From 4b537a4f8c96519a3e77a63ff8ddbb3c528bd857 Mon Sep 17 00:00:00 2001 From: hathach Date: Thu, 2 May 2024 16:58:43 +0700 Subject: add cmake for kinetis k32l2 family --- .../kinetis_k32l2/FreeRTOSConfig/FreeRTOSConfig.h | 169 ++++++++++++++++ .../kinetis_k32l2/boards/frdm_k32l2a4s/board.cmake | 15 ++ hw/bsp/kinetis_k32l2/boards/frdm_k32l2a4s/board.h | 34 ++++ .../boards/frdm_k32l2a4s/clock_config.c | 2 +- .../boards/frdm_k32l2a4s/frdm_k32l2a4s.c | 171 ---------------- .../kinetis_k32l2/boards/frdm_k32l2b/board.cmake | 15 ++ hw/bsp/kinetis_k32l2/boards/frdm_k32l2b/board.h | 22 +++ .../boards/frdm_k32l2b/clock_config.c | 2 +- .../kinetis_k32l2/boards/frdm_k32l2b/frdm_k32l2b.c | 140 ------------- .../boards/kuiic/K32L2B31xxxxA_flash.ld | 216 --------------------- hw/bsp/kinetis_k32l2/boards/kuiic/board.cmake | 15 ++ hw/bsp/kinetis_k32l2/boards/kuiic/board.h | 20 ++ hw/bsp/kinetis_k32l2/boards/kuiic/board.mk | 2 +- hw/bsp/kinetis_k32l2/boards/kuiic/clock_config.c | 39 ++++ hw/bsp/kinetis_k32l2/boards/kuiic/clock_config.h | 14 ++ hw/bsp/kinetis_k32l2/boards/kuiic/kuiic.c | 203 ------------------- hw/bsp/kinetis_k32l2/boards/kuiic/kuiic.ld | 216 +++++++++++++++++++++ hw/bsp/kinetis_k32l2/family.c | 170 ++++++++++++++++ hw/bsp/kinetis_k32l2/family.cmake | 112 +++++++++++ hw/bsp/kinetis_k32l2/family.mk | 9 +- 20 files changed, 849 insertions(+), 737 deletions(-) create mode 100644 hw/bsp/kinetis_k32l2/FreeRTOSConfig/FreeRTOSConfig.h create mode 100644 hw/bsp/kinetis_k32l2/boards/frdm_k32l2a4s/board.cmake delete mode 100644 hw/bsp/kinetis_k32l2/boards/frdm_k32l2a4s/frdm_k32l2a4s.c create mode 100644 hw/bsp/kinetis_k32l2/boards/frdm_k32l2b/board.cmake delete mode 100644 hw/bsp/kinetis_k32l2/boards/frdm_k32l2b/frdm_k32l2b.c delete mode 100644 hw/bsp/kinetis_k32l2/boards/kuiic/K32L2B31xxxxA_flash.ld create mode 100644 hw/bsp/kinetis_k32l2/boards/kuiic/board.cmake create mode 100644 hw/bsp/kinetis_k32l2/boards/kuiic/clock_config.c create mode 100644 hw/bsp/kinetis_k32l2/boards/kuiic/clock_config.h delete mode 100644 hw/bsp/kinetis_k32l2/boards/kuiic/kuiic.c create mode 100644 hw/bsp/kinetis_k32l2/boards/kuiic/kuiic.ld create mode 100644 hw/bsp/kinetis_k32l2/family.c create mode 100644 hw/bsp/kinetis_k32l2/family.cmake diff --git a/hw/bsp/kinetis_k32l2/FreeRTOSConfig/FreeRTOSConfig.h b/hw/bsp/kinetis_k32l2/FreeRTOSConfig/FreeRTOSConfig.h new file mode 100644 index 000000000..133728596 --- /dev/null +++ b/hw/bsp/kinetis_k32l2/FreeRTOSConfig/FreeRTOSConfig.h @@ -0,0 +1,169 @@ +/* + * FreeRTOS Kernel V10.0.0 + * Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. If you wish to use our Amazon + * FreeRTOS name, please do so in a fair use way that does not cause confusion. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://www.FreeRTOS.org + * http://aws.amazon.com/freertos + * + * 1 tab == 4 spaces! + */ + + +#ifndef FREERTOS_CONFIG_H +#define FREERTOS_CONFIG_H + +/*----------------------------------------------------------- + * Application specific definitions. + * + * These definitions should be adjusted for your particular hardware and + * application requirements. + * + * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE + * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE. + * + * See http://www.freertos.org/a00110.html. + *----------------------------------------------------------*/ + +// skip if included from IAR assembler +#ifndef __IASMARM__ + #include "fsl_device_registers.h" +#endif + +/* Cortex M23/M33 port configuration. */ +#define configENABLE_MPU 0 +#if defined(__ARM_FP) && __ARM_FP >= 4 + #define configENABLE_FPU 1 +#else + #define configENABLE_FPU 0 +#endif +#define configENABLE_TRUSTZONE 0 +#define configMINIMAL_SECURE_STACK_SIZE (1024) + +#define configUSE_PREEMPTION 1 +#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0 +#define configCPU_CLOCK_HZ SystemCoreClock +#define configTICK_RATE_HZ ( 1000 ) +#define configMAX_PRIORITIES ( 5 ) +#define configMINIMAL_STACK_SIZE ( 128 ) +#define configTOTAL_HEAP_SIZE ( configSUPPORT_DYNAMIC_ALLOCATION*4*1024 ) +#define configMAX_TASK_NAME_LEN 16 +#define configUSE_16_BIT_TICKS 0 +#define configIDLE_SHOULD_YIELD 1 +#define configUSE_MUTEXES 1 +#define configUSE_RECURSIVE_MUTEXES 1 +#define configUSE_COUNTING_SEMAPHORES 1 +#define configQUEUE_REGISTRY_SIZE 2 +#define configUSE_QUEUE_SETS 0 +#define configUSE_TIME_SLICING 0 +#define configUSE_NEWLIB_REENTRANT 0 +#define configENABLE_BACKWARD_COMPATIBILITY 1 +#define configSTACK_ALLOCATION_FROM_SEPARATE_HEAP 0 + +#define configSUPPORT_STATIC_ALLOCATION 1 +#define configSUPPORT_DYNAMIC_ALLOCATION 0 + +/* Hook function related definitions. */ +#define configUSE_IDLE_HOOK 0 +#define configUSE_TICK_HOOK 0 +#define configUSE_MALLOC_FAILED_HOOK 0 // cause nested extern warning +#define configCHECK_FOR_STACK_OVERFLOW 2 + +/* Run time and task stats gathering related definitions. */ +#define configGENERATE_RUN_TIME_STATS 0 +#define configRECORD_STACK_HIGH_ADDRESS 1 +#define configUSE_TRACE_FACILITY 1 // legacy trace +#define configUSE_STATS_FORMATTING_FUNCTIONS 0 + +/* Co-routine definitions. */ +#define configUSE_CO_ROUTINES 0 +#define configMAX_CO_ROUTINE_PRIORITIES 2 + +/* Software timer related definitions. */ +#define configUSE_TIMERS 1 +#define configTIMER_TASK_PRIORITY (configMAX_PRIORITIES-2) +#define configTIMER_QUEUE_LENGTH 32 +#define configTIMER_TASK_STACK_DEPTH configMINIMAL_STACK_SIZE + +/* Optional functions - most linkers will remove unused functions anyway. */ +#define INCLUDE_vTaskPrioritySet 0 +#define INCLUDE_uxTaskPriorityGet 0 +#define INCLUDE_vTaskDelete 0 +#define INCLUDE_vTaskSuspend 1 // required for queue, semaphore, mutex to be blocked indefinitely with portMAX_DELAY +#define INCLUDE_xResumeFromISR 0 +#define INCLUDE_vTaskDelayUntil 1 +#define INCLUDE_vTaskDelay 1 +#define INCLUDE_xTaskGetSchedulerState 0 +#define INCLUDE_xTaskGetCurrentTaskHandle 1 +#define INCLUDE_uxTaskGetStackHighWaterMark 0 +#define INCLUDE_xTaskGetIdleTaskHandle 0 +#define INCLUDE_xTimerGetTimerDaemonTaskHandle 0 +#define INCLUDE_pcTaskGetTaskName 0 +#define INCLUDE_eTaskGetState 0 +#define INCLUDE_xEventGroupSetBitFromISR 0 +#define INCLUDE_xTimerPendFunctionCall 0 + +/* Define to trap errors during development. */ +// Halt CPU (breakpoint) when hitting error, only apply for Cortex M3, M4, M7 +#if defined(__ARM_ARCH_7M__) || defined (__ARM_ARCH_7EM__) + #define configASSERT(_exp) \ + do {\ + if ( !(_exp) ) { \ + volatile uint32_t* ARM_CM_DHCSR = ((volatile uint32_t*) 0xE000EDF0UL); /* Cortex M CoreDebug->DHCSR */ \ + if ( (*ARM_CM_DHCSR) & 1UL ) { /* Only halt mcu if debugger is attached */ \ + taskDISABLE_INTERRUPTS(); \ + __asm("BKPT #0\n"); \ + }\ + }\ + } while(0) +#else + #define configASSERT( x ) +#endif + +/* FreeRTOS hooks to NVIC vectors */ +#define xPortPendSVHandler PendSV_Handler +#define xPortSysTickHandler SysTick_Handler +#define vPortSVCHandler SVC_Handler + +//--------------------------------------------------------------------+ +// Interrupt nesting behavior configuration. +//--------------------------------------------------------------------+ + +// For Cortex-M specific: __NVIC_PRIO_BITS is defined in mcu header +#define configPRIO_BITS 4 + +/* The lowest interrupt priority that can be used in a call to a "set priority" function. */ +#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY ((1<SOPT5 = ((SIM->SOPT5 & + /* Mask bits to zero which are setting */ + (~(SIM_SOPT5_LPUART0TXSRC_MASK | SIM_SOPT5_LPUART0RXSRC_MASK))) + /* LPUART0 Transmit Data Source Select: LPUART0_TX pin. */ + | SIM_SOPT5_LPUART0TXSRC(SOPT5_LPUART0TXSRC_LPUART_TX) + /* LPUART0 Receive Data Source Select: LPUART_RX pin. */ + | SIM_SOPT5_LPUART0RXSRC(SOPT5_LPUART0RXSRC_LPUART_RX)); + + BOARD_BootClockRUN(); + SystemCoreClockUpdate(); + CLOCK_SetLpuart0Clock(1); +} #endif /* BOARD_H_ */ diff --git a/hw/bsp/kinetis_k32l2/boards/frdm_k32l2b/clock_config.c b/hw/bsp/kinetis_k32l2/boards/frdm_k32l2b/clock_config.c index e74000827..86eb42ef8 100644 --- a/hw/bsp/kinetis_k32l2/boards/frdm_k32l2b/clock_config.c +++ b/hw/bsp/kinetis_k32l2/boards/frdm_k32l2b/clock_config.c @@ -48,7 +48,7 @@ board: FRDM-K32L2B * Variables ******************************************************************************/ /* System clock frequency. */ -extern uint32_t SystemCoreClock; +//extern uint32_t SystemCoreClock; /******************************************************************************* ************************ BOARD_InitBootClocks function ************************ diff --git a/hw/bsp/kinetis_k32l2/boards/frdm_k32l2b/frdm_k32l2b.c b/hw/bsp/kinetis_k32l2/boards/frdm_k32l2b/frdm_k32l2b.c deleted file mode 100644 index 3f99b0cbd..000000000 --- a/hw/bsp/kinetis_k32l2/boards/frdm_k32l2b/frdm_k32l2b.c +++ /dev/null @@ -1,140 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2018, hathach (tinyusb.org) - * Copyright (c) 2020, Koji Kitayama - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "bsp/board_api.h" -#include "board.h" -#include "fsl_gpio.h" -#include "fsl_port.h" -#include "fsl_clock.h" -#include "fsl_lpuart.h" - -#include "clock_config.h" - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ -void USB0_IRQHandler(void) -{ - tud_int_handler(0); -} - -void board_init(void) -{ - /* Enable port clocks for UART/LED/Button pins */ - CLOCK_EnableClock(UART_PIN_CLOCK); - CLOCK_EnableClock(LED_PIN_CLOCK); - CLOCK_EnableClock(BUTTON_PIN_CLOCK); - - gpio_pin_config_t led_config = { kGPIO_DigitalOutput, 0 }; - GPIO_PinInit(LED_GPIO, LED_PIN, &led_config); - PORT_SetPinMux(LED_PORT, LED_PIN, kPORT_MuxAsGpio); - - gpio_pin_config_t button_config = { kGPIO_DigitalInput, 0 }; - GPIO_PinInit(BUTTON_GPIO, BUTTON_PIN, &button_config); - const port_pin_config_t BUTTON_CFG = { - kPORT_PullUp, - kPORT_FastSlewRate, - kPORT_PassiveFilterDisable, - kPORT_LowDriveStrength, - kPORT_MuxAsGpio - }; - PORT_SetPinConfig(BUTTON_PORT, BUTTON_PIN, &BUTTON_CFG); - - /* PORTA1 (pin 23) is configured as LPUART0_RX */ - PORT_SetPinMux(PORTA, 1U, kPORT_MuxAlt2); - /* PORTA2 (pin 24) is configured as LPUART0_TX */ - PORT_SetPinMux(PORTA, 2U, kPORT_MuxAlt2); - - SIM->SOPT5 = ((SIM->SOPT5 & - /* Mask bits to zero which are setting */ - (~(SIM_SOPT5_LPUART0TXSRC_MASK | SIM_SOPT5_LPUART0RXSRC_MASK))) - /* LPUART0 Transmit Data Source Select: LPUART0_TX pin. */ - | SIM_SOPT5_LPUART0TXSRC(SOPT5_LPUART0TXSRC_LPUART_TX) - /* LPUART0 Receive Data Source Select: LPUART_RX pin. */ - | SIM_SOPT5_LPUART0RXSRC(SOPT5_LPUART0RXSRC_LPUART_RX)); - - BOARD_BootClockRUN(); - SystemCoreClockUpdate(); - CLOCK_SetLpuart0Clock(1); - -#if CFG_TUSB_OS == OPT_OS_NONE - // 1ms tick timer - SysTick_Config(SystemCoreClock / 1000); -#elif CFG_TUSB_OS == OPT_OS_FREERTOS - // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) - NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); -#endif - - lpuart_config_t uart_config; - LPUART_GetDefaultConfig(&uart_config); - uart_config.baudRate_Bps = CFG_BOARD_UART_BAUDRATE; - uart_config.enableTx = true; - uart_config.enableRx = true; - LPUART_Init(UART_PORT, &uart_config, CLOCK_GetFreq(kCLOCK_McgIrc48MClk)); - - // USB - CLOCK_EnableUsbfs0Clock(kCLOCK_UsbSrcIrc48M, 48000000U); -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - GPIO_PinWrite(LED_GPIO, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON)); -} - -uint32_t board_button_read(void) -{ - return BUTTON_STATE_ACTIVE == GPIO_PinRead(BUTTON_GPIO, BUTTON_PIN); -} - -int board_uart_read(uint8_t* buf, int len) -{ - LPUART_ReadBlocking(UART_PORT, buf, len); - return len; -} - -int board_uart_write(void const * buf, int len) -{ - LPUART_WriteBlocking(UART_PORT, (uint8_t const*) buf, len); - return len; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void SysTick_Handler(void) -{ - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif diff --git a/hw/bsp/kinetis_k32l2/boards/kuiic/K32L2B31xxxxA_flash.ld b/hw/bsp/kinetis_k32l2/boards/kuiic/K32L2B31xxxxA_flash.ld deleted file mode 100644 index f478a99c7..000000000 --- a/hw/bsp/kinetis_k32l2/boards/kuiic/K32L2B31xxxxA_flash.ld +++ /dev/null @@ -1,216 +0,0 @@ -/* -** ################################################################### -** Processors: K32L2B31VFM0A -** K32L2B31VFT0A -** K32L2B31VLH0A -** K32L2B31VMP0A -** -** Compiler: GNU C Compiler -** Reference manual: K32L2B3xRM, Rev.0, July 2019 -** Version: rev. 1.0, 2019-07-30 -** Build: b190930 -** -** Abstract: -** Linker file for the GNU C Compiler -** -** Copyright 2016 Freescale Semiconductor, Inc. -** Copyright 2016-2019 NXP -** All rights reserved. -** -** SPDX-License-Identifier: BSD-3-Clause -** -** http: www.nxp.com -** mail: support@nxp.com -** -** ################################################################### -*/ - -/* Entry Point */ -ENTRY(Reset_Handler) - -HEAP_SIZE = DEFINED(__heap_size__) ? __heap_size__ : 0x0400; -STACK_SIZE = DEFINED(__stack_size__) ? __stack_size__ : 0x0400; - -/* Specify the memory areas */ -MEMORY -{ - m_interrupts (RX) : ORIGIN = 0x00008000, LENGTH = 0x00000200 - m_flash_config (RX) : ORIGIN = 0x00008400, LENGTH = 0x00000010 - m_text (RX) : ORIGIN = 0x00008410, LENGTH = 0x00037BF0 - m_data (RW) : ORIGIN = 0x1FFFE000, LENGTH = 0x00008000 -} - -/* Define output sections */ -SECTIONS -{ - /* The startup code goes first into internal flash */ - .interrupts : - { - . = ALIGN(4); - KEEP(*(.isr_vector)) /* Startup code */ - . = ALIGN(4); - } > m_interrupts - - .flash_config : - { - . = ALIGN(4); - KEEP(*(.FlashConfig)) /* Flash Configuration Field (FCF) */ - . = ALIGN(4); - } > m_flash_config - - /* The program code and other data goes into internal flash */ - .text : - { - . = ALIGN(4); - *(.text) /* .text sections (code) */ - *(.text*) /* .text* sections (code) */ - *(.rodata) /* .rodata sections (constants, strings, etc.) */ - *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ - *(.glue_7) /* glue arm to thumb code */ - *(.glue_7t) /* glue thumb to arm code */ - *(.eh_frame) - KEEP (*(.init)) - KEEP (*(.fini)) - . = ALIGN(4); - } > m_text - - .ARM.extab : - { - *(.ARM.extab* .gnu.linkonce.armextab.*) - } > m_text - - .ARM : - { - __exidx_start = .; - *(.ARM.exidx*) - __exidx_end = .; - } > m_text - - .ctors : - { - __CTOR_LIST__ = .; - /* gcc uses crtbegin.o to find the start of - the constructors, so we make sure it is - first. Because this is a wildcard, it - doesn't matter if the user does not - actually link against crtbegin.o; the - linker won't look for a file to match a - wildcard. The wildcard also means that it - doesn't matter which directory crtbegin.o - is in. */ - KEEP (*crtbegin.o(.ctors)) - KEEP (*crtbegin?.o(.ctors)) - /* We don't want to include the .ctor section from - from the crtend.o file until after the sorted ctors. - The .ctor section from the crtend file contains the - end of ctors marker and it must be last */ - KEEP (*(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)) - KEEP (*(SORT(.ctors.*))) - KEEP (*(.ctors)) - __CTOR_END__ = .; - } > m_text - - .dtors : - { - __DTOR_LIST__ = .; - KEEP (*crtbegin.o(.dtors)) - KEEP (*crtbegin?.o(.dtors)) - KEEP (*(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)) - KEEP (*(SORT(.dtors.*))) - KEEP (*(.dtors)) - __DTOR_END__ = .; - } > m_text - - .preinit_array : - { - PROVIDE_HIDDEN (__preinit_array_start = .); - KEEP (*(.preinit_array*)) - PROVIDE_HIDDEN (__preinit_array_end = .); - } > m_text - - .init_array : - { - PROVIDE_HIDDEN (__init_array_start = .); - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array*)) - PROVIDE_HIDDEN (__init_array_end = .); - } > m_text - - .fini_array : - { - PROVIDE_HIDDEN (__fini_array_start = .); - KEEP (*(SORT(.fini_array.*))) - KEEP (*(.fini_array*)) - PROVIDE_HIDDEN (__fini_array_end = .); - } > m_text - - __etext = .; /* define a global symbol at end of code */ - __DATA_ROM = .; /* Symbol is used by startup for data initialization */ - - /* reserve MTB memory at the beginning of m_data */ - .mtb : /* MTB buffer address as defined by the hardware */ - { - . = ALIGN(8); - _mtb_start = .; - KEEP(*(.mtb_buf)) /* need to KEEP Micro Trace Buffer as not referenced by application */ - . = ALIGN(8); - _mtb_end = .; - } > m_data - - .data : AT(__DATA_ROM) - { - . = ALIGN(4); - __DATA_RAM = .; - __data_start__ = .; /* create a global symbol at data start */ - *(.data) /* .data sections */ - *(.data*) /* .data* sections */ - KEEP(*(.jcr*)) - . = ALIGN(4); - __data_end__ = .; /* define a global symbol at data end */ - } > m_data - - __DATA_END = __DATA_ROM + (__data_end__ - __data_start__); - text_end = ORIGIN(m_text) + LENGTH(m_text); - ASSERT(__DATA_END <= text_end, "region m_text overflowed with text and data") - - /* Uninitialized data section */ - .bss : - { - /* This is used by the startup in order to initialize the .bss section */ - . = ALIGN(4); - __START_BSS = .; - __bss_start__ = .; - *(.bss) - *(.bss*) - *(COMMON) - . = ALIGN(4); - __bss_end__ = .; - __END_BSS = .; - } > m_data - - .heap : - { - . = ALIGN(8); - __end__ = .; - PROVIDE(end = .); - __HeapBase = .; - . += HEAP_SIZE; - __HeapLimit = .; - __heap_limit = .; /* Add for _sbrk */ - } > m_data - - .stack : - { - . = ALIGN(8); - . += STACK_SIZE; - } > m_data - - /* Initializes stack on the end of block */ - __StackTop = ORIGIN(m_data) + LENGTH(m_data); - __StackLimit = __StackTop - STACK_SIZE; - PROVIDE(__stack = __StackTop); - - .ARM.attributes 0 : { *(.ARM.attributes) } - - ASSERT(__StackLimit >= __HeapLimit, "region m_data overflowed with stack and heap") -} diff --git a/hw/bsp/kinetis_k32l2/boards/kuiic/board.cmake b/hw/bsp/kinetis_k32l2/boards/kuiic/board.cmake new file mode 100644 index 000000000..cf14000ac --- /dev/null +++ b/hw/bsp/kinetis_k32l2/boards/kuiic/board.cmake @@ -0,0 +1,15 @@ +set(MCU_VARIANT K32L2B31A) + +set(JLINK_DEVICE K32L2B31xxxxA) +set(PYOCD_TARGET K32L2B) + +set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/kuiic.ld) + +function(update_board TARGET) + target_sources(${TARGET} PUBLIC + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/clock_config.c + ) + target_compile_definitions(${TARGET} PUBLIC + CPU_K32L2B31VLH0A + ) +endfunction() diff --git a/hw/bsp/kinetis_k32l2/boards/kuiic/board.h b/hw/bsp/kinetis_k32l2/boards/kuiic/board.h index 1e2d4f18b..ec3702376 100644 --- a/hw/bsp/kinetis_k32l2/boards/kuiic/board.h +++ b/hw/bsp/kinetis_k32l2/boards/kuiic/board.h @@ -30,6 +30,8 @@ #include "fsl_device_registers.h" +#define USB_CLOCK_SOURCE kCLOCK_UsbSrcIrc48M + // LED #define LED_PIN_CLOCK kCLOCK_PortA #define LED_GPIO GPIOA @@ -42,4 +44,22 @@ #define UART_PIN_RX 3u #define UART_PIN_TX 0u +#define UART_CLOCK_SOURCE_HZ CLOCK_GetFreq(kCLOCK_McgIrc48MClk) + +static inline void BOARD_InitBootPins(void) { + /* PORTC3 is configured as LPUART0_RX */ + PORT_SetPinMux(PORTC, 3U, kPORT_MuxAlt3); + /* PORTA2 (pin 24) is configured as LPUART0_TX */ + PORT_SetPinMux(PORTE, 0U, kPORT_MuxAlt3); + + SIM->SOPT5 = ((SIM->SOPT5 & + /* Mask bits to zero which are setting */ + (~(SIM_SOPT5_LPUART1TXSRC_MASK | SIM_SOPT5_LPUART1RXSRC_MASK))) + /* LPUART0 Transmit Data Source Select: LPUART0_TX pin. */ + | SIM_SOPT5_LPUART1TXSRC(SOPT5_LPUART1TXSRC_LPUART_TX) + /* LPUART0 Receive Data Source Select: LPUART_RX pin. */ + | SIM_SOPT5_LPUART1RXSRC(SOPT5_LPUART1RXSRC_LPUART_RX)); + CLOCK_SetLpuart1Clock(1); +} + #endif /* BOARD_H_ */ diff --git a/hw/bsp/kinetis_k32l2/boards/kuiic/board.mk b/hw/bsp/kinetis_k32l2/boards/kuiic/board.mk index fc5bdeec8..2bc5b1e34 100644 --- a/hw/bsp/kinetis_k32l2/boards/kuiic/board.mk +++ b/hw/bsp/kinetis_k32l2/boards/kuiic/board.mk @@ -6,7 +6,7 @@ CFLAGS += -DCPU_K32L2B31VLH0A CFLAGS += -Wno-error=unused-parameter -Wno-error=redundant-decls # All source paths should be relative to the top level. -LD_FILE = $(BOARD_PATH)/K32L2B31xxxxA_flash.ld +LD_FILE = $(BOARD_PATH)/kuiic.ld # For flash-jlink target JLINK_DEVICE = K32L2B31xxxxA diff --git a/hw/bsp/kinetis_k32l2/boards/kuiic/clock_config.c b/hw/bsp/kinetis_k32l2/boards/kuiic/clock_config.c new file mode 100644 index 000000000..c1a6d1a8d --- /dev/null +++ b/hw/bsp/kinetis_k32l2/boards/kuiic/clock_config.c @@ -0,0 +1,39 @@ +#include "clock_config.h" +#include "fsl_clock.h" + +/******************************************************************************* + * Variables + ******************************************************************************/ +/* System clock frequency. */ +// extern uint32_t SystemCoreClock; + +/******************************************************************************* + * Variables for BOARD_BootClockRUN configuration + ******************************************************************************/ +const mcglite_config_t mcgliteConfig_BOARD_BootClockRUN = { + .outSrc = kMCGLITE_ClkSrcHirc, /* MCGOUTCLK source is HIRC */ + .irclkEnableMode = kMCGLITE_IrclkEnable, /* MCGIRCLK enabled, MCGIRCLK disabled in STOP mode */ + .ircs = kMCGLITE_Lirc8M, /* Slow internal reference (LIRC) 8 MHz clock selected */ + .fcrdiv = kMCGLITE_LircDivBy1, /* Low-frequency Internal Reference Clock Divider: divided by 1 */ + .lircDiv2 = kMCGLITE_LircDivBy1, /* Second Low-frequency Internal Reference Clock Divider: divided by 1 */ + .hircEnableInNotHircMode = true, /* HIRC source is enabled */ +}; +const sim_clock_config_t simConfig_BOARD_BootClockRUN = { + .er32kSrc = SIM_OSC32KSEL_LPO_CLK, /* OSC32KSEL select: LPO clock */ + .clkdiv1 = 0x10000U, /* SIM_CLKDIV1 - OUTDIV1: /1, OUTDIV4: /2 */ +}; + +/******************************************************************************* + * Code for BOARD_BootClockRUN configuration + ******************************************************************************/ +void BOARD_BootClockRUN(void) +{ + /* Set the system clock dividers in SIM to safe value. */ + CLOCK_SetSimSafeDivs(); + /* Set MCG to HIRC mode. */ + CLOCK_SetMcgliteConfig(&mcgliteConfig_BOARD_BootClockRUN); + /* Set the clock configuration in SIM module. */ + CLOCK_SetSimConfig(&simConfig_BOARD_BootClockRUN); + /* Set SystemCoreClock variable. */ + SystemCoreClock = BOARD_BOOTCLOCKRUN_CORE_CLOCK; +} diff --git a/hw/bsp/kinetis_k32l2/boards/kuiic/clock_config.h b/hw/bsp/kinetis_k32l2/boards/kuiic/clock_config.h new file mode 100644 index 000000000..920cad98f --- /dev/null +++ b/hw/bsp/kinetis_k32l2/boards/kuiic/clock_config.h @@ -0,0 +1,14 @@ +#ifndef CLOCK_CONFIG_H +#define CLOCK_CONFIG_H + +/******************************************************************************* + * Definitions + ******************************************************************************/ +#define SIM_OSC32KSEL_LPO_CLK 3U /*!< OSC32KSEL select: LPO clock */ +#define SOPT5_LPUART1RXSRC_LPUART_RX 0x00u /*!<@brief LPUART1 Receive Data Source Select: LPUART_RX pin */ +#define SOPT5_LPUART1TXSRC_LPUART_TX 0x00u /*!<@brief LPUART1 Transmit Data Source Select: LPUART_TX pin */ +#define BOARD_BOOTCLOCKRUN_CORE_CLOCK 48000000U /*!< Core clock frequency: 48000000Hz */ + +void BOARD_BootClockRUN(void); + +#endif diff --git a/hw/bsp/kinetis_k32l2/boards/kuiic/kuiic.c b/hw/bsp/kinetis_k32l2/boards/kuiic/kuiic.c deleted file mode 100644 index b83d5c820..000000000 --- a/hw/bsp/kinetis_k32l2/boards/kuiic/kuiic.c +++ /dev/null @@ -1,203 +0,0 @@ -/* - * The MIT License (MIT) - * - * Copyright (c) 2018, hathach (tinyusb.org) - * Copyright (c) 2020, Koji Kitayama - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN - * THE SOFTWARE. - * - * This file is part of the TinyUSB stack. - */ - -#include "bsp/board_api.h" -#include "board.h" -#include "fsl_smc.h" -#include "fsl_gpio.h" -#include "fsl_port.h" -#include "fsl_clock.h" -#include "fsl_lpuart.h" - -/******************************************************************************* - * Definitions - ******************************************************************************/ -#define SIM_OSC32KSEL_LPO_CLK 3U /*!< OSC32KSEL select: LPO clock */ -#define SOPT5_LPUART1RXSRC_LPUART_RX 0x00u /*!<@brief LPUART1 Receive Data Source Select: LPUART_RX pin */ -#define SOPT5_LPUART1TXSRC_LPUART_TX 0x00u /*!<@brief LPUART1 Transmit Data Source Select: LPUART_TX pin */ -#define BOARD_BOOTCLOCKRUN_CORE_CLOCK 48000000U /*!< Core clock frequency: 48000000Hz */ - -/******************************************************************************* - * Variables - ******************************************************************************/ -/* System clock frequency. */ -// extern uint32_t SystemCoreClock; - -/******************************************************************************* - * Variables for BOARD_BootClockRUN configuration - ******************************************************************************/ -const mcglite_config_t mcgliteConfig_BOARD_BootClockRUN = { - .outSrc = kMCGLITE_ClkSrcHirc, /* MCGOUTCLK source is HIRC */ - .irclkEnableMode = kMCGLITE_IrclkEnable, /* MCGIRCLK enabled, MCGIRCLK disabled in STOP mode */ - .ircs = kMCGLITE_Lirc8M, /* Slow internal reference (LIRC) 8 MHz clock selected */ - .fcrdiv = kMCGLITE_LircDivBy1, /* Low-frequency Internal Reference Clock Divider: divided by 1 */ - .lircDiv2 = kMCGLITE_LircDivBy1, /* Second Low-frequency Internal Reference Clock Divider: divided by 1 */ - .hircEnableInNotHircMode = true, /* HIRC source is enabled */ -}; -const sim_clock_config_t simConfig_BOARD_BootClockRUN = { - .er32kSrc = SIM_OSC32KSEL_LPO_CLK, /* OSC32KSEL select: LPO clock */ - .clkdiv1 = 0x10000U, /* SIM_CLKDIV1 - OUTDIV1: /1, OUTDIV4: /2 */ -}; - -/******************************************************************************* - * Code for BOARD_BootClockRUN configuration - ******************************************************************************/ -void BOARD_BootClockRUN(void) -{ - /* Set the system clock dividers in SIM to safe value. */ - CLOCK_SetSimSafeDivs(); - /* Set MCG to HIRC mode. */ - CLOCK_SetMcgliteConfig(&mcgliteConfig_BOARD_BootClockRUN); - /* Set the clock configuration in SIM module. */ - CLOCK_SetSimConfig(&simConfig_BOARD_BootClockRUN); - /* Set SystemCoreClock variable. */ - SystemCoreClock = BOARD_BOOTCLOCKRUN_CORE_CLOCK; -} - - -//--------------------------------------------------------------------+ -// Forward USB interrupt events to TinyUSB IRQ Handler -//--------------------------------------------------------------------+ -void USB0_IRQHandler(void) -{ - tud_int_handler(0); -} - -void board_init(void) -{ - /* Enable port clocks for GPIO pins */ - CLOCK_EnableClock(kCLOCK_PortA); - CLOCK_EnableClock(kCLOCK_PortB); - CLOCK_EnableClock(kCLOCK_PortC); - CLOCK_EnableClock(kCLOCK_PortD); - CLOCK_EnableClock(kCLOCK_PortE); - - - gpio_pin_config_t led_config = { kGPIO_DigitalOutput, 1 }; - GPIO_PinInit(GPIOA, 1U, &led_config); - PORT_SetPinMux(PORTA, 1U, kPORT_MuxAsGpio); - led_config.outputLogic = 0; - GPIO_PinInit(GPIOA, 2U, &led_config); - PORT_SetPinMux(PORTA, 2U, kPORT_MuxAsGpio); - -#ifdef BUTTON_PIN - gpio_pin_config_t button_config = { kGPIO_DigitalInput, 0 }; - GPIO_PinInit(BUTTON_GPIO, BUTTON_PIN, &button_config); - const port_pin_config_t BUTTON_CFG = { - kPORT_PullUp, - kPORT_FastSlewRate, - kPORT_PassiveFilterDisable, - kPORT_LowDriveStrength, - kPORT_MuxAsGpio - }; - PORT_SetPinConfig(BUTTON_PORT, BUTTON_PIN, &BUTTON_CFG); -#endif - - /* PORTC3 is configured as LPUART0_RX */ - PORT_SetPinMux(PORTC, 3U, kPORT_MuxAlt3); - /* PORTA2 (pin 24) is configured as LPUART0_TX */ - PORT_SetPinMux(PORTE, 0U, kPORT_MuxAlt3); - - SIM->SOPT5 = ((SIM->SOPT5 & - /* Mask bits to zero which are setting */ - (~(SIM_SOPT5_LPUART1TXSRC_MASK | SIM_SOPT5_LPUART1RXSRC_MASK))) - /* LPUART0 Transmit Data Source Select: LPUART0_TX pin. */ - | SIM_SOPT5_LPUART1TXSRC(SOPT5_LPUART1TXSRC_LPUART_TX) - /* LPUART0 Receive Data Source Select: LPUART_RX pin. */ - | SIM_SOPT5_LPUART1RXSRC(SOPT5_LPUART1RXSRC_LPUART_RX)); - - BOARD_BootClockRUN(); - SystemCoreClockUpdate(); - CLOCK_SetLpuart1Clock(1); - -#if CFG_TUSB_OS == OPT_OS_NONE - // 1ms tick timer - SysTick_Config(SystemCoreClock / 1000); -#elif CFG_TUSB_OS == OPT_OS_FREERTOS - // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) - NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); -#endif - - lpuart_config_t uart_config; - LPUART_GetDefaultConfig(&uart_config); - uart_config.baudRate_Bps = CFG_BOARD_UART_BAUDRATE; - uart_config.enableTx = true; - uart_config.enableRx = true; - LPUART_Init(UART_PORT, &uart_config, CLOCK_GetFreq(kCLOCK_McgIrc48MClk)); - - // USB - CLOCK_EnableUsbfs0Clock(kCLOCK_UsbSrcIrc48M, 48000000U); -} - -//--------------------------------------------------------------------+ -// Board porting API -//--------------------------------------------------------------------+ - -void board_led_write(bool state) -{ - if (state) { - LED_GPIO->PDDR |= GPIO_FIT_REG((1UL << LED_PIN)); - } else { - LED_GPIO->PDDR &= GPIO_FIT_REG(~(1UL << LED_PIN)); - } -// GPIO_PinWrite(GPIOA, 1, state ? LED_STATE_ON : (1-LED_STATE_ON) ); -// GPIO_PinWrite(GPIOA, 2, state ? (1-LED_STATE_ON) : LED_STATE_ON ); -} - -uint32_t board_button_read(void) -{ -#ifdef BUTTON_PIN - return BUTTON_STATE_ACTIVE == GPIO_PinRead(BUTTON_GPIO, BUTTON_PIN); -#else - return 0; -#endif -} - -int board_uart_read(uint8_t* buf, int len) -{ - LPUART_ReadBlocking(UART_PORT, buf, len); - return len; -} - -int board_uart_write(void const * buf, int len) -{ - LPUART_WriteBlocking(UART_PORT, (uint8_t const*) buf, len); - return len; -} - -#if CFG_TUSB_OS == OPT_OS_NONE -volatile uint32_t system_ticks = 0; -void SysTick_Handler(void) -{ - system_ticks++; -} - -uint32_t board_millis(void) -{ - return system_ticks; -} -#endif diff --git a/hw/bsp/kinetis_k32l2/boards/kuiic/kuiic.ld b/hw/bsp/kinetis_k32l2/boards/kuiic/kuiic.ld new file mode 100644 index 000000000..f478a99c7 --- /dev/null +++ b/hw/bsp/kinetis_k32l2/boards/kuiic/kuiic.ld @@ -0,0 +1,216 @@ +/* +** ################################################################### +** Processors: K32L2B31VFM0A +** K32L2B31VFT0A +** K32L2B31VLH0A +** K32L2B31VMP0A +** +** Compiler: GNU C Compiler +** Reference manual: K32L2B3xRM, Rev.0, July 2019 +** Version: rev. 1.0, 2019-07-30 +** Build: b190930 +** +** Abstract: +** Linker file for the GNU C Compiler +** +** Copyright 2016 Freescale Semiconductor, Inc. +** Copyright 2016-2019 NXP +** All rights reserved. +** +** SPDX-License-Identifier: BSD-3-Clause +** +** http: www.nxp.com +** mail: support@nxp.com +** +** ################################################################### +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +HEAP_SIZE = DEFINED(__heap_size__) ? __heap_size__ : 0x0400; +STACK_SIZE = DEFINED(__stack_size__) ? __stack_size__ : 0x0400; + +/* Specify the memory areas */ +MEMORY +{ + m_interrupts (RX) : ORIGIN = 0x00008000, LENGTH = 0x00000200 + m_flash_config (RX) : ORIGIN = 0x00008400, LENGTH = 0x00000010 + m_text (RX) : ORIGIN = 0x00008410, LENGTH = 0x00037BF0 + m_data (RW) : ORIGIN = 0x1FFFE000, LENGTH = 0x00008000 +} + +/* Define output sections */ +SECTIONS +{ + /* The startup code goes first into internal flash */ + .interrupts : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } > m_interrupts + + .flash_config : + { + . = ALIGN(4); + KEEP(*(.FlashConfig)) /* Flash Configuration Field (FCF) */ + . = ALIGN(4); + } > m_flash_config + + /* The program code and other data goes into internal flash */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + KEEP (*(.init)) + KEEP (*(.fini)) + . = ALIGN(4); + } > m_text + + .ARM.extab : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } > m_text + + .ARM : + { + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + } > m_text + + .ctors : + { + __CTOR_LIST__ = .; + /* gcc uses crtbegin.o to find the start of + the constructors, so we make sure it is + first. Because this is a wildcard, it + doesn't matter if the user does not + actually link against crtbegin.o; the + linker won't look for a file to match a + wildcard. The wildcard also means that it + doesn't matter which directory crtbegin.o + is in. */ + KEEP (*crtbegin.o(.ctors)) + KEEP (*crtbegin?.o(.ctors)) + /* We don't want to include the .ctor section from + from the crtend.o file until after the sorted ctors. + The .ctor section from the crtend file contains the + end of ctors marker and it must be last */ + KEEP (*(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)) + KEEP (*(SORT(.ctors.*))) + KEEP (*(.ctors)) + __CTOR_END__ = .; + } > m_text + + .dtors : + { + __DTOR_LIST__ = .; + KEEP (*crtbegin.o(.dtors)) + KEEP (*crtbegin?.o(.dtors)) + KEEP (*(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)) + KEEP (*(SORT(.dtors.*))) + KEEP (*(.dtors)) + __DTOR_END__ = .; + } > m_text + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } > m_text + + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + } > m_text + + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(SORT(.fini_array.*))) + KEEP (*(.fini_array*)) + PROVIDE_HIDDEN (__fini_array_end = .); + } > m_text + + __etext = .; /* define a global symbol at end of code */ + __DATA_ROM = .; /* Symbol is used by startup for data initialization */ + + /* reserve MTB memory at the beginning of m_data */ + .mtb : /* MTB buffer address as defined by the hardware */ + { + . = ALIGN(8); + _mtb_start = .; + KEEP(*(.mtb_buf)) /* need to KEEP Micro Trace Buffer as not referenced by application */ + . = ALIGN(8); + _mtb_end = .; + } > m_data + + .data : AT(__DATA_ROM) + { + . = ALIGN(4); + __DATA_RAM = .; + __data_start__ = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + KEEP(*(.jcr*)) + . = ALIGN(4); + __data_end__ = .; /* define a global symbol at data end */ + } > m_data + + __DATA_END = __DATA_ROM + (__data_end__ - __data_start__); + text_end = ORIGIN(m_text) + LENGTH(m_text); + ASSERT(__DATA_END <= text_end, "region m_text overflowed with text and data") + + /* Uninitialized data section */ + .bss : + { + /* This is used by the startup in order to initialize the .bss section */ + . = ALIGN(4); + __START_BSS = .; + __bss_start__ = .; + *(.bss) + *(.bss*) + *(COMMON) + . = ALIGN(4); + __bss_end__ = .; + __END_BSS = .; + } > m_data + + .heap : + { + . = ALIGN(8); + __end__ = .; + PROVIDE(end = .); + __HeapBase = .; + . += HEAP_SIZE; + __HeapLimit = .; + __heap_limit = .; /* Add for _sbrk */ + } > m_data + + .stack : + { + . = ALIGN(8); + . += STACK_SIZE; + } > m_data + + /* Initializes stack on the end of block */ + __StackTop = ORIGIN(m_data) + LENGTH(m_data); + __StackLimit = __StackTop - STACK_SIZE; + PROVIDE(__stack = __StackTop); + + .ARM.attributes 0 : { *(.ARM.attributes) } + + ASSERT(__StackLimit >= __HeapLimit, "region m_data overflowed with stack and heap") +} diff --git a/hw/bsp/kinetis_k32l2/family.c b/hw/bsp/kinetis_k32l2/family.c new file mode 100644 index 000000000..92f5ba6d3 --- /dev/null +++ b/hw/bsp/kinetis_k32l2/family.c @@ -0,0 +1,170 @@ +/* + * The MIT License (MIT) + * + * Copyright (c) 2018, hathach (tinyusb.org) + * Copyright (c) 2020, Koji Kitayama + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * This file is part of the TinyUSB stack. + */ + +#include "fsl_gpio.h" +#include "fsl_port.h" +#include "fsl_clock.h" +#include "fsl_lpuart.h" + +#include "clock_config.h" +#include "bsp/board_api.h" +#include "board.h" + + +//--------------------------------------------------------------------+ +// Forward USB interrupt events to TinyUSB IRQ Handler +//--------------------------------------------------------------------+ +void USB0_IRQHandler(void) { + tud_int_handler(0); +} + +void board_init(void) { + /* Enable port clocks for GPIO pins */ + CLOCK_EnableClock(kCLOCK_PortA); + CLOCK_EnableClock(kCLOCK_PortB); + CLOCK_EnableClock(kCLOCK_PortC); + CLOCK_EnableClock(kCLOCK_PortD); + CLOCK_EnableClock(kCLOCK_PortE); + + BOARD_InitBootPins(); + BOARD_BootClockRUN(); + SystemCoreClockUpdate(); + + gpio_pin_config_t led_config = {kGPIO_DigitalOutput, 0}; + GPIO_PinInit(LED_GPIO, LED_PIN, &led_config); + PORT_SetPinMux(LED_PORT, LED_PIN, kPORT_MuxAsGpio); + +#ifdef BUTTON_PIN + gpio_pin_config_t button_config = {kGPIO_DigitalInput, 0}; + GPIO_PinInit(BUTTON_GPIO, BUTTON_PIN, &button_config); + const port_pin_config_t BUTTON_CFG = { + kPORT_PullUp, + kPORT_FastSlewRate, + kPORT_PassiveFilterDisable, +#if defined(FSL_FEATURE_PORT_HAS_OPEN_DRAIN) && FSL_FEATURE_PORT_HAS_OPEN_DRAIN + kPORT_OpenDrainDisable, +#endif + kPORT_LowDriveStrength, + kPORT_MuxAsGpio, +#if defined(FSL_FEATURE_PORT_HAS_PIN_CONTROL_LOCK) && FSL_FEATURE_PORT_HAS_PIN_CONTROL_LOCK + kPORT_UnlockRegister +#endif + }; + PORT_SetPinConfig(BUTTON_PORT, BUTTON_PIN, &BUTTON_CFG); +#endif + +#if CFG_TUSB_OS == OPT_OS_NONE + // 1ms tick timer + SysTick_Config(SystemCoreClock / 1000); +#elif CFG_TUSB_OS == OPT_OS_FREERTOS + // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher ) + NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY ); +#endif + + lpuart_config_t uart_config; + LPUART_GetDefaultConfig(&uart_config); + uart_config.baudRate_Bps = CFG_BOARD_UART_BAUDRATE; + uart_config.enableTx = true; + uart_config.enableRx = true; + LPUART_Init(UART_PORT, &uart_config, UART_CLOCK_SOURCE_HZ); + + // USB + CLOCK_EnableUsbfs0Clock(USB_CLOCK_SOURCE, 48000000U); +} + +//--------------------------------------------------------------------+ +// Board porting API +//--------------------------------------------------------------------+ + +void board_led_write(bool state) { + GPIO_PinWrite(LED_GPIO, LED_PIN, state ? LED_STATE_ON : (1 - LED_STATE_ON)); +} + +uint32_t board_button_read(void) { +#ifdef BUTTON_PIN + return BUTTON_STATE_ACTIVE == GPIO_PinRead(BUTTON_GPIO, BUTTON_PIN); +#else + return 0; +#endif +} + +int board_uart_read(uint8_t* buf, int len) { +#if 0 /* + Use this version if want the LED to blink during BOARD=board_test, + without having to hit a key. + */ + if( 0U != (kLPUART_RxDataRegFullFlag & LPUART_GetStatusFlags( UART_PORT )) ) + { + LPUART_ReadBlocking(UART_PORT, buf, len); + return len; + } + + return( 0 ); +#else /* Wait for 'len' characters to come in */ + + LPUART_ReadBlocking(UART_PORT, buf, len); + return len; + +#endif +} + +int board_uart_write(void const* buf, int len) { + LPUART_WriteBlocking(UART_PORT, (uint8_t const*) buf, len); + return len; +} + +#if CFG_TUSB_OS == OPT_OS_NONE +volatile uint32_t system_ticks = 0; + +void SysTick_Handler(void) { + system_ticks++; +} + +uint32_t board_millis(void) { + return system_ticks; +} + +#endif + +#ifndef __ICCARM__ +// Implement _start() since we use linker flag '-nostartfiles'. +// Requires defined __STARTUP_CLEAR_BSS, +extern int main(void); + +TU_ATTR_UNUSED void _start(void) { + // called by startup code + main(); + while (1) {} +} + +#ifdef __clang__ +void _exit (int __status) { + while (1) {} +} +#endif + +#endif diff --git a/hw/bsp/kinetis_k32l2/family.cmake b/hw/bsp/kinetis_k32l2/family.cmake new file mode 100644 index 000000000..406ae99d3 --- /dev/null +++ b/hw/bsp/kinetis_k32l2/family.cmake @@ -0,0 +1,112 @@ +include_guard() + +set(SDK_DIR ${TOP}/hw/mcu/nxp/mcux-sdk) +set(CMSIS_DIR ${TOP}/lib/CMSIS_5) + +# include board specific +include(${CMAKE_CURRENT_LIST_DIR}/boards/${BOARD}/board.cmake) + +# toolchain set up +set(CMAKE_SYSTEM_PROCESSOR cortex-m0plus CACHE INTERNAL "System Processor") +set(CMAKE_TOOLCHAIN_FILE ${TOP}/examples/build_system/cmake/toolchain/arm_${TOOLCHAIN}.cmake) + +set(FAMILY_MCUS KINETIS_K32L CACHE INTERNAL "") + + +#------------------------------------ +# BOARD_TARGET +#------------------------------------ +# only need to be built ONCE for all examples +function(add_board_target BOARD_TARGET) + if (TARGET ${BOARD_TARGET}) + return() + endif () + + # LD_FILE and STARTUP_FILE can be defined in board.cmake + set(LD_FILE_Clang ${LD_FILE_GNU}) + set(STARTUP_FILE_GNU ${SDK_DIR}/devices/${MCU_VARIANT}/gcc/startup_${MCU_VARIANT}.S) + set(STARTUP_FILE_Clang ${STARTUP_FILE_GNU}) + + add_library(${BOARD_TARGET} STATIC + ${STARTUP_FILE_${CMAKE_C_COMPILER_ID}} + ${SDK_DIR}/drivers/gpio/fsl_gpio.c + ${SDK_DIR}/drivers/lpuart/fsl_lpuart.c + ${SDK_DIR}/devices/${MCU_VARIANT}/drivers/fsl_clock.c + ${SDK_DIR}/devices/${MCU_VARIANT}/system_${MCU_VARIANT}.c + ) + target_compile_definitions(${BOARD_TARGET} PUBLIC + __STARTUP_CLEAR_BSS + ) + target_include_directories(${BOARD_TARGET} PUBLIC + ${CMSIS_DIR}/CMSIS/Core/Include + ${SDK_DIR}/devices/${MCU_VARIANT} + ${SDK_DIR}/devices/${MCU_VARIANT}/drivers + ${SDK_DIR}/drivers/common + ${SDK_DIR}/drivers/gpio + ${SDK_DIR}/drivers/lpuart + ${SDK_DIR}/drivers/port + ${SDK_DIR}/drivers/smc + ) + + update_board(${BOARD_TARGET}) + + if (CMAKE_C_COMPILER_ID STREQUAL "GNU") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + --specs=nosys.specs --specs=nano.specs + -nostartfiles + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "Clang") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--script=${LD_FILE_GNU}" + ) + elseif (CMAKE_C_COMPILER_ID STREQUAL "IAR") + target_link_options(${BOARD_TARGET} PUBLIC + "LINKER:--config=${LD_FILE_IAR}" + ) + endif () +endfunction() + + +#------------------------------------ +# Functions +#------------------------------------ +function(family_configure_example TARGET RTOS) + family_configure_common(${TARGET} ${RTOS}) + + # Board target + add_board_target(board_${BOARD}) + + #---------- Port Specific ---------- + # These files are built for each example since it depends on example's tusb_config.h + target_sources(${TARGET} PUBLIC + # BSP + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/family.c + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../board.c + ) + target_include_directories(${TARGET} PUBLIC + # family, hw, board + ${CMAKE_CURRENT_FUNCTION_LIST_DIR} + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/../../ + ${CMAKE_CURRENT_FUNCTION_LIST_DIR}/boards/${BOARD} + ) + + # Add TinyUSB target and port source + family_add_tinyusb(${TARGET} OPT_MCU_KINETIS_K32L ${RTOS}) + target_sources(${TARGET}-tinyusb PUBLIC + ${TOP}/src/portable/nxp/khci/dcd_khci.c + ${TOP}/src/portable/nxp/khci/hcd_khci.c + ) + target_link_libraries(${TARGET}-tinyusb PUBLIC board_${BOARD}) + + # Link dependencies + target_link_libraries(${TARGET} PUBLIC board_${BOARD} ${TARGET}-tinyusb) + + # Flashing + family_flash_jlink(${TARGET}) + + if (DEFINED TEENSY_MCU) + family_add_bin_hex(${TARGET}) + family_flash_teensy(${TARGET}) + endif () +endfunction() diff --git a/hw/bsp/kinetis_k32l2/family.mk b/hw/bsp/kinetis_k32l2/family.mk index 0bfd57d29..e18348d4d 100644 --- a/hw/bsp/kinetis_k32l2/family.mk +++ b/hw/bsp/kinetis_k32l2/family.mk @@ -1,6 +1,5 @@ UF2_FAMILY_ID = 0x7f83e793 SDK_DIR = hw/mcu/nxp/mcux-sdk -DEPS_SUBMODULES += $(SDK_DIR) lib/CMSIS_5 MCU_DIR = $(SDK_DIR)/devices/$(MCU) include $(TOP)/$(BOARD_PATH)/board.mk @@ -9,7 +8,9 @@ CPU_CORE ?= cortex-m0plus CFLAGS += \ -DCFG_TUSB_MCU=OPT_MCU_KINETIS_K32L -LDFLAGS_GCC += -specs=nosys.specs -specs=nano.specs +LDFLAGS_GCC += \ + -nostartfiles \ + -specs=nosys.specs -specs=nano.specs SRC_C += \ src/portable/nxp/khci/dcd_khci.c \ @@ -25,10 +26,10 @@ INC += \ $(TOP)/$(MCU_DIR) \ $(TOP)/$(MCU_DIR)/project_template \ $(TOP)/$(MCU_DIR)/drivers \ - $(TOP)/$(SDK_DIR)/drivers/smc \ $(TOP)/$(SDK_DIR)/drivers/common \ $(TOP)/$(SDK_DIR)/drivers/gpio \ - $(TOP)/$(SDK_DIR)/drivers/port \ $(TOP)/$(SDK_DIR)/drivers/lpuart \ + $(TOP)/$(SDK_DIR)/drivers/port \ + $(TOP)/$(SDK_DIR)/drivers/smc \ SRC_S += $(MCU_DIR)/gcc/startup_$(MCU).S -- cgit v1.3.1