BOOTCLOCKFRO12M_LPUART1_CLOCK 0UL /* Clock consumers of LPUART1_clock output : LPUART1 */ +#define BOARD_BOOTCLOCKFRO12M_LPUART2_CLOCK 0UL /* Clock consumers of LPUART2_clock output : LPUART2 */ +#define BOARD_BOOTCLOCKFRO12M_MAIN_CLOCK 12000000UL /* Clock consumers of MAIN_clock output : FLEXPWM0 */ +#define BOARD_BOOTCLOCKFRO12M_OSTIMER_CLOCK 0UL /* Clock consumers of OSTIMER_clock output : OSTIMER0 */ +#define BOARD_BOOTCLOCKFRO12M_FIRC_TRIM_CLOCK 0UL /* Clock consumers of SCG.FIRC_TRIM_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO12M_SIRC_TRIM_CLOCK 0UL /* Clock consumers of SCG.SIRC_TRIM_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO12M_SLOW_CLOCK 3000000UL /* Clock consumers of Slow_clock output : AOI0, CMC, CMP0, LPTMR0, WAKETIMER0, WUU0 */ +#define BOARD_BOOTCLOCKFRO12M_SYSTEM_CLOCK 12000000UL /* Clock consumers of System_clock output : ADC0, CMP1, CTIMER0, CTIMER1, CTIMER2, DMA0, FLEXPWM0, FREQME0, GPIO0, GPIO1, GPIO2, GPIO3, I3C0, INPUTMUX0, LPI2C0, LPSPI0, LPSPI1, LPUART0, LPUART1, LPUART2, OSTIMER0, PORT0, PORT1, PORT2, PORT3, QDC0, SWD, SysTick, USB0, UTICK0, WWDT0 */ +#define BOARD_BOOTCLOCKFRO12M_TRACE_CLOCK 12000000UL /* Clock consumers of TRACE_clock output : SWD */ +#define BOARD_BOOTCLOCKFRO12M_USB0_CLOCK 0UL /* Clock consumers of USB0_clock output : USB0 */ +#define BOARD_BOOTCLOCKFRO12M_UTICK_CLOCK 1000000UL /* Clock consumers of UTICK_clock output : UTICK0 */ +#define BOARD_BOOTCLOCKFRO12M_WUU_CLOCK 0UL /* Clock consumers of WUU_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO12M_WWDT0_CLOCK 1000000UL /* Clock consumers of WWDT0_clock output : WWDT0 */ + + +/******************************************************************************* + * API for BOARD_BootClockFRO12M configuration + ******************************************************************************/ +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus*/ + +/*! + * @brief This function executes configuration of clocks. + * + */ +void BOARD_BootClockFRO12M(void); + +#if defined(__cplusplus) +} +#endif /* __cplusplus*/ + +/******************************************************************************* + ******************** Configuration BOARD_BootClockFRO24M ********************** + ******************************************************************************/ +/******************************************************************************* + * Definitions for BOARD_BootClockFRO24M configuration + ******************************************************************************/ +#define BOARD_BOOTCLOCKFRO24M_CORE_CLOCK 24000000U /*!< Core clock frequency: 24000000Hz */ + +/* Clock outputs (values are in Hz): */ +#define BOARD_BOOTCLOCKFRO24M_ADC0_CLOCK 0UL /* Clock consumers of ADC0_clock output : ADC0 */ +#define BOARD_BOOTCLOCKFRO24M_CLK16K_0_CLOCK 0UL /* Clock consumers of CLK16K_0_clock output : CMP0, WAKETIMER0, WUU0 */ +#define BOARD_BOOTCLOCKFRO24M_CLK16K_1_CLOCK 0UL /* Clock consumers of CLK16K_1_clock output : CMP1, LPTMR0, WAKETIMER0 */ +#define BOARD_BOOTCLOCKFRO24M_CLKOUT_CLOCK 0UL /* Clock consumers of CLKOUT_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO24M_CLK_1M_CLOCK 1000000UL /* Clock consumers of CLK_1M_clock output : CMC */ +#define BOARD_BOOTCLOCKFRO24M_CLK_48M_CLOCK 48000000UL /* Clock consumers of CLK_48M_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO24M_CLK_IN_CLOCK 0UL /* Clock consumers of CLK_IN_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO24M_CMP0FDIV_CLOCK 0UL /* Clock consumers of CMP0FDIV_clock output : CMP0 */ +#define BOARD_BOOTCLOCKFRO24M_CMP0RRDIV_CLOCK 0UL /* Clock consumers of CMP0RRDIV_clock output : CMP0 */ +#define BOARD_BOOTCLOCKFRO24M_CMP1FDIV_CLOCK 0UL /* Clock consumers of CMP1FDIV_clock output : CMP1 */ +#define BOARD_BOOTCLOCKFRO24M_CMP1RRDIV_CLOCK 0UL /* Clock consumers of CMP1RRDIV_clock output : CMP1 */ +#define BOARD_BOOTCLOCKFRO24M_CPU_CLOCK 24000000UL /* Clock consumers of CPU_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO24M_CTIMER0_CLOCK 0UL /* Clock consumers of CTIMER0_clock output : CTIMER0 */ +#define BOARD_BOOTCLOCKFRO24M_CTIMER1_CLOCK 0UL /* Clock consumers of CTIMER1_clock output : CTIMER1 */ +#define BOARD_BOOTCLOCKFRO24M_CTIMER2_CLOCK 0UL /* Clock consumers of CTIMER2_clock output : CTIMER2 */ +#define BOARD_BOOTCLOCKFRO24M_FREQME_REFERENCE_CLOCK 0UL /* Clock consumers of FREQME_reference_clock output : FREQME0 */ +#define BOARD_BOOTCLOCKFRO24M_FREQME_TARGET_CLOCK 0UL /* Clock consumers of FREQME_target_clock output : FREQME0 */ +#define BOARD_BOOTCLOCKFRO24M_FRO_12M_CLOCK 12000000UL /* Clock consumers of FRO_12M_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO24M_FRO_HF_DIV_CLOCK 48000000UL /* Clock consumers of FRO_HF_DIV_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO24M_FRO_HF_CLOCK 48000000UL /* Clock consumers of FRO_HF_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO24M_I3C_FCLK_CLOCK 0UL /* Clock consumers of I3C_FCLK_clock output : I3C0 */ +#define BOARD_BOOTCLOCKFRO24M_I3C_SLOW_TC_CLOCK 0UL /* Clock consumers of I3C_SLOW_TC_clock output : I3C0 */ +#define BOARD_BOOTCLOCKFRO24M_I3C_SLOW_CLOCK 0UL /* Clock consumers of I3C_SLOW_clock output : I3C0 */ +#define BOARD_BOOTCLOCKFRO24M_LPI2C0_CLOCK 0UL /* Clock consumers of LPI2C0_clock output : LPI2C0 */ +#define BOARD_BOOTCLOCKFRO24M_LPSPI0_CLOCK 0UL /* Clock consumers of LPSPI0_clock output : LPSPI0 */ +#define BOARD_BOOTCLOCKFRO24M_LPSPI1_CLOCK 0UL /* Clock consumers of LPSPI1_clock output : LPSPI1 */ +#define BOARD_BOOTCLOCKFRO24M_LPTMR0_CLOCK 0UL /* Clock consumers of LPTMR0_clock output : LPTMR0 */ +#define BOARD_BOOTCLOCKFRO24M_LPUART0_CLOCK 0UL /* Clock consumers of LPUART0_clock output : LPUART0 */ +#define BOARD_BOOTCLOCKFRO24M_LPUART1_CLOCK 0UL /* Clock consumers of LPUART1_clock output : LPUART1 */ +#define BOARD_BOOTCLOCKFRO24M_LPUART2_CLOCK 0UL /* Clock consumers of LPUART2_clock output : LPUART2 */ +#define BOARD_BOOTCLOCKFRO24M_MAIN_CLOCK 48000000UL /* Clock consumers of MAIN_clock output : FLEXPWM0 */ +#define BOARD_BOOTCLOCKFRO24M_OSTIMER_CLOCK 0UL /* Clock consumers of OSTIMER_clock output : OSTIMER0 */ +#define BOARD_BOOTCLOCKFRO24M_FIRC_TRIM_CLOCK 0UL /* Clock consumers of SCG.FIRC_TRIM_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO24M_SIRC_TRIM_CLOCK 0UL /* Clock consumers of SCG.SIRC_TRIM_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO24M_SLOW_CLOCK 6000000UL /* Clock consumers of Slow_clock output : AOI0, CMC, CMP0, LPTMR0, WAKETIMER0, WUU0 */ +#define BOARD_BOOTCLOCKFRO24M_SYSTEM_CLOCK 24000000UL /* Clock consumers of System_clock output : ADC0, CMP1, CTIMER0, CTIMER1, CTIMER2, DMA0, FLEXPWM0, FREQME0, GPIO0, GPIO1, GPIO2, GPIO3, I3C0, INPUTMUX0, LPI2C0, LPSPI0, LPSPI1, LPUART0, LPUART1, LPUART2, OSTIMER0, PORT0, PORT1, PORT2, PORT3, QDC0, SWD, SysTick, USB0, UTICK0, WWDT0 */ +#define BOARD_BOOTCLOCKFRO24M_TRACE_CLOCK 24000000UL /* Clock consumers of TRACE_clock output : SWD */ +#define BOARD_BOOTCLOCKFRO24M_USB0_CLOCK 0UL /* Clock consumers of USB0_clock output : USB0 */ +#define BOARD_BOOTCLOCKFRO24M_UTICK_CLOCK 1000000UL /* Clock consumers of UTICK_clock output : UTICK0 */ +#define BOARD_BOOTCLOCKFRO24M_WUU_CLOCK 0UL /* Clock consumers of WUU_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO24M_WWDT0_CLOCK 1000000UL /* Clock consumers of WWDT0_clock output : WWDT0 */ + + +/******************************************************************************* + * API for BOARD_BootClockFRO24M configuration + ******************************************************************************/ +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus*/ + +/*! + * @brief This function executes configuration of clocks. + * + */ +void BOARD_BootClockFRO24M(void); + +#if defined(__cplusplus) +} +#endif /* __cplusplus*/ + +/******************************************************************************* + ******************** Configuration BOARD_BootClockFRO48M ********************** + ******************************************************************************/ +/******************************************************************************* + * Definitions for BOARD_BootClockFRO48M configuration + ******************************************************************************/ +#define BOARD_BOOTCLOCKFRO48M_CORE_CLOCK 48000000U /*!< Core clock frequency: 48000000Hz */ + +/* Clock outputs (values are in Hz): */ +#define BOARD_BOOTCLOCKFRO48M_ADC0_CLOCK 0UL /* Clock consumers of ADC0_clock output : ADC0 */ +#define BOARD_BOOTCLOCKFRO48M_CLK16K_0_CLOCK 0UL /* Clock consumers of CLK16K_0_clock output : CMP0, WAKETIMER0, WUU0 */ +#define BOARD_BOOTCLOCKFRO48M_CLK16K_1_CLOCK 0UL /* Clock consumers of CLK16K_1_clock output : CMP1, LPTMR0, WAKETIMER0 */ +#define BOARD_BOOTCLOCKFRO48M_CLKOUT_CLOCK 0UL /* Clock consumers of CLKOUT_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO48M_CLK_1M_CLOCK 1000000UL /* Clock consumers of CLK_1M_clock output : CMC */ +#define BOARD_BOOTCLOCKFRO48M_CLK_48M_CLOCK 48000000UL /* Clock consumers of CLK_48M_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO48M_CLK_IN_CLOCK 0UL /* Clock consumers of CLK_IN_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO48M_CMP0FDIV_CLOCK 0UL /* Clock consumers of CMP0FDIV_clock output : CMP0 */ +#define BOARD_BOOTCLOCKFRO48M_CMP0RRDIV_CLOCK 0UL /* Clock consumers of CMP0RRDIV_clock output : CMP0 */ +#define BOARD_BOOTCLOCKFRO48M_CMP1FDIV_CLOCK 0UL /* Clock consumers of CMP1FDIV_clock output : CMP1 */ +#define BOARD_BOOTCLOCKFRO48M_CMP1RRDIV_CLOCK 0UL /* Clock consumers of CMP1RRDIV_clock output : CMP1 */ +#define BOARD_BOOTCLOCKFRO48M_CPU_CLOCK 48000000UL /* Clock consumers of CPU_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO48M_CTIMER0_CLOCK 0UL /* Clock consumers of CTIMER0_clock output : CTIMER0 */ +#define BOARD_BOOTCLOCKFRO48M_CTIMER1_CLOCK 0UL /* Clock consumers of CTIMER1_clock output : CTIMER1 */ +#define BOARD_BOOTCLOCKFRO48M_CTIMER2_CLOCK 0UL /* Clock consumers of CTIMER2_clock output : CTIMER2 */ +#define BOARD_BOOTCLOCKFRO48M_FREQME_REFERENCE_CLOCK 0UL /* Clock consumers of FREQME_reference_clock output : FREQME0 */ +#define BOARD_BOOTCLOCKFRO48M_FREQME_TARGET_CLOCK 0UL /* Clock consumers of FREQME_target_clock output : FREQME0 */ +#define BOARD_BOOTCLOCKFRO48M_FRO_12M_CLOCK 12000000UL /* Clock consumers of FRO_12M_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO48M_FRO_HF_DIV_CLOCK 48000000UL /* Clock consumers of FRO_HF_DIV_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO48M_FRO_HF_CLOCK 48000000UL /* Clock consumers of FRO_HF_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO48M_I3C_FCLK_CLOCK 0UL /* Clock consumers of I3C_FCLK_clock output : I3C0 */ +#define BOARD_BOOTCLOCKFRO48M_I3C_SLOW_TC_CLOCK 0UL /* Clock consumers of I3C_SLOW_TC_clock output : I3C0 */ +#define BOARD_BOOTCLOCKFRO48M_I3C_SLOW_CLOCK 0UL /* Clock consumers of I3C_SLOW_clock output : I3C0 */ +#define BOARD_BOOTCLOCKFRO48M_LPI2C0_CLOCK 0UL /* Clock consumers of LPI2C0_clock output : LPI2C0 */ +#define BOARD_BOOTCLOCKFRO48M_LPSPI0_CLOCK 0UL /* Clock consumers of LPSPI0_clock output : LPSPI0 */ +#define BOARD_BOOTCLOCKFRO48M_LPSPI1_CLOCK 0UL /* Clock consumers of LPSPI1_clock output : LPSPI1 */ +#define BOARD_BOOTCLOCKFRO48M_LPTMR0_CLOCK 0UL /* Clock consumers of LPTMR0_clock output : LPTMR0 */ +#define BOARD_BOOTCLOCKFRO48M_LPUART0_CLOCK 0UL /* Clock consumers of LPUART0_clock output : LPUART0 */ +#define BOARD_BOOTCLOCKFRO48M_LPUART1_CLOCK 0UL /* Clock consumers of LPUART1_clock output : LPUART1 */ +#define BOARD_BOOTCLOCKFRO48M_LPUART2_CLOCK 0UL /* Clock consumers of LPUART2_clock output : LPUART2 */ +#define BOARD_BOOTCLOCKFRO48M_MAIN_CLOCK 48000000UL /* Clock consumers of MAIN_clock output : FLEXPWM0 */ +#define BOARD_BOOTCLOCKFRO48M_OSTIMER_CLOCK 0UL /* Clock consumers of OSTIMER_clock output : OSTIMER0 */ +#define BOARD_BOOTCLOCKFRO48M_FIRC_TRIM_CLOCK 0UL /* Clock consumers of SCG.FIRC_TRIM_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO48M_SIRC_TRIM_CLOCK 0UL /* Clock consumers of SCG.SIRC_TRIM_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO48M_SLOW_CLOCK 12000000UL /* Clock consumers of Slow_clock output : AOI0, CMC, CMP0, LPTMR0, WAKETIMER0, WUU0 */ +#define BOARD_BOOTCLOCKFRO48M_SYSTEM_CLOCK 48000000UL /* Clock consumers of System_clock output : ADC0, CMP1, CTIMER0, CTIMER1, CTIMER2, DMA0, FLEXPWM0, FREQME0, GPIO0, GPIO1, GPIO2, GPIO3, I3C0, INPUTMUX0, LPI2C0, LPSPI0, LPSPI1, LPUART0, LPUART1, LPUART2, OSTIMER0, PORT0, PORT1, PORT2, PORT3, QDC0, SWD, SysTick, USB0, UTICK0, WWDT0 */ +#define BOARD_BOOTCLOCKFRO48M_TRACE_CLOCK 48000000UL /* Clock consumers of TRACE_clock output : SWD */ +#define BOARD_BOOTCLOCKFRO48M_USB0_CLOCK 0UL /* Clock consumers of USB0_clock output : USB0 */ +#define BOARD_BOOTCLOCKFRO48M_UTICK_CLOCK 1000000UL /* Clock consumers of UTICK_clock output : UTICK0 */ +#define BOARD_BOOTCLOCKFRO48M_WUU_CLOCK 0UL /* Clock consumers of WUU_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO48M_WWDT0_CLOCK 1000000UL /* Clock consumers of WWDT0_clock output : WWDT0 */ + + +/******************************************************************************* + * API for BOARD_BootClockFRO48M configuration + ******************************************************************************/ +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus*/ + +/*! + * @brief This function executes configuration of clocks. + * + */ +void BOARD_BootClockFRO48M(void); + +#if defined(__cplusplus) +} +#endif /* __cplusplus*/ + +/******************************************************************************* + ******************** Configuration BOARD_BootClockFRO64M ********************** + ******************************************************************************/ +/******************************************************************************* + * Definitions for BOARD_BootClockFRO64M configuration + ******************************************************************************/ +#define BOARD_BOOTCLOCKFRO64M_CORE_CLOCK 64000000U /*!< Core clock frequency: 64000000Hz */ + +/* Clock outputs (values are in Hz): */ +#define BOARD_BOOTCLOCKFRO64M_ADC0_CLOCK 0UL /* Clock consumers of ADC0_clock output : ADC0 */ +#define BOARD_BOOTCLOCKFRO64M_CLK16K_0_CLOCK 0UL /* Clock consumers of CLK16K_0_clock output : CMP0, WAKETIMER0, WUU0 */ +#define BOARD_BOOTCLOCKFRO64M_CLK16K_1_CLOCK 0UL /* Clock consumers of CLK16K_1_clock output : CMP1, LPTMR0, WAKETIMER0 */ +#define BOARD_BOOTCLOCKFRO64M_CLKOUT_CLOCK 0UL /* Clock consumers of CLKOUT_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO64M_CLK_1M_CLOCK 1000000UL /* Clock consumers of CLK_1M_clock output : CMC */ +#define BOARD_BOOTCLOCKFRO64M_CLK_48M_CLOCK 48000000UL /* Clock consumers of CLK_48M_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO64M_CLK_IN_CLOCK 0UL /* Clock consumers of CLK_IN_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO64M_CMP0FDIV_CLOCK 0UL /* Clock consumers of CMP0FDIV_clock output : CMP0 */ +#define BOARD_BOOTCLOCKFRO64M_CMP0RRDIV_CLOCK 0UL /* Clock consumers of CMP0RRDIV_clock output : CMP0 */ +#define BOARD_BOOTCLOCKFRO64M_CMP1FDIV_CLOCK 0UL /* Clock consumers of CMP1FDIV_clock output : CMP1 */ +#define BOARD_BOOTCLOCKFRO64M_CMP1RRDIV_CLOCK 0UL /* Clock consumers of CMP1RRDIV_clock output : CMP1 */ +#define BOARD_BOOTCLOCKFRO64M_CPU_CLOCK 64000000UL /* Clock consumers of CPU_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO64M_CTIMER0_CLOCK 0UL /* Clock consumers of CTIMER0_clock output : CTIMER0 */ +#define BOARD_BOOTCLOCKFRO64M_CTIMER1_CLOCK 0UL /* Clock consumers of CTIMER1_clock output : CTIMER1 */ +#define BOARD_BOOTCLOCKFRO64M_CTIMER2_CLOCK 0UL /* Clock consumers of CTIMER2_clock output : CTIMER2 */ +#define BOARD_BOOTCLOCKFRO64M_FREQME_REFERENCE_CLOCK 0UL /* Clock consumers of FREQME_reference_clock output : FREQME0 */ +#define BOARD_BOOTCLOCKFRO64M_FREQME_TARGET_CLOCK 0UL /* Clock consumers of FREQME_target_clock output : FREQME0 */ +#define BOARD_BOOTCLOCKFRO64M_FRO_12M_CLOCK 12000000UL /* Clock consumers of FRO_12M_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO64M_FRO_HF_DIV_CLOCK 64000000UL /* Clock consumers of FRO_HF_DIV_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO64M_FRO_HF_CLOCK 64000000UL /* Clock consumers of FRO_HF_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO64M_I3C_FCLK_CLOCK 0UL /* Clock consumers of I3C_FCLK_clock output : I3C0 */ +#define BOARD_BOOTCLOCKFRO64M_I3C_SLOW_TC_CLOCK 0UL /* Clock consumers of I3C_SLOW_TC_clock output : I3C0 */ +#define BOARD_BOOTCLOCKFRO64M_I3C_SLOW_CLOCK 0UL /* Clock consumers of I3C_SLOW_clock output : I3C0 */ +#define BOARD_BOOTCLOCKFRO64M_LPI2C0_CLOCK 0UL /* Clock consumers of LPI2C0_clock output : LPI2C0 */ +#define BOARD_BOOTCLOCKFRO64M_LPSPI0_CLOCK 0UL /* Clock consumers of LPSPI0_clock output : LPSPI0 */ +#define BOARD_BOOTCLOCKFRO64M_LPSPI1_CLOCK 0UL /* Clock consumers of LPSPI1_clock output : LPSPI1 */ +#define BOARD_BOOTCLOCKFRO64M_LPTMR0_CLOCK 0UL /* Clock consumers of LPTMR0_clock output : LPTMR0 */ +#define BOARD_BOOTCLOCKFRO64M_LPUART0_CLOCK 0UL /* Clock consumers of LPUART0_clock output : LPUART0 */ +#define BOARD_BOOTCLOCKFRO64M_LPUART1_CLOCK 0UL /* Clock consumers of LPUART1_clock output : LPUART1 */ +#define BOARD_BOOTCLOCKFRO64M_LPUART2_CLOCK 0UL /* Clock consumers of LPUART2_clock output : LPUART2 */ +#define BOARD_BOOTCLOCKFRO64M_MAIN_CLOCK 64000000UL /* Clock consumers of MAIN_clock output : FLEXPWM0 */ +#define BOARD_BOOTCLOCKFRO64M_OSTIMER_CLOCK 0UL /* Clock consumers of OSTIMER_clock output : OSTIMER0 */ +#define BOARD_BOOTCLOCKFRO64M_FIRC_TRIM_CLOCK 0UL /* Clock consumers of SCG.FIRC_TRIM_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO64M_SIRC_TRIM_CLOCK 0UL /* Clock consumers of SCG.SIRC_TRIM_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO64M_SLOW_CLOCK 16000000UL /* Clock consumers of Slow_clock output : AOI0, CMC, CMP0, LPTMR0, WAKETIMER0, WUU0 */ +#define BOARD_BOOTCLOCKFRO64M_SYSTEM_CLOCK 64000000UL /* Clock consumers of System_clock output : ADC0, CMP1, CTIMER0, CTIMER1, CTIMER2, DMA0, FLEXPWM0, FREQME0, GPIO0, GPIO1, GPIO2, GPIO3, I3C0, INPUTMUX0, LPI2C0, LPSPI0, LPSPI1, LPUART0, LPUART1, LPUART2, OSTIMER0, PORT0, PORT1, PORT2, PORT3, QDC0, SWD, SysTick, USB0, UTICK0, WWDT0 */ +#define BOARD_BOOTCLOCKFRO64M_TRACE_CLOCK 64000000UL /* Clock consumers of TRACE_clock output : SWD */ +#define BOARD_BOOTCLOCKFRO64M_USB0_CLOCK 0UL /* Clock consumers of USB0_clock output : USB0 */ +#define BOARD_BOOTCLOCKFRO64M_UTICK_CLOCK 1000000UL /* Clock consumers of UTICK_clock output : UTICK0 */ +#define BOARD_BOOTCLOCKFRO64M_WUU_CLOCK 0UL /* Clock consumers of WUU_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO64M_WWDT0_CLOCK 1000000UL /* Clock consumers of WWDT0_clock output : WWDT0 */ + + +/******************************************************************************* + * API for BOARD_BootClockFRO64M configuration + ******************************************************************************/ +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus*/ + +/*! + * @brief This function executes configuration of clocks. + * + */ +void BOARD_BootClockFRO64M(void); + +#if defined(__cplusplus) +} +#endif /* __cplusplus*/ + +/******************************************************************************* + ******************** Configuration BOARD_BootClockFRO96M ********************** + ******************************************************************************/ +/******************************************************************************* + * Definitions for BOARD_BootClockFRO96M configuration + ******************************************************************************/ +#define BOARD_BOOTCLOCKFRO96M_CORE_CLOCK 96000000U /*!< Core clock frequency: 96000000Hz */ + +/* Clock outputs (values are in Hz): */ +#define BOARD_BOOTCLOCKFRO96M_ADC0_CLOCK 0UL /* Clock consumers of ADC0_clock output : ADC0 */ +#define BOARD_BOOTCLOCKFRO96M_CLK16K_0_CLOCK 0UL /* Clock consumers of CLK16K_0_clock output : CMP0, WAKETIMER0, WUU0 */ +#define BOARD_BOOTCLOCKFRO96M_CLK16K_1_CLOCK 0UL /* Clock consumers of CLK16K_1_clock output : CMP1, LPTMR0, WAKETIMER0 */ +#define BOARD_BOOTCLOCKFRO96M_CLKOUT_CLOCK 0UL /* Clock consumers of CLKOUT_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO96M_CLK_1M_CLOCK 1000000UL /* Clock consumers of CLK_1M_clock output : CMC */ +#define BOARD_BOOTCLOCKFRO96M_CLK_48M_CLOCK 48000000UL /* Clock consumers of CLK_48M_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO96M_CLK_IN_CLOCK 0UL /* Clock consumers of CLK_IN_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO96M_CMP0FDIV_CLOCK 0UL /* Clock consumers of CMP0FDIV_clock output : CMP0 */ +#define BOARD_BOOTCLOCKFRO96M_CMP0RRDIV_CLOCK 0UL /* Clock consumers of CMP0RRDIV_clock output : CMP0 */ +#define BOARD_BOOTCLOCKFRO96M_CMP1FDIV_CLOCK 0UL /* Clock consumers of CMP1FDIV_clock output : CMP1 */ +#define BOARD_BOOTCLOCKFRO96M_CMP1RRDIV_CLOCK 0UL /* Clock consumers of CMP1RRDIV_clock output : CMP1 */ +#define BOARD_BOOTCLOCKFRO96M_CPU_CLOCK 96000000UL /* Clock consumers of CPU_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO96M_CTIMER0_CLOCK 0UL /* Clock consumers of CTIMER0_clock output : CTIMER0 */ +#define BOARD_BOOTCLOCKFRO96M_CTIMER1_CLOCK 0UL /* Clock consumers of CTIMER1_clock output : CTIMER1 */ +#define BOARD_BOOTCLOCKFRO96M_CTIMER2_CLOCK 0UL /* Clock consumers of CTIMER2_clock output : CTIMER2 */ +#define BOARD_BOOTCLOCKFRO96M_FREQME_REFERENCE_CLOCK 0UL /* Clock consumers of FREQME_reference_clock output : FREQME0 */ +#define BOARD_BOOTCLOCKFRO96M_FREQME_TARGET_CLOCK 0UL /* Clock consumers of FREQME_target_clock output : FREQME0 */ +#define BOARD_BOOTCLOCKFRO96M_FRO_12M_CLOCK 12000000UL /* Clock consumers of FRO_12M_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO96M_FRO_HF_DIV_CLOCK 96000000UL /* Clock consumers of FRO_HF_DIV_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO96M_FRO_HF_CLOCK 96000000UL /* Clock consumers of FRO_HF_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO96M_I3C_FCLK_CLOCK 0UL /* Clock consumers of I3C_FCLK_clock output : I3C0 */ +#define BOARD_BOOTCLOCKFRO96M_I3C_SLOW_TC_CLOCK 0UL /* Clock consumers of I3C_SLOW_TC_clock output : I3C0 */ +#define BOARD_BOOTCLOCKFRO96M_I3C_SLOW_CLOCK 0UL /* Clock consumers of I3C_SLOW_clock output : I3C0 */ +#define BOARD_BOOTCLOCKFRO96M_LPI2C0_CLOCK 0UL /* Clock consumers of LPI2C0_clock output : LPI2C0 */ +#define BOARD_BOOTCLOCKFRO96M_LPSPI0_CLOCK 0UL /* Clock consumers of LPSPI0_clock output : LPSPI0 */ +#define BOARD_BOOTCLOCKFRO96M_LPSPI1_CLOCK 0UL /* Clock consumers of LPSPI1_clock output : LPSPI1 */ +#define BOARD_BOOTCLOCKFRO96M_LPTMR0_CLOCK 0UL /* Clock consumers of LPTMR0_clock output : LPTMR0 */ +#define BOARD_BOOTCLOCKFRO96M_LPUART0_CLOCK 0UL /* Clock consumers of LPUART0_clock output : LPUART0 */ +#define BOARD_BOOTCLOCKFRO96M_LPUART1_CLOCK 0UL /* Clock consumers of LPUART1_clock output : LPUART1 */ +#define BOARD_BOOTCLOCKFRO96M_LPUART2_CLOCK 0UL /* Clock consumers of LPUART2_clock output : LPUART2 */ +#define BOARD_BOOTCLOCKFRO96M_MAIN_CLOCK 96000000UL /* Clock consumers of MAIN_clock output : FLEXPWM0 */ +#define BOARD_BOOTCLOCKFRO96M_OSTIMER_CLOCK 0UL /* Clock consumers of OSTIMER_clock output : OSTIMER0 */ +#define BOARD_BOOTCLOCKFRO96M_FIRC_TRIM_CLOCK 0UL /* Clock consumers of SCG.FIRC_TRIM_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO96M_SIRC_TRIM_CLOCK 0UL /* Clock consumers of SCG.SIRC_TRIM_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO96M_SLOW_CLOCK 24000000UL /* Clock consumers of Slow_clock output : AOI0, CMC, CMP0, LPTMR0, WAKETIMER0, WUU0 */ +#define BOARD_BOOTCLOCKFRO96M_SYSTEM_CLOCK 96000000UL /* Clock consumers of System_clock output : ADC0, CMP1, CTIMER0, CTIMER1, CTIMER2, DMA0, FLEXPWM0, FREQME0, GPIO0, GPIO1, GPIO2, GPIO3, I3C0, INPUTMUX0, LPI2C0, LPSPI0, LPSPI1, LPUART0, LPUART1, LPUART2, OSTIMER0, PORT0, PORT1, PORT2, PORT3, QDC0, SWD, SysTick, USB0, UTICK0, WWDT0 */ +#define BOARD_BOOTCLOCKFRO96M_TRACE_CLOCK 96000000UL /* Clock consumers of TRACE_clock output : SWD */ +#define BOARD_BOOTCLOCKFRO96M_USB0_CLOCK 0UL /* Clock consumers of USB0_clock output : USB0 */ +#define BOARD_BOOTCLOCKFRO96M_UTICK_CLOCK 1000000UL /* Clock consumers of UTICK_clock output : UTICK0 */ +#define BOARD_BOOTCLOCKFRO96M_WUU_CLOCK 0UL /* Clock consumers of WUU_clock output : N/A */ +#define BOARD_BOOTCLOCKFRO96M_WWDT0_CLOCK 1000000UL /* Clock consumers of WWDT0_clock output : WWDT0 */ + + +/******************************************************************************* + * API for BOARD_BootClockFRO96M configuration + ******************************************************************************/ +#if defined(__cplusplus) +extern "C" { +#endif /* __cplusplus*/ + +/*! + * @brief This function executes configuration of clocks. + * + */ +void BOARD_BootClockFRO96M(void); + +#if defined(__cplusplus) +} +#endif /* __cplusplus*/ + +#endif /* _CLOCK_CONFIG_H_ */ diff --git a/hw/bsp/mcx/boards/frdm_mcxa153/pin_mux.c b/hw/bsp/mcx/boards/frdm_mcxa153/pin_mux.c new file mode 100644 index 000000000..58b0f47e9 --- /dev/null +++ b/hw/bsp/mcx/boards/frdm_mcxa153/pin_mux.c @@ -0,0 +1,492 @@ +/* + * Copyright 2025 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +/*********************************************************************************************************************** + * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file + * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. + **********************************************************************************************************************/ + +/* clang-format off */ +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +!!GlobalInfo +product: Pins v17.0 +processor: MCXA153 +package_id: MCXA153VLH +mcu_data: ksdk2_0 +processor_version: 25.09.10 +board: FRDM-MCXA153 +external_user_signals: {} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ +/* clang-format on */ + +#include "fsl_common.h" +#include "fsl_port.h" +#include "fsl_gpio.h" +#include "pin_mux.h" + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitBootPins + * Description : Calls initialization functions. + * + * END ****************************************************************************************************************/ +void BOARD_InitBootPins(void) +{ + BOARD_InitDEBUG_UARTPins(); + BOARD_InitLEDsPins(); + BOARD_InitBUTTONsPins(); +} + +/* clang-format off */ +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitDEBUG_UARTPins: +- options: {callFromInitBoot: 'true', coreID: cm33_core0, enableClock: 'true'} +- pin_list: + - {pin_num: '51', peripheral: LPUART0, signal: RX, pin_signal: P0_2/TDO/SWO/LPUART0_RXD/LPSPI0_SCK/CT0_MAT0/UTICK_CAP0/I3C0_PUR, slew_rate: fast, open_drain: disable, + drive_strength: high, pull_select: down, pull_enable: disable, input_buffer: enable, invert_input: normal} + - {pin_num: '52', peripheral: LPUART0, signal: TX, pin_signal: P0_3/TDI/LPUART0_TXD/LPSPI0_SDO/CT0_MAT1/UTICK_CAP1/CMP0_OUT/CMP1_IN1, slew_rate: fast, open_drain: disable, + drive_strength: low, pull_select: up, pull_enable: enable, input_buffer: enable, invert_input: normal} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ +/* clang-format on */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitDEBUG_UARTPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +void BOARD_InitDEBUG_UARTPins(void) +{ + /* Write to PORT0: Peripheral clock is enabled */ + CLOCK_EnableClock(kCLOCK_GatePORT0); + /* LPUART0 peripheral is released from reset */ + RESET_ReleasePeripheralReset(kLPUART0_RST_SHIFT_RSTn); + /* PORT0 peripheral is released from reset */ + RESET_ReleasePeripheralReset(kPORT0_RST_SHIFT_RSTn); + + const port_pin_config_t DEBUG_UART_RX = {/* Internal pull-up/down resistor is disabled */ + .pullSelect = kPORT_PullDisable, + /* Low internal pull resistor value is selected. */ + .pullValueSelect = kPORT_LowPullResistor, + /* Fast slew rate is configured */ + .slewRate = kPORT_FastSlewRate, + /* Passive input filter is disabled */ + .passiveFilterEnable = kPORT_PassiveFilterDisable, + /* Open drain output is disabled */ + .openDrainEnable = kPORT_OpenDrainDisable, + /* High drive strength is configured */ + .driveStrength = kPORT_HighDriveStrength, + /* Normal drive strength is configured */ + .driveStrength1 = kPORT_NormalDriveStrength, + /* Pin is configured as LPUART0_RXD */ + .mux = kPORT_MuxAlt2, + /* Digital input enabled */ + .inputBuffer = kPORT_InputBufferEnable, + /* Digital input is not inverted */ + .invertInput = kPORT_InputNormal, + /* Pin Control Register fields [15:0] are not locked */ + .lockRegister = kPORT_UnlockRegister}; + /* PORT0_2 (pin 51) is configured as LPUART0_RXD */ + PORT_SetPinConfig(BOARD_INITDEBUG_UARTPINS_DEBUG_UART_RX_PORT, BOARD_INITDEBUG_UARTPINS_DEBUG_UART_RX_PIN, &DEBUG_UART_RX); + + const port_pin_config_t DEBUG_UART_TX = {/* Internal pull-up resistor is enabled */ + .pullSelect = kPORT_PullUp, + /* Low internal pull resistor value is selected. */ + .pullValueSelect = kPORT_LowPullResistor, + /* Fast slew rate is configured */ + .slewRate = kPORT_FastSlewRate, + /* Passive input filter is disabled */ + .passiveFilterEnable = kPORT_PassiveFilterDisable, + /* Open drain output is disabled */ + .openDrainEnable = kPORT_OpenDrainDisable, + /* Low drive strength is configured */ + .driveStrength = kPORT_LowDriveStrength, + /* Normal drive strength is configured */ + .driveStrength1 = kPORT_NormalDriveStrength, + /* Pin is configured as LPUART0_TXD */ + .mux = kPORT_MuxAlt2, + /* Digital input enabled */ + .inputBuffer = kPORT_InputBufferEnable, + /* Digital input is not inverted */ + .invertInput = kPORT_InputNormal, + /* Pin Control Register fields [15:0] are not locked */ + .lockRegister = kPORT_UnlockRegister}; + /* PORT0_3 (pin 52) is configured as LPUART0_TXD */ + PORT_SetPinConfig(BOARD_INITDEBUG_UARTPINS_DEBUG_UART_TX_PORT, BOARD_INITDEBUG_UARTPINS_DEBUG_UART_TX_PIN, &DEBUG_UART_TX); +} + +/* clang-format off */ +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitSWD_DEBUGPins: +- options: {callFromInitBoot: 'false', coreID: cm33_core0, enableClock: 'true'} +- pin_list: + - {pin_num: '50', peripheral: SWD, signal: SWCLK, pin_signal: P0_1/TCLK/SWCLK/LPUART0_CTS_B/LPSPI0_SDI/CT_INP1, slew_rate: fast, open_drain: disable, drive_strength: low, + pull_select: down, pull_enable: enable, input_buffer: enable, invert_input: normal} + - {pin_num: '49', peripheral: SWD, signal: SWDIO, pin_signal: P0_0/TMS/SWDIO/LPUART0_RTS_B/LPSPI0_PCS0/CT_INP0, slew_rate: fast, open_drain: disable, drive_strength: high, + pull_select: up, pull_enable: enable, input_buffer: enable, invert_input: normal} + - {pin_num: '51', peripheral: SWD, signal: SWO, pin_signal: P0_2/TDO/SWO/LPUART0_RXD/LPSPI0_SCK/CT0_MAT0/UTICK_CAP0/I3C0_PUR, slew_rate: fast, open_drain: disable, + drive_strength: high, pull_select: down, pull_enable: disable, input_buffer: enable, invert_input: normal} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ +/* clang-format on */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitSWD_DEBUGPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +void BOARD_InitSWD_DEBUGPins(void) +{ + /* Write to PORT0: Peripheral clock is enabled */ + CLOCK_EnableClock(kCLOCK_GatePORT0); + /* PORT0 peripheral is released from reset */ + RESET_ReleasePeripheralReset(kPORT0_RST_SHIFT_RSTn); + /* LPUART0 peripheral is released from reset */ + RESET_ReleasePeripheralReset(kLPUART0_RST_SHIFT_RSTn); + + const port_pin_config_t DEBUG_SWD_SWDIO = {/* Internal pull-up resistor is enabled */ + .pullSelect = kPORT_PullUp, + /* Low internal pull resistor value is selected. */ + .pullValueSelect = kPORT_LowPullResistor, + /* Fast slew rate is configured */ + .slewRate = kPORT_FastSlewRate, + /* Passive input filter is disabled */ + .passiveFilterEnable = kPORT_PassiveFilterDisable, + /* Open drain output is disabled */ + .openDrainEnable = kPORT_OpenDrainDisable, + /* High drive strength is configured */ + .driveStrength = kPORT_HighDriveStrength, + /* Normal drive strength is configured */ + .driveStrength1 = kPORT_NormalDriveStrength, + /* Pin is configured as SWDIO */ + .mux = kPORT_MuxAlt1, + /* Digital input enabled */ + .inputBuffer = kPORT_InputBufferEnable, + /* Digital input is not inverted */ + .invertInput = kPORT_InputNormal, + /* Pin Control Register fields [15:0] are not locked */ + .lockRegister = kPORT_UnlockRegister}; + /* PORT0_0 (pin 49) is configured as SWDIO */ + PORT_SetPinConfig(BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDIO_PORT, BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDIO_PIN, &DEBUG_SWD_SWDIO); + + const port_pin_config_t DEBUG_SWD_SWDCLK = {/* Internal pull-down resistor is enabled */ + .pullSelect = kPORT_PullDown, + /* Low internal pull resistor value is selected. */ + .pullValueSelect = kPORT_LowPullResistor, + /* Fast slew rate is configured */ + .slewRate = kPORT_FastSlewRate, + /* Passive input filter is disabled */ + .passiveFilterEnable = kPORT_PassiveFilterDisable, + /* Open drain output is disabled */ + .openDrainEnable = kPORT_OpenDrainDisable, + /* Low drive strength is configured */ + .driveStrength = kPORT_LowDriveStrength, + /* Normal drive strength is configured */ + .driveStrength1 = kPORT_NormalDriveStrength, + /* Pin is configured as SWCLK */ + .mux = kPORT_MuxAlt1, + /* Digital input enabled */ + .inputBuffer = kPORT_InputBufferEnable, + /* Digital input is not inverted */ + .invertInput = kPORT_InputNormal, + /* Pin Control Register fields [15:0] are not locked */ + .lockRegister = kPORT_UnlockRegister}; + /* PORT0_1 (pin 50) is configured as SWCLK */ + PORT_SetPinConfig(BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDCLK_PORT, BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDCLK_PIN, &DEBUG_SWD_SWDCLK); + + const port_pin_config_t DEBUG_UART_RX = {/* Internal pull-up/down resistor is disabled */ + .pullSelect = kPORT_PullDisable, + /* Low internal pull resistor value is selected. */ + .pullValueSelect = kPORT_LowPullResistor, + /* Fast slew rate is configured */ + .slewRate = kPORT_FastSlewRate, + /* Passive input filter is disabled */ + .passiveFilterEnable = kPORT_PassiveFilterDisable, + /* Open drain output is disabled */ + .openDrainEnable = kPORT_OpenDrainDisable, + /* High drive strength is configured */ + .driveStrength = kPORT_HighDriveStrength, + /* Normal drive strength is configured */ + .driveStrength1 = kPORT_NormalDriveStrength, + /* Pin is configured as SWO */ + .mux = kPORT_MuxAlt1, + /* Digital input enabled */ + .inputBuffer = kPORT_InputBufferEnable, + /* Digital input is not inverted */ + .invertInput = kPORT_InputNormal, + /* Pin Control Register fields [15:0] are not locked */ + .lockRegister = kPORT_UnlockRegister}; + /* PORT0_2 (pin 51) is configured as SWO */ + PORT_SetPinConfig(BOARD_INITSWD_DEBUGPINS_DEBUG_UART_RX_PORT, BOARD_INITSWD_DEBUGPINS_DEBUG_UART_RX_PIN, &DEBUG_UART_RX); +} + +/* clang-format off */ +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitLEDsPins: +- options: {callFromInitBoot: 'true', coreID: cm33_core0, enableClock: 'true'} +- pin_list: + - {pin_num: '37', peripheral: GPIO3, signal: 'GPIO, 13', pin_signal: P3_13/LPUART2_CTS_B/CT1_MAT3/PWM0_X1, direction: OUTPUT, gpio_init_state: 'true', slew_rate: fast, + open_drain: disable, drive_strength: low, pull_select: up, pull_enable: disable, input_buffer: enable, invert_input: normal} + - {pin_num: '38', peripheral: GPIO3, signal: 'GPIO, 12', pin_signal: P3_12/LPUART2_RTS_B/CT1_MAT2/PWM0_X0, direction: OUTPUT, gpio_init_state: 'true', slew_rate: fast, + open_drain: disable, drive_strength: low, pull_select: up, pull_enable: disable, input_buffer: enable, invert_input: normal} + - {pin_num: '46', peripheral: GPIO3, signal: 'GPIO, 0', pin_signal: P3_0/WUU0_IN22/TRIG_IN0/CT_INP16/PWM0_A0, direction: OUTPUT, gpio_init_state: 'true', slew_rate: fast, + open_drain: disable, drive_strength: low, pull_select: up, pull_enable: disable, passive_filter: disable, input_buffer: enable, invert_input: normal} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ +/* clang-format on */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitLEDsPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +void BOARD_InitLEDsPins(void) +{ + /* Write to GPIO3: Peripheral clock is enabled */ + CLOCK_EnableClock(kCLOCK_GateGPIO3); + /* Write to PORT3: Peripheral clock is enabled */ + CLOCK_EnableClock(kCLOCK_GatePORT3); + /* GPIO3 peripheral is released from reset */ + RESET_ReleasePeripheralReset(kGPIO3_RST_SHIFT_RSTn); + /* PORT3 peripheral is released from reset */ + RESET_ReleasePeripheralReset(kPORT3_RST_SHIFT_RSTn); + + gpio_pin_config_t LED_BLUE_config = { + .pinDirection = kGPIO_DigitalOutput, + .outputLogic = 1U + }; + /* Initialize GPIO functionality on pin PIO3_0 (pin 46) */ + GPIO_PinInit(BOARD_INITLEDSPINS_LED_BLUE_GPIO, BOARD_INITLEDSPINS_LED_BLUE_PIN, &LED_BLUE_config); + + gpio_pin_config_t LED_RED_config = { + .pinDirection = kGPIO_DigitalOutput, + .outputLogic = 1U + }; + /* Initialize GPIO functionality on pin PIO3_12 (pin 38) */ + GPIO_PinInit(BOARD_INITLEDSPINS_LED_RED_GPIO, BOARD_INITLEDSPINS_LED_RED_PIN, &LED_RED_config); + + gpio_pin_config_t LED_GREEN_config = { + .pinDirection = kGPIO_DigitalOutput, + .outputLogic = 1U + }; + /* Initialize GPIO functionality on pin PIO3_13 (pin 37) */ + GPIO_PinInit(BOARD_INITLEDSPINS_LED_GREEN_GPIO, BOARD_INITLEDSPINS_LED_GREEN_PIN, &LED_GREEN_config); + + /* PORT3_0 (pin 46) is configured as P3_0 */ + PORT_SetPinMux(BOARD_INITLEDSPINS_LED_BLUE_PORT, BOARD_INITLEDSPINS_LED_BLUE_PIN, kPORT_MuxAlt0); + + PORT3->PCR[0] = + ((PORT3->PCR[0] & + /* Mask bits to zero which are setting */ + (~(PORT_PCR_PS_MASK | PORT_PCR_PE_MASK | PORT_PCR_SRE_MASK | PORT_PCR_PFE_MASK | PORT_PCR_ODE_MASK | PORT_PCR_DSE_MASK | PORT_PCR_IBE_MASK | PORT_PCR_INV_MASK))) + + /* Pull Select: Enables internal pullup resistor. */ + | PORT_PCR_PS(PCR_PS_ps1) + + /* Pull Enable: Disables. */ + | PORT_PCR_PE(PCR_PE_pe0) + + /* Slew Rate Enable: Fast. */ + | PORT_PCR_SRE(PCR_SRE_sre0) + + /* Passive Filter Enable: Disables. */ + | PORT_PCR_PFE(PCR_PFE_pfe0) + + /* Open Drain Enable: Disables. */ + | PORT_PCR_ODE(PCR_ODE_ode0) + + /* Drive Strength Enable: Low. */ + | PORT_PCR_DSE(PCR_DSE_dse0) + + /* Input Buffer Enable: Enables. */ + | PORT_PCR_IBE(PCR_IBE_ibe1) + + /* Invert Input: Does not invert. */ + | PORT_PCR_INV(PCR_INV_inv0)); + + /* PORT3_12 (pin 38) is configured as P3_12 */ + PORT_SetPinMux(BOARD_INITLEDSPINS_LED_RED_PORT, BOARD_INITLEDSPINS_LED_RED_PIN, kPORT_MuxAlt0); + + PORT3->PCR[12] = + ((PORT3->PCR[12] & + /* Mask bits to zero which are setting */ + (~(PORT_PCR_PS_MASK | PORT_PCR_PE_MASK | PORT_PCR_SRE_MASK | PORT_PCR_ODE_MASK | PORT_PCR_DSE_MASK | PORT_PCR_IBE_MASK | PORT_PCR_INV_MASK))) + + /* Pull Select: Enables internal pullup resistor. */ + | PORT_PCR_PS(PCR_PS_ps1) + + /* Pull Enable: Disables. */ + | PORT_PCR_PE(PCR_PE_pe0) + + /* Slew Rate Enable: Fast. */ + | PORT_PCR_SRE(PCR_SRE_sre0) + + /* Open Drain Enable: Disables. */ + | PORT_PCR_ODE(PCR_ODE_ode0) + + /* Drive Strength Enable: Low. */ + | PORT_PCR_DSE(PCR_DSE_dse0) + + /* Input Buffer Enable: Enables. */ + | PORT_PCR_IBE(PCR_IBE_ibe1) + + /* Invert Input: Does not invert. */ + | PORT_PCR_INV(PCR_INV_inv0)); + + /* PORT3_13 (pin 37) is configured as P3_13 */ + PORT_SetPinMux(BOARD_INITLEDSPINS_LED_GREEN_PORT, BOARD_INITLEDSPINS_LED_GREEN_PIN, kPORT_MuxAlt0); + + PORT3->PCR[13] = + ((PORT3->PCR[13] & + /* Mask bits to zero which are setting */ + (~(PORT_PCR_PS_MASK | PORT_PCR_PE_MASK | PORT_PCR_SRE_MASK | PORT_PCR_ODE_MASK | PORT_PCR_DSE_MASK | PORT_PCR_IBE_MASK | PORT_PCR_INV_MASK))) + + /* Pull Select: Enables internal pullup resistor. */ + | PORT_PCR_PS(PCR_PS_ps1) + + /* Pull Enable: Disables. */ + | PORT_PCR_PE(PCR_PE_pe0) + + /* Slew Rate Enable: Fast. */ + | PORT_PCR_SRE(PCR_SRE_sre0) + + /* Open Drain Enable: Disables. */ + | PORT_PCR_ODE(PCR_ODE_ode0) + + /* Drive Strength Enable: Low. */ + | PORT_PCR_DSE(PCR_DSE_dse0) + + /* Input Buffer Enable: Enables. */ + | PORT_PCR_IBE(PCR_IBE_ibe1) + + /* Invert Input: Does not invert. */ + | PORT_PCR_INV(PCR_INV_inv0)); +} + +/* clang-format off */ +/* + * TEXT BELOW IS USED AS SETTING FOR TOOLS ************************************* +BOARD_InitBUTTONsPins: +- options: {callFromInitBoot: 'true', coreID: cm33_core0, enableClock: 'true'} +- pin_list: + - {pin_num: '1', peripheral: GPIO1, signal: 'GPIO, 7', pin_signal: P1_7/WUU0_IN9/TRIG_OUT2/LPUART2_CTS_B/CT_INP7/ADC0_A23, slew_rate: fast, open_drain: disable, + drive_strength: low, pull_select: down, pull_enable: disable, input_buffer: enable, invert_input: normal} + - {pin_num: '8', peripheral: GPIO1, signal: 'GPIO, 29', pin_signal: P1_29/RESET_B/SPC_LPREQ, slew_rate: fast, open_drain: enable, drive_strength: low, pull_select: up, + pull_enable: enable, passive_filter: enable, pull_value: low, input_buffer: enable, invert_input: normal} + - {pin_num: '32', peripheral: GPIO3, signal: 'GPIO, 29', pin_signal: P3_29/WUU0_IN27/ISPMODE_N/CT_INP3/ADC0_A14, slew_rate: fast, open_drain: disable, drive_strength: low, + pull_select: up, pull_enable: enable, input_buffer: enable, invert_input: normal} + * BE CAREFUL MODIFYING THIS COMMENT - IT IS YAML SETTINGS FOR TOOLS *********** + */ +/* clang-format on */ + +/* FUNCTION ************************************************************************************************************ + * + * Function Name : BOARD_InitBUTTONsPins + * Description : Configures pin routing and optionally pin electrical features. + * + * END ****************************************************************************************************************/ +void BOARD_InitBUTTONsPins(void) +{ + /* Write to PORT1: Peripheral clock is enabled */ + CLOCK_EnableClock(kCLOCK_GatePORT1); + /* Write to PORT3: Peripheral clock is enabled */ + CLOCK_EnableClock(kCLOCK_GatePORT3); + /* GPIO1 peripheral is released from reset */ + RESET_ReleasePeripheralReset(kGPIO1_RST_SHIFT_RSTn); + /* PORT1 peripheral is released from reset */ + RESET_ReleasePeripheralReset(kPORT1_RST_SHIFT_RSTn); + /* GPIO3 peripheral is released from reset */ + RESET_ReleasePeripheralReset(kGPIO3_RST_SHIFT_RSTn); + /* PORT3 peripheral is released from reset */ + RESET_ReleasePeripheralReset(kPORT3_RST_SHIFT_RSTn); + + const port_pin_config_t SW1 = {/* Internal pull-up resistor is enabled */ + .pullSelect = kPORT_PullUp, + /* Low internal pull resistor value is selected. */ + .pullValueSelect = kPORT_LowPullResistor, + /* Fast slew rate is configured */ + .slewRate = kPORT_FastSlewRate, + /* Passive input filter is enabled */ + .passiveFilterEnable = kPORT_PassiveFilterEnable, + /* Open drain output is enabled */ + .openDrainEnable = kPORT_OpenDrainEnable, + /* Low drive strength is configured */ + .driveStrength = kPORT_LowDriveStrength, + /* Normal drive strength is configured */ + .driveStrength1 = kPORT_NormalDriveStrength, + /* Pin is configured as P1_29 */ + .mux = kPORT_MuxAlt0, + /* Digital input enabled */ + .inputBuffer = kPORT_InputBufferEnable, + /* Digital input is not inverted */ + .invertInput = kPORT_InputNormal, + /* Pin Control Register fields [15:0] are not locked */ + .lockRegister = kPORT_UnlockRegister}; + /* PORT1_29 (pin 8) is configured as P1_29 */ + PORT_SetPinConfig(BOARD_INITBUTTONSPINS_SW1_PORT, BOARD_INITBUTTONSPINS_SW1_PIN, &SW1); + + const port_pin_config_t SW3 = {/* Internal pull-up/down resistor is disabled */ + .pullSelect = kPORT_PullDisable, + /* Low internal pull resistor value is selected. */ + .pullValueSelect = kPORT_LowPullResistor, + /* Fast slew rate is configured */ + .slewRate = kPORT_FastSlewRate, + /* Passive input filter is disabled */ + .passiveFilterEnable = kPORT_PassiveFilterDisable, + /* Open drain output is disabled */ + .openDrainEnable = kPORT_OpenDrainDisable, + /* Low drive strength is configured */ + .driveStrength = kPORT_LowDriveStrength, + /* Normal drive strength is configured */ + .driveStrength1 = kPORT_NormalDriveStrength, + /* Pin is configured as P1_7 */ + .mux = kPORT_MuxAlt0, + /* Digital input enabled */ + .inputBuffer = kPORT_InputBufferEnable, + /* Digital input is not inverted */ + .invertInput = kPORT_InputNormal, + /* Pin Control Register fields [15:0] are not locked */ + .lockRegister = kPORT_UnlockRegister}; + /* PORT1_7 (pin 1) is configured as P1_7 */ + PORT_SetPinConfig(BOARD_INITBUTTONSPINS_SW3_PORT, BOARD_INITBUTTONSPINS_SW3_PIN, &SW3); + + const port_pin_config_t ISP = {/* Internal pull-up resistor is enabled */ + .pullSelect = kPORT_PullUp, + /* Low internal pull resistor value is selected. */ + .pullValueSelect = kPORT_LowPullResistor, + /* Fast slew rate is configured */ + .slewRate = kPORT_FastSlewRate, + /* Passive input filter is disabled */ + .passiveFilterEnable = kPORT_PassiveFilterDisable, + /* Open drain output is disabled */ + .openDrainEnable = kPORT_OpenDrainDisable, + /* Low drive strength is configured */ + .driveStrength = kPORT_LowDriveStrength, + /* Normal drive strength is configured */ + .driveStrength1 = kPORT_NormalDriveStrength, + /* Pin is configured as P3_29 */ + .mux = kPORT_MuxAlt0, + /* Digital input enabled */ + .inputBuffer = kPORT_InputBufferEnable, + /* Digital input is not inverted */ + .invertInput = kPORT_InputNormal, + /* Pin Control Register fields [15:0] are not locked */ + .lockRegister = kPORT_UnlockRegister}; + /* PORT3_29 (pin 32) is configured as P3_29 */ + PORT_SetPinConfig(BOARD_INITBUTTONSPINS_ISP_PORT, BOARD_INITBUTTONSPINS_ISP_PIN, &ISP); +} +/*********************************************************************************************************************** + * EOF + **********************************************************************************************************************/ diff --git a/hw/bsp/mcx/boards/frdm_mcxa153/pin_mux.h b/hw/bsp/mcx/boards/frdm_mcxa153/pin_mux.h new file mode 100644 index 000000000..4a42f266d --- /dev/null +++ b/hw/bsp/mcx/boards/frdm_mcxa153/pin_mux.h @@ -0,0 +1,211 @@ +/* + * Copyright 2025 NXP + * All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +/*********************************************************************************************************************** + * This file was generated by the MCUXpresso Config Tools. Any manual edits made to this file + * will be overwritten if the respective MCUXpresso Config Tools is used to update this file. + **********************************************************************************************************************/ + +#ifndef _PIN_MUX_H_ +#define _PIN_MUX_H_ + +/*! + * @addtogroup pin_mux + * @{ + */ + +/*********************************************************************************************************************** + * API + **********************************************************************************************************************/ + +#if defined(__cplusplus) +extern "C" { +#endif + +/*! + * @brief Calls initialization functions. + * + */ +void BOARD_InitBootPins(void); + +/*! @name PORT0_2 (number 51), P0_2/SWO/J25[3]/J18[6] + @{ */ + +/* Symbols to be used with PORT driver */ +#define BOARD_INITDEBUG_UARTPINS_DEBUG_UART_RX_PORT PORT0 /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITDEBUG_UARTPINS_DEBUG_UART_RX_PIN 2U /*!<@brief PORT pin number */ +#define BOARD_INITDEBUG_UARTPINS_DEBUG_UART_RX_PIN_MASK (1U << 2U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! @name PORT0_3 (number 52), P0_3/J25[1]/J18[8] + @{ */ + +/* Symbols to be used with PORT driver */ +#define BOARD_INITDEBUG_UARTPINS_DEBUG_UART_TX_PORT PORT0 /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITDEBUG_UARTPINS_DEBUG_UART_TX_PIN 3U /*!<@brief PORT pin number */ +#define BOARD_INITDEBUG_UARTPINS_DEBUG_UART_TX_PIN_MASK (1U << 3U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitDEBUG_UARTPins(void); + +/*! @name PORT0_1 (number 50), P0_1/SWCLK/JP10[2]/J18[4] + @{ */ + +/* Symbols to be used with PORT driver */ +#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDCLK_PORT PORT0 /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDCLK_PIN 1U /*!<@brief PORT pin number */ +#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDCLK_PIN_MASK (1U << 1U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! @name PORT0_0 (number 49), P0_0/SWDIO/J18[2] + @{ */ + +/* Symbols to be used with PORT driver */ +#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDIO_PORT PORT0 /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDIO_PIN 0U /*!<@brief PORT pin number */ +#define BOARD_INITSWD_DEBUGPINS_DEBUG_SWD_SWDIO_PIN_MASK (1U << 0U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! @name PORT0_2 (number 51), P0_2/SWO/J25[3]/J18[6] + @{ */ + +/* Symbols to be used with PORT driver */ +#define BOARD_INITSWD_DEBUGPINS_DEBUG_UART_RX_PORT PORT0 /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITSWD_DEBUGPINS_DEBUG_UART_RX_PIN 2U /*!<@brief PORT pin number */ +#define BOARD_INITSWD_DEBUGPINS_DEBUG_UART_RX_PIN_MASK (1U << 2U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitSWD_DEBUGPins(void); + +#define PCR_DSE_dse0 0x00u /*!<@brief Drive Strength Enable: Low */ +#define PCR_IBE_ibe1 0x01u /*!<@brief Input Buffer Enable: Enables */ +#define PCR_INV_inv0 0x00u /*!<@brief Invert Input: Does not invert */ +#define PCR_ODE_ode0 0x00u /*!<@brief Open Drain Enable: Disables */ +#define PCR_PE_pe0 0x00u /*!<@brief Pull Enable: Disables */ +#define PCR_PFE_pfe0 0x00u /*!<@brief Passive Filter Enable: Disables */ +#define PCR_PS_ps1 0x01u /*!<@brief Pull Select: Enables internal pullup resistor */ +#define PCR_SRE_sre0 0x00u /*!<@brief Slew Rate Enable: Fast */ + +/*! @name PORT3_13 (number 37), P3_13/J1[14] + @{ */ + +/* Symbols to be used with GPIO driver */ +#define BOARD_INITLEDSPINS_LED_GREEN_GPIO GPIO3 /*!<@brief GPIO peripheral base pointer */ +#define BOARD_INITLEDSPINS_LED_GREEN_INIT_GPIO_VALUE 1U /*!<@brief GPIO output initial state */ +#define BOARD_INITLEDSPINS_LED_GREEN_GPIO_PIN 13U /*!<@brief GPIO pin number */ +#define BOARD_INITLEDSPINS_LED_GREEN_GPIO_PIN_MASK (1U << 13U) /*!<@brief GPIO pin mask */ + +/* Symbols to be used with PORT driver */ +#define BOARD_INITLEDSPINS_LED_GREEN_PORT PORT3 /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITLEDSPINS_LED_GREEN_PIN 13U /*!<@brief PORT pin number */ +#define BOARD_INITLEDSPINS_LED_GREEN_PIN_MASK (1U << 13U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! @name PORT3_12 (number 38), P3_12/J1[12]/J5[1] + @{ */ + +/* Symbols to be used with GPIO driver */ +#define BOARD_INITLEDSPINS_LED_RED_GPIO GPIO3 /*!<@brief GPIO peripheral base pointer */ +#define BOARD_INITLEDSPINS_LED_RED_INIT_GPIO_VALUE 1U /*!<@brief GPIO output initial state */ +#define BOARD_INITLEDSPINS_LED_RED_GPIO_PIN 12U /*!<@brief GPIO pin number */ +#define BOARD_INITLEDSPINS_LED_RED_GPIO_PIN_MASK (1U << 12U) /*!<@brief GPIO pin mask */ + +/* Symbols to be used with PORT driver */ +#define BOARD_INITLEDSPINS_LED_RED_PORT PORT3 /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITLEDSPINS_LED_RED_PIN 12U /*!<@brief PORT pin number */ +#define BOARD_INITLEDSPINS_LED_RED_PIN_MASK (1U << 12U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! @name PORT3_0 (number 46), P3_0/J1[8] + @{ */ + +/* Symbols to be used with GPIO driver */ +#define BOARD_INITLEDSPINS_LED_BLUE_GPIO GPIO3 /*!<@brief GPIO peripheral base pointer */ +#define BOARD_INITLEDSPINS_LED_BLUE_INIT_GPIO_VALUE 1U /*!<@brief GPIO output initial state */ +#define BOARD_INITLEDSPINS_LED_BLUE_GPIO_PIN 0U /*!<@brief GPIO pin number */ +#define BOARD_INITLEDSPINS_LED_BLUE_GPIO_PIN_MASK (1U << 0U) /*!<@brief GPIO pin mask */ + +/* Symbols to be used with PORT driver */ +#define BOARD_INITLEDSPINS_LED_BLUE_PORT PORT3 /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITLEDSPINS_LED_BLUE_PIN 0U /*!<@brief PORT pin number */ +#define BOARD_INITLEDSPINS_LED_BLUE_PIN_MASK (1U << 0U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitLEDsPins(void); + +/*! @name PORT1_7 (number 1), P1_7/J1[1] + @{ */ + +/* Symbols to be used with GPIO driver */ +#define BOARD_INITBUTTONSPINS_SW3_GPIO GPIO1 /*!<@brief GPIO peripheral base pointer */ +#define BOARD_INITBUTTONSPINS_SW3_GPIO_PIN 7U /*!<@brief GPIO pin number */ +#define BOARD_INITBUTTONSPINS_SW3_GPIO_PIN_MASK (1U << 7U) /*!<@brief GPIO pin mask */ + +/* Symbols to be used with PORT driver */ +#define BOARD_INITBUTTONSPINS_SW3_PORT PORT1 /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITBUTTONSPINS_SW3_PIN 7U /*!<@brief PORT pin number */ +#define BOARD_INITBUTTONSPINS_SW3_PIN_MASK (1U << 7U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! @name PORT1_29 (number 8), P1_29/J3[6]/J18[10] + @{ */ + +/* Symbols to be used with GPIO driver */ +#define BOARD_INITBUTTONSPINS_SW1_GPIO GPIO1 /*!<@brief GPIO peripheral base pointer */ +#define BOARD_INITBUTTONSPINS_SW1_GPIO_PIN 29U /*!<@brief GPIO pin number */ +#define BOARD_INITBUTTONSPINS_SW1_GPIO_PIN_MASK (1U << 29U) /*!<@brief GPIO pin mask */ + +/* Symbols to be used with PORT driver */ +#define BOARD_INITBUTTONSPINS_SW1_PORT PORT1 /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITBUTTONSPINS_SW1_PIN 29U /*!<@brief PORT pin number */ +#define BOARD_INITBUTTONSPINS_SW1_PIN_MASK (1U << 29U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! @name PORT3_29 (number 32), P3_29/J18[7]/J4[11] + @{ */ + +/* Symbols to be used with GPIO driver */ +#define BOARD_INITBUTTONSPINS_ISP_GPIO GPIO3 /*!<@brief GPIO peripheral base pointer */ +#define BOARD_INITBUTTONSPINS_ISP_GPIO_PIN 29U /*!<@brief GPIO pin number */ +#define BOARD_INITBUTTONSPINS_ISP_GPIO_PIN_MASK (1U << 29U) /*!<@brief GPIO pin mask */ + +/* Symbols to be used with PORT driver */ +#define BOARD_INITBUTTONSPINS_ISP_PORT PORT3 /*!<@brief PORT peripheral base pointer */ +#define BOARD_INITBUTTONSPINS_ISP_PIN 29U /*!<@brief PORT pin number */ +#define BOARD_INITBUTTONSPINS_ISP_PIN_MASK (1U << 29U) /*!<@brief PORT pin mask */ + /* @} */ + +/*! + * @brief Configures pin routing and optionally pin electrical features. + * + */ +void BOARD_InitBUTTONsPins(void); + +#if defined(__cplusplus) +} +#endif + +/*! + * @} + */ +#endif /* _PIN_MUX_H_ */ + +/*********************************************************************************************************************** + * EOF + **********************************************************************************************************************/ diff --git a/hw/bsp/mcx/boards/frdm_mcxa156/board.cmake b/hw/bsp/mcx/boards/frdm_mcxa156/board.cmake index a6aa6c2e4..0d8ec3229 100644 --- a/hw/bsp/mcx/boards/frdm_mcxa156/board.cmake +++ b/hw/bsp/mcx/boards/frdm_mcxa156/board.cmake @@ -1,4 +1,5 @@ set(MCU_VARIANT MCXA156) +set(MCU_FAMILY MCXA) set(MCU_CORE MCXA156) set(JLINK_DEVICE MCXA156_M33) @@ -18,4 +19,7 @@ function(update_board TARGET) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/clock_config.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/pin_mux.c ) + target_include_directories(${TARGET} PUBLIC + ${SDK_DIR}/${MCU_FAMILY}/periph1 + ) endfunction() diff --git a/hw/bsp/mcx/boards/frdm_mcxa156/board.mk b/hw/bsp/mcx/boards/frdm_mcxa156/board.mk index d4a59b32a..9d24b5fab 100644 --- a/hw/bsp/mcx/boards/frdm_mcxa156/board.mk +++ b/hw/bsp/mcx/boards/frdm_mcxa156/board.mk @@ -1,4 +1,5 @@ MCU_VARIANT = MCXA156 +MCU_FAMILY = MCXA MCU_CORE = MCXA156 PORT = 0 @@ -7,6 +8,9 @@ CFLAGS += \ -DCPU_MCXA156VLH \ -DCFG_TUSB_MCU=OPT_MCU_MCXA15 \ +INC += \ + $(TOP)/$(SDK_DIR)/$(MCU_FAMILY)/periph1 + JLINK_DEVICE = MCXA156 PYOCD_TARGET = MCXA156 diff --git a/hw/bsp/mcx/boards/frdm_mcxn947/board.cmake b/hw/bsp/mcx/boards/frdm_mcxn947/board.cmake index 8c3280743..3bf7851bd 100644 --- a/hw/bsp/mcx/boards/frdm_mcxn947/board.cmake +++ b/hw/bsp/mcx/boards/frdm_mcxn947/board.cmake @@ -1,4 +1,5 @@ set(MCU_VARIANT MCXN947) +set(MCU_FAMILY MCXN) set(MCU_CORE MCXN947_cm33_core0) set(JLINK_DEVICE MCXN947_M33_0) @@ -18,4 +19,7 @@ function(update_board TARGET) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/clock_config.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/pin_mux.c ) + target_include_directories(${TARGET} PUBLIC + ${SDK_DIR}/${MCU_FAMILY}/periph + ) endfunction() diff --git a/hw/bsp/mcx/boards/frdm_mcxn947/board.mk b/hw/bsp/mcx/boards/frdm_mcxn947/board.mk index 22fefd79b..ee1c94f94 100644 --- a/hw/bsp/mcx/boards/frdm_mcxn947/board.mk +++ b/hw/bsp/mcx/boards/frdm_mcxn947/board.mk @@ -1,4 +1,5 @@ MCU_VARIANT = MCXN947 +MCU_FAMILY = MCXN MCU_CORE = MCXN947_cm33_core0 PORT ?= 1 @@ -7,6 +8,9 @@ CFLAGS += \ -DCPU_MCXN947VDF_cm33_core0 \ -DCFG_TUSB_MCU=OPT_MCU_MCXN9 \ +INC += \ + $(TOP)/$(SDK_DIR)/$(MCU_FAMILY)/periph + JLINK_DEVICE = MCXN947_M33_0 PYOCD_TARGET = MCXN947 diff --git a/hw/bsp/mcx/boards/mcxn947brk/board.cmake b/hw/bsp/mcx/boards/mcxn947brk/board.cmake index 8c3280743..3bf7851bd 100644 --- a/hw/bsp/mcx/boards/mcxn947brk/board.cmake +++ b/hw/bsp/mcx/boards/mcxn947brk/board.cmake @@ -1,4 +1,5 @@ set(MCU_VARIANT MCXN947) +set(MCU_FAMILY MCXN) set(MCU_CORE MCXN947_cm33_core0) set(JLINK_DEVICE MCXN947_M33_0) @@ -18,4 +19,7 @@ function(update_board TARGET) ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/clock_config.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/pin_mux.c ) + target_include_directories(${TARGET} PUBLIC + ${SDK_DIR}/${MCU_FAMILY}/periph + ) endfunction() diff --git a/hw/bsp/mcx/boards/mcxn947brk/board.mk b/hw/bsp/mcx/boards/mcxn947brk/board.mk index 22fefd79b..ee1c94f94 100644 --- a/hw/bsp/mcx/boards/mcxn947brk/board.mk +++ b/hw/bsp/mcx/boards/mcxn947brk/board.mk @@ -1,4 +1,5 @@ MCU_VARIANT = MCXN947 +MCU_FAMILY = MCXN MCU_CORE = MCXN947_cm33_core0 PORT ?= 1 @@ -7,6 +8,9 @@ CFLAGS += \ -DCPU_MCXN947VDF_cm33_core0 \ -DCFG_TUSB_MCU=OPT_MCU_MCXN9 \ +INC += \ + $(TOP)/$(SDK_DIR)/$(MCU_FAMILY)/periph + JLINK_DEVICE = MCXN947_M33_0 PYOCD_TARGET = MCXN947 diff --git a/hw/bsp/mcx/family.cmake b/hw/bsp/mcx/family.cmake index d062cec16..89e2aadf2 100644 --- a/hw/bsp/mcx/family.cmake +++ b/hw/bsp/mcx/family.cmake @@ -1,7 +1,8 @@ include_guard() -set(SDK_DIR ${TOP}/hw/mcu/nxp/mcux-sdk) -set(CMSIS_DIR ${TOP}/lib/CMSIS_5) +set(MCUX_DIR ${TOP}/hw/mcu/nxp/mcuxsdk-core) +set(SDK_DIR ${TOP}/hw/mcu/nxp/mcux-devices-mcx) +set(CMSIS_DIR ${TOP}/lib/CMSIS_6) # include board specific include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) @@ -26,46 +27,55 @@ set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOL # Startup & Linker script #------------------------------------ if (NOT DEFINED LD_FILE_GNU) -set(LD_FILE_GNU ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/${MCU_CORE}_flash.ld) + set(LD_FILE_GNU ${SDK_DIR}/${MCU_FAMILY}/${MCU_VARIANT}/gcc/${MCU_CORE}_flash.ld) endif () set(LD_FILE_Clang ${LD_FILE_GNU}) + if (NOT DEFINED STARTUP_FILE_GNU) -set(STARTUP_FILE_GNU ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/startup_${MCU_CORE}.S) + set(STARTUP_FILE_GNU ${SDK_DIR}/${MCU_FAMILY}/${MCU_VARIANT}/gcc/startup_${MCU_CORE}.S) endif() set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) +if (NOT DEFINED LD_FILE_IAR) + set(LD_FILE_IAR ${SDK_DIR}/${MCU_FAMILY}/${MCU_VARIANT}/iar/${MCU_CORE}_flash.icf) +endif () + +if (NOT DEFINED STARTUP_FILE_IAR) + set(STARTUP_FILE_IAR ${SDK_DIR}/${MCU_FAMILY}/${MCU_VARIANT}/iar/startup_${MCU_CORE}.s) +endif () + #------------------------------------ # Board Target #------------------------------------ function(family_add_board BOARD_TARGET) add_library(${BOARD_TARGET} STATIC # driver - ${SDK_DIR}/drivers/gpio/fsl_gpio.c - ${SDK_DIR}/drivers/common/fsl_common_arm.c - ${SDK_DIR}/drivers/lpuart/fsl_lpuart.c + ${MCUX_DIR}/drivers/gpio/fsl_gpio.c + ${MCUX_DIR}/drivers/common/fsl_common_arm.c + ${MCUX_DIR}/drivers/lpuart/fsl_lpuart.c ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/drivers/spc/fsl_spc.c # mcu - ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_clock.c - ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_reset.c - ${SDK_DIR}/devices/${MCU_VARIANT}/system_${MCU_CORE}.c + ${SDK_DIR}/${MCU_FAMILY}/${MCU_VARIANT}/system_${MCU_CORE}.c + ${SDK_DIR}/${MCU_FAMILY}/${MCU_VARIANT}/drivers/fsl_clock.c + ${SDK_DIR}/${MCU_FAMILY}/${MCU_VARIANT}/drivers/fsl_reset.c ) target_include_directories(${BOARD_TARGET} PUBLIC ${CMSIS_DIR}/CMSIS/Core/Include - ${SDK_DIR}/drivers/gpio/ - ${SDK_DIR}/drivers/lpuart - ${SDK_DIR}/drivers/common - ${SDK_DIR}/drivers/port + ${MCUX_DIR}/drivers/gpio/ + ${MCUX_DIR}/drivers/lpuart + ${MCUX_DIR}/drivers/common + ${MCUX_DIR}/drivers/port ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/drivers/spc - ${SDK_DIR}/devices/${MCU_VARIANT} - ${SDK_DIR}/devices/${MCU_VARIANT}/drivers + ${SDK_DIR}/${MCU_FAMILY}/${MCU_VARIANT} + ${SDK_DIR}/${MCU_FAMILY}/${MCU_VARIANT}/drivers ) if (${FAMILY_MCUS} STREQUAL "MCXN9") target_sources(${BOARD_TARGET} PRIVATE - ${SDK_DIR}/drivers/lpflexcomm/fsl_lpflexcomm.c + ${MCUX_DIR}/drivers/lpflexcomm/fsl_lpflexcomm.c ) target_include_directories(${BOARD_TARGET} PUBLIC - ${SDK_DIR}/drivers/lpflexcomm + ${MCUX_DIR}/drivers/lpflexcomm ) elseif(${FAMILY_MCUS} STREQUAL "MCXA15") endif() @@ -100,7 +110,8 @@ function(family_configure_example TARGET RTOS) target_link_options(${TARGET} PUBLIC "LINKER:--script=${LD_FILE_GNU}" --specs=nosys.specs --specs=nano.specs - #-nostartfiles + "LINKER:--defsym=__stack_size__=0x1000" + "LINKER:--defsym=__heap_size__=0" ) elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") target_link_options(${TARGET} PUBLIC @@ -109,6 +120,8 @@ function(family_configure_example TARGET RTOS) elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") target_link_options(${TARGET} PUBLIC "LINKER:--config=${LD_FILE_IAR}" + "LINKER:--config_def=__stack_size__=0x1000" + "LINKER:--config_def=__heap_size__=0" ) endif () diff --git a/hw/bsp/mcx/family.mk b/hw/bsp/mcx/family.mk index 4321e654a..3d63eb238 100644 --- a/hw/bsp/mcx/family.mk +++ b/hw/bsp/mcx/family.mk @@ -1,7 +1,9 @@ UF2_FAMILY_ID = 0x2abc77ec -SDK_DIR = hw/mcu/nxp/mcux-sdk include $(TOP)/$(BOARD_PATH)/board.mk +CPU_CORE ?= cortex-m33 +MCUX_DIR = hw/mcu/nxp/mcuxsdk-core +SDK_DIR = hw/mcu/nxp/mcux-devices-mcx # Default to Highspeed PORT1 PORT ?= 1 @@ -13,10 +15,13 @@ CFLAGS += \ # mcu driver cause following warnings CFLAGS += -Wno-error=unused-parameter -Wno-error=old-style-declaration -Wno-error=redundant-decls -LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs +LDFLAGS_GCC += \ + --specs=nosys.specs --specs=nano.specs \ + -Wl,--defsym=__stack_size__=0x1000 \ + -Wl,--defsym=__heap_size__=0 \ # All source paths should be relative to the top level. -LD_FILE ?= $(SDK_DIR)/devices/$(MCU_VARIANT)/gcc/$(MCU_CORE)_flash.ld +LD_FILE ?= $(SDK_DIR)/$(MCU_FAMILY)/$(MCU_VARIANT)/gcc/$(MCU_CORE)_flash.ld # TinyUSB: Port0 is chipidea FS, Port1 is chipidea HS ifeq ($(PORT), 1) @@ -30,17 +35,17 @@ else endif SRC_C += \ - $(SDK_DIR)/devices/$(MCU_VARIANT)/system_$(MCU_CORE).c \ - $(SDK_DIR)/devices/$(MCU_VARIANT)/drivers/fsl_clock.c \ - $(SDK_DIR)/devices/$(MCU_VARIANT)/drivers/fsl_reset.c \ - ${SDK_DIR}/drivers/gpio/fsl_gpio.c \ - ${SDK_DIR}/drivers/lpuart/fsl_lpuart.c \ - ${SDK_DIR}/drivers/common/fsl_common_arm.c\ + $(TOP)/$(SDK_DIR)/$(MCU_FAMILY)/$(MCU_VARIANT)/system_$(MCU_CORE).c \ + $(TOP)/$(SDK_DIR)/$(MCU_FAMILY)/$(MCU_VARIANT)/drivers/fsl_clock.c \ + $(TOP)/$(SDK_DIR)/$(MCU_FAMILY)/$(MCU_VARIANT)/drivers/fsl_reset.c \ + $(TOP)/$(MCUX_DIR)/drivers/gpio/fsl_gpio.c \ + $(TOP)/$(MCUX_DIR)/drivers/lpuart/fsl_lpuart.c \ + $(TOP)/$(MCUX_DIR)/drivers/common/fsl_common_arm.c \ hw/bsp/mcx/drivers/spc/fsl_spc.c # fsl_lpflexcomm for MCXN9 ifeq ($(MCU_VARIANT), MCXN947) - SRC_C += ${SDK_DIR}/drivers/lpflexcomm/fsl_lpflexcomm.c + SRC_C += $(MCUX_DIR)/drivers/lpflexcomm/fsl_lpflexcomm.c endif # fsl_spc for MCXNA15 @@ -50,15 +55,15 @@ endif INC += \ $(TOP)/$(BOARD_PATH) \ - $(TOP)/lib/CMSIS_5/CMSIS/Core/Include \ - $(TOP)/$(SDK_DIR)/devices/$(MCU_VARIANT) \ - $(TOP)/$(SDK_DIR)/devices/$(MCU_VARIANT)/drivers \ - $(TOP)/$(SDK_DIR)/drivers/ \ - $(TOP)/$(SDK_DIR)/drivers/lpuart \ - $(TOP)/$(SDK_DIR)/drivers/lpflexcomm \ - $(TOP)/$(SDK_DIR)/drivers/common\ - $(TOP)/$(SDK_DIR)/drivers/gpio\ - $(TOP)/$(SDK_DIR)/drivers/port\ + $(TOP)/lib/CMSIS_6/CMSIS/Core/Include \ + $(TOP)/$(SDK_DIR)/$(MCU_FAMILY)/$(MCU_VARIANT) \ + $(TOP)/$(SDK_DIR)/$(MCU_FAMILY)/$(MCU_VARIANT)/drivers \ + $(TOP)/$(MCUX_DIR)/drivers/ \ + $(TOP)/$(MCUX_DIR)/drivers/lpuart \ + $(TOP)/$(MCUX_DIR)/drivers/lpflexcomm \ + $(TOP)/$(MCUX_DIR)/drivers/common \ + $(TOP)/$(MCUX_DIR)/drivers/gpio \ + $(TOP)/$(MCUX_DIR)/drivers/port \ $(TOP)/hw/bsp/mcx/drivers/spc -SRC_S += $(SDK_DIR)/devices/$(MCU_VARIANT)/gcc/startup_$(MCU_CORE).S +SRC_S += $(TOP)/$(SDK_DIR)/$(MCU_FAMILY)/$(MCU_VARIANT)/gcc/startup_$(MCU_CORE).S diff --git a/tools/get_deps.py b/tools/get_deps.py index 213567949..c8cb4a81b 100755 --- a/tools/get_deps.py +++ b/tools/get_deps.py @@ -60,13 +60,16 @@ deps_optional = { 'lpc11 lpc13 lpc15 lpc17 lpc18 lpc40 lpc43'], 'hw/mcu/nxp/mcuxsdk-core': ['https://github.com/nxp-mcuxpresso/mcuxsdk-core', '0c5c6b16deb211110e06bde896cdff59ab213e16', - 'lpc51 lpc55'], + 'lpc51 lpc55 mcx'], 'hw/mcu/nxp/mcux-sdk': ['https://github.com/nxp-mcuxpresso/mcux-sdk', 'a1bdae309a14ec95a4f64a96d3315a4f89c397c6', - 'kinetis_k kinetis_k32l2 kinetis_kl mcx imxrt'], + 'kinetis_k kinetis_k32l2 kinetis_kl imxrt'], 'hw/mcu/nxp/mcux-devices-lpc': ['https://github.com/nxp-mcuxpresso/mcux-devices-lpc', '8096b783ec09d0d1c8629025a5f9d8e7df26e520', 'lpc51 lpc55'], + 'hw/mcu/nxp/mcux-devices-mcx': ['https://github.com/nxp-mcuxpresso/mcux-devices-mcx', + 'ada1c97c761123ec0c179bb9bb9f744bf9a11475', + 'mcx'], 'hw/mcu/raspberry_pi/Pico-PIO-USB': ['https://github.com/sekigon-gonnoc/Pico-PIO-USB.git', '675543bcc9baa8170f868ab7ba316d418dbcf41f', 'rp2040'], @@ -252,7 +255,7 @@ deps_optional = { 'at32f413'], 'lib/CMSIS_5': ['https://github.com/ARM-software/CMSIS_5.git', '2b7495b8535bdcb306dac29b9ded4cfb679d7e5c', - 'imxrt kinetis_k32l2 kinetis_kl lpc51 lpc54 lpc55 mcx mm32 msp432e4 nrf saml2x ' + 'imxrt kinetis_k32l2 kinetis_kl lpc54 mm32 msp432e4 nrf saml2x ' 'lpc11 lpc13 lpc15 lpc17 lpc18 lpc40 lpc43 ' 'stm32c0 stm32f0 stm32f1 stm32f2 stm32f3 stm32f4 stm32f7 stm32g0 stm32g4 stm32h5 ' 'stm32h7 stm32h7rs stm32l0 stm32l1 stm32l4 stm32l5 stm32u0 stm32u5 stm32wb stm32wba ' @@ -260,7 +263,7 @@ deps_optional = { 'tm4c '], 'lib/CMSIS_6': ['https://github.com/ARM-software/CMSIS_6.git', '6f0a58d01aa9bd2feba212097f9afe7acd991d52', - 'ra stm32n6 lpc51 lpc55'], + 'ra stm32n6 lpc51 lpc55 mcx'], 'lib/sct_neopixel': ['https://github.com/gsteiert/sct_neopixel.git', 'e73e04ca63495672d955f9268e003cffe168fcd8', 'lpc55'], -- cgit v1.3.1