From 0dc1a3d3afbde34274e6883aadcac06dba4a2579 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 3 Mar 2021 16:03:21 +0700 Subject: add lpc18 family --- hw/bsp/lpc18/boards/mcb1800/board.h | 52 ++++++ hw/bsp/lpc18/boards/mcb1800/board.mk | 4 + hw/bsp/lpc18/boards/mcb1800/lpc1857.ld | 323 +++++++++++++++++++++++++++++++++ hw/bsp/lpc18/family.c | 202 +++++++++++++++++++++ hw/bsp/lpc18/family.mk | 41 +++++ hw/bsp/mcb1800/board.mk | 42 ----- hw/bsp/mcb1800/lpc1857.ld | 323 --------------------------------- hw/bsp/mcb1800/mcb1800.c | 214 ---------------------- 8 files changed, 622 insertions(+), 579 deletions(-) create mode 100644 hw/bsp/lpc18/boards/mcb1800/board.h create mode 100644 hw/bsp/lpc18/boards/mcb1800/board.mk create mode 100644 hw/bsp/lpc18/boards/mcb1800/lpc1857.ld create mode 100644 hw/bsp/lpc18/family.c create mode 100644 hw/bsp/lpc18/family.mk delete mode 100644 hw/bsp/mcb1800/board.mk delete mode 100644 hw/bsp/mcb1800/lpc1857.ld delete mode 100644 hw/bsp/mcb1800/mcb1800.c diff --git a/hw/bsp/lpc18/boards/mcb1800/board.h b/hw/bsp/lpc18/boards/mcb1800/board.h new file mode 100644 index 000000000..d690b69d9 --- /dev/null +++ b/hw/bsp/lpc18/boards/mcb1800/board.h @@ -0,0 +1,52 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2021, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +// PD_10 +#define LED_PORT 6 +#define LED_PIN 24 + +// P4_0 +#define BUTTON_PORT 2 +#define BUTTON_PIN 0 + +#define UART_DEV LPC_USART3 +#define UART_PORT 0x02 +#define UART_PIN_TX 3 +#define UART_PIN_RX 4 + + +#ifdef __cplusplus + } +#endif + +#endif diff --git a/hw/bsp/lpc18/boards/mcb1800/board.mk b/hw/bsp/lpc18/boards/mcb1800/board.mk new file mode 100644 index 000000000..d601c5773 --- /dev/null +++ b/hw/bsp/lpc18/boards/mcb1800/board.mk @@ -0,0 +1,4 @@ +LD_FILE = $(BOARD_PATH)/lpc1857.ld + +# For flash-jlink target +JLINK_DEVICE = LPC1857 diff --git a/hw/bsp/lpc18/boards/mcb1800/lpc1857.ld b/hw/bsp/lpc18/boards/mcb1800/lpc1857.ld new file mode 100644 index 000000000..983b41eb0 --- /dev/null +++ b/hw/bsp/lpc18/boards/mcb1800/lpc1857.ld @@ -0,0 +1,323 @@ +/* + * GENERATED FILE - DO NOT EDIT + * (c) Code Red Technologies Ltd, 2008-2013 + * (c) NXP Semiconductors 2013-2019 + * Generated linker script file for LPC1857 + * Created from linkscript.ldt by FMCreateLinkLibraries + * Using Freemarker v2.3.23 + * MCUXpresso IDE v10.2.1 [Build 795] [2018-07-25] on May 15, 2019 1:01:52 PM + */ + +MEMORY +{ + /* Define each memory region */ + MFlashA512 (rx) : ORIGIN = 0x1a000000, LENGTH = 0x80000 /* 512K bytes (alias Flash) */ + MFlashB512 (rx) : ORIGIN = 0x1b000000, LENGTH = 0x80000 /* 512K bytes (alias Flash2) */ + RamLoc32 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x8000 /* 32K bytes (alias RAM) */ + RamLoc40 (rwx) : ORIGIN = 0x10080000, LENGTH = 0xa000 /* 40K bytes (alias RAM2) */ + RamAHB32 (rwx) : ORIGIN = 0x20000000, LENGTH = 0x8000 /* 32K bytes (alias RAM3) */ + RamAHB16 (rwx) : ORIGIN = 0x20008000, LENGTH = 0x4000 /* 16K bytes (alias RAM4) */ + RamAHB_ETB16 (rwx) : ORIGIN = 0x2000c000, LENGTH = 0x4000 /* 16K bytes (alias RAM5) */ +} + + /* Define a symbol for the top of each memory region */ + __base_MFlashA512 = 0x1a000000 ; /* MFlashA512 */ + __base_Flash = 0x1a000000 ; /* Flash */ + __top_MFlashA512 = 0x1a000000 + 0x80000 ; /* 512K bytes */ + __top_Flash = 0x1a000000 + 0x80000 ; /* 512K bytes */ + __base_MFlashB512 = 0x1b000000 ; /* MFlashB512 */ + __base_Flash2 = 0x1b000000 ; /* Flash2 */ + __top_MFlashB512 = 0x1b000000 + 0x80000 ; /* 512K bytes */ + __top_Flash2 = 0x1b000000 + 0x80000 ; /* 512K bytes */ + __base_RamLoc32 = 0x10000000 ; /* RamLoc32 */ + __base_RAM = 0x10000000 ; /* RAM */ + __top_RamLoc32 = 0x10000000 + 0x8000 ; /* 32K bytes */ + __top_RAM = 0x10000000 + 0x8000 ; /* 32K bytes */ + __base_RamLoc40 = 0x10080000 ; /* RamLoc40 */ + __base_RAM2 = 0x10080000 ; /* RAM2 */ + __top_RamLoc40 = 0x10080000 + 0xa000 ; /* 40K bytes */ + __top_RAM2 = 0x10080000 + 0xa000 ; /* 40K bytes */ + __base_RamAHB32 = 0x20000000 ; /* RamAHB32 */ + __base_RAM3 = 0x20000000 ; /* RAM3 */ + __top_RamAHB32 = 0x20000000 + 0x8000 ; /* 32K bytes */ + __top_RAM3 = 0x20000000 + 0x8000 ; /* 32K bytes */ + __base_RamAHB16 = 0x20008000 ; /* RamAHB16 */ + __base_RAM4 = 0x20008000 ; /* RAM4 */ + __top_RamAHB16 = 0x20008000 + 0x4000 ; /* 16K bytes */ + __top_RAM4 = 0x20008000 + 0x4000 ; /* 16K bytes */ + __base_RamAHB_ETB16 = 0x2000c000 ; /* RamAHB_ETB16 */ + __base_RAM5 = 0x2000c000 ; /* RAM5 */ + __top_RamAHB_ETB16 = 0x2000c000 + 0x4000 ; /* 16K bytes */ + __top_RAM5 = 0x2000c000 + 0x4000 ; /* 16K bytes */ + +ENTRY(ResetISR) + +SECTIONS +{ + .text_Flash2 : ALIGN(4) + { + FILL(0xff) + *(.text_Flash2*) /* for compatibility with previous releases */ + *(.text_MFlashB512*) /* for compatibility with previous releases */ + *(.text.$Flash2*) + *(.text.$MFlashB512*) + *(.rodata.$Flash2*) + *(.rodata.$MFlashB512*) + } > MFlashB512 + + /* MAIN TEXT SECTION */ + .text : ALIGN(4) + { + FILL(0xff) + __vectors_start__ = ABSOLUTE(.) ; + KEEP(*(.isr_vector)) + /* Global Section Table */ + . = ALIGN(4) ; + __section_table_start = .; + __data_section_table = .; + LONG(LOADADDR(.data)); + LONG( ADDR(.data)); + LONG( SIZEOF(.data)); + LONG(LOADADDR(.data_RAM2)); + LONG( ADDR(.data_RAM2)); + LONG( SIZEOF(.data_RAM2)); + LONG(LOADADDR(.data_RAM3)); + LONG( ADDR(.data_RAM3)); + LONG( SIZEOF(.data_RAM3)); + LONG(LOADADDR(.data_RAM4)); + LONG( ADDR(.data_RAM4)); + LONG( SIZEOF(.data_RAM4)); + LONG(LOADADDR(.data_RAM5)); + LONG( ADDR(.data_RAM5)); + LONG( SIZEOF(.data_RAM5)); + __data_section_table_end = .; + __bss_section_table = .; + LONG( ADDR(.bss)); + LONG( SIZEOF(.bss)); + LONG( ADDR(.bss_RAM2)); + LONG( SIZEOF(.bss_RAM2)); + LONG( ADDR(.bss_RAM3)); + LONG( SIZEOF(.bss_RAM3)); + LONG( ADDR(.bss_RAM4)); + LONG( SIZEOF(.bss_RAM4)); + LONG( ADDR(.bss_RAM5)); + LONG( SIZEOF(.bss_RAM5)); + __bss_section_table_end = .; + __section_table_end = . ; + /* End of Global Section Table */ + + *(.after_vectors*) + + } > MFlashA512 + + .text : ALIGN(4) + { + *(.text*) + *(.rodata .rodata.* .constdata .constdata.*) + . = ALIGN(4); + } > MFlashA512 + /* + * for exception handling/unwind - some Newlib functions (in common + * with C++ and STDC++) use this. + */ + .ARM.extab : ALIGN(4) + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } > MFlashA512 + + __exidx_start = .; + + .ARM.exidx : ALIGN(4) + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > MFlashA512 + __exidx_end = .; + + _etext = .; + + /* DATA section for RamLoc40 */ + + .data_RAM2 : ALIGN(4) + { + FILL(0xff) + PROVIDE(__start_data_RAM2 = .) ; + *(.ramfunc.$RAM2) + *(.ramfunc.$RamLoc40) + *(.data.$RAM2*) + *(.data.$RamLoc40*) + . = ALIGN(4) ; + PROVIDE(__end_data_RAM2 = .) ; + } > RamLoc40 AT>MFlashA512 + /* DATA section for RamAHB32 */ + + .data_RAM3 : ALIGN(4) + { + FILL(0xff) + PROVIDE(__start_data_RAM3 = .) ; + *(.ramfunc.$RAM3) + *(.ramfunc.$RamAHB32) + *(.data.$RAM3*) + *(.data.$RamAHB32*) + . = ALIGN(4) ; + PROVIDE(__end_data_RAM3 = .) ; + } > RamAHB32 AT>MFlashA512 + /* DATA section for RamAHB16 */ + + .data_RAM4 : ALIGN(4) + { + FILL(0xff) + PROVIDE(__start_data_RAM4 = .) ; + *(.ramfunc.$RAM4) + *(.ramfunc.$RamAHB16) + *(.data.$RAM4*) + *(.data.$RamAHB16*) + . = ALIGN(4) ; + PROVIDE(__end_data_RAM4 = .) ; + } > RamAHB16 AT>MFlashA512 + /* DATA section for RamAHB_ETB16 */ + + .data_RAM5 : ALIGN(4) + { + FILL(0xff) + PROVIDE(__start_data_RAM5 = .) ; + *(.ramfunc.$RAM5) + *(.ramfunc.$RamAHB_ETB16) + *(.data.$RAM5*) + *(.data.$RamAHB_ETB16*) + . = ALIGN(4) ; + PROVIDE(__end_data_RAM5 = .) ; + } > RamAHB_ETB16 AT>MFlashA512 + /* MAIN DATA SECTION */ + .uninit_RESERVED : ALIGN(4) + { + KEEP(*(.bss.$RESERVED*)) + . = ALIGN(4) ; + _end_uninit_RESERVED = .; + } > RamLoc32 + + /* Main DATA section (RamLoc32) */ + .data : ALIGN(4) + { + FILL(0xff) + _data = . ; + *(vtable) + *(.ramfunc*) + *(.data*) + . = ALIGN(4) ; + _edata = . ; + } > RamLoc32 AT>MFlashA512 + + /* BSS section for RamLoc40 */ + .bss_RAM2 : ALIGN(4) + { + PROVIDE(__start_bss_RAM2 = .) ; + *(.bss.$RAM2*) + *(.bss.$RamLoc40*) + . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ + PROVIDE(__end_bss_RAM2 = .) ; + } > RamLoc40 + + /* BSS section for RamAHB32 */ + .bss_RAM3 : ALIGN(4) + { + PROVIDE(__start_bss_RAM3 = .) ; + *(.bss.$RAM3*) + *(.bss.$RamAHB32*) + . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ + PROVIDE(__end_bss_RAM3 = .) ; + } > RamAHB32 + + /* BSS section for RamAHB16 */ + .bss_RAM4 : ALIGN(4) + { + PROVIDE(__start_bss_RAM4 = .) ; + *(.bss.$RAM4*) + *(.bss.$RamAHB16*) + . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ + PROVIDE(__end_bss_RAM4 = .) ; + } > RamAHB16 + + /* BSS section for RamAHB_ETB16 */ + .bss_RAM5 : ALIGN(4) + { + PROVIDE(__start_bss_RAM5 = .) ; + *(.bss.$RAM5*) + *(.bss.$RamAHB_ETB16*) + . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ + PROVIDE(__end_bss_RAM5 = .) ; + } > RamAHB_ETB16 + + /* MAIN BSS SECTION */ + .bss : ALIGN(4) + { + _bss = .; + *(.bss*) + *(COMMON) + . = ALIGN(4) ; + _ebss = .; + PROVIDE(end = .); + } > RamLoc32 + + /* NOINIT section for RamLoc40 */ + .noinit_RAM2 (NOLOAD) : ALIGN(4) + { + *(.noinit.$RAM2*) + *(.noinit.$RamLoc40*) + . = ALIGN(4) ; + } > RamLoc40 + + /* NOINIT section for RamAHB32 */ + .noinit_RAM3 (NOLOAD) : ALIGN(4) + { + *(.noinit.$RAM3*) + *(.noinit.$RamAHB32*) + . = ALIGN(4) ; + } > RamAHB32 + + /* NOINIT section for RamAHB16 */ + .noinit_RAM4 (NOLOAD) : ALIGN(4) + { + *(.noinit.$RAM4*) + *(.noinit.$RamAHB16*) + . = ALIGN(4) ; + } > RamAHB16 + + /* NOINIT section for RamAHB_ETB16 */ + .noinit_RAM5 (NOLOAD) : ALIGN(4) + { + *(.noinit.$RAM5*) + *(.noinit.$RamAHB_ETB16*) + . = ALIGN(4) ; + } > RamAHB_ETB16 + + /* DEFAULT NOINIT SECTION */ + .noinit (NOLOAD): ALIGN(4) + { + _noinit = .; + *(.noinit*) + . = ALIGN(4) ; + _end_noinit = .; + } > RamLoc32 + PROVIDE(_pvHeapStart = DEFINED(__user_heap_base) ? __user_heap_base : .); + PROVIDE(_vStackTop = DEFINED(__user_stack_top) ? __user_stack_top : __top_RamLoc32 - 0); + + /* ## Create checksum value (used in startup) ## */ + PROVIDE(__valid_user_code_checksum = 0 - + (_vStackTop + + (ResetISR + 1) + + (NMI_Handler + 1) + + (HardFault_Handler + 1) + + (( DEFINED(MemManage_Handler) ? MemManage_Handler : 0 ) + 1) /* MemManage_Handler may not be defined */ + + (( DEFINED(BusFault_Handler) ? BusFault_Handler : 0 ) + 1) /* BusFault_Handler may not be defined */ + + (( DEFINED(UsageFault_Handler) ? UsageFault_Handler : 0 ) + 1) /* UsageFault_Handler may not be defined */ + ) ); + + /* Provide basic symbols giving location and size of main text + * block, including initial values of RW data sections. Note that + * these will need extending to give a complete picture with + * complex images (e.g multiple Flash banks). + */ + _image_start = LOADADDR(.text); + _image_end = LOADADDR(.data) + SIZEOF(.data); + _image_size = _image_end - _image_start; +} \ No newline at end of file diff --git a/hw/bsp/lpc18/family.c b/hw/bsp/lpc18/family.c new file mode 100644 index 000000000..441e98028 --- /dev/null +++ b/hw/bsp/lpc18/family.c @@ -0,0 +1,202 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "chip.h" +#include "bsp/board.h" +#include "board.h" + +//--------------------------------------------------------------------+ +// USB Interrupt Handler +//--------------------------------------------------------------------+ +void USB0_IRQHandler(void) +{ + #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST + tuh_int_handler(0); + #endif + + #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE + tud_int_handler(0); + #endif +} + +void USB1_IRQHandler(void) +{ + #if CFG_TUSB_RHPORT1_MODE & OPT_MODE_HOST + tuh_int_handler(1); + #endif + + #if CFG_TUSB_RHPORT1_MODE & OPT_MODE_DEVICE + tud_int_handler(1); + #endif +} + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM DECLARATION +//--------------------------------------------------------------------+ + + +/* System configuration variables used by chip driver */ +const uint32_t OscRateIn = 12000000; +const uint32_t ExtRateIn = 0; + +static const PINMUX_GRP_T pinmuxing[] = +{ + // LEDs + { 0xD, 10, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC4) }, + { 0xD, 11, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC4 | SCU_MODE_PULLDOWN) }, + { 0xD, 12, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC4 | SCU_MODE_PULLDOWN) }, + { 0xD, 13, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC4 | SCU_MODE_PULLDOWN) }, + { 0xD, 14, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC4 | SCU_MODE_PULLDOWN) }, + { 0x9, 0, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC0 | SCU_MODE_PULLDOWN) }, + { 0x9, 1, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC0 | SCU_MODE_PULLDOWN) }, + { 0x9, 2, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC0 | SCU_MODE_PULLDOWN) }, + + // Button + { 0x4, 0, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC0 | SCU_MODE_PULLUP) }, + + // UART + { UART_PORT, UART_PIN_TX, SCU_MODE_PULLDOWN | SCU_MODE_FUNC2 }, + { UART_PORT, UART_PIN_RX, SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_FUNC2 }, + + // USB0 + { 0x6, 3, SCU_MODE_PULLUP | SCU_MODE_INBUFF_EN | SCU_MODE_FUNC1 }, // P6_3 USB0_PWR_EN, USB0 VBus function + + { 0x9, 5, SCU_MODE_PULLUP | SCU_MODE_INBUFF_EN | SCU_MODE_FUNC2 }, // P9_5 USB1_VBUS_EN, USB1 VBus function + { 0x2, 5, SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_FUNC2 }, // P2_5 USB1_VBUS, MUST CONFIGURE THIS SIGNAL FOR USB1 NORMAL OPERATION +}; + +/* Pin clock mux values, re-used structure, value in first index is meaningless */ +static const PINMUX_GRP_T pinclockmuxing[] = +{ + { 0, 0, (SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_HIGHSPEEDSLEW_EN | SCU_MODE_FUNC0)}, + { 0, 1, (SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_HIGHSPEEDSLEW_EN | SCU_MODE_FUNC0)}, + { 0, 2, (SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_HIGHSPEEDSLEW_EN | SCU_MODE_FUNC0)}, + { 0, 3, (SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_HIGHSPEEDSLEW_EN | SCU_MODE_FUNC0)}, +}; + +// Invoked by startup code +void SystemInit(void) +{ +#ifdef __USE_LPCOPEN + extern void (* const g_pfnVectors[])(void); + unsigned int *pSCB_VTOR = (unsigned int *) 0xE000ED08; + *pSCB_VTOR = (unsigned int) g_pfnVectors; +#endif + + /* Setup system level pin muxing */ + Chip_SCU_SetPinMuxing(pinmuxing, sizeof(pinmuxing) / sizeof(PINMUX_GRP_T)); + + /* Clock pins only, group field not used */ + for (uint32_t i = 0; i < (sizeof(pinclockmuxing) / sizeof(pinclockmuxing[0])); i++) + { + Chip_SCU_ClockPinMuxSet(pinclockmuxing[i].pinnum, pinclockmuxing[i].modefunc); + } + + Chip_SetupXtalClocking(); +} + +void board_init(void) +{ + SystemCoreClockUpdate(); + +#if CFG_TUSB_OS == OPT_OS_NONE + // 1ms tick timer + SysTick_Config(SystemCoreClock / 1000); +#elif CFG_TUSB_OS == OPT_OS_FREERTOS + // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) + //NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); +#endif + + Chip_GPIO_Init(LPC_GPIO_PORT); + + // LED + Chip_GPIO_SetPinDIROutput(LPC_GPIO_PORT, LED_PORT, LED_PIN); + + // Button + Chip_GPIO_SetPinDIRInput(LPC_GPIO_PORT, BUTTON_PORT, BUTTON_PIN); + + //------------- UART -------------// + Chip_UART_Init(UART_DEV); + Chip_UART_SetBaud(UART_DEV, CFG_BOARD_UART_BAUDRATE); + Chip_UART_ConfigData(UART_DEV, UART_LCR_WLEN8 | UART_LCR_SBS_1BIT | UART_LCR_PARITY_DIS); + Chip_UART_TXEnable(UART_DEV); + + //------------- USB -------------// +#if CFG_TUSB_RHPORT0_MODE + Chip_USB0_Init(); +#endif + +#if CFG_TUSB_RHPORT1_MODE + Chip_USB1_Init(); +#endif +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ + Chip_GPIO_SetPinState(LPC_GPIO_PORT, LED_PORT, LED_PIN, state); +} + +uint32_t board_button_read(void) +{ + // active low + return Chip_GPIO_GetPinState(LPC_GPIO_PORT, BUTTON_PORT, BUTTON_PIN) ? 0 : 1; +} + +int board_uart_read(uint8_t* buf, int len) +{ + //return UART_ReceiveByte(BOARD_UART_PORT); + (void) buf; (void) len; + return 0; +} + +int board_uart_write(void const * buf, int len) +{ + uint8_t const* buf8 = (uint8_t const*) buf; + for(int i=0; i MFlashB512 - - /* MAIN TEXT SECTION */ - .text : ALIGN(4) - { - FILL(0xff) - __vectors_start__ = ABSOLUTE(.) ; - KEEP(*(.isr_vector)) - /* Global Section Table */ - . = ALIGN(4) ; - __section_table_start = .; - __data_section_table = .; - LONG(LOADADDR(.data)); - LONG( ADDR(.data)); - LONG( SIZEOF(.data)); - LONG(LOADADDR(.data_RAM2)); - LONG( ADDR(.data_RAM2)); - LONG( SIZEOF(.data_RAM2)); - LONG(LOADADDR(.data_RAM3)); - LONG( ADDR(.data_RAM3)); - LONG( SIZEOF(.data_RAM3)); - LONG(LOADADDR(.data_RAM4)); - LONG( ADDR(.data_RAM4)); - LONG( SIZEOF(.data_RAM4)); - LONG(LOADADDR(.data_RAM5)); - LONG( ADDR(.data_RAM5)); - LONG( SIZEOF(.data_RAM5)); - __data_section_table_end = .; - __bss_section_table = .; - LONG( ADDR(.bss)); - LONG( SIZEOF(.bss)); - LONG( ADDR(.bss_RAM2)); - LONG( SIZEOF(.bss_RAM2)); - LONG( ADDR(.bss_RAM3)); - LONG( SIZEOF(.bss_RAM3)); - LONG( ADDR(.bss_RAM4)); - LONG( SIZEOF(.bss_RAM4)); - LONG( ADDR(.bss_RAM5)); - LONG( SIZEOF(.bss_RAM5)); - __bss_section_table_end = .; - __section_table_end = . ; - /* End of Global Section Table */ - - *(.after_vectors*) - - } > MFlashA512 - - .text : ALIGN(4) - { - *(.text*) - *(.rodata .rodata.* .constdata .constdata.*) - . = ALIGN(4); - } > MFlashA512 - /* - * for exception handling/unwind - some Newlib functions (in common - * with C++ and STDC++) use this. - */ - .ARM.extab : ALIGN(4) - { - *(.ARM.extab* .gnu.linkonce.armextab.*) - } > MFlashA512 - - __exidx_start = .; - - .ARM.exidx : ALIGN(4) - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - } > MFlashA512 - __exidx_end = .; - - _etext = .; - - /* DATA section for RamLoc40 */ - - .data_RAM2 : ALIGN(4) - { - FILL(0xff) - PROVIDE(__start_data_RAM2 = .) ; - *(.ramfunc.$RAM2) - *(.ramfunc.$RamLoc40) - *(.data.$RAM2*) - *(.data.$RamLoc40*) - . = ALIGN(4) ; - PROVIDE(__end_data_RAM2 = .) ; - } > RamLoc40 AT>MFlashA512 - /* DATA section for RamAHB32 */ - - .data_RAM3 : ALIGN(4) - { - FILL(0xff) - PROVIDE(__start_data_RAM3 = .) ; - *(.ramfunc.$RAM3) - *(.ramfunc.$RamAHB32) - *(.data.$RAM3*) - *(.data.$RamAHB32*) - . = ALIGN(4) ; - PROVIDE(__end_data_RAM3 = .) ; - } > RamAHB32 AT>MFlashA512 - /* DATA section for RamAHB16 */ - - .data_RAM4 : ALIGN(4) - { - FILL(0xff) - PROVIDE(__start_data_RAM4 = .) ; - *(.ramfunc.$RAM4) - *(.ramfunc.$RamAHB16) - *(.data.$RAM4*) - *(.data.$RamAHB16*) - . = ALIGN(4) ; - PROVIDE(__end_data_RAM4 = .) ; - } > RamAHB16 AT>MFlashA512 - /* DATA section for RamAHB_ETB16 */ - - .data_RAM5 : ALIGN(4) - { - FILL(0xff) - PROVIDE(__start_data_RAM5 = .) ; - *(.ramfunc.$RAM5) - *(.ramfunc.$RamAHB_ETB16) - *(.data.$RAM5*) - *(.data.$RamAHB_ETB16*) - . = ALIGN(4) ; - PROVIDE(__end_data_RAM5 = .) ; - } > RamAHB_ETB16 AT>MFlashA512 - /* MAIN DATA SECTION */ - .uninit_RESERVED : ALIGN(4) - { - KEEP(*(.bss.$RESERVED*)) - . = ALIGN(4) ; - _end_uninit_RESERVED = .; - } > RamLoc32 - - /* Main DATA section (RamLoc32) */ - .data : ALIGN(4) - { - FILL(0xff) - _data = . ; - *(vtable) - *(.ramfunc*) - *(.data*) - . = ALIGN(4) ; - _edata = . ; - } > RamLoc32 AT>MFlashA512 - - /* BSS section for RamLoc40 */ - .bss_RAM2 : ALIGN(4) - { - PROVIDE(__start_bss_RAM2 = .) ; - *(.bss.$RAM2*) - *(.bss.$RamLoc40*) - . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ - PROVIDE(__end_bss_RAM2 = .) ; - } > RamLoc40 - - /* BSS section for RamAHB32 */ - .bss_RAM3 : ALIGN(4) - { - PROVIDE(__start_bss_RAM3 = .) ; - *(.bss.$RAM3*) - *(.bss.$RamAHB32*) - . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ - PROVIDE(__end_bss_RAM3 = .) ; - } > RamAHB32 - - /* BSS section for RamAHB16 */ - .bss_RAM4 : ALIGN(4) - { - PROVIDE(__start_bss_RAM4 = .) ; - *(.bss.$RAM4*) - *(.bss.$RamAHB16*) - . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ - PROVIDE(__end_bss_RAM4 = .) ; - } > RamAHB16 - - /* BSS section for RamAHB_ETB16 */ - .bss_RAM5 : ALIGN(4) - { - PROVIDE(__start_bss_RAM5 = .) ; - *(.bss.$RAM5*) - *(.bss.$RamAHB_ETB16*) - . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ - PROVIDE(__end_bss_RAM5 = .) ; - } > RamAHB_ETB16 - - /* MAIN BSS SECTION */ - .bss : ALIGN(4) - { - _bss = .; - *(.bss*) - *(COMMON) - . = ALIGN(4) ; - _ebss = .; - PROVIDE(end = .); - } > RamLoc32 - - /* NOINIT section for RamLoc40 */ - .noinit_RAM2 (NOLOAD) : ALIGN(4) - { - *(.noinit.$RAM2*) - *(.noinit.$RamLoc40*) - . = ALIGN(4) ; - } > RamLoc40 - - /* NOINIT section for RamAHB32 */ - .noinit_RAM3 (NOLOAD) : ALIGN(4) - { - *(.noinit.$RAM3*) - *(.noinit.$RamAHB32*) - . = ALIGN(4) ; - } > RamAHB32 - - /* NOINIT section for RamAHB16 */ - .noinit_RAM4 (NOLOAD) : ALIGN(4) - { - *(.noinit.$RAM4*) - *(.noinit.$RamAHB16*) - . = ALIGN(4) ; - } > RamAHB16 - - /* NOINIT section for RamAHB_ETB16 */ - .noinit_RAM5 (NOLOAD) : ALIGN(4) - { - *(.noinit.$RAM5*) - *(.noinit.$RamAHB_ETB16*) - . = ALIGN(4) ; - } > RamAHB_ETB16 - - /* DEFAULT NOINIT SECTION */ - .noinit (NOLOAD): ALIGN(4) - { - _noinit = .; - *(.noinit*) - . = ALIGN(4) ; - _end_noinit = .; - } > RamLoc32 - PROVIDE(_pvHeapStart = DEFINED(__user_heap_base) ? __user_heap_base : .); - PROVIDE(_vStackTop = DEFINED(__user_stack_top) ? __user_stack_top : __top_RamLoc32 - 0); - - /* ## Create checksum value (used in startup) ## */ - PROVIDE(__valid_user_code_checksum = 0 - - (_vStackTop - + (ResetISR + 1) - + (NMI_Handler + 1) - + (HardFault_Handler + 1) - + (( DEFINED(MemManage_Handler) ? MemManage_Handler : 0 ) + 1) /* MemManage_Handler may not be defined */ - + (( DEFINED(BusFault_Handler) ? BusFault_Handler : 0 ) + 1) /* BusFault_Handler may not be defined */ - + (( DEFINED(UsageFault_Handler) ? UsageFault_Handler : 0 ) + 1) /* UsageFault_Handler may not be defined */ - ) ); - - /* Provide basic symbols giving location and size of main text - * block, including initial values of RW data sections. Note that - * these will need extending to give a complete picture with - * complex images (e.g multiple Flash banks). - */ - _image_start = LOADADDR(.text); - _image_end = LOADADDR(.data) + SIZEOF(.data); - _image_size = _image_end - _image_start; -} \ No newline at end of file diff --git a/hw/bsp/mcb1800/mcb1800.c b/hw/bsp/mcb1800/mcb1800.c deleted file mode 100644 index 5256501ed..000000000 --- a/hw/bsp/mcb1800/mcb1800.c +++ /dev/null @@ -1,214 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "chip.h" -#include "../board.h" - -//--------------------------------------------------------------------+ -// USB Interrupt Handler -//--------------------------------------------------------------------+ -void USB0_IRQHandler(void) -{ - #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST - tuh_int_handler(0); - #endif - - #if CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE - tud_int_handler(0); - #endif -} - -void USB1_IRQHandler(void) -{ - #if CFG_TUSB_RHPORT1_MODE & OPT_MODE_HOST - tuh_int_handler(1); - #endif - - #if CFG_TUSB_RHPORT1_MODE & OPT_MODE_DEVICE - tud_int_handler(1); - #endif -} - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM DECLARATION -//--------------------------------------------------------------------+ - -// PD_10 -#define LED_PORT 6 -#define LED_PIN 24 - -// P4_0 -#define BUTTON_PORT 2 -#define BUTTON_PIN 0 - -#define UART_DEV LPC_USART3 -#define UART_PORT 0x02 -#define UART_PIN_TX 3 -#define UART_PIN_RX 4 - - -/* System configuration variables used by chip driver */ -const uint32_t OscRateIn = 12000000; -const uint32_t ExtRateIn = 0; - -static const PINMUX_GRP_T pinmuxing[] = -{ - // LEDs - { 0xD, 10, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC4) }, - { 0xD, 11, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC4 | SCU_MODE_PULLDOWN) }, - { 0xD, 12, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC4 | SCU_MODE_PULLDOWN) }, - { 0xD, 13, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC4 | SCU_MODE_PULLDOWN) }, - { 0xD, 14, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC4 | SCU_MODE_PULLDOWN) }, - { 0x9, 0, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC0 | SCU_MODE_PULLDOWN) }, - { 0x9, 1, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC0 | SCU_MODE_PULLDOWN) }, - { 0x9, 2, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC0 | SCU_MODE_PULLDOWN) }, - - // Button - { 0x4, 0, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC0 | SCU_MODE_PULLUP) }, - - // UART - { UART_PORT, UART_PIN_TX, SCU_MODE_PULLDOWN | SCU_MODE_FUNC2 }, - { UART_PORT, UART_PIN_RX, SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_FUNC2 }, - - // USB0 - { 0x6, 3, SCU_MODE_PULLUP | SCU_MODE_INBUFF_EN | SCU_MODE_FUNC1 }, // P6_3 USB0_PWR_EN, USB0 VBus function - - { 0x9, 5, SCU_MODE_PULLUP | SCU_MODE_INBUFF_EN | SCU_MODE_FUNC2 }, // P9_5 USB1_VBUS_EN, USB1 VBus function - { 0x2, 5, SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_FUNC2 }, // P2_5 USB1_VBUS, MUST CONFIGURE THIS SIGNAL FOR USB1 NORMAL OPERATION -}; - -/* Pin clock mux values, re-used structure, value in first index is meaningless */ -static const PINMUX_GRP_T pinclockmuxing[] = -{ - { 0, 0, (SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_HIGHSPEEDSLEW_EN | SCU_MODE_FUNC0)}, - { 0, 1, (SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_HIGHSPEEDSLEW_EN | SCU_MODE_FUNC0)}, - { 0, 2, (SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_HIGHSPEEDSLEW_EN | SCU_MODE_FUNC0)}, - { 0, 3, (SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_HIGHSPEEDSLEW_EN | SCU_MODE_FUNC0)}, -}; - -// Invoked by startup code -void SystemInit(void) -{ -#ifdef __USE_LPCOPEN - extern void (* const g_pfnVectors[])(void); - unsigned int *pSCB_VTOR = (unsigned int *) 0xE000ED08; - *pSCB_VTOR = (unsigned int) g_pfnVectors; -#endif - - /* Setup system level pin muxing */ - Chip_SCU_SetPinMuxing(pinmuxing, sizeof(pinmuxing) / sizeof(PINMUX_GRP_T)); - - /* Clock pins only, group field not used */ - for (uint32_t i = 0; i < (sizeof(pinclockmuxing) / sizeof(pinclockmuxing[0])); i++) - { - Chip_SCU_ClockPinMuxSet(pinclockmuxing[i].pinnum, pinclockmuxing[i].modefunc); - } - - Chip_SetupXtalClocking(); -} - -void board_init(void) -{ - SystemCoreClockUpdate(); - -#if CFG_TUSB_OS == OPT_OS_NONE - // 1ms tick timer - SysTick_Config(SystemCoreClock / 1000); -#elif CFG_TUSB_OS == OPT_OS_FREERTOS - // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) - //NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); -#endif - - Chip_GPIO_Init(LPC_GPIO_PORT); - - // LED - Chip_GPIO_SetPinDIROutput(LPC_GPIO_PORT, LED_PORT, LED_PIN); - - // Button - Chip_GPIO_SetPinDIRInput(LPC_GPIO_PORT, BUTTON_PORT, BUTTON_PIN); - - //------------- UART -------------// - Chip_UART_Init(UART_DEV); - Chip_UART_SetBaud(UART_DEV, CFG_BOARD_UART_BAUDRATE); - Chip_UART_ConfigData(UART_DEV, UART_LCR_WLEN8 | UART_LCR_SBS_1BIT | UART_LCR_PARITY_DIS); - Chip_UART_TXEnable(UART_DEV); - - //------------- USB -------------// -#if CFG_TUSB_RHPORT0_MODE - Chip_USB0_Init(); -#endif - -#if CFG_TUSB_RHPORT1_MODE - Chip_USB1_Init(); -#endif -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - Chip_GPIO_SetPinState(LPC_GPIO_PORT, LED_PORT, LED_PIN, state); -} - -uint32_t board_button_read(void) -{ - // active low - return Chip_GPIO_GetPinState(LPC_GPIO_PORT, BUTTON_PORT, BUTTON_PIN) ? 0 : 1; -} - -int board_uart_read(uint8_t* buf, int len) -{ - //return UART_ReceiveByte(BOARD_UART_PORT); - (void) buf; (void) len; - return 0; -} - -int board_uart_write(void const * buf, int len) -{ - uint8_t const* buf8 = (uint8_t const*) buf; - for(int i=0; i Date: Wed, 3 Mar 2021 17:29:30 +0700 Subject: mcb1800 and lpc18s37 work well with both device and host demo --- .github/workflows/build.yml | 1 + hw/bsp/lpc18/boards/lpcxpresso18s37/board.h | 77 +++++ hw/bsp/lpc18/boards/lpcxpresso18s37/board.mk | 6 + hw/bsp/lpc18/boards/lpcxpresso18s37/lpc1837.ld | 404 +++++++++++++++++++++++++ hw/bsp/lpc18/boards/mcb1800/board.h | 50 ++- hw/bsp/lpc18/boards/mcb1800/board.mk | 3 + hw/bsp/lpc18/boards/mcb1800/lpc1857.ld | 58 ++-- hw/bsp/lpc18/family.c | 45 +-- hw/bsp/lpc18/family.mk | 3 - 9 files changed, 567 insertions(+), 80 deletions(-) create mode 100644 hw/bsp/lpc18/boards/lpcxpresso18s37/board.h create mode 100644 hw/bsp/lpc18/boards/lpcxpresso18s37/board.mk create mode 100644 hw/bsp/lpc18/boards/lpcxpresso18s37/lpc1837.ld diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml index a3ea0d978..2413eaf54 100644 --- a/.github/workflows/build.yml +++ b/.github/workflows/build.yml @@ -39,6 +39,7 @@ jobs: family: # Alphabetical order - 'imxrt' + - 'lpc18' - 'lpc55' - 'nrf' - 'rp2040' diff --git a/hw/bsp/lpc18/boards/lpcxpresso18s37/board.h b/hw/bsp/lpc18/boards/lpcxpresso18s37/board.h new file mode 100644 index 000000000..b3a7bc44f --- /dev/null +++ b/hw/bsp/lpc18/boards/lpcxpresso18s37/board.h @@ -0,0 +1,77 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2021, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +// Note: For USB Host demo, install JP4 +// WARNING: don't install JP4 when running as device + +#ifdef __cplusplus + extern "C" { +#endif + +// LED Red +#define LED_PORT 3 +#define LED_PIN 7 + +// ISP Button +#define BUTTON_PORT 0 +#define BUTTON_PIN 7 + +#define UART_DEV LPC_USART0 + +static inline void board_lpc18_pinmux(void) +{ + const PINMUX_GRP_T pinmuxing[] = + { + // LEDs + { 0x6, 9 , SCU_MODE_INBUFF_EN | SCU_MODE_PULLUP | SCU_MODE_FUNC0 }, + { 0x6, 11, SCU_MODE_INBUFF_EN | SCU_MODE_PULLUP | SCU_MODE_FUNC0 }, + + // Button + { 0x2, 7, SCU_MODE_PULLUP | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_FUNC0 }, + + // UART + { 0x06, 4, SCU_MODE_PULLDOWN | SCU_MODE_FUNC2 }, + { 0x02, 1, SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_FUNC1 }, + + // USB0 + //{ 0x6, 3, SCU_MODE_PULLUP | SCU_MODE_INBUFF_EN | SCU_MODE_FUNC1 }, // P6_3 USB0_PWR_EN, USB0 VBus function + + //{ 0x9, 5, SCU_MODE_PULLUP | SCU_MODE_INBUFF_EN | SCU_MODE_FUNC2 }, // P9_5 USB1_VBUS_EN, USB1 VBus function + //{ 0x2, 5, SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_FUNC2 }, // P2_5 USB1_VBUS, MUST CONFIGURE THIS SIGNAL FOR USB1 NORMAL OPERATION + {0x2, 5, SCU_MODE_INBUFF_EN | SCU_MODE_PULLUP | SCU_MODE_FUNC4 }, + }; + + Chip_SCU_SetPinMuxing(pinmuxing, sizeof(pinmuxing) / sizeof(PINMUX_GRP_T)); +} + +#ifdef __cplusplus + } +#endif + +#endif diff --git a/hw/bsp/lpc18/boards/lpcxpresso18s37/board.mk b/hw/bsp/lpc18/boards/lpcxpresso18s37/board.mk new file mode 100644 index 000000000..29b129130 --- /dev/null +++ b/hw/bsp/lpc18/boards/lpcxpresso18s37/board.mk @@ -0,0 +1,6 @@ +LD_FILE = $(BOARD_PATH)/lpc1837.ld + +# For flash-jlink target +JLINK_DEVICE = LPC18S37 + +flash: flash-jlink diff --git a/hw/bsp/lpc18/boards/lpcxpresso18s37/lpc1837.ld b/hw/bsp/lpc18/boards/lpcxpresso18s37/lpc1837.ld new file mode 100644 index 000000000..51fd1539d --- /dev/null +++ b/hw/bsp/lpc18/boards/lpcxpresso18s37/lpc1837.ld @@ -0,0 +1,404 @@ +/* + * GENERATED FILE - DO NOT EDIT + * Copyright (c) 2008-2013 Code Red Technologies Ltd, + * Copyright 2015, 2018-2019 NXP + * (c) NXP Semiconductors 2013-2021 + * Generated linker script file for LPC1837 + * Created from linkscript.ldt by FMCreateLinkLibraries + * Using Freemarker v2.3.23 + * MCUXpresso IDE v11.2.0 [Build 4120] [2020-07-09] on Mar 3, 2021 4:22:49 PM + */ + +MEMORY +{ + /* Define each memory region */ + MFlashA512 (rx) : ORIGIN = 0x1a000000, LENGTH = 0x80000 /* 512K bytes (alias Flash) */ + MFlashB512 (rx) : ORIGIN = 0x1b000000, LENGTH = 0x80000 /* 512K bytes (alias Flash2) */ + RamLoc32 (rwx) : ORIGIN = 0x10000000, LENGTH = 0x8000 /* 32K bytes (alias RAM) */ + RamLoc40 (rwx) : ORIGIN = 0x10080000, LENGTH = 0xa000 /* 40K bytes (alias RAM2) */ + RamAHB32 (rwx) : ORIGIN = 0x20000000, LENGTH = 0x8000 /* 32K bytes (alias RAM3) */ + RamAHB16 (rwx) : ORIGIN = 0x20008000, LENGTH = 0x4000 /* 16K bytes (alias RAM4) */ + RamAHB_ETB16 (rwx) : ORIGIN = 0x2000c000, LENGTH = 0x4000 /* 16K bytes (alias RAM5) */ +} + +/* Define a symbol for the top of each memory region */ +__base_MFlashA512 = 0x1a000000 ; /* MFlashA512 */ +__base_Flash = 0x1a000000 ; /* Flash */ +__top_MFlashA512 = 0x1a000000 + 0x80000 ; /* 512K bytes */ +__top_Flash = 0x1a000000 + 0x80000 ; /* 512K bytes */ +__base_MFlashB512 = 0x1b000000 ; /* MFlashB512 */ +__base_Flash2 = 0x1b000000 ; /* Flash2 */ +__top_MFlashB512 = 0x1b000000 + 0x80000 ; /* 512K bytes */ +__top_Flash2 = 0x1b000000 + 0x80000 ; /* 512K bytes */ +__base_RamLoc32 = 0x10000000 ; /* RamLoc32 */ +__base_RAM = 0x10000000 ; /* RAM */ +__top_RamLoc32 = 0x10000000 + 0x8000 ; /* 32K bytes */ +__top_RAM = 0x10000000 + 0x8000 ; /* 32K bytes */ +__base_RamLoc40 = 0x10080000 ; /* RamLoc40 */ +__base_RAM2 = 0x10080000 ; /* RAM2 */ +__top_RamLoc40 = 0x10080000 + 0xa000 ; /* 40K bytes */ +__top_RAM2 = 0x10080000 + 0xa000 ; /* 40K bytes */ +__base_RamAHB32 = 0x20000000 ; /* RamAHB32 */ +__base_RAM3 = 0x20000000 ; /* RAM3 */ +__top_RamAHB32 = 0x20000000 + 0x8000 ; /* 32K bytes */ +__top_RAM3 = 0x20000000 + 0x8000 ; /* 32K bytes */ +__base_RamAHB16 = 0x20008000 ; /* RamAHB16 */ +__base_RAM4 = 0x20008000 ; /* RAM4 */ +__top_RamAHB16 = 0x20008000 + 0x4000 ; /* 16K bytes */ +__top_RAM4 = 0x20008000 + 0x4000 ; /* 16K bytes */ +__base_RamAHB_ETB16 = 0x2000c000 ; /* RamAHB_ETB16 */ +__base_RAM5 = 0x2000c000 ; /* RAM5 */ +__top_RamAHB_ETB16 = 0x2000c000 + 0x4000 ; /* 16K bytes */ +__top_RAM5 = 0x2000c000 + 0x4000 ; /* 16K bytes */ + +ENTRY(ResetISR) + +SECTIONS +{ + .text_Flash2 : ALIGN(4) + { + FILL(0xff) + *(.text_Flash2) /* for compatibility with previous releases */ + *(.text_MFlashB512) /* for compatibility with previous releases */ + *(.text.$Flash2) + *(.text.$MFlashB512) + *(.text_Flash2.*) /* for compatibility with previous releases */ + *(.text_MFlashB512.*) /* for compatibility with previous releases */ + *(.text.$Flash2.*) + *(.text.$MFlashB512.*) + *(.rodata.$Flash2) + *(.rodata.$MFlashB512) + *(.rodata.$Flash2.*) + *(.rodata.$MFlashB512.*) } > MFlashB512 + + /* MAIN TEXT SECTION */ + .text : ALIGN(4) + { + FILL(0xff) + __vectors_start__ = ABSOLUTE(.) ; + KEEP(*(.isr_vector)) + /* Global Section Table */ + . = ALIGN(4) ; + __section_table_start = .; + __data_section_table = .; + LONG(LOADADDR(.data)); + LONG( ADDR(.data)); + LONG( SIZEOF(.data)); + LONG(LOADADDR(.data_RAM2)); + LONG( ADDR(.data_RAM2)); + LONG( SIZEOF(.data_RAM2)); + LONG(LOADADDR(.data_RAM3)); + LONG( ADDR(.data_RAM3)); + LONG( SIZEOF(.data_RAM3)); + LONG(LOADADDR(.data_RAM4)); + LONG( ADDR(.data_RAM4)); + LONG( SIZEOF(.data_RAM4)); + LONG(LOADADDR(.data_RAM5)); + LONG( ADDR(.data_RAM5)); + LONG( SIZEOF(.data_RAM5)); + __data_section_table_end = .; + __bss_section_table = .; + LONG( ADDR(.bss)); + LONG( SIZEOF(.bss)); + LONG( ADDR(.bss_RAM2)); + LONG( SIZEOF(.bss_RAM2)); + LONG( ADDR(.bss_RAM3)); + LONG( SIZEOF(.bss_RAM3)); + LONG( ADDR(.bss_RAM4)); + LONG( SIZEOF(.bss_RAM4)); + LONG( ADDR(.bss_RAM5)); + LONG( SIZEOF(.bss_RAM5)); + __bss_section_table_end = .; + __section_table_end = . ; + /* End of Global Section Table */ + + *(.after_vectors*) + + } > MFlashA512 + + .text : ALIGN(4) + { + *(.text*) + *(.rodata .rodata.* .constdata .constdata.*) + . = ALIGN(4); + } > MFlashA512 + /* + * for exception handling/unwind - some Newlib functions (in common + * with C++ and STDC++) use this. + */ + .ARM.extab : ALIGN(4) + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } > MFlashA512 + + .ARM.exidx : ALIGN(4) + { + __exidx_start = .; + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + __exidx_end = .; + } > MFlashA512 + + _etext = .; + + /* DATA section for RamLoc40 */ + + .data_RAM2 : ALIGN(4) + { + FILL(0xff) + PROVIDE(__start_data_RAM2 = .) ; + PROVIDE(__start_data_RamLoc40 = .) ; + *(.ramfunc.$RAM2) + *(.ramfunc.$RamLoc40) + *(.data.$RAM2) + *(.data.$RamLoc40) + *(.data.$RAM2.*) + *(.data.$RamLoc40.*) + . = ALIGN(4) ; + PROVIDE(__end_data_RAM2 = .) ; + PROVIDE(__end_data_RamLoc40 = .) ; + } > RamLoc40 AT>MFlashA512 + + /* DATA section for RamAHB32 */ + + .data_RAM3 : ALIGN(4) + { + FILL(0xff) + PROVIDE(__start_data_RAM3 = .) ; + PROVIDE(__start_data_RamAHB32 = .) ; + *(.ramfunc.$RAM3) + *(.ramfunc.$RamAHB32) + *(.data.$RAM3) + *(.data.$RamAHB32) + *(.data.$RAM3.*) + *(.data.$RamAHB32.*) + . = ALIGN(4) ; + PROVIDE(__end_data_RAM3 = .) ; + PROVIDE(__end_data_RamAHB32 = .) ; + } > RamAHB32 AT>MFlashA512 + + /* DATA section for RamAHB16 */ + + .data_RAM4 : ALIGN(4) + { + FILL(0xff) + PROVIDE(__start_data_RAM4 = .) ; + PROVIDE(__start_data_RamAHB16 = .) ; + *(.ramfunc.$RAM4) + *(.ramfunc.$RamAHB16) + *(.data.$RAM4) + *(.data.$RamAHB16) + *(.data.$RAM4.*) + *(.data.$RamAHB16.*) + . = ALIGN(4) ; + PROVIDE(__end_data_RAM4 = .) ; + PROVIDE(__end_data_RamAHB16 = .) ; + } > RamAHB16 AT>MFlashA512 + + /* DATA section for RamAHB_ETB16 */ + + .data_RAM5 : ALIGN(4) + { + FILL(0xff) + PROVIDE(__start_data_RAM5 = .) ; + PROVIDE(__start_data_RamAHB_ETB16 = .) ; + *(.ramfunc.$RAM5) + *(.ramfunc.$RamAHB_ETB16) + *(.data.$RAM5) + *(.data.$RamAHB_ETB16) + *(.data.$RAM5.*) + *(.data.$RamAHB_ETB16.*) + . = ALIGN(4) ; + PROVIDE(__end_data_RAM5 = .) ; + PROVIDE(__end_data_RamAHB_ETB16 = .) ; + } > RamAHB_ETB16 AT>MFlashA512 + + /* MAIN DATA SECTION */ + .uninit_RESERVED (NOLOAD) : ALIGN(4) + { + _start_uninit_RESERVED = .; + KEEP(*(.bss.$RESERVED*)) + . = ALIGN(4) ; + _end_uninit_RESERVED = .; + } > RamLoc32 AT> RamLoc32 + + /* Main DATA section (RamLoc32) */ + .data : ALIGN(4) + { + FILL(0xff) + _data = . ; + PROVIDE(__start_data_RAM = .) ; + PROVIDE(__start_data_RamLoc32 = .) ; + *(vtable) + *(.ramfunc*) + KEEP(*(CodeQuickAccess)) + KEEP(*(DataQuickAccess)) + *(RamFunction) + *(.data*) + . = ALIGN(4) ; + _edata = . ; + PROVIDE(__end_data_RAM = .) ; + PROVIDE(__end_data_RamLoc32 = .) ; + } > RamLoc32 AT>MFlashA512 + + /* BSS section for RamLoc40 */ + .bss_RAM2 : ALIGN(4) + { + PROVIDE(__start_bss_RAM2 = .) ; + PROVIDE(__start_bss_RamLoc40 = .) ; + *(.bss.$RAM2) + *(.bss.$RamLoc40) + *(.bss.$RAM2.*) + *(.bss.$RamLoc40.*) + . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ + PROVIDE(__end_bss_RAM2 = .) ; + PROVIDE(__end_bss_RamLoc40 = .) ; + } > RamLoc40 AT> RamLoc40 + + /* BSS section for RamAHB32 */ + .bss_RAM3 : ALIGN(4) + { + PROVIDE(__start_bss_RAM3 = .) ; + PROVIDE(__start_bss_RamAHB32 = .) ; + *(.bss.$RAM3) + *(.bss.$RamAHB32) + *(.bss.$RAM3.*) + *(.bss.$RamAHB32.*) + . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ + PROVIDE(__end_bss_RAM3 = .) ; + PROVIDE(__end_bss_RamAHB32 = .) ; + } > RamAHB32 AT> RamAHB32 + + /* BSS section for RamAHB16 */ + .bss_RAM4 : ALIGN(4) + { + PROVIDE(__start_bss_RAM4 = .) ; + PROVIDE(__start_bss_RamAHB16 = .) ; + *(.bss.$RAM4) + *(.bss.$RamAHB16) + *(.bss.$RAM4.*) + *(.bss.$RamAHB16.*) + . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ + PROVIDE(__end_bss_RAM4 = .) ; + PROVIDE(__end_bss_RamAHB16 = .) ; + } > RamAHB16 AT> RamAHB16 + + /* BSS section for RamAHB_ETB16 */ + .bss_RAM5 : ALIGN(4) + { + PROVIDE(__start_bss_RAM5 = .) ; + PROVIDE(__start_bss_RamAHB_ETB16 = .) ; + *(.bss.$RAM5) + *(.bss.$RamAHB_ETB16) + *(.bss.$RAM5.*) + *(.bss.$RamAHB_ETB16.*) + . = ALIGN (. != 0 ? 4 : 1) ; /* avoid empty segment */ + PROVIDE(__end_bss_RAM5 = .) ; + PROVIDE(__end_bss_RamAHB_ETB16 = .) ; + } > RamAHB_ETB16 AT> RamAHB_ETB16 + + /* MAIN BSS SECTION */ + .bss : ALIGN(4) + { + _bss = .; + PROVIDE(__start_bss_RAM = .) ; + PROVIDE(__start_bss_RamLoc32 = .) ; + *(.bss*) + *(COMMON) + . = ALIGN(4) ; + _ebss = .; + PROVIDE(__end_bss_RAM = .) ; + PROVIDE(__end_bss_RamLoc32 = .) ; + PROVIDE(end = .); + } > RamLoc32 AT> RamLoc32 + + /* NOINIT section for RamLoc40 */ + .noinit_RAM2 (NOLOAD) : ALIGN(4) + { + PROVIDE(__start_noinit_RAM2 = .) ; + PROVIDE(__start_noinit_RamLoc40 = .) ; + *(.noinit.$RAM2) + *(.noinit.$RamLoc40) + *(.noinit.$RAM2.*) + *(.noinit.$RamLoc40.*) + . = ALIGN(4) ; + PROVIDE(__end_noinit_RAM2 = .) ; + PROVIDE(__end_noinit_RamLoc40 = .) ; + } > RamLoc40 AT> RamLoc40 + + /* NOINIT section for RamAHB32 */ + .noinit_RAM3 (NOLOAD) : ALIGN(4) + { + PROVIDE(__start_noinit_RAM3 = .) ; + PROVIDE(__start_noinit_RamAHB32 = .) ; + *(.noinit.$RAM3) + *(.noinit.$RamAHB32) + *(.noinit.$RAM3.*) + *(.noinit.$RamAHB32.*) + . = ALIGN(4) ; + PROVIDE(__end_noinit_RAM3 = .) ; + PROVIDE(__end_noinit_RamAHB32 = .) ; + } > RamAHB32 AT> RamAHB32 + + /* NOINIT section for RamAHB16 */ + .noinit_RAM4 (NOLOAD) : ALIGN(4) + { + PROVIDE(__start_noinit_RAM4 = .) ; + PROVIDE(__start_noinit_RamAHB16 = .) ; + *(.noinit.$RAM4) + *(.noinit.$RamAHB16) + *(.noinit.$RAM4.*) + *(.noinit.$RamAHB16.*) + . = ALIGN(4) ; + PROVIDE(__end_noinit_RAM4 = .) ; + PROVIDE(__end_noinit_RamAHB16 = .) ; + } > RamAHB16 AT> RamAHB16 + + /* NOINIT section for RamAHB_ETB16 */ + .noinit_RAM5 (NOLOAD) : ALIGN(4) + { + PROVIDE(__start_noinit_RAM5 = .) ; + PROVIDE(__start_noinit_RamAHB_ETB16 = .) ; + *(.noinit.$RAM5) + *(.noinit.$RamAHB_ETB16) + *(.noinit.$RAM5.*) + *(.noinit.$RamAHB_ETB16.*) + . = ALIGN(4) ; + PROVIDE(__end_noinit_RAM5 = .) ; + PROVIDE(__end_noinit_RamAHB_ETB16 = .) ; + } > RamAHB_ETB16 AT> RamAHB_ETB16 + + /* DEFAULT NOINIT SECTION */ + .noinit (NOLOAD): ALIGN(4) + { + _noinit = .; + PROVIDE(__start_noinit_RAM = .) ; + PROVIDE(__start_noinit_RamLoc32 = .) ; + *(.noinit*) + . = ALIGN(4) ; + _end_noinit = .; + PROVIDE(__end_noinit_RAM = .) ; + PROVIDE(__end_noinit_RamLoc32 = .) ; + } > RamLoc32 AT> RamLoc32 + PROVIDE(_pvHeapStart = DEFINED(__user_heap_base) ? __user_heap_base : .); + PROVIDE(_vStackTop = DEFINED(__user_stack_top) ? __user_stack_top : __top_RamLoc32 - 0); + + /* ## Create checksum value (used in startup) ## */ + PROVIDE(__valid_user_code_checksum = 0 - + (_vStackTop + + (ResetISR + 1) + + (NMI_Handler + 1) + + (HardFault_Handler + 1) + + (( DEFINED(MemManage_Handler) ? MemManage_Handler : 0 ) + 1) /* MemManage_Handler may not be defined */ + + (( DEFINED(BusFault_Handler) ? BusFault_Handler : 0 ) + 1) /* BusFault_Handler may not be defined */ + + (( DEFINED(UsageFault_Handler) ? UsageFault_Handler : 0 ) + 1) /* UsageFault_Handler may not be defined */ + ) ); + + /* Provide basic symbols giving location and size of main text + * block, including initial values of RW data sections. Note that + * these will need extending to give a complete picture with + * complex images (e.g multiple Flash banks). + */ + _image_start = LOADADDR(.text); + _image_end = LOADADDR(.data) + SIZEOF(.data); + _image_size = _image_end - _image_start; +} \ No newline at end of file diff --git a/hw/bsp/lpc18/boards/mcb1800/board.h b/hw/bsp/lpc18/boards/mcb1800/board.h index d690b69d9..6111da975 100644 --- a/hw/bsp/lpc18/boards/mcb1800/board.h +++ b/hw/bsp/lpc18/boards/mcb1800/board.h @@ -39,11 +39,53 @@ #define BUTTON_PORT 2 #define BUTTON_PIN 0 -#define UART_DEV LPC_USART3 -#define UART_PORT 0x02 -#define UART_PIN_TX 3 -#define UART_PIN_RX 4 +#define UART_DEV LPC_USART3 +static inline void board_lpc18_pinmux(void) +{ + const PINMUX_GRP_T pinmuxing[] = + { + // LEDs + { 0xD, 10, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC4) }, + { 0xD, 11, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC4 | SCU_MODE_PULLDOWN) }, + { 0xD, 12, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC4 | SCU_MODE_PULLDOWN) }, + { 0xD, 13, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC4 | SCU_MODE_PULLDOWN) }, + { 0xD, 14, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC4 | SCU_MODE_PULLDOWN) }, + { 0x9, 0, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC0 | SCU_MODE_PULLDOWN) }, + { 0x9, 1, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC0 | SCU_MODE_PULLDOWN) }, + { 0x9, 2, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC0 | SCU_MODE_PULLDOWN) }, + + // Button + { 0x4, 0, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC0 | SCU_MODE_PULLUP) }, + + // UART + { 2, 3, SCU_MODE_PULLDOWN | SCU_MODE_FUNC2 }, + { 2, 4, SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_FUNC2 }, + + // USB0 + { 0x6, 3, SCU_MODE_PULLUP | SCU_MODE_INBUFF_EN | SCU_MODE_FUNC1 }, // P6_3 USB0_PWR_EN, USB0 VBus function + + { 0x9, 5, SCU_MODE_PULLUP | SCU_MODE_INBUFF_EN | SCU_MODE_FUNC2 }, // P9_5 USB1_VBUS_EN, USB1 VBus function + { 0x2, 5, SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_FUNC2 }, // P2_5 USB1_VBUS, MUST CONFIGURE THIS SIGNAL FOR USB1 NORMAL OPERATION + }; + + Chip_SCU_SetPinMuxing(pinmuxing, sizeof(pinmuxing) / sizeof(PINMUX_GRP_T)); + + /* Pin clock mux values, re-used structure, value in first index is meaningless */ + const PINMUX_GRP_T pinclockmuxing[] = + { + { 0, 0, (SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_HIGHSPEEDSLEW_EN | SCU_MODE_FUNC0)}, + { 0, 1, (SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_HIGHSPEEDSLEW_EN | SCU_MODE_FUNC0)}, + { 0, 2, (SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_HIGHSPEEDSLEW_EN | SCU_MODE_FUNC0)}, + { 0, 3, (SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_HIGHSPEEDSLEW_EN | SCU_MODE_FUNC0)}, + }; + + /* Clock pins only, group field not used */ + for (uint32_t i = 0; i < (sizeof(pinclockmuxing) / sizeof(pinclockmuxing[0])); i++) + { + Chip_SCU_ClockPinMuxSet(pinclockmuxing[i].pinnum, pinclockmuxing[i].modefunc); + } +} #ifdef __cplusplus } diff --git a/hw/bsp/lpc18/boards/mcb1800/board.mk b/hw/bsp/lpc18/boards/mcb1800/board.mk index d601c5773..0307a21d6 100644 --- a/hw/bsp/lpc18/boards/mcb1800/board.mk +++ b/hw/bsp/lpc18/boards/mcb1800/board.mk @@ -2,3 +2,6 @@ LD_FILE = $(BOARD_PATH)/lpc1857.ld # For flash-jlink target JLINK_DEVICE = LPC1857 + +# flash using jlink +flash: flash-jlink diff --git a/hw/bsp/lpc18/boards/mcb1800/lpc1857.ld b/hw/bsp/lpc18/boards/mcb1800/lpc1857.ld index 983b41eb0..9a308e342 100644 --- a/hw/bsp/lpc18/boards/mcb1800/lpc1857.ld +++ b/hw/bsp/lpc18/boards/mcb1800/lpc1857.ld @@ -20,35 +20,35 @@ MEMORY RamAHB_ETB16 (rwx) : ORIGIN = 0x2000c000, LENGTH = 0x4000 /* 16K bytes (alias RAM5) */ } - /* Define a symbol for the top of each memory region */ - __base_MFlashA512 = 0x1a000000 ; /* MFlashA512 */ - __base_Flash = 0x1a000000 ; /* Flash */ - __top_MFlashA512 = 0x1a000000 + 0x80000 ; /* 512K bytes */ - __top_Flash = 0x1a000000 + 0x80000 ; /* 512K bytes */ - __base_MFlashB512 = 0x1b000000 ; /* MFlashB512 */ - __base_Flash2 = 0x1b000000 ; /* Flash2 */ - __top_MFlashB512 = 0x1b000000 + 0x80000 ; /* 512K bytes */ - __top_Flash2 = 0x1b000000 + 0x80000 ; /* 512K bytes */ - __base_RamLoc32 = 0x10000000 ; /* RamLoc32 */ - __base_RAM = 0x10000000 ; /* RAM */ - __top_RamLoc32 = 0x10000000 + 0x8000 ; /* 32K bytes */ - __top_RAM = 0x10000000 + 0x8000 ; /* 32K bytes */ - __base_RamLoc40 = 0x10080000 ; /* RamLoc40 */ - __base_RAM2 = 0x10080000 ; /* RAM2 */ - __top_RamLoc40 = 0x10080000 + 0xa000 ; /* 40K bytes */ - __top_RAM2 = 0x10080000 + 0xa000 ; /* 40K bytes */ - __base_RamAHB32 = 0x20000000 ; /* RamAHB32 */ - __base_RAM3 = 0x20000000 ; /* RAM3 */ - __top_RamAHB32 = 0x20000000 + 0x8000 ; /* 32K bytes */ - __top_RAM3 = 0x20000000 + 0x8000 ; /* 32K bytes */ - __base_RamAHB16 = 0x20008000 ; /* RamAHB16 */ - __base_RAM4 = 0x20008000 ; /* RAM4 */ - __top_RamAHB16 = 0x20008000 + 0x4000 ; /* 16K bytes */ - __top_RAM4 = 0x20008000 + 0x4000 ; /* 16K bytes */ - __base_RamAHB_ETB16 = 0x2000c000 ; /* RamAHB_ETB16 */ - __base_RAM5 = 0x2000c000 ; /* RAM5 */ - __top_RamAHB_ETB16 = 0x2000c000 + 0x4000 ; /* 16K bytes */ - __top_RAM5 = 0x2000c000 + 0x4000 ; /* 16K bytes */ +/* Define a symbol for the top of each memory region */ +__base_MFlashA512 = 0x1a000000 ; /* MFlashA512 */ +__base_Flash = 0x1a000000 ; /* Flash */ +__top_MFlashA512 = 0x1a000000 + 0x80000 ; /* 512K bytes */ +__top_Flash = 0x1a000000 + 0x80000 ; /* 512K bytes */ +__base_MFlashB512 = 0x1b000000 ; /* MFlashB512 */ +__base_Flash2 = 0x1b000000 ; /* Flash2 */ +__top_MFlashB512 = 0x1b000000 + 0x80000 ; /* 512K bytes */ +__top_Flash2 = 0x1b000000 + 0x80000 ; /* 512K bytes */ +__base_RamLoc32 = 0x10000000 ; /* RamLoc32 */ +__base_RAM = 0x10000000 ; /* RAM */ +__top_RamLoc32 = 0x10000000 + 0x8000 ; /* 32K bytes */ +__top_RAM = 0x10000000 + 0x8000 ; /* 32K bytes */ +__base_RamLoc40 = 0x10080000 ; /* RamLoc40 */ +__base_RAM2 = 0x10080000 ; /* RAM2 */ +__top_RamLoc40 = 0x10080000 + 0xa000 ; /* 40K bytes */ +__top_RAM2 = 0x10080000 + 0xa000 ; /* 40K bytes */ +__base_RamAHB32 = 0x20000000 ; /* RamAHB32 */ +__base_RAM3 = 0x20000000 ; /* RAM3 */ +__top_RamAHB32 = 0x20000000 + 0x8000 ; /* 32K bytes */ +__top_RAM3 = 0x20000000 + 0x8000 ; /* 32K bytes */ +__base_RamAHB16 = 0x20008000 ; /* RamAHB16 */ +__base_RAM4 = 0x20008000 ; /* RAM4 */ +__top_RamAHB16 = 0x20008000 + 0x4000 ; /* 16K bytes */ +__top_RAM4 = 0x20008000 + 0x4000 ; /* 16K bytes */ +__base_RamAHB_ETB16 = 0x2000c000 ; /* RamAHB_ETB16 */ +__base_RAM5 = 0x2000c000 ; /* RAM5 */ +__top_RamAHB_ETB16 = 0x2000c000 + 0x4000 ; /* 16K bytes */ +__top_RAM5 = 0x2000c000 + 0x4000 ; /* 16K bytes */ ENTRY(ResetISR) diff --git a/hw/bsp/lpc18/family.c b/hw/bsp/lpc18/family.c index 441e98028..d74ebcd33 100644 --- a/hw/bsp/lpc18/family.c +++ b/hw/bsp/lpc18/family.c @@ -62,41 +62,6 @@ void USB1_IRQHandler(void) const uint32_t OscRateIn = 12000000; const uint32_t ExtRateIn = 0; -static const PINMUX_GRP_T pinmuxing[] = -{ - // LEDs - { 0xD, 10, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC4) }, - { 0xD, 11, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC4 | SCU_MODE_PULLDOWN) }, - { 0xD, 12, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC4 | SCU_MODE_PULLDOWN) }, - { 0xD, 13, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC4 | SCU_MODE_PULLDOWN) }, - { 0xD, 14, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC4 | SCU_MODE_PULLDOWN) }, - { 0x9, 0, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC0 | SCU_MODE_PULLDOWN) }, - { 0x9, 1, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC0 | SCU_MODE_PULLDOWN) }, - { 0x9, 2, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC0 | SCU_MODE_PULLDOWN) }, - - // Button - { 0x4, 0, (SCU_MODE_INBUFF_EN | SCU_MODE_INACT | SCU_MODE_FUNC0 | SCU_MODE_PULLUP) }, - - // UART - { UART_PORT, UART_PIN_TX, SCU_MODE_PULLDOWN | SCU_MODE_FUNC2 }, - { UART_PORT, UART_PIN_RX, SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_FUNC2 }, - - // USB0 - { 0x6, 3, SCU_MODE_PULLUP | SCU_MODE_INBUFF_EN | SCU_MODE_FUNC1 }, // P6_3 USB0_PWR_EN, USB0 VBus function - - { 0x9, 5, SCU_MODE_PULLUP | SCU_MODE_INBUFF_EN | SCU_MODE_FUNC2 }, // P9_5 USB1_VBUS_EN, USB1 VBus function - { 0x2, 5, SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_FUNC2 }, // P2_5 USB1_VBUS, MUST CONFIGURE THIS SIGNAL FOR USB1 NORMAL OPERATION -}; - -/* Pin clock mux values, re-used structure, value in first index is meaningless */ -static const PINMUX_GRP_T pinclockmuxing[] = -{ - { 0, 0, (SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_HIGHSPEEDSLEW_EN | SCU_MODE_FUNC0)}, - { 0, 1, (SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_HIGHSPEEDSLEW_EN | SCU_MODE_FUNC0)}, - { 0, 2, (SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_HIGHSPEEDSLEW_EN | SCU_MODE_FUNC0)}, - { 0, 3, (SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_HIGHSPEEDSLEW_EN | SCU_MODE_FUNC0)}, -}; - // Invoked by startup code void SystemInit(void) { @@ -106,15 +71,7 @@ void SystemInit(void) *pSCB_VTOR = (unsigned int) g_pfnVectors; #endif - /* Setup system level pin muxing */ - Chip_SCU_SetPinMuxing(pinmuxing, sizeof(pinmuxing) / sizeof(PINMUX_GRP_T)); - - /* Clock pins only, group field not used */ - for (uint32_t i = 0; i < (sizeof(pinclockmuxing) / sizeof(pinclockmuxing[0])); i++) - { - Chip_SCU_ClockPinMuxSet(pinclockmuxing[i].pinnum, pinclockmuxing[i].modefunc); - } - + board_lpc18_pinmux(); Chip_SetupXtalClocking(); } diff --git a/hw/bsp/lpc18/family.mk b/hw/bsp/lpc18/family.mk index 9d10d4c7e..c9c4ce83a 100644 --- a/hw/bsp/lpc18/family.mk +++ b/hw/bsp/lpc18/family.mk @@ -36,6 +36,3 @@ CHIP_FAMILY = transdimension # For freeRTOS port source FREERTOS_PORT = ARM_CM3 - -# flash using jlink -flash: flash-jlink -- cgit v1.3.1 From 5799c471f1214f3a3069b494c5e023e88f63e420 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 3 Mar 2021 20:07:17 +0700 Subject: group h743eval and h743nucleo into stm32h7 tested and work well --- examples/make.mk | 13 +- hw/bsp/stm32f7/family.c | 8 +- hw/bsp/stm32f7/family.mk | 3 +- hw/bsp/stm32h7/boards/stm32h743eval/board.h | 132 ++++++ hw/bsp/stm32h7/boards/stm32h743eval/board.mk | 13 + .../boards/stm32h743eval/stm32h743xx_flash.ld | 173 ++++++++ hw/bsp/stm32h7/boards/stm32h743nucleo/board.h | 116 +++++ hw/bsp/stm32h7/boards/stm32h743nucleo/board.mk | 13 + .../boards/stm32h743nucleo/stm32h743xx_flash.ld | 173 ++++++++ hw/bsp/stm32h7/family.c | 283 ++++++++++++ hw/bsp/stm32h7/family.mk | 54 +++ hw/bsp/stm32h7/stm32h7xx_hal_conf.h | 483 +++++++++++++++++++++ hw/bsp/stm32h743eval/STM32H743XIHx_FLASH.ld | 173 -------- hw/bsp/stm32h743eval/board.mk | 63 --- hw/bsp/stm32h743eval/stm32h743eval.c | 395 ----------------- hw/bsp/stm32h743eval/stm32h7xx_hal_conf.h | 482 -------------------- hw/bsp/stm32h743nucleo/STM32H743ZITx_FLASH.ld | 173 -------- hw/bsp/stm32h743nucleo/board.mk | 49 --- hw/bsp/stm32h743nucleo/stm32h743nucleo.c | 283 ------------ hw/bsp/stm32h743nucleo/stm32h7xx_hal_conf.h | 481 -------------------- 20 files changed, 1453 insertions(+), 2110 deletions(-) create mode 100644 hw/bsp/stm32h7/boards/stm32h743eval/board.h create mode 100644 hw/bsp/stm32h7/boards/stm32h743eval/board.mk create mode 100644 hw/bsp/stm32h7/boards/stm32h743eval/stm32h743xx_flash.ld create mode 100644 hw/bsp/stm32h7/boards/stm32h743nucleo/board.h create mode 100644 hw/bsp/stm32h7/boards/stm32h743nucleo/board.mk create mode 100644 hw/bsp/stm32h7/boards/stm32h743nucleo/stm32h743xx_flash.ld create mode 100644 hw/bsp/stm32h7/family.c create mode 100644 hw/bsp/stm32h7/family.mk create mode 100644 hw/bsp/stm32h7/stm32h7xx_hal_conf.h delete mode 100644 hw/bsp/stm32h743eval/STM32H743XIHx_FLASH.ld delete mode 100644 hw/bsp/stm32h743eval/board.mk delete mode 100644 hw/bsp/stm32h743eval/stm32h743eval.c delete mode 100644 hw/bsp/stm32h743eval/stm32h7xx_hal_conf.h delete mode 100644 hw/bsp/stm32h743nucleo/STM32H743ZITx_FLASH.ld delete mode 100644 hw/bsp/stm32h743nucleo/board.mk delete mode 100644 hw/bsp/stm32h743nucleo/stm32h743nucleo.c delete mode 100644 hw/bsp/stm32h743nucleo/stm32h7xx_hal_conf.h diff --git a/examples/make.mk b/examples/make.mk index 173f5598a..b29d0e4a2 100644 --- a/examples/make.mk +++ b/examples/make.mk @@ -66,13 +66,14 @@ CXX = $(CROSS_COMPILE)g++ OBJCOPY = $(CROSS_COMPILE)objcopy SIZE = $(CROSS_COMPILE)size MKDIR = mkdir + ifeq ($(CMDEXE),1) -CP = copy -RM = del + CP = copy + RM = del else -SED = sed -CP = cp -RM = rm + SED = sed + CP = cp + RM = rm endif #-------------- Source files and compiler flags -------------- @@ -81,6 +82,8 @@ endif SRC_C += hw/bsp/board.c SRC_C += $(subst $(TOP)/,,$(wildcard $(TOP)/$(BOARD_PATH)/*.c)) +INC += $(TOP)/$(FAMILY_PATH) + # Compiler Flags CFLAGS += \ -ggdb \ diff --git a/hw/bsp/stm32f7/family.c b/hw/bsp/stm32f7/family.c index 1649e935f..c0d324598 100644 --- a/hw/bsp/stm32f7/family.c +++ b/hw/bsp/stm32f7/family.c @@ -55,7 +55,7 @@ void board_init(void) { board_clock_init(); - // Enable peripherals clocks + // Enable All GPIOs clocks __HAL_RCC_GPIOA_CLK_ENABLE(); __HAL_RCC_GPIOB_CLK_ENABLE(); __HAL_RCC_GPIOC_CLK_ENABLE(); @@ -154,7 +154,7 @@ void board_init(void) // B-peripheral session valid override enable USB_OTG_FS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOEN; USB_OTG_FS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOVAL; -#endif +#endif // vbus sense #else // OTG_HS @@ -231,7 +231,7 @@ void board_init(void) HAL_GPIO_Init(GPIOI, &GPIO_InitStruct); #endif // USB_HS_PHYC - /* Enable USB HS & ULPI Clocks */ + // Enable USB HS & ULPI Clocks __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE(); __HAL_RCC_USB_OTG_HS_CLK_ENABLE(); @@ -260,7 +260,7 @@ void board_init(void) void board_led_write(bool state) { - HAL_GPIO_WritePin(LED_PORT, LED_PIN, state); + HAL_GPIO_WritePin(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); } uint32_t board_button_read(void) diff --git a/hw/bsp/stm32f7/family.mk b/hw/bsp/stm32f7/family.mk index 680fd3b14..a0f51df86 100644 --- a/hw/bsp/stm32f7/family.mk +++ b/hw/bsp/stm32f7/family.mk @@ -47,8 +47,7 @@ INC += \ $(TOP)/$(BOARD_PATH) \ $(TOP)/lib/CMSIS_5/CMSIS/Core/Include \ $(TOP)/$(ST_CMSIS)/Include \ - $(TOP)/$(ST_HAL_DRIVER)/Inc \ - $(TOP)/hw/bsp/$(BOARD) + $(TOP)/$(ST_HAL_DRIVER)/Inc # For TinyUSB port source VENDOR = st diff --git a/hw/bsp/stm32h7/boards/stm32h743eval/board.h b/hw/bsp/stm32h7/boards/stm32h743eval/board.h new file mode 100644 index 000000000..ab263d2b7 --- /dev/null +++ b/hw/bsp/stm32h7/boards/stm32h743eval/board.h @@ -0,0 +1,132 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2021, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +#define LED_PORT GPIOA +#define LED_PIN GPIO_PIN_4 +#define LED_STATE_ON 1 + +// Tamper push-button +#define BUTTON_PORT GPIOC +#define BUTTON_PIN GPIO_PIN_13 +#define BUTTON_STATE_ACTIVE 0 + +// Need to change jumper setting J7 and J8 from RS-232 to STLink +#define UART_DEV USART1 +#define UART_CLK_EN __HAL_RCC_USART1_CLK_ENABLE +#define UART_GPIO_PORT GPIOB +#define UART_GPIO_AF GPIO_AF4_USART1 +#define UART_TX_PIN GPIO_PIN_14 +#define UART_RX_PIN GPIO_PIN_15 + +// VBUS Sense detection +#define OTG_FS_VBUS_SENSE 1 +#define OTG_HS_VBUS_SENSE 0 + +//--------------------------------------------------------------------+ +// RCC Clock +//--------------------------------------------------------------------+ +static inline void board_stm32h7_clock_init(void) +{ + RCC_ClkInitTypeDef RCC_ClkInitStruct; + RCC_OscInitTypeDef RCC_OscInitStruct; + RCC_PeriphCLKInitTypeDef PeriphClkInitStruct; + + /*!< Supply configuration update enable */ + HAL_PWREx_ConfigSupply(PWR_LDO_SUPPLY); + + /* The voltage scaling allows optimizing the power consumption when the device is + clocked below the maximum system frequency, to update the voltage scaling value + regarding system frequency refer to product datasheet. */ + __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1); + + while ((PWR->D3CR & (PWR_D3CR_VOSRDY)) != PWR_D3CR_VOSRDY) {} + + /* Enable HSE Oscillator and activate PLL with HSE as source */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; + RCC_OscInitStruct.HSEState = RCC_HSE_ON; + RCC_OscInitStruct.HSIState = RCC_HSI_OFF; + RCC_OscInitStruct.CSIState = RCC_CSI_OFF; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; + + /* PLL1 for System Clock */ + RCC_OscInitStruct.PLL.PLLM = 5; + RCC_OscInitStruct.PLL.PLLN = 160; + RCC_OscInitStruct.PLL.PLLFRACN = 0; + RCC_OscInitStruct.PLL.PLLP = 2; + RCC_OscInitStruct.PLL.PLLR = 2; + RCC_OscInitStruct.PLL.PLLQ = 4; + + RCC_OscInitStruct.PLL.PLLVCOSEL = RCC_PLL1VCOMEDIUM; + RCC_OscInitStruct.PLL.PLLRGE = RCC_PLL1VCIRANGE_2; + HAL_RCC_OscConfig(&RCC_OscInitStruct); + + /* PLL3 for USB Clock */ + PeriphClkInitStruct.PLL3.PLL3M = 25; + PeriphClkInitStruct.PLL3.PLL3N = 336; + PeriphClkInitStruct.PLL3.PLL3FRACN = 0; + PeriphClkInitStruct.PLL3.PLL3P = 2; + PeriphClkInitStruct.PLL3.PLL3R = 2; + PeriphClkInitStruct.PLL3.PLL3Q = 7; + + PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_USB; + PeriphClkInitStruct.UsbClockSelection = RCC_USBCLKSOURCE_PLL3; + HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct); + + /* Select PLL as system clock source and configure bus clocks dividers */ + RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_D1PCLK1 | RCC_CLOCKTYPE_PCLK1 | \ + RCC_CLOCKTYPE_PCLK2 | RCC_CLOCKTYPE_D3PCLK1); + + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.SYSCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.AHBCLKDivider = RCC_HCLK_DIV2; + RCC_ClkInitStruct.APB1CLKDivider = RCC_APB1_DIV2; + RCC_ClkInitStruct.APB2CLKDivider = RCC_APB2_DIV2; + RCC_ClkInitStruct.APB3CLKDivider = RCC_APB3_DIV1; + HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_4); + + /*activate CSI clock mondatory for I/O Compensation Cell*/ + __HAL_RCC_CSI_ENABLE() ; + + /* Enable SYSCFG clock mondatory for I/O Compensation Cell */ + __HAL_RCC_SYSCFG_CLK_ENABLE() ; + + /* Enables the I/O Compensation Cell */ + HAL_EnableCompensationCell(); +} + +#ifdef __cplusplus + } +#endif + +#endif diff --git a/hw/bsp/stm32h7/boards/stm32h743eval/board.mk b/hw/bsp/stm32h7/boards/stm32h743eval/board.mk new file mode 100644 index 000000000..96d14a795 --- /dev/null +++ b/hw/bsp/stm32h7/boards/stm32h743eval/board.mk @@ -0,0 +1,13 @@ +CFLAGS += -DSTM32H743xx -DHSE_VALUE=25000000 + +# Default is Highspeed port +PORT ?= 1 + +SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32h743xx.s +LD_FILE = $(BOARD_PATH)/stm32h743xx_flash.ld + +# For flash-jlink target +JLINK_DEVICE = stm32h743xi + +# flash target using on-board stlink +flash: flash-stlink diff --git a/hw/bsp/stm32h7/boards/stm32h743eval/stm32h743xx_flash.ld b/hw/bsp/stm32h7/boards/stm32h743eval/stm32h743xx_flash.ld new file mode 100644 index 000000000..59b9ff4df --- /dev/null +++ b/hw/bsp/stm32h7/boards/stm32h743eval/stm32h743xx_flash.ld @@ -0,0 +1,173 @@ +/* +***************************************************************************** +** + +** File : LinkerScript.ld +** +** Abstract : Linker script for STM32H743XIHx Device with +** 2048KByte FLASH, 128KByte RAM +** +** Set heap size, stack size and stack location according +** to application requirements. +** +** Set memory bank area and size if external memory is used. +** +** Target : STMicroelectronics STM32 +** +** +** Distribution: The file is distributed as is, without any warranty +** of any kind. +** +** (c)Copyright Ac6. +** You may use this file as-is or modify it according to the needs of your +** project. Distribution of this file (unmodified or modified) is not +** permitted. Ac6 permit registered System Workbench for MCU users the +** rights to distribute the assembled, compiled & linked contents of this +** file as part of an application binary file, provided that it is built +** using the System Workbench for MCU toolchain. +** +***************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = 0x20020000; /* end of RAM */ +/* Generate a link error if heap and stack don't fit into RAM */ +_Min_Heap_Size = 0x200; /* required amount of heap */ +_Min_Stack_Size = 0x400; /* required amount of stack */ + +/* Specify the memory areas */ +MEMORY +{ +DTCMRAM (xrw) : ORIGIN = 0x20000000, LENGTH = 128K +RAM_D1 (xrw) : ORIGIN = 0x24000000, LENGTH = 512K +RAM_D2 (xrw) : ORIGIN = 0x30000000, LENGTH = 288K +RAM_D3 (xrw) : ORIGIN = 0x38000000, LENGTH = 64K +ITCMRAM (xrw) : ORIGIN = 0x00000000, LENGTH = 64K +FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 2048K +} + +/* Define output sections */ +SECTIONS +{ + /* The startup code goes first into FLASH */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data goes into FLASH */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data goes into FLASH */ + .rodata : + { + . = ALIGN(4); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(4); + } >FLASH + + .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH + .ARM : { + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + } >FLASH + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } >FLASH + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + } >FLASH + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + } >FLASH + + /* used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections goes into RAM, load LMA copy after code */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + } >DTCMRAM AT> FLASH + + + /* Uninitialized data section */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss secion */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >DTCMRAM + + /* User_heap_stack section, used to check that there is enough RAM left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >DTCMRAM + + + + /* Remove information from the standard libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} + + diff --git a/hw/bsp/stm32h7/boards/stm32h743nucleo/board.h b/hw/bsp/stm32h7/boards/stm32h743nucleo/board.h new file mode 100644 index 000000000..3a31783a8 --- /dev/null +++ b/hw/bsp/stm32h7/boards/stm32h743nucleo/board.h @@ -0,0 +1,116 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2021, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +#define LED_PORT GPIOB +#define LED_PIN GPIO_PIN_0 +#define LED_STATE_ON 1 + +#define BUTTON_PORT GPIOC +#define BUTTON_PIN GPIO_PIN_13 +#define BUTTON_STATE_ACTIVE 1 + +#define UART_DEV USART3 +#define UART_CLK_EN __HAL_RCC_USART3_CLK_ENABLE +#define UART_GPIO_PORT GPIOD +#define UART_GPIO_AF GPIO_AF7_USART3 +#define UART_TX_PIN GPIO_PIN_8 +#define UART_RX_PIN GPIO_PIN_9 + +// VBUS Sense detection +#define OTG_FS_VBUS_SENSE 1 +#define OTG_HS_VBUS_SENSE 0 + +//--------------------------------------------------------------------+ +// RCC Clock +//--------------------------------------------------------------------+ +static inline void board_stm32h7_clock_init(void) +{ + RCC_ClkInitTypeDef RCC_ClkInitStruct; + RCC_OscInitTypeDef RCC_OscInitStruct; + + /* The PWR block is always enabled on the H7 series- there is no clock + enable. For now, use the default VOS3 scale mode (lowest) and limit clock + frequencies to avoid potential current draw problems from bus + power when using the max clock speeds throughout the chip. */ + + /* Enable HSE Oscillator and activate PLL1 with HSE as source */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; + RCC_OscInitStruct.HSEState = RCC_HSE_ON; + RCC_OscInitStruct.HSIState = RCC_HSI_OFF; + RCC_OscInitStruct.CSIState = RCC_CSI_OFF; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; + RCC_OscInitStruct.PLL.PLLM = HSE_VALUE/1000000; + RCC_OscInitStruct.PLL.PLLN = 336; + RCC_OscInitStruct.PLL.PLLP = 2; + RCC_OscInitStruct.PLL.PLLQ = 7; + RCC_OscInitStruct.PLL.PLLR = 2; /* Unused */ + RCC_OscInitStruct.PLL.PLLRGE = RCC_PLL1VCIRANGE_0; + RCC_OscInitStruct.PLL.PLLVCOSEL = RCC_PLL1VCOMEDIUM; + RCC_OscInitStruct.PLL.PLLFRACN = 0; + HAL_RCC_OscConfig(&RCC_OscInitStruct); + + RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | \ + RCC_CLOCKTYPE_D1PCLK1 | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2 | \ + RCC_CLOCKTYPE_D3PCLK1); + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.SYSCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.AHBCLKDivider = RCC_HCLK_DIV1; + + /* Unlike on the STM32F4 family, it appears the maximum APB frequencies are + device-dependent- 120 MHz for this board according to Figure 2 of + the datasheet. Dividing by half will be safe for now. */ + RCC_ClkInitStruct.APB3CLKDivider = RCC_APB3_DIV2; + RCC_ClkInitStruct.APB1CLKDivider = RCC_APB1_DIV2; + RCC_ClkInitStruct.APB2CLKDivider = RCC_APB2_DIV2; + RCC_ClkInitStruct.APB4CLKDivider = RCC_APB4_DIV2; + + /* 4 wait states required for 168MHz and VOS3. */ + HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_4); + + /* Like on F4, on H7, USB's actual peripheral clock and bus clock are + separate. However, the main system PLL (PLL1) doesn't have a direct + connection to the USB peripheral clock to generate 48 MHz, so we do this + dance. This will connect PLL1's Q output to the USB peripheral clock. */ + RCC_PeriphCLKInitTypeDef RCC_PeriphCLKInitStruct; + + RCC_PeriphCLKInitStruct.PeriphClockSelection = RCC_PERIPHCLK_USB; + RCC_PeriphCLKInitStruct.UsbClockSelection = RCC_USBCLKSOURCE_PLL; + HAL_RCCEx_PeriphCLKConfig(&RCC_PeriphCLKInitStruct); +} + +#ifdef __cplusplus + } +#endif + +#endif diff --git a/hw/bsp/stm32h7/boards/stm32h743nucleo/board.mk b/hw/bsp/stm32h7/boards/stm32h743nucleo/board.mk new file mode 100644 index 000000000..fc670fe76 --- /dev/null +++ b/hw/bsp/stm32h7/boards/stm32h743nucleo/board.mk @@ -0,0 +1,13 @@ +CFLAGS += -DSTM32H743xx -DHSE_VALUE=8000000 + +# Default is FulSpeed port +PORT ?= 0 + +SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32h743xx.s +LD_FILE = $(BOARD_PATH)/stm32h743xx_flash.ld + +# For flash-jlink target +JLINK_DEVICE = stm32h743zi + +# flash target using on-board stlink +flash: flash-stlink diff --git a/hw/bsp/stm32h7/boards/stm32h743nucleo/stm32h743xx_flash.ld b/hw/bsp/stm32h7/boards/stm32h743nucleo/stm32h743xx_flash.ld new file mode 100644 index 000000000..59b9ff4df --- /dev/null +++ b/hw/bsp/stm32h7/boards/stm32h743nucleo/stm32h743xx_flash.ld @@ -0,0 +1,173 @@ +/* +***************************************************************************** +** + +** File : LinkerScript.ld +** +** Abstract : Linker script for STM32H743XIHx Device with +** 2048KByte FLASH, 128KByte RAM +** +** Set heap size, stack size and stack location according +** to application requirements. +** +** Set memory bank area and size if external memory is used. +** +** Target : STMicroelectronics STM32 +** +** +** Distribution: The file is distributed as is, without any warranty +** of any kind. +** +** (c)Copyright Ac6. +** You may use this file as-is or modify it according to the needs of your +** project. Distribution of this file (unmodified or modified) is not +** permitted. Ac6 permit registered System Workbench for MCU users the +** rights to distribute the assembled, compiled & linked contents of this +** file as part of an application binary file, provided that it is built +** using the System Workbench for MCU toolchain. +** +***************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = 0x20020000; /* end of RAM */ +/* Generate a link error if heap and stack don't fit into RAM */ +_Min_Heap_Size = 0x200; /* required amount of heap */ +_Min_Stack_Size = 0x400; /* required amount of stack */ + +/* Specify the memory areas */ +MEMORY +{ +DTCMRAM (xrw) : ORIGIN = 0x20000000, LENGTH = 128K +RAM_D1 (xrw) : ORIGIN = 0x24000000, LENGTH = 512K +RAM_D2 (xrw) : ORIGIN = 0x30000000, LENGTH = 288K +RAM_D3 (xrw) : ORIGIN = 0x38000000, LENGTH = 64K +ITCMRAM (xrw) : ORIGIN = 0x00000000, LENGTH = 64K +FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 2048K +} + +/* Define output sections */ +SECTIONS +{ + /* The startup code goes first into FLASH */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data goes into FLASH */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + /* Constant data goes into FLASH */ + .rodata : + { + . = ALIGN(4); + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + . = ALIGN(4); + } >FLASH + + .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH + .ARM : { + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + } >FLASH + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } >FLASH + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + } >FLASH + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + } >FLASH + + /* used by the startup to initialize data */ + _sidata = LOADADDR(.data); + + /* Initialized data sections goes into RAM, load LMA copy after code */ + .data : + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + } >DTCMRAM AT> FLASH + + + /* Uninitialized data section */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss secion */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >DTCMRAM + + /* User_heap_stack section, used to check that there is enough RAM left */ + ._user_heap_stack : + { + . = ALIGN(8); + PROVIDE ( end = . ); + PROVIDE ( _end = . ); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(8); + } >DTCMRAM + + + + /* Remove information from the standard libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} + + diff --git a/hw/bsp/stm32h7/family.c b/hw/bsp/stm32h7/family.c new file mode 100644 index 000000000..ad17bb9ed --- /dev/null +++ b/hw/bsp/stm32h7/family.c @@ -0,0 +1,283 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2019 William D. Jones (thor0505@comcast.net), + * Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "stm32h7xx_hal.h" +#include "bsp/board.h" +#include "board.h" + +//--------------------------------------------------------------------+ +// Forward USB interrupt events to TinyUSB IRQ Handler +//--------------------------------------------------------------------+ + +// Despite being call USB2_OTG +// OTG_FS is marked as RHPort0 by TinyUSB to be consistent across stm32 port +void OTG_FS_IRQHandler(void) +{ + tud_int_handler(0); +} + +// Despite being call USB2_OTG +// OTG_HS is marked as RHPort1 by TinyUSB to be consistent across stm32 port +void OTG_HS_IRQHandler(void) +{ + tud_int_handler(1); +} + + +//--------------------------------------------------------------------+ +// MACRO TYPEDEF CONSTANT ENUM +//--------------------------------------------------------------------+ + +UART_HandleTypeDef UartHandle; + +void board_init(void) +{ + board_stm32h7_clock_init(); + + // Enable All GPIOs clocks + __HAL_RCC_GPIOA_CLK_ENABLE(); + __HAL_RCC_GPIOB_CLK_ENABLE(); // USB ULPI NXT + __HAL_RCC_GPIOC_CLK_ENABLE(); // USB ULPI NXT + __HAL_RCC_GPIOD_CLK_ENABLE(); + __HAL_RCC_GPIOE_CLK_ENABLE(); + __HAL_RCC_GPIOE_CLK_ENABLE(); + __HAL_RCC_GPIOG_CLK_ENABLE(); + __HAL_RCC_GPIOH_CLK_ENABLE(); // USB ULPI NXT + __HAL_RCC_GPIOI_CLK_ENABLE(); // USB ULPI NXT + + UART_CLK_EN(); + + // 1ms tick timer + SysTick_Config(SystemCoreClock / 1000); + +#if CFG_TUSB_OS == OPT_OS_FREERTOS + // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) + NVIC_SetPriority(OTG_FS_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); + NVIC_SetPriority(OTG_HS_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); +#endif + + GPIO_InitTypeDef GPIO_InitStruct; + + // LED + GPIO_InitStruct.Pin = LED_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; + GPIO_InitStruct.Pull = GPIO_PULLUP; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + HAL_GPIO_Init(LED_PORT, &GPIO_InitStruct); + + // Button + GPIO_InitStruct.Pin = BUTTON_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_INPUT; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + HAL_GPIO_Init(BUTTON_PORT, &GPIO_InitStruct); + + // Uart + GPIO_InitStruct.Pin = UART_TX_PIN | UART_RX_PIN; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_PULLUP; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; + GPIO_InitStruct.Alternate = UART_GPIO_AF; + HAL_GPIO_Init(UART_GPIO_PORT, &GPIO_InitStruct); + + UartHandle.Instance = UART_DEV; + UartHandle.Init.BaudRate = CFG_BOARD_UART_BAUDRATE; + UartHandle.Init.WordLength = UART_WORDLENGTH_8B; + UartHandle.Init.StopBits = UART_STOPBITS_1; + UartHandle.Init.Parity = UART_PARITY_NONE; + UartHandle.Init.HwFlowCtl = UART_HWCONTROL_NONE; + UartHandle.Init.Mode = UART_MODE_TX_RX; + UartHandle.Init.OverSampling = UART_OVERSAMPLING_16; + HAL_UART_Init(&UartHandle); + +#if BOARD_DEVICE_RHPORT_NUM == 0 + // Despite being call USB2_OTG + // OTG_FS is marked as RHPort0 by TinyUSB to be consistent across stm32 port + // PA9 VUSB, PA10 ID, PA11 DM, PA12 DP + + /* Configure DM DP Pins */ + GPIO_InitStruct.Pin = GPIO_PIN_11 | GPIO_PIN_12; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Alternate = GPIO_AF10_OTG2_HS; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + /* This for ID line debug */ + GPIO_InitStruct.Pin = GPIO_PIN_10; + GPIO_InitStruct.Mode = GPIO_MODE_AF_OD; + GPIO_InitStruct.Pull = GPIO_PULLUP; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF10_OTG2_HS; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + // https://community.st.com/s/question/0D50X00009XkYZLSA3/stm32h7-nucleo-usb-fs-cdc + // TODO: Board init actually works fine without this line. + HAL_PWREx_EnableUSBVoltageDetector(); + __HAL_RCC_USB2_OTG_FS_CLK_ENABLE(); + +#if OTG_FS_VBUS_SENSE + /* Configure VBUS Pin */ + GPIO_InitStruct.Pin = GPIO_PIN_9; + GPIO_InitStruct.Mode = GPIO_MODE_INPUT; + GPIO_InitStruct.Pull = GPIO_NOPULL; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + // Enable VBUS sense (B device) via pin PA9 + USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBDEN; +#else + // Disable VBUS sense (B device) via pin PA9 + USB_OTG_FS->GCCFG &= ~USB_OTG_GCCFG_VBDEN; + + // B-peripheral session valid override enable + USB_OTG_FS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOEN; + USB_OTG_FS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOVAL; +#endif // vbus sense + +#elif BOARD_DEVICE_RHPORT_NUM == 1 + // Despite being call USB2_OTG + // OTG_HS is marked as RHPort1 by TinyUSB to be consistent across stm32 port + + /* CLK */ + GPIO_InitStruct.Pin = GPIO_PIN_5; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF10_OTG2_HS; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + /* D0 */ + GPIO_InitStruct.Pin = GPIO_PIN_3; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF10_OTG2_HS; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + /* D1 D2 D3 D4 D5 D6 D7 */ + GPIO_InitStruct.Pin = GPIO_PIN_0 | GPIO_PIN_1 | GPIO_PIN_5 | GPIO_PIN_10 | GPIO_PIN_11 | GPIO_PIN_12 | GPIO_PIN_13; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Alternate = GPIO_AF10_OTG2_HS; + HAL_GPIO_Init(GPIOB, &GPIO_InitStruct); + + /* STP */ + GPIO_InitStruct.Pin = GPIO_PIN_0; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Alternate = GPIO_AF10_OTG2_HS; + HAL_GPIO_Init(GPIOC, &GPIO_InitStruct); + + /* NXT */ + GPIO_InitStruct.Pin = GPIO_PIN_4; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Alternate = GPIO_AF10_OTG2_HS; + HAL_GPIO_Init(GPIOH, &GPIO_InitStruct); + + /* DIR */ + GPIO_InitStruct.Pin = GPIO_PIN_11; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Alternate = GPIO_AF10_OTG2_HS; + HAL_GPIO_Init(GPIOI, &GPIO_InitStruct); + + // Enable USB HS & ULPI Clocks + __HAL_RCC_USB1_OTG_HS_ULPI_CLK_ENABLE(); + __HAL_RCC_USB1_OTG_HS_CLK_ENABLE(); + +#if OTG_HS_VBUS_SENSE + #error OTG HS VBUS Sense enabled is not implemented +#else + // No VBUS sense + USB_OTG_HS->GCCFG &= ~USB_OTG_GCCFG_VBDEN; + + // B-peripheral session valid override enable + USB_OTG_HS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOEN; + USB_OTG_HS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOVAL; +#endif + + // Force device mode + USB_OTG_HS->GUSBCFG &= ~USB_OTG_GUSBCFG_FHMOD; + USB_OTG_HS->GUSBCFG |= USB_OTG_GUSBCFG_FDMOD; + + HAL_PWREx_EnableUSBVoltageDetector(); +#endif // rhport = 1 + +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) +{ + HAL_GPIO_WritePin(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); +} + +uint32_t board_button_read(void) +{ + return (BUTTON_STATE_ACTIVE == HAL_GPIO_ReadPin(BUTTON_PORT, BUTTON_PIN)) ? 1 : 0; +} + +int board_uart_read(uint8_t* buf, int len) +{ + (void) buf; (void) len; + return 0; +} + +int board_uart_write(void const * buf, int len) +{ + HAL_UART_Transmit(&UartHandle, (uint8_t*) buf, len, 0xffff); + return len; +} + + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; +void SysTick_Handler (void) +{ + system_ticks++; +} + +uint32_t board_millis(void) +{ + return system_ticks; +} +#endif + +void HardFault_Handler (void) +{ + asm("bkpt"); +} + +// Required by __libc_init_array in startup code if we are compiling using +// -nostdlib/-nostartfiles. +void _init(void) +{ + +} diff --git a/hw/bsp/stm32h7/family.mk b/hw/bsp/stm32h7/family.mk new file mode 100644 index 000000000..efa9b1aca --- /dev/null +++ b/hw/bsp/stm32h7/family.mk @@ -0,0 +1,54 @@ +UF2_FAMILY_ID = 0x6db66082 +FAMILY_SUBMODULES = hw/mcu/st/cmsis_device_h7 hw/mcu/st/stm32h7xx_hal_driver + +ST_FAMILY = h7 +ST_CMSIS = hw/mcu/st/cmsis_device_$(ST_FAMILY) +ST_HAL_DRIVER = hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver + +include $(TOP)/$(BOARD_PATH)/board.mk + +CFLAGS += \ + -flto \ + -mthumb \ + -mabi=aapcs \ + -mcpu=cortex-m7 \ + -mfloat-abi=hard \ + -mfpu=fpv5-d16 \ + -nostdlib -nostartfiles \ + -DCFG_TUSB_MCU=OPT_MCU_STM32H7 \ + -DBOARD_DEVICE_RHPORT_NUM=$(PORT) + +ifeq ($(PORT), 1) + CFLAGS += -DBOARD_DEVICE_RHPORT_SPEED=OPT_MODE_HIGH_SPEED + $(info "PORT1 High Speed") +else + $(info "PORT0 Full Speed") +endif + +# suppress warning caused by vendor mcu driver +CFLAGS += -Wno-error=maybe-uninitialized -Wno-error=cast-align + +# All source paths should be relative to the top level. +SRC_C += \ + $(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_cortex.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc_ex.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_gpio.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_uart.c \ + $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_pwr_ex.c + +INC += \ + $(TOP)/$(BOARD_PATH) \ + $(TOP)/lib/CMSIS_5/CMSIS/Core/Include \ + $(TOP)/$(ST_CMSIS)/Include \ + $(TOP)/$(ST_HAL_DRIVER)/Inc + +# For TinyUSB port source +VENDOR = st +CHIP_FAMILY = synopsys + +# For freeRTOS port source +FREERTOS_PORT = ARM_CM7/r0p1 + diff --git a/hw/bsp/stm32h7/stm32h7xx_hal_conf.h b/hw/bsp/stm32h7/stm32h7xx_hal_conf.h new file mode 100644 index 000000000..a7cc6d826 --- /dev/null +++ b/hw/bsp/stm32h7/stm32h7xx_hal_conf.h @@ -0,0 +1,483 @@ +/** + ****************************************************************************** + * @file stm32h7xx_hal_conf_template.h + * @brief HAL configuration template file. + * This file should be copied to the application folder and renamed + * to stm32h7xx_hal_conf.h. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2019 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32H7xx_HAL_CONF_H +#define __STM32H7xx_HAL_CONF_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/* ########################## Module Selection ############################## */ +/** + * @brief This is the list of modules to be used in the HAL driver + */ +#define HAL_MODULE_ENABLED +#define HAL_ADC_MODULE_ENABLED +/* #define HAL_CEC_MODULE_ENABLED */ +/* #define HAL_COMP_MODULE_ENABLED */ +#define HAL_CORTEX_MODULE_ENABLED +/* #define HAL_CRC_MODULE_ENABLED */ +/* #define HAL_CRYP_MODULE_ENABLED */ +/* #define HAL_DAC_MODULE_ENABLED */ +/* #define HAL_DCMI_MODULE_ENABLED */ +/* #define HAL_DFSDM_MODULE_ENABLED */ +#define HAL_DMA_MODULE_ENABLED +/* #define HAL_DMA2D_MODULE_ENABLED */ +/* #define HAL_ETH_MODULE_ENABLED */ +/* #define HAL_EXTI_MODULE_ENABLED */ +/* #define HAL_FDCAN_MODULE_ENABLED */ +#define HAL_FLASH_MODULE_ENABLED +#define HAL_GPIO_MODULE_ENABLED +/* #define HAL_HASH_MODULE_ENABLED */ +/* #define HAL_HCD_MODULE_ENABLED */ +/* #define HAL_HRTIM_MODULE_ENABLED */ +/* #define HAL_HSEM_MODULE_ENABLED */ +/* #define HAL_I2C_MODULE_ENABLED */ +/* #define HAL_I2S_MODULE_ENABLED */ +/* #define HAL_IRDA_MODULE_ENABLED */ +/* #define HAL_IWDG_MODULE_ENABLED */ +/* #define HAL_JPEG_MODULE_ENABLED */ +/* #define HAL_LPTIM_MODULE_ENABLED */ +/* #define HAL_LTDC_MODULE_ENABLED */ +/* #define HAL_MDIOS_MODULE_ENABLED */ +/* #define HAL_MDMA_MODULE_ENABLED */ +/* #define HAL_MMC_MODULE_ENABLED */ +/* #define HAL_NAND_MODULE_ENABLED */ +/* #define HAL_NOR_MODULE_ENABLED */ +/* #define HAL_OPAMP_MODULE_ENABLED */ +/* #define HAL_PCD_MODULE_ENABLED */ +#define HAL_PWR_MODULE_ENABLED +/* #define HAL_QSPI_MODULE_ENABLED */ +/* #define HAL_RAMECC_MODULE_ENABLED */ +#define HAL_RCC_MODULE_ENABLED +/* #define HAL_RNG_MODULE_ENABLED */ +/* #define HAL_RTC_MODULE_ENABLED */ +/* #define HAL_SAI_MODULE_ENABLED */ +/* #define HAL_SD_MODULE_ENABLED */ +/* #define HAL_SDRAM_MODULE_ENABLED */ +/* #define HAL_SMARTCARD_MODULE_ENABLED */ +/* #define HAL_SMBUS_MODULE_ENABLED */ +/* #define HAL_SPDIFRX_MODULE_ENABLED */ +#define HAL_SPI_MODULE_ENABLED +/* #define HAL_SRAM_MODULE_ENABLED */ +/* #define HAL_SWPMI_MODULE_ENABLED */ +/* #define HAL_TIM_MODULE_ENABLED */ +#define HAL_UART_MODULE_ENABLED +/* #define HAL_USART_MODULE_ENABLED */ +/* #define HAL_WWDG_MODULE_ENABLED */ + +/* ########################## Oscillator Values adaptation ####################*/ +/** + * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSE is used as system clock source, directly or through the PLL). + */ +#if !defined (HSE_VALUE) +//#define HSE_VALUE ((uint32_t)25000000) /*!< Value of the External oscillator in Hz */ +#error HSE_VALUE is not defined +#endif /* HSE_VALUE */ + +#if !defined (HSE_STARTUP_TIMEOUT) + #define HSE_STARTUP_TIMEOUT ((uint32_t)5000) /*!< Time out for HSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief Internal oscillator (CSI) default value. + * This value is the default CSI value after Reset. + */ +#if !defined (CSI_VALUE) + #define CSI_VALUE ((uint32_t)4000000) /*!< Value of the Internal oscillator in Hz*/ +#endif /* CSI_VALUE */ + +/** + * @brief Internal High Speed oscillator (HSI) value. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSI is used as system clock source, directly or through the PLL). + */ +#if !defined (HSI_VALUE) + #define HSI_VALUE ((uint32_t)64000000) /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +/** + * @brief External Low Speed oscillator (LSE) value. + * This value is used by the UART, RTC HAL module to compute the system frequency + */ +#if !defined (LSE_VALUE) + #define LSE_VALUE ((uint32_t)32768) /*!< Value of the External oscillator in Hz*/ +#endif /* LSE_VALUE */ + + +#if !defined (LSE_STARTUP_TIMEOUT) + #define LSE_STARTUP_TIMEOUT ((uint32_t)5000) /*!< Time out for LSE start up, in ms */ +#endif /* LSE_STARTUP_TIMEOUT */ + +#if !defined (LSI_VALUE) + #define LSI_VALUE ((uint32_t)32000) /*!< LSI Typical Value in Hz*/ +#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz + The real value may vary depending on the variations + in voltage and temperature.*/ + +/** + * @brief External clock source for I2S peripheral + * This value is used by the I2S HAL module to compute the I2S clock source + * frequency, this source is inserted directly through I2S_CKIN pad. + */ +#if !defined (EXTERNAL_CLOCK_VALUE) + #define EXTERNAL_CLOCK_VALUE 12288000U /*!< Value of the External clock in Hz*/ +#endif /* EXTERNAL_CLOCK_VALUE */ + +/* Tip: To avoid modifying this file each time you need to use different HSE, + === you can define the HSE value in your toolchain compiler preprocessor. */ + +/* ########################### System Configuration ######################### */ +/** + * @brief This is the HAL system configuration section + */ +#define VDD_VALUE ((uint32_t)3300) /*!< Value of VDD in mv */ +#define TICK_INT_PRIORITY ((uint32_t)0x0F) /*!< tick interrupt priority */ +#define USE_RTOS 0 +#define USE_SD_TRANSCEIVER 1U /*!< use uSD Transceiver */ +#define USE_SPI_CRC 1U /*!< use CRC in SPI */ + +#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ +#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ +#define USE_HAL_COMP_REGISTER_CALLBACKS 0U /* COMP register callback disabled */ +#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */ +#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ +#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */ +#define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */ +#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */ +#define USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */ +#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */ +#define USE_HAL_FDCAN_REGISTER_CALLBACKS 0U /* FDCAN register callback disabled */ +#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ +#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ +#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */ +#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ +#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */ +#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */ +#define USE_HAL_HRTIM_REGISTER_CALLBACKS 0U /* HRTIM register callback disabled */ +#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ +#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ +#define USE_HAL_JPEG_REGISTER_CALLBACKS 0U /* JPEG register callback disabled */ +#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */ +#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */ +#define USE_HAL_MDIOS_REGISTER_CALLBACKS 0U /* MDIO register callback disabled */ +#define USE_HAL_OPAMP_REGISTER_CALLBACKS 0U /* MDIO register callback disabled */ +#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ +#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */ +#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */ +#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ +#define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */ +#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */ +#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ +#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ +#define USE_HAL_SWPMI_REGISTER_CALLBACKS 0U /* SWPMI register callback disabled */ +#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ +#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ +#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ +#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ + +/* ########################### Ethernet Configuration ######################### */ +#define ETH_TX_DESC_CNT 4 /* number of Ethernet Tx DMA descriptors */ +#define ETH_RX_DESC_CNT 4 /* number of Ethernet Rx DMA descriptors */ + +#define ETH_MAC_ADDR0 ((uint8_t)0x02) +#define ETH_MAC_ADDR1 ((uint8_t)0x00) +#define ETH_MAC_ADDR2 ((uint8_t)0x00) +#define ETH_MAC_ADDR3 ((uint8_t)0x00) +#define ETH_MAC_ADDR4 ((uint8_t)0x00) +#define ETH_MAC_ADDR5 ((uint8_t)0x00) + +/* ########################## Assert Selection ############################## */ +/** + * @brief Uncomment the line below to expanse the "assert_param" macro in the + * HAL drivers code + */ +/* #define USE_FULL_ASSERT 1 */ + + +/* Includes ------------------------------------------------------------------*/ +/** + * @brief Include module's header file + */ + +#ifdef HAL_RCC_MODULE_ENABLED + #include "stm32h7xx_hal_rcc.h" +#endif /* HAL_RCC_MODULE_ENABLED */ + +#ifdef HAL_GPIO_MODULE_ENABLED + #include "stm32h7xx_hal_gpio.h" +#endif /* HAL_GPIO_MODULE_ENABLED */ + +#ifdef HAL_DMA_MODULE_ENABLED + #include "stm32h7xx_hal_dma.h" +#endif /* HAL_DMA_MODULE_ENABLED */ + +#ifdef HAL_MDMA_MODULE_ENABLED + #include "stm32h7xx_hal_mdma.h" +#endif /* HAL_MDMA_MODULE_ENABLED */ + +#ifdef HAL_HASH_MODULE_ENABLED + #include "stm32h7xx_hal_hash.h" +#endif /* HAL_HASH_MODULE_ENABLED */ + +#ifdef HAL_DCMI_MODULE_ENABLED + #include "stm32h7xx_hal_dcmi.h" +#endif /* HAL_DCMI_MODULE_ENABLED */ + +#ifdef HAL_DMA2D_MODULE_ENABLED + #include "stm32h7xx_hal_dma2d.h" +#endif /* HAL_DMA2D_MODULE_ENABLED */ + +#ifdef HAL_DSI_MODULE_ENABLED + #include "stm32h7xx_hal_dsi.h" +#endif /* HAL_DSI_MODULE_ENABLED */ + +#ifdef HAL_DFSDM_MODULE_ENABLED + #include "stm32h7xx_hal_dfsdm.h" +#endif /* HAL_DFSDM_MODULE_ENABLED */ + +#ifdef HAL_ETH_MODULE_ENABLED + #include "stm32h7xx_hal_eth.h" +#endif /* HAL_ETH_MODULE_ENABLED */ + +#ifdef HAL_EXTI_MODULE_ENABLED + #include "stm32h7xx_hal_exti.h" +#endif /* HAL_EXTI_MODULE_ENABLED */ + +#ifdef HAL_CORTEX_MODULE_ENABLED + #include "stm32h7xx_hal_cortex.h" +#endif /* HAL_CORTEX_MODULE_ENABLED */ + +#ifdef HAL_ADC_MODULE_ENABLED + #include "stm32h7xx_hal_adc.h" +#endif /* HAL_ADC_MODULE_ENABLED */ + +#ifdef HAL_FDCAN_MODULE_ENABLED + #include "stm32h7xx_hal_fdcan.h" +#endif /* HAL_FDCAN_MODULE_ENABLED */ + +#ifdef HAL_CEC_MODULE_ENABLED + #include "stm32h7xx_hal_cec.h" +#endif /* HAL_CEC_MODULE_ENABLED */ + +#ifdef HAL_COMP_MODULE_ENABLED + #include "stm32h7xx_hal_comp.h" +#endif /* HAL_COMP_MODULE_ENABLED */ + +#ifdef HAL_CRC_MODULE_ENABLED + #include "stm32h7xx_hal_crc.h" +#endif /* HAL_CRC_MODULE_ENABLED */ + +#ifdef HAL_CRYP_MODULE_ENABLED + #include "stm32h7xx_hal_cryp.h" +#endif /* HAL_CRYP_MODULE_ENABLED */ + +#ifdef HAL_DAC_MODULE_ENABLED + #include "stm32h7xx_hal_dac.h" +#endif /* HAL_DAC_MODULE_ENABLED */ + +#ifdef HAL_FLASH_MODULE_ENABLED + #include "stm32h7xx_hal_flash.h" +#endif /* HAL_FLASH_MODULE_ENABLED */ + +#ifdef HAL_HRTIM_MODULE_ENABLED + #include "stm32h7xx_hal_hrtim.h" +#endif /* HAL_HRTIM_MODULE_ENABLED */ + +#ifdef HAL_HSEM_MODULE_ENABLED + #include "stm32h7xx_hal_hsem.h" +#endif /* HAL_HSEM_MODULE_ENABLED */ + +#ifdef HAL_SRAM_MODULE_ENABLED + #include "stm32h7xx_hal_sram.h" +#endif /* HAL_SRAM_MODULE_ENABLED */ + +#ifdef HAL_NOR_MODULE_ENABLED + #include "stm32h7xx_hal_nor.h" +#endif /* HAL_NOR_MODULE_ENABLED */ + +#ifdef HAL_NAND_MODULE_ENABLED + #include "stm32h7xx_hal_nand.h" +#endif /* HAL_NAND_MODULE_ENABLED */ + +#ifdef HAL_I2C_MODULE_ENABLED + #include "stm32h7xx_hal_i2c.h" +#endif /* HAL_I2C_MODULE_ENABLED */ + +#ifdef HAL_I2S_MODULE_ENABLED + #include "stm32h7xx_hal_i2s.h" +#endif /* HAL_I2S_MODULE_ENABLED */ + +#ifdef HAL_IWDG_MODULE_ENABLED + #include "stm32h7xx_hal_iwdg.h" +#endif /* HAL_IWDG_MODULE_ENABLED */ + +#ifdef HAL_JPEG_MODULE_ENABLED + #include "stm32h7xx_hal_jpeg.h" +#endif /* HAL_JPEG_MODULE_ENABLED */ + +#ifdef HAL_MDIOS_MODULE_ENABLED + #include "stm32h7xx_hal_mdios.h" +#endif /* HAL_MDIOS_MODULE_ENABLED */ + +#ifdef HAL_MMC_MODULE_ENABLED + #include "stm32h7xx_hal_mmc.h" +#endif /* HAL_MMC_MODULE_ENABLED */ + +#ifdef HAL_LPTIM_MODULE_ENABLED +#include "stm32h7xx_hal_lptim.h" +#endif /* HAL_LPTIM_MODULE_ENABLED */ + +#ifdef HAL_LTDC_MODULE_ENABLED +#include "stm32h7xx_hal_ltdc.h" +#endif /* HAL_LTDC_MODULE_ENABLED */ + +#ifdef HAL_OPAMP_MODULE_ENABLED +#include "stm32h7xx_hal_opamp.h" +#endif /* HAL_OPAMP_MODULE_ENABLED */ + +#ifdef HAL_PWR_MODULE_ENABLED + #include "stm32h7xx_hal_pwr.h" +#endif /* HAL_PWR_MODULE_ENABLED */ + +#ifdef HAL_QSPI_MODULE_ENABLED + #include "stm32h7xx_hal_qspi.h" +#endif /* HAL_QSPI_MODULE_ENABLED */ + +#ifdef HAL_RAMECC_MODULE_ENABLED + #include "stm32h7xx_hal_ramecc.h" +#endif /* HAL_HCD_MODULE_ENABLED */ + +#ifdef HAL_RNG_MODULE_ENABLED + #include "stm32h7xx_hal_rng.h" +#endif /* HAL_RNG_MODULE_ENABLED */ + +#ifdef HAL_RTC_MODULE_ENABLED + #include "stm32h7xx_hal_rtc.h" +#endif /* HAL_RTC_MODULE_ENABLED */ + +#ifdef HAL_SAI_MODULE_ENABLED + #include "stm32h7xx_hal_sai.h" +#endif /* HAL_SAI_MODULE_ENABLED */ + +#ifdef HAL_SD_MODULE_ENABLED + #include "stm32h7xx_hal_sd.h" +#endif /* HAL_SD_MODULE_ENABLED */ + +#ifdef HAL_SDRAM_MODULE_ENABLED + #include "stm32h7xx_hal_sdram.h" +#endif /* HAL_SDRAM_MODULE_ENABLED */ + +#ifdef HAL_SPI_MODULE_ENABLED + #include "stm32h7xx_hal_spi.h" +#endif /* HAL_SPI_MODULE_ENABLED */ + +#ifdef HAL_SPDIFRX_MODULE_ENABLED + #include "stm32h7xx_hal_spdifrx.h" +#endif /* HAL_SPDIFRX_MODULE_ENABLED */ + +#ifdef HAL_SWPMI_MODULE_ENABLED + #include "stm32h7xx_hal_swpmi.h" +#endif /* HAL_SWPMI_MODULE_ENABLED */ + +#ifdef HAL_TIM_MODULE_ENABLED + #include "stm32h7xx_hal_tim.h" +#endif /* HAL_TIM_MODULE_ENABLED */ + +#ifdef HAL_UART_MODULE_ENABLED + #include "stm32h7xx_hal_uart.h" +#endif /* HAL_UART_MODULE_ENABLED */ + +#ifdef HAL_USART_MODULE_ENABLED + #include "stm32h7xx_hal_usart.h" +#endif /* HAL_USART_MODULE_ENABLED */ + +#ifdef HAL_IRDA_MODULE_ENABLED + #include "stm32h7xx_hal_irda.h" +#endif /* HAL_IRDA_MODULE_ENABLED */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED + #include "stm32h7xx_hal_smartcard.h" +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ + +#ifdef HAL_SMBUS_MODULE_ENABLED + #include "stm32h7xx_hal_smbus.h" +#endif /* HAL_SMBUS_MODULE_ENABLED */ + +#ifdef HAL_WWDG_MODULE_ENABLED + #include "stm32h7xx_hal_wwdg.h" +#endif /* HAL_WWDG_MODULE_ENABLED */ + +#ifdef HAL_PCD_MODULE_ENABLED + #include "stm32h7xx_hal_pcd.h" +#endif /* HAL_PCD_MODULE_ENABLED */ + +#ifdef HAL_HCD_MODULE_ENABLED + #include "stm32h7xx_hal_hcd.h" +#endif /* HAL_HCD_MODULE_ENABLED */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr: If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ + #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ + void assert_failed(uint8_t *file, uint32_t line); +#else + #define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32H7xx_HAL_CONF_H */ + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/hw/bsp/stm32h743eval/STM32H743XIHx_FLASH.ld b/hw/bsp/stm32h743eval/STM32H743XIHx_FLASH.ld deleted file mode 100644 index 59b9ff4df..000000000 --- a/hw/bsp/stm32h743eval/STM32H743XIHx_FLASH.ld +++ /dev/null @@ -1,173 +0,0 @@ -/* -***************************************************************************** -** - -** File : LinkerScript.ld -** -** Abstract : Linker script for STM32H743XIHx Device with -** 2048KByte FLASH, 128KByte RAM -** -** Set heap size, stack size and stack location according -** to application requirements. -** -** Set memory bank area and size if external memory is used. -** -** Target : STMicroelectronics STM32 -** -** -** Distribution: The file is distributed as is, without any warranty -** of any kind. -** -** (c)Copyright Ac6. -** You may use this file as-is or modify it according to the needs of your -** project. Distribution of this file (unmodified or modified) is not -** permitted. Ac6 permit registered System Workbench for MCU users the -** rights to distribute the assembled, compiled & linked contents of this -** file as part of an application binary file, provided that it is built -** using the System Workbench for MCU toolchain. -** -***************************************************************************** -*/ - -/* Entry Point */ -ENTRY(Reset_Handler) - -/* Highest address of the user mode stack */ -_estack = 0x20020000; /* end of RAM */ -/* Generate a link error if heap and stack don't fit into RAM */ -_Min_Heap_Size = 0x200; /* required amount of heap */ -_Min_Stack_Size = 0x400; /* required amount of stack */ - -/* Specify the memory areas */ -MEMORY -{ -DTCMRAM (xrw) : ORIGIN = 0x20000000, LENGTH = 128K -RAM_D1 (xrw) : ORIGIN = 0x24000000, LENGTH = 512K -RAM_D2 (xrw) : ORIGIN = 0x30000000, LENGTH = 288K -RAM_D3 (xrw) : ORIGIN = 0x38000000, LENGTH = 64K -ITCMRAM (xrw) : ORIGIN = 0x00000000, LENGTH = 64K -FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 2048K -} - -/* Define output sections */ -SECTIONS -{ - /* The startup code goes first into FLASH */ - .isr_vector : - { - . = ALIGN(4); - KEEP(*(.isr_vector)) /* Startup code */ - . = ALIGN(4); - } >FLASH - - /* The program code and other data goes into FLASH */ - .text : - { - . = ALIGN(4); - *(.text) /* .text sections (code) */ - *(.text*) /* .text* sections (code) */ - *(.glue_7) /* glue arm to thumb code */ - *(.glue_7t) /* glue thumb to arm code */ - *(.eh_frame) - - KEEP (*(.init)) - KEEP (*(.fini)) - - . = ALIGN(4); - _etext = .; /* define a global symbols at end of code */ - } >FLASH - - /* Constant data goes into FLASH */ - .rodata : - { - . = ALIGN(4); - *(.rodata) /* .rodata sections (constants, strings, etc.) */ - *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ - . = ALIGN(4); - } >FLASH - - .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH - .ARM : { - __exidx_start = .; - *(.ARM.exidx*) - __exidx_end = .; - } >FLASH - - .preinit_array : - { - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP (*(.preinit_array*)) - PROVIDE_HIDDEN (__preinit_array_end = .); - } >FLASH - .init_array : - { - PROVIDE_HIDDEN (__init_array_start = .); - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array*)) - PROVIDE_HIDDEN (__init_array_end = .); - } >FLASH - .fini_array : - { - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP (*(SORT(.fini_array.*))) - KEEP (*(.fini_array*)) - PROVIDE_HIDDEN (__fini_array_end = .); - } >FLASH - - /* used by the startup to initialize data */ - _sidata = LOADADDR(.data); - - /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : - { - . = ALIGN(4); - _sdata = .; /* create a global symbol at data start */ - *(.data) /* .data sections */ - *(.data*) /* .data* sections */ - - . = ALIGN(4); - _edata = .; /* define a global symbol at data end */ - } >DTCMRAM AT> FLASH - - - /* Uninitialized data section */ - . = ALIGN(4); - .bss : - { - /* This is used by the startup in order to initialize the .bss secion */ - _sbss = .; /* define a global symbol at bss start */ - __bss_start__ = _sbss; - *(.bss) - *(.bss*) - *(COMMON) - - . = ALIGN(4); - _ebss = .; /* define a global symbol at bss end */ - __bss_end__ = _ebss; - } >DTCMRAM - - /* User_heap_stack section, used to check that there is enough RAM left */ - ._user_heap_stack : - { - . = ALIGN(8); - PROVIDE ( end = . ); - PROVIDE ( _end = . ); - . = . + _Min_Heap_Size; - . = . + _Min_Stack_Size; - . = ALIGN(8); - } >DTCMRAM - - - - /* Remove information from the standard libraries */ - /DISCARD/ : - { - libc.a ( * ) - libm.a ( * ) - libgcc.a ( * ) - } - - .ARM.attributes 0 : { *(.ARM.attributes) } -} - - diff --git a/hw/bsp/stm32h743eval/board.mk b/hw/bsp/stm32h743eval/board.mk deleted file mode 100644 index 7f42e1a88..000000000 --- a/hw/bsp/stm32h743eval/board.mk +++ /dev/null @@ -1,63 +0,0 @@ -# Default is Highspeed port -PORT ?= 1 - -CFLAGS += \ - -flto \ - -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m7 \ - -mfloat-abi=hard \ - -mfpu=fpv5-d16 \ - -nostdlib -nostartfiles \ - -DSTM32H743xx \ - -DCFG_TUSB_MCU=OPT_MCU_STM32H7 \ - -DBOARD_DEVICE_RHPORT_NUM=$(PORT) - -ifeq ($(PORT), 1) - CFLAGS += -DBOARD_DEVICE_RHPORT_SPEED=OPT_MODE_HIGH_SPEED - $(info "PORT1 High Speed") -else - $(info "PORT0 Full Speed") -endif - -# suppress warning caused by vendor mcu driver -CFLAGS += -Wno-error=maybe-uninitialized -Wno-error=cast-align - -ST_FAMILY = h7 -ST_CMSIS = hw/mcu/st/cmsis_device_$(ST_FAMILY) -ST_HAL_DRIVER = hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver - -# All source paths should be relative to the top level. -LD_FILE = hw/bsp/$(BOARD)/STM32H743XIHx_FLASH.ld - -SRC_C += \ - $(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_cortex.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc_ex.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_gpio.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_uart.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_pwr_ex.c - -SRC_S += \ - $(ST_CMSIS)/Source/Templates/gcc/startup_stm32h743xx.s - -INC += \ - $(TOP)/lib/CMSIS_5/CMSIS/Core/Include \ - $(TOP)/$(ST_CMSIS)/Include \ - $(TOP)/$(ST_HAL_DRIVER)/Inc \ - $(TOP)/hw/bsp/$(BOARD) - -# For TinyUSB port source -VENDOR = st -CHIP_FAMILY = synopsys - -# For freeRTOS port source -FREERTOS_PORT = ARM_CM7/r0p1 - -# For flash-jlink target -JLINK_DEVICE = stm32h743xi - -# flash target using on-board stlink -flash: flash-stlink diff --git a/hw/bsp/stm32h743eval/stm32h743eval.c b/hw/bsp/stm32h743eval/stm32h743eval.c deleted file mode 100644 index 6a51d8884..000000000 --- a/hw/bsp/stm32h743eval/stm32h743eval.c +++ /dev/null @@ -1,395 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 William D. Jones (thor0505@comcast.net), - * Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "../board.h" - -#include "stm32h7xx_hal.h" - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ - -// Despite being call USB2_OTG -// OTG_FS is marked as RHPort0 by TinyUSB to be consistent across stm32 port -void OTG_FS_IRQHandler(void) -{ - tud_int_handler(0); -} - -// Despite being call USB2_OTG -// OTG_HS is marked as RHPort1 by TinyUSB to be consistent across stm32 port -void OTG_HS_IRQHandler(void) -{ - tud_int_handler(1); -} - - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM -//--------------------------------------------------------------------+ - -#define LED_PORT GPIOA -#define LED_PIN GPIO_PIN_4 -#define LED_STATE_ON 1 - -// Tamper push-button -#define BUTTON_PORT GPIOC -#define BUTTON_PIN GPIO_PIN_13 -#define BUTTON_STATE_ACTIVE 0 - -// Need to change jumper setting J7 and J8 from RS-232 to STLink -#define UARTx USART1 -#define UART_GPIO_PORT GPIOB -#define UART_GPIO_AF GPIO_AF4_USART1 -#define UART_TX_PIN GPIO_PIN_14 -#define UART_RX_PIN GPIO_PIN_15 - -UART_HandleTypeDef UartHandle; - -// enable all LED, Button, Uart, USB clock -static void all_rcc_clk_enable(void) -{ - __HAL_RCC_GPIOA_CLK_ENABLE(); // LED - __HAL_RCC_GPIOC_CLK_ENABLE(); // Button - __HAL_RCC_GPIOB_CLK_ENABLE(); // Uart tx, rx - __HAL_RCC_USART1_CLK_ENABLE(); // Uart module -} - -/* PWR, RCC, GPIO (All): AHB4 (D3 domain) - USB{1,2} OTG_{H,F}S: AHB1 (D2 domain) -*/ - -/** - * @brief System Clock Configuration - * The system Clock is configured as follow : - * System Clock source = PLL (HSE) - * SYSCLK(Hz) = 400000000 (CPU Clock) - * HCLK(Hz) = 200000000 (AXI and AHBs Clock) - * AHB Prescaler = 2 - * D1 APB3 Prescaler = 2 (APB3 Clock 100MHz) - * D2 APB1 Prescaler = 2 (APB1 Clock 100MHz) - * D2 APB2 Prescaler = 2 (APB2 Clock 100MHz) - * D3 APB4 Prescaler = 2 (APB4 Clock 100MHz) - * HSE Frequency(Hz) = 25000000 - * PLL_M = 5 - * PLL_N = 160 - * PLL_P = 2 - * PLL_Q = 4 - * PLL_R = 2 - * PLL3_M = 25 - * PLL3_N = 336 - * PLL3_P = 2 - * PLL3_Q = 7 - * PLL3_R = 2 - * VDD(V) = 3.3 - * Flash Latency(WS) = 4 - * @param None - * @retval None - */ - -void SystemClock_Config(void) -{ - RCC_ClkInitTypeDef RCC_ClkInitStruct; - RCC_OscInitTypeDef RCC_OscInitStruct; - RCC_PeriphCLKInitTypeDef PeriphClkInitStruct; - - /*!< Supply configuration update enable */ - HAL_PWREx_ConfigSupply(PWR_LDO_SUPPLY); - - /* The voltage scaling allows optimizing the power consumption when the device is - clocked below the maximum system frequency, to update the voltage scaling value - regarding system frequency refer to product datasheet. */ - __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1); - - while ((PWR->D3CR & (PWR_D3CR_VOSRDY)) != PWR_D3CR_VOSRDY) {} - - /* Enable HSE Oscillator and activate PLL with HSE as source */ - RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; - RCC_OscInitStruct.HSEState = RCC_HSE_ON; - RCC_OscInitStruct.HSIState = RCC_HSI_OFF; - RCC_OscInitStruct.CSIState = RCC_CSI_OFF; - RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; - RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; - - /* PLL1 for System Clock */ - RCC_OscInitStruct.PLL.PLLM = 5; - RCC_OscInitStruct.PLL.PLLN = 160; - RCC_OscInitStruct.PLL.PLLFRACN = 0; - RCC_OscInitStruct.PLL.PLLP = 2; - RCC_OscInitStruct.PLL.PLLR = 2; - RCC_OscInitStruct.PLL.PLLQ = 4; - - RCC_OscInitStruct.PLL.PLLVCOSEL = RCC_PLL1VCOMEDIUM; - RCC_OscInitStruct.PLL.PLLRGE = RCC_PLL1VCIRANGE_2; - HAL_RCC_OscConfig(&RCC_OscInitStruct); - - /* PLL3 for USB Clock */ - PeriphClkInitStruct.PLL3.PLL3M = 25; - PeriphClkInitStruct.PLL3.PLL3N = 336; - PeriphClkInitStruct.PLL3.PLL3FRACN = 0; - PeriphClkInitStruct.PLL3.PLL3P = 2; - PeriphClkInitStruct.PLL3.PLL3R = 2; - PeriphClkInitStruct.PLL3.PLL3Q = 7; - - PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_USB; - PeriphClkInitStruct.UsbClockSelection = RCC_USBCLKSOURCE_PLL3; - HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct); - - /* Select PLL as system clock source and configure bus clocks dividers */ - RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_D1PCLK1 | RCC_CLOCKTYPE_PCLK1 | \ - RCC_CLOCKTYPE_PCLK2 | RCC_CLOCKTYPE_D3PCLK1); - - RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; - RCC_ClkInitStruct.SYSCLKDivider = RCC_SYSCLK_DIV1; - RCC_ClkInitStruct.AHBCLKDivider = RCC_HCLK_DIV2; - RCC_ClkInitStruct.APB1CLKDivider = RCC_APB1_DIV2; - RCC_ClkInitStruct.APB2CLKDivider = RCC_APB2_DIV2; - RCC_ClkInitStruct.APB3CLKDivider = RCC_APB3_DIV1; - HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_4); - - /*activate CSI clock mondatory for I/O Compensation Cell*/ - __HAL_RCC_CSI_ENABLE() ; - - /* Enable SYSCFG clock mondatory for I/O Compensation Cell */ - __HAL_RCC_SYSCFG_CLK_ENABLE() ; - - /* Enables the I/O Compensation Cell */ - HAL_EnableCompensationCell(); -} - -void board_init(void) -{ - SystemClock_Config(); - all_rcc_clk_enable(); - - // 1ms tick timer - SysTick_Config(SystemCoreClock / 1000); - -#if CFG_TUSB_OS == OPT_OS_FREERTOS - // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) - NVIC_SetPriority(OTG_FS_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); - NVIC_SetPriority(OTG_HS_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); -#endif - - GPIO_InitTypeDef GPIO_InitStruct; - - // LED - GPIO_InitStruct.Pin = LED_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; - GPIO_InitStruct.Pull = GPIO_PULLUP; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - HAL_GPIO_Init(LED_PORT, &GPIO_InitStruct); - - // Button - GPIO_InitStruct.Pin = BUTTON_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_INPUT; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - HAL_GPIO_Init(BUTTON_PORT, &GPIO_InitStruct); - - // Uart - GPIO_InitStruct.Pin = UART_TX_PIN | UART_RX_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Pull = GPIO_PULLUP; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; - GPIO_InitStruct.Alternate = UART_GPIO_AF; - HAL_GPIO_Init(UART_GPIO_PORT, &GPIO_InitStruct); - - UartHandle.Instance = UARTx; - UartHandle.Init.BaudRate = CFG_BOARD_UART_BAUDRATE; - UartHandle.Init.WordLength = UART_WORDLENGTH_8B; - UartHandle.Init.StopBits = UART_STOPBITS_1; - UartHandle.Init.Parity = UART_PARITY_NONE; - UartHandle.Init.HwFlowCtl = UART_HWCONTROL_NONE; - UartHandle.Init.Mode = UART_MODE_TX_RX; - UartHandle.Init.OverSampling = UART_OVERSAMPLING_16; - HAL_UART_Init(&UartHandle); - -#if BOARD_DEVICE_RHPORT_NUM == 0 - // Despite being call USB2_OTG - // OTG_FS is marked as RHPort0 by TinyUSB to be consistent across stm32 port - // PA9 VUSB, PA10 ID, PA11 DM, PA12 DP - - __HAL_RCC_GPIOA_CLK_ENABLE(); - - /* Configure DM DP Pins */ - GPIO_InitStruct.Pin = GPIO_PIN_11 | GPIO_PIN_12; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Alternate = GPIO_AF10_OTG2_HS; - HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); - - /* Configure VBUS Pin */ - GPIO_InitStruct.Pin = GPIO_PIN_9; - GPIO_InitStruct.Mode = GPIO_MODE_INPUT; - GPIO_InitStruct.Pull = GPIO_NOPULL; - HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); - - /* This for ID line debug */ - GPIO_InitStruct.Pin = GPIO_PIN_10; - GPIO_InitStruct.Mode = GPIO_MODE_AF_OD; - GPIO_InitStruct.Pull = GPIO_PULLUP; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - GPIO_InitStruct.Alternate = GPIO_AF10_OTG2_HS; - HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); - - // https://community.st.com/s/question/0D50X00009XkYZLSA3/stm32h7-nucleo-usb-fs-cdc - // TODO: Board init actually works fine without this line. - HAL_PWREx_EnableUSBVoltageDetector(); - __HAL_RCC_USB2_OTG_FS_CLK_ENABLE(); - - // Enable VBUS sense (B device) via pin PA9 - USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBDEN; - -#elif BOARD_DEVICE_RHPORT_NUM == 1 - - // Despite being call USB2_OTG - // OTG_HS is marked as RHPort1 by TinyUSB to be consistent across stm32 port - __GPIOA_CLK_ENABLE(); - __GPIOB_CLK_ENABLE(); - __GPIOC_CLK_ENABLE(); - __GPIOH_CLK_ENABLE(); - __GPIOI_CLK_ENABLE(); - - /* CLK */ - GPIO_InitStruct.Pin = GPIO_PIN_5; - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; - GPIO_InitStruct.Alternate = GPIO_AF10_OTG2_HS; - HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); - - /* D0 */ - GPIO_InitStruct.Pin = GPIO_PIN_3; - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; - GPIO_InitStruct.Alternate = GPIO_AF10_OTG2_HS; - HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); - - /* D1 D2 D3 D4 D5 D6 D7 */ - GPIO_InitStruct.Pin = GPIO_PIN_0 | GPIO_PIN_1 | GPIO_PIN_5 | GPIO_PIN_10 | GPIO_PIN_11 | GPIO_PIN_12 | GPIO_PIN_13; - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Alternate = GPIO_AF10_OTG2_HS; - HAL_GPIO_Init(GPIOB, &GPIO_InitStruct); - - /* STP */ - GPIO_InitStruct.Pin = GPIO_PIN_0; - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Alternate = GPIO_AF10_OTG2_HS; - HAL_GPIO_Init(GPIOC, &GPIO_InitStruct); - - /* NXT */ - GPIO_InitStruct.Pin = GPIO_PIN_4; - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Alternate = GPIO_AF10_OTG2_HS; - HAL_GPIO_Init(GPIOH, &GPIO_InitStruct); - - /* DIR */ - GPIO_InitStruct.Pin = GPIO_PIN_11; - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Alternate = GPIO_AF10_OTG2_HS; - HAL_GPIO_Init(GPIOI, &GPIO_InitStruct); - - // Enable ULPI clock - __HAL_RCC_USB1_OTG_HS_ULPI_CLK_ENABLE(); - - /* Enable USB HS Clocks */ - __HAL_RCC_USB1_OTG_HS_CLK_ENABLE(); - - // No VBUS sense - USB_OTG_HS->GCCFG &= ~USB_OTG_GCCFG_VBDEN; - - // B-peripheral session valid override enable - USB_OTG_HS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOEN; - USB_OTG_HS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOVAL; - - // Force device mode - USB_OTG_HS->GUSBCFG &= ~USB_OTG_GUSBCFG_FHMOD; - USB_OTG_HS->GUSBCFG |= USB_OTG_GUSBCFG_FDMOD; - - HAL_PWREx_EnableUSBVoltageDetector(); -#endif // rhport = 1 - -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - HAL_GPIO_WritePin(LED_PORT, LED_PIN, state); -} - -uint32_t board_button_read(void) -{ - return (BUTTON_STATE_ACTIVE == HAL_GPIO_ReadPin(BUTTON_PORT, BUTTON_PIN)) ? 1 : 0; -} - -int board_uart_read(uint8_t* buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -int board_uart_write(void const * buf, int len) -{ - HAL_UART_Transmit(&UartHandle, (uint8_t*) buf, len, 0xffff); - return len; -} - - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void SysTick_Handler (void) -{ - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif - -void HardFault_Handler (void) -{ - asm("bkpt"); -} - -// Required by __libc_init_array in startup code if we are compiling using -// -nostdlib/-nostartfiles. -void _init(void) -{ - -} diff --git a/hw/bsp/stm32h743eval/stm32h7xx_hal_conf.h b/hw/bsp/stm32h743eval/stm32h7xx_hal_conf.h deleted file mode 100644 index b9fa348ec..000000000 --- a/hw/bsp/stm32h743eval/stm32h7xx_hal_conf.h +++ /dev/null @@ -1,482 +0,0 @@ -/** - ****************************************************************************** - * @file stm32h7xx_hal_conf_template.h - * @brief HAL configuration template file. - * This file should be copied to the application folder and renamed - * to stm32h7xx_hal_conf.h. - ****************************************************************************** - * @attention - * - *

© COPYRIGHT(c) 2019 STMicroelectronics

- * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32H7xx_HAL_CONF_H -#define __STM32H7xx_HAL_CONF_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ - -/* ########################## Module Selection ############################## */ -/** - * @brief This is the list of modules to be used in the HAL driver - */ -#define HAL_MODULE_ENABLED -#define HAL_ADC_MODULE_ENABLED -/* #define HAL_CEC_MODULE_ENABLED */ -/* #define HAL_COMP_MODULE_ENABLED */ -#define HAL_CORTEX_MODULE_ENABLED -/* #define HAL_CRC_MODULE_ENABLED */ -/* #define HAL_CRYP_MODULE_ENABLED */ -/* #define HAL_DAC_MODULE_ENABLED */ -/* #define HAL_DCMI_MODULE_ENABLED */ -/* #define HAL_DFSDM_MODULE_ENABLED */ -#define HAL_DMA_MODULE_ENABLED -/* #define HAL_DMA2D_MODULE_ENABLED */ -/* #define HAL_ETH_MODULE_ENABLED */ -/* #define HAL_EXTI_MODULE_ENABLED */ -/* #define HAL_FDCAN_MODULE_ENABLED */ -#define HAL_FLASH_MODULE_ENABLED -#define HAL_GPIO_MODULE_ENABLED -/* #define HAL_HASH_MODULE_ENABLED */ -/* #define HAL_HCD_MODULE_ENABLED */ -/* #define HAL_HRTIM_MODULE_ENABLED */ -/* #define HAL_HSEM_MODULE_ENABLED */ -/* #define HAL_I2C_MODULE_ENABLED */ -/* #define HAL_I2S_MODULE_ENABLED */ -/* #define HAL_IRDA_MODULE_ENABLED */ -/* #define HAL_IWDG_MODULE_ENABLED */ -/* #define HAL_JPEG_MODULE_ENABLED */ -/* #define HAL_LPTIM_MODULE_ENABLED */ -/* #define HAL_LTDC_MODULE_ENABLED */ -/* #define HAL_MDIOS_MODULE_ENABLED */ -/* #define HAL_MDMA_MODULE_ENABLED */ -/* #define HAL_MMC_MODULE_ENABLED */ -/* #define HAL_NAND_MODULE_ENABLED */ -/* #define HAL_NOR_MODULE_ENABLED */ -/* #define HAL_OPAMP_MODULE_ENABLED */ -/* #define HAL_PCD_MODULE_ENABLED */ -#define HAL_PWR_MODULE_ENABLED -/* #define HAL_QSPI_MODULE_ENABLED */ -/* #define HAL_RAMECC_MODULE_ENABLED */ -#define HAL_RCC_MODULE_ENABLED -/* #define HAL_RNG_MODULE_ENABLED */ -/* #define HAL_RTC_MODULE_ENABLED */ -/* #define HAL_SAI_MODULE_ENABLED */ -/* #define HAL_SD_MODULE_ENABLED */ -/* #define HAL_SDRAM_MODULE_ENABLED */ -/* #define HAL_SMARTCARD_MODULE_ENABLED */ -/* #define HAL_SMBUS_MODULE_ENABLED */ -/* #define HAL_SPDIFRX_MODULE_ENABLED */ -#define HAL_SPI_MODULE_ENABLED -/* #define HAL_SRAM_MODULE_ENABLED */ -/* #define HAL_SWPMI_MODULE_ENABLED */ -/* #define HAL_TIM_MODULE_ENABLED */ -#define HAL_UART_MODULE_ENABLED -/* #define HAL_USART_MODULE_ENABLED */ -/* #define HAL_WWDG_MODULE_ENABLED */ - -/* ########################## Oscillator Values adaptation ####################*/ -/** - * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). - */ -#if !defined (HSE_VALUE) -#define HSE_VALUE ((uint32_t)25000000) /*!< Value of the External oscillator in Hz */ -#endif /* HSE_VALUE */ - -#if !defined (HSE_STARTUP_TIMEOUT) - #define HSE_STARTUP_TIMEOUT ((uint32_t)5000) /*!< Time out for HSE start up, in ms */ -#endif /* HSE_STARTUP_TIMEOUT */ - -/** - * @brief Internal oscillator (CSI) default value. - * This value is the default CSI value after Reset. - */ -#if !defined (CSI_VALUE) - #define CSI_VALUE ((uint32_t)4000000) /*!< Value of the Internal oscillator in Hz*/ -#endif /* CSI_VALUE */ - -/** - * @brief Internal High Speed oscillator (HSI) value. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). - */ -#if !defined (HSI_VALUE) - #define HSI_VALUE ((uint32_t)64000000) /*!< Value of the Internal oscillator in Hz*/ -#endif /* HSI_VALUE */ - -/** - * @brief External Low Speed oscillator (LSE) value. - * This value is used by the UART, RTC HAL module to compute the system frequency - */ -#if !defined (LSE_VALUE) - #define LSE_VALUE ((uint32_t)32768) /*!< Value of the External oscillator in Hz*/ -#endif /* LSE_VALUE */ - - -#if !defined (LSE_STARTUP_TIMEOUT) - #define LSE_STARTUP_TIMEOUT ((uint32_t)5000) /*!< Time out for LSE start up, in ms */ -#endif /* LSE_STARTUP_TIMEOUT */ - -#if !defined (LSI_VALUE) - #define LSI_VALUE ((uint32_t)32000) /*!< LSI Typical Value in Hz*/ -#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz - The real value may vary depending on the variations - in voltage and temperature.*/ - -/** - * @brief External clock source for I2S peripheral - * This value is used by the I2S HAL module to compute the I2S clock source - * frequency, this source is inserted directly through I2S_CKIN pad. - */ -#if !defined (EXTERNAL_CLOCK_VALUE) - #define EXTERNAL_CLOCK_VALUE 12288000U /*!< Value of the External clock in Hz*/ -#endif /* EXTERNAL_CLOCK_VALUE */ - -/* Tip: To avoid modifying this file each time you need to use different HSE, - === you can define the HSE value in your toolchain compiler preprocessor. */ - -/* ########################### System Configuration ######################### */ -/** - * @brief This is the HAL system configuration section - */ -#define VDD_VALUE ((uint32_t)3300) /*!< Value of VDD in mv */ -#define TICK_INT_PRIORITY ((uint32_t)0x0F) /*!< tick interrupt priority */ -#define USE_RTOS 0 -#define USE_SD_TRANSCEIVER 1U /*!< use uSD Transceiver */ -#define USE_SPI_CRC 1U /*!< use CRC in SPI */ - -#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ -#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ -#define USE_HAL_COMP_REGISTER_CALLBACKS 0U /* COMP register callback disabled */ -#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */ -#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ -#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */ -#define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */ -#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */ -#define USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */ -#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */ -#define USE_HAL_FDCAN_REGISTER_CALLBACKS 0U /* FDCAN register callback disabled */ -#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ -#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ -#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */ -#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ -#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */ -#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */ -#define USE_HAL_HRTIM_REGISTER_CALLBACKS 0U /* HRTIM register callback disabled */ -#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ -#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ -#define USE_HAL_JPEG_REGISTER_CALLBACKS 0U /* JPEG register callback disabled */ -#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */ -#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */ -#define USE_HAL_MDIOS_REGISTER_CALLBACKS 0U /* MDIO register callback disabled */ -#define USE_HAL_OPAMP_REGISTER_CALLBACKS 0U /* MDIO register callback disabled */ -#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ -#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */ -#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */ -#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ -#define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */ -#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */ -#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ -#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ -#define USE_HAL_SWPMI_REGISTER_CALLBACKS 0U /* SWPMI register callback disabled */ -#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ -#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ -#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ -#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ - -/* ########################### Ethernet Configuration ######################### */ -#define ETH_TX_DESC_CNT 4 /* number of Ethernet Tx DMA descriptors */ -#define ETH_RX_DESC_CNT 4 /* number of Ethernet Rx DMA descriptors */ - -#define ETH_MAC_ADDR0 ((uint8_t)0x02) -#define ETH_MAC_ADDR1 ((uint8_t)0x00) -#define ETH_MAC_ADDR2 ((uint8_t)0x00) -#define ETH_MAC_ADDR3 ((uint8_t)0x00) -#define ETH_MAC_ADDR4 ((uint8_t)0x00) -#define ETH_MAC_ADDR5 ((uint8_t)0x00) - -/* ########################## Assert Selection ############################## */ -/** - * @brief Uncomment the line below to expanse the "assert_param" macro in the - * HAL drivers code - */ -/* #define USE_FULL_ASSERT 1 */ - - -/* Includes ------------------------------------------------------------------*/ -/** - * @brief Include module's header file - */ - -#ifdef HAL_RCC_MODULE_ENABLED - #include "stm32h7xx_hal_rcc.h" -#endif /* HAL_RCC_MODULE_ENABLED */ - -#ifdef HAL_GPIO_MODULE_ENABLED - #include "stm32h7xx_hal_gpio.h" -#endif /* HAL_GPIO_MODULE_ENABLED */ - -#ifdef HAL_DMA_MODULE_ENABLED - #include "stm32h7xx_hal_dma.h" -#endif /* HAL_DMA_MODULE_ENABLED */ - -#ifdef HAL_MDMA_MODULE_ENABLED - #include "stm32h7xx_hal_mdma.h" -#endif /* HAL_MDMA_MODULE_ENABLED */ - -#ifdef HAL_HASH_MODULE_ENABLED - #include "stm32h7xx_hal_hash.h" -#endif /* HAL_HASH_MODULE_ENABLED */ - -#ifdef HAL_DCMI_MODULE_ENABLED - #include "stm32h7xx_hal_dcmi.h" -#endif /* HAL_DCMI_MODULE_ENABLED */ - -#ifdef HAL_DMA2D_MODULE_ENABLED - #include "stm32h7xx_hal_dma2d.h" -#endif /* HAL_DMA2D_MODULE_ENABLED */ - -#ifdef HAL_DSI_MODULE_ENABLED - #include "stm32h7xx_hal_dsi.h" -#endif /* HAL_DSI_MODULE_ENABLED */ - -#ifdef HAL_DFSDM_MODULE_ENABLED - #include "stm32h7xx_hal_dfsdm.h" -#endif /* HAL_DFSDM_MODULE_ENABLED */ - -#ifdef HAL_ETH_MODULE_ENABLED - #include "stm32h7xx_hal_eth.h" -#endif /* HAL_ETH_MODULE_ENABLED */ - -#ifdef HAL_EXTI_MODULE_ENABLED - #include "stm32h7xx_hal_exti.h" -#endif /* HAL_EXTI_MODULE_ENABLED */ - -#ifdef HAL_CORTEX_MODULE_ENABLED - #include "stm32h7xx_hal_cortex.h" -#endif /* HAL_CORTEX_MODULE_ENABLED */ - -#ifdef HAL_ADC_MODULE_ENABLED - #include "stm32h7xx_hal_adc.h" -#endif /* HAL_ADC_MODULE_ENABLED */ - -#ifdef HAL_FDCAN_MODULE_ENABLED - #include "stm32h7xx_hal_fdcan.h" -#endif /* HAL_FDCAN_MODULE_ENABLED */ - -#ifdef HAL_CEC_MODULE_ENABLED - #include "stm32h7xx_hal_cec.h" -#endif /* HAL_CEC_MODULE_ENABLED */ - -#ifdef HAL_COMP_MODULE_ENABLED - #include "stm32h7xx_hal_comp.h" -#endif /* HAL_COMP_MODULE_ENABLED */ - -#ifdef HAL_CRC_MODULE_ENABLED - #include "stm32h7xx_hal_crc.h" -#endif /* HAL_CRC_MODULE_ENABLED */ - -#ifdef HAL_CRYP_MODULE_ENABLED - #include "stm32h7xx_hal_cryp.h" -#endif /* HAL_CRYP_MODULE_ENABLED */ - -#ifdef HAL_DAC_MODULE_ENABLED - #include "stm32h7xx_hal_dac.h" -#endif /* HAL_DAC_MODULE_ENABLED */ - -#ifdef HAL_FLASH_MODULE_ENABLED - #include "stm32h7xx_hal_flash.h" -#endif /* HAL_FLASH_MODULE_ENABLED */ - -#ifdef HAL_HRTIM_MODULE_ENABLED - #include "stm32h7xx_hal_hrtim.h" -#endif /* HAL_HRTIM_MODULE_ENABLED */ - -#ifdef HAL_HSEM_MODULE_ENABLED - #include "stm32h7xx_hal_hsem.h" -#endif /* HAL_HSEM_MODULE_ENABLED */ - -#ifdef HAL_SRAM_MODULE_ENABLED - #include "stm32h7xx_hal_sram.h" -#endif /* HAL_SRAM_MODULE_ENABLED */ - -#ifdef HAL_NOR_MODULE_ENABLED - #include "stm32h7xx_hal_nor.h" -#endif /* HAL_NOR_MODULE_ENABLED */ - -#ifdef HAL_NAND_MODULE_ENABLED - #include "stm32h7xx_hal_nand.h" -#endif /* HAL_NAND_MODULE_ENABLED */ - -#ifdef HAL_I2C_MODULE_ENABLED - #include "stm32h7xx_hal_i2c.h" -#endif /* HAL_I2C_MODULE_ENABLED */ - -#ifdef HAL_I2S_MODULE_ENABLED - #include "stm32h7xx_hal_i2s.h" -#endif /* HAL_I2S_MODULE_ENABLED */ - -#ifdef HAL_IWDG_MODULE_ENABLED - #include "stm32h7xx_hal_iwdg.h" -#endif /* HAL_IWDG_MODULE_ENABLED */ - -#ifdef HAL_JPEG_MODULE_ENABLED - #include "stm32h7xx_hal_jpeg.h" -#endif /* HAL_JPEG_MODULE_ENABLED */ - -#ifdef HAL_MDIOS_MODULE_ENABLED - #include "stm32h7xx_hal_mdios.h" -#endif /* HAL_MDIOS_MODULE_ENABLED */ - -#ifdef HAL_MMC_MODULE_ENABLED - #include "stm32h7xx_hal_mmc.h" -#endif /* HAL_MMC_MODULE_ENABLED */ - -#ifdef HAL_LPTIM_MODULE_ENABLED -#include "stm32h7xx_hal_lptim.h" -#endif /* HAL_LPTIM_MODULE_ENABLED */ - -#ifdef HAL_LTDC_MODULE_ENABLED -#include "stm32h7xx_hal_ltdc.h" -#endif /* HAL_LTDC_MODULE_ENABLED */ - -#ifdef HAL_OPAMP_MODULE_ENABLED -#include "stm32h7xx_hal_opamp.h" -#endif /* HAL_OPAMP_MODULE_ENABLED */ - -#ifdef HAL_PWR_MODULE_ENABLED - #include "stm32h7xx_hal_pwr.h" -#endif /* HAL_PWR_MODULE_ENABLED */ - -#ifdef HAL_QSPI_MODULE_ENABLED - #include "stm32h7xx_hal_qspi.h" -#endif /* HAL_QSPI_MODULE_ENABLED */ - -#ifdef HAL_RAMECC_MODULE_ENABLED - #include "stm32h7xx_hal_ramecc.h" -#endif /* HAL_HCD_MODULE_ENABLED */ - -#ifdef HAL_RNG_MODULE_ENABLED - #include "stm32h7xx_hal_rng.h" -#endif /* HAL_RNG_MODULE_ENABLED */ - -#ifdef HAL_RTC_MODULE_ENABLED - #include "stm32h7xx_hal_rtc.h" -#endif /* HAL_RTC_MODULE_ENABLED */ - -#ifdef HAL_SAI_MODULE_ENABLED - #include "stm32h7xx_hal_sai.h" -#endif /* HAL_SAI_MODULE_ENABLED */ - -#ifdef HAL_SD_MODULE_ENABLED - #include "stm32h7xx_hal_sd.h" -#endif /* HAL_SD_MODULE_ENABLED */ - -#ifdef HAL_SDRAM_MODULE_ENABLED - #include "stm32h7xx_hal_sdram.h" -#endif /* HAL_SDRAM_MODULE_ENABLED */ - -#ifdef HAL_SPI_MODULE_ENABLED - #include "stm32h7xx_hal_spi.h" -#endif /* HAL_SPI_MODULE_ENABLED */ - -#ifdef HAL_SPDIFRX_MODULE_ENABLED - #include "stm32h7xx_hal_spdifrx.h" -#endif /* HAL_SPDIFRX_MODULE_ENABLED */ - -#ifdef HAL_SWPMI_MODULE_ENABLED - #include "stm32h7xx_hal_swpmi.h" -#endif /* HAL_SWPMI_MODULE_ENABLED */ - -#ifdef HAL_TIM_MODULE_ENABLED - #include "stm32h7xx_hal_tim.h" -#endif /* HAL_TIM_MODULE_ENABLED */ - -#ifdef HAL_UART_MODULE_ENABLED - #include "stm32h7xx_hal_uart.h" -#endif /* HAL_UART_MODULE_ENABLED */ - -#ifdef HAL_USART_MODULE_ENABLED - #include "stm32h7xx_hal_usart.h" -#endif /* HAL_USART_MODULE_ENABLED */ - -#ifdef HAL_IRDA_MODULE_ENABLED - #include "stm32h7xx_hal_irda.h" -#endif /* HAL_IRDA_MODULE_ENABLED */ - -#ifdef HAL_SMARTCARD_MODULE_ENABLED - #include "stm32h7xx_hal_smartcard.h" -#endif /* HAL_SMARTCARD_MODULE_ENABLED */ - -#ifdef HAL_SMBUS_MODULE_ENABLED - #include "stm32h7xx_hal_smbus.h" -#endif /* HAL_SMBUS_MODULE_ENABLED */ - -#ifdef HAL_WWDG_MODULE_ENABLED - #include "stm32h7xx_hal_wwdg.h" -#endif /* HAL_WWDG_MODULE_ENABLED */ - -#ifdef HAL_PCD_MODULE_ENABLED - #include "stm32h7xx_hal_pcd.h" -#endif /* HAL_PCD_MODULE_ENABLED */ - -#ifdef HAL_HCD_MODULE_ENABLED - #include "stm32h7xx_hal_hcd.h" -#endif /* HAL_HCD_MODULE_ENABLED */ - -/* Exported macro ------------------------------------------------------------*/ -#ifdef USE_FULL_ASSERT -/** - * @brief The assert_param macro is used for function's parameters check. - * @param expr: If expr is false, it calls assert_failed function - * which reports the name of the source file and the source - * line number of the call that failed. - * If expr is true, it returns no value. - * @retval None - */ - #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) -/* Exported functions ------------------------------------------------------- */ - void assert_failed(uint8_t *file, uint32_t line); -#else - #define assert_param(expr) ((void)0U) -#endif /* USE_FULL_ASSERT */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32H7xx_HAL_CONF_H */ - - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/hw/bsp/stm32h743nucleo/STM32H743ZITx_FLASH.ld b/hw/bsp/stm32h743nucleo/STM32H743ZITx_FLASH.ld deleted file mode 100644 index 65274992e..000000000 --- a/hw/bsp/stm32h743nucleo/STM32H743ZITx_FLASH.ld +++ /dev/null @@ -1,173 +0,0 @@ -/* -***************************************************************************** -** - -** File : LinkerScript.ld -** -** Abstract : Linker script for STM32H743ZITx Device with -** 2048KByte FLASH, 1056KByte RAM -** -** Set heap size, stack size and stack location according -** to application requirements. -** -** Set memory bank area and size if external memory is used. -** -** Target : STMicroelectronics STM32 -** -** -** Distribution: The file is distributed as is, without any warranty -** of any kind. -** -** (c)Copyright Ac6. -** You may use this file as-is or modify it according to the needs of your -** project. Distribution of this file (unmodified or modified) is not -** permitted. Ac6 permit registered System Workbench for MCU users the -** rights to distribute the assembled, compiled & linked contents of this -** file as part of an application binary file, provided that it is built -** using the System Workbench for MCU toolchain. -** -***************************************************************************** -*/ - -/* Entry Point */ -ENTRY(Reset_Handler) - -/* Highest address of the user mode stack */ -_estack = 0x20020000; /* end of RAM */ -/* Generate a link error if heap and stack don't fit into RAM */ -_Min_Heap_Size = 0x200; /* required amount of heap */ -_Min_Stack_Size = 0x400; /* required amount of stack */ - -/* Specify the memory areas */ -MEMORY -{ -DTCMRAM (xrw) : ORIGIN = 0x20000000, LENGTH = 128K -RAM_D1 (xrw) : ORIGIN = 0x24000000, LENGTH = 512K -RAM_D2 (xrw) : ORIGIN = 0x30000000, LENGTH = 288K -RAM_D3 (xrw) : ORIGIN = 0x38000000, LENGTH = 64K -ITCMRAM (xrw) : ORIGIN = 0x00000000, LENGTH = 64K -FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 2048K -} - -/* Define output sections */ -SECTIONS -{ - /* The startup code goes first into FLASH */ - .isr_vector : - { - . = ALIGN(4); - KEEP(*(.isr_vector)) /* Startup code */ - . = ALIGN(4); - } >FLASH - - /* The program code and other data goes into FLASH */ - .text : - { - . = ALIGN(4); - *(.text) /* .text sections (code) */ - *(.text*) /* .text* sections (code) */ - *(.glue_7) /* glue arm to thumb code */ - *(.glue_7t) /* glue thumb to arm code */ - *(.eh_frame) - - KEEP (*(.init)) - KEEP (*(.fini)) - - . = ALIGN(4); - _etext = .; /* define a global symbols at end of code */ - } >FLASH - - /* Constant data goes into FLASH */ - .rodata : - { - . = ALIGN(4); - *(.rodata) /* .rodata sections (constants, strings, etc.) */ - *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ - . = ALIGN(4); - } >FLASH - - .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH - .ARM : { - __exidx_start = .; - *(.ARM.exidx*) - __exidx_end = .; - } >FLASH - - .preinit_array : - { - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP (*(.preinit_array*)) - PROVIDE_HIDDEN (__preinit_array_end = .); - } >FLASH - .init_array : - { - PROVIDE_HIDDEN (__init_array_start = .); - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array*)) - PROVIDE_HIDDEN (__init_array_end = .); - } >FLASH - .fini_array : - { - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP (*(SORT(.fini_array.*))) - KEEP (*(.fini_array*)) - PROVIDE_HIDDEN (__fini_array_end = .); - } >FLASH - - /* used by the startup to initialize data */ - _sidata = LOADADDR(.data); - - /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : - { - . = ALIGN(4); - _sdata = .; /* create a global symbol at data start */ - *(.data) /* .data sections */ - *(.data*) /* .data* sections */ - - . = ALIGN(4); - _edata = .; /* define a global symbol at data end */ - } >DTCMRAM AT> FLASH - - - /* Uninitialized data section */ - . = ALIGN(4); - .bss : - { - /* This is used by the startup in order to initialize the .bss secion */ - _sbss = .; /* define a global symbol at bss start */ - __bss_start__ = _sbss; - *(.bss) - *(.bss*) - *(COMMON) - - . = ALIGN(4); - _ebss = .; /* define a global symbol at bss end */ - __bss_end__ = _ebss; - } >DTCMRAM - - /* User_heap_stack section, used to check that there is enough RAM left */ - ._user_heap_stack : - { - . = ALIGN(8); - PROVIDE ( end = . ); - PROVIDE ( _end = . ); - . = . + _Min_Heap_Size; - . = . + _Min_Stack_Size; - . = ALIGN(8); - } >DTCMRAM - - - - /* Remove information from the standard libraries */ - /DISCARD/ : - { - libc.a ( * ) - libm.a ( * ) - libgcc.a ( * ) - } - - .ARM.attributes 0 : { *(.ARM.attributes) } -} - - diff --git a/hw/bsp/stm32h743nucleo/board.mk b/hw/bsp/stm32h743nucleo/board.mk deleted file mode 100644 index 2a5ed8fc2..000000000 --- a/hw/bsp/stm32h743nucleo/board.mk +++ /dev/null @@ -1,49 +0,0 @@ -CFLAGS += \ - -flto \ - -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m7 \ - -mfloat-abi=hard \ - -mfpu=fpv5-d16 \ - -nostdlib -nostartfiles \ - -DSTM32H743xx \ - -DCFG_TUSB_MCU=OPT_MCU_STM32H7 - -# suppress warning caused by vendor mcu driver -CFLAGS += -Wno-error=maybe-uninitialized -Wno-error=cast-align - -ST_FAMILY = h7 -ST_CMSIS = hw/mcu/st/cmsis_device_$(ST_FAMILY) -ST_HAL_DRIVER = hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver - -# All source paths should be relative to the top level. -LD_FILE = hw/bsp/$(BOARD)/STM32H743ZITx_FLASH.ld - -SRC_C += \ - $(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_cortex.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc_ex.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_gpio.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_uart.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_pwr_ex.c - -SRC_S += \ - $(ST_CMSIS)/Source/Templates/gcc/startup_stm32h743xx.s - -INC += \ - $(TOP)/lib/CMSIS_5/CMSIS/Core/Include \ - $(TOP)/$(ST_CMSIS)/Include \ - $(TOP)/$(ST_HAL_DRIVER)/Inc \ - $(TOP)/hw/bsp/$(BOARD) - -# For TinyUSB port source -VENDOR = st -CHIP_FAMILY = synopsys - -# For freeRTOS port source -FREERTOS_PORT = ARM_CM7/r0p1 - -# flash target using on-board stlink -flash: flash-stlink diff --git a/hw/bsp/stm32h743nucleo/stm32h743nucleo.c b/hw/bsp/stm32h743nucleo/stm32h743nucleo.c deleted file mode 100644 index b4a723871..000000000 --- a/hw/bsp/stm32h743nucleo/stm32h743nucleo.c +++ /dev/null @@ -1,283 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 William D. Jones (thor0505@comcast.net), - * Ha Thach (tinyusb.org) - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "../board.h" - -#include "stm32h7xx_hal.h" - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ -void OTG_FS_IRQHandler(void) -{ - tud_int_handler(0); -} - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM -//--------------------------------------------------------------------+ - -#define LED_PORT GPIOB -#define LED_PIN GPIO_PIN_0 -#define LED_STATE_ON 1 - -#define BUTTON_PORT GPIOC -#define BUTTON_PIN GPIO_PIN_13 -#define BUTTON_STATE_ACTIVE 1 - -#define UARTx USART3 -#define UART_GPIO_PORT GPIOD -#define UART_GPIO_AF GPIO_AF7_USART3 -#define UART_TX_PIN GPIO_PIN_8 -#define UART_RX_PIN GPIO_PIN_9 - -UART_HandleTypeDef UartHandle; - -// enable all LED, Button, Uart, USB clock -static void all_rcc_clk_enable(void) -{ - __HAL_RCC_GPIOA_CLK_ENABLE(); // USB D+, D- - __HAL_RCC_GPIOB_CLK_ENABLE(); // LED - __HAL_RCC_GPIOC_CLK_ENABLE(); // Button - __HAL_RCC_GPIOD_CLK_ENABLE(); // Uart tx, rx - __HAL_RCC_USART3_CLK_ENABLE(); // Uart module -} - -/* PWR, RCC, GPIO (All): AHB4 (D3 domain) - USB{1,2} OTG_{H,F}S: AHB1 (D2 domain) -*/ - -/** - * @brief System Clock Configuration - * The system Clock is configured as follows : - * System Clock source = PLL (HSE) - * SYSCLK(Hz) = 168000000 - * ACLK(Hz) = 168000000 - * HCLK(Hz) = 168000000 - * AHB1-4 Prescaler = 1 - * APB1 Prescaler (Domain 2) = 2 - * APB2 Prescaler (Domain 2) = 2 - * APB3 Prescaler (Domain 1) = 2 - * APB4 Prescaler (Domain 3) = 2 - * HSE Frequency(Hz) = 8000000 - * PLL1_M = 8 - * PLL1_N = 336 - * PLL1_P = 2 - * PLL1_Q = 7 - * PLL1_R = Unused (TODO: figure out how - * to gate from HAL?) - * VDD(V) = 3.3 - * Main regulator output voltage = Scale3 mode - * Flash Latency(WS) = 4 - * @param None - * @retval None - */ -static void SystemClock_Config(void) -{ - RCC_ClkInitTypeDef RCC_ClkInitStruct; - RCC_OscInitTypeDef RCC_OscInitStruct; - - /* The PWR block is always enabled on the H7 series- there is no clock - enable. For now, use the default VOS3 scale mode (lowest) and limit clock - frequencies to avoid potential current draw problems from bus - power when using the max clock speeds throughout the chip. */ - - /* Enable HSE Oscillator and activate PLL1 with HSE as source */ - RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; - RCC_OscInitStruct.HSEState = RCC_HSE_ON; - RCC_OscInitStruct.HSIState = RCC_HSI_OFF; - RCC_OscInitStruct.CSIState = RCC_CSI_OFF; - RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; - RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; - RCC_OscInitStruct.PLL.PLLM = HSE_VALUE/1000000; - RCC_OscInitStruct.PLL.PLLN = 336; - RCC_OscInitStruct.PLL.PLLP = 2; - RCC_OscInitStruct.PLL.PLLQ = 7; - RCC_OscInitStruct.PLL.PLLR = 2; /* Unused */ - RCC_OscInitStruct.PLL.PLLRGE = RCC_PLL1VCIRANGE_0; - RCC_OscInitStruct.PLL.PLLVCOSEL = RCC_PLL1VCOMEDIUM; - RCC_OscInitStruct.PLL.PLLFRACN = 0; - HAL_RCC_OscConfig(&RCC_OscInitStruct); - - RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | \ - RCC_CLOCKTYPE_D1PCLK1 | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2 | \ - RCC_CLOCKTYPE_D3PCLK1); - RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; - RCC_ClkInitStruct.SYSCLKDivider = RCC_SYSCLK_DIV1; - RCC_ClkInitStruct.AHBCLKDivider = RCC_HCLK_DIV1; - - /* Unlike on the STM32F4 family, it appears the maximum APB frequencies are - device-dependent- 120 MHz for this board according to Figure 2 of - the datasheet. Dividing by half will be safe for now. */ - RCC_ClkInitStruct.APB3CLKDivider = RCC_APB3_DIV2; - RCC_ClkInitStruct.APB1CLKDivider = RCC_APB1_DIV2; - RCC_ClkInitStruct.APB2CLKDivider = RCC_APB2_DIV2; - RCC_ClkInitStruct.APB4CLKDivider = RCC_APB4_DIV2; - - /* 4 wait states required for 168MHz and VOS3. */ - HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_4); - - /* Like on F4, on H7, USB's actual peripheral clock and bus clock are - separate. However, the main system PLL (PLL1) doesn't have a direct - connection to the USB peripheral clock to generate 48 MHz, so we do this - dance. This will connect PLL1's Q output to the USB peripheral clock. */ - RCC_PeriphCLKInitTypeDef RCC_PeriphCLKInitStruct; - - RCC_PeriphCLKInitStruct.PeriphClockSelection = RCC_PERIPHCLK_USB; - RCC_PeriphCLKInitStruct.UsbClockSelection = RCC_USBCLKSOURCE_PLL; - HAL_RCCEx_PeriphCLKConfig(&RCC_PeriphCLKInitStruct); -} - -void board_init(void) -{ - SystemClock_Config(); - all_rcc_clk_enable(); - - #if CFG_TUSB_OS == OPT_OS_NONE - // 1ms tick timer - SysTick_Config(SystemCoreClock / 1000); - #endif - - GPIO_InitTypeDef GPIO_InitStruct; - - // LED - GPIO_InitStruct.Pin = LED_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; - GPIO_InitStruct.Pull = GPIO_PULLUP; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - HAL_GPIO_Init(LED_PORT, &GPIO_InitStruct); - - // Button - GPIO_InitStruct.Pin = BUTTON_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_INPUT; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - HAL_GPIO_Init(BUTTON_PORT, &GPIO_InitStruct); - - // Uart - GPIO_InitStruct.Pin = UART_TX_PIN | UART_RX_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Pull = GPIO_PULLUP; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; - GPIO_InitStruct.Alternate = UART_GPIO_AF; - HAL_GPIO_Init(UART_GPIO_PORT, &GPIO_InitStruct); - - UartHandle.Instance = UARTx; - UartHandle.Init.BaudRate = CFG_BOARD_UART_BAUDRATE; - UartHandle.Init.WordLength = UART_WORDLENGTH_8B; - UartHandle.Init.StopBits = UART_STOPBITS_1; - UartHandle.Init.Parity = UART_PARITY_NONE; - UartHandle.Init.HwFlowCtl = UART_HWCONTROL_NONE; - UartHandle.Init.Mode = UART_MODE_TX_RX; - UartHandle.Init.OverSampling = UART_OVERSAMPLING_16; - HAL_UART_Init(&UartHandle); - - // USB Pin Init - // PA9- VUSB, PA10- ID, PA11- DM, PA12- DP - - /* Configure DM DP Pins */ - GPIO_InitStruct.Pin = GPIO_PIN_11 | GPIO_PIN_12; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Alternate = GPIO_AF10_OTG2_HS; - HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); - - /* Configure VBUS Pin */ - GPIO_InitStruct.Pin = GPIO_PIN_9; - GPIO_InitStruct.Mode = GPIO_MODE_INPUT; - GPIO_InitStruct.Pull = GPIO_NOPULL; - HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); - - /* This for ID line debug */ - GPIO_InitStruct.Pin = GPIO_PIN_10; - GPIO_InitStruct.Mode = GPIO_MODE_AF_OD; - GPIO_InitStruct.Pull = GPIO_PULLUP; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - GPIO_InitStruct.Alternate = GPIO_AF10_OTG2_HS; - HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); - - // https://community.st.com/s/question/0D50X00009XkYZLSA3/stm32h7-nucleo-usb-fs-cdc - // TODO: Board init actually works fine without this line. - HAL_PWREx_EnableUSBVoltageDetector(); - __HAL_RCC_USB2_OTG_FS_CLK_ENABLE(); - - // Enable VBUS sense (B device) via pin PA9 - USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBDEN; -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - HAL_GPIO_WritePin(LED_PORT, LED_PIN, state); -} - -uint32_t board_button_read(void) -{ - return HAL_GPIO_ReadPin(BUTTON_PORT, BUTTON_PIN); -} - -int board_uart_read(uint8_t* buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -int board_uart_write(void const * buf, int len) -{ - HAL_UART_Transmit(&UartHandle, (uint8_t*) buf, len, 0xffff); - return len; -} - - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void SysTick_Handler (void) -{ - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif - -void HardFault_Handler (void) -{ - asm("bkpt"); -} - -// Required by __libc_init_array in startup code if we are compiling using -// -nostdlib/-nostartfiles. -void _init(void) -{ - -} diff --git a/hw/bsp/stm32h743nucleo/stm32h7xx_hal_conf.h b/hw/bsp/stm32h743nucleo/stm32h7xx_hal_conf.h deleted file mode 100644 index 8548ca246..000000000 --- a/hw/bsp/stm32h743nucleo/stm32h7xx_hal_conf.h +++ /dev/null @@ -1,481 +0,0 @@ -/** - ****************************************************************************** - * @file stm32h7xx_hal_conf_template.h - * @brief HAL configuration template file. - * This file should be copied to the application folder and renamed - * to stm32h7xx_hal_conf.h. - ****************************************************************************** - * @attention - * - *

© COPYRIGHT(c) 2019 STMicroelectronics

- * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32H7xx_HAL_CONF_H -#define __STM32H7xx_HAL_CONF_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ - -/* ########################## Module Selection ############################## */ -/** - * @brief This is the list of modules to be used in the HAL driver - */ -#define HAL_MODULE_ENABLED -#define HAL_ADC_MODULE_ENABLED -/* #define HAL_CEC_MODULE_ENABLED */ -/* #define HAL_COMP_MODULE_ENABLED */ -#define HAL_CORTEX_MODULE_ENABLED -/* #define HAL_CRC_MODULE_ENABLED */ -/* #define HAL_CRYP_MODULE_ENABLED */ -/* #define HAL_DAC_MODULE_ENABLED */ -/* #define HAL_DCMI_MODULE_ENABLED */ -/* #define HAL_DFSDM_MODULE_ENABLED */ -#define HAL_DMA_MODULE_ENABLED -/* #define HAL_DMA2D_MODULE_ENABLED */ -/* #define HAL_ETH_MODULE_ENABLED */ -/* #define HAL_EXTI_MODULE_ENABLED */ -/* #define HAL_FDCAN_MODULE_ENABLED */ -#define HAL_FLASH_MODULE_ENABLED -#define HAL_GPIO_MODULE_ENABLED -/* #define HAL_HASH_MODULE_ENABLED */ -/* #define HAL_HCD_MODULE_ENABLED */ -/* #define HAL_HRTIM_MODULE_ENABLED */ -/* #define HAL_HSEM_MODULE_ENABLED */ -/* #define HAL_I2C_MODULE_ENABLED */ -/* #define HAL_I2S_MODULE_ENABLED */ -/* #define HAL_IRDA_MODULE_ENABLED */ -/* #define HAL_IWDG_MODULE_ENABLED */ -/* #define HAL_JPEG_MODULE_ENABLED */ -/* #define HAL_LPTIM_MODULE_ENABLED */ -/* #define HAL_LTDC_MODULE_ENABLED */ -/* #define HAL_MDIOS_MODULE_ENABLED */ -/* #define HAL_MDMA_MODULE_ENABLED */ -/* #define HAL_MMC_MODULE_ENABLED */ -/* #define HAL_NAND_MODULE_ENABLED */ -/* #define HAL_NOR_MODULE_ENABLED */ -/* #define HAL_OPAMP_MODULE_ENABLED */ -/* #define HAL_PCD_MODULE_ENABLED */ -#define HAL_PWR_MODULE_ENABLED -/* #define HAL_QSPI_MODULE_ENABLED */ -/* #define HAL_RAMECC_MODULE_ENABLED */ -#define HAL_RCC_MODULE_ENABLED -/* #define HAL_RNG_MODULE_ENABLED */ -/* #define HAL_RTC_MODULE_ENABLED */ -/* #define HAL_SAI_MODULE_ENABLED */ -/* #define HAL_SD_MODULE_ENABLED */ -/* #define HAL_SDRAM_MODULE_ENABLED */ -/* #define HAL_SMARTCARD_MODULE_ENABLED */ -/* #define HAL_SMBUS_MODULE_ENABLED */ -/* #define HAL_SPDIFRX_MODULE_ENABLED */ -#define HAL_SPI_MODULE_ENABLED -/* #define HAL_SRAM_MODULE_ENABLED */ -/* #define HAL_SWPMI_MODULE_ENABLED */ -/* #define HAL_TIM_MODULE_ENABLED */ -#define HAL_UART_MODULE_ENABLED */ -/* #define HAL_USART_MODULE_ENABLED */ -/* #define HAL_WWDG_MODULE_ENABLED */ - -/* ########################## Oscillator Values adaptation ####################*/ -/** - * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). - */ -#if !defined (HSE_VALUE) -#define HSE_VALUE ((uint32_t)8000000) /*!< Value of the External oscillator in Hz */ -#endif /* HSE_VALUE */ - -#if !defined (HSE_STARTUP_TIMEOUT) - #define HSE_STARTUP_TIMEOUT ((uint32_t)5000) /*!< Time out for HSE start up, in ms */ -#endif /* HSE_STARTUP_TIMEOUT */ - -/** - * @brief Internal oscillator (CSI) default value. - * This value is the default CSI value after Reset. - */ -#if !defined (CSI_VALUE) - #define CSI_VALUE ((uint32_t)4000000) /*!< Value of the Internal oscillator in Hz*/ -#endif /* CSI_VALUE */ - -/** - * @brief Internal High Speed oscillator (HSI) value. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). - */ -#if !defined (HSI_VALUE) - #define HSI_VALUE ((uint32_t)64000000) /*!< Value of the Internal oscillator in Hz*/ -#endif /* HSI_VALUE */ - -/** - * @brief External Low Speed oscillator (LSE) value. - * This value is used by the UART, RTC HAL module to compute the system frequency - */ -#if !defined (LSE_VALUE) - #define LSE_VALUE ((uint32_t)32768) /*!< Value of the External oscillator in Hz*/ -#endif /* LSE_VALUE */ - - -#if !defined (LSE_STARTUP_TIMEOUT) - #define LSE_STARTUP_TIMEOUT ((uint32_t)5000) /*!< Time out for LSE start up, in ms */ -#endif /* LSE_STARTUP_TIMEOUT */ - -#if !defined (LSI_VALUE) - #define LSI_VALUE ((uint32_t)32000) /*!< LSI Typical Value in Hz*/ -#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz - The real value may vary depending on the variations - in voltage and temperature.*/ - -/** - * @brief External clock source for I2S peripheral - * This value is used by the I2S HAL module to compute the I2S clock source - * frequency, this source is inserted directly through I2S_CKIN pad. - */ -#if !defined (EXTERNAL_CLOCK_VALUE) - #define EXTERNAL_CLOCK_VALUE 12288000U /*!< Value of the External clock in Hz*/ -#endif /* EXTERNAL_CLOCK_VALUE */ - -/* Tip: To avoid modifying this file each time you need to use different HSE, - === you can define the HSE value in your toolchain compiler preprocessor. */ - -/* ########################### System Configuration ######################### */ -/** - * @brief This is the HAL system configuration section - */ -#define VDD_VALUE ((uint32_t)3300) /*!< Value of VDD in mv */ -#define TICK_INT_PRIORITY ((uint32_t)0x0F) /*!< tick interrupt priority */ -#define USE_RTOS 0 -#define USE_SD_TRANSCEIVER 1U /*!< use uSD Transceiver */ -#define USE_SPI_CRC 1U /*!< use CRC in SPI */ - -#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ -#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ -#define USE_HAL_COMP_REGISTER_CALLBACKS 0U /* COMP register callback disabled */ -#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */ -#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ -#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */ -#define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */ -#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */ -#define USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */ -#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */ -#define USE_HAL_FDCAN_REGISTER_CALLBACKS 0U /* FDCAN register callback disabled */ -#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ -#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ -#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */ -#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ -#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */ -#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */ -#define USE_HAL_HRTIM_REGISTER_CALLBACKS 0U /* HRTIM register callback disabled */ -#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ -#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ -#define USE_HAL_JPEG_REGISTER_CALLBACKS 0U /* JPEG register callback disabled */ -#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */ -#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */ -#define USE_HAL_MDIOS_REGISTER_CALLBACKS 0U /* MDIO register callback disabled */ -#define USE_HAL_OPAMP_REGISTER_CALLBACKS 0U /* MDIO register callback disabled */ -#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ -#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */ -#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */ -#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ -#define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */ -#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */ -#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ -#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ -#define USE_HAL_SWPMI_REGISTER_CALLBACKS 0U /* SWPMI register callback disabled */ -#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ -#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ -#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ - -/* ########################### Ethernet Configuration ######################### */ -#define ETH_TX_DESC_CNT 4 /* number of Ethernet Tx DMA descriptors */ -#define ETH_RX_DESC_CNT 4 /* number of Ethernet Rx DMA descriptors */ - -#define ETH_MAC_ADDR0 ((uint8_t)0x02) -#define ETH_MAC_ADDR1 ((uint8_t)0x00) -#define ETH_MAC_ADDR2 ((uint8_t)0x00) -#define ETH_MAC_ADDR3 ((uint8_t)0x00) -#define ETH_MAC_ADDR4 ((uint8_t)0x00) -#define ETH_MAC_ADDR5 ((uint8_t)0x00) - -/* ########################## Assert Selection ############################## */ -/** - * @brief Uncomment the line below to expanse the "assert_param" macro in the - * HAL drivers code - */ -/* #define USE_FULL_ASSERT 1 */ - - -/* Includes ------------------------------------------------------------------*/ -/** - * @brief Include module's header file - */ - -#ifdef HAL_RCC_MODULE_ENABLED - #include "stm32h7xx_hal_rcc.h" -#endif /* HAL_RCC_MODULE_ENABLED */ - -#ifdef HAL_GPIO_MODULE_ENABLED - #include "stm32h7xx_hal_gpio.h" -#endif /* HAL_GPIO_MODULE_ENABLED */ - -#ifdef HAL_DMA_MODULE_ENABLED - #include "stm32h7xx_hal_dma.h" -#endif /* HAL_DMA_MODULE_ENABLED */ - -#ifdef HAL_MDMA_MODULE_ENABLED - #include "stm32h7xx_hal_mdma.h" -#endif /* HAL_MDMA_MODULE_ENABLED */ - -#ifdef HAL_HASH_MODULE_ENABLED - #include "stm32h7xx_hal_hash.h" -#endif /* HAL_HASH_MODULE_ENABLED */ - -#ifdef HAL_DCMI_MODULE_ENABLED - #include "stm32h7xx_hal_dcmi.h" -#endif /* HAL_DCMI_MODULE_ENABLED */ - -#ifdef HAL_DMA2D_MODULE_ENABLED - #include "stm32h7xx_hal_dma2d.h" -#endif /* HAL_DMA2D_MODULE_ENABLED */ - -#ifdef HAL_DSI_MODULE_ENABLED - #include "stm32h7xx_hal_dsi.h" -#endif /* HAL_DSI_MODULE_ENABLED */ - -#ifdef HAL_DFSDM_MODULE_ENABLED - #include "stm32h7xx_hal_dfsdm.h" -#endif /* HAL_DFSDM_MODULE_ENABLED */ - -#ifdef HAL_ETH_MODULE_ENABLED - #include "stm32h7xx_hal_eth.h" -#endif /* HAL_ETH_MODULE_ENABLED */ - -#ifdef HAL_EXTI_MODULE_ENABLED - #include "stm32h7xx_hal_exti.h" -#endif /* HAL_EXTI_MODULE_ENABLED */ - -#ifdef HAL_CORTEX_MODULE_ENABLED - #include "stm32h7xx_hal_cortex.h" -#endif /* HAL_CORTEX_MODULE_ENABLED */ - -#ifdef HAL_ADC_MODULE_ENABLED - #include "stm32h7xx_hal_adc.h" -#endif /* HAL_ADC_MODULE_ENABLED */ - -#ifdef HAL_FDCAN_MODULE_ENABLED - #include "stm32h7xx_hal_fdcan.h" -#endif /* HAL_FDCAN_MODULE_ENABLED */ - -#ifdef HAL_CEC_MODULE_ENABLED - #include "stm32h7xx_hal_cec.h" -#endif /* HAL_CEC_MODULE_ENABLED */ - -#ifdef HAL_COMP_MODULE_ENABLED - #include "stm32h7xx_hal_comp.h" -#endif /* HAL_COMP_MODULE_ENABLED */ - -#ifdef HAL_CRC_MODULE_ENABLED - #include "stm32h7xx_hal_crc.h" -#endif /* HAL_CRC_MODULE_ENABLED */ - -#ifdef HAL_CRYP_MODULE_ENABLED - #include "stm32h7xx_hal_cryp.h" -#endif /* HAL_CRYP_MODULE_ENABLED */ - -#ifdef HAL_DAC_MODULE_ENABLED - #include "stm32h7xx_hal_dac.h" -#endif /* HAL_DAC_MODULE_ENABLED */ - -#ifdef HAL_FLASH_MODULE_ENABLED - #include "stm32h7xx_hal_flash.h" -#endif /* HAL_FLASH_MODULE_ENABLED */ - -#ifdef HAL_HRTIM_MODULE_ENABLED - #include "stm32h7xx_hal_hrtim.h" -#endif /* HAL_HRTIM_MODULE_ENABLED */ - -#ifdef HAL_HSEM_MODULE_ENABLED - #include "stm32h7xx_hal_hsem.h" -#endif /* HAL_HSEM_MODULE_ENABLED */ - -#ifdef HAL_SRAM_MODULE_ENABLED - #include "stm32h7xx_hal_sram.h" -#endif /* HAL_SRAM_MODULE_ENABLED */ - -#ifdef HAL_NOR_MODULE_ENABLED - #include "stm32h7xx_hal_nor.h" -#endif /* HAL_NOR_MODULE_ENABLED */ - -#ifdef HAL_NAND_MODULE_ENABLED - #include "stm32h7xx_hal_nand.h" -#endif /* HAL_NAND_MODULE_ENABLED */ - -#ifdef HAL_I2C_MODULE_ENABLED - #include "stm32h7xx_hal_i2c.h" -#endif /* HAL_I2C_MODULE_ENABLED */ - -#ifdef HAL_I2S_MODULE_ENABLED - #include "stm32h7xx_hal_i2s.h" -#endif /* HAL_I2S_MODULE_ENABLED */ - -#ifdef HAL_IWDG_MODULE_ENABLED - #include "stm32h7xx_hal_iwdg.h" -#endif /* HAL_IWDG_MODULE_ENABLED */ - -#ifdef HAL_JPEG_MODULE_ENABLED - #include "stm32h7xx_hal_jpeg.h" -#endif /* HAL_JPEG_MODULE_ENABLED */ - -#ifdef HAL_MDIOS_MODULE_ENABLED - #include "stm32h7xx_hal_mdios.h" -#endif /* HAL_MDIOS_MODULE_ENABLED */ - -#ifdef HAL_MMC_MODULE_ENABLED - #include "stm32h7xx_hal_mmc.h" -#endif /* HAL_MMC_MODULE_ENABLED */ - -#ifdef HAL_LPTIM_MODULE_ENABLED -#include "stm32h7xx_hal_lptim.h" -#endif /* HAL_LPTIM_MODULE_ENABLED */ - -#ifdef HAL_LTDC_MODULE_ENABLED -#include "stm32h7xx_hal_ltdc.h" -#endif /* HAL_LTDC_MODULE_ENABLED */ - -#ifdef HAL_OPAMP_MODULE_ENABLED -#include "stm32h7xx_hal_opamp.h" -#endif /* HAL_OPAMP_MODULE_ENABLED */ - -#ifdef HAL_PWR_MODULE_ENABLED - #include "stm32h7xx_hal_pwr.h" -#endif /* HAL_PWR_MODULE_ENABLED */ - -#ifdef HAL_QSPI_MODULE_ENABLED - #include "stm32h7xx_hal_qspi.h" -#endif /* HAL_QSPI_MODULE_ENABLED */ - -#ifdef HAL_RAMECC_MODULE_ENABLED - #include "stm32h7xx_hal_ramecc.h" -#endif /* HAL_HCD_MODULE_ENABLED */ - -#ifdef HAL_RNG_MODULE_ENABLED - #include "stm32h7xx_hal_rng.h" -#endif /* HAL_RNG_MODULE_ENABLED */ - -#ifdef HAL_RTC_MODULE_ENABLED - #include "stm32h7xx_hal_rtc.h" -#endif /* HAL_RTC_MODULE_ENABLED */ - -#ifdef HAL_SAI_MODULE_ENABLED - #include "stm32h7xx_hal_sai.h" -#endif /* HAL_SAI_MODULE_ENABLED */ - -#ifdef HAL_SD_MODULE_ENABLED - #include "stm32h7xx_hal_sd.h" -#endif /* HAL_SD_MODULE_ENABLED */ - -#ifdef HAL_SDRAM_MODULE_ENABLED - #include "stm32h7xx_hal_sdram.h" -#endif /* HAL_SDRAM_MODULE_ENABLED */ - -#ifdef HAL_SPI_MODULE_ENABLED - #include "stm32h7xx_hal_spi.h" -#endif /* HAL_SPI_MODULE_ENABLED */ - -#ifdef HAL_SPDIFRX_MODULE_ENABLED - #include "stm32h7xx_hal_spdifrx.h" -#endif /* HAL_SPDIFRX_MODULE_ENABLED */ - -#ifdef HAL_SWPMI_MODULE_ENABLED - #include "stm32h7xx_hal_swpmi.h" -#endif /* HAL_SWPMI_MODULE_ENABLED */ - -#ifdef HAL_TIM_MODULE_ENABLED - #include "stm32h7xx_hal_tim.h" -#endif /* HAL_TIM_MODULE_ENABLED */ - -#ifdef HAL_UART_MODULE_ENABLED - #include "stm32h7xx_hal_uart.h" -#endif /* HAL_UART_MODULE_ENABLED */ - -#ifdef HAL_USART_MODULE_ENABLED - #include "stm32h7xx_hal_usart.h" -#endif /* HAL_USART_MODULE_ENABLED */ - -#ifdef HAL_IRDA_MODULE_ENABLED - #include "stm32h7xx_hal_irda.h" -#endif /* HAL_IRDA_MODULE_ENABLED */ - -#ifdef HAL_SMARTCARD_MODULE_ENABLED - #include "stm32h7xx_hal_smartcard.h" -#endif /* HAL_SMARTCARD_MODULE_ENABLED */ - -#ifdef HAL_SMBUS_MODULE_ENABLED - #include "stm32h7xx_hal_smbus.h" -#endif /* HAL_SMBUS_MODULE_ENABLED */ - -#ifdef HAL_WWDG_MODULE_ENABLED - #include "stm32h7xx_hal_wwdg.h" -#endif /* HAL_WWDG_MODULE_ENABLED */ - -#ifdef HAL_PCD_MODULE_ENABLED - #include "stm32h7xx_hal_pcd.h" -#endif /* HAL_PCD_MODULE_ENABLED */ - -#ifdef HAL_HCD_MODULE_ENABLED - #include "stm32h7xx_hal_hcd.h" -#endif /* HAL_HCD_MODULE_ENABLED */ - -/* Exported macro ------------------------------------------------------------*/ -#ifdef USE_FULL_ASSERT -/** - * @brief The assert_param macro is used for function's parameters check. - * @param expr: If expr is false, it calls assert_failed function - * which reports the name of the source file and the source - * line number of the call that failed. - * If expr is true, it returns no value. - * @retval None - */ - #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) -/* Exported functions ------------------------------------------------------- */ - void assert_failed(uint8_t *file, uint32_t line); -#else - #define assert_param(expr) ((void)0U) -#endif /* USE_FULL_ASSERT */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32H7xx_HAL_CONF_H */ - - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ -- cgit v1.3.1 From 5d226ee733cd6de950a98f16238904ca6d351ca9 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 3 Mar 2021 20:22:55 +0700 Subject: add h745disco to family group --- .github/workflows/build.yml | 1 + hw/bsp/stm32h7/boards/stm32h745disco/board.h | 134 +++++++ hw/bsp/stm32h7/boards/stm32h745disco/board.mk | 17 + hw/bsp/stm32h7/family.c | 7 +- hw/bsp/stm32h745disco/STM32H74xXIHx_FLASH.ld | 173 --------- hw/bsp/stm32h745disco/board.mk | 58 ---- hw/bsp/stm32h745disco/stm32h745disco.c | 398 --------------------- hw/bsp/stm32h745disco/stm32h7xx_hal_conf.h | 482 -------------------------- 8 files changed, 157 insertions(+), 1113 deletions(-) create mode 100644 hw/bsp/stm32h7/boards/stm32h745disco/board.h create mode 100644 hw/bsp/stm32h7/boards/stm32h745disco/board.mk delete mode 100644 hw/bsp/stm32h745disco/STM32H74xXIHx_FLASH.ld delete mode 100644 hw/bsp/stm32h745disco/board.mk delete mode 100644 hw/bsp/stm32h745disco/stm32h745disco.c delete mode 100644 hw/bsp/stm32h745disco/stm32h7xx_hal_conf.h diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml index 2413eaf54..771a49417 100644 --- a/.github/workflows/build.yml +++ b/.github/workflows/build.yml @@ -48,6 +48,7 @@ jobs: - 'samd51' - 'stm32f4' - 'stm32f7' + - 'stm32h7' steps: - name: Setup Python uses: actions/setup-python@v2 diff --git a/hw/bsp/stm32h7/boards/stm32h745disco/board.h b/hw/bsp/stm32h7/boards/stm32h745disco/board.h new file mode 100644 index 000000000..30a7a9ff6 --- /dev/null +++ b/hw/bsp/stm32h7/boards/stm32h745disco/board.h @@ -0,0 +1,134 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2021, Ha Thach (tinyusb.org) + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#ifndef BOARD_H_ +#define BOARD_H_ + +#ifdef __cplusplus + extern "C" { +#endif + +#define LED_PORT GPIOJ +#define LED_PIN GPIO_PIN_2 +#define LED_STATE_ON 1 + +// Blue push-button +#define BUTTON_PORT GPIOC +#define BUTTON_PIN GPIO_PIN_13 +#define BUTTON_STATE_ACTIVE 1 + +// UART +#define UART_DEV USART3 +#define UART_CLK_EN __HAL_RCC_USART3_CLK_ENABLE +#define UART_GPIO_PORT GPIOB +#define UART_GPIO_AF GPIO_AF7_USART3 +#define UART_TX_PIN GPIO_PIN_10 +#define UART_RX_PIN GPIO_PIN_11 + +// VBUS Sense detection +#define OTG_FS_VBUS_SENSE 1 +#define OTG_HS_VBUS_SENSE 0 + +//--------------------------------------------------------------------+ +// RCC Clock +//--------------------------------------------------------------------+ +static inline void board_stm32h7_clock_init(void) +{ + RCC_ClkInitTypeDef RCC_ClkInitStruct; + RCC_OscInitTypeDef RCC_OscInitStruct; + RCC_PeriphCLKInitTypeDef PeriphClkInitStruct; + + /*!< Supply configuration update enable */ + /* For STM32H750XB, use "HAL_PWREx_ConfigSupply(PWR_LDO_SUPPLY);" */ + HAL_PWREx_ConfigSupply(PWR_DIRECT_SMPS_SUPPLY); + + /* The voltage scaling allows optimizing the power consumption when the + device is clocked below the maximum system frequency, to update the + voltage scaling value regarding system frequency refer to product + datasheet. */ + __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1); + + while ((PWR->D3CR & (PWR_D3CR_VOSRDY)) != PWR_D3CR_VOSRDY) {} + + /* Enable HSE Oscillator and activate PLL with HSE as source */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; + RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS; + RCC_OscInitStruct.HSIState = RCC_HSI_OFF; + RCC_OscInitStruct.CSIState = RCC_CSI_OFF; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; + + /* PLL1 for System Clock */ + RCC_OscInitStruct.PLL.PLLM = 5; + RCC_OscInitStruct.PLL.PLLN = 160; + RCC_OscInitStruct.PLL.PLLFRACN = 0; + RCC_OscInitStruct.PLL.PLLP = 2; + RCC_OscInitStruct.PLL.PLLR = 2; + RCC_OscInitStruct.PLL.PLLQ = 4; + + RCC_OscInitStruct.PLL.PLLVCOSEL = RCC_PLL1VCOMEDIUM; + RCC_OscInitStruct.PLL.PLLRGE = RCC_PLL1VCIRANGE_2; + HAL_RCC_OscConfig(&RCC_OscInitStruct); + + /* PLL3 for USB Clock */ + PeriphClkInitStruct.PLL3.PLL3M = 25; + PeriphClkInitStruct.PLL3.PLL3N = 336; + PeriphClkInitStruct.PLL3.PLL3FRACN = 0; + PeriphClkInitStruct.PLL3.PLL3P = 2; + PeriphClkInitStruct.PLL3.PLL3R = 2; + PeriphClkInitStruct.PLL3.PLL3Q = 7; + + PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_USB; + PeriphClkInitStruct.UsbClockSelection = RCC_USBCLKSOURCE_PLL3; + HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct); + + /* Select PLL as system clock source and configure bus clocks dividers */ + RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_D1PCLK1 | RCC_CLOCKTYPE_PCLK1 | \ + RCC_CLOCKTYPE_PCLK2 | RCC_CLOCKTYPE_D3PCLK1); + + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.SYSCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.AHBCLKDivider = RCC_HCLK_DIV2; + RCC_ClkInitStruct.APB1CLKDivider = RCC_APB1_DIV2; + RCC_ClkInitStruct.APB2CLKDivider = RCC_APB2_DIV2; + RCC_ClkInitStruct.APB3CLKDivider = RCC_APB3_DIV1; + HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_4); + + /*activate CSI clock mondatory for I/O Compensation Cell*/ + __HAL_RCC_CSI_ENABLE() ; + + /* Enable SYSCFG clock mondatory for I/O Compensation Cell */ + __HAL_RCC_SYSCFG_CLK_ENABLE() ; + + /* Enables the I/O Compensation Cell */ + HAL_EnableCompensationCell(); +} + +#ifdef __cplusplus + } +#endif + +#endif diff --git a/hw/bsp/stm32h7/boards/stm32h745disco/board.mk b/hw/bsp/stm32h7/boards/stm32h745disco/board.mk new file mode 100644 index 000000000..384065bde --- /dev/null +++ b/hw/bsp/stm32h7/boards/stm32h745disco/board.mk @@ -0,0 +1,17 @@ +# STM32H745I-DISCO uses OTG_FS +# FIXME: Reset enumerates, un/replug USB plug does not enumerate + +CFLAGS += -DSTM32H745xx -DCORE_CM7 -DHSE_VALUE=25000000 + +# Default is FulSpeed port +PORT ?= 0 + +SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32h745xx.s +LD_FILE = $(ST_CMSIS)/Source/Templates/gcc/linker/stm32h745xx_flash_CM7.ld + +# For flash-jlink target +JLINK_DEVICE = stm32h745xi_m7 + +# flash target using on-board stlink +flash: flash-stlink + diff --git a/hw/bsp/stm32h7/family.c b/hw/bsp/stm32h7/family.c index ad17bb9ed..e94e5c974 100644 --- a/hw/bsp/stm32h7/family.c +++ b/hw/bsp/stm32h7/family.c @@ -1,8 +1,10 @@ /* * The MIT License (MIT) * - * Copyright (c) 2019 William D. Jones (thor0505@comcast.net), - * Ha Thach (tinyusb.org) + * Copyright (c) 2019 + * William D. Jones (thor0505@comcast.net), + * Ha Thach (tinyusb.org) + * Uwe Bonnes (bon@elektron.ikp.physik.tu-darmstadt.de * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal @@ -68,6 +70,7 @@ void board_init(void) __HAL_RCC_GPIOG_CLK_ENABLE(); __HAL_RCC_GPIOH_CLK_ENABLE(); // USB ULPI NXT __HAL_RCC_GPIOI_CLK_ENABLE(); // USB ULPI NXT + __HAL_RCC_GPIOJ_CLK_ENABLE(); UART_CLK_EN(); diff --git a/hw/bsp/stm32h745disco/STM32H74xXIHx_FLASH.ld b/hw/bsp/stm32h745disco/STM32H74xXIHx_FLASH.ld deleted file mode 100644 index 59b9ff4df..000000000 --- a/hw/bsp/stm32h745disco/STM32H74xXIHx_FLASH.ld +++ /dev/null @@ -1,173 +0,0 @@ -/* -***************************************************************************** -** - -** File : LinkerScript.ld -** -** Abstract : Linker script for STM32H743XIHx Device with -** 2048KByte FLASH, 128KByte RAM -** -** Set heap size, stack size and stack location according -** to application requirements. -** -** Set memory bank area and size if external memory is used. -** -** Target : STMicroelectronics STM32 -** -** -** Distribution: The file is distributed as is, without any warranty -** of any kind. -** -** (c)Copyright Ac6. -** You may use this file as-is or modify it according to the needs of your -** project. Distribution of this file (unmodified or modified) is not -** permitted. Ac6 permit registered System Workbench for MCU users the -** rights to distribute the assembled, compiled & linked contents of this -** file as part of an application binary file, provided that it is built -** using the System Workbench for MCU toolchain. -** -***************************************************************************** -*/ - -/* Entry Point */ -ENTRY(Reset_Handler) - -/* Highest address of the user mode stack */ -_estack = 0x20020000; /* end of RAM */ -/* Generate a link error if heap and stack don't fit into RAM */ -_Min_Heap_Size = 0x200; /* required amount of heap */ -_Min_Stack_Size = 0x400; /* required amount of stack */ - -/* Specify the memory areas */ -MEMORY -{ -DTCMRAM (xrw) : ORIGIN = 0x20000000, LENGTH = 128K -RAM_D1 (xrw) : ORIGIN = 0x24000000, LENGTH = 512K -RAM_D2 (xrw) : ORIGIN = 0x30000000, LENGTH = 288K -RAM_D3 (xrw) : ORIGIN = 0x38000000, LENGTH = 64K -ITCMRAM (xrw) : ORIGIN = 0x00000000, LENGTH = 64K -FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 2048K -} - -/* Define output sections */ -SECTIONS -{ - /* The startup code goes first into FLASH */ - .isr_vector : - { - . = ALIGN(4); - KEEP(*(.isr_vector)) /* Startup code */ - . = ALIGN(4); - } >FLASH - - /* The program code and other data goes into FLASH */ - .text : - { - . = ALIGN(4); - *(.text) /* .text sections (code) */ - *(.text*) /* .text* sections (code) */ - *(.glue_7) /* glue arm to thumb code */ - *(.glue_7t) /* glue thumb to arm code */ - *(.eh_frame) - - KEEP (*(.init)) - KEEP (*(.fini)) - - . = ALIGN(4); - _etext = .; /* define a global symbols at end of code */ - } >FLASH - - /* Constant data goes into FLASH */ - .rodata : - { - . = ALIGN(4); - *(.rodata) /* .rodata sections (constants, strings, etc.) */ - *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ - . = ALIGN(4); - } >FLASH - - .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH - .ARM : { - __exidx_start = .; - *(.ARM.exidx*) - __exidx_end = .; - } >FLASH - - .preinit_array : - { - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP (*(.preinit_array*)) - PROVIDE_HIDDEN (__preinit_array_end = .); - } >FLASH - .init_array : - { - PROVIDE_HIDDEN (__init_array_start = .); - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array*)) - PROVIDE_HIDDEN (__init_array_end = .); - } >FLASH - .fini_array : - { - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP (*(SORT(.fini_array.*))) - KEEP (*(.fini_array*)) - PROVIDE_HIDDEN (__fini_array_end = .); - } >FLASH - - /* used by the startup to initialize data */ - _sidata = LOADADDR(.data); - - /* Initialized data sections goes into RAM, load LMA copy after code */ - .data : - { - . = ALIGN(4); - _sdata = .; /* create a global symbol at data start */ - *(.data) /* .data sections */ - *(.data*) /* .data* sections */ - - . = ALIGN(4); - _edata = .; /* define a global symbol at data end */ - } >DTCMRAM AT> FLASH - - - /* Uninitialized data section */ - . = ALIGN(4); - .bss : - { - /* This is used by the startup in order to initialize the .bss secion */ - _sbss = .; /* define a global symbol at bss start */ - __bss_start__ = _sbss; - *(.bss) - *(.bss*) - *(COMMON) - - . = ALIGN(4); - _ebss = .; /* define a global symbol at bss end */ - __bss_end__ = _ebss; - } >DTCMRAM - - /* User_heap_stack section, used to check that there is enough RAM left */ - ._user_heap_stack : - { - . = ALIGN(8); - PROVIDE ( end = . ); - PROVIDE ( _end = . ); - . = . + _Min_Heap_Size; - . = . + _Min_Stack_Size; - . = ALIGN(8); - } >DTCMRAM - - - - /* Remove information from the standard libraries */ - /DISCARD/ : - { - libc.a ( * ) - libm.a ( * ) - libgcc.a ( * ) - } - - .ARM.attributes 0 : { *(.ARM.attributes) } -} - - diff --git a/hw/bsp/stm32h745disco/board.mk b/hw/bsp/stm32h745disco/board.mk deleted file mode 100644 index 78f22a5a2..000000000 --- a/hw/bsp/stm32h745disco/board.mk +++ /dev/null @@ -1,58 +0,0 @@ -# STM32H745I-DISCO uses OTG_FS -# FIXME: Reset enumerates, un/replug USB plug does not enumerate - -CFLAGS += \ - -flto \ - -mthumb \ - -mabi=aapcs \ - -mcpu=cortex-m7 \ - -mfloat-abi=hard \ - -mfpu=fpv5-d16 \ - -nostdlib -nostartfiles \ - -DSTM32H745xx \ - -DCORE_CM7 \ - -DCFG_TUSB_MCU=OPT_MCU_STM32H7 \ - -DBOARD_DEVICE_RHPORT_NUM=0 \ - -DBOARD_DEVICE_RHPORT_SPEED=OPT_MODE_FULL_SPEED - -# suppress warning caused by vendor mcu driver -CFLAGS += -Wno-error=maybe-uninitialized -Wno-error=cast-align - -ST_FAMILY = h7 -ST_CMSIS = hw/mcu/st/cmsis_device_$(ST_FAMILY) -ST_HAL_DRIVER = hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver - -# All source paths should be relative to the top level. -LD_FILE = hw/bsp/$(BOARD)/STM32H74xXIHx_FLASH.ld - -SRC_C += \ - $(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_cortex.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc_ex.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_gpio.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_uart.c \ - $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_pwr_ex.c - -SRC_S += \ - $(ST_CMSIS)/Source/Templates/gcc/startup_stm32h745xx.s - -INC += \ - $(TOP)/lib/CMSIS_5/CMSIS/Core/Include \ - $(TOP)/$(ST_CMSIS)/Include \ - $(TOP)/$(ST_HAL_DRIVER)/Inc \ - $(TOP)/hw/bsp/$(BOARD) - -# For TinyUSB port source -VENDOR = st -CHIP_FAMILY = synopsys - -# For freeRTOS port source -FREERTOS_PORT = ARM_CM7/r0p1 - -# For flash-jlink target -JLINK_DEVICE = stm32h745xi - -# flash target using on-board stlink -flash: flash-stlink diff --git a/hw/bsp/stm32h745disco/stm32h745disco.c b/hw/bsp/stm32h745disco/stm32h745disco.c deleted file mode 100644 index d4fcdbfc0..000000000 --- a/hw/bsp/stm32h745disco/stm32h745disco.c +++ /dev/null @@ -1,398 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2019 William D. Jones (thor0505@comcast.net), - * Ha Thach (tinyusb.org) - * Uwe Bonnes (bon@elektron.ikp.physik.tu-darmstadt.de - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "../board.h" - -#include "stm32h7xx_hal.h" - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ - -// Despite being call USB2_OTG -// OTG_FS is marked as RHPort0 by TinyUSB to be consistent across stm32 port -void OTG_FS_IRQHandler(void) -{ - tud_int_handler(0); -} - -// Despite being call USB2_OTG -// OTG_HS is marked as RHPort1 by TinyUSB to be consistent across stm32 port -void OTG_HS_IRQHandler(void) -{ - tud_int_handler(1); -} - - -//--------------------------------------------------------------------+ -// MACRO TYPEDEF CONSTANT ENUM -//--------------------------------------------------------------------+ - -#define LED_PORT GPIOJ -#define LED_PIN GPIO_PIN_2 -#define LED_STATE_ON 1 - -// Blue push-button -#define BUTTON_PORT GPIOC -#define BUTTON_PIN GPIO_PIN_13 -#define BUTTON_STATE_ACTIVE 1 - -// UART -#define UARTx USART3 -#define UART_GPIO_PORT GPIOB -#define UART_GPIO_AF GPIO_AF7_USART3 -#define UART_TX_PIN GPIO_PIN_10 -#define UART_RX_PIN GPIO_PIN_11 - -UART_HandleTypeDef UartHandle; - -// enable all LED, Button, Uart, USB clock -static void all_rcc_clk_enable(void) -{ - __HAL_RCC_GPIOA_CLK_ENABLE(); // OTG_FS - __HAL_RCC_GPIOB_CLK_ENABLE(); // USART3 (VCP - __HAL_RCC_GPIOC_CLK_ENABLE(); // Button - __HAL_RCC_GPIOJ_CLK_ENABLE(); // LED - __HAL_RCC_USART3_CLK_ENABLE(); // Uart module -} - -/* PWR, RCC, GPIO (All): AHB4 (D3 domain) - USB{1,2} OTG_{H,F}S: AHB1 (D2 domain) -*/ - -/** - * @brief System Clock Configuration - * The system Clock is configured as follow : - * System Clock source = PLL (HSE) - * SYSCLK(Hz) = 400000000 (CPU Clock) - * HCLK(Hz) = 200000000 (AXI and AHBs Clock) - * AHB Prescaler = 2 - * D1 APB3 Prescaler = 2 (APB3 Clock 100MHz) - * D2 APB1 Prescaler = 2 (APB1 Clock 100MHz) - * D2 APB2 Prescaler = 2 (APB2 Clock 100MHz) - * D3 APB4 Prescaler = 2 (APB4 Clock 100MHz) - * HSE Frequency(Hz) = 25000000 - * PLL_M = 5 - * PLL_N = 160 - * PLL_P = 2 - * PLL_Q = 4 - * PLL_R = 2 - * PLL3_M = 25 - * PLL3_N = 336 - * PLL3_P = 2 - * PLL3_Q = 7 - * PLL3_R = 2 - * VDD(V) = 3.3 - * Flash Latency(WS) = 4 - * @param None - * @retval None - */ - -void SystemClock_Config(void) -{ - RCC_ClkInitTypeDef RCC_ClkInitStruct; - RCC_OscInitTypeDef RCC_OscInitStruct; - RCC_PeriphCLKInitTypeDef PeriphClkInitStruct; - - /*!< Supply configuration update enable */ - /* For STM32H750XB, use "HAL_PWREx_ConfigSupply(PWR_LDO_SUPPLY);" */ - HAL_PWREx_ConfigSupply(PWR_DIRECT_SMPS_SUPPLY); - - /* The voltage scaling allows optimizing the power consumption when the - device is clocked below the maximum system frequency, to update the - voltage scaling value regarding system frequency refer to product - datasheet. */ - __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1); - - while ((PWR->D3CR & (PWR_D3CR_VOSRDY)) != PWR_D3CR_VOSRDY) {} - - /* Enable HSE Oscillator and activate PLL with HSE as source */ - RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; - RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS; - RCC_OscInitStruct.HSIState = RCC_HSI_OFF; - RCC_OscInitStruct.CSIState = RCC_CSI_OFF; - RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; - RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; - - /* PLL1 for System Clock */ - RCC_OscInitStruct.PLL.PLLM = 5; - RCC_OscInitStruct.PLL.PLLN = 160; - RCC_OscInitStruct.PLL.PLLFRACN = 0; - RCC_OscInitStruct.PLL.PLLP = 2; - RCC_OscInitStruct.PLL.PLLR = 2; - RCC_OscInitStruct.PLL.PLLQ = 4; - - RCC_OscInitStruct.PLL.PLLVCOSEL = RCC_PLL1VCOMEDIUM; - RCC_OscInitStruct.PLL.PLLRGE = RCC_PLL1VCIRANGE_2; - HAL_RCC_OscConfig(&RCC_OscInitStruct); - - /* PLL3 for USB Clock */ - PeriphClkInitStruct.PLL3.PLL3M = 25; - PeriphClkInitStruct.PLL3.PLL3N = 336; - PeriphClkInitStruct.PLL3.PLL3FRACN = 0; - PeriphClkInitStruct.PLL3.PLL3P = 2; - PeriphClkInitStruct.PLL3.PLL3R = 2; - PeriphClkInitStruct.PLL3.PLL3Q = 7; - - PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_USB; - PeriphClkInitStruct.UsbClockSelection = RCC_USBCLKSOURCE_PLL3; - HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct); - - /* Select PLL as system clock source and configure bus clocks dividers */ - RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_D1PCLK1 | RCC_CLOCKTYPE_PCLK1 | \ - RCC_CLOCKTYPE_PCLK2 | RCC_CLOCKTYPE_D3PCLK1); - - RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; - RCC_ClkInitStruct.SYSCLKDivider = RCC_SYSCLK_DIV1; - RCC_ClkInitStruct.AHBCLKDivider = RCC_HCLK_DIV2; - RCC_ClkInitStruct.APB1CLKDivider = RCC_APB1_DIV2; - RCC_ClkInitStruct.APB2CLKDivider = RCC_APB2_DIV2; - RCC_ClkInitStruct.APB3CLKDivider = RCC_APB3_DIV1; - HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_4); - - /*activate CSI clock mondatory for I/O Compensation Cell*/ - __HAL_RCC_CSI_ENABLE() ; - - /* Enable SYSCFG clock mondatory for I/O Compensation Cell */ - __HAL_RCC_SYSCFG_CLK_ENABLE() ; - - /* Enables the I/O Compensation Cell */ - HAL_EnableCompensationCell(); -} - -void board_init(void) -{ - SystemClock_Config(); - all_rcc_clk_enable(); - - // 1ms tick timer - SysTick_Config(SystemCoreClock / 1000); - -#if CFG_TUSB_OS == OPT_OS_FREERTOS - // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) - NVIC_SetPriority(OTG_FS_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); - NVIC_SetPriority(OTG_HS_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); -#endif - - GPIO_InitTypeDef GPIO_InitStruct; - - // LED - GPIO_InitStruct.Pin = LED_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; - GPIO_InitStruct.Pull = GPIO_PULLUP; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - HAL_GPIO_Init(LED_PORT, &GPIO_InitStruct); - - // Button - GPIO_InitStruct.Pin = BUTTON_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_INPUT; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - HAL_GPIO_Init(BUTTON_PORT, &GPIO_InitStruct); - - // Uart - GPIO_InitStruct.Pin = UART_TX_PIN | UART_RX_PIN; - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Pull = GPIO_PULLUP; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; - GPIO_InitStruct.Alternate = UART_GPIO_AF; - HAL_GPIO_Init(UART_GPIO_PORT, &GPIO_InitStruct); - - UartHandle.Instance = UARTx; - UartHandle.Init.BaudRate = CFG_BOARD_UART_BAUDRATE; - UartHandle.Init.WordLength = UART_WORDLENGTH_8B; - UartHandle.Init.StopBits = UART_STOPBITS_1; - UartHandle.Init.Parity = UART_PARITY_NONE; - UartHandle.Init.HwFlowCtl = UART_HWCONTROL_NONE; - UartHandle.Init.Mode = UART_MODE_TX_RX; - UartHandle.Init.OverSampling = UART_OVERSAMPLING_16; - HAL_UART_Init(&UartHandle); - -#if BOARD_DEVICE_RHPORT_NUM == 0 - // Despite being call USB2_OTG - // OTG_FS is marked as RHPort0 by TinyUSB to be consistent across stm32 port - // PA9 VUSB, PA10 ID, PA11 DM, PA12 DP - - __HAL_RCC_GPIOA_CLK_ENABLE(); - - /* Configure DM DP Pins */ - GPIO_InitStruct.Pin = GPIO_PIN_11 | GPIO_PIN_12; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Alternate = GPIO_AF10_OTG1_FS; - HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); - - /* Configure VBUS Pin */ - GPIO_InitStruct.Pin = GPIO_PIN_9; - GPIO_InitStruct.Mode = GPIO_MODE_INPUT; - GPIO_InitStruct.Pull = GPIO_NOPULL; - HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); - - /* This for ID line debug */ - GPIO_InitStruct.Pin = GPIO_PIN_10; - GPIO_InitStruct.Mode = GPIO_MODE_AF_OD; - GPIO_InitStruct.Pull = GPIO_PULLUP; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - GPIO_InitStruct.Alternate = GPIO_AF10_OTG1_FS; - HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); - - // https://community.st.com/s/question/0D50X00009XkYZLSA3/stm32h7-nucleo-usb-fs-cdc - HAL_PWREx_EnableUSBVoltageDetector(); - __HAL_RCC_USB2_OTG_FS_CLK_ENABLE(); - - // Enable VBUS sense (B device) via pin PA9 - USB_OTG_FS->GCCFG |= USB_OTG_GCCFG_VBDEN; - -#elif BOARD_DEVICE_RHPORT_NUM == 1 - - // Despite being call USB2_OTG - // OTG_HS is marked as RHPort1 by TinyUSB to be consistent across stm32 port - __GPIOA_CLK_ENABLE(); - __GPIOB_CLK_ENABLE(); - __GPIOC_CLK_ENABLE(); - __GPIOH_CLK_ENABLE(); - __GPIOI_CLK_ENABLE(); - - /* CLK */ - GPIO_InitStruct.Pin = GPIO_PIN_5; - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; - GPIO_InitStruct.Alternate = GPIO_AF10_OTG2_HS; - HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); - - /* D0 */ - GPIO_InitStruct.Pin = GPIO_PIN_3; - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; - GPIO_InitStruct.Alternate = GPIO_AF10_OTG2_HS; - HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); - - /* D1 D2 D3 D4 D5 D6 D7 */ - GPIO_InitStruct.Pin = GPIO_PIN_0 | GPIO_PIN_1 | GPIO_PIN_5 | GPIO_PIN_10 | GPIO_PIN_11 | GPIO_PIN_12 | GPIO_PIN_13; - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Alternate = GPIO_AF10_OTG2_HS; - HAL_GPIO_Init(GPIOB, &GPIO_InitStruct); - - /* STP */ - GPIO_InitStruct.Pin = GPIO_PIN_0; - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Alternate = GPIO_AF10_OTG2_HS; - HAL_GPIO_Init(GPIOC, &GPIO_InitStruct); - - /* NXT */ - GPIO_InitStruct.Pin = GPIO_PIN_4; - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Alternate = GPIO_AF10_OTG2_HS; - HAL_GPIO_Init(GPIOH, &GPIO_InitStruct); - - /* DIR */ - GPIO_InitStruct.Pin = GPIO_PIN_11; - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Pull = GPIO_NOPULL; - GPIO_InitStruct.Alternate = GPIO_AF10_OTG2_HS; - HAL_GPIO_Init(GPIOI, &GPIO_InitStruct); - - // Enable ULPI clock - __HAL_RCC_USB1_OTG_HS_ULPI_CLK_ENABLE(); - - /* Enable USB HS Clocks */ - __HAL_RCC_USB1_OTG_HS_CLK_ENABLE(); - - // No VBUS sense - USB_OTG_HS->GCCFG &= ~USB_OTG_GCCFG_VBDEN; - - // B-peripheral session valid override enable - USB_OTG_HS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOEN; - USB_OTG_HS->GOTGCTL |= USB_OTG_GOTGCTL_BVALOVAL; - - // Force device mode - USB_OTG_HS->GUSBCFG &= ~USB_OTG_GUSBCFG_FHMOD; - USB_OTG_HS->GUSBCFG |= USB_OTG_GUSBCFG_FDMOD; - - HAL_PWREx_EnableUSBVoltageDetector(); -#endif // rhport = 1 - -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - HAL_GPIO_WritePin(LED_PORT, LED_PIN, state); -} - -uint32_t board_button_read(void) -{ - return (BUTTON_STATE_ACTIVE == HAL_GPIO_ReadPin(BUTTON_PORT, BUTTON_PIN)) ? 1 : 0; -} - -int board_uart_read(uint8_t* buf, int len) -{ - (void) buf; (void) len; - return 0; -} - -int board_uart_write(void const * buf, int len) -{ - HAL_UART_Transmit(&UartHandle, (uint8_t*) buf, len, 0xffff); - return len; -} - - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void SysTick_Handler (void) -{ - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif - -void HardFault_Handler (void) -{ - asm("bkpt"); -} - -// Required by __libc_init_array in startup code if we are compiling using -// -nostdlib/-nostartfiles. -void _init(void) -{ - -} diff --git a/hw/bsp/stm32h745disco/stm32h7xx_hal_conf.h b/hw/bsp/stm32h745disco/stm32h7xx_hal_conf.h deleted file mode 100644 index b9fa348ec..000000000 --- a/hw/bsp/stm32h745disco/stm32h7xx_hal_conf.h +++ /dev/null @@ -1,482 +0,0 @@ -/** - ****************************************************************************** - * @file stm32h7xx_hal_conf_template.h - * @brief HAL configuration template file. - * This file should be copied to the application folder and renamed - * to stm32h7xx_hal_conf.h. - ****************************************************************************** - * @attention - * - *

© COPYRIGHT(c) 2019 STMicroelectronics

- * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32H7xx_HAL_CONF_H -#define __STM32H7xx_HAL_CONF_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ - -/* ########################## Module Selection ############################## */ -/** - * @brief This is the list of modules to be used in the HAL driver - */ -#define HAL_MODULE_ENABLED -#define HAL_ADC_MODULE_ENABLED -/* #define HAL_CEC_MODULE_ENABLED */ -/* #define HAL_COMP_MODULE_ENABLED */ -#define HAL_CORTEX_MODULE_ENABLED -/* #define HAL_CRC_MODULE_ENABLED */ -/* #define HAL_CRYP_MODULE_ENABLED */ -/* #define HAL_DAC_MODULE_ENABLED */ -/* #define HAL_DCMI_MODULE_ENABLED */ -/* #define HAL_DFSDM_MODULE_ENABLED */ -#define HAL_DMA_MODULE_ENABLED -/* #define HAL_DMA2D_MODULE_ENABLED */ -/* #define HAL_ETH_MODULE_ENABLED */ -/* #define HAL_EXTI_MODULE_ENABLED */ -/* #define HAL_FDCAN_MODULE_ENABLED */ -#define HAL_FLASH_MODULE_ENABLED -#define HAL_GPIO_MODULE_ENABLED -/* #define HAL_HASH_MODULE_ENABLED */ -/* #define HAL_HCD_MODULE_ENABLED */ -/* #define HAL_HRTIM_MODULE_ENABLED */ -/* #define HAL_HSEM_MODULE_ENABLED */ -/* #define HAL_I2C_MODULE_ENABLED */ -/* #define HAL_I2S_MODULE_ENABLED */ -/* #define HAL_IRDA_MODULE_ENABLED */ -/* #define HAL_IWDG_MODULE_ENABLED */ -/* #define HAL_JPEG_MODULE_ENABLED */ -/* #define HAL_LPTIM_MODULE_ENABLED */ -/* #define HAL_LTDC_MODULE_ENABLED */ -/* #define HAL_MDIOS_MODULE_ENABLED */ -/* #define HAL_MDMA_MODULE_ENABLED */ -/* #define HAL_MMC_MODULE_ENABLED */ -/* #define HAL_NAND_MODULE_ENABLED */ -/* #define HAL_NOR_MODULE_ENABLED */ -/* #define HAL_OPAMP_MODULE_ENABLED */ -/* #define HAL_PCD_MODULE_ENABLED */ -#define HAL_PWR_MODULE_ENABLED -/* #define HAL_QSPI_MODULE_ENABLED */ -/* #define HAL_RAMECC_MODULE_ENABLED */ -#define HAL_RCC_MODULE_ENABLED -/* #define HAL_RNG_MODULE_ENABLED */ -/* #define HAL_RTC_MODULE_ENABLED */ -/* #define HAL_SAI_MODULE_ENABLED */ -/* #define HAL_SD_MODULE_ENABLED */ -/* #define HAL_SDRAM_MODULE_ENABLED */ -/* #define HAL_SMARTCARD_MODULE_ENABLED */ -/* #define HAL_SMBUS_MODULE_ENABLED */ -/* #define HAL_SPDIFRX_MODULE_ENABLED */ -#define HAL_SPI_MODULE_ENABLED -/* #define HAL_SRAM_MODULE_ENABLED */ -/* #define HAL_SWPMI_MODULE_ENABLED */ -/* #define HAL_TIM_MODULE_ENABLED */ -#define HAL_UART_MODULE_ENABLED -/* #define HAL_USART_MODULE_ENABLED */ -/* #define HAL_WWDG_MODULE_ENABLED */ - -/* ########################## Oscillator Values adaptation ####################*/ -/** - * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). - */ -#if !defined (HSE_VALUE) -#define HSE_VALUE ((uint32_t)25000000) /*!< Value of the External oscillator in Hz */ -#endif /* HSE_VALUE */ - -#if !defined (HSE_STARTUP_TIMEOUT) - #define HSE_STARTUP_TIMEOUT ((uint32_t)5000) /*!< Time out for HSE start up, in ms */ -#endif /* HSE_STARTUP_TIMEOUT */ - -/** - * @brief Internal oscillator (CSI) default value. - * This value is the default CSI value after Reset. - */ -#if !defined (CSI_VALUE) - #define CSI_VALUE ((uint32_t)4000000) /*!< Value of the Internal oscillator in Hz*/ -#endif /* CSI_VALUE */ - -/** - * @brief Internal High Speed oscillator (HSI) value. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). - */ -#if !defined (HSI_VALUE) - #define HSI_VALUE ((uint32_t)64000000) /*!< Value of the Internal oscillator in Hz*/ -#endif /* HSI_VALUE */ - -/** - * @brief External Low Speed oscillator (LSE) value. - * This value is used by the UART, RTC HAL module to compute the system frequency - */ -#if !defined (LSE_VALUE) - #define LSE_VALUE ((uint32_t)32768) /*!< Value of the External oscillator in Hz*/ -#endif /* LSE_VALUE */ - - -#if !defined (LSE_STARTUP_TIMEOUT) - #define LSE_STARTUP_TIMEOUT ((uint32_t)5000) /*!< Time out for LSE start up, in ms */ -#endif /* LSE_STARTUP_TIMEOUT */ - -#if !defined (LSI_VALUE) - #define LSI_VALUE ((uint32_t)32000) /*!< LSI Typical Value in Hz*/ -#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz - The real value may vary depending on the variations - in voltage and temperature.*/ - -/** - * @brief External clock source for I2S peripheral - * This value is used by the I2S HAL module to compute the I2S clock source - * frequency, this source is inserted directly through I2S_CKIN pad. - */ -#if !defined (EXTERNAL_CLOCK_VALUE) - #define EXTERNAL_CLOCK_VALUE 12288000U /*!< Value of the External clock in Hz*/ -#endif /* EXTERNAL_CLOCK_VALUE */ - -/* Tip: To avoid modifying this file each time you need to use different HSE, - === you can define the HSE value in your toolchain compiler preprocessor. */ - -/* ########################### System Configuration ######################### */ -/** - * @brief This is the HAL system configuration section - */ -#define VDD_VALUE ((uint32_t)3300) /*!< Value of VDD in mv */ -#define TICK_INT_PRIORITY ((uint32_t)0x0F) /*!< tick interrupt priority */ -#define USE_RTOS 0 -#define USE_SD_TRANSCEIVER 1U /*!< use uSD Transceiver */ -#define USE_SPI_CRC 1U /*!< use CRC in SPI */ - -#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ -#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ -#define USE_HAL_COMP_REGISTER_CALLBACKS 0U /* COMP register callback disabled */ -#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */ -#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ -#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */ -#define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */ -#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */ -#define USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */ -#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */ -#define USE_HAL_FDCAN_REGISTER_CALLBACKS 0U /* FDCAN register callback disabled */ -#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ -#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ -#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */ -#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ -#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */ -#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */ -#define USE_HAL_HRTIM_REGISTER_CALLBACKS 0U /* HRTIM register callback disabled */ -#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ -#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ -#define USE_HAL_JPEG_REGISTER_CALLBACKS 0U /* JPEG register callback disabled */ -#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */ -#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */ -#define USE_HAL_MDIOS_REGISTER_CALLBACKS 0U /* MDIO register callback disabled */ -#define USE_HAL_OPAMP_REGISTER_CALLBACKS 0U /* MDIO register callback disabled */ -#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ -#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */ -#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */ -#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ -#define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */ -#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */ -#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ -#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ -#define USE_HAL_SWPMI_REGISTER_CALLBACKS 0U /* SWPMI register callback disabled */ -#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ -#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ -#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ -#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ - -/* ########################### Ethernet Configuration ######################### */ -#define ETH_TX_DESC_CNT 4 /* number of Ethernet Tx DMA descriptors */ -#define ETH_RX_DESC_CNT 4 /* number of Ethernet Rx DMA descriptors */ - -#define ETH_MAC_ADDR0 ((uint8_t)0x02) -#define ETH_MAC_ADDR1 ((uint8_t)0x00) -#define ETH_MAC_ADDR2 ((uint8_t)0x00) -#define ETH_MAC_ADDR3 ((uint8_t)0x00) -#define ETH_MAC_ADDR4 ((uint8_t)0x00) -#define ETH_MAC_ADDR5 ((uint8_t)0x00) - -/* ########################## Assert Selection ############################## */ -/** - * @brief Uncomment the line below to expanse the "assert_param" macro in the - * HAL drivers code - */ -/* #define USE_FULL_ASSERT 1 */ - - -/* Includes ------------------------------------------------------------------*/ -/** - * @brief Include module's header file - */ - -#ifdef HAL_RCC_MODULE_ENABLED - #include "stm32h7xx_hal_rcc.h" -#endif /* HAL_RCC_MODULE_ENABLED */ - -#ifdef HAL_GPIO_MODULE_ENABLED - #include "stm32h7xx_hal_gpio.h" -#endif /* HAL_GPIO_MODULE_ENABLED */ - -#ifdef HAL_DMA_MODULE_ENABLED - #include "stm32h7xx_hal_dma.h" -#endif /* HAL_DMA_MODULE_ENABLED */ - -#ifdef HAL_MDMA_MODULE_ENABLED - #include "stm32h7xx_hal_mdma.h" -#endif /* HAL_MDMA_MODULE_ENABLED */ - -#ifdef HAL_HASH_MODULE_ENABLED - #include "stm32h7xx_hal_hash.h" -#endif /* HAL_HASH_MODULE_ENABLED */ - -#ifdef HAL_DCMI_MODULE_ENABLED - #include "stm32h7xx_hal_dcmi.h" -#endif /* HAL_DCMI_MODULE_ENABLED */ - -#ifdef HAL_DMA2D_MODULE_ENABLED - #include "stm32h7xx_hal_dma2d.h" -#endif /* HAL_DMA2D_MODULE_ENABLED */ - -#ifdef HAL_DSI_MODULE_ENABLED - #include "stm32h7xx_hal_dsi.h" -#endif /* HAL_DSI_MODULE_ENABLED */ - -#ifdef HAL_DFSDM_MODULE_ENABLED - #include "stm32h7xx_hal_dfsdm.h" -#endif /* HAL_DFSDM_MODULE_ENABLED */ - -#ifdef HAL_ETH_MODULE_ENABLED - #include "stm32h7xx_hal_eth.h" -#endif /* HAL_ETH_MODULE_ENABLED */ - -#ifdef HAL_EXTI_MODULE_ENABLED - #include "stm32h7xx_hal_exti.h" -#endif /* HAL_EXTI_MODULE_ENABLED */ - -#ifdef HAL_CORTEX_MODULE_ENABLED - #include "stm32h7xx_hal_cortex.h" -#endif /* HAL_CORTEX_MODULE_ENABLED */ - -#ifdef HAL_ADC_MODULE_ENABLED - #include "stm32h7xx_hal_adc.h" -#endif /* HAL_ADC_MODULE_ENABLED */ - -#ifdef HAL_FDCAN_MODULE_ENABLED - #include "stm32h7xx_hal_fdcan.h" -#endif /* HAL_FDCAN_MODULE_ENABLED */ - -#ifdef HAL_CEC_MODULE_ENABLED - #include "stm32h7xx_hal_cec.h" -#endif /* HAL_CEC_MODULE_ENABLED */ - -#ifdef HAL_COMP_MODULE_ENABLED - #include "stm32h7xx_hal_comp.h" -#endif /* HAL_COMP_MODULE_ENABLED */ - -#ifdef HAL_CRC_MODULE_ENABLED - #include "stm32h7xx_hal_crc.h" -#endif /* HAL_CRC_MODULE_ENABLED */ - -#ifdef HAL_CRYP_MODULE_ENABLED - #include "stm32h7xx_hal_cryp.h" -#endif /* HAL_CRYP_MODULE_ENABLED */ - -#ifdef HAL_DAC_MODULE_ENABLED - #include "stm32h7xx_hal_dac.h" -#endif /* HAL_DAC_MODULE_ENABLED */ - -#ifdef HAL_FLASH_MODULE_ENABLED - #include "stm32h7xx_hal_flash.h" -#endif /* HAL_FLASH_MODULE_ENABLED */ - -#ifdef HAL_HRTIM_MODULE_ENABLED - #include "stm32h7xx_hal_hrtim.h" -#endif /* HAL_HRTIM_MODULE_ENABLED */ - -#ifdef HAL_HSEM_MODULE_ENABLED - #include "stm32h7xx_hal_hsem.h" -#endif /* HAL_HSEM_MODULE_ENABLED */ - -#ifdef HAL_SRAM_MODULE_ENABLED - #include "stm32h7xx_hal_sram.h" -#endif /* HAL_SRAM_MODULE_ENABLED */ - -#ifdef HAL_NOR_MODULE_ENABLED - #include "stm32h7xx_hal_nor.h" -#endif /* HAL_NOR_MODULE_ENABLED */ - -#ifdef HAL_NAND_MODULE_ENABLED - #include "stm32h7xx_hal_nand.h" -#endif /* HAL_NAND_MODULE_ENABLED */ - -#ifdef HAL_I2C_MODULE_ENABLED - #include "stm32h7xx_hal_i2c.h" -#endif /* HAL_I2C_MODULE_ENABLED */ - -#ifdef HAL_I2S_MODULE_ENABLED - #include "stm32h7xx_hal_i2s.h" -#endif /* HAL_I2S_MODULE_ENABLED */ - -#ifdef HAL_IWDG_MODULE_ENABLED - #include "stm32h7xx_hal_iwdg.h" -#endif /* HAL_IWDG_MODULE_ENABLED */ - -#ifdef HAL_JPEG_MODULE_ENABLED - #include "stm32h7xx_hal_jpeg.h" -#endif /* HAL_JPEG_MODULE_ENABLED */ - -#ifdef HAL_MDIOS_MODULE_ENABLED - #include "stm32h7xx_hal_mdios.h" -#endif /* HAL_MDIOS_MODULE_ENABLED */ - -#ifdef HAL_MMC_MODULE_ENABLED - #include "stm32h7xx_hal_mmc.h" -#endif /* HAL_MMC_MODULE_ENABLED */ - -#ifdef HAL_LPTIM_MODULE_ENABLED -#include "stm32h7xx_hal_lptim.h" -#endif /* HAL_LPTIM_MODULE_ENABLED */ - -#ifdef HAL_LTDC_MODULE_ENABLED -#include "stm32h7xx_hal_ltdc.h" -#endif /* HAL_LTDC_MODULE_ENABLED */ - -#ifdef HAL_OPAMP_MODULE_ENABLED -#include "stm32h7xx_hal_opamp.h" -#endif /* HAL_OPAMP_MODULE_ENABLED */ - -#ifdef HAL_PWR_MODULE_ENABLED - #include "stm32h7xx_hal_pwr.h" -#endif /* HAL_PWR_MODULE_ENABLED */ - -#ifdef HAL_QSPI_MODULE_ENABLED - #include "stm32h7xx_hal_qspi.h" -#endif /* HAL_QSPI_MODULE_ENABLED */ - -#ifdef HAL_RAMECC_MODULE_ENABLED - #include "stm32h7xx_hal_ramecc.h" -#endif /* HAL_HCD_MODULE_ENABLED */ - -#ifdef HAL_RNG_MODULE_ENABLED - #include "stm32h7xx_hal_rng.h" -#endif /* HAL_RNG_MODULE_ENABLED */ - -#ifdef HAL_RTC_MODULE_ENABLED - #include "stm32h7xx_hal_rtc.h" -#endif /* HAL_RTC_MODULE_ENABLED */ - -#ifdef HAL_SAI_MODULE_ENABLED - #include "stm32h7xx_hal_sai.h" -#endif /* HAL_SAI_MODULE_ENABLED */ - -#ifdef HAL_SD_MODULE_ENABLED - #include "stm32h7xx_hal_sd.h" -#endif /* HAL_SD_MODULE_ENABLED */ - -#ifdef HAL_SDRAM_MODULE_ENABLED - #include "stm32h7xx_hal_sdram.h" -#endif /* HAL_SDRAM_MODULE_ENABLED */ - -#ifdef HAL_SPI_MODULE_ENABLED - #include "stm32h7xx_hal_spi.h" -#endif /* HAL_SPI_MODULE_ENABLED */ - -#ifdef HAL_SPDIFRX_MODULE_ENABLED - #include "stm32h7xx_hal_spdifrx.h" -#endif /* HAL_SPDIFRX_MODULE_ENABLED */ - -#ifdef HAL_SWPMI_MODULE_ENABLED - #include "stm32h7xx_hal_swpmi.h" -#endif /* HAL_SWPMI_MODULE_ENABLED */ - -#ifdef HAL_TIM_MODULE_ENABLED - #include "stm32h7xx_hal_tim.h" -#endif /* HAL_TIM_MODULE_ENABLED */ - -#ifdef HAL_UART_MODULE_ENABLED - #include "stm32h7xx_hal_uart.h" -#endif /* HAL_UART_MODULE_ENABLED */ - -#ifdef HAL_USART_MODULE_ENABLED - #include "stm32h7xx_hal_usart.h" -#endif /* HAL_USART_MODULE_ENABLED */ - -#ifdef HAL_IRDA_MODULE_ENABLED - #include "stm32h7xx_hal_irda.h" -#endif /* HAL_IRDA_MODULE_ENABLED */ - -#ifdef HAL_SMARTCARD_MODULE_ENABLED - #include "stm32h7xx_hal_smartcard.h" -#endif /* HAL_SMARTCARD_MODULE_ENABLED */ - -#ifdef HAL_SMBUS_MODULE_ENABLED - #include "stm32h7xx_hal_smbus.h" -#endif /* HAL_SMBUS_MODULE_ENABLED */ - -#ifdef HAL_WWDG_MODULE_ENABLED - #include "stm32h7xx_hal_wwdg.h" -#endif /* HAL_WWDG_MODULE_ENABLED */ - -#ifdef HAL_PCD_MODULE_ENABLED - #include "stm32h7xx_hal_pcd.h" -#endif /* HAL_PCD_MODULE_ENABLED */ - -#ifdef HAL_HCD_MODULE_ENABLED - #include "stm32h7xx_hal_hcd.h" -#endif /* HAL_HCD_MODULE_ENABLED */ - -/* Exported macro ------------------------------------------------------------*/ -#ifdef USE_FULL_ASSERT -/** - * @brief The assert_param macro is used for function's parameters check. - * @param expr: If expr is false, it calls assert_failed function - * which reports the name of the source file and the source - * line number of the call that failed. - * If expr is true, it returns no value. - * @retval None - */ - #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) -/* Exported functions ------------------------------------------------------- */ - void assert_failed(uint8_t *file, uint32_t line); -#else - #define assert_param(expr) ((void)0U) -#endif /* USE_FULL_ASSERT */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32H7xx_HAL_CONF_H */ - - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ -- cgit v1.3.1 From 16f501a14eb98ef393d73d2a2dc3eb3653e98437 Mon Sep 17 00:00:00 2001 From: hathach Date: Wed, 3 Mar 2021 20:25:44 +0700 Subject: clean up --- hw/bsp/stm32f4/family.mk | 10 +++++----- hw/bsp/stm32f7/family.mk | 10 +++++----- hw/bsp/stm32h7/family.mk | 4 ++-- 3 files changed, 12 insertions(+), 12 deletions(-) diff --git a/hw/bsp/stm32f4/family.mk b/hw/bsp/stm32f4/family.mk index c974dc109..299f084de 100644 --- a/hw/bsp/stm32f4/family.mk +++ b/hw/bsp/stm32f4/family.mk @@ -1,5 +1,9 @@ UF2_FAMILY_ID = 0x57755a57 -FAMILY_SUBMODULES = hw/mcu/st/cmsis_device_f4 hw/mcu/st/stm32f4xx_hal_driver +ST_FAMILY = f4 +FAMILY_SUBMODULES = hw/mcu/st/cmsis_device_$(ST_FAMILY) hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver + +ST_CMSIS = hw/mcu/st/cmsis_device_$(ST_FAMILY) +ST_HAL_DRIVER = hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver include $(TOP)/$(BOARD_PATH)/board.mk @@ -16,10 +20,6 @@ CFLAGS += \ # suppress warning caused by vendor mcu driver CFLAGS += -Wno-error=cast-align -ST_FAMILY = f4 -ST_CMSIS = hw/mcu/st/cmsis_device_$(ST_FAMILY) -ST_HAL_DRIVER = hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver - SRC_C += \ $(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \ $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal.c \ diff --git a/hw/bsp/stm32f7/family.mk b/hw/bsp/stm32f7/family.mk index a0f51df86..60d189a30 100644 --- a/hw/bsp/stm32f7/family.mk +++ b/hw/bsp/stm32f7/family.mk @@ -1,5 +1,9 @@ UF2_FAMILY_ID = 0x53b80f00 -FAMILY_SUBMODULES = hw/mcu/st/cmsis_device_f7 hw/mcu/st/stm32f7xx_hal_driver +ST_FAMILY = f7 +FAMILY_SUBMODULES = hw/mcu/st/cmsis_device_$(ST_FAMILY) hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver + +ST_CMSIS = hw/mcu/st/cmsis_device_$(ST_FAMILY) +ST_HAL_DRIVER = hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver include $(TOP)/$(BOARD_PATH)/board.mk @@ -29,10 +33,6 @@ endif # mcu driver cause following warnings CFLAGS += -Wno-error=shadow -Wno-error=cast-align -ST_FAMILY = f7 -ST_CMSIS = hw/mcu/st/cmsis_device_$(ST_FAMILY) -ST_HAL_DRIVER = hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver - SRC_C += \ $(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \ $(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal.c \ diff --git a/hw/bsp/stm32h7/family.mk b/hw/bsp/stm32h7/family.mk index efa9b1aca..5e3c7cf35 100644 --- a/hw/bsp/stm32h7/family.mk +++ b/hw/bsp/stm32h7/family.mk @@ -1,7 +1,7 @@ UF2_FAMILY_ID = 0x6db66082 -FAMILY_SUBMODULES = hw/mcu/st/cmsis_device_h7 hw/mcu/st/stm32h7xx_hal_driver - ST_FAMILY = h7 +FAMILY_SUBMODULES = hw/mcu/st/cmsis_device_$(ST_FAMILY) hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver + ST_CMSIS = hw/mcu/st/cmsis_device_$(ST_FAMILY) ST_HAL_DRIVER = hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver -- cgit v1.3.1